ARM: dts: omap: fix gpmc,mux-add-data type

[ Upstream commit 51b9e22ffd3c4c56cbb7caae9750f70e55ffa603 ]

gpmc,mux-add-data is not boolean.

Fixes the below errors flagged by dtbs_check.

"ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'"

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Add support for the Pioneer DJM 750MK2 Mixer/Soundcard

[ Upstream commit 6d27788160362a7ee6c0d317636fe4b1ddbe59a7 ]

The kernel already has support for very similar Pioneer djm products
and this work is based on that.

Added device to quirks-table.h and added control info to
mixer_quirks.c.

Tested on my hardware and all working.

Signed-off-by: William Overton <willovertonuk@gmail.com>
Link: https://lore.kernel.org/r/20211010145841.11907-1-willovertonuk@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: multitouch: disable sticky fingers for UPERFECT Y

[ Upstream commit 08b9a61a87bc339a73c584d8924c86ab36d204a7 ]

When a finger is on the screen, the UPERFECT Y portable touchscreen
monitor reports a contact in the first place. However, after this
initial report, contacts are not reported at the refresh rate of the
screen as required by the Windows 8 specs.

This behaviour triggers the release_timer, removing the fingers even
though they are still present.

To avoid it, add a new class, similar to MT_CLS_WIN_8 but without the
MT_QUIRK_STICKY_FINGERS quirk for this device.

Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware_loader: fix pre-allocated buf built-in firmware use

[ Upstream commit f7a07f7b96033df7709042ff38e998720a3f7119 ]

The firmware_loader can be used with a pre-allocated buffer
through the use of the API calls:

  o request_firmware_into_buf()
  o request_partial_firmware_into_buf()

If the firmware was built-in and present, our current check
for if the built-in firmware fits into the pre-allocated buffer
does not return any errors, and we proceed to tell the caller
that everything worked fine. It's a lie and no firmware would
end up being copied into the pre-allocated buffer. So if the
caller trust the result it may end up writing a bunch of 0's
to a device!

Fix this by making the function that checks for the pre-allocated
buffer return non-void. Since the typical use case is when no
pre-allocated buffer is provided make this return successfully
for that case. If the built-in firmware does *not* fit into the
pre-allocated buffer size return a failure as we should have
been doing before.

I'm not aware of users of the built-in firmware using the API
calls with a pre-allocated buffer, as such I doubt this fixes
any real life issue. But you never know... perhaps some oddball
private tree might use it.

In so far as upstream is concerned this just fixes our code for
correctness.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210917182226.3532898-2-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof_sdw: add missing quirk for Dell SKU 0A45

[ Upstream commit 64ba6d2ce72ffde70dc5a1794917bf1573203716 ]

This device is based on SDCA codecs but with a single amplifier
instead of two.

BugLink: https://github.com/thesofproject/linux/issues/3161
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20211004213512.220836-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: soc-acpi: add missing quirk for TGL SDCA single amp

[ Upstream commit f2470679b070a77ea22f8b791fae7084c2340c7d ]

We don't have a configuration for a single amp on link1.

BugLink: https://github.com/thesofproject/linux/issues/3161
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20211004213512.220836-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec

[ Upstream commit 9d36ceab94151f07cf3fcb067213ac87937adf12 ]

These devices are based on an I2C/I2S device, we need to force the use
of the SOF driver otherwise the legacy HDaudio driver will be loaded -
only HDMI will be supported.

Co-developed-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211004213512.220836-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY

[ Upstream commit 315e7b884190a6c9c28e95ad3b724dde9e922b99 ]

According to the datasheet the VSC8531 PHY expects a reset pulse of 100 ns
and a delay of 15 ms after the reset has been deasserted. Set the matching
values in the devicetree.

Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: smartpqi: Add controller handshake during kdump

[ Upstream commit 9ee5d6e9ac52a3c8625697535f8e35864d9fd38c ]

Correct kdump hangs when controller is locked up.

There are occasions when a controller reboot (controller soft reset) is
issued when a controller firmware crash dump is in progress.

This leads to incomplete controller firmware crash dump:

 - When the controller crash dump is in progress, and a kdump is initiated,
   the driver issues inbound doorbell reset to bring back the controller in
   SIS mode.

 - If the controller is in locked up state, the inbound doorbell reset does
   not work causing controller initialization failures. This results in the
   driver hanging waiting for SIS mode.

To avoid an incomplete controller crash dump, add in a controller crash
dump handshake:

 - Controller will indicate start and end of the controller crash dump by
   setting some register bits.

 - Driver will look these bits when a kdump is initiated.  If a controller
   crash dump is in progress, the driver will wait for the controller crash
   dump to complete before issuing the controller soft reset then complete
   driver initialization.

Link: https://lore.kernel.org/r/20210928235442.201875-3-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: advansys: Fix kernel pointer leak

[ Upstream commit d4996c6eac4c81b8872043e9391563f67f13e406 ]

Pointers should be printed with %p or %px rather than cast to 'unsigned
long' and printed with %lx.

Change %lx to %p to print the hashed pointer.

Link: https://lore.kernel.org/r/20210929122538.1158235-1-qtxuning1999@sjtu.edu.cn
Signed-off-by: Guo Zhi <qtxuning1999@sjtu.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: nau8824: Add DMI quirk mechanism for active-high jack-detect

[ Upstream commit 92d3360108f1839ca40451bad20ff67dd24a1964 ]

Add a quirk mechanism to allow specifying that active-high jack-detection
should be used on platforms where this info is not available in devicetree.

And add an entry for the Cyberbook T116 tablet to the DMI table, so that
jack-detection will work properly on this tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211002211459.110124-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt5651: Use IRQF_NO_AUTOEN when requesting the IRQ

[ Upstream commit 6e037b72cf4ea6c28a131ea021d63ee4e7e6fa64 ]

Use the new IRQF_NO_AUTOEN flag when requesting the IRQ, rather then
disabling it immediately after requesting it.

This fixes a possible race where the IRQ might trigger between requesting
and disabling it; and this also leads to a small code cleanup.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211003132255.31743-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: es8316: Use IRQF_NO_AUTOEN when requesting the IRQ

[ Upstream commit 1cf2aa665901054b140eb71748661ceae99b6b5a ]

Use the new IRQF_NO_AUTOEN flag when requesting the IRQ, rather then
disabling it immediately after requesting it.

This fixes a possible race where the IRQ might trigger between requesting
and disabling it; and this also leads to a small code cleanup.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211003132255.31743-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: imx6ul: Move csi_sel mux to correct base register

[ Upstream commit 2f9d61869640f732599ec36b984c2b5c46067519 ]

The csi_sel mux register is located in the CCM register base and not the
CCM_ANALOG register base. So move it to the correct position in code.

Otherwise changing the parent of the csi clock can lead to a complete
system failure due to the CCM_ANALOG_PLL_SYS_TOG register being falsely
modified.

Also remove the SET_RATE_PARENT flag since one possible supply for the
csi_sel mux is the system PLL which we don't want to modify.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20210927072857.3940880-1-s.riedmueller@phytec.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: disable implicit feedback sync for Behringer UFX1204 and UFX1604

[ Upstream commit 28c369e60827f706cef4604a3e2848198f25bd26 ]

Behringer UFX1204 and UFX1604 have Synchronous endpoints to which
current ALSA code applies implicit feedback sync as if they were
Asynchronous endpoints. This breaks UAC compliance and is unneeded.

The commit 5e35dc0338d85ccebacf3f77eca1e5dea73155e8 and subsequent
1a15718b41df026cffd0e42cfdc38a1384ce19f9 were meant to clear up noise.

Unfortunately, noise persisted for those using higher sample rates and
this was only solved by commit d2e8f641257d0d3af6e45d6ac2d6f9d56b8ea964

Since there are no more reports of noise, let's get rid of the
implicit-fb quirks breaking UAC compliance.

Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Link: https://lore.kernel.org/r/YVYSnoQ7nxLXT0Dq@geday
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: core: Fix scsi_mode_sense() buffer length handling

[ Upstream commit 17b49bcbf8351d3dbe57204468ac34f033ed60bc ]

Several problems exist with scsi_mode_sense() buffer length handling:

 1) The allocation length field of the MODE SENSE(10) command is 16-bits,
    occupying bytes 7 and 8 of the CDB. With this command, access to mode
    pages larger than 255 bytes is thus possible. However, the CDB
    allocation length field is set by assigning len to byte 8 only, thus
    truncating buffer length larger than 255.

 2) If scsi_mode_sense() is called with len smaller than 8 with
    sdev->use_10_for_ms set, or smaller than 4 otherwise, the buffer length
    is increased to 8 and 4 respectively, and the buffer is zero filled
    with these increased values, thus corrupting the memory following the
    buffer.

Fix these 2 problems by using put_unaligned_be16() to set the allocation
length field of MODE SENSE(10) CDB and by returning an error when len is
too small.

Furthermore, if len is larger than 255B, always try MODE SENSE(10) first,
even if the device driver did not set sdev->use_10_for_ms. In case of
invalid opcode error for MODE SENSE(10), access to mode pages larger than
255 bytes are not retried using MODE SENSE(6). To avoid buffer length
overflows for the MODE_SENSE(10) case, check that len is smaller than 65535
bytes.

While at it, also fix the folowing:

 * Use get_unaligned_be16() to retrieve the mode data length and block
   descriptor length fields of the mode sense reply header instead of using
   an open coded calculation.

 * Fix the kdoc dbd argument explanation: the DBD bit stands for Disable
   Block Descriptor, which is the opposite of what the dbd argument
   description was.

Link: https://lore.kernel.org/r/20210820070255.682775-2-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: hda-dai: fix potential locking issue

[ Upstream commit a20f3b10de61add5e14b6ce4df982f4df2a4cbbc ]

The initial hdac_stream code was adapted a third time with the same
locking issues. Move the spin_lock outside the loops and make sure the
fields are protected on read/write.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210924192417.169243-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Separate HW and SW l/rkeys

[ Upstream commit 001345339f4ca85790a1644a74e33ae77ac116be ]

Separate software and simulated hardware lkeys and rkeys for MRs and MWs.
This makes struct ib_mr and struct ib_mw isolated from hardware changes
triggered by executing work requests.

This change fixes a bug seen in blktest.

Link: https://lore.kernel.org/r/20210914164206.19768-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ls1012a: Add serial alias for ls1012a-rdb

[ Upstream commit 7f31ae6e01da140e34d6513815253e811019f016 ]

U-boot atempts to read serial alias value for ls1012a-rdb but couldn't
do so as it is not initialised and thus, FDT_ERR_NOTFOUND error is
reported while booting linux.

Loading fdt from FIT Image at a0000000 ...
   Description:  ls1012ardb-dtb
     Type:         Flat Device Tree
     Data Start:   0xab111474
     Data Size:    11285 Bytes = 11 KiB
     Architecture: AArch64
     Load Address: 0x90000000
   Loading fdt from 0xab111474 to 0x90000000
   Booting using the fdt blob at 0x90000000
   Uncompressing Kernel Image
   Loading Device Tree to 000000008fffa000, end 000000008ffffc14 ... OK
WARNING: fdt_fixup_stdout: could not read serial0 alias: FDT_ERR_NOTFOUND
NOTICE:  RNG: INSTANTIATED

Starting kernel ...

Fix the above error by specifying serial value to duart.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: freescale: fix arm,sp805 compatible string

[ Upstream commit 99a7cacc66cae92db40139b57689be2af75fc6b8 ]

According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
  compatible = "arm,sp805", "arm,primecell";

The current compatible string doesn't exist at all. Fix it.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845: Fix qcom,controlled-remotely property

[ Upstream commit 1c8bf398b6b51eb085a49036ad8f9c000171cce1 ]

Property qcom,controlled-remotely should be boolean.  Fix it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-4-shawn.guo@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: ipq8074: Fix qcom,controlled-remotely property

[ Upstream commit 8c97f0ac4dc8f1743eb8e8a49f66189e13ae45e9 ]

Property qcom,controlled-remotely should be boolean.  Fix it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-3-shawn.guo@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: ipq6018: Fix qcom,controlled-remotely property

[ Upstream commit 3509de752ea14c7e5781b3a56a4a0bf832f5723a ]

Property qcom,controlled-remotely should be boolean.  Fix it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-2-shawn.guo@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency

[ Upstream commit 3f1dcaff642e75c1d2ad03f783fa8a3b1f56dd50 ]

The entry/exit latency and minimum residency in state for the idle
states of MSM8998 were ..bad: first of all, for all of them the
timings were written for CPU sleep but the min-residency-us param
was miscalculated (supposedly, while porting this from downstream);
Then, the power collapse states are setting PC on both the CPU
cluster *and* the L2 cache, which have different timings: in the
specific case of L2 the times are higher so these ones should be
taken into account instead of the CPU ones.

This parameter misconfiguration was not giving particular issues
because on MSM8998 there was no CPU scaling at all, so cluster/L2
power collapse was rarely (if ever) hit.
When CPU scaling is enabled, though, the wrong timings will produce
SoC unstability shown to the user as random, apparently error-less,
sudden reboots and/or lockups.

This set of parameters are stabilizing the SoC when CPU scaling is
ON and when power collapse is frequently hit.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901183123.1087392-3-angelogioacchino.delregno@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: BCM53016: Specify switch ports for Meraki MR32

[ Upstream commit 6abc4ca5a28070945e0d68cb4160b309bfbf4b8b ]

the switch identifies itself as a BCM53012 (rev 5)...
This patch has been tested & verified on OpenWrt's
snapshot with Linux 5.10 (didn't test any older kernels).
The MR32 is able to "talk to the network" as before with
OpenWrt's SWITCHDEV b53 driver.

| b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5
| libphy: dsa slave smi: probed
| b53-srab-switch 18007000.ethernet-switch poe (uninitialized):
| PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
| b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks.
| Please migrate to PHYLINK!
| DSA: tree 0 setup

Reported-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8723bs: remove a third possible deadlock

[ Upstream commit bdc1bbdbaa92df19a14d4c1902088c8432b46c6f ]

The assoc_timer takes the pmlmepriv->lock and various functions which
take the pmlmepriv->scanned_queue.lock first take the pmlmepriv->lock,
this means that we cannot have code which waits for the timer
(timer_del_sync) while holding the pmlmepriv->scanned_queue.lock
to avoid a triangle deadlock:

[  363.139361] ======================================================
[  363.139377] WARNING: possible circular locking dependency detected
[  363.139396] 5.15.0-rc1+ #470 Tainted: G         C  E
[  363.139413] ------------------------------------------------------
[  363.139424] RTW_CMD_THREAD/2466 is trying to acquire lock:
[  363.139441] ffffbacd00699038 (&pmlmepriv->lock){+.-.}-{2:2}, at: _rtw_join_timeout_handler+0x3c/0x160 [r8723bs]
[  363.139598]
               but task is already holding lock:
[  363.139610] ffffbacd00128ea0 ((&pmlmepriv->assoc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x5/0x260
[  363.139673]
               which lock already depends on the new lock.

[  363.139684]
               the existing dependency chain (in reverse order) is:
[  363.139696]
               -> #2 ((&pmlmepriv->assoc_timer)){+.-.}-{0:0}:
[  363.139734]        del_timer_sync+0x59/0x100
[  363.139762]        rtw_joinbss_event_prehandle+0x342/0x640 [r8723bs]
[  363.139870]        report_join_res+0xdf/0x110 [r8723bs]
[  363.139980]        OnAssocRsp+0x17a/0x200 [r8723bs]
[  363.140092]        rtw_recv_entry+0x190/0x1120 [r8723bs]
[  363.140209]        rtl8723b_process_phy_info+0x3f9/0x750 [r8723bs]
[  363.140318]        tasklet_action_common.constprop.0+0xe8/0x110
[  363.140345]        __do_softirq+0xde/0x485
[  363.140372]        __irq_exit_rcu+0xd0/0x100
[  363.140393]        irq_exit_rcu+0xa/0x20
[  363.140413]        common_interrupt+0x83/0xa0
[  363.140440]        asm_common_interrupt+0x1e/0x40
[  363.140463]        finish_task_switch.isra.0+0x157/0x3d0
[  363.140492]        __schedule+0x447/0x1880
[  363.140516]        schedule+0x59/0xc0
[  363.140537]        smpboot_thread_fn+0x161/0x1c0
[  363.140565]        kthread+0x143/0x160
[  363.140585]        ret_from_fork+0x22/0x30
[  363.140614]
               -> #1 (&pmlmepriv->scanned_queue.lock){+.-.}-{2:2}:
[  363.140653]        _raw_spin_lock_bh+0x34/0x40
[  363.140675]        rtw_free_network_queue+0x31/0x80 [r8723bs]
[  363.140776]        rtw_sitesurvey_cmd+0x79/0x1e0 [r8723bs]
[  363.140869]        rtw_cfg80211_surveydone_event_callback+0x3cf/0x470 [r8723bs]
[  363.140973]        rdev_scan+0x42/0x1a0 [cfg80211]
[  363.141307]        nl80211_trigger_scan+0x566/0x660 [cfg80211]
[  363.141635]        genl_family_rcv_msg_doit+0xcd/0x110
[  363.141661]        genl_rcv_msg+0xce/0x1c0
[  363.141680]        netlink_rcv_skb+0x50/0xf0
[  363.141699]        genl_rcv+0x24/0x40
[  363.141717]        netlink_unicast+0x16d/0x230
[  363.141736]        netlink_sendmsg+0x22b/0x450
[  363.141755]        sock_sendmsg+0x5e/0x60
[  363.141781]        ____sys_sendmsg+0x22f/0x270
[  363.141803]        ___sys_sendmsg+0x81/0xc0
[  363.141828]        __sys_sendmsg+0x49/0x80
[  363.141851]        do_syscall_64+0x3b/0x90
[  363.141873]        entry_SYSCALL_64_after_hwframe+0x44/0xae
[  363.141895]
               -> #0 (&pmlmepriv->lock){+.-.}-{2:2}:
[  363.141930]        __lock_acquire+0x1158/0x1de0
[  363.141954]        lock_acquire+0xb5/0x2b0
[  363.141974]        _raw_spin_lock_bh+0x34/0x40
[  363.141993]        _rtw_join_timeout_handler+0x3c/0x160 [r8723bs]
[  363.142097]        call_timer_fn+0x94/0x260
[  363.142122]        __run_timers.part.0+0x1bf/0x290
[  363.142147]        run_timer_softirq+0x26/0x50
[  363.142171]        __do_softirq+0xde/0x485
[  363.142193]        __irq_exit_rcu+0xd0/0x100
[  363.142215]        irq_exit_rcu+0xa/0x20
[  363.142235]        sysvec_apic_timer_interrupt+0x72/0x90
[  363.142260]        asm_sysvec_apic_timer_interrupt+0x12/0x20
[  363.142283]        __module_address.part.0+0x0/0xd0
[  363.142309]        is_module_address+0x25/0x40
[  363.142334]        static_obj+0x4f/0x60
[  363.142361]        lockdep_init_map_type+0x47/0x220
[  363.142382]        __init_swait_queue_head+0x45/0x60
[  363.142408]        mmc_wait_for_req+0x4a/0xc0 [mmc_core]
[  363.142504]        mmc_wait_for_cmd+0x55/0x70 [mmc_core]
[  363.142592]        mmc_io_rw_direct+0x75/0xe0 [mmc_core]
[  363.142691]        sdio_writeb+0x2e/0x50 [mmc_core]
[  363.142788]        _sd_cmd52_write+0x62/0x80 [r8723bs]
[  363.142885]        sd_cmd52_write+0x6c/0xb0 [r8723bs]
[  363.142981]        rtl8723bs_set_hal_ops+0x982/0x9b0 [r8723bs]
[  363.143089]        rtw_write16+0x1e/0x30 [r8723bs]
[  363.143184]        SetHwReg8723B+0xcc9/0xd30 [r8723bs]
[  363.143294]        mlmeext_joinbss_event_callback+0x17a/0x1a0 [r8723bs]
[  363.143405]        rtw_joinbss_event_callback+0x11/0x20 [r8723bs]
[  363.143507]        mlme_evt_hdl+0x4d/0x70 [r8723bs]
[  363.143620]        rtw_cmd_thread+0x168/0x3c0 [r8723bs]
[  363.143712]        kthread+0x143/0x160
[  363.143732]        ret_from_fork+0x22/0x30
[  363.143757]
               other info that might help us debug this:

[  363.143768] Chain exists of:
                 &pmlmepriv->lock --> &pmlmepriv->scanned_queue.lock --> (&pmlmepriv->assoc_timer)

[  363.143809]  Possible unsafe locking scenario:

[  363.143819]        CPU0                    CPU1
[  363.143831]        ----                    ----
[  363.143841]   lock((&pmlmepriv->assoc_timer));
[  363.143862]                                lock(&pmlmepriv->scanned_queue.lock);
[  363.143882]                                lock((&pmlmepriv->assoc_timer));
[  363.143902]   lock(&pmlmepriv->lock);
[  363.143921]
                *** DEADLOCK ***

Make rtw_joinbss_event_prehandle() release the scanned_queue.lock before
it deletes the timer to avoid this (it is still holding pmlmepriv->lock
protecting against racing the timer).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920145502.155454-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8723bs: remove a second possible deadlock

[ Upstream commit a7ac783c338bafc04d3259600646350dba989043 ]

Lockdep complains about rtw_free_assoc_resources() taking the sta_hash_lock
followed by it calling rtw_free_stainfo() which takes xmitpriv->lock.
While the rtl8723bs_xmit_thread takes the sta_hash_lock while already
holding the xmitpriv->lock:

[  103.849756] ======================================================
[  103.849761] WARNING: possible circular locking dependency detected
[  103.849767] 5.15.0-rc1+ #470 Tainted: G         C  E
[  103.849773] ------------------------------------------------------
[  103.849776] wpa_supplicant/695 is trying to acquire lock:
[  103.849781] ffffa5d0c0562b00 (&pxmitpriv->lock){+.-.}-{2:2}, at: rtw_free_stainfo+0x8a/0x510 [r8723bs]
[  103.849840]
               but task is already holding lock:
[  103.849843] ffffa5d0c05636a8 (&pstapriv->sta_hash_lock){+.-.}-{2:2}, at: rtw_free_assoc_resources+0x48/0x110 [r8723bs]
[  103.849881]
               which lock already depends on the new lock.

[  103.849884]
               the existing dependency chain (in reverse order) is:
[  103.849887]
               -> #1 (&pstapriv->sta_hash_lock){+.-.}-{2:2}:
[  103.849898]        _raw_spin_lock_bh+0x34/0x40
[  103.849913]        rtw_get_stainfo+0x93/0x110 [r8723bs]
[  103.849948]        rtw_make_wlanhdr+0x14a/0x270 [r8723bs]
[  103.849983]        rtw_xmitframe_coalesce+0x5c/0x6c0 [r8723bs]
[  103.850019]        rtl8723bs_xmit_thread+0x4ac/0x620 [r8723bs]
[  103.850050]        kthread+0x143/0x160
[  103.850058]        ret_from_fork+0x22/0x30
[  103.850067]
               -> #0 (&pxmitpriv->lock){+.-.}-{2:2}:
[  103.850077]        __lock_acquire+0x1158/0x1de0
[  103.850084]        lock_acquire+0xb5/0x2b0
[  103.850090]        _raw_spin_lock_bh+0x34/0x40
[  103.850095]        rtw_free_stainfo+0x8a/0x510 [r8723bs]
[  103.850130]        rtw_free_assoc_resources+0x53/0x110 [r8723bs]
[  103.850159]        PHY_IQCalibrate_8723B+0x122b/0x36a0 [r8723bs]
[  103.850189]        cfg80211_disconnect+0x173/0x320 [cfg80211]
[  103.850331]        nl80211_disconnect+0x6e/0xb0 [cfg80211]
[  103.850422]        genl_family_rcv_msg_doit+0xcd/0x110
[  103.850430]        genl_rcv_msg+0xce/0x1c0
[  103.850435]        netlink_rcv_skb+0x50/0xf0
[  103.850441]        genl_rcv+0x24/0x40
[  103.850446]        netlink_unicast+0x16d/0x230
[  103.850452]        netlink_sendmsg+0x22b/0x450
[  103.850457]        sock_sendmsg+0x5e/0x60
[  103.850465]        ____sys_sendmsg+0x22f/0x270
[  103.850472]        ___sys_sendmsg+0x81/0xc0
[  103.850479]        __sys_sendmsg+0x49/0x80
[  103.850485]        do_syscall_64+0x3b/0x90
[  103.850493]        entry_SYSCALL_64_after_hwframe+0x44/0xae
[  103.850500]
               other info that might help us debug this:

[  103.850504]  Possible unsafe locking scenario:

[  103.850507]        CPU0                    CPU1
[  103.850510]        ----                    ----
[  103.850512]   lock(&pstapriv->sta_hash_lock);
[  103.850518]                                lock(&pxmitpriv->lock);
[  103.850524]                                lock(&pstapriv->sta_hash_lock);
[  103.850530]   lock(&pxmitpriv->lock);
[  103.850535]
                *** DEADLOCK ***

Push the taking of sta_hash_lock down into rtw_free_stainfo(),
where the critical section is, this allows taking the lock after
rtw_free_stainfo() has released pxmitpriv->lock.

This requires changing rtw_free_all_stainfo() so that it does its freeing
in 2 steps, first moving all stainfo-s to free to a local list while
holding the sta_hash_lock and then walking that list to call
rtw_free_stainfo() on them without holding the sta_hash_lock.

Pushing the taking of sta_hash_lock down into rtw_free_stainfo(),
also fixes a whole bunch of callers of rtw_free_stainfo() which
were not holding that lock even though they should.

Note that this also fixes the deadlock from the "remove possible
deadlock when disconnect" patch in a different way. But the
changes from that patch offer a nice locking cleanup regardless.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920145502.155454-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8723bs: remove possible deadlock when disconnect (v2)

[ Upstream commit 54659ca026e586bbb33a7e60daa6443a3ac6b5df ]

when turning off a connection, lockdep complains with the
following warning (a modprobe has been done but the same
happens with a disconnection from NetworkManager,
it's enough to trigger a cfg80211_disconnect call):

[  682.855867] ======================================================
[  682.855877] WARNING: possible circular locking dependency detected
[  682.855887] 5.14.0-rc6+ #16 Tainted: G         C OE
[  682.855898] ------------------------------------------------------
[  682.855906] modprobe/1770 is trying to acquire lock:
[  682.855916] ffffb6d000332b00 (&pxmitpriv->lock){+.-.}-{2:2},
at: rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.856073]
               but task is already holding lock:
[  682.856081] ffffb6d0003336a8 (&pstapriv->sta_hash_lock){+.-.}-{2:2},
at: rtw_free_assoc_resources+0x48/0x110 [r8723bs]
[  682.856207]
               which lock already depends on the new lock.

[  682.856215]
               the existing dependency chain (in reverse order) is:
[  682.856223]
               -> #1 (&pstapriv->sta_hash_lock){+.-.}-{2:2}:
[  682.856247]        _raw_spin_lock_bh+0x34/0x40
[  682.856265]        rtw_get_stainfo+0x9a/0x110 [r8723bs]
[  682.856389]        rtw_xmit_classifier+0x27/0x130 [r8723bs]
[  682.856515]        rtw_xmitframe_enqueue+0xa/0x20 [r8723bs]
[  682.856642]        rtl8723bs_hal_xmit+0x3b/0xb0 [r8723bs]
[  682.856752]        rtw_xmit+0x4ef/0x890 [r8723bs]
[  682.856879]        _rtw_xmit_entry+0xba/0x350 [r8723bs]
[  682.856981]        dev_hard_start_xmit+0xee/0x320
[  682.856999]        sch_direct_xmit+0x8c/0x330
[  682.857014]        __dev_queue_xmit+0xba5/0xf00
[  682.857030]        packet_sendmsg+0x981/0x1b80
[  682.857047]        sock_sendmsg+0x5b/0x60
[  682.857060]        __sys_sendto+0xf1/0x160
[  682.857073]        __x64_sys_sendto+0x24/0x30
[  682.857087]        do_syscall_64+0x3a/0x80
[  682.857102]        entry_SYSCALL_64_after_hwframe+0x44/0xae
[  682.857117]
               -> #0 (&pxmitpriv->lock){+.-.}-{2:2}:
[  682.857142]        __lock_acquire+0xfd9/0x1b50
[  682.857158]        lock_acquire+0xb4/0x2c0
[  682.857172]        _raw_spin_lock_bh+0x34/0x40
[  682.857185]        rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.857308]        rtw_free_assoc_resources+0x53/0x110 [r8723bs]
[  682.857415]        cfg80211_rtw_disconnect+0x4b/0x70 [r8723bs]
[  682.857522]        cfg80211_disconnect+0x12e/0x2f0 [cfg80211]
[  682.857759]        cfg80211_leave+0x2b/0x40 [cfg80211]
[  682.857961]        cfg80211_netdev_notifier_call+0xa9/0x560 [cfg80211]
[  682.858163]        raw_notifier_call_chain+0x41/0x50
[  682.858180]        __dev_close_many+0x62/0x100
[  682.858195]        dev_close_many+0x7d/0x120
[  682.858209]        unregister_netdevice_many+0x416/0x680
[  682.858225]        unregister_netdevice_queue+0xab/0xf0
[  682.858240]        unregister_netdev+0x18/0x20
[  682.858255]        rtw_unregister_netdevs+0x28/0x40 [r8723bs]
[  682.858360]        rtw_dev_remove+0x24/0xd0 [r8723bs]
[  682.858463]        sdio_bus_remove+0x31/0xd0 [mmc_core]
[  682.858532]        device_release_driver_internal+0xf7/0x1d0
[  682.858550]        driver_detach+0x47/0x90
[  682.858564]        bus_remove_driver+0x77/0xd0
[  682.858579]        rtw_drv_halt+0xc/0x678 [r8723bs]
[  682.858685]        __x64_sys_delete_module+0x13f/0x250
[  682.858699]        do_syscall_64+0x3a/0x80
[  682.858715]        entry_SYSCALL_64_after_hwframe+0x44/0xae
[  682.858729]
               other info that might help us debug this:

[  682.858737]  Possible unsafe locking scenario:

[  682.858744]        CPU0                    CPU1
[  682.858751]        ----                    ----
[  682.858758]   lock(&pstapriv->sta_hash_lock);
[  682.858772]                                lock(&pxmitpriv->lock);
[  682.858786]                                lock(&pstapriv->sta_hash_lock);
[  682.858799]   lock(&pxmitpriv->lock);
[  682.858812]
                *** DEADLOCK ***

[  682.858820] 5 locks held by modprobe/1770:
[  682.858831]  #0: ffff8d870697d980 (&dev->mutex){....}-{3:3},
at: device_release_driver_internal+0x1a/0x1d0
[  682.858869]  #1: ffffffffbdbbf1c8 (rtnl_mutex){+.+.}-{3:3},
at: unregister_netdev+0xe/0x20
[  682.858906]  #2: ffff8d87054ee5e8 (&rdev->wiphy.mtx){+.+.}-{3:3},
at: cfg80211_netdev_notifier_call+0x9e/0x560 [cfg80211]
[  682.859131]  #3: ffff8d870f2bc8f0 (&wdev->mtx){+.+.}-{3:3},
at: cfg80211_leave+0x20/0x40 [cfg80211]
[  682.859354]  #4: ffffb6d0003336a8 (&pstapriv->sta_hash_lock){+.-.}-{2:2},
at: rtw_free_assoc_resources+0x48/0x110 [r8723bs]
[  682.859482]
               stack backtrace:
[  682.859491] CPU: 1 PID: 1770 Comm: modprobe Tainted: G
C OE     5.14.0-rc6+ #16
[  682.859507] Hardware name: LENOVO 80NR/Madrid, BIOS DACN25WW 08/20/2015
[  682.859517] Call Trace:
[  682.859531]  dump_stack_lvl+0x56/0x6f
[  682.859551]  check_noncircular+0xdb/0xf0
[  682.859579]  __lock_acquire+0xfd9/0x1b50
[  682.859606]  lock_acquire+0xb4/0x2c0
[  682.859623]  ? rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.859752]  ? mark_held_locks+0x48/0x70
[  682.859769]  ? rtw_free_stainfo+0x4a/0x4a0 [r8723bs]
[  682.859898]  _raw_spin_lock_bh+0x34/0x40
[  682.859914]  ? rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.860039]  rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.860171]  rtw_free_assoc_resources+0x53/0x110 [r8723bs]
[  682.860286]  cfg80211_rtw_disconnect+0x4b/0x70 [r8723bs]
[  682.860397]  cfg80211_disconnect+0x12e/0x2f0 [cfg80211]
[  682.860629]  cfg80211_leave+0x2b/0x40 [cfg80211]
[  682.860836]  cfg80211_netdev_notifier_call+0xa9/0x560 [cfg80211]
[  682.861048]  ? __lock_acquire+0x4dc/0x1b50
[  682.861070]  ? lock_is_held_type+0xa8/0x110
[  682.861089]  ? lock_is_held_type+0xa8/0x110
[  682.861104]  ? find_held_lock+0x2d/0x90
[  682.861120]  ? packet_notifier+0x173/0x300
[  682.861141]  ? lock_release+0xb3/0x250
[  682.861160]  ? packet_notifier+0x192/0x300
[  682.861184]  raw_notifier_call_chain+0x41/0x50
[  682.861205]  __dev_close_many+0x62/0x100
[  682.861224]  dev_close_many+0x7d/0x120
[  682.861245]  unregister_netdevice_many+0x416/0x680
[  682.861264]  ? find_held_lock+0x2d/0x90
[  682.861284]  unregister_netdevice_queue+0xab/0xf0
[  682.861306]  unregister_netdev+0x18/0x20
[  682.861325]  rtw_unregister_netdevs+0x28/0x40 [r8723bs]
[  682.861434]  rtw_dev_remove+0x24/0xd0 [r8723bs]
[  682.861542]  sdio_bus_remove+0x31/0xd0 [mmc_core]
[  682.861615]  device_release_driver_internal+0xf7/0x1d0
[  682.861637]  driver_detach+0x47/0x90
[  682.861656]  bus_remove_driver+0x77/0xd0
[  682.861674]  rtw_drv_halt+0xc/0x678 [r8723bs]
[  682.861782]  __x64_sys_delete_module+0x13f/0x250
[  682.861801]  ? lockdep_hardirqs_on_prepare+0xf3/0x170
[  682.861817]  ? syscall_enter_from_user_mode+0x20/0x70
[  682.861836]  do_syscall_64+0x3a/0x80
[  682.861855]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  682.861873] RIP: 0033:0x7f6dbe85400b
[  682.861890] Code: 73 01 c3 48 8b 0d 6d 1e 0c 00 f7 d8 64 89
01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa
b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d
1e 0c 00 f7 d8 64 89 01 48
[  682.861906] RSP: 002b:00007ffe7a82f538 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[  682.861923] RAX: ffffffffffffffda RBX: 000055a64693bd20 RCX: 00007f6dbe85400b
[  682.861935] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055a64693bd88
[  682.861946] RBP: 000055a64693bd20 R08: 0000000000000000 R09: 0000000000000000
[  682.861957] R10: 00007f6dbe8c7ac0 R11: 0000000000000206 R12: 000055a64693bd88
[  682.861967] R13: 0000000000000000 R14: 000055a64693bd88 R15: 00007ffe7a831848

This happens because when we enqueue a frame for
transmission we do it under xmit_priv lock, then calling
rtw_get_stainfo (needed for enqueuing) takes sta_hash_lock
and this leads to the following lock dependency:

xmit_priv->lock -> sta_hash_lock

Turning off a connection will bring to call
rtw_free_assoc_resources which will set up
the inverse dependency:

sta_hash_lock -> xmit_priv_lock

This could lead to a deadlock as lockdep complains.

Fix it by removing the xmit_priv->lock around
rtw_xmitframe_enqueue call inside rtl8723bs_hal_xmit
and put it in a smaller critical section inside
rtw_xmit_classifier, the only place where
xmit_priv data are actually accessed.

Replace spin_{lock,unlock}_bh(pxmitpriv->lock)
in other tx paths leading to rtw_xmitframe_enqueue
call with spin_{lock,unlock}_bh(psta->sleep_q.lock)
- it's not clear why accessing a sleep_q was protected
by a spinlock on xmitpriv->lock.

This way is avoided the same faulty lock nesting
order.

Extra changes in v2 by Hans de Goede:
-Lift the taking of the struct __queue.lock spinlock out of
 rtw_free_xmitframe_queue() into the callers this allows also
 protecting a bunch of related state in rtw_free_stainfo():
-Protect psta->sleepq_len on rtw_free_xmitframe_queue(&psta->sleep_q);
-Protect struct tx_servq.tx_pending and tx_servq.qcnt when
 calling rtw_free_xmitframe_queue(&tx_servq.sta_pending)
-This also allows moving the spin_lock_bh(&pxmitpriv->lock); to below
 the sleep_q free-ing code, avoiding another ABBA locking issue

CC: Larry Finger <Larry.Finger@lwfinger.net>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Tested-on: Lenovo Ideapad MiiX 300-10IBY
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920145502.155454-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ux500: Skomer regulator fixes

[ Upstream commit 7aee0288beab72cdfa35af51f62e94373fca595d ]

AUX2 has slightly wrong voltage and AUX5 doesn't need to be
always on.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: tipd: Remove WARN_ON in tps6598x_block_read

[ Upstream commit b7a0a63f3fed57d413bb857de164ea9c3984bc4e ]

Calling tps6598x_block_read with a higher than allowed len can be
handled by just returning an error. There's no need to crash systems
with panic-on-warn enabled.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20210914140235.65955-3-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: musb: tusb6010: check return value after calling platform_get_resource()

[ Upstream commit 14651496a3de6807a17c310f63c894ea0c5d858e ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210915034925.2399823-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Use context lost quirk for otg

[ Upstream commit 9067839ff45a528bcb015cc2f24f656126b91e3f ]

Let's use SYSC_QUIRK_REINIT_ON_CTX_LOST quirk for am335x otg instead of
SYSC_QUIRK_REINIT_ON_RESUME quirk as we can now handle the context loss
in a more generic way.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Add quirk handling for reinit on context lost

[ Upstream commit 9d881361206ebcf6285c2ec2ef275aff80875347 ]

Some interconnect target modules such as otg and gpmc on am335x need a
re-init after resume. As we also have PM runtime cases where the context
may be lost, let's handle these all with cpu_pm.

For the am335x resume path, we already have cpu_pm_resume() call
cpu_pm_cluster_exit().

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/bnxt_re: Check if the vlan is valid before reporting

[ Upstream commit 6bda39149d4b8920fdb8744090653aca3daa792d ]

When VF is configured with default vlan, HW strips the vlan from the
packet and driver receives it in Rx completion. VLAN needs to be reported
for UD work completion only if the vlan is configured on the host. Add a
check for valid vlan in the UD receive path.

Link: https://lore.kernel.org/r/1631709163-2287-12-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: hisilicon: fix arm,sp805 compatible string

[ Upstream commit 894d4f1f77d0e88f1f81af2e1e37333c1c41b631 ]

According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
  compatible = "arm,sp805", "arm,primecell";

The current compatible string doesn't exist at all. Fix it.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: Disable CDN DP on Pinebook Pro

[ Upstream commit 2513fa5c25d42f55ca5f0f0ab247af7c9fbfa3b1 ]

The CDN DP needs a PHY and a extcon to work correctly. But no extcon is
provided by the device-tree, which leads to an error:
cdn-dp fec00000.dp: [drm:cdn_dp_probe [rockchipdrm]] *ERROR* missing extcon or phy
cdn-dp: probe of fec00000.dp failed with error -22

Disable the CDN DP to make graphic work on the Pinebook Pro.

Reported-by: Guillaume Gardet <guillaume.gardet@arm.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Link: https://lore.kernel.org/r/20210715164101.11486-1-matthias.bgg@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: mt8195: Add missing of_node_put()

[ Upstream commit b2fc2c92d2fd34d93268f677e514936f50dd6b5c ]

The platform_node is returned by of_parse_phandle() should have
of_node_put() before return.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Link: https://lore.kernel.org/r/20210911081246.33867-1-cuibixuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()

[ Upstream commit 99154581b05c8fb22607afb7c3d66c1bace6aa5d ]

When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass
the requests to the adapter. If such an attempt fails, a local "fail_msg"
string is set and a log message output.  The job is then added to a
completions list for cancellation.

Processing of any further jobs from the txq list continues, but since
"fail_msg" remains set, jobs are added to the completions list regardless
of whether a wqe was passed to the adapter.  If successfully added to
txcmplq, jobs are added to both lists resulting in list corruption.

Fix by clearing the fail_msg string after adding a job to the completions
list. This stops the subsequent jobs from being added to the completions
list unless they had an appropriate failure.

Link: https://lore.kernel.org/r/20210910233159.115896-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm80xx: Fix memory leak during rmmod

[ Upstream commit 51e6ed83bb4ade7c360551fa4ae55c4eacea354b ]

Driver failed to release all memory allocated. This would lead to memory
leak during driver removal.

Properly free memory when the module is removed.

Link: https://lore.kernel.org/r/20210906170404.5682-5-Ajish.Koshy@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: broadcom: bcm4908: Move reboot syscon out of bus

[ Upstream commit 6cf9f70255b90b540b9cbde062f18fea29024a75 ]

This fixes following error for every bcm4908 DTS file:
bus@ff800000: reboot: {'type': 'object'} is not allowed for {'compatible': ['syscon-reboot'], 'regmap': [[15]], 'offset': [[52]], 'mask': [[1]]}

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: NSP: Fix mpcore, mmc node names

[ Upstream commit 15a563d008ef9d04df525f0c476cd7d7127bb883 ]

Running dtbs_check yielded the issues with bcm-nsp.dtsi.

Firstly this patch fixes the following message by appending "-bus" to
the mpcore node name:
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Secondly mmc node name. The label name can remain as is.
sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$'

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM5301X: Fix MDIO mux binding

[ Upstream commit 6ee0b56f7530e0ebb496fe15d0b54c5f3a1b5e17 ]

This fixes following error for all BCM5301X dts files:
mdio-bus-mux@18003000: compatible: ['mdio-mux-mmioreg'] is too short

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM5301X: Fix nodes names

[ Upstream commit 9dba049b6d32e95c0dd2a0d607f593ea288ac140 ]

This fixes following errors for all BCM5301X dts files:
chipcommonA@18000000: $nodename:0: 'chipcommonA@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
mdio-bus-mux@18003000: $nodename:0: 'mdio-bus-mux@18003000' does not match '^mdio-mux[\\-@]?'
dmu@1800c000: $nodename:0: 'dmu@1800c000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: wfx: ensure IRQ is ready before enabling it

[ Upstream commit 5e57c668dc097c6c27c973504706edec53f79281 ]

Since commit 5561770f80b1 ("staging: wfx: repair external IRQ for
SDIO"), wfx_sdio_irq_subscribe() enforce the device to use IRQs.
However, there is currently a race in this code. An IRQ may happen
before the IRQ has been registered.

The problem has observed during debug session when the device crashes
before the IRQ set up:

    [ 1.546] wfx-sdio mmc0:0001:1: started firmware 3.12.2 "WF200_ASIC_WFM_(Jenkins)_FW3.12.2" (API: 3.7, keyset: C0, caps: 0x00000002)
    [ 2.559] wfx-sdio mmc0:0001:1: time out while polling control register
    [ 3.565] wfx-sdio mmc0:0001:1: chip is abnormally long to answer
    [ 6.563] wfx-sdio mmc0:0001:1: chip did not answer
    [ 6.568] wfx-sdio mmc0:0001:1: hardware request CONFIGURATION (0x09) on vif 2 returned error -110
    [ 6.577] wfx-sdio mmc0:0001:1: PDS bytes 0 to 12: chip didn't reply (corrupted file?)
    [ 6.585] Unable to handle kernel NULL pointer dereference at virtual address 00000000
    [ 6.592] pgd = c0004000
    [ 6.595] [00000000] *pgd=00000000
    [ 6.598] Internal error: Oops - BUG: 17 [#1] THUMB2
    [ 6.603] Modules linked in:
    [ 6.606] CPU: 0 PID: 23 Comm: kworker/u2:1 Not tainted 3.18.19 #78
    [ 6.612] Workqueue: kmmcd mmc_rescan
    [ 6.616] task: c176d100 ti: c0e50000 task.ti: c0e50000
    [ 6.621] PC is at wake_up_process+0xa/0x14
    [ 6.625] LR is at sdio_irq+0x61/0x250
    [ 6.629] pc : [<c001e8ae>] lr : [<c00ec5bd>] psr: 600001b3
    [ 6.629] sp : c0e51bd8 ip : c0e51cc8 fp : 00000001
    [ 6.640] r10: 00000003 r9 : 00000000 r8 : c0003c34
    [ 6.644] r7 : c0e51bd8 r6 : c0003c30 r5 : 00000001 r4 : c0e78c00
    [ 6.651] r3 : 00000000 r2 : 00000000 r1 : 00000003 r0 : 00000000
    [ 6.657] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA Thumb Segment kernel
    [ 6.664] Control: 50c53c7d Table: 11fd8059 DAC: 00000015
    [ 6.670] Process kworker/u2:1 (pid: 23, stack limit = 0xc0e501b0)
    [ 6.676] Stack: (0xc0e51bd8 to 0xc0e52000)
    [...]
    [ 6.949] [<c001e8ae>] (wake_up_process) from [<c00ec5bd>] (sdio_irq+0x61/0x250)
    [ 6.956] [<c00ec5bd>] (sdio_irq) from [<c0025099>] (handle_irq_event_percpu+0x17/0x92)
    [ 6.964] [<c0025099>] (handle_irq_event_percpu) from [<c002512f>] (handle_irq_event+0x1b/0x24)
    [ 6.973] [<c002512f>] (handle_irq_event) from [<c0026577>] (handle_level_irq+0x5d/0x76)
    [ 6.981] [<c0026577>] (handle_level_irq) from [<c0024cc3>] (generic_handle_irq+0x13/0x1c)
    [ 6.989] [<c0024cc3>] (generic_handle_irq) from [<c0024dd9>] (__handle_domain_irq+0x31/0x48)
    [ 6.997] [<c0024dd9>] (__handle_domain_irq) from [<c0008359>] (ov_handle_irq+0x31/0xe0)
    [ 7.005] [<c0008359>] (ov_handle_irq) from [<c000af5b>] (__irq_svc+0x3b/0x5c)
    [ 7.013] Exception stack(0xc0e51c68 to 0xc0e51cb0)
    [...]
    [ 7.038] [<c000af5b>] (__irq_svc) from [<c01775aa>] (wait_for_common+0x9e/0xc4)
    [ 7.045] [<c01775aa>] (wait_for_common) from [<c00e1dc3>] (mmc_wait_for_req+0x4b/0xdc)
    [ 7.053] [<c00e1dc3>] (mmc_wait_for_req) from [<c00e1e83>] (mmc_wait_for_cmd+0x2f/0x34)
    [ 7.061] [<c00e1e83>] (mmc_wait_for_cmd) from [<c00e7b2b>] (mmc_io_rw_direct_host+0x71/0xac)
    [ 7.070] [<c00e7b2b>] (mmc_io_rw_direct_host) from [<c00e8f79>] (sdio_claim_irq+0x6b/0x116)
    [ 7.078] [<c00e8f79>] (sdio_claim_irq) from [<c00d8415>] (wfx_sdio_irq_subscribe+0x19/0x94)
    [ 7.086] [<c00d8415>] (wfx_sdio_irq_subscribe) from [<c00d5229>] (wfx_probe+0x189/0x2ac)
    [ 7.095] [<c00d5229>] (wfx_probe) from [<c00d83bf>] (wfx_sdio_probe+0x8f/0xcc)
    [ 7.102] [<c00d83bf>] (wfx_sdio_probe) from [<c00e7fbb>] (sdio_bus_probe+0x5f/0xa8)
    [ 7.109] [<c00e7fbb>] (sdio_bus_probe) from [<c00be229>] (driver_probe_device+0x59/0x134)
    [ 7.118] [<c00be229>] (driver_probe_device) from [<c00bd4d7>] (bus_for_each_drv+0x3f/0x4a)
    [ 7.126] [<c00bd4d7>] (bus_for_each_drv) from [<c00be1a5>] (device_attach+0x3b/0x52)
    [ 7.134] [<c00be1a5>] (device_attach) from [<c00bdc2b>] (bus_probe_device+0x17/0x4c)
    [ 7.141] [<c00bdc2b>] (bus_probe_device) from [<c00bcd69>] (device_add+0x2c5/0x334)
    [ 7.149] [<c00bcd69>] (device_add) from [<c00e80bf>] (sdio_add_func+0x23/0x44)
    [ 7.156] [<c00e80bf>] (sdio_add_func) from [<c00e79eb>] (mmc_attach_sdio+0x187/0x1ec)
    [ 7.164] [<c00e79eb>] (mmc_attach_sdio) from [<c00e31bd>] (mmc_rescan+0x18d/0x1fc)
    [ 7.172] [<c00e31bd>] (mmc_rescan) from [<c001a14f>] (process_one_work+0xd7/0x170)
    [ 7.179] [<c001a14f>] (process_one_work) from [<c001a59b>] (worker_thread+0x103/0x1bc)
    [ 7.187] [<c001a59b>] (worker_thread) from [<c001c731>] (kthread+0x7d/0x90)
    [ 7.194] [<c001c731>] (kthread) from [<c0008ce1>] (ret_from_fork+0x11/0x30)
    [ 7.201] Code: 2103 b580 2200 af00 (681b) 46bd
    [ 7.206] ---[ end trace 3ab50aced42eedb4 ]---

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20210913130203.1903622-33-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: a100: Fix thermal zone node name

[ Upstream commit 5c34c4e46e601554bfa370b23c8ae3c3c734e9f7 ]

The thermal zones one the A100 are called $device-thermal-zone.

However, the thermal zone binding explicitly requires that zones are
called *-thermal. Let's fix it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-50-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: h5: Fix GPU thermal zone node name

[ Upstream commit 94a0f2b0e4e0953d8adf319c44244ef7a57de32c ]

The GPU thermal zone is named gpu_thermal. However, the underscore is
an invalid character for a node name and the thermal zone binding
explicitly requires that zones are called *-thermal. Let's fix it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-48-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: sunxi: Fix OPPs node name

[ Upstream commit ffbe853a3f5a37fa0a511265b21abf097ffdbe45 ]

The operating-points-v2 nodes are named inconsistently, but mostly
either opp_table0 or gpu-opp-table.  However, the underscore is an
invalid character for a node name and the thermal zone binding
explicitly requires that zones are called opp-table-*. Let's fix it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-43-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: Unregister clocks/resets when unbinding

[ Upstream commit 9bec2b9c6134052994115d2d3374e96f2ccb9b9d ]

Currently, unbinding a CCU driver unmaps the device's MMIO region, while
leaving its clocks/resets and their providers registered. This can cause
a page fault later when some clock operation tries to perform MMIO. Fix
this by separating the CCU initialization from the memory allocation,
and then using a devres callback to unregister the clocks and resets.

This also fixes a memory leak of the `struct ccu_reset`, and uses the
correct owner (the specific platform driver) for the clocks and resets.

Early OF clock providers are never unregistered, and limited error
handling is possible, so they are mostly unchanged. The error reporting
is made more consistent by moving the message inside of_sunxi_ccu_probe.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901050526.45673-2-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: zynqmp: Fix serial compatible string

[ Upstream commit 812fa2f0e9d33564bd0131a69750e0d165f4c82a ]

Based on commit 65a2c14d4f00 ("dt-bindings: serial: convert Cadence UART
bindings to YAML") compatible string should look like differently that's
why fix it to be aligned with dt binding.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/89b36e0a6187cc6b05b27a035efdf79173bd4486.1628240307.git.michal.simek@xilinx.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: zynqmp: Do not duplicate flash partition label property

[ Upstream commit 167721a5909f867f8c18c8e78ea58e705ad9bbd4 ]

In kernel 5.4, support has been added for reading MTD devices via the nvmem
API.
For this the mtd devices are registered as read-only NVMEM providers under
sysfs with the same name as the flash partition label property.

So if flash partition label property of multiple flash devices are
identical then the second mtd device fails to get registered as a NVMEM
provider.

This patch fixes the issue by having different label property for different
flashes.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/6c4b9b9232b93d9e316a63c086540fd5bf6b8687.1623684253.git.michal.simek@xilinx.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.15.4

Link: https://lore.kernel.org/r/20211119171444.640508836@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-By: Scott Bruce <smbruce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ACPI: scan: Release PM resources blocked by unused objects"

commit 3b2b49e6dfdcf423506a771bf44cee842596351a upstream.

Revert commit c10383e8ddf4 ("ACPI: scan: Release PM resources blocked
by unused objects"), because it causes boot issues to appear on some
platforms.

Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Reported-by: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: Fix NULL pointer dereferences in of_thermal_ functions

commit 96cfe05051fd8543cdedd6807ec59a0e6c409195 upstream.

of_parse_thermal_zones() parses the thermal-zones node and registers a
thermal_zone device for each subnode. However, if a thermal zone is
consuming a thermal sensor and that thermal sensor device hasn't probed
yet, an attempt to set trip_point_*_temp for that thermal zone device
can cause a NULL pointer dereference. Fix it.

 console:/sys/class/thermal/thermal_zone87 # echo 120000 > trip_point_0_temp
 ...
 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
 ...
 Call trace:
  of_thermal_set_trip_temp+0x40/0xc4
  trip_point_temp_store+0xc0/0x1dc
  dev_attr_store+0x38/0x88
  sysfs_kf_write+0x64/0xc0
  kernfs_fop_write_iter+0x108/0x1d0
  vfs_write+0x2f4/0x368
  ksys_write+0x7c/0xec
  __arm64_sys_write+0x20/0x30
  el0_svc_common.llvm.7279915941325364641+0xbc/0x1bc
  do_el0_svc+0x28/0xa0
  el0_svc+0x14/0x24
  el0_sync_handler+0x88/0xec
  el0_sync+0x1c0/0x200

While at it, fix the possible NULL pointer dereference in other
functions as well: of_thermal_get_temp(), of_thermal_set_emul_temp(),
of_thermal_get_trend().

Suggested-by: David Collins <quic_collinsd@quicinc.com>
Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Avoid put_page() when GUP fails

commit 4716023a8f6a0f4a28047f14dd7ebdc319606b84 upstream.

PEBS PERF_SAMPLE_PHYS_ADDR events use perf_virt_to_phys() to convert PMU
sampled virtual addresses to physical using get_user_page_fast_only()
and page_to_phys().

Some get_user_page_fast_only() error cases return false, indicating no
page reference, but still initialize the output page pointer with an
unreferenced page. In these error cases perf_virt_to_phys() calls
put_page(). This causes page reference count underflow, which can lead
to unintentional page sharing.

Fix perf_virt_to_phys() to only put_page() if get_user_page_fast_only()
returns a referenced page.

Fixes: fc7ce9c74c3ad ("perf/core, x86: Add PERF_SAMPLE_PHYS_ADDR")
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211111021814.757086-1-gthelen@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add MSI masking quirk for Nvidia ION AHCI

commit f21082fb20dbfb3e42b769b59ef21c2a7f2c7c1f upstream.

The ION AHCI device pretends that MSI masking isn't a thing, while it
actually implements it and needs MSIs to be unmasked to work. Add a quirk
to that effect.

Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/r/CALjTZvbzYfBuLB+H=fj2J+9=DxjQ2Uqcy0if_PvmJ-nU-qEgkg@mail.gmail.com
Link: https://lore.kernel.org/r/20211104180130.3825416-3-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/MSI: Deal with devices lying about their MSI mask capability

commit 2226667a145db2e1f314d7f57fd644fe69863ab9 upstream.

It appears that some devices are lying about their mask capability,
pretending that they don't have it, while they actually do.
The net result is that now that we don't enable MSIs on such
endpoint.

Add a new per-device flag to deal with this. Further patches will
make use of it, sadly.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20211104180130.3825416-2-maz@kernel.org
Cc: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc/entry: fix trace test in syscall exit path

commit 3ec18fc7831e7d79e2d536dd1f3bc0d3ba425e8a upstream.

commit 8779e05ba8aa ("parisc: Fix ptrace check on syscall return")
fixed testing of TI_FLAGS. This uncovered a bug in the test mask.
syscall_restore_rfi is only used when the kernel needs to exit to
usespace with single or block stepping and the recovery counter
enabled. The test however used _TIF_SYSCALL_TRACE_MASK, which
includes a lot of bits that shouldn't be tested here.

Fix this by using TIF_SINGLESTEP and TIF_BLOCKSTEP directly.

I encountered this bug by enabling syscall tracepoints. Both in qemu and
on real hardware. As soon as i enabled the tracepoint (sys_exit_read,
but i guess it doesn't really matter which one), i got random page
faults in userspace almost immediately.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: btusb: Add support for TP-Link UB500 Adapter

commit 4fd6d490796171bf786090fee782e252186632e4 upstream.

Add support for TP-Link UB500 Adapter (RTL8761B)

* /sys/kernel/debug/usb/devices
T:  Bus=01 Lev=02 Prnt=05 Port=01 Cnt=01 Dev#= 78 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2357 ProdID=0604 Rev= 2.00
S:  Manufacturer=
S:  Product=TP-Link UB500 Adapter
S:  SerialNumber=E848B8C82000
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Nicholas Flintham <nick@flinny.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Szabolcs Sipos <labuwx@balfug.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Use blk_validate_block_size() to validate block size

commit af3c570fb0df422b4906ebd11c1bf363d89961d5 upstream.

Remove loop_validate_block_size() and use the block layer helper
to validate block size.

Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20211026144015.188-4-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: Add a helper to validate the block size

commit 570b1cac477643cbf01a45fa5d018430a1fddbce upstream.

There are some duplicated codes to validate the block
size in block drivers. This limitation actually comes
from block layer, so this patch tries to add a new block
layer helper for that.

Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20211026144015.188-2-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fortify: Explicitly disable Clang support

commit a52f8a59aef46b59753e583bf4b28fccb069ce64 upstream.

Clang has never correctly compiled the FORTIFY_SOURCE defenses due to
a couple bugs:

Eliding inlines with matching __builtin_* names
https://bugs.llvm.org/show_bug.cgi?id=50322

Incorrect __builtin_constant_p() of some globals
https://bugs.llvm.org/show_bug.cgi?id=41459

In the process of making improvements to the FORTIFY_SOURCE defenses, the
first (silent) bug (coincidentally) becomes worked around, but exposes
the latter which breaks the build. As such, Clang must not be used with
CONFIG_FORTIFY_SOURCE until at least latter bug is fixed (in Clang 13),
and the fortify routines have been rearranged.

Update the Kconfig to reflect the reality of the current situation.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/lkml/CAKwvOd=A+ueGV2ihdy5GtgR2fQbcXjjAtVxv3=cPjffpebZB7A@mail.gmail.com
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: allow preallocation for relocation inodes

commit 960a3166aed015887cd54423a6589ae4d0b65bd5 upstream

Now that we use a dedicated block group and regular writes for data
relocation, we can preallocate the space needed for a relocated inode,
just like we do in regular mode.

Essentially this reverts commit 32430c614844 ("btrfs: zoned: enable
relocation on a zoned filesystem") as it is not needed anymore.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: check for relocation inodes on zoned btrfs in should_nocow

commit 2adada886b26e998b5a624e72f0834ebfdc54cc7 upstream

Prepare for allowing preallocation for relocation inodes.

Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: use regular writes for relocation

commit e6d261e3b1f777b499ce8f535ed44dd1b69278b7 upstream

Now that we have a dedicated block group for relocation, we can use
REQ_OP_WRITE instead of  REQ_OP_ZONE_APPEND for writing out the data on
relocation.

Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: only allow one process to add pages to a relocation inode

commit 35156d852762b58855f513b4f8bb7f32d69dc9c5 upstream

Don't allow more than one process to add pages to a relocation inode on
a zoned filesystem, otherwise we cannot guarantee the sequential write
rule once we're filling preallocated extents on a zoned filesystem.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: add a dedicated data relocation block group

commit c2707a25562343511bf9a3a6a636a16a822204eb upstream

Relocation in a zoned filesystem can fail with a transaction abort with
error -22 (EINVAL). This happens because the relocation code assumes that
the extents we relocated the data to have the same size the source extents
had and ensures this by preallocating the extents.

But in a zoned filesystem we currently can't preallocate the extents as
this would break the sequential write required rule. Therefore it can
happen that the writeback process kicks in while we're still adding pages
to a delalloc range and starts writing out dirty pages.

This then creates destination extents that are smaller than the source
extents, triggering the following safety check in get_new_location():

 1034         if (num_bytes != btrfs_file_extent_disk_num_bytes(leaf, fi)) {
 1035                 ret = -EINVAL;
 1036                 goto out;
 1037         }

Temporarily create a dedicated block group for the relocation process, so
no non-relocation data writes can interfere with the relocation writes.

This is needed that we can switch the relocation process on a zoned
filesystem from the REQ_OP_ZONE_APPEND writing we use for data to a scheme
like in a non-zoned filesystem using REQ_OP_WRITE and preallocation.

Fixes: 32430c614844 ("btrfs: zoned: enable relocation on a zoned filesystem")
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: introduce btrfs_is_data_reloc_root

commit 37f00a6d2e9c97d6e7b5c3d47c49b714c3d0b99f upstream

There are several places in our codebase where we check if a root is the
root of the data reloc tree and subsequent patches will introduce more.

Factor out the check into a small helper function instead of open coding
it multiple times.

Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: Fix steal time asm constraints

commit 964b7aa0b040bdc6ec1c543ee620cda3f8b4c68a upstream.

In 64-bit mode, x86 instruction encoding allows us to use the low 8 bits
of any GPR as an 8-bit operand. In 32-bit mode, however, we can only use
the [abcd] registers. For which, GCC has the "q" constraint instead of
the less restrictive "r".

Also fix st->preempted, which is an input/output operand rather than an
input.

Fixes: 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time / preempted status")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <89bf72db1b859990355f9c40713a34e0d2d86c98.camel@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm: fb_helper: fix CONFIG_FB dependency"

This reverts commit c95380ba527ae0aee29b2a133c5d0c481d472759 which is
commit 606b102876e3741851dfb09d53f3ee57f650a52c upstream.

It causes some build problems as reported by Jiri.

Link: https://lore.kernel.org/r/9fdb2bf1-de52-1b9d-4783-c61ce39e8f51@kernel.org
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm: fb_helper: improve CONFIG_FB dependency"

This reverts commit 94e18f5a5dd1b5e3b89c665fc5ff780858b1c9f6 which is
commit 9d6366e743f37d36ef69347924ead7bcc596076e upstream.

It causes some build problems as reported by Jiri.

Link: https://lore.kernel.org/r/9fdb2bf1-de52-1b9d-4783-c61ce39e8f51@kernel.org
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

string: uninline memcpy_and_pad

commit 5c4e0a21fae877a7ef89be6dcc6263ec672372b8 upstream.

When building m68k:allmodconfig, recent versions of gcc generate the
following error if the length of UTS_RELEASE is less than 8 bytes.

  In function 'memcpy_and_pad',
    inlined from 'nvmet_execute_disc_identify' at
      drivers/nvme/target/discovery.c:268:2: arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 8 bytes from a region of size 7

Discussions around the problem suggest that this only happens if an
architecture does not provide strlen(), if -ffreestanding is provided as
compiler option, and if CONFIG_FORTIFY_SOURCE=n. All of this is the case
for m68k. The exact reasons are unknown, but seem to be related to the
ability of the compiler to evaluate the return value of strlen() and
the resulting execution flow in memcpy_and_pad(). It would be possible
to work around the problem by using sizeof(UTS_RELEASE) instead of
strlen(UTS_RELEASE), but that would only postpone the problem until the
function is called in a similar way. Uninline memcpy_and_pad() instead
to solve the problem for good.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.3

Link: https://lore.kernel.org/r/20211115165428.722074685@linuxfoundation.org
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Link: https://lore.kernel.org/r/20211116142631.571909964@linuxfoundation.org
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Link: https://lore.kernel.org/r/20211117101657.463560063@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20211118081919.507743013@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-By: Scott Bruce <smbruce@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: videobuf2-dma-sg: Fix buf->vb NULL pointer dereference

commit d55c3ee6b4c7b76326eb257403762f8bd7cc48c2 upstream.

Commit a4b83deb3e76 ("media: videobuf2: rework vb2_mem_ops API")
added a new vb member to struct vb2_dma_sg_buf, but it only added
code setting this to the vb2_dma_sg_alloc() function and not to the
vb2_dma_sg_get_userptr() and vb2_dma_sg_attach_dmabuf() which also
create vb2_dma_sg_buf objects.

This is causing a crash due to a NULL pointer deref when using
libcamera on devices with an Intel IPU3 (qcam app).

Fix these crashes by assigning buf->vb in the other 2 functions too,
note libcamera tests the vb2_dma_sg_get_userptr() path, the change
to the vb2_dma_sg_attach_dmabuf() path is untested.

Fixes: a4b83deb3e76 ("media: videobuf2: rework vb2_mem_ops API")
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: videobuf2: always set buffer vb2 pointer

commit 67f85135c57c8ea20b5417b28ae65e53dc2ec2c3 upstream.

We need to always link allocated vb2_dc_buf back to vb2_buffer because
we dereference vb2 in prepare() and finish() callbacks.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sev: Make the #VC exception stacks part of the default stacks storage

commit 541ac97186d9ea88491961a46284de3603c914fd upstream.

The size of the exception stacks was increased by the commit in Fixes,
resulting in stack sizes greater than a page in size. The #VC exception
handling was only mapping the first (bottom) page, resulting in an
SEV-ES guest failing to boot.

Make the #VC exception stacks part of the default exception stacks
storage and allocate them with a CONFIG_AMD_MEM_ENCRYPT=y .config. Map
them only when a SEV-ES guest has been detected.

Rip out the custom VC stacks mapping and storage code.

 [ bp: Steal and adapt Tom's commit message. ]

Fixes: 7fae4c24a2b8 ("x86: Increase exception stack sizes")
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lkml.kernel.org/r/YVt1IMjIs7pIZTRR@zn.tnic
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sev: Add an x86 version of cc_platform_has()

commit aa5a461171f98fde0df78c4f6b5018a1e967cf81 upstream.

Introduce an x86 version of the cc_platform_has() function. This will be
used to replace vendor specific calls like sme_active(), sev_active(),
etc.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-4-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/cc: Introduce a function to check for confidential computing features

commit 46b49b12f3fc5e1347dba37d4639e2165f447871 upstream.

In preparation for other confidential computing technologies, introduce
a generic helper function, cc_platform_has(), that can be used to
check for specific active confidential computing attributes, like
memory encryption. This is intended to eliminate having to add multiple
technology-specific checks to the code (e.g. if (sev_active() ||
tdx_active() || ... ).

 [ bp: s/_CC_PLATFORM_H/_LINUX_CC_PLATFORM_H/g ]

Co-developed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-3-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: Fix also no-alu32 strobemeta selftest

commit a20eac0af02810669e187cb623bc904908c423af upstream.

Previous fix aded bpf_clamp_umax() helper use to re-validate boundaries.
While that works correctly, it introduces more branches, which blows up
past 1 million instructions in no-alu32 variant of strobemeta selftests.

Switching len variable from u32 to u64 also fixes the issue and reduces
the number of validated instructions, so use that instead. Fix this
patch and bpf_clamp_umax() removed, both alu32 and no-alu32 selftests
pass.

Fixes: 0133c20480b1 ("selftests/bpf: Fix strobemeta selftest regression")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211101230118.1273019-1-andrii@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/x86/iopl: Adjust to the faked iopl CLI/STI usage

commit a72fdfd21e01c626273ddcf5ab740d4caef4be54 upstream.

Commit in Fixes changed the iopl emulation to not #GP on CLI and STI
because it would break some insane luserspace tools which would toggle
interrupts.

The corresponding selftest would rely on the fact that executing CLI/STI
would trigger a #GP and thus detect it this way but since that #GP is
not happening anymore, the detection is now wrong too.

Extend the test to actually look at the IF flag and whether executing
those insns had any effect on it. The STI detection needs to have the
fact that interrupts were previously disabled, passed in so do that from
the previous CLI test, i.e., STI test needs to follow a previous CLI one
for it to make sense.

Fixes: b968e84b509d ("x86/iopl: Fake iopl(3) CLI/STI usage")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20211030083939.13073-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: moxart: Fix null pointer dereference on pointer host

commit 0eab756f8821d255016c63bb55804c429ff4bdb1 upstream.

There are several error return paths that dereference the null pointer
host because the pointer has not yet been set to a valid value.
Fix this by adding a new out_mmc label and exiting via this label
to avoid the host clean up and hence the null pointer dereference.

Addresses-Coverity: ("Explicit null dereference")
Fixes: 8105c2abbf36 ("mmc: moxart: Fix reference count leaks in moxart_probe")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20211013100052.125461-1-colin.king@canonical.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: fix invalid dma_addr_t token assignment

commit 937e79c67740d1d84736730d679f3cb2552f990e upstream.

Using a kernel pointer in place of a dma_addr_t token can
lead to undefined behavior if that makes it into cache
management functions. The compiler caught one such attempt
in a cast:

drivers/net/wireless/ath/ath10k/mac.c: In function 'ath10k_add_interface':
drivers/net/wireless/ath/ath10k/mac.c:5586:47: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
 5586 |                         arvif->beacon_paddr = (dma_addr_t)arvif->beacon_buf;
      |                                               ^

Looking through how this gets used down the way, I'm fairly
sure that beacon_paddr is never accessed again for ATH10K_DEV_TYPE_HL
devices, and if it was accessed, that would be a bug.

Change the assignment to use a known-invalid address token
instead, which avoids the warning and makes it easier to catch
bugs if it does end up getting used.

Fixes: e263bdab9c0e ("ath10k: high latency fixes for beacon buffer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211014075153.3655910-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix memory leak of smb3_fs_context_dup::server_hostname

commit 869da64d071142d4ed562a3e909deb18e4e72c4e upstream.

Fix memory leak of smb3_fs_context_dup::server_hostname when parsing
and duplicating fs contexts during mount(2) as reported by kmemleak:

  unreferenced object 0xffff888125715c90 (size 16):
    comm "mount.cifs", pid 3832, jiffies 4304535868 (age 190.094s)
    hex dump (first 16 bytes):
      7a 65 6c 64 61 2e 74 65 73 74 00 6b 6b 6b 6b a5  zelda.test.kkkk.
    backtrace:
      [<ffffffff8168106e>] kstrdup+0x2e/0x60
      [<ffffffffa027a362>] smb3_fs_context_dup+0x392/0x8d0 [cifs]
      [<ffffffffa0136353>] cifs_smb3_do_mount+0x143/0x1700 [cifs]
      [<ffffffffa02795e8>] smb3_get_tree+0x2e8/0x520 [cifs]
      [<ffffffff817a19aa>] vfs_get_tree+0x8a/0x2d0
      [<ffffffff8181e3e3>] path_mount+0x423/0x1a10
      [<ffffffff8181fbca>] __x64_sys_mount+0x1fa/0x270
      [<ffffffff83ae364b>] do_syscall_64+0x3b/0x90
      [<ffffffff83c0007c>] entry_SYSCALL_64_after_hwframe+0x44/0xae
  unreferenced object 0xffff888111deed20 (size 32):
    comm "mount.cifs", pid 3832, jiffies 4304536044 (age 189.918s)
    hex dump (first 32 bytes):
      44 46 53 52 4f 4f 54 31 2e 5a 45 4c 44 41 2e 54  DFSROOT1.ZELDA.T
      45 53 54 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5  EST.kkkkkkkkkkk.
    backtrace:
      [<ffffffff8168118d>] kstrndup+0x2d/0x90
      [<ffffffffa027ab2e>] smb3_parse_devname+0x9e/0x360 [cifs]
      [<ffffffffa01870c8>] cifs_setup_volume_info+0xa8/0x470 [cifs]
      [<ffffffffa018c469>] connect_dfs_target+0x309/0xc80 [cifs]
      [<ffffffffa018d6cb>] cifs_mount+0x8eb/0x17f0 [cifs]
      [<ffffffffa0136475>] cifs_smb3_do_mount+0x265/0x1700 [cifs]
      [<ffffffffa02795e8>] smb3_get_tree+0x2e8/0x520 [cifs]
      [<ffffffff817a19aa>] vfs_get_tree+0x8a/0x2d0
      [<ffffffff8181e3e3>] path_mount+0x423/0x1a10
      [<ffffffff8181fbca>] __x64_sys_mount+0x1fa/0x270
      [<ffffffff83ae364b>] do_syscall_64+0x3b/0x90
      [<ffffffff83c0007c>] entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 7be3248f3139 ("cifs: To match file servers, make sure the server hostname matches")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: vidtv: move kfree(dvb) to vidtv_bridge_dev_release()

commit 112024a3b6dcfc62ec36ea0cf58b897f2ce54c59 upstream.

Adding kfree(dvb) to vidtv_bridge_remove() will remove the memory
too soon: if an application still has an open filehandle to the device
when the driver is unloaded, then when that filehandle is closed, a
use-after-free access takes place to the freed memory.

Move the kfree(dvb) to vidtv_bridge_dev_release() instead.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 76e21bb8be4f ("media: vidtv: Fix memory leak in remove")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Look at firmware version to determine using dmub on dcn21

commit 91adec9e07097e538691daed5d934e7886dd1dc3 upstream.

commit 652de07addd2 ("drm/amd/display: Fully switch to dmub for all dcn21
asics") switched over to using dmub on Renoir to fix Gitlab 1735, but this
implied a new dependency on newer firmware which might not be met on older
kernel versions.

Since sw_init runs before hw_init, there is an opportunity to determine
whether or not the firmware version is new to adjust the behavior.

Cc: Roman.Li@amd.com
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1772
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1735
Fixes: 652de07addd2 ("drm/amd/display: Fully switch to dmub for all dcn21 asics")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Partial revert of commit 6f9f17287e78

commit ea7a1019d8baf8503ecd6e3ec8436dec283569e6 upstream.

The premise of commit 6f9f17287e78 ("SUNRPC: Mitigate cond_resched() in
xprt_transmit()") was that cond_resched() is expensive and unnecessary
when there has been just a single send.
The point of cond_resched() is to ensure that tasks that should pre-empt
this one get a chance to do so when it is safe to do so. The code prior
to commit 6f9f17287e78 failed to take into account that it was keeping a
rpc_task pinned for longer than it needed to, and so rather than doing a
full revert, let's just move the cond_resched.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: aardvark: Fix PCIe Max Payload Size setting

commit a4e17d65dafdd3513042d8f00404c9b6068a825c upstream.

Change PCIe Max Payload Size setting in PCIe Device Control register to 512
bytes to align with PCIe Link Initialization sequence as defined in Marvell
Armada 3700 Functional Specification. According to the specification,
maximal Max Payload Size supported by this device is 512 bytes.

Without this kernel prints suspicious line:

    pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 16384, max 512)

With this change it changes to:

    pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 512, max 512)

Link: https://lore.kernel.org/r/20211005180952.6812-3-kabel@kernel.org
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add PCI_EXP_DEVCTL_PAYLOAD_* macros

commit 460275f124fb072dca218a6b43b6370eebbab20d upstream.

Define a macro PCI_EXP_DEVCTL_PAYLOAD_* for every possible Max Payload
Size in linux/pci_regs.h, in the same style as PCI_EXP_DEVCTL_READRQ_*.

Link: https://lore.kernel.org/r/20211005180952.6812-2-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/sun4i: Fix macros in sun8i_csc.h

commit c302c98da646409d657a473da202f10f417f3ff1 upstream.

Macros SUN8I_CSC_CTRL() and SUN8I_CSC_COEFF() don't follow usual
recommendation of having arguments enclosed in parenthesis. While that
didn't change anything for quite sometime, it actually become important
after CSC code rework with commit ea067aee45a8 ("drm/sun4i: de2/de3:
Remove redundant CSC matrices").

Without this fix, colours are completely off for supported YVU formats
on SoCs with DE2 (A64, H3, R40, etc.).

Fix the issue by enclosing macro arguments in parenthesis.

Cc: stable@vger.kernel.org # 5.12+
Fixes: 883029390550 ("drm/sun4i: Add DE2 CSC library")
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831184819.93670-1-jernej.skrabec@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/85xx: fix timebase sync issue when CONFIG_HOTPLUG_CPU=n

commit c45361abb9185b1e172bd75eff51ad5f601ccae4 upstream.

When CONFIG_SMP=y, timebase synchronization is required when the second
kernel is started.

arch/powerpc/kernel/smp.c:
  int __cpu_up(unsigned int cpu, struct task_struct *tidle)
  {
   ...
   if (smp_ops->give_timebase)
   smp_ops->give_timebase();
   ...
  }

  void start_secondary(void *unused)
  {
   ...
   if (smp_ops->take_timebase)
   smp_ops->take_timebase();
   ...
  }

When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n,
 smp_85xx_ops.give_timebase is NULL,
 smp_85xx_ops.take_timebase is NULL,
As a result, the timebase is not synchronized.

Timebase  synchronization does not depend on CONFIG_HOTPLUG_CPU.

Fixes: 56f1ba280719 ("powerpc/mpc85xx: refactor the PM operations")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210929033646.39630-3-nixiaoming@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/pseries/mobility: ignore ibm, platform-facilities updates

commit 319fa1a52e438a6e028329187783a25ad498c4e6 upstream.

On VMs with NX encryption, compression, and/or RNG offload, these
capabilities are described by nodes in the ibm,platform-facilities device
tree hierarchy:

  $ tree -d /sys/firmware/devicetree/base/ibm,platform-facilities/
  /sys/firmware/devicetree/base/ibm,platform-facilities/
  ├── ibm,compression-v1
  ├── ibm,random-v1
  └── ibm,sym-encryption-v1

  3 directories

The acceleration functions that these nodes describe are not disrupted by
live migration, not even temporarily.

But the post-migration ibm,update-nodes sequence firmware always sends
"delete" messages for this hierarchy, followed by an "add" directive to
reconstruct it via ibm,configure-connector (log with debugging statements
enabled in mobility.c):

  mobility: removing node /ibm,platform-facilities/ibm,random-v1:4294967285
  mobility: removing node /ibm,platform-facilities/ibm,compression-v1:4294967284
  mobility: removing node /ibm,platform-facilities/ibm,sym-encryption-v1:4294967283
  mobility: removing node /ibm,platform-facilities:4294967286
  ...
  mobility: added node /ibm,platform-facilities:4294967286

Note we receive a single "add" message for the entire hierarchy, and what
we receive from the ibm,configure-connector sequence is the top-level
platform-facilities node along with its three children. The debug message
simply reports the parent node and not the whole subtree.

Also, significantly, the nodes added are almost completely equivalent to
the ones removed; even phandles are unchanged. ibm,shared-interrupt-pool in
the leaf nodes is the only property I've observed to differ, and Linux does
not use that. So in practice, the sum of update messages Linux receives for
this hierarchy is equivalent to minor property updates.

We succeed in removing the original hierarchy from the device tree. But the
vio bus code is ignorant of this, and does not unbind or relinquish its
references. The leaf nodes, still reachable through sysfs, of course still
refer to the now-freed ibm,platform-facilities parent node, which makes
use-after-free possible:

  refcount_t: addition on 0; use-after-free.
  WARNING: CPU: 3 PID: 1706 at lib/refcount.c:25 refcount_warn_saturate+0x164/0x1f0
  refcount_warn_saturate+0x160/0x1f0 (unreliable)
  kobject_get+0xf0/0x100
  of_node_get+0x30/0x50
  of_get_parent+0x50/0xb0
  of_fwnode_get_parent+0x54/0x90
  fwnode_count_parents+0x50/0x150
  fwnode_full_name_string+0x30/0x110
  device_node_string+0x49c/0x790
  vsnprintf+0x1c0/0x4c0
  sprintf+0x44/0x60
  devspec_show+0x34/0x50
  dev_attr_show+0x40/0xa0
  sysfs_kf_seq_show+0xbc/0x200
  kernfs_seq_show+0x44/0x60
  seq_read_iter+0x2a4/0x740
  kernfs_fop_read_iter+0x254/0x2e0
  new_sync_read+0x120/0x190
  vfs_read+0x1d0/0x240

Moreover, the "new" replacement subtree is not correctly added to the
device tree, resulting in ibm,platform-facilities parent node without the
appropriate leaf nodes, and broken symlinks in the sysfs device hierarchy:

  $ tree -d /sys/firmware/devicetree/base/ibm,platform-facilities/
  /sys/firmware/devicetree/base/ibm,platform-facilities/

  0 directories

  $ cd /sys/devices/vio ; find . -xtype l -exec file {} +
  ./ibm,sym-encryption-v1/of_node: broken symbolic link to
    ../../../firmware/devicetree/base/ibm,platform-facilities/ibm,sym-encryption-v1
  ./ibm,random-v1/of_node:         broken symbolic link to
    ../../../firmware/devicetree/base/ibm,platform-facilities/ibm,random-v1
  ./ibm,compression-v1/of_node:    broken symbolic link to
    ../../../firmware/devicetree/base/ibm,platform-facilities/ibm,compression-v1

This is because add_dt_node() -> dlpar_attach_node() attaches only the
parent node returned from configure-connector, ignoring any children. This
should be corrected for the general case, but fixing that won't help with
the stale OF node references, which is the more urgent problem.

One way to address that would be to make the drivers respond to node
removal notifications, so that node references can be dropped
appropriately. But this would likely force the drivers to disrupt active
clients for no useful purpose: equivalent nodes are immediately re-added.
And recall that the acceleration capabilities described by the nodes remain
available throughout the whole process.

The solution I believe to be robust for this situation is to convert
remove+add of a node with an unchanged phandle to an update of the node's
properties in the Linux device tree structure. That would involve changing
and adding a fair amount of code, and may take several iterations to land.

Until that can be realized we have a confirmed use-after-free and the
possibility of memory corruption. So add a limited workaround that
discriminates on the node type, ignoring adds and removes. This should be
amenable to backporting in the meantime.

Fixes: 410bccf97881 ("powerpc/pseries: Partition migration in the kernel")
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020194703.2613093-1-nathanl@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s/interrupt: Fix check_return_regs_valid() false positive

commit 4a5cb51f3db4be547225a4bce7a43d41b231382b upstream.

The check_return_regs_valid() can cause a false positive if the return
regs are marked as norestart and they are an HSRR type interrupt,
because the low bit in the bottom of regs->trap causes interrupt type
matching to fail.

This can occcur for example on bare metal with a HV privileged doorbell
interrupt that causes a signal, but do_signal returns early because
get_signal() fails, and takes the "No signal to deliver" path. In this
case no signal was delivered so the return location is not changed so
return SRRs are not invalidated, yet set_trap_norestart is called, which
messes up the match. Building go-1.16.6 is known to reproduce this.

Fix it by using the TRAP() accessor which masks out the low bit.

Fixes: 6eaaf9de3599 ("powerpc/64s/interrupt: Check and fix srr_valid without crashing")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211026122531.3599918-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/security: Use a mutex for interrupt exit code patching

commit 3c12b4df8d5e026345a19886ae375b3ebc33c0b6 upstream.

The mitigation-patching.sh script in the powerpc selftests toggles
all mitigations on and off simultaneously, revealing that rfi_flush
and stf_barrier cannot safely operate at the same time due to races
in updating the static key.

On some systems, the static key code throws a warning and the kernel
remains functional.  On others, the kernel will hang or crash.

Fix this by slapping on a mutex.

Fixes: 13799748b957 ("powerpc/64: use interrupt restart table to speed up return from interrupt")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Russell Currey <ruscur@russell.cc>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211027072410.40950-1-ruscur@russell.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv/prd: Unregister OPAL_MSG_PRD2 notifier during module unload

commit 52862ab33c5d97490f3fa345d6529829e6d6637b upstream.

Commit 587164cd, introduced new opal message type (OPAL_MSG_PRD2) and
added opal notifier. But I missed to unregister the notifier during
module unload path. This results in below call trace if you try to
unload and load opal_prd module.

Also add new notifier_block for OPAL_MSG_PRD2 message.

Sample calltrace (modprobe -r opal_prd; modprobe opal_prd)
  BUG: Unable to handle kernel data access on read at 0xc0080000192200e0
  Faulting instruction address: 0xc00000000018d1cc
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
  CPU: 66 PID: 7446 Comm: modprobe Kdump: loaded Tainted: G            E     5.14.0prd #759
  NIP:  c00000000018d1cc LR: c00000000018d2a8 CTR: c0000000000cde10
  REGS: c0000003c4c0f0a0 TRAP: 0300   Tainted: G            E      (5.14.0prd)
  MSR:  9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE>  CR: 24224824  XER: 20040000
  CFAR: c00000000018d2a4 DAR: c0080000192200e0 DSISR: 40000000 IRQMASK: 1
  ...
  NIP notifier_chain_register+0x2c/0xc0
  LR  atomic_notifier_chain_register+0x48/0x80
  Call Trace:
    0xc000000002090610 (unreliable)
    atomic_notifier_chain_register+0x58/0x80
    opal_message_notifier_register+0x7c/0x1e0
    opal_prd_probe+0x84/0x150 [opal_prd]
    platform_probe+0x78/0x130
    really_probe+0x110/0x5d0
    __driver_probe_device+0x17c/0x230
    driver_probe_device+0x60/0x130
    __driver_attach+0xfc/0x220
    bus_for_each_dev+0xa8/0x130
    driver_attach+0x34/0x50
    bus_add_driver+0x1b0/0x300
    driver_register+0x98/0x1a0
    __platform_driver_register+0x38/0x50
    opal_prd_driver_init+0x34/0x50 [opal_prd]
    do_one_initcall+0x60/0x2d0
    do_init_module+0x7c/0x320
    load_module+0x3394/0x3650
    __do_sys_finit_module+0xd4/0x160
    system_call_exception+0x140/0x290
    system_call_common+0xf4/0x258

Fixes: 587164cd593c ("powerpc/powernv: Add new opal message type")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211028165716.41300-1-hegdevasant@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/32e: Ignore ESR in instruction storage interrupt handler

commit 81291383ffde08b23bce75e7d6b2575ce9d3475c upstream.

A e5500 machine running a 32-bit kernel sometimes hangs at boot,
seemingly going into an infinite loop of instruction storage interrupts.

The ESR (Exception Syndrome Register) has a value of 0x800000 (store)
when this happens, which is likely set by a previous store. An
instruction TLB miss interrupt would then leave ESR unchanged, and if no
PTE exists it calls directly to the instruction storage interrupt
handler without changing ESR.

access_error() does not cause a segfault due to a store to a read-only
vma because is_exec is true. Most subsequent fault handling does not
check for a write fault on a read-only vma, and might do strange things
like create a writeable PTE or call page_mkwrite on a read only vma or
file. It's not clear what happens here to cause the infinite faulting in
this case, a fault handler failure or low level PTE or TLB handling.

In any case this can be fixed by having the instruction storage
interrupt zero regs->dsisr rather than storing the ESR value to it.

Fixes: a01a3f2ddbcd ("powerpc: remove arguments from fault handler functions")
Cc: stable@vger.kernel.org # v5.12+
Reported-by: Jacques de Laval <jacques.delaval@protonmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Jacques de Laval <jacques.delaval@protonmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211028133043.4159501-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/bpf: Fix write protecting JIT code

commit 44a8214de96bafb5210e43bfa2c97c19bf75af3d upstream.

Running program with bpf-to-bpf function calls results in data access
exception (0x300) with the below call trace:

  bpf_int_jit_compile+0x238/0x750 (unreliable)
  bpf_check+0x2008/0x2710
  bpf_prog_load+0xb00/0x13a0
  __sys_bpf+0x6f4/0x27c0
  sys_bpf+0x2c/0x40
  system_call_exception+0x164/0x330
  system_call_vectored_common+0xe8/0x278

as bpf_int_jit_compile() tries writing to write protected JIT code
location during the extra pass.

Fix it by holding off write protection of JIT code until the extra
pass, where branch target addresses fixup happens.

Fixes: 62e3d4210ac9 ("powerpc/bpf: Write protect JIT code")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211025055649.114728-1-hbathini@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/vas: Fix potential NULL pointer dereference

commit 61cb9ac66b30374c7fd8a8b2a3c4f8f432c72e36 upstream.

(!ptr && !ptr->foo) strikes again. :)

The expression (!ptr && !ptr->foo) is bogus and in case ptr is NULL,
it leads to a NULL pointer dereference: ptr->foo.

Fix this by converting && to ||

This issue was detected with the help of Coccinelle, and audited and
fixed manually.

Fixes: 1a0d0d5ed5e3 ("powerpc/vas: Add platform specific user window operations")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015050345.GA1161918@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: au1550nd: Keep the driver compatible with on-die ECC engines

commit 7e3cdba176ba59eaf4d463d273da0718e3626140 upstream.

Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.

It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.

There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)

As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.

Fixes: dbffc8ccdf3a ("mtd: rawnand: au1550: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-3-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: plat_nand: Keep the driver compatible with on-die ECC engines

commit 325fd539fc84f0aaa0ceb9d7d3b8718582473dc5 upstream.

Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.

It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.

There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)

As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.

Fixes: 612e048e6aab ("mtd: rawnand: plat_nand: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-8-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: orion: Keep the driver compatible with on-die ECC engines

commit 194ac63de6ff56d30c48e3ac19c8a412f9c1408e upstream.

Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.

It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.

There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)

As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.

Fixes: 553508cec2e8 ("mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-6-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: pasemi: Keep the driver compatible with on-die ECC engines

commit f16b7d2a5e810fcf4b15d096246d0d445da9cc88 upstream.

Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.

It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.

There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)

As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.

Fixes: 8fc6f1f042b2 ("mtd: rawnand: pasemi: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-7-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>