bpf: Fix leakage of uninitialized bpf stack under speculation

commit 801c6058d14a82179a7ee17a4b532cac6fad067f upstream.

The current implemented mechanisms to mitigate data disclosure under
speculation mainly address stack and map value oob access from the
speculative domain. However, Piotr discovered that uninitialized BPF
stack is not protected yet, and thus old data from the kernel stack,
potentially including addresses of kernel structures, could still be
extracted from that 512 bytes large window. The BPF stack is special
compared to map values since it's not zero initialized for every
program invocation, whereas map values /are/ zero initialized upon
their initial allocation and thus cannot leak any prior data in either
domain. In the non-speculative domain, the verifier ensures that every
stack slot read must have a prior stack slot write by the BPF program
to avoid such data leaking issue.

However, this is not enough: for example, when the pointer arithmetic
operation moves the stack pointer from the last valid stack offset to
the first valid offset, the sanitation logic allows for any intermediate
offsets during speculative execution, which could then be used to
extract any restricted stack content via side-channel.

Given for unprivileged stack pointer arithmetic the use of unknown
but bounded scalars is generally forbidden, we can simply turn the
register-based arithmetic operation into an immediate-based arithmetic
operation without the need for masking. This also gives the benefit
of reducing the needed instructions for the operation. Given after
the work in 7fedb63a8307 ("bpf: Tighten speculative pointer arithmetic
mask"), the aux->alu_limit already holds the final immediate value for
the offset register with the known scalar. Thus, a simple mov of the
immediate to AX register with using AX as the source for the original
instruction is sufficient and possible now in this case.

Reported-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix masking negation logic upon negative dst register

commit b9b34ddbe2076ade359cd5ce7537d5ed019e9807 upstream.

The negation logic for the case where the off_reg is sitting in the
dst register is not correct given then we cannot just invert the add
to a sub or vice versa. As a fix, perform the final bitwise and-op
unconditionally into AX from the off_reg, then move the pointer from
the src to dst and finally use AX as the source for the original
pointer arithmetic operation such that the inversion yields a correct
result. The single non-AX mov in between is possible given constant
blinding is retaining it as it's not an immediate based operation.

Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igb: Enable RSS for Intel I211 Ethernet Controller

commit 6e6026f2dd2005844fb35c3911e8083c09952c6c upstream.

The Intel I211 Ethernet Controller supports 2 Receive Side Scaling (RSS)
queues. It should not be excluded from having this feature enabled.

Via commit c883de9fd787 ("igb: rename igb define to be more generic")
E1000_MRQC_ENABLE_RSS_4Q was renamed to E1000_MRQC_ENABLE_RSS_MQ to
indicate that this is a generic bit flag to enable queues and not
a flag that is specific to devices that support 4 queues

The bit flag enables 2, 4 or 8 queues appropriately depending on the part.

Tested with a multicore CPU and frames were then distributed as expected.

This issue appears to have been introduced because of confusion caused
by the prior name.

Signed-off-by: Nick Lowe <nick.lowe@gmail.com>
Tested-by: David Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: ax88179_178a: initialize local variables before use

commit bd78980be1a68d14524c51c4b4170782fada622b upstream.

Use memset to initialize local array in drivers/net/usb/ax88179_178a.c, and
also set a local u16 and u32 variable to 0. Fixes a KMSAN found uninit-value bug
reported by syzbot at:
https://syzkaller.appspot.com/bug?id=00371c73c72f72487c1d0bfe0cc9d00de339d5aa

Reported-by: syzbot+4993e4a0e237f1b53747@syzkaller.appspotmail.com
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: conntrack: Make global sysctls readonly in non-init netns

commit 2671fa4dc0109d3fb581bc3078fdf17b5d9080f6 upstream.

These sysctls point to global variables:
- NF_SYSCTL_CT_MAX (&nf_conntrack_max)
- NF_SYSCTL_CT_EXPECT_MAX (&nf_ct_expect_max)
- NF_SYSCTL_CT_BUCKETS (&nf_conntrack_htable_size_user)

Because their data pointers are not updated to point to per-netns
structures, they must be marked read-only in a non-init_net ns.
Otherwise, changes in any net namespace are reflected in (leaked into)
all other net namespaces. This problem has existed since the
introduction of net namespaces.

The current logic marks them read-only only if the net namespace is
owned by an unprivileged user (other than init_user_ns).

Commit d0febd81ae77 ("netfilter: conntrack: re-visit sysctls in
unprivileged namespaces") "exposes all sysctls even if the namespace is
unpriviliged." Since we need to mark them readonly in any case, we can
forego the unprivileged user check altogether.

Fixes: d0febd81ae77 ("netfilter: conntrack: re-visit sysctls in unprivileged namespaces")
Signed-off-by: Jonathon Reinhart <Jonathon.Reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips: Do not include hi and lo in clobber list for R6

commit 1d7ba0165d8206ac073f7ac3b14fc0836b66eae7 upstream.

From [1]
"GCC 10 (PR 91233) won't silently allow registers that are not
architecturally available to be present in the clobber list anymore,
resulting in build failure for mips*r6 targets in form of:
...
.../sysdep.h:146:2: error: the register ‘lo’ cannot be clobbered in ‘asm’ for the current target
  146 |  __asm__ volatile (      \
      |  ^~~~~~~

This is because base R6 ISA doesn't define hi and lo registers w/o DSP
extension. This patch provides the alternative clobber list for r6 targets
that won't include those registers."

Since kernel 5.4 and mips support for generic vDSO [2], the kernel fail to
build for mips r6 cpus with gcc 10 for the same reason as glibc.

[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=020b2a97bb15f807c0482f0faee2184ed05bcad8
[2] '24640f233b46 ("mips: Add support for generic vDSO")'

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.34

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210430141910.693887691@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: add Alder Lake P device id.

commit 0df74278faedf20f9696bf2755cf0ce34afa4c3a upstream.

Add Alder Lake P device ID.

Cc: <stable@vger.kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210414045200.3498241-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_gen2_enqueue_hcmd()

commit e7020bb068d8be50a92f48e36b236a1a1ef9282e upstream.

Analogically to what we did in 2800aadc18a6 ("iwlwifi: Fix softirq/hardirq
disabling in iwl_pcie_enqueue_hcmd()"), we must apply the same fix to
iwl_pcie_gen2_enqueue_hcmd(), as it's being called from exactly the same
contexts.

Reported-by: Heiner Kallweit <hkallweit1@gmail.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2104171112390.18270@cbobk.fhfr.pm
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.33

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-By: Patrick McCormick <pmccormick@digitalocean.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Andrei Rabusov <arabusov@gmail.com>
Link: https://lore.kernel.org/r/20210426072818.777662399@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: CDC-ACM: fix poison/unpoison imbalance

commit a8b3b519618f30a87a304c4e120267ce6f8dc68a upstream.

suspend() does its poisoning conditionally, resume() does it
unconditionally. On a device with combined interfaces this
will balance, on a device with two interfaces the counter will
go negative and resubmission will fail.

Both actions need to be done conditionally.

Fixes: 6069e3e927c8f ("USB: cdc-acm: untangle a circular dependency between callback and softint")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210421074513.4327-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hso: fix NULL-deref on disconnect regression

commit 2ad5692db72874f02b9ad551d26345437ea4f7f3 upstream.

Commit 8a12f8836145 ("net: hso: fix null-ptr-deref during tty device
unregistration") fixed the racy minor allocation reported by syzbot, but
introduced an unconditional NULL-pointer dereference on every disconnect
instead.

Specifically, the serial device table must no longer be accessed after
the minor has been released by hso_serial_tty_unregister().

Fixes: 8a12f8836145 ("net: hso: fix null-ptr-deref during tty device unregistration")
Cc: stable@vger.kernel.org
Cc: Anirudh Rayabharam <mail@anirudhrb.com>
Reported-by: Leonardo Antoniazzi <leoanto@aruba.it>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Anirudh Rayabharam <mail@anirudhrb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access

commit 5849cdf8c120e3979c57d34be55b92d90a77a47e upstream.

Commit in Fixes: added support for kexec-ing a kernel on panic using a
new system call. As part of it, it does prepare a memory map for the new
kernel.

However, while doing so, it wrongly accesses memory it has not
allocated: it accesses the first element of the cmem->ranges[] array in
memmap_exclude_ranges() but it has not allocated the memory for it in
crash_setup_memmap_entries(). As KASAN reports:

  BUG: KASAN: vmalloc-out-of-bounds in crash_setup_memmap_entries+0x17e/0x3a0
  Write of size 8 at addr ffffc90000426008 by task kexec/1187

  (gdb) list *crash_setup_memmap_entries+0x17e
  0xffffffff8107cafe is in crash_setup_memmap_entries (arch/x86/kernel/crash.c:322).
  317                                      unsigned long long mend)
  318     {
  319             unsigned long start, end;
  320
  321             cmem->ranges[0].start = mstart;
  322             cmem->ranges[0].end = mend;
  323             cmem->nr_ranges = 1;
  324
  325             /* Exclude elf header region */
  326             start = image->arch.elf_load_addr;
  (gdb)

Make sure the ranges array becomes a single element allocated.

 [ bp: Write a proper commit message. ]

Fixes: dd5f726076cc ("kexec: support for kexec on panic using new system call")
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Young <dyoung@redhat.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/725fa3dc1da2737f0f6188a1a9701bead257ea9d.camel@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ia64: tools: remove duplicate definition of ia64_mf() on ia64

[ Upstream commit f4bf09dc3aaa4b07cd15630f2023f68cb2668809 ]

The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is
already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf
failing to build:

    CC       /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o
  In file included from /usr/src/linux/tools/include/asm/barrier.h:24,
                   from /usr/src/linux/tools/include/linux/ring_buffer.h:4,
                   from libbpf.c:37:
  /usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror]
     43 | #define ia64_mf()       asm volatile ("mf" ::: "memory")
        |
  In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20,
                   from /usr/include/ia64-linux-gnu/asm/swab.h:11,
                   from /usr/include/linux/swab.h:8,
                   from /usr/include/linux/byteorder/little_endian.h:13,
                   from /usr/include/ia64-linux-gnu/asm/byteorder.h:5,
                   from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20,
                   from libbpf.c:36:
  /usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition
    382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory")
        |
  cc1: all warnings being treated as errors

Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h.

Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ia64: fix discontig.c section mismatches

[ Upstream commit e2af9da4f867a1a54f1252bf3abc1a5c63951778 ]

Fix IA64 discontig.c Section mismatch warnings.

When CONFIG_SPARSEMEM=y and CONFIG_MEMORY_HOTPLUG=y, the functions
computer_pernodesize() and scatter_node_data() should not be marked as
__meminit because they are needed after init, on any memory hotplug
event.  Also, early_nr_cpus_node() is called by compute_pernodesize(),
so early_nr_cpus_node() cannot be __meminit either.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1612): Section mismatch in reference from the function arch_alloc_nodedata() to the function .meminit.text:compute_pernodesize()
  The function arch_alloc_nodedata() references the function __meminit compute_pernodesize().
  This is often because arch_alloc_nodedata lacks a __meminit annotation or the annotation of compute_pernodesize is wrong.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1692): Section mismatch in reference from the function arch_refresh_nodedata() to the function .meminit.text:scatter_node_data()
  The function arch_refresh_nodedata() references the function __meminit scatter_node_data().
  This is often because arch_refresh_nodedata lacks a __meminit annotation or the annotation of scatter_node_data is wrong.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1502): Section mismatch in reference from the function compute_pernodesize() to the function .meminit.text:early_nr_cpus_node()
  The function compute_pernodesize() references the function __meminit early_nr_cpus_node().
  This is often because compute_pernodesize lacks a __meminit annotation or the annotation of early_nr_cpus_node is wrong.

Link: https://lkml.kernel.org/r/20210411001201.3069-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

csky: change a Kconfig symbol name to fix e1000 build error

[ Upstream commit d199161653d612b8fb96ac51bfd5b2d2782ecef3 ]

e1000's #define of CONFIG_RAM_BASE conflicts with a Kconfig symbol in
arch/csky/Kconfig.

The symbol in e1000 has been around longer, so change arch/csky/ to use
DRAM_BASE instead of RAM_BASE to remove the conflict.  (although e1000
is also a 2-line change)

Link: https://lkml.kernel.org/r/20210411055335.7111-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Guo Ren <guoren@kernel.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kasan: fix hwasan build for gcc

[ Upstream commit 5c595ac4c776c44b5c59de22ab43b3fe256d9fbb ]

gcc-11 adds support for -fsanitize=kernel-hwaddress, so it becomes
possible to enable CONFIG_KASAN_SW_TAGS.

Unfortunately this fails to build at the moment, because the
corresponding command line arguments use llvm specific syntax.

Change it to use the cc-param macro instead, which works on both clang
and gcc.

[elver@google.com: fixup for "kasan: fix hwasan build for gcc"]
Link: https://lkml.kernel.org/r/YHQZVfVVLE/LDK2v@elver.google.com
Link: https://lkml.kernel.org/r/20210323124112.1229772-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cavium/liquidio: Fix duplicate argument

[ Upstream commit 416dcc5ce9d2a810477171c62ffa061a98f87367 ]

Fix the following coccicheck warning:

./drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h:413:6-28:
duplicated argument to & or |

The CN6XXX_INTR_M1UPB0_ERR here is duplicate.
Here should be CN6XXX_INTR_M1UNB0_ERR.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen-netback: Check for hotplug-status existence before watching

[ Upstream commit 2afeec08ab5c86ae21952151f726bfe184f6b23d ]

The logic in connect() is currently written with the assumption that
xenbus_watch_pathfmt() will return an error for a node that does not
exist.  This assumption is incorrect: xenstore does allow a watch to
be registered for a nonexistent node (and will send notifications
should the node be subsequently created).

As of commit 1f2565780 ("xen-netback: remove 'hotplug-status' once it
has served its purpose"), this leads to a failure when a domU
transitions into XenbusStateConnected more than once.  On the first
domU transition into Connected state, the "hotplug-status" node will
be deleted by the hotplug_status_changed() callback in dom0.  On the
second or subsequent domU transition into Connected state, the
hotplug_status_changed() callback will therefore never be invoked, and
so the backend will remain stuck in InitWait.

This failure prevents scenarios such as reloading the xen-netfront
module within a domU, or booting a domU via iPXE.  There is
unfortunately no way for the domU to work around this dom0 bug.

Fix by explicitly checking for existence of the "hotplug-status" node,
thereby creating the behaviour that was previously assumed to exist.

Signed-off-by: Michael Brown <mbrown@fensystems.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: kprobes: Restore local irqflag if kprobes is cancelled

[ Upstream commit 738fa58ee1328481d1d7889e7c430b3401c571b9 ]

If instruction being single stepped caused a page fault, the kprobes
is cancelled to let the page fault handler continue as a normal page
fault. But the local irqflags are disabled so cpu will restore pstate
with DAIF masked. After pagefault is serviced, the kprobes is
triggerred again, we overwrite the saved_irqflag by calling
kprobes_save_local_irqflag(). NOTE, DAIF is masked in this new saved
irqflag. After kprobes is serviced, the cpu pstate is retored with
DAIF masked.

This patch is inspired by one patch for riscv from Liao Chang.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210412174101.6bfb0594@xhacker.debian
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/entry: save the caller of psw_idle

[ Upstream commit a994eddb947ea9ebb7b14d9a1267001699f0a136 ]

Currently psw_idle does not allocate a stack frame and does not
save its r14 and r15 into the save area. Even though this is valid from
call ABI point of view, because psw_idle does not make any calls
explicitly, in reality psw_idle is an entry point for controlled
transition into serving interrupts. So, in practice, psw_idle stack
frame is analyzed during stack unwinding. Depending on build options
that r14 slot in the save area of psw_idle might either contain a value
saved by previous sibling call or complete garbage.

  [task    0000038000003c28] do_ext_irq+0xd6/0x160
  [task    0000038000003c78] ext_int_handler+0xba/0xe8
  [task   *0000038000003dd8] psw_idle_exit+0x0/0x8 <-- pt_regs
 ([task    0000038000003dd8] 0x0)
  [task    0000038000003e10] default_idle_call+0x42/0x148
  [task    0000038000003e30] do_idle+0xce/0x160
  [task    0000038000003e70] cpu_startup_entry+0x36/0x40
  [task    0000038000003ea0] arch_call_rest_init+0x76/0x80

So, to make a stacktrace nicer and actually point for the real caller of
psw_idle in this frequently occurring case, make psw_idle save its r14.

  [task    0000038000003c28] do_ext_irq+0xd6/0x160
  [task    0000038000003c78] ext_int_handler+0xba/0xe8
  [task   *0000038000003dd8] psw_idle_exit+0x0/0x6 <-- pt_regs
 ([task    0000038000003dd8] arch_cpu_idle+0x3c/0xd0)
  [task    0000038000003e10] default_idle_call+0x42/0x148
  [task    0000038000003e30] do_idle+0xce/0x160
  [task    0000038000003e70] cpu_startup_entry+0x36/0x40
  [task    0000038000003ea0] arch_call_rest_init+0x76/0x80

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: tegra20: Fix runtime PM imbalance on error

[ Upstream commit 917a3200b9f467a154999c7572af345f2470aaf4 ]

pm_runtime_get_sync() will increase the runtime PM counter
even it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210409082805.23643-1-dinghao.liu@zju.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: geneve: check skb is large enough for IPv4/IPv6 header

[ Upstream commit 6628ddfec7580882f11fdc5c194a8ea781fdadfa ]

Check within geneve_xmit_skb/geneve6_xmit_skb that sk_buff structure
is large enough to include IPv4 or IPv6 header, and reject if not. The
geneve_xmit_skb portion and overall idea was contributed by Eric Dumazet.
Fixes a KMSAN-found uninit-value bug reported by syzbot at:
https://syzkaller.appspot.com/bug?id=abe95dc3e3e9667fc23b8d81f29ecad95c6f106f

Suggested-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+2e406a9ac75bb71d4b7a@syzkaller.appspotmail.com
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Fix swapped mmc order for omap3

[ Upstream commit a1ebdb3741993f853865d1bd8f77881916ad53a7 ]

Also some omap3 devices like n900 seem to have eMMC and micro-sd swapped
around with commit 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for
drivers that existed in v4.4").

Let's fix the issue with aliases as discussed on the mailing lists. While
the mmc aliases should be board specific, let's first fix the issue with
minimal changes.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: xilinx: dpdma: Fix race condition in done IRQ

[ Upstream commit 868833fbffbe51c487df4f95d4de9194264a4b30 ]

The active descriptor pointer is accessed from different contexts,
including different interrupt handlers, and its access must be protected
by the channel's lock. This wasn't done in the done IRQ handler. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210307040629.29308-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: xilinx: dpdma: Fix descriptor issuing on video group

[ Upstream commit 1cbd44666216278bbb6a55bcb6b9283702171c77 ]

When multiple channels are part of a video group, the transfer is
triggered only when all channels in the group are ready. The logic to do
so is incorrect, as it causes the descriptors for all channels but the
last one in a group to not being pushed to the hardware. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210307040629.29308-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: geni: shield geni_icc_get() for ACPI boot

[ Upstream commit 0c9fdcdba68208270ae85d39600ea97da1718344 ]

Currently, GENI devices like i2c-qcom-geni fails to probe in ACPI boot,
if interconnect support is enabled.  That's because interconnect driver
only supports DT right now.  As interconnect is not necessarily required
for basic function of GENI devices, let's shield geni_icc_get() call,
and then all other ICC calls become nop due to NULL icc_path, so that
GENI devices keep working for ACPI boot.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210114112928.11368-1-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: wacom: Assign boolean values to a bool variable

[ Upstream commit e29c62ffb008829dc8bcc0a2ec438adc25a8255e ]

Fix the following coccicheck warnings:

./drivers/hid/wacom_wac.c:2536:2-6: WARNING: Assignment of
0/1 to bool variable.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID cp2112: fix support for multiple gpiochips

[ Upstream commit 2a2b09c867fdac63f430a45051e7bd0c46edc381 ]

In lk 5.11.0-rc2 connecting a USB based Silicon Labs HID to I2C
bridge evaluation board (CP2112EK) causes this warning:
  gpio gpiochip0: (cp2112_gpio): detected irqchip that is shared
       with multiple gpiochips: please fix the driver

Simply copy what other gpio related drivers do to fix this
particular warning: replicate the struct irq_chip object in each
device instance rather than have a static object which makes that
object (incorrectly) shared by each device.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: alps: fix error return code in alps_input_configured()

[ Upstream commit fa8ba6e5dc0e78e409e503ddcfceef5dd96527f4 ]

When input_register_device() fails, no error return code is assigned.
To fix this bug, ret is assigned with -ENOENT as error return code.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: google: add don USB id

[ Upstream commit 36b87cf302a4f13f8b4344bcf98f67405a145e2f ]

Add 1 additional hammer-like device.

Signed-off-by: Shou-Chieh Hsu <shouchieh@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf map: Fix error return code in maps__clone()

[ Upstream commit c6f87141254d16e281e4b4431af7316895207b8f ]

Although 'err' has been initialized to -ENOMEM, but it will be reassigned
by the "err = unwind__prepare_access(...)" statement in the for loop. So
that, the value of 'err' is unknown when map__clone() failed.

Fixes: 6c502584438bda63 ("perf unwind: Call unwind__prepare_access for forked thread")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: zhen lei <thunder.leizhen@huawei.com>
Link: http://lore.kernel.org/lkml/20210415092744.3793-1-thunder.leizhen@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf auxtrace: Fix potential NULL pointer dereference

[ Upstream commit b14585d9f18dc617e975815570fe836be656b1da ]

In the function auxtrace_parse_snapshot_options(), the callback pointer
"itr->parse_snapshot_options" can be NULL if it has not been set during
the AUX record initialization.  This can cause tool crashing if the
callback pointer "itr->parse_snapshot_options" is dereferenced without
performing NULL check.

Add a NULL check for the pointer "itr->parse_snapshot_options" before
invoke the callback.

Fixes: d20031bb63dd6dde ("perf tools: Add AUX area tracing Snapshot Mode")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: http://lore.kernel.org/lkml/20210420151554.2031768-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]

[ Upstream commit 4b2f1e59229b9da319d358828cdfa4ddbc140769 ]

The only stepping of Broadwell Xeon parts is stepping 1. Fix the
relevant isolation_ucodes[] entry, which previously enumerated
stepping 2.

Although the original commit was characterized as an optimization, it
is also a workaround for a correctness issue.

If a PMI arrives between kvm's call to perf_guest_get_msrs() and the
subsequent VM-entry, a stale value for the IA32_PEBS_ENABLE MSR may be
restored at the next VM-exit. This is because, unbeknownst to kvm, PMI
throttling may clear bits in the IA32_PEBS_ENABLE MSR. CPUs with "PEBS
isolation" don't suffer from this issue, because perf_guest_get_msrs()
doesn't report the IA32_PEBS_ENABLE value.

Fixes: 9b545c04abd4f ("perf/x86/kvm: Avoid unnecessary work in guest filtering")
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Peter Shier <pshier@google.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/20210422001834.1748319-1-jmattson@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3

[ Upstream commit 9d480158ee86ad606d3a8baaf81e6b71acbfd7d5 ]

There may be a kernel panic on the Haswell server and the Broadwell
server, if the snbep_pci2phy_map_init() return error.

The uncore_extra_pci_dev[HSWEP_PCI_PCU_3] is used in the cpu_init() to
detect the existence of the SBOX, which is a MSR type of PMON unit.
The uncore_extra_pci_dev is allocated in the uncore_pci_init(). If the
snbep_pci2phy_map_init() returns error, perf doesn't initialize the
PCI type of the PMON units, so the uncore_extra_pci_dev will not be
allocated. But perf may continue initializing the MSR type of PMON
units. A null dereference kernel panic will be triggered.

The sockets in a Haswell server or a Broadwell server are identical.
Only need to detect the existence of the SBOX once.
Current perf probes all available PCU devices and stores them into the
uncore_extra_pci_dev. It's unnecessary.
Use the pci_get_device() to replace the uncore_extra_pci_dev. Only
detect the existence of the SBOX on the first available PCU device once.

Factor out hswep_has_limit_sbox(), since the Haswell server and the
Broadwell server uses the same way to detect the existence of the SBOX.

Add some macros to replace the magic number.

Fixes: 5306c31c5733 ("perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes")
Reported-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lkml.kernel.org/r/1618521764-100923-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

locking/qrwlock: Fix ordering in queued_write_lock_slowpath()

[ Upstream commit 84a24bf8c52e66b7ac89ada5e3cfbe72d65c1896 ]

While this code is executed with the wait_lock held, a reader can
acquire the lock without holding wait_lock.  The writer side loops
checking the value with the atomic_cond_read_acquire(), but only truly
acquires the lock when the compare-and-exchange is completed
successfully which isn’t ordered. This exposes the window between the
acquire and the cmpxchg to an A-B-A problem which allows reads
following the lock acquisition to observe values speculatively before
the write lock is truly acquired.

We've seen a problem in epoll where the reader does a xchg while
holding the read lock, but the writer can see a value change out from
under it.

  Writer                                | Reader
  --------------------------------------------------------------------------------
  ep_scan_ready_list()                  |
  |- write_lock_irq()                   |
      |- queued_write_lock_slowpath()   |
|- atomic_cond_read_acquire()   |
        | read_lock_irqsave(&ep->lock, flags);
     --> (observes value before unlock) |  chain_epi_lockless()
     |                                  |    epi->next = xchg(&ep->ovflist, epi);
     |                                  | read_unlock_irqrestore(&ep->lock, flags);
     |                                  |
     |     atomic_cmpxchg_relaxed()     |
     |-- READ_ONCE(ep->ovflist);        |

A core can order the read of the ovflist ahead of the
atomic_cmpxchg_relaxed(). Switching the cmpxchg to use acquire
semantics addresses this issue at which point the atomic_cond_read can
be switched to use relaxed semantics.

Fixes: b519b56e378ee ("locking/qrwlock: Use atomic_cond_read_acquire() when spinning in qrwlock")
Signed-off-by: Ali Saidi <alisaidi@amazon.com>
[peterz: use try_cmpxchg()]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Tighten speculative pointer arithmetic mask

[ Upstream commit 7fedb63a8307dda0ec3b8969a3b233a1dd7ea8e0 ]

This work tightens the offset mask we use for unprivileged pointer arithmetic
in order to mitigate a corner case reported by Piotr and Benedict where in
the speculative domain it is possible to advance, for example, the map value
pointer by up to value_size-1 out-of-bounds in order to leak kernel memory
via side-channel to user space.

Before this change, the computed ptr_limit for retrieve_ptr_limit() helper
represents largest valid distance when moving pointer to the right or left
which is then fed as aux->alu_limit to generate masking instructions against
the offset register. After the change, the derived aux->alu_limit represents
the largest potential value of the offset register which we mask against which
is just a narrower subset of the former limit.

For minimal complexity, we call sanitize_ptr_alu() from 2 observation points
in adjust_ptr_min_max_vals(), that is, before and after the simulated alu
operation. In the first step, we retieve the alu_state and alu_limit before
the operation as well as we branch-off a verifier path and push it to the
verification stack as we did before which checks the dst_reg under truncation,
in other words, when the speculative domain would attempt to move the pointer
out-of-bounds.

In the second step, we retrieve the new alu_limit and calculate the absolute
distance between both. Moreover, we commit the alu_state and final alu_limit
via update_alu_sanitation_state() to the env's instruction aux data, and bail
out from there if there is a mismatch due to coming from different verification
paths with different states.

Reported-by: Piotr Krysiuk <piotras@gmail.com>
Reported-by: Benedict Schlueter <benedict.schlueter@rub.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Benedict Schlueter <benedict.schlueter@rub.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Refactor and streamline bounds check into helper

[ Upstream commit 073815b756c51ba9d8384d924c5d1c03ca3d1ae4 ]

Move the bounds check in adjust_ptr_min_max_vals() into a small helper named
sanitize_check_bounds() in order to simplify the former a bit.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Allow variable-offset stack access

[ Upstream commit 01f810ace9ed37255f27608a0864abebccf0aab3 ]

Before this patch, variable offset access to the stack was dissalowed
for regular instructions, but was allowed for "indirect" accesses (i.e.
helpers). This patch removes the restriction, allowing reading and
writing to the stack through stack pointers with variable offsets. This
makes stack-allocated buffers more usable in programs, and brings stack
pointers closer to other types of pointers.

The motivation is being able to use stack-allocated buffers for data
manipulation. When the stack size limit is sufficient, allocating
buffers on the stack is simpler than per-cpu arrays, or other
alternatives.

In unpriviledged programs, variable-offset reads and writes are
disallowed (they were already disallowed for the indirect access case)
because the speculative execution checking code doesn't support them.
Additionally, when writing through a variable-offset stack pointer, if
any pointers are in the accessible range, there's possilibities of later
leaking pointers because the write cannot be tracked precisely.

Writes with variable offset mark the whole range as initialized, even
though we don't know which stack slots are actually written. This is in
order to not reject future reads to these slots. Note that this doesn't
affect writes done through helpers; like before, helpers need the whole
stack range to be initialized to begin with.
All the stack slots are in range are considered scalars after the write;
variable-offset register spills are not tracked.

For reads, all the stack slots in the variable range needs to be
initialized (but see above about what writes do), otherwise the read is
rejected. All register spilled in stack slots that might be read are
marked as having been read, however reads through such pointers don't do
register filling; the target register will always be either a scalar or
a constant zero.

Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210207011027.676572-2-andreimatei1@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Permits pointers on stack for helper calls

[ Upstream commit cd17d38f8b28f808c368121041c0a4fa91757e0d ]

Currently, when checking stack memory accessed by helper calls,
for spills, only PTR_TO_BTF_ID and SCALAR_VALUE are
allowed.

Song discovered an issue where the below bpf program
  int dump_task(struct bpf_iter__task *ctx)
  {
    struct seq_file *seq = ctx->meta->seq;
    static char[] info = "abc";
    BPF_SEQ_PRINTF(seq, "%s\n", info);
    return 0;
  }
may cause a verifier failure.

The verifier output looks like:
  ; struct seq_file *seq = ctx->meta->seq;
  1: (79) r1 = *(u64 *)(r1 +0)
  ; BPF_SEQ_PRINTF(seq, "%s\n", info);
  2: (18) r2 = 0xffff9054400f6000
  4: (7b) *(u64 *)(r10 -8) = r2
  5: (bf) r4 = r10
  ;
  6: (07) r4 += -8
  ; BPF_SEQ_PRINTF(seq, "%s\n", info);
  7: (18) r2 = 0xffff9054400fe000
  9: (b4) w3 = 4
  10: (b4) w5 = 8
  11: (85) call bpf_seq_printf#126
   R1_w=ptr_seq_file(id=0,off=0,imm=0) R2_w=map_value(id=0,off=0,ks=4,vs=4,imm=0)
  R3_w=inv4 R4_w=fp-8 R5_w=inv8 R10=fp0 fp-8_w=map_value
  last_idx 11 first_idx 0
  regs=8 stack=0 before 10: (b4) w5 = 8
  regs=8 stack=0 before 9: (b4) w3 = 4
  invalid indirect read from stack off -8+0 size 8

Basically, the verifier complains the map_value pointer at "fp-8" location.
To fix the issue, if env->allow_ptr_leaks is true, let us also permit
pointers on the stack to be accessible by the helper.

Reported-by: Song Liu <songliubraving@fb.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201210013349.943719-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS

[ Upstream commit 4d09ccc4a81e7de6b002482af554d8b5626f5041 ]

Commit 941432d00768 ("arm64: dts: allwinner: Drop non-removable from
SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module,
along the way with the Pine64-LTS, which share the same base .dtsi.

This was based on the observation that the Pine64-LTS has as "push-push"
SD card socket, and that the schematic mentions the card detect GPIO.

After having received two reports about failing SD card access with that
patch, some more research and polls on that subject revealed that there
are at least two different versions of the Pine64-LTS out there:
- On some boards (including mine) the card detect pin is "stuck" at
  high, regardless of an microSD card being inserted or not.
- On other boards the card-detect is working, but is active-high, by
  virtue of an explicit inverter circuit, as shown in the schematic.

To cover all versions of the board out there, and don't take any chances,
let's revert the introduction of the active-low CD GPIO, but let's use
the broken-cd property for the Pine64-LTS this time. That should avoid
regressions and should work for everyone, even allowing SD card changes
now.
The SOPine card detect has proven to be working, so let's keep that
GPIO in place.

Fixes: 941432d00768 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card")
Reported-by: Michael Weiser <michael.weiser@gmx.de>
Reported-by: Daniel Kulesz <kuleszdl@posteo.org>
Suggested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Michael Weiser <michael.weiser@gmx.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210414104740.31497-1-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: core: Show pin numbers for the controllers with base = 0

[ Upstream commit 482715ff0601c836152b792f06c353464d826b9b ]

The commit f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file")
enabled GPIO pin number and label in debugfs for pin controller. However,
it limited that feature to the chips where base is positive number. This,
in particular, excluded chips where base is 0 for the historical or backward
compatibility reasons. Refactor the code to include the latter as well.

Fixes: f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file")
Cc: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Drew Fustini <drew@beagleboard.org>
Reviewed-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210415130356.15885-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: return -EBUSY when there are open partitions in blkdev_reread_part

[ Upstream commit 68e6582e8f2dc32fd2458b9926564faa1fb4560e ]

The switch to go through blkdev_get_by_dev means we now ignore the
return value from bdev_disk_changed in __blkdev_get.  Add a manual
check to restore the old semantics.

Fixes: 4601b4b130de ("block: reopen the device in blkdev_reread_part")
Reported-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210421160502.447418-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: lewisburg: Update number of pins in community

[ Upstream commit 196d941753297d0ca73c563ccd7d00be049ec226 ]

When updating pin names for Intel Lewisburg, the numbers of pins were
left behind. Update them accordingly.

Fixes: e66ff71fd0db ("pinctrl: lewisburg: Update pin list according to v1.1v6")
Signed-off-by: Yuanyuan Zhong <yzhong@purestorage.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails

[ Upstream commit be286f84e33da1a7f83142b64dbd86f600e73363 ]

Set err = -ENOMEM if dma_map_sg_attrs() fails so the function reutrns
error.

Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210411083646.910546-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KEYS: trusted: Fix TPM reservation for seal/unseal

[ Upstream commit 9d5171eab462a63e2fbebfccf6026e92be018f20 ]

The original patch 8c657a0590de ("KEYS: trusted: Reserve TPM for seal
and unseal operations") was correct on the mailing list:

https://lore.kernel.org/linux-integrity/20210128235621.127925-4-jarkko@kernel.org/

But somehow got rebased so that the tpm_try_get_ops() in
tpm2_seal_trusted() got lost.  This causes an imbalanced put of the
TPM ops and causes oopses on TIS based hardware.

This fix puts back the lost tpm_try_get_ops()

Fixes: 8c657a0590de ("KEYS: trusted: Reserve TPM for seal and unseal operations")
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: omap: Save and restore sysconfig

[ Upstream commit ddd8d94ca31e768c76cf8bfe34ba7b10136b3694 ]

As we are using cpu_pm to save and restore context, we must also save and
restore the GPIO sysconfig register. This is needed because we are not
calling PM runtime functions at all with cpu_pm.

We need to save the sysconfig on idle as it's value can get reconfigured by
PM runtime and can be different from the init time value. Device specific
flags like "ti,no-idle-on-init" can affect the init value.

Fixes: b764a5863fd8 ("gpio: omap: Remove custom PM calls and use cpu_pm instead")
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vhost-vdpa: protect concurrent access to vhost device iotlb

commit a9d064524fc3cf463b3bb14fa63de78aafb40dab upstream.

Protect vhost device iotlb by vhost_dev->mutex. Otherwise,
it might cause corruption of the list and interval tree in
struct vhost_iotlb if userspace sends the VHOST_IOTLB_MSG_V2
message concurrently.

Fixes: 4c8cf318("vhost: introduce vDPA-based backend")
Cc: stable@vger.kernel.org
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210412095512.178-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.32

Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-By: Patrick McCormick <pmccormick@digitalocean.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Andrei Rabusov <a.rabusov@tum.de>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Link: https://lore.kernel.org/r/20210419130527.791982064@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: marvell: fix detection of PHY on Topaz switches

commit 1fe976d308acb6374c899a4ee8025a0a016e453e upstream.

Since commit fee2d546414d ("net: phy: marvell: mv88e6390 temperature
sensor reading"), Linux reports the temperature of Topaz hwmon as
constant -75°C.

This is because switches from the Topaz family (88E6141 / 88E6341) have
the address of the temperature sensor register different from Peridot.

This address is instead compatible with 88E1510 PHYs, as was used for
Topaz before the above mentioned commit.

Create a new mapping table between switch family and PHY ID for families
which don't have a model number. And define PHY IDs for Topaz and Peridot
families.

Create a new PHY ID and a new PHY driver for Topaz's internal PHY.
The only difference from Peridot's PHY driver is the HWMON probing
method.

Prior this change Topaz's internal PHY is detected by kernel as:

  PHY [...] driver [Marvell 88E6390] (irq=63)

And afterwards as:

  PHY [...] driver [Marvell 88E6341 Family] (irq=63)

Signed-off-by: Pali Rohár <pali@kernel.org>
BugLink: https://github.com/globalscaletechnologies/linux/issues/1
Fixes: fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading")
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Move sanitize_val_alu out of op switch

commit f528819334881fd622fdadeddb3f7edaed8b7c9b upstream.

Add a small sanitize_needed() helper function and move sanitize_val_alu()
out of the main opcode switch. In upcoming work, we'll move sanitize_ptr_alu()
as well out of its opcode switch so this helps to streamline both.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Improve verifier error messages for users

commit a6aaece00a57fa6f22575364b3903dfbccf5345d upstream.

Consolidate all error handling and provide more user-friendly error messages
from sanitize_ptr_alu() and sanitize_val_alu().

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Rework ptr_limit into alu_limit and add common error path

commit b658bbb844e28f1862867f37e8ca11a8e2aa94a3 upstream.

Small refactor with no semantic changes in order to consolidate the max
ptr_limit boundary check.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mte: Ensure TIF_MTE_ASYNC_FAULT is set atomically

commit 2decad92f4731fac9755a083fcfefa66edb7d67d upstream.

The entry from EL0 code checks the TFSRE0_EL1 register for any
asynchronous tag check faults in user space and sets the
TIF_MTE_ASYNC_FAULT flag. This is not done atomically, potentially
racing with another CPU calling set_tsk_thread_flag().

Replace the non-atomic ORR+STR with an STSET instruction. While STSET
requires ARMv8.1 and an assembler that understands LSE atomics, the MTE
feature is part of ARMv8.5 and already requires an updated assembler.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 637ec831ea4f ("arm64: mte: Handle synchronous and asynchronous tag check faults")
Cc: <stable@vger.kernel.org> # 5.10.x
Reported-by: Will Deacon <will@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210409173710.18582-1-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9071/1: uprobes: Don't hook on thumb instructions

commit d2f7eca60b29006285d57c7035539e33300e89e5 upstream.

Since uprobes is not supported for thumb, check that the thumb bit is
not set when matching the uprobes instruction hooks.

The Arm UDF instructions used for uprobes triggering
(UPROBE_SWBP_ARM_INSN and UPROBE_SS_ARM_INSN) coincidentally share the
same encoding as a pair of unallocated 32-bit thumb instructions (not
UDF) when the condition code is 0b1111 (0xf). This in effect makes it
possible to trigger the uprobes functionality from thumb, and at that
using two unallocated instructions which are not permanently undefined.

Signed-off-by: Fredrik Strupe <fredrik@strupe.net>
Cc: stable@vger.kernel.org
Fixes: c7edc9e326d5 ("ARM: add uprobes support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Move off_reg into sanitize_ptr_alu

[ Upstream commit 6f55b2f2a1178856c19bbce2f71449926e731914 ]

Small refactor to drag off_reg into sanitize_ptr_alu(), so we later on can
use off_reg for generalizing some of the checks for all pointer types.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Ensure off_reg has no mixed signed bounds for all types

[ Upstream commit 24c109bb1537c12c02aeed2d51a347b4d6a9b76e ]

The mixed signed bounds check really belongs into retrieve_ptr_limit()
instead of outside of it in adjust_ptr_min_max_vals(). The reason is
that this check is not tied to PTR_TO_MAP_VALUE only, but to all pointer
types that we handle in retrieve_ptr_limit() and given errors from the latter
propagate back to adjust_ptr_min_max_vals() and lead to rejection of the
program, it's a better place to reside to avoid anything slipping through
for future types. The reason why we must reject such off_reg is that we
otherwise would not be able to derive a mask, see details in 9d7eceede769
("bpf: restrict unknown scalars of mixed signed bounds for unprivileged").

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8169: don't advertise pause in jumbo mode

[ Upstream commit 453a77894efa4d9b6ef9644d74b9419c47ac427c ]

It has been reported [0] that using pause frames in jumbo mode impacts
performance. There's no available chip documentation, but vendor
drivers r8168 and r8125 don't advertise pause in jumbo mode. So let's
do the same, according to Roman it fixes the issue.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=212617

Fixes: 9cf9b84cc701 ("r8169: make use of phy_set_asym_pause")
Reported-by: Roman Mamedov <rm+bko@romanrm.net>
Tested-by: Roman Mamedov <rm+bko@romanrm.net>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8169: tweak max read request size for newer chips also in jumbo mtu mode

[ Upstream commit 5e00e16cb98935bcf06f51931876d898c226f65c ]

So far we don't increase the max read request size if we switch to
jumbo mode before bringing up the interface for the first time.
Let's change this.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: VMX: Don't use vcpu->run->internal.ndata as an array index

[ Upstream commit 04c4f2ee3f68c9a4bf1653d15f1a9a435ae33f7a ]

__vmx_handle_exit() uses vcpu->run->internal.ndata as an index for
an array access.  Since vcpu->run is (can be) mapped to a user address
space with a writer permission, the 'ndata' could be updated by the
user process at anytime (the user process can set it to outside the
bounds of the array).
So, it is not safe that __vmx_handle_exit() uses the 'ndata' that way.

Fixes: 1aa561b1a4c0 ("kvm: x86: Add "last CPU" to some KVM_EXIT information")
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210413154739.490299-1-reijiw@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: VMX: Convert vcpu_vmx.exit_reason to a union

[ Upstream commit 8e53324021645f820a01bf8aa745711c802c8542 ]

Convert vcpu_vmx.exit_reason from a u32 to a union (of size u32).  The
full VM_EXIT_REASON field is comprised of a 16-bit basic exit reason in
bits 15:0, and single-bit modifiers in bits 31:16.

Historically, KVM has only had to worry about handling the "failed
VM-Entry" modifier, which could only be set in very specific flows and
required dedicated handling.  I.e. manually stripping the FAILED_VMENTRY
bit was a somewhat viable approach.  But even with only a single bit to
worry about, KVM has had several bugs related to comparing a basic exit
reason against the full exit reason store in vcpu_vmx.

Upcoming Intel features, e.g. SGX, will add new modifier bits that can
be set on more or less any VM-Exit, as opposed to the significantly more
restricted FAILED_VMENTRY, i.e. correctly handling everything in one-off
flows isn't scalable.  Tracking exit reason in a union forces code to
explicitly choose between consuming the full exit reason and the basic
exit, and is a convenient way to document and access the modifiers.

No functional change intended.

Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20201106090315.18606-2-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Use correct permission flag for mixed signed bounds arithmetic

[ Upstream commit 9601148392520e2e134936e76788fc2a6371e7be ]

We forbid adding unknown scalars with mixed signed bounds due to the
spectre v1 masking mitigation. Hence this also needs bypass_spec_v1
flag instead of allow_ptr_leaks.

Fixes: 2c78ee898d8f ("bpf: Implement CAP_BPF")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference

[ Upstream commit 7a2f6e69e9c1060a7a09c1f8322ccb8d942b3078 ]

Although every Beelink GS1 seems to have external 32768 Hz oscillator,
it works only on one from four tested. There are more reports of RTC
issues elsewhere, like Armbian forum.

One Beelink GS1 owner read RTC osc status register on Android which
shipped with the box. Reported value indicated problems with external
oscillator.

In order to fix RTC and related issues (HDMI-CEC and suspend/resume with
Crust) on all boards, switch to internal oscillator.

Fixes: 32507b868119 ("arm64: dts: allwinner: h6: Move ext. oscillator to board DTs")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210330184218.279738-1-jernej.skrabec@siol.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems

[ Upstream commit 3dd4ce4185df6798dcdcc3669bddb35899d7d5e1 ]

Commit 941432d00768 ("arm64: dts: allwinner: Drop non-removable from
SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module,
along the way with the Pine64-LTS, which share the same base .dtsi.

However while both boards indeed have a working CD GPIO on PF6, the
polarity is different: the SOPine modules uses a "push-pull" socket,
which has an active-high switch, while the Pine64-LTS use the more
traditional push-push socket and the common active-low switch.

Fix the polarity in the sopine.dtsi, and overwrite it in the LTS
board .dts, to make the SD card work again on systems using SOPine
modules.

Fixes: 941432d00768 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card")
Reported-by: Ashley <contact@victorianfox.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210316144219.5973-1-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP2+: Fix uninitialized sr_inst

[ Upstream commit fc85dc42a38405099f97aa2af709fe9504a82508 ]

Fix uninitialized sr_inst.

Fixes: fbfa463be8dc ("ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: footbridge: fix PCI interrupt mapping

[ Upstream commit 30e3b4f256b4e366a61658c294f6a21b8626dda7 ]

Since commit 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in
pci_device_probe()"), the PCI code will call the IRQ mapping function
whenever a PCI driver is probed. If these are marked as __init, this
causes an oops if a PCI driver is loaded or bound after the kernel has
initialised.

Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9069/1: NOMMU: Fix conversion for_each_membock() to for_each_mem_range()

[ Upstream commit 45c2f70cba3a7eff34574103b2e2b901a5f771aa ]

for_each_mem_range() uses a loop variable, yet looking into code it is
not just iteration counter but more complex entity which encodes
information about memblock. Thus condition i == 0 looks fragile.
Indeed, it broke boot of R-class platforms since it never took i == 0
path (due to i was set to 1). Fix that with restoring original flag
check.

Fixes: b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP2+: Fix warning for omap_init_time_of()

[ Upstream commit a3efe3f6d0eb64363f74af4b0e8ba6d19415cef2 ]

Fix warning: no previous prototype for 'omap_init_time_of'.

Fixes: e69b4e1a7577 ("ARM: OMAP2+: Add omap_init_time_of()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gro: ensure frag0 meets IP header alignment

commit 38ec4944b593fd90c5ef42aaaa53e66ae5769d04 upstream.

After commit 0f6925b3e8da ("virtio_net: Do not pull payload in skb->head")
Guenter Roeck reported one failure in his tests using sh architecture.

After much debugging, we have been able to spot silent unaligned accesses
in inet_gro_receive()

The issue at hand is that upper networking stacks assume their header
is word-aligned. Low level drivers are supposed to reserve NET_IP_ALIGN
bytes before the Ethernet header to make that happen.

This patch hardens skb_gro_reset_offset() to not allow frag0 fast-path
if the fragment is not properly aligned.

Some arches like x86, arm64 and powerpc do not care and define NET_IP_ALIGN
as 0, this extra check will be a NOP for them.

Note that if frag0 is not used, GRO will call pskb_may_pull()
as many times as needed to pull network and transport headers.

Fixes: 0f6925b3e8da ("virtio_net: Do not pull payload in skb->head")
Fixes: 78a478d0efd9 ("gro: Inline skb_gro_header and cache frag0 virtual address")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ch_ktls: do not send snd_una update to TCB in middle

commit e8a4155567b3c903f49cbf89b8017e9cc22c4fe4 upstream.

snd_una update should not be done when the same skb is being
sent out.chcr_short_record_handler() sends it again even
though SND_UNA update is already sent for the skb in
chcr_ktls_xmit(), which causes mismatch in un-acked
TCP seq number, later causes problem in sending out
complete record.

Fixes: 429765a149f1 ("chcr: handle partial end part of a record")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ch_ktls: tcb close causes tls connection failure

commit 21d8c25e3f4b9052a471ced8f47b531956eb9963 upstream.

HW doesn't need marking TCB closed. This TCB state change
sometimes causes problem to the new connection which gets
the same tid.

Fixes: 34aba2c45024 ("cxgb4/chcr : Register to tls add and del callback")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ch_ktls: fix device connection close

commit bc16efd2430652f894ae34b1de5eccc3bf0d2810 upstream.

When sge queue is full and chcr_ktls_xmit_wr_complete()
returns failure, skb is not freed if it is not the last tls record in
this skb, causes refcount never gets freed and tls_dev_del()
never gets called on this connection.

Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ch_ktls: Fix kernel panic

commit 1a73e427b824133940c2dd95ebe26b6dce1cbf10 upstream.

Taking page refcount is not ideal and causes kernel panic
sometimes. It's better to take tx_ctx lock for the complete
skb transmit, to avoid page cleanup if ACK received in middle.

Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvnic: remove duplicate napi_schedule call in open function

commit 7c451f3ef676c805a4b77a743a01a5c21a250a73 upstream.

Remove the unnecessary napi_schedule() call in __ibmvnic_open() since
interrupt_rx() calls napi_schedule_prep/__napi_schedule during every
receive interrupt.

Fixes: ed651a10875f ("ibmvnic: Updated reset handling")
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvnic: remove duplicate napi_schedule call in do_reset function

commit d3a6abccbd272aea7dc2c6f984bb5a2c11278e44 upstream.

During adapter reset, do_reset/do_hard_reset calls ibmvnic_open(),
which will calls napi_schedule if previous state is VNIC_CLOSED
(i.e, the reset case, and "ifconfig down" case). So there is no need
for do_reset to call napi_schedule again at the end of the function
though napi_schedule will neglect the request if napi is already
scheduled.

Fixes: ed651a10875f ("ibmvnic: Updated reset handling")
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvnic: avoid calling napi_disable() twice

commit 0775ebc4cf8554bdcd2c212669a0868ab68df5c0 upstream.

__ibmvnic_open calls napi_disable without checking whether NAPI polling
has already been disabled or not. This could cause napi_disable
being called twice, which could generate deadlock. For example,
the first napi_disable will spin until NAPI_STATE_SCHED is cleared
by napi_complete_done, then set it again.
When napi_disable is called the second time, it will loop infinitely
because no dev->poll will be running to clear NAPI_STATE_SCHED.

To prevent above scenario from happening, call ibmvnic_napi_disable()
which checks if napi is disabled or not before calling napi_disable.

Fixes: bfc32f297337 ("ibmvnic: Move resource initialization to its own routine")
Suggested-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ia64: tools: remove inclusion of ia64-specific version of errno.h header

commit 17786fea414393813b56e33a1a01b2dfa03c0915 upstream.

There is no longer an ia64-specific version of the errno.h header below
arch/ia64/include/uapi/asm/, so trying to build tools/bpf fails with:

    CC       /usr/src/linux/tools/bpf/bpftool/btf_dumper.o
  In file included from /usr/src/linux/tools/include/linux/err.h:8,
                   from btf_dumper.c:11:
  /usr/src/linux/tools/include/uapi/asm/errno.h:13:10: fatal error: ../../../arch/ia64/include/uapi/asm/errno.h: No such file or directory
     13 | #include "../../../arch/ia64/include/uapi/asm/errno.h"
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  compilation terminated.

Thus, just remove the inclusion of the ia64-specific errno.h so that the
build will use the generic errno.h header on this target which was used
there anyway as the ia64-specific errno.h was just a wrapper for the
generic header.

Fixes: c25f867ddd00 ("ia64: remove unneeded uapi asm-generic wrappers")
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ia64: remove duplicate entries in generic_defconfig

commit 19d000d93303e05bd7b1326e3de9df05a41b25b5 upstream.

Fix ia64 generic_defconfig duplicate entries, as warned by:

  arch/ia64/configs/generic_defconfig: warning: override: reassigning to symbol ATA:  => 58
  arch/ia64/configs/generic_defconfig: warning: override: reassigning to symbol ATA_PIIX:  => 59

These 2 symbols still have the same value as in the removed lines.

Link: https://lkml.kernel.org/r/20210411020255.18052-1-rdunlap@infradead.org
Fixes: c331649e6371 ("ia64: Use libata instead of the legacy ide driver in defconfigs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ethtool: pause: make sure we init driver stats

commit 16756d3e77ad58cd07e36cbed724aa13ae5a0278 upstream.

The intention was for pause statistics to not be reported
when driver does not have the relevant callback (only
report an empty netlink nest). What happens currently
we report all 0s instead. Make sure statistics are
initialized to "not set" (which is -1) so the dumping
code skips them.

Fixes: 9a27a33027f2 ("ethtool: add standard pause stats")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: fix the panic when running bpf in xdpdrv mode

commit 4e39a072a6a0fc422ba7da5e4336bdc295d70211 upstream.

Fix this panic by adding more rules to calculate the value of @rss_size_max
which could be used in allocating the queues when bpf is loaded, which,
however, could cause the failure and then trigger the NULL pointer of
vsi->rx_rings. Prio to this fix, the machine doesn't care about how many
cpus are online and then allocates 256 queues on the machine with 32 cpus
online actually.

Once the load of bpf begins, the log will go like this "failed to get
tracking for 256 queues for VSI 0 err -12" and this "setup of MAIN VSI
failed".

Thus, I attach the key information of the crash-log here.

BUG: unable to handle kernel NULL pointer dereference at
0000000000000000
RIP: 0010:i40e_xdp+0xdd/0x1b0 [i40e]
Call Trace:
[2160294.717292]  ? i40e_reconfig_rss_queues+0x170/0x170 [i40e]
[2160294.717666]  dev_xdp_install+0x4f/0x70
[2160294.718036]  dev_change_xdp_fd+0x11f/0x230
[2160294.718380]  ? dev_disable_lro+0xe0/0xe0
[2160294.718705]  do_setlink+0xac7/0xe70
[2160294.719035]  ? __nla_parse+0xed/0x120
[2160294.719365]  rtnl_newlink+0x73b/0x860

Fixes: 41c445ff0f48 ("i40e: main driver core")
Co-developed-by: Shujin Li <lishujin@kuaishou.com>
Signed-off-by: Shujin Li <lishujin@kuaishou.com>
Signed-off-by: Jason Xing <xingwanli@kuaishou.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Make tcp_allowed_congestion_control readonly in non-init netns

commit 97684f0970f6e112926de631fdd98d9693c7e5c1 upstream.

Currently, tcp_allowed_congestion_control is global and writable;
writing to it in any net namespace will leak into all other net
namespaces.

tcp_available_congestion_control and tcp_allowed_congestion_control are
the only sysctls in ipv4_net_table (the per-netns sysctl table) with a
NULL data pointer; their handlers (proc_tcp_available_congestion_control
and proc_allowed_congestion_control) have no other way of referencing a
struct net. Thus, they operate globally.

Because ipv4_net_table does not use designated initializers, there is no
easy way to fix up this one "bad" table entry. However, the data pointer
updating logic shouldn't be applied to NULL pointers anyway, so we
instead force these entries to be read-only.

These sysctls used to exist in ipv4_table (init-net only), but they were
moved to the per-net ipv4_net_table, presumably without realizing that
tcp_allowed_congestion_control was writable and thus introduced a leak.

Because the intent of that commit was only to know (i.e. read) "which
congestion algorithms are available or allowed", this read-only solution
should be sufficient.

The logic added in recent commit
31c4d2f160eb: ("net: Ensure net namespace isolation of sysctls")
does not and cannot check for NULL data pointers, because
other table entries (e.g. /proc/sys/net/netfilter/nf_log/) have
.data=NULL but use other methods (.extra2) to access the struct net.

Fixes: 9cb8e048e5d9 ("net/ipv4/sysctl: show tcp_{allowed, available}_congestion_control in non-initial netns")
Signed-off-by: Jonathon Reinhart <jonathon.reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: ptdump: fix build failure

commit 458376913d86bed2fb781b4952eb6861675ef3be upstream.

READ_ONCE() cannot be used for reading PTEs.  Use ptep_get() instead, to
avoid the following errors:

    CC      mm/ptdump.o
  In file included from <command-line>:
  mm/ptdump.c: In function 'ptdump_pte_entry':
  include/linux/compiler_types.h:320:38: error: call to '__compiletime_assert_207' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE().
    320 |  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
        |                                      ^
  include/linux/compiler_types.h:301:4: note: in definition of macro '__compiletime_assert'
    301 |    prefix ## suffix();    \
        |    ^~~~~~
  include/linux/compiler_types.h:320:2: note: in expansion of macro '_compiletime_assert'
    320 |  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
        |  ^~~~~~~~~~~~~~~~~~~
  include/asm-generic/rwonce.h:36:2: note: in expansion of macro 'compiletime_assert'
     36 |  compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
        |  ^~~~~~~~~~~~~~~~~~
  include/asm-generic/rwonce.h:49:2: note: in expansion of macro 'compiletime_assert_rwonce_type'
     49 |  compiletime_assert_rwonce_type(x);    \
        |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  mm/ptdump.c:114:14: note: in expansion of macro 'READ_ONCE'
    114 |  pte_t val = READ_ONCE(*pte);
        |              ^~~~~~~~~
  make[2]: *** [mm/ptdump.o] Error 1

See commit 481e980a7c19 ("mm: Allow arches to provide ptep_get()") and
commit c0e1c8c22beb ("powerpc/8xx: Provide ptep_get() with 16k pages")
for details.

Link: https://lkml.kernel.org/r/912b349e2bcaa88939904815ca0af945740c6bd4.1618478922.git.christophe.leroy@csgroup.eu
Fixes: 30d621f6723b ("mm: add generic ptdump")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ip6_tunnel: Unregister catch-all devices

commit 941ea91e87a6e879ed82dad4949f6234f2702bec upstream.

Similarly to the sit case, we need to remove the tunnels with no
addresses that have been moved to another network namespace.

Fixes: 0bd8762824e73 ("ip6tnl: add x-netns support")
Signed-off-by: Hristo Venev <hristo@venev.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sit: Unregister catch-all devices

commit 610f8c0fc8d46e0933955ce13af3d64484a4630a upstream.

A sit interface created without a local or a remote address is linked
into the `sit_net::tunnels_wc` list of its original namespace. When
deleting a network namespace, delete the devices that have been moved.

The following script triggers a null pointer dereference if devices
linked in a deleted `sit_net` remain:

    for i in `seq 1 30`; do
        ip netns add ns-test
        ip netns exec ns-test ip link add dev veth0 type veth peer veth1
        ip netns exec ns-test ip link add dev sit$i type sit dev veth0
        ip netns exec ns-test ip link set dev sit$i netns $$
        ip netns del ns-test
    done
    for i in `seq 1 30`; do
        ip link del dev sit$i
    done

Fixes: 5e6700b3bf98f ("sit: add support of x-netns")
Signed-off-by: Hristo Venev <hristo@venev.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: davicom: Fix regulator not turned off on failed probe

commit 31457db3750c0b0ed229d836f2609fdb8a5b790e upstream.

When the probe fails, we must disable the regulator that was previously
enabled.

This patch is a follow-up to commit ac88c531a5b3
("net: davicom: Fix regulator not turned off on failed probe") which missed
one case.

Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Fix setting of RS FEC mode

commit 7a320c9db3e73fb6c4f9a331087df9df18767221 upstream.

Change register setting from bit number to bit mask.

Fixes: b5ede32d3329 ("net/mlx5e: Add support for FEC modes based on 50G per lane links")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_limit: avoid possible divide error in nft_limit_init

commit b895bdf5d643b6feb7c60856326dd4feb6981560 upstream.

div_u64() divides u64 by u32.

nft_limit_init() wants to divide u64 by u64, use the appropriate
math function (div64_u64)

divide error: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 8390 Comm: syz-executor188 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:div_u64_rem include/linux/math64.h:28 [inline]
RIP: 0010:div_u64 include/linux/math64.h:127 [inline]
RIP: 0010:nft_limit_init+0x2a2/0x5e0 net/netfilter/nft_limit.c:85
Code: ef 4c 01 eb 41 0f 92 c7 48 89 de e8 38 a5 22 fa 4d 85 ff 0f 85 97 02 00 00 e8 ea 9e 22 fa 4c 0f af f3 45 89 ed 31 d2 4c 89 f0 <49> f7 f5 49 89 c6 e8 d3 9e 22 fa 48 8d 7d 48 48 b8 00 00 00 00 00
RSP: 0018:ffffc90009447198 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000200000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff875152e6 RDI: 0000000000000003
RBP: ffff888020f80908 R08: 0000200000000000 R09: 0000000000000000
R10: ffffffff875152d8 R11: 0000000000000000 R12: ffffc90009447270
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS:  000000000097a300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200001c4 CR3: 0000000026a52000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 nf_tables_newexpr net/netfilter/nf_tables_api.c:2675 [inline]
 nft_expr_init+0x145/0x2d0 net/netfilter/nf_tables_api.c:2713
 nft_set_elem_expr_alloc+0x27/0x280 net/netfilter/nf_tables_api.c:5160
 nf_tables_newset+0x1997/0x3150 net/netfilter/nf_tables_api.c:4321
 nfnetlink_rcv_batch+0x85a/0x21b0 net/netfilter/nfnetlink.c:456
 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:580 [inline]
 nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:598
 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:674
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: c26844eda9d4 ("netfilter: nf_tables: Fix nft limit burst handling")
Fixes: 3e0f64b7dd31 ("netfilter: nft_limit: fix packet ratelimiting")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Luigi Rizzo <lrizzo@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: fix ingress_ifindex check in mlx5e_flower_parse_meta

commit e3e0f9b279705154b951d579dc3d8b7041710e24 upstream.

In the nft_offload there is the mate flow_dissector with no
ingress_ifindex but with ingress_iftype that only be used
in the software. So if the mask of ingress_ifindex in meta is
0, this meta check should be bypass.

Fixes: 6d65bc64e232 ("net/mlx5e: Add mlx5e_flower_parse_meta support")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: macb: fix the restore of cmp registers

commit a714e27ea8bdee2b238748029d31472d0a65b611 upstream.

Commit a14d273ba159 ("net: macb: restore cmp registers on resume path")
introduces the restore of CMP registers on resume path. In case the IP
doesn't support type 2 screeners (zero on DCFG8 register) the
struct macb::rx_fs_list::list is not initialized and thus the
list_for_each_entry(item, &bp->rx_fs_list.list, list) loop introduced in
commit a14d273ba159 ("net: macb: restore cmp registers on resume path")
will access an uninitialized list leading to crash. Thus, initialize
the struct macb::rx_fs_list::list without taking into account if the
IP supports type 2 screeners or not.

Fixes: a14d273ba159 ("net: macb: restore cmp registers on resume path")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libbpf: Fix potential NULL pointer dereference

commit afd0be7299533bb2e2b09104399d8a467ecbd2c5 upstream.

Wait until after the UMEM is checked for null to dereference it.

Fixes: 43f1bc1efff1 ("libbpf: Restore umem state after socket create failure")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210408052009.7844-1-ciara.loftus@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: arp_tables: add pre_exit hook for table unregister

commit d163a925ebbc6eb5b562b0f1d72c7e817aa75c40 upstream.

Same problem that also existed in iptables/ip(6)tables, when
arptable_filter is removed there is no longer a wait period before the
table/ruleset is free'd.

Unregister the hook in pre_exit, then remove the table in the exit
function.
This used to work correctly because the old nf_hook_unregister API
did unconditional synchronize_net.

The per-net hook unregister function uses call_rcu instead.

Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: bridge: add pre_exit hooks for ebtable unregistration

commit 7ee3c61dcd28bf6e290e06ad382f13511dc790e9 upstream.

Just like ip/ip6/arptables, the hooks have to be removed, then
synchronize_rcu() has to be called to make sure no more packets are being
processed before the ruleset data is released.

Place the hook unregistration in the pre_exit hook, then call the new
ebtables pre_exit function from there.

Years ago, when first netns support got added for netfilter+ebtables,
this used an older (now removed) netfilter hook unregister API, that did
a unconditional synchronize_rcu().

Now that all is done with call_rcu, ebtable_{filter,nat,broute} pernet exit
handlers may free the ebtable ruleset while packets are still in flight.

This can only happens on module removal, not during netns exit.

The new function expects the table name, not the table struct.

This is because upcoming patch set (targeting -next) will remove all
net->xt.{nat,filter,broute}_table instances, this makes it necessary
to avoid external references to those member variables.

The existing APIs will be converted, so follow the upcoming scheme of
passing name + hook type instead.

Fixes: aee12a0a3727e ("ebtables: remove nf_hook_register usage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libnvdimm/region: Fix nvdimm_has_flush() to handle ND_REGION_ASYNC

commit a2948b17f6b936fc52f86c0f92c46d2f91928b79 upstream.

In case a platform doesn't provide explicit flush-hints but provides an
explicit flush callback via ND_REGION_ASYNC region flag, then
nvdimm_has_flush() still returns '0' indicating that writes do not
require flushing. This happens on PPC64 with patch at [1] applied, where
'deep_flush' of a region was denied even though an explicit flush
function was provided.

Fix this by adding a condition to nvdimm_has_flush() to test for the
ND_REGION_ASYNC flag on the region and see if a 'region->flush' callback
is assigned.

Link: http://lore.kernel.org/r/161703936121.36.7260632399582101498.stgit@e1fbed493c87
Fixes: c5d4355d10d4 ("libnvdimm: nd_region flush callback support")
Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Link: https://lore.kernel.org/r/20210402092555.208590-1-vaibhav@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ice: Fix potential infinite loop when using u8 loop counter

commit ef963ae427aa4669905e0a96b3bd9d44dc85db32 upstream.

A for-loop is using a u8 loop counter that is being compared to
a u32 cmp_dcbcfg->numapp to check for the end of the loop. If
cmp_dcbcfg->numapp is larger than 255 then the counter j will wrap
around to zero and hence an infinite loop occurs. Fix this by making
counter j the same type as cmp_dcbcfg->numapp.

Addresses-Coverity: ("Infinite loop")
Fixes: aeac8ce864d9 ("ice: Recognize 860 as iSCSI port in CEE mode")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: conntrack: do not print icmpv6 as unknown via /proc

commit fbea31808ca124dd73ff6bb1e67c9af4607c3e32 upstream.

/proc/net/nf_conntrack shows icmpv6 as unknown.

Fixes: 09ec82f5af99 ("netfilter: conntrack: remove protocol name from l4proto struct")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: flowtable: fix NAT IPv6 offload mangling

commit 0e07e25b481aa021e4b48085ecb8a049e9614510 upstream.

Fix out-of-bound access in the address array.

Fixes: 5c27d8d76ce8 ("netfilter: nf_flow_table_offload: add IPv6 support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbe: fix unbalanced device enable/disable in suspend/resume

commit debb9df311582c83fe369baa35fa4b92e8a9c58a upstream.

pci_disable_device() called in __ixgbe_shutdown() decreases
dev->enable_cnt by 1. pci_enable_device_mem() which increases
dev->enable_cnt by 1, was removed from ixgbe_resume() in commit
6f82b2558735 ("ixgbe: use generic power management"). This caused
unbalanced increase/decrease. So add pci_enable_device_mem() back.

Fix the following call trace.

  ixgbe 0000:17:00.1: disabling already-disabled device
  Call Trace:
   __ixgbe_shutdown+0x10a/0x1e0 [ixgbe]
   ixgbe_suspend+0x32/0x70 [ixgbe]
   pci_pm_suspend+0x87/0x160
   ? pci_pm_freeze+0xd0/0xd0
   dpm_run_callback+0x42/0x170
   __device_suspend+0x114/0x460
   async_suspend+0x1f/0xa0
   async_run_entry_fn+0x3c/0xf0
   process_one_work+0x1dd/0x410
   worker_thread+0x34/0x3f0
   ? cancel_delayed_work+0x90/0x90
   kthread+0x14c/0x170
   ? kthread_park+0x90/0x90
   ret_from_fork+0x1f/0x30

Fixes: 6f82b2558735 ("ixgbe: use generic power management")
Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libsas: Reset num_scatter if libata marks qc as NODATA

commit 176ddd89171ddcf661862d90c5d257877f7326d6 upstream.

When the cache_type for the SCSI device is changed, the SCSI layer issues a
MODE_SELECT command. The caching mode details are communicated via a
request buffer associated with the SCSI command with data direction set as
DMA_TO_DEVICE (scsi_mode_select()). When this command reaches the libata
layer, as a part of generic initial setup, libata layer sets up the
scatterlist for the command using the SCSI command (ata_scsi_qc_new()).
This command is then translated by the libata layer into
ATA_CMD_SET_FEATURES (ata_scsi_mode_select_xlat()). The libata layer treats
this as a non-data command (ata_mselect_caching()), since it only needs an
ATA taskfile to pass the caching on/off information to the device. It does
not need the scatterlist that has been setup, so it does not perform
dma_map_sg() on the scatterlist (ata_qc_issue()). Unfortunately, when this
command reaches the libsas layer (sas_ata_qc_issue()), libsas layer sees it
as a non-data command with a scatterlist. It cannot extract the correct DMA
length since the scatterlist has not been mapped with dma_map_sg() for a
DMA operation. When this partially constructed SAS task reaches pm80xx
LLDD, it results in the following warning:

"pm80xx_chip_sata_req 6058: The sg list address
start_addr=0x0000000000000000 data_len=0x0end_addr_high=0xffffffff
end_addr_low=0xffffffff has crossed 4G boundary"

Update libsas to handle ATA non-data commands separately so num_scatter and
total_xfer_len remain 0.

Link: https://lore.kernel.org/r/20210318225632.2481291-1-jollys@google.com
Fixes: 53de092f47ff ("scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA")
Tested-by: Luo Jiaxing <luojiaxing@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jolly Shah <jollys@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Fix spelling mistake "SPARSEMEM" to "SPARSMEM"

commit 199fc6b8dee7d6d50467a57e0dc7e3e1b7d59966 upstream.

There is a spelling mistake when SPARSEMEM Kconfig copy.

Fixes: a5406a7ff56e ("riscv: Correct SPARSEMEM configuration")
Cc: stable@vger.kernel.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfio/pci: Add missing range check in vfio_pci_mmap

commit 909290786ea335366e21d7f1ed5812b90f2f0a92 upstream.

When mmaping an extra device region verify that the region index
derived from the mmap offset is valid.

Fixes: a15b1883fee1 ("vfio_pci: Allow mapping extra regions")
Cc: stable@vger.kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Message-Id: <20210412214124.GA241759@lisa.in-ulm.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>