Evgeny Novikov [Fri, 9 Jul 2021 14:45:29 +0000 (17:45 +0300)]
mtd: spi-nor: hisi-sfc: Remove excessive clk_disable_unprepare()
[ Upstream commit
78e4d342187625585932bb437ec26e1060f7fc6f ]
hisi_spi_nor_probe() invokes clk_disable_unprepare() on all paths after
successful call of clk_prepare_enable(). Besides, the clock is enabled by
hispi_spi_nor_prep() and disabled by hispi_spi_nor_unprep(). So at remove
time it is not possible to have the clock enabled. The patch removes
excessive clk_disable_unprepare() from hisi_spi_nor_remove().
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: e523f11141bd ("mtd: spi-nor: add hisilicon spi-nor flash controller driver")
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20210709144529.31379-1-novikov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guido Günther [Mon, 11 Oct 2021 13:41:23 +0000 (15:41 +0200)]
drm/bridge: nwl-dsi: Add atomic_get_input_bus_fmts
[ Upstream commit
2f1495fac8d38bfade18bd7e31fa787cd7815626 ]
Components further up in the chain might ask us for supported formats.
Without this MEDIA_BUS_FMT_FIXED is assumed which then breaks display
output with mxsfb since it can't determine a proper bus format.
We handle the bus formats that correspond to the DSI formats the bridge
can potentially output (see chapter 13.6 of the i.MX 8MQ reference
manual) - which matches what xsfb can input.
Fixes: b776b0f00f24 ("drm: mxsfb: Use bus_format from the nearest bridge if present")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1712f2b952694fd4484dfd8576fbc5b4d7adf042.1633959458.git.agx@sigxcpu.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Keeping [Wed, 6 Oct 2021 18:06:03 +0000 (11:06 -0700)]
Input: st1232 - increase "wait ready" timeout
[ Upstream commit
2667f6b7af99e81958fa97c03bb519fcb09d0055 ]
I have a ST1633 touch controller which fails to probe due to a timeout
waiting for the controller to become ready. Increasing the minimum
delay to 100ms ensures that the probe sequence completes successfully.
The ST1633 datasheet says nothing about the maximum delay here and the
ST1232 I2C protocol document says "wait until" with no notion of a
timeout.
Since this only runs once during probe, being generous with the timout
seems reasonable and most likely the device will become ready
eventually.
(It may be worth noting that I saw this issue with a PREEMPT_RT patched
kernel which probably has tighter wakeups from usleep_range() than other
preemption models.)
Fixes: f605be6a57b4 ("Input: st1232 - wait until device is ready before reading resolution")
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210929152609.2421483-1-john@metanate.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia-Ju Bai [Tue, 9 Mar 2021 08:00:20 +0000 (00:00 -0800)]
fs: orangefs: fix error return code of orangefs_revalidate_lookup()
[ Upstream commit
4c2b46c824a78fc8190d8eafaaea5a9078fe7479 ]
When op_alloc() returns NULL to new_op, no error return code of
orangefs_revalidate_lookup() is assigned.
To fix this bug, ret is assigned with -ENOMEM in this case.
Fixes: 8bb8aefd5afb ("OrangeFS: Change almost all instances of the string PVFS2 to OrangeFS.")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Thu, 23 Sep 2021 21:54:18 +0000 (14:54 -0700)]
sparc: Add missing "FORCE" target when using if_changed
[ Upstream commit
a3c7ca2b141b9735eb383246e966a4f4322e3e65 ]
Fix observed warning:
/builds/linux/arch/sparc/boot/Makefile:35: FORCE prerequisite is missing
Fixes: e1f86d7b4b2a ("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and filechk")
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Mon, 4 Oct 2021 19:44:16 +0000 (15:44 -0400)]
NFS: Fix deadlocks in nfs_scan_commit_list()
[ Upstream commit
64a93dbf25d3a1368bb58ddf0f61d0a92d7479e3 ]
Partially revert commit
2ce209c42c01 ("NFS: Wait for requests that are
locked on the commit list"), since it can lead to deadlocks between
commit requests and nfs_join_page_group().
For now we should assume that any locked requests on the commit list are
either about to be removed and committed by another task, or the writes
they describe are about to be retransmitted. In either case, we should
not need to worry.
Fixes: 2ce209c42c01 ("NFS: Wait for requests that are locked on the commit list")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Fri, 8 Oct 2021 07:46:52 +0000 (15:46 +0800)]
opp: Fix return in _opp_add_static_v2()
[ Upstream commit
27ff8187f13ecfec8a26fb1928e906f46f326cc5 ]
Fix sparse warning:
drivers/opp/of.c:924 _opp_add_static_v2() warn: passing zero to 'ERR_PTR'
For duplicate OPPs 'ret' be set to zero.
Fixes: deac8703da5f ("PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Tue, 5 Oct 2021 18:09:43 +0000 (20:09 +0200)]
PCI: aardvark: Fix preserving PCI_EXP_RTCTL_CRSSVE flag on emulated bridge
[ Upstream commit
d419052bc6c60fa4ab2b5a51d5f1e55a66e2b4ff ]
Commit
43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value") started
using CRSSVE flag for handling CRS responses.
PCI_EXP_RTCTL_CRSSVE flag is stored only in emulated config space buffer
and there is handler for PCI_EXP_RTCTL register. So every read operation
from config space automatically clears CRSSVE flag as it is not defined in
PCI_EXP_RTCTL read handler.
Fix this by reading current CRSSVE bit flag from emulated space buffer and
appending it to PCI_EXP_RTCTL read response.
Link: https://lore.kernel.org/r/20211005180952.6812-5-kabel@kernel.org
Fixes: 43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Behún [Tue, 5 Oct 2021 18:09:42 +0000 (20:09 +0200)]
PCI: aardvark: Don't spam about PIO Response Status
[ Upstream commit
464de7e7fff767e87429cd7be09c4f2cb50a6ccb ]
Use dev_dbg() instead of dev_err() in advk_pcie_check_pio_status().
For example CRS is not an error status, it just says that the request
should be retried.
Link: https://lore.kernel.org/r/20211005180952.6812-4-kabel@kernel.org
Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Xu (Hello71) [Thu, 7 Oct 2021 06:37:06 +0000 (02:37 -0400)]
drm/plane-helper: fix uninitialized variable reference
[ Upstream commit
7be28bd73f23e53d6e7f5fe891ba9503fc0c7210 ]
drivers/gpu/drm/drm_plane_helper.c: In function 'drm_primary_helper_update':
drivers/gpu/drm/drm_plane_helper.c:113:32: error: 'visible' is used uninitialized [-Werror=uninitialized]
113 | struct drm_plane_state plane_state = {
| ^~~~~~~~~~~
drivers/gpu/drm/drm_plane_helper.c:178:14: note: 'visible' was declared here
178 | bool visible;
| ^~~~~~~
cc1: all warnings being treated as errors
visible is an output, not an input. in practice this use might turn out
OK but it's still UB.
Fixes: df86af9133b4 ("drm/plane-helper: Add drm_plane_helper_check_state()")
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007063706.305984-1-alex_y_xu@yahoo.ca
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Thu, 8 Jul 2021 23:03:29 +0000 (02:03 +0300)]
drm/bridge/lontium-lt9611uxc: fix provided connector suport
[ Upstream commit
15184965783aab3ca7ee4f939e2598943b3f40f9 ]
- set DRM_CONNECTOR_POLL_HPD as the connector will generate hotplug
events on its own
- do not call drm_kms_helper_hotplug_event() unless mode_config.funcs
pointer is not NULL to remove possible kernel oops.
Fixes: bc6fa8676ebb ("drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708230329.395976-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baptiste Lepers [Mon, 6 Sep 2021 01:59:24 +0000 (11:59 +1000)]
pnfs/flexfiles: Fix misplaced barrier in nfs4_ff_layout_prepare_ds
[ Upstream commit
a2915fa06227b056a8f9b0d79b61dca08ad5cfc6 ]
_nfs4_pnfs_v3/v4_ds_connect do
some work
smp_wmb
ds->ds_clp = clp;
And nfs4_ff_layout_prepare_ds currently does
smp_rmb
if(ds->ds_clp)
...
This patch places the smp_rmb after the if. This ensures that following
reads only happen once nfs4_ff_layout_prepare_ds has checked that data
has been properly initialized.
Fixes: d67ae825a59d6 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Wed, 29 Sep 2021 12:12:53 +0000 (08:12 -0400)]
NFS: Fix dentry verifier races
[ Upstream commit
cec08f452a687fce9dfdf47946d00a1d12a8bec5 ]
If the directory changed while we were revalidating the dentry, then
don't update the dentry verifier. There is no value in setting the
verifier to an older value, and we could end up overwriting a more up to
date verifier from a parallel revalidation.
Fixes: efeda80da38d ("NFSv4: Fix revalidation of dentries with delegations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Tue, 28 Sep 2021 15:24:57 +0000 (11:24 -0400)]
NFS: Ignore the directory size when marking for revalidation
[ Upstream commit
a6a361c4ca3cc3e6f3b39d1b6bca1de90f5f4b11 ]
If we want to revalidate the directory, then just mark the change
attribute as invalid.
Fixes: 13c0b082b6a9 ("NFS: Replace use of NFS_INO_REVAL_PAGECACHE when checking cache validity")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Tue, 28 Sep 2021 15:15:53 +0000 (11:15 -0400)]
NFS: Don't set NFS_INO_DATA_INVAL_DEFER and NFS_INO_INVALID_DATA
[ Upstream commit
488796ec1e39fb9194cc8175f770823d40fbf0ed ]
NFS_INO_DATA_INVAL_DEFER and NFS_INO_INVALID_DATA should be considered
mutually exclusive.
Fixes: 1c341b777501 ("NFS: Add deferred cache invalidation for close-to-open consistency violations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Sun, 26 Sep 2021 18:05:04 +0000 (14:05 -0400)]
NFS: Default change_attr_type to NFS4_CHANGE_TYPE_IS_UNDEFINED
[ Upstream commit
eea413308f2e6deb00f061f18081a53f3ecc8cc6 ]
Both NFSv3 and NFSv2 generate their change attribute from the ctime
value that was supplied by the server. However the problem is that there
are plenty of servers out there with ctime resolutions of 1ms or worse.
In a modern performance system, this is insufficient when trying to
decide which is the most recent set of attributes when, for instance, a
READ or GETATTR call races with a WRITE or SETATTR.
For this reason, let's revert to labelling the NFSv2/v3 change
attributes as NFS4_CHANGE_TYPE_IS_UNDEFINED. This will ensure we protect
against such races.
Fixes: 7b24dacf0840 ("NFS: Another inode revalidation improvement")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kewei Xu [Fri, 17 Sep 2021 10:14:10 +0000 (18:14 +0800)]
i2c: mediatek: fixing the incorrect register offset
[ Upstream commit
b8228aea5a19d5111a7bf44f7de6749d1f5d487a ]
The reason for the modification here is that the previous
offset information is incorrect, OFFSET_DEBUGSTAT = 0xE4 is
the correct value.
Fixes: 25708278f810 ("i2c: mediatek: Add i2c support for MediaTek MT8183")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Brown [Sat, 2 Oct 2021 04:20:49 +0000 (21:20 -0700)]
Input: ariel-pwrbutton - add SPI device ID table
[ Upstream commit
5c4c2c8e6fac26fa0b80c234d6e9f75d637193af ]
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI device ID table.
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210927134104.38648-1-broonie@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Brown [Mon, 27 Sep 2021 13:02:40 +0000 (14:02 +0100)]
rtc: mcp795: Add SPI ID table
[ Upstream commit
3109151c47343c80300177ec7704e0757064efdc ]
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210927130240.33693-1-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dave Jiang [Wed, 29 Sep 2021 19:15:38 +0000 (12:15 -0700)]
dmaengine: idxd: move out percpu_ref_exit() to ensure it's outside submission
[ Upstream commit
85f604af9c83a4656b1d07bec73298c3ba7d7c1e ]
percpu_ref_tryget_live() is safe to call as long as ref is between init and
exit according to the function comment. Move percpu_ref_exit() so it is
called after the dma channel is no longer valid to ensure this holds true.
Fixes: 93a40a6d7428 ("dmaengine: idxd: add percpu_ref to descriptor submission path")
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163294293832.914350.10326422026738506152.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiner Kallweit [Sun, 5 Sep 2021 15:59:42 +0000 (17:59 +0200)]
i2c: i801: Use PCI bus rescan mutex to protect P2SB access
[ Upstream commit
7d6b61c394a42b8385858bb9e306d48a0112823c ]
As pointed out by Andy in [0] using a local mutex here isn't strictly
wrong but not sufficient. We should hold the PCI rescan lock for P2SB
operations.
[0] https://www.spinics.net/lists/linux-i2c/msg52717.html
Fixes: 1a987c69ce2c ("i2c: i801: make p2sb_spinlock a mutex")
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dong Aisheng [Fri, 10 Sep 2021 09:06:18 +0000 (17:06 +0800)]
remoteproc: imx_rproc: Fix TCM io memory type
[ Upstream commit
91bb26637353f35241f5472eedf3202ebe13e2e5 ]
is_iomem was introduced in the commit
40df0a91b2a5 ("remoteproc: add
is_iomem to da_to_va"), but the driver seemed missed to provide the io
type correctly.
This patch updates remoteproc driver to indicate the TCM on IMX are io
memories. Without the change, remoteproc kick will fail.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peng Fan <peng.fan@nxp.com>
Reviewed-and-tested-by: Peng Fan <peng.fan@nxp.com>
Fixes: 79806d32d5aa ("remoteproc: imx_rproc: support i.MX8MN/P")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210910090621.3073540-4-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Brown [Thu, 23 Sep 2021 19:49:22 +0000 (20:49 +0100)]
rtc: pcf2123: Add SPI ID table
[ Upstream commit
5f84478e14aa8b43a4ea85d2e091931741947749 ]
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210923194922.53386-4-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Brown [Thu, 23 Sep 2021 19:49:21 +0000 (20:49 +0100)]
rtc: ds1390: Add SPI ID table
[ Upstream commit
da87639d6312afb8855717c791768bf2d4ca8ac8 ]
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210923194922.53386-3-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Brown [Thu, 23 Sep 2021 19:49:20 +0000 (20:49 +0100)]
rtc: ds1302: Add SPI ID table
[ Upstream commit
8719a17613e0233d707eb22e1645d217594631ef ]
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210923194922.53386-2-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
J. Bruce Fields [Tue, 14 Sep 2021 16:30:32 +0000 (12:30 -0400)]
nfsd: don't alloc under spinlock in rpc_parse_scope_id
[ Upstream commit
9b6e27d01adcec58e046c624874f8a124e8b07ec ]
Dan Carpenter says:
The patch
d20c11d86d8f: "nfsd: Protect session creation and client
confirm using client_lock" from Jul 30, 2014, leads to the following
Smatch static checker warning:
net/sunrpc/addr.c:178 rpc_parse_scope_id()
warn: sleeping in atomic context
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: d20c11d86d8f ("nfsd: Protect session creation and client...")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Evgeny Novikov [Fri, 3 Sep 2021 08:26:53 +0000 (11:26 +0300)]
mtd: rawnand: intel: Fix potential buffer overflow in probe
[ Upstream commit
46a0dc10fb32bec3e765e51bf71fbc070dc77ca3 ]
ebu_nand_probe() read the value of u32 variable "cs" from the device
firmware description and used it as the index for array ebu_host->cs
that can contain MAX_CS (2) elements at most. That could result in
a buffer overflow and various bad consequences later.
Fix the potential buffer overflow by restricting values of "cs" with
MAX_CS in probe.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 0b1039f016e8 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Co-developed-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210903082653.16441-1-novikov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnaud Pouliquen [Mon, 12 Jul 2021 12:39:12 +0000 (14:39 +0200)]
rpmsg: Fix rpmsg_create_ept return when RPMSG config is not defined
[ Upstream commit
537d3af1bee8ad1415fda9b622d1ea6d1ae76dfa ]
According to the description of the rpmsg_create_ept in rpmsg_core.c
the function should return NULL on error.
Fixes: 2c8a57088045 ("rpmsg: Provide function stubs for API")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210712123912.10672-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tom Rix [Sun, 4 Oct 2020 14:24:22 +0000 (07:24 -0700)]
apparmor: fix error check
[ Upstream commit
d108370c644b153382632b3e5511ade575c91c86 ]
clang static analysis reports this representative problem:
label.c:1463:16: warning: Assigned value is garbage or undefined
label->hname = name;
^ ~~~~
In aa_update_label_name(), this the problem block of code
if (aa_label_acntsxprint(&name, ...) == -1)
return res;
On failure, aa_label_acntsxprint() has a more complicated return
that just -1. So check for a negative return.
It was also noted that the aa_label_acntsxprint() main comment refers
to a nonexistent parameter, so clean up the comment.
Fixes: f1bd904175e8 ("apparmor: add the base fns() for domain labels")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aharon Landau [Thu, 28 Oct 2021 05:55:22 +0000 (08:55 +0300)]
RDMA/core: Require the driver to set the IOVA correctly during rereg_mr
[ Upstream commit
f1a090f09f42be5a5542009f0be310fdb3e768fc ]
If the driver returns a new MR during rereg it has to fill it with the
IOVA from the proper source. If IB_MR_REREG_TRANS is set then the IOVA is
cmd.hca_va, otherwise the IOVA comes from the old MR. mlx5 for example has
two calls inside rereg_mr:
return create_real_mr(new_pd, umem, mr->ibmr.iova,
new_access_flags);
and
return create_real_mr(new_pd, new_umem, iova, new_access_flags);
Unconditionally overwriting the iova in the newly allocated MR will
corrupt the iova if the first path is used.
Remove the redundant initializations from ib_uverbs_rereg_mr().
Fixes: 6e0954b11c05 ("RDMA/uverbs: Allow drivers to create a new HW object during rereg_mr")
Link: https://lore.kernel.org/r/4b0a31bbc372842613286a10d7a8cbb0ee6069c7.1635400472.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sun, 31 Oct 2021 15:25:22 +0000 (16:25 +0100)]
power: supply: bq27xxx: Fix kernel crash on IRQ handler register error
[ Upstream commit
cdf10ffe8f626d8a2edc354abf063df0078b2d71 ]
When registering the IRQ handler fails, do not just return the error code,
this will free the devm_kzalloc()-ed data struct while leaving the queued
work queued and the registered power_supply registered with both of them
now pointing to free-ed memory, resulting in various kernel crashes
soon afterwards.
Instead properly tear-down things on IRQ handler register errors.
Fixes: 703df6c09795 ("power: bq27xxx_battery: Reorganize I2C into a module")
Cc: Andrew F. Davis <afd@ti.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Fri, 29 Oct 2021 09:58:16 +0000 (11:58 +0200)]
mips: cm: Convert to bitfield API to fix out-of-bounds access
[ Upstream commit
18b8f5b6fc53d097cadb94a93d8d6566ba88e389 ]
mips_cm_error_report() extracts the cause and other cause from the error
register using shifts. This works fine for the former, as it is stored
in the top bits, and the shift will thus remove all non-related bits.
However, the latter is stored in the bottom bits, hence thus needs masking
to get rid of non-related bits. Without such masking, using it as an
index into the cm2_causes[] array will lead to an out-of-bounds access,
probably causing a crash.
Fix this by using FIELD_GET() instead. Bite the bullet and convert all
MIPS CM handling to the bitfield API, to improve readability and safety.
Fixes: 3885c2b463f6a236 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Parav Pandit [Tue, 26 Oct 2021 17:55:17 +0000 (20:55 +0300)]
vdpa/mlx5: Fix clearing of VIRTIO_NET_F_MAC feature bit
[ Upstream commit
ef76eb83a17e803a66b64ac95b36ae48b3d17c22 ]
Cited patch in the fixes tag clears the features bit during reset.
mlx5 vdpa device feature bits are static decided by device capabilities.
These feature bits (including VIRTIO_NET_F_MAC) are initialized during
device addition time.
Clearing features bit in reset callback cleared the VIRTIO_NET_F_MAC. Due
to this, MAC address provided by the device is not honored.
Fix it by not clearing the static feature bits during reset.
Fixes: 0686082dbf7a ("vdpa: Add reset callback in vdpa_config_ops")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20211026175519.87795-7-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xuan Zhuo [Wed, 20 Oct 2021 11:23:23 +0000 (19:23 +0800)]
virtio_ring: check desc == NULL when using indirect with packed
[ Upstream commit
fc6d70f40b3d0b3219e2026d05be0409695f620d ]
When using indirect with packed, we don't check for allocation failures.
This patch checks that and fall back on direct.
Fixes: 1ce9e6055fa0 ("virtio_ring: introduce packed ring support")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20211020112323.67466-3-xuanzhuo@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Wed, 27 Oct 2021 07:53:26 +0000 (09:53 +0200)]
serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE
[ Upstream commit
d142585bceb3218ad432ed0fcd5be9d6e3cd9052 ]
If CONFIG_CONSOLE_POLL=y, and CONFIG_SERIAL_CPM=m (hence
CONFIG_SERIAL_CPM_CONSOLE=n):
drivers/tty/serial/cpm_uart/cpm_uart_core.c:1109:12: warning: ‘udbg_cpm_getc’ defined but not used [-Wunused-function]
1109 | static int udbg_cpm_getc(void)
| ^~~~~~~~~~~~~
drivers/tty/serial/cpm_uart/cpm_uart_core.c:1095:13: warning: ‘udbg_cpm_putc’ defined but not used [-Wunused-function]
1095 | static void udbg_cpm_putc(char c)
| ^~~~~~~~~~~~~
Fix this by making the udbg definitions depend on
CONFIG_SERIAL_CPM_CONSOLE, in addition to CONFIG_CONSOLE_POLL.
Fixes: a60526097f42eb98 ("tty: serial: cpm_uart: Add udbg support for enabling xmon")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20211027075326.3270785-1-geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Mon, 18 Oct 2021 19:44:16 +0000 (21:44 +0200)]
ASoC: rsnd: Fix an error handling path in 'rsnd_node_count()'
[ Upstream commit
173632358fde7a567f28e07c4549b959ee857986 ]
If we return before the end of the 'for_each_child_of_node()' iterator, the
reference taken on 'np' must be released.
Add the missing 'of_node_put()' call.
Fixes: c413983eb66a ("ASoC: rsnd: adjust disabled module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/4c0e893cbfa21dc76c1ede0b6f4f8cff42209299.1634586167.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yixing Liu [Fri, 29 Oct 2021 10:05:37 +0000 (18:05 +0800)]
RDMA/hns: Modify the value of MAX_LP_MSG_LEN to meet hardware compatibility
[ Upstream commit
0e60778efb072d47efc7100c4009b5bd97273b0b ]
The upper limit of MAX_LP_MSG_LEN on HIP08 is 64K, and the upper limit on
HIP09 is 16K. Regardless of whether it is HIP08 or HIP09, only 16K will be
used. In order to ensure compatibility, it is unified to 16K.
Setting MAX_LP_MSG_LEN to 16K will not cause performance loss on HIP08.
Fixes: fbed9d2be292 ("RDMA/hns: Fix configuration of ack_req_freq in QPC")
Link: https://lore.kernel.org/r/20211029100537.27299-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Haoyue Xu [Fri, 29 Oct 2021 09:58:46 +0000 (17:58 +0800)]
RDMA/hns: Fix initial arm_st of CQ
[ Upstream commit
571fb4fb78a3bf0fcadbe65eca9ca4ccee885af4 ]
We set the init CQ status to ARMED before. As a result, an unexpected CEQE
would be reported. Therefore, the init CQ status should be set to no_armed
rather than REG_NXT_CEQE.
Fixes: a5073d6054f7 ("RDMA/hns: Add eq support of hip08")
Link: https://lore.kernel.org/r/20211029095846.26732-1-liangwenpeng@huawei.com
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Fitzgerald [Thu, 28 Oct 2021 14:09:01 +0000 (15:09 +0100)]
ASoC: cs42l42: Correct configuring of switch inversion from ts-inv
[ Upstream commit
778a0cbef5fb76bf506f84938517bb77e7a1c478 ]
The setting from the cirrus,ts-inv property should be applied to the
TIP_SENSE_INV bit, as this is the one that actually affects the jack
detect block. The TS_INV bit only swaps the meaning of the PLUG and
UNPLUG interrupts and should always be 1 for the interrupts to have
the normal meaning.
Due to some misunderstanding the driver had been implemented to
configure the TS_INV bit based on the jack switch polarity. This made
the interrupts behave the correct way around, but left the jack detect
block, button detect and analogue circuits always interpreting an open
switch as unplugged.
The signal chain inside the codec is:
SENSE pin -> TIP_SENSE_INV -> TS_INV -> (invert) -> interrupts
|
v
Jack detect,
button detect and
analog control
As the TIP_SENSE_INV already performs the necessary inversion the
TS_INV bit never needs to change. It must always be 1 to yield the
expected interrupt behaviour.
Some extra confusion has arisen because of the additional invert in the
interrupt path, meaning that a value applied to the TS_INV bit produces
the opposite effect of applying it to the TIP_SENSE_INV bit. The ts-inv
property has therefore always had the opposite effect to what might be
expected (0 = inverted, 1 = not inverted). To maintain the meaning of
the ts-inv property it must be inverted when applied to TIP_SENSE_INV.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/20211028140902.11786-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Thu, 28 Oct 2021 12:59:15 +0000 (14:59 +0200)]
powerpc: Don't provide __kernel_map_pages() without ARCH_SUPPORTS_DEBUG_PAGEALLOC
[ Upstream commit
f8c0e36b48e32b14bb83332d24e0646acd31d9e9 ]
When ARCH_SUPPORTS_DEBUG_PAGEALLOC is not selected, the user can
still select CONFIG_DEBUG_PAGEALLOC in which case __kernel_map_pages()
is provided by mm/page_poison.c
So only define __kernel_map_pages() when both
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC and CONFIG_DEBUG_PAGEALLOC
are defined.
Fixes: 68b44f94d637 ("powerpc/booke: Disable STRICT_KERNEL_RWX, DEBUG_PAGEALLOC and KFENCE")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/971b69739ff4746252e711a9845210465c023a9e.1635425947.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Logan Gunthorpe [Wed, 27 Oct 2021 17:47:57 +0000 (11:47 -0600)]
iommu/dma: Fix incorrect error return on iommu deferred attach
[ Upstream commit
ac315f96b3bd6f6b8f18f387816c7c2cc6b32e02 ]
scsi_dma_map() was reporting a failure during boot on an AMD machine
with the IOMMU enabled.
scsi_dma_map failed: request for 36 bytes!
The issue was tracked down to a mistake in logic: should not return
an error if iommu_deferred_attach() returns zero.
Reported-by: Marshall Midden <marshallmidden@gmail.com>
Fixes: dabb16f67215 ("iommu/dma: return error code from iommu_dma_map_sg()")
Link: https://lore.kernel.org/all/CAD2CkAWjS8=kKwEEN4cgVNjyFORUibzEiCUA-X+SMtbo0JoMmA@mail.gmail.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20211027174757.119755-1-logang@deltatee.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Sakamoto [Thu, 28 Oct 2021 13:03:25 +0000 (22:03 +0900)]
ALSA: oxfw: fix functional regression for Mackie Onyx 1640i in v5.14 or later
[ Upstream commit
cddcd5472abb7b8a9c37ccbcf0908b79740a01b5 ]
A user reports functional regression for Mackie Onyx 1640i that the device
generates slow sound with ALSA oxfw driver which supports media clock
recovery. Although the device is based on OXFW971 ASIC, it does not
transfer isochronous packet with own event frequency as expected. The
device seems to adjust event frequency according to events in received
isochronous packets in the beginning of packet streaming. This is
unknown quirk.
This commit fixes the regression to turn the recovery off in driver
side. As a result, nominal frequency is used in duplex packet streaming
between device and driver. For stability of sampling rate in events of
transferred isochronous packet, 4,000 isochronous packets are skipped
in the beginning of packet streaming.
Reference: https://github.com/takaswie/snd-firewire-improve/issues/38
Fixes: 029ffc429440 ("ALSA: oxfw: perform sequence replay for media clock recovery")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211028130325.45772-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Denis Kirjanov [Tue, 26 Oct 2021 13:31:08 +0000 (16:31 +0300)]
powerpc/xmon: fix task state output
[ Upstream commit
b1f896ce3542eb2eede5949ee2e481526fae1108 ]
p_state is unsigned since the commit
2f064a59a11f
The patch also uses TASK_RUNNING instead of null.
Fixes: 2f064a59a11f ("sched: Change task_struct::state")
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211026133108.7113-1-kda@linux-powerpc.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bixuan Cui [Thu, 28 Oct 2021 07:28:22 +0000 (15:28 +0800)]
powerpc/44x/fsp2: add missing of_node_put
[ Upstream commit
290fe8aa69ef5c51c778c0bb33f8ef0181c769f5 ]
Early exits from for_each_compatible_node() should decrement the
node reference counter. Reported by Coccinelle:
./arch/powerpc/platforms/44x/fsp2.c:206:1-25: WARNING: Function
"for_each_compatible_node" should have of_node_put() before return
around line 218.
Fixes: 7813043e1bbc ("powerpc/44x/fsp2: Add irq error handlers")
Signed-off-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1635406102-88719-1-git-send-email-cuibixuan@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Tue, 26 Oct 2021 05:39:25 +0000 (07:39 +0200)]
powerpc/book3e: Fix set_memory_x() and set_memory_nx()
[ Upstream commit
b6cb20fdc2735f8b2e082937066c33fe376c2ee2 ]
set_memory_x() calls pte_mkexec() which sets _PAGE_EXEC.
set_memory_nx() calls pte_exprotec() which clears _PAGE_EXEC.
Book3e has 2 bits, UX and SX, which defines the exec rights
resp. for user (PR=1) and for kernel (PR=0).
_PAGE_EXEC is defined as UX only.
An executable kernel page is set with either _PAGE_KERNEL_RWX
or _PAGE_KERNEL_ROX, which both have SX set and UX cleared.
So set_memory_nx() call for an executable kernel page does
nothing because UX is already cleared.
And set_memory_x() on a non-executable kernel page makes it
executable for the user and keeps it non-executable for kernel.
Also, pte_exec() always returns 'false' on kernel pages, because
it checks _PAGE_EXEC which doesn't include SX, so for instance
the W+X check doesn't work.
To fix this:
- change tlb_low_64e.S to use _PAGE_BAP_UX instead of _PAGE_USER
- sets both UX and SX in _PAGE_EXEC so that pte_exec() returns
true whenever one of the two bits is set and pte_exprotect()
clears both bits.
- Define a book3e specific version of pte_mkexec() which sets
either SX or UX based on UR.
Fixes: 1f9ad21c3b38 ("powerpc/mm: Implement set_memory() routines")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c41100f9c144dc5b62e5a751b810190c6b5d42fd.1635226743.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Tue, 26 Oct 2021 05:39:24 +0000 (07:39 +0200)]
powerpc/nohash: Fix __ptep_set_access_flags() and ptep_set_wrprotect()
[ Upstream commit
b1b93cb7e794e914787bf7d9936b57a149cdee4f ]
Commit
26973fa5ac0e ("powerpc/mm: use pte helpers in generic code")
changed those two functions to use pte helpers to determine which
bits to clear and which bits to set.
This change was based on the assumption that bits to be set/cleared
are always the same and can be determined by applying the pte
manipulation helpers on __pte(0).
But on platforms like book3e, the bits depend on whether the page
is a user page or not.
For the time being it more or less works because of _PAGE_EXEC being
used for user pages only and exec right being set at all time on
kernel page. But following patch will clean that and output of
pte_mkexec() will depend on the page being a user or kernel page.
Instead of trying to make an even more complicated helper where bits
would become dependent on the final pte value, come back to a more
static situation like before commit
26973fa5ac0e ("powerpc/mm: use
pte helpers in generic code"), by introducing an 8xx specific
version of __ptep_set_access_flags() and ptep_set_wrprotect().
Fixes: 26973fa5ac0e ("powerpc/mm: use pte helpers in generic code")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/922bdab3a220781bae2360ff3dd5adb7fe4d34f1.1635226743.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrej Shadura [Tue, 19 Oct 2021 15:29:17 +0000 (17:29 +0200)]
HID: u2fzero: properly handle timeouts in usb_submit_urb
[ Upstream commit
43775e62c4b784f44a159e13ba80e6146a42d502 ]
The wait_for_completion_timeout function returns 0 if timed out or a
positive value if completed. Hence, "less than zero" comparison always
misses timeouts and doesn't kill the URB as it should, leading to
re-sending it while it is active.
Fixes: 42337b9d4d95 ("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrej Shadura [Tue, 19 Oct 2021 15:29:16 +0000 (17:29 +0200)]
HID: u2fzero: clarify error check and length calculations
[ Upstream commit
b7abf78b7a6c4a29a6e0ba0bb883fe44a2f3d693 ]
The previous commit fixed handling of incomplete packets but broke error
handling: offsetof returns an unsigned value (size_t), but when compared
against the signed return value, the return value is interpreted as if
it were unsigned, so negative return values are never less than the
offset.
To make the code easier to read, calculate the minimal packet length
once and separately, and assign it to a signed int variable to eliminate
unsigned math and the need for type casts. It then becomes immediately
obvious how the actual data length is calculated and why the return
value cannot be less than the minimal length.
Fixes: 22d65765f211 ("HID: u2fzero: ignore incomplete packets without data")
Fixes: 42337b9d4d95 ("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Mon, 11 Oct 2021 11:27:14 +0000 (14:27 +0300)]
clk: at91: clk-master: fix prescaler logic
[ Upstream commit
0ef99f8202c5078a72c05af76bfaed2ea4daab19 ]
When prescaler value read from register is MASTER_PRES_MAX it means
that the input clock will be divided by 3. Fix the code to reflect
this.
Fixes: 7a110b9107ed8 ("clk: at91: clk-master: re-factor master clock")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20211011112719.3951784-11-claudiu.beznea@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Mon, 11 Oct 2021 11:27:12 +0000 (14:27 +0300)]
clk: at91: clk-master: check if div or pres is zero
[ Upstream commit
c2910c00fee4cbb7b222d6e02846adef9ae4135a ]
Check if div or pres is zero before using it as argument for ffs().
In case div is zero ffs() will return 0 and thus substracting from
zero will lead to invalid values to be setup in registers.
Fixes: 7a110b9107ed8 ("clk: at91: clk-master: re-factor master clock")
Fixes: 75c88143f3b87 ("clk: at91: clk-master: add master clock support for SAMA7G5")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20211011112719.3951784-9-claudiu.beznea@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Mon, 11 Oct 2021 11:27:11 +0000 (14:27 +0300)]
clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL
[ Upstream commit
f12d028b743bb6136da60b17228a1b6162886444 ]
Use DIV_ROUND_CLOSEST_ULL() to avoid any inconsistency b/w the rate
computed in sam9x60_frac_pll_recalc_rate() and the one computed in
sam9x60_frac_pll_compute_mul_frac().
Fixes: 43b1bb4a9b3e1 ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20211011112719.3951784-8-claudiu.beznea@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anssi Hannula [Tue, 26 Oct 2021 10:27:41 +0000 (13:27 +0300)]
serial: xilinx_uartps: Fix race condition causing stuck TX
[ Upstream commit
88b20f84f0fe47409342669caf3e58a3fc64c316 ]
xilinx_uartps .start_tx() clears TXEMPTY when enabling TXEMPTY to avoid
any previous TXEVENT event asserting the UART interrupt. This clear
operation is done immediately after filling the TX FIFO.
However, if the bytes inserted by cdns_uart_handle_tx() are consumed by
the UART before the TXEMPTY is cleared, the clear operation eats the new
TXEMPTY event as well, causing cdns_uart_isr() to never receive the
TXEMPTY event. If there are bytes still queued in circbuf, TX will get
stuck as they will never get transferred to FIFO (unless new bytes are
queued to circbuf in which case .start_tx() is called again).
While the racy missed TXEMPTY occurs fairly often with short data
sequences (e.g. write 1 byte), in those cases circbuf is usually empty
so no action on TXEMPTY would have been needed anyway. On the other
hand, longer data sequences make the race much more unlikely as UART
takes longer to consume the TX FIFO. Therefore it is rare for this race
to cause visible issues in general.
Fix the race by clearing the TXEMPTY bit in ISR *before* filling the
FIFO.
The TXEMPTY bit in ISR will only get asserted at the exact moment the
TX FIFO *becomes* empty, so clearing the bit before filling FIFO does
not cause an extra immediate assertion even if the FIFO is initially
empty.
This is hard to reproduce directly on a normal system, but inserting
e.g. udelay(200) after cdns_uart_handle_tx(port), setting
4000000 baud,
and then running "dd if=/dev/zero bs=128 of=/dev/ttyPS0 count=50"
reliably reproduces the issue on my ZynqMP test system unless this fix
is applied.
Fixes: 85baf542d54e ("tty: xuartps: support 64 byte FIFO size")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Link: https://lore.kernel.org/r/20211026102741.2910441-1-anssi.hannula@bitwise.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 9 Sep 2021 07:21:49 +0000 (15:21 +0800)]
phy: Sparx5 Eth SerDes: Fix return value check in sparx5_serdes_probe()
[ Upstream commit
b4dc97ab0a629eda8bda20d96ef47dac08a505d9 ]
In case of error, the function devm_ioremap() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
Fixes: 2ff8a1eeb5aa ("phy: Add Sparx5 ethernet serdes PHY driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210909072149.2934047-1-yangyingliang@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sandeep Maheswaram [Mon, 25 Oct 2021 04:19:35 +0000 (09:49 +0530)]
phy: qcom-snps: Correct the FSEL_MASK
[ Upstream commit
b475bf0ec40a2b13fb32ef62f5706576d5858460 ]
The FSEL_MASK which selects the refclock is defined incorrectly.
It should be [4:6] not [5:7]. Due to this incorrect definition, the BIT(7)
in USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0 is reset which keeps PHY analog
blocks ON during suspend.
Fix this issue by correctly defining the FSEL_MASK.
Fixes: 51e8114f80d0 ("phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs")
Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
Link: https://lore.kernel.org/r/1635135575-5668-1-git-send-email-quic_c_sanm@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Wed, 20 Oct 2021 15:56:04 +0000 (18:56 +0300)]
phy: qcom-qmp: another fix for the sc8180x PCIe definition
[ Upstream commit
26f71abef580537d978f6299330689f029ee1e6c ]
Commit
f839f14e24f2 ("phy: qcom-qmp: Add sc8180x PCIe support") added
SC8180X PCIe tables, but used sm8250_qmp_pcie_serdes_tbl as a serdes
table because of the copy paste error. Commit
bfccd9a71a08 ("phy:
qcom-qmp: Fix sc8180x PCIe definition") corrected part of this mistake
by pointing serdes_tbl to sc8180x_qmp_pcie_serdes_tbl, however the
serdes_tbl_num field was not updated to use sc8180x table. So let's now
fix the serdes_tbl_num field too.
Fixes: bfccd9a71a08 ("phy: qcom-qmp: Fix sc8180x PCIe definition")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020155604.1374530-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 14 Sep 2021 11:00:38 +0000 (14:00 +0300)]
phy: ti: gmii-sel: check of_get_address() for failure
[ Upstream commit
8d55027f4e2c04146a75fb63371ab96ccc887f2c ]
Smatch complains that if of_get_address() returns NULL, then "size"
isn't initialized. Also it would lead to an Oops.
Fixes: 7f78322cdd67 ("phy: ti: gmii-sel: retrieve ports number and base offset from dt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20210914110038.GB11657@kili
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Zapolskiy [Wed, 22 Sep 2021 23:35:48 +0000 (02:35 +0300)]
phy: qcom-qusb2: Fix a memory leak on probe
[ Upstream commit
bf7ffcd0069d30e2e7ba2b827f08c89f471cd1f3 ]
On success nvmem_cell_read() returns a pointer to a dynamically allocated
buffer, and therefore it shall be freed after usage.
The issue is reported by kmemleak:
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff3b3803e4b280 (size 128):
comm "kworker/u16:1", pid 107, jiffies
4294892861 (age 94.120s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
000000007739afdc>] __kmalloc+0x27c/0x41c
[<
0000000071c0fbf8>] nvmem_cell_read+0x40/0xe0
[<
00000000e803ef1f>] qusb2_phy_init+0x258/0x5bc
[<
00000000fc81fcfa>] phy_init+0x70/0x110
[<
00000000e3d48a57>] dwc3_core_soft_reset+0x4c/0x234
[<
0000000027d1dbd4>] dwc3_core_init+0x68/0x990
[<
000000001965faf9>] dwc3_probe+0x4f4/0x730
[<
000000002f7617ca>] platform_probe+0x74/0xf0
[<
00000000a2576cac>] really_probe+0xc4/0x470
[<
00000000bc77f2c5>] __driver_probe_device+0x11c/0x190
[<
00000000130db71f>] driver_probe_device+0x48/0x110
[<
0000000019f36c2b>] __device_attach_driver+0xa4/0x140
[<
00000000e5812ff7>] bus_for_each_drv+0x84/0xe0
[<
00000000f4bac574>] __device_attach+0xe4/0x1c0
[<
00000000d3beb631>] device_initial_probe+0x20/0x30
[<
000000008019b9db>] bus_probe_device+0xa4/0xb0
Fixes: ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210922233548.2150244-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Brown [Mon, 25 Oct 2021 15:48:44 +0000 (16:48 +0100)]
ASoC: topology: Fix stub for snd_soc_tplg_component_remove()
[ Upstream commit
1198ff12cbdd5f42c032cba1d96ebc7af8024cf9 ]
When removing the index argument from snd_soc_topology_component_remove()
commit
a5b8f71c5477f (ASoC: topology: Remove multistep topology loading)
forgot to update the stub for !SND_SOC_TOPOLOGY use, causing build failures
for anything that tries to make use of it.
Fixes: a5b8f71c5477f (ASoC: topology: Remove multistep topology loading)
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211025154844.2342120-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rahul Tanwar [Wed, 20 Oct 2021 09:38:15 +0000 (17:38 +0800)]
pinctrl: equilibrium: Fix function addition in multiple groups
[ Upstream commit
53b3947ddb7f309d1f611f8dc9bfd6ea9d699907 ]
Ignore the same function with multiple groups.
Fix a typo in error print.
Fixes: 1948d5c51dba ("pinctrl: Add pinmux & GPIO controller driver for a new SoC")
Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com>
Link: https://lore.kernel.org/r/20211020093815.20870-1-rtanwar@maxlinear.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Zapolskiy [Mon, 11 Oct 2021 09:55:34 +0000 (12:55 +0300)]
arm64: dts: qcom: sdm845: Fix Qualcomm crypto engine bus clock
[ Upstream commit
d5240f8e23641c70bc70892d7999398b081ccb7e ]
The change corrects the described bus clock of the QCE.
Fixes: 3e482859f1ef ("dts: qcom: sdm845: Add dt entries to support crypto engine.")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211011095534.1580406-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bhupesh Sharma [Wed, 19 May 2021 14:36:50 +0000 (20:06 +0530)]
arm64: dts: qcom: sdm845: Use RPMH_CE_CLK macro directly
[ Upstream commit
eed1d9b6e36b06faa53c6dc74134ec21b1336d94 ]
In commit
3e482859f1ef ("dts: qcom: sdm845: Add dt entries
to support crypto engine."), we decided to use the value indicated
by constant RPMH_CE_CLK rather than using it directly.
Now that the same RPMH clock value might be used for other
SoCs (in addition to sdm845), let's use the constant
RPMH_CE_CLK to make sure that this dtsi is compatible with the
other qcom ones.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Link: https://lore.kernel.org/r/20210519143700.27392-8-bhupesh.sharma@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marijn Suijten [Thu, 7 Oct 2021 21:33:57 +0000 (23:33 +0200)]
arm64: dts: qcom: pmi8994: Fix "eternal"->"external" typo in WLED node
[ Upstream commit
b110dfa5ad42be93ebf73540d16430878dfb26bb ]
The property is named "qcom,external-pfet", as found by
dt_binding_check:
'qcom,eternal-pfet' does not match any of the regexes
Fixes: 37aa540cbd30 ("arm64: dts: qcom: pmi8994: Add WLED node")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007213400.258371-11-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wan Jiabing [Thu, 14 Oct 2021 08:30:17 +0000 (04:30 -0400)]
soc: qcom: apr: Add of_node_put() before return
[ Upstream commit
72f1aa6205d84337b90b065f602a8fe190821781 ]
Fix following coccicheck warning:
./drivers/soc/qcom/apr.c:485:1-23: WARNING: Function
for_each_child_of_node should have of_node_put() before return
Early exits from for_each_child_of_node should decrement the
node reference counter.
Fixes: 834735662602 ("soc: qcom: apr: Add avs/audio tracking functionality")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211014083017.19714-1-wanjiabing@vivo.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Wed, 20 Oct 2021 01:26:39 +0000 (04:26 +0300)]
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
[ Upstream commit
086f52fdc8f7bd273d06a3de2adf65a063eb5392 ]
The sm8350_mxc's domain description incorrectly references
sm8150_mmcx_ao as a peer instead of sm8350_mxc_ao. Correct this typo.
Fixes: 639c85628757 ("soc: qcom: rpmhpd: Add SM8350 power domains")
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020012639.1183806-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guru Das Srinagesh [Mon, 11 Oct 2021 20:00:14 +0000 (13:00 -0700)]
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
[ Upstream commit
38212b2a8a6fc4c3a6fa99d7445b833bedc9a67c ]
Since __qcom_scm_is_call_available() returns bool, have it return false
instead of -EINVAL if an invalid SMC convention is detected.
This fixes the Smatch static checker warning:
drivers/firmware/qcom_scm.c:255 __qcom_scm_is_call_available()
warn: signedness bug returning '(-22)'
Fixes: 9d11af8b06a8 ("firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1633982414-28347-1-git-send-email-quic_gurus@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jack Pham [Thu, 21 Oct 2021 18:01:28 +0000 (11:01 -0700)]
usb: dwc3: gadget: Skip resizing EP's TX FIFO if already resized
[ Upstream commit
876a75cb520f5869533a30a6ca01545ec817b7a0 ]
Some functions may dynamically enable and disable their endpoints
regularly throughout their operation, particularly when Set Interface
is employed to switch between Alternate Settings. For instance the
UAC2 function has its respective endpoints for playback & capture
associated with AltSetting 1, in which case those endpoints would not
get enabled until the host activates the AltSetting. And they
conversely become disabled when the interfaces' AltSetting 0 is
chosen.
With the DWC3 FIFO resizing algorithm recently added, every
usb_ep_enable() call results in a call to resize that EP's TXFIFO,
but if the same endpoint is enabled again and again, this incorrectly
leads to FIFO RAM allocation exhaustion as the mechanism did not
account for the possibility that endpoints can be re-enabled many
times.
Example log splat:
dwc3
a600000.dwc3: Fifosize(3717) > RAM size(3462) ep3in depth:
217973127
configfs-gadget gadget: u_audio_start_capture:521 Error!
dwc3
a600000.dwc3: request
000000000be13e18 was not queued to ep3in
Add another bit DWC3_EP_TXFIFO_RESIZED to dep->flags to keep track of
whether an EP had already been resized in the current configuration.
If so, bail out of dwc3_gadget_resize_tx_fifos() to avoid the
calculation error resulting from accumulating the EP's FIFO depth
repeatedly. This flag is retained across multiple ep_disable() and
ep_enable() calls and is cleared when GTXFIFOSIZn is reset in
dwc3_gadget_clear_tx_fifos() upon receiving the next Set Config.
Fixes: 9f607a309fbe9 ("usb: dwc3: Resize TX FIFOs to meet EP bursting requirements")
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20211021180129.27938-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Fri, 15 Oct 2021 10:02:42 +0000 (12:02 +0200)]
powerpc/booke: Disable STRICT_KERNEL_RWX, DEBUG_PAGEALLOC and KFENCE
[ Upstream commit
68b44f94d6370e2c6c790fedd28e637fa9964a93 ]
fsl_booke and 44x are not able to map kernel linear memory with
pages, so they can't support DEBUG_PAGEALLOC and KFENCE, and
STRICT_KERNEL_RWX is also a problem for now.
Enable those only on book3s (both 32 and 64 except KFENCE), 8xx and 40x.
Fixes: 88df6e90fa97 ("[POWERPC] DEBUG_PAGEALLOC for 32-bit")
Fixes: 95902e6c8864 ("powerpc/mm: Implement STRICT_KERNEL_RWX on PPC32")
Fixes: 90cbac0e995d ("powerpc: Enable KFENCE for PPC32")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d1ad9fdd9b27da3fdfa16510bb542ed51fa6e134.1634292136.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Amelie Delaunay [Tue, 5 Oct 2021 09:53:05 +0000 (11:53 +0200)]
usb: dwc2: drd: reset current session before setting the new one
[ Upstream commit
1ad707f559f7cb12c64f3d7cb37f0b1ea27c1058 ]
If role is changed without the "none" step, A- and B- valid session could
be set at the same time. It is an issue.
This patch resets A-session if role switch sets B-session, and resets
B-session if role switch sets A-session.
Then, it is possible to change the role without the "none" step.
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211005095305.66397-4-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Amelie Delaunay [Tue, 5 Oct 2021 09:53:04 +0000 (11:53 +0200)]
usb: dwc2: drd: fix dwc2_drd_role_sw_set when clock could be disabled
[ Upstream commit
8d387f61b0240854e81450c261beb775065bad5d ]
In case of USB_DR_MODE_PERIPHERAL, the OTG clock is disabled at the end of
the probe (it is not the case if USB_DR_MODE_HOST or USB_DR_MODE_OTG).
The clock is then enabled on udc_start.
If dwc2_drd_role_sw_set is called before udc_start (it is the case if the
usb cable is plugged at boot), GOTGCTL and GUSBCFG registers cannot be
read/written, so session cannot be overridden.
To avoid this case, check the ll_hw_enabled value and enable the clock if
it is available, and disable it after the override.
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211005095305.66397-3-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Amelie Delaunay [Tue, 5 Oct 2021 09:53:03 +0000 (11:53 +0200)]
usb: dwc2: drd: fix dwc2_force_mode call in dwc2_ovr_init
[ Upstream commit
b2cab2a24fb5d13ce1d384ecfb6de827fa08a048 ]
Instead of forcing the role to Device, check the dr_mode configuration.
If the core is Host only, force the mode to Host, this to avoid the
dwc2_force_mode warning:
WARNING: CPU: 1 PID: 21 at drivers/usb/dwc2/core.c:615 dwc2_drd_init+0x104/0x17c
When forcing mode to Host, dwc2_force_mode may sleep the time the host
role is applied. To avoid sleeping while atomic context, move the call
to dwc2_force_mode after spin_unlock_irqrestore. It is safe, as
interrupts are not yet unmasked here.
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211005095305.66397-2-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Agner [Wed, 20 Oct 2021 19:26:42 +0000 (21:26 +0200)]
serial: imx: fix detach/attach of serial console
[ Upstream commit
6d0d1b5a1b4870911beb89544ec1a9751c42fec7 ]
If the device used as a serial console gets detached/attached at runtime,
register_console() will try to call imx_uart_setup_console(), but this
is not possible since it is marked as __init.
For instance
# cat /sys/devices/virtual/tty/console/active
tty1 ttymxc0
# echo -n N > /sys/devices/virtual/tty/console/subsystem/ttymxc0/console
# echo -n Y > /sys/devices/virtual/tty/console/subsystem/ttymxc0/console
[ 73.166649] 8<--- cut here ---
[ 73.167005] Unable to handle kernel paging request at virtual address
c154d928
[ 73.167601] pgd =
55433e84
[ 73.167875] [
c154d928] *pgd=
8141941e(bad)
[ 73.168304] Internal error: Oops:
8000000d [#1] SMP ARM
[ 73.168429] Modules linked in:
[ 73.168522] CPU: 0 PID: 536 Comm: sh Not tainted
5.15.0-rc6-00056-g3968ddcf05fb #3
[ 73.168675] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 73.168791] PC is at imx_uart_console_setup+0x0/0x238
[ 73.168927] LR is at try_enable_new_console+0x98/0x124
[ 73.169056] pc : [<
c154d928>] lr : [<
c0196f44>] psr:
a0000013
[ 73.169178] sp :
c2ef5e70 ip :
00000000 fp :
00000000
[ 73.169281] r10:
00000000 r9 :
c02cf970 r8 :
00000000
[ 73.169389] r7 :
00000001 r6 :
00000001 r5 :
c1760164 r4 :
c1e0fb08
[ 73.169512] r3 :
c154d928 r2 :
00000000 r1 :
efffcbd1 r0 :
c1760164
[ 73.169641] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 73.169782] Control:
10c5387d Table:
8345406a DAC:
00000051
[ 73.169895] Register r0 information: non-slab/vmalloc memory
[ 73.170032] Register r1 information: non-slab/vmalloc memory
[ 73.170158] Register r2 information: NULL pointer
[ 73.170273] Register r3 information: non-slab/vmalloc memory
[ 73.170397] Register r4 information: non-slab/vmalloc memory
[ 73.170521] Register r5 information: non-slab/vmalloc memory
[ 73.170647] Register r6 information: non-paged memory
[ 73.170771] Register r7 information: non-paged memory
[ 73.170892] Register r8 information: NULL pointer
[ 73.171009] Register r9 information: non-slab/vmalloc memory
[ 73.171142] Register r10 information: NULL pointer
[ 73.171259] Register r11 information: NULL pointer
[ 73.171375] Register r12 information: NULL pointer
[ 73.171494] Process sh (pid: 536, stack limit = 0xcd1ba82f)
[ 73.171621] Stack: (0xc2ef5e70 to 0xc2ef6000)
[ 73.171731] 5e60: ???????? ???????? ???????? ????????
[ 73.171899] 5e80: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172059] 5ea0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172217] 5ec0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172377] 5ee0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172537] 5f00: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172698] 5f20: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172856] 5f40: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173016] 5f60: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173177] 5f80: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173336] 5fa0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173496] 5fc0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173654] 5fe0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173826] [<
c0196f44>] (try_enable_new_console) from [<
c01984a8>] (register_console+0x10c/0x2ec)
[ 73.174053] [<
c01984a8>] (register_console) from [<
c06e2c90>] (console_store+0x14c/0x168)
[ 73.174262] [<
c06e2c90>] (console_store) from [<
c0383718>] (kernfs_fop_write_iter+0x110/0x1cc)
[ 73.174470] [<
c0383718>] (kernfs_fop_write_iter) from [<
c02cf5f4>] (vfs_write+0x31c/0x548)
[ 73.174679] [<
c02cf5f4>] (vfs_write) from [<
c02cf970>] (ksys_write+0x60/0xec)
[ 73.174863] [<
c02cf970>] (ksys_write) from [<
c0100080>] (ret_fast_syscall+0x0/0x1c)
[ 73.175052] Exception stack(0xc2ef5fa8 to 0xc2ef5ff0)
[ 73.175167] 5fa0: ???????? ???????? ???????? ???????? ???????? ????????
[ 73.175327] 5fc0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.175486] 5fe0: ???????? ???????? ???????? ????????
[ 73.175608] Code:
00000000 00000000 00000000 00000000 (
00000000)
[ 73.175744] ---[ end trace
9b75121265109bf1 ]---
A similar issue could be triggered by unbinding/binding the serial
console device [*].
Drop __init so that imx_uart_setup_console() can be safely called at
runtime.
[*] https://lore.kernel.org/all/
20181114174940.7865-3-stefan@agner.ch/
Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20211020192643.476895-2-francesco.dolcini@toradex.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Wed, 20 Oct 2021 21:14:11 +0000 (14:14 -0700)]
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
[ Upstream commit
d305c253af693e69a36cedec880aca6d0c6d789d ]
A prior patch introduced HBA_NEEDS_CFG_PORT flag logic, but in
lpfc_sli_brdrestart_s3() code path, right after HBA_NEEDS_CFG_PORT is set,
the phba->hba_flag is cleared in lpfc_sli_brdreset().
Fix by calling lpfc_sli_chipset_init() to wait for successful restart of
the HBA in lpfc_host_reset_handler() after lpfc_sli_brdrestart().
lpfc_sli_chipset_init() sets the HBA_NEEDS_CFG_PORT flag so that the
lpfc_sli_hba_setup() routine from lpfc_online() will execute
lpfc_sli_config_port() initialization step when the brdrestart is
successful.
Link: https://lore.kernel.org/r/20211020211417.88754-3-jsmart2021@gmail.com
Fixes: d2f2547efd39 ("scsi: lpfc: Fix auto sli_mode and its effect on CONFIG_PORT for SLI3")
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivas Kandagatla [Tue, 14 Sep 2021 09:22:14 +0000 (10:22 +0100)]
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
[ Upstream commit
b6ca770ae7f2c560a29bbd02c4e3d734fafaf804 ]
UFS drivers that probe defer will end up leaking memory allocated for clk
and regulator names via kstrdup() because the structure that is holding
this memory is allocated via devm_* variants which will be freed during
probe defer but the names are never freed.
Use same devm_* variant of kstrdup to free the memory allocated to name
when driver probe defers.
Kmemleak found around 11 leaks on Qualcomm Dragon Board RB5:
unreferenced object 0xffff66f243fb2c00 (size 128):
comm "kworker/u16:0", pid 7, jiffies
4294893319 (age 94.848s)
hex dump (first 32 bytes):
63 6f 72 65 5f 63 6c 6b 00 76 69 72 74 75 61 6c core_clk.virtual
2f 77 6f 72 6b 71 75 65 75 65 2f 73 63 73 69 5f /workqueue/scsi_
backtrace:
[<
000000006f788cd1>] slab_post_alloc_hook+0x88/0x410
[<
00000000cfd1372b>] __kmalloc_track_caller+0x138/0x230
[<
00000000a92ab17b>] kstrdup+0xb0/0x110
[<
0000000037263ab6>] ufshcd_pltfrm_init+0x1a8/0x500
[<
00000000a20a5caa>] ufs_qcom_probe+0x20/0x58
[<
00000000a5e43067>] platform_probe+0x6c/0x118
[<
00000000ef686e3f>] really_probe+0xc4/0x330
[<
000000005b18792c>] __driver_probe_device+0x88/0x118
[<
00000000a5d295e8>] driver_probe_device+0x44/0x158
[<
000000007e83f58d>] __device_attach_driver+0xb4/0x128
[<
000000004bfa4470>] bus_for_each_drv+0x68/0xd0
[<
00000000b89a83bc>] __device_attach+0xec/0x170
[<
00000000ada2beea>] device_initial_probe+0x14/0x20
[<
0000000079921612>] bus_probe_device+0x9c/0xa8
[<
00000000d268bf7c>] deferred_probe_work_func+0x90/0xd0
[<
000000009ef64bfa>] process_one_work+0x29c/0x788
unreferenced object 0xffff66f243fb2c80 (size 128):
comm "kworker/u16:0", pid 7, jiffies
4294893319 (age 94.848s)
hex dump (first 32 bytes):
62 75 73 5f 61 67 67 72 5f 63 6c 6b 00 00 00 00 bus_aggr_clk....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
With this patch no memory leaks are reported.
Link: https://lore.kernel.org/r/20210914092214.6468-1-srinivas.kandagatla@linaro.org
Fixes: aa4976130934 ("ufs: Add regulator enable support")
Fixes: c6e79dacd86f ("ufs: Add clock initialization support")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivas Kandagatla [Tue, 12 Oct 2021 10:15:21 +0000 (11:15 +0100)]
soundwire: bus: stop dereferencing invalid slave pointer
[ Upstream commit
4cbbe74d906be0bcffbe1e74b43a00f99626a69c ]
Slave pointer is invalid after end of list iteration, using this
would result in below Memory abort.
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000004
...
Call trace:
__dev_printk+0x34/0x7c
_dev_warn+0x6c/0x90
sdw_bus_exit_clk_stop+0x194/0x1d0
swrm_runtime_resume+0x13c/0x238
pm_generic_runtime_resume+0x2c/0x48
__rpm_callback+0x44/0x150
rpm_callback+0x6c/0x78
rpm_resume+0x314/0x558
rpm_resume+0x378/0x558
rpm_resume+0x378/0x558
__pm_runtime_resume+0x3c/0x88
Use bus->dev instead to print this error message.
Fixes: b50bb8ba369cd ("soundwire: bus: handle -ENODATA errors in clock stop/start sequences")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211012101521.32087-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nuno Sá [Fri, 3 Sep 2021 14:14:19 +0000 (16:14 +0200)]
iio: adis: do not disabe IRQs in 'adis_init()'
[ Upstream commit
b600bd7eb333554518b4dd36b882b2ae58a5149e ]
With commit
ecb010d441088 ("iio: imu: adis: Refactor adis_initial_startup")
we are doing a HW or SW reset to the device which means that we'll get
the default state of the data ready pin (which is enabled). Hence there's
no point in disabling the IRQ in the init function. Moreover, this
function is intended to initialize internal data structures and not
really do anything on the device.
As a result of this, some devices were left with the data ready pin enabled
after probe which was not the desired behavior. Thus, we move the call to
'adis_enable_irq()' to the initial startup function where it makes more
sense for it to be.
Note that for devices that cannot mask/unmask the pin, it makes no sense
to call the function at this point since the IRQ should not have been
yet requested. This will be improved in a follow up change.
Fixes: ecb010d441088 ("iio: imu: adis: Refactor adis_initial_startup")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210903141423.517028-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Fri, 15 Oct 2021 01:36:09 +0000 (18:36 -0700)]
usb: typec: STUSB160X should select REGMAP_I2C
[ Upstream commit
8ef1e58783b9f55daa4a865c7801dc75cbeb8260 ]
REGMAP_I2C is not a user visible kconfig symbol so driver configs
should not "depend on" it. They should depend on I2C and then
select REGMAP_I2C.
If this worked, it was only because some other driver had set/enabled
REGMAP_I2C.
Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20211015013609.7300-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Wed, 13 Oct 2021 09:49:22 +0000 (12:49 +0300)]
iio: buffer: Fix double-free in iio_buffers_alloc_sysfs_and_mask()
[ Upstream commit
09776d9374e635b1580b3736c19b95b788fbaa85 ]
When __iio_buffer_alloc_sysfs_and_mask() failed, 'unwind_idx' should be
set to 'i - 1' to prevent double-free when cleanup resources.
BUG: KASAN: double-free or invalid-free in __iio_buffer_free_sysfs_and_mask+0x32/0xb0 [industrialio]
Call Trace:
kfree+0x117/0x4c0
__iio_buffer_free_sysfs_and_mask+0x32/0xb0 [industrialio]
iio_buffers_alloc_sysfs_and_mask+0x60d/0x1570 [industrialio]
__iio_device_register+0x483/0x1a30 [industrialio]
ina2xx_probe+0x625/0x980 [ina2xx_adc]
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211013094923.2473-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Sat, 16 Oct 2021 19:06:07 +0000 (22:06 +0300)]
soc: qcom: socinfo: add two missing PMIC IDs
[ Upstream commit
2fae3ecc70405b72ea6c923b216d34547559d6a9 ]
Add IDs for PMK8001 and PMI8996. They also fall in the list of
'duplicated' IDs, where the same index was used for multiple chips.
Fixes: 7fda2b0bfbd9 ("soc: qcom: socinfo: import PMIC IDs from pmic-spmi")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211016190607.49866-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bjorn Andersson [Tue, 5 Oct 2021 03:37:32 +0000 (20:37 -0700)]
soc: qcom: rpmhpd: Make power_on actually enable the domain
[ Upstream commit
e3e56c050ab6e3f1bd811f0787f50709017543e4 ]
The general expectation is that powering on a power-domain should make
the power domain deliver some power, and if a specific performance state
is needed further requests has to be made.
But in contrast with other power-domain implementations (e.g. rpmpd) the
RPMh does not have an interface to enable the power, so the driver has
to vote for a particular corner (performance level) in rpmh_power_on().
But the corner is never initialized, so a typical request to simply
enable the power domain would not actually turn on the hardware. Further
more, when no more clients vote for a performance state (i.e. the
aggregated vote is 0) the power domain would be turned off.
Fix both of these issues by always voting for a corner with non-zero
value, when the power domain is enabled.
The tracking of the lowest non-zero corner is performed to handle the
corner case if there's ever a domain with a non-zero lowest corner, in
which case both rpmh_power_on() and rpmh_rpmhpd_set_performance_state()
would be allowed to use this lowest corner.
Fixes: 279b7e8a62cc ("soc: qcom: rpmhpd: Add RPMh power domain driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211005033732.2284447-1-bjorn.andersson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Fitzgerald [Fri, 15 Oct 2021 13:36:08 +0000 (14:36 +0100)]
ASoC: cs42l42: Defer probe if request_threaded_irq() returns EPROBE_DEFER
[ Upstream commit
0306988789d9d91a18ff70bd2bf165d3ae0ef1dd ]
The driver can run without an interrupt so if devm_request_threaded_irq()
failed, the probe() just carried on. But if this was EPROBE_DEFER the
driver would continue without an interrupt instead of deferring to wait
for the interrupt to become available.
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211015133619.4698-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Fitzgerald [Fri, 15 Oct 2021 13:36:06 +0000 (14:36 +0100)]
ASoC: cs42l42: Correct some register default values
[ Upstream commit
d591d4b32aa9552af14a0c7c586a2d3fe9ecc6e0 ]
Some registers had wrong default values in cs42l42_reg_defaults[].
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/20211015133619.4698-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Fitzgerald [Fri, 15 Oct 2021 13:36:05 +0000 (14:36 +0100)]
ASoC: cs42l42: Always configure both ASP TX channels
[ Upstream commit
6e6825801ab926360f7f4f2dbcfd107d5ab8f025 ]
An I2S frame always has two slots (left and right) even when sending
mono. The right channel (channel 2) of ASP TX will always have the
same bit width as the left channel and will always be on the high
phase of LRCLK.
The previous implementation always passed the field masks for both
channels to snd_soc_component_update_bits() but for mono the written value
only contained the settings for channel 1. The result was that for mono
channel 2 was set to 8-bit (which is an invalid configuration) with both
channels on the low phase of LRCLK.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 585e7079de0e ("ASoC: cs42l42: Add Capture Support")
Link: https://lore.kernel.org/r/20211015133619.4698-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olivier Moysan [Mon, 4 Oct 2021 09:03:04 +0000 (11:03 +0200)]
ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
[ Upstream commit
1a9a9d226f0f0ef5d9bf588ab432e0d679bb1954 ]
Fix SAI2A and SAI2B pin muxings for AV96 board on STM32MP15.
Change sai2a-4 & sai2a-5 to sai2a-2 & sai2a-2.
Change sai2a-4 & sai2a-sleep-5 to sai2b-2 & sai2b-sleep-2
Fixes: dcf185ca8175 ("ARM: dts: stm32: Add alternate pinmux for SAI2 pins on stm32mp15")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olivier Moysan [Fri, 24 Sep 2021 16:02:21 +0000 (18:02 +0200)]
ARM: dts: stm32: fix SAI sub nodes register range
[ Upstream commit
6f87a74d31277f0896dcf8c0850ec14bde03c423 ]
The STM32 SAI subblocks registers offsets are in the range
0x0004 (SAIx_CR1) to 0x0020 (SAIx_DR).
The corresponding range length is 0x20 instead of 0x1c.
Change reg property accordingly.
Fixes: 5afd65c3a060 ("ARM: dts: stm32: add sai support on stm32mp157c")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabrice Gasnier [Tue, 21 Sep 2021 13:34:49 +0000 (15:34 +0200)]
ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkx
[ Upstream commit
3d4fb3d4c431f45272bf8c308d3cbe030817f046 ]
STUSB1600 IRQ (Alert pin) is active low (open drain). Interrupts may get
lost currently, so fix the IRQ type.
Fixes: 83686162c0eb ("ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Mon, 9 Aug 2021 12:13:24 +0000 (14:13 +0200)]
ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz
[ Upstream commit
2012579b31293d0a8cf2024e9dab66810bf1a15e ]
The SPI NOR is a bit further away from the SoC on DHCOR than on DHCOM,
which causes additional signal delay. At 108 MHz, this delay triggers
a sporadic issue where the first bit of RX data is not received by the
QSPI controller.
There are two options of addressing this problem, either by using the
DLYB block to compensate the extra delay, or by reducing the QSPI bus
clock frequency. The former requires calibration and that is overly
complex, so opt for the second option.
Fixes: 76045bc457104 ("ARM: dts: stm32: Add QSPI NOR on AV96")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Thu, 7 Oct 2021 14:38:47 +0000 (16:38 +0200)]
pinctrl: renesas: checker: Fix off-by-one bug in drive register check
[ Upstream commit
28e7f8ff90583791a034d43b5d2e3fe394142e13 ]
The GENMASK(h, l) macro creates a contiguous bitmask starting at bit
position @l and ending at position @h, inclusive.
This did not trigger any error checks, as the individual register fields
cover at most 3 of the 4 available bits.
Fixes: 08df16e07ad0a1ec ("pinctrl: sh-pfc: checker: Add drive strength register checks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8f82d6147fbe3367d4c83962480e97f58d9c96a2.1633615652.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Athira Rajeev [Thu, 7 Oct 2021 07:51:21 +0000 (13:21 +0530)]
powerpc/perf: Fix cycles/instructions as PM_CYC/PM_INST_CMPL in power10
[ Upstream commit
8f6aca0e0f26eaaee670cd27896993a45cdc8f9e ]
On power9 and earlier platforms, the default event used for cyles and
instructions is PM_CYC (0x0001e) and PM_INST_CMPL (0x00002)
respectively. These events use two programmable PMCs and by default will
count irrespective of the run latch state (idle state). But since they
use programmable PMCs, these events can lead to multiplexing with other
events, because there are only 4 programmable PMCs. Hence in power10,
performance monitoring unit (PMU) driver uses performance monitor
counter 5 (PMC5) and performance monitor counter6 (PMC6) for counting
instructions and cycles.
Currently on power10, the event used for cycles is PM_RUN_CYC (0x600F4)
and instructions uses PM_RUN_INST_CMPL (0x500fa). But counting of these
events in idle state is controlled by the CC56RUN bit setting in Monitor
Mode Control Register0 (MMCR0). If the CC56RUN bit is zero, PMC5/6 will
not count when CTRL[RUN] (run latch) is zero. This could lead to missing
some counts if a thread is in idle state during system wide profiling.
To fix it, set the CC56RUN bit in MMCR0 for power10, which makes PMC5
and PMC6 count instructions and cycles regardless of the run latch
state. Since this change make PMC5/6 count as PM_INST_CMPL/PM_CYC,
rename the event code 0x600f4 as PM_CYC instead of PM_RUN_CYC and event
code 0x500fa as PM_INST_CMPL instead of PM_RUN_INST_CMPL. The changes
are only for PMC5/6 event codes and will not affect the behaviour of
PM_RUN_CYC/PM_RUN_INST_CMPL if progammed in other PMC's.
Fixes: a64e697cef23 ("powerpc/perf: power10 Performance Monitoring support")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.cm>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Tweak change log wording for style and consistency]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211007075121.28497-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrew Halaney [Wed, 13 Oct 2021 15:40:20 +0000 (11:40 -0400)]
dyndbg: make dyndbg a known cli param
[ Upstream commit
5ca173974888368fecfb17ae6fe455df5fd2a9d2 ]
Right now dyndbg shows up as an unknown parameter if used on boot:
Unknown command line parameters: dyndbg=+p
That's because it is unknown, it doesn't sit in the __param
section, so the processing done to warn users supplying an unknown
parameter doesn't think it is legitimate.
Install a dummy handler to register it. dynamic debug needs to search
the whole command line for modules listed that are currently builtin,
so there's no real work to be done in this callback.
Fixes: 86d1919a4fb0 ("init: print out unknown kernel parameters")
Tested-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Link: https://lore.kernel.org/r/1634139622-20667-2-git-send-email-jbaron@akamai.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Logan Gunthorpe [Wed, 13 Oct 2021 16:59:42 +0000 (10:59 -0600)]
RDMA/core: Set sgtable nents when using ib_dma_virt_map_sg()
[ Upstream commit
ac0fffa0859b8e1e991939663b3ebdd80bf979e6 ]
ib_dma_map_sgtable_attrs() should be mapping the sgls and setting nents
but the ib_uses_virt_dma() path falls back to ib_dma_virt_map_sg() which
will not set the nents in the sgtable.
Check the return value (per the map_sg calling convention) and set
sgt->nents appropriately on success.
Fixes: 79fbd3e1241c ("RDMA: Use the sg_table directly and remove the opencoded version from umem")
Link: https://lore.kernel.org/r/20211013165942.89806-1-logang@deltatee.com
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vegard Nossum [Mon, 11 Oct 2021 15:29:41 +0000 (17:29 +0200)]
staging: ks7010: select CRYPTO_HASH/CRYPTO_MICHAEL_MIC
[ Upstream commit
9ca0e55e52c7b2a99f3c2051fc4bd1c63a061519 ]
Fix the following build/link errors:
ld: drivers/staging/ks7010/ks_hostif.o: in function `michael_mic.constprop.0':
ks_hostif.c:(.text+0x95b): undefined reference to `crypto_alloc_shash'
ld: ks_hostif.c:(.text+0x97a): undefined reference to `crypto_shash_setkey'
ld: ks_hostif.c:(.text+0xa13): undefined reference to `crypto_shash_update'
ld: ks_hostif.c:(.text+0xa28): undefined reference to `crypto_shash_update'
ld: ks_hostif.c:(.text+0xa48): undefined reference to `crypto_shash_finup'
ld: ks_hostif.c:(.text+0xa6d): undefined reference to `crypto_destroy_tfm'
Fixes: 8b523f20417d ("staging: ks7010: removed custom Michael MIC implementation.")
Fixes: 3e5bc68fa5968 ("staging: ks7010: Fix build error")
Fixes: a4961427e7494 ("Revert "staging: ks7010: Fix build error"")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Link: https://lore.kernel.org/r/20211011152941.12847-1-vegard.nossum@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nikita Yushchenko [Mon, 11 Oct 2021 06:11:18 +0000 (09:11 +0300)]
staging: most: dim2: do not double-register the same device
[ Upstream commit
2ab189164056b05474275bb40caa038a37713061 ]
Commit
723de0f9171e ("staging: most: remove device from interface
structure") moved registration of driver-provided struct device to
the most subsystem.
Dim2 used to register the same struct device to provide a custom device
attribute. This causes double-registration of the same struct device.
Fix that by moving the custom attribute to driver's dev_groups.
This moves attribute to the platform_device object, which is a better
location for platform-specific attributes anyway.
Fixes: 723de0f9171e ("staging: most: remove device from interface structure")
Acked-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://lore.kernel.org/r/20211011061117.21435-1-nikita.yoush@cogentembedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Tue, 5 Oct 2021 23:57:47 +0000 (16:57 -0700)]
usb: musb: select GENERIC_PHY instead of depending on it
[ Upstream commit
fde1fbedbaed4e76cef4600d775b185f59b9b568 ]
The kconfig symbol GENERIC_PHY says:
All the users of this framework should select this config.
and around 136 out of 138 drivers do so, so change USB_MUSB_MEDIATEK
to do so also.
This (also) fixes a long circular dependency problem for an upcoming
patch.
Fixes: 0990366bab3c ("usb: musb: Add support for MediaTek musb controller")
Cc: Bin Liu <b-liu@ti.com>
Cc: Min Guo <min.guo@mediatek.com>
Cc: Yonglong Wu <yonglong.wu@mediatek.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20211005235747.5588-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leon Romanovsky [Tue, 12 Oct 2021 07:28:43 +0000 (10:28 +0300)]
RDMA/mlx4: Return missed an error if device doesn't support steering
[ Upstream commit
f4e56ec4452f48b8292dcf0e1c4bdac83506fb8b ]
The error flow fixed in this patch is not possible because all kernel
users of create QP interface check that device supports steering before
set IB_QP_CREATE_NETIF_QP flag.
Fixes: c1c98501121e ("IB/mlx4: Add support for steerable IB UD QPs")
Link: https://lore.kernel.org/r/91c61f6e60eb0240f8bbc321fda7a1d2986dd03c.1634023677.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 6 Oct 2021 07:32:43 +0000 (10:32 +0300)]
scsi: csiostor: Uninitialized data in csio_ln_vnp_read_cbfn()
[ Upstream commit
f4875d509a0a78ad294a1a538d534b5ba94e685a ]
This variable is just a temporary variable, used to do an endian
conversion. The problem is that the last byte is not initialized. After
the conversion is completely done, the last byte is discarded so it doesn't
cause a problem. But static checkers and the KMSan runtime checker can
detect the uninitialized read and will complain about it.
Link: https://lore.kernel.org/r/20211006073242.GA8404@kili
Fixes: 5036f0a0ecd3 ("[SCSI] csiostor: Fix sparse warnings.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Fri, 8 Oct 2021 06:31:50 +0000 (14:31 +0800)]
power: supply: max17040: fix null-ptr-deref in max17040_probe()
[ Upstream commit
1d422ecfc48ee683ae1ccc9217764f6310c0ffce ]
Add check the return value of devm_regmap_init_i2c(), otherwise
later access may cause null-ptr-deref as follows:
KASAN: null-ptr-deref in range [0x0000000000000360-0x0000000000000367]
RIP: 0010:regmap_read+0x33/0x170
Call Trace:
max17040_probe+0x61b/0xff0 [max17040_battery]
? write_comp_data+0x2a/0x90
? max17040_set_property+0x1d0/0x1d0 [max17040_battery]
? tracer_hardirqs_on+0x33/0x520
? __sanitizer_cov_trace_pc+0x1d/0x50
? _raw_spin_unlock_irqrestore+0x4b/0x60
? trace_hardirqs_on+0x63/0x2d0
? write_comp_data+0x2a/0x90
? __sanitizer_cov_trace_pc+0x1d/0x50
? max17040_set_property+0x1d0/0x1d0 [max17040_battery]
i2c_device_probe+0xa31/0xbe0
Fixes: 6455a8a84bdf ("power: supply: max17040: Use regmap i2c")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jakob Hauser [Fri, 8 Oct 2021 08:32:45 +0000 (10:32 +0200)]
power: supply: rt5033_battery: Change voltage values to µV
[ Upstream commit
bf895295e9a73411889816f1a0c1f4f1a2d9c678 ]
Currently the rt5033_battery driver provides voltage values in mV. It
should be µV as stated in Documentation/power/power_supply_class.rst.
Fixes: b847dd96e659 ("power: rt5033_battery: Add RT5033 Fuel gauge device driver")
Cc: Beomho Seo <beomho.seo@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 11 Oct 2021 12:37:39 +0000 (15:37 +0300)]
usb: gadget: hid: fix error code in do_config()
[ Upstream commit
68e7c510fdf4f6167404609da52e1979165649f6 ]
Return an error code if usb_get_function() fails. Don't return success.
Fixes: 4bc8a33f2407 ("usb: gadget: hid: convert to new interface of f_hid")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211011123739.GC15188@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Tue, 5 Oct 2021 13:45:16 +0000 (16:45 +0300)]
serial: 8250_dw: Drop wrong use of ACPI_PTR()
[ Upstream commit
ebabb77a2a115b6c5e68f7364b598310b5f61fb2 ]
ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused which is not what we want.
Instead of adding ifdeffery here and there, drop ACPI_PTR().
Fixes: 6a7320c4669f ("serial: 8250_dw: Add ACPI 5.0 support")
Reported-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211005134516.23218-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Lynch [Tue, 28 Sep 2021 21:41:47 +0000 (16:41 -0500)]
powerpc/paravirt: correct preempt debug splat in vcpu_is_preempted()
[ Upstream commit
fda0eb220021a97c1d656434b9340ebf3fc4704a ]
vcpu_is_preempted() can be used outside of preempt-disabled critical
sections, yielding warnings such as:
BUG: using smp_processor_id() in preemptible [
00000000] code: systemd-udevd/185
caller is rwsem_spin_on_owner+0x1cc/0x2d0
CPU: 1 PID: 185 Comm: systemd-udevd Not tainted 5.15.0-rc2+ #33
Call Trace:
[
c000000012907ac0] [
c000000000aa30a8] dump_stack_lvl+0xac/0x108 (unreliable)
[
c000000012907b00] [
c000000001371f70] check_preemption_disabled+0x150/0x160
[
c000000012907b90] [
c0000000001e0e8c] rwsem_spin_on_owner+0x1cc/0x2d0
[
c000000012907be0] [
c0000000001e1408] rwsem_down_write_slowpath+0x478/0x9a0
[
c000000012907ca0] [
c000000000576cf4] filename_create+0x94/0x1e0
[
c000000012907d10] [
c00000000057ac08] do_symlinkat+0x68/0x1a0
[
c000000012907d70] [
c00000000057ae18] sys_symlink+0x58/0x70
[
c000000012907da0] [
c00000000002e448] system_call_exception+0x198/0x3c0
[
c000000012907e10] [
c00000000000c54c] system_call_common+0xec/0x250
The result of vcpu_is_preempted() is always used speculatively, and the
function does not access per-cpu resources in a (Linux) preempt-unsafe way.
Use raw_smp_processor_id() to avoid such warnings, adding explanatory
comments.
Fixes: ca3f969dcb11 ("powerpc/paravirt: Use is_kvm_guest() in vcpu_is_preempted()")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210928214147.312412-3-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi.git / log