ci: bump image tags so subprojects get updated

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3432>

subprojects: switch libsoup to a file wrap

With fallback_url.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3432>

subprojects: update glib-networking to 2.74.0 and switch to file wrap

Also has a fallback_url for the tarball.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3432>

subprojects: update glib to 2.74.1

With fallback_url for tarball now too.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3432>

hlsdemux2: Expose EXT-X-PROGRAM-DATE-TIME as tags.

This allows an application to use timestamps associated
with fragments.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1417>

hlsdemux: Expose EXT-X-PROGRAM-DATE-TIME as tags.

This allows an application to use timestamps associated
with fragments.

Patch by: Thomas Bluemel <tbluemel@control4.com>

See: https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/195
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1417>

qtmux: use trun with multiple entries in more cases

The only case where we definitely need to write a new trun is when the
data_offset value does not match the end of the list of entries.
Needing multiple trun atoms is required when interleaving multiple
streams together.

All other cases can be covered by adding more entries to the existing
trun atom.

Fixes playback of fragemented mp4 in ffplay and chrome.

Using e.g. mp4mux fragment-duration=1000 fragment-mode=dash-or-mss
and
mp4mux fragment-duration=1000 fragment-mode=first-moov-then-finalise

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3426>

libs: context: use queried value for attrib

Attribute's value should use returned value from get_attribute for
VAConfigAttribRTFormat, since VAProfileHEVCMain10, in AMD Mesa Gallium,
can process either VA_RT_FORMAT_420 and VA_RT_FORMAT_420_10, which isn't
considered in gstreamer-vaapi design, where encoder's src pads will
expose only 4:2:0 color formats but no 4:2:0 10bit. So, this is a workaround
for this issue while new vah265enc is released.

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3397>

vabaseenc: Reduce logging noise if finish_frame fails.

Fixes: #1579
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3423>

gst-docs: Fix broken tables in Cerbero docs

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3425>

amfcodec: Promote encoder rank to PRIMARY

This H/W encoder implementation is the recommended element
on AMD system over the MediaFoundation one.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3394>

urisourcebin: Remove un-needed define

This code hasn't use GValueArray in ages

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Use a non-buffering multiqueue for non-streamable URI

Even though buffering is not required, we need to ensure we are dealing with the
interleave (if any) before pushing the elementary streams further downstream.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Minor doc fix

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

uridecodebin3: Don't leak EOS event

Make sure to unref the EOS event in all code paths
when returning GST_PAD_PROBE_HANDLED

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

playbin3: Move gapless to uridecodebin3

This was the intention from the start, just took me a few years *cough* to
actually implement it properly.

Gapless is handled by re-using as much as possible the same decoders and sinks
if present, and only pre-rolling switching at the sources level (with buffering
if/when needed).

In order to enable "gapless" playback, the "next" uri should be set at any time
between the moment the `about-to-finish` signal is emitted and the moment the
current play item is done. Previously this could only be done with the signal
emission.

This new implementation also allows "Instantaneous URI switching". This allows a
much faster way of switching playback entries while re-using as many elements as
possible. To enable this set `instant-uri` property to TRUE, the default being
FALSE.

API: instant-uri properties
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

playbin3: Remove unused code

This was never used, and if ever it's needed at some point for reference it's
available in gstplaybin.c

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

decodebin3: Clear input collection when linked again

The previous collection no longer applies to this input

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

decodebin3: Improve collection merging

If the collections are the same, don't merge them

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

decodebin3: doc cleanup

Remove old/invalid FIXME and cleanup some logs

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

decodebin3: Remove unused variable

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

multiqueue: Protect reconfiguration with a lock

Add a lock to prevent overlapping of request and release
pads, to close a race where multiqueue might try and
add a slot with an id that hasn't quite finished being
removed yet by another thread.

Fix for https://gitlab.freedesktop.org/bilboed/gstreamer/-/issues/5
and https://gitlab.freedesktop.org/bilboed/gstreamer/-/issues/11

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

multiqueue: Handle gapless input

When dealing with gapless input (i.e. streams with changing group-id in
GST_EVENT_STREAM_START), we need to take into account the elapsed
running-time (if applicable) in order to properly calculate levels and output
time. Without doing this all incoming data from future groups would be
considered as being "late" and would be consumed immediately.

This does **NOT** modify the actual segment and buffer times, and is only used
internally.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

decodebin3: Allow re-using inputs

DecodebinInput (and their backing parsebin or identity) are no longer released
when the corresponding sinkpad is unlinked, but when it's released.

The parsebin element will be resetted:
* If incoming caps are incompatible (was the case before)
* Or when unlinking and it was previously pull-based

This opens the way to use decodebin3 with changing inputs (i.e. gapless)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

uridecodebin3: use urisourcebin parse-streams property

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Improve buffering handling

Introduce the option to have the streams be parsed with `parsebin` for
compatible sources (i.e. which are eligible for buffering in the same way as
before this commit).

By parsing the inputs directly, this allows more accurate buffering control:
* Instead of relying on potential bitrate information coming from somewhere
* and *without* being linked downstream

If `parse-streams` is activated and the stream is eligible for buffering, then a
`multiqueue` will be used on the output of `parsebin` in order to handle the
buffering.

API: `parse-streams`
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

parsebin: avoid bogus processing

If a parsebin pad is already exposed, don't try to rename it or cause extra
processing which isn't needed

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

decodebin3: Avoid parsebin usage if not needed

If the incoming streams are already parsed, there is no need to add yet-another
parsebin to process it *IF* that stream is compatible with a decoder or the
decodebin3 output caps.

This only applies if all the following conditions are met:
* The incoming stream can *NOT* do pull-based scheduling
* The incoming stream provides a `GstStream` and `GstStreamCollection`
* The caps are compatible with either the decodebin3 output caps or a decoder
  input

If all those conditions are met, a identity element is used instead of a
parsebin element and the same code paths are taken.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

decodebin3: DecodebinInputStream: Hold a ref to srcpad

And move the locking outside of the input stream creation function

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Bring high-watermark level in sync with legacy values

It was always 60%. For some reason this crept in during the initial urisourcebin
refactoring.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

decodebin3: Don't leak collection when releasing inputs

And refactor the function slightly for clarity

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

decodebin3: Protect input freeing with the input lock

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

decodebin3: Refactor parsebin output handling

* Instead of creating temporary `PendingPad` structures, always create a
  DecodebinInputStream for every pad of parsebin
* Remove never used `pending_stream` field from DecodebinInputStream
* When unblocking a given DecodebinInput (i.e. wrapping a parsebin), also make
  sure that other parsebins from the same GstStreamCollection are unblocked
  since they come from the same source

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

decodebin3: Store GstStreamCollection from upstream

If upstream provides stream collection, use/store them as soon as possible

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Move adaptive demuxer handling into ChildSrcPadInfo

It's part of that chain of elements

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Only remove components in PAUSED->READY

With the refactoring, we are guaranteed the components are only created in PAUSED

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Refactor ChildSrcPadInfo and OutputSlot usage

Make an explicit topology/tree of structures:
* ChildSrcPadInfo is created for each source element source pad
* ChildSrcPadInfo contains the chain of optional elements specific to that
  pad (ex: typefind)
* A ChildSrcPadInfo links to one or more OutputSlot, which contain what is
  specific to the output (i.e. optional buffering and ghostpad)
* No longer use GObject {set|get}_data() functions to store those structures and
  instead make them explicit
* Pass those structures around explicitely in each function/callback

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Remove duplicate call

We ensure sources are removed in PAUSED->READY->NULL. No need to call it when
creating the source.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Remove pending pad handling

This was needed to support the legacy handling of changing streams (add new
pads, send EOS and remove old pads).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Only expose pads once activation has completed

The following problem could happen:
* Thread 1 : urisourcebin gets activated from READY->PAUSED
* Thread 2 : some element causes a pad to be added to urisourcebin , which gets
linked downstream, which decides to activate upstream to pull-based.
  * That requires "activating" the pads from PUSH to NONE, and then from NONE to PULL
* Thread 1 : the base class state change handlers checks if all pads are
activated

The issue is that since going form PUSH to PULL requires going through NONE,
there is a window during which:
* Thread 1 : The pad was set to NONE (before being set to PULL)
* Thread 2 : The base class activates that pad (to PUSH)
* Thread 1 : The attempt to "activate" to PULL fails (silently or not)

This is very racy, so in order to avoid that, we make sure that we only add pads
once the transition from READY->PAUSED in the parent classes is done.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Only allow streams-aware adaptive demuxer

We no longer want to deal with elements that use the old-style of stream
switching and instead expose/remove streams as they appear/disappear

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Simplify initial information collection

When iterating existing pads of a source, directly handle them:
* Raw pads are handled directly
* Pads without caps are connected to a typefind
* Other pads are handled via `handle_new_pad()`

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Use iterator function where applicable

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Document and rename fields

Removes ambiguity when reading the code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Remove unused lock/list

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Check for live source when generating element

Instead of at a later stage

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Streamline demuxer removal

And since remove_source also removes the dmeuxer, we no longer need to call it
in addition

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Clarify function name and arguments

* The "need_queue" variable is only used in one place, move it there
* Clarify the fact the function also exposes raw_pads

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

urisourcebin: Error out if a source doesn't expose pads

Looks like this fell through the cracks. If a source element doesn't have
dynamic pads and doesn't provide any source pad ... we should properly error
out.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

tsdemux: Push GST_EVENT_STREAM_COLLECTION

Demuxers that are not streams-aware will have that handled by parsebin. This
created a difference in results downstream between streams-aware and
non-streams-aware demuxers

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

adaptivedemux2: Notify that we are streams-aware

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>

v4l2codecs: Allow output caps to be updated

This change allow output caps to be updated even though we stay in
streaming state. This is needed so that any upstream updated to fields
like framerate, hdr data, etc. can result in a downstream caps event
being pushed.

Previously, any of these changes was being ignored and the downstream
caps would not reflect it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3328>

nvdecoder: Handle input caps change

Update output caps if it's notified by baseclass

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3328>

nvdecoder: Don't hold decoder output state

It's not referenced by this implementation

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3328>

examples: Add test code to verify decoder caps update

Sample command lines
* Configures pipeline with video encoder
decoder-caps-update \
  --encoder="video/x-raw,format=NV12 ! qsvh264enc" \
  --decoder=d3d11h264dec \
  --videosink=d3d11videosink

* Playing exisiting file
decoder-caps-update \
  --location=test_file.mp4 \
  --decoder=d3d11h264dec \
  --videosink=d3d11videosink

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3328>

d3d11decoder: Handle input caps change

Update output caps if it's notified by baseclass

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3328>

codecs: Keep track of non-decoding-essential input state change

In theory, input caps can be updated anytime at non-keyframe or
sequence boundary, such as HDR10 metadata, framerate, aspect-ratio
or so. Those information update might not trigger ::new_sequence()
or subclass may ignore the changes.

By this commit, input state change will be tracked by baseclass
and subclass will be able to know the non-decoding-essential
update by checking the codec specific picture struct
on ::output_picture()

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3328>

Revert "mpegtspacketizer: memcmp potentially seen_before data"

This reverts commit fcad4cc646a23e4e621ec5e8485958ab78d98090.

This was wrong is so many ways.

* The memcmp was badly used (it should use == 0 to check the data is identical,
  and not != 0)
* There was no boundary checks on the present stream section_data when passing
  it to memcmp.
* The return value should have been TRUE (i.e. we have done all checks, none of
  them failed, therefore the section has been seen before)
* stream->section_data would *always* be NULL if the section had already been
  processed

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1559

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3421>

mpegts: Check is program is identical before updating

There is no need to update the program if it's identical :)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3421>

rtspsrc: Fix regression when using hostname in the location property

When the address can't be parsed as an IP address, it should just be
treated as a hostname and used as-is.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1576

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3420>

avviddec: Report a latency even without upstream framerate

There are cases where upstream will not provide a framerate, or it won't be
fixed. But if there is latency introduced by the decoder we do want to report
it.

Therefore use the framerate stored in the actual decoder, which will have a
default.

Fixes hangs when playing back such streams with decodebin3 (where the multiqueue
will not have been informed of that downstream latency and not grow accordingly)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3391>

v4l2videodec: Fixes three H.264/HEVC ITU conformance tests

Postpone the cleanup of any consecutive sequence of lost frames
which starts at frame 0, until frame 100 is dequeued from driver.

This allows fluster tests JVT/CVWP2_TOSHIBA_E, JVC/CVWP3_TOSHIBA_E
and HEVC/POC_A_Bossen_3 that sends out-of-order frames to successfully
complete  (e.g., test of Amphion vpu driver).

Fixes #1569

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3398>

rtpjitterbuffer: Add test for rescheduling timers to negative times

This tests the changes introduced by 4d3b8d1129d8b863e4156cd0334e93257b9d0cc4
for issue #571.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3416>

rtpjitterbuffer: Reschedule timers when updating their offset

As EXPECTED timers are skipped the order of the timers relative to each
other can change if there are EXPECTED timers and rescheduling needs to
happen.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1422

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3416>

wavparse: Do not run all typefinders for all output

In order to figure out if the "raw" audio contained within the wav
container is actually DTS, wavparse calls the typefinder helper
except that means it runs all typefinders.

Since it only cares about checking for DTS, we should only run the
audio/x-dts typefinder (if present). Commit 858e516 did not really
fix things.

Use the new type helper with the caps to fix this.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3417>

typefindhelper: Fix docs/annotations for the new functions

Follow-up for https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3296

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3418>

rtspsrc: Consistently set seqnums on events

Set udpsrc seqnums on all events sent to the udpsrc's, and before
forwarding events out of rtspsrc set the latest seek seqnum on them if
any.

Also produce a consistent seqnum in rtspsrc from the very beginning.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3409>

rtspsrc: Make segment event writable before overriding the seqnum and use the proper API to do so

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3409>

rtspsrc: Intercept and handle events when using no manager too

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3409>

rtspsrc: Don't blindly copy over sticky events from manager pad to external source pad

This would get around the code that modifies some events when they go
through the ghost pad's proxypad. Instead go via the event function.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3409>

rtspsrc: Don't make udpsrc segment events writable just to retrieve their seqnum

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3409>

rtspsrc: Reset EOS flag also on FLUSH_STOP and not only on ssrc-active

Also don't bother not sending EOS if EOS was sent already:
gst_pad_push_event() takes care of that for us already.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3409>

pbutils: Fix vp9 mime mapping when caps when no chroma-site.

It's possible to have 4:2:0 chroma format without chroma-site in caps, but it
isn't validated by the current code. This patch fixes it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3405>

gdkpixbufoverlay: fix docs - changing images at runtime is supported

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3415>

videodecoder: Consider having output data when the subclass drops a frame

The subclass might drop a frame for QoS reasons (e.g. vpxdec) and if all
frames are dropped because of that it wouldn't make sense to post an
error message on EOS.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3408>

codectimestamper: Remove duplicated GstSegment struct

Use the one in priv struct. And use gst_segment_is_equal()
to compare GstSegment

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3380>

h264/5timestamper: provide a workaround for h264/5parse producing pts=NONE buffers

A workaround for
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/649
and
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/287
which is hard to change baseparse behaviour for both video and audio
parsers.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3380>

rtpjitterbuffer: Unlock timer waits on flushing

If there is a pending EOS wait for example, we would never unblock on flushing

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3401>

inspect: Print default value of ValueArray properties

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3377>

nvcodec: Update plugin cache

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3389>

tests: cudaconvert: Update test code

Adding more formats, and rescale test with borders

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3389>

cudaconvertscale, cudascale: Add "add-borders" property and support 8bits RGB planar formats

Adding "add-borders" property which is identical to that of
videoscale and this will be enabled by default.
And adding RGBP/BGRP/GBR/GBRA format support.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3389>

cuda: Rewrite colorspace/rescale object

Rewriting GstCudaConverter object, since the old implementation was not
well organized and it's hard to add new features.
Moreover, the conversion operations were not very optimized.

Major change of this implementation:
* Remove redundant intermediate conversion operations such as
  any RGB -> ARGB(64) conversion or any YUV -> Y444 (or 16bits Y444).
  That's not required most of cases. The only required case is
  converting 24bits (such as RGB/BGR) packed format to 32bits format
  because CUDA texture object does not support sampling 24bits format
* Use normalized sample fetching (i.e., [0, 1] range float value)
  and also normalized coordinates system for CUDA texture.
  It's consistent with the other graphics APIs such as Direct3D
  and OpenGL, that makes sampling operations much easier.
* Support a kind of viewport and adopt math for colorspace conversion
  from GstD3D11 implementation

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3389>

cudaupload,cudadownload: Add support for planar 8bits RGB formats

Defines RGBP, BGRP, and GBR formats, which have the same memory
layout as already supported Y444. And defines GBRA format as well
which needs just one additional alpha plane

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3389>

cudacontext: Store texture alignment

it was missed in the previous refactoring

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3389>

cudaconvert, cudascale: Port to GstCudaBaseCovert baseclass

Don't need to hold duplicated code in the source tree

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3389>

cuda: Add convertscale element

GstCudaConverter object can do colorspace conversion and scale at once.
Adding new element "cudaconvertscale" to do that, this can
save unnecessary GPU operation if colorspace conversion and
rescale is required for given input stream format.

Most of codes are taken from d3d11convert element

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3389>

typefindhelper: Use the new GstTypeFind * API

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3296>

typefindhelper: Introduce a new API for working with a GstTypeFind *

Introduce a new API that can return a GstTypeFind * with helper functions
and data set around buffer data.

While at it, drop factory field from GstTypeFindBufHelper. While it was
useful for logging, it was not passed through function arguments and keeping
it for logging would require an additional API increasing the API surface
and making it harder to use.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3296>

typefindhelper: Add helpers to improve type finding given the caps

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3296>

typefindhelper: Update annotation for function parameters

Fix the nullable/optional situation. allow-none is deprecated and
replaced by either or both of the others.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3296>

validate-scenario: Avoid timeouts on EOS

If there is an EOS and the next action is waiting for a playback time, execute
it since we are guaranteed the position won't change anymore.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3403>

gstplay: add warning message details check before post it

For some warning message which has no detail data, need check to avoid printing critical log.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3382>

tests: Add DASH MPD baseURL with query test

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1147>

mpdparser: Fix missing baseURL query

When no initializationURL or mediaURL, return baseURL that also
contains original URI query if available. This fixes a problem
where URI query was being omitted in the HTTP requests.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1147>

mpdparser: Be consistent about returning duplicated URL

Instead of returning a "const gchar" or a "gchar" that should not be freed, always
return a duplicated string as those functions were used together with g_strdup anyway.

This is needed to prepare support for returning modified strings in next commit.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1147>

mpdparser: Return correct mediaURL value

This fixes a problem where get_mediaURL was returning NULL when segmentURL
was unavailable instead of baseURL as a fallback.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1147>

d3d11converter: Fix YUY2 conversion error

Always configure shader conversion path, then fallback to the
shader path if processor is not available

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3392>

d3d11: Add support for planar RGB formats

Adding RGBP, BGRP, GBR, GBR_10LE, GBR_12LE, GBRA, GBRA_10LE, and
GBRA_12LE format support

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3392>

d3d11screencapturesrc: Update plugin cache

Missed in
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3360

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3392>