Wilson Ding [Tue, 16 Feb 2016 18:14:53 +0000 (19:14 +0100)]
serial: mvebu-uart: initial support for Armada-3700 serial port
Armada-3700's uart is a simple serial port, which doesn't
support. Configuring the modem control lines. The uart port has a 32
bytes Tx FIFO and a 64 bytes Rx FIFO
The uart driver implements the uart core operations. It also support the
system (early) console based on Armada-3700's serial port.
Known Issue:
The uart driver currently doesn't support clock programming, which means
the baud-rate stays with the default value configured by the bootloader
at boot time
[gregory.clement@free-electrons.com: Rewrite many part which are too long
to enumerate]
Signed-off-by: Wilson Ding <dingwei@marvell.com>
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Romain Izard [Tue, 23 Feb 2016 14:54:54 +0000 (15:54 +0100)]
serial: mctrl_gpio: Add missing module license
As the mctrl_gpio driver can be built as a module, it needs to have its
license specified with MODULE_LICENSE. Otherwise, it cannot access
required symbols exported through EXPORT_SYMBOL_GPL.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 25 Feb 2016 20:47:57 +0000 (21:47 +0100)]
serial: ifx6x60: avoid uninitialized variable use
gcc warns about a potential use of an uninitialized variable in this driver:
drivers/tty/serial/ifx6x60.c: In function 'ifx_spi_complete':
drivers/tty/serial/ifx6x60.c:713:6: warning: 'more' may be used uninitialized in this function [-Wmaybe-uninitialized]
if (more || ifx_dev->spi_more || queue_length > 0 ||
Unlike a lot of other such warnings, this one is correct and describes
an actual problem in the handling of the "IFX_SPI_HEADER_F" result code.
This appears to be a result from a restructuring of the driver that
dates back to before it was merged in the kernel, so it's impossible
to know where it went wrong. I also don't know what that result code
means, so I have no idea if setting 'more' to zero is the correct
solution, but at least it makes the behavior reproducible rather than
depending on whatever happens to be on the kernel stack.
This patch initializes the 'more' variable to zero in each of the
three code paths that could result in undefined behavior before,
which is more explicit than initializing it at the start of the
function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ludovic Desroches [Mon, 22 Feb 2016 14:18:55 +0000 (15:18 +0100)]
tty/serial: at91: fix bad offset for UART timeout register
With SAMA5D2, the UART has hw timeout but the offset of the register to
define this value is not the same as the one for USART.
When using the new UART, the value of this register was 0 so we never
get timeout irqs. It involves that when using DMA, we were stuck until
the execution of the dma callback which happens when a buffer is full
(so after receiving 2048 bytes).
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Romain Izard [Fri, 26 Feb 2016 10:15:04 +0000 (11:15 +0100)]
tty/serial: at91: restore dynamic driver binding
In commit
c39dfebc7798956fd2140ae6321786ff35da30c3, the modular support
code for atmel_serial was removed, as the driver cannot be built as a
module. Because no use case was proposed, the dynamic driver binding
support was removed as well.
The atmel_serial driver can manage up to 7 serial controllers, which are
multiplexed with other functions. For example, in the Atmel SAMA5D2, the
Flexcom controllers can work as USART, SPI or I2C controllers, and on
all Atmel devices serial lines can be reconfigured as GPIOs.
My use case uses GPIOs to transfer a firmware update using a custom
protocol on the lines used as a serial port during the normal life of
the device. If it is not possible to unbind the atmel_serial driver, the
GPIO lines remain reserved and prevent this case from working.
This patch reinstates the atmel_serial_remove function, and fixes it as
it failed to clear the "clk" field on removal, triggering an oops when
a device was bound again after being unbound.
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jean Delvare [Mon, 22 Feb 2016 08:00:39 +0000 (09:00 +0100)]
serial: 8250: Add hardware dependency to RT288X option
Kconfig option SERIAL_8250_RT288X seems to be only relevant on MIPS
platforms, so do not present it on other architectures, unless
build-testing.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Mans Rullgard <mans@mansr.com>
Cc: Jiri Slaby <jslaby@suse.com>
Acked-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Konstantin Khlebnikov [Sun, 21 Feb 2016 07:06:14 +0000 (10:06 +0300)]
TTY, devpts: document pty count limiting
Logic has been changed in kernel 3.4 by commit
e9aba5158a80
("tty: rework pty count limiting") but still not documented.
Sysctl kernel.pty.max works as global limit, kernel.pty.reserve ptys
are reserved for initial devpts instance (mounted without "newinstance").
Per-instance limit also could be set by mount option "max=%d".
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Hackmann [Fri, 26 Feb 2016 19:01:05 +0000 (19:01 +0000)]
tty: goldfish: support platform_device with id -1
When the platform bus sets the platform_device id to -1 (PLATFORM_DEVID_NONE),
use an incrementing counter for the TTY index instead
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miodrag Dinic [Fri, 26 Feb 2016 19:00:44 +0000 (19:00 +0000)]
drivers: tty: goldfish: Add device tree bindings
Enable support for registering this device using the device tree.
Device tree node example for registering Goldfish TTY device :
goldfish_tty@
1f004000 {
interrupts = <0xc>;
reg = <0x1f004000 0x1000>;
compatible = "google,goldfish-tty";
};
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maarten Brock [Tue, 16 Feb 2016 17:59:04 +0000 (18:59 +0100)]
serial-uartlite: Configure for rising edge irq trigger.
This device generates a short rising pulse on the interrupt request line.
Signed-off-by: Maarten Brock <m.brock@vanmierlo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maarten Brock [Tue, 16 Feb 2016 17:59:03 +0000 (18:59 +0100)]
serial-uartlite: Spinlock inside the loop.
Better to hold the spinlock as short as possible.
Signed-off-by: Maarten Brock <m.brock@vanmierlo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maarten Brock [Tue, 16 Feb 2016 17:59:02 +0000 (18:59 +0100)]
serial-uartlite: Constify uartlite_be/uartlite_le
Made uartlite_be and uartlite_le constants.
Signed-off-by: Maarten Brock <m.brock@vanmierlo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maarten Brock [Tue, 16 Feb 2016 17:59:01 +0000 (18:59 +0100)]
serial-uartlite: Enlarge maximum nr of devices to 16.
This device is ideal to use when you need a lot of uarts in your FPGA.
Try not to force all those users to patch their kernel.
Signed-off-by: Maarten Brock <m.brock@vanmierlo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Mon, 15 Feb 2016 16:02:13 +0000 (18:02 +0200)]
serial: 8250_pci: all known Braswell ports are 1 channel
There is no need to have channel offset defined since all BayTrail and Braswell
ports are 1 channel. Remove unneeded definition.
While here, remove comment which has no value.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Mon, 15 Feb 2016 16:01:51 +0000 (18:01 +0200)]
serial: 8250_pci: convert to pcim_*() API
The managed API provides a better approach to help with acquiring and releasing
resources. Besides that error handling becomes simpler.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Mon, 15 Feb 2016 15:46:55 +0000 (17:46 +0200)]
serial: 8250_dw: remove leftover definitions
The clocks are managed through clk-fractional-divider.c module, and thus CLK
framework takes care about it. Remove letfovers from this driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Mon, 15 Feb 2016 15:38:45 +0000 (17:38 +0200)]
serial: 8250_dw: remove redundant 'else' keyword
When the main branch contains return statement the 'else' keyword is not
needed. Remove it here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Simek [Thu, 18 Feb 2016 07:57:20 +0000 (08:57 +0100)]
serial: xuartps: Enable OF earlycon support
Support early console setup via DT for all listed compatible strings.
Remove EARLYCON_DECLARE which was done by:
"Use common framework for earlycon declarations"
(sha1:
2eaa790989e03900298ad24f77f1086dbbc1aebd)
when OF_EARLYCON_DECLARE is defined.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Horman [Wed, 2 Mar 2016 01:35:27 +0000 (10:35 +0900)]
tty: sh-sci: Use ARCH_RENESAS
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.
This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Mon, 15 Feb 2016 12:36:32 +0000 (13:36 +0100)]
serial: sh-sci: Remove redundant instances of EARLYCON_DECLARE()
As of commit
2eaa790989e03900 ("earlycon: Use common framework for
earlycon declarations") it is no longer needer to specify both
EARLYCON_DECLARE() and OF_EARLYCON_DECLARE().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin Murphy [Thu, 3 Mar 2016 16:35:35 +0000 (16:35 +0000)]
tty: amba-pl011: don't dereference NULL platform data
When only a TX DMA channel is specified in DT, pl011_dma_probe() falls
back to looking for the optional RX channel in platform data. What it
doesn't do is check whether that platform data actually exists...
Add the missing check to avoid crashing the kernel.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matwey V. Kornilov [Fri, 19 Feb 2016 05:29:10 +0000 (08:29 +0300)]
tty: serial: Use GFP_ATOMIC instead of GFP_KERNEL in serial8250_em485_init()
serial8250_em485_init() is supposed to be protected with
p->port.lock spinlock.
This may lead to issues when kmalloc sleeps, so it is better to use
GFP_ATOMIC in this spinlocked context.
Fixes:
e490c9144cfa ("tty: Add software emulated RS485 support for 8250")
Reported-by: Ильяс Гасанов <torso.nafi@gmail.com>
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matwey V. Kornilov [Mon, 15 Feb 2016 18:42:12 +0000 (21:42 +0300)]
tty: serial: 8250: Cleanup p->em485 in serial8250_unregister_port
Formally, currently there is no memory leak, but if
serial8250_ports[line] is reused with other 8250 driver, then em485
will be already activated and it will cause issues.
Fixes:
e490c9144cfa ("tty: Add software emulated RS485 support for 8250")
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Wed, 24 Feb 2016 11:15:09 +0000 (16:45 +0530)]
tty: audit: remove unused variable
While building with W=1 we were getting build warning:
drivers/tty/tty_audit.c:149:16: warning: variable 'sessionid' set but not used
The local variable sessionid was only assigned the value of
current->sessionid but was never reused. On further inspection it turned
out that there is no need of audit_get_loginuid() also.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 8 Mar 2016 00:10:08 +0000 (16:10 -0800)]
Revert "sc16is7xx: implemented get_mctrl"
This reverts commit
a3f0b77f36ca5c5871fb8daf7e66fa409abe1ed5.
Maarten writes:
It appears to be wrong and I don't have a good idea how to fix
it yet.
Cc: Maarten Brock <m.brock@vanmierlo.com>
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
Maarten Brock [Sun, 14 Feb 2016 14:05:26 +0000 (15:05 +0100)]
sc16is7xx: implemented get_mctrl
Add support for manual getting the modem control lines.
Signed-off-by: Maarten Brock <m.brock@vanmierlo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maarten Brock [Sun, 14 Feb 2016 14:05:25 +0000 (15:05 +0100)]
sc16is7xx: implemented set_mctrl
Add support for manual setting the modem control lines.
Signed-off-by: Maarten Brock <m.brock@vanmierlo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Tue, 9 Feb 2016 15:08:59 +0000 (07:08 -0800)]
tty/serial: digicolor: Fix bad usage of IS_ERR_VALUE
IS_ERR_VALUE() assumes that its parameter is an unsigned long.
It can not be used to check if an unsigned int reflects an error.
Doing so can result in the following build warning.
drivers/tty/serial/digicolor-usart.c: In function ‘digicolor_uart_probe’:
include/linux/err.h:21:38: warning:
comparison is always false due to limited range of data type
drivers/tty/serial/digicolor-usart.c:485:6: note:
in expansion of macro ‘IS_ERR_VALUE’
If that warning is seen, an error return from platform_get_irq() is missed.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Tue, 9 Feb 2016 15:06:47 +0000 (07:06 -0800)]
serial: clps711x: Fix bad usage of IS_ERR_VALUE
IS_ERR_VALUE() assumes that its parameter is an unsigned long.
It can not be used to check if an unsigned int reflects an error.
Doing so can result in the following build warning.
drivers/tty/serial/clps711x.c: In function ‘uart_clps711x_probe’:
include/linux/err.h:21:38: warning:
comparison is always false due to limited range of data type
drivers/tty/serial/clps711x.c:471:6: note: in expansion of macro ‘IS_ERR_VALUE’
If that warning is seen, an error return from platform_get_irq() is missed.
Use a temporary variable to check for errors from platform_get_irq().
Also don't use IS_ERR_VALUE() to check if an integer variable is < 0.
The variable can be checked directly in that case.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Sperl [Tue, 9 Feb 2016 11:47:16 +0000 (11:47 +0000)]
serial: bcm2835: fix unsigned int issue with irq
Fixes error condition check when requesting the irq,
that would not trigger because of uart_port.irq being
defined as unsigned int.
Reported by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jon Hunter [Mon, 8 Feb 2016 16:27:35 +0000 (16:27 +0000)]
serial: 8250_early: Add earlycon support for Tegra
Declare an OF early console for Tegra so that the early console device
can be specified via the "stdout-path" property in device-tree.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 8 Feb 2016 13:36:13 +0000 (14:36 +0100)]
8250: mediatek: mark PM functions as __maybe_unused
The mtk8250_runtime_suspend function is not used when runtime PM is
disabled, so we get a warning about an unused function:
drivers/tty/serial/8250/8250_mtk.c:119:12: error: 'mtk8250_runtime_suspend' defined but not used [-Werror=unused-function]
static int mtk8250_runtime_suspend(struct device *dev)
This marks all the PM functions as __maybe_unused to avoid the warning,
and removes the #ifdef around the PM_SLEEP functions for consistency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Färber [Mon, 8 Feb 2016 12:49:42 +0000 (13:49 +0100)]
tty: serial: meson: Add support for XTAL clock input
Fix the baudrate calculation for 24 MHz XTAL clock found on gxbb platforms.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gabriel Krisman Bertazi [Mon, 8 Feb 2016 12:20:59 +0000 (10:20 -0200)]
serial: jsm: change maintainer to myself
Since Thadeu left IBM, jsm has gone mostly unmaintained, since his email
address doesn't work anymore. I'm stepping up to help maintain this
driver upstream.
I'm adding Thadeu's personal e-mail address in Cc, hoping that we can
get his ack.
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Thadeu Cascardo <cascardo@cascardo.eti.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 14 Feb 2016 22:36:04 +0000 (14:36 -0800)]
Merge 4.5-rc4 into tty-next
We want the fixes in here, and this resolves a merge error in tty_io.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 14 Feb 2016 21:05:20 +0000 (13:05 -0800)]
Linux 4.5-rc4
Linus Torvalds [Sun, 14 Feb 2016 20:47:45 +0000 (12:47 -0800)]
Merge tag 'char-misc-4.5-rc4' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are 3 fixes for some reported issues. Two nvmem driver fixes,
and one mei fix. All have been in linux-next just fine"
* tag 'char-misc-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nvmem: qfprom: Specify LE device endianness
nvmem: core: return error for non word aligned access
mei: validate request value in client notify request ioctl
Linus Torvalds [Sun, 14 Feb 2016 20:34:53 +0000 (12:34 -0800)]
Merge tag 'driver-core-4.5-rc4' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is one driver core, well klist, fix for 4.5-rc4.
It fixes a problem found in the scsi device list traversal that
probably also could be triggered by other subsystems.
The fix has been in linux-next for a while with no reported problems"
* tag 'driver-core-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
klist: fix starting point removed bug in klist iterators
Linus Torvalds [Sun, 14 Feb 2016 20:29:59 +0000 (12:29 -0800)]
Merge tag 'tty-4.5-rc4' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are a number of small tty and serial driver fixes for 4.5-rc4
that resolve some reported issues.
One of them got reverted as it wasn't correct based on testing, and
all have been in linux-next for a while"
* tag 'tty-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "8250: uniphier: allow modular build with 8250 console"
pty: make sure super_block is still valid in final /dev/tty close
pty: fix possible use after free of tty->driver_data
tty: Add support for PCIe WCH382 2S multi-IO card
serial/omap: mark wait_for_xmitr as __maybe_unused
serial: omap: Prevent DoS using unprivileged ioctl(TIOCSRS485)
8250: uniphier: allow modular build with 8250 console
tty: Drop krefs for interrupted tty lock
Linus Torvalds [Sun, 14 Feb 2016 20:24:28 +0000 (12:24 -0800)]
Merge tag 'usb-4.5-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull PHY fixes from Greg KH:
"Here are a couple of PHY driver fixes for 4.5-rc4.
A few small phy issues. All have been in linux-next with no reported
issues"
* tag 'usb-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload
phy: twl4030-usb: Relase usb phy on unload
phy: core: fix wrong err handle for phy_power_on
phy: Restrict phy-hi6220-usb to HiSilicon arm64
Linus Torvalds [Sun, 14 Feb 2016 20:07:55 +0000 (12:07 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf tooling fixes from Thomas Gleixner:
"Another round of fixes for the perf tooling side:
- Prevent a NULL pointer dereference in tracepoint error handling
- Fix a thread handling bug in the intel_pt error handling code
- Search both .eh_frame and .debug_frame sections as toolchains seem
to have random choices of storing the CFI information
- Fix the perf state interval output values, which got broken when
fixing the overall output"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf stat: Fix interval output values
perf probe: Search both .eh_frame and .debug_frame sections for probe location
perf tools: Fix thread lifetime related segfaut in intel_pt
perf tools: tracepoint_error() can receive e=NULL, robustify it
Linus Torvalds [Sun, 14 Feb 2016 20:02:05 +0000 (12:02 -0800)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull lockdep fix from Thomas Gleixner:
"A single fix for the stack trace caching logic in lockdep, where the
duplicate avoidance managed to store no back trace at all"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Fix stack trace caching logic
Linus Torvalds [Sun, 14 Feb 2016 19:57:24 +0000 (11:57 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix preventing a 32bit overflow in timespec/val to cputime
conversions on 32bit machines"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cputime: Prevent 32bit overflow in time[val|spec]_to_cputime()
Linus Torvalds [Sun, 14 Feb 2016 19:49:30 +0000 (11:49 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irqchip fixes from Thomas Gleixner:
"Another set of ARM SoC related irqchip fixes:
- Plug a memory leak in gicv3-its
- Limit features to the root gic interrupt controller
- Add a missing barrier in the gic-v3 IAR access
- Another compile test fix for sun4i"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor
irqchip/gic: Only set the EOImodeNS bit for the root controller
irqchip/gic: Only populate set_affinity for the root controller
irqchip/gicv3-its: Fix memory leak in its_free_tables()
irqchip/sun4i: Fix compilation outside of arch/arm
Linus Torvalds [Sun, 14 Feb 2016 18:50:26 +0000 (10:50 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two small fixlets for x86:
- Prevent a KASAN false positive in thread_saved_pc()
- Fix a 32-bit truncation problem in the x86 numa code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/numa: Fix 32-bit memblock range truncation bug on 32-bit NUMA kernels
x86: Fix KASAN false positives in thread_saved_pc()
Linus Torvalds [Sun, 14 Feb 2016 18:49:01 +0000 (10:49 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Here's the first round of MIPS fixes after the merge window:
- Detect Octeon III's PCI correctly.
- Fix return value of the MT7620 probing function.
- Wire up the copy_file_range syscall.
- Fix 64k page support on 32 bit kernels.
- Fix the early Coherency Manager probe.
- Allow only hardware-supported page sizes to be selected for R6000.
- Fix corner cases for the RDHWR nstruction emulation on old hardware.
- Fix FPU handling corner cases.
- Remove stale entry for BCM33xx from the MAINTAINERS file.
- 32 and 64 bit ELF headers are different, handle them correctly"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
mips: Differentiate between 32 and 64 bit ELF header
MIPS: Octeon: Update OCTEON_FEATURE_PCIE for Octeon III
MIPS: pci-mt7620: Fix return value check in mt7620_pci_probe()
MIPS: Fix early CM probing
MIPS: Wire up copy_file_range syscall.
MIPS: Fix 64k page support for 32 bit kernels.
MIPS: R6000: Don't allow 64k pages for R6000.
MIPS: traps.c: Correct microMIPS RDHWR emulation
MIPS: traps.c: Don't emulate RDHWR in the CpU #0 exception handler
MAINTAINERS: Remove stale entry for BCM33xx chips
MIPS: Fix FPU disable with preemption
MIPS: Properly disable FPU in start_thread()
MIPS: Fix buffer overflow in syscall_get_arguments()
Linus Torvalds [Sun, 14 Feb 2016 18:46:47 +0000 (10:46 -0800)]
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"A couple of ARM fixes from Linus for the ICST clock generator code"
[ "Linus" here is Linus Walleij. Name-stealer.
Linus "there can be only one" Torvalds ]
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8519/1: ICST: try other dividends than 1
ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()
Linus Torvalds [Sun, 14 Feb 2016 18:40:21 +0000 (10:40 -0800)]
Merge branch 'component' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull component helper fixes from Russell King:
"A few fixes for problems people have encountered with the recent
update to the component helpers"
* 'component' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
component: remove device from master match list on failed add
component: Detach components when deleting master struct
component: fix crash on x86_64 with hda audio drivers
Linus Torvalds [Sun, 14 Feb 2016 01:35:23 +0000 (17:35 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma
Pull more rdma fixes from Doug Ledford:
"I think we are getting pretty close to done now. There are four
one-off fixes in this update:
- fix ipoib multicast joins
- fix mlx4 error handling
- fix mlx5 size computation
- fix a thinko in core code"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/mlx5: Fix RC transport send queue overhead computation
IB/ipoib: fix for rare multicast join race condition
IB/core: Fix reading capability mask of the port info class
net/mlx4: fix some error handling in mlx4_multi_func_init()
Linus Torvalds [Sun, 14 Feb 2016 00:39:27 +0000 (16:39 -0800)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"This includes the long awaited series to address a set of bugs around
active I/O remote-port LUN_RESET, as well as properly handling this
same case with concurrent fabric driver session disconnect ->
reconnect.
Note this set of LUN_RESET bug-fixes has been surviving extended
testing on both v4.5-rc1 and v3.14.y code over the last weeks, and is
CC'ed for stable as it's something folks using multiple ESX connected
hosts with slow backends can certainly trigger.
The highlights also include:
- Fix WRITE_SAME/DISCARD emulation 4k sector conversion in
target/iblock (Mike Christie)
- Fix TMR abort interaction and AIO type TMR response in qla2xxx
target (Quinn Tran + Swapnil Nagle)
- Fix >= v3.17 stale descriptor pointer regression in qla2xxx target
(Quinn Tran)
- Fix >= v4.5-rc1 return regression with unmap_zeros_data_store new
configfs store handler (nab)
- Add CPU affinity flag + convert qla2xxx to use bit (Quinn + HCH +
Bart)"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
qla2xxx: use TARGET_SCF_USE_CPUID flag to indiate CPU Affinity
target/transport: add flag to indicate CPU Affinity is observed
target: Fix incorrect unmap_zeroes_data_store return
qla2xxx: Use ATIO type to send correct tmr response
qla2xxx: Fix stale pointer access.
target/user: Fix cast from pointer to phys_addr_t
target: Drop legacy se_cmd->task_stop_comp + REQUEST_STOP usage
target: Fix race with SCF_SEND_DELAYED_TAS handling
target: Fix remote-port TMR ABORT + se_cmd fabric stop
target: Fix TAS handling for multi-session se_node_acls
target: Fix LUN_RESET active TMR descriptor handling
target: Fix LUN_RESET active I/O handling for ACK_KREF
qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM
qla2xxx: Fix warning reported by static checker
target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors
Linus Torvalds [Sat, 13 Feb 2016 21:05:56 +0000 (13:05 -0800)]
Merge branch 'fixes' of git://git./linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal management fixes from Eduardo Valentin:
"Specifics in this pull request:
- Compilation fixes on SPEAR, and U8500 thermal drivers.
- RCAR thermal driver now recognizes OF-thermal based thermal zones.
- Small code rework on OF-thermal.
- These change have been CI tested using KernelCI bot [1,2]. \o/
I am taking over on Rui's behalf while he is out. Happy New Chinese
Year!
[1] - https://kernelci.org/build/evalenti/kernel/v4.5-rc3-16-ga53b8394ec3c/
[2] - https://kernelci.org/boot/all/job/evalenti/kernel/v4.5-rc3-16-ga53b8394ec3c/"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: cpu_cooling: fix out of bounds access in time_in_idle
thermal: allow u8500-thermal driver to be a module
thermal: allow spear-thermal driver to be a module
thermal: spear: use __maybe_unused for PM functions
thermal: rcar: enable to use thermal-zone on DT
thermal: of: use for_each_available_child_of_node for child iterator
Linus Torvalds [Sat, 13 Feb 2016 21:04:47 +0000 (13:04 -0800)]
Merge tag 'sound-fix-4.5-rc4' of git://git./linux/kernel/git/tiwai/sound
Pull another sound fix from Takashi Iwai:
"This contains a fix for the double-free of usb-audio MIDI device at
probe failure"
* tag 'sound-fix-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: avoid freeing umidi object twice
Linus Torvalds [Sat, 13 Feb 2016 16:18:21 +0000 (08:18 -0800)]
Merge tag 'arc-4.5-fixes' of git://git./linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
"I've been sitting on some of these fixes for a while.
- Corner case of returning to delay slot from interrupt
- Changing default interrupt prioiry level
- Kconfig'ize support for super pages
- Other minor fixes"
* tag 'arc-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: mm: Introduce explicit super page size support
ARCv2: intc: Allow interruption by lowest priority interrupt
ARCv2: Check for LL-SC livelock only if LLSC is enabled
ARC: shrink cpuinfo by not saving full timer BCR
ARCv2: clocksource: Rename GRTC -> GFRC ...
ARCv2: STAR
9000950267: Handle return from intr to Delay Slot #2
Andrey Konovalov [Sat, 13 Feb 2016 08:08:06 +0000 (11:08 +0300)]
ALSA: usb-audio: avoid freeing umidi object twice
The 'umidi' object will be free'd on the error path by snd_usbmidi_free()
when tearing down the rawmidi interface. So we shouldn't try to free it
in snd_usbmidi_create() after having registered the rawmidi interface.
Found by KASAN.
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Fri, 12 Feb 2016 23:31:22 +0000 (15:31 -0800)]
Merge tag 'pci-v4.5-fixes-1' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"These are some Renesas binding updates for PCI host controllers, a
Broadcom fix for a regression we added in v4.5-rc1, and a fix for an
AER use-after-free problem that can cause memory corruption.
Summary:
AER:
Flush workqueue on device remove to avoid use-after-free (Sebastian Andrzej Siewior)
Broadcom iProc host bridge driver:
Allow multiple devices except on PAXC (Ray Jui)
Renesas R-Car host bridge driver:
Add gen2 device tree support for r8a7793 (Simon Horman)
Add device tree support for r8a7793 (Simon Horman)"
* tag 'pci-v4.5-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: rcar: Add device tree support for r8a7793
PCI: rcar: Add gen2 device tree support for r8a7793
PCI: iproc: Allow multiple devices except on PAXC
PCI/AER: Flush workqueue on device remove to avoid use-after-free
Linus Torvalds [Fri, 12 Feb 2016 21:12:27 +0000 (13:12 -0800)]
Merge branch 'akpm'(patches from Andrew)
Merge fixes from Andrew Morton:
"10 fixes"
The lockdep hlist conversion is in the locking tree too, waiting for the
next merge window. Andrew thought it should go in now. I'll take it,
since it fixes a real problem and looks trivially correct (famous last
words).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
arch/x86/Kconfig: CONFIG_X86_UV should depend on CONFIG_EFI
mm: fix pfn_t vs highmem
kernel/locking/lockdep.c: convert hash tables to hlists
mm,thp: fix spellos in describing __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
mm,thp: khugepaged: call pte flush at the time of collapse
mm/backing-dev.c: fix error path in wb_init()
mm, dax: check for pmd_none() after split_huge_pmd()
vsprintf: kptr_restrict is okay in IRQ when 2
mm: fix filemap.c kernel doc warning
ubsan: cosmetic fix to Kconfig text
Leon Romanovsky [Thu, 11 Feb 2016 19:09:57 +0000 (21:09 +0200)]
IB/mlx5: Fix RC transport send queue overhead computation
Fix the RC QPs send queue overhead computation to take into account
two additional segments in the WQE which are needed for registration
operations.
The ATOMIC and UMR segments can't coexist together, so chose maximum out
of them.
The commit
9e65dc371b5c ("IB/mlx5: Fix RC transport send queue overhead
computation") was intended to update RC transport as commit messages
states, but added the code to UC transport.
Fixes:
9e65dc371b5c ("IB/mlx5: Fix RC transport send queue overhead computation")
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Alex Estrin [Thu, 11 Feb 2016 21:30:51 +0000 (16:30 -0500)]
IB/ipoib: fix for rare multicast join race condition
A narrow window for race condition still exist between
multicast join thread and *dev_flush workers.
A kernel crash caused by prolong erratic link state changes
was observed (most likely a faulty cabling):
[167275.656270] BUG: unable to handle kernel NULL pointer dereference at
0000000000000020
[167275.665973] IP: [<
ffffffffa05f8f2e>] ipoib_mcast_join+0xae/0x1d0 [ib_ipoib]
[167275.674443] PGD 0
[167275.677373] Oops: 0000 [#1] SMP
...
[167275.977530] Call Trace:
[167275.982225] [<
ffffffffa05f92f0>] ? ipoib_mcast_free+0x200/0x200 [ib_ipoib]
[167275.992024] [<
ffffffffa05fa1b7>] ipoib_mcast_join_task+0x2a7/0x490
[ib_ipoib]
[167276.002149] [<
ffffffff8109d5fb>] process_one_work+0x17b/0x470
[167276.010754] [<
ffffffff8109e3cb>] worker_thread+0x11b/0x400
[167276.019088] [<
ffffffff8109e2b0>] ? rescuer_thread+0x400/0x400
[167276.027737] [<
ffffffff810a5aef>] kthread+0xcf/0xe0
Here was a hit spot:
ipoib_mcast_join() {
..............
rec.qkey = priv->broadcast->mcmember.qkey;
^^^^^^^
.....
}
Proposed patch should prevent multicast join task to continue
if link state change is detected.
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Changes from v4:
- as suggested by Doug Ledford, optimized spinlock usage,
i.e. ipoib_mcast_join() is called with lock held.
Changes from v3:
- sync with priv->lock before flag check.
Chages from v2:
- Move check for OPER_UP flag state to mcast_join() to
ensure no event worker is in progress.
- minor style fixes.
Changes from v1:
- No need to lock again if error detected.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Linus Torvalds [Fri, 12 Feb 2016 17:48:55 +0000 (09:48 -0800)]
Merge tag 'mmc-v4.5-rc2' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC fixes from Ulf Hansson:
"Here are some mmc fixes intended for v4.5 rc4.
MMC core:
- Fix an sysfs ABI regression
- Return an error in a specific error path dealing with mmc ioctls
MMC host:
- sdhci-pci|acpi: Fix card detect race for Intel BXT/APL
- sh_mmcif: Correct TX DMA channel allocation
- mmc_spi: Fix error handling for dma mapping errors
- sdhci-of-at91: Fix an unbalance issue for the runtime PM usage count
- pxamci: Fix the device-tree probe deferral path
- pxamci: Fix read-only GPIO polarity"
* tag 'mmc-v4.5-rc2' of git://git.linaro.org/people/ulf.hansson/mmc:
Revert "mmc: block: don't use parameter prefix if built as module"
mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL
mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
mmc: sdhci: Allow override of get_cd() called from sdhci_request()
mmc: sdhci: Allow override of mmc host operations
mmc: sh_mmcif: Correct TX DMA channel allocation
mmc: block: return error on failed mmc_blk_get()
mmc: pxamci: fix the device-tree probe deferral path
mmc: mmc_spi: add checks for dma mapping error
mmc: sdhci-of-at91: fix pm runtime unbalanced issue in error path
mmc: pxamci: fix again read-only gpio detection polarity
Linus Torvalds [Fri, 12 Feb 2016 17:42:05 +0000 (09:42 -0800)]
Merge tag 'sound-4.5-rc4' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"In this rc, we've got more volume than previous rc, unsurprisingly;
the majority of updates in ASoC are about Intel drivers, and another
major changes are the continued plumbing of ALSA timer bugs revealed
by syzkaller fuzzer. Hopefully both settle down now.
Other than that, HD-audio received a couple of code fixes as well as
the usual quirks, and various small fixes are found for FireWire
devices, ASoC codecs and drivers"
* tag 'sound-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (50 commits)
ASoC: arizona: fref must be limited in pseudo-fractional mode
ASoC: sigmadsp: Fix missleading return value
ALSA: timer: Fix race at concurrent reads
ALSA: firewire-digi00x: Drop bogus const type qualifier on dot_scrt()
ALSA: hda - Fix bad dereference of jack object
ALSA: timer: Fix race between stop and interrupt
ALSA: timer: Fix wrong instance passed to slave callbacks
ASoC: Intel: Add module tags for common match module
ASoC: Intel: Load the atom DPCM driver only
ASoC: Intel: Create independent acpi match module
ASoC: Intel: Revert "ASoC: Intel: fix ACPI probe regression with Atom DPCM driver"
ALSA: dummy: Implement timer backend switching more safely
ALSA: hda - Fix speaker output from VAIO AiO machines
Revert "ALSA: hda - Fix noise on Gigabyte Z170X mobo"
ALSA: firewire-tascam: remove needless member for control and status message
ALSA: firewire-tascam: remove a flag for controller
ALSA: firewire-tascam: add support for FW-1804
ALSA: firewire-tascam: fix NULL pointer dereference when model identification fails
ALSA: hda - Fix static checker warning in patch_hdmi.c
ASoC: Intel: Skylake: Remove autosuspend delay
...
Linus Torvalds [Fri, 12 Feb 2016 17:39:34 +0000 (09:39 -0800)]
Merge tag 'fbdev-fixes-4.5' of git://git./linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- fix omap2plus_defconfig to enable omapfb as it was in v4.4
- ocfb: fix timings for margins
- s6e8ax0, da8xx-fb: fix compile warnings
- mmp: fix build failure caused by bad printk parameters
- imxfb: fix clock issue which kept the display off
* tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
video: fbdev: imxfb: Provide a reset mechanism
fbdev: mmp: print IRQ resource using %pR format string
fbdev: da8xx-fb: remove incorrect type cast
fbdev: s6e8ax0: avoid unused function warnings
ocfb: fix tgdel and tvdel timing parameters
ARM: omap2plus_defconfig: update display configs
Linus Torvalds [Fri, 12 Feb 2016 17:32:37 +0000 (09:32 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A set of seven fixes:
Two regressions in the new hisi_sas arm driver, a blacklist entry for
the marvell console which was causing a reset cascade without it, a
race fix in the WRITE_SAME/DISCARD routines, a retry fix for the rdac
driver, without which, it would prematurely return EIO and a couple of
fixes for the hyper-v storvsc driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
block/sd: Return -EREMOTEIO when WRITE SAME and DISCARD are disabled
SCSI: Add Marvell Console to VPD blacklist
scsi_dh_rdac: always retry MODE SELECT on command lock violation
storvsc: Use the specified target ID in device lookup
storvsc: Install the storvsc specific timeout handler for FC devices
hisi_sas: fix v1 hw check for slot error
hisi_sas: add dependency for HAS_IOMEM
Linus Torvalds [Fri, 12 Feb 2016 17:27:31 +0000 (09:27 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm amd fixes from Dave Airlie:
"Been pretty quiet.
This is an amdgpu fixes pull from AMD, a bunch of powerplay stability
fixes, race fix, hibernate fix, and a possible circular locking fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (21 commits)
drm/amdgpu: fix issue with overlapping userptrs
drm/radeon: hold reference to fences in radeon_sa_bo_new
drm/amdgpu: remove unnecessary forward declaration
drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2)
drm/amdgpu: fix s4 resume
drm/amdgpu/cz: plumb pg flags through to powerplay
drm/amdgpu/tonga: plumb pg flags through to powerplay
drma/dmgpu: move cg and pg flags into shared headers
drm/amdgpu: remove unused cg defines
drm/amdgpu: add a cgs interface to fetch cg and pg flags
drm/amd/powerplay/tonga: disable vce pg
drm/amd/powerplay/tonga: disable uvd pg
drm/amd/powerplay/cz: disable vce pg
drm/amd/powerplay/cz: disable uvd pg
drm/amdgpu: be consistent with uvd cg flags
drm/amdgpu: clean up vce pg flags for cz/st
drm/amdgpu: handle vce pg flags properly
drm/amdgpu: handle uvd pg flags properly
drm/amdgpu/dpm/ci: switch over to the common pcie caps interface
drm/amdgpu/cik: don't mess with aspm if gpu is root bus
...
Linus Torvalds [Fri, 12 Feb 2016 17:24:48 +0000 (09:24 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
Pull crypto fix from James Morris.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
EVM: Use crypto_memneq() for digest comparisons
Linus Torvalds [Fri, 12 Feb 2016 17:21:28 +0000 (09:21 -0800)]
Merge branch 'for-linus-4.5' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"This has a few fixes from Filipe, along with a readdir fix from Dave
that we've been testing for some time"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: properly set the termination value of ctx->pos in readdir
Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl
Btrfs: remove no longer used function extent_read_full_page_nolock()
Btrfs: fix page reading in extent_same ioctl leading to csum errors
Btrfs: fix invalid page accesses in extent_same (dedup) ioctl
Linus Torvalds [Fri, 12 Feb 2016 17:17:03 +0000 (09:17 -0800)]
Merge tag 'xfs-fixes-for-linus-4.5' of git://git./linux/kernel/git/dgc/linux-xfs
Pull xfs fix from Dve Chinner:
"This contains a fix for an endian conversion issue in new CRC
validation in log recovery that was discovered on a ppc64 platform"
* tag 'xfs-fixes-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: fix endianness error when checking log block crc on big endian platforms
Takashi Iwai [Fri, 12 Feb 2016 08:48:51 +0000 (09:48 +0100)]
Merge tag 'asoc-fix-v4.5-rc4' of git://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.5
A rather large batch of fixes here, almost all in the Intel driver.
The changes that got merged in this merge window for Skylake were rather
large and as well as issues that you'd expect in a large block of new
code there were some problems created for older processors which needed
fixing up. Things are largely settling down now hopefully.
Ryan Ware [Thu, 11 Feb 2016 23:58:44 +0000 (15:58 -0800)]
EVM: Use crypto_memneq() for digest comparisons
This patch fixes vulnerability CVE-2016-2085. The problem exists
because the vm_verify_hmac() function includes a use of memcmp().
Unfortunately, this allows timing side channel attacks; specifically
a MAC forgery complexity drop from 2^128 to 2^12. This patch changes
the memcmp() to the cryptographically safe crypto_memneq().
Reported-by: Xiaofei Rex Guo <xiaofei.rex.guo@intel.com>
Signed-off-by: Ryan Ware <ware@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Vineet Gupta [Wed, 10 Feb 2016 01:22:07 +0000 (06:52 +0530)]
ARC: mm: Introduce explicit super page size support
MMUv4 supports 2 concurrent page sizes: Normal and Super [4K to 16M]
So far Linux supported a single super page size for a given Normal page,
depending on the software page walking address split.
e.g. we had 11:8:13 address split for 8K page, which meant super page
was 2 ^(8+13) = 2M (given that THP size has to be PMD_SHIFT)
Now we turn this around, by allowing multiple Super Pages in Kconfig
(currently 2M and 16M only) and forcing page walker address split to
PGDIR_SHIFT and PAGE_SHIFT
For configs without Super page, things are same as before and
PGDIR_SHIFT can be hacked to get non default address split
The motivation for this change is a customer who needs 16M super page
and a 8K Normal page combo.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Greg Kroah-Hartman [Fri, 12 Feb 2016 04:10:58 +0000 (20:10 -0800)]
Merge tag 'phy-for-4.5-rc' of git://git./linux/kernel/git/kishon/linux-phy into usb-linus
Kishon writes:
phy: for 4.5-rc
*) Fix error handling code in phy core [phy_power_on()]
*) phy-twl4030-usb fixes for unloading the module
*) Restrict phy-hi6220-usb to HiSilicon arm64
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Andrew Morton [Fri, 12 Feb 2016 00:13:20 +0000 (16:13 -0800)]
arch/x86/Kconfig: CONFIG_X86_UV should depend on CONFIG_EFI
arch/x86/built-in.o: In function `uv_bios_call':
(.text+0xeba00): undefined reference to `efi_call'
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Williams [Fri, 12 Feb 2016 00:13:17 +0000 (16:13 -0800)]
mm: fix pfn_t vs highmem
The pfn_t type uses an unsigned long to store a pfn + flags value. On a
64-bit platform the upper 12 bits of an unsigned long are never used for
storing the value of a pfn. However, this is not true on highmem
platforms, all 32-bits of a pfn value are used to address a 44-bit
physical address space. A pfn_t needs to store a 64-bit value.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=112211
Fixes:
01c8f1c44b83 ("mm, dax, gpu: convert vm_insert_mixed to pfn_t")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Stuart Foster <smf.linux@ntlworld.com>
Reported-by: Julian Margetson <runaway@candw.ms>
Tested-by: Julian Margetson <runaway@candw.ms>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Fri, 12 Feb 2016 00:13:14 +0000 (16:13 -0800)]
kernel/locking/lockdep.c: convert hash tables to hlists
Mike said:
: CONFIG_UBSAN_ALIGNMENT breaks x86-64 kernel with lockdep enabled, i. e
: kernel with CONFIG_UBSAN_ALIGNMENT fails to load without even any error
: message.
:
: The problem is that ubsan callbacks use spinlocks and might be called
: before lockdep is initialized. Particularly this line in the
: reserve_ebda_region function causes problem:
:
: lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
:
: If i put lockdep_init() before reserve_ebda_region call in
: x86_64_start_reservations kernel loads well.
Fix this ordering issue permanently: change lockdep so that it uses
hlists for the hash tables. Unlike a list_head, an hlist_head is in its
initialized state when it is all-zeroes, so lockdep is ready for
operation immediately upon boot - lockdep_init() need not have run.
The patch will also save some memory.
lockdep_init() and lockdep_initialized can be done away with now - a 4.6
patch has been prepared to do this.
Reported-by: Mike Krinkin <krinkin.m.u@gmail.com>
Suggested-by: Mike Krinkin <krinkin.m.u@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vineet Gupta [Fri, 12 Feb 2016 00:13:11 +0000 (16:13 -0800)]
mm,thp: fix spellos in describing __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
[akpm@linux-foundation.org: s/threshhold/threshold/]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vineet Gupta [Fri, 12 Feb 2016 00:13:09 +0000 (16:13 -0800)]
mm,thp: khugepaged: call pte flush at the time of collapse
This showed up on ARC when running LMBench bw_mem tests as Overlapping
TLB Machine Check Exception triggered due to STLB entry (2M pages)
overlapping some NTLB entry (regular 8K page).
bw_mem 2m touches a large chunk of vaddr creating NTLB entries. In the
interim khugepaged kicks in, collapsing the contiguous ptes into a
single pmd. pmdp_collapse_flush()->flush_pmd_tlb_range() is called to
flush out NTLB entries for the ptes. This for ARC (by design) can only
shootdown STLB entries (for pmd). The stray NTLB entries cause the
overlap with the subsequent STLB entry for collapsed page. So make
pmdp_collapse_flush() call pte flush interface not pmd flush.
Note that originally all thp flush call sites in generic code called
flush_tlb_range() leaving it to architecture to implement the flush for
pte and/or pmd. Commit
12ebc1581ad11454 changed this by calling a new
opt-in API flush_pmd_tlb_range() which made the semantics more explicit
but failed to distinguish the pte vs pmd flush in generic code, which is
what this patch fixes.
Note that ARC can fixed w/o touching the generic pmdp_collapse_flush()
by defining a ARC version, but that defeats the purpose of generic
version, plus sementically this is the right thing to do.
Fixes STAR
9000961194: LMBench on AXS103 triggering duplicate TLB
exceptions with super pages
Fixes:
12ebc1581ad11454 ("mm,thp: introduce flush_pmd_tlb_range")
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.4]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rasmus Villemoes [Fri, 12 Feb 2016 00:13:06 +0000 (16:13 -0800)]
mm/backing-dev.c: fix error path in wb_init()
We need to use post-decrement to get percpu_counter_destroy() called on
&wb->stat[0]. Moreover, the pre-decremebt would cause infinite
out-of-bounds accesses if the setup code failed at i==0.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Fri, 12 Feb 2016 00:13:03 +0000 (16:13 -0800)]
mm, dax: check for pmd_none() after split_huge_pmd()
DAX implements split_huge_pmd() by clearing pmd. This simple approach
reduces memory overhead, as we don't need to deposit page table on huge
page mapping to make split_huge_pmd() never-fail. PTE table can be
allocated and populated later on page fault from backing store.
But one side effect is that have to check if pmd is pmd_none() after
split_huge_pmd(). In most places we do this already to deal with
parallel MADV_DONTNEED.
But I found two call sites which is not affected by MADV_DONTNEED (due
down_write(mmap_sem)), but need to have the check to work with DAX
properly.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason A. Donenfeld [Fri, 12 Feb 2016 00:13:00 +0000 (16:13 -0800)]
vsprintf: kptr_restrict is okay in IRQ when 2
The kptr_restrict flag, when set to 1, only prints the kernel address
when the user has CAP_SYSLOG. When it is set to 2, the kernel address
is always printed as zero. When set to 1, this needs to check whether
or not we're in IRQ.
However, when set to 2, this check is unneccessary, and produces
confusing results in dmesg. Thus, only make sure we're not in IRQ when
mode 1 is used, but not mode 2.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Fri, 12 Feb 2016 00:12:58 +0000 (16:12 -0800)]
mm: fix filemap.c kernel doc warning
Add missing kernel-doc notation for function parameter 'gfp_mask' to fix
kernel-doc warning.
mm/filemap.c:1898: warning: No description found for parameter 'gfp_mask'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yang Shi [Fri, 12 Feb 2016 00:12:55 +0000 (16:12 -0800)]
ubsan: cosmetic fix to Kconfig text
When enabling UBSAN_SANITIZE_ALL, the kernel image size gets increased
significantly (~3x). So, it sounds better to have some note in Kconfig.
And, fixed a typo.
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 11 Feb 2016 19:25:55 +0000 (11:25 -0800)]
Merge tag 'gpio-v4.5-2' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
- Probe errorpath fix for the Altera
- irqchip ofnode pointer added to the DaVinci driver
- controller instance number correction for DaVinci
* tag 'gpio-v4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: davinci: Fix the number of controllers allocated
gpio: davinci: Add the missing of-node pointer
gpio: gpio-altera: Remove gpiochip on probe failure.
Linus Torvalds [Thu, 11 Feb 2016 19:17:19 +0000 (11:17 -0800)]
Merge tag 'platform-drivers-x86-v4.5-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Just two small fixes for the 4.5-rc cycle:
intel_scu_ipcutil:
- underflow in scu_reg_access()
intel-hid:
- fix incorrect entries in intel_hid_keymap"
* tag 'platform-drivers-x86-v4.5-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
intel_scu_ipcutil: underflow in scu_reg_access()
intel-hid: fix incorrect entries in intel_hid_keymap
Linus Torvalds [Thu, 11 Feb 2016 19:00:34 +0000 (11:00 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix BPF handling of branch offset adjustmnets on backjumps, from
Daniel Borkmann.
2) Make sure selinux knows about SOCK_DESTROY netlink messages, from
Lorenzo Colitti.
3) Fix openvswitch tunnel mtu regression, from David Wragg.
4) Fix ICMP handling of TCP sockets in syn_recv state, from Eric
Dumazet.
5) Fix SCTP user hmacid byte ordering bug, from Xin Long.
6) Fix recursive locking in ipv6 addrconf, from Subash Abhinov
Kasiviswanathan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
bpf: fix branch offset adjustment on backjumps after patching ctx expansion
vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices
geneve: Relax MTU constraints
vxlan: Relax MTU constraints
flow_dissector: Fix unaligned access in __skb_flow_dissector when used by eth_get_headlen
of: of_mdio: Add marvell, 88e1145 to whitelist of PHY compatibilities.
selinux: nlmsgtab: add SOCK_DESTROY to the netlink mapping tables
sctp: translate network order to host order when users get a hmacid
enic: increment devcmd2 result ring in case of timeout
tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segs
net:Add sysctl_max_skb_frags
tcp: do not drop syn_recv on all icmp reports
ipv6: fix a lockdep splat
unix: correctly track in-flight fds in sending process user_struct
update be2net maintainers' email addresses
dwc_eth_qos: Reset hardware before PHY start
ipv6: addrconf: Fix recursive spin lock call
Eran Ben Elisha [Thu, 11 Feb 2016 08:24:42 +0000 (10:24 +0200)]
IB/core: Fix reading capability mask of the port info class
When checking specific attribute from a bit mask, need to use bitwise
AND and not logical AND, fixed that.
Fixes:
145d9c541032 ('IB/core: Display extended counter set if
available')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rasmus Villemoes [Tue, 9 Feb 2016 20:11:14 +0000 (21:11 +0100)]
net/mlx4: fix some error handling in mlx4_multi_func_init()
The while loop after err_slaves should use post-decrement; otherwise
we'll fail to do the kfrees for i==0, and will run into out-of-bounds
accesses if the setup above failed already at i==0.
[I'm not sure why one even bothers populating the ->vlan_filter array:
mlx4.h isn't #included by anything outside
drivers/net/ethernet/mellanox/mlx4/, and "git grep -C2 -w vlan_filter
drivers/net/ethernet/mellanox/mlx4/" seems to suggest that the
vlan_filter elements aren't used at all.]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ulf Hansson [Thu, 11 Feb 2016 15:42:58 +0000 (16:42 +0100)]
Revert "mmc: block: don't use parameter prefix if built as module"
This reverts commit
829b6962f7e3cfc06f7c5c26269fd47ad48cf503.
Revert this change as it causes a sysfs path to change and therefore
introduces and ABI regression. More precisely Android's vold is not being
able to access /sys/module/mmcblk/parameters/perdev_minors any more, since
the path becomes changed to: "/sys/module/mmc_block/..."
Fixes:
829b6962f7e3 ("mmc: block: don't use parameter prefix if built as
module")
Reported-by: John Stultz <john.stultz@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Javi Merino [Thu, 11 Feb 2016 12:00:51 +0000 (12:00 +0000)]
thermal: cpu_cooling: fix out of bounds access in time_in_idle
In __cpufreq_cooling_register() we allocate the arrays for time_in_idle
and time_in_idle_timestamp to be as big as the number of cpus in this
cpufreq device. However, in get_load() we access this array using the
cpu number as index, which can result in an out of bound access.
Index time_in_idle{,_timestamp} using the index in the cpufreq_device's
allowed_cpus mask, as we do for the load_cpu array in
cpufreq_get_requested_power()
Reported-by: Nicolas Boichat <drinkcat@chromium.org>
Cc: Amit Daniel Kachhap <amit.kachhap@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
David Sterba [Fri, 13 Nov 2015 12:44:28 +0000 (13:44 +0100)]
btrfs: properly set the termination value of ctx->pos in readdir
The value of ctx->pos in the last readdir call is supposed to be set to
INT_MAX due to 32bit compatibility, unless 'pos' is intentially set to a
larger value, then it's LLONG_MAX.
There's a report from PaX SIZE_OVERFLOW plugin that "ctx->pos++"
overflows (https://forums.grsecurity.net/viewtopic.php?f=1&t=4284), on a
64bit arch, where the value is 0x7fffffffffffffff ie. LLONG_MAX before
the increment.
We can get to that situation like that:
* emit all regular readdir entries
* still in the same call to readdir, bump the last pos to INT_MAX
* next call to readdir will not emit any entries, but will reach the
bump code again, finds pos to be INT_MAX and sets it to LLONG_MAX
Normally this is not a problem, but if we call readdir again, we'll find
'pos' set to LLONG_MAX and the unconditional increment will overflow.
The report from Victor at
(http://thread.gmane.org/gmane.comp.file-systems.btrfs/49500) with debugging
print shows that pattern:
Overflow: e
Overflow:
7fffffff
Overflow:
7fffffffffffffff
PAX: size overflow detected in function btrfs_real_readdir
fs/btrfs/inode.c:5760 cicus.935_282 max, count: 9, decl: pos; num: 0;
context: dir_context;
CPU: 0 PID: 2630 Comm: polkitd Not tainted 4.2.3-grsec #1
Hardware name: Gigabyte Technology Co., Ltd. H81ND2H/H81ND2H, BIOS F3 08/11/2015
ffffffff81901608 0000000000000000 ffffffff819015e6 ffffc90004973d48
ffffffff81742f0f 0000000000000007 ffffffff81901608 ffffc90004973d78
ffffffff811cb706 0000000000000000 ffff8800d47359e0 ffffc90004973ed8
Call Trace:
[<
ffffffff81742f0f>] dump_stack+0x4c/0x7f
[<
ffffffff811cb706>] report_size_overflow+0x36/0x40
[<
ffffffff812ef0bc>] btrfs_real_readdir+0x69c/0x6d0
[<
ffffffff811dafc8>] iterate_dir+0xa8/0x150
[<
ffffffff811e6d8d>] ? __fget_light+0x2d/0x70
[<
ffffffff811dba3a>] SyS_getdents+0xba/0x1c0
Overflow: 1a
[<
ffffffff811db070>] ? iterate_dir+0x150/0x150
[<
ffffffff81749b69>] entry_SYSCALL_64_fastpath+0x12/0x83
The jump from
7fffffff to
7fffffffffffffff happens when new dir entries
are not yet synced and are processed from the delayed list. Then the code
could go to the bump section again even though it might not emit any new
dir entries from the delayed list.
The fix avoids entering the "bump" section again once we've finished
emitting the entries, both for synced and delayed entries.
References: https://forums.grsecurity.net/viewtopic.php?f=1&t=4284
Reported-by: Victor <services@swwu.com>
CC: stable@vger.kernel.org
Signed-off-by: David Sterba <dsterba@suse.com>
Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Signed-off-by: Chris Mason <clm@fb.com>
Linus Walleij [Wed, 10 Feb 2016 08:25:17 +0000 (09:25 +0100)]
ARM: 8519/1: ICST: try other dividends than 1
Since the dawn of time the ICST code has only supported divide
by one or hang in an eternal loop. Luckily we were always dividing
by one because the reference frequency for the systems using
the ICSTs is 24MHz and the [min,max] values for the PLL input
if [10,320] MHz for ICST307 and [6,200] for ICST525, so the loop
will always terminate immediately without assigning any divisor
for the reference frequency.
But for the code to make sense, let's insert the missing i++
Reported-by: David Binderman <dcb314@hotmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Thomas Gleixner [Thu, 11 Feb 2016 10:47:55 +0000 (11:47 +0100)]
Merge tag 'gic-fixes-4.5-rc4' of git://git./linux/kernel/git/maz/arm-platforms into irq/urgent
Pull GIC fixes from Marc for 4.5-rc4:
- Two fixes addressing cascaded GICv1/GICv2 (affinity setting, EOImode)
- One fix addressing possible missed interrupts on GICv3
Adrian Hunter [Tue, 9 Feb 2016 14:12:38 +0000 (16:12 +0200)]
mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL
Intel BXT/APL use a card detect GPIO however the host controller
will not enable bus power unless it's card detect also reflects
the presence of a card. Unfortunately those 2 things race which
can result in commands not starting, after which the controller
does nothing and there is a 10 second wait for the driver's
10-second timer to timeout.
That is fixed by having the driver look also at the present state
register to determine if the card is present. Consequently, provide
a 'get_cd' mmc host operation for BXT/APL that does that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Adrian Hunter [Tue, 9 Feb 2016 14:12:37 +0000 (16:12 +0200)]
mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
Intel BXT/APL use a card detect GPIO however the host controller
will not enable bus power unless it's card detect also reflects
the presence of a card. Unfortunately those 2 things race which
can result in commands not starting, after which the controller
does nothing and there is a 10 second wait for the driver's
10-second timer to timeout.
That is fixed by having the driver look also at the present state
register to determine if the card is present. Consequently, provide
a 'get_cd' mmc host operation for BXT/APL that does that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Adrian Hunter [Tue, 9 Feb 2016 14:12:36 +0000 (16:12 +0200)]
mmc: sdhci: Allow override of get_cd() called from sdhci_request()
Drivers may need to provide their own get_cd() mmc host op, but
currently the internals of the current op (sdhci_get_cd()) are
provided by sdhci_do_get_cd() which is also called from
sdhci_request().
To allow override of the get_cd functionality, change sdhci_request()
to call ->get_cd() instead of sdhci_do_get_cd().
Note, in the future the call to ->get_cd() will likely be removed
from sdhci_request() since most drivers don't need actually it.
However this change is being done now to facilitate a subsequent
bug fix.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Adrian Hunter [Tue, 9 Feb 2016 14:12:35 +0000 (16:12 +0200)]
mmc: sdhci: Allow override of mmc host operations
In the past, fixes for specific hardware devices were implemented
in sdhci using quirks. That approach is no longer accepted because
the growing number of quirks was starting to make the code difficult
to understand and maintain.
One alternative to quirks, is to allow drivers to override the default
mmc host operations. This patch makes it easy to do that, and it is
needed for a subsequent bug fix, for which separate patches are
provided.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Daniel Wagner [Wed, 10 Feb 2016 09:21:21 +0000 (10:21 +0100)]
mips: Differentiate between 32 and 64 bit ELF header
Depending on the configuration either the 32 or 64 bit version of
elf_check_arch() is defined. parse_crash_elf{32|64}_headers() does
some basic verification of the ELF header via
vmcore_elf{32|64}_check_arch() which happen to map to elf_check_arch().
Since the implementation 32 and 64 bit version of elf_check_arch()
differ, we use the wrong type:
In file included from include/linux/elf.h:4:0,
from fs/proc/vmcore.c:13:
fs/proc/vmcore.c: In function 'parse_crash_elf64_headers':
>> arch/mips/include/asm/elf.h:228:23: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
struct elfhdr *__h = (hdr); \
^
include/linux/crash_dump.h:41:37: note: in expansion of macro 'elf_check_arch'
#define vmcore_elf64_check_arch(x) (elf_check_arch(x) || vmcore_elf_check_arch_cross(x))
^
fs/proc/vmcore.c:1015:4: note: in expansion of macro 'vmcore_elf64_check_arch'
!vmcore_elf64_check_arch(&ehdr) ||
^
Therefore, we rather define vmcore_elf{32|64}_check_arch() as a
basic machine check and use it also in binfm_elf?32.c as well.
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Suggested-by: Maciej W. Rozycki <macro@imgtec.com>
Reviewed-by: Maciej W. Rozycki <macro@imgtec.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12529/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Tirumalesh Chalamarla [Thu, 4 Feb 2016 18:45:25 +0000 (10:45 -0800)]
irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor
The ARM GICv3 specification mentions the need for dsb after a read
from the ICC_IAR1_EL1 register:
4.1.1 Physical CPU Interface:
The effects of reading ICC_IAR0_EL1 and ICC_IAR1_EL1
on the state of a returned INTID are not guaranteed
to be visible until after the execution of a DSB.
Not having this could result in missed interrupts, so let's add the
required barrier.
[Marc: fixed commit message]
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Tirumalesh Chalamarla <tchalamarla@caviumnetworks.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Jon Hunter [Tue, 9 Feb 2016 15:24:57 +0000 (15:24 +0000)]
irqchip/gic: Only set the EOImodeNS bit for the root controller
EOImode1 is only used for the root controller and hence only the root
controller uses the eoimode1 functions for handling interrupts. However,
if the root controller supports EOImode1, then the EOImodeNS bit will be
set for all GICs, enabling EOImode1. This is not what we want and this
causes interrupts on non-root GICs to only be dropped in priority but
never deactivated. Therefore, only set the EOImodeNS bit for the root
controller.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Jon Hunter [Tue, 9 Feb 2016 15:24:56 +0000 (15:24 +0000)]
irqchip/gic: Only populate set_affinity for the root controller
Setting the affinity of an IRQ, it only applicable for the root
interrupt controller and so only populate this operator for the root
controller.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Daniel Stone [Mon, 8 Feb 2016 21:12:58 +0000 (21:12 +0000)]
component: remove device from master match list on failed add
Calling component_add() may result in the completion of a set of
devices, which will try to bring up a master. In bringing the master
up, we populate its match array with the current set of children.
If binding any of the devices fails, component_add() itself will fail,
free the struct component entry, and return to the caller. The
now-freed entry is never removed from the master's match array, and
will later be used in a futile attempt to bind to freed memory.
Bring component_add's behaviour on failure to bring up a master into
line with component_del by removing the (to-be-freed) component from
the master's match array.
The specific case which broke was:
- rockchip_drm_drv adds a component master
- dwhdmi_rockchip adds a child component in probe (master incomplete)
- rockchip_drm_vop adds two children in probe, which completes the
set
- inside component_add, we try to bring up the master, having
populated the master's match array, and fail with EPROBE_DEFER from
dwhdmi_rockchip; we delete the putative component
- rockchip_drm_vop's probe fails and returns EPROBE_DEFER
- we later re-probe rockchip_drm_vop and add the component; the
master is complete, so we attempt to bring it up again
- walking the match array, we find the previous child, whose master
pointer doesn't match (as it has been freed in the meantime)
- rockchip_drm_vop probe fails, and will never be attempted again
Fixes:
ffc30b74fd6d01588bd3fdebc3b1acc0857e6fc8
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Quinn Tran [Wed, 10 Feb 2016 23:59:14 +0000 (18:59 -0500)]
qla2xxx: use TARGET_SCF_USE_CPUID flag to indiate CPU Affinity
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Fixes: fb3269b ("qla2xxx: Add selective command queuing")
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>