cpufreq: armada-37xx: Fix driver cleanup when registration failed

[ Upstream commit 92963903a8e11b9576eb7249f8e81eefa93b6f96 ]

Commit 8db82563451f ("cpufreq: armada-37xx: fix frequency calculation for
opp") changed calculation of frequency passed to the dev_pm_opp_add()
function call. But the code for dev_pm_opp_remove() function call was not
updated, so the driver cleanup phase does not work when registration fails.

This fixes the issue by using the same frequency in both calls.

Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 8db82563451f ("cpufreq: armada-37xx: fix frequency calculation for opp")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0

[ Upstream commit e93033aff684641f71a436ca7a9d2a742126baaf ]

When CPU frequency is at 250 MHz and set_rate() is called with 500 MHz (L1)
quickly followed by a call with 1 GHz (L0), the CPU does not necessarily
stay in L1 for at least 20ms as is required by Marvell errata.

This situation happens frequently with the ondemand cpufreq governor and
can be also reproduced with userspace governor. In most cases it causes CPU
to crash.

This change fixes the above issue and ensures that the CPU always stays in
L1 for at least 20ms when switching from any state to L0.

Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 61c40f35f5cd ("clk: mvebu: armada-37xx-periph: Fix switching CPU rate from 300Mhz to 1.2GHz")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz

[ Upstream commit 4decb9187589f61fe9fc2bc4d9b01160b0a610c5 ]

It was observed that the workaround introduced by commit 61c40f35f5cd
("clk: mvebu: armada-37xx-periph: Fix switching CPU rate from 300Mhz to
1.2GHz") when base CPU frequency is 1.2 GHz is also required when base
CPU frequency is 1 GHz. Otherwise switching CPU frequency directly from
L2 (250 MHz) to L0 (1 GHz) causes a crash.

When base CPU frequency is just 800 MHz no crashed were observed during
switch from L2 to L0.

Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 2089dc33ea0e ("clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: armada-37xx: Fix the AVS value for load L1

[ Upstream commit d118ac2062b5b8331c8768ac81e016617e0996ee ]

The original CPU voltage value for load L1 is too low for Armada 37xx SoC
when base CPU frequency is 1000 or 1200 MHz. It leads to instabilities
where CPU gets stuck soon after dynamic voltage scaling from load L1 to L0.

Update the CPU voltage value for load L1 accordingly when base frequency is
1000 or 1200 MHz. The minimal L1 value for base CPU frequency 1000 MHz is
updated from the original 1.05V to 1.108V and for 1200 MHz is updated to
1.155V. This minimal L1 value is used only in the case when it is lower
than value for L0.

This change fixes CPU instability issues on 1 GHz and 1.2 GHz variants of
Espressobin and 1 GHz Turris Mox.

Marvell previously for 1 GHz variant of Espressobin provided a patch [1]
suitable only for their Marvell Linux kernel 4.4 fork which workarounded
this issue. Patch forced CPU voltage value to 1.108V in all loads. But
such change does not fix CPU instability issues on 1.2 GHz variants of
Armada 3720 SoC.

During testing we come to the conclusion that using 1.108V as minimal
value for L1 load makes 1 GHz variants of Espressobin and Turris Mox boards
stable. And similarly 1.155V for 1.2 GHz variant of Espressobin.

These two values 1.108V and 1.155V are documented in Armada 3700 Hardware
Specifications as typical initial CPU voltage values.

Discussion about this issue is also at the Armbian forum [2].

[1] - https://github.com/MarvellEmbeddedProcessors/linux-marvell/commit/dc33b62c90696afb6adc7dbcc4ebbd48bedec269
[2] - https://forum.armbian.com/topic/10429-how-to-make-espressobin-v7-stable/

Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 1c3528232f4b ("cpufreq: armada-37xx: Add AVS support")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock

[ Upstream commit 4e435a9dd26c46ac018997cc0562d50b1a96f372 ]

Remove the .set_parent method in clk_pm_cpu_ops.

This method was supposed to be needed by the armada-37xx-cpufreq driver,
but was never actually called due to wrong assumptions in the cpufreq
driver. After this was fixed in the cpufreq driver, this method is not
needed anymore.

Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Pali Rohár <pali@kernel.org>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 2089dc33ea0e ("clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: armada-37xx: Fix setting TBG parent for load levels

[ Upstream commit 22592df194e31baf371906cc720da38fa0ab68f5 ]

With CPU frequency determining software [1] we have discovered that
after this driver does one CPU frequency change, the base frequency of
the CPU is set to the frequency of TBG-A-P clock, instead of the TBG
that is parent to the CPU.

This can be reproduced on EspressoBIN and Turris MOX:
  cd /sys/devices/system/cpu/cpufreq/policy0
  echo powersave >scaling_governor
  echo performance >scaling_governor

Running the mhz tool before this driver is loaded reports 1000 MHz, and
after loading the driver and executing commands above the tool reports
800 MHz.

The change of TBG clock selector is supposed to happen in function
armada37xx_cpufreq_dvfs_setup. Before the function returns, it does
this:
  parent = clk_get_parent(clk);
  clk_set_parent(clk, parent);

The armada-37xx-periph clock driver has the .set_parent method
implemented correctly for this, so if the method was actually called,
this would work. But since the introduction of the common clock
framework in commit b2476490ef11 ("clk: introduce the common clock..."),
the clk_set_parent function checks whether the parent is actually
changing, and if the requested new parent is same as the old parent
(which is obviously the case for the code above), the .set_parent method
is not called at all.

This patch fixes this issue by filling the correct TBG clock selector
directly in the armada37xx_cpufreq_dvfs_setup during the filling of
other registers at the same address. But the determination of CPU TBG
index cannot be done via the common clock framework, therefore we need
to access the North Bridge Peripheral Clock registers directly in this
driver.

[1] https://github.com/wtarreau/mhz

Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Pali Rohár <pali@kernel.org>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 92ce45fb875d ("cpufreq: Add DVFS support for Armada 37xx")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - Fix a double free in adf_create_ring

[ Upstream commit f7cae626cabb3350b23722b78fe34dd7a615ca04 ]

In adf_create_ring, if the callee adf_init_ring() failed, the callee will
free the ring->base_addr by dma_free_coherent() and return -EFAULT. Then
adf_create_ring will goto err and the ring->base_addr will be freed again
in adf_cleanup_ring().

My patch sets ring->base_addr to NULL after the first freed to avoid the
double free.

Fixes: a672a9dc872ec ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: sa2ul - Fix memory leak of rxd

[ Upstream commit 854b7737199848a91f6adfa0a03cf6f0c46c86e8 ]

There are two error return paths that are not freeing rxd and causing
memory leaks.  Fix these.

Addresses-Coverity: ("Resource leak")
Fixes: 00c9211f60db ("crypto: sa2ul - Fix DMA mapping API usage")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: sun8i-ss - Fix memory leak of pad

[ Upstream commit 50274b01ac1689b1a3f6bc4b5b3dbf361a55dd3a ]

It appears there are several failure return paths that don't seem
to be free'ing pad. Fix these.

Addresses-Coverity: ("Resource leak")
Fixes: d9b45418a917 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: allwinner - add missing CRYPTO_ prefix

[ Upstream commit ac1af1a788b2002eb9d6f5ca6054517ad27f1930 ]

Some CONFIG select miss CRYPTO_.

Reported-by: Chen-Yu Tsai <wens@csie.org>
Fixes: 56f6d5aee88d1 ("crypto: sun8i-ce - support hash algorithms")
Fixes: d9b45418a9177 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: CPPC: Replace cppc_attr with kobj_attribute

[ Upstream commit 2bc6262c6117dd18106d5aa50d53e945b5d99c51 ]

All of the CPPC sysfs show functions are called via indirect call in
kobj_attr_show(), where they should be of type

ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *attr, char *buf);

because that is the type of the ->show() member in
'struct kobj_attribute' but they are actually of type

ssize_t (*show)(struct kobject *kobj, struct attribute *attr, char *buf);

because of the ->show() member in 'struct cppc_attr', resulting in a
Control Flow Integrity violation [1].

$ cat /sys/devices/system/cpu/cpu0/acpi_cppc/highest_perf
3400

$ dmesg | grep "CFI failure"
[  175.970559] CFI failure (target: show_highest_perf+0x0/0x8):

As far as I can tell, the only difference between 'struct cppc_attr'
and 'struct kobj_attribute' aside from the type of the attr parameter
is the type of the count parameter in the ->store() member (ssize_t vs.
size_t), which does not actually matter because all of these nodes are
read-only.

Eliminate 'struct cppc_attr' in favor of 'struct kobj_attribute' to fix
the violation.

[1]: https://lore.kernel.org/r/20210401233216.2540591-1-samitolvanen@google.com/

Fixes: 158c998ea44b ("ACPI / CPPC: add sysfs support to compute delivered performance")
Link: https://github.com/ClangBuiltLinux/linux/issues/1343
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration

[ Upstream commit 498ba2a8a2756694b6f3888857426dbc8a5e6b6c ]

When CONFIG_ARM_QCOM_SPM_CPUIDLE is y and CONFIG_MMU is not set,
compiling errors are encountered as follows:

drivers/cpuidle/cpuidle-qcom-spm.o: In function `spm_dev_probe':
cpuidle-qcom-spm.c:(.text+0x140): undefined reference to `cpu_resume_arm'
cpuidle-qcom-spm.c:(.text+0x148): undefined reference to `cpu_resume_arm'

Note that cpu_resume_arm is defined when MMU is set. So, add dependency
on MMU in ARM_QCOM_SPM_CPUIDLE configuration.

Fixes: a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210406123328.92904-1-heying24@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: runtime: Replace inline function pm_runtime_callbacks_present()

[ Upstream commit 953c1fd96b1a70bcbbfb10973c2126eba8d891c7 ]

Commit 9a7875461fd0 ("PM: runtime: Replace pm_runtime_callbacks_present()")
forgot to change the inline version.

Fixes: 9a7875461fd0 ("PM: runtime: Replace pm_runtime_callbacks_present()")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: mdt_loader: Detect truncated read of segments

[ Upstream commit 0648c55e3a21ccd816e99b6600d6199fbf39d23a ]

Given that no validation of how much data the firmware loader read in
for a given segment truncated segment files would best case result in a
hash verification failure, without any indication of what went wrong.

Improve this by validating that the firmware loader did return the
amount of data requested.

Fixes: 445c2410a449 ("soc: qcom: mdt_loader: Use request_firmware_into_buf()")
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20210107232526.716989-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: mdt_loader: Validate that p_filesz < p_memsz

[ Upstream commit 84168d1b54e76a1bcb5192991adde5176abe02e3 ]

The code validates that segments of p_memsz bytes of a segment will fit
in the provided memory region, but does not validate that p_filesz bytes
will, which means that an incorrectly crafted ELF header might write
beyond the provided memory region.

Fixes: 051fb70fd4ea ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20210107233119.717173-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: fsl: add missing iounmap() on error in of_fsl_spi_probe()

[ Upstream commit 5fed9fe5b41aea58e5b32be506dc50c9ab9a0e4d ]

Add the missing iounmap() before return from of_fsl_spi_probe()
in the error handling case.

Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210401140350.1677925-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: Fix use-after-free with devm_spi_alloc_*

[ Upstream commit 794aaf01444d4e765e2b067cba01cc69c1c68ed9 ]

We can't rely on the contents of the devres list during
spi_unregister_controller(), as the list is already torn down at the
time we perform devres_find() for devm_spi_release_controller. This
causes devices registered with devm_spi_alloc_{master,slave}() to be
mistakenly identified as legacy, non-devm managed devices and have their
reference counters decremented below 0.

------------[ cut here ]------------
WARNING: CPU: 1 PID: 660 at lib/refcount.c:28 refcount_warn_saturate+0x108/0x174
[<b0396f04>] (refcount_warn_saturate) from [<b03c56a4>] (kobject_put+0x90/0x98)
[<b03c5614>] (kobject_put) from [<b0447b4c>] (put_device+0x20/0x24)
 r4:b6700140
[<b0447b2c>] (put_device) from [<b07515e8>] (devm_spi_release_controller+0x3c/0x40)
[<b07515ac>] (devm_spi_release_controller) from [<b045343c>] (release_nodes+0x84/0xc4)
 r5:b6700180 r4:b6700100
[<b04533b8>] (release_nodes) from [<b0454160>] (devres_release_all+0x5c/0x60)
 r8:b1638c54 r7:b117ad94 r6:b1638c10 r5:b117ad94 r4:b163dc10
[<b0454104>] (devres_release_all) from [<b044e41c>] (__device_release_driver+0x144/0x1ec)
 r5:b117ad94 r4:b163dc10
[<b044e2d8>] (__device_release_driver) from [<b044f70c>] (device_driver_detach+0x84/0xa0)
 r9:00000000 r8:00000000 r7:b117ad94 r6:b163dc54 r5:b1638c10 r4:b163dc10
[<b044f688>] (device_driver_detach) from [<b044d274>] (unbind_store+0xe4/0xf8)

Instead, determine the devm allocation state as a flag on the
controller which is guaranteed to be stable during cleanup.

Fixes: 5e844cc37a5c ("spi: Introduce device-managed SPI controller allocation")
Signed-off-by: William A. Kennington III <wak@google.com>
Link: https://lore.kernel.org/r/20210407095527.2771582-1-wak@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe()

[ Upstream commit 2a65f7e2772613debd03fa2492e76a635aa04545 ]

In case of error, the function device_node_to_regmap() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().

Fixes: ca7b72b5a5f2 ("clocksource: Add driver for the Ingenic JZ47xx OST")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210308123031.2285083-1-weiyongjun1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped

[ Upstream commit ac4daf737674b4d29e19b7c300caff3bcf7160d8 ]

To avoid spurious timer interrupts when KTIME_MAX is used, we need to
configure set_state_oneshot_stopped(). Although implementing this is
optional, it still affects things like power management for the extra
timer interrupt.

For more information, please see commit 8fff52fd5093 ("clockevents:
Introduce CLOCK_EVT_STATE_ONESHOT_STOPPED state") and commit cf8c5009ee37
("clockevents/drivers/arm_arch_timer: Implement
->set_state_oneshot_stopped()").

Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210304072135.52712-4-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/timer-ti-dm: Fix posted mode status check order

[ Upstream commit 212709926c5493a566ca4086ad4f4b0d4e66b553 ]

When the timer is configured in posted mode, we need to check the write-
posted status register (TWPS) before writing to the register.

We now check TWPS after the write starting with commit 52762fbd1c47
("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource
support").

For example, in the TRM for am571x the following is documented in chapter
"22.2.4.13.1.1 Write Posting Synchronization Mode":

"For each register, a status bit is provided in the timer write-posted
 status (TWPS) register. In this mode, it is mandatory that software check
 this status bit before any write access. If a write is attempted to a
 register with a previous access pending, the previous access is discarded
 without notice."

The regression happened when I updated the code to use standard read/write
accessors for the driver instead of using __omap_dm_timer_load_start().
We have__omap_dm_timer_load_start() check the TWPS status correctly using
__omap_dm_timer_write().

Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210304072135.52712-2-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / devfreq: Use more accurate returned new_freq as resume_freq

[ Upstream commit 62453f1ba5d5def9d58e140a50f3f168f028da38 ]

Use the more accurate returned new_freq as resume_freq.
It's the same as how devfreq->previous_freq was updated.

Fixes: 83f8ca45afbf0 ("PM / devfreq: add support for suspend/resume of a devfreq device")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: pdr: Fix error return code in pdr_register_listener

[ Upstream commit 769738fc49bb578e05d404b481a9241d18147d86 ]

Fix to return the error code -EREMOTEIO from pdr_register_listener
rather than 0.

Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20201125065034.154217-1-miaoqinglang@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: greybus: uart: fix unprivileged TIOCCSERIAL

[ Upstream commit 60c6b305c11b5fd167ce5e2ce42f3a9098c388f0 ]

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

A non-privileged user has only ever been able to set the since long
deprecated ASYNC_SPD flags and trying to change any other *supported*
feature should result in -EPERM being returned. Setting the current
values for any supported features should return success.

Fix the greybus implementation which instead indicated that the
TIOCSSERIAL ioctl was not even implemented when a non-privileged user
set the current values.

Fixes: e68453ed28c5 ("greybus: uart-gb: now builds, more framework added")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-7-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: fwserial: fix TIOCGSERIAL implementation

[ Upstream commit 5e84a66f3682af4f177bb24bb2ad5135c51f764a ]

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.

Fix the fwserial implementation by dropping its custom interpretation of
the unused xmit_fifo_size field, which was overflowed with the driver
FIFO size. Also leave the type and flags fields unset as these cannot be
changed.

The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
closing_wait, but let's report back the default value actually used (30
seconds).

Fixes: 7355ba3445f2 ("staging: fwserial: Add TTY-over-Firewire serial driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: fwserial: fix TIOCSSERIAL implementation

[ Upstream commit a7eaaa9d1032e68669bb479496087ba8fc155ab6 ]

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

A non-privileged user has only ever been able to set the since long
deprecated ASYNC_SPD flags and trying to change any other *supported*
feature should result in -EPERM being returned. Setting the current
values for any supported features should return success.

Fix the fwserial implementation which was returning -EPERM also for a
privileged user when trying to change certain unsupported parameters,
and instead return success consistently.

Fixes: 7355ba3445f2 ("staging: fwserial: Add TTY-over-Firewire serial driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8192u: Fix potential infinite loop

[ Upstream commit f9b9263a25dc3d2eaaa829e207434db6951ca7bc ]

The for-loop iterates with a u8 loop counter i and compares this
with the loop upper limit of riv->ieee80211->LinkDetectInfo.SlotNum
that is a u16 type. There is a potential infinite loop if SlotNum
is larger than the u8 loop counter. Fix this by making the loop
counter the same type as SlotNum.

Addresses-Coverity: ("Infinite loop")
Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210407150308.496623-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: comedi: tests: ni_routes_test: Fix compilation error

[ Upstream commit 6db58ed2b2d9bb1792eace4f9aa70e8bdd730ffc ]

The `ni_routes_test` module is not currently selectable using the
Kconfig files, but can be built by specifying `CONFIG_COMEDI_TESTS=m` on
the "make" command line.  It currently fails to compile due to an extra
parameter added to the `ni_assign_device_routes` function by
commit e3b7ce73c578 ("staging: comedi: ni_routes: Allow alternate board
name for routes").  Fix it by supplying the value `NULL` for the added
`alt_board_name` parameter (which specifies that there is no alternate
board name).

Fixes: e3b7ce73c578 ("staging: comedi: ni_routes: Allow alternate board name for routes")
Cc: Spencer E. Olson <olsonse@umich.edu>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210407140142.447250-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic-v3: Fix OF_BAD_ADDR error handling

[ Upstream commit 8e13d96670a4c050d4883e6743a9e9858e5cfe10 ]

When building with extra warnings enabled, clang points out a
mistake in the error handling:

drivers/irqchip/irq-gic-v3-mbi.c:306:21: error: result of comparison of constant 18446744073709551615 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
                if (mbi_phys_base == OF_BAD_ADDR) {

Truncate the constant to the same type as the variable it gets compared
to, to shut make the check work and void the warning.

Fixes: 505287525c24 ("irqchip/gic-v3: Add support for Message Based Interrupts as an MSI controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210323131842.2773094-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init

[ Upstream commit 076de75de1e53160e9b099f75872c1f9adf41a0b ]

If the callee gpmi_alloc_dma_buffer() failed to alloc memory for
this->raw_buffer, gpmi_free_dma_buffer() will be called to free
this->auxiliary_virt. But this->auxiliary_virt is still a non-NULL
and valid ptr.

Then gpmi_alloc_dma_buffer() returns err and gpmi_free_dma_buffer()
is called again to free this->auxiliary_virt in err_out. This causes
a double free.

As gpmi_free_dma_buffer() has already called in gpmi_alloc_dma_buffer's
error path, so it should return err directly instead of releasing the dma
buffer again.

Fixes: 4d02423e9afe6 ("mtd: nand: gpmi: Fix gpmi_nand_init() error path")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210403060905.5251-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: Kconfig: make AD9467 depend on ADI_AXI_ADC symbol

[ Upstream commit 194eafc9c1d49b53b59de9821fb63d423344cae3 ]

Because a dependency on HAS_IOMEM and OF was added for the ADI AXI ADC
driver, this makes the AD9467 driver have some build/dependency issues
when OF is disabled (typically on ACPI archs like x86).

This is because the selection of the AD9467 enforces the ADI_AXI_ADC symbol
which is blocked by the OF (and potentially HAS_IOMEM) being disabled.

To fix this, we make the AD9467 driver depend on the ADI_AXI_ADC symbol.
The AD9467 driver cannot operate on it's own. It requires the ADI AXI ADC
driver to stream data (or some similar IIO interface).

So, the fix here is to make the AD9467 symbol depend on the ADI_AXI_ADC
symbol. At some point this could become it's own subgroup of high-speed
ADCs.

Fixes: be24c65e9fa24 ("iio: adc: adi-axi-adc: add proper Kconfig dependencies")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210324182746.9337-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: qcom_scm: Workaround lack of "is available" call on SC7180

[ Upstream commit 257f2935cbbf14b16912c635fcd8ff43345c953b ]

Some SC7180 firmwares don't implement the QCOM_SCM_INFO_IS_CALL_AVAIL
API, so we can't probe the calling convention. We detect the legacy
calling convention on these firmwares, because the availability call
always fails and legacy is the fallback. This leads to problems where
the rmtfs driver fails to probe, because it tries to assign memory with
a bad calling convention, which then leads to modem failing to load and
all networking, even wifi, to fail. Ouch!

Let's force the calling convention to be what it always is on this SoC,
i.e. arm64. Of course, the calling convention is not the same thing as
implementing the QCOM_SCM_INFO_IS_CALL_AVAIL API. The absence of the "is
this call available" API from the firmware means that any call to
__qcom_scm_is_call_available() fails. This is OK for now though because
none of the calls that are checked for existence are implemented on
firmware running on sc7180. If such a call needs to be checked for
existence in the future, we presume that firmware will implement this
API and then things will "just work".

Cc: Elliot Berman <eberman@codeaurora.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Fixes: 9a434cee773a ("firmware: qcom_scm: Dynamically support SMCCC and legacy conventions")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210223214539.1336155-4-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: qcom_scm: Reduce locking section for __get_convention()

[ Upstream commit f6ea568f0ddcdfad52807110ed8983e610f0e03b ]

We shouldn't need to hold this spinlock here around the entire SCM call
into the firmware and back. Instead, we should be able to query the
firmware, potentially in parallel with other CPUs making the same
convention detection firmware call, and then grab the lock to update the
calling convention detected. The convention doesn't change at runtime so
calling into firmware more than once is possibly wasteful but simpler.
Besides, this is the slow path, not the fast path where we've already
detected the convention used.

More importantly, this allows us to add more logic here to workaround
the case where the firmware call to check for availability isn't
implemented in the firmware at all. In that case we can check the
firmware node compatible string and force a calling convention.

Note that we remove the 'has_queried' logic that is repeated twice. That
could lead to the calling convention being printed multiple times to the
kernel logs if the bool is true but __query_convention() is running on
multiple CPUs. We also shorten the time where the lock is held, but we
keep the lock held around the printk because it doesn't seem hugely
important to drop it for that.

Cc: Elliot Berman <eberman@codeaurora.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Fixes: 9a434cee773a ("firmware: qcom_scm: Dynamically support SMCCC and legacy conventions")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210223214539.1336155-3-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool

[ Upstream commit 9d11af8b06a811c5c4878625f51ce109e2af4e80 ]

Make __qcom_scm_is_call_available() return bool instead of int. The
function has "is" in the name, so it should return a bool to indicate
the truth of the call being available. Unfortunately, it can return a
number < 0 which also looks "true", but not all callers expect that and
thus they think a call is available when really the check to see if the
call is available failed to figure it out.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Elliot Berman <eberman@codeaurora.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Fixes: 0f206514749b ("scsi: firmware: qcom_scm: Add support for programming inline crypto keys")
Fixes: 0434a4061471 ("firmware: qcom: scm: add support to restore secure config to qcm_scm-32")
Fixes: b0a1614fb1f5 ("firmware: qcom: scm: add OCMEM lock/unlock interface")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210223214539.1336155-2-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: mvme147,mvme16x: Don't wipe PCC timer config bits

[ Upstream commit 43262178c043032e7c42d00de44c818ba05f9967 ]

Don't clear the timer 1 configuration bits when clearing the interrupt flag
and counter overflow. As Michael reported, "This results in no timer
interrupts being delivered after the first. Initialization then hangs
in calibrate_delay as the jiffies counter is not updated."

On mvme16x, enable the timer after requesting the irq, consistent with
mvme147.

Cc: Michael Pavone <pavone@retrodev.com>
Fixes: 7529b90d051e ("m68k: mvme147: Handle timer counter overflow")
Fixes: 19999a8b8782 ("m68k: mvme16x: Handle timer counter overflow")
Reported-and-tested-by: Michael Pavone <pavone@retrodev.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Link: https://lore.kernel.org/r/4fdaa113db089b8fb607f7dd818479f8cdcc4547.1617089871.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soundwire: stream: fix memory leak in stream config error path

[ Upstream commit 48f17f96a81763c7c8bf5500460a359b9939359f ]

When stream config is failed, master runtime will release all
slave runtime in the slave_rt_list, but slave runtime is not
added to the list at this time. This patch frees slave runtime
in the config error path to fix the memory leak.

Fixes: 89e590535f32 ("soundwire: Add support for SoundWire stream management")
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Keyon Jie <yang.jie@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210331004610.12242-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: pl353: fix mask of ECC page_size config register

[ Upstream commit 25dcca7fedcd4e31cb368ad846bfd738c0c6307c ]

The mask for page size of ECC Configuration Register should be 0x3,
according to  the datasheet of PL353 smc.

Fixes: fee10bd22678 ("memory: pl353: Add driver for arm pl353 static memory controller")
Signed-off-by: gexueyuan <gexueyuan@gmail.com>
Link: https://lore.kernel.org/r/20210331031056.5326-1-gexueyuan@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: platform: Declare early_platform_cleanup() prototype

[ Upstream commit 1768289b44bae847612751d418fc5c5e680b5e5c ]

Compiler is not happy:

  CC      drivers/base/platform.o
drivers/base/platform.c:1557:20: warning: no previous prototype for ‘early_platform_cleanup’ [-Wmissing-prototypes]
 1557 | void __weak __init early_platform_cleanup(void) { }
      |                    ^~~~~~~~~~~~~~~~~~~~~~

Declare early_platform_cleanup() prototype in the header to make everyone happy.

Fixes: eecd37e105f0 ("drivers: Fix boot problem on SuperH")
Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210331150525.59223-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: nvmem: Fix voltage settings for QTI qfprom-efuse

[ Upstream commit 9ec4f4b0e9fd3ad4b9a38bddb75b516ea09f4628 ]

QFPROM controller hardware requires 1.8V min for fuse blowing.
So, this change sets the voltage to 1.8V, required to blow the fuse
for qfprom-efuse controller.

To disable fuse blowing, we set the voltage to 0V since this may
be a shared rail and may be able to run at a lower rate when we're
not blowing fuses.

Fixes: 93b4e49f8c86 ("nvmem: qfprom: Add fuse blowing support")
Reported-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210330111241.19401-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: gadget: udc: fix wrong pointer passed to IS_ERR() and PTR_ERR()

[ Upstream commit 2e3d055bf27d70204cae349335a62a4f9b7c165a ]

IS_ERR() and PTR_ERR() use wrong pointer, it should be
udc->virt_addr, fix it.

Fixes: 1b9f35adb0ff ("usb: gadget: udc: Add Synopsys UDC Platform driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210330130159.1051979-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: aspeed: fix dma map failure

[ Upstream commit bd4d607044b961cecbf8c4c2f3bb5da4fb156993 ]

Currently the virtual port_dev device is passed to DMA API, and this is
wrong because the device passed to DMA API calls must be the actual
hardware device performing the DMA.

The patch replaces usb_gadget_map_request/usb_gadget_unmap_request APIs
with usb_gadget_map_request_by_dev/usb_gadget_unmap_request_by_dev APIs
so the DMA capable platform device can be passed to the DMA APIs.

The patch fixes below backtrace detected on Facebook AST2500 OpenBMC
platforms:

[<80106550>] show_stack+0x20/0x24
[<80106868>] dump_stack+0x28/0x30
[<80823540>] __warn+0xfc/0x110
[<8011ac30>] warn_slowpath_fmt+0xb0/0xc0
[<8011ad44>] dma_map_page_attrs+0x24c/0x314
[<8016a27c>] usb_gadget_map_request_by_dev+0x100/0x1e4
[<805cedd8>] usb_gadget_map_request+0x1c/0x20
[<805cefbc>] ast_vhub_epn_queue+0xa0/0x1d8
[<7f02f710>] usb_ep_queue+0x48/0xc4
[<805cd3e8>] ecm_do_notify+0xf8/0x248
[<7f145920>] ecm_set_alt+0xc8/0x1d0
[<7f145c34>] composite_setup+0x680/0x1d30
[<7f00deb8>] ast_vhub_ep0_handle_setup+0xa4/0x1bc
[<7f02ee94>] ast_vhub_dev_irq+0x58/0x84
[<7f0309e0>] ast_vhub_irq+0xb0/0x1c8
[<7f02e118>] __handle_irq_event_percpu+0x50/0x19c
[<8015e5bc>] handle_irq_event_percpu+0x38/0x8c
[<8015e758>] handle_irq_event+0x38/0x4c

Fixes: 7ecca2a4080c ("usb/gadget: Add driver for Aspeed SoC virtual hub")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Link: https://lore.kernel.org/r/20210331045831.28700-1-rentao.bupt@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix error path in adf_isr_resource_alloc()

[ Upstream commit 83dc1173d73f80cbce2fee4d308f51f87b2f26ae ]

The function adf_isr_resource_alloc() is not unwinding correctly in case
of error.
This patch fixes the error paths and propagate the errors to the caller.

Fixes: 7afa232e76ce ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: poly1305 - fix poly1305_core_setkey() declaration

[ Upstream commit 8d195e7a8ada68928f2aedb2c18302a4518fe68e ]

gcc-11 points out a mismatch between the declaration and the definition
of poly1305_core_setkey():

lib/crypto/poly1305-donna32.c:13:67: error: argument 2 of type ‘const u8[16]’ {aka ‘const unsigned char[16]’} with mismatched bound [-Werror=array-parameter=]
   13 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16])
      |                                                          ~~~~~~~~~^~~~~~~~~~~
In file included from lib/crypto/poly1305-donna32.c:11:
include/crypto/internal/poly1305.h:21:68: note: previously declared as ‘const u8 *’ {aka ‘const unsigned char *’}
   21 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 *raw_key);

This is harmless in principle, as the calling conventions are the same,
but the more specific prototype allows better type checking in the
caller.

Change the declaration to match the actual function definition.
The poly1305_simd_init() is a bit suspicious here, as it previously
had a 32-byte argument type, but looks like it needs to take the
16-byte POLY1305_BLOCK_SIZE array instead.

Fixes: 1c08a104360f ("crypto: poly1305 - add new 32 and 64-bit generic versions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: fix copy stateid copying for the async copy

[ Upstream commit e739b12042b6b079a397a3c234f96c09d1de0b40 ]

This patch fixes Dan Carpenter's report that the static checker
found a problem where memcpy() was copying into too small of a buffer.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e0639dc5805a ("NFSD introduce async copy feature")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: Fix sparse warning in nfs4proc.c

[ Upstream commit eb162e1772f85231dabc789fb4bfea63d2d9df79 ]

linux/fs/nfsd/nfs4proc.c:1542:24: warning: incorrect type in assignment (different base types)
linux/fs/nfsd/nfs4proc.c:1542:24:    expected restricted __be32 [assigned] [usertype] status
linux/fs/nfsd/nfs4proc.c:1542:24:    got int

Clean-up: The dup_copy_fields() function returns only zero, so make
it return void for now, and get rid of the return code check.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mediatek: fix reset GPIO level on pumpkin

[ Upstream commit a7dceafed43a4a610d340da3703653cca2c50c1d ]

The tca6416 chip is active low. Fix the reset-gpios value.

Fixes: e2a8fa1e0faa ("arm64: dts: mediatek: fix tca6416 reset GPIOs in pumpkin")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20210223221826.2063911-1-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionally

[ Upstream commit 6cb17707aad869de163d7bf42c253caf501be4e2 ]

Merely enabling CONFIG_COMPILE_TEST should not enable additional code.
To fix this, restrict the automatic enabling of ARMADA375_USBCLUSTER_PHY
to MACH_ARMADA_375, and ask the user in case of compile-testing.

Fixes: eee47538ec1f2619 ("phy: add support for USB cluster on the Armada 375 SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210208150252.424706-1-geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: ti: j721e-wiz: Delete "clk_div_sel" clk provider during cleanup

[ Upstream commit 7e52a39f1942b771213678c56002ce90a2f126d2 ]

commit 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module
present in TI J721E SoC") modeled both MUX clocks and DIVIDER clocks in
wiz. However during cleanup, it removed only the MUX clock provider.
Remove the DIVIDER clock provider here.

Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210310120840.16447-3-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soundwire: bus: Fix device found flag correctly

[ Upstream commit f03690f4f6992225d05dbd1171212e5be5a370dd ]

found flag is used to indicate SoundWire devices that are
both enumerated on the bus and available in the device list.
However this flag is not reset correctly after one iteration,
This could miss some of the devices that are enumerated on the
bus but not in device list. So reset this correctly to fix this issue!

Fixes: d52d7a1be02c ("soundwire: Add Slave status handling helpers")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210309104816.20350-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: qcom: Put child node before return

[ Upstream commit ac6ad7c2a862d682bb584a4bc904d89fa7721af8 ]

Put child node before return to fix potential reference count leak.
Generally, the reference count of child is incremented and decremented
automatically in the macro for_each_available_child_of_node() and should
be decremented manually if the loop is broken in loop body.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 335a12754808 ("bus: qcom: add EBI2 driver")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121114907.109267-1-bianpan2016@163.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r8a779a0: Fix PMU interrupt

[ Upstream commit bbbf6db5a0b56199702bb225132831bced2eee41 ]

Should use PPI No.7 for the PMU. Otherwise, the perf command didn't
show any information.

Fixes: 834c310f5418 ("arm64: dts: renesas: Add Renesas R8A779A0 SoC support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210325041949.925777-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: require write permissions for locking and badblock ioctls

[ Upstream commit 1e97743fd180981bef5f01402342bb54bf1c6366 ]

MEMLOCK, MEMUNLOCK and OTPLOCK modify protection bits. Thus require
write permission. Depending on the hardware MEMLOCK might even be
write-once, e.g. for SPI-NOR flashes with their WP# tied to GND. OTPLOCK
is always write-once.

MEMSETBADBLOCK modifies the bad block table.

Fixes: f7e6b19bc764 ("mtd: properly check all write ioctls for permissions")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210303155735.25887-1-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties'

[ Upstream commit 9f299d3264c67a892af87337dbaa0bdd20830c0c ]

To use additional properties 'bluetooth' on serial, need replace false with
'type: object' for 'additionalProperties' to make it as a node, else will
run into dtbs_check warnings.

'arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800:
'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+'

Fixes: af1c2d81695b ("dt-bindings: serial: Convert STM32 UART to json-schema")
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1616757302-7889-8-git-send-email-dillon.minfei@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: s3c: Fix the error handling path in 's3c2410_udc_probe()'

[ Upstream commit e5242861ec6a0bce25b4cd10af0fc8a508fd067d ]

Some 'clk_prepare_enable()' and 'clk_get()' must be undone in the error
handling path of the probe function, as already done in the remove
function.

Fixes: 3fc154b6b813 ("USB Gadget driver for Samsung s3c2410 ARM SoC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/2bee52e4ce968f48b4c32545cf8f3b2ab825ba82.1616830026.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: s3c: Fix incorrect resources releasing

[ Upstream commit 42067ccd9eb2077979ac3ce8b7b95c694bd09e14 ]

Since commit 188db4435ac6 ("usb: gadget: s3c: use platform resources"),
'request_mem_region()' and 'ioremap()' are no more used, so they don't need
to be undone in the error handling path of the probe and in the remove
function.

Remove these calls and the unneeded 'rsrc_start' and 'rsrc_len' global
variables.

Fixes: 188db4435ac6 ("usb: gadget: s3c: use platform resources")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/b317638464f188159bd8eea44427dd359e480625.1616830026.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Complete OUT requests on short packets

[ Upstream commit 75bb93be0027123b5db6cbcce89eb62f0f6b3c5b ]

A short packet indicates the end of a transfer and marks the request as
complete.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-8-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Don't DMA more than the buffer can take

[ Upstream commit 3e7c2510bdfe89a9ec223dd7acd6bfc8bb1cbeb6 ]

Before this, it wrote as much as available into the buffer, even if it
didn't fit.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-7-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Mask GRP2 interrupts we don't handle

[ Upstream commit 9aee3a23d6455200702f3a57e731fa11e8408667 ]

Currently it leaves unhandled interrupts unmasked, but those are never
acked. In the case of a "device idle" interrupt, this leads to an
effectively frozen system until plugging it in.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-5-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Remove a dubious condition leading to fotg210_done

[ Upstream commit c7f755b243494d6043aadcd9a2989cb157958b95 ]

When the EP0 IN request was not completed but less than a packet sent,
it would complete the request successfully. That doesn't make sense
and can't really happen as fotg210_start_dma always sends
min(length, maxpkt) bytes.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-4-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Fix EP0 IN requests bigger than two packets

[ Upstream commit 078ba935651e149c92c41161e0322e3372cc2705 ]

For a 134 Byte packet, it sends the first two 64 Byte packets just fine,
but then notice that less than a packet is remaining and call fotg210_done
without actually sending the rest.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-3-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Fix DMA on EP0 for length > max packet size

[ Upstream commit 755915fc28edfc608fa89a163014acb2f31c1e19 ]

For a 75 Byte request, it would send the first 64 separately, then detect
that the remaining 11 Byte fit into a single DMA, but due to this bug set
the length to the original 75 Bytes. This leads to a DMA failure (which is
ignored...) and the request completes without the remaining bytes having
been sent.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-2-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - ADF_STATUS_PF_RUNNING should be set after adf_dev_init

[ Upstream commit 8609f5cfdc872fc3a462efa6a3eca5cb1e2f6446 ]

ADF_STATUS_PF_RUNNING is (only) used and checked by adf_vf2pf_shutdown()
before calling adf_iov_putmsg()->mutex_lock(vf2pf_lock), however the
vf2pf_lock is initialized in adf_dev_init(), which can fail and when it
fail, the vf2pf_lock is either not initialized or destroyed, a subsequent
use of vf2pf_lock will cause issue.
To fix this issue, only set this flag if adf_dev_init() returns 0.

[    7.178404] BUG: KASAN: user-memory-access in __mutex_lock.isra.0+0x1ac/0x7c0
[    7.180345] Call Trace:
[    7.182576]  mutex_lock+0xc9/0xd0
[    7.183257]  adf_iov_putmsg+0x118/0x1a0 [intel_qat]
[    7.183541]  adf_vf2pf_shutdown+0x4d/0x7b [intel_qat]
[    7.183834]  adf_dev_shutdown+0x172/0x2b0 [intel_qat]
[    7.184127]  adf_probe+0x5e9/0x600 [qat_dh895xccvf]

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: 25c6ffb249f6 ("crypto: qat - check if PF is running")
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - don't release uninitialized resources

[ Upstream commit b66accaab3791e15ac99c92f236d0d3a6d5bd64e ]

adf_vf_isr_resource_alloc() is not unwinding correctly when error
happens and it want to release uninitialized resources.
To fix this, only release initialized resources.

[    1.792845] Trying to free already-free IRQ 11
[    1.793091] WARNING: CPU: 0 PID: 182 at kernel/irq/manage.c:1821 free_irq+0x202/0x380
[    1.801340] Call Trace:
[    1.801477]  adf_vf_isr_resource_free+0x32/0xb0 [intel_qat]
[    1.801785]  adf_vf_isr_resource_alloc+0x14d/0x150 [intel_qat]
[    1.802105]  adf_dev_init+0xba/0x140 [intel_qat]

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: dd0f368398ea ("crypto: qat - Add qat dh895xcc VF driver")
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - fix command queuing to TEE ring buffer

[ Upstream commit 00aa6e65aa04e500a11a2c91e92a11c37b9e234d ]

Multiple threads or clients can submit a command to the TEE ring
buffer. This patch helps to synchronize command submission to the
ring.

One thread shall write a command to a TEE ring buffer entry only if:

 - Trusted OS has notified that the TEE command for the given entry
   has been processed and driver has copied the TEE response into
   client buffer.

 - The command entry is empty and can be written into.

After a command has been written to the TEE ring buffer, the global
wptr (mutex protected) shall be incremented for use by next client.

If PSP became unresponsive while processing TEE request from a
client, then further command submission to queue will be disabled.

Fixes: 33960acccfbd (crypto: ccp - add TEE support for Raven Ridge)
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: pch_udc: Provide a GPIO line used on Intel Minnowboard (v1)

[ Upstream commit 049d3db625a652e23488db88b6104de4d5b62f16 ]

Intel Minnowboard (v1) uses SCH GPIO line SUS7 (i.e. 12)
for VBUS sense. Provide a DMI based quirk to have it's being used.

Fixes: e20849a8c883 ("usb: gadget: pch_udc: Convert to use GPIO descriptors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: pch_udc: Initialize device pointer before use

[ Upstream commit 971d080212be4ce2b91047d25a657f46d3e39635 ]

During conversion to use GPIO descriptors the device pointer,
which is applied to devm_gpiod_get(), is not yet initialized.

Move initialization in the ->probe() in order to have it set before use.

Fixes: e20849a8c883 ("usb: gadget: pch_udc: Convert to use GPIO descriptors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: pch_udc: Check for DMA mapping error

[ Upstream commit 4a28d77e359009b846951b06f7c0d8eec8dce298 ]

DMA mapping might fail, we have to check it with dma_mapping_error().
Otherwise DMA-API is not happy:

  DMA-API: pch_udc 0000:02:02.4: device driver failed to check map error[device address=0x00000000027ee678] [size=64 bytes] [mapped as single]

Fixes: abab0c67c061 ("usb: pch_udc: Fixed issue which does not work with g_serial")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: pch_udc: Check if driver is present before calling ->setup()

[ Upstream commit fbdbbe6d3ee502b3bdeb4f255196bb45003614be ]

Since we have a separate routine for VBUS sense, the interrupt may occur
before gadget driver is present. Hence, ->setup() call may oops the kernel:

[   55.245843] BUG: kernel NULL pointer dereference, address: 00000010
...
[   55.245843] EIP: pch_udc_isr.cold+0x162/0x33f
...
[   55.245843]  <IRQ>
[   55.245843]  ? pch_udc_svc_data_out+0x160/0x160

Check if driver is present before calling ->setup().

Fixes: f646cf94520e ("USB device driver of Topcliff PCH")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: pch_udc: Replace cpu_to_le32() by lower_32_bits()

[ Upstream commit 91356fed6afd1c83bf0d3df1fc336d54e38f0458 ]

Either way ~0 will be in the correct byte order, hence
replace cpu_to_le32() by lower_32_bits(). Moreover,
it makes sparse happy, otherwise it complains:

.../pch_udc.c:1813:27: warning: incorrect type in assignment (different base types)
.../pch_udc.c:1813:27:    expected unsigned int [usertype] dataptr
.../pch_udc.c:1813:27:    got restricted __le32 [usertype]

Fixes: f646cf94520e ("USB device driver of Topcliff PCH")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

devtmpfs: fix placement of complete() call

[ Upstream commit 38f087de8947700d3b06d3d1594490e0f611c5d1 ]

Calling complete() from within the __init function is wrong -
theoretically, the init process could proceed all the way to freeing
the init mem before the devtmpfsd thread gets to execute the return
instruction in devtmpfs_setup().

In practice, it seems to be harmless as gcc inlines devtmpfs_setup()
into devtmpfsd(). So the calls of the __init functions init_chdir()
etc. actually happen from devtmpfs_setup(), but the __ref on that one
silences modpost (it's all right, because those calls happen before
the complete()). But it does make the __init annotation of the setup
function moot, which we'll fix in a subsequent patch.

Fixes: bcbacc4909f1 ("devtmpfs: refactor devtmpfsd()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20210312103027.2701413-1-linux@rasmusvillemoes.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/microcode: Check for offline CPUs before requesting new microcode

[ Upstream commit 7189b3c11903667808029ec9766a6e96de5012a5 ]

Currently, the late microcode loading mechanism checks whether any CPUs
are offlined, and, in such a case, aborts the load attempt.

However, this must be done before the kernel caches new microcode from
the filesystem. Otherwise, when offlined CPUs are onlined later, those
cores are going to be updated through the CPU hotplug notifier callback
with the new microcode, while CPUs previously onine will continue to run
with the older microcode.

For example:

Turn off one core (2 threads):

  echo 0 > /sys/devices/system/cpu/cpu3/online
  echo 0 > /sys/devices/system/cpu/cpu1/online

Install the ucode fails because a primary SMT thread is offline:

  cp intel-ucode/06-8e-09 /lib/firmware/intel-ucode/
  echo 1 > /sys/devices/system/cpu/microcode/reload
  bash: echo: write error: Invalid argument

Turn the core back on

  echo 1 > /sys/devices/system/cpu/cpu3/online
  echo 1 > /sys/devices/system/cpu/cpu1/online
  cat /proc/cpuinfo |grep microcode
  microcode : 0x30
  microcode : 0xde
  microcode : 0x30
  microcode : 0xde

The rationale for why the update is aborted when at least one primary
thread is offline is because even if that thread is soft-offlined
and idle, it will still have to participate in broadcasted MCE's
synchronization dance or enter SMM, and in both examples it will execute
instructions so it better have the same microcode revision as the other
cores.

 [ bp: Heavily edit and extend commit message with the reasoning behind all
   this. ]

Fixes: 30ec26da9967 ("x86/microcode: Do not upload microcode if CPUs are offline")
Signed-off-by: Otavio Pontes <otavio.pontes@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/20210319165515.9240-2-otavio.pontes@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: stm32: Fix use-after-free on unbind

[ Upstream commit 79c6246ae8793448c05da86a4c82298eed8549b0 ]

stm32_spi_remove() accesses the driver's private data after calling
spi_unregister_master() even though that function releases the last
reference on the spi_master and thereby frees the private data.

Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.

Fixes: 8d559a64f00b ("spi: stm32: drop devres version of spi_register_master")

Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1616052290-10887-1-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r8a77980: Fix vin4-7 endpoint binding

[ Upstream commit c8aebc1346522d3569690867ce3996642ad52e01 ]

This fixes the bindings in media framework:
The CSI40 is endpoint number 2
The CSI41 is endpoint number 3

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210312174735.2118212-1-niklas.soderlund+renesas@ragnatech.se
Fixes: 3182aa4e0bf4d0ee ("arm64: dts: renesas: r8a77980: add CSI2/VIN support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: bd9576: Fix return from bd957x_probe()

[ Upstream commit 320fcd6bbd2b500923db518902c2c640242d2b50 ]

The probe() function returns an uninitialized variable in the success
path.  There is no need for the "err" variable at all, just delete it.

Fixes: b014e9fae7e7 ("regulator: Support ROHM BD9576MUF and BD9573MUF")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/YEsbfLJfEWtnRpoU@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: stm32: drop devres version of spi_register_master

[ Upstream commit 8d559a64f00b59af9cc02b803ff52f6e6880a651 ]

A call to spi_unregister_master() triggers calling remove()
for all the spi devices binded to the spi master.

Some spi device driver requires to "talk" with the spi device
during the remove(), e.g.:
- a LCD panel like drivers/gpu/drm/panel/panel-lg-lg4573.c
  will turn off the backlighting sending a command over spi.
This implies that the spi master must be fully functional when
spi_unregister_master() is called, either if it is called
explicitly in the master's remove() code or implicitly by the
devres framework.

Devres calls devres_release_all() to release all the resources
"after" the remove() of the spi master driver (check code of
__device_release_driver() in drivers/base/dd.c).
If the spi master driver has an empty remove() then there would
be no issue; the devres_release_all() will release everything
in reverse order w.r.t. probe().
But if code in spi master driver remove() disables the spi or
makes it not functional (like in this spi-stm32), then devres
cannot be used safely for unregistering the spi master and the
binded spi devices.

Replace devm_spi_register_master() with spi_register_master()
and add spi_unregister_master() as first action in remove().

Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller")

Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1615545286-5395-1-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: sun8i-ss - Fix memory leak of object d when dma_iv fails to map

[ Upstream commit 98b5ef3e97b16eaeeedb936f8bda3594ff84a70e ]

In the case where the dma_iv mapping fails, the return error path leaks
the memory allocated to object d.  Fix this by adding a new error return
label and jumping to this to ensure d is free'd before the return.

Addresses-Coverity: ("Resource leak")
Fixes: ac2614d721de ("crypto: sun8i-ss - Add support for the PRNG")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: db845c: fix correct powerdown pin for WSA881x

[ Upstream commit c561740e7cfefaf3003a256f3a0cd9f8a069137c ]

WSA881x powerdown pin is connected to GPIO1 not gpio2, so correct this.
This was working so far due to a shift bug in gpio driver, however
once that is fixed this will stop working, so fix this!

Fixes: 89a32a4e769cc ("arm64: dts: qcom: db845c: add analog audio support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210309102025.28405-1-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: fix number of pins in 'gpio-ranges'

[ Upstream commit e526cb03e2aed42866a0919485a3d8ac130972cf ]

The last cell of 'gpio-ranges' should be number of GPIO pins, and in
case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
than msm_pinctrl_soc_data.ngpio - 1.

This fixes the problem that when the last GPIO pin in the range is
configured with the following call sequence, it always fails with
-EPROBE_DEFER.

    pinctrl_gpio_set_config()
        pinctrl_get_device_gpio_range()
            pinctrl_match_gpio_range()

Fixes: 16951b490b20 ("arm64: dts: qcom: sm8250: Add TLMM pinctrl node")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210303033106.549-4-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8150: fix number of pins in 'gpio-ranges'

[ Upstream commit de3abdf3d15c6e7f456e2de3f9da78f3a31414cc ]

The last cell of 'gpio-ranges' should be number of GPIO pins, and in
case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
than msm_pinctrl_soc_data.ngpio - 1.

This fixes the problem that when the last GPIO pin in the range is
configured with the following call sequence, it always fails with
-EPROBE_DEFER.

    pinctrl_gpio_set_config()
        pinctrl_get_device_gpio_range()
            pinctrl_match_gpio_range()

Fixes: e13c6d144fa0 ("arm64: dts: qcom: sm8150: Add base dts file")
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210303033106.549-3-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845: fix number of pins in 'gpio-ranges'

[ Upstream commit 02058fc3839df65ff64de2a6b1c5de8c9fd705c1 ]

The last cell of 'gpio-ranges' should be number of GPIO pins, and in
case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
than msm_pinctrl_soc_data.ngpio - 1.

This fixes the problem that when the last GPIO pin in the range is
configured with the following call sequence, it always fails with
-EPROBE_DEFER.

    pinctrl_gpio_set_config()
        pinctrl_get_device_gpio_range()
            pinctrl_match_gpio_range()

Fixes: bc2c806293c6 ("arm64: dts: qcom: sdm845: Add gpio-ranges to TLMM node")
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210303033106.549-2-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: Fix timer interrupt to specify EL2 physical timer

[ Upstream commit 29a3349543e4ce3fe4e2a761403cc629e3534c67 ]

ARM architected timer interrupts DT property specifies EL2/HYP
physical interrupt and not EL2/HYP virtual interrupt for the 4th
interrupt property. As per interrupt documentation for SM8250 SoC,
the EL2/HYP physical timer interrupt is 10 and EL2/HYP virtual timer
interrupt is 12, so fix the 4th timer interrupt to be EL2 physical
timer interrupt (10 in this case).

Fixes: 60378f1a171e ("arm64: dts: qcom: sm8250: Add sm8250 dts file")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/744e58f725d279eb2b049a7da42b0f09189f4054.1613468366.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: Fix level triggered PMU interrupt polarity

[ Upstream commit 93138ef5ac923b10f81575d35dbcb83136cbfc40 ]

As per interrupt documentation for SM8250 SoC, the polarity
for level triggered PMU interrupt is low, fix this.

Fixes: 60378f1a171e ("arm64: dts: qcom: sm8250: Add sm8250 dts file")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/96680a1c6488955c9eef7973c28026462b2a4ec0.1613468366.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: fix usart 2 & 3 pinconf to wake up with flow control

[ Upstream commit a1429f3d3029b65cd4032f6218d5290911377ce4 ]

Modify usart 2 & 3 pins to allow wake up from low power mode while the
hardware flow control is activated. UART RTS pin need to stay configure
in idle mode to receive characters in order to wake up.

Fixes: 842ed898a757 ("ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrl")

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: maps: fix error return code of physmap_flash_remove()

[ Upstream commit 620b90d30c08684dc6ebee07c72755d997f9d1f6 ]

When platform_get_drvdata() returns NULL to info, no error return code
of physmap_flash_remove() is assigned.
To fix this bug, err is assigned with -EINVAL in this case

Fixes: 73566edf9b91 ("[MTD] Convert physmap to platform driver")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210308034446.3052-1-baijiaju1990@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: don't lock when recursively deleting partitions

[ Upstream commit cb4543054c5c4fd33df960b41d7b483ebca8e786 ]

When recursively deleting partitions, don't acquire the masters
partition lock twice. Otherwise the process ends up in a deadlocked
state.

Fixes: 46b5889cc2c5 ("mtd: implement proper partition handling")
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210217195320.893253-1-mail@david-bauer.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: qcom: Return actual error code instead of -ENODEV

[ Upstream commit 55fbb9ba4f06cb6aff32daca1e1910173c13ec51 ]

In qcom_probe_nand_devices() function, the error code returned by
qcom_nand_host_init_and_register() is converted to -ENODEV in the case
of failure. This poses issue if -EPROBE_DEFER is returned when the
dependency is not available for a component like parser.

So let's restructure the error handling logic a bit and return the
actual error code in case of qcom_nand_host_init_and_register() failure.

Fixes: c76b78d8ec05 ("mtd: nand: Qualcomm NAND controller driver")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: Handle possible -EPROBE_DEFER from parse_mtd_partitions()

[ Upstream commit 08608adb520e51403be7592c2214846fa440a23a ]

There are chances that the parse_mtd_partitions() function will return
-EPROBE_DEFER in mtd_device_parse_register(). This might happen when
the dependency is not available for the parser. For instance, on SDX55
the MTD_QCOMSMEM_PARTS parser depends on the QCOM_SMEM driver to parse
the partitions defined in the shared memory region. With the current
flow, the error returned from parse_mtd_partitions() will be discarded
in favor of trying to add the fallback partition.

This will prevent the driver to end up in probe deferred pool and the
partitions won't be parsed even after the QCOM_SMEM driver is available.

Fix this issue by bailing out of mtd_device_parse_register() when
-EPROBE_DEFER error is returned from parse_mtd_partitions() function and
propagate the error code to the driver core for probing later.

Fixes: 5ac67ce36cfe ("mtd: move code adding (registering) partitions to the parse_mtd_partitions()")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: brcmnand: fix OOB R/W with Hamming ECC

[ Upstream commit f5200c14242fb8fa4a9b93f7fd4064d237e58785 ]

Hamming ECC doesn't cover the OOB data, so reading or writing OOB shall
always be done without ECC enabled.
This is a problem when adding JFFS2 cleanmarkers to erased blocks. If JFFS2
clenmarkers are added to the OOB with ECC enabled, OOB bytes will be changed
from ff ff ff to 00 00 00, reporting incorrect ECC errors.

Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210224080210.23686-1-noltari@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: fsmc: Fix error code in fsmc_nand_probe()

[ Upstream commit e7a97528e3c787802d8c643d6ab2f428511bb047 ]

If dma_request_channel() fails then the probe fails and it should
return a negative error code, but currently it returns success.

fixes: 4774fb0a48aa ("mtd: nand/fsmc: Add DMA support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/YCqaOZ83OvPOzLwh@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: rockchip: avoid objtool warning

[ Upstream commit e50989527faeafb79f45a0f7529ba8e01dff1fff ]

Building this file with clang leads to a an unreachable code path
causing a warning from objtool:

drivers/spi/spi-rockchip.o: warning: objtool: rockchip_spi_transfer_one()+0x2e0: sibling call from callable instruction with modified stack frame

Change the unreachable() into an error return that can be
handled if it ever happens, rather than silently crashing
the kernel.

Fixes: 65498c6ae241 ("spi: rockchip: support 4bit words")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20210226140109.3477093-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regmap: set debugfs_name to NULL after it is freed

[ Upstream commit e41a962f82e7afb5b1ee644f48ad0b3aee656268 ]

There is a upstream commit cffa4b2122f5("regmap:debugfs:
Fix a memory leak when calling regmap_attach_dev") that
adds a if condition when create name for debugfs_name.
With below function invoking logical, debugfs_name is
freed in regmap_debugfs_exit(), but it is not created again
because of the if condition introduced by above commit.
regmap_reinit_cache()
regmap_debugfs_exit()
...
regmap_debugfs_init()
So, set debugfs_name to NULL after it is freed.

Fixes: cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev")
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Link: https://lore.kernel.org/r/20210226021737.7690-1-Meng.Li@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: stusb160x: fix return value check in stusb160x_probe()

[ Upstream commit f2d90e07b5df2c7745ae66d2d48cc350d3f1c7d2 ]

In case of error, the function device_get_named_child_node() returns
NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.

Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210308094839.3586773-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: tps6598x: Fix return value check in tps6598x_probe()

[ Upstream commit 604c75893a01c8a3b5bd6dac55535963cd44c3f5 ]

In case of error, the function device_get_named_child_node() returns
NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.

Fixes: 18a6c866bb19 ("usb: typec: tps6598x: Add USB role switching logic")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210308094841.3587751-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: tcpci: Check ROLE_CONTROL while interpreting CC_STATUS

[ Upstream commit 19c234a14eafca78e0bc14ffb8be3891096ce147 ]

While interpreting CC_STATUS, ROLE_CONTROL has to be read to make
sure that CC1/CC2 is not forced presenting Rp/Rd.

>From the TCPCI spec:

4.4.5.2 ROLE_CONTROL (Normative):
The TCPM shall write B6 (DRP) = 0b and B3..0 (CC1/CC2) if it wishes
to control the Rp/Rd directly instead of having the TCPC perform
DRP toggling autonomously. When controlling Rp/Rd directly, the
TCPM writes to B3..0 (CC1/CC2) each time it wishes to change the
CC1/CC2 values. This control is used for TCPM-TCPC implementing
Source or Sink only as well as when a connection has been detected
via DRP toggling but the TCPM wishes to attempt Try.Src or Try.Snk.

Table 4-22. CC_STATUS Register Definition:
If (ROLE_CONTROL.CC1 = Rd) or ConnectResult=1)
00b: SNK.Open (Below maximum vRa)
01b: SNK.Default (Above minimum vRd-Connect)
10b: SNK.Power1.5 (Above minimum vRd-Connect) Detects Rp-1.5A
11b: SNK.Power3.0 (Above minimum vRd-Connect) Detects Rp-3.0A

If (ROLE_CONTROL.CC2=Rd) or (ConnectResult=1)
00b: SNK.Open (Below maximum vRa)
01b: SNK.Default (Above minimum vRd-Connect)
10b: SNK.Power1.5 (Above minimum vRd-Connect) Detects Rp 1.5A
11b: SNK.Power3.0 (Above minimum vRd-Connect) Detects Rp 3.0A

Fixes: 74e656d6b0551 ("staging: typec: Type-C Port Controller Interface driver (tcpci)")
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20210304070931.1947316-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix tx_empty condition

[ Upstream commit 3db1d52466dc11dca4e47ef12a6e6e97f846af62 ]

In "tx_empty", we should poll TC bit in both DMA and PIO modes (instead of
TXE) to check transmission data register has been transmitted independently
of the FIFO mode. TC indicates that both transmit register and shift
register are empty. When shift register is empty, tx_empty should return
TIOCSER_TEMT instead of TC value.

Cleans the USART_CR_TC TCCF register define (transmission complete clear
flag) as it is duplicate of USART_ICR_TCCF.

Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-13-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: add FIFO flush when port is closed

[ Upstream commit 9f77d19207a0e8ba814c8ceb22e90ce7cb2aef64 ]

Transmission complete error is sent when ISR_TC is not set. If port closure
is requested despite data in TDR / TX FIFO has not been sent (because of
flow control), ISR_TC is not set and error message is sent on port closure
but also when a new port is opened.

Flush the data when port is closed, so the error isn't printed twice upon
next port opening.

Fixes: 64c32eab6603 ("serial: stm32: Add support of TC bit status check")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-12-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix FIFO flush in startup and set_termios

[ Upstream commit 315e2d8a125ad77a1bc28f621162713f3e7aef48 ]

Fifo flush set USART_RQR register by calling stm32_usart_set_bits
routine (Read/Modify/Write). USART_RQR register is a write only
register. So, read before write isn't correct / relevant to flush
the FIFOs.
Replace stm32_usart_set_bits call by writel_relaxed.

Fixes: 84872dc448fe ("serial: stm32: add RX and TX FIFO flush")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-11-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: call stm32_transmit_chars locked

[ Upstream commit f16b90c2d9db3e6ac719d1946b9d335ca4ab33f3 ]

stm32_transmit_chars should be called under lock also in tx DMA callback.

Fixes: 3489187204eb ("serial: stm32: adding dma support")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-10-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix tx dma completion, release channel

[ Upstream commit fb4f2e04ac13e7c400e6b86afbbd314a5a2a7e8d ]

This patch add a proper release of dma channels when completing dma tx.

Fixes: 3489187204eb ("serial: stm32: adding dma support")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-9-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix a deadlock in set_termios

[ Upstream commit 436c97936001776f16153771ee887f125443e974 ]

CTS/RTS GPIOs support that has been added recently to STM32 UART driver has
introduced scheduled code in a set_termios part protected by a spin lock.
This generates a potential deadlock scenario:

Chain exists of:
&irq_desc_lock_class --> console_owner --> &port_lock_key

Possible unsafe locking scenario:

     CPU0                    CPU1
     ----                    ----
lock(&port_lock_key);
                           lock(console_owner);
                           lock(&port_lock_key);
lock(&irq_desc_lock_class);

*** DEADLOCK ***
4 locks held by stty/766:

Move the scheduled code after the spinlock.

Fixes: 6cf61b9bd7cc ("tty: serial: Add modem control gpio support for STM32 UART")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-8-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix wake-up flag handling

[ Upstream commit 12761869f0efa524348e2ae31827fd52eebf3f0d ]

This patch fixes several issue with wake-up handling:
- the WUF irq is handled several times at wake-up
- the USART is disabled / enabled at suspend to set wake-up flag.
It can cause glitches during RX.

This patch fix those issues:
- clear wake-up flag and disable wake-up irq in WUF irq handling
- enable wake-up from low power on start bit detection at port
configuration
- Unmask the wake-up flag irq at suspend and mask it at resume

In addition, pm_wakeup_event handling is moved from receice_chars to WUF
irq handling.

Fixes: 270e5a74fe4c ("serial: stm32: add wakeup mechanism")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-7-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>