x86/debug: Fix stack recursion caused by wrongly ordered DR7 accesses

commit 9d2c7203ffdb846399b82b0660563c89e918c751 upstream.

In kernels compiled with CONFIG_PARAVIRT=n, the compiler re-orders the
DR7 read in exc_nmi() to happen before the call to sev_es_ist_enter().

This is problematic when running as an SEV-ES guest because in this
environment the DR7 read might cause a #VC exception, and taking #VC
exceptions is not safe in exc_nmi() before sev_es_ist_enter() has run.

The result is stack recursion if the NMI was caused on the #VC IST
stack, because a subsequent #VC exception in the NMI handler will
overwrite the stack frame of the interrupted #VC handler.

As there are no compiler barriers affecting the ordering of DR7
reads/writes, make the accesses to this register volatile, forbidding
the compiler to re-order them.

  [ bp: Massage text, make them volatile too, to make sure some
  aggressive compiler optimization pass doesn't discard them. ]

Fixes: 315562c9af3d ("x86/sev-es: Adjust #VC IST Stack on entering NMI handler")
Reported-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230127035616.508966-1-aik@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HV: hv_balloon: fix memory leak with using debugfs_lookup()

commit 6dfb0771429a63db8561d44147f2bb76f93e1c86 upstream.

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Fixes: d180e0a1be6c ("Drivers: hv: Create debugfs file with hyper-v balloon usage information")
Cc: stable <stable@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230202140918.2289522-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup()

commit d83d7ed260283560700d4034a80baad46620481b upstream.

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable <stable@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230202151554.2310273-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: do not clear gadget driver.bus

commit 30d09b3131f5b1b9d54ad9b7ee171a45e21362b3 upstream.

Before the commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets")
gadget driver.bus was unused. For whatever reason, many UDC drivers set
this field explicitly to NULL in udc_start(). With the newly added gadget
bus, doing this will crash the driver during the attach.

The problem was first reported, fixed and tested with OMAP UDC and g_ether.
Other drivers are changed based on code analysis only.

Fixes: fc274c1e9973 ("USB: gadget: Add a new bus for gadgets")
Cc: stable <stable@kernel.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230201220125.GD2415@darkstar.musicnaut.iki.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Don't attempt to resume the ports before they exist

commit f82060da749c611ed427523b6d1605d87338aac1 upstream.

This will fix null pointer dereference that was caused by
the driver attempting to resume ports that were not yet
registered.

Fixes: e0dced9c7d47 ("usb: typec: ucsi: Resume in separate work")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216697
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230131141518.78215-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_uac2: Fix incorrect increment of bNumEndpoints

commit 2fa89458af9993fab8054daf827f38881e2ad473 upstream.

Currently connect/disconnect of USB cable calls afunc_bind and
eventually increments the bNumEndpoints. Performing multiple
plugin/plugout will increment bNumEndpoints incorrectly, and on
the next plug-in it leads to invalid configuration of descriptor
and hence enumeration fails.

Fix this by resetting the value of bNumEndpoints to 1 on every
afunc_bind call.

Fixes: 40c73b30546e ("usb: gadget: f_uac2: add adaptive sync support for capture")
Cc: stable <stable@kernel.org>
Signed-off-by: Pratham Pratap <quic_ppratap@quicinc.com>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/1674631645-28888-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath()

commit ac86f547ca1002aec2ef66b9e64d03f45bbbfbb9 upstream.

As commit 18365225f044 ("hwpoison, memcg: forcibly uncharge LRU pages"),
hwpoison will forcibly uncharg a LRU hwpoisoned page, the folio_memcg
could be NULl, then, mem_cgroup_track_foreign_dirty_slowpath() could
occurs a NULL pointer dereference, let's do not record the foreign
writebacks for folio memcg is null in mem_cgroup_track_foreign_dirty() to
fix it.

Link: https://lkml.kernel.org/r/20230129040945.180629-1-wangkefeng.wang@huawei.com
Fixes: 97b27821b485 ("writeback, memcg: Implement foreign dirty flushing")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reported-by: Ma Wupeng <mawupeng1@huawei.com>
Tested-by: Miko Larsson <mikoxyzzz@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Ma Wupeng <mawupeng1@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps

commit 3489dbb696d25602aea8c3e669a6d43b76bd5358 upstream.

Patch series "Fixes for hugetlb mapcount at most 1 for shared PMDs".

This issue of mapcount in hugetlb pages referenced by shared PMDs was
discussed in [1].  The following two patches address user visible behavior
caused by this issue.

[1] https://lore.kernel.org/linux-mm/Y9BF+OCdWnCSilEu@monkey/

This patch (of 2):

A hugetlb page will have a mapcount of 1 if mapped by multiple processes
via a shared PMD.  This is because only the first process increases the
map count, and subsequent processes just add the shared PMD page to their
page table.

page_mapcount is being used to decide if a hugetlb page is shared or
private in /proc/PID/smaps.  Pages referenced via a shared PMD were
incorrectly being counted as private.

To fix, check for a shared PMD if mapcount is 1.  If a shared PMD is found
count the hugetlb page as shared.  A new helper to check for a shared PMD
is added.

[akpm@linux-foundation.org: simplification, per David]
[akpm@linux-foundation.org: hugetlb.h: include page_ref.h for page_count()]
Link: https://lkml.kernel.org/r/20230126222721.222195-2-mike.kravetz@oracle.com
Fixes: 25ee01a2fca0 ("mm: hugetlb: proc: add hugetlb-related fields to /proc/PID/smaps")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: multi-gen LRU: fix crash during cgroup migration

commit de08eaa6156405f2e9369f06ba5afae0e4ab3b62 upstream.

lru_gen_migrate_mm() assumes lru_gen_add_mm() runs prior to itself.  This
isn't true for the following scenario:

    CPU 1                         CPU 2

  clone()
    cgroup_can_fork()
                                cgroup_procs_write()
    cgroup_post_fork()
                                  task_lock()
                                  lru_gen_migrate_mm()
                                  task_unlock()
    task_lock()
    lru_gen_add_mm()
    task_unlock()

And when the above happens, kernel crashes because of linked list
corruption (mm_struct->lru_gen.list).

Link: https://lore.kernel.org/r/20230115134651.30028-1-msizanoen@qtmlabs.xyz/
Link: https://lkml.kernel.org/r/20230116034405.2960276-1-yuzhao@google.com
Fixes: bd74fdaea146 ("mm: multi-gen LRU: support page table walks")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: msizanoen <msizanoen@qtmlabs.xyz>
Tested-by: msizanoen <msizanoen@qtmlabs.xyz>
Cc: <stable@vger.kernel.org> [6.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "mm: kmemleak: alloc gray object for reserved region with direct map"

commit 8ef852f1cb426a5812aee700d3b4297aaa426acc upstream.

This reverts commit 972fa3a7c17c9d60212e32ecc0205dc585b1e769.

Kmemleak operates by periodically scanning memory regions for pointers to
allocated memory blocks to determine if they are leaked or not.  However,
reserved memory regions can be used for DMA transactions between a device
and a CPU, and thus, wouldn't contain pointers to allocated memory blocks,
making them inappropriate for kmemleak to scan.  Thus, revert this commit.

Link: https://lkml.kernel.org/r/20230124230254.295589-1-isaacmanjarres@google.com
Fixes: 972fa3a7c17c9 ("mm: kmemleak: alloc gray object for reserved region with direct map")
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Calvin Zhang <calvinzhang.cool@gmail.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: <stable@vger.kernel.org> [5.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: disable generation of unwind tables

commit 2f394c0e7d1129a35156e492bc8f445fb20f43ac upstream.

GCC 13 will enable -fasynchronous-unwind-tables by default on riscv.  In
the kernel, we don't have any use for unwind tables yet, so disable them.
More importantly, the .eh_frame section brings relocations
(R_RISC_32_PCREL, R_RISCV_SET{6,8,16}, R_RISCV_SUB{6,8,16}) into modules
that we are not prepared to handle.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Link: https://lore.kernel.org/r/mvmzg9xybqu.fsf@suse.de
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case

commit 316f1f42b5cc1d95124c1f0387c867c1ba7b6d0e upstream.

Wire up the missing ptrace requests PTRACE_GETREGS, PTRACE_SETREGS,
PTRACE_GETFPREGS and PTRACE_SETFPREGS when running 32-bit applications
on 64-bit kernels.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Replace hardcoded value with PRIV_USER constant in ptrace.c

commit 3f0c17809a098d3f0c1ec83f1fb3ca61638d3dcd upstream.

Prefer usage of the PRIV_USER constant over the hard-coded value to set
the lowest 2 bits for the userspace privilege.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 5.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix return code of pdc_iodc_print()

commit 5d1335dabb3c493a3d6d5b233953b6ac7b6c1ff2 upstream.

There is an off-by-one if the printed string includes a new-line
char.

Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: qcom-spmi-sdam: fix module autoloading

commit 1ca7fca349316231bbaa68d16f819a08d683c5a7 upstream.

Add the missing module device table so that the driver can be autoloaded
when built as a module.

Fixes: 40ce9798794f ("nvmem: add QTI SDAM driver")
Cc: stable@vger.kernel.org # 5.6
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-11-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: sunxi_sid: Always use 32-bit MMIO reads

commit c151d5ed8e8fe0474bd61dce7f2076ca5916c683 upstream.

The SID SRAM on at least some SoCs (A64 and D1) returns different values
when read with bus cycles narrower than 32 bits. This is not immediately
obvious, because memcpy_fromio() uses word-size accesses as long as
enough data is being copied.

The vendor driver always uses 32-bit MMIO reads, so do the same here.
This is faster than the register-based method, which is currently used
as a workaround on A64. And it fixes the values returned on D1, where
the SRAM method was being used.

The special case for the last word is needed to maintain .word_size == 1
for sysfs ABI compatibility, as noted previously in commit de2a3eaea552
("nvmem: sunxi_sid: Optimize register read-out method").

Fixes: 07ae4fde9efa ("nvmem: sunxi_sid: Add support for D1 variant")
Cc: stable@vger.kernel.org
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: brcm_nvram: Add check for kzalloc

commit b0576ade3aaf24b376ea1a4406ae138e2a22b0c0 upstream.

Add the check for the return value of kzalloc in order to avoid
NULL pointer dereference.

Fixes: 6e977eaa8280 ("nvmem: brcm_nvram: parse NVRAM content into NVMEM cells")
Cc: stable@vger.kernel.org
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: fix MAGN sensor scale and unit

commit 2acd031347f645871959a799238a7caf6803aa18 upstream.

+/-1200uT is a MAGN sensor full measurement range. Magnetometer scale
is the magnetic sensitivity parameter. It is referenced as 0.1uT
according to datasheet and magnetometer channel unit is Gauss in
sysfs-bus-iio documentation. Gauss and uTesla unit conversion
relationship as follows: 0.1uT = 0.001Gs.

Set magnetometer scale and available magnetometer scale as fixed 0.001Gs.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20230118074227.1665098-5-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN

commit ff5e2cd92ffda9a25ffa2cbdb3a0cf17650172a6 upstream.

FXOS8700_CTRL_ODR_MIN is not used but value is probably wrong.

Remove it for a good readability.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20230118074227.1665098-4-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: fix failed initialization ODR mode assignment

commit eb6d8f8705bc19141bac81d8161461f9e256948a upstream.

The absence of correct offset leads a failed initialization ODR mode
assignment.

Select MAX ODR mode as the initialization ODR mode by field mask and
FIELD_PREP.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20230118074227.1665098-3-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: fix incorrect ODR mode readback

commit 78ad6864e9e012cdba7c353d044d21ffcfd5f34b upstream.

The absence of a correct offset leads an incorrect ODR mode
readback after use a hexadecimal number to mark the value from
FXOS8700_CTRL_REG1.

Get ODR mode by field mask and FIELD_GET clearly and conveniently.
And attach other additional fix for keeping the original code logic
and a good readability.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20230118074227.1665098-2-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: fix swapped ACCEL and MAGN channels readback

commit c68b44bc7d9b1469774a1c985ee71d2cbc5ebef5 upstream.

Because ACCEL and MAGN channels data register base address is
swapped the accelerometer and magnetometer channels readback is
swapped.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-3-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: fix map label of channel type to MAGN sensor

commit 429e1e8ec696e0e7a0742904e3dc2f83b7b23dfb upstream.

FXOS8700 is an IMU sensor with ACCEL sensor and MAGN sensor.
Sensor type is indexed by corresponding channel type in a switch.
IIO_ANGL_VEL channel type mapped to MAGN sensor has caused confusion.

Fix the mapping label of "IIO_MAGN" channel type instead of
"IIO_ANGL_VEL" channel type to MAGN sensor.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-2-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: fix IMU data bits returned to user space

commit a53f945879c0cb9de3a4c05a665f5157884b5208 upstream.

ACCEL output data registers contain the X-axis, Y-axis, and Z-axis
14-bit left-justified sample data and MAGN output data registers
contain the X-axis, Y-axis, and Z-axis 16-bit sample data. The ACCEL
raw register output data should be divided by 4 before sent to
userspace.

Apply a 2 bits signed right shift to the raw data from ACCEL output
data register but keep that from MAGN sensor as the origin.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-5-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: fix incomplete ACCEL and MAGN channels readback

commit 37a94d86d7050665d6d01378b2c916c28e454f10 upstream.

The length of ACCEL and MAGN 3-axis channels output data is 6 byte
individually. However block only read 3 bytes data into buffer from
ACCEL or MAGN output data registers every time. It causes an incomplete
ACCEL and MAGN channels readback.

Set correct value count for regmap_bulk_read to get 6 bytes ACCEL and
MAGN channels readback.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-4-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: fix ACCEL measurement range selection

commit 9d61c1820598a5ea474576ed55318a6dadee37ed upstream.

When device is in active mode, it fails to set an ACCEL full-scale
range(2g/4g/8g) in FXOS8700_XYZ_DATA_CFG. This is not align with the
datasheet, but it is a fxos8700 chip behavior.

Keep the device in standby mode before setting ACCEL full-scale range
into FXOS8700_XYZ_DATA_CFG in chip initialization phase and setting
scale phase.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-6-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: light: cm32181: Fix PM support on system with 2 I2C resources

commit ee3c5b644a0fdcfed27515a39fb2dd3a016704c1 upstream.

Commit c1e62062ff54 ("iio: light: cm32181: Handle CM3218 ACPI devices
with 2 I2C resources") creates a second client for the actual I2C
address, but the "struct device" passed to PM ops is the first I2C
client that can't talk to the sensor.

That means the I2C transfers in both suspend and resume routines can
fail and blocking the whole suspend process.

Instead of using the first client for I2C transfer, use the I2C client
stored in the cm32181 private struct so the PM ops can get the correct
I2C client to really talk to the sensor device.

Fixes: 68c1b3dd5c48 ("iio: light: cm32181: Add PM support")
BugLink: https://bugs.launchpad.net/bugs/1988346
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2152281
Tested-by: Wahaj <wahajaved@protonmail.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230118170422.339619-1-kai.heng.feng@canonical.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:adc:twl6030: Enable measurements of VUSB, VBAT and others

commit f804bd0dc28683a93a60f271aaefb2fc5b0853dd upstream.

Some inputs need to be wired up to produce proper measurements,
without this change only near zero values are reported.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Fixes: 1696f36482e70 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver")
Link: https://lore.kernel.org/r/20221201181635.3522962-1-andreas@kemnade.info
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw()

commit 0fc3562a993c3dc41d1177b3983d9300d0db1d4d upstream.

irq flood happen when run
    cat /sys/bus/iio/devices/iio:device0/in_voltage1_raw

imx8qxp_adc_read_raw()
{
...
enable irq
/* adc start */
writel(1, adc->regs + IMX8QXP_ADR_ADC_SWTRIG);
^^^^ trigger irq flood.
wait_for_completion_interruptible_timeout();
readl(adc->regs + IMX8QXP_ADR_ADC_RESFIFO);
^^^^ clear irq here.
...
}

There is only FIFO watermark interrupt at this ADC controller.
IRQ line will be assert until software read data from FIFO.
So IRQ flood happen during wait_for_completion_interruptible_timeout().

Move FIFO read into irq handle to avoid irq flood.

Fixes: 1e23dcaa1a9f ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC")
Cc: stable@vger.kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20221201140110.2653501-1-Frank.Li@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: berlin2-adc: Add missing of_node_put() in error path

commit cbd3a0153cd18a2cbef6bf3cf31bb406c3fc9f55 upstream.

of_get_parent() will return a device_node pointer with refcount
incremented. We need to use of_node_put() on it when done. Add the
missing of_node_put() in the error path of berlin2_adc_probe();

Fixes: 70f1937911ca ("iio: adc: add support for Berlin")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221129020316.191731-1-wangxiongfeng2@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: xilinx-ams: fix devm_krealloc() return value check

commit 6794ed0cfcc6ce737240eccc48b3e8190df36703 upstream.

The clang-analyzer reported a warning: "Value stored to 'ret'
is never read".

Fix the return value check if devm_krealloc() fails to resize
ams_channels.

Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20221125113112.219290-1-marpagan@redhat.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: hid: fix the retval in gyro_3d_capture_sample

commit eb50cd5bfdac61627a5026566cf3b90ced7b141c upstream.

Return value should be zero for success. This was forgotten for timestamp
feature. Verified on RealSense cameras.

Fixes: 4648cbd8fb92 ("iio: hid-sensor-gyro-3d: Add timestamp channel")
Signed-off-by: Dmitry Perchanov <dmitry.perchanov@intel.com>
Link: https://lore.kernel.org/r/7c1809dc74eb2f58a20595f4d02e76934f8e9219.camel@intel.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: hid: fix the retval in accel_3d_capture_sample

commit f7b23d1c35d8b8de1425bdfccaefd01f3b7c9d1c upstream.

Return value should be zero for success. This was forgotten for timestamp
feature. Verified on RealSense cameras.

Fixes: a96cd0f901ee ("iio: accel: hid-sensor-accel-3d: Add timestamp")
Signed-off-by: Dmitry Perchanov <dmitry.perchanov@intel.com>
Link: https://lore.kernel.org/r/a6dc426498221c81fa71045b41adf782ebd42136.camel@intel.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: efi: Enable SET/GET WAKEUP services as optional

commit 101ca8d05913b7d1e6e8b9dd792193d4082fff86 upstream.

The current implementation of rtc-efi is expecting all the 4
time services GET{SET}_TIME{WAKEUP} must be supported by UEFI
firmware. As per the EFI_RT_PROPERTIES_TABLE, the platform
specific implementations can choose to enable selective time
services based on the RTC device capabilities.

This patch does the following changes to provide GET/SET RTC
services on platforms that do not support the WAKEUP feature.

1) Relax time services cap check when creating a platform device.
2) Clear RTC_FEATURE_ALARM bit in the absence of WAKEUP services.
3) Conditional alarm entries in '/proc/driver/rtc'.

Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Link: https://lore.kernel.org/r/20230102230630.192911-1-sdonthineni@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: Accept version 2 of memory attributes table

commit 636ab417a7aec4ee993916e688eb5c5977570836 upstream.

UEFI v2.10 introduces version 2 of the memory attributes table, which
turns the reserved field into a flags field, but is compatible with
version 1 in all other respects. So let's not complain about version 2
if we encounter it.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: SOF: keep prepare/unprepare widgets in sink path

commit cc755b4377b0520d594ae573497cf0824baea648 upstream.

The existing code return when a widget doesn't need to
prepare/unprepare. This will prevent widgets in the sink path from being
prepared/unprepared.

Cc: <stable@vger.kernel.org> # 6.1
Link: https://github.com/thesofproject/linux/issues/4021
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230118101255.29139-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: SOF: sof-audio: skip prepare/unprepare if swidget is NULL

commit 0ad84b11f2f8dd19d62d0b2ffd95ece897e6c3dc upstream.

Skip preparing/unpreparing widgets if the swidget pointer is NULL. This
will be true in the case of virtual widgets in topology that were added
for reusing the legacy HDA machine driver with SOF.

Fixes: 9862dcf70245 ("ASoC: SOF: don't unprepare widget used other pipelines")
Cc: <stable@vger.kernel.org> # 6.1
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230118101255.29139-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: SOF: sof-audio: unprepare when swidget->use_count > 0

commit 7d2a67e02549c4b1feaac4d8b4151bf46424a047 upstream.

We should unprepare the widget if its use_count = 1.

Fixes: 9862dcf70245 ("ASoC: SOF: don't unprepare widget used other pipelines")
Cc: <stable@vger.kernel.org> # 6.1
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230118101255.29139-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codecs: wsa883x: correct playback min/max rates

commit 100c94ffde489ee11e23400f2a07b236144b048f upstream.

Correct reversed values used in min/max rates, leading to incorrect
playback constraints.

Cc: <stable@vger.kernel.org>
Fixes: 43b8c7dc85a1 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230124123049.285395-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix mute/micmute LEDs, speaker don't work for a HP platform

commit 858c54152658ccd4e305c1e12d3cc6825bc90504 upstream.

There is a HP platform needs ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED quirk to
make mic-mute/audio-mute/speaker working.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230118115446.14902-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add Acer Predator PH315-54

commit 6a28a25d358079b7d0d144689f850aecacf63cba upstream.

Same issue as SP513-54N: Headset microphone does not work without
ALC255_FIXUP_ACER_MIC_NO_PRESENCE fixup.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211853
Cc: <stable@vger.kernel.org>
Signed-off-by: Victor Shyba <victor1984@riseup.net>
Link: https://lore.kernel.org/r/20230123222129.17589-1-victor1984@riseup.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: diag288_wdt: fix __diag288() inline assembly

commit 32e40f9506b9e32917eb73154f93037b443124d1 upstream.

The DIAG 288 statement consumes an EBCDIC string the address of which is
passed in a register. Use a "memory" clobber to tell the compiler that
memory is accessed within the inline assembly.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: diag288_wdt: do not use stack buffers for hardware data

commit fe8973a3ad0905cb9ba2d42db42ed51de14737df upstream.

With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space.
Data passed to a hardware or a hypervisor interface that
requires V=R can no longer be allocated on the stack.

Use kmalloc() to get memory for a diag288 command.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: isotp: handle wait_event_interruptible() return values

commit 823b2e42720f96f277940c37ea438b7c5ead51a4 upstream.

When wait_event_interruptible() has been interrupted by a signal the
tx.state value might not be ISOTP_IDLE. Force the state machines
into idle state to inhibit the timer handlers to continue working.

Fixes: 866337865f37 ("can: isotp: fix tx state handling for echo tx processing")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230112192347.1944-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: isotp: split tx timer into transmission and timeout

commit 4f027cba8216f42a18b544842efab134f8b1f9f4 upstream.

The timer for the transmission of isotp PDUs formerly had two functions:
1. send two consecutive frames with a given time gap
2. monitor the timeouts for flow control frames and the echo frames

This led to larger txstate checks and potentially to a problem discovered
by syzbot which enabled the panic_on_warn feature while testing.

The former 'txtimer' function is split into 'txfrtimer' and 'txtimer'
to handle the two above functionalities with separate timer callbacks.

The two simplified timers now run in one-shot mode and make the state
transitions (especially with isotp_rcv_echo) better understandable.

Fixes: 866337865f37 ("can: isotp: fix tx state handling for echo tx processing")
Reported-by: syzbot+5aed6c3aaba661f5b917@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # >= v6.0
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230104145701.2422-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qrtr: free memory on error path in radix_tree_insert()

commit 29de68c2b32ce58d64dea496d281e25ad0f551bd upstream.

Function radix_tree_insert() returns errors if the node hasn't
been initialized and added to the tree.

"kfree(node)" and return value "NULL" of node_get() help
to avoid using unclear node in other calls.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Cc: <stable@vger.kernel.org> # 5.7
Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20230125134831.8090-1-n.petrova@fintech.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx7d-smegw01: Fix USB host over-current polarity

commit 1febf88ef907b142fdde34f7c64ed3535d9339e4 upstream.

Currently, when resetting the USB modem via AT commands, the modem is
no longer re-connected.

This problem is caused by the incorrect description of the USB_OTG2_OC
pad. It should have pull-up enabled, hysteresis enabled and the
property 'over-current-active-low' should be passed.

With this change, the USB modem can be successfully re-connected
after a reset.

Cc: stable@vger.kernel.org
Fixes: 9ac0ae97e349 ("ARM: dts: imx7d-smegw01: Add support for i.MX7D SMEGW01 board")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_netvsc: Fix missed pagebuf entries in netvsc_dma_map/unmap()

commit 99f1c46011cc0feb47d4f4f7bee70a0341442d14 upstream.

netvsc_dma_map() and netvsc_dma_unmap() currently check the cp_partial
flag and adjust the page_count so that pagebuf entries for the RNDIS
portion of the message are skipped when it has already been copied into
a send buffer. But this adjustment has already been made by code in
netvsc_send(). The duplicate adjustment causes some pagebuf entries to
not be mapped. In a normal VM, this doesn't break anything because the
mapping doesn’t change the PFN. But in a Confidential VM,
dma_map_single() does bounce buffering and provides a different PFN.
Failing to do the mapping causes the wrong PFN to be passed to Hyper-V,
and various errors ensue.

Fix this by removing the duplicate adjustment in netvsc_dma_map() and
netvsc_dma_unmap().

Fixes: 846da38de0e8 ("net: netvsc: Add Isolation VM support for netvsc driver")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1675135986-254490-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup/cpuset: Fix wrong check in update_parent_subparts_cpumask()

commit e5ae8803847b80fe9d744a3174abe2b7bfed222a upstream.

It was found that the check to see if a partition could use up all
the cpus from the parent cpuset in update_parent_subparts_cpumask()
was incorrect. As a result, it is possible to leave parent with no
effective cpu left even if there are tasks in the parent cpuset. This
can lead to system panic as reported in [1].

Fix this probem by updating the check to fail the enabling the partition
if parent's effective_cpus is a subset of the child's cpus_allowed.

Also record the error code when an error happens in update_prstate()
and add a test case where parent partition and child have the same cpu
list and parent has task. Enabling partition in the child will fail in
this case.

[1] https://www.spinics.net/lists/cgroups/msg36254.html

Fixes: f0af1bfc27b5 ("cgroup/cpuset: Relax constraints to partition & cpus changes")
Cc: stable@vger.kernel.org # v6.1
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbcon: Check font dimension limits

commit 2b09d5d364986f724f17001ccfe4126b9b43a0be upstream.

blit_x and blit_y are u32, so fbcon currently cannot support fonts
larger than 32x32.

The 32x32 case also needs shifting an unsigned int, to properly set bit
31, otherwise we get "UBSAN: shift-out-of-bounds in fbcon_set_font",
as reported on:

http://lore.kernel.org/all/IA1PR07MB98308653E259A6F2CE94A4AFABCE9@IA1PR07MB9830.namprd07.prod.outlook.com
Kernel Branch: 6.2.0-rc5-next-20230124
Kernel config: https://drive.google.com/file/d/1F-LszDAizEEH0ZX0HcSR06v5q8FPl2Uv/view?usp=sharing
Reproducer: https://drive.google.com/file/d/1mP1jcLBY7vWCNM60OMf-ogw-urQRjNrm/view?usp=sharing

Reported-by: Sanan Hasanov <sanan.hasanov@Knights.ucf.edu>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Fixes: 2d2699d98492 ("fbcon: font setting should check limitation of driver")
Cc: stable@vger.kernel.org
Tested-by: Miko Larsson <mikoxyzzz@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF

[ Upstream commit 226fae124b2dac217ea5436060d623ff3385bc34 ]

After a call to console_unlock() in vcs_read() the vc_data struct can be
freed by vc_deallocate(). Because of that, the struct vc_data pointer
load must be done at the top of while loop in vcs_read() to avoid a UAF
when vcs_size() is called.

Syzkaller reported a UAF in vcs_size().

BUG: KASAN: use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215)
Read of size 4 at addr ffff8881137479a8 by task 4a005ed81e27e65/1537

CPU: 0 PID: 1537 Comm: 4a005ed81e27e65 Not tainted 6.2.0-rc5 #1
Hardware name: Red Hat KVM, BIOS 1.15.0-2.module
Call Trace:
  <TASK>
__asan_report_load4_noabort (mm/kasan/report_generic.c:350)
vcs_size (drivers/tty/vt/vc_screen.c:215)
vcs_read (drivers/tty/vt/vc_screen.c:415)
vfs_read (fs/read_write.c:468 fs/read_write.c:450)
...
  </TASK>

Allocated by task 1191:
...
kmalloc_trace (mm/slab_common.c:1069)
vc_allocate (./include/linux/slab.h:580 ./include/linux/slab.h:720
     drivers/tty/vt/vt.c:1128 drivers/tty/vt/vt.c:1108)
con_install (drivers/tty/vt/vt.c:3383)
tty_init_dev (drivers/tty/tty_io.c:1301 drivers/tty/tty_io.c:1413
     drivers/tty/tty_io.c:1390)
tty_open (drivers/tty/tty_io.c:2080 drivers/tty/tty_io.c:2126)
chrdev_open (fs/char_dev.c:415)
do_dentry_open (fs/open.c:883)
vfs_open (fs/open.c:1014)
...

Freed by task 1548:
...
kfree (mm/slab_common.c:1021)
vc_port_destruct (drivers/tty/vt/vt.c:1094)
tty_port_destructor (drivers/tty/tty_port.c:296)
tty_port_put (drivers/tty/tty_port.c:312)
vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2))
vt_ioctl (drivers/tty/vt/vt_ioctl.c:903)
tty_ioctl (drivers/tty/tty_io.c:2776)
...

The buggy address belongs to the object at ffff888113747800
  which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 424 bytes inside of
  1024-byte region [ffff888113747800, ffff888113747c00)

The buggy address belongs to the physical page:
page:00000000b3fe6c7c refcount:1 mapcount:0 mapping:0000000000000000
     index:0x0 pfn:0x113740
head:00000000b3fe6c7c order:3 compound_mapcount:0 subpages_mapcount:0
     compound_pincount:0
anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
raw: 0017ffffc0010200 ffff888100042dc0 0000000000000000 dead000000000001
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff888113747880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff888113747900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff888113747980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                   ^
  ffff888113747a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff888113747a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint

Fixes: ac751efa6a0d ("console: rename acquire/release_console_sem() to console_lock/unlock()")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Link: https://lore.kernel.org/r/1674577014-12374-1-git-send-email-george.kennedy@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: f_fs: Fix unbalanced spinlock in __ffs_ep0_queue_wait

[ Upstream commit 921deb9da15851425ccbb6ee409dc2fd8fbdfe6b ]

__ffs_ep0_queue_wait executes holding the spinlock of &ffs->ev.waitq.lock
and unlocks it after the assignments to usb_request are done.
However in the code if the request is already NULL we bail out returning
-EINVAL but never unlocked the spinlock.

Fix this by adding spin_unlock_irq &ffs->ev.waitq.lock before returning.

Fixes: 6a19da111057 ("usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Link: https://lore.kernel.org/r/20230124091149.18647-1-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: qcom: enable vbus override when in OTG dr-mode

[ Upstream commit eb320f76e31dc835b9f57f04af1a2353b13bb7d8 ]

With vbus override enabled when in OTG dr_mode, Host<->Peripheral
switch now works on SM8550, otherwise the DWC3 seems to be stuck
in Host mode only.

Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230123-topic-sm8550-upstream-dwc3-qcom-otg-v2-1-2d400e598463@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: stm32-dfsdm: fill module aliases

[ Upstream commit cc3304052a89ab6ac887ed9224420a27e3d354e1 ]

When STM32 DFSDM driver is built as module, no modalias information
is available. This prevents module to be loaded by udev.
Add MODULE_DEVICE_TABLE() to fill module aliases.

Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20221202152848.45585-1-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: Silence memcpy() run-time false positive warnings

[ Upstream commit be0d8f48ad97f5b775b0af3310343f676dbf318a ]

struct bkey has internal padding in a union, but it isn't always named
the same (e.g. key ## _pad, key_p, etc). This makes it extremely hard
for the compiler to reason about the available size of copies done
against such keys. Use unsafe_memcpy() for now, to silence the many
run-time false positive warnings:

  memcpy: detected field-spanning write (size 264) of single field "&i->j" at drivers/md/bcache/journal.c:152 (size 240)
  memcpy: detected field-spanning write (size 24) of single field "&b->key" at drivers/md/bcache/btree.c:939 (size 16)
  memcpy: detected field-spanning write (size 24) of single field "&temp.key" at drivers/md/bcache/extents.c:428 (size 16)

Reported-by: Alexandre Pereira <alexpereira@disroot.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216785
Acked-by: Coly Li <colyli@suse.de>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: linux-bcache@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230106060229.never.047-kees@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix timing not changning when freesync video is enabled

[ Upstream commit 4b069553246f993c4221e382d0d0ae34f5ba730e ]

[Why&How]
Switching between certain modes that are freesync video modes and those
are not freesync video modes result in timing not changing as seen by
the monitor due to incorrect timing being driven.

The issue is fixed by ensuring that when a non freesync video mode is
set, we reset the freesync status on the crtc.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/x25: Fix to not accept on connected socket

[ Upstream commit f2b0b5210f67c56a3bcdf92ff665fb285d6e0067 ]

When listen() and accept() are called on an x25 socket
that connect() succeeds, accept() succeeds immediately.
This is because x25_connect() queues the skb to
sk->sk_receive_queue, and x25_accept() dequeues it.

This creates a child socket with the sk of the parent
x25 socket, which can cause confusion.

Fix x25_listen() to return -EINVAL if the socket has
already been successfully connect()ed to avoid this issue.

Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN

[ Upstream commit 8e60615e8932167057b363c11a7835da7f007106 ]

By default when the system is configured for low power idle in the FADT
the keyboard is set up as a wake source.  This matches the behavior that
Windows uses for Modern Standby as well.

It has been reported that a variety of AMD based designs there are
spurious wakeups are happening where two IRQ sources are active.

For example:
```
PM: Triggering wakeup from IRQ 9
PM: Triggering wakeup from IRQ 1
```

In these designs IRQ 9 is the ACPI SCI and IRQ 1 is the keyboard.
One way to trigger this problem is to suspend the laptop and then unplug
the AC adapter.  The SOC will be in a hardware sleep state and plugging
in the AC adapter returns control to the kernel's s2idle loop.

Normally if just IRQ 9 was active the s2idle loop would advance any EC
transactions and no other IRQ being active would cause the s2idle loop
to put the SOC back into hardware sleep state.

When this bug occurred IRQ 1 is also active even if no keyboard activity
occurred. This causes the s2idle loop to break and the system to wake.

This is a platform firmware bug triggering IRQ1 without keyboard activity.
This occurs in Windows as well, but Windows will enter "SW DRIPS" and
then with no activity enters back into "HW DRIPS" (hardware sleep state).

This issue affects Renoir, Lucienne, Cezanne, and Barcelo platforms. It
does not happen on newer systems such as Mendocino or Rembrandt.

It's been fixed in newer platform firmware.  To avoid triggering the bug
on older systems check the SMU F/W version and adjust the policy at suspend
time for s2idle wakeup from keyboard on these systems. A lot of thought
and experimentation has been given around the timing of disabling IRQ1,
and to make it work the "suspend" PM callback is restored.

Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2115
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1951
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230120191519.15926-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: gigabyte-wmi: add support for B450M DS3H WIFI-CF

[ Upstream commit a410429a3b7e748a9db9f357e71e2e085a21c902 ]

To the best of my knowledge this is the same board as the B450M DS3H-CF,
but with an added WiFi card. Name obtained using dmidecode, tested
with force_load on v6.1.6

Signed-off-by: Kevin Kuriakose <kevinmkuriakose@gmail.com>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230119150925.31962-1-kevinmkuriakose@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: hp-wmi: Handle Omen Key event

[ Upstream commit 3ee5447b2048c8389ed899838a40b40180d50906 ]

Add support to map the "HP Omen Key" to KEY_PROG2. Laptops in the HP
Omen Series open the HP Omen Command Center application on windows. But,
on linux it fails with the following message from the hp-wmi driver:

[ 5143.415714] hp_wmi: Unknown event_id - 29 - 0x21a5

Also adds support to map Fn+Esc to KEY_FN_ESC. This currently throws the
following message on the hp-wmi driver:

[ 6082.143785] hp_wmi: Unknown key code - 0x21a7

There is also a "Win-Lock" key on HP Omen Laptops which supports
Enabling and Disabling the Windows key, which trigger commands 0x21a4
and 0x121a4 respectively, but I wasn't able to find any KEY in input.h
to map this to.

Signed-off-by: Rishit Bansal <rishitbansal0@gmail.com>
Link: https://lore.kernel.org/r/20230120221214.24426-1-rishitbansal0@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: dell-wmi: Add a keymap for KEY_MUTE in type 0x0010 table

[ Upstream commit 83bcf3e52e9cfc727df33f1055ef0618c91719d0 ]

Some platforms send the speaker-mute key from EC. dell-wmi can't
recognize it.

Add a new keymap for KEY_MUTE in type 0x0010 table.

Signed-off-by: Koba Ko <koba.ko@canonical.com>
Link: https://lore.kernel.org/r/20230117123436.200440-1-koba.ko@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/build: Move '-mindirect-branch-cs-prefix' out of GCC-only block

[ Upstream commit 27b5de622ea3fe0ad5a31a0ebd9f7a0a276932d1 ]

LLVM 16 will have support for this flag so move it out of the GCC-only
block to allow LLVM builds to take advantage of it.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1665
Link: https://github.com/llvm/llvm-project/commit/6f867f9102838ebe314c1f3661fdf95700386e5a
Link: https://lore.kernel.org/r/20230120165826.2469302-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "gfs2: stop using generic_writepages in gfs2_ail1_start_one"

[ Upstream commit 95ecbd0f162fc06ef4c4045a66f653f47b62a2d3 ]

Commit b2b0a5e97855 switched from generic_writepages() to
filemap_fdatawrite_wbc() in gfs2_ail1_start_one() on the path to
replacing ->writepage() with ->writepages() and eventually eliminating
the former.  Function gfs2_ail1_start_one() is called from
gfs2_log_flush(), our main function for flushing the filesystem log.

Unfortunately, at least as implemented today, ->writepage() and
->writepages() are entirely different operations for journaled data
inodes: while the former creates and submits transactions covering the
data to be written, the latter flushes dirty buffers out to disk.

With gfs2_ail1_start_one() now calling ->writepages(), we end up
creating filesystem transactions while we are in the course of a log
flush, which immediately deadlocks on the sdp->sd_log_flush_lock
semaphore.

Work around that by going back to how things used to work before commit
b2b0a5e97855 for now; figuring out a superior solution will take time we
don't have available right now.  However ...

Since the removal of generic_writepages() is imminent, open-code it
here.  We're already inside a blk_start_plug() ...  blk_finish_plug()
section here, so skip that part of the original generic_writepages().

This reverts commit b2b0a5e978552e348f85ad9c7568b630a5ede659.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: rk3x: fix a bunch of kernel-doc warnings

[ Upstream commit 0582d984793d30442da88fe458674502bad1ad29 ]

Fix multiple W=1 kernel-doc warnings in i2c-rk3x.c:

drivers/i2c/busses/i2c-rk3x.c:83: warning: missing initial short description on line:
 * struct i2c_spec_values:
drivers/i2c/busses/i2c-rk3x.c:139: warning: missing initial short description on line:
 * struct rk3x_i2c_calced_timings:
drivers/i2c/busses/i2c-rk3x.c:162: warning: missing initial short description on line:
 * struct rk3x_i2c_soc_data:
drivers/i2c/busses/i2c-rk3x.c:242: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Generate a START condition, which triggers a REG_INT_START interrupt.
drivers/i2c/busses/i2c-rk3x.c:261: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Generate a STOP condition, which triggers a REG_INT_STOP interrupt.
drivers/i2c/busses/i2c-rk3x.c:304: warning: expecting prototype for Setup a read according to i2c(). Prototype was for rk3x_i2c_prepare_read() instead
drivers/i2c/busses/i2c-rk3x.c:335: warning: expecting prototype for Fill the transmit buffer with data from i2c(). Prototype was for rk3x_i2c_fill_transmit_buf() instead
drivers/i2c/busses/i2c-rk3x.c:535: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Get timing values of I2C specification
drivers/i2c/busses/i2c-rk3x.c:552: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Calculate divider values for desired SCL frequency
drivers/i2c/busses/i2c-rk3x.c:713: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Calculate timing values for desired SCL frequency
drivers/i2c/busses/i2c-rk3x.c:963: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Setup I2C registers for an I2C operation specified by msgs, num.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddress

[ Upstream commit f484a794e4ee2a9ce61f52a78e810ac45f3fe3b3 ]

If during iscsi_sw_tcp_session_create() iscsi_tcp_r2tpool_alloc() fails,
userspace could be accessing the host's ipaddress attr. If we then free the
session via iscsi_session_teardown() while userspace is still accessing the
session we will hit a use after free bug.

Set the tcp_sw_host->session after we have completed session creation and
can no longer fail.

Link: https://lore.kernel.org/r/20230117193937.21244-3-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Acked-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddress

[ Upstream commit 6f1d64b13097e85abda0f91b5638000afc5f9a06 ]

Bug report and analysis from Ding Hui.

During iSCSI session logout, if another task accesses the shost ipaddress
attr, we can get a KASAN UAF report like this:

[  276.942144] BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x78/0xe0
[  276.942535] Write of size 4 at addr ffff8881053b45b8 by task cat/4088
[  276.943511] CPU: 2 PID: 4088 Comm: cat Tainted: G            E      6.1.0-rc8+ #3
[  276.943997] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
[  276.944470] Call Trace:
[  276.944943]  <TASK>
[  276.945397]  dump_stack_lvl+0x34/0x48
[  276.945887]  print_address_description.constprop.0+0x86/0x1e7
[  276.946421]  print_report+0x36/0x4f
[  276.947358]  kasan_report+0xad/0x130
[  276.948234]  kasan_check_range+0x35/0x1c0
[  276.948674]  _raw_spin_lock_bh+0x78/0xe0
[  276.949989]  iscsi_sw_tcp_host_get_param+0xad/0x2e0 [iscsi_tcp]
[  276.951765]  show_host_param_ISCSI_HOST_PARAM_IPADDRESS+0xe9/0x130 [scsi_transport_iscsi]
[  276.952185]  dev_attr_show+0x3f/0x80
[  276.953005]  sysfs_kf_seq_show+0x1fb/0x3e0
[  276.953401]  seq_read_iter+0x402/0x1020
[  276.954260]  vfs_read+0x532/0x7b0
[  276.955113]  ksys_read+0xed/0x1c0
[  276.955952]  do_syscall_64+0x38/0x90
[  276.956347]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[  276.956769] RIP: 0033:0x7f5d3a679222
[  276.957161] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 32 c0 0b 00 e8 a5 fe 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
[  276.958009] RSP: 002b:00007ffc864d16a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[  276.958431] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5d3a679222
[  276.958857] RDX: 0000000000020000 RSI: 00007f5d3a4fe000 RDI: 0000000000000003
[  276.959281] RBP: 00007f5d3a4fe000 R08: 00000000ffffffff R09: 0000000000000000
[  276.959682] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000020000
[  276.960126] R13: 0000000000000003 R14: 0000000000000000 R15: 0000557a26dada58
[  276.960536]  </TASK>
[  276.961357] Allocated by task 2209:
[  276.961756]  kasan_save_stack+0x1e/0x40
[  276.962170]  kasan_set_track+0x21/0x30
[  276.962557]  __kasan_kmalloc+0x7e/0x90
[  276.962923]  __kmalloc+0x5b/0x140
[  276.963308]  iscsi_alloc_session+0x28/0x840 [scsi_transport_iscsi]
[  276.963712]  iscsi_session_setup+0xda/0xba0 [libiscsi]
[  276.964078]  iscsi_sw_tcp_session_create+0x1fd/0x330 [iscsi_tcp]
[  276.964431]  iscsi_if_create_session.isra.0+0x50/0x260 [scsi_transport_iscsi]
[  276.964793]  iscsi_if_recv_msg+0xc5a/0x2660 [scsi_transport_iscsi]
[  276.965153]  iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi]
[  276.965546]  netlink_unicast+0x4d5/0x7b0
[  276.965905]  netlink_sendmsg+0x78d/0xc30
[  276.966236]  sock_sendmsg+0xe5/0x120
[  276.966576]  ____sys_sendmsg+0x5fe/0x860
[  276.966923]  ___sys_sendmsg+0xe0/0x170
[  276.967300]  __sys_sendmsg+0xc8/0x170
[  276.967666]  do_syscall_64+0x38/0x90
[  276.968028]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[  276.968773] Freed by task 2209:
[  276.969111]  kasan_save_stack+0x1e/0x40
[  276.969449]  kasan_set_track+0x21/0x30
[  276.969789]  kasan_save_free_info+0x2a/0x50
[  276.970146]  __kasan_slab_free+0x106/0x190
[  276.970470]  __kmem_cache_free+0x133/0x270
[  276.970816]  device_release+0x98/0x210
[  276.971145]  kobject_cleanup+0x101/0x360
[  276.971462]  iscsi_session_teardown+0x3fb/0x530 [libiscsi]
[  276.971775]  iscsi_sw_tcp_session_destroy+0xd8/0x130 [iscsi_tcp]
[  276.972143]  iscsi_if_recv_msg+0x1bf1/0x2660 [scsi_transport_iscsi]
[  276.972485]  iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi]
[  276.972808]  netlink_unicast+0x4d5/0x7b0
[  276.973201]  netlink_sendmsg+0x78d/0xc30
[  276.973544]  sock_sendmsg+0xe5/0x120
[  276.973864]  ____sys_sendmsg+0x5fe/0x860
[  276.974248]  ___sys_sendmsg+0xe0/0x170
[  276.974583]  __sys_sendmsg+0xc8/0x170
[  276.974891]  do_syscall_64+0x38/0x90
[  276.975216]  entry_SYSCALL_64_after_hwframe+0x63/0xcd

We can easily reproduce by two tasks:
1. while :; do iscsiadm -m node --login; iscsiadm -m node --logout; done
2. while :; do cat \
/sys/devices/platform/host*/iscsi_host/host*/ipaddress; done

            iscsid              |        cat
--------------------------------+---------------------------------------
|- iscsi_sw_tcp_session_destroy |
  |- iscsi_session_teardown     |
    |- device_release           |
      |- iscsi_session_release  ||- dev_attr_show
        |- kfree                |  |- show_host_param_
                                |             ISCSI_HOST_PARAM_IPADDRESS
                                |    |- iscsi_sw_tcp_host_get_param
                                |      |- r/w tcp_sw_host->session (UAF)
  |- iscsi_host_remove          |
  |- iscsi_host_free            |

Fix the above bug by splitting the session removal into 2 parts:

 1. removal from iSCSI class which includes sysfs and removal from host
    tracking.

 2. freeing of session.

During iscsi_tcp host and session removal we can remove the session from
sysfs then remove the host from sysfs. At this point we know userspace is
not accessing the kernel via sysfs so we can free the session and host.

Link: https://lore.kernel.org/r/20230117193937.21244-2-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Acked-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/cstate: Add Emerald Rapids

[ Upstream commit 5a8a05f165fb18d37526062419774d9088c2a9b9 ]

From the perspective of Intel cstate residency counters,
Emerald Rapids is the same as the Sapphire Rapids and Ice Lake.
Add Emerald Rapids model.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230106160449.3566477-2-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel: Add Emerald Rapids

[ Upstream commit 6795e558e9cc6123c24e2100a2ebe88e58a792bc ]

From core PMU's perspective, Emerald Rapids is the same as the Sapphire
Rapids. The only difference is the event list, which will be
supported in the perf tool later.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230106160449.3566477-1-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/aperfmperf: Erase stale arch_freq_scale values when disabling frequency invariance readings

[ Upstream commit 5f5cc9ed992cbab6361f198966f0edba5fc52688 ]

Once disable_freq_invariance_work is called the scale_freq_tick function
will not compute or update the arch_freq_scale values.
However the scheduler will still read these values and use them.
The result is that the scheduler might perform unfair decisions based on stale
values.

This patch adds the step of setting the arch_freq_scale values for all
cpus to the default (max) value SCHED_CAPACITY_SCALE, Once all cpus
have the same arch_freq_scale value the scaling is meaningless.

Signed-off-by: Yair Podemsky <ypodemsk@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230110160206.75912-1-ypodemsk@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: core: Fix warning on RT kernels

[ Upstream commit 84ed64b1a7a7fcd507598dee7708c1f225123711 ]

Calling spin_lock_irqsave() does not disable the interrupts on realtime
kernels, remove the warning and replace assert_spin_locked() with
lockdep_assert_held().

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230110125310.55884-1-mlombard@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: mxs: suppress probe-deferral error message

[ Upstream commit 78a4471fa1a76a8bef4919105de67660a89a1e9b ]

During boot of I2SE Duckbill the kernel log contains a
confusing error:

  Failed to request dma

This is caused by i2c-mxs tries to request a not yet available DMA
channel (-EPROBE_DEFER). So suppress this message by using
dev_err_probe().

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU

[ Upstream commit 2ece0930ac5662bccce0ba4c59b84c98d2437200 ]

Add additional supported PCI IDs for latest AMD NAVI GPU card which
has an integrated Type-C controller and designware I2C with PCI
interface.

Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Tested-by: Sanath S <Sanath.S@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: modinst: Fix build error when CONFIG_MODULE_SIG_KEY is a PKCS#11 URI

[ Upstream commit 22e46f6480e83bcf49b6d5e6b66c81872c97a902 ]

When CONFIG_MODULE_SIG_KEY is PKCS#11 URI (pkcs11:*), signing of modules
fails:

  scripts/sign-file sha256 /.../linux/pkcs11:token=foo;object=bar;pin-value=1111 certs/signing_key.x509 /.../kernel/crypto/tcrypt.ko
  Usage: scripts/sign-file [-dp] <hash algo> <key> <x509> <module> [<dest>]
         scripts/sign-file -s <raw sig> <hash algo> <x509> <module> [<dest>]

First, we need to avoid adding the $(srctree)/ prefix to the URL.

Second, since the kconfig string values no longer include quotes, we need to add
them again when passing a PKCS#11 URI to sign-file. This avoids
splitting by the shell if the URI contains semicolons.

Fixes: 4db9c2e3d055 ("kbuild: stop using config_filename in scripts/Makefile.modsign")
Fixes: 129ab0d2d9f3 ("kbuild: do not quote string values in include/config/auto.conf")
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

certs: Fix build error when PKCS#11 URI contains semicolon

[ Upstream commit b1c3d2beed8ef3699fab106340e33a79052df116 ]

When CONFIG_MODULE_SIG_KEY is PKCS#11 URI (pkcs11:*) and contains a
semicolon, signing_key.x509 fails to build:

  certs/extract-cert pkcs11:token=foo;object=bar;pin-value=1111 certs/signing_key.x509
  Usage: extract-cert <source> <dest>

Add quotes to the extract-cert argument to avoid splitting by the shell.

This approach was suggested by Masahiro Yamada <masahiroy@kernel.org>.

Fixes: 129ab0d2d9f3 ("kbuild: do not quote string values in include/config/auto.conf")
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: sunplus: fix format string for printing resource

[ Upstream commit 08279468a294d8c996a657ecc9e51bd5c084c75d ]

On 32-bit architectures with 64-bit resource_size_t, sp_rtc_probe()
causes a compiler warning:

drivers/rtc/rtc-sunplus.c: In function 'sp_rtc_probe':
drivers/rtc/rtc-sunplus.c:243:33: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
  243 |         dev_dbg(&plat_dev->dev, "res = 0x%x, reg_base = 0x%lx\n",
      |                                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The best way to print a resource is the special %pR format string,
and similarly to print a pointer we can use %p and avoid the cast.

Fixes: fad6cbe9b2b4 ("rtc: Add driver for RTC in Sunplus SP7021")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230117172450.2938962-1-arnd@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi: fix potential NULL deref in efi_mem_reserve_persistent

[ Upstream commit 966d47e1f27c45507c5df82b2a2157e5a4fd3909 ]

When iterating on a linked list, a result of memremap is dereferenced
without checking it for NULL.

This patch adds a check that falls back on allocating a new page in
case memremap doesn't succeed.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 18df7577adae ("efi/memreserve: deal with memreserve entries in unmapped memory")
Signed-off-by: Anton Gusev <aagusev@ispras.ru>
[ardb: return -ENOMEM instead of breaking out of the loop]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: openvswitch: fix flow memory leak in ovs_flow_cmd_new

[ Upstream commit 0c598aed445eb45b0ee7ba405f7ece99ee349c30 ]

Syzkaller reports a memory leak of new_flow in ovs_flow_cmd_new() as it is
not freed when an allocation of a key fails.

BUG: memory leak
unreferenced object 0xffff888116668000 (size 632):
  comm "syz-executor231", pid 1090, jiffies 4294844701 (age 18.871s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000defa3494>] kmem_cache_zalloc include/linux/slab.h:654 [inline]
    [<00000000defa3494>] ovs_flow_alloc+0x19/0x180 net/openvswitch/flow_table.c:77
    [<00000000c67d8873>] ovs_flow_cmd_new+0x1de/0xd40 net/openvswitch/datapath.c:957
    [<0000000010a539a8>] genl_family_rcv_msg_doit+0x22d/0x330 net/netlink/genetlink.c:739
    [<00000000dff3302d>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
    [<00000000dff3302d>] genl_rcv_msg+0x328/0x590 net/netlink/genetlink.c:800
    [<000000000286dd87>] netlink_rcv_skb+0x153/0x430 net/netlink/af_netlink.c:2515
    [<0000000061fed410>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811
    [<000000009dc0f111>] netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
    [<000000009dc0f111>] netlink_unicast+0x545/0x7f0 net/netlink/af_netlink.c:1339
    [<000000004a5ee816>] netlink_sendmsg+0x8e7/0xde0 net/netlink/af_netlink.c:1934
    [<00000000482b476f>] sock_sendmsg_nosec net/socket.c:651 [inline]
    [<00000000482b476f>] sock_sendmsg+0x152/0x190 net/socket.c:671
    [<00000000698574ba>] ____sys_sendmsg+0x70a/0x870 net/socket.c:2356
    [<00000000d28d9e11>] ___sys_sendmsg+0xf3/0x170 net/socket.c:2410
    [<0000000083ba9120>] __sys_sendmsg+0xe5/0x1b0 net/socket.c:2439
    [<00000000c00628f8>] do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46
    [<000000004abfdcf4>] entry_SYSCALL_64_after_hwframe+0x61/0xc6

To fix this the patch rearranges the goto labels to reflect the order of
object allocations and adds appropriate goto statements on the error
paths.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 68bb10101e6b ("openvswitch: Fix flow lookup to use unmasked key")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230201210218.361970-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio-net: Keep stop() to follow mirror sequence of open()

[ Upstream commit 63b114042d8a9c02d9939889177c36dbdb17a588 ]

Cited commit in fixes tag frees rxq xdp info while RQ NAPI is
still enabled and packet processing may be ongoing.

Follow the mirror sequence of open() in the stop() callback.
This ensures that when rxq info is unregistered, no rx
packet processing is ongoing.

Fixes: 754b8a21a96d ("virtio_net: setup xdp_rxq_info")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20230202163516.12559-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking

[ Upstream commit 329c9cd769c2e306957df031efff656c40922c76 ]

The test tool can check that the zerocopy number of completions value is
valid taking into consideration the number of datagram send calls. This can
catch the system into a state where the datagrams are still in the system
(for example in a qdisk, waiting for the network interface to return a
completion notification, etc).

This change adds a retry logic of computing the number of completions up to
a configurable (via CLI) timeout (default: 2 seconds).

Fixes: 79ebc3c26010 ("net/udpgso_bench_tx: options to exercise TX CMSG")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-4-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs

[ Upstream commit dafe93b9ee21028d625dce347118b82659652eff ]

"udpgro_bench.sh" invokes udpgso_bench_rx/udpgso_bench_tx programs
subsequently and while doing so, there is a chance that the rx one is not
ready to accept socket connections. This racing bug could fail the test
with at least one of the following:

./udpgso_bench_tx: connect: Connection refused
./udpgso_bench_tx: sendmsg: Connection refused
./udpgso_bench_tx: write: Connection refused

This change addresses this by making udpgro_bench.sh wait for the rx
program to be ready before firing off the tx one - up to a 10s timeout.

Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-3-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: udpgso_bench_rx/tx: Stop when wrong CLI args are provided

[ Upstream commit db9b47ee9f5f375ab0c5daeb20321c75b4fa657d ]

Leaving unrecognized arguments buried in the output, can easily hide a
CLI/script typo. Avoid this by exiting when wrong arguments are provided to
the udpgso_bench test programs.

Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-2-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: udpgso_bench_rx: Fix 'used uninitialized' compiler warning

[ Upstream commit c03c80e3a03ffb4f790901d60797e9810539d946 ]

This change fixes the following compiler warning:

/usr/include/x86_64-linux-gnu/bits/error.h:40:5: warning: ‘gso_size’ may
be used uninitialized [-Wmaybe-uninitialized]
   40 |     __error_noreturn (__status, __errnum, __format,
   __va_arg_pack ());
         |
 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 udpgso_bench_rx.c: In function ‘main’:
 udpgso_bench_rx.c:253:23: note: ‘gso_size’ was declared here
   253 |         int ret, len, gso_size, budget = 256;

Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-1-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: libata: Fix sata_down_spd_limit() when no link speed is reported

[ Upstream commit 69f2c9346313ba3d3dfa4091ff99df26c67c9021 ]

Commit 2dc0b46b5ea3 ("libata: sata_down_spd_limit should return if
driver has not recorded sstatus speed") changed the behavior of
sata_down_spd_limit() to return doing nothing if a drive does not report
a current link speed, to avoid reducing the link speed to the lowest 1.5
Gbps speed.

However, the change assumed that a speed was recorded before probing
(e.g. before a suspend/resume) and set in link->sata_spd. This causes
problems with adapters/drives combination failing to establish a link
speed during probe autonegotiation. One example reported of this problem
is an mvebu adapter with a 3Gbps port-multiplier box: autonegotiation
fails, leaving no recorded link speed and no reported current link
speed. Probe retries also fail as no action is taken by sata_set_spd()
after each retry.

Fix this by returning early in sata_down_spd_limit() only if we do have
a recorded link speed, that is, if link->sata_spd is not 0. With this
fix, a failed probe not leading to a recorded link speed is retried at
the lower 1.5 Gbps speed, with the link speed potentially increased
later on the second revalidate of the device if the device reports
that it supports higher link speeds.

Reported-by: Marius Dinu <marius@psihoexpert.ro>
Fixes: 2dc0b46b5ea3 ("libata: sata_down_spd_limit should return if driver has not recorded sstatus speed")
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Marius Dinu <marius@psihoexpert.ro>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq

[ Upstream commit 1613fff7a32e1d9e2ac09db73feba0e71a188445 ]

If the a new ring layout is set, the max coalesced frames for RX and
TX are re-calculated, too. Add the missing assignment of the newly
calculated TX max coalesced frames.

Fixes: 656fc12ddaf8 ("can: mcp251xfd: add TX IRQ coalescing ethtool support")
Link: https://lore.kernel.org/all/20230130154334.1578518-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: raw: fix CAN FD frame transmissions over CAN XL devices

[ Upstream commit 3793301cbaa4a62d83e21f685307da7671f812ab ]

A CAN XL device is always capable to process CAN FD frames. The former
check when sending CAN FD frames relied on the existence of a CAN FD
device and did not check for a CAN XL device that would be correct
too.

With this patch the CAN FD feature is enabled automatically when CAN
XL is switched on - and CAN FD cannot be switch off while CAN XL is
enabled.

This precondition also leads to a clean up and reduction of checks in
the hot path in raw_rcv() and raw_sendmsg(). Some conditions are
reordered to handle simple checks first.

changes since v1: https://lore.kernel.org/all/20230131091012.50553-1-socketcan@hartkopp.net
- fixed typo: devive -> device
changes since v2: https://lore.kernel.org/all/20230131091824.51026-1-socketcan@hartkopp.net/
- reorder checks in if statements to handle simple checks first

Fixes: 626332696d75 ("can: raw: add CAN XL support")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230131105613.55228-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate

[ Upstream commit d0553680f94c49bbe0e39eb50d033ba563b4212d ]

The conclusion "j1939_session_deactivate() should be called with a
session ref-count of at least 2" is incorrect. In some concurrent
scenarios, j1939_session_deactivate can be called with the session
ref-count less than 2. But there is not any problem because it
will check the session active state before session putting in
j1939_session_deactivate_locked().

Here is the concurrent scenario of the problem reported by syzbot
and my reproduction log.

        cpu0                            cpu1
                                j1939_xtp_rx_eoma
j1939_xtp_rx_abort_one
                                j1939_session_get_by_addr [kref == 2]
j1939_session_get_by_addr [kref == 3]
j1939_session_deactivate [kref == 2]
j1939_session_put [kref == 1]
j1939_session_completed
j1939_session_deactivate
WARN_ON_ONCE(kref < 2)

=====================================================
WARNING: CPU: 1 PID: 21 at net/can/j1939/transport.c:1088 j1939_session_deactivate+0x5f/0x70
CPU: 1 PID: 21 Comm: ksoftirqd/1 Not tainted 5.14.0-rc7+ #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:j1939_session_deactivate+0x5f/0x70
Call Trace:
 j1939_session_deactivate_activate_next+0x11/0x28
 j1939_xtp_rx_eoma+0x12a/0x180
 j1939_tp_recv+0x4a2/0x510
 j1939_can_recv+0x226/0x380
 can_rcv_filter+0xf8/0x220
 can_receive+0x102/0x220
 ? process_backlog+0xf0/0x2c0
 can_rcv+0x53/0xf0
 __netif_receive_skb_one_core+0x67/0x90
 ? process_backlog+0x97/0x2c0
 __netif_receive_skb+0x22/0x80

Fixes: 0c71437dd50d ("can: j1939: j1939_session_deactivate(): clarify lifetime of session object")
Reported-by: syzbot+9981a614060dcee6eeca@syzkaller.appspotmail.com
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20210906094200.95868-1-william.xuanziyang@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Fix devlink unregister

[ Upstream commit 917d5e04d4dd2bbbf36fc6976ba442e284ccc42d ]

Exact match feature is only available in CN10K-B.
Unregister exact match devlink entry only for
this silicon variant.

Fixes: 87e4ea29b030 ("octeontx2-af: Debugsfs support for exact match.")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230131061659.1025137-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: return an error if the mac type is unknown in igc_ptp_systim_to_hwtstamp()

[ Upstream commit a2df8463e15c10a8a882090f3d7a760fdb7b189d ]

clang static analysis reports
drivers/net/ethernet/intel/igc/igc_ptp.c:673:3: warning: The left operand of
  '+' is a garbage value [core.UndefinedBinaryOperatorResult]
   ktime_add_ns(shhwtstamps.hwtstamp, adjust);
   ^            ~~~~~~~~~~~~~~~~~~~~

igc_ptp_systim_to_hwtstamp() silently returns without setting the hwtstamp
if the mac type is unknown.  This should be treated as an error.

Fixes: 81b055205e8b ("igc: Add support for RX timestamping")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230131215437.1528994-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: kprobe: Fixup kernel panic when probing an illegal position

[ Upstream commit 87f48c7ccc73afc78630530d9af51f458f58cab8 ]

The kernel would panic when probed for an illegal position. eg:

(CONFIG_RISCV_ISA_C=n)

echo 'p:hello kernel_clone+0x16 a0=%a0' >> kprobe_events
echo 1 > events/kprobes/hello/enable
cat trace

Kernel panic - not syncing: stack-protector: Kernel stack
is corrupted in: __do_sys_newfstatat+0xb8/0xb8
CPU: 0 PID: 111 Comm: sh Not tainted
6.2.0-rc1-00027-g2d398fe49a4d #490
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80007268>] dump_backtrace+0x38/0x48
[<ffffffff80c5e83c>] show_stack+0x50/0x68
[<ffffffff80c6da28>] dump_stack_lvl+0x60/0x84
[<ffffffff80c6da6c>] dump_stack+0x20/0x30
[<ffffffff80c5ecf4>] panic+0x160/0x374
[<ffffffff80c6db94>] generic_handle_arch_irq+0x0/0xa8
[<ffffffff802deeb0>] sys_newstat+0x0/0x30
[<ffffffff800158c0>] sys_clone+0x20/0x30
[<ffffffff800039e8>] ret_from_syscall+0x0/0x4
---[ end Kernel panic - not syncing: stack-protector:
Kernel stack is corrupted in: __do_sys_newfstatat+0xb8/0xb8 ]---

That is because the kprobe's ebreak instruction broke the kernel's
original code. The user should guarantee the correction of the probe
position, but it couldn't make the kernel panic.

This patch adds arch_check_kprobe in arch_prepare_kprobe to prevent an
illegal position (Such as the middle of an instruction).

Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230201040604.3390509-1-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ip/ip6_gre: Fix non-point-to-point tunnel not generating IPv6 link local address

[ Upstream commit 30e2291f61f93f7132c060190f8360df52644ec1 ]

We recently found that our non-point-to-point tunnels were not
generating any IPv6 link local address and instead generating an
IPv6 compat address, breaking IPv6 communication on the tunnel.

Previously, addrconf_gre_config always would call addrconf_addr_gen
and generate a EUI64 link local address for the tunnel.
Then commit e5dd729460ca changed the code path so that add_v4_addrs
is called but this only generates a compat IPv6 address for
non-point-to-point tunnels.

I assume the compat address is specifically for SIT tunnels so
have kept that only for SIT - GRE tunnels now always generate link
local addresses.

Fixes: e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address")
Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ip/ip6_gre: Fix changing addr gen mode not generating IPv6 link local address

[ Upstream commit 23ca0c2c93406bdb1150659e720bda1cec1fad04 ]

For our point-to-point GRE tunnels, they have IN6_ADDR_GEN_MODE_NONE
when they are created then we set IN6_ADDR_GEN_MODE_EUI64 when they
come up to generate the IPv6 link local address for the interface.
Recently we found that they were no longer generating IPv6 addresses.
This issue would also have affected SIT tunnels.

Commit e5dd729460ca changed the code path so that GRE tunnels
generate an IPv6 address based on the tunnel source address.
It also changed the code path so GRE tunnels don't call addrconf_addr_gen
in addrconf_dev_config which is called by addrconf_sysctl_addr_gen_mode
when the IN6_ADDR_GEN_MODE is changed.

This patch aims to fix this issue by moving the code in addrconf_notify
which calls the addr gen for GRE and SIT into a separate function
and calling it in the places that expect the IPv6 address to be
generated.

The previous addrconf_dev_config is renamed to addrconf_eth_config
since it only expected eth type interfaces and follows the
addrconf_gre/sit_config format.

A part of this changes means that the loopback address will be
attempted to be configured when changing addr_gen_mode for lo.
This should not be a problem because the address should exist anyway
and if does already exist then no error is produced.

Fixes: e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address")
Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: boe-tv101wum-nl6: Ensure DSI writes succeed during disable

[ Upstream commit a3ee9e0b57f8ecca02d1c16fad4941e09bfe2941 ]

The unprepare sequence has started to fail after moving to panel bridge
code in the msm drm driver (commit 007ac0262b0d ("drm/msm/dsi: switch to
DRM_PANEL_BRIDGE")). You'll see messages like this in the kernel logs:

   panel-boe-tv101wum-nl6 ae94000.dsi.0: failed to set panel off: -22

This is because boe_panel_enter_sleep_mode() needs an operating DSI link
to set the panel into sleep mode. Performing those writes in the
unprepare phase of bridge ops is too late, because the link has already
been torn down by the DSI controller in post_disable, i.e. the PHY has
been disabled, etc. See dsi_mgr_bridge_post_disable() for more details
on the DSI .

Split the unprepare function into a disable part and an unprepare part.
For now, just the DSI writes to enter sleep mode are put in the disable
function. This fixes the panel off routine and keeps the panel happy.

My Wormdingler has an integrated touchscreen that stops responding to
touch if the panel is only half disabled too. This patch fixes it. And
finally, this saves power when the screen is off because without this
fix the regulators for the panel are left enabled when nothing is being
displayed on the screen.

Fixes: 007ac0262b0d ("drm/msm/dsi: switch to DRM_PANEL_BRIDGE")
Fixes: a869b9db7adf ("drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel")
Cc: yangcong <yangcong5@huaqin.corp-partner.google.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Jitao Shi <jitao.shi@mediatek.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230106030108.2542081-1-swboyd@chromium.org
(cherry picked from commit c913cd5489930abbb557ef144a333846286754c3)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: meson-gxl: Add generic dummy stubs for MMD register access

[ Upstream commit afc2336f89dc0fc0ef25b92366814524b0fd90fb ]

The Meson G12A Internal PHY does not support standard IEEE MMD extended
register access, therefore add generic dummy stubs to fail the read and
write MMD calls. This is necessary to prevent the core PHY code from
erroneously believing that EEE is supported by this PHY even though this
PHY does not support EEE, as MMD register access returns all FFFFs.

Fixes: 5c3407abb338 ("net: phy: meson-gxl: add g12a support")
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Chris Healy <healych@amazon.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20230130231402.471493-1-cphealy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: do not check hb_timer.expires when resetting hb_timer

[ Upstream commit 8f35ae17ef565a605de5f409e04bcd49a55d7646 ]

It tries to avoid the frequently hb_timer refresh in commit ba6f5e33bdbb
("sctp: avoid refreshing heartbeat timer too often"), and it only allows
mod_timer when the new expires is after hb_timer.expires. It means even
a much shorter interval for hb timer gets applied, it will have to wait
until the current hb timer to time out.

In sctp_do_8_2_transport_strike(), when a transport enters PF state, it
expects to update the hb timer to resend a heartbeat every rto after
calling sctp_transport_reset_hb_timer(), which will not work as the
change mentioned above.

The frequently hb_timer refresh was caused by sctp_transport_reset_timers()
called in sctp_outq_flush() and it was already removed in the commit above.
So we don't have to check hb_timer.expires when resetting hb_timer as it is
now not called very often.

Fixes: ba6f5e33bdbb ("sctp: avoid refreshing heartbeat timer too often")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/d958c06985713ec84049a2d5664879802710179a.1675095933.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

maple_tree: should get pivots boundary by type

[ Upstream commit ab6ef70a8b0d314c2160af70b0de984664d675e0 ]

We should get pivots boundary by type.  Fixes a potential overindexing of
mt_pivots[].

Link: https://lkml.kernel.org/r/20221112234308.23823-1-richard.weiyang@gmail.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

squashfs: harden sanity check in squashfs_read_xattr_id_table

[ Upstream commit 72e544b1b28325fe78a4687b980871a7e4101f76 ]

While mounting a corrupted filesystem, a signed integer '*xattr_ids' can
become less than zero.  This leads to the incorrect computation of 'len'
and 'indexes' values which can cause null-ptr-deref in copy_bio_to_actor()
or out-of-bounds accesses in the next sanity checks inside
squashfs_read_xattr_id_table().

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Link: https://lkml.kernel.org/r/20230117105226.329303-2-pchelkin@ispras.ru
Fixes: 506220d2ba21 ("squashfs: add more sanity checks in xattr id lookup")
Reported-by: <syzbot+082fa4af80a5bb1a9843@syzkaller.appspotmail.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: fix kunit_test_init_section_suites(...)

[ Upstream commit 254c71374a70051a043676b67ba4f7ad392b5fe6 ]

Looks like kunit_test_init_section_suites(...) was messed up in a merge
conflict. This fixes it.

kunit_test_init_section_suites(...) was not updated to avoid the extra
level of indirection when .kunit_test_suites was flattened. Given no-one
was actively using it, this went unnoticed for a long period of time.

Fixes: e5857d396f35 ("kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites")
Signed-off-by: Brendan Higgins <brendan.higgins@linux.dev>
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Martin Fernandez <martin.fernandez@eclypsium.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: ublk: extending queue_size to fix overflow

[ Upstream commit 29baef789c838bd5c02f50c88adbbc6b955aaf61 ]

When validating drafted SPDK ublk target, in a case that
assigning large queue depth to multiqueue ublk device,
ublk target would run into a weird incorrect state. During
rounds of review and debug, An overflow bug was found
in ublk driver.

In ublk_cmd.h, UBLK_MAX_QUEUE_DEPTH is 4096 which means
each ublk queue depth can be set as large as 4096. But
when setting qd for a ublk device,
sizeof(struct ublk_queue) + depth * sizeof(struct ublk_io)
will be larger than 65535 if qd is larger than 2728.
Then queue_size is overflowed, and ublk_get_queue()
references a wrong pointer position. The wrong content of
ublk_queue elements will lead to out-of-bounds memory
access.

Extend queue_size in ublk_device as "unsigned int".

Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230131070552.115067-1-xiaodong.liu@intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: br_netfilter: disable sabotage_in hook after first suppression

[ Upstream commit 2b272bb558f1d3a5aa95ed8a82253786fd1a48ba ]

When using a xfrm interface in a bridged setup (the outgoing device is
bridged), the incoming packets in the xfrm interface are only tracked
in the outgoing direction.

$ brctl show
bridge name     interfaces
br_eth1         eth1

$ conntrack -L
tcp 115 SYN_SENT src=192... dst=192... [UNREPLIED] ...

If br_netfilter is enabled, the first (encrypted) packet is received onR
eth1, conntrack hooks are called from br_netfilter emulation which
allocates nf_bridge info for this skb.

If the packet is for local machine, skb gets passed up the ip stack.
The skb passes through ip prerouting a second time. br_netfilter
ip_sabotage_in supresses the re-invocation of the hooks.

After this, skb gets decrypted in xfrm layer and appears in
network stack a second time (after decryption).

Then, ip_sabotage_in is called again and suppresses netfilter
hook invocation, even though the bridge layer never called them
for the plaintext incarnation of the packet.

Free the bridge info after the first suppression to avoid this.

I was unable to figure out where the regression comes from, as far as i
can see br_netfilter always had this problem; i did not expect that skb
is looped again with different headers.

Fixes: c4b0e771f906 ("netfilter: avoid using skb->nf_bridge directly")
Reported-and-tested-by: Wolfgang Nothdurft <wolfgang@linogate.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: firewire-motu: fix unreleased lock warning in hwdep device

[ Upstream commit c7a806d9ce6757ff56078674916e53bd859f242d ]

Smatch static analysis tool detects that acquired lock is not released
in hwdep device when condition branch is passed due to no event. It is
unlikely to occur, while fulfilling is preferable for better coding.

Reported-by: Dan Carpenter <error27@gmail.com>
Fixes: 634ec0b2906e ("ALSA: firewire-motu: notify event for parameter change in register DSP model")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230130141540.102854-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>