staging: brcm80211: remove struct brcmf_sdio_card from brcmfmac

Use brcmf_sdio_dev as the unified structure to store information
of wifi dongle

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove vendor and device id check from brcmfmac

mmc core is handling the vendor/device id check and matching drivers
with devices. No need to do it again in driver.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove struct brcmf_sdioh_driver from brcmfmac

brcmf_sdioh_driver is a legacy bus driver interface we dont need
any more.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: placed suspend flag in gInstance in brcmfmac

One of the steps to remove global variable. gInstance will be
replaced by brcmf_sdio_dev in the upcoming patch.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: simplified register access macro's in softmac

Code cleanup. Removed MIPS specific 'sync' instruction since this is not
required for the chips that this driver supports. MIPS specific macro's
were now the same as non-MIPS register access macro's and thus have been
deleted. Also added comment that makes clearer what the benefit of these
macro's is. Unified big and little end register access macro's.

Reported-by: Dan Carpenter <error27@gmail.com>
Reported-by: Julian Calaby <julian.calaby@gmail.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed void * from softmac phy

Code cleanup. Replacing void * by other pointer types improves code
readability and enforces stronger type checking.

Reported-by: Julian Calaby <julian.calaby@gmail.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: cleaned up softmac DMA layer

Code cleanup. Since this driver only needs to support 64 bit DMA hardware,
an unnecessary layer of abstraction could be removed. Also DMA functions that
were not called have been removed.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: revert removal of atomic initialization

The commit "staging: brcm80211: remove code for unsupported chip"
unintentionally got rid of initialization of the atomic variable
brcmf_mmc_suspend. The patch restore that particular piece of code.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove dma_addrwidth() function

The function dma_addrwidth() always returns the same value so
it is redundant. As such it has been removed.

Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove wl_alloc_dma_resources() function

The function wl_alloc_dma_resources() does not provide any value
for the brcmsmac driver as it only returns true. It has been
removed from the driver.

Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: reformat long lines in brcmsmac to 80 columns

Linux coding style strongly suggest to limit length of source lines
to 80 characters. This commit correct this for the brcmsmac sources.

Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unused rx status definitions

The file pub.h contained a number of definitions that are not
used in the brcmsmac driver and consequently have been removed.

Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: use PCI_DEVICE() macro in device table

The macro PCI_DEVICE() fills in the entry in abbreviated manner. Using
this removes the "lines over 80 characters" checkpatch warning on these
entries.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fixed checkpatch warnings for 'include' dir

All of them being 'line longer than 80 chars' type of warning.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fixed checkpatch warnings for brcmutil dir

Most of them being 'line longer than 80 chars' type of warning.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fixed checkpatch warnings for fullmac

Most of them being 'line longer than 80 chars' type of warning.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replace simple_strtoul usage in brcmfmac

The usage of simple_strtoul is not preferred. Instead kstrtoul
should be used. This patch fixes this for the brcmfmac driver.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: absorb brcmf_sdcard_detach into brcmf_sdio_remove

To increase code readability of brcmfmac

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: absorb brcmf_sdcard_attach into brcmf_sdio_probe

Increase readability of brcmfmac

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove BRCMF_SD_* debug macros from brcmfmac

Use unified debug macros BRCMF_* in fullmac.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove SDLX_MSG from brcmfmac

Use unified debug macros in fullmac

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove structure sdio_hc in brcmfmac

Most members in sdio_hc are no longer needed anymore. And fullmac
is keeping a global pointer of this structure. This patch deletes
the structure and places the useful member to a new structure
brcmf_sdio_dev. The pointer of brcmf_sdio_dev will be save in the
private driver data during sdio_probe. Therefore, we don't need to
keep the global pointer.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: get rid of sd debug message macro in fullmac

Use BRCMF_* instead of sd_* as debug message interface

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove code for unsupported chip

Currently fullmac only support bcm4329. Remove dead code for
unsupported chip.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove global wait queue head sdioh_spinwait_sleep

Remove global wait queue head sdioh_spinwait_sleep in fullmac.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: move brcmf_mmc_suspend to sdio layer in fullmac

brcmf_mmc_suspend is used for sdio suspend/resume function. Hence it
should be placed in sdio interface layer.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove private timeout functions in fullmac

Use kernel timer macros to replace current private timeout functions
used in dhd_sdio.c

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replace simple_strtoul usage in brcmsmac

The usage of simple_strtoul is not preferred. Instead kstrtoul
should be used. This patch fixes this for the brcmsmac driver.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed global variable from sdio fullmac

Code cleanup. bus->card is assigned in brcmf_sdbrcm_probe (before
brcmf_sdbrcm_probe_attach()). Since w_sdreg32() and r_sdreg32() are called
only after that assignment, they can safely use bus->card. Thus there
is no instance left where brcmf_sdcard_reg_read() or brcmf_sdcard_reg_write()
is called with a NULL parameter, so the mechanism in bcmsdh.c that deals with
a NULL pointer could be deleted.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed R_REG and OR_REG macro's from fullmac

Code cleanup. Macro invocations have been substituted with macro expansion.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove MIPS specific 'sync' instruction in fullmac

This instruction was required for the bcm4716/bcm4322, but since the
fullmac driver only supports bcm4329, it could be removed. After that,
the R_REG macro's were identical and thus were reduced to just 1 R_REG
macro.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fixed build issue for big endian platforms

Driver now builds for big endian mips platform, possibly also for other
big endian platforms. A change was made to the R_REG and W_REG macro's.
These macro's perform an xor (^) operation for endianess swap purposes.
Gcc complained because an xor operation is not allowed on a pointer type.
Fixed this by casting the pointer to an unsigned long.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: resolved checkpatch warnings in N phy

Code that exceeded the 80 char limit has been placed in separate
functions. Checkpatch warnings for the phy dir are now reduced to 1.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: resolved checkpatch warnings in LCN phy

Refactored code to not exceed the 80 char limit.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix for checkpatch warnings in phy directory

Most of them being 'line exceeds 80 chars'. Still checkpatch warnings
for the phy dir left, these will be resolved in the subsequent commits.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove volatile keyword used in struct rte_console

Two members vcons_in and vcons_out were declared using the volatile
keyword. However, there is no reason for doing so. The member is
used only to calculate the backplane address to access using offsetof.
This address is passed to subsequent read function. Use of volatile
is not warranted.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replace semaphore by wait_queue for sysioc thread

The sysioc thread was triggered using a semaphore. Now it waits for
a wake_up() on its wait queue and the semaphore has been removed as
the semaphore serves another purpose. This removes a checkpatch
warning for dhd_linux.c.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: move ioctl response wait code to dhd_sdio.c

Ioctl response wait is used only by bus layer in fullmac. Move the
corresponding code to dhd_sdio.c

Signed-off-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: move sdio related variables to dhd_sdio.c

In fullmac some variables are used by sdio layer declared in
dhd_linux.c. Move them to dhd_sdio.c for clean up.

Signed-off-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: brcmfmac: Roamed channel info passed to cfg80211

With this patch, brcmfmac driver will pass roamed channel information to
cfg80211 via cfg80211_roamed() API.

Signed-off-by: Sukesh Srikakula <sukeshs@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: brcmfmac: Fixed issues with iscan

Disabling the interface doesn't terminate undergoing
iscan in FW. When the interface is enabled immediately,
first scan request is returning the stale scan results,
which are populated during the earlier iscan. These stale
scan results are causing random failures with chromium
auto test cases.

With this patch, iscan will be terminated in FW whenever
iscan thread is terminated by the host driver.

Signed-off-by: Sukesh Srikakula <sukeshs@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix for 'remove unnecessary braces' checkpatch warning

Removed unnecessary braces in single-statement blocks. Used the tools
'uncrustify' and 'coccinelle' to accomplish this.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: use mac_pton() instead of own implementation

The function brcmu_ether_atoe() does exactly the same as mac_pton().
The driver now uses the latter and brcmu_ether_atoe() has been removed
as it is not used anymore.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: brcmfmac: Connect request made robust

Connect request made robust by passing broadcast bssid to the
FW in SET_SSID request. This fix helps STA to connect
to any available AP in ESS instead of sticking to one
unresponsive AP.

Signed-off-by: Sukesh Srikakula <sukeshs@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: brcmfmac: Enabling FW roaming by default

With this patch, FW roaming will be enabled by default in
brcmfmac driver

Signed-off-by: Sukesh Srikakula <sukeshs@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: power save issue fixed in brcmfmac driver

brcmfmac driver is getting request for enabling power save
before the interface is up. With the earlier implementation,
this request used to fail resulting out of sync power save
state between cfg80211 & brcmfmac driver. With this fix,
power save state is stored in configuration parameters and
will be used while initializing the adapter.

Signed-off-by: Sukesh Srikakula <sukeshs@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix for checkpatch 'avoid externs in c file' warning

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: use native error code in brcmf_c_pattern_atoh()

The function brcmf_c_pattern_atoh() returned meaningless -1 value.
These have been replaced by linux error code -EINVAL.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove volatile keyword from driver sources

As checkpatch.pl rightfully indicated the volatile keyword was used
but not necessary. It has been removed from the code.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove duplicated code from brcmf_init_iscan

Part of the code in brcmf_init_scan was identical to the code in
brcmf_invoke_iscan and has been replaced by a call to it.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: use mutex instead of semaphore in dhd_linux.c

The semaphore proto_sem has been replaced with mutex proto_block
which lock certain code paths for one thread.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: modify the FOREACH_BSS macro

The FOREACH_BSS macro was changed to remove a checkpatch error. However,
the patch was considered ugly. This patch is another attempt to make it
more clear. END_FOREACH_BSS is defined with braces to avoid an invalid
checkpatch.pl warning. Ideally, the checkpatch.pl script should be adapted
but lacking good perl knowledge to do so.

Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replaced all volatile typedefs

Volatile keyword is not needed, hardware is accessed using native Linux
calls that provide synchronization.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replaced typedef wl_rateset_t by struct brcm_rateset

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replaced typedef wlc_rateset_t

By struct brcms_c_rateset. Struct brcms_c_rateset was renamed from
brcms_rateset, because there will be two rateset related structures that
should differ significantly in naming from each other. Struct wl_rateset
will be renamed to struct brcm_rateset in the next patch.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replaced various typedefs

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed function declaration typedefs from brcmutil

Softmac related code cleanup. Typedefs are undesirable according to the
CodingStyle document.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed function declaration typedefs from main.h,pub.h

Softmac related code cleanup. Typedefs are undesirable according to the
CodingStyle document.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed function declaration typedefs from otp.c

Softmac related code cleanup. Typedefs are undesirable according to the
CodingStyle document.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed function declaration typedefs from dma.h part 4

Softmac related code cleanup. Typedefs are undesirable according to the
CodingStyle document.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed function declaration typedefs from dma.h part 3

Softmac related code cleanup. Typedefs are undesirable according to the
CodingStyle document.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed function declaration typedefs from dma.h part 2

Softmac related code cleanup. Typedefs are undesirable according to the
CodingStyle document.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed function declaration typedefs from dma.h part 1

Softmac related code cleanup. Typedefs are undesirable according to the
CodingStyle document.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed function declaration typedefs from aiutils.h

Softmac related code cleanup. Typedefs are undesirable according to the
CodingStyle document.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed function declaration typedefs from phy_int.h

Softmac related code cleanup. Typedefs are undesirable according to the
CodingStyle document.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: shuffled sections in main.c

Moved bmac functions above 'common' functions invoking them. This facilitates
merging these functions in a later commit. Also declared locally used
functions static.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: merged bmac.c into main.c

Future goal is to merge the bmac layer in the driver with the 'common' layer.
A step towards this goal is to have one file containing both bmac and common
code. Header files (bmac.h, main.h) were also merged.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: bugfix for len==0 parameter in 3 fullmac functions

Three functions use the same method to check incoming parameters. The
'len' parameter can be equal to 0 in case of a 'set' operation.
Currently these functions return an error code under that condition,
which is incorrect. The problem was introduced in recent patches in
which asserts were removed from the fullmac.

Despite this being a bug, my regression testing has not shown any problems.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix compile error on non-x86 archs since 3.0 kernel

Since the arrival of kernel version 3.0 in the staging tree it
turns out compile error occurs for sparc64, powerpc, and arm
platforms. This patch fixes that issue.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: mei: enable msi when supported

enable msi when supported
also in that case we can drop the quick handler
from the threaded interrupt that protected us from
handling USB interrupts

Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: r8712u: Merging Realtek's latest (v2.6.6). Added Larry's copyright.

Larry Finger's copyright addendum has now been included in the
banners.
The files involved in this commit have had only their banners
changed; there have been no other mods.

Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: r8712u: Merging Realtek's latest (v2.6.6). Added copyright banners.

The only changes to these files have been the addition of only copyright
banners.

Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: r8712u: Interface-state not fully tracked.

padapter->bup is True when the interface has been
brought Up. But it was not being reset when the
interface is taken Down.
This has not caused a known problem, as other
state variables may be compensating for it. Never
the less, it is now properly tracked.

Signed-off-by: Ali Bahar <ali@internetDog.org>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: r8712u: Sets to SSID, and to AP MAC#, can now be done when the interface is Down.

The original Realtek code assumed that ioctl Sets get done after the
interface is Up. This included the set to Essid and to the AP MAC#;
and it fit Realtek's installation procedure. But there is no such
necessity for the adapter, and no stated requirement found
elsewhere. Also, wireless drivers typically permit this.

A typical error message used to be:
Error for wireless request "Set ESSID" (8B1A) :
    SET failed on device wlan0 ; Operation not permitted.

Signed-off-by: Ali Bahar <ali@internetDog.org>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: add driver for Realtek RTS5139 cardreader

This driver is used for Realtek RTS5139 USB cardreader, which
supports many cards, such as SD, MS, XD series cards.

Signed-off-by: edwin_rong <edwin_rong@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi: new driver usbduxsigma

This adds a new driver file usbduxsigma which is the driver for
a new board by ITL. The driver has been tested and is working fine.

Signed-off-by: Bernd Porr <berndporr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: fix comedi build errors

Fix build errors when CONFIG_COMEDI_PCI_DRIVERS is not enabled
and CONFIG_COMEDI_PCI_DRIVERS was used where CONFIG_ISA_DMA_API
should have been used.

drivers/staging/comedi/drivers/ni_labpc.c: In function 'labpc_ai_cmd':
drivers/staging/comedi/drivers/ni_labpc.c:1351: error: implicit declaration of function 'labpc_suggest_transfer_size'
drivers/staging/comedi/drivers/ni_labpc.c: At top level:
drivers/staging/comedi/drivers/ni_labpc.c:1802: error: conflicting types for 'labpc_suggest_transfer_size'
drivers/staging/comedi/drivers/ni_labpc.c:1351: note: previous implicit declaration of 'labpc_suggest_transfer_size' was here

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: fix initialization of static to 0 in ni_pcidio.c

This patch removes initialization of static to 0 or NULL error found
by checkpatch.pl tool

Signed-off-by: Bojan Prtvar <prtvar.b@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: do not initialise statics to 0 or NULL

This is a patch to adv_pci_dio.c that fixes an error initializing

static struct pci_dio_private *pci_priv to NULL

removed the initialization.
found by the checkpatch.pl tool.

Signed-off-by: Mariano Guerra <luismarianoguerra@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Fixed coding style issues.

comedi_fops.c : A forward decleration was declared as extern although it
                is a function private to this file. Changed the
                decleration to static.

Signed-off-by: Mark Pearson <markpearson_de@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Rename et131x_config_global_regs > et131x_configure_global_regs

Typo in header file. Also renaming a few adapter references to fit in with the rest of the file.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Remove redundant commented out code

Removed commented out calls that no longer exist in the net_device struct.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Fix variable typo carry_reg1 -> carry_reg2

This mistake was introduced in the patch 'staging: et131x: Convert et1310_address_map.h names from camel case'

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Convert et1310_tx.c function name from CamelCase

Tested on an ET-131x device.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: add et1310_ prefix to et1310_mac.c functions

Making finger pointing that bit easier.
Tested on an ET-131x device.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Converting et1310_rx.h variable names from CamelCase

Tested on an ET-131x device.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Make static some local functions in et1310_rx.c

Tested on an ET-131x device.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Converting et1310_rx.c function and local names from CamelCase

Also renamed some items to improve readability, and other minor tidy-ups.
Tested on an ET-131x device.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Converting et1310_pm.c function and local names from CamelCase

Tested on an ET-131x device.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Converting et1310_phy.c function and local names from CamelCase

Tested on an ET-131x device.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Converting et1310_mac.c function and local names from CamelCase

Tested on an ET-131x device.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Linux 3.1-rc3

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Add group event scheduling option to perf record/stat
  MAINTAINERS: Fix list of perf events source files
  perf tools: Fix build against newer glibc
  perf tools: Fix error handling of unknown events
  perf evlist: Fix missing event name init for default event
  perf list: Fix exit value

Merge branch 'stable/bug.fixes' of git://git./linux/kernel/git/konrad/xen

* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/tracing: Fix tracing config option properly
  xen: Do not enable PV IPIs when vector callback not present
  xen/x86: replace order-based range checking of M2P table by linear one
  xen: xen-selfballoon.c needs more header files

xen/tracing: Fix tracing config option properly

Steven Rostedt says we should use CONFIG_EVENT_TRACING.

Cc:Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

xen: Do not enable PV IPIs when vector callback not present

Fix regression for HVM case on older (<4.1.1) hypervisors caused by

  commit 99bbb3a84a99cd04ab16b998b20f01a72cfa9f4f
  Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
  Date:   Thu Dec 2 17:55:10 2010 +0000

    xen: PV on HVM: support PV spinlocks and IPIs

This change replaced the SMP operations with event based handlers without
taking into account that this only works when the hypervisor supports
callback vectors. This causes unexplainable hangs early on boot for
HVM guests with more than one CPU.

BugLink: http://bugs.launchpad.net/bugs/791850
CC: stable@kernel.org
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-and-Reported-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Merge branch 'fixes' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: core: handle ack_busy when fetching the Config ROM

Btrfs: fix 64 bit divide problem

This fixes a regression introduced by commit cdcb725c05fe ("Btrfs: check
if there is enough space for balancing smarter").  We can't do 64-bit
divides on 32-bit architectures.

In cases where we need to divide/multiply by 2 we should just left/right
shift respectively, and in cases where theres N number of devices use
do_div.  Also make the counters u64 to match up with rw_devices.
Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Acked-and-tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: flush any pending end_io requests before DIO reads w/dioread_nolock
  ext4: fix nomblk_io_submit option so it correctly converts uninit blocks
  ext4: Resolve the hang of direct i/o read in handling EXT4_IO_END_UNWRITTEN.
  ext4: call ext4_ioend_wait and ext4_flush_completed_IO in ext4_evict_inode
  ext4: Fix ext4_should_writeback_data() for no-journal mode

Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: sound/aoa/fabrics/layout.c: remove unneeded kfree
  ALSA: hda - Fix error check from snd_hda_get_conn_index() in patch_cirrus.c
  ALSA: hda - Don't spew too many ELD errors
  ALSA: usb-audio - Fix missing mixer dB information
  ALSA: hda - Add "PCM" volume to vmaster slave list
  ALSA: hda - Fix duplicated capture-volume creation for ALC268 models
  ALSA: ac97: Add HP Compaq dc5100 SFF(PT003AW) to Headphone Jack Sense whitelist
  ALSA: snd_usb_caiaq: track submitted output urbs