Daniel Wagner [Mon, 22 Aug 2011 11:16:02 +0000 (13:16 +0200)]
session: Initialize service hash correctly
Samuel Ortiz [Tue, 23 Aug 2011 14:28:04 +0000 (16:28 +0200)]
service: Identation fix
Patrik Flykt [Mon, 22 Aug 2011 10:44:28 +0000 (13:44 +0300)]
service: Save ipconfig in states where ipconfig is set up
Service states unknown, idle and association do not have
valid ipconfig data configured. Do not save it in these states.
Patrik Flykt [Mon, 22 Aug 2011 10:44:27 +0000 (13:44 +0300)]
network: Re-read ipconfig from service when setting manual addresses
When a service was disconnected, its ipconfig data was cleared.
Re-read service ipconfig data before setting manual addresses.
Fixes BMC#17738
Patrik Flykt [Mon, 22 Aug 2011 10:44:26 +0000 (13:44 +0300)]
service: Factor out reading ipconfigs from create functions
Create new read functions for IPv4 and IPv6 from the code in
__connman_service_create_ip*config functions.
Jukka Rissanen [Thu, 18 Aug 2011 07:07:51 +0000 (10:07 +0300)]
connection: Fix IPv6 host route setting when using VPN
Jukka Rissanen [Thu, 18 Aug 2011 07:07:50 +0000 (10:07 +0300)]
connection: Fix indentation
Samuel Ortiz [Wed, 17 Aug 2011 15:32:53 +0000 (17:32 +0200)]
loopback: Remove dead code
Samuel Ortiz [Wed, 17 Aug 2011 15:27:03 +0000 (17:27 +0200)]
service: Propagate user proxy changes
Notify proxy_changed listeners when Proxy.Configuration is set/changed.
Patrik Flykt [Wed, 17 Aug 2011 09:47:05 +0000 (12:47 +0300)]
service: Properly disconnect network or provider on connect failure
Correctly check whether a service has a network or a VPN provider
associated with it if the service fails already in
__connman_service_connect().
Yu A Wang [Wed, 17 Aug 2011 08:04:32 +0000 (04:04 -0400)]
task: Reset forked process signal mask
The forked process inherits connmand's signal mask and thus has TERM and
INT blocked. As a consequence it can not be killed properly if the signal
mask is not reset.
Yu A Wang [Wed, 17 Aug 2011 08:04:18 +0000 (04:04 -0400)]
connection: Fix vpn on networks without gateway
VPN establishment fails on gateway less networks, like for example ppp
based cellular ones. To fix that, a host route to the VPN server is
established.
Yu A Wang [Fri, 12 Aug 2011 06:43:26 +0000 (02:43 -0400)]
service: Fix wrong DNS server ip after VPN connection
We need to call default_changed function for ONLINE state after
profile changed, else get_default function will return the previous
service, this will lead to we have wrong DNS after VPN connection
Yu A Wang [Fri, 12 Aug 2011 06:42:16 +0000 (02:42 -0400)]
connection: Set proper gateway for ppp links
The default gateway for ppp connection should be 0.0.0.0 for ipv4
and :: for ipv6. This issue fixed before but removed by the commit
84a739d0082b89efa8cfbf376abe17937e4bc843
Marcel Holtmann [Tue, 16 Aug 2011 16:14:53 +0000 (09:14 -0700)]
plugin: Use weak reference for external debug statements
Marcel Holtmann [Mon, 15 Aug 2011 23:22:31 +0000 (16:22 -0700)]
plugin: Use simpler version mismatch error
Marcel Holtmann [Mon, 15 Aug 2011 23:08:26 +0000 (16:08 -0700)]
plugin: Add debug support for external plugins
Marcel Holtmann [Mon, 15 Aug 2011 23:07:28 +0000 (16:07 -0700)]
log: Use separate function for enable logging
Daniel Wagner [Thu, 11 Aug 2011 14:56:18 +0000 (16:56 +0200)]
manager: Defer return of setting session mode if not idle
Daniel Wagner [Thu, 11 Aug 2011 14:56:18 +0000 (16:56 +0200)]
notify: Add state_idle()
Daniel Wagner [Thu, 11 Aug 2011 14:56:18 +0000 (16:56 +0200)]
session: Allways allow set session mode
If the unit test framework crashes it can happen that the session mode
is still enabled but we have a connected service. So if the unit test
restarted we wont disconnect all services and therefore block for
ever. Since it is safe to call __connman_service_disconnect_all()
again there is no need to disallow this operation.
Daniel Wagner [Thu, 11 Aug 2011 14:56:18 +0000 (16:56 +0200)]
session: Fix empty service name
(gdb) bt
#0 __strlen_sse2 () at ../sysdeps/x86_64/strlen.S:32
#1 0x0000003a5ee2810b in marshal_string (pos_after=0x7fffffffdd80, byte_order=108, value=0x0,
insert_at=20, str=0x6bcc50) at dbus-marshal-basic.c:778
#2 _dbus_marshal_write_basic (str=0x6bcc50, insert_at=20, type=<optimized out>,
value=<optimized out>, byte_order=108, pos_after=0x7fffffffdd80)
at dbus-marshal-basic.c:858
#3 0x0000003a5ee15f29 in _dbus_type_writer_write_basic_no_typecode (value=<optimized out>,
type=115, writer=0x7fffffffdd60) at dbus-marshal-recursive.c:1589
#4 _dbus_type_writer_write_basic_no_typecode (value=<optimized out>, type=115, writer=
0x7fffffffdd60) at dbus-marshal-recursive.c:2736
#5 _dbus_type_writer_write_basic (writer=0x7fffffffdd60, type=115, value=<optimized out>)
at dbus-marshal-recursive.c:2311
#6 0x0000003a5ee19c1a in dbus_message_iter_append_basic (value=0x7fffffffde58, type=115, iter=
0x7fffffffdd50) at dbus-message.c:2563
#7 dbus_message_iter_append_basic (iter=0x7fffffffdd50, type=115, value=0x7fffffffde58)
at dbus-message.c:2506
#8 0x00000000004597ed in connman_dbus_property_append_basic (iter=0x7fffffffddd0, key=
0x479539 "Name", type=115, val=0x7fffffffde58) at src/dbus.c:123
#9 0x000000000045e11b in connman_dbus_dict_append_basic (dict=0x7fffffffdea0, key=
0x479539 "Name", type=115, val=0x7fffffffde58) at ./include/connman/dbus.h:112
#10 0x000000000045e8ab in append_notify (dict=0x7fffffffdea0, session=0x6d4580)
at src/session.c:375
#11 0x000000000045ecf6 in session_notify (user_data=0x6d4580) at src/session.c:498
#12 0x000000000045f885 in session_changed (session=0x6d4580, trigger=
CONNMAN_SESSION_TRIGGER_SERVICE) at src/session.c:954
#13 0x0000000000460f66 in service_add (service=0x6b4880, name=0x0) at src/session.c:1602
#14 0x0000000000447946 in __connman_notifier_service_add (service=0x6b4880, name=0x0)
at src/notifier.c:413
#15 0x0000000000442fa1 in __connman_service_create_from_network (network=0x6b4af0)
at src/service.c:4921
#16 0x00000000004332e4 in network_probe (network=0x6b4af0) at src/network.c:167
#17 0x0000000000433d32 in connman_network_set_group (network=0x6b4af0, group=
0x699ae0 "hidden_managed_psk") at src/network.c:544
#18 0x000000000041c4a5 in network_added (supplicant_network=0x69cab0) at plugins/wifi.c:856
#19 0x000000000041d39c in callback_network_added (network=0x69cab0)
at gsupplicant/supplicant.c:396
#20 0x000000000041e878 in add_bss_to_network (bss=0x6a68c0) at gsupplicant/supplicant.c:1023
#21 0x000000000041efa1 in bss_property (key=0x0, iter=0x0, user_data=0x6a68c0)
at gsupplicant/supplicant.c:1205
#22 0x000000000041f5f9 in interface_bss_added_with_keys (iter=0x7fffffffe300, user_data=
0x6a70a0) at gsupplicant/supplicant.c:1354
#23 0x0000000000420689 in signal_bss_added (path=
0x6b7818 "/fi/w1/wpa_supplicant1/Interfaces/39", iter=0x7fffffffe300)
at gsupplicant/supplicant.c:1783
#24 0x0000000000420cf9 in g_supplicant_filter (conn=0x699770, message=0x6a6b20, data=0x0)
at gsupplicant/supplicant.c:1998
#25 0x0000003a5ee0f926 in dbus_connection_dispatch (connection=0x699770)
at dbus-connection.c:4647
#26 0x000000000040c4ab in message_dispatch (data=0x699770) at gdbus/mainloop.c:80
#27 0x0000003edf64410b in g_timeout_dispatch (source=<optimized out>,
callback=<optimized out>, user_data=<optimized out>) at gmain.c:3895
#28 0x0000003edf6427ed in g_main_dispatch (context=0x698100) at gmain.c:2441
#29 g_main_context_dispatch (context=0x698100) at gmain.c:3014
#30 0x0000003edf642fc8 in g_main_context_iterate (context=0x698100, block=<optimized out>,
dispatch=1, self=<optimized out>) at gmain.c:3092
#31 0x0000003edf64360d in g_main_loop_run (loop=0x6980c0) at gmain.c:3300
#32 0x000000000042eab6 in main (argc=1, argv=0x7fffffffe6b8) at src/main.c:381
(gdb) f 10
#10 0x000000000045e8ab in append_notify (dict=0x7fffffffdea0, session=0x6d4580)
at src/session.c:375
375 connman_dbus_dict_append_basic(dict, "Name",
(gdb) l
370 ifname = info->entry->ifname;
371 service = info->entry->service;
372 bearer = info->entry->bearer;
373 }
374
375 connman_dbus_dict_append_basic(dict, "Name",
376 DBUS_TYPE_STRING,
377 &name);
378
379 connman_dbus_dict_append_dict(dict, "IPv4",
Daniel Wagner [Thu, 11 Aug 2011 14:56:18 +0000 (16:56 +0200)]
session: Free ifname
connman_inet_ifname() returns strdup() string.
Daniel Wagner [Thu, 11 Aug 2011 14:56:18 +0000 (16:56 +0200)]
session: Insert service_entry into service_list
When an element is removed from the list, the element will be passed
to destroy_service_entry() which expects only elements of type struct
service_entry.
Daniel Wagner [Thu, 11 Aug 2011 14:56:18 +0000 (16:56 +0200)]
notify: Add service name parameter to service_add()
Daniel Wagner [Thu, 11 Aug 2011 14:56:18 +0000 (16:56 +0200)]
session: Fix invalid session_hash in cleanup path
Daniel Wagner [Thu, 11 Aug 2011 14:56:18 +0000 (16:56 +0200)]
session: Service changed cleanup
Daniel Wagner [Thu, 11 Aug 2011 14:56:18 +0000 (16:56 +0200)]
session: Track reason on a session level
We need to track the Connect()/Disconnect() on a global session level
and not only in the info. This is needed when we were not able to
select and connect to a matching service in the first place. It might
happen that a valid service is added in time and then we want to use
it.
Daniel Wagner [Thu, 11 Aug 2011 14:56:17 +0000 (16:56 +0200)]
session: Disconnect on destroy if needed
Daniel Wagner [Thu, 11 Aug 2011 14:56:17 +0000 (16:56 +0200)]
session: Move code
release_session(), session_disconnect(), owner_disconnect() and
destroy_session() have been moved below session_changed. This is
a preperation step for the next patch
Daniel Wagner [Thu, 11 Aug 2011 14:56:17 +0000 (16:56 +0200)]
session: Split test_and_disconnect()
Do split the testing into its own function and also reset the entry
member back before we call __connman_service_disconnect().
This is necessary because calling __connman_serivice_disconnect() we can
end up beeing called session_changed() before we have updated the entry.
Daniel Wagner [Thu, 11 Aug 2011 14:56:17 +0000 (16:56 +0200)]
session: Change is_connected to is_online
Daniel Wagner [Thu, 11 Aug 2011 14:56:17 +0000 (16:56 +0200)]
session: Handle configure state
We should ignore service state (ASSOCIATION, CONFIGURATION) updates
for connecting services (CONNMAN_SESSION_REASON_CONNECT). info->online
will still be false for those services. So don't set the info->reason
CONNMAN_SESSION_REASAON_FREE_RIDE.
Daniel Wagner [Thu, 11 Aug 2011 14:56:17 +0000 (16:56 +0200)]
service: Extend debug message for session refcounting
Daniel Wagner [Thu, 11 Aug 2011 14:56:17 +0000 (16:56 +0200)]
unit: Fix connect disconnect test
Daniel Wagner [Thu, 11 Aug 2011 14:56:17 +0000 (16:56 +0200)]
unit: Add manager state callback
Daniel Wagner [Thu, 11 Aug 2011 14:56:17 +0000 (16:56 +0200)]
unit: Add PropertyChanged watch for Manager
Daniel Wagner [Thu, 11 Aug 2011 14:56:17 +0000 (16:56 +0200)]
unit: Use D-Bus watch for testing ConnMan running
Alok Barsode [Wed, 10 Aug 2011 10:54:32 +0000 (13:54 +0300)]
wifi: Move the wifi helper function to service.c and remove wifi.c.
Zhang Zhengguang [Mon, 8 Aug 2011 09:42:31 +0000 (05:42 -0400)]
service: Create hidden networks with a proper group identifier
hidden_* group identifiers do not match the probe response built ones,
eventually preventing users from being able to reconnect to it.
Jukka Rissanen [Thu, 28 Jul 2011 10:20:28 +0000 (13:20 +0300)]
dhcp: Try to reuse the IP address we had last time.
This fix will cause the DHCP_REQUESTED_IP option to be sent to
the server.
Fixes BMC #21068
Jukka Rissanen [Thu, 28 Jul 2011 10:20:27 +0000 (13:20 +0300)]
ipconfig: Remember last DHCP IP address.
Guillaume Zajac [Fri, 5 Aug 2011 08:51:41 +0000 (10:51 +0200)]
ofono: Improve coding style
Samuel Ortiz [Tue, 9 Aug 2011 10:22:34 +0000 (12:22 +0200)]
Makefile: Remove test-profile from test_scripts
Patrik Flykt [Tue, 9 Aug 2011 07:59:17 +0000 (10:59 +0300)]
service: Fix calling Agent API request input function
Requesting passphrases from the user has been done only when the
ConnectService D-Bus method has been called. As user input may be
needed every time a service is connected, input requesting moved to
__connman_service_connect() instead. Also to note is that the same
service can be retried after a failed connection attempt, for those
cases an already associated service->network needs to be disconnected
before an new connection is attempted.
Patrik Flykt [Tue, 9 Aug 2011 07:59:16 +0000 (10:59 +0300)]
service: When indicating error, also indicate IPv6 state as failed
Set IPv6 ipconfig state to failure in __connman_service_indicate_error().
The return value of the function isn't used for any practical purposes,
therefore always return 0.
Patrik Flykt [Tue, 9 Aug 2011 07:59:15 +0000 (10:59 +0300)]
service: Correctly set 8021X, WEP and PSK passphrases
When returning a passphrase from the Agent API RequestInput method, check
the service security type and set the passphrase accordingly. For WEP and
PSK use __connman_service_set_passphrase() and for 8021X use
__connman_service_set_agent_passphrase(). Print a debug message if the
service security type is none of the three above.
Henri Bragge [Mon, 1 Aug 2011 07:42:51 +0000 (10:42 +0300)]
TODO: EAP-GTC support done, EAP-FAST not making progress
Samuel Ortiz [Mon, 8 Aug 2011 13:09:09 +0000 (15:09 +0200)]
test: Remove test-profile
The profile API being gone for a long time now, test-profile is
irrelevant.
Daniel Wagner [Thu, 4 Aug 2011 15:35:37 +0000 (17:35 +0200)]
wifi: network_remove: Clear network pointer in wifi
When a network is destroyed we also have to remove the pointer
from the wifi data structure.
connmand[25303]: plugins/wifi.c:network_remove() network 0x69c350
connmand[25303]: src/network.c:connman_network_unref() network 0x69c350 name bmwnet02 refcount 1
connmand[25303]: src/network.c:connman_network_unref() network 0x69c350 name bmwnet02 refcount 0
connmand[25303]: src/network.c:network_destruct() network 0x69c350 name XXXXX
[...]
connmand[25303]: plugins/wifi.c:interface_state() wifi 0x699d60 interface state 1
connmand[25303]: plugins/wifi.c:is_idle() state 9
connmand[25303]: src/network.c:connman_network_set_associating() network 0x69c350 associating 0
connmand[25303]: src/network.c:connman_network_set_connected() network 0x69c350 connected 0
Fixes BMC#22307
Daniel Wagner [Thu, 4 Aug 2011 15:35:36 +0000 (17:35 +0200)]
service: Remove __connman_service_reset_from_networks()
This is not needed because there is only 1 network per
service.
Fixes BMC#22078
Yu A Wang [Sat, 30 Jul 2011 03:02:56 +0000 (23:02 -0400)]
ofono: Destroy network_hash when disconnecting
Yu A Wang [Sat, 30 Jul 2011 03:02:42 +0000 (23:02 -0400)]
ofono: Duplicate network path value
Path value will be freed after the function call, this may lead to
can't connect/reconnect to a 3G service
Samuel Ortiz [Wed, 3 Aug 2011 17:04:24 +0000 (19:04 +0200)]
device: Free network after resetting service
After g_hash_table_remove(device->networks, identifier); the previously
cached service pointer can be invalid.
Bug reported by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Marcel Holtmann [Mon, 1 Aug 2011 10:21:09 +0000 (12:21 +0200)]
build: Remove g_dhcp_* from list of exported symbols
Henri Bragge [Thu, 28 Jul 2011 14:20:31 +0000 (17:20 +0300)]
wifi: Use agent provided credentials as a fallback
Henri Bragge [Thu, 28 Jul 2011 14:20:30 +0000 (17:20 +0300)]
service: Store agent provided credentials separately
Add new fields for agent provided identity/passphrase in service struct
(agent_identity/agent_passphrase) and network ("WiFi.AgentIdentity" and
"WiFi.AgentPassphrase").
Preparing these values in prepare_8021x() is left out because the same
thing is done in request_input_cb(), which is where the values always
come from.
Samuel Ortiz [Thu, 28 Jul 2011 15:59:21 +0000 (17:59 +0200)]
network: Remove connman_network_set_pac()
This routine is not used.
Henri Bragge [Thu, 28 Jul 2011 15:22:45 +0000 (18:22 +0300)]
service: Propagate changes of proxy auto-config url over DBus
Henri Bragge [Thu, 28 Jul 2011 15:22:44 +0000 (18:22 +0300)]
service: Enable clearing of proxy auto-config url
This could introduce a need to null-check values where this function
is used (src/dhcp.c, src/network.c, src/provider.c). However, src/dhcp.c
requires that URL can be cleared.
Samuel Ortiz [Thu, 28 Jul 2011 10:18:01 +0000 (12:18 +0200)]
AUTHORS: Mention Bertrand's contributions
Bertrand Aygon [Thu, 28 Jul 2011 10:14:23 +0000 (12:14 +0200)]
ofono: Network name is empty when operator is not available
When the operator is not available and the network name is left to NULL,
the service is built with the hidden flag set.
The operator name will be updated whenever oFono passes it to ConnMan.
Daniel Wagner [Thu, 28 Jul 2011 10:08:40 +0000 (12:08 +0200)]
network: Set driver pointer to NULL back if not ready
The network_probe() function will be called several times until it
creates successfuly the service object.
In the case of the oFono plugin, the connman_device_add_network() is
called after the driver has been registered to the network. Therefore
the network->driver has been set but no device yet.
__connman_service_create_from_network() returns -EINVAL because
the device is not yet set.
The next call on network_probe() will bail out on 'if (network->driver
!= NULL) return -EALREADY;' so we have to reset it in the first round.
Fixes BMC #21705
Thierry Boureille [Thu, 28 Jul 2011 00:35:05 +0000 (02:35 +0200)]
service : Fix put data on null pointer
when using ConnectService of Manager interface a segfault arises due
to a null pointer.
in __connman_service_create_and_connect:
[...]
service = lookup_by_identifier(name);
if (service != NULL)
goto done;
network = create_hidden_wifi(device, ssid, mode, security);
if (network != NULL) {
connman_network_set_group(network, group);
service->network_created = TRUE;
}
[...]
in this part "service" is null
Daniel Wagner [Mon, 25 Jul 2011 14:24:36 +0000 (16:24 +0200)]
network: Fix double free in network_destruct()
Daniel Wagner [Mon, 25 Jul 2011 14:24:40 +0000 (16:24 +0200)]
ofono: Fix network owner ship
Daniel Wagner [Mon, 25 Jul 2011 14:24:39 +0000 (16:24 +0200)]
network: Do not unref network
Daniel Wagner [Mon, 25 Jul 2011 14:24:38 +0000 (16:24 +0200)]
wifi: Fix network owner ship
Daniel Wagner [Mon, 25 Jul 2011 14:24:37 +0000 (16:24 +0200)]
bluetooth: Fix remove device/network
Daniel Wagner [Mon, 25 Jul 2011 14:24:35 +0000 (16:24 +0200)]
device: Reorder cleanup
If free_network is called before the driver->disable() callback
the device has been removed from the networking structure.
Daniel Wagner [Mon, 25 Jul 2011 14:24:34 +0000 (16:24 +0200)]
bluetooth: Unref network objects
The bluetooth plugin creates the network object therefore
it should also unref (destroy) it.
Daniel Wagner [Mon, 25 Jul 2011 14:24:33 +0000 (16:24 +0200)]
device: Change signature of connman_device_remove_network()
Daniel Wagner [Mon, 25 Jul 2011 14:24:32 +0000 (16:24 +0200)]
ethernet: Take ownership of network objects
Therefore destroy network objects when the carrier goes offline.
Daniel Wagner [Mon, 25 Jul 2011 14:24:31 +0000 (16:24 +0200)]
device: Remove needless call to __connman_network_set_device()
Daniel Wagner [Mon, 25 Jul 2011 14:24:30 +0000 (16:24 +0200)]
network: Remove connman_network_register/unregister()
Since the service object doesn't take a reference the
intermediate step of having a connman_network_register/unregister
is not needed. This function are only there to have an additional
step where probe()/remove() will be called. This is the job of
connman_device_add_network()/connman_device_remove_network().
Daniel Wagner [Mon, 25 Jul 2011 14:24:29 +0000 (16:24 +0200)]
service: Don't ref/unref network objects
which were created by the plugins. The hidden wifi
networks will be created by service and therefore
service is the owner of the network objects and
does the unref when the service is destroyed.
Daniel Wagner [Mon, 25 Jul 2011 14:24:28 +0000 (16:24 +0200)]
service: Update network pointer in service
Daniel Wagner [Mon, 25 Jul 2011 14:24:27 +0000 (16:24 +0200)]
device: Fix a inbalance of ref/unref of network objects
The destroy callback of the hash table (device->networks)
will unref and unregister the network object.
Daniel Wagner [Mon, 25 Jul 2011 14:24:26 +0000 (16:24 +0200)]
service: Fix memory leak
valgrind reports that __connman_service_nameservers_remove leaks
memory.
g_strv_length already returns the right size of the new array.
Daniel Wagner [Mon, 25 Jul 2011 14:24:25 +0000 (16:24 +0200)]
dhcp: Fix memory leak
Reported by valgrind.
Daniel Wagner [Mon, 25 Jul 2011 14:37:12 +0000 (16:37 +0200)]
dhcp: Fix cleanup
__connman_dhcp_cleanup() is called early in the shutdown process
(before device or network).
Daniel Wagner [Mon, 25 Jul 2011 14:24:23 +0000 (16:24 +0200)]
network: Stop DHCP
If DHCP has been started for the IPv4 IP configuration we should also
stop it later.
The only place where it has been done so far was in
__connman_network_clear_ipconfig() which is called from
service.c:set_ipconfig(). But this will only be called if the user
changes service settings.
Marcel Holtmann [Sun, 24 Jul 2011 20:51:03 +0000 (22:51 +0200)]
gweb: Fix gnutls_priority_set_direct() for various GnuTLS versions
Jukka Rissanen [Fri, 22 Jul 2011 07:53:48 +0000 (10:53 +0300)]
dnsproxy: Add error print when DNS response send failed.
Julien Massot [Thu, 21 Jul 2011 11:46:39 +0000 (11:46 +0000)]
gsupplicant: set the cipher even if security is WEP
This patch fix an issue with WEP40, i tested it with WEP40 WEP104 and open AP.
It set the group cipher even if security is WEP otherwise connman won't connect to WEP40 service.
Stefan Schmidt [Wed, 20 Jul 2011 14:46:06 +0000 (16:46 +0200)]
iptables: Work around API breakage introduced in iptables 1.4.11
The xtables_merge_options() paramter list got extended without version bump.
These clumsy #ifdef's make it possible to work with newer and older iptables
libraries. It got inspired from an iproute2 patch:
https://bugs.gentoo.org/attachment.cgi?id=276401
Once all distributions start to carry 1.4.11 it can be considered to bump the
minimum version for connman and remove these ifdef's.
Marcel Holtmann [Tue, 19 Jul 2011 22:32:08 +0000 (00:32 +0200)]
Release 0.76
Marcel Holtmann [Tue, 19 Jul 2011 22:24:41 +0000 (00:24 +0200)]
build: Use color output for unit tests
Marcel Holtmann [Tue, 19 Jul 2011 22:22:49 +0000 (00:22 +0200)]
build: Add forgotten binaries to .gitignore
Marcel Holtmann [Tue, 19 Jul 2011 22:20:58 +0000 (00:20 +0200)]
build: Remove wifi-scan testing utility
Tomasz Bursztyka [Tue, 19 Jul 2011 10:56:19 +0000 (13:56 +0300)]
service: wpad only run on ipv4
Grant Erickson [Tue, 19 Jul 2011 00:48:39 +0000 (17:48 -0700)]
service: clear ipconfig data and operations on free
Ensure ipconfig data and operations are cleared out when a service is
freed.
This is at least a partial fix and maybe a full fix for issues 21000
<http://bugs.meego.com/show_bug.cgi?id=21000> and 21285
<http://bugs.meego.com/show_bug.cgi?id=21285>.
Marcel Holtmann [Mon, 18 Jul 2011 08:07:55 +0000 (10:07 +0200)]
build: Remove no longer needed build magic
Marcel Holtmann [Mon, 18 Jul 2011 08:03:29 +0000 (10:03 +0200)]
build: Use BUILT_SOURCES for generating header files
Marcel Holtmann [Sun, 17 Jul 2011 17:39:27 +0000 (19:39 +0200)]
build: Check for signalfd support
Grant Erickson [Fri, 15 Jul 2011 17:21:34 +0000 (10:21 -0700)]
loopback: Recover Loopback on Setup when Up but No Address
It is possible to end up in situations in which the loopback interface
is up but has no valid address. In that case, we expect SIOCGIFADDR
will return EADDRNOTAVAIL and valid_loopback should return FALSE such
that connman can add a loopback address back to the interface.
This is a partial fix for bug 21001
<https://bugs.meego.com/show_bug.cgi?id=21001>.
Grant Erickson [Fri, 15 Jul 2011 17:21:33 +0000 (10:21 -0700)]
loopback: Improve Error Reporting when Recovering Loopback
When fixing up the loopback address or netmask, log what is being
fixed up.
Grant Erickson [Fri, 15 Jul 2011 17:21:32 +0000 (10:21 -0700)]
loopback: Use Existing Loopback Globals Rather than Temporaries
Use preassigned globals for the loopback address and netmask rather
than creating and assigning additional temporaries.
Grant Erickson [Fri, 15 Jul 2011 17:21:31 +0000 (10:21 -0700)]
loopback: Return a More Descriptive Error Code
Return a more descriptive -errno rather than -1 when we fail to create
a socket.
Daniel Wagner [Tue, 12 Jul 2011 14:55:24 +0000 (16:55 +0200)]
service: Do not iterate over NULL service list