Russell King [Tue, 10 Apr 2018 10:35:36 +0000 (11:35 +0100)]
ARM: avoid Cortex-A9 livelock on tight dmb loops
[ Upstream commit
5388a5b82199facacd3d7ac0d05aca6e8f902fed ]
machine_crash_nonpanic_core() does this:
while (1)
cpu_relax();
because the kernel has crashed, and we have no known safe way to deal
with the CPU. So, we place the CPU into an infinite loop which we
expect it to never exit - at least not until the system as a whole is
reset by some method.
In the absence of erratum 754327, this code assembles to:
b .
In other words, an infinite loop. When erratum 754327 is enabled,
this becomes:
1: dmb
b 1b
It has been observed that on some systems (eg, OMAP4) where, if a
crash is triggered, the system tries to kexec into the panic kernel,
but fails after taking the secondary CPU down - placing it into one
of these loops. This causes the system to livelock, and the most
noticable effect is the system stops after issuing:
Loading crashdump kernel...
to the system console.
The tested as working solution I came up with was to add wfe() to
these infinite loops thusly:
while (1) {
cpu_relax();
wfe();
}
which, without 754327 builds to:
1: wfe
b 1b
or with 754327 is enabled:
1: dmb
wfe
b 1b
Adding "wfe" does two things depending on the environment we're running
under:
- where we're running on bare metal, and the processor implements
"wfe", it stops us spinning endlessly in a loop where we're never
going to do any useful work.
- if we're running in a VM, it allows the CPU to be given back to the
hypervisor and rescheduled for other purposes (maybe a different VM)
rather than wasting CPU cycles inside a crashed VM.
However, in light of erratum 794072, Will Deacon wanted to see 10 nops
as well - which is reasonable to cover the case where we have erratum
754327 enabled _and_ we have a processor that doesn't implement the
wfe hint.
So, we now end up with:
1: wfe
b 1b
when erratum 754327 is disabled, or:
1: dmb
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
wfe
b 1b
when erratum 754327 is enabled. We also get the dmb + 10 nop
sequence elsewhere in the kernel, in terminating loops.
This is reasonable - it means we get the workaround for erratum
794072 when erratum 754327 is enabled, but still relinquish the dead
processor - either by placing it in a lower power mode when wfe is
implemented as such or by returning it to the hypervisior, or in the
case where wfe is a no-op, we use the workaround specified in erratum
794072 to avoid the problem.
These as two entirely orthogonal problems - the 10 nops addresses
erratum 794072, and the wfe is an optimisation that makes the system
more efficient when crashed either in terms of power consumption or
by allowing the host/other VMs to make use of the CPU.
I don't see any reason not to use kexec() inside a VM - it has the
potential to provide automated recovery from a failure of the VMs
kernel with the opportunity for saving a crashdump of the failure.
A panic() with a reboot timeout won't do that, and reading the
libvirt documentation, setting on_reboot to "preserve" won't either
(the documentation states "The preserve action for an on_reboot event
is treated as a destroy".) Surely it has to be a good thing to
avoiding having CPUs spinning inside a VM that is doing no useful
work.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Murzin [Fri, 25 Jan 2019 14:18:37 +0000 (15:18 +0100)]
ARM: 8830/1: NOMMU: Toggle only bits in EXC_RETURN we are really care of
[ Upstream commit
72cd4064fccaae15ab84d40d4be23667402df4ed ]
ARMv8M introduces support for Security extension to M class, among
other things it affects exception handling, especially, encoding of
EXC_RETURN.
The new bits have been added:
Bit [6] Secure or Non-secure stack
Bit [5] Default callee register stacking
Bit [0] Exception Secure
which conflicts with hard-coded value of EXC_RETURN:
In fact, we only care of few bits:
Bit [3] Mode (0 - Handler, 1 - Thread)
Bit [2] Stack pointer selection (0 - Main, 1 - Process)
We can toggle only those bits and left other bits as they were on
exception entry.
It is basically, what patch does - saves EXC_RETURN when we do
transition form Thread to Handler mode (it is first svc), so later
saved value is used instead of EXC_RET_THREADMODE_PROCESSSTACK.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stanislaw Gruszka [Tue, 22 Jan 2019 12:47:54 +0000 (13:47 +0100)]
mt7601u: bump supported EEPROM version
[ Upstream commit
3bd1505fed71d834f45e87b32ff07157fdda47e0 ]
As reported by Michael eeprom 0d is supported and work with the driver.
Dump of /sys/kernel/debug/ieee80211/phy1/mt7601u/eeprom_param
with 0d EEPORM looks like this:
RSSI offset: 0 0
Reference temp: f9
LNA gain: 8
Reg channels: 1-14
Per rate power:
raw:05 bw20:05 bw40:05
raw:05 bw20:05 bw40:05
raw:03 bw20:03 bw40:03
raw:03 bw20:03 bw40:03
raw:04 bw20:04 bw40:04
raw:00 bw20:00 bw40:00
raw:00 bw20:00 bw40:00
raw:00 bw20:00 bw40:00
raw:02 bw20:02 bw40:02
raw:00 bw20:00 bw40:00
Per channel power:
tx_power ch1:09 ch2:09
tx_power ch3:0a ch4:0a
tx_power ch5:0a ch6:0a
tx_power ch7:0b ch8:0b
tx_power ch9:0b ch10:0b
tx_power ch11:0b ch12:0b
tx_power ch13:0b ch14:0b
Reported-and-tested-by: Michael <ZeroBeat@gmx.de>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey Khoroshilov [Fri, 7 Dec 2018 22:57:04 +0000 (01:57 +0300)]
soc: qcom: gsbi: Fix error handling in gsbi_probe()
[ Upstream commit
8cd09a3dd3e176c62da67efcd477a44a8d87185e ]
If of_platform_populate() fails in gsbi_probe(),
gsbi->hclk is left undisabled.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ard Biesheuvel [Sat, 2 Feb 2019 09:41:16 +0000 (10:41 +0100)]
efi/arm/arm64: Allow SetVirtualAddressMap() to be omitted
[ Upstream commit
4e46c2a956215482418d7b315749fb1b6c6bc224 ]
The UEFI spec revision 2.7 errata A section 8.4 has the following to
say about the virtual memory runtime services:
"This section contains function definitions for the virtual memory
support that may be optionally used by an operating system at runtime.
If an operating system chooses to make EFI runtime service calls in a
virtual addressing mode instead of the flat physical mode, then the
operating system must use the services in this section to switch the
EFI runtime services from flat physical addressing to virtual
addressing."
So it is pretty clear that calling SetVirtualAddressMap() is entirely
optional, and so there is no point in doing so unless it achieves
anything useful for us.
This is not the case for 64-bit ARM. The identity mapping used by the
firmware is arbitrarily converted into another permutation of userland
addresses (i.e., bits [63:48] cleared), and the runtime code could easily
deal with the original layout in exactly the same way as it deals with
the converted layout. However, due to constraints related to page size
differences if the OS is not running with 4k pages, and related to
systems that may expose the individual sections of PE/COFF runtime
modules as different memory regions, creating the virtual layout is a
bit fiddly, and requires us to sort the memory map and reason about
adjacent regions with identical memory types etc etc.
So the obvious fix is to stop calling SetVirtualAddressMap() altogether
on arm64 systems. However, to avoid surprises, which are notoriously
hard to diagnose when it comes to OS<->firmware interactions, let's
start by making it an opt-out feature, and implement support for the
'efi=novamap' kernel command line parameter on ARM and arm64 systems.
( Note that 32-bit ARM generally does require SetVirtualAddressMap() to be
used, given that the physical memory map and the kernel virtual address
map are not guaranteed to be non-overlapping like on arm64. However,
having support for efi=novamap,noruntime on 32-bit ARM, combined with
the recently proposed support for earlycon=efifb, is likely to be useful
to diagnose boot issues on such systems if they have no accessible serial
port. )
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190202094119.13230-8-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mathieu Malaterre [Fri, 15 Dec 2017 12:46:39 +0000 (13:46 +0100)]
ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notation
[ Upstream commit
3e3380d0675d5e20b0af067d60cb947a4348bf9b ]
Improve the DTS files by removing all the leading "0x" and zeros to fix
the following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +
For simplicity, two sed expressions were used to solve each warnings
separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit
4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
[vzapolskiy: fixed commit message to pass checkpatch.pl test]
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shayenne Moura [Wed, 30 Jan 2019 16:06:36 +0000 (14:06 -0200)]
drm/vkms: Bugfix extra vblank frame
[ Upstream commit
def35e7c592616bc09be328de8795e5e624a3cf8 ]
kms_flip tests are breaking on vkms when simulate vblank because vblank
event sequence count returns one extra frame after arm vblank event to
make a page flip.
When vblank interrupt happens, userspace processes the vblank event and
issues the next page flip command. Kernel calls queue_work to call
commit_planes and arm the new page flip. The next vblank picks up the
newly armed vblank event and vblank interrupt happens again.
The arm and vblank event are asynchronous, then, on the next vblank, we
receive x+2 from `get_vblank_timestamp`, instead x+1, although timestamp
and vblank seqno matches.
Function `get_vblank_timestamp` is reached by 2 ways:
- from `drm_mode_page_flip_ioctl`: driver is doing one atomic
operation to synchronize planes in the same output. There is no
vblank simulation, the `drm_crtc_arm_vblank_event` function adds 1
on vblank count, and the variable in_vblank_irq is false
- from `vkms_vblank_simulate`: since the driver is doing a vblank
simulation, the variable in_vblank_irq is true.
Fix this problem subtracting one vblank period from vblank_time when
`get_vblank_timestamp` is called from trace `drm_mode_page_flip_ioctl`,
i.e., is not a real vblank interrupt, and getting the timestamp and
vblank seqno when it is a real vblank interrupt.
The reason for all this is that get_vblank_timestamp always supplies the
timestamp for the next vblank event. The hrtimer is the vblank
simulator, and it needs the correct previous value to present the next
vblank. Since this is how hw timestamp registers work and what the
vblank core expects.
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/171e6e1c239cbca0c3df7183ed8acdfeeace9cf4.1548856186.git.shayenneluzmoura@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrea Parri [Mon, 21 Jan 2019 15:52:40 +0000 (16:52 +0100)]
sched/core: Use READ_ONCE()/WRITE_ONCE() in move_queued_task()/task_rq_lock()
[ Upstream commit
c546951d9c9300065bad253ecdf1ac59ce9d06c8 ]
move_queued_task() synchronizes with task_rq_lock() as follows:
move_queued_task() task_rq_lock()
[S] ->on_rq = MIGRATING [L] rq = task_rq()
WMB (__set_task_cpu()) ACQUIRE (rq->lock);
[S] ->cpu = new_cpu [L] ->on_rq
where "[L] rq = task_rq()" is ordered before "ACQUIRE (rq->lock)" by an
address dependency and, in turn, "ACQUIRE (rq->lock)" is ordered before
"[L] ->on_rq" by the ACQUIRE itself.
Use READ_ONCE() to load ->cpu in task_rq() (c.f., task_cpu()) to honor
this address dependency. Also, mark the accesses to ->cpu and ->on_rq
with READ_ONCE()/WRITE_ONCE() to comply with the LKMM.
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20190121155240.27173-1-andrea.parri@amarulasolutions.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ard Biesheuvel [Sat, 2 Feb 2019 09:41:12 +0000 (10:41 +0100)]
efi/memattr: Don't bail on zero VA if it equals the region's PA
[ Upstream commit
5de0fef0230f3c8d75cff450a71740a7bf2db866 ]
The EFI memory attributes code cross-references the EFI memory map with
the more granular EFI memory attributes table to ensure that they are in
sync before applying the strict permissions to the regions it describes.
Since we always install virtual mappings for the EFI runtime regions to
which these strict permissions apply, we currently perform a sanity check
on the EFI memory descriptor, and ensure that the EFI_MEMORY_RUNTIME bit
is set, and that the virtual address has been assigned.
However, in cases where a runtime region exists at physical address 0x0,
and the virtual mapping equals the physical mapping, e.g., when running
in mixed mode on x86, we encounter a memory descriptor with the runtime
attribute and virtual address 0x0, and incorrectly draw the conclusion
that a runtime region exists for which no virtual mapping was installed,
and give up altogether. The consequence of this is that firmware mappings
retain their read-write-execute permissions, making the system more
vulnerable to attacks.
So let's only bail if the virtual address of 0x0 has been assigned to a
physical region that does not reside at address 0x0.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes:
10f0d2f577053 ("efi: Implement generic support for the Memory ...")
Link: http://lkml.kernel.org/r/20190202094119.13230-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hidetoshi Seto [Tue, 29 Jan 2019 15:12:45 +0000 (10:12 -0500)]
sched/debug: Initialize sd_sysctl_cpus if !CONFIG_CPUMASK_OFFSTACK
[ Upstream commit
1ca4fa3ab604734e38e2a3000c9abf788512ffa7 ]
register_sched_domain_sysctl() copies the cpu_possible_mask into
sd_sysctl_cpus, but only if sd_sysctl_cpus hasn't already been
allocated (ie, CONFIG_CPUMASK_OFFSTACK is set). However, when
CONFIG_CPUMASK_OFFSTACK is not set, sd_sysctl_cpus is left
uninitialized (all zeroes) and the kernel may fail to initialize
sched_domain sysctl entries for all possible CPUs.
This is visible to the user if the kernel is booted with maxcpus=n, or
if ACPI tables have been modified to leave CPUs offline, and then
checking for missing /proc/sys/kernel/sched_domain/cpu* entries.
Fix this by separating the allocation and initialization, and adding a
flag to initialize the possible CPU entries while system booting only.
Tested-by: Syuuichirou Ishii <ishii.shuuichir@jp.fujitsu.com>
Tested-by: Tarumizu, Kohei <tarumizu.kohei@jp.fujitsu.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190129151245.5073-1-msys.mizuma@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wen yang [Sat, 2 Feb 2019 14:53:16 +0000 (14:53 +0000)]
ASoC: fsl-asoc-card: fix object reference leaks in fsl_asoc_card_probe
[ Upstream commit
11907e9d3533648615db08140e3045b829d2c141 ]
The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.
Signed-off-by: Wen Yang <yellowriver2010@hotmil.com>
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Tue, 11 Dec 2018 20:20:43 +0000 (21:20 +0100)]
iwlwifi: mvm: fix RFH config command with >=10 CPUs
[ Upstream commit
dbf592f3d14fb7d532cb7c820b1065cf33e02aaa ]
If we have >=10 (logical) CPUs, our command size exceeds the
internal buffer size and the command fails; fix that by using
IWL_HCMD_DFL_NOCOPY for the command that's allocated anyway.
While at it, also fix the leak of cmd, and use struct_size()
to calculate its size.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes:
8edbfaa19835 ("iwlwifi: mvm: configure multi RX queue")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Roese [Fri, 1 Feb 2019 10:17:09 +0000 (11:17 +0100)]
staging: spi: mt7621: Add return code check on device_reset()
[ Upstream commit
46c337872f34bc6387b0c29a4964f562c70139e3 ]
This patch adds a return code check on device_reset() and removes the
compile warning.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thierry Reding [Fri, 25 Jan 2019 13:11:42 +0000 (14:11 +0100)]
i2c: of: Try to find an I2C adapter matching the parent
[ Upstream commit
e814e688413aabd7b0d75e2a8ed1caa472951dec ]
If an I2C adapter doesn't match the provided device tree node, also try
matching the parent's device tree node. This allows finding an adapter
based on the device node of the parent device that was used to register
it.
This fixes a regression on Tegra124-based Chromebooks (Nyan) where the
eDP controller registers an I2C adapter that is used to read to EDID.
After commit
993a815dcbb2 ("dt-bindings: panel: Add missing .txt
suffix") this stopped working because the I2C adapter could no longer
be found. The approach in this patch fixes the regression without
introducing the issues that the above commit solved.
Fixes:
17ab7806de0c ("drm: don't link DP aux i2c adapter to the hardware device node")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Tristan Bastian <tristan-c.bastian@gmx.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rajneesh Bhardwaj [Fri, 1 Feb 2019 07:32:26 +0000 (13:02 +0530)]
platform/x86: intel_pmc_core: Fix PCH IP sts reading
[ Upstream commit
0e68eeea9894feeba2edf7ec63e4551b87f39621 ]
A previous commit "platform/x86: intel_pmc_core: Make the driver PCH
family agnostic <
c977b98bbef5898ed3d30b08ea67622e9e82082a>" provided
better abstraction to this driver but has some fundamental issues.
e.g. the following condition
for (index = 0; index < pmcdev->map->ppfear_buckets &&
index < PPFEAR_MAX_NUM_ENTRIES; index++, iter++)
is wrong because for CNL, PPFEAR_MAX_NUM_ENTRIES is hardcoded as 5 which
is _wrong_ and even though ppfear_buckets is 8, the loop fails to read
all eight registers needed for CNL PCH i.e. PPFEAR0 and PPFEAR1. This
patch refactors the pfear show logic to correctly read PCH IP power
gating status for Cannonlake and beyond.
Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes:
c977b98bbef5 ("platform/x86: intel_pmc_core: Make the driver PCH family agnostic")
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kai-Heng Feng [Tue, 11 Dec 2018 07:59:37 +0000 (15:59 +0800)]
e1000e: Exclude device from suspend direct complete optimization
[ Upstream commit
59f58708c5047289589cbf6ee95146b76cf57d1e ]
e1000e sets different WoL settings in system suspend callback and
runtime suspend callback.
The suspend direct complete optimization leaves e1000e in runtime
suspended state with wrong WoL setting during system suspend.
To fix this, we need to disable suspend direct complete optimization to
let e1000e always use suspend callback to set correct WoL during system
suspend.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konstantin Khlebnikov [Mon, 14 Jan 2019 13:29:30 +0000 (16:29 +0300)]
e1000e: fix cyclic resets at link up with active tx
[ Upstream commit
0f9e980bf5ee1a97e2e401c846b2af989eb21c61 ]
I'm seeing series of e1000e resets (sometimes endless) at system boot
if something generates tx traffic at this time. In my case this is
netconsole who sends message "e1000e 0000:02:00.0: Some CPU C-states
have been disabled in order to enable jumbo frames" from e1000e itself.
As result e1000_watchdog_task sees used tx buffer while carrier is off
and start this reset cycle again.
[ 17.794359] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 17.794714] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 22.936455] e1000e 0000:02:00.0 eth1: changing MTU from 1500 to 9000
[ 23.033336] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 26.102364] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 27.174495] 8021q: 802.1Q VLAN Support v1.8
[ 27.174513] 8021q: adding VLAN 0 to HW filter on device eth1
[ 30.671724] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[ 30.898564] netpoll: netconsole: local port 6666
[ 30.898566] netpoll: netconsole: local IPv6 address 2a02:6b8:0:80b:beae:c5ff:fe28:23f8
[ 30.898567] netpoll: netconsole: interface 'eth1'
[ 30.898568] netpoll: netconsole: remote port 6666
[ 30.898568] netpoll: netconsole: remote IPv6 address 2a02:6b8:b000:605c:e61d:2dff:fe03:3790
[ 30.898569] netpoll: netconsole: remote ethernet address b0:a8:6e:f4:ff:c0
[ 30.917747] console [netcon0] enabled
[ 30.917749] netconsole: network logging started
[ 31.453353] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.185730] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.321840] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.465822] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.597423] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.745417] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.877356] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.005441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.157376] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.289362] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.417441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 37.790342] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
This patch flushes tx buffers only once when carrier is off
rather than at each watchdog iteration.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mathieu Poirier [Thu, 31 Jan 2019 18:47:08 +0000 (11:47 -0700)]
perf/aux: Make perf_event accessible to setup_aux()
[ Upstream commit
840018668ce2d96783356204ff282d6c9b0e5f66 ]
When pmu::setup_aux() is called the coresight PMU needs to know which
sink to use for the session by looking up the information in the
event's attr::config2 field.
As such simply replace the cpu information by the complete perf_event
structure and change all affected customers.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/20190131184714.20388-2-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Kazlauskas [Wed, 23 Jan 2019 18:50:17 +0000 (13:50 -0500)]
drm/amd/display: Disconnect mpcc when changing tg
[ Upstream commit
77476360f173c127c191bfe8ca8113130ef283b8 ]
[Why]
This fixes an mpc programming error for the following sequence of
atomic commits when pipe split is enabled:
Commit 1: CRTC0 (plane 4, plane 3)
Pipe 0: old_plane_state = A0, new_plane_state = A1, new_tg = T0
Pipe 1: old_plane_state = B0, new_plane_state = B1, new_tg = T0
Pipe 2: old_plane_state = A0, new_plane_state = A1, new_tg = T0
Pipe 3: old_plane_state = B0, new_plane_state = B1, new_tg = T0
Commit 2: CRTC0 (plane 3), CRTC1 (plane 2)
Pipe 0: old_plane_state = A1, new_plane_state = A2, new_tg = T0
Pipe 1: old_plane_state = B1, new_plane_state = B2, new_tg = T1
Pipe 2: old_plane_state = A1, new_plane_state = NULL, new_tg = NULL
Pipe 3: old_plane_state = B1, new_plane_state = NULL, new_tg = NULL
In the second commit the assertion for mpcc in use is hit because
mpcc disconnect never occurs for pipe 1. This is because the stream
changes for pipe 1 and the opp_list is empty.
This sequence occurs when running the
"igt@kms_plane_multiple@atomic-pipe-A-tiling-none" test with two
displays connected.
[How]
Expand the reset condition to include:
"old_pipe_ctx->stream_res.tg != new_pipe_ctx->stream_res.tg"
...but only when the plane state is non-NULL for both old and new.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Kazlauskas [Wed, 23 Jan 2019 19:55:58 +0000 (14:55 -0500)]
drm/amd/display: Don't re-program planes for DPMS changes
[ Upstream commit
5062b797db4103218fa00ee254417b8ecaab7401 ]
[Why]
There are opt1c lock warnings and CRTC read timeouts when running the
"igt@kms_plane@plane-position-hole-dpms-pipe-*" tests. These are
caused by trying to reprogram planes that are not in the current
context.
DPMS off removes the stream from the context. In this case:
new_crtc_state->active_changed = true
new_crtc_state->mode_changed = false
The planes are reprogrammed before the stream is removed from the
context because stream_state->mode_changed = false.
For DPMS adds the stream and planes back to the context:
new_crtc_state->active_changed = true
new_crtc_state->mode_changed = false
The planes are also reprogrammed here before the stream is added to the
context because stream_state->mode_changed = true. They were not
previously in the current context so warnings occur here.
[How]
Set stream_state->mode_changed = true when
new_crtc_state->active_changed = true too.
This prevents reprogramming before the context is applied in DC. The
programming will be done after the context is applied.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Julia Lawall [Mon, 14 Jan 2019 16:44:56 +0000 (17:44 +0100)]
drm: rcar-du: add missing of_node_put
[ Upstream commit
4c6d8fc20b09f9684743afd72e4dbc3f15524479 ]
Add an of_node_put when the result of of_graph_get_remote_port_parent is
not available.
Add a second of_node_put if no encoder is selected (encoder remains NULL).
The semantic match that finds the first problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@r exists@
local idexpression e;
expression x;
@@
e = of_graph_get_remote_port_parent(...);
... when != x = e
when != true e == NULL
when != of_node_put(e)
when != of_fwnode_handle(e)
(
return e;
|
*return ...;
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guenter Roeck [Thu, 7 Feb 2019 05:13:49 +0000 (21:13 -0800)]
cdrom: Fix race condition in cdrom_sysctl_register
[ Upstream commit
f25191bb322dec8fa2979ecb8235643aa42470e1 ]
The following traceback is sometimes seen when booting an image in qemu:
[ 54.608293] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 54.611085] Fusion MPT base driver 3.04.20
[ 54.611877] Copyright (c) 1999-2008 LSI Corporation
[ 54.616234] Fusion MPT SAS Host driver 3.04.20
[ 54.635139] sysctl duplicate entry: /dev/cdrom//info
[ 54.639578] CPU: 0 PID: 266 Comm: kworker/u4:5 Not tainted 5.0.0-rc5 #1
[ 54.639578] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[ 54.641273] Workqueue: events_unbound async_run_entry_fn
[ 54.641273] Call Trace:
[ 54.641273] dump_stack+0x67/0x90
[ 54.641273] __register_sysctl_table+0x50b/0x570
[ 54.641273] ? rcu_read_lock_sched_held+0x6f/0x80
[ 54.641273] ? kmem_cache_alloc_trace+0x1c7/0x1f0
[ 54.646814] __register_sysctl_paths+0x1c8/0x1f0
[ 54.646814] cdrom_sysctl_register.part.7+0xc/0x5f
[ 54.646814] register_cdrom.cold.24+0x2a/0x33
[ 54.646814] sr_probe+0x4bd/0x580
[ 54.646814] ? __driver_attach+0xd0/0xd0
[ 54.646814] really_probe+0xd6/0x260
[ 54.646814] ? __driver_attach+0xd0/0xd0
[ 54.646814] driver_probe_device+0x4a/0xb0
[ 54.646814] ? __driver_attach+0xd0/0xd0
[ 54.646814] bus_for_each_drv+0x73/0xc0
[ 54.646814] __device_attach+0xd6/0x130
[ 54.646814] bus_probe_device+0x9a/0xb0
[ 54.646814] device_add+0x40c/0x670
[ 54.646814] ? __pm_runtime_resume+0x4f/0x80
[ 54.646814] scsi_sysfs_add_sdev+0x81/0x290
[ 54.646814] scsi_probe_and_add_lun+0x888/0xc00
[ 54.646814] ? scsi_autopm_get_host+0x21/0x40
[ 54.646814] __scsi_add_device+0x116/0x130
[ 54.646814] ata_scsi_scan_host+0x93/0x1c0
[ 54.646814] async_run_entry_fn+0x34/0x100
[ 54.646814] process_one_work+0x237/0x5e0
[ 54.646814] worker_thread+0x37/0x380
[ 54.646814] ? rescuer_thread+0x360/0x360
[ 54.646814] kthread+0x118/0x130
[ 54.646814] ? kthread_create_on_node+0x60/0x60
[ 54.646814] ret_from_fork+0x3a/0x50
The only sensible explanation is that cdrom_sysctl_register() is called
twice, once from the module init function and once from register_cdrom().
cdrom_sysctl_register() is not mutex protected and may happily execute
twice if the second call is made before the first call is complete.
Use a static atomic to ensure that the function is executed exactly once.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manfred Schlaegl [Fri, 8 Feb 2019 18:24:47 +0000 (19:24 +0100)]
fbdev: fbmem: fix memory access if logo is bigger than the screen
[ Upstream commit
a5399db139cb3ad9b8502d8b1bd02da9ce0b9df0 ]
There is no clipping on the x or y axis for logos larger that the framebuffer
size. Therefore: a logo bigger than screen size leads to invalid memory access:
[ 1.254664] Backtrace:
[ 1.254728] [<
c02714e0>] (cfb_imageblit) from [<
c026184c>] (fb_show_logo+0x620/0x684)
[ 1.254763] r10:
00000003 r9:
00027fd8 r8:
c6a40000 r7:
c6a36e50 r6:
00000000 r5:
c06b81e4
[ 1.254774] r4:
c6a3e800
[ 1.254810] [<
c026122c>] (fb_show_logo) from [<
c026c1e4>] (fbcon_switch+0x3fc/0x46c)
[ 1.254842] r10:
c6a3e824 r9:
c6a3e800 r8:
00000000 r7:
c6a0c000 r6:
c070b014 r5:
c6a3e800
[ 1.254852] r4:
c6808c00
[ 1.254889] [<
c026bde8>] (fbcon_switch) from [<
c029c8f8>] (redraw_screen+0xf0/0x1e8)
[ 1.254918] r10:
00000000 r9:
00000000 r8:
00000000 r7:
00000000 r6:
c070d5a0 r5:
00000080
[ 1.254928] r4:
c6808c00
[ 1.254961] [<
c029c808>] (redraw_screen) from [<
c029d264>] (do_bind_con_driver+0x194/0x2e4)
[ 1.254991] r9:
00000000 r8:
00000000 r7:
00000014 r6:
c070d5a0 r5:
c070d5a0 r4:
c070d5a0
So prevent displaying a logo bigger than screen size and avoid invalid
memory access.
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiner Kallweit [Wed, 6 Feb 2019 18:39:52 +0000 (19:39 +0100)]
net: phy: consider latched link-down status in polling mode
[ Upstream commit
93c0970493c71f264e6c3c7caf1ff24a9e1de786 ]
The link status value latches link-down events. To get the current
status we read the register twice in genphy_update_link(). There's
a potential risk that we miss a link-down event in polling mode.
This may cause issues if the user e.g. connects his machine to a
different network.
On the other hand reading the latched value may cause issues in
interrupt mode. Following scenario:
- After boot link goes up
- phy_start() is called triggering an aneg restart, hence link goes
down and link-down info is latched.
- After aneg has finished link goes up and triggers an interrupt.
Interrupt handler reads link status, means it reads the latched
"link is down" info. But there won't be another interrupt as long
as link stays up, therefore phylib will never recognize that link
is up.
Deal with both scenarios by reading the register twice in interrupt
mode only.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Raju Rangoju [Wed, 6 Feb 2019 17:24:44 +0000 (22:54 +0530)]
iw_cxgb4: fix srqidx leak during connection abort
[ Upstream commit
f368ff188ae4b3ef6f740a15999ea0373261b619 ]
When an application aborts the connection by moving QP from RTS to ERROR,
then iw_cxgb4's modify_rc_qp() RTS->ERROR logic sets the
*srqidxp to 0 via t4_set_wq_in_error(&qhp->wq, 0), and aborts the
connection by calling c4iw_ep_disconnect().
c4iw_ep_disconnect() does the following:
1. sends up a close_complete_upcall(ep, -ECONNRESET) to libcxgb4.
2. sends abort request CPL to hw.
But, since the close_complete_upcall() is sent before sending the
ABORT_REQ to hw, libcxgb4 would fail to release the srqidx if the
connection holds one. Because, the srqidx is passed up to libcxgb4 only
after corresponding ABORT_RPL is processed by kernel in abort_rpl().
This patch handle the corner-case by moving the call to
close_complete_upcall() from c4iw_ep_disconnect() to abort_rpl(). So that
libcxgb4 is notified about the -ECONNRESET only after abort_rpl(), and
libcxgb4 can relinquish the srqidx properly.
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell King [Fri, 8 Feb 2019 15:35:43 +0000 (15:35 +0000)]
net: marvell: mvpp2: fix stuck in-band SGMII negotiation
[ Upstream commit
316734fdcf70900a83065360cff11a5826919067 ]
It appears that the mvpp22 can get stuck with SGMII negotiation. The
symptoms are that in-band negotiation never completes and the partner
(eg, PHY) never reports SGMII link up, or if it supports negotiation
bypass, goes into negotiation bypass mode (which will happen when the
PHY sees that the MAC is alive but gets no response.)
Triggering the PHY end of the link to re-negotiate results in the
bypass bit clearing on the PHY, and then re-setting - indicating that
the problem is at the mvpp22 GMAC end.
Asserting the GMAC reset and de-asserting it resolves the issue.
Arrange to assert the GMAC reset at probe time, and deassert it only
after we have configured the GMAC for the appropriate mode. This
resolves the issue.
Tested-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Gleixner [Fri, 8 Feb 2019 13:48:03 +0000 (14:48 +0100)]
genirq: Avoid summation loops for /proc/stat
[ Upstream commit
1136b0728969901a091f0471968b2b76ed14d9ad ]
Waiman reported that on large systems with a large amount of interrupts the
readout of /proc/stat takes a long time to sum up the interrupt
statistics. In principle this is not a problem. but for unknown reasons
some enterprise quality software reads /proc/stat with a high frequency.
The reason for this is that interrupt statistics are accounted per cpu. So
the /proc/stat logic has to sum up the interrupt stats for each interrupt.
This can be largely avoided for interrupts which are not marked as
'PER_CPU' interrupts by simply adding a per interrupt summation counter
which is incremented along with the per interrupt per cpu counter.
The PER_CPU interrupts need to avoid that and use only per cpu accounting
because they share the interrupt number and the interrupt descriptor and
concurrent updates would conflict or require unwanted synchronization.
Reported-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Daniel Colascione <dancol@google.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/20190208135020.925487496@linutronix.de
8<-------------
v2: Undo the unintentional layout change of struct irq_desc.
include/linux/irqdesc.h | 1 +
kernel/irq/chip.c | 12 ++++++++++--
kernel/irq/internals.h | 8 +++++++-
kernel/irq/irqdesc.c | 7 ++++++-
4 files changed, 24 insertions(+), 4 deletions(-)
Signed-off-by: Sasha Levin <sashal@kernel.org>
Coly Li [Sat, 9 Feb 2019 04:52:59 +0000 (12:52 +0800)]
bcache: improve sysfs_strtoul_clamp()
[ Upstream commit
596b5a5dd1bc2fa019fdaaae522ef331deef927f ]
Currently sysfs_strtoul_clamp() is defined as,
82 #define sysfs_strtoul_clamp(file, var, min, max) \
83 do { \
84 if (attr == &sysfs_ ## file) \
85 return strtoul_safe_clamp(buf, var, min, max) \
86 ?: (ssize_t) size; \
87 } while (0)
The problem is, if bit width of var is less then unsigned long, min and
max may not protect var from integer overflow, because overflow happens
in strtoul_safe_clamp() before checking min and max.
To fix such overflow in sysfs_strtoul_clamp(), to make min and max take
effect, this patch adds an unsigned long variable, and uses it to macro
strtoul_safe_clamp() to convert an unsigned long value in range defined
by [min, max]. Then assign this value to var. By this method, if bit
width of var is less than unsigned long, integer overflow won't happen
before min and max are checking.
Now sysfs_strtoul_clamp() can properly handle smaller data type like
unsigned int, of cause min and max should be defined in range of
unsigned int too.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Coly Li [Sat, 9 Feb 2019 04:53:05 +0000 (12:53 +0800)]
bcache: fix potential div-zero error of writeback_rate_i_term_inverse
[ Upstream commit
c3b75a2199cdbfc1c335155fe143d842604b1baa ]
dc->writeback_rate_i_term_inverse can be set via sysfs interface. It is
in type unsigned int, and convert from input string by d_strtoul(). The
problem is d_strtoul() does not check valid range of the input, if
4294967296 is written into sysfs file writeback_rate_i_term_inverse,
an overflow of unsigned integer will happen and value 0 is set to
dc->writeback_rate_i_term_inverse.
In writeback.c:__update_writeback_rate(), there are following lines of
code,
integral_scaled = div_s64(dc->writeback_rate_integral,
dc->writeback_rate_i_term_inverse);
If dc->writeback_rate_i_term_inverse is set to 0 via sysfs interface,
a div-zero error might be triggered in the above code.
Therefore we need to add a range limitation in the sysfs interface,
this is what this patch does, use sysfs_stroul_clamp() to replace
d_strtoul() and restrict the input range in [1, UINT_MAX].
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Coly Li [Sat, 9 Feb 2019 04:53:01 +0000 (12:53 +0800)]
bcache: fix input overflow to sequential_cutoff
[ Upstream commit
8c27a3953e92eb0b22dbb03d599f543a05f9574e ]
People may set sequential_cutoff of a cached device via sysfs file,
but current code does not check input value overflow. E.g. if value
4294967295 (UINT_MAX) is written to file sequential_cutoff, its value
is 4GB, but if
4294967296 (UINT_MAX + 1) is written into, its value
will be 0. This is an unexpected behavior.
This patch replaces d_strtoi_h() by sysfs_strtoul_clamp() to convert
input string to unsigned integer value, and limit its range in
[0, UINT_MAX]. Then the input overflow can be fixed.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Coly Li [Sat, 9 Feb 2019 04:53:10 +0000 (12:53 +0800)]
bcache: fix input overflow to cache set sysfs file io_error_halflife
[ Upstream commit
a91fbda49f746119828f7e8ad0f0aa2ab0578f65 ]
Cache set sysfs entry io_error_halflife is used to set c->error_decay.
c->error_decay is in type unsigned int, and it is converted by
strtoul_or_return(), therefore overflow to c->error_decay is possible
for a large input value.
This patch fixes the overflow by using strtoul_safe_clamp() to convert
input string to an unsigned long value in range [0, UINT_MAX], then
divides by 88 and set it to c->error_decay.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luc Van Oostenryck [Fri, 18 Jan 2019 14:49:36 +0000 (15:49 +0100)]
sched/topology: Fix percpu data types in struct sd_data & struct s_data
[ Upstream commit
99687cdbb3f6c8e32bcc7f37496e811f30460e48 ]
The percpu members of struct sd_data and s_data are declared as:
struct ... ** __percpu member;
So their type is:
__percpu pointer to pointer to struct ...
But looking at how they're used, their type should be:
pointer to __percpu pointer to struct ...
and they should thus be declared as:
struct ... * __percpu *member;
So fix the placement of '__percpu' in the definition of these
structures.
This addresses a bunch of Sparse's warnings like:
warning: incorrect type in initializer (different address spaces)
expected void const [noderef] <asn:3> *__vpp_verify
got struct sched_domain **
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190118144936.79158-1-luc.vanoostenryck@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Stultz [Tue, 5 Feb 2019 18:24:40 +0000 (10:24 -0800)]
usb: f_fs: Avoid crash due to out-of-scope stack ptr access
[ Upstream commit
54f64d5c983f939901dacc8cfc0983727c5c742e ]
Since the 5.0 merge window opened, I've been seeing frequent
crashes on suspend and reboot with the trace:
[ 36.911170] Unable to handle kernel paging request at virtual address
ffffff801153d660
[ 36.912769] Unable to handle kernel paging request at virtual address
ffffff800004b564
...
[ 36.950666] Call trace:
[ 36.950670] queued_spin_lock_slowpath+0x1cc/0x2c8
[ 36.950681] _raw_spin_lock_irqsave+0x64/0x78
[ 36.950692] complete+0x28/0x70
[ 36.950703] ffs_epfile_io_complete+0x3c/0x50
[ 36.950713] usb_gadget_giveback_request+0x34/0x108
[ 36.950721] dwc3_gadget_giveback+0x50/0x68
[ 36.950723] dwc3_thread_interrupt+0x358/0x1488
[ 36.950731] irq_thread_fn+0x30/0x88
[ 36.950734] irq_thread+0x114/0x1b0
[ 36.950739] kthread+0x104/0x130
[ 36.950747] ret_from_fork+0x10/0x1c
I isolated this down to in ffs_epfile_io():
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/usb/gadget/function/f_fs.c#n1065
Where the completion done is setup on the stack:
DECLARE_COMPLETION_ONSTACK(done);
Then later we setup a request and queue it, and wait for it:
if (unlikely(wait_for_completion_interruptible(&done))) {
/*
* To avoid race condition with ffs_epfile_io_complete,
* dequeue the request first then check
* status. usb_ep_dequeue API should guarantee no race
* condition with req->complete callback.
*/
usb_ep_dequeue(ep->ep, req);
interrupted = ep->status < 0;
}
The problem is, that we end up being interrupted, dequeue the
request, and exit.
But then the irq triggers and we try calling complete() on the
context pointer which points to now random stack space, which
results in the panic.
Alan Stern pointed out there is a bug here, in that the snippet
above "assumes that usb_ep_dequeue() waits until the request has
been completed." And that:
wait_for_completion(&done);
Is needed right after the usb_ep_dequeue().
Thus this patch implements that change. With it I no longer see
the crashes on suspend or reboot.
This issue seems to have been uncovered by behavioral changes in
the dwc3 driver in commit
fec9095bdef4e ("usb: dwc3: gadget:
remove wait_end_transfer").
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: Thinh Nguyen <thinh.nguyen@synopsys.com>
Cc: Chen Yu <chenyu56@huawei.com>
Cc: Jerry Zhang <zhangjerry@google.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Vincent Pelletier <plr.vincent@gmail.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linux USB List <linux-usb@vger.kernel.org>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rakesh Pillai [Fri, 8 Feb 2019 13:50:24 +0000 (15:50 +0200)]
ath10k: fix shadow register implementation for WCN3990
[ Upstream commit
1863008369ae0407508033b4b00f98b985adeb15 ]
WCN3990 supports shadow registers write operation support
for copy engine for regular operation in powersave mode.
Since WCN3990 is a 64-bit target, the shadow register
implementation needs to be done in the copy engine handlers
for 64-bit target. Currently the shadow register implementation
is present in the 32-bit target handlers of copy engine.
Fix the shadow register copy engine write operation
implementation for 64-bit target(WCN3990).
Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1
Fixes:
b7ba83f7c414 ("ath10k: add support for shadow register for WNC3990")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ranjani Sridharan [Fri, 8 Feb 2019 23:29:53 +0000 (17:29 -0600)]
ALSA: PCM: check if ops are defined before suspending PCM
[ Upstream commit
d9c0b2afe820fa3b3f8258a659daee2cc71ca3ef ]
BE dai links only have internal PCM's and their substream ops may
not be set. Suspending these PCM's will result in their
ops->trigger() being invoked and cause a kernel oops.
So skip suspending PCM's if their ops are NULL.
[ NOTE: this change is required now for following the recent PCM core
change to get rid of snd_pcm_suspend() call. Since DPCM BE takes
the runtime carried from FE while keeping NULL ops, it can hit this
bug. See details at:
https://github.com/thesofproject/linux/pull/582
-- tiwai ]
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Blumenstingl [Sat, 29 Dec 2018 14:35:56 +0000 (15:35 +0100)]
ARM: dts: meson8b: fix the Ethernet data line signals in eth_rgmii_pins
[ Upstream commit
29f0023d01f063feacfc404f0446905aee4f82ee ]
According to the Odroid-C1+ schematics the Ethernet TXD1 signal is
routed to GPIOH_5 and the TXD0 signal is routed to GPIOH_6.
The public S805 datasheet shows that TXD0 can be routed to DIF_2_P and
TXD1 can be routed to DIF_2_N instead.
The pin groups eth_txd0_0 (GPIOH_6) and eth_txd0_1 (DIF_2_P) are both
configured as Ethernet TXD0 and TXD1 data lines in meson8b.dtsi. At the
same time eth_txd1_0 (GPIOH_5) and eth_txd1_1 (DIF_2_N) are configured
as TXD0 and TXD1 data lines as well.
This results in a bad Ethernet receive performance. Presumably this is
due to the eth_txd0 and eth_txd1 signal being routed to the wrong pins.
As a result of that data can only be transmitted on eth_txd2 and
eth_txd3. However, I have no scope to fully confirm this assumption.
The vendor u-boot sources for Odroid-C1 use the following Ethernet
pinmux configuration:
SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_6, 0x3f4f);
SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_7, 0xf00000);
This translates to the following pin groups in the mainline kernel:
- register 6 bit 0: eth_rxd1 (DIF_0_P)
- register 6 bit 1: eth_rxd0 (DIF_0_N)
- register 6 bit 2: eth_rx_dv (DIF_1_P)
- register 6 bit 3: eth_rx_clk (DIF_1_N)
- register 6 bit 6: eth_tx_en (DIF_3_P)
- register 6 bit 8: eth_ref_clk (DIF_3_N)
- register 6 bit 9: eth_mdc (DIF_4_P)
- register 6 bit 10: eth_mdio_en (DIF_4_N)
- register 6 bit 11: eth_tx_clk (GPIOH_9)
- register 6 bit 12: eth_txd2 (GPIOH_8)
- register 6 bit 13: eth_txd3 (GPIOH_7)
- register 7 bit 20: eth_txd0_0 (GPIOH_6)
- register 7 bit 21: eth_txd1_0 (GPIOH_5)
- register 7 bit 22: eth_rxd3 (DIF_2_P)
- register 7 bit 23: eth_rxd2 (DIF_2_N)
Drop the eth_txd0_1 and eth_txd1_1 groups from eth_rgmii_pins to fix the
Ethernet transmit performance on Odroid-C1. Also add the eth_rxd2 and
eth_rxd3 groups so we don't rely on the bootloader to set them up.
iperf3 statistics before this change:
- transmitting from Odroid-C1: 741 Mbits/sec (0 retries)
- receiving on Odroid-C1: 199 Mbits/sec (1713 retries)
iperf3 statistics after this change:
- transmitting from Odroid-C1: 667 Mbits/sec (0 retries)
- receiving on Odroid-C1: 750 Mbits/sec (0 retries)
Fixes:
b96446541d8390 ("ARM: dts: meson8b: extend ethernet controller description")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Emiliano Ingrassia <ingrassia@epigenesys.com>
Cc: Linus Lüssing <linus.luessing@c0d3.blue>
Tested-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
Reviewed-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Sat, 2 Feb 2019 02:34:36 +0000 (03:34 +0100)]
ARM: 8833/1: Ensure that NEON code always compiles with Clang
[ Upstream commit
de9c0d49d85dc563549972edc5589d195cd5e859 ]
While building arm32 allyesconfig, I ran into the following errors:
arch/arm/lib/xor-neon.c:17:2: error: You should compile this file with
'-mfloat-abi=softfp -mfpu=neon'
In file included from lib/raid6/neon1.c:27:
/home/nathan/cbl/prebuilt/lib/clang/8.0.0/include/arm_neon.h:28:2:
error: "NEON support not enabled"
Building V=1 showed NEON_FLAGS getting passed along to Clang but
__ARM_NEON__ was not getting defined. Ultimately, it boils down to Clang
only defining __ARM_NEON__ when targeting armv7, rather than armv6k,
which is the '-march' value for allyesconfig.
>From lib/Basic/Targets/ARM.cpp in the Clang source:
// This only gets set when Neon instructions are actually available, unlike
// the VFP define, hence the soft float and arch check. This is subtly
// different from gcc, we follow the intent which was that it should be set
// when Neon instructions are actually available.
if ((FPU & NeonFPU) && !SoftFloat && ArchVersion >= 7) {
Builder.defineMacro("__ARM_NEON", "1");
Builder.defineMacro("__ARM_NEON__");
// current AArch32 NEON implementations do not support double-precision
// floating-point even when it is present in VFP.
Builder.defineMacro("__ARM_NEON_FP",
"0x" + Twine::utohexstr(HW_FP & ~HW_FP_DP));
}
Ard Biesheuvel recommended explicitly adding '-march=armv7-a' at the
beginning of the NEON_FLAGS definitions so that __ARM_NEON__ always gets
definined by Clang. This doesn't functionally change anything because
that code will only run where NEON is supported, which is implicitly
armv7.
Link: https://github.com/ClangBuiltLinux/linux/issues/287
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chieh-Min Wang [Mon, 11 Feb 2019 23:59:55 +0000 (00:59 +0100)]
netfilter: conntrack: fix cloned unconfirmed skb->_nfct race in __nf_conntrack_confirm
[ Upstream commit
13f5251fd17088170c18844534682d9cab5ff5aa ]
For bridge(br_flood) or broadcast/multicast packets, they could clone
skb with unconfirmed conntrack which break the rule that unconfirmed
skb->_nfct is never shared. With nfqueue running on my system, the race
can be easily reproduced with following warning calltrace:
[13257.707525] CPU: 0 PID: 12132 Comm: main Tainted: P W 4.4.60 #7744
[13257.707568] Hardware name: Qualcomm (Flattened Device Tree)
[13257.714700] [<
c021f6dc>] (unwind_backtrace) from [<
c021bce8>] (show_stack+0x10/0x14)
[13257.720253] [<
c021bce8>] (show_stack) from [<
c0449e10>] (dump_stack+0x94/0xa8)
[13257.728240] [<
c0449e10>] (dump_stack) from [<
c022a7e0>] (warn_slowpath_common+0x94/0xb0)
[13257.735268] [<
c022a7e0>] (warn_slowpath_common) from [<
c022a898>] (warn_slowpath_null+0x1c/0x24)
[13257.743519] [<
c022a898>] (warn_slowpath_null) from [<
c06ee450>] (__nf_conntrack_confirm+0xa8/0x618)
[13257.752284] [<
c06ee450>] (__nf_conntrack_confirm) from [<
c0772670>] (ipv4_confirm+0xb8/0xfc)
[13257.761049] [<
c0772670>] (ipv4_confirm) from [<
c06e7a60>] (nf_iterate+0x48/0xa8)
[13257.769725] [<
c06e7a60>] (nf_iterate) from [<
c06e7af0>] (nf_hook_slow+0x30/0xb0)
[13257.777108] [<
c06e7af0>] (nf_hook_slow) from [<
c07f20b4>] (br_nf_post_routing+0x274/0x31c)
[13257.784486] [<
c07f20b4>] (br_nf_post_routing) from [<
c06e7a60>] (nf_iterate+0x48/0xa8)
[13257.792556] [<
c06e7a60>] (nf_iterate) from [<
c06e7af0>] (nf_hook_slow+0x30/0xb0)
[13257.800458] [<
c06e7af0>] (nf_hook_slow) from [<
c07e5580>] (br_forward_finish+0x94/0xa4)
[13257.808010] [<
c07e5580>] (br_forward_finish) from [<
c07f22ac>] (br_nf_forward_finish+0x150/0x1ac)
[13257.815736] [<
c07f22ac>] (br_nf_forward_finish) from [<
c06e8df0>] (nf_reinject+0x108/0x170)
[13257.824762] [<
c06e8df0>] (nf_reinject) from [<
c06ea854>] (nfqnl_recv_verdict+0x3d8/0x420)
[13257.832924] [<
c06ea854>] (nfqnl_recv_verdict) from [<
c06e940c>] (nfnetlink_rcv_msg+0x158/0x248)
[13257.841256] [<
c06e940c>] (nfnetlink_rcv_msg) from [<
c06e5564>] (netlink_rcv_skb+0x54/0xb0)
[13257.849762] [<
c06e5564>] (netlink_rcv_skb) from [<
c06e4ec8>] (netlink_unicast+0x148/0x23c)
[13257.858093] [<
c06e4ec8>] (netlink_unicast) from [<
c06e5364>] (netlink_sendmsg+0x2ec/0x368)
[13257.866348] [<
c06e5364>] (netlink_sendmsg) from [<
c069fb8c>] (sock_sendmsg+0x34/0x44)
[13257.874590] [<
c069fb8c>] (sock_sendmsg) from [<
c06a03dc>] (___sys_sendmsg+0x1ec/0x200)
[13257.882489] [<
c06a03dc>] (___sys_sendmsg) from [<
c06a11c8>] (__sys_sendmsg+0x3c/0x64)
[13257.890300] [<
c06a11c8>] (__sys_sendmsg) from [<
c0209b40>] (ret_fast_syscall+0x0/0x34)
The original code just triggered the warning but do nothing. It will
caused the shared conntrack moves to the dying list and the packet be
droppped (nf_ct_resolve_clash returns NF_DROP for dying conntrack).
- Reproduce steps:
+----------------------------+
| br0(bridge) |
| |
+-+---------+---------+------+
| eth0| | eth1| | eth2|
| | | | | |
+--+--+ +--+--+ +---+-+
| | |
| | |
+--+-+ +-+--+ +--+-+
| PC1| | PC2| | PC3|
+----+ +----+ +----+
iptables -A FORWARD -m mark --mark 0x1000000/0x1000000 -j NFQUEUE --queue-num 100 --queue-bypass
ps: Our nfq userspace program will set mark on packets whose connection
has already been processed.
PC1 sends broadcast packets simulated by hping3:
hping3 --rand-source --udp 192.168.1.255 -i u100
- Broadcast racing flow chart is as follow:
br_handle_frame
BR_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, br_handle_frame_finish)
// skb->_nfct (unconfirmed conntrack) is constructed at PRE_ROUTING stage
br_handle_frame_finish
// check if this packet is broadcast
br_flood_forward
br_flood
list_for_each_entry_rcu(p, &br->port_list, list) // iterate through each port
maybe_deliver
deliver_clone
skb = skb_clone(skb)
__br_forward
BR_HOOK(NFPROTO_BRIDGE, NF_BR_FORWARD,...)
// queue in our nfq and received by our userspace program
// goto __nf_conntrack_confirm with process context on CPU 1
br_pass_frame_up
BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN,...)
// goto __nf_conntrack_confirm with softirq context on CPU 0
Because conntrack confirm can happen at both INPUT and POSTROUTING
stage. So with NFQUEUE running, skb->_nfct with the same unconfirmed
conntrack could race on different core.
This patch fixes a repeating kernel splat, now it is only displayed
once.
Signed-off-by: Chieh-Min Wang <chiehminw@synology.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu [Tue, 12 Feb 2019 16:14:37 +0000 (01:14 +0900)]
kprobes: Prohibit probing on RCU debug routine
[ Upstream commit
a39f15b9644fac3f950f522c39e667c3af25c588 ]
Since kprobe itself depends on RCU, probing on RCU debug
routine can cause recursive breakpoint bugs.
Prohibit probing on RCU debug routines.
int3
->do_int3()
->ist_enter()
->RCU_LOCKDEP_WARN()
->debug_lockdep_rcu_enabled() -> int3
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/154998807741.31052.11229157537816341591.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrea Righi [Tue, 12 Feb 2019 16:15:34 +0000 (01:15 +0900)]
kprobes: Prohibit probing on bsearch()
[ Upstream commit
02106f883cd745523f7766d90a739f983f19e650 ]
Since kprobe breakpoing handler is using bsearch(), probing on this
routine can cause recursive breakpoint problem.
int3
->do_int3()
->ftrace_int3_handler()
->ftrace_location()
->ftrace_location_range()
->bsearch() -> int3
Prohibit probing on bsearch().
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/154998813406.31052.8791425358974650922.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tycho Andersen [Sat, 19 Jan 2019 00:12:15 +0000 (17:12 -0700)]
selftests: skip seccomp get_metadata test if not real root
[ Upstream commit
3aa415dd2128e478ea3225b59308766de0e94d6b ]
The get_metadata() test requires real root, so let's skip it if we're not
real root.
Note that I used XFAIL here because that's what the test does later if
CONFIG_CHEKCKPOINT_RESTORE happens to not be enabled. After looking at the
code, there doesn't seem to be a nice way to skip tests defined as TEST(),
since there's no return code (I tried exit(KSFT_SKIP), but that didn't work
either...). So let's do it this way to be consistent, and easier to fix
when someone comes along and fixes it.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Mon, 7 Jan 2019 16:08:20 +0000 (17:08 +0100)]
ACPI / video: Refactor and fix dmi_is_desktop()
[ Upstream commit
cecf3e3e0803462335e25d083345682518097334 ]
This commit refactors the chassis-type detection introduced by
commit
53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true on
Win8-ready _desktops_") (where desktop means anything without a builtin
screen).
The DMI chassis_type is an unsigned integer, so rather then doing a
whole bunch of string-compares on it, convert it to an int and feed
the result to a switch case.
Note the switch case uses hex values, this is done because the spec
uses hex values too. This changes the check for "Main Server Chassis"
from checking for 11 decimal to 11 hexadecimal, this is a bug fix,
the original check for 11 decimal was wrong.
Fixes:
53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true ...")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ rjw: Drop redundant return statements ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sara Sharon [Thu, 13 Dec 2018 12:47:40 +0000 (14:47 +0200)]
iwlwifi: pcie: fix emergency path
[ Upstream commit
c6ac9f9fb98851f47b978a9476594fc3c477a34d ]
Allocator swaps the pending requests with 0 when it starts
working. This means that relying on it n RX path to decide if
to move to emergency is not always a good idea, since it may
be zero, but there are still a lot of unallocated RBs in the
system. Change allocator to decrement the pending requests on
real time. It is more expensive since it accesses the atomic
variable more times, but it gives the RX path a better idea
of the system's status.
Reported-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Fixes:
868a1e863f95 ("iwlwifi: pcie: avoid empty free RB queue")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Richter [Mon, 11 Feb 2019 10:06:27 +0000 (11:06 +0100)]
perf report: Add s390 diagnosic sampling descriptor size
[ Upstream commit
2187d87eacd46f6214ce3dc9cfd7a558375a4153 ]
On IBM z13 machine types 2964 and 2965 the descriptor
sizes for sampling and diagnostic sampling entries
might be missing in the trailer entry and are set to zero.
This leads to a perf report failure when processing diagnostic
sampling entries.
This patch adds missing descriptor sizes when the trailer entry
contains zero for these fields.
Output before:
[root@s38lp82 perf]# ./perf report --stdio | fgrep Samples
0xabbf0 [0x8]: failed to process type: 68
Error:
failed to process sample
[root@s38lp82 perf]#
Output after:
[root@s38lp82 perf]# ./perf report --stdio | fgrep Samples
# Total Lost Samples: 0
# Samples: 3K of event 'SF_CYCLES_BASIC_DIAG'
# Samples: 162 of event 'CF_DIAG'
[root@s38lp82 perf]#
Fixes:
2b1444f2e28b ("perf report: Add raw report support for s390 auxiliary trace")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20190211100627.85714-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Kazior [Mon, 11 Feb 2019 09:29:27 +0000 (10:29 +0100)]
leds: lp55xx: fix null deref on firmware load failure
[ Upstream commit
5ddb0869bfc1bca6cfc592c74c64a026f936638c ]
I've stumbled upon a kernel crash and the logs
pointed me towards the lp5562 driver:
> <4>[306013.841294] lp5562 0-0030: Direct firmware load for lp5562 failed with error -2
> <4>[306013.894990] lp5562 0-0030: Falling back to user helper
> ...
> <3>[306073.924886] lp5562 0-0030: firmware request failed
> <1>[306073.939456] Unable to handle kernel NULL pointer dereference at virtual address
00000000
> <4>[306074.251011] PC is at _raw_spin_lock+0x1c/0x58
> <4>[306074.255539] LR is at release_firmware+0x6c/0x138
> ...
After taking a look I noticed firmware_release()
could be called with either NULL or a dangling
pointer.
Fixes:
10c06d178df11 ("leds-lp55xx: support firmware interface")
Signed-off-by: Michal Kazior <michal@plume.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Theodore Ts'o [Thu, 14 Feb 2019 21:27:14 +0000 (16:27 -0500)]
jbd2: fix race when writing superblock
[ Upstream commit
538bcaa6261b77e71d37f5596c33127c1a3ec3f7 ]
The jbd2 superblock is lockless now, so there is probably a race
condition between writing it so disk and modifing contents of it, which
may lead to checksum error. The following race is the one case that we
have captured.
jbd2 fsstress
jbd2_journal_commit_transaction
jbd2_journal_update_sb_log_tail
jbd2_write_superblock
jbd2_superblock_csum_set jbd2_journal_revoke
jbd2_journal_set_features(revork)
modify superblock
submit_bh(checksum incorrect)
Fix this by locking the buffer head before modifing it. We always
write the jbd2 superblock after we modify it, so this just means
calling the lock_buffer() a little earlier.
This checksum corruption problem can be reproduced by xfstests
generic/475.
Reported-by: zhangyi (F) <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tejun Heo [Fri, 15 Feb 2019 19:01:31 +0000 (11:01 -0800)]
cgroup, rstat: Don't flush subtree root unless necessary
[ Upstream commit
b4ff1b44bcd384d22fcbac6ebaf9cc0d33debe50 ]
cgroup_rstat_cpu_pop_updated() is used to traverse the updated cgroups
on flush. While it was only visiting updated ones in the subtree, it
was visiting @root unconditionally. We can easily check whether @root
is updated or not by looking at its ->updated_next just as with the
cgroups in the subtree.
* Remove the unnecessary cgroup_parent() test. The system root cgroup
is never updated and thus its ->updated_next is always NULL. No
need to test whether cgroup_parent() exists in addition to
->updated_next.
* Terminate traverse if ->updated_next is NULL. This can only happen
for subtree @root and there's no reason to visit it if it's not
marked updated.
This reduces cpu consumption when reading a lot of rstat backed files.
In a micro benchmark reading stat from ~1600 cgroups, the sys time was
lowered by >40%.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hong Liu [Tue, 12 Feb 2019 12:05:20 +0000 (20:05 +0800)]
HID: intel-ish-hid: avoid binding wrong ishtp_cl_device
[ Upstream commit
0d28f49412405d87d3aae83da255070a46e67627 ]
When performing a warm reset in ishtp bus driver, the ishtp_cl_device
will not be removed, its fw_client still points to the already freed
ishtp_device.fw_clients array.
Later after driver finishing ishtp client enumeration, this dangling
pointer may cause driver to bind the wrong ishtp_cl_device to the new
client, causing wrong callback to be called for messages intended for
the new client.
This helps in development of firmware where frequent switching of
firmwares is required without Linux reboot.
Signed-off-by: Hong Liu <hong.liu@intel.com>
Tested-by: Hongyan Song <hongyan.song@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aurelien Jarno [Thu, 6 Dec 2018 19:05:34 +0000 (20:05 +0100)]
vfs: fix preadv64v2 and pwritev64v2 compat syscalls with offset == -1
[ Upstream commit
cc4b1242d7e3b42eed73881fc749944146493e4f ]
The preadv2 and pwritev2 syscalls are supposed to emulate the readv and
writev syscalls when offset == -1. Therefore the compat code should
check for offset before calling do_compat_preadv64 and
do_compat_pwritev64. This is the case for the preadv2 and pwritev2
syscalls, but handling of offset == -1 is missing in their 64-bit
equivalent.
This patch fixes that, calling do_compat_readv and do_compat_writev when
offset == -1. This fixes the following glibc tests on x32:
- misc/tst-preadvwritev2
- misc/tst-preadvwritev64v2
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oleksandr Andrushchenko [Thu, 14 Feb 2019 14:23:20 +0000 (16:23 +0200)]
xen/gntdev: Do not destroy context while dma-bufs are in use
[ Upstream commit
fa13e665e02874c0a5f4d06d6967ae34a6cb3d6a ]
If there are exported DMA buffers which are still in use and
grant device is closed by either normal user-space close or by
a signal this leads to the grant device context to be destroyed,
thus making it not possible to correctly destroy those exported
buffers when they are returned back to gntdev and makes the module
crash:
[ 339.617540] [<
ffff00000854c0d8>] dmabuf_exp_ops_release+0x40/0xa8
[ 339.617560] [<
ffff00000867a6e8>] dma_buf_release+0x60/0x190
[ 339.617577] [<
ffff0000082211f0>] __fput+0x88/0x1d0
[ 339.617589] [<
ffff000008221394>] ____fput+0xc/0x18
[ 339.617607] [<
ffff0000080ed4e4>] task_work_run+0x9c/0xc0
[ 339.617622] [<
ffff000008089714>] do_notify_resume+0xfc/0x108
Fix this by referencing gntdev on each DMA buffer export and
unreferencing on buffer release.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Boris Ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Sun, 10 Feb 2019 21:49:15 +0000 (22:49 +0100)]
mt76: usb: do not run mt76u_queues_deinit twice
[ Upstream commit
b3098121c42caaf3aea239b8655cf52d45be116f ]
Do not call mt76u_queues_deinit routine in mt76u_alloc_queues error path
since it will be run in mt76x0u_register_device or
mt76x2u_register_device error path. Current implementation triggers the
following kernel warning:
[ 67.005516] WARNING: CPU: 2 PID: 761 at lib/refcount.c:187 refcount_sub_and_test_checked+0xa4/0xb8
[ 67.019513] refcount_t: underflow; use-after-free.
[ 67.099872] Hardware name: BCM2835
[ 67.106268] Backtrace:
[ 67.111584] [<
8010c91c>] (dump_backtrace) from [<
8010cc00>] (show_stack+0x20/0x24)
[ 67.124974] r6:
60000013 r5:
ffffffff r4:
00000000 r3:
a50bade6
[ 67.132226] [<
8010cbe0>] (show_stack) from [<
807ca5f4>] (dump_stack+0xc8/0x114)
[ 67.141225] [<
807ca52c>] (dump_stack) from [<
8011e65c>] (__warn+0xf4/0x120)
[ 67.149849] r9:
000000bb r8:
804d0138 r7:
00000009 r6:
8099dc84 r5:
00000000 r4:
b66c7b58
[ 67.160767] [<
8011e568>] (__warn) from [<
8011e6d0>] (warn_slowpath_fmt+0x48/0x50)
[ 67.171436] r9:
7f65e128 r8:
80d1419c r7:
80c0bac4 r6:
b97b3044 r5:
b7368e00 r4:
00000000
[ 67.182433] [<
8011e68c>] (warn_slowpath_fmt) from [<
804d0138>] (refcount_sub_and_test_checked+0xa4/0xb8)
[ 67.195221] r3:
80c91c25 r2:
8099dc94
[ 67.200370] r4:
00000000
[ 67.204397] [<
804d0094>] (refcount_sub_and_test_checked) from [<
804d0164>] (refcount_dec_and_test_checked+0x18/0x1c)
[ 67.218046] r4:
b7368e00 r3:
00000001
[ 67.223125] [<
804d014c>] (refcount_dec_and_test_checked) from [<
805db49c>] (usb_free_urb+0x20/0x4c)
[ 67.235358] [<
805db47c>] (usb_free_urb) from [<
7f639804>] (mt76u_buf_free+0x98/0xac [mt76_usb])
[ 67.247302] r4:
00000001 r3:
00000001
[ 67.252468] [<
7f63976c>] (mt76u_buf_free [mt76_usb]) from [<
7f639ef8>] (mt76u_queues_deinit+0x44/0x100 [mt76_usb])
[ 67.266102] r8:
b8fe8600 r7:
b5dac480 r6:
b5dace20 r5:
00000001 r4:
00000000 r3:
00000080
[ 67.277132] [<
7f639eb4>] (mt76u_queues_deinit [mt76_usb]) from [<
7f65c040>] (mt76x0u_cleanup+0x40/0x4c [mt76x0u])
[ 67.290737] r7:
b5dac480 r6:
b8fe8600 r5:
ffffffea r4:
b5dace20
[ 67.298069] [<
7f65c000>] (mt76x0u_cleanup [mt76x0u]) from [<
7f65c564>] (mt76x0u_probe+0x1f0/0x354 [mt76x0u])
[ 67.311174] r4:
b5dace20 r3:
00000000
[ 67.316312] [<
7f65c374>] (mt76x0u_probe [mt76x0u]) from [<
805e0b6c>] (usb_probe_interface+0x104/0x240)
[ 67.328915] r7:
00000000 r6:
7f65e034 r5:
b6634800 r4:
b8fe8620
[ 67.336276] [<
805e0a68>] (usb_probe_interface) from [<
8056a8bc>] (really_probe+0x224/0x2f8)
[ 67.347965] r10:
b65f0a00 r9:
00000019 r8:
7f65e034 r7:
80d3e124 r6:
00000000 r5:
80d3e120
[ 67.359175] r4:
b8fe8620 r3:
805e0a68
[ 67.364384] [<
8056a698>] (really_probe) from [<
8056ab60>] (driver_probe_device+0x6c/0x180)
[ 67.375974] r10:
b65f0a00 r9:
7f65e2c0 r8:
b8fe8620 r7:
00000000 r6:
7f65e034 r5:
7f65e034
[ 67.387170] r4:
b8fe8620 r3:
00000000
[ 67.392378] [<
8056aaf4>] (driver_probe_device) from [<
8056ad54>] (__driver_attach+0xe0/0xe4)
[ 67.404097] r9:
7f65e2c0 r8:
7f65d22c r7:
00000000 r6:
b8fe8654 r5:
7f65e034 r4:
b8fe8620
[ 67.415122] [<
8056ac74>] (__driver_attach) from [<
8056880c>] (bus_for_each_dev+0x68/0xa0)
[ 67.426628] r6:
8056ac74 r5:
7f65e034 r4:
00000000 r3:
00000027
[ 67.434017] [<
805687a4>] (bus_for_each_dev) from [<
8056a1cc>] (driver_attach+0x28/0x30)
[ 67.445394] r6:
80c6ddc8 r5:
b7368f80 r4:
7f65e034
[ 67.451703] [<
8056a1a4>] (driver_attach) from [<
80569c24>] (bus_add_driver+0x194/0x21c)
[ 67.463081] [<
80569a90>] (bus_add_driver) from [<
8056b504>] (driver_register+0x8c/0x124)
[ 67.474560] r7:
80c6ddc8 r6:
7f65e034 r5:
00000000 r4:
7f65e034
[ 67.481964] [<
8056b478>] (driver_register) from [<
805df510>] (usb_register_driver+0x74/0x140)
[ 67.493901] r5:
00000000 r4:
7f65e000
[ 67.499131] [<
805df49c>] (usb_register_driver) from [<
7f661024>] (mt76x0_driver_init+0x24/0x1000 [mt76x0u])
[ 67.512258] r9:
00000001 r8:
7f65e308 r7:
00000000 r6:
80c08d48 r5:
7f661000 r4:
7f65e2c0
[ 67.523404] [<
7f661000>] (mt76x0_driver_init [mt76x0u]) from [<
80102f6c>] (do_one_initcall+0x4c/0x210)
[ 67.536142] [<
80102f20>] (do_one_initcall) from [<
801ae63c>] (do_init_module+0x6c/0x21c)
[ 67.547639] r8:
7f65e308 r7:
80c08d48 r6:
b65f0ac0 r5:
7f65e2c0 r4:
7f65e2c0
[ 67.556129] [<
801ae5d0>] (do_init_module) from [<
801ad68c>] (load_module+0x1d10/0x2304)
Fixes:
b40b15e1521f ("mt76: add usb support to mt76 layer")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ezequiel Garcia [Fri, 8 Feb 2019 16:17:39 +0000 (11:17 -0500)]
media: mtk-jpeg: Correct return type for mem2mem buffer helpers
[ Upstream commit
1b275e4e8b70dbff9850874b30831c1bd8d3c504 ]
Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:
v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove
return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.
Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ezequiel Garcia [Fri, 8 Feb 2019 16:17:42 +0000 (11:17 -0500)]
media: mx2_emmaprp: Correct return type for mem2mem buffer helpers
[ Upstream commit
8d20dcefe471763f23ad538369ec65b51993ffff ]
Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:
v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove
return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.
Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ezequiel Garcia [Fri, 8 Feb 2019 16:17:44 +0000 (11:17 -0500)]
media: s5p-g2d: Correct return type for mem2mem buffer helpers
[ Upstream commit
30fa627b32230737bc3f678067e2adfecf956987 ]
Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:
v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove
return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.
Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ezequiel Garcia [Fri, 8 Feb 2019 16:17:43 +0000 (11:17 -0500)]
media: rockchip/rga: Correct return type for mem2mem buffer helpers
[ Upstream commit
da2d3a4e4adabc6ccfb100bc9abd58ee9cd6c4b7 ]
Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:
v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove
return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.
Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ezequiel Garcia [Fri, 8 Feb 2019 16:17:45 +0000 (11:17 -0500)]
media: s5p-jpeg: Correct return type for mem2mem buffer helpers
[ Upstream commit
4a88f89885c7cf65c62793f385261a6e3315178a ]
Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:
v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove
return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.
Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ezequiel Garcia [Fri, 8 Feb 2019 16:17:46 +0000 (11:17 -0500)]
media: sh_veu: Correct return type for mem2mem buffer helpers
[ Upstream commit
43c145195c7fc3025ee7ecfc67112ac1c82af7c2 ]
Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:
v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove
return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.
Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Akinobu Mita [Sun, 17 Feb 2019 15:17:47 +0000 (10:17 -0500)]
media: ov7740: fix runtime pm initialization
[ Upstream commit
12aceee1f412c3ddc7750155fec06c906f14ab51 ]
The runtime PM of this device is enabled after v4l2_ctrl_handler_setup(),
and this makes this device's runtime PM usage count a negative value.
The ov7740_set_ctrl() tries to do something only if the device's runtime
PM usage counter is nonzero.
ov7740_set_ctrl()
{
if (!pm_runtime_get_if_in_use(&client->dev))
return 0;
<do something>;
pm_runtime_put(&client->dev);
return ret;
}
However, the ov7740_set_ctrl() is called by v4l2_ctrl_handler_setup()
while the runtime PM of this device is not yet enabled. In this case,
the pm_runtime_get_if_in_use() returns -EINVAL (!= 0).
Therefore we can't bail out of this function and the usage count is
decreased by pm_runtime_put() without increment.
This fixes this problem by enabling the runtime PM of this device before
v4l2_ctrl_handler_setup() so that the ov7740_set_ctrl() is always called
when the runtime PM is enabled.
Cc: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Mon, 18 Feb 2019 15:13:47 +0000 (15:13 +0000)]
SoC: imx-sgtl5000: add missing put_device()
[ Upstream commit
8fa857da9744f513036df1c43ab57f338941ae7d ]
The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.
Detected by coccinelle with the following warnings:
./sound/soc/fsl/imx-sgtl5000.c:169:1-7: ERROR: missing put_device;
call of_find_device_by_node on line 105, but without a corresponding
object release within this function.
./sound/soc/fsl/imx-sgtl5000.c:177:1-7: ERROR: missing put_device;
call of_find_device_by_node on line 105, but without a corresponding
object release within this function.
Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
He Kuang [Tue, 19 Feb 2019 13:05:31 +0000 (21:05 +0800)]
perf report: Don't shadow inlined symbol with different addr range
[ Upstream commit
7346195e8643482968f547483e0d823ec1982fab ]
We can't assume inlined symbols with the same name are equal, because
their address range may be different. This will cause the symbols with
different addresses be shadowed when adding to the hist entry, and lead
to ERANGE error when checking the symbol address during sample parse,
the addr should be within the range of [sym.start, sym.end].
The error message is like: "0x36aea60 [0x8]: failed to process type: 68".
The second parameter of symbol__new() is the length of the fake symbol
for the inline frame, which is the subtraction of the end and start
address of base_sym.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes:
aa441895f7b4 ("perf report: Compare symbol name for inlined frames when sorting")
Link: http://lkml.kernel.org/r/20190219130531.15692-1-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Brian Norris [Fri, 15 Feb 2019 00:31:29 +0000 (16:31 -0800)]
mwifiex: don't advertise IBSS features without FW support
[ Upstream commit
6f21ab30469d670de620f758330aca9f3433f693 ]
As it is, doing something like
# iw phy phy0 interface add foobar type ibss
on a firmware that doesn't have ad-hoc support just yields failures of
HostCmd_CMD_SET_BSS_MODE, which happened to return a '-1' error code
(-EPERM? not really right...) and sometimes may even crash the firmware
along the way.
Let's parse the firmware capability flag while registering the wiphy, so
we don't allow attempting IBSS at all, and we get a proper -EOPNOTSUPP
from nl80211 instead.
Fixes:
e267e71e68ae ("mwifiex: Disable adhoc feature based on firmware capability")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Richter [Tue, 19 Feb 2019 15:36:39 +0000 (16:36 +0100)]
perf test: Fix failure of 'evsel-tp-sched' test on s390
[ Upstream commit
03d309711d687460d1345de8a0363f45b1c8cd11 ]
Commit
489338a717a0 ("perf tests evsel-tp-sched: Fix bitwise operator")
causes test case 14 "Parse sched tracepoints fields" to fail on s390.
This test succeeds on x86.
In fact this test now fails on all architectures with type char treated
as type unsigned char.
The root cause is the signed-ness of character arrays in the tracepoints
sched_switch for structure members prev_comm and next_comm.
On s390 the output of:
[root@m35lp76 perf]# cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 287
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
...
field:char prev_comm[16]; offset:8; size:16; signed:0;
...
field:char next_comm[16]; offset:40; size:16; signed:0;
reveals the character arrays prev_comm and next_comm are per
default unsigned char and have values in the range of 0..255.
On x86 both fields are signed as this output shows:
[root@f29]# cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 287
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
...
field:char prev_comm[16]; offset:8; size:16; signed:1;
...
field:char next_comm[16]; offset:40; size:16; signed:1;
and the character arrays prev_comm and next_comm are per default signed
char and have values in the range of -1..127. The implementation of
type char is architecture specific.
Since the character arrays in both tracepoints sched_switch and
sched_wakeup should contain ascii characters, simply omit the check for
signedness in the test case.
Output before:
[root@m35lp76 perf]# ./perf test -F 14
14: Parse sched tracepoints fields :
--- start ---
sched:sched_switch: "prev_comm" signedness(0) is wrong, should be 1
sched:sched_switch: "next_comm" signedness(0) is wrong, should be 1
sched:sched_wakeup: "comm" signedness(0) is wrong, should be 1
---- end ----
14: Parse sched tracepoints fields : FAILED!
[root@m35lp76 perf]#
Output after:
[root@m35lp76 perf]# ./perf test -Fv 14
14: Parse sched tracepoints fields :
--- start ---
---- end ----
Parse sched tracepoints fields: Ok
[root@m35lp76 perf]#
Fixes:
489338a717a0 ("perf tests evsel-tp-sched: Fix bitwise operator")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20190219153639.31267-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Kazlauskas [Fri, 25 Jan 2019 20:23:09 +0000 (15:23 -0500)]
drm/amd/display: Clear stream->mode_changed after commit
[ Upstream commit
d8d2f174bcc2c26c3485c70e0c6fe22b27bce739 ]
[Why]
The stream->mode_changed flag can persist in the following sequence
of atomic commits:
Commit 1:
Enable CRTC0 (mode_changed = true), Enable CRTC1 (mode_changed = true)
Commit 2:
Disable CRTC1 (mode_changed = false)
In this sequence we want to keep the exiting CRTC0 but it's not in the
atomic state for the commit since it hasn't been modified. In this case
the stream->mode_changed flag persists as true and we don't re-program
the planes for the existing stream.
[How]
The flag needs to be cleared and it makes the most sense to do it within
DC after the state has been committed. Nothing following dc_commit_state
should think that the stream's mode has changed.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sedat Dilek [Fri, 15 Feb 2019 12:19:20 +0000 (13:19 +0100)]
scsi: fcoe: make use of fip_mode enum complete
[ Upstream commit
8beb90aaf334a6efa3e924339926b5f93a234dbb ]
commit
1917d42d14b7 ("fcoe: use enum for fip_mode") introduces a separate
enum for the fip_mode that shall be used during initialisation handling
until it is passed to fcoe_ctrl_link_up to set the initial fip_state. That
change was incomplete and gcc quietly converted in various places between
the fip_mode and the fip_state enum values with implicit enum conversions,
which fortunately cannot cause any issues in the actual code's execution.
clang however warns about these implicit enum conversions in the scsi
drivers. This commit consolidates the use of the two enums, guided by
clang's enum-conversion warnings.
This commit now completes the use of the fip_mode: It expects and uses
fip_mode in {bnx2fc,fcoe}_interface_create and fcoe_ctlr_init, and it calls
fcoe_ctrl_set_set() with the correct values in fcoe_ctlr_link_up(). It
also breaks the association between FIP_MODE_AUTO and FIP_ST_AUTO to
indicate these two enums are distinct.
Link: https://github.com/ClangBuiltLinux/linux/issues/151
Fixes:
1917d42d14b7 ("fcoe: use enum for fip_mode")
Reported-by: Dmitry Golovin <dima@golovin.in>
Original-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
CC: Lukas Bulwahn <lukas.bulwahn@gmail.com>
CC: Nick Desaulniers <ndesaulniers@google.com>
CC: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Yan [Fri, 15 Feb 2019 11:50:27 +0000 (19:50 +0800)]
scsi: megaraid_sas: return error when create DMA pool failed
[ Upstream commit
bcf3b67d16a4c8ffae0aa79de5853435e683945c ]
when create DMA pool for cmd frames failed, we should return -ENOMEM,
instead of 0.
In some case in:
megasas_init_adapter_fusion()
-->megasas_alloc_cmds()
-->megasas_create_frame_pool
create DMA pool failed,
--> megasas_free_cmds() [1]
-->megasas_alloc_cmds_fusion()
failed, then goto fail_alloc_cmds.
-->megasas_free_cmds() [2]
we will call megasas_free_cmds twice, [1] will kfree cmd_list,
[2] will use cmd_list.it will cause a problem:
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd =
ffffffc000f70000
[
00000000] *pgd=
0000001fbf893003, *pud=
0000001fbf893003,
*pmd=
0000001fbf894003, *pte=
006000006d000707
Internal error: Oops:
96000005 [#1] SMP
Modules linked in:
CPU: 18 PID: 1 Comm: swapper/0 Not tainted
task:
ffffffdfb9290000 ti:
ffffffdfb923c000 task.ti:
ffffffdfb923c000
PC is at megasas_free_cmds+0x30/0x70
LR is at megasas_free_cmds+0x24/0x70
...
Call trace:
[<
ffffffc0005b779c>] megasas_free_cmds+0x30/0x70
[<
ffffffc0005bca74>] megasas_init_adapter_fusion+0x2f4/0x4d8
[<
ffffffc0005b926c>] megasas_init_fw+0x2dc/0x760
[<
ffffffc0005b9ab0>] megasas_probe_one+0x3c0/0xcd8
[<
ffffffc0004a5abc>] local_pci_probe+0x4c/0xb4
[<
ffffffc0004a5c40>] pci_device_probe+0x11c/0x14c
[<
ffffffc00053a5e4>] driver_probe_device+0x1ec/0x430
[<
ffffffc00053a92c>] __driver_attach+0xa8/0xb0
[<
ffffffc000538178>] bus_for_each_dev+0x74/0xc8
[<
ffffffc000539e88>] driver_attach+0x28/0x34
[<
ffffffc000539a18>] bus_add_driver+0x16c/0x248
[<
ffffffc00053b234>] driver_register+0x6c/0x138
[<
ffffffc0004a5350>] __pci_register_driver+0x5c/0x6c
[<
ffffffc000ce3868>] megasas_init+0xc0/0x1a8
[<
ffffffc000082a58>] do_one_initcall+0xe8/0x1ec
[<
ffffffc000ca7be8>] kernel_init_freeable+0x1c8/0x284
[<
ffffffc0008d90b8>] kernel_init+0x1c/0xe4
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sebastian Ott [Thu, 14 Feb 2019 13:46:23 +0000 (14:46 +0100)]
s390/ism: ignore some errors during deregistration
[ Upstream commit
0ff06c44efeede4acd068847d3bf8cf894b6c664 ]
Prior to dma unmap/free operations the ism driver tries to ensure
that the memory is no longer accessed by the HW. When errors
during deregistration of memory regions from the HW occur the ism
driver will not unmap/free this memory.
When we receive notification from the hypervisor that a PCI function
has been detached we can no longer access the device and would never
unmap/free these memory regions which led to complaints by the DMA
debug API.
Treat this kind of errors during the deregistration of memory regions
from the HW as success since it is already ensured that the memory
is no longer accessed by HW.
Reported-by: Karsten Graul <kgraul@linux.ibm.com>
Reported-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ross Lagerwall [Mon, 28 Jan 2019 10:04:24 +0000 (10:04 +0000)]
efi: cper: Fix possible out-of-bounds access
[ Upstream commit
45b14a4ffcc1e0b5caa246638f942cbe7eaea7ad ]
When checking a generic status block, we iterate over all the generic
data blocks. The loop condition only checks that the start of the
generic data block is valid (within estatus->data_length) but not the
whole block. Because the size of data blocks (excluding error data) may
vary depending on the revision and the revision is contained within the
data block, ensure that enough of the current data block is valid before
dereferencing any members otherwise an out-of-bounds access may occur if
estatus->data_length is invalid.
This relies on the fact that struct acpi_hest_generic_data_v300 is a
superset of the earlier version. Also rework the other checks to avoid
potential underflow.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Tyler Baicar <baicar.tyler@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Erwan Velu [Wed, 20 Feb 2019 10:10:17 +0000 (11:10 +0100)]
cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies
[ Upstream commit
1222d527f314c86a3b59a522115d62facc5a7965 ]
There is some rare cases where CPB (and possibly IDA) are missing on
processors.
This is the case fixed by commit
f7f3dc00f612 ("x86/cpu/AMD: Fix
erratum 1076 (CPB bit)") and following.
In such context, the boost status isn't reported by
/sys/devices/system/cpu/cpufreq/boost.
This commit is about printing a message to report that the CPU
doesn't expose the boost capabilities.
This message could help debugging platforms hit by this phenomena.
Signed-off-by: Erwan Velu <e.velu@criteo.com>
[ rjw: Change the message text somewhat ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Tue, 19 Feb 2019 15:46:51 +0000 (16:46 +0100)]
ASoC: qcom: Fix of-node refcount unbalance in qcom_snd_parse_of()
[ Upstream commit
70b773219a32c7b8f3e53e041bc023ad99fd81f4 ]
Although qcom_snd_parse_of() tries to manage the of-node refcount,
there are still a few places that lead to the unblanced refcount in
the error code path. Namely,
- for_each_child_of_node() needs to unreference the iterator node if
aborting the loop in the middle,
- cpu, codec and platform node objects have to be unreferenced at each
iteration,
- platform and codec node objects have to be referred before jumping
to the error handling code that unreference them unconditionally.
This patch tries to address these by moving the assignment of platform
and codec node objects to the beginning of the loop and adding the
of_node_put() calls adequately.
Fixes:
c25e295cd77b ("ASoC: qcom: Add support to parse common audio device nodes")
Cc: Patrick Lai <plai@codeaurora.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Li [Thu, 21 Feb 2019 09:57:16 +0000 (17:57 +0800)]
perf annotate: Fix getting source line failure
[ Upstream commit
11db1ad4513d6205d2519e1a30ff4cef746e3243 ]
The output of "perf annotate -l --stdio xxx" changed since commit
425859ff0de33
("perf annotate: No need to calculate notes->start twice") removed notes->start
assignment in symbol__calc_lines(). It will get failed in
find_address_in_section() from symbol__tty_annotate() subroutine as the
a2l->addr is wrong. So the annotate summary doesn't report the line number of
source code correctly.
Before fix:
liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ cat common_while_1.c
void hotspot_1(void)
{
volatile int i;
for (i = 0; i < 0x10000000; i++);
for (i = 0; i < 0x10000000; i++);
for (i = 0; i < 0x10000000; i++);
}
int main(void)
{
hotspot_1();
return 0;
}
liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ gcc common_while_1.c -g -o common_while_1
liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ sudo ./perf record ./common_while_1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.488 MB perf.data (12498 samples) ]
liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ sudo ./perf annotate -l -s hotspot_1 --stdio
Sorted summary for file /home/liwei/main_code/hulk_work/hulk/tools/perf/common_while_1
----------------------------------------------
19.30 common_while_1[32]
19.03 common_while_1[4e]
19.01 common_while_1[16]
5.04 common_while_1[13]
4.99 common_while_1[4b]
4.78 common_while_1[2c]
4.77 common_while_1[10]
4.66 common_while_1[2f]
4.59 common_while_1[51]
4.59 common_while_1[35]
4.52 common_while_1[19]
4.20 common_while_1[56]
0.51 common_while_1[48]
Percent | Source code & Disassembly of common_while_1 for cycles:ppp (12480 samples, percent: local period)
-----------------------------------------------------------------------------------------------------------------
:
:
:
: Disassembly of section .text:
:
:
00000000000005fa <hotspot_1>:
: hotspot_1():
: void hotspot_1(void)
: {
0.00 : 5fa: push %rbp
0.00 : 5fb: mov %rsp,%rbp
: volatile int i;
:
: for (i = 0; i < 0x10000000; i++);
0.00 : 5fe: movl $0x0,-0x4(%rbp)
0.00 : 605: jmp 610 <hotspot_1+0x16>
0.00 : 607: mov -0x4(%rbp),%eax
common_while_1[10] 4.77 : 60a: add $0x1,%eax
common_while_1[13] 5.04 : 60d: mov %eax,-0x4(%rbp)
common_while_1[16] 19.01 : 610: mov -0x4(%rbp),%eax
common_while_1[19] 4.52 : 613: cmp $0xfffffff,%eax
0.00 : 618: jle 607 <hotspot_1+0xd>
: for (i = 0; i < 0x10000000; i++);
...
After fix:
liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ sudo ./perf record ./common_while_1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.488 MB perf.data (12500 samples) ]
liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ sudo ./perf annotate -l -s hotspot_1 --stdio
Sorted summary for file /home/liwei/main_code/hulk_work/hulk/tools/perf/common_while_1
----------------------------------------------
33.34 common_while_1.c:5
33.34 common_while_1.c:6
33.32 common_while_1.c:7
Percent | Source code & Disassembly of common_while_1 for cycles:ppp (12482 samples, percent: local period)
-----------------------------------------------------------------------------------------------------------------
:
:
:
: Disassembly of section .text:
:
:
00000000000005fa <hotspot_1>:
: hotspot_1():
: void hotspot_1(void)
: {
0.00 : 5fa: push %rbp
0.00 : 5fb: mov %rsp,%rbp
: volatile int i;
:
: for (i = 0; i < 0x10000000; i++);
0.00 : 5fe: movl $0x0,-0x4(%rbp)
0.00 : 605: jmp 610 <hotspot_1+0x16>
0.00 : 607: mov -0x4(%rbp),%eax
common_while_1.c:5 4.70 : 60a: add $0x1,%eax
4.89 : 60d: mov %eax,-0x4(%rbp)
common_while_1.c:5 19.03 : 610: mov -0x4(%rbp),%eax
common_while_1.c:5 4.72 : 613: cmp $0xfffffff,%eax
0.00 : 618: jle 607 <hotspot_1+0xd>
: for (i = 0; i < 0x10000000; i++);
0.00 : 61a: movl $0x0,-0x4(%rbp)
0.00 : 621: jmp 62c <hotspot_1+0x32>
0.00 : 623: mov -0x4(%rbp),%eax
common_while_1.c:6 4.54 : 626: add $0x1,%eax
4.73 : 629: mov %eax,-0x4(%rbp)
common_while_1.c:6 19.54 : 62c: mov -0x4(%rbp),%eax
common_while_1.c:6 4.54 : 62f: cmp $0xfffffff,%eax
...
Signed-off-by: Wei Li <liwei391@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes:
425859ff0de33 ("perf annotate: No need to calculate notes->start twice")
Link: http://lkml.kernel.org/r/20190221095716.39529-1-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Katsuhiro Suzuki [Sun, 10 Feb 2019 15:38:06 +0000 (00:38 +0900)]
clk: fractional-divider: check parent rate only if flag is set
[ Upstream commit
d13501a2bedfbea0983cc868d3f1dc692627f60d ]
Custom approximation of fractional-divider may not need parent clock
rate checking. For example Rockchip SoCs work fine using grand parent
clock rate even if target rate is greater than parent.
This patch checks parent clock rate only if CLK_SET_RATE_PARENT flag
is set.
For detailed example, clock tree of Rockchip I2S audio hardware.
- Clock rate of CPLL is 1.2GHz, GPLL is 491.52MHz.
- i2s1_div is integer divider can divide N (N is 1~128).
Input clock is CPLL or GPLL. Initial divider value is N = 1.
Ex) PLL = CPLL, N = 10, i2s1_div output rate is
CPLL / 10 = 1.2GHz / 10 = 120MHz
- i2s1_frac is fractional divider can divide input to x/y, x and
y are 16bit integer.
CPLL --> | selector | ---> i2s1_div -+--> | selector | --> I2S1 MCLK
GPLL --> | | ,--------------' | |
`--> i2s1_frac ---> | |
Clock mux system try to choose suitable one from i2s1_div and
i2s1_frac for master clock (MCLK) of I2S1.
Bad scenario as follows:
- Try to set MCLK to 8.192MHz (32kHz audio replay)
Candidate setting is
- i2s1_div: GPLL / 60 = 8.192MHz
i2s1_div candidate is exactly same as target clock rate, so mux
choose this clock source. i2s1_div output rate is changed
491.52MHz -> 8.192MHz
- After that try to set to 11.2896MHz (44.1kHz audio replay)
Candidate settings are
- i2s1_div : CPLL / 107 = 11.214945MHz
- i2s1_frac: i2s1_div = 8.192MHz
This is because clk_fd_round_rate() thinks target rate
(11.2896MHz) is higher than parent rate (i2s1_div = 8.192MHz)
and returns parent clock rate.
Above is current upstreamed behavior. Clock mux system choose
i2s1_div, but this clock rate is not acceptable for I2S driver, so
users cannot replay audio.
Expected behavior is:
- Try to set master clock to 11.2896MHz (44.1kHz audio replay)
Candidate settings are
- i2s1_div : CPLL / 107 = 11.214945MHz
- i2s1_frac: i2s1_div * 147/6400 = 11.2896MHz
Change i2s1_div to GPLL / 1 = 491.52MHz at same
time.
If apply this commit, clk_fd_round_rate() calls custom approximate
function of Rockchip even if target rate is higher than parent.
Custom function changes both grand parent (i2s1_div) and parent
(i2s_frac) settings at same time. Clock mux system can choose
i2s1_frac and audio works fine.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
[sboyd@kernel.org: Make function into a macro instead]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Håkon Bugge [Sun, 17 Feb 2019 14:45:12 +0000 (15:45 +0100)]
IB/mlx4: Increase the timeout for CM cache
[ Upstream commit
2612d723aadcf8281f9bf8305657129bd9f3cd57 ]
Using CX-3 virtual functions, either from a bare-metal machine or
pass-through from a VM, MAD packets are proxied through the PF driver.
Since the VF drivers have separate name spaces for MAD Transaction Ids
(TIDs), the PF driver has to re-map the TIDs and keep the book keeping
in a cache.
Following the RDMA Connection Manager (CM) protocol, it is clear when
an entry has to evicted form the cache. But life is not perfect,
remote peers may die or be rebooted. Hence, it's a timeout to wipe out
a cache entry, when the PF driver assumes the remote peer has gone.
During workloads where a high number of QPs are destroyed concurrently,
excessive amount of CM DREQ retries has been observed
The problem can be demonstrated in a bare-metal environment, where two
nodes have instantiated 8 VFs each. This using dual ported HCAs, so we
have 16 vPorts per physical server.
64 processes are associated with each vPort and creates and destroys
one QP for each of the remote 64 processes. That is, 1024 QPs per
vPort, all in all 16K QPs. The QPs are created/destroyed using the
CM.
When tearing down these 16K QPs, excessive CM DREQ retries (and
duplicates) are observed. With some cat/paste/awk wizardry on the
infiniband_cm sysfs, we observe as sum of the 16 vPorts on one of the
nodes:
cm_rx_duplicates:
dreq 2102
cm_rx_msgs:
drep 1989
dreq 6195
rep 3968
req 4224
rtu 4224
cm_tx_msgs:
drep 4093
dreq 27568
rep 4224
req 3968
rtu 3968
cm_tx_retries:
dreq 23469
Note that the active/passive side is equally distributed between the
two nodes.
Enabling pr_debug in cm.c gives tons of:
[171778.814239] <mlx4_ib> mlx4_ib_multiplex_cm_handler: id{slave:
1,sl_cm_id: 0xd393089f} is NULL!
By increasing the CM_CLEANUP_CACHE_TIMEOUT from 5 to 30 seconds, the
tear-down phase of the application is reduced from approximately 90 to
50 seconds. Retries/duplicates are also significantly reduced:
cm_rx_duplicates:
dreq 2460
[]
cm_tx_retries:
dreq 3010
req 47
Increasing the timeout further didn't help, as these duplicates and
retries stems from a too short CMA timeout, which was 20 (~4 seconds)
on the systems. By increasing the CMA timeout to 22 (~17 seconds), the
numbers fell down to about 10 for both of them.
Adjustment of the CMA timeout is not part of this commit.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dongli Zhang [Fri, 22 Feb 2019 14:10:20 +0000 (22:10 +0800)]
loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()
[ Upstream commit
758a58d0bc67457f1215321a536226654a830eeb ]
Commit
0da03cab87e6
("loop: Fix deadlock when calling blkdev_reread_part()") moves
blkdev_reread_part() out of the loop_ctl_mutex. However,
GENHD_FL_NO_PART_SCAN is set before __blkdev_reread_part(). As a result,
__blkdev_reread_part() will fail the check of GENHD_FL_NO_PART_SCAN and
will not rescan the loop device to delete all partitions.
Below are steps to reproduce the issue:
step1 # dd if=/dev/zero of=tmp.raw bs=1M count=100
step2 # losetup -P /dev/loop0 tmp.raw
step3 # parted /dev/loop0 mklabel gpt
step4 # parted -a none -s /dev/loop0 mkpart primary 64s 1
step5 # losetup -d /dev/loop0
Step5 will not be able to delete /dev/loop0p1 (introduced by step4) and
there is below kernel warning message:
[ 464.414043] __loop_clr_fd: partition scan of loop0 failed (rc=-22)
This patch sets GENHD_FL_NO_PART_SCAN after blkdev_reread_part().
Fixes:
0da03cab87e6 ("loop: Fix deadlock when calling blkdev_reread_part()")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vadim Pasternak [Sun, 17 Feb 2019 18:15:30 +0000 (18:15 +0000)]
platform/mellanox: mlxreg-hotplug: Fix KASAN warning
[ Upstream commit
e4c275f77624961b56cce397814d9d770a45ac59 ]
Fix the following KASAN warning produced when booting a 64-bit kernel:
[ 13.334750] BUG: KASAN: stack-out-of-bounds in find_first_bit+0x19/0x70
[ 13.342166] Read of size 8 at addr
ffff880235067178 by task kworker/2:1/42
[ 13.342176] CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 4.20.0-rc1+ #106
[ 13.342179] Hardware name: Mellanox Technologies Ltd. MSN2740/Mellanox x86 SFF board, BIOS 5.6.5 06/07/2016
[ 13.342190] Workqueue: events deferred_probe_work_func
[ 13.342194] Call Trace:
[ 13.342206] dump_stack+0xc7/0x15b
[ 13.342214] ? show_regs_print_info+0x5/0x5
[ 13.342220] ? kmsg_dump_rewind_nolock+0x59/0x59
[ 13.342234] ? _raw_write_lock_irqsave+0x100/0x100
[ 13.351593] print_address_description+0x73/0x260
[ 13.351603] kasan_report+0x260/0x380
[ 13.351611] ? find_first_bit+0x19/0x70
[ 13.351619] find_first_bit+0x19/0x70
[ 13.351630] mlxreg_hotplug_work_handler+0x73c/0x920 [mlxreg_hotplug]
[ 13.351639] ? __lock_text_start+0x8/0x8
[ 13.351646] ? _raw_write_lock_irqsave+0x80/0x100
[ 13.351656] ? mlxreg_hotplug_remove+0x1e0/0x1e0 [mlxreg_hotplug]
[ 13.351663] ? regmap_volatile+0x40/0xb0
[ 13.351668] ? regcache_write+0x4c/0x90
[ 13.351676] ? mlxplat_mlxcpld_reg_write+0x24/0x30 [mlx_platform]
[ 13.351681] ? _regmap_write+0xea/0x220
[ 13.351688] ? __mutex_lock_slowpath+0x10/0x10
[ 13.351696] ? devm_add_action+0x70/0x70
[ 13.351701] ? mutex_unlock+0x1d/0x40
[ 13.351710] mlxreg_hotplug_probe+0x82e/0x989 [mlxreg_hotplug]
[ 13.351723] ? mlxreg_hotplug_work_handler+0x920/0x920 [mlxreg_hotplug]
[ 13.351731] ? sysfs_do_create_link_sd.isra.2+0xf4/0x190
[ 13.351737] ? sysfs_rename_link_ns+0xf0/0xf0
[ 13.351743] ? devres_close_group+0x2b0/0x2b0
[ 13.351749] ? pinctrl_put+0x20/0x20
[ 13.351755] ? acpi_dev_pm_attach+0x2c/0xd0
[ 13.351763] platform_drv_probe+0x70/0xd0
[ 13.351771] really_probe+0x480/0x6e0
[ 13.351778] ? device_attach+0x10/0x10
[ 13.351784] ? __lock_text_start+0x8/0x8
[ 13.351790] ? _raw_write_lock_irqsave+0x80/0x100
[ 13.351797] ? _raw_write_lock_irqsave+0x80/0x100
[ 13.351806] ? __driver_attach+0x190/0x190
[ 13.351812] driver_probe_device+0x17d/0x1a0
[ 13.351819] ? __driver_attach+0x190/0x190
[ 13.351825] bus_for_each_drv+0xd6/0x130
[ 13.351831] ? bus_rescan_devices+0x20/0x20
[ 13.351837] ? __mutex_lock_slowpath+0x10/0x10
[ 13.351845] __device_attach+0x18c/0x230
[ 13.351852] ? device_bind_driver+0x70/0x70
[ 13.351859] ? __mutex_lock_slowpath+0x10/0x10
[ 13.351866] bus_probe_device+0xea/0x110
[ 13.351874] deferred_probe_work_func+0x1c9/0x290
[ 13.351882] ? driver_deferred_probe_add+0x1d0/0x1d0
[ 13.351889] ? preempt_notifier_dec+0x20/0x20
[ 13.351897] ? read_word_at_a_time+0xe/0x20
[ 13.351904] ? strscpy+0x151/0x290
[ 13.351912] ? set_work_pool_and_clear_pending+0x9c/0xf0
[ 13.351918] ? __switch_to_asm+0x34/0x70
[ 13.351924] ? __switch_to_asm+0x40/0x70
[ 13.351929] ? __switch_to_asm+0x34/0x70
[ 13.351935] ? __switch_to_asm+0x40/0x70
[ 13.351942] process_one_work+0x5cc/0xa00
[ 13.351952] ? pwq_dec_nr_in_flight+0x1e0/0x1e0
[ 13.351960] ? pci_mmcfg_check_reserved+0x80/0xb8
[ 13.351967] ? run_rebalance_domains+0x250/0x250
[ 13.351980] ? stack_access_ok+0x35/0x80
[ 13.351986] ? deref_stack_reg+0xa1/0xe0
[ 13.351994] ? schedule+0xcd/0x250
[ 13.352000] ? worker_enter_idle+0x2d6/0x330
[ 13.352006] ? __schedule+0xeb0/0xeb0
[ 13.352014] ? fork_usermode_blob+0x130/0x130
[ 13.352019] ? mutex_lock+0xa7/0x100
[ 13.352026] ? _raw_spin_lock_irq+0x98/0xf0
[ 13.352032] ? _raw_read_unlock_irqrestore+0x30/0x30
[ 13.352037] i2c i2c-2: Added multiplexed i2c bus 11
[ 13.352043] worker_thread+0x181/0xa80
[ 13.352052] ? __switch_to_asm+0x34/0x70
[ 13.352058] ? __switch_to_asm+0x40/0x70
[ 13.352064] ? process_one_work+0xa00/0xa00
[ 13.352070] ? __switch_to_asm+0x34/0x70
[ 13.352076] ? __switch_to_asm+0x40/0x70
[ 13.352081] ? __switch_to_asm+0x34/0x70
[ 13.352086] ? __switch_to_asm+0x40/0x70
[ 13.352092] ? __switch_to_asm+0x34/0x70
[ 13.352097] ? __switch_to_asm+0x40/0x70
[ 13.352105] ? __schedule+0x3d6/0xeb0
[ 13.352112] ? migrate_swap_stop+0x470/0x470
[ 13.352119] ? save_stack+0x89/0xb0
[ 13.352127] ? kmem_cache_alloc_trace+0xe5/0x570
[ 13.352132] ? kthread+0x59/0x1d0
[ 13.352138] ? ret_from_fork+0x35/0x40
[ 13.352154] ? __schedule+0xeb0/0xeb0
[ 13.352161] ? remove_wait_queue+0x150/0x150
[ 13.352169] ? _raw_write_lock_irqsave+0x80/0x100
[ 13.352175] ? __lock_text_start+0x8/0x8
[ 13.352183] ? process_one_work+0xa00/0xa00
[ 13.352188] kthread+0x1a4/0x1d0
[ 13.352195] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 13.352202] ret_from_fork+0x35/0x40
[ 13.353879] The buggy address belongs to the page:
[ 13.353885] page:
ffffea0008d419c0 count:0 mapcount:0 mapping:
0000000000000000 index:0x0
[ 13.353890] flags: 0x2ffff8000000000()
[ 13.353897] raw:
02ffff8000000000 ffffea0008d419c8 ffffea0008d419c8 0000000000000000
[ 13.353903] raw:
0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[ 13.353905] page dumped because: kasan: bad access detected
[ 13.353908] Memory state around the buggy address:
[ 13.353912]
ffff880235067000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 13.353917]
ffff880235067080: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04
[ 13.353921] >
ffff880235067100: f2 f2 f2 f2 f2 f2 f2 04 f2 f2 f2 f2 f2 f2 f2 04
[ 13.353923] ^
[ 13.353927]
ffff880235067180: f2 f2 f2 f2 f2 f2 f2 04 f2 f2 f2 00 00 00 00 00
[ 13.353931]
ffff880235067200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 13.353933] ==================================================================
The warning is caused by the below loop:
for_each_set_bit(bit, (unsigned long *)&asserted, 8) {
while "asserted" is declared as 'unsigned'.
The casting of 32-bit unsigned integer pointer to a 64-bit unsigned long
pointer. There are two problems here.
It causes the access of four extra byte, which can corrupt memory
The 32-bit pointer address may not be 64-bit aligned.
The fix changes variable "asserted" to "unsigned long".
Fixes:
1f976f6978bf ("platform/x86: Move Mellanox platform hotplug driver to platform/mellanox")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Fan [Sat, 19 Jan 2019 11:16:33 +0000 (19:16 +0800)]
platform/x86: ideapad-laptop: Fix no_hw_rfkill_list for Lenovo RESCUER R720-15IKBN
[ Upstream commit
4d9b2864a415fec39150bc13efc730c7eb88711e ]
Commit
ae7c8cba3221 ("platform/x86: ideapad-laptop: add lenovo RESCUER
R720-15IKBN to no_hw_rfkill_list") added
DMI_MATCH(DMI_BOARD_NAME, "80WW")
for Lenovo RESCUER R720-15IKBN.
But DMI_BOARD_NAME does not match 80WW on Lenovo RESCUER R720-15IKBN,
thus cause Wireless LAN still be hard blocked.
On Lenovo RESCUER R720-15IKBN:
~$ cat /sys/class/dmi/id/sys_vendor
LENOVO
~$ cat /sys/class/dmi/id/board_name
Provence-5R3
~$ cat /sys/class/dmi/id/product_name
80WW
~$ cat /sys/class/dmi/id/product_version
Lenovo R720-15IKBN
So on Lenovo RESCUER R720-15IKBN:
DMI_SYS_VENDOR should match "LENOVO",
DMI_BOARD_NAME should match "Provence-5R3",
DMI_PRODUCT_NAME should match "80WW",
DMI_PRODUCT_VERSION should match "Lenovo R720-15IKBN".
Fix it, and in according with other entries in no_hw_rfkill_list,
use DMI_PRODUCT_VERSION instead of DMI_BOARD_NAME.
Fixes:
ae7c8cba3221 ("platform/x86: ideapad-laptop: add lenovo RESCUER R720-15IKBN to no_hw_rfkill_list")
Signed-off-by: Yang Fan <nullptr.cpp@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Fainelli [Fri, 22 Feb 2019 04:09:26 +0000 (20:09 -0800)]
mlxsw: spectrum: Avoid -Wformat-truncation warnings
[ Upstream commit
ab2c4e2581ad32c28627235ff0ae8c5a5ea6899f ]
Give precision identifiers to the two snprintf() formatting the priority
and TC strings to avoid producing these two warnings:
drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function
'mlxsw_sp_port_get_prio_strings':
drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:37: warning: '%d'
directive output may be truncated writing between 1 and 3 bytes into a
region of size between 0 and 31 [-Wformat-truncation=]
snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
^~
drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:3: note: 'snprintf'
output between 3 and 36 bytes into a destination of size 32
snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mlxsw_sp_port_hw_prio_stats[i].str, prio);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function
'mlxsw_sp_port_get_tc_strings':
drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:37: warning: '%d'
directive output may be truncated writing between 1 and 11 bytes into a
region of size between 0 and 31 [-Wformat-truncation=]
snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
^~
drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:3: note: 'snprintf'
output between 3 and 44 bytes into a destination of size 32
snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mlxsw_sp_port_hw_tc_stats[i].str, tc);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Fainelli [Fri, 22 Feb 2019 04:09:28 +0000 (20:09 -0800)]
e1000e: Fix -Wformat-truncation warnings
[ Upstream commit
135e7245479addc6b1f5d031e3d7e2ddb3d2b109 ]
Provide precision hints to snprintf() since we know the destination
buffer size of the RX/TX ring names are IFNAMSIZ + 5 - 1. This fixes the
following warnings:
drivers/net/ethernet/intel/e1000e/netdev.c: In function
'e1000_request_msix':
drivers/net/ethernet/intel/e1000e/netdev.c:2109:13: warning: 'snprintf'
output may be truncated before the last format character
[-Wformat-truncation=]
"%s-rx-0", netdev->name);
^
drivers/net/ethernet/intel/e1000e/netdev.c:2107:3: note: 'snprintf'
output between 6 and 21 bytes into a destination of size 20
snprintf(adapter->rx_ring->name,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(adapter->rx_ring->name) - 1,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%s-rx-0", netdev->name);
~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/e1000e/netdev.c:2125:13: warning: 'snprintf'
output may be truncated before the last format character
[-Wformat-truncation=]
"%s-tx-0", netdev->name);
^
drivers/net/ethernet/intel/e1000e/netdev.c:2123:3: note: 'snprintf'
output between 6 and 21 bytes into a destination of size 20
snprintf(adapter->tx_ring->name,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(adapter->tx_ring->name) - 1,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%s-tx-0", netdev->name);
~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrew Lunn [Sat, 23 Feb 2019 16:43:56 +0000 (17:43 +0100)]
net: dsa: mv88e6xxx: Add lockdep classes to fix false positive splat
[ Upstream commit
f6d9758b12660484b6639364cc406da92a918c96 ]
The following false positive lockdep splat has been observed.
======================================================
WARNING: possible circular locking dependency detected
4.20.0+ #302 Not tainted
------------------------------------------------------
systemd-udevd/160 is trying to acquire lock:
edea6080 (&chip->reg_lock){+.+.}, at: __setup_irq+0x640/0x704
but task is already holding lock:
edff0340 (&desc->request_mutex){+.+.}, at: __setup_irq+0xa0/0x704
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&desc->request_mutex){+.+.}:
mutex_lock_nested+0x1c/0x24
__setup_irq+0xa0/0x704
request_threaded_irq+0xd0/0x150
mv88e6xxx_probe+0x41c/0x694 [mv88e6xxx]
mdio_probe+0x2c/0x54
really_probe+0x200/0x2c4
driver_probe_device+0x5c/0x174
__driver_attach+0xd8/0xdc
bus_for_each_dev+0x58/0x7c
bus_add_driver+0xe4/0x1f0
driver_register+0x7c/0x110
mdio_driver_register+0x24/0x58
do_one_initcall+0x74/0x2e8
do_init_module+0x60/0x1d0
load_module+0x1968/0x1ff4
sys_finit_module+0x8c/0x98
ret_fast_syscall+0x0/0x28
0xbedf2ae8
-> #0 (&chip->reg_lock){+.+.}:
__mutex_lock+0x50/0x8b8
mutex_lock_nested+0x1c/0x24
__setup_irq+0x640/0x704
request_threaded_irq+0xd0/0x150
mv88e6xxx_g2_irq_setup+0xcc/0x1b4 [mv88e6xxx]
mv88e6xxx_probe+0x44c/0x694 [mv88e6xxx]
mdio_probe+0x2c/0x54
really_probe+0x200/0x2c4
driver_probe_device+0x5c/0x174
__driver_attach+0xd8/0xdc
bus_for_each_dev+0x58/0x7c
bus_add_driver+0xe4/0x1f0
driver_register+0x7c/0x110
mdio_driver_register+0x24/0x58
do_one_initcall+0x74/0x2e8
do_init_module+0x60/0x1d0
load_module+0x1968/0x1ff4
sys_finit_module+0x8c/0x98
ret_fast_syscall+0x0/0x28
0xbedf2ae8
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&desc->request_mutex);
lock(&chip->reg_lock);
lock(&desc->request_mutex);
lock(&chip->reg_lock);
&desc->request_mutex refer to two different mutex. #1 is the GPIO for
the chip interrupt. #2 is the chained interrupt between global 1 and
global 2.
Add lockdep classes to the GPIO interrupt to avoid this.
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aaro Koskinen [Sat, 2 Feb 2019 22:14:33 +0000 (00:14 +0200)]
mmc: omap: fix the maximum timeout setting
[ Upstream commit
a6327b5e57fdc679c842588c3be046c0b39cc127 ]
When running OMAP1 kernel on QEMU, MMC access is annoyingly noisy:
MMC: CTO of 0xff and 0xfe cannot be used!
MMC: CTO of 0xff and 0xfe cannot be used!
MMC: CTO of 0xff and 0xfe cannot be used!
[ad inf.]
Emulator warnings appear to be valid. The TI document SPRU680 [1]
("OMAP5910 Dual-Core Processor MultiMedia Card/Secure Data Memory Card
(MMC/SD) Reference Guide") page 36 states that the maximum timeout is 253
cycles and "0xff and 0xfe cannot be used".
Fix by using 0xfd as the maximum timeout.
Tested using QEMU 2.5 (Siemens SX1 machine, OMAP310), and also checked on
real hardware using Palm TE (OMAP310), Nokia 770 (OMAP1710) and Nokia N810
(OMAP2420) that MMC works as before.
[1] http://www.ti.com/lit/ug/spru680/spru680.pdf
Fixes:
730c9b7e6630f ("[MMC] Add OMAP MMC host driver")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qu Wenruo [Thu, 24 Jan 2019 23:55:27 +0000 (07:55 +0800)]
btrfs: qgroup: Make qgroup async transaction commit more aggressive
[ Upstream commit
f5fef4593653dfa2a865c485bb81415de51d5c99 ]
[BUG]
Btrfs qgroup will still hit EDQUOT under the following case:
$ dev=/dev/test/test
$ mnt=/mnt/btrfs
$ umount $mnt &> /dev/null
$ umount $dev &> /dev/null
$ mkfs.btrfs -f $dev
$ mount $dev $mnt -o nospace_cache
$ btrfs subv create $mnt/subv
$ btrfs quota enable $mnt
$ btrfs quota rescan -w $mnt
$ btrfs qgroup limit -e 1G $mnt/subv
$ fallocate -l 900M $mnt/subv/padding
$ sync
$ rm $mnt/subv/padding
# Hit EDQUOT
$ xfs_io -f -c "pwrite 0 512M" $mnt/subv/real_file
[CAUSE]
Since commit
a514d63882c3 ("btrfs: qgroup: Commit transaction in advance
to reduce early EDQUOT"), btrfs is not forced to commit transaction to
reclaim more quota space.
Instead, we just check pertrans metadata reservation against some
threshold and try to do asynchronously transaction commit.
However in above case, the pertrans metadata reservation is pretty small
thus it will never trigger asynchronous transaction commit.
[FIX]
Instead of only accounting pertrans metadata reservation, we calculate
how much free space we have, and if there isn't much free space left,
commit transaction asynchronously to try to free some space.
This may slow down the fs when we have less than 32M free qgroup space,
but should reduce a lot of false EDQUOT, so the cost should be
acceptable.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aneesh Kumar K.V [Tue, 26 Feb 2019 04:39:34 +0000 (10:09 +0530)]
powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback
[ Upstream commit
5330367fa300742a97e20e953b1f77f48392faae ]
After we ALIGN up the address we need to make sure we didn't overflow
and resulted in zero address. In that case, we need to make sure that
the returned address is greater than mmap_min_addr.
This fixes selftest va_128TBswitch --run-hugetlb reporting failures when
run as non root user for
mmap(-1, MAP_HUGETLB)
The bug is that a non-root user requesting address -1 will be given address 0
which will then fail, whereas they should have been given something else that
would have succeeded.
We also avoid the first mmap(-1, MAP_HUGETLB) returning NULL address as mmap address
with this change. So we think this is not a security issue, because it only affects
whether we choose an address below mmap_min_addr, not whether we
actually allow that address to be mapped. ie. there are existing capability
checks to prevent a user mapping below mmap_min_addr and those will still be
honoured even without this fix.
Fixes:
484837601d4d ("powerpc/mm: Add radix support for hugetlb")
Reviewed-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicolas Boichat [Mon, 28 Jan 2019 09:43:01 +0000 (17:43 +0800)]
iommu/io-pgtable-arm-v7s: Only kmemleak_ignore L2 tables
[ Upstream commit
032ebd8548c9d05e8d2bdc7a7ec2fe29454b0ad0 ]
L1 tables are allocated with __get_dma_pages, and therefore already
ignored by kmemleak.
Without this, the kernel would print this error message on boot,
when the first L1 table is allocated:
[ 2.810533] kmemleak: Trying to color unknown object at 0xffffffd652388000 as Black
[ 2.818190] CPU: 5 PID: 39 Comm: kworker/5:0 Tainted: G S 4.19.16 #8
[ 2.831227] Workqueue: events deferred_probe_work_func
[ 2.836353] Call trace:
...
[ 2.852532] paint_ptr+0xa0/0xa8
[ 2.855750] kmemleak_ignore+0x38/0x6c
[ 2.859490] __arm_v7s_alloc_table+0x168/0x1f4
[ 2.863922] arm_v7s_alloc_pgtable+0x114/0x17c
[ 2.868354] alloc_io_pgtable_ops+0x3c/0x78
...
Fixes:
e5fc9753b1a8314 ("iommu/io-pgtable: Add ARMv7 short descriptor support")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sebastian Andrzej Siewior [Wed, 13 Feb 2019 16:14:42 +0000 (17:14 +0100)]
ARM: 8840/1: use a raw_spinlock_t in unwind
[ Upstream commit
74ffe79ae538283bbf7c155e62339f1e5c87b55a ]
Mostly unwind is done with irqs enabled however SLUB may call it with
irqs disabled while creating a new SLUB cache.
I had system freeze while loading a module which called
kmem_cache_create() on init. That means SLUB's __slab_alloc() disabled
interrupts and then
->new_slab_objects()
->new_slab()
->setup_object()
->setup_object_debug()
->init_tracking()
->set_track()
->save_stack_trace()
->save_stack_trace_tsk()
->walk_stackframe()
->unwind_frame()
->unwind_find_idx()
=>spin_lock_irqsave(&unwind_lock);
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lubomir Rintel [Sun, 24 Feb 2019 11:58:02 +0000 (12:58 +0100)]
serial: 8250_pxa: honor the port number from devicetree
[ Upstream commit
fe9ed6d2483fda55465f32924fb15bce0fac3fac ]
Like the other OF-enabled drivers, use the port number from the firmware if
the devicetree specifies an alias:
aliases {
...
serial2 = &uart2; /* Should be ttyS2 */
}
This is how the deprecated pxa.c driver behaved, switching to 8250_pxa
messes up the numbering.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sai Prakash Ranjan [Mon, 25 Feb 2019 17:54:01 +0000 (10:54 -0700)]
coresight: etm4x: Add support to enable ETMv4.2
[ Upstream commit
5666dfd1d8a45a167f0d8b4ef47ea7f780b1f24a ]
SDM845 has ETMv4.2 and can use the existing etm4x driver.
But the current etm driver checks only for ETMv4.0 and
errors out for other etm4x versions. This patch adds this
missing support to enable SoC's with ETMv4x to use same
driver by checking only the ETM architecture major version
number.
Without this change, we get below error during etm probe:
/ # dmesg | grep etm
[ 6.660093] coresight-etm4x: probe of 7040000.etm failed with error -22
[ 6.666902] coresight-etm4x: probe of 7140000.etm failed with error -22
[ 6.673708] coresight-etm4x: probe of 7240000.etm failed with error -22
[ 6.680511] coresight-etm4x: probe of 7340000.etm failed with error -22
[ 6.687313] coresight-etm4x: probe of 7440000.etm failed with error -22
[ 6.694113] coresight-etm4x: probe of 7540000.etm failed with error -22
[ 6.700914] coresight-etm4x: probe of 7640000.etm failed with error -22
[ 6.707717] coresight-etm4x: probe of 7740000.etm failed with error -22
With this change, etm probe is successful:
/ # dmesg | grep etm
[ 6.659198] coresight-etm4x 7040000.etm: CPU0: ETM v4.2 initialized
[ 6.665848] coresight-etm4x 7140000.etm: CPU1: ETM v4.2 initialized
[ 6.672493] coresight-etm4x 7240000.etm: CPU2: ETM v4.2 initialized
[ 6.679129] coresight-etm4x 7340000.etm: CPU3: ETM v4.2 initialized
[ 6.685770] coresight-etm4x 7440000.etm: CPU4: ETM v4.2 initialized
[ 6.692403] coresight-etm4x 7540000.etm: CPU5: ETM v4.2 initialized
[ 6.699024] coresight-etm4x 7640000.etm: CPU6: ETM v4.2 initialized
[ 6.705646] coresight-etm4x 7740000.etm: CPU7: ETM v4.2 initialized
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Tue, 26 Feb 2019 05:38:55 +0000 (22:38 -0700)]
powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc
[ Upstream commit
e7140639b1de65bba435a6bd772d134901141f86 ]
When building with -Wsometimes-uninitialized, Clang warns:
arch/powerpc/xmon/ppc-dis.c:157:7: warning: variable 'opcode' is used
uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
if (cpu_has_feature(CPU_FTRS_POWER9))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/xmon/ppc-dis.c:167:7: note: uninitialized use occurs here
if (opcode == NULL)
^~~~~~
arch/powerpc/xmon/ppc-dis.c:157:3: note: remove the 'if' if its
condition is always true
if (cpu_has_feature(CPU_FTRS_POWER9))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/xmon/ppc-dis.c:132:38: note: initialize the variable
'opcode' to silence this warning
const struct powerpc_opcode *opcode;
^
= NULL
1 warning generated.
This warning seems to make no sense on the surface because opcode is set
to NULL right below this statement. However, there is a comma instead of
semicolon to end the dialect assignment, meaning that the opcode
assignment only happens in the if statement. Properly terminate that
line so that Clang no longer warns.
Fixes:
5b102782c7f4 ("powerpc/xmon: Enable disassembly files (compilation changes)")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masahiro Yamada [Fri, 22 Feb 2019 07:40:10 +0000 (16:40 +0900)]
kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing
[ Upstream commit
9390dff66a52d1a60c6e517d8fa6cdbdffc83cb1 ]
If include/config/auto.conf.cmd is lost for some reasons, it is not
self-healing, so the top Makefile misses to run syncconfig.
Move include/config/auto.conf.cmd to the target side.
I used a pattern rule instead of a normal rule here although it is
a bit gross.
If the rule were written with a normal rule like this,
include/config/auto.conf \
include/config/auto.conf.cmd \
include/config/tristate.conf: $(KCONFIG_CONFIG)
$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
... syncconfig would be executed per target.
Using a pattern rule makes sure that syncconfig is executed just once
because Make assumes the recipe will create all of the targets.
Here is a quote from the GNU Make manual [1]:
"Pattern rules may have more than one target. Unlike normal rules,
this does not act as many different rules with the same prerequisites
and recipe. If a pattern rule has multiple targets, make knows that
the rule's recipe is responsible for making all of the targets. The
recipe is executed only once to make all the targets. When searching
for a pattern rule to match a target, the target patterns of a rule
other than the one that matches the target in need of a rule are
incidental: make worries only about giving a recipe and prerequisites
to the file presently in question. However, when this file's recipe is
run, the other targets are marked as having been updated themselves."
[1]: https://www.gnu.org/software/make/manual/html_node/Pattern-Intro.html
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benjamin Block [Thu, 21 Feb 2019 09:18:00 +0000 (10:18 +0100)]
scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
[ Upstream commit
1749ef00f7312679f76d5e9104c5d1e22a829038 ]
We had a test-report where, under memory pressure, adding LUNs to the
systems would fail (the tests add LUNs strictly in sequence):
[ 5525.853432] scsi 0:0:1:
1088045124: Direct-Access IBM 2107900 .148 PQ: 0 ANSI: 5
[ 5525.853826] scsi 0:0:1:
1088045124: alua: supports implicit TPGS
[ 5525.853830] scsi 0:0:1:
1088045124: alua: device naa.
6005076303ffd32700000000000044da port group 0 rel port 43
[ 5525.853931] sd 0:0:1:
1088045124: Attached scsi generic sg10 type 0
[ 5525.854075] sd 0:0:1:
1088045124: [sdk] Disabling DIF Type 1 protection
[ 5525.855495] sd 0:0:1:
1088045124: [sdk] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[ 5525.855606] sd 0:0:1:
1088045124: [sdk] Write Protect is off
[ 5525.855609] sd 0:0:1:
1088045124: [sdk] Mode Sense: ed 00 00 08
[ 5525.855795] sd 0:0:1:
1088045124: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5525.857838] sdk: sdk1
[ 5525.859468] sd 0:0:1:
1088045124: [sdk] Attached SCSI disk
[ 5525.865073] sd 0:0:1:
1088045124: alua: transition timeout set to 60 seconds
[ 5525.865078] sd 0:0:1:
1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.015070] sd 0:0:1:
1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.015213] sd 0:0:1:
1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.587439] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
[ 5526.588562] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
Looking at the code of scsi_alloc_sdev(), and all the calling contexts,
there seems to be no reason to use GFP_ATMOIC here. All the different
call-contexts use a mutex at some point, and nothing in between that
requires no sleeping, as far as I could see. Additionally, the code that
later allocates the block queue for the device (scsi_mq_alloc_queue())
already uses GFP_KERNEL.
There are similar allocations in two other functions:
scsi_probe_and_add_lun(), and scsi_add_lun(),; that can also be done with
GFP_KERNEL.
Here is the contexts for the three functions so far:
scsi_alloc_sdev()
scsi_probe_and_add_lun()
scsi_sequential_lun_scan()
__scsi_scan_target()
scsi_scan_target()
mutex_lock()
scsi_scan_channel()
scsi_scan_host_selected()
mutex_lock()
scsi_report_lun_scan()
__scsi_scan_target()
...
__scsi_add_device()
mutex_lock()
__scsi_scan_target()
...
scsi_report_lun_scan()
...
scsi_get_host_dev()
mutex_lock()
scsi_probe_and_add_lun()
...
scsi_add_lun()
scsi_probe_and_add_lun()
...
So replace all these, and give them a bit of a better chance to succeed,
with more chances of reclaim.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey Kardashevskiy [Wed, 13 Feb 2019 03:38:18 +0000 (14:38 +1100)]
powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables
[ Upstream commit
11f5acce2fa43b015a8120fa7620fa4efd0a2952 ]
We store 2 multilevel tables in iommu_table - one for the hardware and
one with the corresponding userspace addresses. Before allocating
the tables, the iommu_table_group_ops::get_table_size() hook returns
the combined size of the two and VFIO SPAPR TCE IOMMU driver adjusts
the locked_vm counter correctly. When the table is actually allocated,
the amount of allocated memory is stored in iommu_table::it_allocated_size
and used to decrement the locked_vm counter when we release the memory
used by the table; .get_table_size() and .create_table() calculate it
independently but the result is expected to be the same.
However the allocator does not add the userspace table size to
.it_allocated_size so when we destroy the table because of VFIO PCI
unplug (i.e. VFIO container is gone but the userspace keeps running),
we decrement locked_vm by just a half of size of memory we are
releasing.
To make things worse, since we enabled on-demand allocation of
indirect levels, it_allocated_size contains only the amount of memory
actually allocated at the table creation time which can just be a
fraction. It is not a problem with incrementing locked_vm (as
get_table_size() value is used) but it is with decrementing.
As the result, we leak locked_vm and may not be able to allocate more
IOMMU tables after few iterations of hotplug/unplug.
This sets it_allocated_size in the pnv_pci_ioda2_ops::create_table()
hook to what pnv_pci_ioda2_get_table_size() returns so from now on we
have a single place which calculates the maximum memory a table can
occupy. The original meaning of it_allocated_size is somewhat lost now
though.
We do not ditch it_allocated_size whatsoever here and we do not call
get_table_size() from vfio_iommu_spapr_tce.c when decrementing
locked_vm as we may have multiple IOMMU groups per container and even
though they all are supposed to have the same get_table_size()
implementation, there is a small chance for failure or confusion.
Fixes:
090bad39b237 ("powerpc/powernv: Add indirect levels to it_userspace")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Kocialkowski [Wed, 27 Feb 2019 06:51:36 +0000 (06:51 +0000)]
usb: chipidea: Grab the (legacy) USB PHY by phandle first
[ Upstream commit
68ef236274793066b9ba3154b16c0acc1c891e5c ]
According to the chipidea driver bindings, the USB PHY is specified via
the "phys" phandle node. However, this only takes effect for USB PHYs
that use the common PHY framework. For legacy USB PHYs, a simple lookup
based on the USB PHY type is done instead.
This does not play out well when more than one USB PHY is registered,
since the first registered PHY matching the type will always be
returned regardless of what the driver was bound to.
Fix this by looking up the PHY based on the "phys" phandle node.
Although generic PHYs are rather matched by their "phys-name" and not
the "phys" phandle directly, there is no helper for similar lookup on
legacy PHYs and it's probably not worth the effort to add it.
When no legacy USB PHY is found by phandle, fallback to grabbing any
registered USB2 PHY. This ensures backward compatibility if some users
were actually relying on this mechanism.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Biggers [Sat, 23 Feb 2019 08:23:23 +0000 (00:23 -0800)]
crypto: cavium/zip - fix collision with generic cra_driver_name
[ Upstream commit
41798036430015ad45137db2d4c213cd77fd0251 ]
The cavium/zip implementation of the deflate compression algorithm is
incorrectly being registered under the generic driver name, which
prevents the generic implementation from being registered with the
crypto API when CONFIG_CRYPTO_DEV_CAVIUM_ZIP=y. Similarly the lzs
algorithm (which does not currently have a generic implementation...)
is incorrectly being registered as lzs-generic.
Fix the naming collision by adding a suffix "-cavium" to the
cra_driver_name of the cavium/zip algorithms.
Fixes:
640035a2dc55 ("crypto: zip - Add ThunderX ZIP driver core")
Cc: Mahipal Challa <mahipalreddy2006@gmail.com>
Cc: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Julia Lawall [Sat, 23 Feb 2019 13:20:39 +0000 (14:20 +0100)]
crypto: crypto4xx - add missing of_node_put after of_device_is_available
[ Upstream commit
8c2b43d2d85b48a97d2f8279278a4aac5b45f925 ]
Add an of_node_put when a tested device node is not available.
The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@
e = f(...);
... when != of_node_put(e)
when != x = e
when != e = x
when any
if (<+...of_device_is_available(e)...+>) {
... when != of_node_put(e)
(
return e;
|
+ of_node_put(e);
return ...;
)
}
// </smpl>
Fixes:
5343e674f32fb ("crypto4xx: integrate ppc4xx-rng into crypto4xx")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Fri, 22 Feb 2019 07:15:40 +0000 (15:15 +0800)]
mt76: fix a leaked reference by adding a missing of_node_put
[ Upstream commit
34e022d8b780a03902d82fb3997ba7c7b1f40c81 ]
The call to of_find_node_by_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/net/wireless/mediatek/mt76/eeprom.c:58:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function.
./drivers/net/wireless/mediatek/mt76/eeprom.c:61:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function.
./drivers/net/wireless/mediatek/mt76/eeprom.c:67:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function.
./drivers/net/wireless/mediatek/mt76/eeprom.c:70:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function.
./drivers/net/wireless/mediatek/mt76/eeprom.c:72:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexei Avshalom Lazar [Fri, 22 Feb 2019 14:21:05 +0000 (16:21 +0200)]
wil6210: check null pointer in _wil_cfg80211_merge_extra_ies
[ Upstream commit
de77a53c2d1e8fb3621e63e8e1f0f0c9a1a99ff7 ]
ies1 or ies2 might be null when code inside
_wil_cfg80211_merge_extra_ies access them.
Add explicit check for null and make sure ies1/ies2 are not
accessed in such a case.
spos might be null and be accessed inside
_wil_cfg80211_merge_extra_ies.
Add explicit check for null in the while condition statement
and make sure spos is not accessed in such a case.
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafael J. Wysocki [Thu, 28 Feb 2019 19:56:27 +0000 (13:56 -0600)]
PCI/PME: Fix hotplug/sysfs remove deadlock in pcie_pme_remove()
[ Upstream commit
95c80bc6952b6a5badc7b702d23e5bf14d251e7c ]
Dongdong reported a deadlock triggered by a hotplug event during a sysfs
"remove" operation:
pciehp 0000:00:0c.0:pcie004: Slot(0-1): Link Up
# echo 1 > 0000:00:0c.0/remove
PME and hotplug share an MSI/MSI-X vector. The sysfs "remove" side is:
remove_store
pci_stop_and_remove_bus_device_locked
pci_lock_rescan_remove
pci_stop_and_remove_bus_device
...
pcie_pme_remove
pcie_pme_suspend
synchronize_irq # wait for hotplug IRQ handler
pci_unlock_rescan_remove
The hotplug side is:
pciehp_ist
pciehp_handle_presence_or_link_change
pciehp_configure_device
pci_lock_rescan_remove # wait for pci_unlock_rescan_remove()
INFO: task bash:10913 blocked for more than 120 seconds.
# ps -ax |grep D
PID TTY STAT TIME COMMAND
10913 ttyAMA0 Ds+ 0:00 -bash
14022 ? D 0:00 [irq/745-pciehp]
# cat /proc/14022/stack
__switch_to+0x94/0xd8
pci_lock_rescan_remove+0x20/0x28
pciehp_configure_device+0x30/0x140
pciehp_handle_presence_or_link_change+0x324/0x458
pciehp_ist+0x1dc/0x1e0
# cat /proc/10913/stack
__switch_to+0x94/0xd8
synchronize_irq+0x8c/0xc0
pcie_pme_suspend+0xa4/0x118
pcie_pme_remove+0x20/0x40
pcie_port_remove_service+0x3c/0x58
...
pcie_port_device_remove+0x2c/0x48
pcie_portdrv_remove+0x68/0x78
pci_device_remove+0x48/0x120
...
pci_stop_bus_device+0x84/0xc0
pci_stop_and_remove_bus_device_locked+0x24/0x40
remove_store+0xa4/0xb8
dev_attr_store+0x44/0x60
sysfs_kf_write+0x58/0x80
It is incorrect to call pcie_pme_suspend() from pcie_pme_remove() for two
reasons.
First, pcie_pme_suspend() calls synchronize_irq(), which will wait for the
native hotplug interrupt handler as well as for the PME one, because they
share one IRQ (as per the spec). That may deadlock if hotplug is signaled
while pcie_pme_remove() is running and the latter calls
pci_lock_rescan_remove() before the former.
Second, if pcie_pme_suspend() figures out that wakeup needs to be enabled
for the port, it will return without disabling the interrupt as expected by
pcie_pme_remove() which was overlooked by commit
c7b5a4e6e8fb ("PCI / PM:
Fix native PME handling during system suspend/resume").
To fix that, rework pcie_pme_remove() to disable the PME interrupt, clear
its status and prevent the PME worker function from re-enabling it before
calling free_irq() on it, which should be sufficient.
Fixes:
c7b5a4e6e8fb ("PCI / PM: Fix native PME handling during system suspend/resume")
Link: https://lore.kernel.org/linux-pci/c7697e7c-e1af-13e4-8491-0a3996e6ab5d@huawei.com
Reported-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[bhelgaas: add URL and deadlock details from Dongdong]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Jones [Thu, 28 Feb 2019 01:55:32 +0000 (17:55 -0800)]
tools lib traceevent: Fix buffer overflow in arg_eval
[ Upstream commit
7c5b019e3a638a5a290b0ec020f6ca83d2ec2aaa ]
Fix buffer overflow observed when running perf test.
The overflow is when trying to evaluate "1ULL << (64 - 1)" which is
resulting in -
9223372036854775808 which overflows the 20 character
buffer.
If is possible this bug has been reported before but I still don't see
any fix checked in:
See: https://www.spinics.net/lists/linux-perf-users/msg07714.html
Reported-by: Michael Sartain <mikesart@fastmail.com>
Reported-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Fixes:
f7d82350e597 ("tools/events: Add files to create libtraceevent.a")
Link: http://lkml.kernel.org/r/20190228015532.8941-1-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Carlos Maiolino [Tue, 26 Feb 2019 10:51:50 +0000 (11:51 +0100)]
fs: fix guard_bio_eod to check for real EOD errors
[ Upstream commit
dce30ca9e3b676fb288c33c1f4725a0621361185 ]
guard_bio_eod() can truncate a segment in bio to allow it to do IO on
odd last sectors of a device.
It already checks if the IO starts past EOD, but it does not consider
the possibility of an IO request starting within device boundaries can
contain more than one segment past EOD.
In such cases, truncated_bytes can be bigger than PAGE_SIZE, and will
underflow bvec->bv_len.
Fix this by checking if truncated_bytes is lower than PAGE_SIZE.
This situation has been found on filesystems such as isofs and vfat,
which doesn't check the device size before mount, if the device is
smaller than the filesystem itself, a readahead on such filesystem,
which spans EOD, can trigger this situation, leading a call to
zero_user() with a wrong size possibly corrupting memory.
I didn't see any crash, or didn't let the system run long enough to
check if memory corruption will be hit somewhere, but adding
instrumentation to guard_bio_end() to check truncated_bytes size, was
enough to see the error.
The following script can trigger the error.
MNT=/mnt
IMG=./DISK.img
DEV=/dev/loop0
mkfs.vfat $IMG
mount $IMG $MNT
cp -R /etc $MNT &> /dev/null
umount $MNT
losetup -D
losetup --find --show --sizelimit
16247280 $IMG
mount $DEV $MNT
find $MNT -type f -exec cat {} + >/dev/null
Kudos to Eric Sandeen for coming up with the reproducer above
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
luojiajun [Fri, 1 Mar 2019 05:30:00 +0000 (00:30 -0500)]
jbd2: fix invalid descriptor block checksum
[ Upstream commit
6e876c3dd205d30b0db6850e97a03d75457df007 ]
In jbd2_journal_commit_transaction(), if we are in abort mode,
we may flush the buffer without setting descriptor block checksum
by goto start_journal_io. Then fs is mounted,
jbd2_descriptor_block_csum_verify() failed.
[ 271.379811] EXT4-fs (vdd): shut down requested (2)
[ 271.381827] Aborting journal on device vdd-8.
[ 271.597136] JBD2: Invalid checksum recovering block 22199 in log
[ 271.598023] JBD2: recovery failed
[ 271.598484] EXT4-fs (vdd): error loading journal
Fix this problem by keep setting descriptor block checksum if the
descriptor buffer is not NULL.
This checksum problem can be reproduced by xfstests generic/388.
Signed-off-by: luojiajun <luojiajun3@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Westphal [Thu, 21 Feb 2019 16:09:31 +0000 (17:09 +0100)]
netfilter: conntrack: tcp: only close if RST matches exact sequence
[ Upstream commit
be0502a3f2e94211a8809a09ecbc3a017189b8fb ]
TCP resets cause instant transition from established to closed state
provided the reset is in-window. Endpoints that implement RFC 5961
require resets to match the next expected sequence number.
RST segments that are in-window (but that do not match RCV.NXT) are
ignored, and a "challenge ACK" is sent back.
Main problem for conntrack is that its a middlebox, i.e. whereas an end
host might have ACK'd SEQ (and would thus accept an RST with this
sequence number), conntrack might not have seen this ACK (yet).
Therefore we can't simply flag RSTs with non-exact match as invalid.
This updates RST processing as follows:
1. If the connection is in a state other than ESTABLISHED, nothing is
changed, RST is subject to normal in-window check.
2. If the RSTs sequence number either matches exactly RCV.NXT,
connection state moves to CLOSE.
3. The same applies if the RST sequence number aligns with a previous
packet in the same direction.
In all other cases, the connection remains in ESTABLISHED state.
If the normal-in-window check passes, the timeout will be lowered
to that of CLOSE.
If the peer sends a challenge ack, connection timeout will be reset.
If the challenge ACK triggers another RST (RST was valid after all),
this 2nd RST will match expected sequence and conntrack state changes to
CLOSE.
If no challenge ACK is received, the connection will time out after
CLOSE seconds (10 seconds by default), just like without this patch.
Packetdrill test case:
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
0.000 bind(3, ..., ...) = 0
0.000 listen(3, 1) = 0
0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7>
0.100 > S. 0:0(0) ack 1 win 64240 <mss 1460,nop,nop,sackOK,nop,wscale 7>
0.200 < . 1:1(0) ack 1 win 257
0.200 accept(3, ..., ...) = 4
// Receive a segment.
0.210 < P. 1:1001(1000) ack 1 win 46
0.210 > . 1:1(0) ack 1001
// Application writes 1000 bytes.
0.250 write(4, ..., 1000) = 1000
0.250 > P. 1:1001(1000) ack 1001
// First reset, old sequence. Conntrack (correctly) considers this
// invalid due to failed window validation (regardless of this patch).
0.260 < R 2:2(0) ack 1001 win 260
// 2nd reset, but too far ahead sequence. Same: correctly handled
// as invalid.
0.270 < R
99990001:
99990001(0) ack 1001 win 260
// in-window, but not exact sequence.
// Current Linux kernels might reply with a challenge ack, and do not
// remove connection.
// Without this patch, conntrack state moves to CLOSE.
// With patch, timeout is lowered like CLOSE, but connection stays
// in ESTABLISHED state.
0.280 < R 1010:1010(0) ack 1001 win 260
// Expect challenge ACK
0.281 > . 1001:1001(0) ack 1001 win 501
// With or without this patch, RST will cause connection
// to move to CLOSE (sequence number matches)
// 0.282 < R 1001:1001(0) ack 1001 win 260
// ACK
0.300 < . 1001:1001(0) ack 1001 win 257
// more data could be exchanged here, connection
// is still established
// Client closes the connection.
0.610 < F. 1001:1001(0) ack 1001 win 260
0.650 > . 1001:1001(0) ack 1002
// Close the connection without reading outstanding data
0.700 close(4) = 0
// so one more reset. Will be deemed acceptable with patch as well:
// connection is already closing.
0.701 > R. 1001:1001(0) ack 1002 win 501
// End packetdrill test case.
With patch, this generates following conntrack events:
[NEW] 120 SYN_SENT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [UNREPLIED]
[UPDATE] 60 SYN_RECV src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80
[UPDATE] 432000 ESTABLISHED src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
[UPDATE] 120 FIN_WAIT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
[UPDATE] 60 CLOSE_WAIT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
[UPDATE] 10 CLOSE src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
Without patch, first RST moves connection to close, whereas socket state
does not change until FIN is received.
[NEW] 120 SYN_SENT src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [UNREPLIED]
[UPDATE] 60 SYN_RECV src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80
[UPDATE] 432000 ESTABLISHED src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [ASSURED]
[UPDATE] 10 CLOSE src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [ASSURED]
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Li RongQing [Tue, 26 Feb 2019 09:13:56 +0000 (17:13 +0800)]
netfilter: nf_tables: check the result of dereferencing base_chain->stats
[ Upstream commit
a9f5e78c403d2d62ade4f4c85040efc85f4049b8 ]
Check the result of dereferencing base_chain->stats, instead of result
of this_cpu_ptr with NULL.
base_chain->stats maybe be changed to NULL when a chain is updated and a
new NULL counter can be attached.
And we do not need to check returning of this_cpu_ptr since
base_chain->stats is from percpu allocator if it is non-NULL,
this_cpu_ptr returns a valid value.
And fix two sparse error by replacing rcu_access_pointer and
rcu_dereference with READ_ONCE under rcu_read_lock.
Thanks for Eric's help to finish this patch.
Fixes:
009240940e84c1 ("netfilter: nf_tables: don't assume chain stats are set when jumplabel is set")
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi3.git / log