mt76: mt76x0: Move tables used only by init.c to their own header file

Taking the same approach as initvals_phy.h.

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:218:35: warning: ‘mt76x0_dcoc_tab’ defined but not used [-Wunused-const-variable=]
 218 | static const struct mt76_reg_pair mt76x0_dcoc_tab[] = {
 | ^~~~~~~~~~~~~~~
 drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:86:35: warning: ‘mt76x0_bbp_init_tab’ defined but not used [-Wunused-const-variable=]
 86 | static const struct mt76_reg_pair mt76x0_bbp_init_tab[] = {
 | ^~~~~~~~~~~~~~~~~~~
 drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:48:35: warning: ‘mt76x0_mac_reg_table’ defined but not used [-Wunused-const-variable=]
 48 | static const struct mt76_reg_pair mt76x0_mac_reg_table[] = {
 | ^~~~~~~~~~~~~~~~~~~~
 drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:14:35: warning: ‘common_mac_reg_table’ defined but not used [-Wunused-const-variable=]
 14 | static const struct mt76_reg_pair common_mac_reg_table[] = {
 | ^~~~~~~~~~~~~~~~~~~~

Cc: Felix Fietkau <nbd@nbd.name>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: unlock dfs bands

Unlock dfs channels for mt7615 devices since the driver supports
radar detection. Dfs pattern detector has been tested successfully by
mt7615 users.
Do not unlock DFS frequencies for mt7663 devices since it has not been
tested yet.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663: check isr read return value in mt7663s_rx_work

In order to avoid using stale isr values, check return value from
sdio_readsb() in mt7663s_rx_work()

Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663s: introduce sdio tx aggregation

Introduce sdio tx aggregation to reduce bus transaction ands improve tx
throughput. For the moment the skb are copied in a dedicated buffer
since mmc APIs do not support sg table for zero-copy.
Since skb data are already copied in xmit_buff[], avoid linearization in
ma80211 layer. Relying on tx aggregation, we improve tx tpt of ~65%.

Tested-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663s: fix possible quota leak in mt7663s_refill_sched_quota

Look just at reported quota since the hw sporadically reports mcu tx
quota without setting WHIER_TX_DONE_INT_EN bit

Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move pad estimation out of mt76_skb_adjust_pad

Move frame pad computation out of mt76_skb_adjust_pad routine.
This is a preliminary patch to introduce sdio tx aggregation.

Tested-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663s: introduce __mt7663s_xmit_queue routine

This is a preliminary patch to introduce sdio tx aggregation

Tested-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663s: split mt7663s_tx_update_sched in mt7663s_tx_{pick,update}_quota

In order to not update the available quota in case of a tx error, split
mt7663s_tx_update_sched in mt7663s_tx_{pick,update}_quota routines

Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663s: do not use altx for ctl/mgmt traffic

Since the sdio engine does not report quota for altx queue, move
ctl/mgmt traffic to standard data queues

Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7622: fix fw hang on mt7622

Set poll timeout to 3s for mt7622 devices in order to avoid fw hangs.
Swap mt7622_trigger_hif_int and doorbell configuration order in
mt7615_mcu_drv_pmctrl routine.
Introduce mt7615_mcu_lp_drv_pmctrl routine to take care of drv_own
configuration for runtime-pm.

Fixes: 08523a2a1db5 ("mt76: mt7615: add mt7615_pm_wake utility routine")
Fixes: 894b7767ec2f ("mt76: mt7615: improve mt7615_driver_own reliability")
Fixes: 757b0e7fd6f4 ("mt76: mt7615: avoid polling in fw_own for mt7663")
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: fix VHT LDPC capability

The MCU field should contain a boolean 0/1, not the flag itself.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: Remove set but unused variable 'index'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/wireless/mediatek/mt76/mt7615/testmode.c: In function mt7615_tm_set_tx_power
drivers/net/wireless/mediatek/mt76/mt7615/testmode.c:83:7: warning: variable ‘index’ set but not used [-Wunused-but-set-variable]=

commit 4f0bce1c8888 ("mt76: mt7615: implement testmode support")
involved this unused variable, remove it.

Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: remove retry_q from struct mt76_txq and related code

Since the switch to using AQL by default, mtxq->retry_q is never filled anymore
Remove it to get rid of a few more unnecessary cycles in the tx path

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move txwi handling code to dma.c, since it is mmio specific

This way we can make some functions static

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix queue/tid mapping for airtime reporting

Unlike 7615, 7915 uses the same AC index for rx and tx, which matches the
LMAC queue mapping

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: simplify mt7915_lmac_mapping

Compared to mac80211 ACs, MT7915 queue numbers are in reverse order
There is no need for the defensive WARN_ON_ONCE, so we can simplify
the function to avoid the array lookup

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: dma: cache dma map address/len in struct mt76_queue_entry

Accessing them from uncached memory can be expensive, so it's cheaper to
cache them

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix HE BSS info

he_pe_duration and he_rts_thres have the same unit as the fields in the HE
operation IE

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: convert from tx tasklet to tx worker thread

This improves performance by allowing the scheduler to move the tx scheduling
work to idle CPUs. Since tx scheduling work is very latency sensitive and
kept short via AQL, sched_set_fifo_low is used to keep worker priority above
normal tasks

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: add utility functions for deferring work to a kernel thread

In order to avoid keeping work like tx scheduling pinned to the CPU it was
scheduled from, it makes sense to switch from tasklets to kernel threads.

Unlike a workqueue, this one only allows one fixed worker function to be
executed by the worker thread. Because of that, there is less locking
and less code for scheduling involved.
This is important because the tx worker is scheduled often in a hot path

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: testmode: add a limit for queued tx_frames packets

This avoids running out of available tx tokens

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: fix antenna selection for testmode tx_frames

Do not alter the tx/rx chain settings during channel setup, antennas are
remapped by the testmode specific register writes already

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: fix MT_ANT_SWITCH_CON register definition

This is used for testmode tx antenna selection

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix unexpected firmware mode

Avoid firmware falling into spectrum mode since that will set
unexpected PSE/PLE thresholds which lead to Tx hang.

This mode should be cleaned before firmware download stage.

Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x02: tune tx ring size

Increase data queue size to improve performance.
Reduce PS/mgmt queue size

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7603: tune tx ring size

Stop relying on global tx ring size, reduce size for PS/mgmt queue

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: remove struct mt76_sw_queue

All members except for the struct mt76_queue pointer have been removed

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: rely on AQL for burst size limits on tx queueing

Now that AQL works well on all mt76 drivers, completely replace the arbitrary
burst sizing and number of bursts logic for tx scheduling.
For the short period of time in which AQL does not work well yet, limit each
stations to 16 in-flight packets that have no estimated tx time.
This should avoid filling the queue if a station connects and queues up a
large number of packets before rate control information is available, especially
with hardware rate control

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: remove swq from struct mt76_sw_queue

Since txq selection was moved to mac80211, it is no longer used

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: remove qid argument to drv->tx_complete_skb

It is not needed

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: unify queue tx cleanup code

Cleanup and preparation for changing tx scheduling behavior

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: sdio: fix use of q->head and q->tail

Their use is reversed compared to DMA. The order for DMA makes more sense,
so let's use that

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: usb: fix use of q->head and q->tail

Their use is reversed compared to DMA. The order for DMA makes more sense,
so let's use that

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7603: check for single-stream EEPROM configuration

Some devices using MT7628 or MT7603 have only one antenna chain connected.
Detect these using the EEPROM rx/tx path settings

Reported-by: Qin Wei <me@vonger.cn>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: add memory barrier to DMA queue kick

Ensure that descriptor memory has been fully written before letting the
hardware read it

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add support for accessing mapped registers via bus ops

Makes it possible to read/write them via debugfs, similar to mt7615/7603

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: significantly reduce interrupt load

On 7615 and newer, DMA completion only triggers unmap, but not free of queued
skbs, since pointers to packets are queued internally.
Because of that, there is no need to process the main data queue immediately
on DMA completion.
To improve performance, mask out the DMA data queue completion interrupt and
process the queue only when we receive a txfree event.
This brings the number of interrupts under load down to a small fraction.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: significantly reduce interrupt load

On 7615 and newer, DMA completion only triggers unmap, but not free of queued
skbs, since pointers to packets are queued internally.
Because of that, there is no need to process the main data queue immediately
on DMA completion.
To improve performance, mask out the DMA data queue completion interrupt and
process the queue only when we receive a txfree event.
This brings the number of interrupts under load down to a small fraction.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: schedule tx tasklet in mt7915_mac_tx_free

The previous scheduling round may have been limited by AQL.
More frames might be available after the tx free run.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: dma: update q->queued immediately on cleanup

Tx cleanup and tx enqueuing can run in parallel. In order to avoid queue
starvation issues under load, update q->queued immediately.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: optimize mt7915_mac_sta_poll

Since DMA completion does not imply tx completion, it makes more sense to
poll for airtime from mt7915_mac_tx_free.
Reduce the runtime of the function by moving all items from dev->sta_poll_list
to a local list once and process any stations that were added afterwards
on the next run

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: fix reading airtime statistics

- change the WTBL LMAC access function to set the mapping window only once
- use ac * 2 as offset, since each AC has separate words for rx and tx

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663u: fix dma header initialization

Fix length field corruption in usb dma header introduced adding sdio
support

Fixes: 75b10f0cbd0b ("mt76: mt76u: add mt76_skb_adjust_pad utility routine")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: fix a possible NULL pointer dereference in mt76_testmode_dump

Fix a possible NULL pointer dereference in mt76_testmode_dump() since
nla_nest_start returns NULL in case of error

Fixes: f0efa8621550e ("mt76: add API for testmode support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: fix a possible NULL pointer dereference in mt7615_pm_wake_work

Initialize wcid to global_wcid if msta is NULL in mt7615_pm_wake_work
routine since wcid will be dereferenced running mt76_tx()

Fixes: 2b8cdfb28d340 ("mt76: mt7615: wake device before pushing frames in mt7615_tx")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: fix possible memory leak in mt7615_tm_set_tx_power

Fix a memory leak in mt7615_tm_set_tx_power routine if
mt7615_eeprom_get_target_power_index fails.
Moreover do not account req_header twice in mcu skb allocation.

Fixes: 4f0bce1c88882 ("mt76: mt7615: implement testmode support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663s: fix unable to handle kernel paging request

Use buffer allocated with kmalloc instead of with stack to fix kernel
crash due to Unable to handle kernel paging request at virtual address
ffffffc0095cbce8.

[  156.977349] Unable to handle kernel paging request at virtual address ffffffc0095cbce8
[  156.985270] Mem abort info:
[  156.988059]   ESR = 0x96000045
[  156.991104]   Exception class = DABT (current EL), IL = 32 bits
[  156.997013]   SET = 0, FnV = 0
[  157.000057]   EA = 0, S1PTW = 0
[  157.003190] Data abort info:
[  157.006061]   ISV = 0, ISS = 0x00000045
[  157.009887]   CM = 0, WnR = 1
[  157.012850] swapper pgtable: 4k pages, 39-bit VAs, pgdp = 0000000042adcba2
[  157.019715] [ffffffc0095cbce8] pgd=0000000000000000, pud=0000000000000000
[  157.026499] Internal error: Oops: 96000045 [#1] PREEMPT SMP
[  157.032065] Modules linked in: mt7663s mt7663_usb_sdio_common mt7615_common

...

[  157.073007] Process CompositorTileW (pid: 1625, stack limit = 0x000000003f2389fc)
[  157.080484] CPU: 0 PID: 1625 Comm: CompositorTileW Not tainted 4.19.137 #36
[  157.092219] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[  157.097012] pc : __memcpy+0xc0/0x180
[  157.100585] lr : swiotlb_tbl_unmap_single+0x84/0x14c
[  157.105540] sp : ffffff8008003cb0
[  157.108845] x29: ffffff8008003cb0 x28: ffffff9c1a211f60
[  157.114149] x27: ffffff9c19ecc018 x26: 0000000000001000
[  157.119452] x25: ffffff9c1a378000 x24: 0000000000000001
[  157.124755] x23: ffffff9c1a378000 x22: 00000000000001ff
[  157.130058] x21: 0000000000000000 x20: 00000000fbefe800
[  157.135360] x19: 0000000000000070 x18: 0000000000000000
[  157.140663] x17: 0000000000000000 x16: 0000000000000000
[  157.145965] x15: 0000000000000000 x14: 0000000000000000
[  157.151267] x13: 0000000000000000 x12: 000000000000000d
[  157.156569] x11: 000000000000000c x10: 0000000a7befe800
[  157.161873] x9 : fffffff680000000 x8 : 0000000000000000
[  157.167175] x7 : 0000000100000003 x6 : ffffffc0095cbce8
[  157.172479] x5 : 0000000000000000 x4 : 0000000000000000
[  157.177781] x3 : 0000000000000002 x2 : fffffffffffffff0
[  157.183085] x1 : ffffffca7befe810 x0 : ffffffc0095cbce8
[  157.188389] Call trace:
[  157.190832]  __memcpy+0xc0/0x180
[  157.194053]  swiotlb_unmap_sg_attrs+0xa8/0xb0
[  157.198406]  __swiotlb_unmap_sg_attrs+0x8c/0xa4
[  157.202931]  msdc_unprepare_data+0x6c/0x84
[  157.207019]  msdc_request_done+0x58/0x98
[  157.210934]  msdc_data_xfer_done+0x1a8/0x1d0
[  157.215195]  msdc_irq+0x12c/0x17c
[  157.218505]  __handle_irq_event_percpu+0xd8/0x298
[  157.223202]  handle_irq_event+0x60/0xdc
[  157.227031]  handle_fasteoi_irq+0xa4/0x1d4
[  157.231120]  __handle_domain_irq+0x84/0xc4
[  157.235210]  gic_handle_irq+0x124/0x1a4
[  157.239038]  el0_irq_naked+0x4c/0x54
[  157.242608] Code: 14000028 f1020042 5400024a a8c12027 (a88120c7)
[  157.248693] ---[ end trace 28b8090135b0a2e1 ]---
[  157.265589] Kernel panic - not syncing: Fatal exception in interrupt
[  157.271944] SMP: stopping secondary CPUs
[  157.275865] Kernel Offset: 0x1c10e00000 from 0xffffff8008000000
[  157.281779] CPU features: 0x0,2188200c
[  157.285519] Memory Limit: none

Fixes: a66cbdd6573d ("mt76: mt7615: introduce mt7663s support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663s: fix resume failure

MT7663s have to rely on MMC_PM_KEEP_POWER in pm_flags for to avoid SDIO
power is being shut off.

To fix sdio access failure like "mt7663s mmc1:0001:1: sdio write failed:
-22" for the first sdio command to access the bus in the resume handler.

Fixes: a66cbdd6573d ("mt76: mt7615: introduce mt7663s support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663s: use NULL instead of 0 in sdio code

Fix the following sparse warnings in mt7663s driver:

drivers/net/wireless/mediatek/mt76/mt7615/sdio_mcu.c:78:62: warning:
Using plain integer as NULL pointer
drivers/net/wireless/mediatek/mt76/mt7615/sdio_mcu.c:110:62: warning:
Using plain integer as NULL pointer
drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c:229:64: warning:
Using plain integer as NULL pointer
drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c:263:64: warning:
Using plain integer as NULL pointer

Fixes: a66cbdd6573d ("mt76: mt7615: introduce mt7663s support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: release mutex in mt7615_reset_test_set

Reduce scope of mutex_acquire/mutex_release in mt7615_reset_test_set
routine in order to fix the following static checker warning:

drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c:179
mt7615_reset_test_set()
warn: inconsistent returns 'dev->mt76.mutex'.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: ea4906c4be49 ("mt76: mt7615: wake device before accessing regmap in debugfs")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add Tx A-MSDU offloading support

This disables the software A-MSDU aggregation in mac80211 and enables hardware
offloading

Suggested-by: Yiwei Chung <yiwei.chung@mediatek.com>
Suggested-by: YF Luo <yf.luo@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Co-developed-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add missing flags in WMM parameter settings

Indicate the filled parameter to the firmware

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: simplify aggregation session check

Use the txwi data as primary source information to avoid touching skb data
Use bitfield instead of state variable + spinlock

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: remove mtxq->agg_ssn assignment

It is not used anywhere for this driver

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move mt76_check_agg_ssn to driver tx_prepare calls

mt7615 and newer drivers do not need this, since they use sequence number offload
Moving this code also reduces the number of callsites to make it easier to review

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: enable offloading of sequence number assignment

Preparation for supporting more offload features

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: increase tx retry count

Set it to 15 to match reference driver

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: clean up station stats polling and rate control update

Queueing a per-sta work item from the tx free path can become very expensive
under load. This work is only supposed to pull rate control stats every
second and deal with rate control changes.

Additionally, the rate control update code was wrong, because it was
confusing bit masks and bit numbers in test_bit.

Fix this by introducing a dedicated device work item for rate control
updates, and by polling station stats from the phy mac work.
Stations requiring polling or rate control updates are added to lists
protected by dev->sta_poll_lock.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: do not do any work in napi poll after calling napi_complete_done()

Fixes a race condition where multiple tx cleanup or sta poll tasks could run
in parallel.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: do not do any work in napi poll after calling napi_complete_done()

Fixes a race condition where multiple tx cleanup tasks could run in parallel

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x02: clean up and fix interrupt masking in the irq handler

Only clear unmasked interrupts. If an interrupt is temporarily masked,
its pending events need to be processed later, even if another interrupt
happened in the mean time.
Disable interrupts in one call before scheduling

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: only clear unmasked interrupts in irq tasklet

If an interrupt is temporarily masked, its pending events need to be processed
later, even if another interrupt happened in the mean time.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: clean up and fix interrupt masking in the irq handler

Only clear unmasked interrupts. If an interrupt is temporarily masked,
its pending events need to be processed later, even if another interrupt
happened in the mean time.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: set interrupt mask register to 0 before requesting irq

Avoids spurious interrupts in case the hardware was running already

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: fix double DMA unmap of the first buffer on 7615/7915

A small part of the first skb buffer is passed to the firmware for parsing
via DMA, while the full buffer is passed as part of the TXP.

Avoid calling DMA unmap on the first part (with a different length than map)

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix crash on tx rate report for invalid stations

Check wcid RCU pointer before using it

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: enable U-APSD on AP side

Enable U-APSD support for AP interface.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76s: get rid of unused variable

Remove unused state variable in mt76_sdio structure

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76s: move tx/rx processing in 2 separate works

In order to maximize parallelism, split status work in tx status work
and rx net work

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76s: move status processing in txrx wq

As it has been done for tx and rx processing, move tx/rx status
processing into mt76s_txrx_wq workqueue

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663s: move rx processing in txrx wq

Move rx processing to mt76s_txrx_wq in order to minimize the interval when
the sdio bus is locked during rx

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76s: move tx processing in a dedicated wq

Introduce mt76s_txrx_wq workqueue and move tx processing from kthread to
a dedicated work. This is preliminary patch to improve mt7663s throughput

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76s: fix oom in mt76s_tx_queue_skb_raw

Free the mcu skb in case of error in mt76s_tx_queue_skb_raw routine

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: reschedule runtime-pm receiving a tx interrupt

Reschedule runtime-pm after receiving a tx interrupt.
Update runtime-pm last activity before injecting packets

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: do not inject packets if MT76_STATE_PM is set

Do not tx packets in mt76_txq_send_burst() or mt76_txq_schedule_list()
if the device is in runtime-pm

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: hold mt76 lock queueing wd in mt7615_queue_key_update

wq queue is always updated holding mt76 spinlock. Grab mt76 lock in
mt7615_queue_key_update() before putting a new element at the end of the
queue.

Fixes: eb99cc95c3b65 ("mt76: mt7615: introduce mt7663u support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663s: move drv_own/fw_own in mt7615_mcu_ops

Initialize set_drv_ctrl and set_fw_ctrl function pointers in
mt7663s_mcu_init. This is a preliminary patch to enable runtime-pm for
mt7663s chipset.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: move drv_own/fw_own in mt7615_mcu_ops

Introduce set_drv_ctrl and set_fw_ctrl function pointers in
mt7615_mcu_ops data structure. This is a preliminary patch to enable
runtime-pm for non-pci chipsets

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: register ext_phy if DBDC is detected

MT_EE_WIFI_CONF field can be used to detect if the chipset is MT7615D.
Thus, add support to automatically register ext_phy if DBDC is detected.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

zd1201: simplify the return expression of zd1201_set_maxassoc()

Simplify the return expression.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200921131115.93504-1-miaoqinglang@huawei.com

rtw88: Fix potential probe error handling race with wow firmware loading

If rtw_core_init() fails to load the wow firmware, rtw_core_deinit()
will not get called to clean up the regular firmware.

Ensure that an error loading the wow firmware does not produce an oops
for the regular firmware by waiting on its completion to be signalled
before returning. Also release the loaded firmware.

Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported")
Cc: Chin-Yen Lee <timlee@realtek.com>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200920132621.26468-3-afaerber@suse.de

rtw88: Fix probe error handling race with firmware loading

In case of rtw8822be, a probe failure after successful rtw_core_init()
has been observed to occasionally lead to an oops from rtw_load_firmware_cb():

[    3.924268] pci 0001:01:00.0: [10ec:b822] type 00 class 0xff0000
[    3.930531] pci 0001:01:00.0: reg 0x10: [io  0x0000-0x00ff]
[    3.936360] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
[    3.944042] pci 0001:01:00.0: supports D1 D2
[    3.948438] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.957312] pci 0001:01:00.0: BAR 2: no space for [mem size 0x00010000 64bit]
[    3.964645] pci 0001:01:00.0: BAR 2: failed to assign [mem size 0x00010000 64bit]
[    3.972332] pci 0001:01:00.0: BAR 0: assigned [io  0x10000-0x100ff]
[    3.986240] rtw_8822be 0001:01:00.0: enabling device (0000 -> 0001)
[    3.992735] rtw_8822be 0001:01:00.0: failed to map pci memory
[    3.998638] rtw_8822be 0001:01:00.0: failed to request pci io region
[    4.005166] rtw_8822be 0001:01:00.0: failed to setup pci resources
[    4.011580] rtw_8822be: probe of 0001:01:00.0 failed with error -12
[    4.018827] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.029121] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.050828] Unable to handle kernel paging request at virtual address edafeaac9607952c
[    4.058975] Mem abort info:
[    4.058980]   ESR = 0x96000004
[    4.058990]   EC = 0x25: DABT (current EL), IL = 32 bits
[    4.070353]   SET = 0, FnV = 0
[    4.073487]   EA = 0, S1PTW = 0
[    4.073501] dw-apb-uart 98007800.serial: forbid DMA for kernel console
[    4.076723] Data abort info:
[    4.086415]   ISV = 0, ISS = 0x00000004
[    4.087731] Freeing unused kernel memory: 1792K
[    4.090391]   CM = 0, WnR = 0
[    4.098091] [edafeaac9607952c] address between user and kernel address ranges
[    4.105418] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    4.111129] Modules linked in:
[    4.114275] CPU: 1 PID: 31 Comm: kworker/1:1 Not tainted 5.9.0-rc5-next-20200915+ #700
[    4.122386] Hardware name: Realtek Saola EVB (DT)
[    4.127223] Workqueue: events request_firmware_work_func
[    4.132676] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
[    4.138393] pc : rtw_load_firmware_cb+0x54/0xbc
[    4.143040] lr : request_firmware_work_func+0x44/0xb4
[    4.148217] sp : ffff800010133d70
[    4.151616] x29: ffff800010133d70 x28: 0000000000000000
[    4.157069] x27: 0000000000000000 x26: 0000000000000000
[    4.162520] x25: 0000000000000000 x24: 0000000000000000
[    4.167971] x23: ffff00007ac21908 x22: ffff00007ebb2100
[    4.173424] x21: ffff00007ad35880 x20: edafeaac96079504
[    4.178877] x19: ffff00007ad35870 x18: 0000000000000000
[    4.184328] x17: 00000000000044d8 x16: 0000000000004310
[    4.189780] x15: 0000000000000800 x14: 00000000ef006305
[    4.195231] x13: ffffffff00000000 x12: ffffffffffffffff
[    4.200682] x11: 0000000000000020 x10: 0000000000000003
[    4.206135] x9 : 0000000000000000 x8 : ffff00007e73f680
[    4.211585] x7 : 0000000000000000 x6 : ffff80001119b588
[    4.217036] x5 : ffff00007e649c80 x4 : ffff00007e649c80
[    4.222487] x3 : ffff80001119b588 x2 : ffff8000108d1718
[    4.227940] x1 : ffff800011bd5000 x0 : ffff00007ac21600
[    4.233391] Call trace:
[    4.235906]  rtw_load_firmware_cb+0x54/0xbc
[    4.240198]  request_firmware_work_func+0x44/0xb4
[    4.245027]  process_one_work+0x178/0x1e4
[    4.249142]  worker_thread+0x1d0/0x268
[    4.252989]  kthread+0xe8/0xf8
[    4.256127]  ret_from_fork+0x10/0x18
[    4.259800] Code: f94013f5 a8c37bfd d65f03c0 f9000260 (f9401681)
[    4.266049] ---[ end trace f822ebae1a8545c2 ]---

To avoid this, wait on the completion callbacks in rtw_core_deinit()
before releasing firmware and continuing teardown.

Note that rtw_wait_firmware_completion() was introduced with
c8e5695eae9959fc5774c0f490f2450be8bad3de ("rtw88: load wowlan firmware
if wowlan is supported"), so backports to earlier branches may need to
inline wait_for_completion(&rtwdev->fw.completion) instead.

Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported")
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200920132621.26468-2-afaerber@suse.de

brcmfmac: check return value of driver_for_each_device()

Fixes the following W=1 kernel build warning(s):

drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c:1576:6: warning:
 variable 'ret' set but not used [-Wunused-but-set-variable]
  1576 |  int ret;
       |      ^~~

driver_for_each_device() has been declared with __must_check, so the
return value should be checked.

Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1600481191-14250-1-git-send-email-zhangchangzhong@huawei.com

rtlwifi: rtl8723be: use true,false for bool variable large_cfo_hit

This addresses the following coccinelle warning:

drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c:1155:27-47: WARNING:
Comparison of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c:1156:3-23: WARNING:
Assignment of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c:1159:3-23: WARNING:
Assignment of 0/1 to bool variable

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200919074437.3459305-1-yanaijie@huawei.com

rtlwifi: rtl8821ae: use true,false for bool variable large_cfo_hit

This addresses the following coccinelle warning:

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2680:27-47: WARNING:
Comparison of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2683:3-23: WARNING:
Assignment of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2686:3-23: WARNING:
Assignment of 0/1 to bool variable

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200919074428.3459234-1-yanaijie@huawei.com

rtlwifi: rtl8192ee: use true,false for bool variable large_cfo_hit

This addresses the following coccinelle warning:

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:721:27-47:
WARNING: Comparison of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:722:3-23: WARNING:
Assignment of 0/1 to bool variable
drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:725:2-22: WARNING:
Assignment of 0/1 to bool variable

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200919074412.3459163-1-yanaijie@huawei.com

rtlwifi: Use ffs in <foo>_phy_calculate_bit_shift

Remove the loop and use the generic ffs instead.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/e2ab424d24b74901bc0c39f0c60f75e871adf2ba.camel@perches.com

mt7601u: Convert to DEFINE_SHOW_ATTRIBUTE

Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200919024838.14172-1-miaoqinglang@huawei.com

wlcore: Remove unused function no_write_handler()

There is no caller in tree, so can remove it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918131305.20976-1-yuehaibing@huawei.com

rtlwifi: rtl8723be: fix comparison to bool warning in hw.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c:861:6-35: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-10-zhengbin13@huawei.com

rtlwifi: rtl8192de: fix comparison to bool warning in hw.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:566:14-20: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:572:13-19: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:581:14-20: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:587:13-19: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-9-zhengbin13@huawei.com

rtlwifi: rtl8192ce: fix comparison to bool warning in hw.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c:616:14-20: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c:621:13-19: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c:626:14-20: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c:631:13-19: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-8-zhengbin13@huawei.com

rtlwifi: rtl8192cu: fix comparison to bool warning in hw.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:831:14-49: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-7-zhengbin13@huawei.com

rtlwifi: rtl8821ae: fix comparison to bool warning in phy.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:1816:5-13: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:1825:5-13: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:1839:5-13: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-6-zhengbin13@huawei.com

rtlwifi: rtl8821ae: fix comparison to bool warning in hw.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c:1897:5-13: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-5-zhengbin13@huawei.com

rtlwifi: rtl8192cu: fix comparison to bool warning in mac.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:161:14-17: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:168:13-16: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:179:14-17: WARNING: Comparison to bool
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:186:13-16: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-4-zhengbin13@huawei.com

rtlwifi: rtl8192c: fix comparison to bool warning in phy_common.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c:1106:14-18: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-3-zhengbin13@huawei.com

rtlwifi: rtl8192ee: fix comparison to bool warning in hw.c

Fixes coccicheck warning:

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c:797:6-33: WARNING: Comparison to bool

Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918102505.16036-2-zhengbin13@huawei.com

net: wilc1000: clean up resource in error path of init mon interface

The wilc_wfi_init_mon_int() forgets to clean up resource when
register_netdevice() failed. Add the missed call to fix it.
And the return value of netdev_priv can't be NULL, so remove
the unnecessary error handling.

Fixes: 588713006ea4 ("staging: wilc1000: avoid the use of 'wilc_wfi_mon' static variable")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Huang Guobin <huangguobin4@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200917123019.206382-1-huangguobin4@huawei.com