[media] radio-tea5777: use library for 64bits div

drivers/built-in.o: In function `radio_tea5777_set_freq':
radio-tea5777.c:(.text+0x4d8704): undefined reference to `__udivdi3'

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: dib0700, remove double \n's from log

err() already adds \n to the end of the format string. So remove one
more \n from formatting strings in the dib0700 driver.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l: Add missing compatibility definitions for bounds rectangles

Compatibility defines for ACTUAL subdev selection rectangles were added and
also the name of the BOUNDS rectangles was changed in the process, which,
alas, went unnoticed until now. Add compatibility definitions for these
rectangles.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Add support for the Terratec Cinergy T Dual PCIe IR remote

The following patch adds support for the infrared remote included in
the Terratec Cinergy T Dual PCIe card.

Signed-off-by: Djuri Baars <dsbaars@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx18: Declare MODULE_FIRMWARE usage

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pvrusb2: Declare MODULE_FIRMWARE usage

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx23885: Declare MODULE_FIRMWARE usage

Cc: Steven Toth <stoth@kernellabs.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Declare MODULE_FIRMWARE usage

Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ivtv: Declare MODULE_FIRMWARE usage

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25840: Declare MODULE_FIRMWARE usage

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] omap3isp: #include videodev2.h in omap3isp.h

include/linux/omap3isp.h uses BASE_VIDIOC_PRIVATE from include/linux/videodev2.h
but didn't include this file.

Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] s5k6aa: Add missing static storage class specifier

Fixes the following sparse warning:
drivers/media/video/s5k6aa.c:1439:5: warning:
symbol 's5k6aa_check_fw_revision' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tlg2300: Declare MODULE_FIRMWARE usage

Cc: Huang Shijie <shijie8@gmail.com>
Cc: Kang Yong <kangyong@telegent.com>
Cc: Zhang Xiaobing <xbzhang@telegent.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: linux-media@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Huang Shijie <shijie8@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] lgs8gxx: Declare MODULE_FIRMWARE usage

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] xc5000: Add MODULE_FIRMWARE statements

This will make modinfo more useful with regard
to discovering necessary firmware files.

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Michael Krufky <mkrufky@kernellabs.com>
Cc: Eddi De Pieri <eddi@depieri.net>
Cc: linux-media@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] s2255drv: Add MODULE_FIRMWARE statement

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Dean Anderson <linux-dev@sensoray.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib8000: move dereference after check for NULL

My static checker complains that we dereference "state" inside the call
to fft_to_mode() before checking for NULL.  The comments say that it is
possible for "state" to be NULL so I have moved the dereference after
the check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Documentation: Update cardlists

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] bttv: add support for Aposonic W-DVR

Forwarded-by: Gerd Hoffmann <kraxel@bytesex.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821: Remove bad strcpy to read-only char*

The strcpy was being used to set the name of the board.
This was both wrong and redundant,
since the destination char* was read-only and
the name is set statically at compile time.

The type of the name field is changed to const char*
to prevent future errors.

Reported-by: Radek Masin <radek@masin.eu>
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pms.c: remove duplicated include

Signed-off-by: Duan Jiong <djduanjiong@gmail.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] smiapp-core.c: remove duplicated include

Signed-off-by: Duan Jiong <djduanjiong@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] via-camera: pass correct format settings to sensor

The code attempts to maintain a "user format" and a "sensor format",
but in this case it looks like a typo is passing the user format down
to the sensor.

This was preventing display of video at anything other than 640x480.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rtl2832.c: minor cleanup

The current formulation of the bw_params loop uses the counter j as an
index for the first dimension of the bw_params array which is later
incremented by the variable i. It is evaluated correctly only, because j
is initialized to 0 at the beginning of the loop. I think that
explicitly using the index 0 better reflects the intent of the
expression.

Signed-off-by: Hans-Frieder Vogt <hfvogt@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Add support for the IguanaWorks USB IR Transceiver

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Minor cleanups for MCE USB

Signed-off-by: Sean Young <sean@mess.org>
Cc: Jarod Wilson <jarod@wilsonet.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media/dvb/siano/smscoreapi.c: use list_for_each_entry

Use list_for_each_entry and perform some other induced simplifications.

The semantic match that finds the opportunity for this reorganization is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
struct list_head *pos;
struct list_head *head;
statement S;
@@

*for (pos = (head)->next; pos != (head); pos = pos->next)
S
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Use a named union in struct v4l2_ioctl_info

Hi Mauro,

struct v4l2_ioctl_info uses an anonymous union, which is initialized
in the v4l2_ioctls table.

Unfortunately gcc < 4.6 uses a non-standard syntax for that, so trying to
compile v4l2-ioctl.c with an older gcc will fail.

It is possible to work around this by testing the gcc version, but in this
case it is easier to make the union named since it is used in only a few
places.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mceusb: Add Twisted Melon USB IDs

Add USB identifiers for MCE compatible I/R transceivers from Twisted Melon.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media/solo6x10: use module_pci_driver macro

the driver duplicates the module_pci_driver code,
how?
module_pci_driver is used for those drivers whose
init and exit paths does only register and unregister
to pci API and nothing else.

so use the module_pci_driver macro instead

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Acked-by: Ismael Luceno <ismael.luceno@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media/dt3155v4l: use module_pci_driver macro

the driver duplicates the module_pci_driver code,
remove the duplicate code and use the module_pci_driver macro.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] lirc: fix non-ANSI function declaration warning

Sparse is warning about non-ANSI function declaration.
Add void to the parameterless function.

drivers/staging/media/lirc/lirc_bt829.c:174:22: warning:
non-ANSI function declaration of function 'poll_main'

Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: ati_remote.c: code style fixing

changes:
1. wrap some lines that are longer than 80 characters.
2. remove local function prototype declarations which do not
   need.
3. replace TAB character with a space character in function
   comments.

Signed-off-by: Du, Changbin <changbin.du@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Avoid sysfs oops when an rc_dev's raw device is absent

For some reason, when the lirc daemon learns that a usb remote control
has been unplugged, it wants to read the sysfs attributes of the
disappearing device. This is useful for uncovering transient
inconsistencies, but less so for keeping the system running when such
inconsistencies exist.

Under some circumstances (like every time I unplug my dvb stick from
my laptop), lirc catches an rc_dev whose raw event handler has been
removed (presumably by ir_raw_event_unregister), and proceeds to
interrogate the raw protocols supported by the NULL pointer.

This patch avoids the NULL dereference, and ignores the issue of how
this state of affairs came about in the first place.

Version 2 incorporates changes recommended by Mauro Carvalho Chehab
(-ENODEV instead of -EINVAL, and a signed-off-by).

Signed-off-by: Douglas Bagnall <douglas@paradise.net.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2-dev.c: Move video_put() after debug printk

It is possible that video_put() releases video_device struct,
provoking a panic when debug printk wants to get video_device node name.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] vivi: fix a few format-related compliance issues

This patch will always set the field to INTERLACED (this fixes a bug were a driver should
never return FIELD_ANY), and will default to YUYV pixelformat if an unknown pixelformat
was specified.

This way S/TRY_FMT will always return a valid format struct.

Regards,

Hans

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/staging/media/easycap/easycap_main.c: add missing usb_free_urb

Add missing usb_free_urb on failure path after usb_alloc_urb.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@km exists@
local idexpression e;
expression e1,e2,e3;
type T,T1;
identifier f;
@@

* e = usb_alloc_urb(...)
... when any
    when != e = e1
    when != e1 = (T)e
    when != e1(...,(T)e,...)
    when != &e->f
if(...) { ... when != e2(...,(T1)e,...)
                 when != e3 = e
                 when forall
(
             return <+...e...+>;
|
*             return ...;
) }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] az6007: fix incorrect memcpy

Some parts of the C language are subtle and evil. This is one example.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44041

Reported-by: dcb314@hotmail.com
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821,medusa: incorrect check on decoder type

Unsupported requests should be ignored but in fact affected VDEC_A

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44051

Reported-by: dcb314@hotmail.com
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Palash Bandyopadhyay <Palash.Bandyopadhyay@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ov9640: fix missing break

Without this rev2 ends up behaving as rev3

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44081

Reported-by: dcb314@hotmail.com
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpbe: fix build error when CONFIG_VIDEO_ADV_DEBUG is enabled

Fix build error when CONFIG_VIDEO_ADV_DEBUG is enabled,
declare the vpbe_dev variable.

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l: fix copy/paste typo in vb2_reqbufs comment

Signed-off-by: Nicolas Thery <nicolas.thery@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-xc2028: unlock on error in xc2028_get_afc()

We need to do a mutex_unlock(&priv->lock) before returning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Documentation: Add newline at end-of-file to files lacking one

This patch simply adds a newline character at end-of-file to those
files in Documentation/ that currently lack one.

This is done for a few different reasons:

A) It's rather annoying when you do "cat some_file.txt" that your
   prompt/cursor ends up at the end of the last line of output rather
   than on a new line.

B) Some tools that process files line-by-line may get confused by the
   lack of a newline on the last line.

C) The "\ No newline at end of file" line in diffs annoys me for some
   reason.

So, let's just add the missing newline once and for all.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpbe: fix check for s_dv_preset function pointer

fix check for s_dv_preset function pointer to be NULL.
return -EINVAL if function pointer is NULL.

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-xc2028: fix "=" vs "==" typo

We intended to do a compare here, not an assignment.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] vivi: remove pointless video_nr++

Remove the pointless video_nr++. It doesn't do anything useful and it has
the unexpected side-effect of changing the video_nr module option, so
cat /sys/module/vivi/parameters/video_nr gives a different value back
then what was specified with modprobe.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l: DocBook: VIDIOC_CREATE_BUFS: add hyperlink

Signed-off-by: Nicolas Thery <nicolas.thery@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-si470x: Add support for the new band APIs

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-si470x: Fix band selection

The mask was wrong resulting in band 0 and 1 always ending up as band 0
in the register.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-si470x: restore ctrl settings after suspend/resume

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2: Add rangelow and rangehigh fields to the v4l2_hw_freq_seek struct

To allow apps to limit a hw-freq-seek to a specific band, for further
info see the documentation this patch adds for these new fields.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-cadet: implement frequency band enumeration

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-cadet: fix RDS handling

The current RDS code suffered from bit rot. Clean it up and make it work again.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-cadet: upgrade to latest frameworks

- add control framework
- use core locking
- use V4L2_TUNER_CAP_LOW
- remove volume support: there is no hardware volume control

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2 spec: add VIDIOC_ENUM_FREQ_BANDS documentation

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2: add core support for the new VIDIOC_ENUM_FREQ_BANDS ioctl

This adds the usual core support code for this new ioctl.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] videodev2.h: add VIDIOC_ENUM_FREQ_BANDS

Add a new ioctl to enumerate the supported frequency bands of a tuner.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l: DocBook: fix version number typo

Signed-off-by: Nicolas Thery <nicolas.thery@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tvp5150: signedness bug in tvp5150_selmux()

tvp5150_read() returns negative error codes so this needs to be an int
for the error handling to work.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] videobuf-dma-contig: Use NULL instead of plain integer

Fixes the following sparse warning:
drivers/media/video/videobuf-dma-contig.c:59:46:
warning: Using plain integer as NULL pointer

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-si470x: Lower firmware version requirements

Testing with a firmware version 12 usb radio stick has shown version 12
to work fine too.

Reported-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] adv7180.c: convert to v4l2 control framework

[mchehab@redhat.com: fix checkpatch.pl ERROR:
 Macros with complex values should be enclosed in parenthesis]

Signed-off-by: Federico Vaga <federico.vaga@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Fix DV_TIMINGS_CAP documentation

This patch fixes the DV_TIMINGS_CAP documentation: part of it was copy-and-paste from
the ENUM_DV_TIMINGS documentation.

Regards,

Hans

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: Use NULL pointer instead of plain integer in v4l2-ctrls.c file

Fixes the following sparse warning:
drivers/media/video/v4l2-ctrls.c:2123:43: warning: Using plain integer as NULL pointer

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media/video: vpif: fixed vpfe->vpif typo

Signed-off-by: Dror Cohen <dror@liveu.tv>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821: Replace struct memcpy with struct assignment

Copying structs by assignment is type safe.
Plus, is shorter and easier to read.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Replace struct memcpy with struct assignment

Copying structs by assignment is type safe.
Plus, is shorter and easier to read.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx23885: Replace struct memcpy with struct assignment

Copying structs by assignment is type safe.
Plus, is shorter and easier to read.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7164: Replace struct memcpy with struct assignment

Copying structs by assignment is type safe.
Plus, is shorter and easier to read.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7164: Remove unused saa7164_call_i2c_clients()

This function has no users, so it's safe to remove it.
Tested by compilation only.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821: Remove useless struct i2c_algo_bit_data

The field 'struct i2c_algo_bit_data i2c_algo' is wrongly confused with
struct i2c_algorithm. Moreover, i2c_algo field is not used since
i2c is registered using i2c_add_adpater() and not i2c_bit_add_bus().
Therefore, it's safe to remove it.
Tested by compilation only.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Remove useless struct i2c_algo_bit_data

The field 'struct i2c_algo_bit_data i2c_algo' is wrongly confused with
struct i2c_algorithm. Moreover, i2c_algo field is not used since
i2c is registered using i2c_add_adpater() and not i2c_bit_add_bus().
Therefore, it's safe to remove it.
Tested by compilation only.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx23885: Remove useless struct i2c_algo_bit_data

The field 'struct i2c_algo_bit_data i2c_algo' is wrongly confused with
struct i2c_algorithm. Moreover, i2c_algo field is not used since
i2c is registered using i2c_add_adpater() and not i2c_bit_add_bus().
Therefore, it's safe to remove it.
Tested by compilation only.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7164: Remove useless struct i2c_algo_bit_data

The field 'struct i2c_algo_bit_data i2c_algo' is wrongly confused with
struct i2c_algorithm. Moreover, i2c_algo field is not used since
i2c is registered using i2c_add_adpater() and not i2c_bit_add_bus().
Therefore, it's safe to remove it.
Tested by compilation only.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Feature removal: using capture and output capabilities for m2m devices

Identifying a memory-to-memory video device through an ORed output and
capture capability flags is not reliable. Schedule this for removal.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: Add capability flags for memory-to-memory devices

This patch adds new V4L2_CAP_VIDEO_M2M and V4L2_CAP_VIDEO_M2M_MPLANE
capability flags that are intended to be used for memory-to-memory (M2M)
devices, instead of ORed V4L2_CAP_VIDEO_CAPTURE and V4L2_CAP_VIDEO_OUTPUT.

V4L2_CAP_VIDEO_M2M flag is added at the drivers, CAPTURE and OUTPUT
capability flags are left untouched and will be removed in future,
after a transition period required for existing applications to be
adapted to check only for V4L2_CAP_VIDEO_M2M.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Kamil Debski <k.debski@samsung.com>
Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] m5mols: Correct reported ISO values

The V4L2_CID_ISO_SENSITIVITY control menu values should be
standard ISO values multiplied by 1000. Multiply all menu
items by 1000 so ISO is properly reported as 50...3200 range.

This applies to kernels 3.5+.

Cc: stable@vger.kernel.org
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] s5p-fimc: Use switch statement for better readability

Use switch statement rather than multiple 'else if'.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] s5p-fimc: Replace custom err() macro with v4l2_err() macro

Replace custom err() macro with v4l2_err() macro.

[s.nawrocki: added missing end-of-line at the log print]

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] s5p-fimc: Remove V4L2_FL_LOCK_ALL_FOPS flag

This patch adds locking for open(), close(), poll() and mmap()
file operations in the driver as a follow up to the changes
done in commit 5126f2590bee412e3053de851cb07f531
"v4l2-dev: add flag to have the core lock all file operations".

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2-dev: G_PARM was incorrectly enabled for all video nodes

G_PARM should only be enabled if:

- vidioc_g_parm is present
- or: it is a video node and vidioc_g_std or tvnorms are set.

Without this additional check v4l2-compliance would complain about
being able to use g_parm when it didn't expect it.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mem2mem_testdev: set default size and fix colorspace

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mem2mem_testdev: add control events support

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2-mem2mem: support events in v4l2_m2m_poll

v4l2_m2m_poll didn't support events, but that's essential if you want to
be able to use control events for example.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mem2mem_testdev: set bus_info and device_caps

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mem2mem_testdev: convert to the control framework and v4l2_fh

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tw9910: Don't access the device in the g_mbus_fmt operation

The g_mbus_fmt operation only needs to return the current mbus frame
format and doesn't need to configure the hardware to do so. Fix it to
avoid requiring the chip to be powered on when calling the operation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ov772x: Don't access the device in the g_mbus_fmt operation

The g_mbus_fmt operation only needs to return the current mbus frame
format and doesn't need to configure the hardware to do so. Fix it to
avoid requiring the chip to be powered on when calling the operation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ov2640: Don't access the device in the g_mbus_fmt operation

The g_mbus_fmt operation only needs to return the current mbus frame
format and doesn't need to configure the hardware to do so. Fix it to
avoid requiring the chip to be powered on when calling the operation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] soc-camera: Pass the physical device to the power operation

There will be no soc_camera_device instance with a soc-camera device is
used with a non soc-camera host, so we won't be able to pass the
soc_camera_device fake platform device to board code. Pass the physical
device instead.

The argument is currently not used by any board file so this is safe.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] soc-camera: Don't fail at module init time if no device is present

The soc-camera module exports functions that are needed by soc-camera
client drivers even when not running in soc-camera mode. Replace the
platform_driver_probe() with a platform_driver_register() call to avoid
module load failures if no soc-camera device is present.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2-ioctl.c: zero the v4l2_dv_timings_cap struct

Zero all fields after the first type field.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2-dev: forgot to add VIDIOC_DV_TIMINGS_CAP

The VIDIOC_DV_TIMINGS_CAP ioctl check wasn't added to determine_valid_ioctls().
This caused this ioctl to always return -ENOTTY.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpif: Enable selection of the ADV7343 and THS7303

The auto selection of pertinent helper chips (VIDEO_HELPER_CHIPS_AUTO)
should select the ADV7343 and THS7303 driver, which is used by VPIF
display driver.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpif: add build configuration for vpif drivers

add generic build configuration for vpif capture
and display drivers as it is common for DM6467/DA850/OMAP-L138.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpif: Add suspend/resume callbacks to vpif driver

add clock enable and disable in probe and remove functions.
Probe will succeed only if the device clock is provided instead of
assuming that the clock is always enabled. VPIF clock has to be
dealt with during suspend and resume. Implement power management
callbacks to VPIF driver to disable/enable clock on suspend/resume
respectively.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpif capture:Add power management support

Implement power management operations - suspend and resume as part of
dev_pm_ops for VPIF capture driver.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpif display: Add power management support

Implement power management operations - suspend and resume as part of
dev_pm_ops for VPIF display driver.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpif: add support for clipping on output data

add hardware clipping support for VPIF output data. This
is needed as it is possible that the external encoder
might get confused between the FF or 00 which are a part
of the data and that of the SAV or EAV codes.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>