Laurent Vivier [Mon, 17 Oct 2016 10:30:24 +0000 (12:30 +0200)]
tests: enable virtio tests on SPAPR
but disable MSI-X tests on SPAPR as we can't check the result
(the memory region used on PC is not readable on SPAPR).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Laurent Vivier [Mon, 17 Oct 2016 10:30:23 +0000 (12:30 +0200)]
tests: use qtest_pc_boot()/qtest_shutdown() in virtio tests
This patch replaces calls to qtest_start() and qtest_end() by
calls to qtest_pc_boot() and qtest_shutdown().
This allows to initialize memory allocator and PCI interface
functions. This will ease to enable virtio tests on other
architectures by only adding a specific qtest_XXX_boot() (like
qtest_spapr_boot()).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Laurent Vivier [Mon, 17 Oct 2016 10:30:22 +0000 (12:30 +0200)]
tests: rename target_big_endian() as qvirtio_is_big_endian()
Move the definition to libqos/virtio.h as it must be used
only with virtio functions.
Add a QVirtioDevice parameter as it will be needed to
know if the virtio device is using virtio 1.0 specification
and thus is always little-endian (to do)
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Laurent Vivier [Mon, 17 Oct 2016 10:30:21 +0000 (12:30 +0200)]
tests: move QVirtioBus pointer into QVirtioDevice
This allows to not have to pass bus and device for every virtio functions.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[dwg: Fix style nit]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Laurent Vivier [Mon, 17 Oct 2016 10:30:20 +0000 (12:30 +0200)]
tests: don't check if qtest_spapr_boot() returns NULL
qtest_spapr_boot()/qtest_pc_boot()/qtest_boot() call qtest_vboot()
and qtest_vboot() calls g_malloc(),
and g_malloc() never fails:
if memory allocation fails, the application is terminated.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Laurent Vivier [Mon, 17 Oct 2016 10:30:19 +0000 (12:30 +0200)]
tests: fix memory leak in virtio-scsi-test
vs is allocated in qvirtio_scsi_pci_init() and never freed.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Mon, 17 Oct 2016 20:33:14 +0000 (22:33 +0200)]
ppc/xics: Add xics to the monitor "info pic" command
Useful to debug interrupt problems.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: - updated for qemu-2.7
- added a test on ->irqs as it is not necessarily allocated
(PHB3_MSI)
- removed static variable g_xics and replace with a loop on all
children to find the xics objects.
- rebased on InterruptStatsProvider interface ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Alexey Kardashevskiy [Tue, 18 Oct 2016 23:05:26 +0000 (10:05 +1100)]
pseries: Update SLOF firmware image to
20161019
The main changes are:
* virtio-serial
* booting speed imrovement
* better PCI bridge support
The complete changelog is:
> virtio-serial: Fix compile error
> scsi: Remove debug functions from scsi-loader.fs
> scsi: Remove unused read-6 command
> obp-tftp: Remove the ciregs-buffer
> libnet: Simplify the net-load arguments passing
> libnet: Simplify the Forth-to-C wrapper of ping()
> Do not link libnet to net-snk anymore, and remove net-snk from board-qemu
> Add a Forth-to-C wrapper for the ping command, too
> Link libnet code to Paflof and add a wrapper for netboot()
> Remember execution tokens of "write" and "read" for socket operations
> Add virtio-serial device support
> Generalize output banner write routine
> Improve indentation in OF.fs
> scsi: implement READ (16) command
> rtas: Improve rtas-do-config-@ and rtas-do-config-! a little bit
> libnet: Make netapps.h includable from .code files
> libnet: Remove unused prototypes from netapps.h
> libnet: Fix the printout of the ping command
> libnet: Make sure to close sockets when we're done
> scsi: implement read-capacity-16
> pci: Fix secondary and subordinate PCI bus enumeration with board-qemu
> pci-phb: Fix stack underflow in phb-pci-walk-bridge
> paflof: Add a read() function to read keyboard input
> paflof: Add socket(), send() and recv() functions to paflof
> paflof: Provide get_timer() and set_timer() helper functions
> paflof: Add a write_mm_log helper function
> paflof: Copy sbrk code from net-snk
> paflof: Use CFLAGS from make.rules instead of completely redefining them
> Do not include the FCode evaluator by default anymore
> Source code beautification of board-qemu/slof/pci-interrupts.fs
> Allow PCI devices in PCI bridge slots greater than 4
> Fix bad interrupt pin numbering in interrupt-map property of PCI bridges
> Improve SLOF_alloc_mem_aligned()
> instance: Fix set-my-args for empty arguments
> Fix remaining compiler warnings in sloffs.c
> Remove misleading padding fields from ROM header definition
> Improve indentation in calculatecrc.h
> Do not include calculatecrc.h from assembler files
> Remove unused defines in calculatecrc.h
> libnet: Re-initialize global variables at the beginning of tftp()
> Remove dependency on cpu/@0 for booting
> usb: Set XHCI slot speed according to port status
> usb: Build correct route string for USB3 devices behind a hub
> usb: Initialize USB3 devices on a hub and keep track of hub topology
> usb: Increase amount of maximum slot IDs and add a sanity check
> usb: Move XHCI port state arrays from header to .c file
> tools: add copy functionality
> tools: added support to sloffs to read from /dev/slof_flash
> tools: added file append functionality
> tools: use crc checking code from romfs/tools
> tools: added initial version of sloffs
> romfs: factored out crc code, to make it usable from other locations
> tools: remove unused parts from the Makefile
> usb-hid: Fix non-working comma key
> fat-files: Fix access to FAT32 dir/files when cluster > 16-bits
> virtio-net: fix ring handling in receive
> net: Remove remainders of the MTFTP code
> net: Move also files from clients/net-snk/app/netapps/ to lib/libnet/
> net: Move files from clients/net-snk/app/netlib/ to lib/libnet/
> net-snk: Get rid of netlib and netapps prefixes in include statements
> usb-xhci: assign field4 before conditional
> Improve F12 key handling in boot menu
> Fix stack underflow that occurs with duplicated ESC in input
> rtas-nvram: optimize erase
> ipv6: Replace magic number 1500 with ETH_MTU_SIZE (i.e. 1518)
> ipv6: Fix NULL pointer dereference in ip6addr_add()
> ipv6: Fix memory leak in set_ipv6_address() / ip6_create_ll_address()
> ipv6: Clear memory after malloc if necessary
> ipv6: Fix possible NULL-pointer dereference in send_ipv6()
> ping: use gateway address for routing
> ping: add netmask in the ping argument
> xhci: fix missing keys from keyboard
> xhci: add memory barrier after filling the trb
> loaders: Remove netflash command
> boot: Remove legacy Forth words for network loading
> base: Move cnt-bits and bcd-to-bin to board-js2x folder
> base: Move huge-tftp-load variable to obp-tftp package
> base: Remove unused IP address conversion functions
> virtio: White space cleanup in virtio-9p.c
> virtio: Add modern version 1.0 support to 9p driver
> virtio: Set a proper name for virtio-9p device tree nodes
> pci: Fix mistype in "unkown-bridge"
> ipv6: Indent code with tabs, not with spaces
> ipv6: send_ipv6() has to return after doing NDP
> ipv6: Do not use unitialized MAC address array
> ipv6: Add support for sending packets through a router
> Remove unused sms code.
> virtio-net: initialize to populate mac address
> libbootmsg: Do not use '\b' characters when printing checkpoints
> dev-null: The "read" function has to return 0 if nothing has been read
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Peter Maydell [Thu, 27 Oct 2016 16:24:29 +0000 (17:24 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-audio-
20161027-1' into staging
audio: intel-hda: check stream entry count during transfer
# gpg: Signature made Thu 27 Oct 2016 15:30:51 BST
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/pull-audio-
20161027-1:
audio: intel-hda: check stream entry count during transfer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 27 Oct 2016 13:06:34 +0000 (14:06 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/pull-atomic-
20161026' into staging
cmpxchg emulation of atomics, v8
# gpg: Signature made Wed 26 Oct 2016 16:30:03 BST
# gpg: using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg: aka "Richard Henderson <rth@redhat.com>"
# gpg: aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B
* remotes/rth/tags/pull-atomic-
20161026: (37 commits)
target-alpha: Emulate LL/SC using cmpxchg helpers
target-alpha: Introduce MMU_PHYS_IDX
target-arm: remove EXCP_STREX + cpu_exclusive_{test, info}
linux-user: remove handling of aarch64's EXCP_STREX
linux-user: remove handling of ARM's EXCP_STREX
target-arm: emulate aarch64's LL/SC using cmpxchg helpers
target-arm: emulate SWP with atomic_xchg helper
target-arm: emulate LL/SC using cmpxchg helpers
target-arm: Rearrange aa32 load and store functions
tests: add atomic_add-bench
target-i386: remove helper_lock()
target-i386: emulate XCHG using atomic helper
target-i386: emulate LOCK'ed BTX ops using atomic helpers
target-i386: emulate LOCK'ed XADD using atomic helper
target-i386: emulate LOCK'ed NEG using cmpxchg helper
target-i386: emulate LOCK'ed NOT using atomic helper
target-i386: emulate LOCK'ed INC using atomic helper
target-i386: emulate LOCK'ed OP instructions using atomic helpers
target-i386: emulate LOCK'ed cmpxchg using cmpxchg helpers
tcg: Emit barriers with parallel_cpus
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 27 Oct 2016 11:45:45 +0000 (12:45 +0100)]
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Wed 26 Oct 2016 03:19:06 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
colo-proxy: fix memory leak
net: rtl8139: limit processing of ring descriptors
net: vmxnet: initialise local tx descriptor
e1000e: Don't zero out buffer address in rx descriptor
net: rocker: set limit to DMA buffer size
net: eepro100: fix memory leak in device uninit
tap-bsd: OpenBSD uses tap(4) now
net: pcnet: fix source formatting and indentation
net: pcnet: check rx/tx descriptor ring length
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 27 Oct 2016 10:58:43 +0000 (11:58 +0100)]
Merge remote-tracking branch 'remotes/vivier/tags/m68k-part1-pull-request' into staging
# gpg: Signature made Tue 25 Oct 2016 19:58:46 BST
# gpg: using RSA key 0xF30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier/tags/m68k-part1-pull-request: (23 commits)
target-m68k: Optimize gen_flush_flags
target-m68k: Optimize some comparisons
target-m68k: Use setcond for scc
target-m68k: Introduce DisasCompare
target-m68k: Reorg flags handling
target-m68k: Remove incorrect clearing of cc_x
target-m68k: Some fixes to SR and flags management
target-m68k: Print flags properly
target-m68k: update CPU flags management
target-m68k: don't update cc_dest in helpers
target-m68k: update move to/from ccr/sr
target-m68k: remove m68k_cpu_exec_enter() and m68k_cpu_exec_exit()
target-m68k: Replace helper_xflag_lt with setcond
target-m68k: allow to update flags with operation on words and bytes
target-m68k: REG() macro cleanup
target-m68k: set PAGE_BITS to 12 for m68k
target-m68k: define operand sizes
target-m68k: set disassembler mode to 680x0 or coldfire
target-m68k: introduce read_imXX() functions
target-m68k: manage scaled index
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 2 Sep 2016 19:52:28 +0000 (12:52 -0700)]
target-alpha: Emulate LL/SC using cmpxchg helpers
Emulating LL/SC with cmpxchg is not correct, since it can
suffer from the ABA problem. However, portable parallel
code is written assuming only cmpxchg which means that in
practice this is a viable alternative.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Sat, 3 Sep 2016 18:32:35 +0000 (11:32 -0700)]
target-alpha: Introduce MMU_PHYS_IDX
Rather than using helpers for physical accesses, use a mmu index.
The primary cleanup is with store-conditional on physical addresses.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Emilio G. Cota [Mon, 27 Jun 2016 19:02:16 +0000 (15:02 -0400)]
target-arm: remove EXCP_STREX + cpu_exclusive_{test, info}
The exception is not emitted anymore; remove it and the associated
TCG variables.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <
1467054136-10430-31-git-send-email-cota@braap.org>
Emilio G. Cota [Mon, 27 Jun 2016 19:02:15 +0000 (15:02 -0400)]
linux-user: remove handling of aarch64's EXCP_STREX
The exception is not emitted anymore.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <
1467054136-10430-30-git-send-email-cota@braap.org>
Emilio G. Cota [Mon, 27 Jun 2016 19:02:14 +0000 (15:02 -0400)]
linux-user: remove handling of ARM's EXCP_STREX
The exception is not emitted anymore.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twidle.net>
Message-Id: <
1467054136-10430-29-git-send-email-cota@braap.org>
Emilio G. Cota [Mon, 27 Jun 2016 19:02:13 +0000 (15:02 -0400)]
target-arm: emulate aarch64's LL/SC using cmpxchg helpers
Emulating LL/SC with cmpxchg is not correct, since it can
suffer from the ABA problem. Portable parallel code, however,
is written assuming only cmpxchg--and not LL/SC--is available.
This means that in practice emulating LL/SC with cmpxchg is
a viable alternative.
The appended emulates LL/SC pairs in aarch64 with cmpxchg helpers.
This works in both user and system mode. In usermode, it avoids
pausing all other CPUs to perform the LL/SC pair. The subsequent
performance and scalability improvement is significant, as the
plots below show. They plot the throughput of atomic_add-bench
compiled for ARM and executed on a 64-core x86 machine.
Hi-res plots: http://imgur.com/a/JVc8Y
atomic_add-bench: 1000000 ops/thread, [0,1] range
18 ++---------+----------+---------+----------+----------+----------+---++
+cmpxchg +-E--+ + + + + + |
16 ++master +-H--+ ++
|| |
14 ++ ++
| | |
12 ++| ++
| | |
10 ++++ ++
8 ++E ++
|+++ |
6 ++ | ++
| | |
4 ++ | ++
| | |
2 +H++E+--- ++
+ | +E++----+E+---+--+E+----++E+------+E+------+E++----+E+---+--+E|
0 ++H-H----H-+-----H----+---------+----------+----------+----------+---++
0 10 20 30 40 50 60
Number of threads
atomic_add-bench: 1000000 ops/thread, [0,2] range
18 ++---------+----------+---------+----------+----------+----------+---++
+cmpxchg +-E--+ + + + + + |
16 ++master +-H--+ ++
| | |
14 ++E ++
| | |
12 ++| ++
|+++ |
10 ++ | ++
8 ++ | ++
| | |
6 ++ | ++
| | |
4 ++ | ++
| +E+--- |
2 +H+ +E+-----+++ +++ +++ ---+E+-----+E+------+++
+++ + +E+---+--+E+----++E+------+E+--- ++++ +++ + +E|
0 ++H-H----H-+-----H----+---------+----------+----------+----------+---++
0 10 20 30 40 50 60
Number of threads
atomic_add-bench: 1000000 ops/thread, [0,128] range
70 ++---------+----------+---------+----------+----------+----------+---++
+cmpxchg +-E--+ + + + + + |
60 ++master +-H--+ +++ ---+E+-----+E+------+E+
| +E+------E-------+E+--- |
| --- +++ |
50 ++ +++--- ++
| -+E+ |
40 ++ +++---- ++
| E- |
| --| |
30 ++ -- +++ ++
| +E+ |
20 ++E+ ++
|E+ |
| |
10 ++ ++
+ + + + + + + |
0 +HH-H----H-+-----H----+---------+----------+----------+----------+---++
0 10 20 30 40 50 60
Number of threads
atomic_add-bench: 1000000 ops/thread, [0,1024] range
160 ++---------+---------+----------+---------+----------+----------+---++
+cmpxchg +-E--+ + + + + + |
140 ++master +-H--+ +++ +++
| -+E+-----+E+-------E|
120 ++ +++ ---- +++
| +++ ----E-- |
100 ++ --E--- +++ ++
| +++ ---- +++ |
80 ++ --E-- ++
| ---- +++ |
| -+E+ |
60 ++ ---- +++ ++
| +E+- |
40 ++ -- ++
| +E+ |
20 +EE+ ++
+++ + + + + + + |
0 +HH-H---H--+-----H---+----------+---------+----------+----------+---++
0 10 20 30 40 50 60
Number of threads
[rth: Rearrange 128-bit cmpxchg helper. Enforce alignment on LL.]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <
1467054136-10430-28-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Emilio G. Cota [Mon, 27 Jun 2016 19:02:10 +0000 (15:02 -0400)]
target-arm: emulate SWP with atomic_xchg helper
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <
1467054136-10430-25-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Emilio G. Cota [Mon, 27 Jun 2016 19:02:08 +0000 (15:02 -0400)]
target-arm: emulate LL/SC using cmpxchg helpers
Emulating LL/SC with cmpxchg is not correct, since it can
suffer from the ABA problem. Portable parallel code, however,
is written assuming only cmpxchg--and not LL/SC--is available.
This means that in practice emulating LL/SC with cmpxchg is
a viable alternative.
The appended emulates LL/SC pairs in ARM with cmpxchg helpers.
This works in both user and system mode. In usermode, it avoids
pausing all other CPUs to perform the LL/SC pair. The subsequent
performance and scalability improvement is significant, as the
plots below show. They plot the throughput of atomic_add-bench
compiled for ARM and executed on a 64-core x86 machine.
Hi-res plots: http://imgur.com/a/aNQpB
atomic_add-bench: 1000000 ops/thread, [0,1] range
9 ++---------+----------+----------+----------+----------+----------+---++
+cmpxchg +-E--+ + + + + + |
8 +Emaster +-H--+ ++
| | |
7 ++E ++
| | |
6 ++++ ++
| | |
5 ++ | ++
4 ++ | ++
| | |
3 ++ | ++
| | |
2 ++ | ++
|H++E+--- +++ ---+E+------+E+------+E|
1 +++ +E+-----+E+------+E+------+E+------+E+-- +++ +++ ++
++H+ + +++ + +++ ++++ + + + |
0 ++--H----H-+-----H----+----------+----------+----------+----------+---++
0 10 20 30 40 50 60
Number of threads
atomic_add-bench: 1000000 ops/thread, [0,2] range
16 ++---------+----------+---------+----------+----------+----------+---++
+cmpxchg +-E--+ + + + + + |
14 ++master +-H--+ ++
| | |
12 ++| ++
| E |
10 ++| ++
| | |
8 ++++ ++
|E+| |
| | |
6 ++ | ++
| | |
4 ++ | ++
| +E+--- +++ +++ +++ ---+E+------+E|
2 +H+ +E+------E-------+E+-----+E+------+E+------+E+-- +++
+ | + +++ + ++++ + + + |
0 ++H-H----H-+-----H----+---------+----------+----------+----------+---++
0 10 20 30 40 50 60
Number of threads
atomic_add-bench: 1000000 ops/thread, [0,128] range
70 ++---------+----------+---------+----------+----------+----------+---++
+cmpxchg +-E--+ + + + ++++ + |
60 ++master +-H--+ ----E------+E+-------++
| -+E+--- +++ +++ +E|
| +++ ---- +++ ++|
50 ++ +++ ---+E+- ++
| -E--- |
40 ++ ---+++ ++
| +++--- |
| -+E+ |
30 ++ +++---- ++
| +E+ |
20 ++ +++-- ++
| +E+ |
|+E+ |
10 +E+ ++
+ + + + + + + |
0 +HH-H----H-+-----H----+---------+----------+----------+----------+---++
0 10 20 30 40 50 60
Number of threads
atomic_add-bench: 1000000 ops/thread, [0,1024] range
120 ++---------+---------+----------+---------+----------+----------+---++
+cmpxchg +-E--+ + + + + + |
| master +-H--+ ++|
100 ++ ----E+
| +++ ---+E+--- ++|
| --E--- +++ |
80 ++ ---- +++ ++
| ---+E+- |
60 ++ -+E+-- ++
| +++ ---- +++ |
| -+E+- |
40 ++ +++---- ++
| +++ ---+E+ |
| -+E+--- |
20 ++ +E+ ++
|+E+++ |
+E+ + + + + + + |
0 +HH-H---H--+-----H---+----------+---------+----------+----------+---++
0 10 20 30 40 50 60
Number of threads
[rth: Enforce alignment for ldrexd.]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <
1467054136-10430-23-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 30 Jun 2016 18:44:14 +0000 (11:44 -0700)]
target-arm: Rearrange aa32 load and store functions
Stop specializing on TARGET_LONG_BITS == 32; unconditionally allocate
a temp and expand with tcg_gen_extu_i32_tl. Split out gen_aa32_addr,
gen_aa32_frob64, gen_aa32_ld_i32 and gen_aa32_st_i32 as separate interfaces.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Emilio G. Cota [Mon, 27 Jun 2016 19:02:05 +0000 (15:02 -0400)]
tests: add atomic_add-bench
With this microbenchmark we can measure the overhead of emulating atomic
instructions with a configurable degree of contention.
The benchmark spawns $n threads, each performing $o atomic ops (additions)
in a loop. Each atomic operation is performed on a different cache line
(assuming lines are 64b long) that is randomly selected from a range [0, $r).
[ Note: each $foo corresponds to a -foo flag ]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <
1467054136-10430-20-git-send-email-cota@braap.org>
Emilio G. Cota [Mon, 27 Jun 2016 19:02:06 +0000 (15:02 -0400)]
target-i386: remove helper_lock()
It's been superseded by the atomic helpers.
The use of the atomic helpers provides a significant performance and scalability
improvement. Below is the result of running the atomic_add-test microbenchmark with:
$ x86_64-linux-user/qemu-x86_64 tests/atomic_add-bench -o 5000000 -r $r -n $n
, where $n is the number of threads and $r is the allowed range for the additions.
The scenarios measured are:
- atomic: implements x86' ADDL with the atomic_add helper (i.e. this patchset)
- cmpxchg: implement x86' ADDL with a TCG loop using the cmpxchg helper
- master: before this patchset
Results sorted in ascending range, i.e. descending degree of contention.
Y axis is Throughput in Mops/s. Tests are run on an AMD machine with 64
Opteron 6376 cores.
atomic_add-bench: 5000000 ops/thread, [0,1] range
25 ++---------+----------+---------+----------+----------+----------+---++
+ atomic +-E--+ + + + + + |
|cmpxchg +-H--+ |
20 +Emaster +-N--+ ++
|| |
|++ |
|| |
15 +++ ++
|N| |
|+| |
10 ++| ++
|+|+ |
| | -+E+------ +++ ---+E+------+E+------+E+-----+E+------+E|
|+E+E+- +++ +E+------+E+-- |
5 ++|+ ++
|+N+H+--- +++ |
++++N+--+H++----+++ + +++ --++H+------+H+------+H++----+H+---+--- |
0 ++---------+-----H----+---H-----+----------+----------+----------+---H+
0 10 20 30 40 50 60
Number of threads
atomic_add-bench: 5000000 ops/thread, [0,2] range
25 ++---------+----------+---------+----------+----------+----------+---++
++atomic +-E--+ + + + + + |
|cmpxchg +-H--+ |
20 ++master +-N--+ ++
|E| |
|++ |
||E |
15 ++| ++
|N|| |
|+|| ---+E+------+E+-----+E+------+E|
10 ++| | ---+E+------+E+-----+E+--- +++ +++
||H+E+--+E+-- |
|+++++ |
| || |
5 ++|+H+-- +++ ++
|+N+ - ---+H+------+H+------ |
+ +N+--+H++----+H+---+--+H+----++H+--- + + +H+---+--+H|
0 ++---------+----------+---------+----------+----------+----------+---++
0 10 20 30 40 50 60
Number of threads
atomic_add-bench: 5000000 ops/thread, [0,8] range
40 ++---------+----------+---------+----------+----------+----------+---++
++atomic +-E--+ + + + + + |
35 +cmpxchg +-H--+ ++
| master +-N--+ ---+E+------+E+------+E+-----+E+------+E|
30 ++| ---+E+-- +++ ++
| | -+E+--- |
25 ++E ---- +++ ++
|+++++ -+E+ |
20 +E+ E-- +++ ++
|H|+++ |
|+| +H+------- |
15 ++H+ ---+++ +H+------ ++
|N++H+-- +++--- +H+------++|
10 ++ +++ - +++ ---+H+ +++ +H+
| | +H+-----+H+------+H+-- |
5 ++| +++ ++
++N+N+--+N++ + + + + + |
0 ++---------+----------+---------+----------+----------+----------+---++
0 10 20 30 40 50 60
Number of threads
atomic_add-bench: 5000000 ops/thread, [0,128] range
160 ++---------+---------+----------+---------+----------+----------+---++
+ atomic +-E--+ + + + + + |
140 +cmpxchg +-H--+ +++ +++ ++
| master +-N--+ E--------E------+E+------++|
120 ++ --| | +++ E+
| -- +++ +++ ++|
100 ++ - ++
| +++- +++ ++|
80 ++ -+E+ -+H+------+H+------H--------++
| ---- ---- +++ H|
| ---+E+-----+E+- ---+H+ ++|
60 ++ +E+--- +++ ---+H+--- ++
| --+++ ---+H+-- |
40 ++ +E+-+H+--- ++
| +H+ |
20 +EE+ ++
+N+ + + + + + + |
0 ++N-N---N--+---------+----------+---------+----------+----------+---++
0 10 20 30 40 50 60
Number of threads
atomic_add-bench: 5000000 ops/thread, [0,1024] range
350 ++---------+---------+----------+---------+----------+----------+---++
+ atomic +-E--+ + + + + + |
300 +cmpxchg +-H--+ +++
| master +-N--+ +++ ||
| +++ | ----E|
250 ++ | ----E---- ++
| ----E--- | ---+H|
200 ++ -+E+--- +++ ---+H+--- ++
| ---- -+H+-- |
| +E+ +++ ---- +++ |
150 ++ ---+++ ---+H+- ++
| --- -+H+-- |
100 ++ ---+E+ ---- +++ ++
| +++ ---+E+-----+H+- |
| -+E+------+H+-- |
50 ++ +E+ ++
+EE+ + + + + + + |
0 ++N-N---N--+---------+----------+---------+----------+----------+---++
0 10 20 30 40 50 60
Number of threads
hi-res: http://imgur.com/a/fMRmq
For master I stopped measuring master after 8 threads, because there is little
point in measuring the well-known performance collapse of a contended lock.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <
1467054136-10430-21-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Emilio G. Cota [Mon, 27 Jun 2016 19:02:04 +0000 (15:02 -0400)]
target-i386: emulate XCHG using atomic helper
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <
1467054136-10430-19-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Emilio G. Cota [Mon, 27 Jun 2016 19:02:03 +0000 (15:02 -0400)]
target-i386: emulate LOCK'ed BTX ops using atomic helpers
[rth: Avoid redundant qemu_ld in locked case. Fix previously unnoticed
incorrect zero-extension of address in register-offset case.]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <
1467054136-10430-18-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Emilio G. Cota [Mon, 27 Jun 2016 19:02:02 +0000 (15:02 -0400)]
target-i386: emulate LOCK'ed XADD using atomic helper
[rth: Move load of reg value to common location.]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <
1467054136-10430-17-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Emilio G. Cota [Mon, 27 Jun 2016 19:02:01 +0000 (15:02 -0400)]
target-i386: emulate LOCK'ed NEG using cmpxchg helper
[rth: Move redundant qemu_load out of cmpxchg loop.]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <
1467054136-10430-16-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Emilio G. Cota [Mon, 27 Jun 2016 19:02:00 +0000 (15:02 -0400)]
target-i386: emulate LOCK'ed NOT using atomic helper
[rth: Avoid qemu_load that's redundant with the atomic op.]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <
1467054136-10430-15-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Emilio G. Cota [Mon, 27 Jun 2016 19:01:59 +0000 (15:01 -0400)]
target-i386: emulate LOCK'ed INC using atomic helper
[rth: Merge gen_inc_locked back into gen_inc to share cc update.]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <
1467054136-10430-14-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Emilio G. Cota [Mon, 27 Jun 2016 19:01:58 +0000 (15:01 -0400)]
target-i386: emulate LOCK'ed OP instructions using atomic helpers
[rth: Eliminate some unnecessary temporaries.]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <
1467054136-10430-13-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Emilio G. Cota [Mon, 27 Jun 2016 19:01:51 +0000 (15:01 -0400)]
target-i386: emulate LOCK'ed cmpxchg using cmpxchg helpers
The diff here is uglier than necessary. All this does is to turn
FOO
into:
if (s->prefix & PREFIX_LOCK) {
BAR
} else {
FOO
}
where FOO is the original implementation of an unlocked cmpxchg.
[rth: Adjust unlocked cmpxchg to use movcond instead of branches.
Adjust helpers to use atomic helpers.]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <
1467054136-10430-6-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 16 Sep 2016 16:24:20 +0000 (09:24 -0700)]
tcg: Emit barriers with parallel_cpus
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 2 Sep 2016 19:23:57 +0000 (12:23 -0700)]
tcg: Add CONFIG_ATOMIC64
Allow qemu to build on 32-bit hosts without 64-bit atomic ops.
Even if we only allow 32-bit hosts to multi-thread emulate 32-bit
guests, we still need some way to handle the 32-bit guest using a
64-bit atomic operation. Do so by dropping back to single-step.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 30 Jun 2016 04:10:59 +0000 (21:10 -0700)]
tcg: Add atomic128 helpers
Force the use of cmpxchg16b on x86_64.
Wikipedia suggests that only very old AMD64 (circa 2004) did not have
this instruction. Further, it's required by Windows 8 so no new cpus
will ever omit it.
If we truely care about these, then we could check this at startup time
and then avoid executing paths that use it.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Tue, 28 Jun 2016 18:37:27 +0000 (11:37 -0700)]
tcg: Add atomic helpers
Add all of cmpxchg, op_fetch, fetch_op, and xchg.
Handle both endian-ness, and sizes up to 8.
Handle expanding non-atomically, when emulating in serial.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Sat, 9 Jul 2016 02:02:33 +0000 (19:02 -0700)]
cputlb: Tidy some macros
TGT_LE and TGT_BE are not size dependent and do not need to be
redefined. The others are no longer used at all.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Sat, 9 Jul 2016 01:51:28 +0000 (18:51 -0700)]
cputlb: Move most of iotlb code out of line
Saves 2k code size off of a cold path.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Sat, 9 Jul 2016 01:24:55 +0000 (18:24 -0700)]
cputlb: Remove includes from softmmu_template.h
We already include exec/address-spaces.h and exec/memory.h in
cputlb.c; the include of qemu/timer.h appears to be a fossil.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Sat, 9 Jul 2016 01:22:26 +0000 (18:22 -0700)]
cputlb: Move probe_write out of softmmu_template.h
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Sat, 9 Jul 2016 01:14:28 +0000 (18:14 -0700)]
cputlb: Replace SHIFT with DATA_SIZE
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Alex Bennée [Wed, 5 Oct 2016 18:13:04 +0000 (11:13 -0700)]
linux-user: enable parallel code generation on clone
The variable parallel_cpus controls the generation of thread aware
atomic code. We only need to set it once we clone our first thread.
At this point any existing translations need to be thrown away.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 30 Jun 2016 05:12:55 +0000 (22:12 -0700)]
tcg: Add EXCP_ATOMIC
When we cannot emulate an atomic operation within a parallel
context, this exception allows us to stop the world and try
again in a serial context.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 29 Jun 2016 23:57:26 +0000 (16:57 -0700)]
int128: Add int128_make128
Allows Int128 to be used more generally, rather than having to
begin with 64-bit inputs and accumulate.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 29 Jun 2016 22:52:10 +0000 (15:52 -0700)]
int128: Use __int128 if available
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 29 Jun 2016 22:48:03 +0000 (15:48 -0700)]
exec: Avoid direct references to Int128 parts
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Mon, 24 Oct 2016 17:29:32 +0000 (10:29 -0700)]
atomics: Add __nocheck atomic operations
While the check against sizeof(void *) is appropriate for
normal usage within qemu, there are places in which we want
wider operaions and have checked for their existance.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Emilio G. Cota [Mon, 27 Jun 2016 19:01:54 +0000 (15:01 -0400)]
atomics: add atomic_op_fetch variants
This paves the way for upcoming work.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <
1467054136-10430-9-git-send-email-cota@braap.org>
Emilio G. Cota [Mon, 27 Jun 2016 19:01:53 +0000 (15:01 -0400)]
atomics: add atomic_xor
This paves the way for upcoming work.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <
1467054136-10430-8-git-send-email-cota@braap.org>
Richard Henderson [Mon, 24 Oct 2016 16:49:25 +0000 (09:49 -0700)]
atomics: Add parameters to macros
Making these functional rather than object macros will
prevent later problems with complex macro expansion.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Prasad J Pandit [Thu, 20 Oct 2016 07:40:24 +0000 (13:10 +0530)]
audio: intel-hda: check stream entry count during transfer
Intel HDA emulator uses stream of buffers during DMA data
transfers. Each entry has buffer length and buffer pointer
position, which are used to derive bytes to 'copy'. If this
length and buffer pointer were to be same, 'copy' could be
set to zero(0), leading to an infinite loop. Add check to
avoid it.
Reported-by: Huawei PSIRT <psirt@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1476949224-6865-1-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Zhang Chen [Mon, 17 Oct 2016 09:23:59 +0000 (17:23 +0800)]
colo-proxy: fix memory leak
Fix memory leak in colo-compare.c and filter-rewriter.c
Report by Coverity and add some comments.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Prasad J Pandit [Fri, 21 Oct 2016 12:09:29 +0000 (17:39 +0530)]
net: rtl8139: limit processing of ring descriptors
RTL8139 ethernet controller in C+ mode supports multiple
descriptor rings, each with maximum of 64 descriptors. While
processing transmit descriptor ring in 'rtl8139_cplus_transmit',
it does not limit the descriptor count and runs forever. Add
check to avoid it.
Reported-by: Andrew Henderson <hendersa@icculus.org>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Li Qiang [Wed, 10 Aug 2016 19:12:20 +0000 (00:42 +0530)]
net: vmxnet: initialise local tx descriptor
In Vmxnet3 device emulator while processing transmit(tx) queue,
when it reaches end of packet, it calls vmxnet3_complete_packet.
In that local 'txcq_descr' object is not initialised, which could
leak host memory bytes a guest.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Kevin Wolf [Sun, 16 Oct 2016 22:35:07 +0000 (00:35 +0200)]
e1000e: Don't zero out buffer address in rx descriptor
The e1000e emulation zeroes out any used rx descriptor and then writes a
completely newly constructed value there. By doing this, it doesn't only
update the write-back area of the descriptors (as it's supposed to do),
but it also clears the buffer address, which real hardware doesn't do.
The spec explicitly mentions in chapter 7.1.8 that it is valid for a
driver to reuse a descriptor and only update the status field while
doing so, i.e. reusing the old buffer address:
If software statically allocates buffers, and uses memory read to
check for completed descriptors, it simply has to zero the status
byte in the descriptor to make it ready for reuse by hardware.
This patch fixes the behaviour to leave the buffer address in
descriptors unchanged even after the descriptor has been used.
Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Prasad J Pandit [Wed, 12 Oct 2016 09:10:55 +0000 (14:40 +0530)]
net: rocker: set limit to DMA buffer size
Rocker network switch emulator has test registers to help debug
DMA operations. While testing host DMA access, a buffer address
is written to register 'TEST_DMA_ADDR' and its size is written to
register 'TEST_DMA_SIZE'. When performing TEST_DMA_CTRL_INVERT
test, if DMA buffer size was greater than 'INT_MAX', it leads to
an invalid buffer access. Limit the DMA buffer size to avoid it.
Reported-by: Huawei PSIRT <psirt@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Li Qiang [Sat, 8 Oct 2016 12:07:25 +0000 (05:07 -0700)]
net: eepro100: fix memory leak in device uninit
The exit dispatch of eepro100 network card device doesn't free
the 's->vmstate' field which was allocated in device realize thus
leading a host memory leak. This patch avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Brad Smith [Fri, 7 Oct 2016 01:28:33 +0000 (21:28 -0400)]
tap-bsd: OpenBSD uses tap(4) now
Update the tap-bsd code now that OpenBSD uses tap(4).
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Prasad J Pandit [Fri, 30 Sep 2016 06:49:12 +0000 (12:19 +0530)]
net: pcnet: fix source formatting and indentation
Fix indentations and source format at few places. Add braces
around 'if' and 'while' statements.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Prasad J Pandit [Thu, 29 Sep 2016 18:57:33 +0000 (00:27 +0530)]
net: pcnet: check rx/tx descriptor ring length
The AMD PC-Net II emulator has set of control and status(CSR)
registers. Of these, CSR76 and CSR78 hold receive and transmit
descriptor ring length respectively. This ring length could range
from 1 to 65535. Setting ring length to zero leads to an infinite
loop in pcnet_rdra_addr() or pcnet_transmit(). Add check to avoid it.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Richard Henderson [Fri, 14 Aug 2015 14:59:24 +0000 (07:59 -0700)]
target-m68k: Optimize gen_flush_flags
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Richard Henderson [Fri, 14 Aug 2015 14:59:23 +0000 (07:59 -0700)]
target-m68k: Optimize some comparisons
Signed-off-by: Richard Henderson <rth@twiddle.net>
[laurent: fixed VC and VS: assign v1, not v2]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Richard Henderson [Fri, 14 Aug 2015 14:59:22 +0000 (07:59 -0700)]
target-m68k: Use setcond for scc
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Richard Henderson [Fri, 14 Aug 2015 14:59:21 +0000 (07:59 -0700)]
target-m68k: Introduce DisasCompare
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Richard Henderson [Fri, 14 Aug 2015 14:59:20 +0000 (07:59 -0700)]
target-m68k: Reorg flags handling
Separate all ccr bits. Continue to batch updates via cc_op.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Fix gen_logic_cc() to really extend the size of the result.
Fix gen_get_ccr(): update cc_op as it is used by the helper.
Factorize flags computing and src/ccr cleanup
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
target-m68k: sr/ccr cleanup
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Richard Henderson [Fri, 14 Aug 2015 14:59:18 +0000 (07:59 -0700)]
target-m68k: Remove incorrect clearing of cc_x
The CF docs certainly doesnt suggest this is true.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Richard Henderson [Fri, 14 Aug 2015 14:59:17 +0000 (07:59 -0700)]
target-m68k: Some fixes to SR and flags management
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Richard Henderson [Fri, 14 Aug 2015 14:59:16 +0000 (07:59 -0700)]
target-m68k: Print flags properly
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Laurent Vivier [Sat, 8 Aug 2015 23:44:24 +0000 (01:44 +0200)]
target-m68k: update CPU flags management
Copied from target-i386
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Laurent Vivier [Sun, 17 Jan 2016 18:03:23 +0000 (19:03 +0100)]
target-m68k: don't update cc_dest in helpers
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Laurent Vivier [Sun, 17 Jan 2016 17:55:13 +0000 (18:55 +0100)]
target-m68k: update move to/from ccr/sr
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Laurent Vivier [Sat, 8 Aug 2015 23:44:24 +0000 (01:44 +0200)]
target-m68k: remove m68k_cpu_exec_enter() and m68k_cpu_exec_exit()
Update cc_op directly from tcg_gen_insn_start() and
restore_state_to_opc()
Copied from target-i386
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Richard Henderson [Fri, 14 Aug 2015 14:59:19 +0000 (07:59 -0700)]
target-m68k: Replace helper_xflag_lt with setcond
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Laurent Vivier [Sun, 9 Aug 2015 00:41:40 +0000 (02:41 +0200)]
target-m68k: allow to update flags with operation on words and bytes
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Laurent Vivier [Sat, 8 Aug 2015 23:23:35 +0000 (01:23 +0200)]
target-m68k: REG() macro cleanup
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Laurent Vivier [Sat, 16 Jan 2016 23:08:15 +0000 (00:08 +0100)]
target-m68k: set PAGE_BITS to 12 for m68k
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Laurent Vivier [Sat, 8 Aug 2015 23:12:46 +0000 (01:12 +0200)]
target-m68k: define operand sizes
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Laurent Vivier [Sat, 17 Sep 2011 19:21:07 +0000 (21:21 +0200)]
target-m68k: set disassembler mode to 680x0 or coldfire
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Laurent Vivier [Wed, 24 Jun 2015 00:28:59 +0000 (02:28 +0200)]
target-m68k: introduce read_imXX() functions
Read a 8, 16 or 32bit immediat constant.
An immediate constant is stored in the instruction opcode and
can be in one or two extension words.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Laurent Vivier [Wed, 24 Jun 2015 00:35:06 +0000 (02:35 +0200)]
target-m68k: manage scaled index
Scaled index is not supported by 68000, 68008, and 68010.
EA = (bd + PC) + Xn.SIZE*SCALE + od
Ignore it:
M68000 FAMILY PROGRAMMER’S REFERENCE MANUAL
2.4 BRIEF EXTENSION WORD FORMAT COMPATIBILITY
"If the MC68000 were to execute an instruction that
encoded a scaling factor, the scaling factor would be
ignored and would not access the desired memory address.
The earlier microprocessors do not recognize the brief
extension word formats implemented by newer processors.
Although they can detect illegal instructions, they do not
decode invalid encodings of the brief extension word formats
as exceptions."
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Laurent Vivier [Tue, 23 Jun 2015 18:55:08 +0000 (20:55 +0200)]
target-m68k: define m680x0 CPUs and features
This patch defines height new features:
- M68K_FEATURE_SCALED_INDEX, scaled address index register
- M68K_FEATURE_LONG_MULDIV, 32bit multiply/divide
- M68K_FEATURE_QUAD_MULDIV, 64bit multiply/divide
- M68K_FEATURE_BCCL, long conditional branches
- M68K_FEATURE_BITFIELD, bit field instructions
- M68K_FEATURE_FPU, FPU instructions
- M68K_FEATURE_CAS, cas instruction
- M68K_FEATURE_BKPT, bkpt instruction
Original patch from Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
John Paul Adrian Glaubitz [Wed, 3 Feb 2016 09:22:35 +0000 (10:22 +0100)]
target-m68k: Build the opcode table only once to avoid multithreading issues
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Laurent Vivier [Sun, 6 Dec 2015 18:01:47 +0000 (19:01 +0100)]
target-m68k: fix DEBUG_DISPATCH
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Peter Maydell [Tue, 25 Oct 2016 16:03:11 +0000 (17:03 +0100)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-10-25' into staging
QAPI patches for 2016-10-25
# gpg: Signature made Tue 25 Oct 2016 16:56:27 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2016-10-25:
qdict: implement a qdict_crumple method for un-flattening a dict
qapi: don't pass two copies of TestInputVisitorData to tests
qapi: rename QmpOutputVisitor to QObjectOutputVisitor
qapi: rename QmpInputVisitor to QObjectInputVisitor
qapi: rename *qmp-*-visitor* to *qobject-*-visitor*
qapi: add trace events for visitor
trivial: Restore blank line in qapi-schema
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Daniel P. Berrange [Fri, 30 Sep 2016 14:45:25 +0000 (15:45 +0100)]
qdict: implement a qdict_crumple method for un-flattening a dict
The qdict_flatten() method will take a dict whose elements are
further nested dicts/lists and flatten them by concatenating
keys.
The qdict_crumple() method aims to do the reverse, taking a flat
qdict, and turning it into a set of nested dicts/lists. It will
apply nesting based on the key name, with a '.' indicating a
new level in the hierarchy. If the keys in the nested structure
are all numeric, it will create a list, otherwise it will create
a dict.
If the keys are a mixture of numeric and non-numeric, or the
numeric keys are not in strictly ascending order, an error will
be reported.
As an example, a flat dict containing
{
'foo.0.bar': 'one',
'foo.0.wizz': '1',
'foo.1.bar': 'two',
'foo.1.wizz': '2'
}
will get turned into a dict with one element 'foo' whose
value is a list. The list elements will each in turn be
dicts.
{
'foo': [
{ 'bar': 'one', 'wizz': '1' },
{ 'bar': 'two', 'wizz': '2' }
],
}
If the key is intended to contain a literal '.', then it must
be escaped as '..'. ie a flat dict
{
'foo..bar': 'wizz',
'bar.foo..bar': 'eek',
'bar.hello': 'world'
}
Will end up as
{
'foo.bar': 'wizz',
'bar': {
'foo.bar': 'eek',
'hello': 'world'
}
}
The intent of this function is that it allows a set of QemuOpts
to be turned into a nested data structure that mirrors the nesting
used when the same object is defined over QMP.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <
1475246744-29302-3-git-send-email-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Parameter recursive dropped along with its tests; whitespace style
touched up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Daniel P. Berrange [Fri, 30 Sep 2016 14:45:29 +0000 (15:45 +0100)]
qapi: don't pass two copies of TestInputVisitorData to tests
The input_visitor_test_add() method was accepting an instance
of 'TestInputVisitorData' and passing it as the 'user_data'
parameter to test functions. The main 'TestInputVisitorData'
instance that was actually used, was meanwhile being allocated
automatically by the test framework fixture setup.
The 'user_data' parameter is going to be needed for tests
added in later patches, so getting rid of the current mistaken
usage now allows this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <
1475246744-29302-7-git-send-email-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Daniel P. Berrange [Fri, 30 Sep 2016 14:45:28 +0000 (15:45 +0100)]
qapi: rename QmpOutputVisitor to QObjectOutputVisitor
The QmpOutputVisitor has no direct dependency on QMP. It is
valid to use it anywhere that one wants a QObject. Rename it
to better reflect its functionality as a generic QAPI
to QObject converter.
The commit before previous renamed the files, this one renames C
identifiers.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <
1475246744-29302-6-git-send-email-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Split into file rename and identifier rename]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Daniel P. Berrange [Fri, 30 Sep 2016 14:45:27 +0000 (15:45 +0100)]
qapi: rename QmpInputVisitor to QObjectInputVisitor
The QmpInputVisitor has no direct dependency on QMP. It is
valid to use it anywhere that one has a QObject. Rename it
to better reflect its functionality as a generic QObject
to QAPI converter.
The previous commit renamed the files, this one renames C identifiers.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <
1475246744-29302-5-git-send-email-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Straightforwardly rebased, split into file and identifier rename]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Daniel P. Berrange [Fri, 30 Sep 2016 14:45:27 +0000 (15:45 +0100)]
qapi: rename *qmp-*-visitor* to *qobject-*-visitor*
The QMP visitors have no direct dependency on QMP. It is
valid to use them anywhere that one has a QObject. Rename them
to better reflect their functionality as a generic QObject
to QAPI converter.
This is the first of three parts: rename the files. The next two
parts will rename C identifiers. The split is necessary to make git
rename detection work.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Split into file and identifier rename, two comments touched up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Daniel P. Berrange [Fri, 30 Sep 2016 14:45:26 +0000 (15:45 +0100)]
qapi: add trace events for visitor
Allow tracing of the operation of visitors
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <
1475246744-29302-4-git-send-email-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[visit_type_uint8() & friends rearranged slightly for clarity]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Mon, 17 Oct 2016 21:29:54 +0000 (16:29 -0500)]
trivial: Restore blank line in qapi-schema
Commit de63ab6 accidentally undid part of commit a43edcf,
because the two patches were written in parallel, and the
blank line was not noticed as a casualty of merge conflicts.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
1476739794-19536-1-git-send-email-eblake@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Markus Armbruster [Tue, 25 Oct 2016 09:09:25 +0000 (11:09 +0200)]
tests: Restore check-qdict unit test
Commit ea3af47 accidentally dropped check-qdict from the list of unit
tests. Put it back.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id:
1477386565-26225-1-git-send-email-armbru@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 25 Oct 2016 09:25:27 +0000 (10:25 +0100)]
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
x86 and CPU queue, 2016-10-24
x2APIC support to APIC code, cpu_exec_init() refactor on all
architectures, and other x86 changes.
# gpg: Signature made Mon 24 Oct 2016 20:51:14 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
exec: call cpu_exec_exit() from a CPU unrealize common function
exec: move cpu_exec_init() calls to realize functions
exec: split cpu_exec_init()
pc: q35: Bump max_cpus to 288
pc: Require IRQ remapping and EIM if there could be x2APIC CPUs
pc: Add 'etc/boot-cpus' fw_cfg file for machine with more than 255 CPUs
Increase MAX_CPUMASK_BITS from 255 to 288
pc: Clarify FW_CFG_MAX_CPUS usage comment
pc: kvm_apic: Pass APIC ID depending on xAPIC/x2APIC mode
pc: apic_common: Reset APIC ID to initial ID when switching into x2APIC mode
pc: apic_common: Restore APIC ID to initial ID on reset
pc: apic_common: Extend APIC ID property to 32bit
pc: Leave max apic_id_limit only in legacy cpu hotplug code
acpi: cphp: Force switch to modern cpu hotplug if APIC ID > 254
pc: acpi: x2APIC support for SRAT table
pc: acpi: x2APIC support for MADT table and _MAT method
Conflicts:
target-arm/cpu.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Laurent Vivier [Thu, 20 Oct 2016 11:26:04 +0000 (13:26 +0200)]
exec: call cpu_exec_exit() from a CPU unrealize common function
As cpu_exec_exit() mirrors the cpu_exec_realizefn(),
rename it as cpu_exec_unrealizefn().
Create and register a cpu_common_unrealizefn() function for
the CPU device class and call cpu_exec_unrealizefn() from
this function.
Remove cpu_exec_exit() from cpu_common_finalize()
(which mirrors init, not realize), and as x86_cpu_unrealizefn()
and ppc_cpu_unrealizefn() overwrite the device class unrealize function,
add a call to a parent_unrealize pointer.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Laurent Vivier [Thu, 20 Oct 2016 11:26:03 +0000 (13:26 +0200)]
exec: move cpu_exec_init() calls to realize functions
Modify all CPUs to call it from XXX_cpu_realizefn() function.
Remove all the cannot_destroy_with_object_finalize_yet as
unsafe references have been moved to cpu_exec_realizefn().
(tested with QOM command provided by commit
4c315c27)
for arm:
Setting of cpu->mp_affinity is moved from arm_cpu_initfn()
to arm_cpu_realizefn() as setting of cpu_index is now done
in cpu_exec_realizefn(). To avoid to overwrite an user defined
value, we set it to an invalid value by default, and update
it in realize function only if the value is still invalid.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Laurent Vivier [Thu, 20 Oct 2016 11:26:02 +0000 (13:26 +0200)]
exec: split cpu_exec_init()
Put in cpu_exec_initfn() what initializes the CPU,
and leave in cpu_exec_init() what adds it to the environment.
As cpu_exec_initfn() is called by all XX_cpu_initfn(), call it
directly in cpu_common_initfn().
cpu_exec_init() is now a realize function, it will be renamed
to cpu_exec_realizefn() and moved to the XX_cpu_realizefn()
function in a following patch.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Wed, 19 Oct 2016 12:05:43 +0000 (14:05 +0200)]
pc: q35: Bump max_cpus to 288
Along with it for machine versions 2.7 and older keep
it at 255.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Wed, 19 Oct 2016 12:05:42 +0000 (14:05 +0200)]
pc: Require IRQ remapping and EIM if there could be x2APIC CPUs
It would prevent starting guest with incorrect configs
where interrupts couldn't be delivered to CPUs with
APIC IDs > 255.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Thu, 20 Oct 2016 14:58:42 +0000 (16:58 +0200)]
pc: Add 'etc/boot-cpus' fw_cfg file for machine with more than 255 CPUs
Currently firmware uses 1 byte at 0x5F offset in RTC CMOS
to get number of CPUs present at boot. However 1 byte is
not enough to handle more than 255 CPUs. So add a new
fw_cfg file that would allow QEMU to tell it.
For compat reasons add file only for machine types that
support more than 255 CPUs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Wed, 19 Oct 2016 12:05:40 +0000 (14:05 +0200)]
Increase MAX_CPUMASK_BITS from 255 to 288
so that it would be possible to increase maxcpus limit
for x86 target. Keep spapr/virt_arm at limit they used
to have 255.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Wed, 19 Oct 2016 12:05:39 +0000 (14:05 +0200)]
pc: Clarify FW_CFG_MAX_CPUS usage comment
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>