shaochan.liu [Fri, 12 Jul 2019 05:20:52 +0000 (13:20 +0800)]
lcd: tcon: set od function [2/2]
PD#TV-7435
Problem:
when enable od function, the left half of the screen
display is abnormal after boot
Solution:
set od function
Verify:
x301
Change-Id: Ibe4f2e7e5d9bc46c6ce880715103e2cc69d4625b
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
hualing chen [Wed, 3 Jul 2019 06:21:20 +0000 (14:21 +0800)]
dvb: ci mcu: control CAM throw mcu and used api to control mcu. [2/9]
PD#SWPL-10659
Problem:
tsin and tsout pin not config.
ci mcu dts not add config.
Solution:
1 add tsin and tsout pinmux config.
2 add ci mcu dts config.
Verify:
verified on t962x3-t312 box.
Change-Id: Id8c271e41736e337c12141f879e97bc9673bb99e
Signed-off-by: hualing chen <hualing.chen@amlogic.com>
Hong Guo [Tue, 23 Apr 2019 07:38:33 +0000 (15:38 +0800)]
cpufreq: update dvfs voltage and pwm for g12b revb [1/1]
PD#SWPL-7636
Problem:
update dvfs voltage and pwm for g12b revb
Solution:
update dvfs voltage and pwm for g12b revb
Verify:
update dvfs voltage and pwm for g12b revb
Change-Id: I29deea791126fcb1819be380ed81bc2aa29eeec6
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Evoke Zhang [Fri, 26 Jul 2019 10:39:26 +0000 (18:39 +0800)]
avin_detect: fix avin_detect_flag mistak in probe [1/1]
PD#TV-7797
Problem:
cat detect avin signal
Solution:
fix avin_detect_flag in probe
Verify:
x301
Change-Id: I2ee1f7fa243d31262f4e156e84e63440fe812c09
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
robin zhu [Tue, 25 Jun 2019 20:02:14 +0000 (13:02 -0700)]
dv: support PIP [1/1]
PD#SWPL-9950
Problem:
not support VD1+VD2 PIP for DV+None_DV or 2xNone_DV
need bypass HDR+ to HDR module when Sink support
need always bypass to HDR module for HLG
not fully support convert between format SDR/HDR(+)/HLG
not support convert all format to IPT(DV)
not support follow sink/follow src policy for PIP
Solution:
add full matrix support to convert between SDR/HDR formats
add support to convert all format to IPT(DV)
rewrite policy, video process and tx handing for PIP
Verify:
tested and merged in raven project
need test on for src
need test for sink(has regression, need to fix)
Change-Id: I001d9dcdcb94c95fb2b7651e726d1ebadc8f4551
Signed-off-by: robin zhu <robin.zhu@amlogic.com>
xianjun.liu [Tue, 23 Jul 2019 03:14:19 +0000 (11:14 +0800)]
MTD: slc-nand: fix signed integer overflow in erase_bootloader [1/1]
PD#SWPL-11771
Problem:
Hackers can use signed integer erase_boot_num to cause systems crash
Solution:
replace signed variable with unsigned variables
Verify:
AXG-S400
Change-Id: I9cc8d8f43c199f48e7d7bff2664bca740681d274
Signed-off-by: xianjun.liu <xianjun.liu@amlogic.com>
xianjun.liu [Mon, 22 Jul 2019 10:02:10 +0000 (18:02 +0800)]
MTD: reset some important buf before free the buf [1/1]
PD#SWPL-11772
Problem:
Inadequate clearing of keys/dtbs/env buf in memory
Solution:
clear the corresponding buf before free the buf
Verify:
AXG-S400
Change-Id: I61971c11a41c7062270a3863ae711c856d66f332
Signed-off-by: xianjun.liu <xianjun.liu@amlogic.com>
xianjun.liu [Tue, 25 Jun 2019 07:31:30 +0000 (15:31 +0800)]
Mtd: fix check return value for copy_from_user in uboot_write method [1/1]
PD#SWPL-11776
Problem:
missing return value check for copy_from_user in uboot_write method
Solution:
checking return value after call copy_from_user/copy_to_user
Verify:
AXG-S420
Change-Id: I087a341cbf0b603b2898e81773dc266d8e3debe1
Signed-off-by: xianjun.liu <xianjun.liu@amlogic.com>
jiejing.wang [Wed, 24 Jul 2019 08:21:55 +0000 (16:21 +0800)]
license: add license for audio source file [1/2]
PD#SWPL-11716
Problem:
some audio source has no license
Solution:
add license for audio source file
Verify:
verify by locally
Change-Id: I85e7a27a724f1d255e38f4a878475b38abc1dfd4
Signed-off-by: jiejing.wang <jiejing.wang@amlogic.com>
Evoke Zhang [Tue, 23 Jul 2019 08:11:10 +0000 (16:11 +0800)]
avin_detect: optimize avin detect driver [1/1]
PD#TV-7797
Problem:
avin ch2 affect to ch1 display
Solution:
optimize avin detect driver, add debug print
Verify:
x301
Change-Id: Icc89c5b44f187a30971e8c53c3019297ce72b816
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Hong Guo [Thu, 25 Jul 2019 08:20:45 +0000 (16:20 +0800)]
dvfs: update cpu clk after adjust cpufeq for g12b big core [1/1]
PD#SWPL-11796
Problem:
update cpu clk after adjust cpufeq
Solution:
update cpu clk after adjust cpufeq
Verify:
test pass on g12b_w400
Change-Id: I5e4593e4b65de5f7536ddde793d682cc67df0e64
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Jian Hu [Thu, 25 Jul 2019 03:54:02 +0000 (11:54 +0800)]
clk: g12a/b: add aclk_lock init [1/1]
PD#SWPL-11765
Problem:
open CONFIG_LOCK_STAT
BUG: spinlock bad magic on CPU#2, swapper/0/1
lock: aclk_lock+0x0/0x28, .magic:
00000000, .owner: swapper/0/1, .owner_cpu: 2
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.9.113 #1
Hardware name: Generic DT based system
[
bc001a5c+ 16][<
c020e5f4>] show_stack+0x20/0x24
[
bc001a84+ 40][<
c06161e8>] dump_stack+0xb8/0xf4
[
bc001aac+ 40][<
c02a1428>] spin_dump+0xa0/0xf0
[
bc001acc+ 32][<
c02a1744>] do_raw_spin_unlock+0xb8/0x138
[
bc001ae4+ 24][<
c0fa35f4>] _raw_spin_unlock_irqrestore+0x34/0x9c
[
bc001b2c+ 72][<
c0690ce4>] clk_mux_set_parent+0xc0/0x148
[
bc001b3c+ 16][<
c06911d8>] clk_composite_set_parent+0x3c/0x40
[
bc001b6c+ 48][<
c068cccc>] clk_core_set_parent+0x18c/0x42c
[
bc001b7c+ 16][<
c068cf98>] clk_set_parent+0x2c/0x30
[
bc001bb4+ 56][<
c0ca7ad8>] aml_tdm_platform_probe+0x27c/0x748
[
bc001bd4+ 32][<
c06d69e0>] platform_drv_probe+0x60/0xc0
[
bc001bfc+ 40][<
c06d4734>] driver_probe_device+0x214/0x2c0
Solution:
add aclk_lock init
Verify:
test passed on g12b
Change-Id: I1214d044c279865065de237bfb1ecc7f9ea71699
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
renjiang.han [Thu, 4 Jul 2019 07:34:36 +0000 (15:34 +0800)]
ppmgr: Unbound kstrdup and Potential Null Dereference. [1/1]
PD#OTT-4872
Problem:
Unbound kstrdup and Potential Null Dereference.
Solution:
Add a judgment on the return value and the null pointer.
Verify:
on u212
Change-Id: I1e493c8125e08d4a6fb9fb46f28309eba6f0e47b
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
Pengcheng Chen [Tue, 23 Jul 2019 02:24:04 +0000 (10:24 +0800)]
dv: fix Buffer overflow in amdolby_vision due to string processing [1/1]
PD#OTT-5058
Problem:
Buffer overflow in amdolby_vision due to string processing
Solution:
add buffer limited when string buffer accepting commands (namely *parm);
Verify:
verified on Raven
Change-Id: Icd550f331efb2ee46e2f270e516df9942837f93d
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Jihong Sui [Wed, 24 Jul 2019 09:12:27 +0000 (17:12 +0800)]
deinterlace: add condition for force_prog [1/1]
PD#SWPL-11550
Problem:
force_prog only for progressive.
Solution:
add condition for force_prog
Verify:
TL1
Change-Id: I44e165c779eefcefcc18a286e66a598ffef1294f
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Chia-hung Duan [Wed, 3 Jul 2019 06:40:41 +0000 (14:40 +0800)]
build: fix uninitialized-use when build with prebuilt toolchain [1/1]
PD#SWPL-8241
Problem:
** SYNC FROM GOOGLE **
Build failed due to uninitialzed variable
Solution:
Init to reasonable value
Verify:
Build with Android prebuilt toolchain
Change-Id: I09615276b48b6253f8084743a7d50081cfc24ec4
Signed-off-by: Shuide Chen <shuide.chen@amlogic.com>
Shuai Li [Mon, 22 Jul 2019 06:13:48 +0000 (14:13 +0800)]
audio: Fix panic on add_timer [1/1]
PD#TV-7920
Problem:
Audio drive caused kernel panic.
BUG_ON timer_pending.
Solution:
Add timer will panic calling add_timer.
If timer is pending we need use mod_timer
to deal with this case.
Verify:
T962
Change-Id: Ib4143de384af40803609c3513ad07eeb3fe59bbf
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
renjiang.han [Wed, 24 Jul 2019 11:56:12 +0000 (19:56 +0800)]
amlvideo2: screenshot buffer leak. [1/1]
PD#TV-7948
Problem:
Amlvideo2 will not put the last buffer of vdin back.
Solution:
Return temp vf to vdin in amlvideo2.
Verify:
on X301
Change-Id: I6f7f604a8a0fa8f577d50e242968e0aa52450cda
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
Evoke Zhang [Fri, 28 Jun 2019 10:16:12 +0000 (18:16 +0800)]
tvafe: vbi: optimize vbi data parse [1/1]
PD#SWPL-10532
Problem:
teletext sometimes display abnormal
Solution:
optimize vbi data parse
Verify:
x301
Change-Id: I879208fd05dd188dc84fde7dd32a1c64504c57f8
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Bichao Zheng [Thu, 18 Jul 2019 06:42:25 +0000 (14:42 +0800)]
irblaster: add irblaster support for tm2 t312 [1/1]
PD#SWPL-9909
Problem:
Need add irblaster support for tm2 T312.
Solution:
1. Enable irblaster controller.
2. Mux GPIOAO_4 to IR_REMOTE_OUT.
Verify:
verified on tm2 t96e2
Change-Id: If40c84c0dff0c1d771cd6bccc1c3ac5af8e728fd
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
qi duan [Tue, 9 Jul 2019 12:27:45 +0000 (08:27 -0400)]
ethernet: g12a/b exphy use autocali [1/1]
PD#SWPL-10391
Problem:
g12b revA and revB need one code for two parameter
Solution:
if autocali in uboot, use autocali result
if no autocali,use the dts para
Verify:
verify on g12b w400 board,revA and revB
Change-Id: I4b48c67fba25eba4cb286470557ff0777009ec9f
Signed-off-by: qi duan <qi.duan@amlogic.com>
Evoke Zhang [Sun, 5 May 2019 09:39:01 +0000 (05:39 -0400)]
vpu: fix mem_pd reg4 mistake for local dimming [1/1]
PD#SWPL-6798
Problem:
vpu mem_pd reg4 config is incorrect
Solution:
fix mem_pd reg4 config
Verify:
ab301
Change-Id: Ibeb732051c2ad4b46e55f66fe05fce440b450263
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Xiaoming Sui [Fri, 14 Jun 2019 09:59:54 +0000 (17:59 +0800)]
avsync: video: fix avsync issue when hdmiin [2/3]
PD#TV-6148
Problem:
the avsync test is failed when hdmiin.
Solution:
add the delay check and setting when avsync is lost.
Verify:
X301
Change-Id: I53c1a7f0ddb907afa83fbf65b280d1d1cb35a804
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
Bencheng Jing [Fri, 12 Jul 2019 13:17:09 +0000 (21:17 +0800)]
amvecm: fix dnlp_cuvbld_min and dnlp_cuvbld_max not load [1/1]
PD#SWPL-11528
Problem:
dnlp_cuvbld_min and dnlp_cuvbld_max not follow db
Solution:
add refresh in driver
Verify:
TL1
Change-Id: Id3a79c5b834c8e6fd3574c70efdf0982694b306c
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
libo [Wed, 8 May 2019 09:51:51 +0000 (17:51 +0800)]
wifi: pull-down uart_cts_a pin for realtek bt [4/4]
PD#SWPL-7373
Problem:
realtek bt not work
Solution:
pull-down uart_cts_a pin
Verify:
ampere
Change-Id: I14f57d28d081077d89c681e2ecc95a25f706c64c
Signed-off-by: libo <bo.li@amlogic.com>
Ruixuan Li [Tue, 23 Jul 2019 03:06:30 +0000 (11:06 +0800)]
emmc: run hs400 166M busmode on sm1 [1/1]
PD#SWPL-10719
Problem:
right now the sm1 is run hs200 200M
Solution:
modify dts
Verify:
passed on sm1_ac200
Change-Id: I01c36c04293698b36cec116302cb104b22500d99
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Pengcheng Chen [Fri, 12 Jul 2019 10:45:24 +0000 (18:45 +0800)]
rdma: add rdma multi reg trace function [1/1]
PD#SWPL-11388
Problem:
rdma not support multi reg trace
Solution:
add rdma multi reg trace function
Verify:
verify by g12b w400
Change-Id: I74496e11f85af5f2e9aa99108dfc5842eb98d9fc
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
nengwen.chen [Tue, 7 May 2019 06:41:16 +0000 (14:41 +0800)]
atv_demod: fix the CVBS output level [1/1]
PD#SWPL-11581, PD#TV-5622, PD#TV-8087, PD#TV-8088, PD#TV-8089
Problem:
fix the CVBS output level.
Solution:
1.fix peak level(1Vp-p).
2.fix sync head level(300+/-10%mv).
3.fix white level(700+/-10%mv).
Verify:
Verified by x301.
Change-Id: Ie4bd6ed0bb4d6db4443acae49ef98f1f4398d973
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
shuanglong.wang [Fri, 19 Jul 2019 02:48:07 +0000 (10:48 +0800)]
tsync: tunnel mode do not set first vpts for stream mode [1/2]
PD#SWPL-11210
Problem:
stream mode set vpts in check in pts
Solution:
tunnel mode do not set first vpts for stream mode
Verify:
verify by u212
Change-Id: Ic369b83411051a819eb65ad5d1585e26e0342f3f
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Ruixuan Li [Tue, 9 Jul 2019 08:51:49 +0000 (16:51 +0800)]
emmc: run hs400 166M busmod on sm1 [1/1]
PD#SWPL-10719
Problem:
hs400 200M not stable on sm1
Solution:
run hs400 166M busmod
Verify:
passed on sm1_ac200
Change-Id: I5e5f4db821e8360fdd3ccd6ce24df83446073cf2
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
yicheng shen [Mon, 15 Jul 2019 06:53:07 +0000 (02:53 -0400)]
hdmitx: update the phy setting for TM2 [2/2]
PD#SWPL-10703
Problem:
HDMITX Eye Diagram of TM2 test fail
Solution:
Optimize the phy setting;
Verify:
TM2
Change-Id: Ib9f948aa85fe189754d7da002727309e7e32ca18
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Jianxin Pan [Mon, 22 Jul 2019 02:45:31 +0000 (19:45 -0700)]
Merge "clk: g12b: fix cpu hangup when reboot [1/1]" into amlogic-4.9-dev
Ruixuan Li [Wed, 12 Jun 2019 08:49:22 +0000 (16:49 +0800)]
emmc: rescan cmd delay windows to set cmd delay [1/1]
PD#SWPL-10095
Problem:
command delay may too close to the command edge
Solution:
rescan cmd delay windows and find cmd delay value
after data alignment
Verify:
passed on g12b
Change-Id: I258e93aa87e35c843c45f62c58af3609bebe0901
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
MingLiang Dong [Wed, 10 Jul 2019 13:29:37 +0000 (09:29 -0400)]
hdr: add hdmi hdr10+ support [1/1]
PD#SWPL-9850
Problem:
new feature, add hdmi hdr10+ support
Solution:
add hdmi hdr10+ support
Verify:
verify on TL1
Change-Id: I189d92d48dcce81ac8c9476d0c6f7b64a461a9e6
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Jian Hu [Sun, 21 Jul 2019 04:57:38 +0000 (12:57 +0800)]
clk: g12b: fix cpu hangup when reboot [1/1]
PD#SWPL-11559
Problem:
it will hangup when reboot
Solution:
fix cpub clock parent name error
Verify:
test passed on g12b
Change-Id: I7c2732420d6040d8cb778c104f71f4397a1bb03a
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
shaochan.liu [Wed, 22 May 2019 07:41:15 +0000 (15:41 +0800)]
sm1: add slt panel config support [1/1]
PD#SWPL-8442
Problem:
need slt panel config(mipi2hdmi 720p) on basic board
Solution:
add slt panel config(mipi2hdmi 720p) on basic board
Verify:
sm1
Change-Id: Ia634216a5f0bc96f9a4838a2f0ec983bef8d0a3b
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Yong Qin [Mon, 1 Jul 2019 09:19:26 +0000 (17:19 +0800)]
vdin: add hdr10 pluse data in vframe [1/1]
PD#SWPL-9849
Problem:
add hdr10 pkt data into vframe structure
Solution:
according to hdmi rx hdr10p_on flag, copy hdr10p data
from hdmirx to vframe
Verify:
tl1
Change-Id: I4d3bcbcce4d1303a5e5d4cf57a7777e4fd1fd54c
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
changqing.gao [Thu, 18 Jul 2019 06:17:21 +0000 (14:17 +0800)]
dts: sm1: reduce the CMA reserved memory [1/1]
PD#SWPL-11208
Problem:
system would auto reboot because of low free memory(Unmovable type)
Solution:
reduce the CMA reserved memory.
1.reduce ion_cma_reserved from 128MB to 48MB.(DDR size == 1G)
2.remove vdin0_cma_reserved which is not used for sm1.
Verify:
test passed on sm1
Change-Id: Ifdb31bd3451ad984305c5f08ba3b1be478c02cf4
Signed-off-by: changqing.gao <changqing.gao@amlogic.com>
Lei Yang [Fri, 14 Jun 2019 09:32:27 +0000 (17:32 +0800)]
hdmirx: add packet analysis of hdr10plus [1/1]
PD#SWPL-9686
Problem:
hdmirx cannot support HDR10plus
Solution:
add packet analysis of hdr10plus.
Verify:
tm2_ab311.
Change-Id: Ic98c3fa57ce6da3262285febc587fb2cac2be0fa
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
Bencheng Jing [Wed, 17 Jul 2019 08:29:26 +0000 (16:29 +0800)]
mcdi: keep g12a/g12b/sm1 reg_mcdi_qmeen same as gxlx2 [1/2]
PD#SWPL-10411
Problem:
reg_mcdi_qmeen is enable by driver
Solution:
disable reg_mcdi_qmeen
Verify:
u212
Change-Id: I02887fab37a0bbeb43bfa83a4a5a2e446bebb9c1
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Pengcheng Chen [Thu, 18 Jul 2019 12:09:31 +0000 (20:09 +0800)]
vpp: fix afbc scope set when video reverse [1/1]
PD#SWPL-9397
Problem:
afbc scope set error when video reverse and afbc width not aligned
Solution:
fix afbc scope set when video reverse
Verify:
Verify on TL1-x301
Change-Id: I1631c18192f438bfb6e60c3970789a903d0a3d19
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Yong Qin [Thu, 11 Jul 2019 10:51:44 +0000 (18:51 +0800)]
cec: during resume received OTP msg again [1/1]
PD#TV-7837
Problem:
when tv power on by OTP, when during power on, tv received
OTP again, then needn't send power key. and need send a event
to android.
Solution:
when cec driver is power on, needn't send power event to android.
Verify:
tl1
Change-Id: I8807c5cbbcab831577fdc23062a78454c2106167
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Dezhi Kong [Mon, 17 Jun 2019 11:39:59 +0000 (19:39 +0800)]
drm: add sm1 support [1/1]
PD#SWPL-8061
Problem:
SM1 support
Solution:
add sm1 support
Verify:
verify by ac200 with modetest command
Change-Id: Id79f227afa7f7dbcaad09887f8bdbd1f64b93c4a
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Pengcheng Chen [Wed, 10 Jul 2019 09:25:10 +0000 (17:25 +0800)]
osd: fixed fb mmap failed on android [3/3]
PD#SWPL-6631
Problem:
dolby vision graphic tests need fb_test
Solution:
Alloc buffer when mmap
Verify:
verified on tm2 t96e2
Change-Id: I12896d7ef9ad4a8122e2784c4692ff2d0bc69d1b
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Yong Qin [Mon, 8 Jul 2019 07:42:57 +0000 (15:42 +0800)]
vdin: for support dv ll mode [1/1]
PD#SWPL-2894
Problem:
vdin for support DV LL mode
Solution:
1.add dv 1.5 LL mode support
2.fix vdin mem dump method,only dump active zone
3.add support RGB and 12bit for dv LL mode
4.add vsi info param of dv LL mode
5.dolby vision LL 422 12bit mode,RX need to enable tunnel
Verify:
tl1
Change-Id: I4ddad1310bcc6d2f777bf7099ac26fe2db812b22
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Yong Qin [Fri, 12 Jul 2019 06:12:06 +0000 (14:12 +0800)]
cec: none tv chip set arc cause crash [1/1]
PD#OTT-5149
Problem:
ceca isr cost long time, and delayed vdin vs.
Solution:
move function to tasklet
Verify:
test on txlx customer platform.
Change-Id: Iaae5b682f858787b25527518d2f787c3ee73e1be
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Sandy Luo [Mon, 15 Jul 2019 05:44:39 +0000 (13:44 +0800)]
TL1: dts: change dvfs table [1/1]
PD#SWPL-10848
Problem:
ARM vfp d8 error.
Solution:
Add DFVS voltage
Verify:
TL1 X301
Change-Id: I780daaa5326c99c80e246ce1a1797fb5ed13a518
Signed-off-by: Sandy Luo <sandy.luo@amlogic.com>
Hong Guo [Fri, 12 Jul 2019 09:21:07 +0000 (17:21 +0800)]
supsend: clear wakeup reason after reusme. [1/1]
PD#SWPL-11035
Problem:
clear wakeup reason after reusme.
Solution:
clear wakeup reason after reusme.
Verify:
test pass on t962x2-x301 ,g12b_400
Change-Id: I19360dbf1c7a1cf9460417b00c8af6ebc818beba
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
yao liu [Fri, 12 Jul 2019 09:33:50 +0000 (05:33 -0400)]
osd: add osd blend bypass function for tm2 [2/3]
PD#SWPL-6631
Problem:
dv certification need osd blend bypass
Solution:
add osd blend bypass function
Verify:
verified on tm2 t96e2
Change-Id: I91ba9c622aacc7bc9ad657105fd5e53a3cee595b
Signed-off-by: yao liu <yao.liu@amlogic.com>
yao liu [Fri, 12 Jul 2019 09:27:54 +0000 (05:27 -0400)]
dolby: fix tm2 end-to-end test [1/3]
PD#SWPL-6631
Problem:
5213/5214/5217 480p graphic tests fail
due to g_vpotch is too small
Solution:
incread g_vpotch from 0x20 to 0x60 for resolution below 720p
Verify:
verified on tm2 t96e2
Change-Id: Iedeaaf485c9ffea703d344edd7ed4b5187e78f1f
Signed-off-by: yao liu <yao.liu@amlogic.com>
Jihong Sui [Mon, 15 Jul 2019 05:50:45 +0000 (13:50 +0800)]
deinterlace: increasing protection for unreg [1/2]
PD#SWPL-10149
Problem:
random crash when stress test
Solution:
1. delete recycle keep buff when bypass;
2. adjusting judgment timing about pre_de_buf_config;
Verify:
TL1
Change-Id: I7b0716ce35234d2342cdc13fcf0d51211f579d13
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jian Hu [Fri, 12 Jul 2019 09:10:45 +0000 (17:10 +0800)]
clk: sm1: fix cpu clock hangup [1/1]
PD#SWPL-10033
Problem:
it will hangup when play video
Solution:
using the origin clk-mux ops to register cpu clock
Verify:
test passed on sm1
Change-Id: I1a21eb28d8af3d68a70c89c37fff857fb416c9a8
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
sky zhou [Fri, 5 Jul 2019 08:37:36 +0000 (16:37 +0800)]
vdin: remove hardcode manual buffer cnt. [1/3]
PD#TV-7344
Problem:
current vdin1 use hardcode buffer cnt 4, it
is not good for user space program.
Solution:
Check passed buffer fd arry, so we can read variable
fd num.
Verify:
verified on macroni
Change-Id: I9bc07e45a3716423dc037a5d966c9b6b5eafcdfe
Signed-off-by: sky zhou <sky.zhou@amlogic.com>
sky zhou [Tue, 16 Jul 2019 10:05:16 +0000 (18:05 +0800)]
osd: osd ext leaked buf when viu2 displaymode is NULL. [1/1]
PD#TV-7713
Problem:
osd buffer leaked dma buffer when switch
display pipe.
Solution:
when viu is NULL, osd need still release correct
display file.
Verify:
verified on macroni
Change-Id: Ib2df6b022b6fd654430eedae08e351ae53701fc1
Signed-off-by: sky zhou <sky.zhou@amlogic.com>
Gongwei Chen [Mon, 15 Jul 2019 07:35:54 +0000 (15:35 +0800)]
dts: gpio keypad in u202 [1/2]
PD#SWPL-11212
Problem:
The physical keys are not working
Solution:
add gpio keypad in u202
Verify:
Verify by Android P u202
Change-Id: I0c97d2ffd7f8712b4584c81b1b9007f45755ec7c
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
Huan Biao [Thu, 11 Jul 2019 03:33:53 +0000 (11:33 +0800)]
dts: thermal: fix gpu pp get fail issue [1/1]
PD#SWPL-11138
Problem:
gpufreq cooling device init get gpu pp fail
Solution:
get gpu pp from gpu dts
Verify:
verified on s905x p212
Change-Id: I0dfa8f6ff2a767432177301b32acdceb0f5e3462
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
Tao Zeng [Mon, 15 Jul 2019 05:53:42 +0000 (13:53 +0800)]
kasan: close vmap if enabled kasan [1/1]
PD#SWPL-10141
Problem:
if opened kasan with vmap, there will be some wrong kasan reports
Solution:
close vmap if open kasan
Verify:
p212
Change-Id: I37cdcb26cfb6fe87529db1ece3b7740ac072ba1a
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Huan Biao [Fri, 12 Jul 2019 09:27:01 +0000 (17:27 +0800)]
thermal: add s912 thermal support [1/2]
PD#SWPL-11152
Problem:
s912 thermal init fail
Solution:
fix thermal dts
fix thermal cpuid get issue
Verify:
verified on s912 q201
Change-Id: Id2802621c5c8d711bfcbc5684252ac0dd519900a
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
zhiwei.yuan [Wed, 10 Jul 2019 08:31:15 +0000 (16:31 +0800)]
vdin: switch to ATV source,snowflake screen showing pink [1/1]
PD#SWPL-11340
Problem:
matrix setting is wrong
Solution:
for snowflake brightness, only need coef0, disable coef1 & 2
Verify:
verified by t962x2_x301
Change-Id: Id248803541fbb68004ea61bd2aa7dfc57408e787
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Qianggui Song [Thu, 27 Jun 2019 10:46:29 +0000 (18:46 +0800)]
ir: fix allocation of memory without size check issue [1/1]
PD#SWPL-11248
Problem:
When handling the set attribute IOCTL REMOTE_IOC_SET_KEY_NUMBER, the driver
does not limit the size of allocation with kzalloc.
Solution:
Limit the size of alllcation range, if given a value out of range, set
update flag to false and do nothing in kzalloc stage.
Verify:
W400
Change-Id: I6a4150f5615557c372738c918aad86120d149340
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Yue Wang [Tue, 16 Jul 2019 07:41:04 +0000 (15:41 +0800)]
usb: dma-mapping: prevent writeback deadlock in CMA allocator [1/1]
PD#SWPL-11362
Problem:
A deadlock happens when a task initiates a CMA allocation that triggers
a page migration *AND* the tasks holding the subsequent pages have to
writeback their pages using CMA allocations.
In such a situation, the task that has triggered the page migration
holds a mutex that prevents other tasks from migrating their pages using
that same CMA allocator. This leads to a deadlock.
Solution:
The CMA is incapable of honoring the NOIO flags in some scenario, thus
cannot be used for writeback. The fix allows the code that chooses which
allocator to use in the ARM platform to avoid the CMA case for that
scenario.
The ARM DMA layer checks for allow blocking flag (_GFP_BDEV) to decide
whether to go for CMA or not. That test is not sufficient to cover the
case of writeback (GFP_NOIO).
The fix consists in adding a gfp_allow_writeback helper that tests for
the __GFP_IO flag. Then, the DMA layer uses it to decide not to go for
CMA in case of writeback.
Verify:
TL1
Change-Id: I175eb94de588234d3de2dc7f65dafe980e2636af
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
nengwen.chen [Wed, 3 Jul 2019 11:48:52 +0000 (19:48 +0800)]
atv_demod: after afc adjusts freq and stable, sync to settings to get freq [1/1]
PD#TV-7462
Problem:
after afc adjusts freq and stable, sync to settings to get freq.
Solution:
1.after afc adjusts freq and stable, sync to settings to get freq.
Verify:
Verified by x301
Change-Id: Id78a7f974345fd428f9bb185c36fcbe7b93f4ac2
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
yao liu [Fri, 28 Jun 2019 02:07:23 +0000 (10:07 +0800)]
dolby: fix 5008 crc error [1/1]
PD#SWPL-10487
Problem:
1.tb39 new case 5008, dm version is 3,
core3 raw_metadata overflow
2.core3 raw_metadata 207 overwrite core3 clkgate_ctrl
and core3 swap_ctrl0 andsawp_ctrl1 reg.
Solution:
1.Increase raw_metadata size to 512
2.Force dv_mode to DOLBY_VISION_OUTPUT_MODE_IPT, output
ipt444 12bit for 5008.
3.Dont set core3 metadata reg when scramble disabled or
metedata size > 204
Verify:
verified on sm1
Change-Id: I459736eb42eb14fe3fe0dc054eb6693c88967741
Signed-off-by: yao liu <yao.liu@amlogic.com>
zhiwei.yuan [Mon, 15 Jul 2019 05:54:19 +0000 (13:54 +0800)]
vdin: subtitle is disappear after hot_plug signal cable [1/1]
PD#SWPL-11151
Problem:
signal format is null when start dec
Solution:
do not change signal format when signal is unstable
Verify:
verified by t962x2_x301
Change-Id: I14a9247e83c15aecac1939f3270f46642a6d3a22
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Xiaoming Sui [Sat, 29 Jun 2019 11:17:27 +0000 (19:17 +0800)]
avsync: tsync: fix the avsync issue [1/3]
PD#SWPL-8590
Problem:
inprove avsync accuracy when play
Solution:
1: calc the pts and pcr diff from the stream;
2: do the hold or drop audio data;
3: reclac the timestamp when paly;
Verify:
X301
Change-Id: I176bb2e19c1c538cfb9a8203d1303ee700a4927c
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
Evoke Zhang [Mon, 17 Jun 2019 06:49:44 +0000 (14:49 +0800)]
tvafe: fix identify as PAL-DK when the input signal is SCAM DK [1/1]
PD#TV-7779
Problem:
identify as PAL-DK when the input signal is SECAM DK
Solution:
increase atv try_fmt max cnt to recognize SECAM
Verify:
x301
Change-Id: I306f2337b6b2c3d0b4ec2fc85e45f9f5993b754b
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Yong Qin [Mon, 8 Jul 2019 06:19:04 +0000 (14:19 +0800)]
vlock: when quite vlock, restore pre pll value [1/1]
PD#TV-6743
Problem:
exit hdmi source, display many horizontal fine lines.
restore m/f value is wrong.
Solution:
when exit vlock, need restore m/f value from backup.
Verify:
T950X
Change-Id: If0d1b3758a19547675aa4bef920168c20ca83939
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Tao Zeng [Mon, 8 Jul 2019 02:36:26 +0000 (10:36 +0800)]
sched: change sleep api for __migration_entry_wait [1/1]
PD#TV-7519
Problem:
schedule_timeout did not really make task sleep. It will cause
rt thread bug when this thread is waiting for a cma page migrated:
sched: RT throttling activated for rt_rq
eaf671b8 (cpu 1)
potential CPU hogs:
btu message loo (4253)
[<
c037d5b8>] task_tick_rt+0x0/0x120
[<
c037d914>] pick_next_task_rt+0x1cc/0x1e4
[<
c0fa8534>] __schedule+0x598/0x91c
[<
c0fa891c>] schedule+0x64/0xc4
[<
c0fac134>] schedule_timeout+0x1dc/0x47c
[<
c0493ba4>] __migration_entry_wait+0x168/0x194
~~~~~blocked here
[<
c0493c20>] migration_entry_wait+0x50/0x54
[<
c0473008>] do_swap_page+0x404/0x4e8
[<
c047357c>] handle_mm_fault+0x1ec/0xa60
[<
c031a2f0>] do_page_fault+0x2d4/0x3a8
[<
c0301408>] do_PrefetchAbort+0x48/0xb0
[<
c030f78c>] ret_from_exception+0x0/0x34
Solution:
using usleep_range instead of schedule_timeout
Verify:
t905x
Change-Id: I908022b747ad921b5863af377291abdf06672f15
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Jihong Sui [Thu, 11 Jul 2019 02:31:26 +0000 (10:31 +0800)]
deinterlace: process prog 420 as 422 [1/1]
PD#SWPL-11051
Problem:
Abnormal display of red subtitles
Solution:
process prog 420 as 422
Verify:
tl1
Change-Id: I46e0af178d6d87fc3a815f70c5a84d0f80772b6c
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Pengcheng Chen [Wed, 10 Jul 2019 11:56:23 +0000 (19:56 +0800)]
dv: switch dv core3 after wm, osd_hdr and vd2_hdr [1/1]
PD#SWPL-11113
Problem:
need verify dv core3 can set after wm, osd_hdr and vd2_hdr
Solution:
switch dv core3 after wm, osd_hdr and vd2_hdr
Verify:
verified on T962e2_ab311
Change-Id: Iac5d6d113c9dc5d76dff3ef5911263a1c9dca159
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
zhiwei.yuan [Thu, 11 Jul 2019 09:12:02 +0000 (17:12 +0800)]
vdin: tm2,the picture is greenish when do hdmi cts [1/1]
PD#SWPL-9762
Problem:
HDR2 matrix setting is incorrect
Solution:
disable hdr2 matrix when no need do conversion
Verify:
verified by t962x3_ab301
Change-Id: I2ca1fbd2ccea5fa76e7109ecdca4141dccffebc2
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Nan Li [Thu, 11 Jul 2019 07:33:56 +0000 (15:33 +0800)]
sdio: optimize sdio clk cfg [2/2]
PD#SWPL-9640
Problem:
sdio auto_clk close fail.
Solution:
optimize sdio auto_clk cfg,
add sdio_clk_always_on(int on).
Verify:
G12A_u211
Change-Id: Id760b41a948c6b7e15f675376084b0cdd4edc151
Signed-off-by: Nan Li <nan.li@amlogic.com>
Hang Cheng [Mon, 8 Jul 2019 06:26:39 +0000 (14:26 +0800)]
hdmirx: add version parse of current edid [1/1]
PD#SWPL-10930
Problem:
1.hdmirx driver does't know currently used edid version
2.SCDC only used for HDMI2.0 mode
Solution:
1.add version parse of current edid
2.Disable SCDC for HDMI1.4 mode
Verify:
TL1-x301
Change-Id: I00f05fee1d1d61847983ee390556644b03b456a3
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
Zongdong Jiao [Thu, 11 Jul 2019 06:30:38 +0000 (14:30 +0800)]
hdmitx: remove unnecessary rxsense check [1/1]
PD#IPTV-3767
Problem:
When plugin, this check may block EDID reading
Solution:
Remove unnecessary rxsense check
Verify:
G12/P261
Change-Id: Ida42bc6b9b17e6e9d0d177e48ce3cf33949fdf5d
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Dezhi Kong [Tue, 11 Jun 2019 12:29:40 +0000 (20:29 +0800)]
drm: add multi-layer support [1/1]
PD#SWPL-9646
Problem:
unsupport multi-layer
Solution:
add multi-layer support
Verify:
verify by w400 with modetest command
Change-Id: I5cd50761d2ab9cfff0f80d38e20455044c7a33fd
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Cheng Wang [Thu, 6 Jun 2019 07:37:15 +0000 (15:37 +0800)]
amvecm: new feature, add HDR10+ to sdr function [1/1]
PD#SWPL-788
Problem:
new feature, add hdr10+ to sdr function
Solution:
new feature, add hdr10+ to sdr function
Verify:
on x301
Change-Id: Id2bc14db0be8915ba98588c7e1a7b940421e6aa2
Signed-off-by: Cheng Wang <cheng.wang@amlogic.com>
Pengcheng Chen [Tue, 9 Jul 2019 02:28:10 +0000 (10:28 +0800)]
vpp: update vpp out size when vinfo changed [1/1]
PD#TV-7616
Problem:
vpp out size not updated when vinfo changed
Solution:
update vpp out size when vinfo changed
Verify:
verified on T962x2
Change-Id: I48e39f8cf855ed31add0b9ea93a96fa63325899a
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Pengcheng Chen [Tue, 7 May 2019 07:19:02 +0000 (15:19 +0800)]
viu2: set viu2 matrix for vinfo viu_format [1/1]
PD#SWPL-8255
Problem:
viu2 display color abnormal
Solution:
set viu2 matrix for vinfo viu_format
Verify:
w400
Change-Id: Ifbe5b85416fe31b60b1bde7cad80a4bcfd036721
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Pengcheng Chen [Mon, 8 Jul 2019 07:43:14 +0000 (15:43 +0800)]
osd: add viu2 support for sm1 and tm2 [1/1]
PD#SWPL-10934
Problem:
viu2 not support for sm1
Solution:
add viu2 support for sm1 and tm2
Verify:
verified on sm1
Change-Id: I3988a84b64b952a76b1b262227e11682f28c7cdd
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Pengcheng Chen [Mon, 8 Jul 2019 05:25:00 +0000 (13:25 +0800)]
dv: switch vd1/vd2 before dolby core1/2 and after dolbycore1/2 [1/1]
PD#SWPL-6627
Problem:
verify vd1/vd2 can switch before dolby core1/2 and after dolbycore1/2
Solution:
add core1_switch to switch vd1/vd2 before dolby core1/2 and after
dolbycore1/2
Verify:
verified on t962e2 AB311
Change-Id: I3348b906357c93d0c7a40066880bc2f029badb77
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Pengcheng Chen [Thu, 4 Jul 2019 07:53:01 +0000 (15:53 +0800)]
dv: add copy dv core1a to dv core1b func [1/1]
PD#SWPL-6630
Problem:
need verify dv core1b(vd2) connect with dolby core3
Solution:
1. use videopip_loop
2. copy dv core1a to dv core1b
Verify:
verified on t962e2 AB311
Change-Id: Ib137c6b420fa71aa0756bf9558fdbe66ef0c6e94
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
zhiwei.yuan [Fri, 5 Jul 2019 07:51:43 +0000 (15:51 +0800)]
tvafe: T962E2 Low probability of crashing at startup [1/1]
PD#SWPL-9276
Problem:
mem allocate fail sometimes by using dma_alloc_coherent
Solution:
use kzalloc instead
Verify:
verified by t962x3_ab301
Change-Id: Iec58746b7e269d307f88037216b7a778d18774ec
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Ville Syrjälä [Wed, 12 Jul 2017 15:51:02 +0000 (18:51 +0300)]
drm/atomic: Make private objs proper objects
Make the atomic private object stuff less special by introducing proper
base classes for the object and its state. Drivers can embed these in
their own appropriate objects, after which these things will work
exactly like the plane/crtc/connector states during atomic operations.
v2: Reorder to not depend on drm_dynarray (Daniel)
Change-Id: I475f3c46440934b8d6f461935b6413624b7d34c7
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v1
Signed-off-by: Ville Syrj?l? <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170712155102.26276-3-ville.syrjala@linux.intel.com
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
Pandiyan, Dhinakaran [Fri, 21 Apr 2017 05:51:30 +0000 (22:51 -0700)]
drm: Add driver-private objects to atomic state
It is necessary to track states for objects other than connector, crtc
and plane for atomic modesets. But adding objects like DP MST link
bandwidth to drm_atomic_state would mean that a non-core object will be
modified by the core helper functions for swapping and clearing
it's state. So, lets add void * objects and helper functions that operate
on void * types to keep these objects and states private to the core.
Drivers can then implement specific functions to swap and clear states.
The other advantage having just void * for these objects in
drm_atomic_state is that objects of different types can be managed in the
same state array.
v7: Use __for_each_private_obj to define for_each_private_obj (Maarten)
v6: More kernel-doc to keep 0-day happy
v5: Remove more NULL checks (Maarten)
v4: Avoid redundant NULL checks when private_objs array is empty (Maarten)
v3: Macro alignment (Chris)
v2: Added docs and new iterator to filter private objects (Daniel)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Harry Wentland <Harry.wentland@amd.com>
Change-Id: I1d906ca120167b8b25a5e959b332c5bea55a97b7
Acked-by: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1492753893-3748-2-git-send-email-dhinakaran.pandiyan@intel.com
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
Cheng Tong [Tue, 9 Jul 2019 09:08:12 +0000 (17:08 +0800)]
dts: T312 add config for dtv tuner si2169 [1/2]
PD#SWPL-10672
Problem:
Add config for dtv tuner si2169
Solution:
Add dtv tuner si2169 as default
and add tuner i2c config
Verify:
Verified by T312
Change-Id: Ib64871f37e03f84beb8d8174e9e5b5ec0f722115
Signed-off-by: Cheng Tong <cheng.tong@amlogic.com>
nengwen.chen [Wed, 3 Jul 2019 04:13:19 +0000 (12:13 +0800)]
atv_demod: add nicam detection when current signal fm-mono change to nicam [1/1]
PD#TV-7335
Problem:
add nicam detection when current signal fm-mono change to nicam.
Solution:
1.add nicam detection when current signal fm-mono change to nicam.
Verify:
Verified by x301
Change-Id: If2e35d018d2df803c5458cc93974352b06e90a11
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Zhuo Wang [Fri, 5 Jul 2019 09:05:20 +0000 (17:05 +0800)]
ethernet: enhance window function [1/1]
PD#SWPL-10876
Problem:
add del 2ns function
Solution:
add del 2ns function
Verify:
verify on u200 board
Change-Id: I949a1d85e41d0b0e03708243f9559f8de63b0e54
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
Zhe Wang [Wed, 3 Jul 2019 11:27:54 +0000 (19:27 +0800)]
audio: add clip thd control interface [1/3]
PD#SWPL-10716
Problem:
when audio signal change from -30dB to 0dB, audio suddenly output power
is higher than 150% instantaneous maximum power
Solution:
add clip thd control interface
Verify:
verified on TL1-X301
Change-Id: Id16ba3c220a22b473eaa1e3ff87bf5dde2a83227
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Huan Biao [Fri, 5 Jul 2019 05:43:23 +0000 (13:43 +0800)]
thermal: update read sensor times for performance [1/1]
PD#SWPL-10836
Problem:
read sensor time too long
Solution:
read sensor once
Verify:
verified on t1 t962x2 x301
Change-Id: Iddf4c903ba8a3836666943adb5c02c5d287728df
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
Pengcheng Chen [Thu, 4 Jul 2019 10:35:47 +0000 (18:35 +0800)]
osd: add wait_hw_vsync_viu2 [1/1]
PD#TV-7584
Problem:
osd on viu2 present timeout
Solution:
add wait_hw_vsync_viu2
Verify:
Verified on X30A1-T962X2
Change-Id: Iab80f4cef830652923e1de73eba6d87715bad855
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
apollo.ling [Tue, 25 Jun 2019 03:11:48 +0000 (11:11 +0800)]
vfm: string without null-termination [1/1]
PD#OTT-4743
Problem:
string withou null-termination
Solution:
ensure there is a null-termination in the string
Verify:
p212
Change-Id: Icfb6e39741b5d26611bbd316d6c423b8d4715105
Signed-off-by: apollo.ling <apollo.ling@amlogic.com>
MingLiang Dong [Fri, 28 Jun 2019 13:03:34 +0000 (21:03 +0800)]
vpp: optimize rgb screen convert coef [1/1]
PD#TV-7280
Problem:
rgb screen pattern white balance data is a little high
Solution:
optimize convert coef
Verify:
verify on TL1
Change-Id: Iae1e8134d1a48fe0bbf206dd9b148c264951da2a
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Wenfeng Guo [Fri, 5 Jul 2019 03:22:59 +0000 (11:22 +0800)]
di: fix sawtooth in the lower patr of AV video [1/1]
PD#SWPL-10831
Problem:
sawtooth in the lower patr of AV video
Solution:
adjust motion num condition
Verify:
marconi
Change-Id: Id42f1cb2d3f702e04cd640dbc99c4f7a97447faf
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
Yong Qin [Thu, 4 Jul 2019 11:02:06 +0000 (19:02 +0800)]
vdin: hdr mode force 10bit mode [1/1]
PD#TV-7517
Problem:
hdmi hdr color deepth mode is auto, if input
is 8bit mode, output is 8bit mode
Solution:
when is hdr mode, force set 10bit mode to frame
buffer.
Verify:
tl1
Change-Id: If958f687e3923389277880e19d47f933421a8292
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Zhe Wang [Thu, 4 Jul 2019 14:21:26 +0000 (22:21 +0800)]
audio: set master/channel default volume higher [1/1]
PD#SWPL-10609
Problem:
spk sound is too low
Solution:
set master/channel default volume higher
Verify:
r341
Change-Id: Id2928a7d0fdfbb745d272c82a7600a6f4fb9b7e6
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Luan Yuan [Fri, 5 Jul 2019 07:43:43 +0000 (15:43 +0800)]
dts: set s912 adb. [1/1]
PD#SWPL-10860
Problem:
s912 need to support adb.
Solution:
update dts
Verify:
verify by hertz
Change-Id: I085a0442d229d13d02b963c948d390920aea3dd0
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Jihong Sui [Thu, 4 Jul 2019 06:46:57 +0000 (14:46 +0800)]
deinterace: add cue init setting [1/1]
PD#SWPL-7864
Problem:
the red and blue areas of the fourth frequency band
are missing color serious
Solution:
debug by VLSI(yanling), add cue init setting;
Verify:
S905X3
Change-Id: Idc8e5e811e0f2a8195cc70ebb8df0af8f080b174
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Sunny Luo [Wed, 19 Jun 2019 08:41:54 +0000 (16:41 +0800)]
dts: T312: config spicc amlogic driver to support dirspi_xxx [1/1]
PD#SWPL-9815
Problem:
One T312-T962X3 project need use the dirspi_xxx interfaces to
communicate with a extern mcu(spi device).
Solution:
config dts to use spicc amlogic-driver to support dirspi_xxx
Verify:
T312
Change-Id: Icad0e516b5d694b86350fec1e9322170e84d9c8f
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Jian Cao [Thu, 27 Jun 2019 06:20:46 +0000 (14:20 +0800)]
ge2d: add return value check for kstrtoint call [1/1]
PD#OTT-4875
Problem:
missing return value check for kstrtoint
Solution:
add this check for kstrtoint
Verify:
verified on g12b-w400
Change-Id: I0515b4b445c78d950201df6547e83578cac32d16
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
deng.liu [Mon, 1 Jul 2019 13:05:57 +0000 (21:05 +0800)]
common: modify the dtsi config of sm1 and tm2 [1/2]
PD#SWPL-10241
Problem:
{Score:5}{vts_r9}[S905X3] VtsHalNeuralnetworksV1_1Target module 644 fail;
v0624 new add, v0613 ok;
Solution:
npu not insmod successfully,modify dtsi config
Verify:
Local on sm1
Change-Id: I986e37acab4a76cdf6ad52620520994193a06448
Signed-off-by: deng.liu <deng.liu@amlogic.com>