ASoC: msm8916-wcd-analog: Use separate outputs for HPH_L/HPH_R

The analog codec has separate output paths for the left headphone channel
(HPH_L) and the right headphone channel (HPH_R). While they are usually
used together for actual headphones output, some devices also have an
analog speaker amplifier connected to one of the headphone channels.

To allow modelling that properly (and to avoid powering on the unneeded
output path), HPH_L and HPH_R should be represented by separate outputs
rather than a shared HEADPHONE output that always activates both paths.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20211214142049.20422-5-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qcom: common: Parse "pin-switches" and "widgets" from DT

Use the DT helpers in the ASoC core to parse the "pin-switches" and
"widgets" properties from the device tree. This allows adding extra
mixers to disable e.g. an extra speaker amplifier that would be
normally powered on automatically because it is connected to a shared
output pin.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20211214142049.20422-4-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: qcom: sm8250: Document "pin-switches" and "widgets"

Some sound card setups might require extra pin switches to allow
turning off certain audio components. There are two real examples for
this in smartphones/tablets based on MSM8916:

  1. Analog speaker amplifiers connected to headphone outputs.

     The MSM8916 analog codec does not have a separate "Line Out" port
     so some devices have an analog speaker amplifier connected to one
     of the headphone outputs. A pin switch is necessary to allow
     playback on headphones without also activating the speaker.

  2. External speaker codec also used as earpiece.

     Some smartphones have two front-facing (stereo) speakers that can
     be also configured to act as an earpiece during voice calls. A pin
     switch is needed to allow disabling the second speaker during
     voice calls.

There are existing bindings that allow setting up such pin switches in
simple-card.yaml. Document the same for Qcom sound cards.

One variant of example 1 above is added to the examples in the DT
schema: There is an analog speaker amplifier connected to the HPH_R
(right headphone channel) output. Adding a "Speaker" pin switch and
widget allows turning off the speaker when audio should be only played
via the connected headphones.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211214142049.20422-3-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: core: Add snd_soc_of_parse_pin_switches() from simple-card-utils

The ASoC core already has several helpers to parse card properties
from the device tree. Move the parsing code for "pin-switches" from
simple-card-utils to a shared snd_soc_of_parse_pin_switches() function
so other drivers can also use it to set up pin switches configured in
the device tree.

Cc: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20211214142049.20422-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: More amlogic sound-name-prefix DT fixes

Merge series from Alexander Stein <alexander.stein@mailbox.org>:

Following up [1] here are more fix for missing sound-name-prefix
properties in the arch/arm64/boot/dts/amlogic/ subtree.

[1] https://www.spinics.net/lists/devicetree/msg466125.html

ASoC: SOF: Re-visit firmware state and panic tracking/handling

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

this series will improve how we are tracking the firmware's state to be able to
avoid communication with it when it is not going to answer due to a panic and
we will attempt to force power cycle the DSP to recover at the next runtime
suspend time.

The state handling brings in other improvements on the way the kernel reports
errors and DSP panics to reduce the printed lines for normal users, but at the
same time allowing developers (or for bug reports) to have more precise
information available to track down the issue.

We can now place messages easily in the correct debug level and not bound to the
static ERROR for some of the print chains, causing excess amount or partial
information to be printed, confusing users and machines (CI).

I would have prefered to split this series up, but it was developed together to
achieve a single goal to reduce the noise, but also provide the details we need
to be able to rootcause issues.

ASoC: codec: tlv320adc3xxx: Fix missing clk_disable_unprepare() on error in adc3xxx_i2c_probe()

Fix the missing clk_disable_unprepare() before return
from adc3xxx_i2c_probe() in the error handling case.

Fixes: e9a3b57efd28 ("ASoC: codec: tlv320adc3xxx: New codec driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211223082212.3342184-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: aiu: spdif-dit: add missing sound-name-prefix property

This is used in meson-gx. Add the property to the binding.
This fixes the dtschema warning:
audio-controller@5400: 'sound-name-prefix' does not match any of the
regexes: 'pinctrl-[0-9]+'

Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Link: https://lore.kernel.org/r/20211223122434.39378-4-alexander.stein@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: spdif-dit: add missing sound-name-prefix property

This is used in meson-axg, meson-g12 and meson-gx. Add the property to
the binding.
This fixes the dtschema warning:
audio-codec-0: 'sound-name-prefix' does not match any of the
regexes: 'pinctrl-[0-9]+'

Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Link: https://lore.kernel.org/r/20211223122434.39378-3-alexander.stein@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: Use DEBUG log level for optional prints

If the user requested to see all dumps (even the optional ones) then use
KERN_DEBUG level for the optional dumps as they are only for debugging
purposes.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-21-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: debug: Use DEBUG log level for optional prints

If the user requested to see all dumps (even the optional ones) then use
KERN_DEBUG level for the optional dumps as they are only for debugging
purposes.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-20-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Add clarifying comments for sof_core_debug and DSP dump flags

Update the comment for the global SOF level debug flags and add one for
the flags used to control the DSP dump functionality.

Document the expected behavior when the SOF_DBG_DUMP_OPTIONAL is passed
for the DSP dump:
Only print the dump if SOF_DBG_PRINT_ALL_DUMPS is set
Print must use KERN_DEBUG log level

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-19-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Rename snd_sof_get_status() and add kernel log level parameter

The snd_sof_get_status() is not the best name for a function which in fact
is tasked to print out DSP oops and stack. Rename it to
sof_print_oops_and_stack().

At the same time add a new parameter to specify the desired kernel log
level to be used for the prints.

When updating the users of the function, pass KERN_ERR for now to make sure
that there is no functional change happens.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-18-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: dsp_arch_ops: add kernel log level parameter for oops and stack

To allow custom log level to be used for the DSP oops and stack print, add
a kernel log level parameter to the two ops.

Modify the xtensa oops and stack functions tom use this new log level
parameter.

Pass KER_ERR from snd_sof_get_status() to make sure that there is no
functional change with this new parameter.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-17-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ops: Always print DSP Panic message but use different message

Never suppress the DSP panic dump as it is always originates from an
assert() or panic() call within the firmware.

Use different message for DSP panics when there will be recovery attempt
going to be done compared to a definitive DSP panic.

Suggested-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-16-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoc: SOF: core: Update the FW boot state transition diagram

Update the state flow diagram to reflect the current implementation.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-15-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: pm: Force DSP off on suspend in BOOT_FAILED state also

Try to force the DSP to be turned off next time if the fw_state is either
CRASHED or BOOT_FAILED when a suspend happens in order to attempt a clean
boot to recover.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-14-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Set SOF_FW_BOOT_FAILED in case we have failure during boot

Change the fw_state to SOF_FW_BOOT_FAILED if we encountered an error during
booting the firmware.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc: Only allow sending of an IPC in SOF_FW_BOOT_COMPLETE state

If the state of the firmware is not BOOT_COMPLETE, it means that the
firmware is not functioning, thus it is not capable of handling IPC
messages.
Do not try to send IPC if the state is not BOOT_COMPLETE

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Rename 'enum snd_sof_fw_state' to 'enum sof_fw_state'

Since there is nothing SND about the firmware state, rename the enum
from `snd_sof_fw_state` to simply `sof_fw_state`

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Link: https://lore.kernel.org/r/20211223113628.18582-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Move the definition of enum snd_sof_fw_state to global header

Move the enum snd_sof_fw_state to include/sound/sof.h to be accessible
outside of the core SOF stack.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Link: https://lore.kernel.org/r/20211223113628.18582-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Introduce new firmware state: SOF_FW_BOOT_READY_OK

The SOF_FW_BOOT_READY_OK fw_state indicates that the boot ready message has
been received and there were no errors found.

The SOF_FW_BOOT_COMPLETE state will be reached after the
snd_sof_dsp_post_fw_run() completes without error.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Link: https://lore.kernel.org/r/20211223113628.18582-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Introduce new firmware state: SOF_FW_CRASHED

The SOF_FW_CRASHED state is meant to indicate the unfortunate case when the
firmware has crashed after a successful boot.

IPC tx timeout is not treated as indication of a firmware crash as it tends
to happen regularly while the firmware is operational.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Link: https://lore.kernel.org/r/20211223113628.18582-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Add a 'message' parameter to snd_sof_dsp_dbg_dump()

When snd_sof_dsp_dbg_dump() is called we have an explanatory message to
give some hint on the reason why we have the dump on the caller level.

Pass this message to snd_sof_dsp_dbg_dump() and handle the print according
to the dump rules.

This way we can finally print information on the HDA boot iteration if all
dumps are enabled.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Add 'non_recoverable' parameter to snd_sof_dsp_panic()

Some platforms use retries during firmware boot to overcome DSP startup
issues.
In these cases we might receive a DSP panic message which should not be
treated as fatal if it happens during boot.

Pass this information to snd_sof_dsp_panic() and omit the panic print if
it is not fatal or the user does not want to see all dumps.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Use sof_debug_check_flag() instead of sof_core_debug directly

The sof_debug_check_flag() is available for checking flags set in
sof_core_debug.

sof_core_debug can be marked static in core.c

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: core: Add simple wrapper to check flags in sof_core_debug

The sof_debug_check_flag() can be used to check a flag or a combination of
them in sof_core_debug.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda-loader: Avoid re-defining the HDA_FW_BOOT_ATTEMPTS

HDA_FW_BOOT_ATTEMPTS is defined in hda.h, do not define it again locally
in hda-loader.c

At the same time correct the indentation for the define in hda.h

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ops: Use dev_warn() if the panic offsets differ

Catch the cases when the stored sdev->dsp_oops_offset and the offset
received via the panic message differs and print a warning, but keep using
the dsp_oops_offset for the oops query.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211223113628.18582-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: ak4375: Change invert controls to a stereo switch

Don't use enums for DACL/DACR Signal Invert controls,
and change them into a stereo "DAC Signal Invert Switch" control.

Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20211222135403.2991657-1-vincent.knecht@mailoo.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: meson: g12a: add missing sound-name-prefix property

This is used in meson-sm1 and meson-g12 .dtsi. Add the property to
the binding.
This fixes the dtschema warning:
audio-controller@740: 'sound-name-prefix' does not match any of the
regexes: 'pinctrl-[0-9]+'

Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211218143423.18768-3-alexander.stein@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: meson: t9015: add missing sound-name-prefix property

This is used in meson-gxl and meson-g12-common .dtsi. Add the property to
the binding.
This fixes the dtschema warning:
audio-controller@32000: 'sound-name-prefix' does not match any of the
regexes: 'pinctrl-[0-9]+'

Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211218143423.18768-2-alexander.stein@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: Use name-prefix schema

name-prefix.txt does not exist anymore, just reference the schema instead.

Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211218143423.18768-1-alexander.stein@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Add AK4375 support

AK4375 is a 32-bit stereo DAC with headphones amplifier.
There's no documentation for it on akm.com, and only a brief
datasheet can be found floating on the internets [1].

Thanks to Oriane BAYERD <obayerd@eurocomposant.fr>
for finally answering my inquiries through akm.com, if only to tell
me that this chip is EOL following AKM factory burning in october 2020
and thus no detailed documentation is available anymore...

AK4331 is advertised [2] as pin and register compatible with AK4375
so some scraps of its datasheet were used and this driver might be
used as a base for it, but this is totally untested.

So this driver is mainly based on downstream code [3] and [4]
by Hu Jin from AKM (no known email).

Tested on msm8916-alcatel-idol347 and msm8939-alcatel-idol3,
which both use PLL driven clock with bypass of SRC (sample rate
converter), so only this setup is supported for now.

[1] https://datasheetspdf.com/pdf-file/1400317/AKM/AK4375A/1
[2] https://www.akm.com/content/dam/documents/products/audio/audio-dac/ak4331ecb/ak4331ecb-en-datasheet.pdf
[3] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/alcatel-idol347/sound/soc/codecs/idol347/ak4375.c
[4] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/alcatel-idol347/sound/soc/codecs/ak4375.c

Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20211220193725.2650356-2-vincent.knecht@mailoo.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: codecs: Add bindings for ak4375

AK4375 is an audio DAC with headphones amplifier controlled via I2C.
Add simple device tree bindings that describe how to set it up.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20211220193725.2650356-1-vincent.knecht@mailoo.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: bcm: Use platform_get_irq() to get the interrupt

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

While at it also drop "r_irq" member from struct bcm_i2s_priv as there
are no users of it.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211221170100.27423-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: xlnx: Use platform_get_irq() to get the interrupt

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211221170100.27423-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: acp: Remove duplicate dependency in Kconfig

Remove duplicate depends on statement in Kconfig file.

Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20211221171912.237792-1-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: fix a use after free bug in open()

This code frees "graph" and then dereferences to save the error code.
Save the error code first and then use gotos to unwind the allocation.

Fixes: 59716aa3f976 ("ASoC: qdsp6: Fix an IS_ERR() vs NULL bug")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211217150007.GB16611@kili
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: AMD: simplify return status handling

cppcheck warning:

sound/soc/sof/amd/acp.c:222:9: warning: Identical condition and return
expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
 return ret;
        ^
sound/soc/sof/amd/acp.c:213:6: note: If condition 'ret' is true, the
function will return/exit
 if (ret)
     ^
sound/soc/sof/amd/acp.c:222:9: note: Returning identical expression 'ret'
 return ret;
        ^

Just return 0; on success.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20211221165802.236843-1-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra-audio-rt5677: Correct example

Remove non-existent properties from the example of the binding. These
properties were borrower from the old txt binding, but they were never
used in practice and aren't documented in the new binding. They aren't
reported by the binding checker because dtschema needs extra patch that
hasn't been upstreamed yet to make unevaluatedProperties work properly.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211216160229.17049-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: acp-config: Update sof_tplg_filename for SOF machines

SOF machines support different codec end points and hence required
different topologies configuration. Update tplg filename in machine
struct to load different topology files for SOF machines.

Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211221161814.236318-3-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: amd: acp-config: Enable SOF audio for Google chrome boards.

We need to support sof audio on different variants of Google boards.
Add new entry in dmi table to enable SOF flag on Google chrome boards.
Also add newer machines to sof_machines list with codecs and amps acpi
id check to register sof sound cards on different variants.

Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Link: https://lore.kernel.org/r/20211221161814.236318-2-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Use dev_err_probe() helper

Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

This patch-set tries to use dev_err_probe() helper function
instead of manual dev_err() code.
I hope ASoC will be more clean code by this patch-set.

ASoC: mediatek: mt8195-mt6359: reduce log verbosity in probe()

Eliminates error messages if snd_soc_register_card() failed.  Kernel
emits messages if device probe error anyway.

This is mainly for removing the following error messages during boot.
    >>> snd_soc_register_card fail -517

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20211220093408.207206-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codec: tlv320adc3xxx: New codec driver

New codec driver for Texas Instruments TLV320ADC3001 and
TLV320ADC3101 audio ADCs.

Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2112151801370.27889@lap5cg0092dnk.se.axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tlv320adc3xxx: New codec bindings

DT bindings for Texas Instruments TLV320ADC3001 and TLV320ADC3101
audio ADCs.

Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2112151759170.27889@lap5cg0092dnk.se.axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sunxi: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-23-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: stm: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-22-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: samsung: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-21-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rockchip: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-20-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qcom: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-19-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mxs: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-18-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: meson: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-17-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: img: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-16-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: generic: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-15-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-14-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ti: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-13-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ateml: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-12-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: tlv320aic31xx: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-11-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: ssm2305: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-10-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: simple-mux: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-9-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: simple-amplifier: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-8-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: sgtl5000: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-7-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: pcm3168a: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-6-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: max9860: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-5-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: max9759: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-4-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: es7241: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-3-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: ak4118: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-2-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: catpt: Dma-transfer fix and couple

Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:

Set is made of one fix for dma-transfer so that result of
dmaengine_submit() is tested before moving on, and few cleanups:

- two non-impactful, where catpt_component_open() layout gets improved
  slightly as well as relocation of couple of locals found in
  PCM-functions so that they look more cohesive
- no need to expose catpt-driver board-matching information globally.
  Most fields are not by it and it's the sole user of haswell_machines
  table. By having them locally it is clear what is actually being used

Cezary Rojewski (5):
  ASoC: Intel: catpt: Test dmaengine_submit() result before moving on
  ASoC: Intel: catpt: Reduce size of catpt_component_open()
  ASoC: Intel: catpt: Streamline locals declaration for PCM-functions
  ASoC: Intel: catpt: Drop SND_SOC_ACPI_INTEL_MATCH dependency
  ASoC: Intel: Drop legacy HSW/BDW board-match information

 include/sound/soc-acpi-intel-match.h          |  1 -
 sound/soc/intel/Kconfig                       |  2 +-
 sound/soc/intel/catpt/device.c                | 33 +++++++++++++++--
 sound/soc/intel/catpt/dsp.c                   | 14 ++++++-
 sound/soc/intel/catpt/pcm.c                   | 37 +++++++++----------
 .../common/soc-acpi-intel-hsw-bdw-match.c     | 16 --------
 6 files changed, 61 insertions(+), 42 deletions(-)

--
2.25.1

Support HDMI audio on NVIDIA Tegra20

Merge series from Dmitry Osipenko <digetx@gmail.com>:

This series revives Tegra20 S/PDIF driver which was upstreamed long time
ago, but never was used. It also turns Tegra DRM HDMI driver into HDMI
audio CODEC provider. Finally, HDMI audio is enabled in device-trees.
For now the audio is enable only for Acer A500 tablet and Toshiba AC100
netbook because they're already supported by upstream, later on ASUS TF101
tablet will join them.

I based S/PDIF patches on Arnd's Bergmann patch from a separate series [1]
that removes obsolete slave_id. This eases merging of the patches by
removing the merge conflict. This is a note for Mark Brown.

I also based this series on top of power management series [2]. I.e. [2]
should be applied first, otherwise "Add S/PDIF node to Tegra20 device-tree"
patch should have merge conflict. This is a note for Thierry.

[1] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=273312
[2] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=274534

Changelog:

v4: - Added patches that update multi_v7_defconfig with the enabled S/PDIF
      and APB DMA drivers.

v3: - Renamed S/PDIF device-tree clocks as was suggested by Rob Herring.

    - Added r-bs and acks that were given by Rob Herring to v2.

v2: - Corrected I2S yaml problem that was reported by the DT bot for v1
      by removing the non-existent required clock-names property.

    - Removed assigned-clocks property from S/PDIF yaml since this property
      is now inherited from the clocks property.

    - Reordered the "tegra20: spdif: Set FIFO trigger level" patch, making
      it the first sound/soc patch in the series, like it was suggested by
      Mark Brown in the comment to v1. Also reworded commit message of this
      patch to *not* make it looks like it should be backported to stable
      kernels.

Arnd Bergmann (1):
  ASoC: tegra20-spdif: stop setting slave_id

Dmitry Osipenko (21):
  ASoC: dt-bindings: Add binding for Tegra20 S/PDIF
  ASoC: dt-bindings: tegra20-i2s: Convert to schema
  ASoC: dt-bindings: tegra20-i2s: Document new nvidia,fixed-parent-rate
    property
  dt-bindings: host1x: Document optional HDMI sound-dai-cells
  ASoC: tegra20: spdif: Set FIFO trigger level
  ASoC: tegra20: spdif: Support device-tree
  ASoC: tegra20: spdif: Improve driver's code
  ASoC: tegra20: spdif: Use more resource-managed helpers
  ASoC: tegra20: spdif: Reset hardware
  ASoC: tegra20: spdif: Support system suspend
  ASoC: tegra20: spdif: Filter out unsupported rates
  ASoC: tegra20: i2s: Filter out unsupported rates
  drm/tegra: hdmi: Unwind tegra_hdmi_init() errors
  drm/tegra: hdmi: Register audio CODEC on Tegra20
  ARM: tegra_defconfig: Enable S/PDIF driver
  ARM: config: multi v7: Enable NVIDIA Tegra20 S/PDIF driver
  ARM: config: multi v7: Enable NVIDIA Tegra20 APB DMA driver
  ARM: tegra: Add S/PDIF node to Tegra20 device-tree
  ARM: tegra: Add HDMI audio graph to Tegra20 device-tree
  ARM: tegra: acer-a500: Enable S/PDIF and HDMI audio
  ARM: tegra: paz00: Enable S/PDIF and HDMI audio

 .../display/tegra/nvidia,tegra20-host1x.txt   |   1 +
 .../bindings/sound/nvidia,tegra20-i2s.txt     |  30 ---
 .../bindings/sound/nvidia,tegra20-i2s.yaml    |  77 +++++++
 .../bindings/sound/nvidia,tegra20-spdif.yaml  |  85 ++++++++
 .../boot/dts/tegra20-acer-a500-picasso.dts    |   8 +
 arch/arm/boot/dts/tegra20-paz00.dts           |   8 +
 arch/arm/boot/dts/tegra20.dtsi                |  40 +++-
 arch/arm/configs/multi_v7_defconfig           |   2 +
 arch/arm/configs/tegra_defconfig              |   1 +
 drivers/gpu/drm/tegra/Kconfig                 |   3 +
 drivers/gpu/drm/tegra/hdmi.c                  | 168 +++++++++++++--
 sound/soc/tegra/tegra20_i2s.c                 |  49 +++++
 sound/soc/tegra/tegra20_spdif.c               | 197 ++++++++++++------
 sound/soc/tegra/tegra20_spdif.h               |   1 +
 sound/soc/tegra/tegra_pcm.c                   |   6 +
 sound/soc/tegra/tegra_pcm.h                   |   1 +
 16 files changed, 574 insertions(+), 103 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml

--
2.33.1

ASoC: SOF: couple of cleanups

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Guennadi spotted inconsistencies with our 'const' handling, Ajit Kumar
flagged a missing check for a null pointer and we missed the
definition of debug zones.

ASoC: SOF: remove suport for TRIGGER_RESUME

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

None of the SOF platforms support INFO_RESUME, and rely on the
indirect path used by the ALSA core with the prepare and TRIGGER_START
steps.

Let's remove the left-over dead code.

ASoC: sh: rz-ssi: Check return value of pm_runtime_resume_and_get()

The return value of pm_runtime_resume_and_get() needs to be checked to
avoid a usage count imbalance in the error case. This fix is basically
the same as 92c959bae2e5 ("reset: renesas: Fix Runtime PM usage"),
and the last step before pm_runtime_resume_and_get() can be annotated
as __must_check.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/9fed506d-b780-55cd-45a4-9bd2407c910f@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: catpt: Streamline locals declaration for PCM-functions

Group all the catpt_xxx structs together in PCM related functions so
they look more cohesive.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211216115743.2130622-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: catpt: Reduce size of catpt_component_open()

With some improved if-logy, function's size can be reduced slightly.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211216115743.2130622-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: catpt: Test dmaengine_submit() result before moving on

After calling dmaengine_submit(), the submitted transfer descriptor
belongs to the DMA engine. Pointer to that descriptor may no longer be
valid after the call and should be tested before awaiting transfer
completion.

Reported-by: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 4fac9b31d0b9 ("ASoC: Intel: Add catpt base members")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211216115743.2130622-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra20: i2s: Filter out unsupported rates

Support new nvidia,fixed-parent-rate device-tree property which instructs
I2S that board wants parent clock rate to stay at a fixed rate. This allows
to play audio over S/PDIF and I2S simultaneously. The root of the problem
is that audio components on Tegra share the same audio PLL, and thus, only
a subset of rates can be supported if we want to play audio simultaneously.
Filter out audio rates that don't match parent clock rate if device-tree
has the nvidia,fixed-parent-rate property.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-14-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra20: spdif: Filter out unsupported rates

SPDIF and other SoC components share audio PLL on Tegra, thus only one
component may set the desired base clock rate. This creates problem for
HDMI audio because it uses SPDIF and audio may not work if SPDIF's clock
doesn't exactly match standard audio rate since some receivers may reject
audio in that case. Filter out audio rates which SPDIF output can't
support, assuming that other components won't change rate at runtime.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-13-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra20: spdif: Support system suspend

Support system suspend by enforcing runtime PM suspend/resume.
Now there is no doubt that h/w is indeed stopped during suspend
and that h/w state will be properly restored after resume.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-12-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra20: spdif: Reset hardware

Reset S/PDIF controller on runtime PM suspend/resume to ensure that we
always have a consistent hardware state.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-11-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra20: spdif: Use more resource-managed helpers

Use resource-managed helpers to make code cleaner. Driver's remove callback
isn't needed anymore since driver is completely resource-managed now.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-10-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra20: spdif: Improve driver's code

- Clean up whitespaces, defines and variables.

- Remove obsolete code.

- Adhere to upstream coding style.

- Don't override returned error code.

- Replace pr_err with dev_err.

No functional changes are made by this patch. This is a minor code's
refactoring that will ease further maintenance of the driver.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-9-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra20: spdif: Support device-tree

Tegra20 S/PDIF driver was added in a pre-DT era and was never used since
that time. Revive driver by adding device-tree support.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-8-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra20: spdif: Set FIFO trigger level

FIFO trigger level must be not less than the size of DMA burst, otherwise
audio will be played x4 faster that it should be because part of the DMA
data will be dropped on FIFO input buffer overflow.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-6-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: tegra20-i2s: Document new nvidia,fixed-parent-rate property

Document new nvidia,fixed-parent-rate property which instructs that this
board wants parent clock to stay at a fixed rate. It allows to prevent
conflicts between audio components that share same parent PLL. For
instance, this property allows to have HDMI audio, speaker and headphones
in the system playing audio simultaneously, which is a common pattern for
consumer devices.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211204143725.31646-4-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: tegra20-i2s: Convert to schema

Convert NVIDIA Tegra20 I2S binding to schema.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-3-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: Add binding for Tegra20 S/PDIF

Add device-tree binding for Tegra20 S/PDIF controller.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-2-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'dmaengine_topic_slave_id_removal_5.17' of git://git./linux/kernel/git/vkoul/dmaengine into v4_20211204_digetx_support_hdmi_audio_on_nvidia_tegra20

dmaengine_topic_slave_id_removal_5.17

Tag for dmaengine slave_id removal topic branch which should be merged
into v5.17

ASoC: SOF: Kconfig: Make the SOF_DEVELOPER_SUPPORT depend on SND_SOC_SOF

SND_SOC_SOF_DEVELOPER_SUPPORT contains options affecting how the built
SOF driver stack will behave, enables debug options and other features.

These options have no meaning if the SND_SOC_SOF is not even enabled.

If we have SOF client options under developer_support and debug they can
be selected to be built even without the core, but they do need symbols
from the core (the sof-client API) which can result build failure.

In Kconfig we can have
SND_SOC_SOF_TOPLEVEL=y
SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST=y

for example, which will make the flood client to be built, but the SOF core
is not as SND_SOC_SOF is not selected.

Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211216230350.343857-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: audio-graph-port: enable both flag/phandle for bitclock/frame-master

snd_soc_daifmt_parse_clock_provider_raw() is handling both
bitclock/frame-master, and is supporting both flag/phandle.
Current DT is assuming it is flag style.
This patch allows both case.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211216000018.2641925-1-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ipc: debug: Add shared memory heap to memory scan

Newly added shared heap zones should be taken into account during
memory usage scanning.

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211216232422.345164-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc: Add null pointer check for substream->runtime

When pcm stream is stopped "substream->runtime" pointer will be set
to NULL by ALSA core. In case host received an ipc msg from firmware
of type IPC_STREAM_POSITION after pcm stream is stopped, there will
be kernel NULL pointer exception in ipc_period_elapsed(). This patch
fixes it by adding NULL pointer check for "substream->runtime".

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211216232422.345164-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: avoid casting "const" attribute away

Casting "const" attribute away is dangerous, obtain a writable
pointer instead to avoid that.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211216232422.345164-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: remove support for RESUME in platform trigger

The SOF driver removed the support for INFO_RESUME in the commit
"ASoC: SOF: pcm: do not add SNDRV_PCM_INFO_RESUME to runtime hw info".
And resuming is handled by the ALSA core with the .prepare and
.trigger_start stages. So, remove handling of RESUME trigger in the
component driver trigger op. So, remove handling the RESUME trigger in
the platform trigger op for HDA platforms.

Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211216231628.344687-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: remove support for RESUME trigger

The SOF driver removed the support for INFO_RESUME in the commit
"ASoC: SOF: pcm: do not add SNDRV_PCM_INFO_RESUME to runtime hw info".
And resuming is handled by the ALSA core with the .prepare and
.trigger_start stages. So, remove handling of RESUME trigger in the
HDA DAI BE trigger op.

Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211216231628.344687-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: pcm: remove support for RESUME trigger

The SOF driver removed the support for INFO_RESUME in the commit
"ASoC: SOF: pcm: do not add SNDRV_PCM_INFO_RESUME to runtime hw info".
And resuming is handled by the ALSA core with the .prepare and
.trigger_start stages. So, remove handling of RESUME trigger in the
component driver trigger op.

Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211216231628.344687-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

dmaengine: remove slave_id config field

All references to the slave_id field have been removed, so remove the
field as well to prevent new references from creeping in again.

Originally this allowed slave DMA drivers to configure which device
is accessed with the dmaengine_slave_config() call, but this was
inconsistent, as the same information is also passed while requesting
a channel, and never changes in practice.

In modern kernels, the device is always selected when requesting
the channel, so the .slave_id field is no longer useful.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-12-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: xilinx_dpdma: stop using slave_id field

The display driver wants to pass a custom flag to the DMA engine driver,
which it started doing by using the slave_id field that was traditionally
used for a different purpose.

As there is no longer a correct use for the slave_id field, it should
really be removed, and the remaining users changed over to something
different.

The new mechanism for passing nonstandard settings is using the
.peripheral_config field, so use that to pass a newly defined structure
here, making it clear that this will not work in portable drivers.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-10-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: qcom-adm: stop abusing slave_id config

The slave_id was previously used to pick one DMA slave instead of another,
but this is now done through the DMA descriptors in device tree.

For the qcom_adm driver, the configuration is documented in the DT
binding to contain a tuple of device identifier and a "crci" field,
but the implementation ends up using only a single cell for identifying
the slave, with the crci getting passed in nonstandard properties of
the device, and passed through the dma driver using the old slave_id
field. Part of the problem apparently is that the nand driver ends up
using only a single DMA request ID, but requires distinct values for
"crci" depending on the type of transfer.

Change both the dmaengine driver and the two slave drivers to allow
the documented binding to work in addition to the ad-hoc passing
of crci values. In order to no longer abuse the slave_id field, pass
the data using the "peripheral_config" mechanism instead.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-9-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>