x86/gpu: add JasperLake to gen11 early quirks

Let's reserve JSL stolen memory for graphics.

JasperLake is a gen11 platform which is compatible with
ICL/EHL changes.

This was missed in commit 24ea098b7c0d ("drm/i915/jsl: Split
EHL/JSL platform info and PCI ids")

V2:
    - Added maintainer list in cc
    - Added patch ref in commit message
V1:
    - Added Cc: x86@kernel.org

Fixes: 24ea098b7c0d ("drm/i915/jsl: Split EHL/JSL platform info and PCI ids")
Cc: <stable@vger.kernel.org> # v5.11+
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608053411.394166-1-tejaskumarx.surendrakumar.upadhyay@intel.com

drm/i915/display: Drop FIXME about turn off infoframes

intel_dp_set_infoframes() call in intel_ddi_post_disable_dp() will
take care to disable all enabled infoframes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-4-jose.souza@intel.com

drm/i915/display: Allow fastsets when DP_SDP_VSC infoframe do not match with PSR enabled

When PSR is enabled it handles DP_SDP_VSC, changing revision and all
the other fields as necessary.
It can also enabled and disable this SDP as needed without a full
modeset.

So here masking DP_SDP_VSC bit when previous and future state PSR
enabled, it will still be checked when comparing the asked state
to what was programmed to hardware.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 78b772e1a01f ("drm/i915/display: Fill PSR state during hardware configuration read out")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-2-jose.souza@intel.com

drm/i915/display: Fix fastsets involving PSR

Commit 78b772e1a01f ("drm/i915/display: Fill PSR state during hardware
configuration read out") is not allowing fastsets to happen when PSR
states changes but PSR is a feature that can be enabled and disabled
during fastsets.

So here moving the PSR pipe conf checks to a block that is only
executed when checking if HW state matches with requested state, not
during the phase where it checks if fastset is possible or not.

There still a state mismatch not allowing fastsets between states
turning off or on PSR because of crtc_state->infoframes.enable
BIT(DP_SDP_VSC) but at least for now it will allow a fastset between
PSR1 <-> PSR2, that is a case heavilly used by CI due to pipe CRC not
work with PSR2, but the remaning issue will be fixed in a future patch.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 78b772e1a01f ("drm/i915/display: Fill PSR state during hardware configuration read out")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-1-jose.souza@intel.com

drm/i915/display: remove duplicated argument

Fix the following coccicheck warning:

./drivers/gpu/drm/i915/display/intel_display_power.c:3081:1-28:
 duplicated argument to & or |

This commit fixes duplicate argument. It might be a typo.
But what I can do is to remove it now.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605032209.16111-1-wanjiabing@vivo.com

drm/i915: Add remaining conversions to GRAPHICS_VER

For some reason coccinelle misses a few cases in header files with calls to
INTEL_GEN()/IS_GEN(). Do a manual conversion for those.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-6-lucas.demarchi@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20210606045050.103862-3-lucas.demarchi@intel.com

drm/i915: replace IS_GEN and friends with GRAPHICS_VER

This was done by the following semantic patch:

@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)

@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E

@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E

@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E

@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)

@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)

@@
identifier def.id;
@@
- id
+ ver

It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210606045050.103862-2-lucas.demarchi@intel.com

drm/i915/display: replace IS_GEN() in commented code

Since we are replacing IS_GEN() with GRAPHICS_VER(), make sure we take
care of the comments as well.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603165428.3625495-8-lucas.demarchi@intel.com

drm/i915/gvt: replace IS_GEN and friends with GRAPHICS_VER

This was done by the following semantic patch:

@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)

@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E

@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E

@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E

@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)

@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)

@@
identifier def.id;
@@
- id
+ ver

It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".

Cc: intel-gvt-dev@lists.freedesktop.org
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603165428.3625495-5-lucas.demarchi@intel.com

drm/i915: Initialize the mbus_offset to fix Klockwork issue

Static analysis identified an issue in skl_crtc_allocate_ddb where
mbus_offset may be used uninitialized.
This patch fixes it.

Fixes: 835c176cb1c4 ("drm/i915: Introduce MBUS relative dbuf offsets")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603215338.13804-1-manasi.d.navare@intel.com

drm/i915/adlp: Fix AUX power well -> PHY mapping

On ADL_P the power well->PHY mapping doesn't follow the mapping on previous
platforms, fix this up.

While at it remove the redundant dev_priv param from
icl_tc_phy_aux_ch().

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526143729.2563672-3-imre.deak@intel.com

drm/i915: Fix incorrect assert about pending power domain async-put work

It's possible that an already dequeued put_async_work() will release the
reference (*) that was put asynchronously after the dequeue happened.
This leaves an async-put work pending, without any reference to release.
A subsequent async-put may trigger the

drm_WARN_ON(!queue_delayed_work(&power_domains->async_put_work));

warn due to async_put_work() still pending. To avoid the warn, cancel
the pending async_put_work() when releasing the reference at (*) above.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3421
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2289
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526143729.2563672-2-imre.deak@intel.com

drm/i915/ddi: Flush encoder power domain ref puts during driver unload

An async-put on an encoder specific power domain (for instance the AUX
PW domain) may be pending when removing the encoder. Make sure any such
async-puts are complete while the corresponding encoder is still in place
since at least AUX power wells require this to do a power well->PHY
lookup.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526143729.2563672-1-imre.deak@intel.com

drm/i915/dmc: Move struct intel_dmc to intel_dmc.h

Move struct intel_dmc from i915_drv.h to intel_dmc.h.

v2: Add includes along with moving the struct.

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-4-anusha.srivatsa@intel.com

drm/i915/dmc: Add intel_dmc_has_payload() helper

We check for dmc_payload being there at various points in the driver.
Replace it with the helper.

v2: rebased.
v3: Move intel_dmc to intel_dmc.h in another patch (Lucas)
v4: Remove headers not needed from intel_dmc.h

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-3-anusha.srivatsa@intel.com

drm/i915/dmc: s/DRM_ERROR/drm_err

Use new format of debug messages across intel_csr.

While at it, change some function definitions which now
need dev_priv for drm_err and drm_info etc.

v2: use container_of() (Jani)
v3: Indentation fixes. (Jani)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-2-anusha.srivatsa@intel.com

drm/i915/adl_p: Implement Wa_22012358565

Implement Wa_22012358565 to avoid underrun with 32bpp cursor
in some high bandwidth scenarios. The implementation calls for
overriding the arbitration slots for the planes.

v2: Fix adlp_plane_ctl_arb_slots() return type

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526173600.27708-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/adl_p: Disable FIFO underrun recovery

The FIFO underrun recovery mechanism has a boatload of cases
where it can't be used. The description is also a bit ambiguous
as it doesn't specify whether plane downscaling needs to be considered
or just pipe downscaling. We may not even have sufficient state
tracking to decide this on demand, so for now just disable the
whole thing.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526173600.27708-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/adlp: Add missing TBT AUX -> PW#2 power domain dependencies

On ADL_P the TBT AUX power wells depend on the PW#2 power well, add the
corresponding power domain dependencies.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526203456.2733040-1-imre.deak@intel.com

drm/i915/display: relax 2big checking around initial fb

The kernel prefers enabling fbc over the initial fb, since this leads to
actual runtime power savings, so if the initial fb is deemed too big
using some heuristic, then we simply skip allocating stolen for it.
However if the kernel is not configured with fbcon then it should be
possible to relax this, since unlike with fbcon the display server
shouldn't preserve it when later replacing it, and so we should be able
to re-use the stolen memory for fbc and friends. This patch is reported
to fix some flicker seen during boot splash on some devices.

v2: s/FRAMEBUFFER_CONSOLE/CONFIG_FRAMEBUFFER_CONSOLE

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526124901.245689-1-matthew.auld@intel.com

drm/i915: Drop redundant has_hdmi_sink check

intel_hdmi_bpc_possible() will check has_hdmi_sink for us, so no
need to check it in intel_hdmi_mode_clock_valid() anymore.

Cc: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511160532.21446-7-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Move the TMDS clock division into intel_hdmi_mode_clock_valid()

Now that we have to tell intel_hdmi_mode_clock_valid() whether
we're asking about 4:4:4 or 4:2:0 output it can take care of
the dotclock->TMDS clock conversion.

Cc: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511160532.21446-6-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Check sink deep color capabilitis during HDMI .mode_valid()

Currently HDMI .mode_valid() only checks whether the source can do
deep color. Let's check whether the sink can do it as well.

Cc: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511160532.21446-5-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Move platform checks into intel_hdmi_bpc_possible()

Let's put the platform checks into intel_hdmi_bpc_possible() so that
it'll confirm both the source and sink capabilities.

Cc: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511160532.21446-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Move has_hdmi_sink check into intel_hdmi_bpc_possible()

We wish intel_hdmi_bpc_possible() to consider whether the sink
supports HDMI or just DVI when checking whether it'll support
HDMI deep color or not. This also takes care of the "force DVI"
property.

Cc: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511160532.21446-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Extract intel_hdmi_bpc_possible()

Extract intel_hdmi_bpc_possible() from intel_hdmi_deep_color_possible()
so that we can reuse it for mode validation.

Cc: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511160532.21446-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/display: Remove a redundant function argument from intel_psr_enable_source()

It removes intel_crtc_state from function argument of
intel_psr_enable_source() in order to use intel_psr_enable_source()
without intel_crtc_state on other psr internal functions.
And we can get cpu_trancoder from intel_psr, therefore we don't need to
pass intel_crtc_state to this function.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526000656.3060314-4-matthew.d.roper@intel.com

drm/i915/xelpd: Add VRR guardband for VRR CTL

On XE_LPD, VRR CTL register adds a new VRR Guardband bitfield
replacing the pipeline full and deprecating the pipeline override
bit.

This patch adds this corresponding bitfield in the register defs,
crtc state vrr structure and populates this in vrr compute
config and vrr enable functions. It also adds the corresponding
HW state readout for this field.

Bspec: 50508
Cc: Aditya Swarup <aditya.swarup@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Aditya Swarup <aditya.swarup@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526000656.3060314-3-matthew.d.roper@intel.com

drm/i915/xelpd: Enhanced pipe underrun reporting

XE_LPD brings enhanced underrun recovery:  the hardware can somewhat
mitigate underruns by using an interpolated replacement pixel (soft
underrun) or the previous pixel (hard underrun).  Furthermore, underruns
can now be caused downstream by the port, even if the pipe itself is
operating properly.  The interrupt register and PIPE_STATUS register
give us extra bits to recognize hard/soft underruns and determine
whether the underrun was caused by the port, so we'll use that
information to print some more descriptive errors when underruns occur.

v2:
 - Keep ICL's PIPE_STATUS defined separately from the old GMCH pipe
   status register.  (Ville)
 - Only read/clear the PIPE_STATUS register on platforms with
   display ver >= 11. (Lucas)
v3:
 - Actually enable+unmask all the new underrun interrupts, clear stale
   bits out from PIPE_STATUS before enabling the interrupts, report all
   FIFO underruns errors at once, rename a bunch of stuff to unconfuse
   vs. PIPESTAT. (Ville)

Bspec: 50335
Bspec: 50366
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526000656.3060314-2-matthew.d.roper@intel.com

Merge drm/drm-next into drm-intel-next

Getting in sync with -rc2

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/adl_p: enable MSO on pipe B

On ADL-P, it's possible to enable the stream splitter on pipe B in
addition to pipe A.

Bspec: 50174
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526082903.26395-1-jani.nikula@intel.com

drm/i915: Remove the repeated declaration

Function 'intel_dbuf_init' is declared twice, remove the
repeated declaration.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1621927793-44545-1-git-send-email-zhangshaokun@hisilicon.com

drm/i915/display/adl_p: Disable PSR2

We are missing the implementation of some workarounds to enabled PSR2
in Alderlake P, so to avoid any CI report of issues around PSR2
disabling it until all PSR2 workarounds are implemented.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524214805.259692-5-jose.souza@intel.com

drm/i915/display/adl_p: Allow DC3CO in pipe and port B

DC3CO is allowed in all the combinations between pipe and port A and B
on alderlake-P.

BSpec: 49196
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524214805.259692-4-jose.souza@intel.com

drm/i915: WA for zero memory channel

Commit c457d9cf256e ("drm/i915: Make sure we have enough memory
bandwidth on ICL") assumes that we always have a non-zero
dram_info->channels and uses it as a divisor.
We need num memory channels to be at least 1 for sane bw limits
checking, even when PCode returns 0 or there is a error reading it, so
lets force it to 1 in this case.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524214805.259692-3-jose.souza@intel.com

drm/i915/adl_p: Handle TC cold

On ADL-P TC cold is exited and blocked when legacy aux is powered,
that is exacly the same of what ICL need for static TC ports.

TODO: When a TBT hub or monitor is connected it will cause TBT and
legacy aux to be powered at the same time, hopefully this will not
cause any issues but if it do, some rework will be needed.

v2:
 - skip icl_tc_port_assert_ref_held() warn on, adl-p uses aux to
   block TC cold

v3:
 - Drop icl_tc_port_assert_ref_held() earlier return for adl_p, not
   needed anymore
 - Set timeout_expected when enabling aux power well as port could be
   disconnected when tc_cold_block() is called

BSpec: 55480
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524214805.259692-2-jose.souza@intel.com

drm/i915/display/adl_p: Drop earlier return in tc_has_modular_fia()

MODULAR_FIA_MASK is set in adl_p so we can drop this ealier return
and read registers.
Also to avoid warnings from icl_tc_port_assert_ref_held() when
calling tc_cold_block() in this functions it is necessary to held the
lock.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524214805.259692-1-jose.souza@intel.com

drm/i915/debugfs: Print remap info for DPT VMAs as well

Similarly to GGTT VMAs, DPT VMAs can be also a remapped or rotated view
of the mapped object, so make sure we debug print the details for these
views as well besides the normal view.

While at it also fix the debug print for the VMA type of DPT VMAs.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524172703.2113058-3-imre.deak@intel.com

drm/i915/adlp: Fix GEM VM asserts for DPT VMs

An object mapped via DPT can have remapped and rotated VMA instances
besides the normal VMA instance, similarly to GGTT VMA instances.
Adjust the corresponding VMA lookup asserts.

While at it also check if a DPT VM is passed incorrectly to
i915_vm_to_ppgtt().

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524172703.2113058-2-imre.deak@intel.com

drm/i915/adlp: Require DPT FB CCS color planes to be 2MB aligned

All DPT FB color plane surface base addresses must be 2MB aligned. On
ADL_P this means that the offsets in CCS FB object must be also 2MB
aligned. Adjusting unaligned offsets for these FBs during commit time
(compensating with the x/y offsets) doesn't work, since the big
alignment would most probably lead to an x/y offset mismatch error
between the main and CCS planes.

We can overcome this limitation by remapping CCS FBs, so that each color
plane is at an aligned offset, leaving x/y for each plane unadjusted
during commit and so not causing an x/y mismatch error. However
remapping for CCS FBs will be done as a follow-up, so for now require
that user space allocates the FB obj with properly aligned planes.

v2: s/SZ_2M/512*4k/ for clarity. (Ville)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524172703.2113058-1-imre.deak@intel.com

drm/i915/display: fix typo when returning table

Fix table returned when port_clock > 270000:

drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c:752:47: error: variable 'adlp_dkl_phy_dp_ddi_trans_hbr2_hbr3' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]

Initial version of the patch had it in a single table, but on second
version the table got split, but we continued to reference just one of
them.

Fixes: ca962882268a ("drm/i915/adl_p: Define and use ADL-P specific DP translation tables")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521005209.4058702-1-lucas.demarchi@intel.com

drm/i915/gvt: Add missing macro name changes

Propogate changes to macros name containing CSR_*
to DMC_* from display side.

Fixes: 0633cdcbaa77 ("drm/i915/dmc: Rename macro names containing csr")
Cc: intel-gvt-dev@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521174047.3861-1-anusha.srivatsa@intel.com

drm/i915: Reenable LTTPR non-transparent LT mode for DPCD_REV<1.4

The driver currently disables the LTTPR non-transparent link training
mode for sinks with a DPCD_REV<1.4, based on the following description
of the LTTPR DPCD register range in DP standard 2.0 (at the 0xF0000
register description):

""
LTTPR-related registers at DPCD Addresses F0000h through F02FFh are valid
only for DPCD r1.4 (or higher).
"""

The transparent link training mode should still work fine, however the
implementation for this in some retimer FWs seems to be broken, see the
References: link below.

After discussions with DP standard authors the above "DPCD r1.4" does
not refer to the DPCD revision (stored in the DPCD_REV reg at 0x00000),
rather to the "LTTPR field data structure revision" stored in the
0xF0000 reg. An update request has been filed at vesa.org (see
wg/Link/documentComment/3746) for the upcoming v2.1 specification to
clarify the above description along the following lines:

"""
LTTPR-related registers at DPCD Addresses F0000h through F02FFh are
valid only for LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV 1.4 (or
higher)
"""

Based on my tests Windows uses the non-transparent link training mode
for DPCD_REV==1.2 sinks as well (so presumably for all DPCD_REVs), and
forcing it to use transparent mode on ICL/TGL platforms leads to the
same LT failure as reported at the References: link.

Based on the above let's assume that the transparent link training mode
is not well tested/supported and align the code to the correct
interpretation of what the r1.4 version refers to.

Reported-and-tested-by: Casey Harkins <caseyharkins@gmail.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3415
Fixes: 264613b406eb ("drm/i915: Disable LTTPR support when the DPCD rev < 1.4")
Cc: <stable@vger.kernel.org> # v5.11+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512212809.1234701-1-imre.deak@intel.com

Merge tag 'amd-drm-next-5.14-2021-05-21' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.14-2021-05-21:

amdgpu:
- RAS fixes
- SR-IOV fixes
- More BO management cleanups
- Aldebaran fixes
- Display fixes
- Support for new GPU, Beige Goby
- Backlight fixes

amdkfd:
- RAS fixes
- DMA mapping fixes
- HMM SVM fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521045743.4047-1-alexander.deucher@amd.com

Merge tag 'amd-drm-next-5.14-2021-05-19' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.14-2021-05-19:

amdgpu:
- Aldebaran updates
- More LTTPR display work
- Vangogh updates
- SDMA 5.x GCR fixes
- RAS fixes
- PCIe ASPM support
- Modifier fixes
- Enable TMZ on Renoir
- Buffer object code cleanup
- Display overlay fixes
- Initial support for multiple eDP panels
- Initial SR-IOV support for Aldebaran
- DP link training refactor
- Misc code cleanups and bug fixes
- SMU regression fixes for variable sized arrays
- MAINTAINERS fixes for amdgpu

amdkfd:
- Initial SR-IOV support for Aldebaran
- Topology fixes
- Initial HMM SVM support
- Misc code cleanups and bug fixes

radeon:
- Misc code cleanups and bug fixes
- SMU regression fixes for variable sized arrays
- Flickering fix for Oland with multiple 4K displays

UAPI:
- amdgpu: Drop AMDGPU_GEM_CREATE_SHADOW flag.
  This was always a kernel internal flag and userspace use of it has always been blocked.
  It's no longer needed so remove it.
- amdkgd: HMM SVM support
  Overview: https://patchwork.freedesktop.org/series/85562/
  Porposed userspace: https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/tree/fxkamd/hmm-wip

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210520031258.231896-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-2021-05-19-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Core Changes:

- drm: Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec (Jose).

Driver Changes:

- Display plane clock rates fixes and improvements (Ville).
- Uninint DMC FW loader state during shutdown (Imre).
- Convert snprintf to sysfs_emit (Xuezhi).
- Fix invalid access to ACPI _DSM objects (Takashi).
- A big refactor around how i915 addresses the graphics
  and display IP versions. (Matt, Lucas).
- Backlight fix (Lyude).
- Display watermark and DBUF fixes (Ville).
- HDCP fix (Anshuman).
- Improve cases where display is not available (Jose).
- Defeature PSR2 for RKL and ALD-S (Jose).
- VLV DSI panel power fixes and improvements (Hans).
- display-12 workaround (Jose).
- Fix modesetting (Imre).
- Drop redundant address-of op before lttpr_common_caps array (Imre).
- Fix compiler checks (Jose, Jason).
- GLK display fixes (Ville).
- Fix error code returns (Dan).
- eDP novel: back again to slow and wide link training everywhere (Kai-Heng).
- Abstract DMC FW path (Rodrigo).
- Preparation and changes for upcoming
  XeLPD display IP (Jose, Matt, Ville, Juha-Pekka, Animesh).
- Fix comment typo in DSI code (zuoqilin).
- Simplify CCS and UV plane alignment handling (Imre).
- PSR Fixes on TGL (Gwan-gyeong, Jose).
- Add intel_dp_hdcp.h and rename init (Jani).
- Move crtc and dpll declarations around (Jani).
- Fix pre-skl DP AUX precharge length (Ville).
- Remove stray newlines from random files (Ville).
- crtc->index and intel_crtc+drm_crtc pointer clean-up (Ville).
- Add frontbuffer tracking tracepoints (Ville).
- ADL-S PCI ID updates (Anand).
- Use unique backlight device names (Jani).
- A few clean-ups on i915/audio (Jani).
- Use intel_framebuffer instead of drm one on intel_fb functions (Imre).
- Add the missing MC CCS/XYUV8888 format support on display >= 12 (Imre).
- Nuke display error state (Ville).
- ADL-P initial enablement patches
  starting to land (Clint, Imre, Jose, Umesh, Vandita, Mika).
- Display clean-up around VBT and the strap bits (Lucas).
- Try YCbCr420 color when RGB fails (Werner).
- More PSR fixes and improvements (Jose).
- Other generic display code clean-up (Jose, Ville).
- Use correct downstream caps for check Src-Ctl mode for PCON (Ankit).
- Disable HiZ Raw Stall Optimization on broken gen7 (Simon).

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YKVioeu0JkUAlR7y@intel.com

drm/i915/adl_p: Update memory bandwidth parameters

ADL_P has same memory characteristics as ADL_S platform.

Bspec: 64631

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-18-lucas.demarchi@intel.com

drm/i915/adlp: Add PIPE_MISC2 programming

When scalers are enabled, we need to program underrun
bubble counter to 0x50 to avoid Soft Pipe A underruns.
Make sure other bits dont get overwritten.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-17-lucas.demarchi@intel.com

drm/i915/adl_p: Program DP/HDMI link rate to DDI_BUF_CTL

On ADL_P besides programming the PLL accordingly the DP/HDMI link rate
should be also programmed to the DDI_BUF_CTL register, do that.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-16-lucas.demarchi@intel.com

drm/i915/adl_p: Add PLL Support

The clocks in ALD_P is similar to that of TGL.
The combo PLLs  use the same DPLL0, DPLL1 and TBT_PLL.

This patch adds the helper function intel_mg_pll_enable_reg()
which is similar to intel_combo_pll_enable_reg() for being lookup
place for PLL_ENABLE register in combo phy cases.

Bspec: 55409,55316
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-15-lucas.demarchi@intel.com

drm/i915/adl_p: Define and use ADL-P specific DP translation tables

Define and use DP voltage swing and pre-emphasis translation tables
for ADL-P.

v2:
 - Update according to recent bspec updates; there are now separate
   tables for RBR/HBR and HBR2/HBR3.  (Anusha)

BSpec: 54956
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-14-lucas.demarchi@intel.com

drm/i915/display: Add PSR interrupt error check function

In order to reuse code of PSR interrupt error check on other PSR functions,
it adds psr_interrupt_error_check() function.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-13-lucas.demarchi@intel.com

drm/i915/display: Replace dc3co_enabled with dc3co_exitline on intel_psr struct

It replaces dc3co_enabled with dc3co_exitline on intel_psr struct.  And
it saves dc3co_exitline, not dc3co_enabled, so we can use dc3co_exitline
without intel_crtc_state on other psr internal function like as
intel_psr_enable_source().

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-12-lucas.demarchi@intel.com

drm/i915/adl_p: Tx escape clock with DSI

Today when the DSI controller is paired with the Combo-PHY it
uses the high-speed (HS) Word clock for its low power (LP)
transmit PPI communication to the DPHY. The interface signaling
only changes state at an Escape clock frequency (i.e. its
effectively running on a virtual Tx Escape clock that is controlled
by counters w/in the controller), but all the interface flops are
running off the HS clock.

This has the following drawbacks:

 * It is a deviation from the PPI spec which assumes signaling is
   running on a physical Escape clock
 * The PV timings are over constrained (HS timed to 312.5MHz vs.
   an Escape clock of 20MHz max)

This feature is proposing to change the LP Tx communication between
the controller and the DPHY from a virtual Tx Escape clock to a physical
clock.

To do this we need to program two "M" divisors. One for the usual
DSI_ESC_CLK_DIV and DPHY_ESC_CLK_DIV register and one for MIPIO_DWORD8.

For DSI_ESC_CLK_DIV and DPHY_ESC_CLK_DIV registers the "M" is calculated
as following

Nt = ceil(f_link/160) (theoretical word clock)
Nact = max[3, Nt + (Nt + 1)%2] (actual word clock)
M = Nact * 8

For MIPIO_DWORD8 register, the divisor "M" is calculated as following

M = (Nact - 1)/2

BSpec: 55171

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-11-lucas.demarchi@intel.com

drm/i915/adl_p: MBUS programming

Update MBUS_CTL register if the 2 mbus can be joined as per the current
DDB allocation and active pipes, also update hashing mode and pipe
select bits as  per the sequence mentioned in the bspec.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-10-lucas.demarchi@intel.com

drm/i915: Introduce MBUS relative dbuf offsets

The dbuf slices are going to be split across several MBUS units.
The actual dbuf programming will use offsets relative to the
MBUS unit. To accommodate that we shall store the MBUS relative
offsets into the dbuf_state->ddb[] and crtc_state->plane_ddb*[].

For crtc_state->wm.skl.ddb however we want to stick to global
offsets as we use this to sanity check that the ddb allocations
don't overlap between pipes.

Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-9-lucas.demarchi@intel.com

drm/i915/adl_p: Add ddb allocation support

On adlp the two mbuses have two display pipes and
two DBUFS, Pipe A and D on Mbus1 and Pipe B and C on
Mbus2. The Mbus can be joined and all the DBUFS can be
used on Pipe A or B.

Bspec: 49255
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-8-lucas.demarchi@intel.com

drm/i915/adl_p: Don't config MBUS and DBUF during display initialization

Alderlake-P don't have programing sequences for MBUS or DBUF during
display initializaiton, instead it requires programing to those
registers during modeset because it to depend on the pipes left
enabled.

Bspec: 49213
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-7-lucas.demarchi@intel.com

drm/i915/adl_p: Implement TC sequences

ADL-P have basically the same TC connection and disconnection
sequences as ICL and TGL, the major difference is the new registers.

So here adding functions without the icl prefix in the name and
making the new functions call the platform specific function to access
the correct register.

v2:
 - Retain DDI TC PHY ownership flag during modesetting.

BSpec: 55480
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-6-lucas.demarchi@intel.com

drm/i915/adl_p: Setup ports/phys

The SoC has 6 DDI ports(DDI A,DDI B and DDI TC1-4.
The first two are connected to combo phys while
the rest are connected to TC phys.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-5-lucas.demarchi@intel.com

drm/i915/adl_p: Add dedicated SAGV watermarks

XE_LPD reduces the number of regular watermark latency levels from 8
to 6 on non-dgfx platforms.  However the hardware also adds a special
purpose SAGV wateramrk (and an accompanying transition watermark) that
will be used by the hardware in place of the level 0 values during SAGV
transitions.

Bspec: 49325, 49326, 50419
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-4-lucas.demarchi@intel.com

drm/i915/xelpd: Add rc_qp_table for rcparams calculation

Add the qp table for 444 formats, for 8bpc, 10bpc and 12bpc, as given by
the VESA C model for DSC 1.1

v2:
 - Add include guard to header (Jani)
 - Move the big tables to a .c file (Chris, Jani, Lucas)
v3:
 - Make tables 'static const' and add lookup functions to index into
   them.  (Jani)
v3.1:
 - Include missing .h file.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-3-lucas.demarchi@intel.com

drm/i915/xelpd: Calculate VDSC RC parameters

Add methods to calculate rc parameters for all bpps, against the fixed
arrays that we already have for 8,10,12 valid o/p bpps, to cover RGB 444
formats.  Our hw doesn't support YUV compression yet.  The calculations
used here are from VESA C model for DSC 1.1

v2:
 - Checkpatch fixes

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Juha-Pekka Heikkil <juha-pekka.heikkila@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Mohammed Khajapasha <mohammed.khajapasha@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-2-lucas.demarchi@intel.com

Merge tag 'drm-misc-next-2021-05-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.14:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

 * aperture: Fix unlocking on errors

 * legacy: Fix some doc comments

Driver Changes:

 * drm/amdgpu: Free resource on fence usage query; Fix fence calculation;

 * drm/bridge: Lt9611: Add missing MODULE_DEVICE_TABLE

 * drm/i915: Print formats with %p4cc

 * drm/ingenic: IPU planes are now always of type OVERLAY

 * drm/nouveau: Remove left-over reference to struct drm_device.pdev

 * drm/panfrost: Disable devfreq if num_supplies > 1; Add Mediatek MT8183 +
   DT bindings; Cleanups

 * drm/simpledrm: Print resources with %pr; Fix use-after-free errors;
   Fix NULL deref; Fix MAINTAINERS entry

 * drm/vmwgfx: Fix memory allocation and leak in FIFO allocation; Fix
   return value in PCI resource setup

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YKJs2IfwSYvuGPU7@linux-uq9g.fritz.box

drm/amdgpu: stop touching sched.ready in the backend

This unfortunately comes up in regular intervals and breaks
GPU reset for the engine in question.

The sched.ready flag controls if an engine can't get working
during hw_init, but should never be set to false during hw_fini.

v2: squash in unused variable fix (Alex)

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: fix a potential deadlock in gpu reset

When amdgpu_ib_ring_tests failed, the reset logic called
amdgpu_device_ip_suspend twice, then deadlock occurred.
Deadlock log:

[  805.655192] amdgpu 0000:04:00.0: amdgpu: ib ring test failed (-110).
[  806.290952] [drm] free PSP TMR buffer

[  806.319406] ============================================
[  806.320315] WARNING: possible recursive locking detected
[  806.321225] 5.11.0-custom #1 Tainted: G        W  OEL
[  806.322135] --------------------------------------------
[  806.323043] cat/2593 is trying to acquire lock:
[  806.323825] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu]
[  806.325668]
               but task is already holding lock:
[  806.326664] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu]
[  806.328430]
               other info that might help us debug this:
[  806.329539]  Possible unsafe locking scenario:

[  806.330549]        CPU0
[  806.330983]        ----
[  806.331416]   lock(&adev->dm.dc_lock);
[  806.332086]   lock(&adev->dm.dc_lock);
[  806.332738]
                *** DEADLOCK ***

[  806.333747]  May be due to missing lock nesting notation

[  806.334899] 3 locks held by cat/2593:
[  806.335537]  #0: ffff888100d3f1b8 (&attr->mutex){+.+.}-{3:3}, at: simple_attr_read+0x4e/0x110
[  806.337009]  #1: ffff888136b1fd78 (&adev->reset_sem){++++}-{3:3}, at: amdgpu_device_lock_adev+0x42/0x94 [amdgpu]
[  806.339018]  #2: ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu]
[  806.340869]
               stack backtrace:
[  806.341621] CPU: 6 PID: 2593 Comm: cat Tainted: G        W  OEL    5.11.0-custom #1
[  806.342921] Hardware name: AMD Celadon-CZN/Celadon-CZN, BIOS WLD0C23N_Weekly_20_12_2 12/23/2020
[  806.344413] Call Trace:
[  806.344849]  dump_stack+0x93/0xbd
[  806.345435]  __lock_acquire.cold+0x18a/0x2cf
[  806.346179]  lock_acquire+0xca/0x390
[  806.346807]  ? dm_suspend+0xb8/0x1d0 [amdgpu]
[  806.347813]  __mutex_lock+0x9b/0x930
[  806.348454]  ? dm_suspend+0xb8/0x1d0 [amdgpu]
[  806.349434]  ? amdgpu_device_indirect_rreg+0x58/0x70 [amdgpu]
[  806.350581]  ? _raw_spin_unlock_irqrestore+0x47/0x50
[  806.351437]  ? dm_suspend+0xb8/0x1d0 [amdgpu]
[  806.352437]  ? rcu_read_lock_sched_held+0x4f/0x80
[  806.353252]  ? rcu_read_lock_sched_held+0x4f/0x80
[  806.354064]  mutex_lock_nested+0x1b/0x20
[  806.354747]  ? mutex_lock_nested+0x1b/0x20
[  806.355457]  dm_suspend+0xb8/0x1d0 [amdgpu]
[  806.356427]  ? soc15_common_set_clockgating_state+0x17d/0x19 [amdgpu]
[  806.357736]  amdgpu_device_ip_suspend_phase1+0x78/0xd0 [amdgpu]
[  806.360394]  amdgpu_device_ip_suspend+0x21/0x70 [amdgpu]
[  806.362926]  amdgpu_device_pre_asic_reset+0xb3/0x270 [amdgpu]
[  806.365560]  amdgpu_device_gpu_recover.cold+0x679/0x8eb [amdgpu]

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Christian KÃnig <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: modify system reference clock source for navi+ (V2)

Starting from Navi+, the rlc reference clock is used for system clock
from vbios gfx_info table. It is incorrect to use core_refclk_10khz of
vbios smu_info table as system clock.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update sdma golden setting for Navi12

Current golden setting is out of date.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update gc golden setting for Navi12

Current golden setting is out of date.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix a use-after-free

looks like we forget to set ttm->sg to NULL.
Hit panic below

[ 1235.844104] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b7b4b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 1235.989074] Call Trace:
[ 1235.991751]  sg_free_table+0x17/0x20
[ 1235.995667]  amdgpu_ttm_backend_unbind.cold+0x4d/0xf7 [amdgpu]
[ 1236.002288]  amdgpu_ttm_backend_destroy+0x29/0x130 [amdgpu]
[ 1236.008464]  ttm_tt_destroy+0x1e/0x30 [ttm]
[ 1236.013066]  ttm_bo_cleanup_memtype_use+0x51/0xa0 [ttm]
[ 1236.018783]  ttm_bo_release+0x262/0xa50 [ttm]
[ 1236.023547]  ttm_bo_put+0x82/0xd0 [ttm]
[ 1236.027766]  amdgpu_bo_unref+0x26/0x50 [amdgpu]
[ 1236.032809]  amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x7aa/0xd90 [amdgpu]
[ 1236.040400]  kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu]
[ 1236.046912]  kfd_ioctl+0x463/0x690 [amdgpu]

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: restore the backlight on modeset (v2)

To stay consistent with the user's setting.

v2: rebase on multi-eDP support

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1337
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: add helper functions to get/set backlight (v2)

And cache the value.  These can be used by the backlight callbacks
and modesetting functions.

v2: rebase on latest backlight changes.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1337
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Query correct register for DF hashing on Aldebaran

For Aldebaran, driver needs to query DramMegaBaseAddress to
check if DF hashing is enabled.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add video_codecs query support for aldebaran

Add video_codecs query support for aldebaran.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix a resource leakage issue

The function kfd_lookup_process_by_pasid will increase the reference
count of kfd_process object, its caller should call kfd_unref_process to
decrease the reference count. Otherwise resource leakage will happen.

Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move dmabuf attach/detach to backend_(un)bind

The dmabuf attachment should be updated by moving the SG BO to DOMAIN_CPU
and back to DOMAIN_GTT. This does not necessarily invoke the
populate/unpopulate callbacks. Do this in backend_bind/unbind instead.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add DMA mapping of GTT BOs

Use DMABufs with dynamic attachment to DMA-map GTT BOs on other GPUs.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move kfd_mem_attach outside reservation

This is needed to avoid deadlocks with DMA buf import in the next patch.
Also move PT/PD validation out of kfd_mem_attach, that way the caller
can bo this unconditionally.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: DMA map/unmap when updating GPU mappings

DMA map kfd_mem_attachments in update_gpuvm_pte. This function is called
with the BO and page tables reserved, so we can safely update the DMA
mapping.

DMA unmap when a BO is unmapped from a GPU and before updating mappings
in restore workers.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add multi-GPU DMA mapping helpers

Add BO-type specific helpers functions to DMA-map and unmap
kfd_mem_attachments. Implement this functionality for userptrs by creating
one SG BO per GPU and filling it with a DMA mapping of the pages from the
original mem->bo.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Simplify AQL queue mapping

Do AQL queue double-mapping with a single attach call. That will make it
easier to create per-GPU BOs later, to be shared between the two BO VA
mappings on the same GPU.

Freeing the attachments is not necessary if map_to_gpu fails. These will be
cleaned up when the kdg_mem object is destroyed in
amdgpu_amdkfd_gpuvm_free_memory_of_gpu.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Keep a bo-reference per-attachment

For now they all reference the same BO. For correct DMA mappings they will
refer to different BOs per-GPU.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Rename kfd_bo_va_list to kfd_mem_attachment

This name is more fitting, especially for the changes coming next to
support multi-GPU systems with proper DMA mappings. Cleaned up the code
and renamed some related functions and variables to improve readability.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: fix refcount leak

[Why]
the gem object rfb->base.obj[0] is get according to num_planes
in amdgpufb_create, but is not put according to num_planes

[How]
put rfb->base.obj[0] in amdgpu_fbdev_destroy according to num_planes

Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: psp program IH_RB_CTRL on sienna_cichlid

[Why]
IH_RB_CNTL is blocked by PSP so we need to ask psp to help config it.

[How]
Move psp ip block before ih, and use psp to program IH_RB_CNTL under sriov.

Reviewed-by: Chen, Horace <Horace.Chen@amd.com>
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix typo of format termination newline

/n should be \n

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable idle optimizations for beige goby

[Why&How]
MALL requires idle optimizations to be enabled. This enables MALL
feature on dcn303

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable HDCP for Beige Goby

[Why&How]
Add beige_goby_ta.bin to module firmware table and call psp init for TA

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update DCN303 SR Exit Latency

[Why]
This update was made for DCN30, but it is needed for DCN303 as well

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add callback for update_soc_for_wm_a for dcn303

[Why&How]
Absense of this callback causes null pointer dereference.
Add the corresponding callback in dcn303 resources.

Fixes: 443dfba0248387 ("drm/amd/display: fix dcn3+ bw validation soc param update sequence")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Enable DCN IP init for Beige Goby

[Why&How]
Adds DCN IP block initialization for Beige Goby

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DM support for Beige Goby

[Why&How]

Adds the firmware definition and missing cases statement
hooks for Beige Goby support in AMDGPU DM.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Edit license info for beige goby DC files

[How]
* Add MIT license to all new files as SPDX tag.
* Fix copyright year

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Initial DC support for Beige Goby

[Why&How]
Add Beige Goby (DCN303) resource, irq service, & dmub loader.

v2: fix nbio include (Alex)

Signed-off-by: Chris Park <Chris.Park@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add register definitions for Beige Goby

[Why&How]
Adds registers definitions required for Beige Goby initial support.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix GCR_GENERAL_CNTL offset for beige_goby

beige_goby has similar gc_10_3 ip with sienna_cichlid,
so follow its registers offset setting.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Enable gfxoff for beige_goby

Enable gfxoff in driver side based on SMC#73.3

v2: fix typo 'Eanble' --> 'Enable'

Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Use the PPTable from VBIOS for beige_goby

Switch from softPPTable to VBIOS PPTable.

v2: drop extra parens (Alex)

Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add cgls for beige_goby

Enable cgls to improve the runtime power efficiency.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enabled VCN3.0 CG for BEIGE GOBY

Enable VCN CG for BEIGE GOBY

Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>