kdb: Fix handling of kallsyms_symbol_next() return value

commit c07d35338081d107e57cf37572d8cc931a8e32e2 upstream.

kallsyms_symbol_next() returns a boolean (true on success). Currently
kdb_read() tests the return value with an inequality that
unconditionally evaluates to true.

This is fixed in the obvious way and, since the conditional branch is
supposed to be unreachable, we also add a WARN_ON().

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: change driver unbind order of the sdio function devices

commit 5c3de777bdaf48bd0cfb43097c0d0fb85056cab7 upstream.

In the function brcmf_sdio_firmware_callback() the driver is
unbound from the sdio function devices in the error path.
However, the order in which it is done resulted in a use-after-free
issue (see brcmf_ops_sdio_remove() in bcmsdh.c). Hence change
the order and first unbind sdio function #2 device and then
unbind sdio function #1 device.

Fixes: 7a51461fc2da ("brcmfmac: unbind all devices upon failure in firmware callback")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s: Initialize ISAv3 MMU registers before setting partition table

commit 371b80447ff33ddac392c189cf884a5a3e18faeb upstream.

kexec can leave MMU registers set when booting into a new kernel,
the PIDR (Process Identification Register) in particular. The boot
sequence does not zero PIDR, so it only gets set when CPUs first
switch to a userspace processes (until then it's running a kernel
thread with effective PID = 0).

This leaves a window where a process table entry and page tables are
set up due to user processes running on other CPUs, that happen to
match with a stale PID. The CPU with that PID may cause speculative
accesses that address quadrant 0 (aka userspace addresses), which will
result in cached translations and PWC (Page Walk Cache) for that
process, on a CPU which is not in the mm_cpumask and so they will not
be invalidated properly.

The most common result is the kernel hanging in infinite page fault
loops soon after kexec (usually in schedule_tail, which is usually the
first non-speculative quadrant 0 access to a new PID) due to a stale
PWC. However being a stale translation error, it could result in
anything up to security and data corruption problems.

Fix this by zeroing out PIDR at boot and kexec.

Fixes: 7e381c0ff618 ("powerpc/mm/radix: Add mmu context handling callback for radix")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: Fix skey emulation permission check

commit ca76ec9ca871e67d8cd0b6caba24aca3d3ac4546 upstream.

All skey functions call skey_check_enable at their start, which checks
if we are in the PSTATE and injects a privileged operation exception
if we are.

Unfortunately they continue processing afterwards and perform the
operation anyhow as skey_check_enable does not deliver an error if the
exception injection was successful.

Let's move the PSTATE check into the skey functions and exit them on
such an occasion, also we now do not enable skey handling anymore in
such a case.

Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: a7e19ab ("KVM: s390: handle missing storage-key facility")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: fix compat system call table

commit e779498df587dd2189b30fe5b9245aefab870eb8 upstream.

When wiring up the socket system calls the compat entries were
incorrectly set. Not all of them point to the corresponding compat
wrapper functions, which clear the upper 33 bits of user space
pointers, like it is required.

Fixes: 977108f89c989 ("s390: wire up separate socketcalls system calls")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smp/hotplug: Move step CPUHP_AP_SMPCFD_DYING to the correct place

commit 46febd37f9c758b05cd25feae8512f22584742fe upstream.

Commit 31487f8328f2 ("smp/cfd: Convert core to hotplug state machine")
accidently put this step on the wrong place. The step should be at the
cpuhp_ap_states[] rather than the cpuhp_bp_states[].

grep smpcfd /sys/devices/system/cpu/hotplug/states
 40: smpcfd:prepare
129: smpcfd:dying

"smpcfd:dying" was missing before.
So was the invocation of the function smpcfd_dying_cpu().

Fixes: 31487f8328f2 ("smp/cfd: Convert core to hotplug state machine")
Signed-off-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lkml.kernel.org/r/20171128131954.81229-1-jiangshanlai@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Fix scatterlist offset handling

commit 29a90b70893817e2f2bb3cea40a29f5308e21b21 upstream.

The intel-iommu DMA ops fail to correctly handle scatterlists where
sg->offset is greater than PAGE_SIZE - the IOVA allocation is computed
appropriately based on the page-aligned portion of the offset, but the
mapping is set up relative to sg->page, which means it fails to actually
cover the whole buffer (and in the worst case doesn't cover it at all):

    (sg->dma_address + sg->dma_len) ----+
    sg->dma_address ---------+          |
    iov_pfn------+           |          |
                 |           |          |
                 v           v          v
iova:   a        b        c        d        e        f
        |--------|--------|--------|--------|--------|
                          <...calculated....>
                 [_____mapped______]
pfn:    0        1        2        3        4        5
        |--------|--------|--------|--------|--------|
                 ^           ^          ^
                 |           |          |
    sg->page ----+           |          |
    sg->offset --------------+          |
    (sg->offset + sg->length) ----------+

As a result, the caller ends up overrunning the mapping into whatever
lies beyond, which usually goes badly:

[  429.645492] DMAR: DRHD: handling fault status reg 2
[  429.650847] DMAR: [DMA Write] Request device [02:00.4] fault addr f2682000 ...

Whilst this is a fairly rare occurrence, it can happen from the result
of intermediate scatterlist processing such as scatterwalk_ffwd() in the
crypto layer. Whilst that particular site could be fixed up, it still
seems worthwhile to bring intel-iommu in line with other DMA API
implementations in handling this robustly.

To that end, fix the intel_map_sg() path to line up the mapping
correctly (in units of MM pages rather than VT-d pages to match the
aligned_nrpages() calculation) regardless of the offset, and use
sg_phys() consistently for clarity.

Reported-by: Harsh Jain <Harsh@chelsio.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed by: Ashok Raj <ashok.raj@intel.com>
Tested by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add check return value for usb_string()

commit 89b89d121ffcf8d9546633b98ded9d18b8f75891 upstream.

snd_usb_copy_string_desc() returns zero if usb_string() fails.
In case of failure, we need to check the snd_usb_copy_string_desc()'s
return value and add an exception case

Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix out-of-bound error

commit 251552a2b0d454badc8f486e6d79100970c744b0 upstream.

The snd_usb_copy_string_desc() retrieves the usb string corresponding to
the index number through the usb_string(). The problem is that the
usb_string() returns the length of the string (>= 0) when successful, but
it can also return a negative value about the error case or status of
usb_control_msg().

If iClockSource is '0' as shown below, usb_string() will returns -EINVAL.
This will result in '0' being inserted into buf[-22], and the following
KASAN out-of-bound error message will be output.

AudioControl Interface Descriptor:
  bLength                 8
  bDescriptorType        36
  bDescriptorSubtype     10 (CLOCK_SOURCE)
  bClockID                1
  bmAttributes         0x07 Internal programmable Clock (synced to SOF)
  bmControls           0x07
  Clock Frequency Control (read/write)
  Clock Validity Control (read-only)
  bAssocTerminal          0
  iClockSource            0

To fix it, check usb_string()'return value and bail out.

==================================================================
BUG: KASAN: stack-out-of-bounds in parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
Write of size 1 at addr ffff88007e66735a by task systemd-udevd/18376

CPU: 0 PID: 18376 Comm: systemd-udevd Not tainted 4.13.0+ #3
Hardware name: LG Electronics                   15N540-RFLGL/White Tip Mountain, BIOS 15N5
Call Trace:
dump_stack+0x63/0x8d
print_address_description+0x70/0x290
? parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
kasan_report+0x265/0x350
__asan_store1+0x4a/0x50
parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
? save_stack+0xb5/0xd0
? save_stack_trace+0x1b/0x20
? save_stack+0x46/0xd0
? kasan_kmalloc+0xad/0xe0
? kmem_cache_alloc_trace+0xff/0x230
? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio]
? usb_audio_probe+0x4de/0xf40 [snd_usb_audio]
? usb_probe_interface+0x1f5/0x440
? driver_probe_device+0x3ed/0x660
? build_feature_ctl+0xb10/0xb10 [snd_usb_audio]
? save_stack_trace+0x1b/0x20
? init_object+0x69/0xa0
? snd_usb_find_csint_desc+0xa8/0xf0 [snd_usb_audio]
snd_usb_mixer_controls+0x1dc/0x370 [snd_usb_audio]
? build_audio_procunit+0x890/0x890 [snd_usb_audio]
? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio]
? kmem_cache_alloc_trace+0xff/0x230
? usb_ifnum_to_if+0xbd/0xf0
snd_usb_create_mixer+0x25b/0x4b0 [snd_usb_audio]
? snd_usb_create_stream+0x255/0x2c0 [snd_usb_audio]
usb_audio_probe+0x4de/0xf40 [snd_usb_audio]
? snd_usb_autosuspend.part.7+0x30/0x30 [snd_usb_audio]
? __pm_runtime_idle+0x90/0x90
? kernfs_activate+0xa6/0xc0
? usb_match_one_id_intf+0xdc/0x130
? __pm_runtime_set_status+0x2d4/0x450
usb_probe_interface+0x1f5/0x440

Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Remove spurious WARN_ON() at timer check

commit 43a3542870328601be02fcc9d27b09db467336ef upstream.

The use of snd_BUG_ON() in ALSA sequencer timer may lead to a spurious
WARN_ON() when a slave timer is deployed as its backend and a
corresponding master timer stops meanwhile.  The symptom was triggered
by syzkaller spontaneously.

Since the NULL timer is valid there, rip off snd_BUG_ON().

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: prevent UAF in snd_pcm_info

commit 362bca57f5d78220f8b5907b875961af9436e229 upstream.

When the device descriptor is closed, the `substream->runtime` pointer
is freed. But another thread may be in the ioctl handler, case
SNDRV_CTL_IOCTL_PCM_INFO. This case calls snd_pcm_info_user() which
calls snd_pcm_info() which accesses the now freed `substream->runtime`.

Note: this fixes CVE-2017-0861

Signed-off-by: Robb Glasser <rglasser@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix missing error return in btrfs_drop_snapshot

commit e19182c0fff451e3744c1107d98f072e7ca377a0 upstream.

If btrfs_del_root fails in btrfs_drop_snapshot, we'll pick up the
error but then return 0 anyway due to mixing err and ret.

Fixes: 79787eaab4612 ("btrfs: replace many BUG_ONs with proper error handling")
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix APIC page invalidation

commit b1394e745b9453dcb5b0671c205b770e87dedb87 upstream.

Implementation of the unpinned APIC page didn't update the VMCS address
cache when invalidation was done through range mmu notifiers.
This became a problem when the page notifier was removed.

Re-introduce the arch-specific helper and call it from ...range_start.

Reported-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Fixes: 38b9917350cb ("kvm: vmx: Implement set_apic_access_page_addr")
Fixes: 369ea8242c0f ("mm/rmap: update to new mmu_notifier semantic v2")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: Wanpeng Li <wanpeng.li@hotmail.com>
Tested-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/PCI: Make broadcom_postcore_init() check acpi_disabled

commit ddec3bdee05b06f1dda20ded003c3e10e4184cab upstream.

acpi_os_get_root_pointer() may return a valid address even if acpi_disabled
is set, but the host bridge information from the ACPI tables is not going
to be used in that case and the Broadcom host bridge initialization should
not be skipped then, So make broadcom_postcore_init() check acpi_disabled
too to avoid this issue.

Fixes: 6361d72b04d1 (x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan)
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linux PCI <linux-pci@vger.kernel.org>
Link: https://lkml.kernel.org/r/3186627.pxZj1QbYNg@aspire.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

X.509: fix comparisons of ->pkey_algo

commit 54c1fb39fe0495f846539ab765925b008f86801c upstream.

->pkey_algo used to be an enum, but was changed to a string by commit
4e8ae72a75aa ("X.509: Make algo identifiers text instead of enum").  But
two comparisons were not updated.  Fix them to use strcmp().

This bug broke signature verification in certain configurations,
depending on whether the string constants were deduplicated or not.

Fixes: 4e8ae72a75aa ("X.509: Make algo identifiers text instead of enum")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

X.509: reject invalid BIT STRING for subjectPublicKey

commit 0f30cbea005bd3077bd98cd29277d7fc2699c1da upstream.

Adding a specially crafted X.509 certificate whose subjectPublicKey
ASN.1 value is zero-length caused x509_extract_key_data() to set the
public key size to SIZE_MAX, as it subtracted the nonexistent BIT STRING
metadata byte.  Then, x509_cert_parse() called kmemdup() with that bogus
size, triggering the WARN_ON_ONCE() in kmalloc_slab().

This appears to be harmless, but it still must be fixed since WARNs are
never supposed to be user-triggerable.

Fix it by updating x509_cert_parse() to validate that the value has a
BIT STRING metadata byte, and that the byte is 0 which indicates that
the number of bits in the bitstring is a multiple of 8.

It would be nice to handle the metadata byte in asn1_ber_decoder()
instead.  But that would be tricky because in the general case a BIT
STRING could be implicitly tagged, and/or could legitimately have a
length that is not a whole number of bytes.

Here was the WARN (cleaned up slightly):

    WARNING: CPU: 1 PID: 202 at mm/slab_common.c:971 kmalloc_slab+0x5d/0x70 mm/slab_common.c:971
    Modules linked in:
    CPU: 1 PID: 202 Comm: keyctl Tainted: G    B            4.14.0-09238-g1d3b78bbc6e9 #26
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
    task: ffff880033014180 task.stack: ffff8800305c8000
    Call Trace:
     __do_kmalloc mm/slab.c:3706 [inline]
     __kmalloc_track_caller+0x22/0x2e0 mm/slab.c:3726
     kmemdup+0x17/0x40 mm/util.c:118
     kmemdup include/linux/string.h:414 [inline]
     x509_cert_parse+0x2cb/0x620 crypto/asymmetric_keys/x509_cert_parser.c:106
     x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
     asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
     key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
     SYSC_add_key security/keys/keyctl.c:122 [inline]
     SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0x96

Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: add missing permission check for request_key() destination

commit 4dca6ea1d9432052afb06baf2e3ae78188a4410b upstream.

When the request_key() syscall is not passed a destination keyring, it
links the requested key (if constructed) into the "default" request-key
keyring.  This should require Write permission to the keyring.  However,
there is actually no permission check.

This can be abused to add keys to any keyring to which only Search
permission is granted.  This is because Search permission allows joining
the keyring.  keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_SESSION_KEYRING)
then will set the default request-key keyring to the session keyring.
Then, request_key() can be used to add keys to the keyring.

Both negatively and positively instantiated keys can be added using this
method.  Adding negative keys is trivial.  Adding a positive key is a
bit trickier.  It requires that either /sbin/request-key positively
instantiates the key, or that another thread adds the key to the process
keyring at just the right time, such that request_key() misses it
initially but then finds it in construct_alloc_key().

Fix this bug by checking for Write permission to the keyring in
construct_get_dest_keyring() when the default keyring is being used.

We don't do the permission check for non-default keyrings because that
was already done by the earlier call to lookup_user_key().  Also,
request_key_and_link() is currently passed a 'struct key *' rather than
a key_ref_t, so the "possessed" bit is unavailable.

We also don't do the permission check for the "requestor keyring", to
continue to support the use case described by commit 8bbf4976b59f
("KEYS: Alter use of key instantiation link-to-keyring argument") where
/sbin/request-key recursively calls request_key() to add keys to the
original requestor's destination keyring.  (I don't know of any users
who actually do that, though...)

Fixes: 3e30148c3d52 ("[PATCH] Keys: Make request-key create an authorisation key")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASN.1: check for error from ASN1_OP_END__ACT actions

commit 81a7be2cd69b412ab6aeacfe5ebf1bb6e5bce955 upstream.

asn1_ber_decoder() was ignoring errors from actions associated with the
opcodes ASN1_OP_END_SEQ_ACT, ASN1_OP_END_SET_ACT,
ASN1_OP_END_SEQ_OF_ACT, and ASN1_OP_END_SET_OF_ACT.  In practice, this
meant the pkcs7_note_signed_info() action (since that was the only user
of those opcodes).  Fix it by checking for the error, just like the
decoder does for actions associated with the other opcodes.

This bug allowed users to leak slab memory by repeatedly trying to add a
specially crafted "pkcs7_test" key (requires CONFIG_PKCS7_TEST_KEY).

In theory, this bug could also be used to bypass module signature
verification, by providing a PKCS#7 message that is misparsed such that
a signature's ->authattrs do not contain its ->msgdigest.  But it
doesn't seem practical in normal cases, due to restrictions on the
format of the ->authattrs.

Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASN.1: fix out-of-bounds read when parsing indefinite length item

commit e0058f3a874ebb48b25be7ff79bc3b4e59929f90 upstream.

In asn1_ber_decoder(), indefinitely-sized ASN.1 items were being passed
to the action functions before their lengths had been computed, using
the bogus length of 0x80 (ASN1_INDEFINITE_LENGTH).  This resulted in
reading data past the end of the input buffer, when given a specially
crafted message.

Fix it by rearranging the code so that the indefinite length is resolved
before the action is called.

This bug was originally found by fuzzing the X.509 parser in userspace
using libFuzzer from the LLVM project.

KASAN report (cleaned up slightly):

    BUG: KASAN: slab-out-of-bounds in memcpy ./include/linux/string.h:341 [inline]
    BUG: KASAN: slab-out-of-bounds in x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366
    Read of size 128 at addr ffff880035dd9eaf by task keyctl/195

    CPU: 1 PID: 195 Comm: keyctl Not tainted 4.14.0-09238-g1d3b78bbc6e9 #26
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
    Call Trace:
     __dump_stack lib/dump_stack.c:17 [inline]
     dump_stack+0xd1/0x175 lib/dump_stack.c:53
     print_address_description+0x78/0x260 mm/kasan/report.c:252
     kasan_report_error mm/kasan/report.c:351 [inline]
     kasan_report+0x23f/0x350 mm/kasan/report.c:409
     memcpy+0x1f/0x50 mm/kasan/kasan.c:302
     memcpy ./include/linux/string.h:341 [inline]
     x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366
     asn1_ber_decoder+0xb4a/0x1fd0 lib/asn1_decoder.c:447
     x509_cert_parse+0x1c7/0x620 crypto/asymmetric_keys/x509_cert_parser.c:89
     x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
     asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
     key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
     SYSC_add_key security/keys/keyctl.c:122 [inline]
     SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0x96

    Allocated by task 195:
     __do_kmalloc_node mm/slab.c:3675 [inline]
     __kmalloc_node+0x47/0x60 mm/slab.c:3682
     kvmalloc ./include/linux/mm.h:540 [inline]
     SYSC_add_key security/keys/keyctl.c:104 [inline]
     SyS_add_key+0x19e/0x290 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0x96

Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi/esrt: Use memunmap() instead of kfree() to free the remapping

commit 89c5a2d34bda58319e3075e8e7dd727ea25a435c upstream.

The remapping result of memremap() should be freed with memunmap(), not kfree().

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20171206095010.24170-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: Move some sysfs files to be read-only by root

commit af97a77bc01ce49a466f9d4c0125479e2e2230b6 upstream.

Thanks to the scripts/leaking_addresses.pl script, it was found that
some EFI values should not be readable by non-root users.

So make them root-only, and to do that, add a __ATTR_RO_MODE() macro to
make this easier, and use it in other places at the same time.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20171206095010.24170-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libsas: align sata_device's rps_resp on a cacheline

commit c2e8fbf908afd81ad502b567a6639598f92c9b9d upstream.

The rps_resp buffer in ata_device is a DMA target, but it isn't
explicitly cacheline aligned. Due to this, adjacent fields can be
overwritten with stale data from memory on non-coherent architectures.
As a result, the kernel is sometimes unable to communicate with an SATA
device behind a SAS expander.

Fix this by ensuring that the rps_resp buffer is cacheline aligned.

This issue is similar to that fixed by Commit 84bda12af31f93 ("libata:
align ap->sector_buf") and Commit 4ee34ea3a12396f35b26 ("libata: Align
ata_device's id on a cacheline").

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: use dma_get_cache_alignment() as minimum DMA alignment

commit 90addc6b3c9cda0146fbd62a08e234c2b224a80c upstream.

In non-coherent DMA mode, kernel uses cache flushing operations to
maintain I/O coherency, so scsi's block queue should be aligned to the
value returned by dma_get_cache_alignment().  Otherwise, If a DMA buffer
and a kernel structure share a same cache line, and if the kernel
structure has dirty data, cache_invalidate (no writeback) will cause
data corruption.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
[hch: rebased and updated the comment and changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: dma-mapping: always provide dma_get_cache_alignment

commit 860dd4424f344400b491b212ee4acb3a358ba9d9 upstream.

Provide the dummy version of dma_get_cache_alignment that always returns
1 even if CONFIG_HAS_DMA is not set, so that drivers and subsystems can
use it without ifdefs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

isa: Prevent NULL dereference in isa_bus driver callbacks

commit 5a244727f428a06634f22bb890e78024ab0c89f3 upstream.

The isa_driver structure for an isa_bus device is stored in the device
platform_data member of the respective device structure. This
platform_data member may be reset to NULL if isa_driver match callback
for the device fails, indicating a device unsupported by the ISA driver.

This patch fixes a possible NULL pointer dereference if one of the
isa_driver callbacks to attempted for an unsupported device. This error
should not occur in practice since ISA devices are typically manually
configured and loaded by the users, but we may as well prevent this
error from popping up for the 0day testers.

Fixes: a5117ba7da37 ("[PATCH] Driver model: add ISA bus")
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv: kvp: Avoid reading past allocated blocks from KVP file

commit 297d6b6e56c2977fc504c61bbeeaa21296923f89 upstream.

While reading in more than one block (50) of KVP records, the allocation
goes per block, but the reads used the total number of allocated records
(without resetting the pointer/stream). This causes the records buffer to
overrun when the refresh reads more than one block over the previous
capacity (e.g. reading more than 100 KVP records whereas the in-memory
database was empty before).

Fix this by reading the correct number of KVP records from file each time.

Signed-off-by: Paul Meyer <Paul.Meyer@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio: release virtio index when fail to device_register

commit e60ea67bb60459b95a50a156296041a13e0e380e upstream.

index can be reused by other virtio device.

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: usb_8dev: cancel urb on -EPIPE and -EPROTO

commit 12147edc434c9e4c7c2f5fee2e5519b2e5ac34ce upstream.

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: esd_usb2: cancel urb on -EPIPE and -EPROTO

commit 7a31ced3de06e9878e4f9c3abe8f87d9344d8144 upstream.

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: ems_usb: cancel urb on -EPIPE and -EPROTO

commit bd352e1adfe0d02d3ea7c8e3fb19183dc317e679 upstream.

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: cancel urb on -EPIPE and -EPROTO

commit 6aa8d5945502baf4687d80de59b7ac865e9e666b upstream.

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: ratelimit errors if incomplete messages are received

commit 8bd13bd522ff7dfa0eb371921aeb417155f7a3be upstream.

Avoid flooding the kernel log with "Formate error", if incomplete message
are received.

Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: Fix comparison bug in kvaser_usb_read_bulk_callback()

commit e84f44eb5523401faeb9cc1c97895b68e3cfb78d upstream.

The conditon in the while-loop becomes true when actual_length is less than
2 (MSG_HEADER_LEN). In best case we end up with a former, already
dispatched msg, that got msg->len greater than actual_length. This will
result in a "Format error" error printout.

Problem seen when unplugging a Kvaser USB device connected to a vbox guest.

warning: comparison between signed and unsigned integer expressions
[-Wsign-compare]

Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: free buf in error paths

commit 435019b48033138581a6171093b181fc6b4d3d30 upstream.

The allocated buffer was not freed if usb_submit_urb() failed.

Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: ti_hecc: Fix napi poll return value for repoll

commit f6c23b174c3c96616514827407769cbcfc8005cf upstream.

After commit d75b1ade567f ("net: less interrupt masking in NAPI") napi
repoll is done only when work_done == budget.
So we need to return budget if there are still packets to receive.

Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: renesas_usb3: fix number of the pipes

commit a58204ab91ad8cae4d8474aa0ba5d1fc504860c9 upstream.

This controller on R-Car Gen3 has 6 pipes that included PIPE 0 for
control actually. But, the datasheet has error in writing as it has
31 pipes. (However, the previous code defined 30 pipes wrongly...)

Anyway, this patch fixes it.

Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.68

xen-netfront: avoid crashing on resume after a failure in talk_to_netback()

commit d86b5672b1adb98b4cdd6fbf0224bbfb03db6e2e upstream.

Unavoidable crashes in netfront_resume() and netback_changed() after a
previous fail in talk_to_netback() (e.g. when we fail to read MAC from
xenstore) were discovered. The failure path in talk_to_netback() does
unregister/free for netdev but we don't reset drvdata and we try accessing
it after resume.

Fix the bug by removing the whole xen device completely with
device_unregister(), this guarantees we won't have any calls into netfront
after a failure.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: fix incorrect updating of offset

commit 1d5a31582ef046d3b233f0da1a68ae26519b2f0a upstream.

The variable temp is incorrectly being updated, instead it should
be offset otherwise the loop just reads the same capability value
and loops forever.  Thanks to Alan Stern for pointing out the
correct fix to my original fix.  Fix also cleans up clang warning:

drivers/usb/host/ehci-dbg.c:840:4: warning: Value stored to 'temp'
is never read

Fixes: d49d43174400 ("USB: misc ehci updates")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usbfs: Filter flags passed in from user space

commit 446f666da9f019ce2ffd03800995487e79a91462 upstream.

USBDEVFS_URB_ISO_ASAP must be accepted only for ISO endpoints.
Improve sanity checking.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: devio: Prevent integer overflow in proc_do_submiturb()

commit 57999d1107c1e60c2ca7088f2ac0f819e2f554b3 upstream.

There used to be an integer overflow check in proc_do_submiturb() but
we removed it.  It turns out that it's still required.  The
uurb->buffer_length variable is a signed integer and it's controlled by
the user.  It can lead to an integer overflow when we do:

num_sgs = DIV_ROUND_UP(uurb->buffer_length, USB_SG_SIZE);

If we strip away the macro then that line looks like this:

num_sgs = (uurb->buffer_length + USB_SG_SIZE - 1) / USB_SG_SIZE;
                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
It's the first addition which can overflow.

Fixes: 1129d270cbfb ("USB: Increase usbfs transfer limit")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: Increase usbfs transfer limit

commit 1129d270cbfbb7e2b1ec3dede4a13930bdd10e41 upstream.

Promote a variable keeping track of USB transfer memory usage to a
wider data type and allow for higher bandwidth transfers from a large
number of USB devices connected to a single host.

Signed-off-by: Mateusz Berezecki <mateuszb@fastmail.fm>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: Add type-specific length check of BOS descriptors

commit 81cf4a45360f70528f1f64ba018d61cb5767249a upstream.

As most of BOS descriptors are longer in length than their header
'struct usb_dev_cap_header', comparing solely with it is not sufficient
to avoid out-of-bounds access to BOS descriptors.

This patch adds descriptor type specific length check in
usb_get_bos_descriptor() to fix the issue.

Signed-off-by: Masakazu Mokuno <masakazu.mokuno@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: fix panic in xhci_free_virt_devices_depth_first

commit 80e457699a8dbdd70f2d26911e46f538645c55fc upstream.

Check vdev->real_port 0 to avoid panic
[    9.261347] [<ffffff800884a390>] xhci_free_virt_devices_depth_first+0x58/0x108
[    9.261352] [<ffffff800884a814>] xhci_mem_cleanup+0x1bc/0x570
[    9.261355] [<ffffff8008842de8>] xhci_stop+0x140/0x1c8
[    9.261365] [<ffffff80087ed304>] usb_remove_hcd+0xfc/0x1d0
[    9.261369] [<ffffff80088551c4>] xhci_plat_remove+0x6c/0xa8
[    9.261377] [<ffffff80086e928c>] platform_drv_remove+0x2c/0x70
[    9.261384] [<ffffff80086e6ea0>] __device_release_driver+0x80/0x108
[    9.261387] [<ffffff80086e7a1c>] device_release_driver+0x2c/0x40
[    9.261392] [<ffffff80086e5f28>] bus_remove_device+0xe0/0x120
[    9.261396] [<ffffff80086e2e34>] device_del+0x114/0x210
[    9.261399] [<ffffff80086e9e00>] platform_device_del+0x30/0xa0
[    9.261403] [<ffffff8008810bdc>] dwc3_otg_work+0x204/0x488
[    9.261407] [<ffffff80088133fc>] event_work+0x304/0x5b8
[    9.261414] [<ffffff80080e31b0>] process_one_work+0x148/0x490
[    9.261417] [<ffffff80080e3548>] worker_thread+0x50/0x4a0
[    9.261421] [<ffffff80080e9ea0>] kthread+0xe8/0x100
[    9.261427] [<ffffff8008083680>] ret_from_fork+0x10/0x50

The problem can occur if xhci_plat_remove() is called shortly after
xhci_plat_probe(). While xhci_free_virt_devices_depth_first been
called before the device has been setup and get real_port initialized.
The problem occurred on Hikey960 and was reproduced by Guenter Roeck
on Kevin with chromeos-4.4.

Fixes: ee8665e28e8d ("xhci: free xhci virtual devices with leaf nodes first")
Cc: Guenter Roeck <groeck@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Fan Ning <fanning4@hisilicon.com>
Signed-off-by: Li Rui <lirui39@hisilicon.com>
Signed-off-by: yangdi <yangdi10@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: hub: Cycle HUB power when initialization fails

commit 973593a960ddac0f14f0d8877d2d0abe0afda795 upstream.

Sometimes the USB device gets confused about the state of the initialization and
the connection fails. In particular, the device thinks that it's already set up
and running while the host thinks the device still needs to be configured. To
work around this issue, power-cycle the hub's output to issue a sort of "reset"
to the device. This makes the device restart its state machine and then the
initialization succeeds.

This fixes problems where the kernel reports a list of errors like this:

usb 1-1.3: device not accepting address 19, error -71

The end result is a non-functioning device. After this patch, the sequence
becomes like this:

usb 1-1.3: new high-speed USB device number 18 using ci_hdrc
usb 1-1.3: device not accepting address 18, error -71
usb 1-1.3: new high-speed USB device number 19 using ci_hdrc
usb 1-1.3: device not accepting address 19, error -71
usb 1-1-port3: attempt power cycle
usb 1-1.3: new high-speed USB device number 21 using ci_hdrc
usb-storage 1-1.3:1.2: USB Mass Storage device detected

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf: Update kerneldoc for sync_file_create

commit 24a367348a017555f982a9ee137070a7a821fa97 upstream.

This was missed when adding a dma_fence_get call. While at it also
remove the kerneldoc for the static inline helper - no point
documenting internals down to every detail.

Fixes: 30cd85dd6edc ("dma-buf/sync_file: hold reference to fence when creating sync_file")
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: linux-doc@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161209185309.1682-3-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sync_file: hold reference to fence when creating sync_file

commit 30cd85dd6edc86ea8d8589efb813f1fad41ef233 upstream.

fence referencing was out of balance. It was not taking any ref to the
fence at creating time, but it was putting a reference when freeing the
sync file.

This patch fixes the balancing issue by getting a reference for the fence
when creating the sync_file.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476899313-22241-1-git-send-email-gustavo@padovan.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sw_sync: force signal all unsignaled fences on dying timeline

commit ea4d5a270b57fa8d4871f372ca9b97b7697fdfda upstream.

To avoid hanging userspace components that might have been waiting on the
active fences of the destroyed timeline we need to signal with error all
remaining fences on such timeline.

This restore the default behaviour of the Android sw_sync framework, which
Android still relies on. It was broken on the dma fence conversion a few
years ago and never fixed.

v2: Do not bother with cleanup do the list (Chris Wilson)

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dominik Behr <dbehr@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907190246.16425-2-gustavo@padovan.org
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-fence: Introduce drm_fence_set_error() helper

commit a009e975da5c7d42a7f5eaadc54946eb5f76c9af upstream.

The dma_fence.error field (formerly known as dma_fence.status) is an
optional field that may be set by drivers before calling
dma_fence_signal(). The field can be used to indicate that the fence was
completed in err rather than with success, and is visible to other
consumers of the fence and to userspace via sync_file.

This patch renames the field from status to error so that its meaning is
hopefully more clear (and distinct from dma_fence_get_status() which is
a composite between the error state and signal state) and adds a helper
that validates the preconditions of when it is suitable to adjust the
error field.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-3-chris@chris-wilson.co.uk
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-fence: Wrap querying the fence->status

commit d6c99f4bf093a58d3ab47caaec74b81f18bc4e3f upstream.

The fence->status is an optional field that is only valid once the fence
has been signaled. (Driver may fill the fence->status with an error code
prior to calling dma_fence_signal().) Given the restriction upon its
validity, wrap querying of the fence->status into a helper
dma_fence_get_status().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-2-chris@chris-wilson.co.uk
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-fence: Clear fence->status during dma_fence_init()

commit 83dd1376fd92f33bdeca9e83d479534a4e7f870b upstream.

As the fence->status is an optional field that may be set before
dma_fence_signal() is called to convey that the fence completed with an
error, we have to ensure that it is always set to zero on initialisation
so that the typical use (i.e. unset) always flags a successful completion.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-1-chris@chris-wilson.co.uk
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sw_sync: clean up list before signaling the fence

commit 3792b7c1a70815fe4e954221c096f9278638fd21 upstream.

If userspace already dropped its own reference by closing the sw_sync
fence fd we might end up in a deadlock where
dma_fence_is_signaled_locked() will trigger the release of the fence and
thus try to hold the lock to remove the fence from the list.

dma_fence_is_signaled_locked() tries to release/free the fence and hold
the lock in the process.

We fix that by changing the order operation and clean up the list and
rb-tree first.

v2: Drop fence get/put dance and manipulate the list first (Chris Wilson)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170729152217.8362-2-gustavo@padovan.org
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sw_sync: move timeline_fence_ops around

commit 150b6a9d7d6fffb95c0a5349960a10569e8218b5 upstream.

We are going to use timeline_fence_signaled() in a internal function in
the next commit.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170729152217.8362-1-gustavo@padovan.org
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sw-sync: Use an rbtree to sort fences in the timeline

commit f1e8c67123cf171e2b0357e885e426328b241d7d upstream.

Reduce the list iteration when incrementing the timeline by storing the
fences in increasing order.

v2: Prevent spinlock recursion on free during create
v3: Fixup rebase conflict inside comments that escaped the compiler.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629211253.22766-1-chris@chris-wilson.co.uk
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sw-sync: Fix locking around sync_timeline lists

commit d3862e44daa7a0c94d2f6193502a8c49379acfce upstream.

The sync_pt were not adding themselves atomically to the timeline lists,
corruption imminent.  Only a single list is required to track the
unsignaled sync_pt, so reduce it and rename the lock more appropriately
along with using idiomatic names to distinguish a list from links along
it.

v2: Prevent spinlock recursion on free during create (next patch) and
fixup crossref in kerneldoc

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629210532.5617-1-chris@chris-wilson.co.uk
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sw-sync: sync_pt is private and of fixed size

commit 3b52ce44e720c240afc4c4b03140d7b7811b23bd upstream.

Since sync_pt is only allocated from a single location and is no longer
the base class for fences (that is struct dma_fence) it no longer needs
a generic unsized allocator.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-5-chris@chris-wilson.co.uk
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sw-sync: Reduce irqsave/irqrestore from known context

commit a6aa8fca4d792c72947e341d7842d2f700534335 upstream.

If we know the context under which we are called, then we can use the
simpler form of spin_lock_irq (saving the save/restore).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-4-chris@chris-wilson.co.uk
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sw-sync: Prevent user overflow on timeline advance

commit 8f66d3aa1735bc95ae58d846a157357e8d41abb8 upstream.

The timeline is u32, which limits any single advance to INT_MAX so that
we can detect all fences that need signaling.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-3-chris@chris-wilson.co.uk
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sw-sync: Fix the is-signaled test to handle u32 wraparound

commit 61894b02716f122dd7662d5d89f5b2245ca551e2 upstream.

Use the canonical __dma_fence_is_later() to compare the fence seqno
against the timeline seqno to check if the fence is signaled.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-2-chris@chris-wilson.co.uk
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/dma-fence: Extract __dma_fence_is_later()

commit 8111477663813caa1a4469cfe6afaae36cd04513 upstream.

Often we have the task of comparing two seqno known to be on the same
context, so provide a common __dma_fence_is_later().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-1-chris@chris-wilson.co.uk
[renamed to __fence_is_later() - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fec: fix multicast filtering hardware setup

[ Upstream commit 01f8902bcf3ff124d0aeb88a774180ebcec20ace ]

Fix hardware setup of multicast address hash:
- Never clear the hardware hash (to avoid packet loss)
- Construct the hash register values in software and then write once
to hardware

Signed-off-by: Rui Sousa <rui.sousa@nxp.com>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-netback: vif counters from int/long to u64

[ Upstream commit ebf692f85ff78092cd238166d8d7ec51419f9c02 ]

This patch fixes an issue where the type of counters in the queue(s)
and interface are not in sync (queue counters are int, interface
counters are long), causing incorrect reporting of tx/rx values
of the vif interface and unclear counter overflows.
This patch sets both counters to the u64 type.

Signed-off-by: Mart van Santen <mart@greenhost.nl>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cec: initiator should be the same as the destination for, poll

[ Upstream commit 42980da2eb7eb9695d8efc0c0ef145cbbb993b2c ]

Poll messages that are used to allocate a logical address should
use the same initiator as the destination. Instead, it expected that
the initiator was 0xf which is not according to the standard.

This also had consequences for the message checks in cec_transmit_msg_fh
that incorrectly rejected poll messages with the same initiator and
destination.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-netfront: Improve error handling during initialization

[ Upstream commit e2e004acc7cbe3c531e752a270a74e95cde3ea48 ]

This fixes a crash when running out of grant refs when creating many
queues across many netdevs.

* If creating queues fails (i.e. there are no grant refs available),
call xenbus_dev_fatal() to ensure that the xenbus device is set to the
closed state.
* If no queues are created, don't call xennet_disconnect_backend as
netdev->real_num_tx_queues will not have been set correctly.
* If setup_netfront() fails, ensure that all the queues created are
cleaned up, not just those that have been set up.
* If any queues were set up and an error occurs, call
xennet_destroy_queues() to clean up the napi context.
* If any fatal error occurs, unregister and destroy the netdev to avoid
leaving around a half setup network device.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers

[ Upstream commit 0911d0041c22922228ca52a977d7b0b0159fee4b ]

Some ->page_mkwrite handlers may return VM_FAULT_RETRY as its return
code (GFS2 or Lustre can definitely do this).  However VM_FAULT_RETRY
from ->page_mkwrite is completely unhandled by the mm code and results
in locking and writeably mapping the page which definitely is not what
the caller wanted.

Fix Lustre and block_page_mkwrite_ret() used by other filesystems
(notably GFS2) to return VM_FAULT_NOPAGE instead which results in
bailing out from the fault code, the CPU then retries the access, and we
fault again effectively doing what the handler wanted.

Link: http://lkml.kernel.org/r/20170203150729.15863-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfio/spapr: Fix missing mutex unlock when creating a window

[ Upstream commit 2da64d20a0b20046d688e44f4033efd09157e29d ]

Commit d9c728949ddc ("vfio/spapr: Postpone default window creation")
added an additional exit to the VFIO_IOMMU_SPAPR_TCE_CREATE case and
made it possible to return from tce_iommu_ioctl() without unlocking
container->lock; this fixes the issue.

Fixes: d9c728949ddc ("vfio/spapr: Postpone default window creation")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

be2net: fix initial MAC setting

[ Upstream commit 4993b39ab04b083ff6ee1147e7e7f120feb6bf7f ]

Recent commit 34393529163a ("be2net: fix MAC addr setting on privileged
BE3 VFs") allows privileged BE3 VFs to set its MAC address during
initialization. Although the initial MAC for such VFs is already
programmed by parent PF the subsequent setting performed by VF is OK,
but in certain cases (after fresh boot) this command in VF can fail.

The MAC should be initialized only when:
1) no MAC is programmed (always except BE3 VFs during first init)
2) programmed MAC is different from requested (e.g. MAC is set when
   interface is down). In this case the initial MAC programmed by PF
   needs to be deleted.

The adapter->dev_mac contains MAC address currently programmed in HW so
it should be zeroed when the MAC is deleted from HW and should not be
filled when MAC is set when interface is down in be_mac_addr_set() as
no programming is performed in this case.

Example of failure without the fix (immediately after fresh boot):

# ip link set eth0 up  <- eth0 is BE3 PF
be2net 0000:01:00.0 eth0: Link is Up

# echo 1 > /sys/class/net/eth0/device/sriov_numvfs  <- Create 1 VF
...
be2net 0000:01:04.0: Emulex OneConnect(be3): VF  port 0

# ip link set eth8 up  <- eth8 is created privileged VF
be2net 0000:01:04.0: opcode 59-1 failed:status 1-76
RTNETLINK answers: Input/output error

# echo 0 > /sys/class/net/eth0/device/sriov_numvfs  <- Delete VF
iommu: Removing device 0000:01:04.0 from group 33
...

# echo 1 > /sys/class/net/eth0/device/sriov_numvfs  <- Create it again
iommu: Removing device 0000:01:04.0 from group 33
...

# ip link set eth8 up
be2net 0000:01:04.0 eth8: Link is Up

Initialization is now OK.

v2 - Corrected the comment and condition check suggested by Suresh & Harsha

Fixes: 34393529163a ("be2net: fix MAC addr setting on privileged BE3 VFs")
Cc: Sathya Perla <sathya.perla@broadcom.com>
Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ivan Vecera <cera@cera.cz>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: thunderx: avoid dereferencing xcv when NULL

[ Upstream commit c73e44269369e936165f0f9b61f1f09a11dae01c ]

This fixes the following smatch and coccinelle warnings:

  drivers/net/ethernet/cavium/thunder/thunder_xcv.c:119 xcv_setup_link() error: we previously assumed 'xcv' could be null (see line 118) [smatch]
  drivers/net/ethernet/cavium/thunder/thunder_xcv.c:119:16-20: ERROR: xcv is NULL but dereferenced. [coccinelle]

Fixes: 6465859aba1e66a5 ("net: thunderx: Add RGMII interface type support")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]Pause

[ Upstream commit cf626c3b252b2c9d131be0dd66096ec3bf729e54 ]

As pr commit "net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause"
this phy driver should not set these feature bits.

Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Fixes: 9d162ed69f51 ("net: phy: micrel: add support for KSZ8795")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gtp: fix cross netns recv on gtp socket

[ Upstream commit 3ab1b469e847ba425af3c5ad5068cc94b55b38d0 ]

The use of the passed through netlink src_net to check for a
cross netns operation was wrong. Using the GTP socket and the
GTP netdevice is always correct (even if the netdev has been
moved to new netns after link creation).

Remove the now obsolete net field from gtp_dev.

Signed-off-by: Andreas Schultz <aschultz@tpip.net>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gtp: clear DF bit on GTP packet tx

[ Upstream commit c6ce1d08eede4c2968ed08aafa3165e8e183c5a1 ]

3GPP TS 29.281 and 3GPP TS 29.060 imply that GTP-U packets should be
sent with the DF bit cleared. For example 3GPP TS 29.060, Release 8,
Section 13.2.2:

> Backbone router: Any router in the backbone may fragment the GTP
> packet if needed, according to IPv4.

Signed-off-by: Andreas Schultz <aschultz@tpip.net>
Acked-by: Harald Welte <laforge@netfilter.org>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmet: cancel fatal error and flush async work before free controller

[ Upstream commit 06406d81a2d7cfb8abcc4fa6cdfeb8e5897007c5 ]

Make sure they are not running and we can free the controller
safely.

Signed-off-by: Roy Shterman <roys@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: i2c-cadence: Initialize configuration before probing devices

[ Upstream commit 0e1929dedea36781e25902118c93edd8d8f09af1 ]

The cadence I2C driver calls cdns_i2c_writereg(..) to setup a workaround
in the controller, but did so after calling i2c_add_adapter() which starts
probing devices on the bus. Change the order so that the configuration is
completely finished before using the adapter.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: correct memory barrier usage in tcp_check_space()

[ Upstream commit 56d806222ace4c3aeae516cd7a855340fb2839d8 ]

sock_reset_flag() maps to __clear_bit() not the atomic version clear_bit().
Thus, we need smp_mb(), smp_mb__after_atomic() is not sufficient.

Fixes: 3c7151275c0c ("tcp: add memory barriers to write space paths")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: pl330: fix double lock

[ Upstream commit 91539eb1fda2d530d3b268eef542c5414e54bf1a ]

The static bug finder EBA (http://www.iagoabal.eu/eba/) reported the
following double-lock bug:

    Double lock:
    1. spin_lock_irqsave(pch->lock, flags) at pl330_free_chan_resources:2236;
    2. call to function `pl330_release_channel' immediately after;
    3. call to function `dma_pl330_rqcb' in line 1753;
    4. spin_lock_irqsave(pch->lock, flags) at dma_pl330_rqcb:1505.

I have fixed it as suggested by Marek Szyprowski.

First, I have replaced `pch->lock' with `pl330->lock' in functions
`pl330_alloc_chan_resources' and `pl330_free_chan_resources'. This avoids
the double-lock by acquiring a different lock than `dma_pl330_rqcb'.

NOTE that, as a result, `pl330_free_chan_resources' executes
`list_splice_tail_init' on `pch->work_list' under lock `pl330->lock',
whereas in the rest of the code `pch->work_list' is protected by
`pch->lock'. I don't know if this may cause race conditions. Similarly
`pch->cyclic' is written by `pl330_alloc_chan_resources' under
`pl330->lock' but read by `pl330_tx_submit' under `pch->lock'.

Second, I have removed locking from `pl330_request_channel' and
`pl330_release_channel' functions. Function `pl330_request_channel' is
only called from `pl330_alloc_chan_resources', so the lock is already
held. Function `pl330_release_channel' is called from
`pl330_free_chan_resources', which already holds the lock, and from
`pl330_del'. Function `pl330_del' is called in an error path of
`pl330_probe' and at the end of `pl330_remove', but I assume that there
cannot be concurrent accesses to the protected data at those points.

Signed-off-by: Iago Abal <mail@iagoabal.eu>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix cleanup at module unload

[ Upstream commit 35e22e49a5d6a741ebe7f2dd280b2052c3003ef7 ]

In tipc_server_stop(), we iterate over the connections with limiting
factor as server's idr_in_use. We ignore the fact that this variable
is decremented in tipc_close_conn(), leading to premature exit.

In this commit, we iterate until the we have no connections left.

Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Tested-by: John Thompson <thompa.atl@gmail.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix nametbl_lock soft lockup at module exit

[ Upstream commit 9dc3abdd1f7ea524e8552e0a3ef01219892ed1f4 ]

Commit 333f796235a527 ("tipc: fix a race condition leading to
subscriber refcnt bug") reveals a soft lockup while acquiring
nametbl_lock.

Before commit 333f796235a527, we call tipc_conn_shutdown() from
tipc_close_conn() in the context of tipc_topsrv_stop(). In that
context, we are allowed to grab the nametbl_lock.

Commit 333f796235a527, moved tipc_conn_release (renamed from
tipc_conn_shutdown) to the connection refcount cleanup. This allows
either tipc_nametbl_withdraw() or tipc_topsrv_stop() to the cleanup.

Since tipc_exit_net() first calls tipc_topsrv_stop() and then
tipc_nametble_withdraw() increases the chances for the later to
perform the connection cleanup.

The soft lockup occurs in the call chain of tipc_nametbl_withdraw(),
when it performs the tipc_conn_kref_release() as it tries to grab
nametbl_lock again while holding it already.
tipc_nametbl_withdraw() grabs nametbl_lock
  tipc_nametbl_remove_publ()
    tipc_subscrp_report_overlap()
      tipc_subscrp_send_event()
        tipc_conn_sendmsg()
          << if (con->flags != CF_CONNECTED) we do conn_put(),
             triggering the cleanup as refcount=0. >>
          tipc_conn_kref_release
            tipc_sock_release
              tipc_conn_release
                tipc_subscrb_delete
                  tipc_subscrp_delete
                    tipc_nametbl_unsubscribe << Soft Lockup >>

The previous changes in this series fixes the race conditions fixed
by commit 333f796235a527. Hence we can now revert the commit.

Fixes: 333f796235a52727 ("tipc: fix a race condition leading to subscriber refcnt bug")
Reported-and-Tested-by: John Thompson <thompa.atl@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/qedr: Fix RDMA CM loopback

[ Upstream commit af2b14b8b8ae21b0047a52c767ac8b44f435a280 ]

The loopback logic in RDMA CM packets compares Ethernet addresses and
was accidently inverse.

Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/qedr: Return success when not changing QP state

[ Upstream commit 865cea40b69741c3da2574176876463233b2b67c ]

If the user is requesting us to change the QP state to the same state
that it is already in, return success instead of failure.

Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: don't try to sleep in rate_control_rate_init()

[ Upstream commit 115865fa0826ed18ca04717cf72d0fe874c0fe7f ]

In my previous patch, I missed that rate_control_rate_init() is
called from some places that cannot sleep, so it cannot call
ieee80211_recalc_min_chandef(). Remove that call for now to fix
the context bug, we'll have to find a different way to fix the
minimum channel width issue.

Fixes: 96aa2e7cf126 ("mac80211: calculate min channel width correctly")
Reported-by: Xiaolong Ye (via lkp-robot) <xiaolong.ye@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix unload driver issue for virtual display

[ Upstream commit 3a1d19a29670aa7eb58576a31883d0aa9fb77549 ]

Virtual display doesn't allocate amdgpu_encoder when initializing,
so will get invaild pointer if try to free amdgpu_encoder when
unloading driver.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Set the xcomp_bv when we fake up a XSAVES area

[ Upstream commit 4c833368f0bf748d4147bf301b1f95bc8eccb3c0 ]

I got the following calltrace on a Apollo Lake SoC with 32-bit kernel:

  WARNING: CPU: 2 PID: 261 at arch/x86/include/asm/fpu/internal.h:363 fpu__restore+0x1f5/0x260
  [...]
  Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLIRVPA.X64.0138.B35.1608091058 08/09/2016
  Call Trace:
   dump_stack()
   __warn()
   ? fpu__restore()
   warn_slowpath_null()
   fpu__restore()
   __fpu__restore_sig()
   fpu__restore_sig()
   restore_sigcontext.isra.9()
   sys_sigreturn()
   do_int80_syscall_32()
   entry_INT80_32()

The reason is that a #GP occurs when executing XRSTORS. The root cause
is that we forget to set the xcomp_bv when we fake up the XSAVES area
in the copyin_to_xsaves() function.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/1485075023-30161-1-git-send-email-haokexin@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sctp: fix array overrun read on sctp_timer_tbl

[ Upstream commit 0e73fc9a56f22f2eec4d2b2910c649f7af67b74d ]

The comparison on the timeout can lead to an array overrun
read on sctp_timer_tbl because of an off-by-one error. Fix
this by using < instead of <= and also compare to the array
size rather than SCTP_EVENT_TIMEOUT_MAX.

Fixes CoverityScan CID#1397639 ("Out-of-bounds read")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement

[ Upstream commit 11d8bcef7a0399e1d2519f207fd575fc404306b4 ]

DECON_TV requires STANDALONE_UPDATE after output enabling, otherwise it does
not start. This change is neutral for DECON.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix bug set incorrect value to vce register

[ Upstream commit e05208ded1905e500cd5b369d624b071951c68b9 ]

Set the proper bits for clockgating setup.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qla2xxx: Fix wrong IOCB type assumption

[ Upstream commit bb1181c9a8b46b6f10e749d9ed94480336445d7f ]

qlt_reset is called with Immedidate Notify IOCB only.
Current code wrongly cast it as ATIO IOCB.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm: Fix memory hotplug BUG() on radix

[ Upstream commit 32b53c012e0bfe20b2745962a89db0dc72ef3270 ]

Memory hotplug is leading to hash page table calls, even on radix:

  arch_add_memory
    create_section_mapping
      htab_bolt_mapping
        BUG_ON(!ppc_md.hpte_insert);

To fix, refactor {create,remove}_section_mapping() into hash__ and
radix__ variants. Leave the radix versions stubbed for now.

Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel: Account interrupts for PEBS errors

[ Upstream commit 475113d937adfd150eb82b5e2c5507125a68e7af ]

It's possible to set up PEBS events to get only errors and not
any data, like on SNB-X (model 45) and IVB-EP (model 62)
via 2 perf commands running simultaneously:

    taskset -c 1 ./perf record -c 4 -e branches:pp -j any -C 10

This leads to a soft lock up, because the error path of the
intel_pmu_drain_pebs_nhm() does not account event->hw.interrupt
for error PEBS interrupts, so in case you're getting ONLY
errors you don't have a way to stop the event when it's over
the max_samples_per_tick limit:

  NMI watchdog: BUG: soft lockup - CPU#22 stuck for 22s! [perf_fuzzer:5816]
  ...
  RIP: 0010:[<ffffffff81159232>]  [<ffffffff81159232>] smp_call_function_single+0xe2/0x140
  ...
  Call Trace:
   ? trace_hardirqs_on_caller+0xf5/0x1b0
   ? perf_cgroup_attach+0x70/0x70
   perf_install_in_context+0x199/0x1b0
   ? ctx_resched+0x90/0x90
   SYSC_perf_event_open+0x641/0xf90
   SyS_perf_event_open+0x9/0x10
   do_syscall_64+0x6c/0x1f0
   entry_SYSCALL64_slow_path+0x25/0x25

Add perf_event_account_interrupt() which does the interrupt
and frequency checks and call it from intel_pmu_drain_pebs_nhm()'s
error path.

We keep the pending_kill and pending_wakeup logic only in the
__perf_event_overflow() path, because they make sense only if
there's any data to deliver.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vince@deater.net>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1482931866-6018-2-git-send-email-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4: Fix client recovery when server reboots multiple times

[ Upstream commit c6180a6237174f481dc856ed6e890d8196b6f0fb ]

If the server reboots multiple times, the client should rely on the
server to tell it that it cannot reclaim state as per section 9.6.3.4
in RFC7530 and section 8.4.2.1 in RFC5661.
Currently, the client is being to conservative, and is assuming that
if the server reboots while state recovery is in progress, then it must
ignore state that was not recovered before the reboot.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: prevent skb/txq mismatch

[ Upstream commit dbef53621116474bb883f76f0ba6b7640bc42332 ]

Station structure is considered as not uploaded
(to driver) until drv_sta_state() finishes. This
call is however done after the structure is
attached to mac80211 internal lists and hashes.
This means mac80211 can lookup (and use) station
structure before it is uploaded to a driver.

If this happens (structure exists, but
sta->uploaded is false) fast_tx path can still be
taken. Deep in the fastpath call the sta->uploaded
is checked against to derive "pubsta" argument for
ieee80211_get_txq(). If sta->uploaded is false
(and sta is actually non-NULL) ieee80211_get_txq()
effectively downgraded to vif->txq.

At first glance this may look innocent but coerces
mac80211 into a state that is almost guaranteed
(codel may drop offending skb) to crash because a
station-oriented skb gets queued up on
vif-oriented txq. The ieee80211_tx_dequeue() ends
up looking at info->control.flags and tries to use
txq->sta which in the fail case is NULL.

It's probably pointless to pretend one can
downgrade skb from sta-txq to vif-txq.

Since downgrading unicast traffic to vif->txq must
not be done there's no txq to put a frame on if
sta->uploaded is false. Therefore the code is made
to fall back to regular tx() op path if the
described condition is hit.

Only drivers using wake_tx_queue were affected.

Example crash dump before fix:

 Unable to handle kernel paging request at virtual address ffffe26c
 PC is at ieee80211_tx_dequeue+0x204/0x690 [mac80211]
 [<bf4252a4>] (ieee80211_tx_dequeue [mac80211]) from
 [<bf4b1388>] (ath10k_mac_tx_push_txq+0x54/0x1c0 [ath10k_core])
 [<bf4b1388>] (ath10k_mac_tx_push_txq [ath10k_core]) from
 [<bf4bdfbc>] (ath10k_htt_txrx_compl_task+0xd78/0x11d0 [ath10k_core])
 [<bf4bdfbc>] (ath10k_htt_txrx_compl_task [ath10k_core])
 [<bf51c5a4>] (ath10k_pci_napi_poll+0x54/0xe8 [ath10k_pci])
 [<bf51c5a4>] (ath10k_pci_napi_poll [ath10k_pci]) from
 [<c0572e90>] (net_rx_action+0xac/0x160)

Reported-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: Fix occasional warning from the timer work function

[ Upstream commit 63e41226afc3f7a044b70325566fa86ac3142538 ]

When a VCPU blocks (WFI) and has programmed the vtimer, we program a
soft timer to expire in the future to wake up the vcpu thread when
appropriate.  Because such as wake up involves a vcpu kick, and the
timer expire function can get called from interrupt context, and the
kick may sleep, we have to schedule the kick in the work function.

The work function currently has a warning that gets raised if it turns
out that the timer shouldn't fire when it's run, which was added because
the idea was that in that case the work should never have been cancelled.

However, it turns out that this whole thing is racy and we can get
spurious warnings.  The problem is that we clear the armed flag in the
work function, which may run in parallel with the
kvm_timer_unschedule->timer_disarm() call.  This results in a possible
situation where the timer_disarm() call does not call
cancel_work_sync(), which effectively synchronizes the completion of the
work function with running the VCPU.  As a result, the VCPU thread
proceeds before the work function completees, causing changes to the
timer state such that kvm_timer_should_fire(vcpu) returns false in the
work function.

All we do in the work function is to kick the VCPU, and an occasional
rare extra kick never harmed anyone.  Since the race above is extremely
rare, we don't bother checking if the race happens but simply remove the
check and the clearing of the armed flag from the work function.

Reported-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/exynos/decon5433: set STANDALONE_UPDATE_F also if planes are disabled

[ Upstream commit 821b40b79db7dedbfe15ab330dfd181e661a533f ]

STANDALONE_UPDATE_F should be set if something changed in plane configurations,
including plane disable.
The patch fixes page-faults bugs, caused by decon still using framebuffers
of disabled planes.

v2: fixed clear-bit code (Thx Marek)
v3: use test_and_clear_bit (Thx Joonyoung)

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/exynos/decon5433: update shadow registers iff there are active windows

[ Upstream commit f65a7c9cb3770ed4d3e7c57c66d7032689081b5e ]

Improper usage of DECON_UPDATE register leads to subtle errors.
If it set in decon_commit when there are no active windows it results
in slow registry updates - all subsequent shadow registry updates takes more
than full vblank. On the other side if it is not set when there are
active windows it results in garbage on the screen after suspend/resume of
FB console.

The patch hopefully fixes it.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfs: Don't take a reference on fl->fl_file for LOCK operation

[ Upstream commit 4b09ec4b14a168bf2c687e1f598140c3c11e9222 ]

I have reports of a crash that look like __fput() was called twice for
a NFSv4.0 file.  It seems possible that the state manager could try to
reclaim a lock and take a reference on the fl->fl_file at the same time the
file is being released if, during the close(), a signal interrupts the wait
for outstanding IO while removing locks which then skips the removal
of that lock.

Since 83bfff23e9ed ("nfs4: have do_vfs_lock take an inode pointer") has
removed the need to traverse fl->fl_file->f_inode in nfs4_lock_done(),
taking that reference is no longer necessary.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ravb: Remove Rx overflow log messages

[ Upstream commit 18a3ed59d09cf81a6447aadf6931bf0c9ffec5e0 ]

Remove Rx overflow log messages as in an environment where logging results
in network traffic logging may cause further overflows.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
[simon: reworked changelog]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: calculate min channel width correctly

[ Upstream commit 96aa2e7cf126773b16c6c19b7474a8a38d3c707e ]

In the current minimum chandef code there's an issue in that the
recalculation can happen after rate control is initialized for a
station that has a wider bandwidth than the current chanctx, and
then rate control can immediately start using those higher rates
which could cause problems.

Observe that first of all that this problem is because we don't
take non-associated and non-uploaded stations into account. The
restriction to non-associated is quite pointless and is one of
the causes for the problem described above, since the rate init
will happen before the station is set to associated; no frames
could actually be sent until associated, but the rate table can
already contain higher rates and that might cause problems.

Also, rejecting non-uploaded stations is wrong, since the rate
control can select higher rates for those as well.

Secondly, it's then necessary to recalculate the minimal config
before initializing rate control, so that when rate control is
initialized, the higher rates are already available. This can be
done easily by adding the necessary function call in rate init.

Change-Id: Ib9bc02d34797078db55459d196993f39dcd43070
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix remote numa hits statistics

[ Upstream commit 2df26639e708a88dcc22171949da638a9998f3bc ]

Jia He has noticed that commit b9f00e147f27 ("mm, page_alloc: reduce
branches in zone_statistics") has an unintentional side effect that
remote node allocation requests are accounted as NUMA_MISS rathat than
NUMA_HIT and NUMA_OTHER if such a request doesn't use __GFP_OTHER_NODE.

There are many of these potentially because the flag is used very rarely
while we have many users of __alloc_pages_node.

Fix this by simply ignoring __GFP_OTHER_NODE (it can be removed in a
follow up patch) and treat all allocations that were satisfied from the
preferred zone's node as NUMA_HITS because this is the same node we
requested the allocation from in most cases.  If this is not the local
node then we just account it as NUMA_OTHER rather than NUMA_LOCAL.

One downsize would be that an allocation request for a node which is
outside of the mempolicy nodemask would be reported as a hit which is a
bit weird but that was the case before b9f00e147f27 already.

Fixes: b9f00e147f27 ("mm, page_alloc: reduce branches in zone_statistics")
Link: http://lkml.kernel.org/r/20170102153057.9451-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Jia He <hejianet@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz> # with cbmc[1] superpowers
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qrtr: Mark 'buf' as little endian

[ Upstream commit 3512a1ad56174308a9fd3e10f4b1e3e152e9ec01 ]

Failure to mark this pointer as __le32 causes checkers like
sparse to complain:

net/qrtr/qrtr.c:274:16: warning: incorrect type in assignment (different base types)
net/qrtr/qrtr.c:274:16:    expected unsigned int [unsigned] [usertype] <noident>
net/qrtr/qrtr.c:274:16:    got restricted __le32 [usertype] <noident>
net/qrtr/qrtr.c:275:16: warning: incorrect type in assignment (different base types)
net/qrtr/qrtr.c:275:16:    expected unsigned int [unsigned] [usertype] <noident>
net/qrtr/qrtr.c:275:16:    got restricted __le32 [usertype] <noident>
net/qrtr/qrtr.c:276:16: warning: incorrect type in assignment (different base types)
net/qrtr/qrtr.c:276:16:    expected unsigned int [unsigned] [usertype] <noident>
net/qrtr/qrtr.c:276:16:    got restricted __le32 [usertype] <noident>

Silence it.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libfs: Modify mount_pseudo_xattr to be clear it is not a userspace mount

[ Upstream commit 75422726b0f717d67db3283c2eb5bc14fa2619c5 ]

Add MS_KERNMOUNT to the flags that are passed.
Use sget_userns and force &init_user_ns instead of calling sget so that
even if called from a weird context the internal filesystem will be
considered to be in the intial user namespace.

Luis Ressel reported that the the failure to pass MS_KERNMOUNT into
mount_pseudo broke his in development graphics driver that uses the
generic drm infrastructure.  I am not certain the deriver was bug
free in it's usage of that infrastructure but since
mount_pseudo_xattr can never be triggered by userspace it is clearer
and less error prone, and less problematic for the code to be explicit.

Reported-by: Luis Ressel <aranea@aixah.de>
Tested-by: Luis Ressel <aranea@aixah.de>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/appletalk: Fix kernel memory disclosure

[ Upstream commit ce7e40c432ba84da104438f6799d460a4cad41bc ]

ipddp_route structs contain alignment padding so kernel heap memory
is leaked when they are copied to user space in
ipddp_ioctl(SIOCFINDIPDDPRT). Change kmalloc() to kzalloc() to clear
that memory.

Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>