review.tizen.org Git - platform/kernel/linux-rpi.git/log

can: m_can: m_can_read_fifo: fix memory leak in error branch

In m_can_read_fifo(), if the second call to m_can_fifo_read() fails,
the function jump to the out_fail label and returns without calling
m_can_receive_skb(). This means that the skb previously allocated by
alloc_can_skb() is not freed. In other terms, this is a memory leak.

This patch adds a goto label to destroy the skb if an error occurs.

Issue was found with GCC -fanalyzer, please follow the link below for
details.

Fixes: e39381770ec9 ("can: m_can: Disable IRQs on FIFO bus errors")
Link: https://lore.kernel.org/all/20211107050755.70655-1-mailhol.vincent@wanadoo.fr
Cc: stable@vger.kernel.org
Cc: Matt Kline <matt@bitbashing.io>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: m_can: Disable and ignore ELO interrupt

With the design of this driver, this condition is often triggered.
However, the counter that this interrupt indicates an overflow is never
read either, so overflowing is harmless.

On my system, when a CAN bus starts flapping up and down, this locks up
the whole system with lots of interrupts and printks.

Specifically, this interrupt indicates the CEL field of ECR has
overflowed. All reads of ECR mask out CEL.

Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Link: https://lore.kernel.org/all/20211129222628.7490-1-brian.silverman@bluerivertech.com
Cc: stable@vger.kernel.org
Signed-off-by: Brian Silverman <brian.silverman@bluerivertech.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: sja1000: fix use after free in ems_pcmcia_add_card()

If the last channel is not available then "dev" is freed. Fortunately,
we can just use "pdev->irq" instead.

Also we should check if at least one channel was set up.

Fixes: fd734c6f25ae ("can/sja1000: add driver for EMS PCMCIA card")
Link: https://lore.kernel.org/all/20211124145041.GB13656@kili
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: pch_can: pch_can_rx_normal: fix use after free

After calling netif_receive_skb(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is dereferenced
just after the call netif_receive_skb(skb).

Reordering the lines solves the issue.

Fixes: b21d18b51b31 ("can: Topcliff: Add PCH_CAN driver.")
Link: https://lore.kernel.org/all/20211123111654.621610-1-mailhol.vincent@wanadoo.fr
Cc: stable@vger.kernel.org
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

devlink: fix netns refcount leak in devlink_nl_cmd_reload()

While preparing my patch series adding netns refcount tracking,
I spotted bugs in devlink_nl_cmd_reload()

Some error paths forgot to release a refcount on a netns.

To fix this, we can reduce the scope of get_net()/put_net()
section around the call to devlink_reload().

Fixes: ccdf07219da6 ("devlink: Add reload action option to devlink reload command")
Fixes: dc64cc7c6310 ("devlink: Add devlink reload limit option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Moshe Shemesh <moshe@mellanox.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20211205192822.1741045-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ethtool: do not perform operations on net devices being unregistered

There is a short period between a net device starts to be unregistered
and when it is actually gone. In that time frame ethtool operations
could still be performed, which might end up in unwanted or undefined
behaviours[1].

Do not allow ethtool operations after a net device starts its
unregistration. This patch targets the netlink part as the ioctl one
isn't affected: the reference to the net device is taken and the
operation is executed within an rtnl lock section and the net device
won't be found after unregister.

[1] For example adding Tx queues after unregister ends up in NULL
    pointer exceptions and UaFs, such as:

      BUG: KASAN: use-after-free in kobject_get+0x14/0x90
      Read of size 1 at addr ffff88801961248c by task ethtool/755

      CPU: 0 PID: 755 Comm: ethtool Not tainted 5.15.0-rc6+ #778
      Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/014
      Call Trace:
       dump_stack_lvl+0x57/0x72
       print_address_description.constprop.0+0x1f/0x140
       kasan_report.cold+0x7f/0x11b
       kobject_get+0x14/0x90
       kobject_add_internal+0x3d1/0x450
       kobject_init_and_add+0xba/0xf0
       netdev_queue_update_kobjects+0xcf/0x200
       netif_set_real_num_tx_queues+0xb4/0x310
       veth_set_channels+0x1c3/0x550
       ethnl_set_channels+0x524/0x610

Fixes: 041b1c5d4a53 ("ethtool: helper functions for netlink interface")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20211203101318.435618-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero

Currently, due to the sequential use of min_t() and clamp_t() macros,
in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic
sets tx_max to 0.  This is then used to allocate the data area of the
SKB requested later in cdc_ncm_fill_tx_frame().

This does not cause an issue presently because when memory is
allocated during initialisation phase of SKB creation, more memory
(512b) is allocated than is required for the SKB headers alone (320b),
leaving some space (512b - 320b = 192b) for CDC data (172b).

However, if more elements (for example 3 x u64 = [24b]) were added to
one of the SKB header structs, say 'struct skb_shared_info',
increasing its original size (320b [320b aligned]) to something larger
(344b [384b aligned]), then suddenly the CDC data (172b) no longer
fits in the spare SKB data area (512b - 384b = 128b).

Consequently the SKB bounds checking semantics fails and panics:

  skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172   \
     head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev:<NULL>

  ------------[ cut here ]------------
  kernel BUG at net/core/skbuff.c:110!
  RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106
  <snip>
  Call Trace:
   <IRQ>
   skb_over_panic+0x2c/0x30 net/core/skbuff.c:115
   skb_put+0x205/0x210 net/core/skbuff.c:1877
   skb_put_zero include/linux/skbuff.h:2270 [inline]
   cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline]
   cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293
   cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514

By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX
when not offered through the system provided params, we ensure enough
data space is allocated to handle the CDC data, meaning no crash will
occur.

Cc: Oliver Neukum <oliver@neukum.org>
Fixes: 289507d3364f9 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20211202143437.1411410-1-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

qede: validate non LSO skb length

Although it is unlikely that stack could transmit a non LSO
skb with length > MTU, however in some cases or environment such
occurrences actually resulted into firmware asserts due to packet
length being greater than the max supported by the device (~9700B).

This patch adds the safeguard for such odd cases to avoid firmware
asserts.

v2: Added "Fixes" tag with one of the initial driver commit
    which enabled the TX traffic actually (as this was probably
    day1 issue which was discovered recently by some customer
    environment)

Fixes: a2ec6172d29c ("qede: Add support for link")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20211203174413.13090-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: altera: set a couple error code in probe()

There are two error paths which accidentally return success instead of
a negative error code.

Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bcm4908: Handle dma_set_coherent_mask error codes

The return value of dma_set_coherent_mask() is not always 0.
To catch the exception in case that dma is not support the mask.

Fixes: 9d61d138ab30 ("net: broadcom: rename BCM4908 driver & update DT binding")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: net/fcnal-test.sh: add exit code

Previously, the selftest framework always treats it as *ok* even though
some of them are failed actually. That's because the script always
returns 0.

It supports PASS/FAIL/SKIP exit code now.

CC: Philip Li <philip.li@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: make tx_rebalance_counter an atomic

KCSAN reported a data-race [1] around tx_rebalance_counter
which can be accessed from different contexts, without
the protection of a lock/mutex.

[1]
BUG: KCSAN: data-race in bond_alb_init_slave / bond_alb_monitor

write to 0xffff888157e8ca24 of 4 bytes by task 7075 on cpu 0:
bond_alb_init_slave+0x713/0x860 drivers/net/bonding/bond_alb.c:1613
bond_enslave+0xd94/0x3010 drivers/net/bonding/bond_main.c:1949
do_set_master net/core/rtnetlink.c:2521 [inline]
__rtnl_newlink net/core/rtnetlink.c:3475 [inline]
rtnl_newlink+0x1298/0x13b0 net/core/rtnetlink.c:3506
rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5571
netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2491
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5589
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5fc/0x6c0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x6e1/0x7d0 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmsg+0x195/0x230 net/socket.c:2492
__do_sys_sendmsg net/socket.c:2501 [inline]
__se_sys_sendmsg net/socket.c:2499 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2499
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888157e8ca24 of 4 bytes by task 1082 on cpu 1:
bond_alb_monitor+0x8f/0xc00 drivers/net/bonding/bond_alb.c:1511
process_one_work+0x3fc/0x980 kernel/workqueue.c:2298
worker_thread+0x616/0xa70 kernel/workqueue.c:2445
kthread+0x2c7/0x2e0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30

value changed: 0x00000001 -> 0x00000064

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 1082 Comm: kworker/u4:3 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: bond1 bond_alb_monitor

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: fix another uninit-value (sk_rx_queue_mapping)

KMSAN is still not happy [1].

I missed that passive connections do not inherit their
sk_rx_queue_mapping values from the request socket,
but instead tcp_child_process() is calling
sk_mark_napi_id(child, skb)

We have many sk_mark_napi_id() callers, so I am providing
a new helper, forcing the setting sk_rx_queue_mapping
and sk_napi_id.

Note that we had no KMSAN report for sk_napi_id because
passive connections got a copy of this field from the listener.
sk_rx_queue_mapping in the other hand is inside the
sk_dontcopy_begin/sk_dontcopy_end so sk_clone_lock()
leaves this field uninitialized.

We might remove dead code populating req->sk_rx_queue_mapping
in the future.

[1]

BUG: KMSAN: uninit-value in __sk_rx_queue_set include/net/sock.h:1924 [inline]
BUG: KMSAN: uninit-value in sk_rx_queue_update include/net/sock.h:1938 [inline]
BUG: KMSAN: uninit-value in sk_mark_napi_id include/net/busy_poll.h:136 [inline]
BUG: KMSAN: uninit-value in tcp_child_process+0xb42/0x1050 net/ipv4/tcp_minisocks.c:833
__sk_rx_queue_set include/net/sock.h:1924 [inline]
sk_rx_queue_update include/net/sock.h:1938 [inline]
sk_mark_napi_id include/net/busy_poll.h:136 [inline]
tcp_child_process+0xb42/0x1050 net/ipv4/tcp_minisocks.c:833
tcp_v4_rcv+0x3d83/0x4ed0 net/ipv4/tcp_ipv4.c:2066
ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204
ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:460 [inline]
ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline]
ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline]
ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609
ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644
__netif_receive_skb_list_ptype net/core/dev.c:5505 [inline]
__netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553
__netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605
netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696
gro_normal_list net/core/dev.c:5850 [inline]
napi_complete_done+0x579/0xdd0 net/core/dev.c:6587
virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline]
virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557
__napi_poll+0x14e/0xbc0 net/core/dev.c:7020
napi_poll net/core/dev.c:7087 [inline]
net_rx_action+0x824/0x1880 net/core/dev.c:7174
__do_softirq+0x1fe/0x7eb kernel/softirq.c:558
run_ksoftirqd+0x33/0x50 kernel/softirq.c:920
smpboot_thread_fn+0x616/0xbf0 kernel/smpboot.c:164
kthread+0x721/0x850 kernel/kthread.c:327
ret_from_fork+0x1f/0x30

Uninit was created at:
__alloc_pages+0xbc7/0x10a0 mm/page_alloc.c:5409
alloc_pages+0x8a5/0xb80
alloc_slab_page mm/slub.c:1810 [inline]
allocate_slab+0x287/0x1c20 mm/slub.c:1947
new_slab mm/slub.c:2010 [inline]
___slab_alloc+0xbdf/0x1e90 mm/slub.c:3039
__slab_alloc mm/slub.c:3126 [inline]
slab_alloc_node mm/slub.c:3217 [inline]
slab_alloc mm/slub.c:3259 [inline]
kmem_cache_alloc+0xbb3/0x11c0 mm/slub.c:3264
sk_prot_alloc+0xeb/0x570 net/core/sock.c:1914
sk_clone_lock+0xd6/0x1940 net/core/sock.c:2118
inet_csk_clone_lock+0x8d/0x6a0 net/ipv4/inet_connection_sock.c:956
tcp_create_openreq_child+0xb1/0x1ef0 net/ipv4/tcp_minisocks.c:453
tcp_v4_syn_recv_sock+0x268/0x2710 net/ipv4/tcp_ipv4.c:1563
tcp_check_req+0x207c/0x2a30 net/ipv4/tcp_minisocks.c:765
tcp_v4_rcv+0x36f5/0x4ed0 net/ipv4/tcp_ipv4.c:2047
ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204
ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:460 [inline]
ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline]
ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline]
ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609
ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644
__netif_receive_skb_list_ptype net/core/dev.c:5505 [inline]
__netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553
__netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605
netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696
gro_normal_list net/core/dev.c:5850 [inline]
napi_complete_done+0x579/0xdd0 net/core/dev.c:6587
virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline]
virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557
__napi_poll+0x14e/0xbc0 net/core/dev.c:7020
napi_poll net/core/dev.c:7087 [inline]
net_rx_action+0x824/0x1880 net/core/dev.c:7174
__do_softirq+0x1fe/0x7eb kernel/softirq.c:558

Fixes: 342159ee394d ("net: avoid dirtying sk->sk_rx_queue_mapping")
Fixes: a37a0ee4d25c ("net: avoid uninit-value from tcp_conn_request")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Tested-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet: use #ifdef CONFIG_SOCK_RX_QUEUE_MAPPING consistently

Since commit 4e1beecc3b58 ("net/sock: Add kernel config
SOCK_RX_QUEUE_MAPPING"),
sk_rx_queue_mapping access is guarded by CONFIG_SOCK_RX_QUEUE_MAPPING.

Fixes: 54b92e841937 ("tcp: Migrate TCP_ESTABLISHED/TCP_SYN_RECV sockets in accept queues.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/tc-testing: Fix cannot create /sys/bus/netdevsim/new_device: Directory nonexistent

Install netdevsim to provide /sys/bus/netdevsim/new_device interface.

It helps to fix:
# ok 97 9a7d - Change ETS strict band without quantum # skipped - skipped - previous setup failed 11 ce7d
#
#
# -----> prepare stage *** Could not execute: "echo "1 1 4" > /sys/bus/netdevsim/new_device"
#
# -----> prepare stage *** Error message: "/bin/sh: 1: cannot create /sys/bus/netdevsim/new_device: Directory nonexistent
# "
#
# -----> prepare stage *** Aborting test run.
#
#
# <_io.BufferedReader name=5> *** stdout ***
#

Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/tc-testing: add missing config

qdiscs/fq_pie requires CONFIG_NET_SCH_FQ_PIE, otherwise tc will fail
to create a fq_pie qdisc.

It fixes following issue:
# not ok 57 83be - Create FQ-PIE with invalid number of flows
# Command exited with 2, expected 0
# Error: Specified qdisc not found.

Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/tc-testing: add exit code

Mark the summary result as FAIL to prevent from confusing the selftest
framework if some of them are failed.

Previously, the selftest framework always treats it as *ok* even though
some of them are failed actually. That's because the script tdc.sh always
return 0.

# All test results:
#
# 1..97
# ok 1 83be - Create FQ-PIE with invalid number of flows
# ok 2 8b6e - Create RED with no flags
[...snip]
# ok 6 5f15 - Create RED with flags ECN, harddrop
# ok 7 53e8 - Create RED with flags ECN, nodrop
# ok 8 d091 - Fail to create RED with only nodrop flag
# ok 9 af8e - Create RED with flags ECN, nodrop, harddrop
# not ok 10 ce7d - Add mq Qdisc to multi-queue device (4 queues)
# Could not match regex pattern. Verify command output:
# qdisc mq 1: root
# qdisc fq_codel 0: parent 1:4 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
# qdisc fq_codel 0: parent 1:3 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
[...snip]
# ok 96 6979 - Change quantum of a strict ETS band
# ok 97 9a7d - Change ETS strict band without quantum
#
#
#
#
ok 1 selftests: tc-testing: tdc.sh <<< summary result

CC: Philip Li <philip.li@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Acked-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/fib_tests: Rework fib_rp_filter_test()

Currently rp_filter tests in fib_tests.sh:fib_rp_filter_test() are
failing.  ping sockets are bound to dummy1 using the "-I" option
(SO_BINDTODEVICE), but socket lookup is failing when receiving ping
replies, since the routing table thinks they belong to dummy0.

For example, suppose ping is using a SOCK_RAW socket for ICMP messages.
When receiving ping replies, in __raw_v4_lookup(), sk->sk_bound_dev_if
is 3 (dummy1), but dif (skb_rtable(skb)->rt_iif) says 2 (dummy0), so the
raw_sk_bound_dev_eq() check fails.  Similar things happen in
ping_lookup() for SOCK_DGRAM sockets.

These tests used to pass due to a bug [1] in iputils, where "ping -I"
actually did not bind ICMP message sockets to device.  The bug has been
fixed by iputils commit f455fee41c07 ("ping: also bind the ICMP socket
to the specific device") in 2016, which is why our rp_filter tests
started to fail.  See [2] .

Fixing the tests while keeping everything in one netns turns out to be
nontrivial.  Rework the tests and build the following topology:

┌─────────────────────────────┐    ┌─────────────────────────────┐
│  network namespace 1 (ns1)  │    │  network namespace 2 (ns2)  │
│                             │    │                             │
│  ┌────┐     ┌─────┐         │    │  ┌─────┐            ┌────┐  │
│  │ lo │<───>│veth1│<────────┼────┼─>│veth2│<──────────>│ lo │  │
│  └────┘     ├─────┴──────┐  │    │  ├─────┴──────┐     └────┘  │
│             │192.0.2.1/24│  │    │  │192.0.2.1/24│             │
│             └────────────┘  │    │  └────────────┘             │
└─────────────────────────────┘    └─────────────────────────────┘

Consider sending an ICMP_ECHO packet A in ns2.  Both source and
destination IP addresses are 192.0.2.1, and we use strict mode rp_filter
in both ns1 and ns2:

  1. A is routed to lo since its destination IP address is one of ns2's
     local addresses (veth2);
  2. A is redirected from lo's egress to veth2's egress using mirred;
  3. A arrives at veth1's ingress in ns1;
  4. A is redirected from veth1's ingress to lo's ingress, again, using
     mirred;
  5. In __fib_validate_source(), fib_info_nh_uses_dev() returns false,
     since A was received on lo, but reverse path lookup says veth1;
  6. However A is not dropped since we have relaxed this check for lo in
     commit 66f8209547cc ("fib: relax source validation check for loopback
     packets");

Making sure A is not dropped here in this corner case is the whole point
of having this test.

  7. As A reaches the ICMP layer, an ICMP_ECHOREPLY packet, B, is
     generated;
  8. Similarly, B is redirected from lo's egress to veth1's egress (in
     ns1), then redirected once again from veth2's ingress to lo's
     ingress (in ns2), using mirred.

Also test "ping 127.0.0.1" from ns2.  It does not trigger the relaxed
check in __fib_validate_source(), but just to make sure the topology
works with loopback addresses.

Tested with ping from iputils 20210722-41-gf9fb573:

$ ./fib_tests.sh -t rp_filter

IPv4 rp_filter tests
    TEST: rp_filter passes local packets [ OK ]
    TEST: rp_filter passes loopback packets [ OK ]

[1] https://github.com/iputils/iputils/issues/55
[2] https://github.com/iputils/iputils/commit/f455fee41c077d4b700a473b2f5b3487b8febc1d

Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: adb701d6cfa4 ("selftests: add a test case for rp_filter")
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211201004720.6357-1-yepeilin.cs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-5.16-rc4' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, and wireguard.

  Mostly scattered driver changes this week, with one big clump in
  mv88e6xxx. Nothing of note, really.

  Current release - regressions:

   - smc: keep smc_close_final()'s error code during active close

  Current release - new code bugs:

   - iwlwifi: various static checker fixes (int overflow, leaks, missing
     error codes)

   - rtw89: fix size of firmware header before transfer, avoid crash

   - mt76: fix timestamp check in tx_status; fix pktid leak;

   - mscc: ocelot: fix missing unlock on error in ocelot_hwstamp_set()

  Previous releases - regressions:

   - smc: fix list corruption in smc_lgr_cleanup_early

   - ipv4: convert fib_num_tclassid_users to atomic_t

  Previous releases - always broken:

   - tls: fix authentication failure in CCM mode

   - vrf: reset IPCB/IP6CB when processing outbound pkts, prevent
     incorrect processing

   - dsa: mv88e6xxx: fixes for various device errata

   - rds: correct socket tunable error in rds_tcp_tune()

   - ipv6: fix memory leak in fib6_rule_suppress

   - wireguard: reset peer src endpoint when netns exits

   - wireguard: improve resilience to DoS around incoming handshakes

   - tcp: fix page frag corruption on page fault which involves TCP

   - mpls: fix missing attributes in delete notifications

   - mt7915: fix NULL pointer dereference with ad-hoc mode

  Misc:

   - rt2x00: be more lenient about EPROTO errors during start

   - mlx4_en: update reported link modes for 1/10G"

* tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
  net: dsa: b53: Add SPI ID table
  gro: Fix inconsistent indenting
  selftests: net: Correct case name
  net/rds: correct socket tunable error in rds_tcp_tune()
  mctp: Don't let RTM_DELROUTE delete local routes
  net/smc: Keep smc_close_final rc during active close
  ibmvnic: drop bad optimization in reuse_tx_pools()
  ibmvnic: drop bad optimization in reuse_rx_pools()
  net/smc: fix wrong list_del in smc_lgr_cleanup_early
  Fix Comment of ETH_P_802_3_MIN
  ethernet: aquantia: Try MAC address from device tree
  ipv4: convert fib_num_tclassid_users to atomic_t
  net: avoid uninit-value from tcp_conn_request
  net: annotate data-races on txq->xmit_lock_owner
  octeontx2-af: Fix a memleak bug in rvu_mbox_init()
  net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()
  vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit
  net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()
  net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed
  net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family
  ...

Merge tag 'trace-v5.16-rc3' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
"Three tracing fixes:

   - Allow compares of strings when using signed and unsigned characters

   - Fix kmemleak false positive for histogram entries

   - Handle negative numbers for user defined kretprobe data sizes"

* tag 'trace-v5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  kprobes: Limit max data_size of the kretprobe instances
  tracing: Fix a kmemleak false positive in tracing_map
  tracing/histograms: String compares should not care about signed values

Merge tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmi

Pull IPMI fixes from Corey Minyard:
"Some changes that went in 5.16 had issues. When working on the design
  a piece was redesigned and things got missed. And the message type was
  not being initialized when it was allocated, resulting in crashes.

  In addition, the IPMI driver has had a shutdown issue where it could
  still have an item in a system workqueue after it had been shutdown.
  Move to a private workqueue to avoid that problem"

* tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmi:
  ipmi:ipmb: Fix unknown command response
  ipmi: fix IPMI_SMI_MSG_TYPE_IPMB_DIRECT response length checking
  ipmi: fix oob access due to uninit smi_msg type
  ipmi: msghandler: Make symbol 'remove_work_wq' static
  ipmi: Move remove_work to dedicated workqueue

net: dsa: b53: Add SPI ID table

Currently autoloading for SPI devices does not use the DT ID table, it
uses SPI modalises. Supporting OF modalises is going to be difficult if
not impractical, an attempt was made but has been reverted, so ensure
that module autoloading works for this driver by adding an id_table
listing the SPI IDs for everything.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gro: Fix inconsistent indenting

Eliminate the follow smatch warning:

net/ipv6/ip6_offload.c:249 ipv6_gro_receive() warn: inconsistent
indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: net: Correct case name

ipv6_addr_bind/ipv4_addr_bind are function names. Previously, bind test
would not be run by default due to the wrong case names

Fixes: 34d0302ab861 ("selftests: Add ipv6 address bind tests to fcnal-test")
Fixes: 75b2b2b3db4c ("selftests: Add ipv4 address bind tests to fcnal-test")
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/rds: correct socket tunable error in rds_tcp_tune()

Correct an error where setting /proc/sys/net/rds/tcp/rds_tcp_rcvbuf would
instead modify the socket's sk_sndbuf and would leave sk_rcvbuf untouched.

Fixes: c6a58ffed536 ("RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket")
Signed-off-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mctp: Don't let RTM_DELROUTE delete local routes

We need to test against the existing route type, not
the rtm_type in the netlink request.

Fixes: 83f0a0b7285b ("mctp: Specify route types, require rtm_type in RTM_*ROUTE messages")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: Keep smc_close_final rc during active close

When smc_close_final() returns error, the return code overwrites by
kernel_sock_shutdown() in smc_close_active(). The return code of
smc_close_final() is more important than kernel_sock_shutdown(), and it
will pass to userspace directly.

Fix it by keeping both return codes, if smc_close_final() raises an
error, return it or kernel_sock_shutdown()'s.

Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/
Fixes: 606a63c9783a ("net/smc: Ensure the active closing peer first closes clcsock")
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: drop bad optimization in reuse_tx_pools()

When trying to decide whether or not reuse existing rx/tx pools
we tried to allow a range of values for the pool parameters rather
than exact matches. This was intended to reuse the resources for
instance when switching between two VIO servers with different
default parameters.

But this optimization is incomplete and breaks when we try to
change the number of queues for instance. The optimization needs
to be updated, so drop it for now and simplify the code.

Fixes: bbd809305bc7 ("ibmvnic: Reuse tx pools when possible")
Reported-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: drop bad optimization in reuse_rx_pools()

When trying to decide whether or not reuse existing rx/tx pools
we tried to allow a range of values for the pool parameters rather
than exact matches. This was intended to reuse the resources for
instance when switching between two VIO servers with different
default parameters.

But this optimization is incomplete and breaks when we try to
change the number of queues for instance. The optimization needs
to be updated, so drop it for now and simplify the code.

Fixes: 489de956e7a2 ("ibmvnic: Reuse rx pools when possible")
Reported-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: fix wrong list_del in smc_lgr_cleanup_early

smc_lgr_cleanup_early() meant to delete the link
group from the link group list, but it deleted
the list head by mistake.

This may cause memory corruption since we didn't
remove the real link group from the list and later
memseted the link group structure.
We got a list corruption panic when testing:

[  231.277259] list_del corruption. prev->next should be ffff8881398a8000, but was 0000000000000000
[  231.278222] ------------[ cut here ]------------
[  231.278726] kernel BUG at lib/list_debug.c:53!
[  231.279326] invalid opcode: 0000 [#1] SMP NOPTI
[  231.279803] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.46+ #435
[  231.280466] Hardware name: Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014
[  231.281248] Workqueue: events smc_link_down_work
[  231.281732] RIP: 0010:__list_del_entry_valid+0x70/0x90
[  231.282258] Code: 4c 60 82 e8 7d cc 6a 00 0f 0b 48 89 fe 48 c7 c7 88 4c
60 82 e8 6c cc 6a 00 0f 0b 48 89 fe 48 c7 c7 c0 4c 60 82 e8 5b cc 6a 00 <0f>
0b 48 89 fe 48 c7 c7 00 4d 60 82 e8 4a cc 6a 00 0f 0b cc cc cc
[  231.284146] RSP: 0018:ffffc90000033d58 EFLAGS: 00010292
[  231.284685] RAX: 0000000000000054 RBX: ffff8881398a8000 RCX: 0000000000000000
[  231.285415] RDX: 0000000000000001 RSI: ffff88813bc18040 RDI: ffff88813bc18040
[  231.286141] RBP: ffffffff8305ad40 R08: 0000000000000003 R09: 0000000000000001
[  231.286873] R10: ffffffff82803da0 R11: ffffc90000033b90 R12: 0000000000000001
[  231.287606] R13: 0000000000000000 R14: ffff8881398a8000 R15: 0000000000000003
[  231.288337] FS:  0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
[  231.289160] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  231.289754] CR2: 0000000000e72058 CR3: 000000010fa96006 CR4: 00000000003706f0
[  231.290485] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  231.291211] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  231.291940] Call Trace:
[  231.292211]  smc_lgr_terminate_sched+0x53/0xa0
[  231.292677]  smc_switch_conns+0x75/0x6b0
[  231.293085]  ? update_load_avg+0x1a6/0x590
[  231.293517]  ? ttwu_do_wakeup+0x17/0x150
[  231.293907]  ? update_load_avg+0x1a6/0x590
[  231.294317]  ? newidle_balance+0xca/0x3d0
[  231.294716]  smcr_link_down+0x50/0x1a0
[  231.295090]  ? __wake_up_common_lock+0x77/0x90
[  231.295534]  smc_link_down_work+0x46/0x60
[  231.295933]  process_one_work+0x18b/0x350

Fixes: a0a62ee15a829 ("net/smc: separate locks for SMCD and SMCR link group lists")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix Comment of ETH_P_802_3_MIN

The description of ETH_P_802_3_MIN is misleading.
The value of EthernetType in Ethernet II frame is more than 0x0600,
the value of Length in 802.3 frame is less than 0x0600.

Signed-off-by: Xiayu Zhang <Xiayu.Zhang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ethernet: aquantia: Try MAC address from device tree

Apple M1 Mac minis (2020) with 10GE NICs do not have MAC address in the
card, but instead need to obtain MAC addresses from the device tree. In
this case the hardware will report an invalid MAC.

Currently atlantic driver does not query the DT for MAC address and will
randomly assign a MAC if the NIC doesn't have a permanent MAC burnt in.
This patch causes the driver to perfer a valid MAC address from OF (if
present) over HW self-reported MAC and only fall back to a random MAC
address when neither of them is valid.

Signed-off-by: Tianhao Chai <cth451@gmail.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Reviewed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: convert fib_num_tclassid_users to atomic_t

Before commit faa041a40b9f ("ipv4: Create cleanup helper for fib_nh")
changes to net->ipv4.fib_num_tclassid_users were protected by RTNL.

After the change, this is no longer the case, as free_fib_info_rcu()
runs after rcu grace period, without rtnl being held.

Fixes: faa041a40b9f ("ipv4: Create cleanup helper for fib_nh")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: avoid uninit-value from tcp_conn_request

A recent change triggers a KMSAN warning, because request
sockets do not initialize @sk_rx_queue_mapping field.

Add sk_rx_queue_update() helper to make our intent clear.

BUG: KMSAN: uninit-value in sk_rx_queue_set include/net/sock.h:1922 [inline]
BUG: KMSAN: uninit-value in tcp_conn_request+0x3bcc/0x4dc0 net/ipv4/tcp_input.c:6922
sk_rx_queue_set include/net/sock.h:1922 [inline]
tcp_conn_request+0x3bcc/0x4dc0 net/ipv4/tcp_input.c:6922
tcp_v4_conn_request+0x218/0x2a0 net/ipv4/tcp_ipv4.c:1528
tcp_rcv_state_process+0x2c5/0x3290 net/ipv4/tcp_input.c:6406
tcp_v4_do_rcv+0xb4e/0x1330 net/ipv4/tcp_ipv4.c:1738
tcp_v4_rcv+0x468d/0x4ed0 net/ipv4/tcp_ipv4.c:2100
ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204
ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:460 [inline]
ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline]
ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline]
ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609
ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644
__netif_receive_skb_list_ptype net/core/dev.c:5505 [inline]
__netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553
__netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605
netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696
gro_normal_list net/core/dev.c:5850 [inline]
napi_complete_done+0x579/0xdd0 net/core/dev.c:6587
virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline]
virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557
__napi_poll+0x14e/0xbc0 net/core/dev.c:7020
napi_poll net/core/dev.c:7087 [inline]
net_rx_action+0x824/0x1880 net/core/dev.c:7174
__do_softirq+0x1fe/0x7eb kernel/softirq.c:558
invoke_softirq+0xa4/0x130 kernel/softirq.c:432
__irq_exit_rcu kernel/softirq.c:636 [inline]
irq_exit_rcu+0x76/0x130 kernel/softirq.c:648
common_interrupt+0xb6/0xd0 arch/x86/kernel/irq.c:240
asm_common_interrupt+0x1e/0x40
smap_restore arch/x86/include/asm/smap.h:67 [inline]
get_shadow_origin_ptr mm/kmsan/instrumentation.c:31 [inline]
__msan_metadata_ptr_for_load_1+0x28/0x30 mm/kmsan/instrumentation.c:63
tomoyo_check_acl+0x1b0/0x630 security/tomoyo/domain.c:173
tomoyo_path_permission security/tomoyo/file.c:586 [inline]
tomoyo_check_open_permission+0x61f/0xe10 security/tomoyo/file.c:777
tomoyo_file_open+0x24f/0x2d0 security/tomoyo/tomoyo.c:311
security_file_open+0xb1/0x1f0 security/security.c:1635
do_dentry_open+0x4e4/0x1bf0 fs/open.c:809
vfs_open+0xaf/0xe0 fs/open.c:957
do_open fs/namei.c:3426 [inline]
path_openat+0x52f1/0x5dd0 fs/namei.c:3559
do_filp_open+0x306/0x760 fs/namei.c:3586
do_sys_openat2+0x263/0x8f0 fs/open.c:1212
do_sys_open fs/open.c:1228 [inline]
__do_sys_open fs/open.c:1236 [inline]
__se_sys_open fs/open.c:1232 [inline]
__x64_sys_open+0x314/0x380 fs/open.c:1232
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:
__alloc_pages+0xbc7/0x10a0 mm/page_alloc.c:5409
alloc_pages+0x8a5/0xb80
alloc_slab_page mm/slub.c:1810 [inline]
allocate_slab+0x287/0x1c20 mm/slub.c:1947
new_slab mm/slub.c:2010 [inline]
___slab_alloc+0xbdf/0x1e90 mm/slub.c:3039
__slab_alloc mm/slub.c:3126 [inline]
slab_alloc_node mm/slub.c:3217 [inline]
slab_alloc mm/slub.c:3259 [inline]
kmem_cache_alloc+0xbb3/0x11c0 mm/slub.c:3264
reqsk_alloc include/net/request_sock.h:91 [inline]
inet_reqsk_alloc+0xaf/0x8b0 net/ipv4/tcp_input.c:6712
tcp_conn_request+0x910/0x4dc0 net/ipv4/tcp_input.c:6852
tcp_v4_conn_request+0x218/0x2a0 net/ipv4/tcp_ipv4.c:1528
tcp_rcv_state_process+0x2c5/0x3290 net/ipv4/tcp_input.c:6406
tcp_v4_do_rcv+0xb4e/0x1330 net/ipv4/tcp_ipv4.c:1738
tcp_v4_rcv+0x468d/0x4ed0 net/ipv4/tcp_ipv4.c:2100
ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204
ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:460 [inline]
ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline]
ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline]
ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609
ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644
__netif_receive_skb_list_ptype net/core/dev.c:5505 [inline]
__netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553
__netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605
netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696
gro_normal_list net/core/dev.c:5850 [inline]
napi_complete_done+0x579/0xdd0 net/core/dev.c:6587
virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline]
virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557
__napi_poll+0x14e/0xbc0 net/core/dev.c:7020
napi_poll net/core/dev.c:7087 [inline]
net_rx_action+0x824/0x1880 net/core/dev.c:7174
__do_softirq+0x1fe/0x7eb kernel/softirq.c:558

Fixes: 342159ee394d ("net: avoid dirtying sk->sk_rx_queue_mapping")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20211130182939.2584764-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: annotate data-races on txq->xmit_lock_owner

syzbot found that __dev_queue_xmit() is reading txq->xmit_lock_owner
without annotations.

No serious issue there, let's document what is happening there.

BUG: KCSAN: data-race in __dev_queue_xmit / __dev_queue_xmit

write to 0xffff888139d09484 of 4 bytes by interrupt on cpu 0:
__netif_tx_unlock include/linux/netdevice.h:4437 [inline]
__dev_queue_xmit+0x948/0xf70 net/core/dev.c:4229
dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265
macvlan_queue_xmit drivers/net/macvlan.c:543 [inline]
macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567
__netdev_start_xmit include/linux/netdevice.h:4987 [inline]
netdev_start_xmit include/linux/netdevice.h:5001 [inline]
xmit_one+0x105/0x2f0 net/core/dev.c:3590
dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606
sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342
__dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817
__dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194
dev_queue_xmit+0x13/0x20 net/core/dev.c:4259
neigh_hh_output include/net/neighbour.h:511 [inline]
neigh_output include/net/neighbour.h:525 [inline]
ip6_finish_output2+0x995/0xbb0 net/ipv6/ip6_output.c:126
__ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224
dst_output include/net/dst.h:450 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508
ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702
addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898
call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421
expire_timers+0x116/0x240 kernel/time/timer.c:1466
__run_timers+0x368/0x410 kernel/time/timer.c:1734
run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747
__do_softirq+0x158/0x2de kernel/softirq.c:558
__irq_exit_rcu kernel/softirq.c:636 [inline]
irq_exit_rcu+0x37/0x70 kernel/softirq.c:648
sysvec_apic_timer_interrupt+0x3e/0xb0 arch/x86/kernel/apic/apic.c:1097
asm_sysvec_apic_timer_interrupt+0x12/0x20

read to 0xffff888139d09484 of 4 bytes by interrupt on cpu 1:
__dev_queue_xmit+0x5e3/0xf70 net/core/dev.c:4213
dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265
macvlan_queue_xmit drivers/net/macvlan.c:543 [inline]
macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567
__netdev_start_xmit include/linux/netdevice.h:4987 [inline]
netdev_start_xmit include/linux/netdevice.h:5001 [inline]
xmit_one+0x105/0x2f0 net/core/dev.c:3590
dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606
sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342
__dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817
__dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194
dev_queue_xmit+0x13/0x20 net/core/dev.c:4259
neigh_resolve_output+0x3db/0x410 net/core/neighbour.c:1523
neigh_output include/net/neighbour.h:527 [inline]
ip6_finish_output2+0x9be/0xbb0 net/ipv6/ip6_output.c:126
__ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224
dst_output include/net/dst.h:450 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508
ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702
addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898
call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421
expire_timers+0x116/0x240 kernel/time/timer.c:1466
__run_timers+0x368/0x410 kernel/time/timer.c:1734
run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747
__do_softirq+0x158/0x2de kernel/softirq.c:558
__irq_exit_rcu kernel/softirq.c:636 [inline]
irq_exit_rcu+0x37/0x70 kernel/softirq.c:648
sysvec_apic_timer_interrupt+0x8d/0xb0 arch/x86/kernel/apic/apic.c:1097
asm_sysvec_apic_timer_interrupt+0x12/0x20
kcsan_setup_watchpoint+0x94/0x420 kernel/kcsan/core.c:443
folio_test_anon include/linux/page-flags.h:581 [inline]
PageAnon include/linux/page-flags.h:586 [inline]
zap_pte_range+0x5ac/0x10e0 mm/memory.c:1347
zap_pmd_range mm/memory.c:1467 [inline]
zap_pud_range mm/memory.c:1496 [inline]
zap_p4d_range mm/memory.c:1517 [inline]
unmap_page_range+0x2dc/0x3d0 mm/memory.c:1538
unmap_single_vma+0x157/0x210 mm/memory.c:1583
unmap_vmas+0xd0/0x180 mm/memory.c:1615
exit_mmap+0x23d/0x470 mm/mmap.c:3170
__mmput+0x27/0x1b0 kernel/fork.c:1113
mmput+0x3d/0x50 kernel/fork.c:1134
exit_mm+0xdb/0x170 kernel/exit.c:507
do_exit+0x608/0x17a0 kernel/exit.c:819
do_group_exit+0xce/0x180 kernel/exit.c:929
get_signal+0xfc3/0x1550 kernel/signal.c:2852
arch_do_signal_or_restart+0x8c/0x2e0 arch/x86/kernel/signal.c:868
handle_signal_work kernel/entry/common.c:148 [inline]
exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
exit_to_user_mode_prepare+0x113/0x190 kernel/entry/common.c:207
__syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300
do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00000000 -> 0xffffffff

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 28712 Comm: syz-executor.0 Tainted: G W 5.16.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20211130170155.2331929-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

octeontx2-af: Fix a memleak bug in rvu_mbox_init()

In rvu_mbox_init(), mbox_regions is not freed or passed out
under the switch-default region, which could lead to a memory leak.

Fix this bug by changing 'return err' to 'goto free_regions'.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_OCTEONTX2_AF=y show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: 98c561116360 (“octeontx2-af: cn10k: Add mbox support for CN10K platform”)
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130165039.192426-1-zhou1615@umn.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()

In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and
tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv().
After that mlx4_en_alloc_resources() is called and there is a dereference
of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to
a use after free problem on failure of mlx4_en_copy_priv().

Fix this bug by adding a check of mlx4_en_copy_priv()

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_MLX4_EN=m show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: ec25bc04ed8e ("net/mlx4_en: Add resilience in low memory systems")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20211130164438.190591-1-zhou1615@umn.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit

IPCB/IP6CB need to be initialized when processing outbound v4 or v6 pkts
in the codepath of vrf device xmit function so that leftover garbage
doesn't cause futher code that uses the CB to incorrectly process the
pkt.

One occasion of the issue might occur when MPLS route uses the vrf
device as the outgoing device such as when the route is added using "ip
-f mpls route add <label> dev <vrf>" command.

The problems seems to exist since day one. Hence I put the day one
commits on the Fixes tags.

Fixes: 193125dbd8eb ("net: Introduce VRF device driver")
Fixes: 35402e313663 ("net: Add IPv6 support to VRF device")
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211130162637.3249-1-ssuryaextr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()

In qlcnic_83xx_add_rings(), the indirect function of
ahw->hw_ops->alloc_mbx_args will be called to allocate memory for
cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(),
which could lead to a NULL pointer dereference on failure of the
indirect function like qlcnic_83xx_alloc_mbx_args().

Fix this bug by adding a check of alloc_mbx_args(), this patch
imitates the logic of mbx_cmd()'s failure handling.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_QLCNIC=m show no new warnings, and our
static analyzer no longer warns about this code.

Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130110848.109026-1-zhou1615@umn.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

kprobes: Limit max data_size of the kretprobe instances

The 'kprobe::data_size' is unsigned, thus it can not be negative. But if
user sets it enough big number (e.g. (size_t)-8), the result of 'data_size
+ sizeof(struct kretprobe_instance)' becomes smaller than sizeof(struct
kretprobe_instance) or zero. In result, the kretprobe_instance are
allocated without enough memory, and kretprobe accesses outside of
allocated memory.

To avoid this issue, introduce a max limitation of the
kretprobe::data_size. 4KB per instance should be OK.

Link: https://lkml.kernel.org/r/163836995040.432120.10322772773821182925.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: f47cd9b553aa ("kprobes: kretprobe user entry-handler")
Reported-by: zhangyue <zhangyue1@kylinos.cn>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Fix a kmemleak false positive in tracing_map

Doing the command:
  echo 'hist:key=common_pid.execname,common_timestamp' > /sys/kernel/debug/tracing/events/xxx/trigger

Triggers many kmemleak reports:

unreferenced object 0xffff0000c7ea4980 (size 128):
  comm "bash", pid 338, jiffies 4294912626 (age 9339.324s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000f3469921>] kmem_cache_alloc_trace+0x4c0/0x6f0
    [<0000000054ca40c3>] hist_trigger_elt_data_alloc+0x140/0x178
    [<00000000633bd154>] tracing_map_init+0x1f8/0x268
    [<000000007e814ab9>] event_hist_trigger_func+0xca0/0x1ad0
    [<00000000bf8520ed>] trigger_process_regex+0xd4/0x128
    [<00000000f549355a>] event_trigger_write+0x7c/0x120
    [<00000000b80f898d>] vfs_write+0xc4/0x380
    [<00000000823e1055>] ksys_write+0x74/0xf8
    [<000000008a9374aa>] __arm64_sys_write+0x24/0x30
    [<0000000087124017>] do_el0_svc+0x88/0x1c0
    [<00000000efd0dcd1>] el0_svc+0x1c/0x28
    [<00000000dbfba9b3>] el0_sync_handler+0x88/0xc0
    [<00000000e7399680>] el0_sync+0x148/0x180
unreferenced object 0xffff0000c7ea4980 (size 128):
  comm "bash", pid 338, jiffies 4294912626 (age 9339.324s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000f3469921>] kmem_cache_alloc_trace+0x4c0/0x6f0
    [<0000000054ca40c3>] hist_trigger_elt_data_alloc+0x140/0x178
    [<00000000633bd154>] tracing_map_init+0x1f8/0x268
    [<000000007e814ab9>] event_hist_trigger_func+0xca0/0x1ad0
    [<00000000bf8520ed>] trigger_process_regex+0xd4/0x128
    [<00000000f549355a>] event_trigger_write+0x7c/0x120
    [<00000000b80f898d>] vfs_write+0xc4/0x380
    [<00000000823e1055>] ksys_write+0x74/0xf8
    [<000000008a9374aa>] __arm64_sys_write+0x24/0x30
    [<0000000087124017>] do_el0_svc+0x88/0x1c0
    [<00000000efd0dcd1>] el0_svc+0x1c/0x28
    [<00000000dbfba9b3>] el0_sync_handler+0x88/0xc0
    [<00000000e7399680>] el0_sync+0x148/0x180

The reason is elts->pages[i] is alloced by get_zeroed_page.
and kmemleak will not scan the area alloced by get_zeroed_page.
The address stored in elts->pages will be regarded as leaked.

That is, the elts->pages[i] will have pointers loaded onto it as well, and
without telling kmemleak about it, those pointers will look like memory
without a reference.

To fix this, call kmemleak_alloc to tell kmemleak to scan elts->pages[i]

Link: https://lkml.kernel.org/r/20211124140801.87121-1-chenjun102@huawei.com
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing/histograms: String compares should not care about signed values

When comparing two strings for the "onmatch" histogram trigger, fields
that are strings use string comparisons, which do not care about being
signed or not.

Do not fail to match two string fields if one is unsigned char array and
the other is a signed char array.

Link: https://lore.kernel.org/all/20211129123043.5cfd687a@gandalf.local.home/
Cc: stable@vgerk.kernel.org
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Yafang Shao <laoar.shao@gmail.com>
Fixes: b05e89ae7cf3b ("tracing: Accept different type for synthetic event fields")
Reviewed-by: Masami Hiramatsu <mhiramatsu@kernel.org>
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Merge tag 'sound-5.16-rc4' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A collection of small fixes. A large series is found for ASoC tegra
  drivers to correct the control element handlings, while others are
  mostly for device-specific quirks and fix-ups"

* tag 'sound-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
  ALSA: hda/hdmi: fix HDA codec entry table order for ADL-P
  ALSA: hda: Add Intel DG2 PCI ID and HDMI codec vid
  ALSA: hda/cs8409: Set PMSG_ON earlier inside cs8409 driver
  ASoC: SOF: hda: reset DAI widget before reconfiguring it
  ASoC: cs35l41: Set the max SPI speed for the whole device
  ALSA: intel-dsp-config: add quirk for CML devices based on ES8336 codec
  ASoC: Intel: soc-acpi: add entry for ESSX8336 on CML
  ASoC: rk817: Add module alias for rk817-codec
  ASoC: soc-acpi: Set mach->id field on comp_ids matches
  ASoC: tegra: Fix kcontrol put callback in Mixer
  ASoC: tegra: Fix kcontrol put callback in ADX
  ASoC: tegra: Fix kcontrol put callback in AMX
  ASoC: tegra: Fix kcontrol put callback in SFC
  ASoC: tegra: Fix kcontrol put callback in MVC
  ASoC: tegra: Fix kcontrol put callback in AHUB
  ASoC: tegra: Fix kcontrol put callback in DSPK
  ASoC: tegra: Fix kcontrol put callback in DMIC
  ASoC: tegra: Fix kcontrol put callback in I2S
  ASoC: tegra: Fix kcontrol put callback in ADMAIF
  ASoC: tegra: Fix wrong value type in MVC
  ...

Merge tag 'wireless-drivers-2021-12-01' of git://git./linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.16

First set of fixes for v5.16. Mostly crash and driver initialisation
fixes, the fix for rtw89 being most important.

iwlwifi

* compiler, lockdep and smatch warning fixes

* fix for a rare driver initialisation failure

* fix a memory leak

rtw89

* fix const buffer modification causing a kernel crash

mt76

* fix null pointer access

* fix idr leak

rt2x00

* fix driver initialisation errors, a regression since v5.2-rc1
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-fixes-2021-11-30' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2021-11-30

This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mv88e6xxx-fixes'

Marek Behún says:

====================
mv88e6xxx fixes (mainly 88E6393X family)

sending v2 of these fixes.

Original cover letter:

So I managed to discovered how to fix inband AN for 2500base-x mode on
88E6393x (Amethyst) family.

This series fixes application of erratum 4.8, adds fix for erratum 5.2,
adds support for completely disablign SerDes receiver / transmitter,
fixes inband AN for 2500base-x mode by using 1000base-x mode and simply
changing frequeny to 3.125 GHz, all this for 88E6393X.

The last commit fixes linking when link partner has AN disabled and the
device invokes the AN bypass feature. Currently we fail to link in this
case.

Changes since v1:
- fixed wrong operator in patch 3 (thanks Russell)
- added more comments about why BMCR_ANENABLE is used in patch 6 (thanks
  Russell)
- updated some return statements from
     if (something)
       return func();
     return 0;
  to
     if (something)
       err = func();
     return err;
  (err is set to 0 before the condition)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed

Function mv88e6xxx_serdes_pcs_get_state() currently does not report link
up if AN is enabled, Link bit is set, but Speed and Duplex Resolved bit
is not set, which testing shows is the case for when auto-negotiation
was bypassed (we have AN enabled but link partner does not).

An example of such link partner is Marvell 88X3310 PHY, when put into
the mode where host interface changes between 10gbase-r, 5gbase-r,
2500base-x and sgmii according to copper speed. The 88X3310 does not
enable AN in 2500base-x, and so SerDes on mv88e6xxx currently does not
link with it.

Fix this.

Fixes: a5a6858b793f ("net: dsa: mv88e6xxx: extend phylink to Serdes PHYs")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family

Inband AN is broken on Amethyst in 2500base-x mode when set by standard
mechanism (via cmode).

(There probably is some weird setting done by default in the switch for
this mode that make it cycle in some state or something, because when
the peer is the mvneta controller, it receives link change interrupts
every ~0.3ms, but the link is always down.)

Get around this by configuring the PCS mode to 1000base-x (where inband
AN works), and then changing the SerDes frequency while SerDes
transmitter and receiver are disabled, before enabling SerDes PHY. After
disabling SerDes PHY, change the PCS mode back to 2500base-x, to avoid
confusing the device (if we leave it at 1000base-x PCS mode but with
different frequency, and then change cmode to sgmii, the device won't
change the frequency because it thinks it already has the correct one).

The register which changes the frequency is undocumented. I discovered
it by going through all registers in the ranges 4.f000-4.f100 and
1e.8000-1e.8200 for all SerDes cmodes (sgmii, 1000base-x, 2500base-x,
5gbase-r, 10gbase-r, usxgmii) and filtering out registers that didn't
make sense (the value was the same for modes which have different
frequency). The result of this was:

    reg   sgmii 1000base-x 2500base-x 5gbase-r 10gbase-r usxgmii
  04.f002  005b       0058       0059     005c      005d    005f
  04.f076  3000       0000       1000     4000      5000    7000
  04.f07c  0950       0950       1850     0550      0150    0150
  1e.8000  0059       0059       0058     0055      0051    0051
  1e.8140  0e20       0e20       0e28     0e21      0e42    0e42

Register 04.f002 is the documented Port Operational Confiuration
register, it's last 3 bits select PCS type, so changing this register
also changes the frequency to the appropriate value.

Registers 04.f076 and 04.f07c are not writable.

Undocumented register 1e.8000 was the one: changing bits 3:0 from 9 to 8
changed SerDes frequency to 3.125 GHz, while leaving the value of PCS
mode in register 04.f002.2:0 at 1000base-x. Inband autonegotiation
started working correctly.

(I didn't try anything with register 1e.8140 since 1e.8000 solved the
problem.)

Since I don't have documentation for this register 1e.8000.3:0, I am
using the constants without names, but my hypothesis is that this
register selects PHY frequency. If in the future I have access to an
oscilloscope able to handle these frequencies, I will try to test this
hypothesis.

Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: Add fix for erratum 5.2 of 88E6393X family

Add fix for erratum 5.2 of the 88E6393X (Amethyst) family: for 10gbase-r
mode, some undocumented registers need to be written some special
values.

Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: Save power by disabling SerDes trasmitter and receiver

Save power on 88E6393X by disabling SerDes receiver and transmitter
after SerDes is SerDes is disabled.

Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org # de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: Drop unnecessary check in mv88e6393x_serdes_erratum_4_6()

The check for lane is unnecessary, since the function is called only
with allowed lane argument.

Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: Fix application of erratum 4.8 for 88E6393X

According to SERDES scripts for 88E6393X, erratum 4.8 has to be applied
every time before SerDes is powered on.

Split the code for erratum 4.8 into separate function and call it in
mv88e6393x_serdes_power().

Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e: SHAMPO, Fix constant expression result

mlx5e_build_shampo_hd_umr uses counters i and index incorrectly
as unsigned, thus the err state err_unmap could stuck in endless loop.
Change i to int to solve the first issue.
Reduce index check to solve the second issue, the caller function
validates that index could not rotate.

Fixes: 64509b052525 ("net/mlx5e: Add data path for SHAMPO feature")
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Fix access to a non-supported register

Validate MRTC register is supported before triggering a delayed work
which accesses it.

Fixes: 5a1023deeed0 ("net/mlx5: Add periodic update of host time to firmware")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Fix too early queueing of log timestamp work

The log timestamp work should not be queued before the command interface
is initialized, move it to a later stage in the init flow.

Fixes: 5a1023deeed0 ("net/mlx5: Add periodic update of host time to firmware")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Fix use after free in mlx5_health_wait_pci_up

The device health recovery flow calls mlx5_health_wait_pci_up() which
queries the device for FW_RESET timeout after freeing the device
timeouts structure on mlx5_function_teardown(). Fix this bug by moving
timeouts structure init/cleanup to the device's init/uninit phases.
Since it is necessary to reset default software timeouts on function
reload, extract setting of defaults values from mlx5_tout_init() and
call mlx5_tout_set_def_val() directly from mlx5_function_setup().

Fixes: 5945e1adeab5 ("net/mlx5: Read timeout values from init segment")
Reported by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: E-Switch, Use indirect table only if all destinations support it

When adding rule with multiple destinations, indirect table is used for all of
the destinations if at least one of the destinations support it, this can cause
creation of invalid indirect tables for the destinations that doesn't support it.

Fixed it by using indirect table only if all destinations support it.

Fixes: a508728a4c8b ("net/mlx5e: VF tunnel RX traffic offloading")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: E-Switch, Check group pointer before reading bw_share value

If log_esw_max_sched_depth is not supported group pointer of the vport
is NULL. Hence, check the pointer before reading bw_share value.

Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: E-Switch, fix single FDB creation on BlueField

Always use MLX5_FLOW_TABLE_OTHER_VPORT flag when creating egress ACL
table for single FDB. Not doing so on BlueField will make firmware fail
the command. On BlueField the E-Switch manager is the ECPF (vport 0xFFFE)
which is filled in the flow table creation command but as the
other_vport field wasn't set the firmware complains about a bad parameter.

This is different from a regular HCA where the E-Switch manager vport is
the PF (vport 0x0). Passing MLX5_FLOW_TABLE_OTHER_VPORT will make the
firmware happy both on BlueField and on regular HCAs without special
condition for each.

This fixes the bellow firmware syndrome:
mlx5_cmd_check:819:(pid 571): CREATE_FLOW_TABLE(0x930) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x754a4)

Fixes: db202995f503 ("net/mlx5: E-Switch, add logic to enable shared FDB")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: E-switch, Respect BW share of the new group

To enable transmit schduler on vport FW require non-zero configuration
for vport's TSAR. If vport added to the group which has configured BW
share value and TX rate values of the vport are zero, then scheduler
wouldn't be enabled on this vport.
Fix that by calling BW normalization if BW share of the new group is
configured.

Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Lag, Fix recreation of VF LAG

Driver needs to nullify the port select attributes of the LAG when
port selection is destroyed, otherwise it breaks recreation of the
LAG.
It fixes the below kernel oops:

[  587.906377] BUG: kernel NULL pointer dereference, address: 0000000000000008
[  587.908843] #PF: supervisor read access in kernel mode
[  587.910730] #PF: error_code(0x0000) - not-present page
[  587.912580] PGD 0 P4D 0
[  587.913632] Oops: 0000 [#1] SMP PTI
[  587.914644] CPU: 5 PID: 165 Comm: kworker/u20:5 Tainted: G           OE     5.9.0_mlnx #1
[  587.916152] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  587.918332] Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core]
[  587.919479] RIP: 0010:mlx5_del_flow_rules+0x10/0x270 [mlx5_core]
[  587.920568] mlx5_core 0000:08:00.1 enp8s0f1: Link up
[  587.920680] Code: c0 09 80 a0 e8 cf 42 a4 e0 48 c7 c3 f4 ff ff ff e8 8a 88 dd e0 e9 ab fe ff ff 0f 1f 44 00 00 41 56 41 55 49 89 fd 41 54 55 53 <48> 8b 47 08 48 8b 68 28 48 85 ed 74 2e 48 8d 7d 38 e8 6a 64 34 e1
[  587.925116] bond0: (slave enp8s0f1): Enslaving as an active interface with an up link
[  587.930415] RSP: 0018:ffffc9000048fd88 EFLAGS: 00010282
[  587.930417] RAX: ffff88846c14fac0 RBX: ffff88846cddcb80 RCX: 0000000080400007
[  587.930417] RDX: 0000000080400008 RSI: ffff88846cddcb80 RDI: 0000000000000000
[  587.930419] RBP: ffff88845fd80140 R08: 0000000000000001 R09: ffffffffa074ba00
[  587.938132] R10: ffff88846c14fec0 R11: 0000000000000001 R12: ffff88846c122f10
[  587.939473] R13: 0000000000000000 R14: 0000000000000001 R15: ffff88846d7a0000
[  587.940800] FS:  0000000000000000(0000) GS:ffff88846fa80000(0000) knlGS:0000000000000000
[  587.942416] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  587.943536] CR2: 0000000000000008 CR3: 000000000240a002 CR4: 0000000000770ee0
[  587.944904] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  587.946308] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  587.947639] PKRU: 55555554
[  587.948236] Call Trace:
[  587.948834]  mlx5_lag_destroy_definer.isra.3+0x16/0x90 [mlx5_core]
[  587.950033]  mlx5_lag_destroy_definers+0x5b/0x80 [mlx5_core]
[  587.951128]  mlx5_deactivate_lag+0x6e/0x80 [mlx5_core]
[  587.952146]  mlx5_do_bond+0x150/0x450 [mlx5_core]
[  587.953086]  mlx5_do_bond_work+0x3e/0x50 [mlx5_core]
[  587.954086]  process_one_work+0x1eb/0x3e0
[  587.954899]  worker_thread+0x2d/0x3c0
[  587.955656]  ? process_one_work+0x3e0/0x3e0
[  587.956493]  kthread+0x115/0x130
[  587.957174]  ? kthread_park+0x90/0x90
[  587.957929]  ret_from_fork+0x1f/0x30
[  587.973055] ---[ end trace 71ccd6eca89f5513 ]---

Fixes: b7267869e923 ("net/mlx5: Lag, add support to create/destroy/modify port selection")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Move MODIFY_RQT command to ignore list in internal error state

When the device is in internal error state, command interface isn't
accessible and the driver decides which commands to fail and which
to ignore.

Move the MODIFY_RQT command to the ignore list in order to avoid
the following redundant warning messages in internal error state:

mlx5_core 0000:82:00.1: mlx5e_rss_disable:419:(pid 23754): Failed to redirect RQT 0x0 to drop RQ 0xc00848: err = -5
mlx5_core 0000:82:00.1: mlx5e_rx_res_channels_deactivate:598:(pid 23754): Failed to redirect direct RQT 0x1 to drop RQ 0xc00848 (channel 0): err = -5
mlx5_core 0000:82:00.1: mlx5e_rx_res_channels_deactivate:607:(pid 23754): Failed to redirect XSK RQT 0x19 to drop RQ 0xc00848 (channel 0): err = -5

Fixes: 43ec0f41fa73 ("net/mlx5e: Hide all implementation details of mlx5e_rx_res")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Sync TIR params updates against concurrent create/modify

Transport Interface Receive (TIR) objects perform the packet processing and
reassembly and is also responsible for demultiplexing the packets into the
different RQs.

There are certain TIR context attributes that propagate to the pointed RQs
and applied to them (like packet_merge offloads (LRO/SHAMPO) and
tunneled_offload_en). When TIRs do not agree on attributes values, a "last
one wins" policy is applied. Hence, if not synced properly, a race between
TIR params update and a concurrent TIR create/modify operation might yield
to a mismatch between the shadow parameters in SW and the actual applied
state of the RQs in HW.

tunneled_offload_en is a fixed attribute per profile, while packet merge
offload state might be toggled and get out-of-sync. When this happens,
packet_merge offload might be working although not requested, or the
opposite.

All updates to packet_merge state and all create/modify operations of
regular redirection/steering TIRs are done under the same priv->state_lock,
so they do not run in parallel, and no race is possible.

However, there are other kind of TIRs (acceleration offloads TIRs, like TLS
TIRs) which are created on demand for each new connection without holding
the coarse priv->state_lock, hence might race.

Fix this by synchronizing all packet_merge state reads and writes against
all TIR create/modify operations. Include the modify operations of the
regular redirection steering TIRs under the new lock, for better code
layering and division of responsibilities.

Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Fix missing IPsec statistics on uplink representor

The cited patch added the IPsec support to uplink representor, however
as uplink representors have his private statistics where IPsec stats
is not part of it, that effectively makes IPsec stats hidden when uplink
representor stats queried.

Resolve by adding IPsec stats to uplink representor private statistics.

Fixes: 5589b8f1a2c7 ("net/mlx5e: Add IPsec support to uplink representor")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Alaa Hleihel <alaa@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: IPsec: Fix Software parser inner l3 type setting in case of encapsulation

Current code wrongly uses the skb->protocol field which reflects the
outer l3 protocol to set the inner l3 type in Software Parser (SWP)
fields settings in the ethernet segment (eseg) in flows where inner
l3 exists like in Vxlan over ESP flow, the above method wrongly use
the outer protocol type instead of the inner one. thus breaking cases
where inner and outer headers have different protocols.

Fix by setting the inner l3 type in SWP according to the inner l3 ip
header version.

Fixes: 2ac9cfe78223 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

natsemi: xtensa: fix section mismatch warnings

Fix section mismatch warnings in xtsonic. The first one appears to be
bogus and after fixing the second one, the first one is gone.

WARNING: modpost: vmlinux.o(.text+0x529adc): Section mismatch in reference from the function sonic_get_stats() to the function .init.text:set_reset_devices()
The function sonic_get_stats() references
the function __init set_reset_devices().
This is often because sonic_get_stats lacks a __init
annotation or the annotation of set_reset_devices is wrong.

WARNING: modpost: vmlinux.o(.text+0x529b3b): Section mismatch in reference from the function xtsonic_probe() to the function .init.text:sonic_probe1()
The function xtsonic_probe() references
the function __init sonic_probe1().
This is often because xtsonic_probe lacks a __init
annotation or the annotation of sonic_probe1 is wrong.

Fixes: 74f2a5f0ef64 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Chris Zankel <chris@zankel.net>
Cc: linux-xtensa@linux-xtensa.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20211130063947.7529-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: netlink: af_netlink: Prevent empty skb by adding a check on len.

Adding a check on len parameter to avoid empty skb. This prevents a
division error in netem_enqueue function which is caused when skb->len=0
and skb->data_len=0 in the randomized corruption step as shown below.

skb->data[prandom_u32() % skb_headlen(skb)] ^= 1<<(prandom_u32() % 8);

Crash Report:
[  343.170349] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family
0 port 6081 - 0
[  343.216110] netem: version 1.3
[  343.235841] divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
[  343.236680] CPU: 3 PID: 4288 Comm: reproducer Not tainted 5.16.0-rc1+
[  343.237569] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.11.0-2.el7 04/01/2014
[  343.238707] RIP: 0010:netem_enqueue+0x1590/0x33c0 [sch_netem]
[  343.239499] Code: 89 85 58 ff ff ff e8 5f 5d e9 d3 48 8b b5 48 ff ff
ff 8b 8d 50 ff ff ff 8b 85 58 ff ff ff 48 8b bd 70 ff ff ff 31 d2 2b 4f
74 <f7> f1 48 b8 00 00 00 00 00 fc ff df 49 01 d5 4c 89 e9 48 c1 e9 03
[  343.241883] RSP: 0018:ffff88800bcd7368 EFLAGS: 00010246
[  343.242589] RAX: 00000000ba7c0a9c RBX: 0000000000000001 RCX:
0000000000000000
[  343.243542] RDX: 0000000000000000 RSI: ffff88800f8edb10 RDI:
ffff88800f8eda40
[  343.244474] RBP: ffff88800bcd7458 R08: 0000000000000000 R09:
ffffffff94fb8445
[  343.245403] R10: ffffffff94fb8336 R11: ffffffff94fb8445 R12:
0000000000000000
[  343.246355] R13: ffff88800a5a7000 R14: ffff88800a5b5800 R15:
0000000000000020
[  343.247291] FS:  00007fdde2bd7700(0000) GS:ffff888109780000(0000)
knlGS:0000000000000000
[  343.248350] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  343.249120] CR2: 00000000200000c0 CR3: 000000000ef4c000 CR4:
00000000000006e0
[  343.250076] Call Trace:
[  343.250423]  <TASK>
[  343.250713]  ? memcpy+0x4d/0x60
[  343.251162]  ? netem_init+0xa0/0xa0 [sch_netem]
[  343.251795]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.252443]  netem_enqueue+0xe28/0x33c0 [sch_netem]
[  343.253102]  ? stack_trace_save+0x87/0xb0
[  343.253655]  ? filter_irq_stacks+0xb0/0xb0
[  343.254220]  ? netem_init+0xa0/0xa0 [sch_netem]
[  343.254837]  ? __kasan_check_write+0x14/0x20
[  343.255418]  ? _raw_spin_lock+0x88/0xd6
[  343.255953]  dev_qdisc_enqueue+0x50/0x180
[  343.256508]  __dev_queue_xmit+0x1a7e/0x3090
[  343.257083]  ? netdev_core_pick_tx+0x300/0x300
[  343.257690]  ? check_kcov_mode+0x10/0x40
[  343.258219]  ? _raw_spin_unlock_irqrestore+0x29/0x40
[  343.258899]  ? __kasan_init_slab_obj+0x24/0x30
[  343.259529]  ? setup_object.isra.71+0x23/0x90
[  343.260121]  ? new_slab+0x26e/0x4b0
[  343.260609]  ? kasan_poison+0x3a/0x50
[  343.261118]  ? kasan_unpoison+0x28/0x50
[  343.261637]  ? __kasan_slab_alloc+0x71/0x90
[  343.262214]  ? memcpy+0x4d/0x60
[  343.262674]  ? write_comp_data+0x2f/0x90
[  343.263209]  ? __kasan_check_write+0x14/0x20
[  343.263802]  ? __skb_clone+0x5d6/0x840
[  343.264329]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.264958]  dev_queue_xmit+0x1c/0x20
[  343.265470]  netlink_deliver_tap+0x652/0x9c0
[  343.266067]  netlink_unicast+0x5a0/0x7f0
[  343.266608]  ? netlink_attachskb+0x860/0x860
[  343.267183]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.267820]  ? write_comp_data+0x2f/0x90
[  343.268367]  netlink_sendmsg+0x922/0xe80
[  343.268899]  ? netlink_unicast+0x7f0/0x7f0
[  343.269472]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.270099]  ? write_comp_data+0x2f/0x90
[  343.270644]  ? netlink_unicast+0x7f0/0x7f0
[  343.271210]  sock_sendmsg+0x155/0x190
[  343.271721]  ____sys_sendmsg+0x75f/0x8f0
[  343.272262]  ? kernel_sendmsg+0x60/0x60
[  343.272788]  ? write_comp_data+0x2f/0x90
[  343.273332]  ? write_comp_data+0x2f/0x90
[  343.273869]  ___sys_sendmsg+0x10f/0x190
[  343.274405]  ? sendmsg_copy_msghdr+0x80/0x80
[  343.274984]  ? slab_post_alloc_hook+0x70/0x230
[  343.275597]  ? futex_wait_setup+0x240/0x240
[  343.276175]  ? security_file_alloc+0x3e/0x170
[  343.276779]  ? write_comp_data+0x2f/0x90
[  343.277313]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.277969]  ? write_comp_data+0x2f/0x90
[  343.278515]  ? __fget_files+0x1ad/0x260
[  343.279048]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.279685]  ? write_comp_data+0x2f/0x90
[  343.280234]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.280874]  ? sockfd_lookup_light+0xd1/0x190
[  343.281481]  __sys_sendmsg+0x118/0x200
[  343.281998]  ? __sys_sendmsg_sock+0x40/0x40
[  343.282578]  ? alloc_fd+0x229/0x5e0
[  343.283070]  ? write_comp_data+0x2f/0x90
[  343.283610]  ? write_comp_data+0x2f/0x90
[  343.284135]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.284776]  ? ktime_get_coarse_real_ts64+0xb8/0xf0
[  343.285450]  __x64_sys_sendmsg+0x7d/0xc0
[  343.285981]  ? syscall_enter_from_user_mode+0x4d/0x70
[  343.286664]  do_syscall_64+0x3a/0x80
[  343.287158]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  343.287850] RIP: 0033:0x7fdde24cf289
[  343.288344] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00
48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b7 db 2c 00 f7 d8 64 89 01 48
[  343.290729] RSP: 002b:00007fdde2bd6d98 EFLAGS: 00000246 ORIG_RAX:
000000000000002e
[  343.291730] RAX: ffffffffffffffda RBX: 0000000000000000 RCX:
00007fdde24cf289
[  343.292673] RDX: 0000000000000000 RSI: 00000000200000c0 RDI:
0000000000000004
[  343.293618] RBP: 00007fdde2bd6e20 R08: 0000000100000001 R09:
0000000000000000
[  343.294557] R10: 0000000100000001 R11: 0000000000000246 R12:
0000000000000000
[  343.295493] R13: 0000000000021000 R14: 0000000000000000 R15:
00007fdde2bd7700
[  343.296432]  </TASK>
[  343.296735] Modules linked in: sch_netem ip6_vti ip_vti ip_gre ipip
sit ip_tunnel geneve macsec macvtap tap ipvlan macvlan 8021q garp mrp
hsr wireguard libchacha20poly1305 chacha_x86_64 poly1305_x86_64
ip6_udp_tunnel udp_tunnel libblake2s blake2s_x86_64 libblake2s_generic
curve25519_x86_64 libcurve25519_generic libchacha xfrm_interface
xfrm6_tunnel tunnel4 veth netdevsim psample batman_adv nlmon dummy team
bonding tls vcan ip6_gre ip6_tunnel tunnel6 gre tun ip6t_rpfilter
ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set
ebtable_nat ebtable_broute ip6table_nat ip6table_mangle
ip6table_security ip6table_raw iptable_nat nf_nat nf_conntrack
nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_security
iptable_raw ebtable_filter ebtables rfkill ip6table_filter ip6_tables
iptable_filter ppdev bochs drm_vram_helper drm_ttm_helper ttm
drm_kms_helper cec parport_pc drm joydev floppy parport sg syscopyarea
sysfillrect sysimgblt i2c_piix4 qemu_fw_cfg fb_sys_fops pcspkr
[  343.297459]  ip_tables xfs virtio_net net_failover failover sd_mod
sr_mod cdrom t10_pi ata_generic pata_acpi ata_piix libata virtio_pci
virtio_pci_legacy_dev serio_raw virtio_pci_modern_dev dm_mirror
dm_region_hash dm_log dm_mod
[  343.311074] Dumping ftrace buffer:
[  343.311532]    (ftrace buffer empty)
[  343.312040] ---[ end trace a2e3db5a6ae05099 ]---
[  343.312691] RIP: 0010:netem_enqueue+0x1590/0x33c0 [sch_netem]
[  343.313481] Code: 89 85 58 ff ff ff e8 5f 5d e9 d3 48 8b b5 48 ff ff
ff 8b 8d 50 ff ff ff 8b 85 58 ff ff ff 48 8b bd 70 ff ff ff 31 d2 2b 4f
74 <f7> f1 48 b8 00 00 00 00 00 fc ff df 49 01 d5 4c 89 e9 48 c1 e9 03
[  343.315893] RSP: 0018:ffff88800bcd7368 EFLAGS: 00010246
[  343.316622] RAX: 00000000ba7c0a9c RBX: 0000000000000001 RCX:
0000000000000000
[  343.317585] RDX: 0000000000000000 RSI: ffff88800f8edb10 RDI:
ffff88800f8eda40
[  343.318549] RBP: ffff88800bcd7458 R08: 0000000000000000 R09:
ffffffff94fb8445
[  343.319503] R10: ffffffff94fb8336 R11: ffffffff94fb8445 R12:
0000000000000000
[  343.320455] R13: ffff88800a5a7000 R14: ffff88800a5b5800 R15:
0000000000000020
[  343.321414] FS:  00007fdde2bd7700(0000) GS:ffff888109780000(0000)
knlGS:0000000000000000
[  343.322489] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  343.323283] CR2: 00000000200000c0 CR3: 000000000ef4c000 CR4:
00000000000006e0
[  343.324264] Kernel panic - not syncing: Fatal exception in interrupt
[  343.333717] Dumping ftrace buffer:
[  343.334175]    (ftrace buffer empty)
[  343.334653] Kernel Offset: 0x13600000 from 0xffffffff81000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  343.336027] Rebooting in 86400 seconds..

Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20211129175328.55339-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: co-maintain random.c

random.c is a bit understaffed, and folks want more prompt reviews. I've
got the crypto background and the interest to do these reviews, and have
authored parts of the file already.

Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"ARM64:

   - Fix constant sign extension affecting TCR_EL2 and preventing
     running on ARMv8.7 models due to spurious bits being set

   - Fix use of helpers using PSTATE early on exit by always sampling it
     as soon as the exit takes place

   - Move pkvm's 32bit handling into a common helper

  RISC-V:

   - Fix incorrect KVM_MAX_VCPUS value

   - Unmap stage2 mapping when deleting/moving a memslot

  x86:

   - Fix and downgrade BUG_ON due to uninitialized cache

   - Many APICv and MOVE_ENC_CONTEXT_FROM fixes

   - Correctly emulate TLB flushes around nested vmentry/vmexit and when
     the nested hypervisor uses VPID

   - Prevent modifications to CPUID after the VM has run

   - Other smaller bugfixes

  Generic:

   - Memslot handling bugfixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
  KVM: fix avic_set_running for preemptable kernels
  KVM: VMX: clear vmx_x86_ops.sync_pir_to_irr if APICv is disabled
  KVM: SEV: accept signals in sev_lock_two_vms
  KVM: SEV: do not take kvm->lock when destroying
  KVM: SEV: Prohibit migration of a VM that has mirrors
  KVM: SEV: Do COPY_ENC_CONTEXT_FROM with both VMs locked
  selftests: sev_migrate_tests: add tests for KVM_CAP_VM_COPY_ENC_CONTEXT_FROM
  KVM: SEV: move mirror status to destination of KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM
  KVM: SEV: initialize regions_list of a mirror VM
  KVM: SEV: cleanup locking for KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM
  KVM: SEV: do not use list_replace_init on an empty list
  KVM: x86: Use a stable condition around all VT-d PI paths
  KVM: x86: check PIR even for vCPUs with disabled APICv
  KVM: VMX: prepare sync_pir_to_irr for running with APICv disabled
  KVM: selftests: page_table_test: fix calculation of guest_test_phys_mem
  KVM: x86/mmu: Handle "default" period when selectively waking kthread
  KVM: MMU: shadow nested paging does not have PKU
  KVM: x86/mmu: Remove spurious TLB flushes in TDP MMU zap collapsible path
  KVM: x86/mmu: Use yield-safe TDP MMU root iter in MMU notifier unmapping
  KVM: X86: Use vcpu->arch.walk_mmu for kvm_mmu_invlpg()
  ...

tools: Fix math.h breakage

Commit 98e1385ef24b ("include/linux/radix-tree.h: replace kernel.h with
the necessary inclusions") broke the radix tree test suite in two
different ways; first by including math.h which didn't exist in the
tools directory, and second by removing an implicit include of
spinlock.h before lockdep.h. Fix both issues.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ALSA: hda/hdmi: fix HDA codec entry table order for ADL-P

Keep the HDA_CODEC_ENTRY entries sorted by the codec VID. ADL-P
is the only misplaced Intel HDMI codec.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211130124732.696896-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda: Add Intel DG2 PCI ID and HDMI codec vid

Add HD Audio PCI ID and HDMI codec vendor ID for Intel DG2.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211130124732.696896-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

KVM: fix avic_set_running for preemptable kernels

avic_set_running() passes the current CPU to avic_vcpu_load(), albeit
via vcpu->cpu rather than smp_processor_id(). If the thread is migrated
while avic_set_running runs, the call to avic_vcpu_load() can use a stale
value for the processor id. Avoid this by blocking preemption over the
entire execution of avic_set_running().

Reported-by: Sean Christopherson <seanjc@google.com>
Fixes: 8221c1370056 ("svm: Manage vcpu load/unload when enable AVIC")
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: VMX: clear vmx_x86_ops.sync_pir_to_irr if APICv is disabled

There is nothing to synchronize if APICv is disabled, since neither
other vCPUs nor assigned devices can set PIR.ON.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

MAINTAINERS: s390/net: add Alexandra and Wenjia as maintainer

Add Alexandra and Wenjia as maintainers for drivers/s390/net and iucv.
Also, remove myself as maintainer for these areas.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dpaa2-eth: destroy workqueue at the end of remove function

The commit c55211892f46 ("dpaa2-eth: support PTP Sync packet one-step
timestamping") forgets to destroy workqueue at the end of remove
function.

Fix this by adding destroy_workqueue before fsl_mc_portal_free and
free_netdev.

Fixes: c55211892f46 ("dpaa2-eth: support PTP Sync packet one-step timestamping")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ice: xsk: clear status_error0 for each allocated desc

Fix a bug in which the receiving of packets can stop in the zero-copy
driver. Ice HW ignores 3 lower bits from QRX_TAIL register, which means
that tail is bumped only on intervals of 8. Currently with XSK RX
batching in place, ice_alloc_rx_bufs_zc() clears the status_error0 only
of the last descriptor that has been allocated/taken from the XSK buffer
pool. status_error0 includes DD bit that is looked upon by the
ice_clean_rx_irq_zc() to tell if a descriptor can be processed.

The bug can be triggered when driver updates the ntu but not the
QRX_TAIL, so HW wouldn't have a chance to write to the ready
descriptors. Later on driver moves the ntc to the mentioned set of
descriptors and interprets them as a ready to be processed, since
corresponding DD bits were not cleared nor any writeback has happened
that would clear it. This can then lead to ntc == ntu case which means
that ring is empty and no further packet processing.

Fix the XSK traffic hang that can be observed when l2fwd scenario from
xdpsock is used by making sure that status_error0 is cleared for each
descriptor that is fed to HW and therefore we are sure that driver will
not processed non-valid DD bits. This will also prevent the driver from
processing the descriptors that were allocated in favor of the
previously processed ones, but writeback didn't happen yet.

Fixes: db804cfc21e9 ("ice: Use the xsk batched rx allocation interface")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: marvell: mvpp2: Fix the computation of shared CPUs

'bitmap_fill()' fills a bitmap one 'long' at a time.
It is likely that an exact number of bits is expected.

Use 'bitmap_set()' instead in order not to set unexpected bits.

Fixes: e531f76757eb ("net: mvpp2: handle cases where more CPUs are available than s/w threads")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

KVM: SEV: accept signals in sev_lock_two_vms

Generally, kvm->lock is not taken for a long time, but
sev_lock_two_vms is different: it takes vCPU locks
inside, so userspace can hold it back just by calling
a vCPU ioctl. Play it safe and use mutex_lock_killable.

Message-Id: <20211123005036.2954379-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: SEV: do not take kvm->lock when destroying

Taking the lock is useless since there are no other references,
and there are already accesses (e.g. to sev->enc_context_owner)
that do not take it. So get rid of it.

Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: SEV: Prohibit migration of a VM that has mirrors

VMs that mirror an encryption context rely on the owner to keep the
ASID allocated. Performing a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM
would cause a dangling ASID:

1. copy context from A to B (gets ref to A)
2. move context from A to L (moves ASID from A to L)
3. close L (releases ASID from L, B still references it)

The right way to do the handoff instead is to create a fresh mirror VM
on the destination first:

1. copy context from A to B (gets ref to A)
[later] 2. close B (releases ref to A)
3. move context from A to L (moves ASID from A to L)
4. copy context from L to M

So, catch the situation by adding a count of how many VMs are
mirroring this one's encryption context.

Fixes: 0b020f5af092 ("KVM: SEV: Add support for SEV-ES intra host migration")
Message-Id: <20211123005036.2954379-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: SEV: Do COPY_ENC_CONTEXT_FROM with both VMs locked

Now that we have a facility to lock two VMs with deadlock
protection, use it for the creation of mirror VMs as well. One of
COPY_ENC_CONTEXT_FROM(dst, src) and COPY_ENC_CONTEXT_FROM(src, dst)
would always fail, so the combination is nonsensical and it is okay to
return -EBUSY if it is attempted.

This sidesteps the question of what happens if a VM is
MOVE_ENC_CONTEXT_FROM'd at the same time as it is
COPY_ENC_CONTEXT_FROM'd: the locking prevents that from
happening.

Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-10-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: sev_migrate_tests: add tests for KVM_CAP_VM_COPY_ENC_CONTEXT_FROM

I am putting the tests in sev_migrate_tests because the failure conditions are
very similar and some of the setup code can be reused, too.

The tests cover both successful creation of a mirror VM, and error
conditions.

Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-9-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: SEV: move mirror status to destination of KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM

Allow intra-host migration of a mirror VM; the destination VM will be
a mirror of the same ASID as the source.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: SEV: initialize regions_list of a mirror VM

This was broken before the introduction of KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM,
but technically harmless because the region list was unused for a mirror
VM. However, it is untidy and it now causes a NULL pointer access when
attempting to move the encryption context of a mirror VM.

Fixes: 54526d1fd593 ("KVM: x86: Support KVM VMs sharing SEV context")
Message-Id: <20211123005036.2954379-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: SEV: cleanup locking for KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM

Encapsulate the handling of the migration_in_progress flag for both VMs in
two functions sev_lock_two_vms and sev_unlock_two_vms. It does not matter
if KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM locks the destination struct kvm a bit
later, and this change 1) keeps the cleanup chain of labels smaller 2)
makes it possible for KVM_CAP_VM_COPY_ENC_CONTEXT_FROM to reuse the logic.

Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: SEV: do not use list_replace_init on an empty list

list_replace_init cannot be used if the source is an empty list,
because "new->next->prev = new" will overwrite "old->next":

new old
prev = new, next = new prev = old, next = old
new->next = old->next prev = new, next = old prev = old, next = old
new->next->prev = new prev = new, next = old prev = old, next = new
new->prev = old->prev prev = old, next = old prev = old, next = old
new->next->prev = new prev = old, next = old prev = new, next = new

The desired outcome instead would be to leave both old and new the same
as they were (two empty circular lists). Use list_cut_before, which
already has the necessary check and is documented to discard the
previous contents of the list that will hold the result.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Use a stable condition around all VT-d PI paths

Currently, checks for whether VT-d PI can be used refer to the current
status of the feature in the current vCPU; or they more or less pick
vCPU 0 in case a specific vCPU is not available.

However, these checks do not attempt to synchronize with changes to
the IRTE. In particular, there is no path that updates the IRTE when
APICv is re-activated on vCPU 0; and there is no path to wakeup a CPU
that has APICv disabled, if the wakeup occurs because of an IRTE
that points to a posted interrupt.

To fix this, always go through the VT-d PI path as long as there are
assigned devices and APICv is available on both the host and the VM side.
Since the relevant condition was copied over three times, take the hint
and factor it into a separate function.

Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Message-Id: <20211123004311.2954158-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: check PIR even for vCPUs with disabled APICv

The IRTE for an assigned device can trigger a POSTED_INTR_VECTOR even
if APICv is disabled on the vCPU that receives it.  In that case, the
interrupt will just cause a vmexit and leave the ON bit set together
with the PIR bit corresponding to the interrupt.

Right now, the interrupt would not be delivered until APICv is re-enabled.
However, fixing this is just a matter of always doing the PIR->IRR
synchronization, even if the vCPU has temporarily disabled APICv.

This is not a problem for performance, or if anything it is an
improvement.  First, in the common case where vcpu->arch.apicv_active is
true, one fewer check has to be performed.  Second, static_call_cond will
elide the function call if APICv is not present or disabled.  Finally,
in the case for AMD hardware we can remove the sync_pir_to_irr callback:
it is only needed for apic_has_interrupt_for_ppr, and that function
already has a fallback for !APICv.

Cc: stable@vger.kernel.org
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Message-Id: <20211123004311.2954158-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: VMX: prepare sync_pir_to_irr for running with APICv disabled

If APICv is disabled for this vCPU, assigned devices may still attempt to
post interrupts.  In that case, we need to cancel the vmentry and deliver
the interrupt with KVM_REQ_EVENT.  Extend the existing code that handles
injection of L1 interrupts into L2 to cover this case as well.

vmx_hwapic_irr_update is only called when APICv is active so it would be
confusing to add a check for vcpu->arch.apicv_active in there.  Instead,
just use vmx_set_rvi directly in vmx_sync_pir_to_irr.

Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123004311.2954158-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: page_table_test: fix calculation of guest_test_phys_mem

A kvm_page_table_test run with its default settings fails on VMX due to
memory region add failure:
> ==== Test Assertion Failure ====
>  lib/kvm_util.c:952: ret == 0
>  pid=10538 tid=10538 errno=17 - File exists
>     1  0x00000000004057d1: vm_userspace_mem_region_add at kvm_util.c:947
>     2  0x0000000000401ee9: pre_init_before_test at kvm_page_table_test.c:302
>     3   (inlined by) run_test at kvm_page_table_test.c:374
>     4  0x0000000000409754: for_each_guest_mode at guest_modes.c:53
>     5  0x0000000000401860: main at kvm_page_table_test.c:500
>     6  0x00007f82ae2d8554: ?? ??:0
>     7  0x0000000000401894: _start at ??:?
>  KVM_SET_USER_MEMORY_REGION IOCTL failed,
>  rc: -1 errno: 17
>  slot: 1 flags: 0x0
>  guest_phys_addr: 0xc0000000 size: 0x40000000

This is because the memory range that this test is trying to add
(0x0c0000000 - 0x100000000) conflicts with LAPIC mapping at 0x0fee00000.

Looking at the code it seems that guest_test_*phys*_mem variable gets
mistakenly overwritten with guest_test_*virt*_mem while trying to adjust
the former for alignment.
With the correct variable adjusted this test runs successfully.

Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <52e487458c3172923549bbcf9dfccfbe6faea60b.1637940473.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86/mmu: Handle "default" period when selectively waking kthread

Account for the '0' being a default, "let KVM choose" period, when
determining whether or not the recovery worker needs to be awakened in
response to userspace reducing the period. Failure to do so results in
the worker not being awakened properly, e.g. when changing the period
from '0' to any small-ish value.

Fixes: 4dfe4f40d845 ("kvm: x86: mmu: Make NX huge page recovery period configurable")
Cc: stable@vger.kernel.org
Cc: Junaid Shahid <junaids@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211120015706.3830341-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: MMU: shadow nested paging does not have PKU

Initialize the mask for PKU permissions as if CR4.PKE=0, avoiding
incorrect interpretations of the nested hypervisor's page tables.

Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86/mmu: Remove spurious TLB flushes in TDP MMU zap collapsible path

Drop the "flush" param and return values to/from the TDP MMU's helper for
zapping collapsible SPTEs. Because the helper runs with mmu_lock held
for read, not write, it uses tdp_mmu_zap_spte_atomic(), and the atomic
zap handles the necessary remote TLB flush.

Similarly, because mmu_lock is dropped and re-acquired between zapping
legacy MMUs and zapping TDP MMUs, kvm_mmu_zap_collapsible_sptes() must
handle remote TLB flushes from the legacy MMU before calling into the TDP
MMU.

Fixes: e2209710ccc5d ("KVM: x86/mmu: Skip rmap operations if rmaps not allocated")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211120045046.3940942-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86/mmu: Use yield-safe TDP MMU root iter in MMU notifier unmapping

Use the yield-safe variant of the TDP MMU iterator when handling an
unmapping event from the MMU notifier, as most occurences of the event
allow yielding.

Fixes: e1eed5847b09 ("KVM: x86/mmu: Allow yielding during MMU notifier unmap/zap, if possible")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211120015008.3780032-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

net: mscc: ocelot: fix missing unlock on error in ocelot_hwstamp_set()

Add the missing mutex_unlock before return from function
ocelot_hwstamp_set() in the ocelot_setup_ptp_traps() error
handling case.

Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211129151652.1165433-1-weiyongjun1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'rxrpc-fixes-20211129' of git://git./linux/kernel/git/dhowells/linux-fs

David Howells says:

====================
rxrpc: Leak fixes

Here are a couple of fixes for leaks in AF_RXRPC:

(1) Fix a leak of rxrpc_peer structs in rxrpc_look_up_bundle().
(2) Fix a leak of rxrpc_local structs in rxrpc_lookup_peer().

* tag 'rxrpc-fixes-20211129' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
rxrpc: Fix rxrpc_local leak in rxrpc_lookup_peer()
rxrpc: Fix rxrpc_peer leak in rxrpc_look_up_bundle()
====================

Link: https://lore.kernel.org/r/163820097905.226370.17234085194655347888.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'wireguard-siphash-patches-for-5-16-rc6'

Jason A. Donenfeld says:

====================
wireguard/siphash patches for 5.16-rc

Here's quite a largeish set of stable patches I've had queued up and
testing for a number of months now:

  - Patch (1) squelches a sparse warning by fixing an annotation.
  - Patches (2), (3), and (5) are minor improvements and fixes to the
    test suite.
  - Patch (4) is part of a tree-wide cleanup to have module-specific
    init and exit functions.
  - Patch (6) fixes a an issue with dangling dst references, by having a
    function to release references immediately rather than deferring,
    and adds an associated test case to prevent this from regressing.
  - Patches (7) and (8) help mitigate somewhat a potential DoS on the
    ingress path due to the use of skb_list's locking hitting contention
    on multiple cores by switching to using a ring buffer and dropping
    packets on contention rather than locking up another core spinning.
  - Patch (9) switches kvzalloc to kvcalloc for better form.
  - Patch (10) fixes alignment traps in siphash with clang-13 (and maybe
    other compilers) on armv6, by switching to using the unaligned
    functions by default instead of the aligned functions by default.
====================

Link: https://lore.kernel.org/r/20211129153929.3457-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

siphash: use _unaligned version by default

On ARM v6 and later, we define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
because the ordinary load/store instructions (ldr, ldrh, ldrb) can
tolerate any misalignment of the memory address. However, load/store
double and load/store multiple instructions (ldrd, ldm) may still only
be used on memory addresses that are 32-bit aligned, and so we have to
use the CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS macro with care, or we
may end up with a severe performance hit due to alignment traps that
require fixups by the kernel. Testing shows that this currently happens
with clang-13 but not gcc-11. In theory, any compiler version can
produce this bug or other problems, as we are dealing with undefined
behavior in C99 even on architectures that support this in hardware,
see also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363.

Fortunately, the get_unaligned() accessors do the right thing: when
building for ARMv6 or later, the compiler will emit unaligned accesses
using the ordinary load/store instructions (but avoid the ones that
require 32-bit alignment). When building for older ARM, those accessors
will emit the appropriate sequence of ldrb/mov/orr instructions. And on
architectures that can truly tolerate any kind of misalignment, the
get_unaligned() accessors resolve to the leXX_to_cpup accessors that
operate on aligned addresses.

Since the compiler will in fact emit ldrd or ldm instructions when
building this code for ARM v6 or later, the solution is to use the
unaligned accessors unconditionally on architectures where this is
known to be fast. The _aligned version of the hash function is
however still needed to get the best performance on architectures
that cannot do any unaligned access in hardware.

This new version avoids the undefined behavior and should produce
the fastest hash on all architectures we support.

Link: https://lore.kernel.org/linux-arm-kernel/20181008211554.5355-4-ard.biesheuvel@linaro.org/
Link: https://lore.kernel.org/linux-crypto/CAK8P3a2KfmmGDbVHULWevB0hv71P2oi2ZCHEAqT=8dQfa0=cqQ@mail.gmail.com/
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: 2c956a60778c ("siphash: add cryptographically secure PRF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

wireguard: ratelimiter: use kvcalloc() instead of kvzalloc()

Use 2-factor argument form kvcalloc() instead of kvzalloc().

Link: https://github.com/KSPP/linux/issues/162
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
[Jason: Gustavo's link above is for KSPP, but this isn't actually a
security fix, as table_size is bounded to 8192 anyway, and gcc realizes
this, so the codegen comes out to be about the same.]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>