Vineet Gupta [Wed, 6 Jun 2018 17:20:37 +0000 (10:20 -0700)]
ARCv2: support manual regfile save on interrupts
[ Upstream commit
e494239a007e601448110ac304fe055951f9de3b ]
There's a hardware bug which affects the HSDK platform, triggered by
micro-ops for auto-saving regfile on taken interrupt. The workaround is
to inhibit autosave.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vineet Gupta [Tue, 5 Feb 2019 18:07:07 +0000 (10:07 -0800)]
ARC: uacces: remove lp_start, lp_end from clobber list
[ Upstream commit
d5e3c55e01d8b1774b37b4647c30fb22f1d39077 ]
Newer ARC gcc handles lp_start, lp_end in a different way and doesn't
like them in the clobber list.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eugeniy Paltsev [Wed, 30 Jan 2019 16:32:40 +0000 (19:32 +0300)]
ARCv2: lib: memcpy: fix doing prefetchw outside of buffer
[ Upstream commit
f8a15f97664178f27dfbf86a38f780a532cb6df0 ]
ARCv2 optimized memcpy uses PREFETCHW instruction for prefetching the
next cache line but doesn't ensure that the line is not past the end of
the buffer. PRETECHW changes the line ownership and marks it dirty,
which can cause data corruption if this area is used for DMA IO.
Fix the issue by avoiding the PREFETCHW. This leads to performance
degradation but it is OK as we'll introduce new memcpy implementation
optimized for unaligned memory access using.
We also cut off all PREFETCH instructions at they are quite useless
here:
* we call PREFETCH right before LOAD instruction call.
* we copy 16 or 32 bytes of data (depending on CONFIG_ARC_HAS_LL64)
in a main logical loop. so we call PREFETCH 4 times (or 2 times)
for each L1 cache line (in case of 64B L1 cache Line which is
default case). Obviously this is not optimal.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeff Kirsher [Mon, 28 Jan 2019 17:45:01 +0000 (09:45 -0800)]
ixgbe: fix older devices that do not support IXGBE_MRQC_L3L4TXSWEN
[ Upstream commit
156a67a9065e3339be85f811d1b13b920e50d73b ]
The enabling L3/L4 filtering for transmit switched packets for all
devices caused unforeseen issue on older devices when trying to send UDP
traffic in an ordered sequence. This bit was originally intended for X550
devices, which supported this feature, so limit the scope of this bit to
only X550 devices.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Darrick J. Wong [Thu, 21 Feb 2019 16:48:09 +0000 (08:48 -0800)]
tmpfs: fix link accounting when a tmpfile is linked in
[ Upstream commit
1062af920c07f5b54cf5060fde3339da6df0cf6b ]
tmpfs has a peculiarity of accounting hard links as if they were
separate inodes: so that when the number of inodes is limited, as it is
by default, a user cannot soak up an unlimited amount of unreclaimable
dcache memory just by repeatedly linking a file.
But when v3.11 added O_TMPFILE, and the ability to use linkat() on the
fd, we missed accommodating this new case in tmpfs: "df -i" shows that
an extra "inode" remains accounted after the file is unlinked and the fd
closed and the actual inode evicted. If a user repeatedly links
tmpfiles into a tmpfs, the limit will be hit (ENOSPC) even after they
are deleted.
Just skip the extra reservation from shmem_link() in this case: there's
a sense in which this first link of a tmpfile is then cheaper than a
hard link of another file, but the accounting works out, and there's
still good limiting, so no need to do anything more complicated.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1902182134370.7035@eggly.anvils
Fixes:
f4e0c30c191 ("allow the temp files created by open() to be linked to")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Matej Kupljen <matej.kupljen@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Hocko [Thu, 21 Feb 2019 06:19:54 +0000 (22:19 -0800)]
mm: handle lru_add_drain_all for UP properly
[ Upstream commit
6ea183d60c469560e7b08a83c9804299e84ec9eb ]
Since for_each_cpu(cpu, mask) added by commit
2d3854a37e8b767a
("cpumask: introduce new API, without changing anything") did not
evaluate the mask argument if NR_CPUS == 1 due to CONFIG_SMP=n,
lru_add_drain_all() is hitting WARN_ON() at __flush_work() added by
commit
4d43d395fed12463 ("workqueue: Try to catch flush_work() without
INIT_WORK().") by unconditionally calling flush_work() [1].
Workaround this issue by using CONFIG_SMP=n specific lru_add_drain_all
implementation. There is no real need to defer the implementation to
the workqueue as the draining is going to happen on the local cpu. So
alias lru_add_drain_all to lru_add_drain which does all the necessary
work.
[akpm@linux-foundation.org: fix various build warnings]
[1] https://lkml.kernel.org/r/
18a30387-6aa5-6123-e67c-
57579ecc3f38@roeck-us.net
Link: http://lkml.kernel.org/r/20190213124334.GH4525@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Debugged-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell King [Fri, 15 Feb 2019 13:55:47 +0000 (13:55 +0000)]
net: marvell: mvneta: fix DMA debug warning
[ Upstream commit
a8fef9ba58c9966ddb1fec916d8d8137c9d8bc89 ]
Booting 4.20 on SolidRun Clearfog issues this warning with DMA API
debug enabled:
WARNING: CPU: 0 PID: 555 at kernel/dma/debug.c:1230 check_sync+0x514/0x5bc
mvneta
f1070000.ethernet: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000002dd7dc00] [size=240 bytes]
Modules linked in: ahci mv88e6xxx dsa_core xhci_plat_hcd xhci_hcd devlink armada_thermal marvell_cesa des_generic ehci_orion phy_armada38x_comphy mcp3021 spi_orion evbug sfp mdio_i2c ip_tables x_tables
CPU: 0 PID: 555 Comm: bridge-network- Not tainted 4.20.0+ #291
Hardware name: Marvell Armada 380/385 (Device Tree)
[<
c0019638>] (unwind_backtrace) from [<
c0014888>] (show_stack+0x10/0x14)
[<
c0014888>] (show_stack) from [<
c07f54e0>] (dump_stack+0x9c/0xd4)
[<
c07f54e0>] (dump_stack) from [<
c00312bc>] (__warn+0xf8/0x124)
[<
c00312bc>] (__warn) from [<
c00313b0>] (warn_slowpath_fmt+0x38/0x48)
[<
c00313b0>] (warn_slowpath_fmt) from [<
c00b0370>] (check_sync+0x514/0x5bc)
[<
c00b0370>] (check_sync) from [<
c00b04f8>] (debug_dma_sync_single_range_for_cpu+0x6c/0x74)
[<
c00b04f8>] (debug_dma_sync_single_range_for_cpu) from [<
c051bd14>] (mvneta_poll+0x298/0xf58)
[<
c051bd14>] (mvneta_poll) from [<
c0656194>] (net_rx_action+0x128/0x424)
[<
c0656194>] (net_rx_action) from [<
c000a230>] (__do_softirq+0xf0/0x540)
[<
c000a230>] (__do_softirq) from [<
c00386e0>] (irq_exit+0x124/0x144)
[<
c00386e0>] (irq_exit) from [<
c009b5e0>] (__handle_domain_irq+0x58/0xb0)
[<
c009b5e0>] (__handle_domain_irq) from [<
c03a63c4>] (gic_handle_irq+0x48/0x98)
[<
c03a63c4>] (gic_handle_irq) from [<
c0009a10>] (__irq_svc+0x70/0x98)
...
This appears to be caused by mvneta_rx_hwbm() calling
dma_sync_single_range_for_cpu() with the wrong struct device pointer,
as the buffer manager device pointer is used to map and unmap the
buffer. Fix this.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thierry Reding [Mon, 11 Feb 2019 11:09:19 +0000 (12:09 +0100)]
ARM: tegra: Restore DT ABI on Tegra124 Chromebooks
[ Upstream commit
94d9b9337d09bdd27735005b3251d97ab29f7273 ]
Commit
482997699ef0 ("ARM: tegra: Fix unit_address_vs_reg DTC warnings
for /memory") inadventently broke device tree ABI by adding a unit-
address to the "/memory" node because the device tree compiler flagged
the missing unit-address as a warning.
Tegra124 Chromebooks (a.k.a. Nyan) use a bootloader that relies on the
full name of the memory node in device tree being exactly "/memory". It
can be argued whether this was a good decision or not, and some other
bootloaders (such as U-Boot) do accept a unit-address in the name of the
node, but the device tree is an ABI and we can't break existing setups
just because the device tree compiler considers it bad practice to omit
the unit-address nowadays.
This partially reverts the offending commit and restores device tree ABI
compatibility.
Fixes:
482997699ef0 ("ARM: tegra: Fix unit_address_vs_reg DTC warnings for /memory")
Reported-by: Tristan Bastian <tristan-c.bastian@gmx.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Tristan Bastian <tristan-c.bastian@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Murzin [Wed, 20 Feb 2019 11:43:05 +0000 (11:43 +0000)]
arm64: Relax GIC version check during early boot
[ Upstream commit
74698f6971f25d045301139413578865fc2bd8f9 ]
Updates to the GIC architecture allow ID_AA64PFR0_EL1.GIC to have
values other than 0 or 1. At the moment, Linux is quite strict in the
way it handles this field at early boot stage (cpufeature is fine) and
will refuse to use the system register CPU interface if it doesn't
find the value 1.
Fixes:
021f653791ad17e03f98aaa7fb933816ae16f161 ("irqchip: gic-v3: Initial support for GICv3")
Reported-by: Chase Conklin <Chase.Conklin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Petazzoni [Fri, 15 Feb 2019 15:30:42 +0000 (16:30 +0100)]
ARM: dts: armada-xp: fix Armada XP boards NAND description
[ Upstream commit
6fc979179c98d2591784937d5618edc3e5cd31c1 ]
Commit
3b79919946cd2cf4dac47842afc9a893acec4ed7 ("ARM: dts:
armada-370-xp: update NAND node with new bindings") updated some
Marvell Armada DT description to use the new NAND controller bindings,
but did it incorrectly for a number of boards: armada-xp-gp,
armada-xp-db and armada-xp-lenovo-ix4-300d. Due to this, the NAND is
no longer detected on those platforms.
This commit fixes that by properly using the new NAND DT binding. This
commit was runtime-tested on Armada XP GP, the two other platforms are
only compile-tested.
Fixes:
3b79919946cd2 ("ARM: dts: armada-370-xp: update NAND node with new bindings")
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Kalderon [Mon, 18 Feb 2019 13:24:03 +0000 (15:24 +0200)]
qed: Fix iWARP syn packet mac address validation.
[ Upstream commit
8be3dadf04050c2907760ec1955ca1c8fbc25585 ]
The ll2 forwards all syn packets to the driver without validating the mac
address. Add validation check in the driver's iWARP listener flow and drop
the packet if it isn't intended for the device.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Kalderon [Mon, 18 Feb 2019 13:24:02 +0000 (15:24 +0200)]
qed: Fix iWARP buffer size provided for syn packet processing.
[ Upstream commit
9addc92730df55e2c05e8d3f69267a89d65bcba8 ]
The assumption that the maximum size of a syn packet is 128 bytes
is wrong. Tunneling headers were not accounted for.
Allocate buffers large enough for mtu.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bard liao [Sun, 17 Feb 2019 13:23:47 +0000 (21:23 +0800)]
ASoC: topology: free created components in tplg load error
[ Upstream commit
304017d31df36fb61eb2ed3ebf65fb6870b3c731 ]
Topology resources are no longer needed if any element failed to load.
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rayagonda Kokatanur [Mon, 4 Feb 2019 19:21:29 +0000 (11:21 -0800)]
mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush timeout issue
[ Upstream commit
d7bf31a0f85faaf63c63c39d55154825a1eaaea9 ]
RING_CONTROL reg was not written due to wrong address, hence all
the subsequent ring flush was timing out.
Fixes:
a371c10ea4b3 ("mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tobias Brunner [Mon, 18 Feb 2019 09:49:39 +0000 (10:49 +0100)]
xfrm: Fix inbound traffic via XFRM interfaces across network namespaces
[ Upstream commit
660899ddf06ae8bb5bbbd0a19418b739375430c5 ]
After moving an XFRM interface to another namespace it stays associated
with the original namespace (net in `struct xfrm_if` and the list keyed
with `xfrmi_net_id`), allowing processes in the new namespace to use
SAs/policies that were created in the original namespace. For instance,
this allows a keying daemon in one namespace to establish IPsec SAs for
other namespaces without processes there having access to the keys or IKE
credentials.
This worked fine for outbound traffic, however, for inbound traffic the
lookup for the interfaces and the policies used the incorrect namespace
(the one the XFRM interface was moved to).
Fixes:
f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey Khoroshilov [Fri, 15 Feb 2019 21:20:54 +0000 (00:20 +0300)]
net: mv643xx_eth: disable clk on error path in mv643xx_eth_shared_probe()
[ Upstream commit
e928b5d6b75e239feb9c6d5488974b6646a0ebc8 ]
If mv643xx_eth_shared_of_probe() fails, mv643xx_eth_shared_probe()
leaves clk enabled.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Beniamino Galvani [Fri, 15 Feb 2019 12:20:42 +0000 (13:20 +0100)]
qmi_wwan: apply SET_DTR quirk to Sierra WP7607
[ Upstream commit
97dc47a1308a3af46a09b1546cfb869f2e382a81 ]
The 1199:68C0 USB ID is reused by Sierra WP7607 which requires the DTR
quirk to be detected. Apply QMI_QUIRK_SET_DTR unconditionally as
already done for other IDs shared between different devices.
Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Blumenstingl [Sat, 9 Feb 2019 01:01:01 +0000 (02:01 +0100)]
pinctrl: meson: meson8b: fix the sdxc_a data 1..3 pins
[ Upstream commit
c17abcfa93bf0be5e48bb011607d237ac2bfc839 ]
Fix the mismatch between the "sdxc_d13_1_a" pin group definition from
meson8b_cbus_groups and the entry in sdxc_a_groups ("sdxc_d0_13_1_a").
This makes it possible to use "sdxc_d13_1_a" in device-tree files to
route the MMC data 1..3 pins to GPIOX_1..3.
Fixes:
0fefcb6876d0d6 ("pinctrl: Add support for Meson8b")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Fainelli [Fri, 15 Feb 2019 20:16:52 +0000 (12:16 -0800)]
net: dsa: bcm_sf2: Do not assume DSA master supports WoL
[ Upstream commit
c3152ec4c0691e351f35a2f63347a464b5f35151 ]
We assume in the bcm_sf2 driver that the DSA master network device
supports ethtool_ops::{get,set}_wol operations, which is not a given.
Avoid de-referencing potentially non-existent function pointers and
check them as we should.
Fixes:
96e65d7f3f88 ("net: dsa: bcm_sf2: add support for Wake-on-LAN")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Fainelli [Fri, 15 Feb 2019 20:16:51 +0000 (12:16 -0800)]
net: systemport: Fix reception of BPDUs
[ Upstream commit
a40061ea2e39494104602b3048751341bda374a1 ]
SYSTEMPORT has its RXCHK parser block that attempts to validate the
packet structures, unfortunately setting the L2 header check bit will
cause Bridge PDUs (BPDUs) to be incorrectly rejected because they look
like LLC/SNAP packets with a non-IPv4 or non-IPv6 Ethernet Type.
Fixes:
4e8aedfe78c7 ("net: systemport: Turn on offloads by default")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anoob Soman [Wed, 13 Feb 2019 05:21:39 +0000 (13:21 +0800)]
scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
[ Upstream commit
79edd00dc6a96644d76b4a1cb97d94d49e026768 ]
When a target sends Check Condition, whilst initiator is busy xmiting
re-queued data, could lead to race between iscsi_complete_task() and
iscsi_xmit_task() and eventually crashing with the following kernel
backtrace.
[3326150.987523] ALERT: BUG: unable to handle kernel NULL pointer dereference at
0000000000000078
[3326150.987549] ALERT: IP: [<
ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.987571] WARN: PGD
569c8067 PUD
569c9067 PMD 0
[3326150.987582] WARN: Oops: 0002 [#1] SMP
[3326150.987593] WARN: Modules linked in: tun nfsv3 nfs fscache dm_round_robin
[3326150.987762] WARN: CPU: 2 PID: 8399 Comm: kworker/u32:1 Tainted: G O 4.4.0+2 #1
[3326150.987774] WARN: Hardware name: Dell Inc. PowerEdge R720/0W7JN5, BIOS 2.5.4 01/22/2016
[3326150.987790] WARN: Workqueue: iscsi_q_13 iscsi_xmitworker [libiscsi]
[3326150.987799] WARN: task:
ffff8801d50f3800 ti:
ffff8801f5458000 task.ti:
ffff8801f5458000
[3326150.987810] WARN: RIP: e030:[<
ffffffffa05ce70d>] [<
ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.987825] WARN: RSP: e02b:
ffff8801f545bdb0 EFLAGS:
00010246
[3326150.987831] WARN: RAX:
00000000ffffffc3 RBX:
ffff880282d2ab20 RCX:
ffff88026b6ac480
[3326150.987842] WARN: RDX:
0000000000000000 RSI:
00000000fffffe01 RDI:
ffff880282d2ab20
[3326150.987852] WARN: RBP:
ffff8801f545bdc8 R08:
0000000000000000 R09:
0000000000000008
[3326150.987862] WARN: R10:
0000000000000000 R11:
000000000000fe88 R12:
0000000000000000
[3326150.987872] WARN: R13:
ffff880282d2abe8 R14:
ffff880282d2abd8 R15:
ffff880282d2ac08
[3326150.987890] WARN: FS:
00007f5a866b4840(0000) GS:
ffff88028a640000(0000) knlGS:
0000000000000000
[3326150.987900] WARN: CS: e033 DS: 0000 ES: 0000 CR0:
0000000080050033
[3326150.987907] WARN: CR2:
0000000000000078 CR3:
0000000070244000 CR4:
0000000000042660
[3326150.987918] WARN: Stack:
[3326150.987924] WARN:
ffff880282d2ad58 ffff880282d2ab20 ffff880282d2abe8 ffff8801f545be18
[3326150.987938] WARN:
ffffffffa05cea90 ffff880282d2abf8 ffff88026b59cc80 ffff88026b59cc00
[3326150.987951] WARN:
ffff88022acf32c0 ffff880289491800 ffff880255a80800 0000000000000400
[3326150.987964] WARN: Call Trace:
[3326150.987975] WARN: [<
ffffffffa05cea90>] iscsi_xmitworker+0x2f0/0x360 [libiscsi]
[3326150.987988] WARN: [<
ffffffff8108862c>] process_one_work+0x1fc/0x3b0
[3326150.987997] WARN: [<
ffffffff81088f95>] worker_thread+0x2a5/0x470
[3326150.988006] WARN: [<
ffffffff8159cad8>] ? __schedule+0x648/0x870
[3326150.988015] WARN: [<
ffffffff81088cf0>] ? rescuer_thread+0x300/0x300
[3326150.988023] WARN: [<
ffffffff8108ddf5>] kthread+0xd5/0xe0
[3326150.988031] WARN: [<
ffffffff8108dd20>] ? kthread_stop+0x110/0x110
[3326150.988040] WARN: [<
ffffffff815a0bcf>] ret_from_fork+0x3f/0x70
[3326150.988048] WARN: [<
ffffffff8108dd20>] ? kthread_stop+0x110/0x110
[3326150.988127] ALERT: RIP [<
ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.988138] WARN: RSP <
ffff8801f545bdb0>
[3326150.988144] WARN: CR2:
0000000000000078
[3326151.020366] WARN: ---[ end trace
1c60974d4678d81b ]---
Commit
6f8830f5bbab ("scsi: libiscsi: add lock around task lists to fix
list corruption regression") introduced "taskqueuelock" to fix list
corruption during the race, but this wasn't enough.
Re-setting of conn->task to NULL, could race with iscsi_xmit_task().
iscsi_complete_task()
{
....
if (conn->task == task)
conn->task = NULL;
}
conn->task in iscsi_xmit_task() could be NULL and so will be task.
__iscsi_get_task(task) will crash (NullPtr de-ref), trying to access
refcount.
iscsi_xmit_task()
{
struct iscsi_task *task = conn->task;
__iscsi_get_task(task);
}
This commit will take extra conn->session->back_lock in iscsi_xmit_task()
to ensure iscsi_xmit_task() waits for iscsi_complete_task(), if
iscsi_complete_task() wins the race. If iscsi_xmit_task() wins the race,
iscsi_xmit_task() increments task->refcount
(__iscsi_get_task) ensuring iscsi_complete_task() will not iscsi_free_task().
Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Acked-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Thu, 14 Feb 2019 16:20:25 +0000 (16:20 +0000)]
keys: Fix dependency loop between construction record and auth key
[ Upstream commit
822ad64d7e46a8e2c8b8a796738d7b657cbb146d ]
In the request_key() upcall mechanism there's a dependency loop by which if
a key type driver overrides the ->request_key hook and the userspace side
manages to lose the authorisation key, the auth key and the internal
construction record (struct key_construction) can keep each other pinned.
Fix this by the following changes:
(1) Killing off the construction record and using the auth key instead.
(2) Including the operation name in the auth key payload and making the
payload available outside of security/keys/.
(3) The ->request_key hook is given the authkey instead of the cons
record and operation name.
Changes (2) and (3) allow the auth key to naturally be cleaned up if the
keyring it is in is destroyed or cleared or the auth key is unlinked.
Fixes:
7ee02a316600 ("keys: Fix dependency loop between construction record and auth key")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Thu, 14 Feb 2019 16:20:15 +0000 (16:20 +0000)]
assoc_array: Fix shortcut creation
[ Upstream commit
bb2ba2d75a2d673e76ddaf13a9bd30d6a8b1bb08 ]
Fix the creation of shortcuts for which the length of the index key value
is an exact multiple of the machine word size. The problem is that the
code that blanks off the unused bits of the shortcut value malfunctions if
the number of bits in the last word equals machine word size. This is due
to the "<<" operator being given a shift of zero in this case, and so the
mask that should be all zeros is all ones instead. This causes the
subsequent masking operation to clear everything rather than clearing
nothing.
Ordinarily, the presence of the hash at the beginning of the tree index key
makes the issue very hard to test for, but in this case, it was encountered
due to a development mistake that caused the hash output to be either 0
(keyring) or 1 (non-keyring) only. This made it susceptible to the
keyctl/unlink/valid test in the keyutils package.
The fix is simply to skip the blanking if the shift would be 0. For
example, an index key that is 64 bits long would produce a 0 shift and thus
a 'blank' of all 1s. This would then be inverted and AND'd onto the
index_key, incorrectly clearing the entire last word.
Fixes:
3cb989501c26 ("Add a generic associative array implementation.")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robin Murphy [Wed, 6 Feb 2019 17:43:24 +0000 (18:43 +0100)]
ARM: 8835/1: dma-mapping: Clear DMA ops on teardown
[ Upstream commit
fc67e6f120a388b611d94cc40baf99a5cc56b283 ]
Installing the appropriate non-IOMMU DMA ops in arm_iommu_detch_device()
serves the case where IOMMU-aware drivers choose to control their own
mapping but still make DMA API calls, however it also affects the case
when the arch code itself tears down the mapping upon driver unbinding,
where the ops now get left in place and can inhibit arch_setup_dma_ops()
on subsequent re-probe attempts.
Fix the latter case by making sure that arch_teardown_dma_ops() cleans
up whenever the ops were automatically installed by its counterpart.
Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes:
1874619a7df4 "ARM: dma-mapping: Set proper DMA ops in arm_iommu_detach_device()"
Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Tranchetti [Thu, 7 Feb 2019 20:33:21 +0000 (13:33 -0700)]
af_key: unconditionally clone on broadcast
[ Upstream commit
fc2d5cfdcfe2ab76b263d91429caa22451123085 ]
Attempting to avoid cloning the skb when broadcasting by inflating
the refcount with sock_hold/sock_put while under RCU lock is dangerous
and violates RCU principles. It leads to subtle race conditions when
attempting to free the SKB, as we may reference sockets that have
already been freed by the stack.
Unable to handle kernel paging request at virtual address
6b6b6b6b6b6c4b
[
006b6b6b6b6b6c4b] address between user and kernel address ranges
Internal error: Oops:
96000004 [#1] PREEMPT SMP
task:
fffffff78f65b380 task.stack:
ffffff8049a88000
pc : sock_rfree+0x38/0x6c
lr : skb_release_head_state+0x6c/0xcc
Process repro (pid: 7117, stack limit = 0xffffff8049a88000)
Call trace:
sock_rfree+0x38/0x6c
skb_release_head_state+0x6c/0xcc
skb_release_all+0x1c/0x38
__kfree_skb+0x1c/0x30
kfree_skb+0xd0/0xf4
pfkey_broadcast+0x14c/0x18c
pfkey_sendmsg+0x1d8/0x408
sock_sendmsg+0x44/0x60
___sys_sendmsg+0x1d0/0x2a8
__sys_sendmsg+0x64/0xb4
SyS_sendmsg+0x34/0x4c
el0_svc_naked+0x34/0x38
Kernel panic - not syncing: Fatal exception
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexei Starovoitov [Sun, 10 Feb 2019 20:52:35 +0000 (12:52 -0800)]
bpf: fix lockdep false positive in stackmap
[ Upstream commit
3defaf2f15b2bfd86c6664181ac009e91985f8ac ]
Lockdep warns about false positive:
[ 11.211460] ------------[ cut here ]------------
[ 11.211936] DEBUG_LOCKS_WARN_ON(depth <= 0)
[ 11.211985] WARNING: CPU: 0 PID: 141 at ../kernel/locking/lockdep.c:3592 lock_release+0x1ad/0x280
[ 11.213134] Modules linked in:
[ 11.214954] RIP: 0010:lock_release+0x1ad/0x280
[ 11.223508] Call Trace:
[ 11.223705] <IRQ>
[ 11.223874] ? __local_bh_enable+0x7a/0x80
[ 11.224199] up_read+0x1c/0xa0
[ 11.224446] do_up_read+0x12/0x20
[ 11.224713] irq_work_run_list+0x43/0x70
[ 11.225030] irq_work_run+0x26/0x50
[ 11.225310] smp_irq_work_interrupt+0x57/0x1f0
[ 11.225662] irq_work_interrupt+0xf/0x20
since rw_semaphore is released in a different task vs task that locked the sema.
It is expected behavior.
Fix the warning with up_read_non_owner() and rwsem_release() annotation.
Fixes:
bae77c5eb5b2 ("bpf: enable stackmap with build_id in nmi context")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Willem de Bruijn [Thu, 7 Feb 2019 19:54:16 +0000 (14:54 -0500)]
bpf: only adjust gso_size on bytestream protocols
[ Upstream commit
b90efd2258749e04e1b3f71ef0d716f2ac2337e0 ]
bpf_skb_change_proto and bpf_skb_adjust_room change skb header length.
For GSO packets they adjust gso_size to maintain the same MTU.
The gso size can only be safely adjusted on bytestream protocols.
Commit
d02f51cbcf12 ("bpf: fix bpf_skb_adjust_net/bpf_skb_proto_xlat
to deal with gso sctp skbs") excluded SKB_GSO_SCTP.
Since then type SKB_GSO_UDP_L4 has been added, whose contents are one
gso_size unit per datagram. Also exclude these.
Move from a blacklist to a whitelist check to future proof against
additional such new GSO types, e.g., for fraglist based GRO.
Fixes:
bec1f6f69736 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dietmar Eggemann [Mon, 21 Jan 2019 13:42:42 +0000 (14:42 +0100)]
ARM: 8824/1: fix a migrating irq bug when hotplug cpu
[ Upstream commit
1b5ba350784242eb1f899bcffd95d2c7cff61e84 ]
Arm TC2 fails cpu hotplug stress test.
This issue was tracked down to a missing copy of the new affinity
cpumask for the vexpress-spc interrupt into struct
irq_common_data.affinity when the interrupt is migrated in
migrate_one_irq().
Fix it by replacing the arm specific hotplug cpu migration with the
generic irq code.
This is the counterpart implementation to commit
217d453d473c ("arm64:
fix a migrating irq bug when hotplug cpu").
Tested with cpu hotplug stress test on Arm TC2 (multi_v7_defconfig plus
CONFIG_ARM_BIG_LITTLE_CPUFREQ=y and CONFIG_ARM_VEXPRESS_SPC_CPUFREQ=y).
The vexpress-spc interrupt (irq=22) on this board is affine to CPU0.
Its affinity cpumask now changes correctly e.g. from 0 to 1-4 when
CPU0 is hotplugged out.
Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Willi [Mon, 28 Jan 2019 08:35:35 +0000 (09:35 +0100)]
esp: Skip TX bytes accounting when sending from a request socket
[ Upstream commit
09db51241118aeb06e1c8cd393b45879ce099b36 ]
On ESP output, sk_wmem_alloc is incremented for the added padding if a
socket is associated to the skb. When replying with TCP SYNACKs over
IPsec, the associated sk is a casted request socket, only. Increasing
sk_wmem_alloc on a request socket results in a write at an arbitrary
struct offset. In the best case, this produces the following WARNING:
WARNING: CPU: 1 PID: 0 at lib/refcount.c:102 esp_output_head+0x2e4/0x308 [esp4]
refcount_t: addition on 0; use-after-free.
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc3 #2
Hardware name: Marvell Armada 380/385 (Device Tree)
[...]
[<
bf0ff354>] (esp_output_head [esp4]) from [<
bf1006a4>] (esp_output+0xb8/0x180 [esp4])
[<
bf1006a4>] (esp_output [esp4]) from [<
c05dee64>] (xfrm_output_resume+0x558/0x664)
[<
c05dee64>] (xfrm_output_resume) from [<
c05d07b0>] (xfrm4_output+0x44/0xc4)
[<
c05d07b0>] (xfrm4_output) from [<
c05956bc>] (tcp_v4_send_synack+0xa8/0xe8)
[<
c05956bc>] (tcp_v4_send_synack) from [<
c0586ad8>] (tcp_conn_request+0x7f4/0x948)
[<
c0586ad8>] (tcp_conn_request) from [<
c058c404>] (tcp_rcv_state_process+0x2a0/0xe64)
[<
c058c404>] (tcp_rcv_state_process) from [<
c05958ac>] (tcp_v4_do_rcv+0xf0/0x1f4)
[<
c05958ac>] (tcp_v4_do_rcv) from [<
c0598a4c>] (tcp_v4_rcv+0xdb8/0xe20)
[<
c0598a4c>] (tcp_v4_rcv) from [<
c056eb74>] (ip_protocol_deliver_rcu+0x2c/0x2dc)
[<
c056eb74>] (ip_protocol_deliver_rcu) from [<
c056ee6c>] (ip_local_deliver_finish+0x48/0x54)
[<
c056ee6c>] (ip_local_deliver_finish) from [<
c056eecc>] (ip_local_deliver+0x54/0xec)
[<
c056eecc>] (ip_local_deliver) from [<
c056efac>] (ip_rcv+0x48/0xb8)
[<
c056efac>] (ip_rcv) from [<
c0519c2c>] (__netif_receive_skb_one_core+0x50/0x6c)
[...]
The issue triggers only when not using TCP syncookies, as for syncookies
no socket is associated.
Fixes:
cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes:
03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andre Przywara [Wed, 23 Jan 2019 00:59:11 +0000 (00:59 +0000)]
clk: sunxi: A31: Fix wrong AHB gate number
[ Upstream commit
ee0b27a3a4da0b0ed2318aa092f8856896e9450b ]
According to the manual the gate clock for MMC3 is at bit 11, and NAND1
is controlled by bit 12.
Fix the gate bit definitions in the clock driver.
Fixes:
c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eugene Loh [Thu, 17 Jan 2019 22:46:00 +0000 (14:46 -0800)]
kallsyms: Handle too long symbols in kallsyms.c
[ Upstream commit
6db2983cd8064808141ccefd75218f5b4345ffae ]
When checking for symbols with excessively long names,
account for null terminating character.
Fixes:
f3462aa952cf ("Kbuild: Handle longer symbols in kallsyms.c")
Signed-off-by: Eugene Loh <eugene.loh@oracle.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Kocialkowski [Tue, 22 Jan 2019 08:16:19 +0000 (09:16 +0100)]
clk: sunxi-ng: v3s: Fix TCON reset de-assert bit
[ Upstream commit
5c59801f7018acba11b12de59017a3fcdcf7421d ]
According to the datasheet and the reference code from Allwinner, the
bit used to de-assert the TCON reset is bit 4, not bit 3.
Fix it in the V3s CCU driver.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gabriel Fernandez [Sun, 17 Feb 2019 05:10:16 +0000 (21:10 -0800)]
Input: st-keyscan - fix potential zalloc NULL dereference
[ Upstream commit
2439d37e1bf8a34d437573c086572abe0f3f1b15 ]
This patch fixes the following static checker warning:
drivers/input/keyboard/st-keyscan.c:156 keyscan_probe()
error: potential zalloc NULL dereference: 'keypad_data->input_dev'
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miguel Ojeda [Fri, 8 Feb 2019 23:38:45 +0000 (00:38 +0100)]
auxdisplay: ht16k33: fix potential user-after-free on module unload
[ Upstream commit
69ef9bc54715fb1cb7786ada15774e469e822209 ]
On module unload/remove, we need to ensure that work does not run
after we have freed resources. Concretely, cancel_delayed_work()
may return while the callback function is still running.
From kernel/workqueue.c:
The work callback function may still be running on return,
unless it returns true and the work doesn't re-arm itself.
Explicitly flush or use cancel_delayed_work_sync() to wait on it.
Link: https://lore.kernel.org/lkml/20190204220952.30761-1-TheSven73@googlemail.com/
Reported-by: Sven Van Asbroeck <thesven73@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com>
Acked-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Kocialkowski [Thu, 27 Dec 2018 15:42:25 +0000 (16:42 +0100)]
i2c: bcm2835: Clear current buffer pointers and counts after a transfer
[ Upstream commit
f275a4659484716259cc46268d9043424e51cf0f ]
The driver's interrupt handler checks whether a message is currently
being handled with the curr_msg pointer. When it is NULL, the interrupt
is considered to be unexpected. Similarly, the i2c_start_transfer
routine checks for the remaining number of messages to handle in
num_msgs.
However, these values are never cleared and always keep the message and
number relevant to the latest transfer (which might be done already and
the underlying message memory might have been freed).
When an unexpected interrupt hits with the DONE bit set, the isr will
then try to access the flags field of the curr_msg structure, leading
to a fatal page fault.
The msg_buf and msg_buf_remaining fields are also never cleared at the
end of the transfer, which can lead to similar pitfalls.
Fix these issues by introducing a cleanup function and always calling
it after a transfer is finished.
Fixes:
e2474541032d ("i2c: bcm2835: Fix hang for writing messages larger than 16 bytes")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shubhrajyoti Datta [Tue, 5 Feb 2019 11:12:53 +0000 (16:42 +0530)]
i2c: cadence: Fix the hold bit setting
[ Upstream commit
d358def706880defa4c9e87381c5bf086a97d5f9 ]
In case the hold bit is not needed we are carrying the old values.
Fix the same by resetting the bit when not needed.
Fixes the sporadic i2c bus lockups on National Instruments
Zynq-based devices.
Fixes:
df8eb5691c48 ("i2c: Add driver for Cadence I2C controller")
Reported-by: Kyle Roeschley <kyle.roeschley@ni.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Tested-by: Kyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Huang Zijiang [Thu, 14 Feb 2019 06:41:45 +0000 (14:41 +0800)]
net: hns: Fix object reference leaks in hns_dsaf_roce_reset()
[ Upstream commit
c969c6e7ab8cb42b5c787c567615474fdbad9d6a ]
The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.
Signed-off-by: Huang Zijiang <huang.zijiang@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jann Horn [Wed, 13 Feb 2019 21:45:59 +0000 (22:45 +0100)]
mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs
[ Upstream commit
2c2ade81741c66082f8211f0b96cf509cc4c0218 ]
The basic idea behind ->pagecnt_bias is: If we pre-allocate the maximum
number of references that we might need to create in the fastpath later,
the bump-allocation fastpath only has to modify the non-atomic bias value
that tracks the number of extra references we hold instead of the atomic
refcount. The maximum number of allocations we can serve (under the
assumption that no allocation is made with size 0) is nc->size, so that's
the bias used.
However, even when all memory in the allocation has been given away, a
reference to the page is still held; and in the `offset < 0` slowpath, the
page may be reused if everyone else has dropped their references.
This means that the necessary number of references is actually
`nc->size+1`.
Luckily, from a quick grep, it looks like the only path that can call
page_frag_alloc(fragsz=1) is TAP with the IFF_NAPI_FRAGS flag, which
requires CAP_NET_ADMIN in the init namespace and is only intended to be
used for kernel testing and fuzzing.
To test for this issue, put a `WARN_ON(page_ref_count(page) == 0)` in the
`offset < 0` path, below the virt_to_page() call, and then repeatedly call
writev() on a TAP device with IFF_TAP|IFF_NO_PI|IFF_NAPI_FRAGS|IFF_NAPI,
with a vector consisting of 15 elements containing 1 byte each.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rajneesh Bhardwaj [Thu, 14 Feb 2019 11:57:08 +0000 (17:27 +0530)]
x86/CPU: Add Icelake model number
[ Upstream commit
8cd8f0ce0d6aafe661cb3d6781c8b82bc696c04d ]
Add the CPUID model number of Icelake (ICL) mobile processors to the
Intel family list. Icelake U/Y series uses model number 0x7E.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David E. Box" <david.e.box@intel.com>
Cc: dvhart@infradead.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190214115712.19642-2-rajneesh.bhardwaj@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 13 Feb 2019 08:23:04 +0000 (11:23 +0300)]
net: dsa: bcm_sf2: potential array overflow in bcm_sf2_sw_suspend()
[ Upstream commit
8d6ea932856c7087ce8c3d0e79494b7d5386f962 ]
The value of ->num_ports comes from bcm_sf2_sw_probe() and it is less
than or equal to DSA_MAX_PORTS. The ds->ports[] array is used inside
the dsa_is_user_port() and dsa_is_cpu_port() functions. The ds->ports[]
array is allocated in dsa_switch_alloc() and it has ds->num_ports
elements so this leads to a static checker warning about a potential out
of bounds read.
Fixes:
8cfa94984c9c ("net: dsa: bcm_sf2: add suspend/resume callbacks")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bill Kuzeja [Tue, 12 Feb 2019 14:29:50 +0000 (09:29 -0500)]
scsi: qla2xxx: Fix panic from use after free in qla2x00_async_tm_cmd
[ Upstream commit
388a49959ee4e4e99f160241d9599efa62cd4299 ]
In qla2x00_async_tm_cmd, we reference off sp after it has been freed. This
caused a panic on a system running a slub debug kernel. Since fcport is
passed in anyways, just use that instead.
Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com>
Acked-by: Giridhar Malavali <gmalavali@marvell.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Tue, 12 Feb 2019 23:36:03 +0000 (15:36 -0800)]
Revert "mm: use early_pfn_to_nid in page_ext_init"
[ Upstream commit
2f1ee0913ce58efe7f18fbd518bd54c598559b89 ]
This reverts commit
fe53ca54270a ("mm: use early_pfn_to_nid in
page_ext_init").
When booting a system with "page_owner=on",
start_kernel
page_ext_init
invoke_init_callbacks
init_section_page_ext
init_page_owner
init_early_allocated_pages
init_zones_in_node
init_pages_in_zone
lookup_page_ext
page_to_nid
The issue here is that page_to_nid() will not work since some page flags
have no node information until later in page_alloc_init_late() due to
DEFERRED_STRUCT_PAGE_INIT. Hence, it could trigger an out-of-bounds
access with an invalid nid.
UBSAN: Undefined behaviour in ./include/linux/mm.h:1104:50
index 7 is out of range for type 'zone [5]'
Also, kernel will panic since flags were poisoned earlier with,
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_NODE_NOT_IN_PAGE_FLAGS=n
start_kernel
setup_arch
pagetable_init
paging_init
sparse_init
sparse_init_nid
memblock_alloc_try_nid_raw
It did not handle it well in init_pages_in_zone() which ends up calling
page_to_nid().
page:
ffffea0004200000 is uninitialized and poisoned
raw:
ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
raw:
ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
page_owner info is not active (free page?)
kernel BUG at include/linux/mm.h:990!
RIP: 0010:init_page_owner+0x486/0x520
This means that assumptions behind commit
fe53ca54270a ("mm: use
early_pfn_to_nid in page_ext_init") are incomplete. Therefore, revert
the commit for now. A proper way to move the page_owner initialization
to sooner is to hook into memmap initialization.
Link: http://lkml.kernel.org/r/20190115202812.75820-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu Zhao [Tue, 12 Feb 2019 23:35:58 +0000 (15:35 -0800)]
mm/gup: fix gup_pmd_range() for dax
[ Upstream commit
414fd080d125408cb15d04ff4907e1dd8145c8c7 ]
For dax pmd, pmd_trans_huge() returns false but pmd_huge() returns true
on x86. So the function works as long as hugetlb is configured.
However, dax doesn't depend on hugetlb.
Link: http://lkml.kernel.org/r/20190111034033.601-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Keith Busch <keith.busch@intel.com>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benjamin Coddington [Wed, 6 Feb 2019 11:09:43 +0000 (06:09 -0500)]
NFS: Don't use page_file_mapping after removing the page
[ Upstream commit
d2ceb7e57086750ea6198a31fd942d98099a0786 ]
If nfs_page_async_flush() removes the page from the mapping, then we can't
use page_file_mapping() on it as nfs_updatepate() is wont to do when
receiving an error. Instead, push the mapping to the stack before the page
is possibly truncated.
Fixes:
8fc75bed96bb ("NFS: Fix up return value on fatal errors in nfs_page_async_flush()")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicolas Morey-Chaisemartin [Tue, 5 Feb 2019 17:21:02 +0000 (18:21 +0100)]
xprtrdma: Make sure Send CQ is allocated on an existing compvec
[ Upstream commit
a4cb5bdb754afe21f3e9e7164213e8600cf69427 ]
Make sure the device has at least 2 completion vectors
before allocating to compvec#1
Fixes:
a4699f5647f3 (xprtrdma: Put Send CQ in IB_POLL_WORKQUEUE mode)
Signed-off-by: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yufen Yu [Tue, 29 Jan 2019 08:34:04 +0000 (16:34 +0800)]
floppy: check_events callback should not return a negative number
[ Upstream commit
96d7cb932e826219ec41ac02e5af037ffae6098c ]
floppy_check_events() is supposed to return bit flags to say which
events occured. We should return zero to say that no event flags are
set. Only BIT(0) and BIT(1) are used in the caller. And .check_events
interface also expect to return an unsigned int value.
However, after commit
a0c80efe5956, it may return -EINTR (-4u).
Here, both BIT(0) and BIT(1) are cleared. So this patch shouldn't
affect runtime, but it obviously is still worth fixing.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
a0c80efe5956 ("floppy: fix lock_fdc() signal handling")
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrea Claudi [Mon, 11 Feb 2019 15:14:39 +0000 (16:14 +0100)]
ipvs: fix dependency on nf_defrag_ipv6
[ Upstream commit
098e13f5b21d3398065fce8780f07a3ef62f4812 ]
ipvs relies on nf_defrag_ipv6 module to manage IPv6 fragmentation,
but lacks proper Kconfig dependencies and does not explicitly
request defrag features.
As a result, if netfilter hooks are not loaded, when IPv6 fragmented
packet are handled by ipvs only the first fragment makes through.
Fix it properly declaring the dependency on Kconfig and registering
netfilter hooks on ip_vs_add_service() and ip_vs_new_dest().
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jianchao Wang [Tue, 12 Feb 2019 01:56:25 +0000 (09:56 +0800)]
blk-mq: insert rq with DONTPREP to hctx dispatch list when requeue
[ Upstream commit
aef1897cd36dcf5e296f1d2bae7e0d268561b685 ]
When requeue, if RQF_DONTPREP, rq has contained some driver
specific data, so insert it to hctx dispatch list to avoid any
merge. Take scsi as example, here is the trace event log (no
io scheduler, because RQF_STARTED would prevent merging),
kworker/0:1H-339 [000] ...1 2037.209289: block_rq_insert: 8,0 R 4096 () 32768 + 8 [kworker/0:1H]
scsi_inert_test-1987 [000] .... 2037.220465: block_bio_queue: 8,0 R 32776 + 8 [scsi_inert_test]
scsi_inert_test-1987 [000] ...2 2037.220466: block_bio_backmerge: 8,0 R 32776 + 8 [scsi_inert_test]
kworker/0:1H-339 [000] .... 2047.220913: block_rq_issue: 8,0 R 8192 () 32768 + 16 [kworker/0:1H]
scsi_inert_test-1996 [000] ..s1 2047.221007: block_rq_complete: 8,0 R () 32768 + 8 [0]
scsi_inert_test-1996 [000] .Ns1 2047.221045: block_rq_requeue: 8,0 R () 32776 + 8 [0]
kworker/0:1H-339 [000] ...1 2047.221054: block_rq_insert: 8,0 R 4096 () 32776 + 8 [kworker/0:1H]
kworker/0:1H-339 [000] ...1 2047.221056: block_rq_issue: 8,0 R 4096 () 32776 + 8 [kworker/0:1H]
scsi_inert_test-1986 [000] ..s1 2047.221119: block_rq_complete: 8,0 R () 32776 + 8 [0]
(32768 + 8) was requeued by scsi_queue_insert and had RQF_DONTPREP.
Then it was merged with (32776 + 8) and issued. Due to RQF_DONTPREP,
the sdb only contained the part of (32768 + 8), then only that part
was completed. The lucky thing was that scsi_io_completion detected
it and requeued the remaining part. So we didn't get corrupted data.
However, the requeue of (32776 + 8) is not expected.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Francesco Ruggeri [Sun, 10 Feb 2019 19:58:29 +0000 (11:58 -0800)]
netfilter: compat: initialize all fields in xt_init
[ Upstream commit
8d29d16d21342a0c86405d46de0c4ac5daf1760f ]
If a non zero value happens to be in xt[NFPROTO_BRIDGE].cur at init
time, the following panic can be caused by running
% ebtables -t broute -F BROUTING
from a 32-bit user level on a 64-bit kernel. This patch replaces
kmalloc_array with kcalloc when allocating xt.
[ 474.680846] BUG: unable to handle kernel paging request at
0000000009600920
[ 474.687869] PGD
2037006067 P4D
2037006067 PUD
2038938067 PMD 0
[ 474.693838] Oops: 0000 [#1] SMP
[ 474.697055] CPU: 9 PID: 4662 Comm: ebtables Kdump: loaded Not tainted 4.19.17-
11302235.AroraKernelnext.fc18.x86_64 #1
[ 474.707721] Hardware name: Supermicro X9DRT/X9DRT, BIOS 3.0 06/28/2013
[ 474.714313] RIP: 0010:xt_compat_calc_jump+0x2f/0x63 [x_tables]
[ 474.720201] Code: 40 0f b6 ff 55 31 c0 48 6b ff 70 48 03 3d dc 45 00 00 48 89 e5 8b 4f 6c 4c 8b 47 60 ff c9 39 c8 7f 2f 8d 14 08 d1 fa 48 63 fa <41> 39 34 f8 4c 8d 0c fd 00 00 00 00 73 05 8d 42 01 eb e1 76 05 8d
[ 474.739023] RSP: 0018:
ffffc9000943fc58 EFLAGS:
00010207
[ 474.744296] RAX:
0000000000000000 RBX:
ffffc90006465000 RCX:
0000000002580249
[ 474.751485] RDX:
00000000012c0124 RSI:
fffffffff7be17e9 RDI:
00000000012c0124
[ 474.758670] RBP:
ffffc9000943fc58 R08:
0000000000000000 R09:
ffffffff8117cf8f
[ 474.765855] R10:
ffffc90006477000 R11:
0000000000000000 R12:
0000000000000001
[ 474.773048] R13:
0000000000000000 R14:
ffffc9000943fcb8 R15:
ffffc9000943fcb8
[ 474.780234] FS:
0000000000000000(0000) GS:
ffff88a03f840000(0063) knlGS:
00000000f7ac7700
[ 474.788612] CS: 0010 DS: 002b ES: 002b CR0:
0000000080050033
[ 474.794632] CR2:
0000000009600920 CR3:
0000002037422006 CR4:
00000000000606e0
[ 474.802052] Call Trace:
[ 474.804789] compat_do_replace+0x1fb/0x2a3 [ebtables]
[ 474.810105] compat_do_ebt_set_ctl+0x69/0xe6 [ebtables]
[ 474.815605] ? try_module_get+0x37/0x42
[ 474.819716] compat_nf_setsockopt+0x4f/0x6d
[ 474.824172] compat_ip_setsockopt+0x7e/0x8c
[ 474.828641] compat_raw_setsockopt+0x16/0x3a
[ 474.833220] compat_sock_common_setsockopt+0x1d/0x24
[ 474.838458] __compat_sys_setsockopt+0x17e/0x1b1
[ 474.843343] ? __check_object_size+0x76/0x19a
[ 474.847960] __ia32_compat_sys_socketcall+0x1cb/0x25b
[ 474.853276] do_fast_syscall_32+0xaf/0xf6
[ 474.857548] entry_SYSENTER_compat+0x6b/0x7a
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilan Peer [Wed, 6 Feb 2019 11:17:21 +0000 (13:17 +0200)]
mac80211: Fix Tx aggregation session tear down with ITXQs
[ Upstream commit
6157ca0d6bfe437691b1e98a62e2efe12b6714da ]
When mac80211 requests the low level driver to stop an ongoing
Tx aggregation, the low level driver is expected to call
ieee80211_stop_tx_ba_cb_irqsafe() to indicate that it is ready
to stop the session. The callback in turn schedules a worker
to complete the session tear down, which in turn also handles
the relevant state for the intermediate Tx queue.
However, as this flow in asynchronous, the intermediate queue
should be stopped and not continue servicing frames, as in
such a case frames that are dequeued would be marked as part
of an aggregation, although the aggregation is already been
stopped.
Fix this by stopping the intermediate Tx queue, before
calling the low level driver to stop the Tx aggregation.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Wed, 6 Feb 2019 11:17:12 +0000 (13:17 +0200)]
mac80211: call drv_ibss_join() on restart
[ Upstream commit
4926b51bfaa6d36bd6f398fb7698679d3962e19d ]
If a driver does any significant activity in its ibss_join method,
then it will very well expect that to be called during restart,
before any stations are added. Do that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Torokhov [Thu, 7 Feb 2019 22:39:40 +0000 (14:39 -0800)]
Input: matrix_keypad - use flush_delayed_work()
[ Upstream commit
a342083abe576db43594a32d458a61fa81f7cb32 ]
We should be using flush_delayed_work() instead of flush_work() in
matrix_keypad_stop() to ensure that we are not missing work that is
scheduled but not yet put in the workqueue (i.e. its delay timer has not
expired yet).
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Torokhov [Thu, 7 Feb 2019 22:22:42 +0000 (14:22 -0800)]
Input: ps2-gpio - flush TX work when closing port
[ Upstream commit
33a841ce5cef4ca6c18ad333248b6d273f54c839 ]
To ensure that TX work is not running after serio port has been torn down,
let's flush it when closing the port.
Reported-by: Sven Van Asbroeck <thesven73@gmail.com>
Acked-by: Danilo Krummrich <danilokrummrich@dk-develop.de>
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Torokhov [Tue, 5 Feb 2019 21:52:26 +0000 (13:52 -0800)]
Input: cap11xx - switch to using set_brightness_blocking()
[ Upstream commit
628442880af8c201d307a45f3862a7a17df8a189 ]
Updating LED state requires access to regmap and therefore we may sleep,
so we could not do that directly form set_brightness() method.
Historically we used private work to adjust the brightness, but with the
introduction of set_brightness_blocking() we no longer need it.
As a bonus, not having our own work item means we do not have
use-after-free issue as we neglected to cancel outstanding work on
driver unbind.
Reported-by: Sven Van Asbroeck <thesven73@gmail.com>
Reviewed-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell King [Wed, 12 Dec 2018 11:49:47 +0000 (11:49 +0000)]
ARM: OMAP2+: fix lack of timer interrupts on CPU1 after hotplug
[ Upstream commit
50d6b3cf9403879911e06d69c7ef41e43f8f7b4b ]
If we have a kernel configured for periodic timer interrupts, and we
have cpuidle enabled, then we end up with CPU1 losing timer interupts
after a hotplug.
This can manifest itself in RCU stall warnings, or userspace becoming
unresponsive.
The problem is that the kernel initially wants to use the TWD timer
for interrupts, but the TWD loses context when we enter the C3 cpuidle
state. Nothing reprograms the TWD after idle.
We have solved this in the past by switching to broadcast timer ticks,
and cpuidle44xx switches to that mode at boot time. However, there is
nothing to switch from periodic mode local timers after a hotplug
operation.
We call tick_broadcast_enter() in omap_enter_idle_coupled(), which one
would expect would take care of the issue, but internally this only
deals with one-shot local timers - tick_broadcast_enable() on the other
hand only deals with periodic local timers. So, we need to call both.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[tony@atomide.com: just standardized the subject line]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sylwester Nawrocki [Thu, 7 Feb 2019 14:20:41 +0000 (15:20 +0100)]
ASoC: samsung: Prevent clk_get_rate() calls in atomic context
[ Upstream commit
860b454c2c0cbda6892954f5cdbbb48931b3c8db ]
This patch moves clk_get_rate() call from trigger() to hw_params()
callback to avoid calling sleeping clk API from atomic context
and prevent deadlock as indicated below.
Before this change clk_get_rate() was being called with same
spinlock held as the one passed to the clk API when registering
clocks exposed by the I2S driver.
[ 82.109780] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908
[ 82.117009] in_atomic(): 1, irqs_disabled(): 128, pid: 1554, name: speaker-test
[ 82.124235] 3 locks held by speaker-test/1554:
[ 82.128653] #0:
cc8c5328 (snd_pcm_link_rwlock){...-}, at: snd_pcm_stream_lock_irq+0x20/0x38
[ 82.137058] #1:
ec9eda17 (&(&substream->self_group.lock)->rlock){..-.}, at: snd_pcm_ioctl+0x900/0x1268
[ 82.146417] #2:
6ac279bf (&(&pri_dai->spinlock)->rlock){..-.}, at: i2s_trigger+0x64/0x6d4
[ 82.154650] irq event stamp: 8144
[ 82.157949] hardirqs last enabled at (8143): [<
c0a0f574>] _raw_read_unlock_irq+0x24/0x5c
[ 82.166089] hardirqs last disabled at (8144): [<
c0a0f6a8>] _raw_read_lock_irq+0x18/0x58
[ 82.174063] softirqs last enabled at (8004): [<
c01024e4>] __do_softirq+0x3a4/0x66c
[ 82.181688] softirqs last disabled at (7997): [<
c012d730>] irq_exit+0x140/0x168
[ 82.188964] Preemption disabled at:
[ 82.188967] [<
00000000>] (null)
[ 82.195728] CPU: 6 PID: 1554 Comm: speaker-test Not tainted 5.0.0-rc5-00192-ga6e6caca8f03 #191
[ 82.204302] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 82.210376] [<
c0111a54>] (unwind_backtrace) from [<
c010d8f4>] (show_stack+0x10/0x14)
[ 82.218084] [<
c010d8f4>] (show_stack) from [<
c09ef004>] (dump_stack+0x90/0xc8)
[ 82.225278] [<
c09ef004>] (dump_stack) from [<
c0152980>] (___might_sleep+0x22c/0x2c8)
[ 82.232990] [<
c0152980>] (___might_sleep) from [<
c0a0a2e4>] (__mutex_lock+0x28/0xa3c)
[ 82.240788] [<
c0a0a2e4>] (__mutex_lock) from [<
c0a0ad80>] (mutex_lock_nested+0x1c/0x24)
[ 82.248763] [<
c0a0ad80>] (mutex_lock_nested) from [<
c04923dc>] (clk_prepare_lock+0x78/0xec)
[ 82.257079] [<
c04923dc>] (clk_prepare_lock) from [<
c049538c>] (clk_core_get_rate+0xc/0x5c)
[ 82.265309] [<
c049538c>] (clk_core_get_rate) from [<
c0766b18>] (i2s_trigger+0x490/0x6d4)
[ 82.273369] [<
c0766b18>] (i2s_trigger) from [<
c074fec4>] (soc_pcm_trigger+0x100/0x140)
[ 82.281254] [<
c074fec4>] (soc_pcm_trigger) from [<
c07378a0>] (snd_pcm_do_start+0x2c/0x30)
[ 82.289400] [<
c07378a0>] (snd_pcm_do_start) from [<
c07376cc>] (snd_pcm_action_single+0x38/0x78)
[ 82.298065] [<
c07376cc>] (snd_pcm_action_single) from [<
c073a450>] (snd_pcm_ioctl+0x910/0x1268)
[ 82.306734] [<
c073a450>] (snd_pcm_ioctl) from [<
c0292344>] (do_vfs_ioctl+0x90/0x9ec)
[ 82.314443] [<
c0292344>] (do_vfs_ioctl) from [<
c0292cd4>] (ksys_ioctl+0x34/0x60)
[ 82.321808] [<
c0292cd4>] (ksys_ioctl) from [<
c0101000>] (ret_fast_syscall+0x0/0x28)
[ 82.329431] Exception stack(0xeb875fa8 to 0xeb875ff0)
[ 82.334459] 5fa0:
00033c18 b6e31000 00000004 00004142 00033d80 00033d80
[ 82.342605] 5fc0:
00033c18 b6e31000 00008000 00000036 00008000 00000000 beea38a8 00008000
[ 82.350748] 5fe0:
b6e3142c beea384c b6da9a30 b6c9212c
[ 82.355789]
[ 82.357245] ======================================================
[ 82.363397] WARNING: possible circular locking dependency detected
[ 82.369551] 5.0.0-rc5-00192-ga6e6caca8f03 #191 Tainted: G W
[ 82.376395] ------------------------------------------------------
[ 82.382548] speaker-test/1554 is trying to acquire lock:
[ 82.387834]
6d2007f4 (prepare_lock){+.+.}, at: clk_prepare_lock+0x78/0xec
[ 82.394593]
[ 82.394593] but task is already holding lock:
[ 82.400398]
6ac279bf (&(&pri_dai->spinlock)->rlock){..-.}, at: i2s_trigger+0x64/0x6d4
[ 82.408197]
[ 82.408197] which lock already depends on the new lock.
[ 82.416343]
[ 82.416343] the existing dependency chain (in reverse order) is:
[ 82.423795]
[ 82.423795] -> #1 (&(&pri_dai->spinlock)->rlock){..-.}:
[ 82.430472] clk_mux_set_parent+0x34/0xb8
[ 82.434975] clk_core_set_parent_nolock+0x1c4/0x52c
[ 82.440347] clk_set_parent+0x38/0x6c
[ 82.444509] of_clk_set_defaults+0xc8/0x308
[ 82.449186] of_clk_add_provider+0x84/0xd0
[ 82.453779] samsung_i2s_probe+0x408/0x5f8
[ 82.458376] platform_drv_probe+0x48/0x98
[ 82.462879] really_probe+0x224/0x3f4
[ 82.467037] driver_probe_device+0x70/0x1c4
[ 82.471716] bus_for_each_drv+0x44/0x8c
[ 82.476049] __device_attach+0xa0/0x138
[ 82.480382] bus_probe_device+0x88/0x90
[ 82.484715] deferred_probe_work_func+0x6c/0xbc
[ 82.489741] process_one_work+0x200/0x740
[ 82.494246] worker_thread+0x2c/0x4c8
[ 82.498408] kthread+0x128/0x164
[ 82.502131] ret_from_fork+0x14/0x20
[ 82.506204] (null)
[ 82.508976]
[ 82.508976] -> #0 (prepare_lock){+.+.}:
[ 82.514264] __mutex_lock+0x60/0xa3c
[ 82.518336] mutex_lock_nested+0x1c/0x24
[ 82.522756] clk_prepare_lock+0x78/0xec
[ 82.527088] clk_core_get_rate+0xc/0x5c
[ 82.531421] i2s_trigger+0x490/0x6d4
[ 82.535494] soc_pcm_trigger+0x100/0x140
[ 82.539913] snd_pcm_do_start+0x2c/0x30
[ 82.544246] snd_pcm_action_single+0x38/0x78
[ 82.549012] snd_pcm_ioctl+0x910/0x1268
[ 82.553345] do_vfs_ioctl+0x90/0x9ec
[ 82.557417] ksys_ioctl+0x34/0x60
[ 82.561229] ret_fast_syscall+0x0/0x28
[ 82.565477] 0xbeea384c
[ 82.568421]
[ 82.568421] other info that might help us debug this:
[ 82.568421]
[ 82.576394] Possible unsafe locking scenario:
[ 82.576394]
[ 82.582285] CPU0 CPU1
[ 82.586792] ---- ----
[ 82.591297] lock(&(&pri_dai->spinlock)->rlock);
[ 82.595977] lock(prepare_lock);
[ 82.601782] lock(&(&pri_dai->spinlock)->rlock);
[ 82.608975] lock(prepare_lock);
[ 82.612268]
[ 82.612268] *** DEADLOCK ***
Fixes:
647d04f8e07a ("ASoC: samsung: i2s: Ensure the RCLK rate is properly determined")
Reported-by: Krzysztof Kozłowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Morse [Thu, 24 Jan 2019 16:32:54 +0000 (16:32 +0000)]
KVM: arm64: Forbid kprobing of the VHE world-switch code
[ Upstream commit
7d82602909ed9c73b34ad26f05d10db4850a4f8c ]
On systems with VHE the kernel and KVM's world-switch code run at the
same exception level. Code that is only used on a VHE system does not
need to be annotated as __hyp_text as it can reside anywhere in the
kernel text.
__hyp_text was also used to prevent kprobes from patching breakpoint
instructions into this region, as this code runs at a different
exception level. While this is no longer true with VHE, KVM still
switches VBAR_EL1, meaning a kprobe's breakpoint executed in the
world-switch code will cause a hyp-panic.
echo "p:weasel sysreg_save_guest_state_vhe" > /sys/kernel/debug/tracing/kprobe_events
echo 1 > /sys/kernel/debug/tracing/events/kprobes/weasel/enable
lkvm run -k /boot/Image --console serial -p "console=ttyS0 earlycon=uart,mmio,0x3f8"
# lkvm run -k /boot/Image -m 384 -c 3 --name guest-1474
Info: Placing fdt at 0x8fe00000 - 0x8fffffff
Info: virtio-mmio.devices=0x200@0x10000:36
Info: virtio-mmio.devices=0x200@0x10200:37
Info: virtio-mmio.devices=0x200@0x10400:38
[ 614.178186] Kernel panic - not syncing: HYP panic:
[ 614.178186] PS:
404003c9 PC:
ffff0000100d70e0 ESR:
f2000004
[ 614.178186] FAR:
0000000080080000 HPFAR:
0000000000800800 PAR:
1d00007edbadc0de
[ 614.178186] VCPU:
00000000f8de32f1
[ 614.178383] CPU: 2 PID: 1482 Comm: kvm-vcpu-0 Not tainted 5.0.0-rc2 #10799
[ 614.178446] Call trace:
[ 614.178480] dump_backtrace+0x0/0x148
[ 614.178567] show_stack+0x24/0x30
[ 614.178658] dump_stack+0x90/0xb4
[ 614.178710] panic+0x13c/0x2d8
[ 614.178793] hyp_panic+0xac/0xd8
[ 614.178880] kvm_vcpu_run_vhe+0x9c/0xe0
[ 614.178958] kvm_arch_vcpu_ioctl_run+0x454/0x798
[ 614.179038] kvm_vcpu_ioctl+0x360/0x898
[ 614.179087] do_vfs_ioctl+0xc4/0x858
[ 614.179174] ksys_ioctl+0x84/0xb8
[ 614.179261] __arm64_sys_ioctl+0x28/0x38
[ 614.179348] el0_svc_common+0x94/0x108
[ 614.179401] el0_svc_handler+0x38/0x78
[ 614.179487] el0_svc+0x8/0xc
[ 614.179558] SMP: stopping secondary CPUs
[ 614.179661] Kernel Offset: disabled
[ 614.179695] CPU features: 0x003,
2a80aa38
[ 614.179758] Memory Limit: none
[ 614.179858] ---[ end Kernel panic - not syncing: HYP panic:
[ 614.179858] PS:
404003c9 PC:
ffff0000100d70e0 ESR:
f2000004
[ 614.179858] FAR:
0000000080080000 HPFAR:
0000000000800800 PAR:
1d00007edbadc0de
[ 614.179858] VCPU:
00000000f8de32f1 ]---
Annotate the VHE world-switch functions that aren't marked
__hyp_text using NOKPROBE_SYMBOL().
Signed-off-by: James Morse <james.morse@arm.com>
Fixes:
3f5c90b890ac ("KVM: arm64: Introduce VHE-specific kvm_vcpu_run")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoffer Dall [Thu, 10 Jan 2019 14:33:52 +0000 (15:33 +0100)]
KVM: arm/arm64: vgic: Always initialize the group of private IRQs
[ Upstream commit
ab2d5eb03dbb7b37a1c6356686fb48626ab0c93e ]
We currently initialize the group of private IRQs during
kvm_vgic_vcpu_init, and the value of the group depends on the GIC model
we are emulating. However, CPUs created before creating (and
initializing) the VGIC might end up with the wrong group if the VGIC
is created as GICv3 later.
Since we have no enforced ordering of creating the VGIC and creating
VCPUs, we can end up with part the VCPUs being properly intialized and
the remaining incorrectly initialized. That also means that we have no
single place to do the per-cpu data structure initialization which
depends on knowing the emulated GIC model (which is only the group
field).
This patch removes the incorrect comment from kvm_vgic_vcpu_init and
initializes the group of all previously created VCPUs's private
interrupts in vgic_init in addition to the existing initialization in
kvm_vgic_vcpu_init.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marc Zyngier [Thu, 20 Dec 2018 13:07:40 +0000 (13:07 +0000)]
arm/arm64: KVM: Don't panic on failure to properly reset system registers
[ Upstream commit
20589c8cc47dce5854c8bf1b44a9fc63d798d26d ]
Failing to properly reset system registers is pretty bad. But not
quite as bad as bringing the whole machine down... So warn loudly,
but slightly more gracefully.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marc Zyngier [Thu, 20 Dec 2018 11:36:07 +0000 (11:36 +0000)]
arm/arm64: KVM: Allow a VCPU to fully reset itself
[ Upstream commit
358b28f09f0ab074d781df72b8a671edb1547789 ]
The current kvm_psci_vcpu_on implementation will directly try to
manipulate the state of the VCPU to reset it. However, since this is
not done on the thread that runs the VCPU, we can end up in a strangely
corrupted state when the source and target VCPUs are running at the same
time.
Fix this by factoring out all reset logic from the PSCI implementation
and forwarding the required information along with a request to the
target VCPU.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoffer Dall [Thu, 20 Dec 2018 11:44:05 +0000 (12:44 +0100)]
KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded
[ Upstream commit
e761a927bc9a7ee6ceb7c4f63d5922dbced87f0d ]
We have two ways to reset a vcpu:
- either through VCPU_INIT
- or through a PSCI_ON call
The first one is easy to reason about. The second one is implemented
in a more bizarre way, as it is the vcpu that handles PSCI_ON that
resets the vcpu that is being powered-on. As we need to turn the logic
around and have the target vcpu to reset itself, we must take some
preliminary steps.
Resetting the VCPU state modifies the system register state in memory,
but this may interact with vcpu_load/vcpu_put if running with preemption
disabled, which in turn may lead to corrupted system register state.
Address this by disabling preemption and doing put/load if required
around the reset logic.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuninori Morimoto [Tue, 5 Feb 2019 00:46:43 +0000 (09:46 +0900)]
ASoC: rsnd: fixup rsnd_ssi_master_clk_start() user count check
[ Upstream commit
d9111d36024de07784f2e1ba2ccf70b16035f378 ]
commit
4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set
under non-atomic") added new rsnd_ssi_prepare() and moved
rsnd_ssi_master_clk_start() to .prepare.
But, ssi user count (= ssi->usrcnt) is incremented at .init
(= rsnd_ssi_init()).
Because of these timing exchange, ssi->usrcnt check at
rsnd_ssi_master_clk_start() should be adjusted.
Otherwise, 2nd master clock setup will be no check.
This patch fixup this issue.
Fixes: commit
4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic")
Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Reported-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Tue, 5 Feb 2019 16:22:27 +0000 (10:22 -0600)]
ASoC: dapm: fix out-of-bounds accesses to DAPM lookup tables
[ Upstream commit
c16e12010060c6c7a31f08b4a99513064cb53b7d ]
KASAN reports and additional traces point to out-of-bounds accesses to
the dapm_up_seq and dapm_down_seq lookup tables. The indices used are
larger than the array definition.
Fix by adding missing entries for the new widget types in these two
lookup tables, and align them with PGA values.
Also the sequences for the following widgets were not defined. Since
their values defaulted to zero, assign them explicitly
snd_soc_dapm_input
snd_soc_dapm_output
snd_soc_dapm_vmid
snd_soc_dapm_siggen
snd_soc_dapm_sink
Fixes:
8a70b4544ef4 ('ASoC: dapm: Add new widget type for constructing DAPM graphs on DSPs.').
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yizhuo [Sat, 26 Jan 2019 06:32:20 +0000 (22:32 -0800)]
ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized
[ Upstream commit
dc30e70391376ba3987aeb856ae6d9c0706534f1 ]
In function omap4_dsi_mux_pads(), local variable "reg" could
be uninitialized if function regmap_read() returns -EINVAL.
However, it will be used directly in the later context, which
is potentially unsafe.
Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Tue, 22 Jan 2019 16:21:01 +0000 (08:21 -0800)]
ARM: dts: Configure clock parent for pwm vibra
[ Upstream commit
0840242e887586268f665bf58d5e1a7d6ebf35ed ]
Commit
84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc") moved some omap4 timers to probe with ti-sysc
interconnect target module. Turns out this broke pwm-omap-dmtimer
for reparenting of the timer clock.
With ti-sysc, we can now configure the clock sources in the dts with
assigned-clocks and assigned-clock-parents.
Fixes:
84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc")
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paweł Chmiel [Mon, 28 Jan 2019 19:13:34 +0000 (11:13 -0800)]
Input: pwm-vibra - stop regulator after disabling pwm, not before
[ Upstream commit
94803aef3533676194c772383472636c453e3147 ]
This patch fixes order of disable calls in pwm_vibrator_stop.
Currently when starting device, we first enable vcc regulator and then
setup and enable pwm. When stopping, we should do this in oposite order,
so first disable pwm and then disable regulator.
Previously order was the same as in start.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Bakker [Mon, 28 Jan 2019 19:13:01 +0000 (11:13 -0800)]
Input: pwm-vibra - prevent unbalanced regulator
[ Upstream commit
3ca232df9921f083c3b37ba5fbc76f4d9046268b ]
pwm_vibrator_stop disables the regulator, but it can be called from
multiple places, even when the regulator is already disabled. Fix this
by using regulator_is_enabled check when starting and stopping device.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Haberland [Wed, 21 Nov 2018 11:39:47 +0000 (12:39 +0100)]
s390/dasd: fix using offset into zero size array error
[ Upstream commit
4a8ef6999bce998fa5813023a9a6b56eea329dba ]
Dan Carpenter reported the following:
The patch
52898025cf7d: "[S390] dasd: security and PSF update patch
for EMC CKD ioctl" from Mar 8, 2010, leads to the following static
checker warning:
drivers/s390/block/dasd_eckd.c:4486 dasd_symm_io()
error: using offset into zero size array 'psf_data[]'
drivers/s390/block/dasd_eckd.c
4458 /* Copy parms from caller */
4459 rc = -EFAULT;
4460 if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
^^^^^^^
The user can specify any "usrparm.psf_data_len". They choose zero by
mistake.
4461 goto out;
4462 if (is_compat_task()) {
4463 /* Make sure pointers are sane even on 31 bit. */
4464 rc = -EINVAL;
4465 if ((usrparm.psf_data >> 32) != 0)
4466 goto out;
4467 if ((usrparm.rssd_result >> 32) != 0)
4468 goto out;
4469 usrparm.psf_data &= 0x7fffffffULL;
4470 usrparm.rssd_result &= 0x7fffffffULL;
4471 }
4472 /* alloc I/O data area */
4473 psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL
| GFP_DMA);
4474 rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL
| GFP_DMA);
4475 if (!psf_data || !rssd_result) {
kzalloc() returns a ZERO_SIZE_PTR (0x16).
4476 rc = -ENOMEM;
4477 goto out_free;
4478 }
4479
4480 /* get syscall header from user space */
4481 rc = -EFAULT;
4482 if (copy_from_user(psf_data,
4483 (void __user *)(unsigned long)
usrparm.psf_data,
4484 usrparm.psf_data_len))
That all works great.
4485 goto out_free;
4486 psf0 = psf_data[0];
4487 psf1 = psf_data[1];
But now we're assuming that "->psf_data_len" was at least 2 bytes.
Fix this by checking the user specified length psf_data_len.
Fixes:
52898025cf7d ("[S390] dasd: security and PSF update patch for EMC CKD ioctl")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Enric Balletbo i Serra [Sat, 26 Jan 2019 10:37:28 +0000 (11:37 +0100)]
arm64: dts: rockchip: fix graph_port warning on rk3399 bob kevin and excavator
[ Upstream commit
26cd8657c7e745686a4c54a5cccf721ede208a25 ]
Ports are described by child 'port' nodes contained in the device node.
'ports' is optional and is used to group all 'port' nodes which is not
the case here.
This patch fixes the following warnings:
arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts:25.9-29.5: Warning (graph_port): /edp-panel/ports: graph port node name should be 'port'
arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts:46.9-50.5: Warningi (graph_port): /edp-panel/ports: graph port node name should be 'port'
arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts:94.9-98.5: Warning (graph_port): /edp-panel/ports: graph port node name should be 'port'
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Julien Thierry [Mon, 7 Jan 2019 15:06:16 +0000 (15:06 +0000)]
KVM: arm/arm64: vgic: Make vgic_dist->lpi_list_lock a raw_spinlock
[ Upstream commit
fc3bc475231e12e9c0142f60100cf84d077c79e1 ]
vgic_dist->lpi_list_lock must always be taken with interrupts disabled as
it is used in interrupt context.
For configurations such as PREEMPT_RT_FULL, this means that it should
be a raw_spinlock since RT spinlocks are interruptible.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Tue, 22 Jan 2019 17:03:08 +0000 (09:03 -0800)]
clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting
[ Upstream commit
983a5a43ec254cd5ddf3254db80ca96e8f8bb2a4 ]
Commit
84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc") moved some omap4 timers to probe with ti-sysc
interconnect target module. Turns out this broke pwm-omap-dmtimer
where we now try to reparent the clock to itself with the following:
omap_dm_timer_of_set_source: failed to set parent
With ti-sysc, we can now configure the clock sources in the dts
with assigned-clocks and assigned-clock-parents. So we should be able
to remove omap_dm_timer_of_set_source with clean-up patches later on.
But for now, let's just fix it first by checking if parent and fck
are the same and bail out of so.
Fixes:
84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc")
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-By: Andreas Kemnade <andreas@kemnade.info>
Tested-By: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shuming Fan [Tue, 22 Jan 2019 07:50:09 +0000 (15:50 +0800)]
ASoC: rt5682: Correct the setting while select ASRC clk for AD/DA filter
[ Upstream commit
8077ec011b1ea26abb7ca786f28ecccfb352717f ]
AD/DA ASRC function control two ASRC clock sources separately.
Whether AD/DA filter select which clock source, we enable AD/DA ASRC
function for all cases.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steve Longerbeam [Wed, 17 Oct 2018 00:31:40 +0000 (17:31 -0700)]
gpu: ipu-v3: Fix CSI offsets for imx53
[ Upstream commit
bb867d219fda7fbaabea3314702474c4eac2b91d ]
The CSI offsets are wrong for both CSI0 and CSI1. They are at
physical address 0x1e030000 and 0x1e038000 respectively.
Fixes:
2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Julia Lawall [Sun, 13 Jan 2019 08:47:42 +0000 (09:47 +0100)]
drm/imx: imx-ldb: add missing of_node_puts
[ Upstream commit
aa3312012f103f91f123600bbf768b11c8f431bc ]
The device node iterators perform an of_node_get on each
iteration, so a jump out of the loop requires an of_node_put.
Move the initialization channel->child = child; down to just
before the call to imx_ldb_register so that intervening failures
don't need to clear it. Add a label at the end of the function to
do all the of_node_puts.
The semantic patch that finds part of this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@
for_each_child_of_node(root, child) {
... when != of_node_put(child)
when != e = child
(
return child;
|
* return ...;
)
...
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Shiyan [Thu, 20 Dec 2018 08:06:38 +0000 (11:06 +0300)]
gpu: ipu-v3: Fix i.MX51 CSI control registers offset
[ Upstream commit
2c0408dd0d8906b26fe8023889af7adf5e68b2c2 ]
The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative
to the control module registers on IPUv3EX.
This patch fixes wrong values for i.MX51 CSI0/CSI1.
Fixes:
2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Philipp Zabel [Mon, 5 Nov 2018 15:36:07 +0000 (16:36 +0100)]
drm/imx: ignore plane updates on disabled crtcs
[ Upstream commit
4fb873c9648e383206e0a91cef9b03aa54066aca ]
This patch fixes backtraces like the following when sending SIGKILL to a
process with a currently pending plane update:
[drm:ipu_plane_atomic_check] CRTC should be enabled
[drm:drm_framebuffer_remove] *ERROR* failed to commit
------------[ cut here ]------------
WARNING: CPU: 3 PID: 63 at drivers/gpu/drm/drm_framebuffer.c:926 drm_framebuffer_remove+0x47c/0x498
atomic remove_fb failed with -22
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Zhijie [Wed, 13 Feb 2019 08:24:39 +0000 (16:24 +0800)]
crypto: rockchip - update new iv to device in multiple operations
commit
c1c214adcb56d36433480c8fedf772498e7e539c upstream.
For chain mode in cipher(eg. AES-CBC/DES-CBC), the iv is continuously
updated in the operation. The new iv value should be written to device
register by software.
Reported-by: Eric Biggers <ebiggers@google.com>
Fixes:
433cd2c617bf ("crypto: rockchip - add crypto driver for rk3288")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Zhang Zhijie <zhangzj@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhang Zhijie [Wed, 13 Feb 2019 08:24:38 +0000 (16:24 +0800)]
crypto: rockchip - fix scatterlist nents error
commit
4359669a087633132203c52d67dd8c31e09e7b2e upstream.
In some cases, the nents of src scatterlist is different from
dst scatterlist. So two variables are used to handle the nents
of src&dst scatterlist.
Reported-by: Eric Biggers <ebiggers@google.com>
Fixes:
433cd2c617bf ("crypto: rockchip - add crypto driver for rk3288")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Zhang Zhijie <zhangzj@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 1 Feb 2019 07:51:41 +0000 (23:51 -0800)]
crypto: ahash - fix another early termination in hash walk
commit
77568e535af7c4f97eaef1e555bf0af83772456c upstream.
Hash algorithms with an alignmask set, e.g. "xcbc(aes-aesni)" and
"michael_mic", fail the improved hash tests because they sometimes
produce the wrong digest. The bug is that in the case where a
scatterlist element crosses pages, not all the data is actually hashed
because the scatterlist walk terminates too early. This happens because
the 'nbytes' variable in crypto_hash_walk_done() is assigned the number
of bytes remaining in the page, then later interpreted as the number of
bytes remaining in the scatterlist element. Fix it.
Fixes:
900a081f6912 ("crypto: ahash - Fix early termination in hash walk")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 4 Jan 2019 04:16:11 +0000 (20:16 -0800)]
crypto: cfb - remove bogus memcpy() with src == dest
commit
6c2e322b3621dc8be72e5c86d4fdb587434ba625 upstream.
The memcpy() in crypto_cfb_decrypt_inplace() uses walk->iv as both the
source and destination, which has undefined behavior. It is unneeded
because walk->iv is already used to hold the previous ciphertext block;
thus, walk->iv is already updated to its final value. So, remove it.
Also, note that in-place decryption is the only case where the previous
ciphertext block is not directly available. Therefore, as a related
cleanup I also updated crypto_cfb_encrypt_segment() to directly use the
previous ciphertext block rather than save it into walk->iv. This makes
it consistent with in-place encryption and out-of-place decryption; now
only in-place decryption is different, because it has to be.
Fixes:
a7d85e06ed80 ("crypto: cfb - add support for Cipher FeedBack mode")
Cc: <stable@vger.kernel.org> # v4.17+
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 4 Jan 2019 04:16:10 +0000 (20:16 -0800)]
crypto: cfb - add missing 'chunksize' property
commit
394a9e044702e6a8958a5e89d2a291605a587a2a upstream.
Like some other block cipher mode implementations, the CFB
implementation assumes that while walking through the scatterlist, a
partial block does not occur until the end. But the walk is incorrectly
being done with a blocksize of 1, as 'cra_blocksize' is set to 1 (since
CFB is a stream cipher) but no 'chunksize' is set. This bug causes
incorrect encryption/decryption for some scatterlist layouts.
Fix it by setting the 'chunksize'. Also extend the CFB test vectors to
cover this bug as well as cases where the message length is not a
multiple of the block size.
Fixes:
a7d85e06ed80 ("crypto: cfb - add support for Cipher FeedBack mode")
Cc: <stable@vger.kernel.org> # v4.17+
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gilad Ben-Yossef [Tue, 15 Jan 2019 13:43:17 +0000 (15:43 +0200)]
crypto: ccree - don't copy zero size ciphertext
commit
2b5ac17463dcb2411fed506edcf259a89bb538ba upstream.
For decryption in CBC mode we need to save the last ciphertext block
for use as the next IV. However, we were trying to do this also with
zero sized ciphertext resulting in a panic.
Fix this by only doing the copy if the ciphertext length is at least
of IV size.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gilad Ben-Yossef [Tue, 15 Jan 2019 13:43:15 +0000 (15:43 +0200)]
crypto: ccree - unmap buffer before copying IV
commit
c139c72e2beb3e3db5148910b3962b7322e24374 upstream.
We were copying the last ciphertext block into the IV field
for CBC before removing the DMA mapping of the output buffer
with the result of the buffer sometime being out-of-sync cache
wise and were getting intermittent cases of bad output IV.
Fix it by moving the DMA buffer unmapping before the copy.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Fixes:
00904aa0cd59 ("crypto: ccree - fix iv handling")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hadar Gat [Tue, 15 Jan 2019 13:43:13 +0000 (15:43 +0200)]
crypto: ccree - fix free of unallocated mlli buffer
commit
a49411959ea6d4915a9fd2a7eb5ba220e6284e9a upstream.
In cc_unmap_aead_request(), call dma_pool_free() for mlli buffer only
if an item is allocated from the pool and not always if there is a
pool allocated.
This fixes a kernel panic when trying to free a non-allocated item.
Cc: stable@vger.kernel.org
Signed-off-by: Hadar Gat <hadar.gat@arm.com>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Horia Geantă [Sat, 26 Jan 2019 18:02:15 +0000 (20:02 +0200)]
crypto: caam - fix DMA mapping of stack memory
commit
c19650d6ea99bcd903d3e55dd61860026c701339 upstream.
Roland reports the following issue and provides a root cause analysis:
"On a v4.19 i.MX6 system with IMA and CONFIG_DMA_API_DEBUG enabled, a
warning is generated when accessing files on a filesystem for which IMA
measurement is enabled:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:1181 check_for_stack.part.9+0xd0/0x120
caam_jr 2101000.jr0: DMA-API: device driver maps memory from stack [addr=
b668049e]
Modules linked in:
CPU: 0 PID: 1 Comm: switch_root Not tainted 4.19.0-
20181214-1 #2
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<
c010efb8>] (dump_backtrace) from [<
c010f2d0>] (show_stack+0x20/0x24)
[<
c010f2b0>] (show_stack) from [<
c08b04f4>] (dump_stack+0xa0/0xcc)
[<
c08b0454>] (dump_stack) from [<
c012b610>] (__warn+0xf0/0x108)
[<
c012b520>] (__warn) from [<
c012b680>] (warn_slowpath_fmt+0x58/0x74)
[<
c012b62c>] (warn_slowpath_fmt) from [<
c0199acc>] (check_for_stack.part.9+0xd0/0x120)
[<
c01999fc>] (check_for_stack.part.9) from [<
c019a040>] (debug_dma_map_page+0x144/0x174)
[<
c0199efc>] (debug_dma_map_page) from [<
c065f7f4>] (ahash_final_ctx+0x5b4/0xcf0)
[<
c065f240>] (ahash_final_ctx) from [<
c065b3c4>] (ahash_final+0x1c/0x20)
[<
c065b3a8>] (ahash_final) from [<
c03fe278>] (crypto_ahash_op+0x38/0x80)
[<
c03fe240>] (crypto_ahash_op) from [<
c03fe2e0>] (crypto_ahash_final+0x20/0x24)
[<
c03fe2c0>] (crypto_ahash_final) from [<
c03f19a8>] (ima_calc_file_hash+0x29c/0xa40)
[<
c03f170c>] (ima_calc_file_hash) from [<
c03f2b24>] (ima_collect_measurement+0x1dc/0x240)
[<
c03f2948>] (ima_collect_measurement) from [<
c03f0a60>] (process_measurement+0x4c4/0x6b8)
[<
c03f059c>] (process_measurement) from [<
c03f0cdc>] (ima_file_check+0x88/0xa4)
[<
c03f0c54>] (ima_file_check) from [<
c02d8adc>] (path_openat+0x5d8/0x1364)
[<
c02d8504>] (path_openat) from [<
c02dad24>] (do_filp_open+0x84/0xf0)
[<
c02daca0>] (do_filp_open) from [<
c02cf50c>] (do_open_execat+0x84/0x1b0)
[<
c02cf488>] (do_open_execat) from [<
c02d1058>] (__do_execve_file+0x43c/0x890)
[<
c02d0c1c>] (__do_execve_file) from [<
c02d1770>] (sys_execve+0x44/0x4c)
[<
c02d172c>] (sys_execve) from [<
c0101000>] (ret_fast_syscall+0x0/0x28)
---[ end trace
3455789a10e3aefd ]---
The cause is that the struct ahash_request *req is created as a
stack-local variable up in the stack (presumably somewhere in the IMA
implementation), then passed down into the CAAM driver, which tries to
dma_single_map the req->result (indirectly via map_seq_out_ptr_result)
in order to make that buffer available for the CAAM to store the result
of the following hash operation.
The calling code doesn't know how req will be used by the CAAM driver,
and there could be other such occurrences where stack memory is passed
down to the CAAM driver. Therefore we should rather fix this issue in
the CAAM driver where the requirements are known."
Fix this problem by:
-instructing the crypto engine to write the final hash in state->caam_ctx
-subsequently memcpy-ing the final hash into req->result
Cc: <stable@vger.kernel.org> # v4.19+
Reported-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pankaj Gupta [Fri, 1 Feb 2019 07:18:20 +0000 (07:18 +0000)]
crypto: caam - fixed handling of sg list
commit
42e95d1f10dcf8b18b1d7f52f7068985b3dc5b79 upstream.
when the source sg contains more than 1 fragment and
destination sg contains 1 fragment, the caam driver
mishandle the buffers to be sent to caam.
Fixes:
f2147b88b2b1 ("crypto: caam - Convert GCM to new AEAD interface")
Cc: <stable@vger.kernel.org> # 4.2+
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Arun Pathak <arun.pathak@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo A. R. Silva [Mon, 11 Feb 2019 18:31:31 +0000 (12:31 -0600)]
crypto: ccree - fix missing break in switch statement
commit
b5be853181a8d4a6e20f2073ccd273d6280cad88 upstream.
Add missing break statement in order to prevent the code from falling
through to case S_DIN_to_DES.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes:
63ee04c8b491 ("crypto: ccree - add skcipher support")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Franck LENORMAND [Tue, 19 Feb 2019 14:56:55 +0000 (16:56 +0200)]
crypto: caam - fix hash context DMA unmap size
commit
65055e2108847af5e577cc7ce6bde45ea136d29a upstream.
When driver started using state->caam_ctxt for storing both running hash
and final hash, it was not updated to handle different DMA unmap
lengths.
Cc: <stable@vger.kernel.org> # v4.19+
Fixes:
c19650d6ea99 ("crypto: caam - fix DMA mapping of stack memory")
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhi Jin [Thu, 6 Sep 2018 07:22:10 +0000 (15:22 +0800)]
stm class: Fix an endless loop in channel allocation
commit
a1d75dad3a2c689e70a1c4e0214cca9de741d0aa upstream.
There is a bug in the channel allocation logic that leads to an endless
loop when looking for a contiguous range of channels in a range with a
mixture of free and occupied channels. For example, opening three
consequtive channels, closing the first two and requesting 4 channels in
a row will trigger this soft lockup. The bug is that the search loop
forgets to skip over the range once it detects that one channel in that
range is occupied.
Restore the original intent to the logic by fixing the omission.
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes:
7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices")
CC: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Usyskin [Mon, 25 Feb 2019 09:09:28 +0000 (11:09 +0200)]
mei: bus: move hw module get/put to probe/release
commit
b5958faa34e2f99f3475ad89c52d98dfea079d33 upstream.
Fix unbalanced module reference counting during internal reset, which
prevents the drivers unloading.
Tracking mei_me/txe modules on mei client bus via
mei_cldev_enable/disable is error prone due to possible internal
reset flow, where clients are disconnected underneath.
Moving reference counting to probe and release of mei bus client
driver solves this issue in simplest way, as each client provides only
a single connection to a client bus driver.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Usyskin [Wed, 20 Feb 2019 14:55:37 +0000 (16:55 +0200)]
mei: hbm: clean the feature flags on link reset
commit
37fd0b623023484ef6df79ed46f21f06ecc611ff upstream.
The list of supported functions can be altered upon link reset,
clean the flags to allow correct selections of supported
features.
Cc: <stable@vger.kernel.org> v4.19+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Fri, 8 Feb 2019 23:39:27 +0000 (00:39 +0100)]
iio: adc: exynos-adc: Fix NULL pointer exception on unbind
commit
2ea8bab4dd2a9014e723b28091831fa850b82d83 upstream.
Fix NULL pointer exception on device unbind when device tree does not
contain "has-touchscreen" property. In such case the input device is
not registered so it should not be unregistered.
$ echo "
12d10000.adc" > /sys/bus/platform/drivers/exynos-adc/unbind
Unable to handle kernel NULL pointer dereference at virtual address
00000474
...
(input_unregister_device) from [<
c0772060>] (exynos_adc_remove+0x20/0x80)
(exynos_adc_remove) from [<
c0587d5c>] (platform_drv_remove+0x20/0x40)
(platform_drv_remove) from [<
c05860f0>] (device_release_driver_internal+0xdc/0x1ac)
(device_release_driver_internal) from [<
c0583ecc>] (unbind_store+0x60/0xd4)
(unbind_store) from [<
c031b89c>] (kernfs_fop_write+0x100/0x1e0)
(kernfs_fop_write) from [<
c029709c>] (__vfs_write+0x2c/0x17c)
(__vfs_write) from [<
c0297374>] (vfs_write+0xa4/0x184)
(vfs_write) from [<
c0297594>] (ksys_write+0x4c/0xac)
(ksys_write) from [<
c0101000>] (ret_fast_syscall+0x0/0x28)
Fixes:
2bb8ad9b44c5 ("iio: exynos-adc: add experimental touchscreen support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Codrin Ciubotariu [Tue, 19 Feb 2019 16:29:28 +0000 (16:29 +0000)]
ASoC: codecs: pcm186x: Fix energysense SLEEP bit
commit
05bd7fcdd06b19a10f069af1bea3ad9abac038d7 upstream.
The ADCs are sleeping when the SLEEP bit is set and running when it's
cleared, so the bit should be inverted.
Tested on pcm1863.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Codrin Ciubotariu [Tue, 19 Feb 2019 16:29:12 +0000 (16:29 +0000)]
ASoC: codecs: pcm186x: fix wrong usage of DECLARE_TLV_DB_SCALE()
commit
fcf4daabf08079e6d09958a2992e7446ef8d0438 upstream.
According to DS, the gain is between -12 dB and 40 dB, with a 0.5 dB step.
Tested on pcm1863.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
S.j. Wang [Mon, 18 Feb 2019 08:29:11 +0000 (08:29 +0000)]
ASoC: fsl_esai: fix register setting issue in RIGHT_J mode
commit
cc29ea007347f39f4c5a4d27b0b555955a0277f9 upstream.
The ESAI_xCR_xWA is xCR's bit, not the xCCR's bit, driver set it to
wrong register, correct it.
Fixes
43d24e76b698 ("ASoC: fsl_esai: Add ESAI CPU DAI driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Ackedy-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zhengbin [Wed, 13 Mar 2019 08:01:37 +0000 (16:01 +0800)]
9p/net: fix memory leak in p9_client_create
commit
bb06c388fa20ae24cfe80c52488de718a7e3a53f upstream.
If msize is less than 4096, we should close and put trans, destroy
tagpool, not just free client. This patch fixes that.
Link: http://lkml.kernel.org/m/1552464097-142659-1-git-send-email-zhengbin13@huawei.com
Cc: stable@vger.kernel.org
Fixes:
574d356b7a02 ("9p/net: put a lower bound on msize")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hou Tao [Thu, 24 Jan 2019 06:35:13 +0000 (14:35 +0800)]
9p: use inode->i_lock to protect i_size_write() under 32-bit
commit
5e3cc1ee1405a7eb3487ed24f786dec01b4cbe1f upstream.
Use inode->i_lock to protect i_size_write(), else i_size_read() in
generic_fillattr() may loop infinitely in read_seqcount_begin() when
multiple processes invoke v9fs_vfs_getattr() or v9fs_vfs_getattr_dotl()
simultaneously under 32-bit SMP environment, and a soft lockup will be
triggered as show below:
watchdog: BUG: soft lockup - CPU#5 stuck for 22s! [stat:2217]
Modules linked in:
CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
Hardware name: Generic DT based system
PC is at generic_fillattr+0x104/0x108
LR is at 0xec497f00
pc : [<
802b8898>] lr : [<
ec497f00>] psr:
200c0013
sp :
ec497e20 ip :
ed608030 fp :
ec497e3c
r10:
00000000 r9 :
ec497f00 r8 :
ed608030
r7 :
ec497ebc r6 :
ec497f00 r5 :
ee5c1550 r4 :
ee005780
r3 :
0000052d r2 :
00000000 r1 :
ec497f00 r0 :
ed608030
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control:
10c5387d Table:
ac48006a DAC:
00000051
CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
Hardware name: Generic DT based system
Backtrace:
[<
8010d974>] (dump_backtrace) from [<
8010dc88>] (show_stack+0x20/0x24)
[<
8010dc68>] (show_stack) from [<
80a1d194>] (dump_stack+0xb0/0xdc)
[<
80a1d0e4>] (dump_stack) from [<
80109f34>] (show_regs+0x1c/0x20)
[<
80109f18>] (show_regs) from [<
801d0a80>] (watchdog_timer_fn+0x280/0x2f8)
[<
801d0800>] (watchdog_timer_fn) from [<
80198658>] (__hrtimer_run_queues+0x18c/0x380)
[<
801984cc>] (__hrtimer_run_queues) from [<
80198e60>] (hrtimer_run_queues+0xb8/0xf0)
[<
80198da8>] (hrtimer_run_queues) from [<
801973e8>] (run_local_timers+0x28/0x64)
[<
801973c0>] (run_local_timers) from [<
80197460>] (update_process_times+0x3c/0x6c)
[<
80197424>] (update_process_times) from [<
801ab2b8>] (tick_nohz_handler+0xe0/0x1bc)
[<
801ab1d8>] (tick_nohz_handler) from [<
80843050>] (arch_timer_handler_virt+0x38/0x48)
[<
80843018>] (arch_timer_handler_virt) from [<
80180a64>] (handle_percpu_devid_irq+0x8c/0x240)
[<
801809d8>] (handle_percpu_devid_irq) from [<
8017ac20>] (generic_handle_irq+0x34/0x44)
[<
8017abec>] (generic_handle_irq) from [<
8017b344>] (__handle_domain_irq+0x6c/0xc4)
[<
8017b2d8>] (__handle_domain_irq) from [<
801022e0>] (gic_handle_irq+0x4c/0x88)
[<
80102294>] (gic_handle_irq) from [<
80101a30>] (__irq_svc+0x70/0x98)
[<
802b8794>] (generic_fillattr) from [<
8056b284>] (v9fs_vfs_getattr_dotl+0x74/0xa4)
[<
8056b210>] (v9fs_vfs_getattr_dotl) from [<
802b8904>] (vfs_getattr_nosec+0x68/0x7c)
[<
802b889c>] (vfs_getattr_nosec) from [<
802b895c>] (vfs_getattr+0x44/0x48)
[<
802b8918>] (vfs_getattr) from [<
802b8a74>] (vfs_statx+0x9c/0xec)
[<
802b89d8>] (vfs_statx) from [<
802b9428>] (sys_lstat64+0x48/0x78)
[<
802b93e0>] (sys_lstat64) from [<
80101000>] (ret_fast_syscall+0x0/0x28)
[dominique.martinet@cea.fr: updated comment to not refer to a function
in another subsystem]
Link: http://lkml.kernel.org/r/20190124063514.8571-2-houtao1@huawei.com
Cc: stable@vger.kernel.org
Fixes:
7549ae3e81cc ("9p: Use the i_size_[read, write]() macros instead of using inode->i_size directly.")
Reported-by: Xing Gaopeng <xingaopeng@huawei.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Mon, 19 Nov 2018 15:33:44 +0000 (10:33 -0500)]
media: videobuf2-v4l2: drop WARN_ON in vb2_warn_zero_bytesused()
commit
5e99456c20f712dcc13d9f6ca4278937d5367355 upstream.
Userspace shouldn't set bytesused to 0 for output buffers.
vb2_warn_zero_bytesused() warns about this (only once!), but it also
calls WARN_ON(1), which is confusing since it is not immediately clear
that it warns about a 0 value for bytesused.
Just drop the WARN_ON as it serves no purpose.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Matthias Maennich <maennich@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 19 Mar 2019 12:12:42 +0000 (13:12 +0100)]
Linux 4.19.30
Zha Bin [Tue, 8 Jan 2019 08:07:03 +0000 (16:07 +0800)]
vhost/vsock: fix vhost vsock cid hashing inconsistent
commit
7fbe078c37aba3088359c9256c1a1d0c3e39ee81 upstream.
The vsock core only supports 32bit CID, but the Virtio-vsock spec define
CID (dst_cid and src_cid) as u64 and the upper 32bits is reserved as
zero. This inconsistency causes one bug in vhost vsock driver. The
scenarios is:
0. A hash table (vhost_vsock_hash) is used to map an CID to a vsock
object. And hash_min() is used to compute the hash key. hash_min() is
defined as:
(sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits)).
That means the hash algorithm has dependency on the size of macro
argument 'val'.
0. In function vhost_vsock_set_cid(), a 64bit CID is passed to
hash_min() to compute the hash key when inserting a vsock object into
the hash table.
0. In function vhost_vsock_get(), a 32bit CID is passed to hash_min()
to compute the hash key when looking up a vsock for an CID.
Because the different size of the CID, hash_min() returns different hash
key, thus fails to look up the vsock object for an CID.
To fix this bug, we keep CID as u64 in the IOCTLs and virtio message
headers, but explicitly convert u64 to u32 when deal with the hash table
and vsock core.
Fixes:
834e772c8db0 ("vhost/vsock: fix use-after-free in network stack callers")
Link: https://github.com/stefanha/virtio/blob/vsock/trunk/content.tex
Signed-off-by: Zha Bin <zhabin@linux.alibaba.com>
Reviewed-by: Liu Jiang <gerry@linux.alibaba.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Shengjing Zhu <i@zhsj.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>