Daniel Mack [Wed, 11 Nov 2015 15:03:05 +0000 (16:03 +0100)]
Merge pull request #1843 from teg/ndisc
ndisc and dhcpv6
Tom Gundersen [Tue, 10 Nov 2015 20:45:41 +0000 (21:45 +0100)]
networkd: improve logging
Tom Gundersen [Tue, 10 Nov 2015 20:30:59 +0000 (21:30 +0100)]
networkd: link - track state of IPv6LL address
This is managed by the kernel, but we should track whether or not we have
a configured IPv6LL address. This fixes two issues:
- we now wait for IPv6LL before considering the link ready
- we now wait for IPv6LL before attempting to do NDisc or DHCPv6
these protocols relies on an LL address being available.
Tom Gundersen [Tue, 3 Nov 2015 12:02:16 +0000 (13:02 +0100)]
networkd: ndisc - handle router advertisement in userspace
Router Discovery is a core part of IPv6, which by default is handled by the kernel.
However, the kernel implementation is meant as a fall-back, and to fully support
the protocol a userspace implementation is desired.
The protocol essentially listens for Router Advertisement packets from routers
on the local link and use these to configure the client automatically. The four
main pieces of information are: what kind (if any) of DHCPv6 configuration should
be performed; a default gateway; the prefixes that should be considered to be on
the local link; and the prefixes with which we can preform SLAAC in order to pick
a global IPv6 address.
A lot of additional information is also available, which we do not yet fully
support, but which will eventually allow us to avoid the need for DHCPv6 in the
common case.
Short-term, the reason for wanting this is in userspace was the desire to fully
track all the addresses on links we manage, and that is not possible for addresses
managed by the kernel (as the kernel does not expose to us the fact that it
manages these addresses). Moreover, we would like to support stable privacy
addresses, which will soon be mandated and the legacy MAC-based global addresses
deprecated, to do this well we need to handle the generation in userspace. Lastly,
more long-term we wish to support more RA options than what the kernel exposes.
Tom Gundersen [Sun, 18 Oct 2015 16:25:58 +0000 (18:25 +0200)]
networkd: IPv6 router discovery - follow IPv6AcceptRouterAdvertisemnt=
The previous behavior:
When DHCPv6 was enabled, router discover was performed first, and then DHCPv6 was
enabled only if the relevant flags were passed in the Router Advertisement message.
Moreover, router discovery was performed even if AcceptRouterAdvertisements=false,
moreover, even if router advertisements were accepted (by the kernel) the flags
indicating that DHCPv6 should be performed were ignored.
New behavior:
If RouterAdvertisements are accepted, and either no routers are found, or an
advertisement is received indicating DHCPv6 should be performed, the DHCPv6
client is started. Moreover, the DHCP option now truly enables the DHCPv6
client regardless of router discovery (though it will probably not be
very useful to get a lease withotu any routes, this seems the more consistent
approach).
The recommended default setting should be to set DHCP=ipv4 and to leave
IPv6AcceptRouterAdvertisements unset.
Tom Gundersen [Tue, 10 Nov 2015 14:43:52 +0000 (15:43 +0100)]
networkd: dhcp6 - split up configure() method
Enabling address acquisition, configuring the client and starting the client are now
split out. This to better handle the client being repeatedly enabled due to router
advertisements.
Tom Gundersen [Mon, 19 Oct 2015 20:15:50 +0000 (22:15 +0200)]
sd-ndisc: introduce separate callbacks
As the data passed is very different, we introduce four different callbacks:
- Generic - router discovery timed out or state machine stopped
- Router - router and link configuration received
- Prefix onlink - configuration for an onlink prefix received
- Prefix autonomous - configuration for to configure a SLAAC address for a prefix received
Tom Gundersen [Thu, 22 Oct 2015 15:46:35 +0000 (17:46 +0200)]
sd-ndisc: notify user on STOP
Also, stop the state machine when we get into a broken state, rather than just notify the user.
Tom Gundersen [Tue, 3 Nov 2015 14:25:10 +0000 (15:25 +0100)]
sd-netlink: add support for RTA_PREF
Tom Gundersen [Wed, 11 Nov 2015 14:17:29 +0000 (15:17 +0100)]
sd-netlink: types - let tables be sized implicitly
This way we do not rely on the size MAX* constants from the kernel headers, as these will
be out-of-sync in case we have old headers and new defines in missing.h.
Tom Gundersen [Tue, 3 Nov 2015 14:11:38 +0000 (15:11 +0100)]
sd-netlink: add sd_rtnl_message_route_{s,g}et_flags()
Tom Gundersen [Tue, 10 Nov 2015 14:41:30 +0000 (15:41 +0100)]
sd-dhcp6-client: add is_running() method
Tom Gundersen [Tue, 10 Nov 2015 12:52:34 +0000 (13:52 +0100)]
networkd: address - drop the 'added' flag
Instead instantiate the kernel flags to TENTATIVE until the kernel
updates us with the real value.
Tom Gundersen [Tue, 3 Nov 2015 12:01:43 +0000 (13:01 +0100)]
networkd: dhcp4 - style fixes
Tom Gundersen [Wed, 11 Nov 2015 13:54:58 +0000 (14:54 +0100)]
Merge pull request #1848 from poettering/journal-sync
add journalctl --sync command and other stuff
Lennart Poettering [Wed, 11 Nov 2015 13:35:37 +0000 (14:35 +0100)]
systemctl: make sure list-jobs doesn't return failure on success
Lennart Poettering [Wed, 11 Nov 2015 13:32:26 +0000 (14:32 +0100)]
update TODO
Lennart Poettering [Wed, 11 Nov 2015 12:56:54 +0000 (13:56 +0100)]
journalctl: make --rotate synchronous, too
Of course, ideally we'd just use normal synchronous bus calls, but this
is out of the question as long as we rely on dbus-daemon (which logs to
journald, and thus cannot use to avoid cyclic sync loops). Hence,
instead, reuse the wait logic already implemented for --sync, and use a
signal in one direction, and a mtime watch file for the reply.
Lennart Poettering [Wed, 11 Nov 2015 11:59:09 +0000 (12:59 +0100)]
journalctl: add new --sync switch for syncing the journal to disk
With this new "--sync" switch we add a synchronous way to sync
everything queued to disk, and return only after that's complete. This
command gives the guarantee that anything queued before has hit the disk
before the command returns.
While we are at it, also improve the man pages and help text for
journalctl a bit.
Lennart Poettering [Wed, 11 Nov 2015 11:57:40 +0000 (12:57 +0100)]
systemctl: add a comment that clarifies why we do "return r" at the end of main()
To avoid confusion as outlined in #1845.
Lennart Poettering [Wed, 11 Nov 2015 11:55:32 +0000 (12:55 +0100)]
sd-bus: don't try to acquire connection selinux label unless selinux is actually enabled
Otherwise we might end up mistaking a SMACK label for an selinux label.
Also, fixes unexpect debug messages:
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034913.html
Daniel Mack [Wed, 11 Nov 2015 11:12:33 +0000 (12:12 +0100)]
Merge pull request #1846 from marcosfrm/journalctl-shell-completion
shell-completion: journalctl: add -S and -U options
Tom Gundersen [Wed, 11 Nov 2015 11:10:19 +0000 (12:10 +0100)]
Merge pull request #1845 from poettering/revert-EXIT_SUCCESS
Revert "systemctl: return EXIT_SUCCESS on success"
Marcos Mello [Wed, 11 Nov 2015 10:29:46 +0000 (08:29 -0200)]
shell-completion: journalctl: add -S and -U options
Added by 66f5292
Lennart Poettering [Wed, 11 Nov 2015 09:59:11 +0000 (10:59 +0100)]
Revert "systemctl: return EXIT_SUCCESS on success"
This reverts commit
6a32563caa883bd11da1b255c38358e481c42ad7.
Daniel Mack [Wed, 11 Nov 2015 09:48:39 +0000 (10:48 +0100)]
Merge pull request #1844 from martinpitt/master
test-parse-util: cover negative numbers, leading spaces, and more range errors
Martin Pitt [Wed, 11 Nov 2015 09:05:00 +0000 (10:05 +0100)]
test-parse-util: cover negative numbers, leading spaces, and more range errors
Motivated by https://github.com/systemd/systemd/issues/1829 where negative
numbers were mis-handled on 32 bit platforms by safe_atou*().
Tom Gundersen [Wed, 11 Nov 2015 01:31:29 +0000 (02:31 +0100)]
Merge pull request #1837 from poettering/grabbag2
variety of fixes
Tom Gundersen [Wed, 11 Nov 2015 01:25:57 +0000 (02:25 +0100)]
Merge pull request #1839 from evverx/fix-systemctl-cancel
systemctl: fix cancel
Tom Gundersen [Wed, 11 Nov 2015 01:24:45 +0000 (02:24 +0100)]
Merge pull request #1841 from keszybz/remove-snapshot
Remove snapshot unit type
Tom Gundersen [Wed, 11 Nov 2015 01:22:11 +0000 (02:22 +0100)]
Merge pull request #1655 from ssahani/net
network: port to extract_first_word
Tom Gundersen [Wed, 11 Nov 2015 01:21:06 +0000 (02:21 +0100)]
Merge pull request #1838 from keszybz/trivialities
Trivialities
Evgeny Vereshchagin [Wed, 11 Nov 2015 01:17:13 +0000 (01:17 +0000)]
systemctl: return EXIT_SUCCESS on success
Zbigniew Jędrzejewski-Szmek [Sun, 8 Nov 2015 13:12:54 +0000 (14:12 +0100)]
Remove snapshot unit type
Snapshots were never useful or used for anything. Many systemd
developers that I spoke to at systemd.conf2015, didn't even know they
existed, so it is fairly safe to assume that this type can be deleted
without harm.
The fundamental problem with snapshots is that the state of the system
is dynamic, devices come and go, users log in and out, timers fire...
and restoring all units to some state from the past would "undo"
those changes, which isn't really possible.
Tested by creating a snapshot, running the new binary, and checking
that the transition did not cause errors, and the snapshot is gone,
and snapshots cannot be created anymore.
New systemctl says:
Unknown operation snapshot.
Old systemctl says:
Failed to create snapshot: Support for snapshots has been removed.
IgnoreOnSnaphost settings are warned about and ignored:
Support for option IgnoreOnSnapshot= has been removed and it is ignored
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034872.html
Evgeny Vereshchagin [Wed, 11 Nov 2015 00:03:24 +0000 (00:03 +0000)]
systemctl: fix cancel
http://www.freedesktop.org/software/systemd/man/systemctl.html#cancel%20JOB...
> If no job ID is specified, cancel all pending jobs
Zbigniew Jędrzejewski-Szmek [Tue, 10 Nov 2015 16:36:11 +0000 (11:36 -0500)]
TODO: remove SYSTEMD_PAGER
This is already done in Fedora rawhide.
Zbigniew Jędrzejewski-Szmek [Tue, 10 Nov 2015 23:48:59 +0000 (18:48 -0500)]
man: normalize indentation in sd-detect-virt(1)
Lennart Poettering [Tue, 10 Nov 2015 20:39:52 +0000 (21:39 +0100)]
tmpfiles: don't consider it a problem if quota is not enabled on btrfs
If quota is not enabled on a btrfs file system, accept that, and only
log a debug message, but do not consider this a reason for failure.
Fixes: #1809
Lennart Poettering [Tue, 10 Nov 2015 20:37:49 +0000 (21:37 +0100)]
btrfs: when querying quota, make sure we don't choke if quota is disabled
When quota is disabled there's no quota tree on the fs, which results in
the SEARCH ioctl to return ENOENT. Handle this nicely: treat this the
same way as the case where the quota tree is around but doesn't carry
the searched for fields.
Lennart Poettering [Tue, 10 Nov 2015 20:04:39 +0000 (21:04 +0100)]
journald: be less picky when receiving epoll events
The event might be flagged with stuff we don't expect, hence don't
be needlessly picky, just rely on the kernel passing us sensible events.
Lennart Poettering [Tue, 10 Nov 2015 19:42:58 +0000 (20:42 +0100)]
core: change type of distribute_fds() prototype to return void
We can't handle errors of thisc all sanely anyway, and we never actually
return any errors from the unit type that implements the call. Hence,
let's make this void, in order to simplify things.
Lennart Poettering [Tue, 10 Nov 2015 19:38:30 +0000 (20:38 +0100)]
core: try to continue if coldplugging of a unit fails
Lennart Poettering [Tue, 10 Nov 2015 19:36:37 +0000 (20:36 +0100)]
core: change return value of the unit's enumerate() call to void
We cannot handle enumeration failures in a sensible way, hence let's try
hard to continue without making such failures fatal, and log about it
with precise error messages.
Lennart Poettering [Tue, 10 Nov 2015 19:08:04 +0000 (20:08 +0100)]
journald: never accept fds from file systems with mandatory locking enabled
This is pretty much a work-around for a security vulnerability in
kernels that allow unprivileged user namespaces.
Fixes #1822.
Daniel Mack [Tue, 10 Nov 2015 20:01:35 +0000 (21:01 +0100)]
Merge pull request #1835 from poettering/grabbag-of-stuff
Lots of small fixes
Lennart Poettering [Tue, 10 Nov 2015 18:55:30 +0000 (19:55 +0100)]
Merge pull request #1785 from ssahani/word
core: unit deps port to extract_first_word
Lennart Poettering [Tue, 10 Nov 2015 18:49:51 +0000 (19:49 +0100)]
Merge pull request #1834 from filbranden/testexecute2
test-execute: Fix systemd escaping and shell issues (v2)
Lennart Poettering [Tue, 10 Nov 2015 18:43:09 +0000 (19:43 +0100)]
Merge pull request #1793 from filbranden/extract1
More refactorings in extract_first_word
Lennart Poettering [Tue, 10 Nov 2015 18:33:27 +0000 (19:33 +0100)]
Merge pull request #1783 from vcaputo/still_make_progress_when_throttling
core: still make progress when throttling the manager loop
Lennart Poettering [Tue, 10 Nov 2015 18:31:22 +0000 (19:31 +0100)]
Merge pull request #1812 from evverx/test-fixes
tests: various fixes
Evgeny Vereshchagin [Sun, 8 Nov 2015 22:00:34 +0000 (22:00 +0000)]
tests: various fixes
* remove journal flushing (systemd-journal-flush.service runs journalctl --flush on boot)
* use sh -c and PATH instead of @SYSTEMCTL@ expansion
* remove unnecessary semicolons etc
Susant Sahani [Thu, 5 Nov 2015 05:26:13 +0000 (10:56 +0530)]
core: unit deps port to extract_first_word
Susant Sahani [Mon, 26 Oct 2015 04:27:38 +0000 (09:57 +0530)]
networkctl: lldp port to extract_first_word
Susant Sahani [Fri, 23 Oct 2015 16:36:42 +0000 (22:06 +0530)]
bond: port to extract_first_word
Lennart Poettering [Tue, 10 Nov 2015 16:46:28 +0000 (17:46 +0100)]
Merge pull request #1823 from whot/hwdb-updates
Updated axis ranges/resolutions for Lenovo T510 and Dell Inspiron N5040
Lennart Poettering [Tue, 10 Nov 2015 16:36:10 +0000 (17:36 +0100)]
update TODO
Lennart Poettering [Tue, 10 Nov 2015 16:27:16 +0000 (17:27 +0100)]
parse-util: really refuse parsing negative values as positive ones, even on x86-32
strtoull() doesn't make it particularly easy to detect passed-in
negative numbers, as it silently converts them to positive ones without
generating any error. Since we are not interested in negative values we
should hence explicitly filter them out by looking at the string
directly and returning ERANGE if we see a leading "-".
Fixes: #1829
Lennart Poettering [Tue, 10 Nov 2015 15:53:00 +0000 (16:53 +0100)]
journald: dispatch SIGTERM/SIGINT with a low priority
Let's make sure to process all queued log data before exiting, so that
we don't unnecessary lose messages when shutting down.
https://github.com/systemd/systemd/pull/1812#issuecomment-
155149871
Lennart Poettering [Tue, 10 Nov 2015 15:52:52 +0000 (16:52 +0100)]
core: accept time units for time-based resource limits
Let's make sure "LimitCPU=30min" can be parsed properly, following the
usual logic how we parse time values. Similar for LimitRTTIME=.
While we are at it, extend a bit on the man page section about resource
limits.
Fixes: #1772
Lennart Poettering [Tue, 10 Nov 2015 15:10:24 +0000 (16:10 +0100)]
core: when parsing resource limits, be more careful with types and corner cases
Let's not convert RLIM_INFINITY to "unsigned long long" and then back to
rlim_t, but let's leave it in the right type right-away.
Parse resource limits as 64 bit in all cases, as according to the man
page that's what libc does anyway.
Make sure setting a resource limit to (uint64_t) -1 results in a parsing
error, and isn't implicitly converted to RLIM_INFINITY.
Lennart Poettering [Tue, 10 Nov 2015 15:08:03 +0000 (16:08 +0100)]
core: simplify parsing of capability bounding set settings
Let's generate a simple error, and that's it. Let's not try to be smart
and record the last word that failed.
Also, let's make sure we don't compare numeric values with 0 by relying
on C's downgrade-to-bool feature, as suggested in CODING_STYLE.
Lennart Poettering [Tue, 10 Nov 2015 15:04:37 +0000 (16:04 +0100)]
time-util: add parse_time(), which is like parse_sec() but allows specification of default time unit if none is specified
This is useful if we want to parse RLIMIT_RTTIME values where the common
UNIX syntax is without any units but refers to a non-second unit (µs in
this case), but where we want to allow specification of units.
Lennart Poettering [Tue, 10 Nov 2015 14:57:21 +0000 (15:57 +0100)]
defs: rework CONF_DIRS_NULSTR() macro
The macro is generically useful for putting together search paths, hence
let's make it truly generic, by dropping the implicit ".d" appending it
does, and leave that to the caller. Also rename it from
CONF_DIRS_NULSTR() to CONF_PATHS_NULSTR(), since it's not strictly about
dirs that way, but any kind of file system path.
Also, mark CONF_DIR_SPLIT_USR() as internal macro by renaming it to
_CONF_PATHS_SPLIT_USR() so that the leading underscore indicates that
it's internal.
Lennart Poettering [Mon, 9 Nov 2015 23:37:19 +0000 (00:37 +0100)]
cgls: when showing root slice, put -.slice at top of tree
Lennart Poettering [Mon, 9 Nov 2015 23:36:57 +0000 (00:36 +0100)]
cgls: suppress output of controller name, if it's the systemd one
Lennart Poettering [Mon, 9 Nov 2015 22:47:29 +0000 (23:47 +0100)]
virt: make sure that we detect unknown container managers as VIRTUALIZATION_CONTAINER_OTHER
If we don't know a container manager, we should consider it as "other"
rather than as no container manager at all, to provide a somwhat useful
upgrade path.
Lennart Poettering [Mon, 9 Nov 2015 22:47:16 +0000 (23:47 +0100)]
CODING_STYLE: elaborate on usage of C99 fixed size integer types
Lennart Poettering [Mon, 9 Nov 2015 22:46:40 +0000 (23:46 +0100)]
man: fix reference to description of time span syntax
Filipe Brandenburger [Sun, 8 Nov 2015 18:19:45 +0000 (10:19 -0800)]
test-execute: Fix systemd escaping and shell issues
In most cases, systemd requires escaping $ (for systemd variable
substitution) and % (for specifiers) by doubling them. This was somewhat
of an issue in tests like exec-environment*.service where systemd was
doing the substitutions and we were not really checking that those were
available in the actual environment of the command. Fix that.
Expressions such as `exit $(test ...)` are incorrect. They only work
because $(test ...) will produce no output, so the command will become a
bare "exit" which will exit with the status of the latest executed
command which turns out to be the test... The direct approach is simply
calling "test" as the last command, for which the shell will propagate
the exit status.
One situation where this was breaking tests was on `exit $(test ...) &&
$(test ...) && $(test ...)` where the second and third tests were not
really executing, since the first command is actually `exit` so && was
doing nothing there. Fixed it by just using `test ... && test ... &&
test ...` as it was initially intended.
Pass -x to all shell executions for them to produce useful debugging
output to stderr. Consequently, removed most of the explicit `echo`s
that are no longer needed.
Mark all units as Type=oneshot explicitly.
Also made sure all shell variables are properly quoted.
v2: Added an explicit LC_ALL=C to ionice invocations since some locales
(such as French) will add a space before the colon in the output.
Tested by running `sudo ./test-execute` and confirming all tests enabled
on my system (essentially all of them except for the s390 one) passed.
Tweaked the variables or options or expected values and confirmed the
tests do indeed fail when the values are not exactly the expected ones.
v2: Also tested with `LANG=fr_FR.UTF-8 sudo ./test-execute` to confirm
it still works in a different locale.
Tom Gundersen [Tue, 10 Nov 2015 14:03:37 +0000 (15:03 +0100)]
Merge pull request #1825 from ssahani/ipv61-1
networkd: add support to configure IPv6 hop limit
Tom Gundersen [Tue, 10 Nov 2015 13:46:53 +0000 (14:46 +0100)]
Merge pull request #1827 from davidreynolds/use_extract_first_word
conf-parser: use extract_first_word
Tom Gundersen [Tue, 10 Nov 2015 13:46:02 +0000 (14:46 +0100)]
Merge pull request #1830 from jsynacek/journalctl-time
man/journalctl: mention systemd.time(7) where appropriate
Tom Gundersen [Tue, 10 Nov 2015 13:43:42 +0000 (14:43 +0100)]
Merge pull request #1831 from keszybz/todo-trimming
Todo trimming
Tom Gundersen [Tue, 10 Nov 2015 13:41:35 +0000 (14:41 +0100)]
Merge pull request #1735 from thom311/master
lldp: avoid compiler warnings in lldp_tfl_package_read* functions
Zbigniew Jędrzejewski-Szmek [Sun, 8 Nov 2015 14:15:07 +0000 (15:15 +0100)]
man: describe the reason why runlevels are obsolete
Put it at the top of the file, where it's hard to miss.
Also add the mapping of runlevel → target because since it is now
static.
I'm not adding runlevel(7), because we do not want to make obsolete
stuff even more prominent.
Zbigniew Jędrzejewski-Szmek [Sun, 8 Nov 2015 14:13:45 +0000 (15:13 +0100)]
man: tweak description of machinectl show
Also, machinectl status is anything but terse. Remove "terse".
Zbigniew Jędrzejewski-Szmek [Sun, 8 Nov 2015 14:13:24 +0000 (15:13 +0100)]
TODO: update for lz4/xz stuff
No point in fixing xz now that lz4 is the default.
Jan Synacek [Tue, 10 Nov 2015 12:05:48 +0000 (13:05 +0100)]
man/journalctl: mention systemd.time(7) where appropriate
Original bug report: https://bugzilla.redhat.com/show_bug.cgi?id=1182661
David Reynolds [Tue, 10 Nov 2015 07:45:26 +0000 (23:45 -0800)]
conf-parser: use extract_first_word
Peter Hutterer [Mon, 9 Nov 2015 06:30:54 +0000 (16:30 +1000)]
hwdb: add axis range corrections for Lenovo T510
From https://bugzilla.redhat.com/show_bug.cgi?id=1247958
Susant Sahani [Tue, 10 Nov 2015 03:59:24 +0000 (09:29 +0530)]
man: add man for IPV6 hop limit
Susant Sahani [Tue, 10 Nov 2015 03:56:38 +0000 (09:26 +0530)]
networkd: Add support to configure IPV6 hop limit
This patch adds support to configure IPV6 hop limit.
For example:
/proc/sys/net/ipv6/conf/wlp3s0/hop_limit
Peter Hutterer [Mon, 2 Nov 2015 21:35:43 +0000 (07:35 +1000)]
hwdb: add Dell Inspiron N5040 touchpad corrections
From https://bugzilla.redhat.com/show_bug.cgi?id=1275070
Peter Hutterer [Mon, 2 Nov 2015 21:32:35 +0000 (07:32 +1000)]
hwdb: sort the brand names alphabetically
Lennart Poettering [Tue, 10 Nov 2015 00:01:51 +0000 (01:01 +0100)]
Merge pull request #1790 from endocode/kayrus/fix_man_kernel_cl
Fixed kernel-command-line links
Tom Gundersen [Mon, 9 Nov 2015 22:36:59 +0000 (23:36 +0100)]
Merge pull request #1629 from ssahani/vxlan
networkd: vxlan add option to set FDB entries
Lennart Poettering [Mon, 9 Nov 2015 22:19:37 +0000 (23:19 +0100)]
Merge pull request #1821 from darkcircle/ko-catalog-translation
l10n: add a new Korean translation for the catalog
Daniel Mack [Mon, 9 Nov 2015 20:56:49 +0000 (21:56 +0100)]
Merge pull request #1820 from michich/errno-v2
[v2] treewide: treatment of errno and other cleanups
Seong-ho Cho [Mon, 9 Nov 2015 20:08:44 +0000 (05:08 +0900)]
add a new Korean translation for the catalog
Lennart Poettering [Mon, 9 Nov 2015 19:09:49 +0000 (20:09 +0100)]
Merge pull request #1762 from endocode/dongsu/l10n-ko-msgs
po: update Korean translation
Michal Schmidt [Thu, 5 Nov 2015 12:44:20 +0000 (13:44 +0100)]
treewide: apply errno.cocci
with small manual cleanups for style.
Michal Schmidt [Thu, 5 Nov 2015 12:44:18 +0000 (13:44 +0100)]
coccinelle: additional errno.cocci hunk
rewrites:
log_error_errno(errno, ...);
return -errno;
into:
return log_error_errno(errno, ...);
Michal Schmidt [Thu, 5 Nov 2015 12:44:17 +0000 (13:44 +0100)]
coccinelle: errno.cocci improvements
Apply to all log_*_errno loglevels.
Lennart Poettering [Mon, 9 Nov 2015 17:33:22 +0000 (18:33 +0100)]
Merge pull request #1798 from evverx/fix-test-udev
test-udev: small fixes
Lennart Poettering [Mon, 9 Nov 2015 17:16:21 +0000 (18:16 +0100)]
Merge pull request #1799 from jengelh/doc
doc: typo and ortho fixes
Lennart Poettering [Mon, 9 Nov 2015 16:30:58 +0000 (17:30 +0100)]
Merge pull request #1807 from michich/boot-timer
core/timer: in containers OnBootSec should count from container startup
Lennart Poettering [Mon, 9 Nov 2015 16:02:12 +0000 (17:02 +0100)]
Merge pull request #1794 from karelzak/size_limit
core: support IEC suffixes for RLIMIT stuff
Lennart Poettering [Mon, 9 Nov 2015 15:50:57 +0000 (16:50 +0100)]
Merge pull request #1817 from iaguis/nspawn-custom-service-3
nspawn: support custom container service name
Iago López Galeiras [Mon, 9 Nov 2015 13:37:43 +0000 (14:37 +0100)]
detect-virt: add rkt app container runtime
Iago López Galeiras [Mon, 9 Nov 2015 10:32:34 +0000 (11:32 +0100)]
nspawn: support custom container service name
We were hardcoding "systemd-nspawn" as the value of the $container env
variable and "nspawn" as the service string in machined registration.
This commit allows the user to configure it by setting the
$SYSTEMD_NSPAWN_CONTAINER_SERVICE env variable when calling
systemd-nspawn.
If $SYSTEMD_NSPAWN_CONTAINER_SERVICE is not set, we use the string
"systemd-nspawn" for both, fixing the previous inconsistency.