Linus Torvalds [Mon, 10 Jan 2022 18:02:27 +0000 (10:02 -0800)]
Merge tag 'x86_cleanups_for_v5.17_rc1' of git://git./linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
"The mandatory set of random minor cleanups all over tip"
* tag 'x86_cleanups_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/events/amd/iommu: Remove redundant assignment to variable shift
x86/boot/string: Add missing function prototypes
x86/fpu: Remove duplicate copy_fpstate_to_sigframe() prototype
x86/uaccess: Move variable into switch case statement
Linus Torvalds [Mon, 10 Jan 2022 18:00:03 +0000 (10:00 -0800)]
Merge tag 'x86_misc_for_v5.17_rc1' of git://git./linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
"The pile which we cannot find the proper topic for so we stick it in
x86/misc:
- Add support for decoding instructions which do MMIO accesses in
order to use it in SEV and TDX guests
- An include fix and reorg to allow for removing set_fs in UML later"
* tag 'x86_misc_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mtrr: Remove the mtrr_bp_init() stub
x86/sev-es: Use insn_decode_mmio() for MMIO implementation
x86/insn-eval: Introduce insn_decode_mmio()
x86/insn-eval: Introduce insn_get_modrm_reg_ptr()
x86/insn-eval: Handle insn_get_opcode() failure
Linus Torvalds [Mon, 10 Jan 2022 17:51:38 +0000 (09:51 -0800)]
Merge tag 'x86_mm_for_v5.17_rc1' of git://git./linux/kernel/git/tip/tip
Pull x86 mm updates from Borislav Petkov:
- Flush *all* mappings from the TLB after switching to the trampoline
pagetable to prevent any stale entries' presence
- Flush global mappings from the TLB, in addition to the CR3-write,
after switching off of the trampoline_pgd during boot to clear the
identity mappings
- Prevent instrumentation issues resulting from the above changes
* tag 'x86_mm_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Prevent early boot triple-faults with instrumentation
x86/mm: Include spinlock_t definition in pgtable.
x86/mm: Flush global TLB when switching to trampoline page-table
x86/mm/64: Flush global TLB on boot and AP bringup
x86/realmode: Add comment for Global bit usage in trampoline_pgd
x86/mm: Add missing <asm/cpufeatures.h> dependency to <asm/page_64.h>
Linus Torvalds [Mon, 10 Jan 2022 17:44:09 +0000 (09:44 -0800)]
Merge tag 'x86_sgx_for_v5.17_rc1' of git://git./linux/kernel/git/tip/tip
Pull x86 SGX updates from Borislav Petkov:
- Add support for handling hw errors in SGX pages: poisoning,
recovering from poison memory and error injection into SGX pages
- A bunch of changes to the SGX selftests to simplify and allow of SGX
features testing without the need of a whole SGX software stack
- Add a sysfs attribute which is supposed to show the amount of SGX
memory in a NUMA node, similar to what /proc/meminfo is to normal
memory
- The usual bunch of fixes and cleanups too
* tag 'x86_sgx_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/sgx: Fix NULL pointer dereference on non-SGX systems
selftests/sgx: Fix corrupted cpuid macro invocation
x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node
x86/sgx: Fix minor documentation issues
selftests/sgx: Add test for multiple TCS entry
selftests/sgx: Enable multiple thread support
selftests/sgx: Add page permission and exception test
selftests/sgx: Rename test properties in preparation for more enclave tests
selftests/sgx: Provide per-op parameter structs for the test enclave
selftests/sgx: Add a new kselftest: Unclobbered_vdso_oversubscribed
selftests/sgx: Move setup_test_encl() to each TEST_F()
selftests/sgx: Encpsulate the test enclave creation
selftests/sgx: Dump segments and /proc/self/maps only on failure
selftests/sgx: Create a heap for the test enclave
selftests/sgx: Make data measurement for an enclave segment optional
selftests/sgx: Assign source for each segment
selftests/sgx: Fix a benign linker warning
x86/sgx: Add check for SGX pages to ghes_do_memory_failure()
x86/sgx: Add hook to error injection address validation
x86/sgx: Hook arch_memory_failure() into mainline code
...
Linus Torvalds [Mon, 10 Jan 2022 17:42:36 +0000 (09:42 -0800)]
Merge tag 'x86_cache_for_v5.17_rc1' of git://git./linux/kernel/git/tip/tip
Pull x86 resource control fixlet from Borislav Petkov:
"A minor code cleanup removing a redundant assignment"
* tag 'x86_cache_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Remove redundant assignment to variable chunks
Linus Torvalds [Mon, 10 Jan 2022 17:33:40 +0000 (09:33 -0800)]
Merge tag 'x86_sev_for_v5.17_rc1' of git://git./linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
"The accumulated pile of x86/sev generalizations and cleanups:
- Share the SEV string unrolling logic with TDX as TDX guests need it
too
- Cleanups and generalzation of code shared by SEV and TDX"
* tag 'x86_sev_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Move common memory encryption code to mem_encrypt.c
x86/sev: Rename mem_encrypt.c to mem_encrypt_amd.c
x86/sev: Use CC_ATTR attribute to generalize string I/O unroll
x86/sev: Remove do_early_exception() forward declarations
x86/head64: Carve out the guest encryption postprocessing into a helper
x86/sev: Get rid of excessive use of defines
x86/sev: Shorten GHCB terminate macro names
Linus Torvalds [Mon, 10 Jan 2022 17:21:36 +0000 (09:21 -0800)]
Merge tag 'x86_platform_for_v5.17_rc1' of git://git./linux/kernel/git/tip/tip
Pull x86 platform fix from Borislav Petkov:
"A single DT compatibility fix for the Intel media processor CE4100
driver"
* tag 'x86_platform_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
Linus Torvalds [Mon, 10 Jan 2022 17:09:36 +0000 (09:09 -0800)]
Merge tag 'x86_paravirt_for_v5.17_rc1' of git://git./linux/kernel/git/tip/tip
Pull x86 paravirtualization fix from Borislav Petkov:
"Define the INTERRUPT_RETURN macro only when CONFIG_XEN_PV is enabled
as it is its only user"
* tag 'x86_paravirt_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/paravirt: Fix build PARAVIRT_XXL=y without XEN_PV
Linus Torvalds [Mon, 10 Jan 2022 17:05:26 +0000 (09:05 -0800)]
Merge tag 'x86_fpu_for_v5.17_rc1' of git://git./linux/kernel/git/tip/tip
Pull x86 fpu update from Borislav Petkov:
"A single x86/fpu update for 5.17:
- Exclude AVX opmask registers use from AVX512 state tracking as they
don't contribute to frequency throttling"
* tag 'x86_fpu_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Correct AVX512 state tracking
Linus Torvalds [Mon, 10 Jan 2022 16:59:33 +0000 (08:59 -0800)]
Merge tag 'm68k-for-v5.17-tag1' of git://git./linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- enable memtest functionality
- defconfig updates
* tag 'm68k-for-v5.17-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v5.16-rc1
m68k: Enable memtest functionality
Linus Torvalds [Mon, 10 Jan 2022 16:58:16 +0000 (08:58 -0800)]
Merge tag 's390-5.17-1' of git://git./linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
"Besides all the small improvements and cleanups the most notable part
is the fast vector/SIMD implementation of the ChaCha20 stream cipher,
which is an adaptation of Andy Polyakov's code for the kernel.
Summary:
- add fast vector/SIMD implementation of the ChaCha20 stream cipher,
which mainly adapts Andy Polyakov's code for the kernel
- add status attribute to AP queue device so users can easily figure
out its status
- fix race in page table release code, and and lots of documentation
- remove uevent suppress from cio device driver, since it turned out
that it generated more problems than it solved problems
- quite a lot of virtual vs physical address confusion fixes
- various other small improvements and cleanups all over the place"
* tag 's390-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits)
s390/dasd: use default_groups in kobj_type
s390/sclp_sd: use default_groups in kobj_type
s390/pci: simplify __pciwb_mio() inline asm
s390: remove unused TASK_SIZE_OF
s390/crash_dump: fix virtual vs physical address handling
s390/crypto: fix compile error for ChaCha20 module
s390/mm: check 2KB-fragment page on release
s390/mm: better annotate 2KB pagetable fragments handling
s390/mm: fix 2KB pgtable release race
s390/sclp: release SCLP early buffer after kernel initialization
s390/nmi: disable interrupts on extended save area update
s390/zcrypt: CCA control CPRB sending
s390/disassembler: update opcode table
s390/uv: fix memblock virtual vs physical address confusion
s390/smp: fix memblock_phys_free() vs memblock_free() confusion
s390/sclp: fix memblock_phys_free() vs memblock_free() confusion
s390/exit: remove dead reference to do_exit from copy_thread
s390/ap: add missing virt_to_phys address conversion
s390/pgalloc: use pointers instead of unsigned long values
s390/pgalloc: add virt/phys address handling to base asce functions
...
Linus Torvalds [Mon, 10 Jan 2022 16:49:37 +0000 (08:49 -0800)]
Merge tag 'arm64-upstream' of git://git./linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- KCSAN enabled for arm64.
- Additional kselftests to exercise the syscall ABI w.r.t. SVE/FPSIMD.
- Some more SVE clean-ups and refactoring in preparation for SME
support (scalable matrix extensions).
- BTI clean-ups (SYM_FUNC macros etc.)
- arm64 atomics clean-up and codegen improvements.
- HWCAPs for FEAT_AFP (alternate floating point behaviour) and
FEAT_RPRESS (increased precision of reciprocal estimate and
reciprocal square root estimate).
- Use SHA3 instructions to speed-up XOR.
- arm64 unwind code refactoring/unification.
- Avoid DC (data cache maintenance) instructions when DCZID_EL0.DZP ==
1 (potentially set by a hypervisor; user-space already does this).
- Perf updates for arm64: support for CI-700, HiSilicon PCIe PMU,
Marvell CN10K LLC-TAD PMU, miscellaneous clean-ups.
- Other fixes and clean-ups; highlights: fix the handling of erratum
1418040, correct the calculation of the nomap region boundaries,
introduce io_stop_wc() mapped to the new DGH instruction (data
gathering hint).
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
arm64: Use correct method to calculate nomap region boundaries
arm64: Drop outdated links in comments
arm64: perf: Don't register user access sysctl handler multiple times
drivers: perf: marvell_cn10k: fix an IS_ERR() vs NULL check
perf/smmuv3: Fix unused variable warning when CONFIG_OF=n
arm64: errata: Fix exec handling in erratum
1418040 workaround
arm64: Unhash early pointer print plus improve comment
asm-generic: introduce io_stop_wc() and add implementation for ARM64
arm64: Ensure that the 'bti' macro is defined where linkage.h is included
arm64: remove __dma_*_area() aliases
docs/arm64: delete a space from tagged-address-abi
arm64: Enable KCSAN
kselftest/arm64: Add pidbench for floating point syscall cases
arm64/fp: Add comments documenting the usage of state restore functions
kselftest/arm64: Add a test program to exercise the syscall ABI
kselftest/arm64: Allow signal tests to trigger from a function
kselftest/arm64: Parameterise ptrace vector length information
arm64/sve: Minor clarification of ABI documentation
arm64/sve: Generalise vector length configuration prctl() for SME
arm64/sve: Make sysctl interface for SVE reusable by SME
...
Linus Torvalds [Mon, 10 Jan 2022 16:42:28 +0000 (08:42 -0800)]
Merge tag 'asm-generic-5.17' of git://git./linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"A few minor cleanups for cross-architecture code: Alexandre Ghiti
deals with removing some leftovers from drivers and features that have
been removed, and Wasin Thonkaew has a cosmetic change"
* tag 'asm-generic-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic/error-injection.h: fix a spelling mistake, and a coding style issue
arch: Remove leftovers from prism54 wireless driver
arch: Remove leftovers from mandatory file locking
Documentation, arch: Remove leftovers from CIFS_WEAK_PW_HASH
Documentation, arch: Remove leftovers from raw device
Linus Torvalds [Mon, 10 Jan 2022 16:32:37 +0000 (08:32 -0800)]
Merge tag 'newsoc-5.17' of git://git./linux/kernel/git/soc/soc
Pull RISC-V SoC updates from Arnd Bergmann:
"Add support for StarFive JH7100 RISC-V SoC
This adds support for the StarFive JH7100, including the necessary
device drivers and DT files for the BeagleV Starlight prototype board,
with additional boards to be added later. This SoC promises to be the
first usable low-cost platform for RISC-V.
I've taken this through the SoC tree in the anticipation of adding a
few other Arm based SoCs as well, but those did not pass the review in
time, so it's only this one"
* tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
reset: starfive-jh7100: Fix 32bit compilation
RISC-V: Add BeagleV Starlight Beta device tree
RISC-V: Add initial StarFive JH7100 device tree
serial: 8250_dw: Add StarFive JH7100 quirk
dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uarts
pinctrl: starfive: Add pinctrl driver for StarFive SoCs
dt-bindings: pinctrl: Add StarFive JH7100 bindings
dt-bindings: pinctrl: Add StarFive pinctrl definitions
reset: starfive-jh7100: Add StarFive JH7100 reset driver
dt-bindings: reset: Add Starfive JH7100 reset bindings
dt-bindings: reset: Add StarFive JH7100 reset definitions
clk: starfive: Add JH7100 clock generator driver
dt-bindings: clock: starfive: Add JH7100 bindings
dt-bindings: clock: starfive: Add JH7100 clock definitions
dt-bindings: interrupt-controller: Add StarFive JH7100 plic
dt-bindings: timer: Add StarFive JH7100 clint
RISC-V: Add StarFive SoC Kconfig option
Linus Torvalds [Mon, 10 Jan 2022 16:24:40 +0000 (08:24 -0800)]
Merge tag 'dt-5.17' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms. All the
newly supported SoCs belong into existing families this time:
- Qualcomm gets support for two newly announced platforms, both of
which can now work in production environments: the SDX65 5G modem
that can run a minimal Linux on its Cortex-A7 core, and the
Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3 family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8
series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we
have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while
MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two new
SoCs, plus a number of Chromebook variants and phones based on the
Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia
devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit chips
out of the box, including a number of ASUS Transformer tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top box
based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908"
* tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits)
Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"
arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
arm64: dts: qcom: sm8450-qrd: Enable USB nodes
arm64: dts: qcom: sm8450: Add usb nodes
ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
ARM: dts: aspeed: add LCLK setting into LPC IBT node
ARM: dts: aspeed: p10: Add TPM device
ARM: dts: aspeed: p10: Enable USB host ports
ARM: dts: aspeed: Add TYAN S8036 BMC machine
ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
ARM: dts: aspeed: Adding Facebook Bletchley BMC
ARM: dts: aspeed: g220a: Enable secondary flash
ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
ARM: dts: aspeed: Add secure boot controller node
dt-bindings: aspeed: Add Secure Boot Controller bindings
ARM: dts: Remove "spidev" nodes
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
...
Linus Torvalds [Mon, 10 Jan 2022 16:13:52 +0000 (08:13 -0800)]
Merge tag 'drivers-5.17' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as
well as a new USIv2 driver that handles various types of serial
communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers,
as well as memory controller support for RZ/G2L (R9A07G044).
- Apple M1 gains support for the PMGR power management driver"
* tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
soc: qcom: rpmh-rsc: Fix typo in a comment
soc: qcom: socinfo: Add SM6350 and SM7225
dt-bindings: arm: msm: Don't mark LLCC interrupt as required
dt-bindings: firmware: scm: Add SM6350 compatible
dt-bindings: arm: msm: Add LLCC for SM6350
soc: qcom: rpmhpd: Sort power-domain definitions and lists
soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
soc: qcom: rpmhpd: Rename rpmhpd struct names
soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
soc: qcom: socinfo: add SM8450 ID
soc: qcom: rpmhpd: Add SM8450 power domains
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
soc: qcom: smem: Update max processor count
dt-bindings: arm: qcom: Document SM8450 SoC and boards
dt-bindings: firmware: scm: Add SM8450 compatible
dt-bindings: arm: cpus: Add kryo780 compatible
soc: qcom: rpmpd: Add support for sm6125
dt-bindings: qcom-rpmpd: Add sm6125 power domains
soc: qcom: aoss: constify static struct thermal_cooling_device_ops
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
...
Linus Torvalds [Mon, 10 Jan 2022 16:12:26 +0000 (08:12 -0800)]
Merge tag 'defconfig-5.17' of git://git./linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"These are the usual changes to enable newly added driver by default,
and to do some housekeeping around changing Kconfig symbols"
* tag 'defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: Enable Samsung I2C driver
ARM: configs: at91: Enable crypto software implementations
ARM: configs: at91: sama7: Enable SPI NOR and QSPI controller
ARM: config: multi v7: Enable NVIDIA Tegra20 APB DMA driver
ARM: config: multi v7: Enable NVIDIA Tegra20 S/PDIF driver
ARM: tegra_defconfig: Enable S/PDIF driver
ARM: imx_v6_v7_defconfig: Enable for DHCOM devices required RTC_DRV_RV3029C2
ARM: config: multi v7: Enable display drivers used by Tegra devices
ARM: tegra_defconfig: Enable drivers wanted by Acer Chromebooks and ASUS tablets
ARM: configs: gemini: Activate crypto driver
arm64: defconfig: enable drivers for booting i.MX8ULP
arm64: defconfig: Enable R-Car S4-8
arm64: defconfig: enable drivers for TQ TQMa8MxML-MBa8Mx
arm64: defconfig: Enable OV5640
arm64: defconfig: Enable VIDEO_IMX_MEDIA
Linus Torvalds [Mon, 10 Jan 2022 16:10:20 +0000 (08:10 -0800)]
Merge tag 'soc-5.17' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"These are all minor bug fixes and cleanups to code in arch/arm and
arch/arm64 that is specific to one SoC, updating Kconfig symbols, the
MAINTAINERS file, and removing some dead code"
* tag 'soc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: exynos: Enable Exynos Multi-Core Timer driver
ARM: ixp4xx: remove unused header file pata_ixp4xx_cf.h
ARM: ixp4xx: remove dead configs CPU_IXP43X and CPU_IXP46X
MAINTAINERS: Add Florian as BCM5301X and BCM53573 maintainer
ARM: samsung: Remove HAVE_S3C2410_I2C and use direct dependencies
ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART
ARM: imx: remove dead left-over from i.MX{27,31,35} removal
ARM: s3c: add one more "fallthrough" statement in Jive
ARM: s3c: include header for prototype of s3c2410_modify_misccr
ARM: shmobile: rcar-gen2: Add missing of_node_put()
Linus Torvalds [Sun, 9 Jan 2022 22:55:34 +0000 (14:55 -0800)]
Linux 5.16
Linus Torvalds [Sun, 9 Jan 2022 18:49:12 +0000 (10:49 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
"A small fixup to the Zinitix touchscreen driver to avoid enabling the
IRQ line before we successfully requested it"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: zinitix - make sure the IRQ is allocated before it gets enabled
Linus Torvalds [Sun, 9 Jan 2022 18:43:16 +0000 (10:43 -0800)]
Merge tag 'soc-fixes-5.16-5' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fix from Olof Johansson:
"One more fix for 5.16
I had missed one patch when I sent up what I thought was the last
batch of fixes for this release. This one fixes issues on the
Raspberry Pi platforms due to gpio init changes this release, so
hopefully we can get it merged before final release is cut"
* tag 'soc-fixes-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: gpio-ranges property is now required
Linus Torvalds [Sun, 9 Jan 2022 18:37:07 +0000 (10:37 -0800)]
Merge tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Revert "libtraceevent: Increase libtraceevent logging when verbose",
breaks the build with libtraceevent-1.3.0, i.e. when building with
'LIBTRACEEVENT_DYNAMIC=1'.
- Avoid early exit in 'perf trace' due to running SIGCHLD handler
before it makes sense to. It can happen when using a BPF source code
event that have to be first built into an object file.
* tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
Revert "libtraceevent: Increase libtraceevent logging when verbose"
perf trace: Avoid early exit due to running SIGCHLD handler before it makes sense to
Len Brown [Sun, 9 Jan 2022 18:11:37 +0000 (13:11 -0500)]
Revert "drm/amdgpu: stop scheduler when calling hw_fini (v2)"
This reverts commit
f7d6779df642720e22bffd449e683bb8690bd3bf.
This bisected regression has impacted suspend-resume stability
since 5.15-rc1. It regressed -stable via 5.14.10.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215315
Fixes: f7d6779df64 ("drm/amdgpu: stop scheduler when calling hw_fini (v2)")
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # 5.14+
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nikita Travkin [Sun, 9 Jan 2022 07:19:19 +0000 (23:19 -0800)]
Input: zinitix - make sure the IRQ is allocated before it gets enabled
Since irq request is the last thing in the driver probe, it happens
later than the input device registration. This means that there is a
small time window where if the open method is called the driver will
attempt to enable not yet available irq.
Fix that by moving the irq request before the input device registration.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 26822652c85e ("Input: add zinitix touchscreen driver")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20220106072840.36851-2-nikita@trvn.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Phil Elwell [Tue, 4 Jan 2022 17:02:47 +0000 (18:02 +0100)]
ARM: dts: gpio-ranges property is now required
Since [1], added in 5.7, the absence of a gpio-ranges property has
prevented GPIOs from being restored to inputs when released.
Add those properties for BCM283x and BCM2711 devices.
[1] commit
2ab73c6d8323 ("gpio: Support GPIO controllers without
pin-ranges")
Link: https://lore.kernel.org/r/20220104170247.956760-1-linus.walleij@linaro.org
Fixes: 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges")
Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211206092237.4105895-3-phil@raspberrypi.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Sat, 8 Jan 2022 20:56:16 +0000 (12:56 -0800)]
Merge tag 'soc-fixes-5.16-4' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A few more fixes have come in, nothing overly severe but would be good
to get in by final release:
- More specific compatible fields on the qspi controller for socfpga,
to enable quirks in the driver
- A runtime PM fix for Renesas to fix mismatched reference counts on
errors"
* tag 'soc-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: socfpga: change qspi to "intel,socfpga-qspi"
dt-bindings: spi: cadence-quadspi: document "intel,socfpga-qspi"
reset: renesas: Fix Runtime PM usage
Linus Torvalds [Sat, 8 Jan 2022 20:12:58 +0000 (12:12 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Fix the regression with AMD GPU suspend by reverting the
handling of bus regulators in the I2C core.
Also, there is a fix for the MPC driver to prevent an
out-of-bound-access"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: core: support bus regulator controlling in adapter"
i2c: mpc: Avoid out of bounds memory access
Linus Torvalds [Sat, 8 Jan 2022 19:39:53 +0000 (11:39 -0800)]
Merge tag 'for-v5.16-rc' of git://git./linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
"Three fixes for the 5.16 cycle:
- Avoid going beyond last capacity in the power-supply core
- Replace 1E6L with NSEC_PER_MSEC to avoid floating point calculation
in LLVM resulting in a build failure
- Fix ADC measurements in bq25890 charger driver"
* tag 'for-v5.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: reset: ltc2952: Fix use of floating point literals
power: bq25890: Enable continuous conversion for ADC at charging
power: supply: core: Break capacity loop
Linus Torvalds [Sat, 8 Jan 2022 18:56:47 +0000 (10:56 -0800)]
Merge tag 'xfs-5.16-fixes-4' of git://git./fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
- Make the old ALLOCSP ioctl behave in a consistent manner with newer
syscalls like fallocate.
* tag 'xfs-5.16-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: map unwritten blocks in XFS_IOC_{ALLOC,FREE}SP just like fallocate
Greg Kroah-Hartman [Thu, 6 Jan 2022 09:54:01 +0000 (10:54 +0100)]
s390/dasd: use default_groups in kobj_type
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the s390 dasd sysfs code to use default_groups field
which has been the preferred way since commit
aa30f47cf666 ("kobject:
Add support for default attribute groups to kobj_type") so that we can
soon get rid of the obsolete default_attrs field.
Cc: Stefan Haberland <sth@linux.ibm.com>
Cc: Jan Hoeppner <hoeppner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220106095401.3274637-1-gregkh@linuxfoundation.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Greg Kroah-Hartman [Thu, 6 Jan 2022 09:52:52 +0000 (10:52 +0100)]
s390/sclp_sd: use default_groups in kobj_type
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the sclp_sd sysfs code to use default_groups field which
has been the preferred way since commit
aa30f47cf666 ("kobject: Add
support for default attribute groups to kobj_type") so that we can
soon get rid of the obsolete default_attrs field.
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220106095252.3273905-1-gregkh@linuxfoundation.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Linus Torvalds [Fri, 7 Jan 2022 23:58:06 +0000 (15:58 -0800)]
Merge branch 'for-5.16-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"This contains the cgroup.procs permission check fixes so that they use
the credentials at the time of open rather than write, which also
fixes the cgroup namespace lifetime bug"
* 'for-5.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
selftests: cgroup: Test open-time cgroup namespace usage for migration checks
selftests: cgroup: Test open-time credential usage for migration checks
selftests: cgroup: Make cg_create() use 0755 for permission instead of 0644
cgroup: Use open-time cgroup namespace for process migration perm checks
cgroup: Allocate cgroup_file_ctx for kernfs_open_file->priv
cgroup: Use open-time credentials for process migraton perm checks
Linus Torvalds [Fri, 7 Jan 2022 21:28:20 +0000 (13:28 -0800)]
Merge tag 'block-5.16-2022-01-07' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Just the md bitmap regression this time"
* tag 'block-5.16-2022-01-07' of git://git.kernel.dk/linux-block:
md/raid1: fix missing bitmap update w/o WriteMostly devices
Linus Torvalds [Fri, 7 Jan 2022 21:22:58 +0000 (13:22 -0800)]
Merge tag 'edac_urgent_for_v5.16' of git://git./linux/kernel/git/ras/ras
Pull EDAC fix from Tony Luck:
"Fix 10nm EDAC driver to release and unmap resources on systems without
HBM"
* tag 'edac_urgent_for_v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/i10nm: Release mdev/mbase when failing to detect HBM
Wolfram Sang [Thu, 6 Jan 2022 12:24:52 +0000 (13:24 +0100)]
Revert "i2c: core: support bus regulator controlling in adapter"
This largely reverts commit
5a7b95fb993ec399c8a685552aa6a8fc995c40bd. It
breaks suspend with AMD GPUs, and we couldn't incrementally fix it. So,
let's remove the code and go back to the drawing board. We keep the
header extension to not break drivers already populating the regulator.
We expect to re-add the code handling it soon.
Fixes: 5a7b95fb993e ("i2c: core: support bus regulator controlling in adapter")
Reported-by: "Tareque Md.Hanif" <tarequemd.hanif@yahoo.com>
Link: https://lore.kernel.org/r/1295184560.182511.1639075777725@mail.yahoo.com
Reported-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Link: https://lore.kernel.org/r/7143a7147978f4104171072d9f5225d2ce355ec1.camel@yandex.ru
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1850
Tested-by: "Tareque Md.Hanif" <tarequemd.hanif@yahoo.com>
Tested-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: <stable@vger.kernel.org> # 5.14+
Arnaldo Carvalho de Melo [Fri, 7 Jan 2022 19:02:54 +0000 (16:02 -0300)]
Revert "libtraceevent: Increase libtraceevent logging when verbose"
This reverts commit
08efcb4a638d260ef7fcbae64ecf7ceceb3f1841.
This breaks the build as it will prefer using libbpf-devel header files,
even when not using LIBBPF_DYNAMIC=1, breaking the build.
This was detected on OpenSuSE Tumbleweed with libtraceevent-devel 1.3.0,
as described by Jiri Slaby:
=======================================================================
It breaks build with LIBTRACEEVENT_DYNAMIC and version 1.3.0:
> util/debug.c: In function ‘perf_debug_option’:
> util/debug.c:243:17: error: implicit declaration of function
‘tep_set_loglevel’ [-Werror=implicit-function-declaration]
> 243 | tep_set_loglevel(TEP_LOG_INFO);
> | ^~~~~~~~~~~~~~~~
> util/debug.c:243:34: error: ‘TEP_LOG_INFO’ undeclared (first use in this
function); did you mean ‘TEP_PRINT_INFO’?
> 243 | tep_set_loglevel(TEP_LOG_INFO);
> | ^~~~~~~~~~~~
> | TEP_PRINT_INFO
> util/debug.c:243:34: note: each undeclared identifier is reported only once
for each function it appears in
> util/debug.c:245:34: error: ‘TEP_LOG_DEBUG’ undeclared (first use in this
function)
> 245 | tep_set_loglevel(TEP_LOG_DEBUG);
> | ^~~~~~~~~~~~~
> util/debug.c:247:34: error: ‘TEP_LOG_ALL’ undeclared (first use in this
function)
> 247 | tep_set_loglevel(TEP_LOG_ALL);
> | ^~~~~~~~~~~
It is because the gcc's command line looks like:
gcc
...
-I/home/abuild/rpmbuild/BUILD/tools/lib/
...
-DLIBTRACEEVENT_VERSION=65790
...
=======================================================================
The proper way to fix this is more involved and so not suitable for this
late in the 5.16-rc stage.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/lkml/bc2b0786-8965-1bcd-2316-9d9bb37b9c31@kernel.org
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/lkml/YddGjjmlMZzxUZbN@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 6 Jan 2022 22:20:30 +0000 (23:20 +0100)]
perf trace: Avoid early exit due to running SIGCHLD handler before it makes sense to
When running 'perf trace' with an BPF object like:
# perf trace -e openat,tools/perf/examples/bpf/hello.c
the event parsing eventually calls llvm__get_kbuild_opts() that runs a
script and that ends up with SIGCHLD delivered to the 'perf trace'
handler, which assumes the workload process is done and quits 'perf
trace'.
Move the SIGCHLD handler setup directly to trace__run(), where the event
is parsed and the object is already compiled.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Christy Lee <christyc.y.lee@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220106222030.227499-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Fri, 7 Jan 2022 17:28:37 +0000 (09:28 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two small fixes for x86:
- lockdep WARN due to missing lock nesting annotation
- NULL pointer dereference when accessing debugfs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Check for rmaps allocation
KVM: SEV: Mark nested locking of kvm->lock
Linus Torvalds [Fri, 7 Jan 2022 17:17:53 +0000 (09:17 -0800)]
Merge tag 'drm-fixes-2022-01-07' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"There is only the amdgpu runtime pm regression fix in here:
amdgpu:
- suspend/resume fix
- fix runtime PM regression"
* tag 'drm-fixes-2022-01-07' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: disable runpm if we are the primary adapter
fbdev: fbmem: add a helper to determine if an aperture is used by a fw fb
drm/amd/pm: keep the BACO feature enabled for suspend
Nikunj A Dadhania [Wed, 5 Jan 2022 04:03:37 +0000 (09:33 +0530)]
KVM: x86: Check for rmaps allocation
With TDP MMU being the default now, access to mmu_rmaps_stat debugfs
file causes following oops:
BUG: kernel NULL pointer dereference, address:
0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 PID: 3185 Comm: cat Not tainted 5.16.0-rc4+ #204
RIP: 0010:pte_list_count+0x6/0x40
Call Trace:
<TASK>
? kvm_mmu_rmaps_stat_show+0x15e/0x320
seq_read_iter+0x126/0x4b0
? aa_file_perm+0x124/0x490
seq_read+0xf5/0x140
full_proxy_read+0x5c/0x80
vfs_read+0x9f/0x1a0
ksys_read+0x67/0xe0
__x64_sys_read+0x19/0x20
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fca6fc13912
Return early when rmaps are not present.
Reported-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220105040337.4234-1-nikunj@amd.com>
Cc: stable@vger.kernel.org
Fixes: 3bcd0662d66f ("KVM: X86: Introduce mmu_rmaps_stat per-vm debugfs file")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Wed, 5 Jan 2022 06:41:03 +0000 (22:41 -0800)]
KVM: SEV: Mark nested locking of kvm->lock
Both source and dest vms' kvm->locks are held in sev_lock_two_vms.
Mark one with a different subtype to avoid false positives from lockdep.
Fixes: c9d61dcb0bc26 (KVM: SEV: accept signals in sev_lock_two_vms)
Reported-by: Yiru Xu <xyru1999@gmail.com>
Tested-by: Jinrong Liang <cloudliang@tencent.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <
1641364863-26331-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dave Hansen [Tue, 4 Jan 2022 17:15:27 +0000 (09:15 -0800)]
x86/sgx: Fix NULL pointer dereference on non-SGX systems
== Problem ==
Nathan Chancellor reported an oops when aceessing the
'sgx_total_bytes' sysfs file:
https://lore.kernel.org/all/YbzhBrimHGGpddDM@archlinux-ax161/
The sysfs output code accesses the sgx_numa_nodes[] array
unconditionally. However, this array is allocated during SGX
initialization, which only occurs on systems where SGX is
supported.
If the sysfs file is accessed on systems without SGX support,
sgx_numa_nodes[] is NULL and an oops occurs.
== Solution ==
To fix this, hide the entire nodeX/x86/ attribute group on
systems without SGX support using the ->is_visible attribute
group callback.
Unfortunately, SGX is initialized via a device_initcall() which
occurs _after_ the ->is_visible() callback. Instead of moving
SGX initialization earlier, call sysfs_update_group() during
SGX initialization to update the group visiblility.
This update requires moving the SGX sysfs code earlier in
sgx/main.c. There are no code changes other than the addition of
arch_update_sysfs_visibility() and a minor whitespace fixup to
arch_node_attr_is_visible() which checkpatch caught.
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-sgx@vger.kernel.org
Cc: x86@kernel.org
Fixes: 50468e431335 ("x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/20220104171527.5E8416A8@davehans-spike.ostc.intel.com
Niklas Schnelle [Wed, 5 Jan 2022 15:10:54 +0000 (16:10 +0100)]
s390/pci: simplify __pciwb_mio() inline asm
The PCI Write Barrier instruction ignores the registers encoded in it.
There is thus no need to explicitly set the register to zero or to
associate it with a variable at all. In the resulting binary this removes
an unnecessary lghi and it makes the code simpler.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Linus Torvalds [Fri, 7 Jan 2022 02:35:17 +0000 (18:35 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Last pull for 5.16, the reversion has been known for a while now but
didn't get a proper fix in time. Looks like we will have several
info-leak bugs to take care of going foward.
- Revert the patch fixing the DM related crash causing a widespread
regression for kernel ULPs. A proper fix just didn't appear this
cycle due to the holidays
- Missing NULL check on alloc in uverbs
- Double free in rxe error paths
- Fix a new kernel-infoleak report when forming ah_attr's without
GRH's in ucma"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/core: Don't infoleak GRH fields
RDMA/uverbs: Check for null return of kmalloc_array
Revert "RDMA/mlx5: Fix releasing unallocated memory in dereg MR flow"
RDMA/rxe: Prevent double freeing rxe_map_set()
Linus Torvalds [Thu, 6 Jan 2022 23:00:43 +0000 (15:00 -0800)]
Merge tag 'trace-v5.16-rc8' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Three minor tracing fixes:
- Fix missing prototypes in sample module for direct functions
- Fix check of valid buffer in get_trace_buf()
- Fix annotations of percpu pointers"
* tag 'trace-v5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Tag trace_percpu_buffer as a percpu pointer
tracing: Fix check for trace_percpu_buffer validity in get_trace_buf()
ftrace/samples: Add missing prototypes direct functions
Tejun Heo [Thu, 6 Jan 2022 21:02:29 +0000 (11:02 -1000)]
selftests: cgroup: Test open-time cgroup namespace usage for migration checks
When a task is writing to an fd opened by a different task, the perm check
should use the cgroup namespace of the latter task. Add a test for it.
Tested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tejun Heo [Thu, 6 Jan 2022 21:02:29 +0000 (11:02 -1000)]
selftests: cgroup: Test open-time credential usage for migration checks
When a task is writing to an fd opened by a different task, the perm check
should use the credentials of the latter task. Add a test for it.
Tested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tejun Heo [Thu, 6 Jan 2022 21:02:29 +0000 (11:02 -1000)]
selftests: cgroup: Make cg_create() use 0755 for permission instead of 0644
0644 is an odd perm to create a cgroup which is a directory. Use the regular
0755 instead. This is necessary for euid switching test case.
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tejun Heo [Thu, 6 Jan 2022 21:02:29 +0000 (11:02 -1000)]
cgroup: Use open-time cgroup namespace for process migration perm checks
cgroup process migration permission checks are performed at write time as
whether a given operation is allowed or not is dependent on the content of
the write - the PID. This currently uses current's cgroup namespace which is
a potential security weakness as it may allow scenarios where a less
privileged process tricks a more privileged one into writing into a fd that
it created.
This patch makes cgroup remember the cgroup namespace at the time of open
and uses it for migration permission checks instad of current's. Note that
this only applies to cgroup2 as cgroup1 doesn't have namespace support.
This also fixes a use-after-free bug on cgroupns reported in
https://lore.kernel.org/r/
00000000000048c15c05d0083397@google.com
Note that backporting this fix also requires the preceding patch.
Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reported-by: syzbot+50f5cf33a284ce738b62@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/00000000000048c15c05d0083397@google.com
Fixes: 5136f6365ce3 ("cgroup: implement "nsdelegate" mount option")
Signed-off-by: Tejun Heo <tj@kernel.org>
Tejun Heo [Thu, 6 Jan 2022 21:02:29 +0000 (11:02 -1000)]
cgroup: Allocate cgroup_file_ctx for kernfs_open_file->priv
of->priv is currently used by each interface file implementation to store
private information. This patch collects the current two private data usages
into struct cgroup_file_ctx which is allocated and freed by the common path.
This allows generic private data which applies to multiple files, which will
be used to in the following patch.
Note that cgroup_procs iterator is now embedded as procs.iter in the new
cgroup_file_ctx so that it doesn't need to be allocated and freed
separately.
v2: union dropped from cgroup_file_ctx and the procs iterator is embedded in
cgroup_file_ctx as suggested by Linus.
v3: Michal pointed out that cgroup1's procs pidlist uses of->priv too.
Converted. Didn't change to embedded allocation as cgroup1 pidlists get
stored for caching.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Tejun Heo [Thu, 6 Jan 2022 21:02:28 +0000 (11:02 -1000)]
cgroup: Use open-time credentials for process migraton perm checks
cgroup process migration permission checks are performed at write time as
whether a given operation is allowed or not is dependent on the content of
the write - the PID. This currently uses current's credentials which is a
potential security weakness as it may allow scenarios where a less
privileged process tricks a more privileged one into writing into a fd that
it created.
This patch makes both cgroup2 and cgroup1 process migration interfaces to
use the credentials saved at the time of open (file->f_cred) instead of
current's.
Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Fixes: 187fe84067bd ("cgroup: require write perm on common ancestor when moving processes on the default hierarchy")
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Dave Airlie [Thu, 6 Jan 2022 20:46:07 +0000 (06:46 +1000)]
Merge tag 'amd-drm-fixes-5.16-2021-12-31' of ssh://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.16-2021-12-31:
amdgpu:
- Suspend/resume fix
- Restore runtime pm behavior with efifb
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211231143825.11479-1-alexander.deucher@amd.com
Chris Packham [Wed, 5 Jan 2022 01:53:04 +0000 (14:53 +1300)]
i2c: mpc: Avoid out of bounds memory access
When performing an I2C transfer where the last message was a write KASAN
would complain:
BUG: KASAN: slab-out-of-bounds in mpc_i2c_do_action+0x154/0x630
Read of size 2 at addr
c814e310 by task swapper/2/0
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G B 5.16.0-rc8 #1
Call Trace:
[
e5ee9d50] [
c08418e8] dump_stack_lvl+0x4c/0x6c (unreliable)
[
e5ee9d70] [
c02f8a14] print_address_description.constprop.13+0x64/0x3b0
[
e5ee9da0] [
c02f9030] kasan_report+0x1f0/0x204
[
e5ee9de0] [
c0c76ee4] mpc_i2c_do_action+0x154/0x630
[
e5ee9e30] [
c0c782c4] mpc_i2c_isr+0x164/0x240
[
e5ee9e60] [
c00f3a04] __handle_irq_event_percpu+0xf4/0x3b0
[
e5ee9ec0] [
c00f3d40] handle_irq_event_percpu+0x80/0x110
[
e5ee9f40] [
c00f3e48] handle_irq_event+0x78/0xd0
[
e5ee9f60] [
c00fcfec] handle_fasteoi_irq+0x19c/0x370
[
e5ee9fa0] [
c00f1d84] generic_handle_irq+0x54/0x80
[
e5ee9fc0] [
c0006b54] __do_irq+0x64/0x200
[
e5ee9ff0] [
c0007958] __do_IRQ+0xe8/0x1c0
[
c812dd50] [
e3eaab20] 0xe3eaab20
[
c812dd90] [
c0007a4c] do_IRQ+0x1c/0x30
[
c812dda0] [
c0000c04] ExternalInput+0x144/0x160
--- interrupt: 500 at arch_cpu_idle+0x34/0x60
NIP:
c000b684 LR:
c000b684 CTR:
c0019688
REGS:
c812ddb0 TRAP: 0500 Tainted: G B (5.16.0-rc8)
MSR:
00029002 <CE,EE,ME> CR:
22000488 XER:
20000000
GPR00:
c10ef7fc c812de90 c80ff200 c2394718 00000001 00000001 c10e3f90 00000003
GPR08:
00000000 c0019688 c2394718 fc7d625b 22000484 00000000 21e17000 c208228c
GPR16:
e3e99284 00000000 ffffffff c2390000 c001bac0 c2082288 c812df60 c001ba60
GPR24:
c23949c0 00000018 00080000 00000004 c80ff200 00000002 c2348ee4 c2394718
NIP [
c000b684] arch_cpu_idle+0x34/0x60
LR [
c000b684] arch_cpu_idle+0x34/0x60
--- interrupt: 500
[
c812de90] [
c10e3f90] rcu_eqs_enter.isra.60+0xc0/0x110 (unreliable)
[
c812deb0] [
c10ef7fc] default_idle_call+0xbc/0x230
[
c812dee0] [
c00af0e8] do_idle+0x1c8/0x200
[
c812df10] [
c00af3c0] cpu_startup_entry+0x20/0x30
[
c812df20] [
c001e010] start_secondary+0x5d0/0xba0
[
c812dff0] [
c00028a0] __secondary_start+0x90/0xdc
This happened because we would overrun the i2c->msgs array on the final
interrupt for the I2C STOP. This didn't happen if the last message was a
read because there is no interrupt in that case. Ensure that we only
access the current message if we are not processing a I2C STOP
condition.
Fixes: 1538d82f4647 ("i2c: mpc: Interrupt driven transfer")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Olof Johansson [Thu, 6 Jan 2022 00:18:44 +0000 (16:18 -0800)]
Merge tag 'socfpga_fix_for_v5.16_part_3' of git://git./linux/kernel/git/dinguyen/linux into arm/fixes
SoCFPGA dts updates for v5.16, part 3
- Change the SoCFPGA compatible to "intel,socfpga-qspi"
- Update dt-bindings document to include "intel,socfpga-qspi"
* tag 'socfpga_fix_for_v5.16_part_3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (361 commits)
ARM: dts: socfpga: change qspi to "intel,socfpga-qspi"
dt-bindings: spi: cadence-quadspi: document "intel,socfpga-qspi"
Linux 5.16-rc7
mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page()
mm/damon/dbgfs: protect targets destructions with kdamond_lock
mm/page_alloc: fix __alloc_size attribute for alloc_pages_exact_nid
mm: delete unsafe BUG from page_cache_add_speculative()
mm, hwpoison: fix condition in free hugetlb page path
MAINTAINERS: mark more list instances as moderated
kernel/crash_core: suppress unknown crashkernel parameter warning
mm: mempolicy: fix THP allocations escaping mempolicy restrictions
kfence: fix memory leak when cat kfence objects
platform/x86: intel_pmc_core: fix memleak on registration failure
net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5M
r8152: sync ocp base
r8152: fix the force speed doesn't work for RTL8156
net: bridge: fix ioctl old_deviceless bridge argument
net: stmmac: ptp: fix potentially overflowing expression
net: dsa: tag_ocelot: use traffic class to map priority on injected header
veth: ensure skb entering GRO are not cloned.
...
Link: https://lore.kernel.org/r/20211227103644.566694-1-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 6 Jan 2022 00:18:15 +0000 (16:18 -0800)]
Merge tag 'reset-fixes-for-v5.16-2' of git://git.pengutronix.de/pza/linux into arm/fixes
Reset controller fixes for v5.16, part 2
Fix pm_runtime_resume_and_get() error handling in the
reset-rzg2l-usbphy-ctrl driver.
* tag 'reset-fixes-for-v5.16-2' of git://git.pengutronix.de/pza/linux:
reset: renesas: Fix Runtime PM usage
reset: tegra-bpmp: Revert Handle errors in BPMP response
Link: https://lore.kernel.org/r/20220105172515.273947-1-p.zabel@pengutronix.de
Signed-off-by: Olof Johansson <olof@lixom.net>
Naveen N. Rao [Thu, 23 Dec 2021 10:34:39 +0000 (16:04 +0530)]
tracing: Tag trace_percpu_buffer as a percpu pointer
Tag trace_percpu_buffer as a percpu pointer to resolve warnings
reported by sparse:
/linux/kernel/trace/trace.c:3218:46: warning: incorrect type in initializer (different address spaces)
/linux/kernel/trace/trace.c:3218:46: expected void const [noderef] __percpu *__vpp_verify
/linux/kernel/trace/trace.c:3218:46: got struct trace_buffer_struct *
/linux/kernel/trace/trace.c:3234:9: warning: incorrect type in initializer (different address spaces)
/linux/kernel/trace/trace.c:3234:9: expected void const [noderef] __percpu *__vpp_verify
/linux/kernel/trace/trace.c:3234:9: got int *
Link: https://lkml.kernel.org/r/ebabd3f23101d89cb75671b68b6f819f5edc830b.1640255304.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 07d777fe8c398 ("tracing: Add percpu buffers for trace_printk()")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Naveen N. Rao [Thu, 23 Dec 2021 10:34:38 +0000 (16:04 +0530)]
tracing: Fix check for trace_percpu_buffer validity in get_trace_buf()
With the new osnoise tracer, we are seeing the below splat:
Kernel attempted to read user page (
c7d880000) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel data access on read at 0xc7d880000
Faulting instruction address: 0xc0000000002ffa10
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
...
NIP [
c0000000002ffa10] __trace_array_vprintk.part.0+0x70/0x2f0
LR [
c0000000002ff9fc] __trace_array_vprintk.part.0+0x5c/0x2f0
Call Trace:
[
c0000008bdd73b80] [
c0000000001c49cc] put_prev_task_fair+0x3c/0x60 (unreliable)
[
c0000008bdd73be0] [
c000000000301430] trace_array_printk_buf+0x70/0x90
[
c0000008bdd73c00] [
c0000000003178b0] trace_sched_switch_callback+0x250/0x290
[
c0000008bdd73c90] [
c000000000e70d60] __schedule+0x410/0x710
[
c0000008bdd73d40] [
c000000000e710c0] schedule+0x60/0x130
[
c0000008bdd73d70] [
c000000000030614] interrupt_exit_user_prepare_main+0x264/0x270
[
c0000008bdd73de0] [
c000000000030a70] syscall_exit_prepare+0x150/0x180
[
c0000008bdd73e10] [
c00000000000c174] system_call_vectored_common+0xf4/0x278
osnoise tracer on ppc64le is triggering osnoise_taint() for negative
duration in get_int_safe_duration() called from
trace_sched_switch_callback()->thread_exit().
The problem though is that the check for a valid trace_percpu_buffer is
incorrect in get_trace_buf(). The check is being done after calculating
the pointer for the current cpu, rather than on the main percpu pointer.
Fix the check to be against trace_percpu_buffer.
Link: https://lkml.kernel.org/r/a920e4272e0b0635cf20c444707cbce1b2c8973d.1640255304.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Fixes: e2ace001176dc9 ("tracing: Choose static tp_printk buffer by explicit nesting count")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Jiri Olsa [Sun, 19 Dec 2021 13:53:17 +0000 (14:53 +0100)]
ftrace/samples: Add missing prototypes direct functions
There's another compilation fail (first here [1]) reported by kernel
test robot for W=1 clang build:
>> samples/ftrace/ftrace-direct-multi-modify.c:7:6: warning: no previous
prototype for function 'my_direct_func1' [-Wmissing-prototypes]
void my_direct_func1(unsigned long ip)
Direct functions in ftrace direct sample modules need to have prototypes
defined. They are already global in order to be visible for the inline
assembly, so there's no problem.
The kernel test robot reported just error for ftrace-direct-multi-modify,
but I got same errors also for the rest of the modules touched by this patch.
[1]
67d4f6e3bf5d ftrace/samples: Add missing prototype for my_direct_func
Link: https://lkml.kernel.org/r/20211219135317.212430-1-jolsa@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e1067a07cfbc ("ftrace/samples: Add module to test multi direct modify interface")
Fixes: ae0cc3b7e7f5 ("ftrace/samples: Add a sample module that implements modify_ftrace_direct()")
Fixes: 156473a0ff4f ("ftrace: Add another example of register_ftrace_direct() use case")
Fixes: b06457c83af6 ("ftrace: Add sample module that uses register_ftrace_direct()")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Linus Torvalds [Wed, 5 Jan 2022 22:08:56 +0000 (14:08 -0800)]
Merge tag 'net-5.16-final' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski"
"Networking fixes, including fixes from bpf, and WiFi. One last pull
request, turns out some of the recent fixes did more harm than good.
Current release - regressions:
- Revert "xsk: Do not sleep in poll() when need_wakeup set", made the
problem worse
- Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in
__fixed_phy_register", broke EPROBE_DEFER handling
- Revert "net: usb: r8152: Add MAC pass-through support for more
Lenovo Docks", broke setups without a Lenovo dock
Current release - new code bugs:
- selftests: set amt.sh executable
Previous releases - regressions:
- batman-adv: mcast: don't send link-local multicast to mcast routers
Previous releases - always broken:
- ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY
- sctp: hold endpoint before calling cb in
sctp_transport_lookup_process
- mac80211: mesh: embed mesh_paths and mpp_paths into
ieee80211_if_mesh to avoid complicated handling of sub-object
allocation failures
- seg6: fix traceroute in the presence of SRv6
- tipc: fix a kernel-infoleak in __tipc_sendmsg()"
* tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
selftests: set amt.sh executable
Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks"
sfc: The RX page_ring is optional
iavf: Fix limit of total number of queues to active queues of VF
i40e: Fix incorrect netdev's real number of RX/TX queues
i40e: Fix for displaying message regarding NVM version
i40e: fix use-after-free in i40e_sync_filters_subtask()
i40e: Fix to not show opcode msg on unsuccessful VF MAC change
ieee802154: atusb: fix uninit value in atusb_set_extended_addr
mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
mac80211: initialize variable have_higher_than_11mbit
sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc
netrom: fix copying in user data in nr_setsockopt
udp6: Use Segment Routing Header for dest address if present
icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
seg6: export get_srh() for ICMP handling
Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
ipv6: Do cleanup if attribute validation fails in multipath route
ipv6: Continue processing multipath route even if gateway attribute is invalid
net/fsl: Remove leftover definition in xgmac_mdio
...
Leon Romanovsky [Tue, 4 Jan 2022 12:21:52 +0000 (14:21 +0200)]
RDMA/core: Don't infoleak GRH fields
If dst->is_global field is not set, the GRH fields are not cleared
and the following infoleak is reported.
=====================================================
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x1c9/0x270 lib/usercopy.c:33
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
_copy_to_user+0x1c9/0x270 lib/usercopy.c:33
copy_to_user include/linux/uaccess.h:209 [inline]
ucma_init_qp_attr+0x8c7/0xb10 drivers/infiniband/core/ucma.c:1242
ucma_write+0x637/0x6c0 drivers/infiniband/core/ucma.c:1732
vfs_write+0x8ce/0x2030 fs/read_write.c:588
ksys_write+0x28b/0x510 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__ia32_sys_write+0xdb/0x120 fs/read_write.c:652
do_syscall_32_irqs_on arch/x86/entry/common.c:114 [inline]
__do_fast_syscall_32+0x96/0xf0 arch/x86/entry/common.c:180
do_fast_syscall_32+0x34/0x70 arch/x86/entry/common.c:205
do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:248
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
Local variable resp created at:
ucma_init_qp_attr+0xa4/0xb10 drivers/infiniband/core/ucma.c:1214
ucma_write+0x637/0x6c0 drivers/infiniband/core/ucma.c:1732
Bytes 40-59 of 144 are uninitialized
Memory access of size 144 starts at
ffff888167523b00
Data copied to user address
0000000020000100
CPU: 1 PID: 25910 Comm: syz-executor.1 Not tainted 5.16.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
=====================================================
Fixes: 4ba66093bdc6 ("IB/core: Check for global flag when using ah_attr")
Link: https://lore.kernel.org/r/0e9dd51f93410b7b2f4f5562f52befc878b71afa.1641298868.git.leonro@nvidia.com
Reported-by: syzbot+6d532fa8f9463da290bc@syzkaller.appspotmail.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Taehee Yoo [Wed, 5 Jan 2022 14:44:36 +0000 (14:44 +0000)]
selftests: set amt.sh executable
amt.sh test script will not work because it doesn't have execution
permission. So, it adds execution permission.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: c08e8baea78e ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20220105144436.13415-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiasheng Jiang [Fri, 31 Dec 2021 09:33:15 +0000 (17:33 +0800)]
RDMA/uverbs: Check for null return of kmalloc_array
Because of the possible failure of the allocation, data might be NULL
pointer and will cause the dereference of the NULL pointer later.
Therefore, it might be better to check it and return -ENOMEM.
Fixes: 6884c6c4bd09 ("RDMA/verbs: Store the write/write_ex uapi entry points in the uverbs_api")
Link: https://lore.kernel.org/r/20211231093315.1917667-1-jiasheng@iscas.ac.cn
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Catalin Marinas [Wed, 5 Jan 2022 18:14:32 +0000 (18:14 +0000)]
Merge branches 'for-next/misc', 'for-next/cache-ops-dzp', 'for-next/stacktrace', 'for-next/xor-neon', 'for-next/kasan', 'for-next/armv8_7-fp', 'for-next/atomics', 'for-next/bti', 'for-next/sve', 'for-next/kselftest' and 'for-next/kcsan', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf: (32 commits)
arm64: perf: Don't register user access sysctl handler multiple times
drivers: perf: marvell_cn10k: fix an IS_ERR() vs NULL check
perf/smmuv3: Fix unused variable warning when CONFIG_OF=n
arm64: perf: Support new DT compatibles
arm64: perf: Simplify registration boilerplate
arm64: perf: Support Denver and Carmel PMUs
drivers/perf: hisi: Add driver for HiSilicon PCIe PMU
docs: perf: Add description for HiSilicon PCIe PMU driver
dt-bindings: perf: Add YAML schemas for Marvell CN10K LLC-TAD pmu bindings
drivers: perf: Add LLC-TAD perf counter support
perf/smmuv3: Synthesize IIDR from CoreSight ID registers
perf/smmuv3: Add devicetree support
dt-bindings: Add Arm SMMUv3 PMCG binding
perf/arm-cmn: Add debugfs topology info
perf/arm-cmn: Add CI-700 Support
dt-bindings: perf: arm-cmn: Add CI-700
perf/arm-cmn: Support new IP features
perf/arm-cmn: Demarcate CMN-600 specifics
perf/arm-cmn: Move group validation data off-stack
perf/arm-cmn: Optimise DTC counter accesses
...
* for-next/misc:
: Miscellaneous patches
arm64: Use correct method to calculate nomap region boundaries
arm64: Drop outdated links in comments
arm64: errata: Fix exec handling in erratum
1418040 workaround
arm64: Unhash early pointer print plus improve comment
asm-generic: introduce io_stop_wc() and add implementation for ARM64
arm64: remove __dma_*_area() aliases
docs/arm64: delete a space from tagged-address-abi
arm64/fp: Add comments documenting the usage of state restore functions
arm64: mm: Use asid feature macro for cheanup
arm64: mm: Rename asid2idx() to ctxid2asid()
arm64: kexec: reduce calls to page_address()
arm64: extable: remove unused ex_handler_t definition
arm64: entry: Use SDEI event constants
arm64: Simplify checking for populated DT
arm64/kvm: Fix bitrotted comment for SVE handling in handle_exit.c
* for-next/cache-ops-dzp:
: Avoid DC instructions when DCZID_EL0.DZP == 1
arm64: mte: DC {GVA,GZVA} shouldn't be used when DCZID_EL0.DZP == 1
arm64: clear_page() shouldn't use DC ZVA when DCZID_EL0.DZP == 1
* for-next/stacktrace:
: Unify the arm64 unwind code
arm64: Make some stacktrace functions private
arm64: Make dump_backtrace() use arch_stack_walk()
arm64: Make profile_pc() use arch_stack_walk()
arm64: Make return_address() use arch_stack_walk()
arm64: Make __get_wchan() use arch_stack_walk()
arm64: Make perf_callchain_kernel() use arch_stack_walk()
arm64: Mark __switch_to() as __sched
arm64: Add comment for stack_info::kr_cur
arch: Make ARCH_STACKWALK independent of STACKTRACE
* for-next/xor-neon:
: Use SHA3 instructions to speed up XOR
arm64/xor: use EOR3 instructions when available
* for-next/kasan:
: Log potential KASAN shadow aliases
arm64: mm: log potential KASAN shadow alias
arm64: mm: use die_kernel_fault() in do_mem_abort()
* for-next/armv8_7-fp:
: Add HWCAPS for ARMv8.7 FEAT_AFP amd FEAT_RPRES
arm64: cpufeature: add HWCAP for FEAT_RPRES
arm64: add ID_AA64ISAR2_EL1 sys register
arm64: cpufeature: add HWCAP for FEAT_AFP
* for-next/atomics:
: arm64 atomics clean-ups and codegen improvements
arm64: atomics: lse: define RETURN ops in terms of FETCH ops
arm64: atomics: lse: improve constraints for simple ops
arm64: atomics: lse: define ANDs in terms of ANDNOTs
arm64: atomics lse: define SUBs in terms of ADDs
arm64: atomics: format whitespace consistently
* for-next/bti:
: BTI clean-ups
arm64: Ensure that the 'bti' macro is defined where linkage.h is included
arm64: Use BTI C directly and unconditionally
arm64: Unconditionally override SYM_FUNC macros
arm64: Add macro version of the BTI instruction
arm64: ftrace: add missing BTIs
arm64: kexec: use __pa_symbol(empty_zero_page)
arm64: update PAC description for kernel
* for-next/sve:
: SVE code clean-ups and refactoring in prepararation of Scalable Matrix Extensions
arm64/sve: Minor clarification of ABI documentation
arm64/sve: Generalise vector length configuration prctl() for SME
arm64/sve: Make sysctl interface for SVE reusable by SME
* for-next/kselftest:
: arm64 kselftest additions
kselftest/arm64: Add pidbench for floating point syscall cases
kselftest/arm64: Add a test program to exercise the syscall ABI
kselftest/arm64: Allow signal tests to trigger from a function
kselftest/arm64: Parameterise ptrace vector length information
* for-next/kcsan:
: Enable KCSAN for arm64
arm64: Enable KCSAN
Aaron Ma [Wed, 5 Jan 2022 15:51:02 +0000 (23:51 +0800)]
Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks"
This reverts commit
f77b83b5bbab53d2be339184838b19ed2c62c0a5.
This change breaks multiple usb to ethernet dongles attached on Lenovo
USB hub.
Fixes: f77b83b5bbab ("net: usb: r8152: Add MAC passthrough support for more Lenovo Docks")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Link: https://lore.kernel.org/r/20220105155102.8557-1-aaron.ma@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 5 Jan 2022 17:30:10 +0000 (09:30 -0800)]
Merge tag 'gpio-fixes-for-v5.16' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Here are two last fixes for this release cycle from the GPIO
subsystem:
- fix irq offset calculation in gpio-aspeed-sgpio
- update the MAINTAINERS entry for gpio-brcmstb"
* tag 'gpio-fixes-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: update gpio-brcmstb maintainers
gpio: gpio-aspeed-sgpio: Fix wrong hwirq base in irq handler
Jakub Kicinski [Wed, 5 Jan 2022 17:00:11 +0000 (09:00 -0800)]
Merge tag 'ieee802154-for-net-2022-01-05' of git://git./linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2022-01-05
Below I have a last minute fix for the atusb driver.
Pavel fixes a KASAN uninit report for the driver. This version is the
minimal impact fix to ease backporting. A bigger rework of the driver to
avoid potential similar problems is ongoing and will come through net-next
when ready.
* tag 'ieee802154-for-net-2022-01-05' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
ieee802154: atusb: fix uninit value in atusb_set_extended_addr
====================
Link: https://lore.kernel.org/r/20220105153914.512305-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Huacai Chen [Fri, 22 Oct 2021 07:06:46 +0000 (15:06 +0800)]
arm64: Use correct method to calculate nomap region boundaries
Nomap regions are treated as "reserved". When region boundaries are not
page aligned, we usually increase the "reserved" regions rather than
decrease them. So, we should use memblock_region_reserved_base_pfn()/
memblock_region_reserved_end_pfn() instead of memblock_region_memory_
base_pfn()/memblock_region_memory_base_pfn() to calculate boundaries.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20211022070646.41923-1-chenhuacai@loongson.cn
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Maor Gottlieb [Wed, 22 Dec 2021 10:13:12 +0000 (12:13 +0200)]
Revert "RDMA/mlx5: Fix releasing unallocated memory in dereg MR flow"
This patch is not the full fix and still causes to call traces
during mlx5_ib_dereg_mr().
This reverts commit
f0ae4afe3d35e67db042c58a52909e06262b740f.
Fixes: f0ae4afe3d35 ("RDMA/mlx5: Fix releasing unallocated memory in dereg MR flow")
Link: https://lore.kernel.org/r/20211222101312.1358616-1-maorg@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Kees Cook [Wed, 15 Dec 2021 19:18:35 +0000 (11:18 -0800)]
arm64: Drop outdated links in comments
As started by commit
05a5f51ca566 ("Documentation: Replace lkml.org links
with lore"), an effort was made to replace lkml.org links with lore to
better use a single source that's more likely to stay available long-term.
However, it seems these links don't offer much value here, so just
remove them entirely.
Cc: Joe Perches <joe@perches.com>
Suggested-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/lkml/20210211100213.GA29813@willie-the-truck/
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211215191835.1420010-1-keescook@chromium.org
[catalin.marinas@arm.com: removed the arch/arm changes]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
David S. Miller [Wed, 5 Jan 2022 11:15:16 +0000 (11:15 +0000)]
Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-01-04
This series contains updates to i40e and iavf drivers.
Mateusz adjusts displaying of failed VF MAC message when the failure is
expected as well as modifying an NVM info message to not confuse the user
for i40e.
Di Zhu fixes a use-after-free issue MAC filters for i40e.
Jedrzej fixes an issue with misreporting of Rx and Tx queues during
reinitialization for i40e.
Karen correct checking of channel queue configuration to occur against
active queues for iavf.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Habets [Sun, 2 Jan 2022 08:41:22 +0000 (08:41 +0000)]
sfc: The RX page_ring is optional
The RX page_ring is an optional feature that improves
performance. When allocation fails the driver can still
function, but possibly with a lower bandwidth.
Guard against dereferencing a NULL page_ring.
Fixes: 2768935a4660 ("sfc: reuse pages to avoid DMA mapping/unmapping costs")
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Reported-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/164111288276.5798.10330502993729113868.stgit@palantir17.mph.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Karen Sornek [Wed, 1 Sep 2021 07:21:46 +0000 (09:21 +0200)]
iavf: Fix limit of total number of queues to active queues of VF
In the absence of this validation, if the user requests to
configure queues more than the enabled queues, it results in
sending the requested number of queues to the kernel stack
(due to the asynchronous nature of VF response), in which
case the stack might pick a queue to transmit that is not
enabled and result in Tx hang. Fix this bug by
limiting the total number of queues allocated for VF to
active queues of VF.
Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf")
Signed-off-by: Ashwin Vijayavel <ashwin.vijayavel@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jedrzej Jagielski [Fri, 17 Dec 2021 14:29:05 +0000 (14:29 +0000)]
i40e: Fix incorrect netdev's real number of RX/TX queues
There was a wrong queues representation in sysfs during
driver's reinitialization in case of online cpus number is
less than combined queues. It was caused by stopped
NetworkManager, which is responsible for calling vsi_open
function during driver's initialization.
In specific situation (ex. 12 cpus online) there were 16 queues
in /sys/class/net/<iface>/queues. In case of modifying queues with
value higher, than number of online cpus, then it caused write
errors and other errors.
Add updating of sysfs's queues representation during driver
initialization.
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mateusz Palczewski [Thu, 9 Dec 2021 10:04:35 +0000 (11:04 +0100)]
i40e: Fix for displaying message regarding NVM version
When loading the i40e driver, it prints a message like: 'The driver for the
device detected a newer version of the NVM image v1.x than expected v1.y.
Please install the most recent version of the network driver.' This is
misleading as the driver is working as expected.
Fix that by removing the second part of message and changing it from
dev_info to dev_dbg.
Fixes: 4fb29bddb57f ("i40e: The driver now prints the API version in error message")
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Di Zhu [Mon, 29 Nov 2021 13:52:01 +0000 (19:52 +0600)]
i40e: fix use-after-free in i40e_sync_filters_subtask()
Using ifconfig command to delete the ipv6 address will cause
the i40e network card driver to delete its internal mac_filter and
i40e_service_task kernel thread will concurrently access the mac_filter.
These two processes are not protected by lock
so causing the following use-after-free problems.
print_address_description+0x70/0x360
? vprintk_func+0x5e/0xf0
kasan_report+0x1b2/0x330
i40e_sync_vsi_filters+0x4f0/0x1850 [i40e]
i40e_sync_filters_subtask+0xe3/0x130 [i40e]
i40e_service_task+0x195/0x24c0 [i40e]
process_one_work+0x3f5/0x7d0
worker_thread+0x61/0x6c0
? process_one_work+0x7d0/0x7d0
kthread+0x1c3/0x1f0
? kthread_park+0xc0/0xc0
ret_from_fork+0x35/0x40
Allocated by task
2279810:
kasan_kmalloc+0xa0/0xd0
kmem_cache_alloc_trace+0xf3/0x1e0
i40e_add_filter+0x127/0x2b0 [i40e]
i40e_add_mac_filter+0x156/0x190 [i40e]
i40e_addr_sync+0x2d/0x40 [i40e]
__hw_addr_sync_dev+0x154/0x210
i40e_set_rx_mode+0x6d/0xf0 [i40e]
__dev_set_rx_mode+0xfb/0x1f0
__dev_mc_add+0x6c/0x90
igmp6_group_added+0x214/0x230
__ipv6_dev_mc_inc+0x338/0x4f0
addrconf_join_solict.part.7+0xa2/0xd0
addrconf_dad_work+0x500/0x980
process_one_work+0x3f5/0x7d0
worker_thread+0x61/0x6c0
kthread+0x1c3/0x1f0
ret_from_fork+0x35/0x40
Freed by task
2547073:
__kasan_slab_free+0x130/0x180
kfree+0x90/0x1b0
__i40e_del_filter+0xa3/0xf0 [i40e]
i40e_del_mac_filter+0xf3/0x130 [i40e]
i40e_addr_unsync+0x85/0xa0 [i40e]
__hw_addr_sync_dev+0x9d/0x210
i40e_set_rx_mode+0x6d/0xf0 [i40e]
__dev_set_rx_mode+0xfb/0x1f0
__dev_mc_del+0x69/0x80
igmp6_group_dropped+0x279/0x510
__ipv6_dev_mc_dec+0x174/0x220
addrconf_leave_solict.part.8+0xa2/0xd0
__ipv6_ifa_notify+0x4cd/0x570
ipv6_ifa_notify+0x58/0x80
ipv6_del_addr+0x259/0x4a0
inet6_addr_del+0x188/0x260
addrconf_del_ifaddr+0xcc/0x130
inet6_ioctl+0x152/0x190
sock_do_ioctl+0xd8/0x2b0
sock_ioctl+0x2e5/0x4c0
do_vfs_ioctl+0x14e/0xa80
ksys_ioctl+0x7c/0xa0
__x64_sys_ioctl+0x42/0x50
do_syscall_64+0x98/0x2c0
entry_SYSCALL_64_after_hwframe+0x65/0xca
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Di Zhu <zhudi2@huawei.com>
Signed-off-by: Rui Zhang <zhangrui182@huawei.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mateusz Palczewski [Wed, 3 Mar 2021 11:45:33 +0000 (11:45 +0000)]
i40e: Fix to not show opcode msg on unsuccessful VF MAC change
Hide i40e opcode information sent during response to VF in case when
untrusted VF tried to change MAC on the VF interface.
This is implemented by adding an additional parameter 'hide' to the
response sent to VF function that hides the display of error
information, but forwards the error code to VF.
Previously it was not possible to send response with some error code
to VF without displaying opcode information.
Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Pavel Skripkin [Tue, 4 Jan 2022 18:28:06 +0000 (21:28 +0300)]
ieee802154: atusb: fix uninit value in atusb_set_extended_addr
Alexander reported a use of uninitialized value in
atusb_set_extended_addr(), that is caused by reading 0 bytes via
usb_control_msg().
Fix it by validating if the number of bytes transferred is actually
correct, since usb_control_msg() may read less bytes, than was requested
by caller.
Fail log:
BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
Uninit value used in comparison:
311daa649a2003bd stack handle:
000000009a2003bd
ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396
Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
Reported-by: Alexander Potapenko <glider@google.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20220104182806.7188-1-paskripkin@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Qiuxu Zhuo [Fri, 24 Dec 2021 09:11:26 +0000 (04:11 -0500)]
EDAC/i10nm: Release mdev/mbase when failing to detect HBM
On systems without HBM (High Bandwidth Memory) mdev/mbase are not
released/unmapped.
Add the code to release mdev/mbase when failing to detect HBM.
[Tony: re-word commit message]
Cc: <stable@vger.kernel.org>
Fixes: c945088384d0 ("EDAC/i10nm: Add support for high bandwidth memory")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20211224091126.1246-1-qiuxu.zhuo@intel.com
Jakub Kicinski [Tue, 4 Jan 2022 15:18:27 +0000 (07:18 -0800)]
Merge tag 'mac80211-for-net-2022-01-04' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two more changes:
- mac80211: initialize a variable to avoid using it uninitialized
- mac80211 mesh: put some data structures into the container to
fix bugs with and not have to deal with allocation failures
* tag 'mac80211-for-net-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
mac80211: initialize variable have_higher_than_11mbit
====================
Link: https://lore.kernel.org/r/20220104144449.64937-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Will Deacon [Tue, 4 Jan 2022 14:57:14 +0000 (14:57 +0000)]
arm64: perf: Don't register user access sysctl handler multiple times
Commit
e2012600810c ("arm64: perf: Add userspace counter access disable
switch") introduced a new 'perf_user_access' sysctl file to enable and
disable direct userspace access to the PMU counters. Sadly, Geert
reports that on his big.LITTLE SoC ('Renesas Salvator-XS w/ R-Car H3'),
the file is created for each PMU type probed, resulting in a splat
during boot:
| hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
| sysctl duplicate entry: /kernel//perf_user_access
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.16.0-rc3-arm64-renesas-00003-ge2012600810c #1420
| Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
| Call trace:
| dump_backtrace+0x0/0x190
| show_stack+0x14/0x20
| dump_stack_lvl+0x88/0xb0
| dump_stack+0x14/0x2c
| __register_sysctl_table+0x384/0x818
| register_sysctl+0x20/0x28
| armv8_pmu_init.constprop.0+0x118/0x150
| armv8_a57_pmu_init+0x1c/0x28
| arm_pmu_device_probe+0x1b4/0x558
| armv8_pmu_device_probe+0x18/0x20
| platform_probe+0x64/0xd0
| hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 counters available
Introduce a state variable to track creation of the sysctl file and
ensure that it is only created once.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: e2012600810c ("arm64: perf: Add userspace counter access disable switch")
Link: https://lore.kernel.org/r/CAMuHMdVcDxR9sGzc5pcnORiotonERBgc6dsXZXMd6wTvLGA9iw@mail.gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Li Zhijian [Tue, 28 Dec 2021 01:44:06 +0000 (09:44 +0800)]
RDMA/rxe: Prevent double freeing rxe_map_set()
The same rxe_map_set could be freed twice:
rxe_reg_user_mr()
-> rxe_mr_init_user()
-> rxe_mr_free_map_set() # 1st
-> rxe_drop_ref()
...
-> rxe_mr_cleanup()
-> rxe_mr_free_map_set() # 2nd
Follow normal convection and put resource cleanup either in the error
unwind of the allocator, or the overall free function. Leave the object
unchanged with a NULL cur_map_set on failure and remove the unncessary
free in rxe_mr_init_user().
Link: https://lore.kernel.org/r/20211228014406.1033444-1-lizhijian@cn.fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pavel Skripkin [Thu, 30 Dec 2021 19:55:47 +0000 (22:55 +0300)]
mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
Syzbot hit NULL deref in rhashtable_free_and_destroy(). The problem was
in mesh_paths and mpp_paths being NULL.
mesh_pathtbl_init() could fail in case of memory allocation failure, but
nobody cared, since ieee80211_mesh_init_sdata() returns void. It led to
leaving 2 pointers as NULL. Syzbot has found null deref on exit path,
but it could happen anywhere else, because code assumes these pointers are
valid.
Since all ieee80211_*_setup_sdata functions are void and do not fail,
let's embedd mesh_paths and mpp_paths into parent struct to avoid
adding error handling on higher levels and follow the pattern of others
setup_sdata functions
Fixes: 60854fd94573 ("mac80211: mesh: convert path table to rhashtable")
Reported-and-tested-by: syzbot+860268315ba86ea6b96b@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20211230195547.23977-1-paskripkin@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tom Rix [Thu, 23 Dec 2021 16:28:48 +0000 (08:28 -0800)]
mac80211: initialize variable have_higher_than_11mbit
Clang static analysis reports this warnings
mlme.c:5332:7: warning: Branch condition evaluates to a
garbage value
have_higher_than_11mbit)
^~~~~~~~~~~~~~~~~~~~~~~
have_higher_than_11mbit is only set to true some of the time in
ieee80211_get_rates() but is checked all of the time. So
have_higher_than_11mbit needs to be initialized to false.
Fixes: 5d6a1b069b7f ("mac80211: set basic rates earlier")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211223162848.3243702-1-trix@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Dan Carpenter [Fri, 17 Dec 2021 14:59:08 +0000 (17:59 +0300)]
drivers: perf: marvell_cn10k: fix an IS_ERR() vs NULL check
The devm_ioremap() function does not return error pointers. It returns
NULL.
Fixes: 036a7584bede ("drivers: perf: Add LLC-TAD perf counter support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211217145907.GA16611@kili
Signed-off-by: Will Deacon <will@kernel.org>
Will Deacon [Tue, 4 Jan 2022 13:34:12 +0000 (13:34 +0000)]
perf/smmuv3: Fix unused variable warning when CONFIG_OF=n
The kbuild robot reports that building the SMMUv3 PMU driver with
CONFIG_OF=n results in a warning for W=1 builds:
>> drivers/perf/arm_smmuv3_pmu.c:889:34: warning: unused variable 'smmu_pmu_of_match' [-Wunused-const-variable]
static const struct of_device_id smmu_pmu_of_match[] = {
^
Guard the match table with #ifdef CONFIG_OF.
Link: https://lore.kernel.org/r/202201041700.01KZEzhb-lkp@intel.com
Fixes: 3f7be4356176 ("perf/smmuv3: Add devicetree support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
Eric Dumazet [Tue, 4 Jan 2022 09:45:08 +0000 (01:45 -0800)]
sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc
tx_queue_len can be set to ~0U, we need to be more
careful about overflows.
__fls(0) is undefined, as this report shows:
UBSAN: shift-out-of-bounds in net/sched/sch_qfq.c:1430:24
shift exponent
51770272 is too large for 32-bit type 'int'
CPU: 0 PID: 25574 Comm: syz-executor.0 Not tainted 5.16.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x201/0x2d8 lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:151 [inline]
__ubsan_handle_shift_out_of_bounds+0x494/0x530 lib/ubsan.c:330
qfq_init_qdisc+0x43f/0x450 net/sched/sch_qfq.c:1430
qdisc_create+0x895/0x1430 net/sched/sch_api.c:1253
tc_modify_qdisc+0x9d9/0x1e20 net/sched/sch_api.c:1660
rtnetlink_rcv_msg+0x934/0xe60 net/core/rtnetlink.c:5571
netlink_rcv_skb+0x200/0x470 net/netlink/af_netlink.c:2496
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x814/0x9f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0xaea/0xe60 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x5b9/0x910 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmsg+0x280/0x370 net/socket.c:2492
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Hellwig [Tue, 4 Jan 2022 09:21:26 +0000 (10:21 +0100)]
netrom: fix copying in user data in nr_setsockopt
This code used to copy in an unsigned long worth of data before
the sockptr_t conversion, so restore that.
Fixes: a7b75c5a8c41 ("net: pass a sockptr_t into ->setsockopt")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 4 Jan 2022 12:17:35 +0000 (12:17 +0000)]
Merge branch 'srv6-traceroute'
Andrew Lunn says:
====================
Fix traceroute in the presence of SRv6
When using SRv6 the destination IP address in the IPv6 header is not
always the true destination, it can be a router along the path that
SRv6 is using.
When ICMP reports an error, e.g, time exceeded, which is what
traceroute uses, it included the packet which invoked the error into
the ICMP message body. Upon receiving such an ICMP packet, the
invoking packet is examined and an attempt is made to find the socket
which sent the packet, so the error can be reported. Lookup is
performed using the source and destination address. If the
intermediary router IP address from the IP header is used, the lookup
fails. It is necessary to dig into the header and find the true
destination address in the Segment Router header, SRH.
v2:
Play games with the skb->network_header rather than clone the skb
v3:
Move helpers into seg6.c
v4:
Move short helper into header file.
Rework getting SRH destination address
v5:
Fix comment to describe function, not caller
Patch 1 exports a helper which can find the SRH in a packet
Patch 2 does the actual examination of the invoking packet
Patch 3 makes use of the results when trying to find the socket.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Mon, 3 Jan 2022 17:11:32 +0000 (18:11 +0100)]
udp6: Use Segment Routing Header for dest address if present
When finding the socket to report an error on, if the invoking packet
is using Segment Routing, the IPv6 destination address is that of an
intermediate router, not the end destination. Extract the ultimate
destination address from the segment address.
This change allows traceroute to function in the presence of Segment
Routing.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Mon, 3 Jan 2022 17:11:31 +0000 (18:11 +0100)]
icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
RFC8754 says:
ICMP error packets generated within the SR domain are sent to source
nodes within the SR domain. The invoking packet in the ICMP error
message may contain an SRH. Since the destination address of a packet
with an SRH changes as each segment is processed, it may not be the
destination used by the socket or application that generated the
invoking packet.
For the source of an invoking packet to process the ICMP error
message, the ultimate destination address of the IPv6 header may be
required. The following logic is used to determine the destination
address for use by protocol-error handlers.
* Walk all extension headers of the invoking IPv6 packet to the
routing extension header preceding the upper-layer header.
- If routing header is type 4 Segment Routing Header (SRH)
o The SID at Segment List[0] may be used as the destination
address of the invoking packet.
Mangle the skb so the network header points to the invoking packet
inside the ICMP packet. The seg6 helpers can then be used on the skb
to find any segment routing headers. If found, mark this fact in the
IPv6 control block of the skb, and store the offset into the packet of
the SRH. Then restore the skb back to its old state.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Mon, 3 Jan 2022 17:11:30 +0000 (18:11 +0100)]
seg6: export get_srh() for ICMP handling
An ICMP error message can contain in its message body part of an IPv6
packet which invoked the error. Such a packet might contain a segment
router header. Export get_srh() so the ICMP code can make use of it.
Since his changes the scope of the function from local to global, add
the seg6_ prefix to keep the namespace clean. And move it into seg6.c
so it is always available, not just when IPV6_SEG6_LWTUNNEL is
enabled.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jens Axboe [Tue, 4 Jan 2022 04:21:11 +0000 (21:21 -0700)]
Merge branch 'md-fixes' of https://git./linux/kernel/git/song/md into block-5.16
Pull MD fix from Song, fixing a raid1 regression with missing bitmap
updates.
* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid1: fix missing bitmap update w/o WriteMostly devices
Jakub Kicinski [Tue, 4 Jan 2022 03:50:16 +0000 (19:50 -0800)]
Merge tag 'batadv-net-pullrequest-
20220103' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- avoid sending link-local multicast to multicast routers,
by Linus Lüssing
* tag 'batadv-net-pullrequest-
20220103' of git://git.open-mesh.org/linux-merge:
batman-adv: mcast: don't send link-local multicast to mcast routers
====================
Link: https://lore.kernel.org/r/20220103171203.1124980-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Fainelli [Mon, 3 Jan 2022 19:34:52 +0000 (11:34 -0800)]
Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
This reverts commit
b45396afa4177f2b1ddfeff7185da733fade1dc3 ("net: phy:
fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register")
since it prevents any system that uses a fixed PHY without a GPIO
descriptor from properly working:
[ 5.971952] brcm-systemport
9300000.ethernet: failed to register fixed PHY
[ 5.978854] brcm-systemport: probe of
9300000.ethernet failed with error -22
[ 5.986047] brcm-systemport
9400000.ethernet: failed to register fixed PHY
[ 5.992947] brcm-systemport: probe of
9400000.ethernet failed with error -22
Fixes: b45396afa417 ("net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220103193453.1214961-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Song Liu [Mon, 3 Jan 2022 21:49:36 +0000 (13:49 -0800)]
md/raid1: fix missing bitmap update w/o WriteMostly devices
commit [1] causes missing bitmap updates when there isn't any WriteMostly
devices.
Detailed steps to reproduce by Norbert (which somehow didn't make to lore):
# setup md10 (raid1) with two drives (1 GByte sparse files)
dd if=/dev/zero of=disk1 bs=1024k seek=1024 count=0
dd if=/dev/zero of=disk2 bs=1024k seek=1024 count=0
losetup /dev/loop11 disk1
losetup /dev/loop12 disk2
mdadm --create /dev/md10 --level=1 --raid-devices=2 /dev/loop11 /dev/loop12
# add bitmap (aka write-intent log)
mdadm /dev/md10 --grow --bitmap=internal
echo check > /sys/block/md10/md/sync_action
root:# cat /sys/block/md10/md/mismatch_cnt
0
root:#
# remove member drive disk2 (loop12)
mdadm /dev/md10 -f loop12 ; mdadm /dev/md10 -r loop12
# modify degraded md device
dd if=/dev/urandom of=/dev/md10 bs=512 count=1
# no blocks recorded as out of sync on the remaining member disk1/loop11
root:# mdadm -X /dev/loop11 | grep Bitmap
Bitmap : 16 bits (chunks), 0 dirty (0.0%)
root:#
# re-add disk2, nothing synced because of empty bitmap
mdadm /dev/md10 --re-add /dev/loop12
# check integrity again
echo check > /sys/block/md10/md/sync_action
# disk1 and disk2 are no longer in sync, reads return differend data
root:# cat /sys/block/md10/md/mismatch_cnt
128
root:#
# clean up
mdadm -S /dev/md10
losetup -d /dev/loop11
losetup -d /dev/loop12
rm disk1 disk2
Fix this by moving the WriteMostly check to the if condition for
alloc_behind_master_bio().
[1] commit
fd3b6975e9c1 ("md/raid1: only allocate write behind bio for WriteMostly device")
Fixes: fd3b6975e9c1 ("md/raid1: only allocate write behind bio for WriteMostly device")
Cc: stable@vger.kernel.org # v5.12+
Cc: Guoqing Jiang <guoqing.jiang@linux.dev>
Cc: Jens Axboe <axboe@kernel.dk>
Reported-by: Norbert Warmuth <nwarmuth@t-online.de>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Song Liu <song@kernel.org>
David Ahern [Mon, 3 Jan 2022 17:05:55 +0000 (10:05 -0700)]
ipv6: Do cleanup if attribute validation fails in multipath route
As Nicolas noted, if gateway validation fails walking the multipath
attribute the code should jump to the cleanup to free previously
allocated memory.
Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103170555.94638-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Ahern [Mon, 3 Jan 2022 17:19:11 +0000 (10:19 -0700)]
ipv6: Continue processing multipath route even if gateway attribute is invalid
ip6_route_multipath_del loop continues processing the multipath
attribute even if delete of a nexthop path fails. For consistency,
do the same if the gateway attribute is invalid.
Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103171911.94739-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gregory Fong [Mon, 3 Jan 2022 09:53:02 +0000 (10:53 +0100)]
MAINTAINERS: update gpio-brcmstb maintainers
Add Doug and Florian as maintainers for gpio-brcmstb, and remove myself.
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Steven Lee [Tue, 14 Dec 2021 04:02:38 +0000 (12:02 +0800)]
gpio: gpio-aspeed-sgpio: Fix wrong hwirq base in irq handler
Each aspeed sgpio bank has 64 gpio pins(32 input pins and 32 output pins).
The hwirq base for each sgpio bank should be multiples of 64 rather than
multiples of 32.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Linus Torvalds [Sun, 2 Jan 2022 22:23:25 +0000 (14:23 -0800)]
Linux 5.16-rc8
projects / platform / kernel / linux-starfive.git / log