drm/i915: Fix pipe config mismatch for bpp, output format

Read back the pixel fomrat register and get the bpp.

v2: Read the PIPE_MISC register (Jani).

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1556809862-31203-3-git-send-email-vandita.kulkarni@intel.com

drm/i915: Refactor bdw_get_pipemisc_bpp

Move bdw_get_pipemisc_bpp alongside bdw_set_pipemisc

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1556809862-31203-2-git-send-email-vandita.kulkarni@intel.com

drm/i915: Fix the pipe state timing mismatch warnings

Adjust the get transcoder timings for mipi dsi as per the
set timing calculations.

v2: Use the existing intel_get_pipe_timings and do the dsi
    specific adjustments in the encoder get_config hook.(Ville, Jani)

v3: Exclude VBLANK and HBLANK registers for dsi transcoder.

v4: Fix the incomplete conditional logic.

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1556809862-31203-1-git-send-email-vandita.kulkarni@intel.com

drm/hdcp: drm_hdcp_request_srm() as static

Below Sparsh warnings are fixed.

Commit: drm: revocation check at drm subsystem
+drivers/gpu/drm/drm_hdcp.c:235:6: warning: symbol
'drm_hdcp_request_srm' was not declared. Should it be static?
+drivers/gpu/drm/drm_hdcp.c:27:3: warning: symbol 'srm_data' was not
declared. Should it be static?
+drivers/gpu/drm/drm_hdcp.c:317:5: warning: symbol 'drm_setup_hdcp_srm'
was not declared. Should it be static?
+drivers/gpu/drm/drm_hdcp.c:327:6: warning: symbol
'drm_teardown_hdcp_srm' was not declared. Should it be static?

cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190513133504.18612-1-ramalingam.c@intel.com

drm/i915: Check for no-op priority changes first

In all likelihood, the priority and node are already in the CPU cache
and by checking them first, we can avoid having to chase the
*request->hwsp for the current breadcrumb.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190513120102.29660-3-chris@chris-wilson.co.uk

drm/i915: Pass i915_sched_node around internally

To simplify the next patch, update bump_priority and schedule to accept
the internal i915_sched_ndoe directly and not expect a request pointer.

add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7)
Function                                     old     new   delta
i915_schedule_bump_priority                  109     113      +4
i915_schedule                                 50      54      +4
__i915_schedule                              922     907     -15

v2: Adopt node for the old rq local, since it no longer is a request but
the origin node.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190513120102.29660-2-chris@chris-wilson.co.uk

drm/i915: Rearrange i915_scheduler.c

To avoid pulling in a forward declaration in the next patch, move the
i915_sched_node handling to after the main dfs of the scheduler.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190513120102.29660-1-chris@chris-wilson.co.uk

drm/i915: Add readout and state check for pch_pfit.force_thru

Convert the HSW pch_pfit.force_thru to a proper state variable
with readout and accompanying pipe conf check. Makes the logic
a bit more straightforward, and hopefully prevents some
breakage in the future.

'force_thru' is probably not the best name for this, but I
didn't manage to come up with anything better either, so I
left it alone.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425162906.5242-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Fix fastset vs. pfit on/off on HSW EDP transcoder

On HSW the pipe A panel fitter lives inside the display power well,
and the input MUX for the EDP transcoder needs to be configured
appropriately to route the data through the power well as needed.
Changing the MUX setting is not allowed while the pipe is active,
so we need to force a full modeset whenever we need to change it.

Currently we may end up doing a fastset which won't change the
MUX settings, but it will drop the power well reference, and that
kills the pipe.

Cc: stable@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: d19f958db23c ("drm/i915: Enable fastset for non-boot modesets.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425162906.5242-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: disable framebuffer compression on GeminiLake

On many (all?) the Gemini Lake systems we work with, there is frequent
momentary graphical corruption at the top of the screen, and it seems
that disabling framebuffer compression can avoid this.

The ticket was reported 6 months ago and has already affected a
multitude of users, without any real progress being made. So, lets
disable framebuffer compression on GeminiLake until a solution is found.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108085
Fixes: fd7d6c5c8f3e ("drm/i915: enable FBC on gen9+ too")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190423092810.28359-1-jian-hong@endlessm.com

drm/hdcp: gathering hdcp related code into drm_hdcp.c

Considering the significant size of hdcp related code in drm, all
hdcp related codes are moved into separate file called drm_hdcp.c.

v2:
  Rebased.
v2:
  Rebased.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507162745.25600-7-ramalingam.c@intel.com

drm/i915: SRM revocation check for HDCP1.4 and 2.2

DRM HDCP SRM revocation check services are used from I915 for HDCP1.4
and 2.2 revocation check during the respective authentication flow.

v2:
  Rebased.
v3:
  %s/*_ksvs_revocated/*_check_ksvs_revoked [Daniel]
  unwanted noise is removed.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507162745.25600-6-ramalingam.c@intel.com

drm: revocation check at drm subsystem

On every hdcp revocation check request SRM is read from fw file
/lib/firmware/display_hdcp_srm.bin

SRM table is parsed and stored at drm_hdcp.c, with functions exported
for the services for revocation check from drivers (which
implements the HDCP authentication)

This patch handles the HDCP1.4 and 2.2 versions of SRM table.

v2:
  moved the uAPI to request_firmware_direct() [Daniel]
v3:
  kdoc added. [Daniel]
  srm_header unified and bit field definitions are removed. [Daniel]
  locking improved. [Daniel]
  vrl length violation is fixed. [Daniel]
v4:
  s/__swab16/be16_to_cpu [Daniel]
  be24_to_cpu is done through a global func [Daniel]
  Unused variables are removed. [Daniel]
  unchecked return values are dropped from static funcs [Daniel]

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Satyeshwar Singh <satyeshwar.singh@intel.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507162745.25600-5-ramalingam.c@intel.com

drm: generic fn converting be24 to cpu and vice versa

Existing functions for converting a 3bytes(be24) of big endian value
into u32 of little endian and vice versa are renamed as

s/drm_hdcp2_seq_num_to_u32/drm_hdcp_be24_to_cpu
s/drm_hdcp2_u32_to_seq_num/drm_hdcp_cpu_to_be24

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
cc: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507162745.25600-4-ramalingam.c@intel.com

drm/i915: debugfs: HDCP2.2 capability read

Adding the HDCP2.2 capability of HDCP src and sink info into debugfs
entry "i915_hdcp_sink_capability"

This helps the userspace tests to skip the HDCP2.2 test on non HDCP2.2
sinks.

v2:
  Rebased.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507162745.25600-3-ramalingam.c@intel.com

drm: move content protection property to mode_config

Content protection property is created once and stored in
drm_mode_config. And attached to all HDCP capable connectors.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507162745.25600-2-ramalingam.c@intel.com

drm/i915: Seal races between async GPU cancellation, retirement and signaling

Currently there is an underlying assumption that i915_request_unsubmit()
is synchronous wrt the GPU -- that is the request is no longer in flight
as we remove it. In the near future that may change, and this may upset
our signaling as we can process an interrupt for that request while it
is no longer in flight.

CPU0 CPU1
intel_engine_breadcrumbs_irq
(queue request completion)
i915_request_cancel_signaling
... ...
i915_request_enable_signaling
dma_fence_signal

Hence in the time it took us to drop the lock to signal the request, a
preemption event may have occurred and re-queued the request. In the
process, that request would have seen I915_FENCE_FLAG_SIGNAL clear and
so reused the rq->signal_link that was in use on CPU0, leading to bad
pointer chasing in intel_engine_breadcrumbs_irq.

A related issue was that if someone started listening for a signal on a
completed but no longer in-flight request, we missed the opportunity to
immediately signal that request.

Furthermore, as intel_contexts may be immediately released during
request retirement, in order to be entirely sure that
intel_engine_breadcrumbs_irq may no longer dereference the intel_context
(ce->signals and ce->signal_link), we must wait for irq spinlock.

In order to prevent the race, we use a bit in the fence.flags to signal
the transfer onto the signal list inside intel_engine_breadcrumbs_irq.
For simplicity, we use the DMA_FENCE_FLAG_SIGNALED_BIT as it then
quickly signals to any outside observer that the fence is indeed signaled.

v2: Sketch out potential dma-fence API for manual signaling
v3: And the test_and_set_bit()

Fixes: 52c0fdb25c7c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190508112452.18942-1-chris@chris-wilson.co.uk

drm/i915/hangcheck: Replace hangcheck.seqno with RING_HEAD

After realising we need to sample RING_START to detect context switches
from preemption events that do not allow for the seqno to advance, we
can also realise that the seqno itself is just a distance along the ring
and so can be replaced by sampling RING_HEAD.

v2: Bonus comment for the mystery separate CS_STALL before MI_USER_INTERRUPT

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190508080704.24223-1-chris@chris-wilson.co.uk

drm/i915: Reboot CI if forcewake fails

If the HW fails to ack a change in forcewake status, the machine is as
good as dead -- it may recover, but in reality it missed the mmio
updates and is now in a very inconsistent state. If it happens, we can't
trust the CI results (or at least the fails may be genuine but due to
the HW being dead and not the actual test!) so reboot the machine (CI
checks for a kernel taint in between each test and reboots if the
machine is tainted).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190508115245.27790-1-chris@chris-wilson.co.uk

drm/i915/icl: Fix setting 10 bit deep color mode

There is a bug in hdmi_deep_color_possible() - we compare pipe_bpp
<= 8*3 which returns true every time for hdmi_deep_color_possible 12 bit
deep color mode test in intel_hdmi_compute_config().(Even when the
requested color mode is 10 bit through max bpc property)

Comparing pipe_bpp with bpc * 3 takes care of this condition where
requested max bpc is 10 bit, so hdmi_deep_color_possible with 12 bit
returns false when requested max bpc is 10.(Ville)

v2:Add suggested by Ville Syrjälä

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507181856.16091-1-aditya.swarup@intel.com

drm/i915: Kill PCH_KBP

For us KBP is 100% identical to SPT. Kill the redundant enum
value. Also bspec doesn't talk about KBP either, so this might
avoid some confusion when cross checking the code against the
spec.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190506152627.20283-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/execlists: Don't apply priority boost for resets

Do not treat reset as a normal preemption event and avoid giving the
guilty request a priority boost for simply being active at the time of
reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507122954.6299-1-chris@chris-wilson.co.uk

drm/i915: Only reschedule the submission tasklet if preemption is possible

If we couple the scheduler more tightly with the execlists policy, we
can apply the preemption policy to the question of whether we need to
kick the tasklet at all for this priority bump.

v2: Rephrase it as a core i915 policy and not an execlists foible.
v3: Pull the kick together.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507122544.12698-1-chris@chris-wilson.co.uk

drm/i915: Stop spinning for DROP_IDLE (debugfs/i915_drop_caches)

If the user is racing a call to debugfs/i915_drop_caches with ongoing
submission from another thread/process, we may never end up idling the
GPU and be uninterruptibly spinning in debugfs/i915_drop_caches trying
to catch an idle moment.

Just flush the work once, that should be enough to park the system under
correct conditions. Outside of those we either have a driver bug or the
user is racing themselves. Sadly, because the user may be provoking the
unwanted situation we can't put a warn here to attract attention to a
probable bug.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507121108.18377-4-chris@chris-wilson.co.uk

drm/i915: Cancel retire_worker on parking

Replace the racy continuation check within retire_work with a definite
kill-switch on idling. The race was being exposed by gem_concurrent_blit
where the retire_worker would be terminated too early leaving us
spinning in debugfs/i915_drop_caches with nothing flushing the
retirement queue.

Although that the igt is trying to idle from one child while submitting
from another may be a contributing factor as to why  it runs so slowly...

v2: Use the non-sync version of cancel_delayed_work(), we only need to
stop it from being scheduled as we independently check whether now is
the right time to be parking.

Testcase: igt/gem_concurrent_blit
Fixes: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507121108.18377-3-chris@chris-wilson.co.uk

drm/i915: Remove delay for idle_work

The original intent for the delay before running the idle_work was to
provide a hysteresis to avoid ping-ponging the device runtime-pm. Since
then we have also pulled in some memory management and general device
management for parking. But with the inversion of the wakeref handling,
GEM is no longer responsible for the wakeref and by the time we call the
idle_work, the device is asleep. It seems appropriate now to drop the
delay and just run the worker immediately to flush the cached GEM state
before sleeping.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507121108.18377-2-chris@chris-wilson.co.uk

drm/i915: Flush the switch-to-kernel-context harder for DROP_IDLE

To complete the idle worker, we must complete 2 passes of wait-for-idle.
At the end of the first pass, we queue a switch-to-kernel-context and
may only idle after waiting for its completion. Speed up the flush_work
by doing the wait explicitly, which then allows us to remove the
unbounded loop trying to complete the flush_work in the next patch.

References: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Testcase: igt/gem_ppgtt/flind-and-close-vma-leak
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507121108.18377-1-chris@chris-wilson.co.uk

drm/i915/icl: Set GCP_COLOR_INDICATION only for 10/12 bit deep color

v2: Fix commit msg to reflect why issue occurs(Jani)
Set GCP_COLOR_INDICATION only when we set 10/12 bit deep color.

Changing settings from 10/12 bit deep color to 8 bit(& vice versa)
doesn't work correctly using xrandr max bpc property. When we
connect a monitor which supports deep color, the highest deep color
setting is selected; which sets GCP_COLOR_INDICATION. When we change
the setting to 8 bit color, we still set GCP_COLOR_INDICATION which
doesn't allow the switch back to 8 bit color.

v3,4: Add comments & drop changes in intel_hdmi_compute_config(Ville)
Since HSW+, GCP_COLOR_INDICATION is not required for 8bpc.

Drop the changes in intel_hdmi_compute_config as desired_bpp
is needed to change values for pipe_bpp based on bw_constrained flag.

v5: Fix missing logical && in condition for setting GCP_COLOR_INDICATION.

v6: Fix comment formatting (Ville)

v7: Add reviewed by Ville

v8: Set GCP_COLOR_INDICATION based on spec:
For Gen 7.5 or later platforms, indicate color depth only for deep
color modes. Bspec: 8135,7751,50524

Pre DDI platforms, indicate color depth if deep color is supported
by sink. Bspec: 7854

Exception: CHERRYVIEW behaves like Pre DDI platforms.
Bspec: 15975

Check pipe_bpp is less than bpp * 3 in hdmi_deep_color_possible,
to not set 12 bit deep color for every modeset. This fixes the issue
where 12 bit color was selected even when user selected 10 bit.(Ville)

v9: Maintain a consistent behavior for all platforms and support
GCP_COLOR_INDICATION only when we are in deep color mode. Remove
hdmi_sink_is_deep_color() - no longer needed as checking pipe_bpp > 24
takes care of the deep color mode scenario.

Separate patch for fixing switch from 12 bit to 10 bit deep color
mode.

Co-developed-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429230811.9983-1-aditya.swarup@intel.com

drm/i915: Assert the local engine->wakeref is active

Due to the asynchronous tasklet and recursive GT wakeref, it may happen
that we submit to the engine (underneath it's own wakeref) prior to the
central wakeref being marked as taken. Switch to checking the local wakeref
for greater consistency.

Fixes: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503115225.30831-3-chris@chris-wilson.co.uk

drm/i915: Prefer checking the wakeref itself rather than the counter

The counter goes to zero at the start of the parking cycle, but the
wakeref itself is held until the end. Likewise, the counter becomes one
at the end of the unparking, but the wakeref is taken first. If we check
the wakeref instead of the counter, we include the unpark/unparking time
as intel_wakeref_is_active(), and do not spuriously declare inactive if
we fail to park (i.e. the parking and wakeref drop is postponed).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503115225.30831-2-chris@chris-wilson.co.uk

drm/i915: Assert breadcrumbs are correctly ordered in the signal handler

Inside the signal handler, we expect the requests to be ordered by their
breadcrumb such that no later request may be complete if we find an
earlier incomplete. Add an assert to check that the next breadcrumb
should not be logically before the current.

v2: Move the overhanging line into its own function and reuse it after
doing the insertion.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503152214.26517-1-chris@chris-wilson.co.uk

drm/i915: Acquire the signaler's timeline HWSP last

Acquiring the signaler's timeline takes an active reference to their
HWSP that we would like to avoid if possible, so take it after
performing all of our allocations required to set up the fencing. The
acquisition also provides the final check that the target has not
already signaled allowing us to avoid the semaphore at the last moment.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503140239.32668-1-chris@chris-wilson.co.uk

drm/i915: Move the hsw/bdw pc8 code to intel_runtime_pm.c

hsw_enable_pc8()/hsw_disable_pc8() are more less equivalent to
the display core init/unit functions of later platforms. Relocate
the hsw/bdw code into intel_runtime_pm.c so that it sits next to
its cousins.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503193143.28240-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Replace intel_ddi_pll_init()

intel_ddi_pll_init() is an anachronism. Rename it to
hsw_assert_cdclk() and move it to the power domain init code.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503193143.28240-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Move w/a 0477/WaDisableIPC:skl into intel_init_ipc()

Move the w/a to disable IPC on SKL closer to the actual code
that implements IPS. Otherwise I just end up confused as to
what is excluding SKL from considerations.

IMO this makes more sense anyway since the hw does have the
feature, we're just not supposed to use it.

And this also makes us actually disable IPC in case eg. the
BIOS enabled it when it shouldn't have.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503173807.10834-3-ville.syrjala@linux.intel.com

drm/i915: Drop WaIncreaseLatencyIPCEnabled/1140 for cnl

Drop WaIncreaseLatencyIPCEnabled/Display w/a #1140 for
early cnl steppings.

v2: Drop the IS_GEN9_BC() change since other related
    parts of the code also use the KBL||CFL pattern

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503173807.10834-2-ville.syrjala@linux.intel.com

drm/i915: Document that we implement WaIncreaseLatencyIPCEnabled

Display w/a #1141 is also known as WaIncreaseLatencyIPCEnabled.
Add that to the comment.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503173807.10834-1-ville.syrjala@linux.intel.com

drm/i915: Disable semaphore busywaits on saturated systems

Asking the GPU to busywait on a memory address, perhaps not unexpectedly
in hindsight for a shared system, leads to bus contention that affects
CPU programs trying to concurrently access memory. This can manifest as
a drop in transcode throughput on highly over-saturated workloads.

The only clue offered by perf, is that the bus-cycles (perf stat -e
bus-cycles) jumped by 50% when enabling semaphores. This corresponds
with extra CPU active cycles being attributed to intel_idle's mwait.

This patch introduces a heuristic to try and detect when more than one
client is submitting to the GPU pushing it into an oversaturated state.
As we already keep track of when the semaphores are signaled, we can
inspect their state on submitting the busywait batch and if we planned
to use a semaphore but were too late, conclude that the GPU is
overloaded and not try to use semaphores in future requests. In
practice, this means we optimistically try to use semaphores for the
first frame of a transcode job split over multiple engines, and fail if
there are multiple clients active and continue not to use semaphores for
the subsequent frames in the sequence. Periodically, we try to
optimistically switch semaphores back on whenever the client waits to
catch up with the transcode results.

With 1 client, on Broxton J3455, with the relative fps normalized by %cpu:

x no semaphores
+ drm-tip
* patched
+------------------------------------------------------------------------+
|                                                    *                   |
|                                                    *+                  |
|                                                    **+                 |
|                                                    **+  x              |
|                                x               *  +**+  x              |
|                                x  x       *    *  +***x xx             |
|                                x  x       *    * *+***x *x             |
|                                x  x*   +  *    * *****x *x x           |
|                         +    x xx+x*   + ***   * ********* x   *       |
|                         +    x xx+x*   * *** +** ********* xx  *       |
|    *   +         ++++*  +    x*x****+*+* ***+*************+x*  *       |
|*+ +** *+ + +* + *++****** *xxx**********x***+*****************+*++    *|
|                                   |__________A_____M_____|             |
|                           |_______________A____M_________|             |
|                                 |____________A___M________|            |
+------------------------------------------------------------------------+
    N           Min           Max        Median           Avg        Stddev
x 120       2.60475       3.50941       3.31123     3.2143953    0.21117399
+ 120        2.3826       3.57077       3.25101     3.1414161    0.28146407
Difference at 95.0% confidence
-0.0729792 +/- 0.0629585
-2.27039% +/- 1.95864%
(Student's t, pooled s = 0.248814)
* 120       2.35536       3.66713        3.2849     3.2059917    0.24618565
No difference proven at 95.0% confidence

With 10 clients over-saturating the pipeline:

x no semaphores
+ drm-tip
* patched
+------------------------------------------------------------------------+
|                     ++                                        **       |
|                     ++                                        **       |
|                     ++                                        **       |
|                     ++                                        **       |
|                     ++                                    xx ***       |
|                     ++                                    xx ***       |
|                     ++                                    xxx***       |
|                     ++                                    xxx***       |
|                    +++                                    xxx***       |
|                    +++                                    xx****       |
|                    +++                                    xx****       |
|                    +++                                    xx****       |
|                    +++                                    xx****       |
|                    ++++                                   xx****       |
|                   +++++                                   xx****       |
|                   +++++                                 x x******      |
|                  ++++++                                 xxx*******     |
|                  ++++++                                 xxx*******     |
|                  ++++++                                 xxx*******     |
|                  ++++++                                 xx********     |
|                  ++++++                               xxxx********     |
|                  ++++++                               xxxx********     |
|                ++++++++                             xxxxx*********     |
|+ +  +        + ++++++++                           xxx*xx**********x*  *|
|                                                         |__A__|        |
|                 |__AM__|                                               |
|                                                            |__A_|      |
+------------------------------------------------------------------------+
    N           Min           Max        Median           Avg        Stddev
x 120       2.47855        2.8972       2.72376     2.7193402   0.074604933
+ 120       1.17367       1.77459       1.71977     1.6966782   0.085850697
Difference at 95.0% confidence
-1.02266 +/- 0.0203502
-37.607% +/- 0.748352%
(Student's t, pooled s = 0.0804246)
* 120       2.57868       3.00821       2.80142     2.7923878   0.058646477
Difference at 95.0% confidence
0.0730476 +/- 0.0169791
2.68622% +/- 0.624383%
(Student's t, pooled s = 0.0671018)

Indicating that we've recovered the regression from enabling semaphores
on this saturated setup, with a hint towards an overall improvement.

Very similar, but of smaller magnitude, results are observed on both
Skylake(gt2) and Kabylake(gt4). This may be due to the reduced impact of
bus-cycles, where we see a 50% hit on Broxton, it is only 10% on the big
core, in this particular test.

One observation to make here is that for a greedy client trying to
maximise its own throughput, using semaphores is the right choice. It is
only the holistic system-wide view that semaphores of one client
impacts another and reduces the overall throughput where we would choose
to disable semaphores.

The most noticeable negactive impact this has is on the no-op
microbenchmarks, which are also very notable for having no cpu bus load.
In particular, this increases the runtime and energy consumption of
gem_exec_whisper.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190504070707.30902-1-chris@chris-wilson.co.uk

drm/i915: Use mul_u32_u32() more

We have a lot of '(u64)foo * bar' everywhere. Replace with
mul_u32_u32() to avoid gcc failing to use a regular 32x32->64
multiply for this.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190408152702.4153-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Allow ICL pipe "HDR mode" when the cursor is visible

Turns out the cursor is compatible with the pipe "HDR mode". It's
only the actual SDR planes that get entirely bypassed during
blending. So let's ignore the cursor when checking if we have
any planes active that aren't HDR compatible. This fixes the
regressions in the kms_cursor_crc and kms_plane_cursor tests.

Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110579
Fixes: 09b25812db10 ("drm/i915: Enable pipe HDR mode on ICL if only HDR planes are used")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502200607.14504-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

drm/i915: Move the PIPEMISC write the correct place

I fumbled the PIPEMISC write into the wrong place. It only gets
called for fastsets, but since value needs to be updated based on
the set of active planes it needs to be done for all plane updates.
Move it to the correct spot.

The symptoms include SDR planes never showing up if a previous
modeset/fastset left the pipe in HDR mode. This was immediately
obvious when running the kms_plane pixel format tests. Unfortunately
the test didn't realize it was scanning out pure black all the time
and declared success anyway.

Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Fixes: 09b25812db10 ("drm/i915: Enable pipe HDR mode on ICL if only HDR planes are used")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502200607.14504-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

drm/i915: Delay semaphore submission until the start of the signaler

Currently we submit the semaphore busywait as soon as the signaler is
submitted to HW. However, we may submit the signaler as the tail of a
batch of requests, and even not as the first context in the HW list,
i.e. the busywait may start spinning far in advance of the signaler even
starting.

If we wait until the request before the signaler is completed before
submitting the busywait, we prevent the busywait from starting too
early, if the signaler is not first in submission port.

To handle the case where the signaler is at the start of the second (or
later) submission port, we will need to delay the execution callback
until we know the context is promoted to port0. A challenge for later.

Fixes: e88619646971 ("drm/i915: Use HW semaphores for inter-engine synchroni
sation on gen8+")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501114541.10077-9-chris@chris-wilson.co.uk

drm/i915/hangcheck: Track context changes

Given sufficient preemption, we may see a busy system that doesn't
advance seqno while performing work across multiple contexts, and given
sufficient pathology not even notice a change in ACTHD. What does change
between the preempting contexts is their RING, so take note of that and
treat a change in the ring address as being an indication of forward
progress.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501114541.10077-1-chris@chris-wilson.co.uk

drm/i915: Leave engine parking to the engines

Drop the check in GEM parking that the engines were already parked. The
intention here was that before we dropped the GT wakeref, we were sure
that no more interrupts could be raised -- however, we have already
dropped the wakeref by this point and the warning is no longer valid.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502150024.16636-2-chris@chris-wilson.co.uk

drm/i915/execlists: Flush the tasklet on parking

Tidy up the cleanup sequence by always ensure that the tasklet is
flushed on parking (before we cleanup). The parking provides a
convenient point to ensure that the backend is truly idle.

v2: Do the full check for idleness before parking, to be sure we flush
any residual interrupt.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503080942.30151-1-chris@chris-wilson.co.uk

drm/i915/guc: Fix runtime suspend

We are not allowed to rpm_get() inside the runtime-suspend callback, so
split the intel_uc_suspend() into the core that assumes the caller holds
the wakeref (intel_uc_runtime_suspend), and one that acquires the wakeref
as necessary (intel_uc_suspend).

Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Fixes: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502203009.15727-1-chris@chris-wilson.co.uk

drm/i915: extract intel_gmbus.h from i915_drv.h and rename intel_i2c.c

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

While at it, rename intel_i2c.c to intel_gmbus.c and the functions to
intel_gmbus_*.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5834b8fbbfd4ac2e3d0159e69c87f6926066f537.1556809195.git.jani.nikula@intel.com

drm/i915: move more generic utils to i915_utils.h

Reduce clutter from i915_drv.h and intel_drv.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8c197872384fc35442b738c21ba0da9336e02a85.1556809195.git.jani.nikula@intel.com

drm/i915: make i915_utils.h self-contained

And ensure it stays that way.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/69bcebefa6d8689d4a962394b0c6db04904354ed.1556809195.git.jani.nikula@intel.com

drm/i915: move i915_vgacntrl_reg() where needed

Reduce clutter from i915_drv.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d30a79d008b875f708f5acf7924f9ca8ab06b575.1556809195.git.jani.nikula@intel.com

drm/i915: extract i915_debugfs.h from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2843b028d65e118dc40316aa84bf620a93f6c67b.1556809195.git.jani.nikula@intel.com

drm/i915: extract intel_acpi.h from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9bc1317a67df0b9d019eca5b36f474b76a1cad26.1556809195.git.jani.nikula@intel.com

drm/i915: extract intel_lpe_audio.h from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9101a58b9f10bcf11332175e17b6e6e45f4ebd17.1556809195.git.jani.nikula@intel.com

drm/i915: extract intel_dpio_phy.h from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/876a1671a84c6839bcafdf276cf9c4e1da6c631c.1556809195.git.jani.nikula@intel.com

drm/i915/csr: move CSR version macros to intel_csr.h

Reduce clutter from i915_drv.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8222df3f559b056387b5c7e6e04a878cbf8b4e2e.1556809195.git.jani.nikula@intel.com

drm/i915: remove unused/stale macros and comments from intel_drv.h

Reduce clutter from intel_drv.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/963ba7fa0111135c3e796bfc9f86d6e33724758e.1556809195.git.jani.nikula@intel.com

drm/i915: move ranges to intel_display.c

Reduce clutter from intel_drv.h with the minimal change.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2c9248b50e620e95d85b8b9252d020a547c9474a.1556809195.git.jani.nikula@intel.com

drm/i915/dsi: move operation mode types to intel_dsi.h

Reduce clutter from intel_drv.h with the minimal change.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/72de677e844220d8522a836aae206c278ea45284.1556809195.git.jani.nikula@intel.com

drm/i915/dvo: move DVO chip types to intel_dvo.c

Reduce clutter from intel_drv.h with the minimal change.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/95203dbf844061da95f33614d0cb61533a11fdd4.1556809195.git.jani.nikula@intel.com

drm/i915: add single combo phy init/unit functions

Work on the principle that files should prefer not to expose platform
specific functions.

v2, v3: Rebase

Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502145234.7002-1-jani.nikula@intel.com

drm/i915: Tune down WARN about incorrect VBT TC legacy flag

Looks like VBT contains again the wrong information about a port's TypeC
legacy vs. DP-alt/TBT-alt type. There is no further issues after we
notice this and fix it up, so tune down the WARN to be a a DRM_ERROR.

This also avoids CI tainting the kernel and stopping the test run.

v2:
- Update also code coment accordingly. (Jani)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110578
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502101754.29219-1-imre.deak@intel.com

drm/i915: Include fence signaled bit in print_request()

Show the fence flags view of request completion in addition to the
normal hwsp check and whether signaling is enabled.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501114541.10077-2-chris@chris-wilson.co.uk

drm/i915/icl: Add missing combo PHY lane power setup

This step of the BSpec combo PHY port enabling is missing, so add it
now.

v2:
- Rebased on the new fixed v2 version of the helper.
v3:
- Use intel_ instead of icl_ prefix. (Jani)

Reported-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425185253.3197-2-imre.deak@intel.com

drm/i915/icl: Factor out combo PHY lane power setup helper

Factor out the combo PHY lane power configuration code to a separate
helper; it will be also needed by the next patch adding the same
configuration for DDI ports.

Add support for DDI ports and lane reversal as preparation for the next
patch.

The PWR_DOWN_LN_1 value is unspecified in the BSpec register description
so remove it.

v2:
- Fix up the wrong assumption that the encodings are the same for DDI
  and DSI ports. (Jani)
v3:
- Use intel_ instead of icl_ prefix. (Jani)
- Add required headers to intel_combo_phy.h after the upstream header
  refactoring.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> (v2)
Link: https://patchwork.freedesktop.org/patch/msgid/20190425185253.3197-1-imre.deak@intel.com

drm/i915: hsw+ audio regs are per-transocder

s/pipe/transcoder/ when dealing with hsw+ audio registers. This
won't actually make any real difference since there is no audio
on the EDP transcoder. But this should avoid a bit of confusion
when cross checking against the spec.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190430142901.7302-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Don't skip audio enable if ELD is bogus

We've already committed to enabling audio when intel_audio_codec_enable()
is called. We can't back out even if the ELD has turned sour in the
meantime. So just spew some debug log and plow ahead. Otherwise the
state checker gets unhappy when audio isn't enabled when it is
expected to be.

I suppose we really ought to precompute the ELD as well, but
let's just toss in a FIXME for the future.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103841
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190430142901.7302-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/csr: alpha_support doesn't depend on csr or vice versa

Debug logging should not be dependent on alpha support flag.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429142253.15882-1-jani.nikula@intel.com

drm/i915: Corrupt DSI picture fix for GeminiLake

Currently due to regression CI machine displays show corrupt picture.
Problem is when CDCLK is as low as 79200, picture gets unstable, while
DSI and DE pll values were confirmed to be correct.  Limiting to 158400
as agreed with Ville.

We could not come up with any better solution yet, as PLL divider values
both for MIPI(DSI PLL) and CDCLK(DE PLL) are correct, however seems that
due to some boundary conditions, when clocking is too low we get wrong
timings for DSI display.  Similar workaround exists for VLV though, so
just took similar condition into use. At least that way GLK platform
will start to be usable again, with current drm-tip.

v2: Fixed commit subject as suggested.

v3: Added generic bugs(crc failures, screen not init
for GLK DSI which might be affected).

v4: Added references tag for bugs affected.

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=109267
References: https://bugs.freedesktop.org/show_bug.cgi?id=103184
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190430125119.7478-1-stanislav.lisovskiy@intel.com

drm/i915: Complete both freed-object passes before draining the workqueue

The workqueue code complains viciously if we try to queue more work onto
the queue while attampting to drain it. As we asynchronously free
objects and defer their enqueuing with RCU, it is quite tricky to
quiesce the system before attempting to drain the workqueue. Yet drain
we must to ensure that the worker is idle before unloading the module.

Give the freed object drain 3 whole passes with multiple rcu_barrier()
to give the defer freeing of several levels each protected by RCU and
needing a grace period before its parent can be freed, ultimately
resulting in a GEM object being freed after another RCU period.

A consequence is that it will make module unload even slower.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110550
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501135753.8711-1-chris@chris-wilson.co.uk

drm/i915: Move the engine->destroy() vfunc onto the engine

Make the engine responsible for cleaning itself up!

This removes the i915->gt.cleanup vfunc that has been annoying the
casual reader and myself for the last several years, and helps keep a
future patch to add more cleanup tidy.

v2: Assert that engine->destroy is set after the backend starts
allocating its own state.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501103204.18632-1-chris@chris-wilson.co.uk

drm/i915: Enable pipe HDR mode on ICL if only HDR planes are used

The pipe has a special HDR mode with higher precision when only
HDR planes are active. Let's use it.

Curiously this fixes the kms_color gamma/degamma tests when
using a HDR plane, which is always the case unless one hacks
the test to use an SDR plane. If one does hack the test to use
an SDR plane it does pass already.

I have no actual explanation how the output after the gamma
LUT can be different between the two modes. The way the tests
are written should mean that the output should be identical
between the solid color vs. the gradient. But clearly that
somehow doesn't hold true for the HDR planes in non-HDR pipe
mode. Anyways, as long as we stick to one type of plane the
test should produce sensible results now.

v2: s/HDR_MODE/HDR_MODE_PRECISION/ (Shashank)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412183009.8237-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Tested-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>

drm/i915: Flatten and rename haswell_set_pipemisc()

Move the platform checks out from haswell_set_pipemisc() and
rename it to bdw_set_pipemisc() to make it clear when to call it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412183009.8237-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Wait for the struct_mutex on idling

When the system is idling, contention for struct_mutex should be low and
so we will be more efficient to wait for a contended mutex than
reschedule.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190430094405.6127-1-chris@chris-wilson.co.uk

drm/i915: extract intel_combo_phy.h from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6aea17072684dec0b04b6831c0c0e5a134edf87e.1556540890.git.jani.nikula@intel.com

drm/i915: move some leftovers to intel_pm.h from i915_drv.h

Commit 696173b064c6 ("drm/i915: extract intel_pm.h from intel_drv.h")
missed the declarations in i915_drv.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/770f5f1c2dd99e4d6a314b70184e71b928a6d362.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_runtime_pm.h from intel_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87904259868782c1ad664d852b27a50c1597cfaa.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_atomic.h from intel_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

v2: fix sparse warnings on undeclared global functions

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429125331.32499-1-jani.nikula@intel.com

drm/i915: extract intel_dsi_dcs_backlight.h from intel_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f35fc2ba76d7dd5886d304ad690a6f9078a56ecd.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_dp_mst.h from intel_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b2fd1b2b968aa0ce010d17e2811bc275cf9ca251.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_vdsc.h from intel_drv.h and i915_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/76d2719b462004ec6f6f5c302ee5d3876357c599.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_overlay.h from intel_drv.h and i915_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2e4fb1e67ed38870df3040bb0a1b1a58fd90cc86.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_quirks.h from intel_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e2fb90dcce2063b1c464dc64aa8fa6005b62bc6.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_bios.h functions from i915_drv.h

It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the header remains self-contained, and do so with minimal further
includes, using forward declarations as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf9b17d56489e15d82356575037432ad04712475.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_hotplug.h from intel_drv.h and i915_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

v2: fix sparse warnings on undeclared global functions

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429125011.10876-1-jani.nikula@intel.com

drm/i915: extract i915_irq.h from intel_drv.h and i915_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/64e46278dc8dccc9c548ef453cb2ceece5367bb2.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_dp_aux_backlight.h from intel_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2e5a386cbdcd361399e94c55d47a12352a5216c7.1556540890.git.jani.nikula@intel.com

drm/i915: extract intel_dp_link_training.h from intel_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eb23be64d04957b2cf82b79fd69cc57ed84043a4.1556540889.git.jani.nikula@intel.com

drm/i915: extract intel_fifo_underrun.h from intel_drv.h

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0507c5523d1f07a48e6679a04db75246ce8ba766.1556540889.git.jani.nikula@intel.com

drm/i915: move dsi init functions to intel_dsi.h

Keep the header self-contained. It'll need rework of its own in the
future, but gotta start somewhere.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/158347ef715a35ca1f7d945efb139d80bf5e0e6c.1556540889.git.jani.nikula@intel.com

drm/i915: make intel_dpll_mgr.h self-contained

And ensure it stays that way.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8e759b36dee10c20aa06e4d34d36cda6a2a02323.1556540889.git.jani.nikula@intel.com

drm/i915/dvo: rename dvo.h to intel_dvo_dev.h and make self-contained

Put the header more in line with the rest. No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9f4dc21928f9cccd7a3593a2f9faa44b4412ff33.1556540889.git.jani.nikula@intel.com

drm/i915: make intel_bios.h self-contained

Just a types include required.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/15b8dea022bd80198f91c59f8ad793ebd8fc04f0.1556540889.git.jani.nikula@intel.com

drm/i915: ensure more headers remain self-contained

Add more headers to the header test list:

* i915_drv.h
* i915_params.h
* i915_reg.h
* intel_drv.h
* intel_uncore.h

Happily they already are self-contained, but keep them that way.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f660e7e1258b81d50475fa73f610eb3312c83424.1556540889.git.jani.nikula@intel.com

drm/i915: do not mix workaround with normal flow

Separate the two comments: one is a workaround and the other is a sanity
check. We could just compare != 1, but let's treat them differently due
to having different meaning.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404230426.15837-4-lucas.demarchi@intel.com

drm/i915: reorder if chain to have last gen first

Reorder if/else so we check for gen >= 11 first, similar to most of
other checks in the driver.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404230426.15837-3-lucas.demarchi@intel.com

drm/i915/icl: fix step numbers in icl_display_core_init()

At some point the spec was changed and we never updated the numbers to
match it. Let's try once more to keep them in sync.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404230426.15837-2-lucas.demarchi@intel.com

drm/i915/icl: Whitelist GEN9_SLICE_COMMON_ECO_CHICKEN1

WaEnableStateCacheRedirectToCS context workaround configures the L3 cache
to benefit 3d workloads but media has different requirements.

Remove the workaround and whitelist the register to allow any userspace
configure the behaviour to their liking.

v2:
 * Remove the workaround apart from adding the whitelist.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: kevin.ma@intel.com
Cc: xiaogang.li@intel.com
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Anuj Phogat <anuj.phogat@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190418100634.984-1-tvrtko.ursulin@linux.intel.com
Fixes: f63c7b4880aa ("drm/i915/icl: WaEnableStateCacheRedirectToCS")
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[tursulin: Anuj reported no GPU hangs or performance regressions with old
 Mesa on patched kernel.]

drm/i915: Skip unused contexts for context_barrier_task()

If the context has not been used yet, it needs no barrier, and in the
process fix up the selftest in mock_contexts.

Testcase: igt/gem_ctx_clone/vm
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429090735.326-1-chris@chris-wilson.co.uk

drm/i915: Move i915_request_alloc into selftests/

Having transitioned GEM over to using intel_context as its primary means
of tracking the GEM context and engine combined and using
i915_request_create(), we can move the older i915_request_alloc()
helper function into selftests/ where the remaining users are confined.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426163336.15906-9-chris@chris-wilson.co.uk

drm/i915: Remove intel_context.active_link

We no longer need to track the active intel_contexts within each engine,
allowing us to drop a tricky mutex_lock from inside unpin (which may
occur inside fs_reclaim).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426163336.15906-8-chris@chris-wilson.co.uk