Stefano Babic [Fri, 20 Sep 2019 06:51:29 +0000 (08:51 +0200)]
board: imx6dl_mamoj: set the value for CSF size
Default value is too high and it covers the worst case. SPL for
imx6dl_mamoj becomes too big and cannot fit into the OCRAM, but CSF size
can be reduced.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Jagan Teki <jagan@amarulasolutions.com>
CC: Breno Lima <breno.lima@nxp.com>
Otavio Salvador [Mon, 16 Sep 2019 11:14:48 +0000 (08:14 -0300)]
configs: Sync all baseboard specific pico-imx7d
This syncs all baseboard specific defconfig using the
pico-imx7d_defconfig as base. It changes:
- pico-dwarf-imx7d_defconfig
- pico-hobbit-imx7d_defconfig
- pico-nymph-imx7d_defconfig
- pico-pi-imx7d_defconfig
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Joris Offouga [Fri, 30 Aug 2019 12:44:36 +0000 (14:44 +0200)]
configs: pico-imx7d: Convert to DM_VIDEO
This commit convert all pico-imx7d to DM_VIDEO
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Joris Offouga [Fri, 30 Aug 2019 12:42:59 +0000 (14:42 +0200)]
ARM: dts: pico-imx7d: sync device tree with v5.3-rc6
Synchronize device tree with v5.3-rc6 label
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Joris Offouga [Fri, 30 Aug 2019 12:39:49 +0000 (14:39 +0200)]
ARM: dts: pico-imx7d: Add u-boot.dtsi for uboot specific dts change
This commit introduce u-boot.dtsi
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Suggested-by: Peng Fan <peng.fan@nxp.com>
Stefano Babic [Mon, 16 Sep 2019 06:36:23 +0000 (08:36 +0200)]
imx: fix missing MAINTAINERS pico boards
Add missing files pico-nymph-imx7d_defconfig and
c>onfigs/pico-dwarf-imx7d_defconfig
Signed-off-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
CC: Fabio Estevam <festevam@gmail.com>
CC: Otavio Salvador <otavio@ossystems.com.br>
Anatolij Gustschin [Sat, 14 Sep 2019 11:30:49 +0000 (13:30 +0200)]
imx: sksimx6_defconfig: remove SPL misc option to fix build error
Remove CONFIG_SPL_DRIVERS_MISC_SUPPORT since it is already defined
in include/configs/mx6_common.h for SPL builds. When this option
is in defconfig, we get build warnings (or errors when building
with -Werror).
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Fabio Estevam [Sat, 14 Sep 2019 12:14:19 +0000 (09:14 -0300)]
pico: Convert to CONFIG_FSL_USDHC
The eSDHC config symbol has been converted to CONFIG_FSL_USDHC, so
adjust it accordingly in order to fix the build errors:
https://travis-ci.org/sbabic/u-boot-imx/jobs/
584781580#L1287
Reported-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Tue, 11 Dec 2018 02:06:49 +0000 (00:06 -0200)]
logos: Add the TechNexion's logo
Add the TechNexion's logo from their internal U-Boot tree.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Fabio Estevam [Wed, 11 Sep 2019 17:30:28 +0000 (14:30 -0300)]
pico-imx7d: Provide a way to escape the Falcon mode
When CONFIG_SPL_OS_BOOT is selected, it is still convenient to be able
to escape from Falcon mode and boot to U-Boot proper.
Add a mechanism that allows booting in U-Boot proper when the
key 'c' is entered on console at boot time.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Fabio Estevam [Wed, 11 Sep 2019 17:29:52 +0000 (14:29 -0300)]
pico-imx7d: Add instructions for booting in Falcon mode
Improve the README by adding instructions on how to boot using
Falcon mode, which allows the SPL to load the kernel directly,
without using U-Boot proper.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Otavio Salvador [Thu, 11 Apr 2019 12:19:42 +0000 (09:19 -0300)]
pico-imx7d: Add NYMPH baseboard support
This add the boot menu option for the NYMPH baseboard as well as a
specific config file for users which wish to use it as a pre-defined
board.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Otavio Salvador [Thu, 11 Apr 2019 12:17:48 +0000 (09:17 -0300)]
pico-imx7d: Add DWARF baseboard support
This add the boot menu option for the DWARF baseboard as well as a
specific config file for users which wish to use it as a pre-defined
board.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Fabio Berton [Fri, 23 Aug 2019 18:01:00 +0000 (15:01 -0300)]
pico-imx7d: Sync pico-hobbit-imx7d_defconfig
Update pico-hobbit-imx7d_defconfig using pico-imx7d_defconfig as base
to fix device tree file generation. With this all pico-imx7d are
creating u-boot-dtb.img files.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Fabio Estevam [Wed, 11 Sep 2019 17:33:44 +0000 (14:33 -0300)]
pico-imx6ul: Provide a way to escape the Falcon mode
When CONFIG_SPL_OS_BOOT is selected, it is still convenient to be able
to escape from Falcon mode and boot to U-Boot proper.
Add a mechanism that allows booting in U-Boot proper when the
key 'c' is entered on console at boot time.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Fabio Estevam [Wed, 11 Sep 2019 17:32:29 +0000 (14:32 -0300)]
pico-imx6ul: Update the Falcon mode instructions
Sync the Falcon mode instructions with the ones fro pico-imx7d.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Fabio Estevam [Tue, 10 Sep 2019 01:23:39 +0000 (22:23 -0300)]
pico-imx6ul: Add LCD support
Add support for the VXT VL050-8048NT-C01 panel connected through
the 24 bit parallel LCDIF interface.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Fabio Estevam [Thu, 12 Sep 2019 14:15:54 +0000 (11:15 -0300)]
pico-imx6ul: Increase the CONFIG_ENV_OFFSET size
U-Boot binary has grown in such a way that it goes beyond the reserved
area for the environment variables.
Running "saveenv" causes U-Boot to hang because of this overlap.
Fix this problem by increasing the CONFIG_ENV_OFFSET size.
Also, in order to prevent this same problem in the future, use
CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time.
CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare
CONFIG_ENV_OFFSET with its direct value instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Otavio Salvador [Sun, 7 Apr 2019 19:43:02 +0000 (16:43 -0300)]
pico-imx6ul: Add DWARF baseboard support
This add the boot menu option for the DWARF baseboard as well as a
specific config file for users which wish to use it as a pre-defined
board.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Stefano Babic [Fri, 13 Sep 2019 16:53:03 +0000 (18:53 +0200)]
Revert "habv4: tools: Avoid hardcoded CSF size for SPL targets"
This reverts commit
62a52f3f85bf33e286632e99f0d39b2c166af0c4.
Breno Matheus Lima [Thu, 18 Jul 2019 12:34:15 +0000 (12:34 +0000)]
habv4: tools: Avoid hardcoded CSF size for SPL targets
Currently it's not possible to authenticate the U-Boot proper of
mx6ul_14x14_evk_defconfig target:
Authenticate image from DDR location 0x877fffc0...
bad magic magic=0x0 length=0x00 version=0x3
bad length magic=0x0 length=0x00 version=0x3
bad version magic=0x0 length=0x00 version=0x3
spl: ERROR: image authentication fail
Commit
0633e134784a ("imx: hab: Increase CSF_SIZE for i.MX6 and
i.MX7 devices") has increased CSF_SIZE to avoid a possible issue
when booting encrypted boot images.
Commit
d21bd69b6e95 ("tools: mkimage: add firmware-ivt image type
for HAB verification") is hardcoding the CSF and IVT sizes, the
new CSF size is not being considered and u-boot-ivt.img fails to
boot.
Avoid hardcoded CSF and IVT size to fix this issue.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Peng Fan [Mon, 26 Aug 2019 08:12:23 +0000 (08:12 +0000)]
imx8: cpu: fix mac fuse word for i.MX8QM
i.MX8QM does not share same FUSE MAC word index, so update the word
index for i.MX8QM.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 26 Aug 2019 08:12:19 +0000 (08:12 +0000)]
imx8: move i.MX8 cpu desc code to drivers/cpu/imx8_cpu.c
Move cpu desc code to cpu driver directory and name it imx8_cpu.c
No functional change.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 26 Aug 2019 08:12:16 +0000 (08:12 +0000)]
imx: scu_api: add sc_pm_is_partition_started
Add sc_pm_is_partition_started to check whether a partition
has been started. This will be used to detect M4 partition booted up or
not, then we could choose which dtb to use. If M4 is up, we need
use dtb, such as imx8qm-mek-rpmsg.dtb.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 26 Aug 2019 08:12:13 +0000 (08:12 +0000)]
imx8: fdt: add optee node
Add OP-TEE device tree node for Linux according to args passed from ATF.
If ATF has been built with OP-TEE running, boot_pointer[1] will indicate
that.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 26 Aug 2019 08:12:09 +0000 (08:12 +0000)]
imx8: save args passed from ATF
We use information from ATF to know whether OP-TEE is running or not.
So save args passed from ATF.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 26 Aug 2019 08:12:06 +0000 (08:12 +0000)]
imx8: fdt: configure sid for masters
On i.MX8QM, sid is programmable, so we could program sid according the
value encoded in device tree.
This patch support legacy bindings which are still being used by XEN
and new bindings used by Linux Kernel.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 26 Aug 2019 08:12:03 +0000 (08:12 +0000)]
imx: scu_api: add sc_rm_set_master_sid
Add sc_rm_set_master_sid to set stream sid of masters to make
sure they could use smmu.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 26 Aug 2019 08:12:00 +0000 (08:12 +0000)]
configs: imx8qm/qxp_mek: enable CONFIG_OF_SYSTEM_SETUP
Enable CONFIG_OF_SYSTEM_SETUP to let U-Boot could disable
device tree nodes that could not be used by Linux.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 26 Aug 2019 08:11:56 +0000 (08:11 +0000)]
imx8: disable node when the resource is not owned
When resource is not assigned to non-secure Linux, if linux continue
to use the node, linux may crash or hang. So need to set the node
status to disabled for not owned resources.
The resource id is in the power-domains property in device tree,
so parse the power-domains property to get the resource id and
use scfw api to check whether it is owned by current partition.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 26 Aug 2019 08:11:53 +0000 (08:11 +0000)]
imx8qm: correct fdt_file
imx8qm-mek.dtb is the correct fdt file, not fsl-imx8qxp-mek.dtb
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 26 Aug 2019 08:11:49 +0000 (08:11 +0000)]
imx8qm: power up SMMU
There is SMMU in i.MX8QM. To use SMMU in Linux, need power up it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 26 Aug 2019 08:11:46 +0000 (08:11 +0000)]
imx: sys_proto: add is_imx8qm helper
Add is_imx8qm helper which could be used by SoC and Driver code.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Mon, 26 Aug 2019 08:11:42 +0000 (08:11 +0000)]
imx8: Probe the SCU driver by using uclass function
Since SCU MU driver has been bound in dm_init, so we don't need to
bind it again. Just replace by using uclass function to probe it.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Thu, 22 Aug 2019 07:42:49 +0000 (07:42 +0000)]
doc: imx: mkimage: introduce i.MX8 image format
Introduce i.MX8 container set configuration file and add example
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Thu, 22 Aug 2019 07:42:46 +0000 (07:42 +0000)]
imx8qm_mek: switch to use container image
Because FIT could not be used for AHAB secure boot on i.MX8,
so switch to use container image that could let SPL verify
ATF and U-Boot with AHAB.
Enable HUSH_PARSER in defconfig to make run netboot could work.
Note: The AHAB related code has not been added.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Thu, 22 Aug 2019 07:42:43 +0000 (07:42 +0000)]
imx8qxp_mek: switch to use container image
Because FIT could not be used for AHAB secure boot on i.MX8,
so switch to use container image that could let SPL verify
ATF and U-Boot with AHAB.
Note: The AHAB related code has not been added.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Thu, 22 Aug 2019 07:42:41 +0000 (07:42 +0000)]
imx: add container target
To support SPL loading container file, add a new Makefile target,
and introduce a new Kconfig file to source the cfg file which
will be parsed by mkimage.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Thu, 22 Aug 2019 07:42:38 +0000 (07:42 +0000)]
spl: mmc: support loading i.MX container format file
i.MX8 only support AHAB secure boot with Container format image,
we could not use FIT to support secure boot, so introduce container
support to let SPL could load container images.
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Alex Kiernan <alex.kiernan@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Thu, 22 Aug 2019 07:42:33 +0000 (07:42 +0000)]
imx8: support parsing i.MX8 Container file
Add parsing i.MX8 Container file support, this is to let
SPL could load images in a container file to destination address.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Wed, 21 Aug 2019 08:28:15 +0000 (08:28 +0000)]
imx: imx8qxp_mek: fix CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
The first stage of flash.bin is larger than 584 * 512, so when
writting u-boot.itb, some data will be override. Enlarge the
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to fix boot.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Wed, 14 Aug 2019 09:27:06 +0000 (09:27 +0000)]
imx: imx6qdl: dtsi: move U-Boot specific change to u-boot.dtsi
The changes were added by following patch:
commit <
9002e735e717> ("imx: mx6sabresd: fix boot hang with video")
commit <
f45ec8fcfb86> ("imx6: dts: add 'u-boot, dm-pre-reloc' to soc and ipu nodes")
Let's move the U-Boot specific change to imx6qdl-u-boot.dtsi
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Wed, 14 Aug 2019 09:13:04 +0000 (09:13 +0000)]
imx: mx6sabresd: fix usb start when DM enabled
Enable CONFIG_DM_REGULATOR_FIXED to let vbus regulator work.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Breno Matheus Lima [Thu, 18 Jul 2019 12:34:30 +0000 (12:34 +0000)]
imx: configs: Cleanup CONFIG_SECURE_BOOT comments
Since commit
6e1f4d2652e7 ("arm: imx-common: add SECURE_BOOT option
to Kconfig") the SECURE_BOOT option is selected through Kconfig.
Cleanup comments in code to align with this change.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Breno Matheus Lima [Thu, 18 Jul 2019 12:34:23 +0000 (12:34 +0000)]
imx6: spl: Reduce SPL limit size in case CONFIG_SECURE_BOOT is enabled
In case CONFIG_SECURE_BOOT is enabled we need to limit the SPL size to
avoid a possible HAB failure event:
--------- HAB Event 1 -----------------
event data:
0xdb 0x00 0x14 0x42 0x33 0x22 0x33 0x00
0x00 0x00 0x00 0x0f 0x00 0x90 0x70 0x00
0x00 0x01 0x10 0x00
STS = HAB_FAILURE (0x33)
RSN = HAB_INV_ADDRESS (0x22)
CTX = HAB_CTX_TARGET (0x33)
ENG = HAB_ENG_ANY (0x00)
As explained in Commit
23612534fe0f ("spl: imx6: Provide a SPL_SIZE_LIMIT
default") the i.MX6 SPL size limit is 68KB.
The ROM code is copying the image size defined in boot data to its
respective load address, in case we exceed the OCRAM free region a
HAB invalid address failure event is generated.
The maximum CSF size is defined in CONFIG_CSF_SIZE, reduce SPL size
limit based on this configuration.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Breno Matheus Lima [Thu, 18 Jul 2019 12:34:08 +0000 (12:34 +0000)]
Kconfig: Migrate CONFIG_CSF_SIZE to Kconfig
Move CONFIG_CSF_SIZE to Kconfig and define default value as 0x4000.
mx8mqevk requires 0x2000 add this configuration in imx8mq_evk_defconfig
file.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Tue, 23 Jul 2019 15:20:46 +0000 (12:20 -0300)]
mx6sabresd: Reduce overall SPL size
Currently the SPL binary is 67 kB, which leaves only 1 kB of free
internal RAM space.
The following options can be safely removed to save some precious
SPL space:
- CONFIG_SPL_FS_EXT4: u-boot-dtb.img is stored in raw sector via dd
command (at offset 69 kB)
- CONFIG_SPL_I2C_SUPPORT: I2C is not used during SPL
- CONFIG_SPL_OS_BOOT: no need to make Falcon mode supported
by default
After this change the SPL binary size gets down to 51 kB.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Mon, 22 Jul 2019 01:25:10 +0000 (01:25 +0000)]
i.MX7ULP: Change clock rate calculation for NIC1 BUS and EXT
On i.MX7ULP B0, there is change in NIC clock dividers architecture.
On A0, the NIC1 BUS and EXT dividers were in a chain with NIC1 DIV, but
on B0 they are parallel with NIC1 DIV. So now the dividers are independent.
This patch modifies the scg_nic_get_rate function according to this change.
Signed-off-by: Ye Li <ye.li@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Mon, 22 Jul 2019 01:25:08 +0000 (01:25 +0000)]
i.MX7ULP: Set A7 core frequency to 500Mhz for B0 chip
The normal target frequency for ULP A7 core is 500Mhz, but now ROM
set the core frequency to 413Mhz. So change it to 500Mhz in u-boot.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 22 Jul 2019 01:25:05 +0000 (01:25 +0000)]
i.MX7ULP: Add CPU revision check for B0
Since there is no register for CPU revision, we use ROM version to
check the A0 or B0 chip.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Mon, 22 Jul 2019 01:25:03 +0000 (01:25 +0000)]
i.MX7ULP: Workaround APLL PFD2 to 345.6Mhz
The GPU uses APLL PFD2 as its clock parent (483.84Mhz) with divider
set to 1. This frequecy is out of ULP A0 spec. The MAX rate for GPU
is 350Mhz. So we simply configure the APLL PFD2 to 345.6Mhz (FRAC=28)
to workaround the problem. The correct fix should let GPU handle the
clock rate in kernel.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Mon, 22 Jul 2019 01:25:00 +0000 (01:25 +0000)]
i.MX7ULP: Fix SPLL/APLL clock rate calculation issue
The num/denom is a float value, but in the calculation it is convert
to integer 0, and cause the result wrong.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 22 Jul 2019 01:24:57 +0000 (01:24 +0000)]
i.MX7ULP: evk: Enable fuse comamnd
Enable fuse command
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 22 Jul 2019 01:24:55 +0000 (01:24 +0000)]
misc: Kconfig: make i.MX7ULP could use MXC_OCOTP
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Mon, 22 Jul 2019 01:24:53 +0000 (01:24 +0000)]
i.MX7ULP: Fix wrong i2c configuration name
Wrong I2c driver configuration name is used in codes, so I2c driver is
not built. Correct it.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Mon, 22 Jul 2019 01:24:50 +0000 (01:24 +0000)]
i.MX7ULP: Add CONFIG_MX7ULP to kconfig
Since many drivers need this CONFIG_MX7ULP to distiguish the settings
for i.MX7ULP only. Add this entry to cpu's kconfig.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Mon, 22 Jul 2019 01:24:47 +0000 (01:24 +0000)]
i.MX7ULP: Fix PCC register bits mask and offset issue
The offset for FRAC and the mask for PCD are not correct.
If we set FRAC, we can't get the right frequency. Fix them
to correct value.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Bai Ping [Mon, 22 Jul 2019 01:24:45 +0000 (01:24 +0000)]
i.MX7ULP: Correct the clock index
On i.MX7ULP, value zero is reserved in SCG1 RCCR register,
so the val should be decreased by 1 to get the correct clock
source index.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Bai Ping [Mon, 22 Jul 2019 01:24:42 +0000 (01:24 +0000)]
i.MX7ULP: Fix system reset after a7 rtc alarm expired.
The board will reboot if A7 core enter mem mode by rtc, then M4 core
enter VLLS mode after the RTC alarm expired. Enable the dumb PMIC mode
to fix this issue.
Since i.MX7ULP B0 moves the SNVS LP into M4 domain, A core can't access
it. So check the CPU rev and not apply the settings for B0.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 22 Jul 2019 01:24:39 +0000 (01:24 +0000)]
i.MX7ULP: evk: Modify FDT file to disable SD3.0 for usb boot
Since the SD3.0 kernel driver needs M4 image support, this causes
problem for usb boot booting into kernel. To decouple the relationship,
we modify the FDT file in u-boot to disable SD3.0.
So the kernel won't depend on M4 image.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 22 Jul 2019 01:24:37 +0000 (01:24 +0000)]
imx: i.MX7ULP: add get_boot_device
Add get_boot_device for i.MX7ULP
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Troy Kisky [Mon, 29 Jul 2019 19:15:58 +0000 (12:15 -0700)]
configs: nitrogen6x: Add DM_SPI/DM_SPI_FLASH support
Add CONFIG_DM_SPI/CONFIG_DM_SPI_FLASH to all defconfigs whose board is
nitrogen6x.
mx6qsabrelite_defconfig
nitrogen6dl2g_defconfig
nitrogen6dl_defconfig
nitrogen6q2g_defconfig
nitrogen6q_defconfig
nitrogen6s1g_defconfig
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Troy Kisky [Mon, 29 Jul 2019 19:15:57 +0000 (12:15 -0700)]
configs: nitrogen6x: Add DM_GPIO support
Add CONFIG_DM_GPIO to all defconfigs whose board is
nitrogen6x.
mx6qsabrelite_defconfig
nitrogen6dl2g_defconfig
nitrogen6dl_defconfig
nitrogen6q2g_defconfig
nitrogen6q_defconfig
nitrogen6s1g_defconfig
This is in preparation for adding CONFIG_DM_SPI.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Troy Kisky [Mon, 29 Jul 2019 19:15:56 +0000 (12:15 -0700)]
nitrogen6x: reserve used gpios
This prevents messages like
gpio@20a0000: get_value: error: gpio GPIO2_2 not reserved
when CONFIG_DM_GPIO is enabled.
Also, when CONFIG_DM_GPIO is enabled, checkboard is too
early to use gpio_get_value, so read it directly on failure.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Troy Kisky [Mon, 29 Jul 2019 19:15:55 +0000 (12:15 -0700)]
configs: nitrogen6x: Add DM_MMC/DM_USB/AHCI support
Add DM_MMC to all defconfigs whose board is
nitrogen6x.
mx6qsabrelite_defconfig
nitrogen6dl2g_defconfig
nitrogen6dl_defconfig
nitrogen6q2g_defconfig
nitrogen6q_defconfig
nitrogen6s1g_defconfig
This commit is adding multiple configs, but
seems to be the minimum change to not lose features
and still compile fine.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Troy Kisky [Mon, 29 Jul 2019 19:15:54 +0000 (12:15 -0700)]
nitrogen6x: migrate to using device tree
Migrate to using device tree required for further driver model
integration.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Robert Hancock [Thu, 8 Aug 2019 18:14:39 +0000 (12:14 -0600)]
ARM: imx: Support larger SPL size on IMX6DQ
Previously the SPL size on all iMX6 platforms was restricted to 68KB
because the OCRAM size on iMX6SL/DL parts is only 128KB. However, the
other iMX6 variants have 256KB of OCRAM. Add an option
CONFIG_MX6_OCRAM_256KB which allows using the full size on boards which
don't need to support the SL/DL variants. This allows for an SPL size of
196KB, which makes it much easier to use configurations such as SPL with
driver model and FDT control.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Tested-by: Adam Ford <aford173@gmail.com> #imx6q_logic
Ricardo Salveti [Mon, 2 Sep 2019 21:18:52 +0000 (18:18 -0300)]
spl: imx: only use HAB if spl fit signature is not enabled
There is no need to use HAB for FIT signature validation when
SPL_FIT_SIGNATURE is also enabled, as that will be validated via the
normal U-Boot signed FIT image flow.
This allows having SPL validated by HAB and the payloads to follow
being validated with FIT signatures only.
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Ricardo Salveti [Mon, 2 Sep 2019 21:26:15 +0000 (18:26 -0300)]
imx: apalis_imx6: select MX6Q via Kconfig
Toradex Apalis iMX6 modules are available in the iMX6D and iMX6Q
variants, which are quite similar and already managed via only one
dtb in u-boot (imx6-apalis.dtb). Select MX6Q via Kconfig by default in
order to automatically enable the HAS_CAAM and MX6_SMP features.
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Ricardo Salveti [Mon, 2 Sep 2019 21:12:02 +0000 (18:12 -0300)]
apalis_imx6: fix broken fsl_esdhc_imx conversion
Commit
e37ac717d796 ("Convert to use fsl_esdhc_imx for i.MX platforms")
converted FSL_ESDHC to FSL_ESDHC_IMX, but the config check for
apalis_imx6 wasn't updated accordantly.
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Ricardo Salveti [Mon, 2 Sep 2019 21:23:27 +0000 (18:23 -0300)]
apalis_imx6: add board_fit_config_name_match to support FIT in SPL
Only one dtb is currently supported, so match with imx6-apalis.
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Peng Fan [Wed, 24 Jul 2019 08:53:08 +0000 (08:53 +0000)]
arm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to fix gpio command
The gpio command currently uses equal bank names "GPIO0_"
for all existing gpio banks, i. e.:
U-Boot# gpio status -a
Bank GPIO0_:
GPIO0_0: input: 0 [ ]
GPIO0_1: input: 0 [ ]
...
Bank GPIO0_:
GPIO0_0: input: 0 [ ]
GPIO0_1: input: 0 [ ]
...
So the command is broken, it is not possible to address
a desired bank. Add gpio aliases to fix this.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Peng Fan [Wed, 7 Aug 2019 06:40:53 +0000 (06:40 +0000)]
spl: pass args to board_return_to_bootrom
Pass spl_image and bootdev to board_return_bootrom.
i.MX8MN needs the args to let ROM to load images
Cc: Simon Glass <sjg@chromium.org>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Peng Fan [Wed, 7 Aug 2019 06:49:39 +0000 (06:49 +0000)]
serial: Kconfig: make MXC_UART usable for MX7 and IMX8M
i.MX7 and i.MX8M use mxc uart driver, so let's make the SoC could
use MXC_UART kconfig.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Peng Fan [Tue, 6 Aug 2019 10:07:26 +0000 (10:07 +0000)]
tools: imx8mimage: fix HDMI/FIT parsing
Add missed break for HDMI entry.
And moving FIT parsing earlier, because it does not have parameter,
it will not runs into CFG_REG_SIZE.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Peng Fan [Tue, 6 Aug 2019 10:05:48 +0000 (10:05 +0000)]
pinctrl: imx: use devfdt_get_addr_size_index
fdtdec_get_addr_size could not parse addr/size correctly is
using address-cells 2 and size-cells 2 on an ARM32 SoC.
So switch to use devfdt_get_addr_size_index.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Wed, 31 Jul 2019 08:30:02 +0000 (08:30 +0000)]
imx: mx6slevk: enable DM_SPI and DM_SPI_FLASH
With DM_SPI and DM_SPI_FLASH enabled, we could get:
spi 0 [ ] mxc_spi | | | `-- ecspi@
02008000
spi_flash 0 [ ] spi_flash_std | | | `-- m25p80@0
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Thu, 1 Aug 2019 06:02:49 +0000 (06:02 +0000)]
imx: mx6ul_14x14_evk: convert to DM_VIDEO
To support DM_VIDEO,
Add display node for lcdif
Drop board iomuxc settings.
Enable DM_VIDEO
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Peng Fan [Thu, 1 Aug 2019 06:02:41 +0000 (06:02 +0000)]
imx: mx6ul_14x14_evk: Fix SPL boot
When booting SPL on the board, met boot failure:
"
Trying to boot from MMC2
MMC Device 1 not found
spl: could not find mmc device 1. error: -19
SPL: failed to boot from all boot devices
"
Let's register the two mmc controllers in SPL stage to
avoid boot failure.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Peng Fan [Thu, 8 Aug 2019 09:55:57 +0000 (09:55 +0000)]
imx: add i.MX6ULZ board
Add i.MX6ULZ board support. the i.MX6ULZ is SW compatible
with i.MX6ULL. so most code of i.MX6ULL can be reused
by i.MX6ULZ.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Peng Fan [Thu, 8 Aug 2019 09:55:52 +0000 (09:55 +0000)]
imx: add i.MX6ULZ cpu type
Add i.MX6ULZ cpu type and helper.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Peng Fan [Thu, 8 Aug 2019 09:55:47 +0000 (09:55 +0000)]
arm: dts: import dts for i.MX6ULZ
Import kernel dts for i.MX6ULZ from
commit <
0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Peng Fan [Thu, 8 Aug 2019 09:55:37 +0000 (09:55 +0000)]
arm: dts: sync dts for i.MX6ULL
Sync kernel dts for i.MX6ULL from
commit <
0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Peng Fan [Thu, 8 Aug 2019 09:55:33 +0000 (09:55 +0000)]
arm: dts: sync dts for i.MX6UL
Sync kernel dts for i.MX6UL from
commit <
0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Tom Rini [Mon, 7 Oct 2019 21:14:02 +0000 (17:14 -0400)]
Prepare v2019.10
Signed-off-by: Tom Rini <trini@konsulko.com>
Eugeniy Paltsev [Mon, 7 Oct 2019 16:10:50 +0000 (19:10 +0300)]
NET: DW: fix regression for ARC boards
The commit
642b80d256e ("net: designware: drop compatible altr, socfpga-stmmac")
breaks designware ethernet for all ARC boards. It removes
"altr, socfpga-stmmac" compatible from "drivers/net/designware.c"
without changing compatible in the boards which use it.
Fix that by adding "snps,arc-dwmac-3.70a" compatible string to
"drivers/net/designware.c" and using it in ARC boards device tree.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Tom Rini [Sun, 6 Oct 2019 22:02:18 +0000 (18:02 -0400)]
Merge branch '2019-10-06-master-imports'
- Regression work-around on SoCFPGA by disabling WDT in some cases.
- Fix seg fault on 'host info' in some cases.
AKASHI Takahiro [Thu, 22 Aug 2019 07:47:39 +0000 (16:47 +0900)]
cmd: host: fix seg fault at "host info"
With the patch below applied, host_block_dev structure was switched
to be placed in platdata rather than priv. The command "host info"
must be aligned with this change. Otherwise, we will see "Segmentation
Fault."
Fixes:
8f994c860d91 ("sandbox: blk: Switch to use platdata_auto_alloc_size for the driver data")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Maxime Ripard [Thu, 3 Oct 2019 16:32:11 +0000 (18:32 +0200)]
MAINTAINERS: Update my email address
I'm not at bootlin anymore, and my mail address doesn't work any longer.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Simon Goldschmidt [Sat, 5 Oct 2019 20:10:11 +0000 (22:10 +0200)]
arm: socfpga: disable CONFIG_SPL_WDT for gen5 and a10
These boards don't have a watchdog enabled in SPL, so make sure
CONFIG_SPL_WDT is not enabled.
Fixes: commit
6874cb72204f ("watchdog: Split WDT from SPL_WDT")
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Heinrich Schuchardt [Sun, 6 Oct 2019 10:26:16 +0000 (12:26 +0200)]
gitlab-ci: fix typo 'plaforms'
%s/plaforms/platforms/g
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tom Rini [Sun, 6 Oct 2019 00:06:58 +0000 (20:06 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-sh
- ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
Tom Rini [Fri, 4 Oct 2019 16:22:43 +0000 (12:22 -0400)]
Merge branch '2019-10-04-master-imports'
- Assorted TI platform fixes
- Revert the change that broke environment flag validation
- Assorted typo fixes
- Assorted Kconfig dependency fixes
- Other minor bug fixes
Tom Rini [Fri, 4 Oct 2019 16:22:28 +0000 (12:22 -0400)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- dm: core: Correct low cell in ofnode_read_pci_addr()
- dm: core: Correct bad cast in ofnode_get_addr_size_index()
Tom Rini [Fri, 4 Oct 2019 16:21:33 +0000 (12:21 -0400)]
Revert "env: solve compilation error in SPL"
This reverts commit
7d4776545b0f8a8827e5d061206faf61c9ba6ea9. The
changes here break environment validation and furthermore do not seem to
be required.
Signed-off-by: Tom Rini <trini@konsulko.com>
Adam Ford [Wed, 7 Aug 2019 15:16:33 +0000 (10:16 -0500)]
ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPL
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and
usdhc2. This creates the missing imx6q-logicpd-u-boot.dtsi file
which will enable these functions so SPL can properly setup UART, detect
microSD card, and startup.
Fixes:
8f4691e31a18 ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled,
remove MMC init")
Signed-off-by: Adam Ford <aford173@gmail.com>
Ovidiu Panait [Wed, 25 Sep 2019 11:10:54 +0000 (14:10 +0300)]
initcall.h: initcall_run_list(): Improve debug output
Existing debug output is mixed with the function name:
initcall_run_list() initcall: 25263initcall_run_list() (relocated to 425263)
Turn it to:
initcall_run_list() initcall: 25263 (relocated to 425263)
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Andrius Štikonas [Mon, 23 Sep 2019 21:43:41 +0000 (22:43 +0100)]
Kconfig: fix a typo in the description of bmp command.
Signed-off-by: Andrius Štikonas <andrius@stikonas.eu>
Tom Rini [Fri, 20 Sep 2019 21:36:50 +0000 (17:36 -0400)]
Kconfig: Migrate CONFIG_BOOTM_* options
Migrate all of the existing OS support options that are under
CONFIG_BOOTM_* to Kconfig.
Signed-off-by: Tom Rini <trini@konsulko.com>
Roman Stratiienko [Fri, 20 Sep 2019 13:59:18 +0000 (15:59 +0200)]
cmd: part: number: return hexadecimal value
At this point we are using part number sub-command to retrieve UUID
of the partition using it's name.
e.g.:
part number mmc $mmcdev system_a system_a_index
part uuid mmc $mmcdev:${system_a_index} system_a_uuid
Since 'part uuid' sub-command expects partition index in hex format and
'part number' returns decimal value, 'part uuid' command will provide
wrong UUID or fail.
Fixes:
be683756f62034 ("cmd: part: Add 'number' sub-command")
Cc: Dirk Behme <dirk.behme@de.bosch.com>
Reported-by: Pontus Fuchs <pontus.fuchs@se.bosch.com>
Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>