Phil Elwell [Tue, 14 Jul 2015 13:32:47 +0000 (14:32 +0100)]
mfd: Add Raspberry Pi Sense HAT core driver
mfd: Add rpi_sense_core of compatible string
Phil Elwell [Thu, 25 Jun 2015 11:16:11 +0000 (12:16 +0100)]
gpio-poweroff: Allow it to work on Raspberry Pi
The Raspberry Pi firmware manages the power-down and reboot
process. To do this it installs a pm_power_off handler, causing
the gpio-poweroff module to abort the probe function.
This patch introduces a "force" DT property that overrides that
behaviour, and also adds a DT overlay to enable and control it.
Note that running in an active-low configuration (DT parameter
"active_low") requires a custom dt-blob.bin and probably won't
allow a reboot without switching off, so an external inversion
of the trigger signal may be preferable.
popcornmix [Mon, 28 Nov 2016 16:50:04 +0000 (16:50 +0000)]
Improve __copy_to_user and __copy_from_user performance
Provide a __copy_from_user that uses memcpy. On BCM2708, use
optimised memcpy/memmove/memcmp/memset implementations.
arch/arm: Add mmiocpy/set aliases for memcpy/set
See: https://github.com/raspberrypi/linux/issues/1082
copy_from_user: CPU_SW_DOMAIN_PAN compatibility
The downstream copy_from_user acceleration must also play nice with
CONFIG_CPU_SW_DOMAIN_PAN.
See: https://github.com/raspberrypi/linux/issues/1381
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
popcornmix [Tue, 2 Jul 2013 23:54:08 +0000 (00:54 +0100)]
Added Device IDs for August DVB-T 205
Phil Elwell [Fri, 6 Feb 2015 13:50:57 +0000 (13:50 +0000)]
BCM270x_DT: Add pwr_led, and the required "input" trigger
The "input" trigger makes the associated GPIO an input. This is to support
the Raspberry Pi PWR LED, which is driven by external hardware in normal use.
N.B. pwr_led is not available on Model A or B boards.
leds-gpio: Implement the brightness_get method
The power LED uses some clever logic that means it is driven
by a voltage measuring circuit when configured as input, otherwise
it is driven by the GPIO output value. This patch wires up the
brightness_get method for leds-gpio so that user-space can monitor
the LED value via /sys/class/gpio/led1/brightness. Using the input
trigger this returns an indication of the system power health,
otherwise it is just whatever value the trigger has written most
recently.
See: https://github.com/raspberrypi/linux/issues/1064
notro [Wed, 9 Jul 2014 12:46:08 +0000 (14:46 +0200)]
BCM2708: Add core Device Tree support
Add the bare minimum needed to boot BCM2708 from a Device Tree.
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
BCM2708: DT: change 'axi' nodename to 'soc'
Change DT node named 'axi' to 'soc' so it matches ARCH_BCM2835.
The VC4 bootloader fills in certain properties in the 'axi' subtree,
but since this is part of an upstreaming effort, the name is changed.
Signed-off-by: Noralf Tronnes notro@tronnes.org
BCM2708_DT: Correct length of the peripheral space
Use dts-dirs feature for overlays.
The kernel makefiles have a dts-dirs target that is for vendor subdirectories.
Using this fixes the install_dtbs target, which previously did not install the overlays.
BCM270X_DT: configure I2S DMA channels
Signed-off-by: Matthias Reichl <hias@horus.com>
BCM270X_DT: switch to bcm2835-i2s
I2S soundcard drivers with proper devicetree support (i.e. not linking
to the cpu_dai/platform via name but to cpu/platform via of_node)
will work out of the box without any modifications.
When the kernel is compiled without devicetree support the platform
code will instantiate the bcm2708-i2s driver and I2S soundcard drivers
will link to it via name, as before.
Signed-off-by: Matthias Reichl <hias@horus.com>
SDIO-overlay: add poll_once-boolean parameter
Add paramter to toggle sdio-device-polling
done every second or once at boot-time.
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
BCM270X_DT: Make mmc overlay compatible with current firmware
The original DT overlay logic followed a merge-then-patch procedure,
i.e. parameters are applied to the loaded overlay before the overlay
is merged into the base DTB. This sequence has been changed to
patch-then-merge, in order to support parameterised node names, and
to protect against bad overlays. As a result, overrides (parameters)
must only target labels in the overlay, but the overlay can obviously target nodes in the base DTB.
mmc-overlay.dts (that switches back to the original mmc sdcard
driver) is the only overlay violating that rule, and this patch
fixes it.
bcm270x_dt: Use the sdhost MMC controller by default
The "mmc" overlay reverts to using the other controller.
squash: Add cprman to dt
BCM270X_DT: Use clk_core for I2C interfaces
BCM270X_DT: Use bcm283x.dtsi, bcm2835.dtsi and bcm2836.dtsi
The mainline Device Tree files are quite close to downstream now.
Let's use bcm283x.dtsi, bcm2835.dtsi and bcm2836.dtsi as base files
for our dts files.
Mainline dts files are based on these files:
bcm2835-rpi.dtsi
bcm2835.dtsi bcm2836.dtsi
bcm283x.dtsi
Current downstream are based on these:
bcm2708.dtsi bcm2709.dtsi bcm2710.dtsi
bcm2708_common.dtsi
This patch introduces this dependency:
bcm2708.dtsi bcm2709.dtsi
bcm2708-rpi.dtsi
bcm270x.dtsi
bcm2835.dtsi bcm2836.dtsi
bcm283x.dtsi
And:
bcm2710.dtsi
bcm2708-rpi.dtsi
bcm270x.dtsi
bcm283x.dtsi
bcm270x.dtsi contains the downstream bcm283x.dtsi diff.
bcm2708-rpi.dtsi is the downstream version of bcm2835-rpi.dtsi.
Other changes:
- The led node has moved from /soc/leds to /leds. This is not a problem
since the label is used to reference it.
- The clk_osc reg property changes from 6 to 3.
- The gpu nodes has their interrupt property set in the base file.
- the clocks label does not point to the /clocks node anymore, but
points to the cprman node. This is not a problem since the overlays
that use the clock node refer to it directly: target-path = "/clocks";
- some nodes now have 2 labels since mainline and downstream differs in
this respect: cprman/clocks, spi0/spi, gpu/vc4.
- some nodes doesn't have an explicit status = "okay" since they're not
disabled in the base file: watchdog and random.
- gpiomem doesn't need an explicit status = "okay".
- bcm2708-rpi-cm.dts got the hpd-gpios property from bcm2708_common.dtsi,
it's now set directly in that file.
- bcm2709-rpi-2-b.dts has the timer node moved from /soc/timer to /timer.
- Removed clock-frequency property on the bcm{2709,2710}.dtsi timer nodes.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
BCM270X_DT: Use raspberrypi-power to turn on USB power
Use the raspberrypi-power driver to turn on USB power.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
BCM270X_DT: Add a .dtbo target, use for overlays
Change the filenames and extensions to keep the pre-DDT style of
overlay (<name>-overlay.dtb) distinct from new ones that use a
different style of local fixups (<name>.dtbo), and to match other
platforms.
The RPi firmware uses the DDTK trailer atom to choose which type of
overlay to use for each kernel.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
BCM270X_DT: Don't generate "linux,phandle" props
The EPAPR standard says to use "phandle" properties to store phandles,
rather than the deprecated "linux,phandle" version. By default, dtc
generates both, but adding "-H epapr" causes it to only generate
"phandle"s, saving some space and clutter.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
BCM270X_DT: Add overlay for enc28j60 on SPI2
Works on SPI2 for compute module
BCM270X_DT: Add midi-uart0 overlay
MIDI requires 31.25kbaud, a baudrate unsupported by Linux. The
midi-uart0 overlay configures uart0 (ttyAMA0) to use a fake clock
so that requesting 38.4kbaud actually gets 31.25kbaud.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
BCM270X_DT: Add i2c-sensor overlay
The i2c-sensor overlay is a container for various pressure and
temperature sensors, currently bmp085 and bmp280. The standalone
bmp085_i2c-sensor overlay is now deprecated.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
BCM270X_DT: overlays/*-overlay.dtb -> overlays/*.dtbo (#1752)
We now create overlays as .dtbo files.
build: support for .dtbo files for dtb overlays
Kernel 4.4.6+ on RaspberryPi support .dtbo files for overlays, instead of .dtb.
Patch the kernel, which has faulty rules to generate .dtbo the way yocto does
Signed-off-by: Herve Jourdain <herve.jourdain@neuf.fr>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
BCM270X: Drop position requirement for CMA in VC4 overlay.
No longer necessary since
2aefcd576195a739a7a256099571c9c4a401005f,
and will probably let peeople that want to choose a larger CMA
allocation (particularly on pi0/1).
Signed-off-by: Eric Anholt <eric@anholt.net>
BCM270X_DT: RPi Device Tree tidy
Use the upstream sdhost node, add thermal-zones, and factor out some
common elements.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
kbuild: Silence unhelpful DTC warnings
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
BCM270X_DT: DT build rules no longer arch-specific
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Noralf Trønnes [Fri, 26 Jun 2015 12:25:01 +0000 (14:25 +0200)]
firmware: bcm2835: Support ARCH_BCM270x
Support booting without Device Tree.
Turn on USB power.
Load driver early because of lacking support for deferred probing
in many drivers.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
firmware: bcm2835: Don't turn on USB power
The raspberrypi-power driver is now used to turn on USB power.
This partly reverts commit:
firmware: bcm2835: Support ARCH_BCM270x
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Noralf Trønnes [Fri, 26 Jun 2015 12:27:06 +0000 (14:27 +0200)]
char: broadcom: Add vcio module
Add module for accessing the mailbox property channel through
/dev/vcio. Was previously in bcm2708-vcio.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
char: vcio: Add compat ioctl handling
There was no compat ioctl handler, so 32 bit userspace on a
64 bit kernel failed as IOCTL_MBOX_PROPERTY used the size
of char*.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
char: vcio: Fail probe if rpi_firmware is not found.
Device Tree is now the only supported config mechanism, therefore
uncomment the block of code that fails the probe if the
firmware node can't be found.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
popcornmix [Wed, 17 Jun 2015 14:44:08 +0000 (15:44 +0100)]
Add Chris Boot's i2c driver
i2c-bcm2708: fixed baudrate
Fixed issue where the wrong CDIV value was set for baudrates below 3815 Hz (for 250MHz bus clock).
In that case the computed CDIV value was more than 0xffff. However the CDIV register width is only 16 bits.
This resulted in incorrect setting of CDIV and higher baudrate than intended.
Example: 3500Hz -> CDIV=0x11704 -> CDIV(16bit)=0x1704 -> 42430Hz
After correction: 3500Hz -> CDIV=0x11704 -> CDIV(16bit)=0xffff -> 3815Hz
The correct baudrate is shown in the log after the cdiv > 0xffff correction.
Perform I2C combined transactions when possible
Perform I2C combined transactions whenever possible, within the
restrictions of the Broadcomm Serial Controller.
Disable DONE interrupt during TA poll
Prevent interrupt from being triggered if poll is missed and transfer
starts and finishes.
i2c: Make combined transactions optional and disabled by default
i2c: bcm2708: add device tree support
Add DT support to driver and add to .dtsi file.
Setup pins in .dts file.
i2c is disabled by default.
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
bcm2708: don't register i2c controllers when using DT
The devices for the i2c controllers are in the Device Tree.
Only register devices when not using DT.
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
I2C: Only register the I2C device for the current board revision
i2c_bcm2708: Fix clock reference counting
Fix grabbing lock from atomic context in i2c driver
2 main changes:
- check for timeouts in the bcm2708_bsc_setup function as indicated by this comment:
/* poll for transfer start bit (should only take 1-20 polls) */
This implies that the setup function can now fail so account for this everywhere it's called
- Removed the clk_get_rate call from inside the setup function as it locks a mutex and that's not ok since we call it from under a spin lock.
i2c-bcm2708: When using DT, leave the GPIO setup to pinctrl
i2c-bcm2708: Increase timeouts to allow larger transfers
Use the timeout value provided by the I2C_TIMEOUT ioctl when waiting
for completion. The default timeout is 1 second.
See: https://github.com/raspberrypi/linux/issues/260
i2c-bcm2708/BCM270X_DT: Add support for I2C2
The third I2C bus (I2C2) is normally reserved for HDMI use. Careless
use of this bus can break an attached display - use with caution.
It is recommended to disable accesses by VideoCore by setting
hdmi_ignore_edid=1 or hdmi_edid_file=1 in config.txt.
The interface is disabled by default - enable using the
i2c2_iknowwhatimdoing DT parameter.
bcm2708-spi: Don't use static pin configuration with DT
Also remove superfluous error checking - the SPI framework ensures the
validity of the chip_select value.
i2c-bcm2708: Remove non-DT support
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Set the BSC_CLKT clock streching timeout to 35ms as per SMBus specs.
Fixes i2c_bcm2708: Write to FIFO correctly - v2 (#1574)
* i2c: fix i2c_bcm2708: Clear FIFO before sending data
Make sure FIFO gets cleared before trying to send
data in case of a repeated start (COMBINED=Y).
* i2c: fix i2c_bcm2708: Only write to FIFO when not full
Check if FIFO can accept data before writing.
To avoid a peripheral read on the last iteration of a loop,
both bcm2708_bsc_fifo_fill and ~drain are changed as well.
popcornmix [Tue, 2 Jul 2013 23:49:20 +0000 (00:49 +0100)]
Add cpufreq driver
Signed-off-by: popcornmix <popcornmix@gmail.com>
bcm2835-cpufreq: Change licence to GPLv2
Signed-off-by: Eben Upton <eben.upton@broadcom.com>
Signed-off-by: Dom Cobley <dom@raspberrypi.com>
Luke Wren [Sat, 5 Sep 2015 00:14:45 +0000 (01:14 +0100)]
Add SMI driver
Signed-off-by: Luke Wren <wren6991@gmail.com>
MISC: bcm2835: smi: use clock manager and fix reload issues
Use clock manager instead of self-made clockmanager.
Also fix some error paths that showd up during development
(especially missing release of dma resources on rmmod)
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
bcm2835_smi: re-add dereference to fix DMA transfers
Luke Wren [Fri, 21 Aug 2015 22:14:48 +0000 (23:14 +0100)]
Add /dev/gpiomem device for rootless user GPIO access
Signed-off-by: Luke Wren <luke@raspberrypi.org>
bcm2835-gpiomem: Fix for ARCH_BCM2835 builds
Build on ARCH_BCM2835, and fail to probe if no IO resource.
See: https://github.com/raspberrypi/linux/issues/1154
Tim Gover [Tue, 22 Jul 2014 14:41:04 +0000 (15:41 +0100)]
vcsm: VideoCore shared memory service for BCM2835
Add experimental support for the VideoCore shared memory service.
This allows user processes to allocate memory from VideoCore's
GPU relocatable heap and mmap the buffers. Additionally, the memory
handles can passed to other VideoCore services such as MMAL, OpenMax
and DispmanX
TODO
* This driver was originally released for BCM28155 which has a different
cache architecture to BCM2835. Consequently, in this release only
uncached mappings are supported. However, there's no fundamental
reason which cached mappings cannot be support or BCM2835
* More refactoring is required to remove the typedefs.
* Re-enable the some of the commented out debug-fs statistics which were
disabled when migrating code from proc-fs.
* There's a lot of code to support sharing of VCSM in order to support
Android. This could probably done more cleanly or perhaps just
removed.
Signed-off-by: Tim Gover <timgover@gmail.com>
config: Disable VC_SM for now to fix hang with cutdown kernel
vcsm: Use boolean as it cannot be built as module
On building the bcm_vc_sm as a module we get the following error:
v7_dma_flush_range and do_munmap are undefined in vc-sm.ko.
Fix by making it not an option to build as module
vcsm: Add ioctl for custom cache flushing
vc-sm: Move headers out of arch directory
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
vcsm: Treat EBUSY as success rather than SIGBUS
Currently if two cores access the same page concurrently one will return VM_FAULT_NOPAGE
and the other VM_FAULT_SIGBUS crashing the user code.
Also report when mapping fails.
Signed-off-by: popcornmix <popcornmix@gmail.com>
vcsm: Provide new ioctl to clean/invalidate a 2D block
vcsm: Convert to loading via device tree.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
VCSM: New option to import a DMABUF for VPU use
Takes a dmabuf, and then calls over to the VPU to wrap
it into a suitable handle.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
vcsm: fix multi-platform build
vcsm: add macros for cache functions
vcsm: use dma APIs for cache functions
* Will handle multi-platform builds
vcsm: Fix up macros to avoid breaking numbers used by existing apps
vcsm: Define cache operation constants in user header
Without this change, users have to use raw values (1, 2, 3) to specify
cache operation.
Signed-off-by: Sugizaki Yukimasa <i.can.speak.c.and.basic@gmail.com>
vcsm: Support for finding user/vc handle in memory pool
vmcs_sm_{usr,vc}_handle_from_pid_and_address() were failing to find
handle if specified user pointer is not exactly the one that the memory
locking call returned even if the pointer is in range of map/resource.
So fixed the functions to match the range.
Signed-off-by: Sugizaki Yukimasa <i.can.speak.c.and.basic@gmail.com>
vcsm: Unify cache manipulating functions
Signed-off-by: Sugizaki Yukimasa <i.can.speak.c.and.basic@gmail.com>
vcsm: Fix obscure conditions
Signed-off-by: Sugizaki Yukimasa <i.can.speak.c.and.basic@gmail.com>
vcsm: Fix memory leaking on clean_invalid2 ioctl handler
Signed-off-by: Sugizaki Yukimasa <i.can.speak.c.and.basic@gmail.com>
vcsm: Describe the use of cache operation constants
Signed-off-by: Sugizaki Yukimasa <i.can.speak.c.and.basic@gmail.com>
vcsm: Fix obscure conditions again
Signed-off-by: Sugizaki Yukimasa <i.can.speak.c.and.basic@gmail.com>
vcsm: Add no-op cache operation constant
Signed-off-by: Sugizaki Yukimasa <i.can.speak.c.and.basic@gmail.com>
vcsm: Revert to do page-table-walk-based cache manipulating on some ioctl calls
On FLUSH, INVALID, CLEAN_INVALID ioctl calls, cache operations based on
page table walk were used in case that the buffer of the cache is not
pinned. So reverted to do page-table-based cache manipulating.
Signed-off-by: Sugizaki Yukimasa <i.can.speak.c.and.basic@gmail.com>
vcsm: Define cache operation constants in user header
Without this change, users have to use raw values (1, 2, 3) to specify
cache operation.
Signed-off-by: Sugizaki Yukimasa <i.can.speak.c.and.basic@gmail.com>
vcsm: Updates for changed vchiq interface
vcsm: Fix an NULL dereference in the import_dmabuf error path
resource was dereferenced even though it was NULL.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
vcsm: Use struct service_creation
vcsm: Fix makefile include on out-of-tree builds
The vc_sm module tries to include the 'fs' directory from the
$(srctree). $(srctree) is already provided by the build system, and
causes the include path to be duplicated.
With -Werror this fails to compile.
Remove the unnecessary variable.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
vcsm: Remove set but unused variable
The 'success' variable is set by the call to vchi_service_close() but never checked.
Remove it, keeping the call in place.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
vcsm: Reduce scope of local functions
The functions:
vc_vchi_sm_send_msg
vc_sm_ioctl_alloc
vc_sm_ioctl_alloc_share
vc_sm_ioctl_import_dmabuf
Are declared without a prototype. They are not used outside of this
module, thus - convert them to static functions.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
vc_sm: Let it support to build in the non-src folder
If we build the kernel with "-O=$non-src-folder", this driver will
introdcue a building error because of the header's location.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
popcornmix [Fri, 28 Oct 2016 14:36:43 +0000 (15:36 +0100)]
vc_mem: Add vc_mem driver for querying firmware memory addresses
Signed-off-by: popcornmix <popcornmix@gmail.com>
BCM270x: Move vc_mem
Make the vc_mem module available for ARCH_BCM2835 by moving it.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
char: vc_mem: Fix up compat ioctls for 64bit kernel
compat_ioctl wasn't defined, so 32bit user/64bit kernel
always failed.
VC_MEM_IOC_MEM_PHYS_ADDR was defined with parameter size
unsigned long, so the ioctl cmd changes between sizes.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
char: vc_mem: Fix all coding style issues.
Cleans up all checkpatch errors in vc_mem.c and vc_mem.h
No functional change to the code.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Phil Elwell [Wed, 25 Mar 2015 17:49:47 +0000 (17:49 +0000)]
Adding bcm2835-sdhost driver, and an overlay to enable it
BCM2835 has two SD card interfaces. This driver uses the other one.
bcm2835-sdhost: Error handling fix, and code clarification
bcm2835-sdhost: Adding overclocking option
Allow a different clock speed to be substitued for a requested 50MHz.
This option is exposed using the "overclock_50" DT parameter.
Note that the sdhost interface is restricted to integer divisions of
core_freq, and the highest sensible option for a core_freq of 250MHz
is 84 (250/3 = 83.3MHz), the next being 125 (250/2) which is much too
high.
Use at your own risk.
bcm2835-sdhost: Round up the overclock, so 62 works for 62.5Mhz
Also only warn once for each overclock setting.
bcm2835-sdhost: Improve error handling and recovery
1) Expose the hw_reset method to the MMC framework, removing many
internal calls by the driver.
2) Reduce overclock setting on error.
3) Increase timeout to cope with high capacity cards.
4) Add properties and parameters to control pio_limit and debug.
5) Reduce messages at probe time.
bcm2835-sdhost: Further improve overclock back-off
bcm2835-sdhost: Clear HBLC for PIO mode
Also update pio_limit default in overlay README.
bcm2835-sdhost: Add the ERASE capability
See: https://github.com/raspberrypi/linux/issues/1076
bcm2835-sdhost: Ignore CRC7 for MMC CMD1
It seems that the sdhost interface returns CRC7 errors for CMD1,
which is the MMC-specific SEND_OP_COND. Returning these errors to
the MMC layer causes a downward spiral, but ignoring them seems
to be harmless.
bcm2835-mmc/sdhost: Remove ARCH_BCM2835 differences
The bcm2835-mmc driver (and -sdhost driver that copied from it)
contains code to handle SDIO interrupts in a threaded interrupt
handler rather than waking the MMC framework thread. The change
follows a patch from Russell King that adds the facility as the
preferred way of working.
However, the new code path is only present in ARCH_BCM2835
builds, which I have taken to be a way of testing the waters
rather than making the change across the board; I can't see
any technical reason why it wouldn't be enabled for MACH_BCM270X
builds. So this patch standardises on the ARCH_BCM2835 code,
removing the old code paths.
bcm2835-sdhost: Don't log timeout errors unless debug=1
The MMC card-discovery process generates timeouts. This is
expected behaviour, so reporting it to the user serves no purpose.
Suppress the reporting of timeout errors unless the debug flag
is on.
bcm2835-sdhost: Add workaround for odd behaviour on some cards
For reasons not understood, the sdhost driver fails when reading
sectors very near the end of some SD cards. The problem could
be related to the similar issue that reading the final sector
of any card as part of a multiple read never completes, and the
workaround is an extension of the mechanism introduced to solve
that problem which ensures those sectors are always read singly.
bcm2835-sdhost: Major revision
This is a significant revision of the bcm2835-sdhost driver. It
improves on the original in a number of ways:
1) Through the use of CMD23 for reads it appears to avoid problems
reading some sectors on certain high speed cards.
2) Better atomicity to prevent crashes.
3) Higher performance.
4) Activity logging included, for easier diagnosis in the event
of a problem.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
bcm2835-sdhost: Restore ATOMIC flag to PIO sg mapping
Allocation problems have been seen in a wireless driver, and
this is the only change which might have been responsible.
SQUASH: bcm2835-sdhost: Only claim one DMA channel
With both MMC controllers enabled there are few DMA channels left. The
bcm2835-sdhost driver only uses DMA in one direction at a time, so it
doesn't need to claim two channels.
See: https://github.com/raspberrypi/linux/issues/1327
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
bcm2835-sdhost: Workaround for "slow" sectors
Some cards have been seen to cause timeouts after certain sectors are
read. This workaround enforces a minimum delay between the stop after
reading one of those sectors and a subsequent data command.
Using CMD23 (SET_BLOCK_COUNT) avoids this problem, so good cards will
not be penalised by this workaround.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
bcm2835-sdhost: Firmware manages the clock divisor
The bcm2835-sdhost driver hands control of the CDIV clock divisor
register to matching firmware, allowing it to adjust to a changing
core clock. This removes the need to use the performance governor or
to enable io_is_busy on the on-demand governor in order to get the
best SD performance.
N.B. As SD clocks must be an integer divisor of the core clock, it is
possible that the SD clock for "turbo" mode can be different (even
lower) than "normal" mode.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
bcm2835-sdhost: Reset the clock in task context
Since reprogramming the clock can now involve a round-trip to the
firmware it must not be done at atomic context, and a tasklet
is not a task.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
bcm2835-sdhost: Don't exit cmd wait loop on error
The FAIL flag can be set in the CMD register before command processing
is complete, leading to spurious "failed to complete" errors. This has
the effect of promoting harmless CRC7 errors during CMD1 processing
into errors that can delay and even prevent booting.
Also:
1) Convert the last KERN_ERROR message in the register dumping to
KERN_INFO.
2) Remove an unnecessary reset call from bcm2835_sdhost_add_host.
See: https://github.com/raspberrypi/linux/pull/1492
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
bcm2835-sdhost: mmc_card_blockaddr fix
Get the definition of mmc_card_blockaddr from drivers/mmc/core/card.h.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
bcm2835-sdhost: New timer API
mmc: bcm2835-sdhost: Support underclocking
Support underclocking of the SD bus in two ways:
1. using the max-frequency DT property (which currently has no DT
parameter), and
2. using the exiting sd_overclock parameter.
The two methods differ slightly - in the former the MMC subsystem is
aware of the underclocking, while in the latter it isn't - but the
end results should be the same.
See: https://github.com/raspberrypi/linux/issues/2350
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
mmc: bcm2835-sdhost: Add include
highmem.h (needed for kmap_atomic) is pulled in by one of the other
include files, but only with some CONFIG settings. Make the inclusion
explicit to cater for cases where the CONFIG setting is absent.
See: https://github.com/raspberrypi/linux/issues/2366
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
mmc/bcm2835-sdhost: Recover from MMC_SEND_EXT_CSD
If the user issues an "mmc extcsd read", the SD controller receives
what it thinks is a SEND_IF_COND command with an unexpected data block.
The resulting operations leave the FSM stuck in READWAIT, a state which
persists until the MMC framework resets the controller, by which point
the root filesystem is likely to have been unmounted.
A less heavyweight solution is to detect the condition and nudge the
FSM by asserting the (self-clearing) FORCE_DATA_MODE bit.
N.B. This workaround was essentially discovered by accident and without
a full understanding the inner workings of the controller, so it is
fortunate that the "fix" only modifies error paths.
See: https://github.com/raspberrypi/linux/issues/2728
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
mmc: bcm2835-sdhost: Fix warnings on arm64
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
bcm2835-sdhost: Allow for sg entries that cross pages
The dma_complete handling code calculates a virtual address for a page
then adds an offset, but if the offset is more than a page and HIGHMEM
is in use then the summed address could be in an unmapped (or just
incorrect) page.
The upstream SDHOST driver allows for this possibility - copy the code
that does so.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
bcm2835-sdhost: Fix DMA channel leak on error/remove
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
mmc: bcm2835-sdhost: Support 64-bit physical addresses
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
gellert [Fri, 15 Aug 2014 15:35:06 +0000 (16:35 +0100)]
MMC: added alternative MMC driver
mmc: Disable CMD23 transfers on all cards
Pending wire-level investigation of these types of transfers
and associated errors on bcm2835-mmc, disable for now. Fallback of
CMD18/CMD25 transfers will be used automatically by the MMC layer.
Reported/Tested-by: Gellert Weisz <gellert@raspberrypi.org>
mmc: bcm2835-mmc: enable DT support for all architectures
Both ARCH_BCM2835 and ARCH_BCM270x are built with OF now.
Enable Device Tree support for all architectures.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
mmc: bcm2835-mmc: fix probe error handling
Probe error handling is broken in several places.
Simplify error handling by using device managed functions.
Replace pr_{err,info} with dev_{err,info}.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
bcm2835-mmc: Add locks when accessing sdhost registers
bcm2835-mmc: Add range of debug options for slowing things down
bcm2835-mmc: Add option to disable some delays
bcm2835-mmc: Add option to disable MMC_QUIRK_BLK_NO_CMD23
bcm2835-mmc: Default to disabling MMC_QUIRK_BLK_NO_CMD23
bcm2835-mmc: Adding overclocking option
Allow a different clock speed to be substitued for a requested 50MHz.
This option is exposed using the "overclock_50" DT parameter.
Note that the mmc interface is restricted to EVEN integer divisions of
250MHz, and the highest sensible option is 63 (250/4 = 62.5), the
next being 125 (250/2) which is much too high.
Use at your own risk.
bcm2835-mmc: Round up the overclock, so 62 works for 62.5Mhz
Also only warn once for each overclock setting.
mmc: bcm2835-mmc: Make available on ARCH_BCM2835
Make the bcm2835-mmc driver available for use on ARCH_BCM2835.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
BCM270x_DT: add bcm2835-mmc entry
Add Device Tree entry for bcm2835-mmc.
In non-DT mode, don't add the device in the board file.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
bcm2835-mmc: Don't overwrite MMC capabilities from DT
bcm2835-mmc: Don't override bus width capabilities from devicetree
Take out the force setting of the MMC_CAP_4_BIT_DATA host capability
so that the result read from devicetree via mmc_of_parse() is
preserved.
bcm2835-mmc: Only claim one DMA channel
With both MMC controllers enabled there are few DMA channels left. The
bcm2835-mmc driver only uses DMA in one direction at a time, so it
doesn't need to claim two channels.
See: https://github.com/raspberrypi/linux/issues/1327
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
bcm2835-mmc: New timer API
mmc: bcm2835-mmc: Support underclocking
Support underclocking of the SD bus using the max-frequency DT property
(which currently has no DT parameter). The sd_overclock parameter
already provides another way to achieve the same thing which should be
equivalent in end result, but it is a bug not to support max-frequency
as well.
See: https://github.com/raspberrypi/linux/issues/2350
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
mmc/bcm2835: Recover from MMC_SEND_EXT_CSD
If the user issues an "mmc extcsd read", the SD controller receives
what it thinks is a SEND_IF_COND command with an unexpected data block.
The resulting operations leave the FSM stuck in READWAIT, a state which
persists until the MMC framework resets the controller, by which point
the root filesystem is likely to have been unmounted.
A less heavyweight solution is to detect the condition and nudge the
FSM by asserting the (self-clearing) FORCE_DATA_MODE bit.
N.B. This workaround was essentially discovered by accident and without
a full understanding the inner workings of the controller, so it is
fortunate that the "fix" only modifies error paths.
See: https://github.com/raspberrypi/linux/issues/2728
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
bcm2835-mmc: Fix DMA channel leak
The BCM2835 MMC host driver requests a DMA channel on probe but neglects
to release the channel in the probe error path and on driver unbind.
I'm seeing this happen on every boot of the Compute Module 3: On first
driver probe, DMA channel 2 is allocated and then leaked with a "could
not get clk, deferring probe" message. On second driver probe, channel 4
is allocated.
Fix it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
bcm2835-mmc: Fix struct mmc_host leak on probe
The BCM2835 MMC host driver requests the bus address of the host's
register map on probe. If that fails, the driver leaks the struct
mmc_host allocated earlier.
Fix it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
bcm2835-mmc: Fix duplicate free_irq() on remove
The BCM2835 MMC host driver requests its interrupt as a device-managed
resource, so the interrupt is automatically freed after the driver is
unbound.
However on driver unbind, bcm2835_mmc_remove() frees the interrupt
explicitly to avoid invocation of the interrupt handler after driver
structures have been torn down.
The interrupt is thus freed twice, leading to a WARN splat in
__free_irq(). Fix by not requesting the interrupt as a device-managed
resource.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
bcm2835-mmc: Handle mmc_add_host() errors
The BCM2835 MMC host driver calls mmc_add_host() but doesn't check its
return value. Errors occurring in that function are therefore not
handled. Fix it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
bcm2835-mmc: Deduplicate reset of driver data on remove
The BCM2835 MMC host driver sets the device's driver data pointer to
NULL on ->remove() even though the driver core subsequently does the
same in __device_release_driver(). Drop the duplicate assignment.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
bcm2835_mmc: Remove vestigial threaded IRQ
With SDIO processing now managed by the MMC framework with a
workqueue, the bcm2835_mmc driver no longer needs a threaded
IRQ.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Add missing dma_unmap_sg calls to free relevant swiotlb bounce buffers.
This prevents DMA leaks.
Signed-off-by: Yaroslav Rosomakho <yaroslavros@gmail.com>
Limit max_req_size under arm64 (or any other platform that uses swiotlb) to prevent potential buffer overflow due to bouncing.
Signed-off-by: Yaroslav Rosomakho <yaroslavros@gmail.com>
Florian Meier [Fri, 22 Nov 2013 13:22:53 +0000 (14:22 +0100)]
dmaengine: Add support for BCM2708
Add support for DMA controller of BCM2708 as used in the Raspberry Pi.
Currently it only supports cyclic DMA.
Signed-off-by: Florian Meier <florian.meier@koalo.de>
dmaengine: expand functionality by supporting scatter/gather transfers sdhci-bcm2708 and dma.c: fix for LITE channels
DMA: fix cyclic LITE length overflow bug
dmaengine: bcm2708: Remove chancnt affectations
Mirror bcm2835-dma.c commit
9eba5536a7434c69d8c185d4bd1c70734d92287d:
chancnt is already filled by dma_async_device_register, which uses the channel
list to know how much channels there is.
Since it's already filled, we can safely remove it from the drivers' probe
function.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
dmaengine: bcm2708: overwrite dreq only if it is not set
dreq is set when the DMA channel is fetched from Device Tree.
slave_id is set using dmaengine_slave_config().
Only overwrite dreq with slave_id if it is not set.
dreq/slave_id in the cyclic DMA case is not touched, because I don't
have hardware to test with.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
dmaengine: bcm2708: do device registration in the board file
Don't register the device in the driver. Do it in the board file.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
dmaengine: bcm2708: don't restrict DT support to ARCH_BCM2835
Both ARCH_BCM2835 and ARCH_BCM270x are built with OF now.
Add Device Tree support to the non ARCH_BCM2835 case.
Use the same driver name regardless of architecture.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
BCM270x_DT: add bcm2835-dma entry
Add Device Tree entry for bcm2835-dma.
The entry doesn't contain any resources since they are handled
by the arch/arm/mach-bcm270x/dma.c driver.
In non-DT mode, don't add the device in the board file.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
bcm2708-dmaengine: Add debug options
BCM270x: Add memory and irq resources to dmaengine device and DT
Prepare for merging of the legacy DMA API arch driver dma.c
with bcm2708-dmaengine by adding memory and irq resources both
to platform file device and Device Tree node.
Don't use BCM_DMAMAN_DRIVER_NAME so we don't have to include mach/dma.h
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
dmaengine: bcm2708: Merge with arch dma.c driver and disable dma.c
Merge the legacy DMA API driver with bcm2708-dmaengine.
This is done so we can use bcm2708_fb on ARCH_BCM2835 (mailbox
driver is also needed).
Changes to the dma.c code:
- Use BIT() macro.
- Cutdown some comments to one line.
- Add mutex to vc_dmaman and use this, since the dev lock is locked
during probing of the engine part.
- Add global g_dmaman variable since drvdata is used by the engine part.
- Restructure for readability:
vc_dmaman_chan_alloc()
vc_dmaman_chan_free()
bcm_dma_chan_free()
- Restructure bcm_dma_chan_alloc() to simplify error handling.
- Use device irq resources instead of hardcoded bcm_dma_irqs table.
- Remove dev_dmaman_register() and code it directly.
- Remove dev_dmaman_deregister() and code it directly.
- Simplify bcm_dmaman_probe() using devm_* functions.
- Get dmachans from DT if available.
- Keep 'dma.dmachans' module argument name for backwards compatibility.
Make it available on ARCH_BCM2835 as well.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
dmaengine: bcm2708: set residue_granularity field
bcm2708-dmaengine supports residue reporting at burst level
but didn't report this via the residue_granularity field.
Without this field set properly we get playback issues with I2S cards.
dmaengine: bcm2708-dmaengine: Fix memory leak when stopping a running transfer
bcm2708-dmaengine: Use more DMA channels (but not 12)
1) Only the bcm2708_fb drivers uses the legacy DMA API, and
it requires a BULK-capable channel, so all other types
(FAST, NORMAL and LITE) can be made available to the regular
DMA API.
2) DMA channels 11-14 share an interrupt. The driver can't
handle this, so don't use channels 12-14 (12 was used, probably
because it appears to have an interrupt, but in reality that
interrupt is for activity on ANY channel). This may explain
a lockup encountered when running out of DMA channels.
The combined effect of this patch is to leave 7 DMA channels
available + channel 0 for bcm2708_fb via the legacy API.
See: https://github.com/raspberrypi/linux/issues/1110
https://github.com/raspberrypi/linux/issues/1108
dmaengine: bcm2708: Make legacy API available for bcm2835-dma
bcm2708_fb uses the legacy DMA API, so in order to start using
bcm2835-dma, bcm2835-dma has to support the legacy API. Make this
possible by exporting bcm_dmaman_probe() and bcm_dmaman_remove().
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
dmaengine: bcm2708: Change DT compatible string
Both bcm2835-dma and bcm2708-dmaengine have the same compatible string.
So change compatible to "brcm,bcm2708-dma".
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
dmaengine: bcm2708: Remove driver but keep legacy API
Dropping non-DT support means we don't need this driver,
but we still need the legacy DMA API.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
bcm2708-dmaengine - Fix arm64 portability/build issues
dma-bcm2708: Fix module compilation of CONFIG_DMA_BCM2708
bcm2708-dmaengine.c defines functions like bcm_dma_start which are
defined as well in dma-bcm2708.h as inline versions when
CONFIG_DMA_BCM2708 is not defined. This works fine when
CONFIG_DMA_BCM2708 is built in, but when it is selected as module build
fails with redefinition errors because in the build system when
CONFIG_DMA_BCM2708 is selected as module, the macro becomes
CONFIG_DMA_BCM2708_MODULE.
This patch makes the header use CONFIG_DMA_BCM2708_MODULE too when
available.
Fixes https://github.com/raspberrypi/linux/issues/2056
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
Harm Hanemaaijer [Thu, 20 Jun 2013 18:21:39 +0000 (20:21 +0200)]
Speed up console framebuffer imageblit function
Especially on platforms with a slower CPU but a relatively high
framebuffer fill bandwidth, like current ARM devices, the existing
console monochrome imageblit function used to draw console text is
suboptimal for common pixel depths such as 16bpp and 32bpp. The existing
code is quite general and can deal with several pixel depths. By creating
special case functions for 16bpp and 32bpp, by far the most common pixel
formats used on modern systems, a significant speed-up is attained
which can be readily felt on ARM-based devices like the Raspberry Pi
and the Allwinner platform, but should help any platform using the
fb layer.
The special case functions allow constant folding, eliminating a number
of instructions including divide operations, and allow the use of an
unrolled loop, eliminating instructions with a variable shift size,
reducing source memory access instructions, and eliminating excessive
branching. These unrolled loops also allow much better code optimization
by the C compiler. The code that selects which optimized variant is used
is also simplified, eliminating integer divide instructions.
The speed-up, measured by timing 'cat file.txt' in the console, varies
between 40% and 70%, when testing on the Raspberry Pi and Allwinner
ARM-based platforms, depending on font size and the pixel depth, with
the greater benefit for 32bpp.
Signed-off-by: Harm Hanemaaijer <fgenfb@yahoo.com>
Siarhei Siamashka [Mon, 17 Jun 2013 10:32:11 +0000 (13:32 +0300)]
fbdev: add FBIOCOPYAREA ioctl
Based on the patch authored by Ali Gholami Rudi at
https://lkml.org/lkml/2009/7/13/153
Provide an ioctl for userspace applications, but only if this operation
is hardware accelerated (otherwide it does not make any sense).
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
bcm2708_fb: Add ioctl for reading gpu memory through dma
video: bcm2708_fb: Add compat_ioctl support.
When using a 64 bit kernel with 32 bit userspace we need
compat ioctl handling for FBIODMACOPY as one of the
parameters is a pointer.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
James Hughes [Thu, 14 Mar 2019 13:27:54 +0000 (13:27 +0000)]
Pulled in the multi frame buffer support from the Pi3 repo
popcornmix [Wed, 17 Jun 2015 16:06:34 +0000 (17:06 +0100)]
bcm2708 framebuffer driver
Signed-off-by: popcornmix <popcornmix@gmail.com>
bcm2708_fb : Implement blanking support using the mailbox property interface
bcm2708_fb: Add pan and vsync controls
bcm2708_fb: DMA acceleration for fb_copyarea
Based on http://www.raspberrypi.org/phpBB3/viewtopic.php?p=62425#p62425
Also used Simon's dmaer_master module as a reference for tweaking DMA
settings for better performance.
For now busylooping only. IRQ support might be added later.
With non-overclocked Raspberry Pi, the performance is ~360 MB/s
for simple copy or ~260 MB/s for two-pass copy (used when dragging
windows to the right).
In the case of using DMA channel 0, the performance improves
to ~440 MB/s.
For comparison, VFP optimized CPU copy can only do ~114 MB/s in
the same conditions (hindered by reading uncached source buffer).
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
bcm2708_fb: report number of dma copies
Add a counter (exported via debugfs) reporting the
number of dma copies that the framebuffer driver
has done, in order to help evaluate different
optimization strategies.
Signed-off-by: Luke Diamand <luked@broadcom.com>
bcm2708_fb: use IRQ for DMA copies
The copyarea ioctl() uses DMA to speed things along. This
was busy-waiting for completion. This change supports using
an interrupt instead for larger transfers. For small
transfers, busy-waiting is still likely to be faster.
Signed-off-by: Luke Diamand <luke@diamand.org>
bcm2708: Make ioctl logging quieter
video: fbdev: bcm2708_fb: Don't panic on error
No need to panic the kernel if the video driver fails.
Just print a message and return an error.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
fbdev: bcm2708_fb: Add ARCH_BCM2835 support
Add Device Tree support.
Pass the device to dma_alloc_coherent() in order to get the
correct bus address on ARCH_BCM2835.
Use the new DMA legacy API header file.
Including <mach/platform.h> is not necessary.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
BCM270x_DT: Add bcm2708-fb device
Add bcm2708-fb to Device Tree and don't add the
platform device when booting in DT mode.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Cleanup of bcm2708_fb file to kernel coding standards
Some minor change to function - remove a use of
in_atomic, plus replacing various debug messages
that manually specify the function name with
("%s",.__func__)
Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
video: bcm2708_fb: Try allocating on the ARM and passing to VPU
Currently the VPU allocates the contiguous buffer for the
framebuffer.
Try an alternate path first where we use dma_alloc_coherent
and pass the buffer to the VPU. Should the VPU firmware not
support that path, then free the buffer and revert to the
old behaviour of using the VPU allocation.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
popcornmix [Wed, 1 May 2013 18:46:17 +0000 (19:46 +0100)]
Add dwc_otg driver
Signed-off-by: popcornmix <popcornmix@gmail.com>
usb: dwc: fix lockdep false positive
Signed-off-by: Kari Suvanto <karis79@gmail.com>
usb: dwc: fix inconsistent lock state
Signed-off-by: Kari Suvanto <karis79@gmail.com>
Add FIQ patch to dwc_otg driver. Enable with dwc_otg.fiq_fix_enable=1. Should give about 10% more ARM performance.
Thanks to Gordon and Costas
Avoid dynamic memory allocation for channel lock in USB driver. Thanks ddv2005.
Add NAK holdoff scheme. Enabled by default, disable with dwc_otg.nak_holdoff_enable=0. Thanks gsh
Make sure we wait for the reset to finish
dwc_otg: fix bug in dwc_otg_hcd.c resulting in silent kernel
memory corruption, escalating to OOPS under high USB load.
dwc_otg: Fix unsafe access of QTD during URB enqueue
In dwc_otg_hcd_urb_enqueue during qtd creation, it was possible that the
transaction could complete almost immediately after the qtd was assigned
to a host channel during URB enqueue, which meant the qtd pointer was no
longer valid having been completed and removed. Usually, this resulted in
an OOPS during URB submission. By predetermining whether transactions
need to be queued or not, this unsafe pointer access is avoided.
This bug was only evident on the Pi model A where a device was attached
that had no periodic endpoints (e.g. USB pendrive or some wlan devices).
dwc_otg: Fix incorrect URB allocation error handling
If the memory allocation for a dwc_otg_urb failed, the kernel would OOPS
because for some reason a member of the *unallocated* struct was set to
zero. Error handling changed to fail correctly.
dwc_otg: fix potential use-after-free case in interrupt handler
If a transaction had previously aborted, certain interrupts are
enabled to track error counts and reset where necessary. On IN
endpoints the host generates an ACK interrupt near-simultaneously
with completion of transfer. In the case where this transfer had
previously had an error, this results in a use-after-free on
the QTD memory space with a 1-byte length being overwritten to
0x00.
dwc_otg: add handling of SPLIT transaction data toggle errors
Previously a data toggle error on packets from a USB1.1 device behind
a TT would result in the Pi locking up as the driver never handled
the associated interrupt. Patch adds basic retry mechanism and
interrupt acknowledgement to cater for either a chance toggle error or
for devices that have a broken initial toggle state (FT8U232/FT232BM).
dwc_otg: implement tasklet for returning URBs to usbcore hcd layer
The dwc_otg driver interrupt handler for transfer completion will spend
a very long time with interrupts disabled when a URB is completed -
this is because usb_hcd_giveback_urb is called from within the handler
which for a USB device driver with complicated processing (e.g. webcam)
will take an exorbitant amount of time to complete. This results in
missed completion interrupts for other USB packets which lead to them
being dropped due to microframe overruns.
This patch splits returning the URB to the usb hcd layer into a
high-priority tasklet. This will have most benefit for isochronous IN
transfers but will also have incidental benefit where multiple periodic
devices are active at once.
dwc_otg: fix NAK holdoff and allow on split transactions only
This corrects a bug where if a single active non-periodic endpoint
had at least one transaction in its qh, on frnum == MAX_FRNUM the qh
would get skipped and never get queued again. This would result in
a silent device until error detection (automatic or otherwise) would
either reset the device or flush and requeue the URBs.
Additionally the NAK holdoff was enabled for all transactions - this
would potentially stall a HS endpoint for 1ms if a previous error state
enabled this interrupt and the next response was a NAK. Fix so that
only split transactions get held off.
dwc_otg: Call usb_hcd_unlink_urb_from_ep with lock held in completion handler
usb_hcd_unlink_urb_from_ep must be called with the HCD lock held. Calling it
asynchronously in the tasklet was not safe (regression in
c4564d4a1a0a9b10d4419e48239f5d99e88d2667).
This change unlinks it from the endpoint prior to queueing it for handling in
the tasklet, and also adds a check to ensure the urb is OK to be unlinked
before doing so.
NULL pointer dereference kernel oopses had been observed in usb_hcd_giveback_urb
when a USB device was unplugged/replugged during data transfer. This effect
was reproduced using automated USB port power control, hundreds of replug
events were performed during active transfers to confirm that the problem was
eliminated.
USB fix using a FIQ to implement split transactions
This commit adds a FIQ implementaion that schedules
the split transactions using a FIQ so we don't get
held off by the interrupt latency of Linux
dwc_otg: fix device attributes and avoid kernel warnings on boot
dcw_otg: avoid logging function that can cause panics
See: https://github.com/raspberrypi/firmware/issues/21
Thanks to cleverca22 for fix
dwc_otg: mask correct interrupts after transaction error recovery
The dwc_otg driver will unmask certain interrupts on a transaction
that previously halted in the error state in order to reset the
QTD error count. The various fine-grained interrupt handlers do not
consider that other interrupts besides themselves were unmasked.
By disabling the two other interrupts only ever enabled in DMA mode
for this purpose, we can avoid unnecessary function calls in the
IRQ handler. This will also prevent an unneccesary FIQ interrupt
from being generated if the FIQ is enabled.
dwc_otg: fiq: prevent FIQ thrash and incorrect state passing to IRQ
In the case of a transaction to a device that had previously aborted
due to an error, several interrupts are enabled to reset the error
count when a device responds. This has the side-effect of making the
FIQ thrash because the hardware will generate multiple instances of
a NAK on an IN bulk/interrupt endpoint and multiple instances of ACK
on an OUT bulk/interrupt endpoint. Make the FIQ mask and clear the
associated interrupts.
Additionally, on non-split transactions make sure that only unmasked
interrupts are cleared. This caused a hard-to-trigger but serious
race condition when you had the combination of an endpoint awaiting
error recovery and a transaction completed on an endpoint - due to
the sequencing and timing of interrupts generated by the dwc_otg core,
it was possible to confuse the IRQ handler.
Fix function tracing
dwc_otg: whitespace cleanup in dwc_otg_urb_enqueue
dwc_otg: prevent OOPSes during device disconnects
The dwc_otg_urb_enqueue function is thread-unsafe. In particular the
access of urb->hcpriv, usb_hcd_link_urb_to_ep, dwc_otg_urb->qtd and
friends does not occur within a critical section and so if a device
was unplugged during activity there was a high chance that the
usbcore hub_thread would try to disable the endpoint with partially-
formed entries in the URB queue. This would result in BUG() or null
pointer dereferences.
Fix so that access of urb->hcpriv, enqueuing to the hardware and
adding to usbcore endpoint URB lists is contained within a single
critical section.
dwc_otg: prevent BUG() in TT allocation if hub address is > 16
A fixed-size array is used to track TT allocation. This was
previously set to 16 which caused a crash because
dwc_otg_hcd_allocate_port would read past the end of the array.
This was hit if a hub was plugged in which enumerated as addr > 16,
due to previous device resets or unplugs.
Also add #ifdef FIQ_DEBUG around hcd->hub_port_alloc[], which grows
to a large size if 128 hub addresses are supported. This field is
for debug only for tracking which frame an allocate happened in.
dwc_otg: make channel halts with unknown state less damaging
If the IRQ received a channel halt interrupt through the FIQ
with no other bits set, the IRQ would not release the host
channel and never complete the URB.
Add catchall handling to treat as a transaction error and retry.
dwc_otg: fiq_split: use TTs with more granularity
This fixes certain issues with split transaction scheduling.
- Isochronous multi-packet OUT transactions now hog the TT until
they are completed - this prevents hubs aborting transactions
if they get a periodic start-split out-of-order
- Don't perform TT allocation on non-periodic endpoints - this
allows simultaneous use of the TT's bulk/control and periodic
transaction buffers
This commit will mainly affect USB audio playback.
dwc_otg: fix potential sleep while atomic during urb enqueue
Fixes a regression introduced with
eb1b482a. Kmalloc called from
dwc_otg_hcd_qtd_add / dwc_otg_hcd_qtd_create did not always have
the GPF_ATOMIC flag set. Force this flag when inside the larger
critical section.
dwc_otg: make fiq_split_enable imply fiq_fix_enable
Failing to set up the FIQ correctly would result in
"IRQ 32: nobody cared" errors in dmesg.
dwc_otg: prevent crashes on host port disconnects
Fix several issues resulting in crashes or inconsistent state
if a Model A root port was disconnected.
- Clean up queue heads properly in kill_urbs_in_qh_list by
removing the empty QHs from the schedule lists
- Set the halt status properly to prevent IRQ handlers from
using freed memory
- Add fiq_split related cleanup for saved registers
- Make microframe scheduling reclaim host channels if
active during a disconnect
- Abort URBs with -ESHUTDOWN status response, informing
device drivers so they respond in a more correct fashion
and don't try to resubmit URBs
- Prevent IRQ handlers from attempting to handle channel
interrupts if the associated URB was dequeued (and the
driver state was cleared)
dwc_otg: prevent leaking URBs during enqueue
A dwc_otg_urb would get leaked if the HCD enqueue function
failed for any reason. Free the URB at the appropriate points.
dwc_otg: Enable NAK holdoff for control split transactions
Certain low-speed devices take a very long time to complete a
data or status stage of a control transaction, producing NAK
responses until they complete internal processing - the USB2.0
spec limit is up to 500mS. This causes the same type of interrupt
storm as seen with USB-serial dongles prior to
c8edb238.
In certain circumstances, usually while booting, this interrupt
storm could cause SD card timeouts.
dwc_otg: Fix for occasional lockup on boot when doing a USB reset
dwc_otg: Don't issue traffic to LS devices in FS mode
Issuing low-speed packets when the root port is in full-speed mode
causes the root port to stop responding. Explicitly fail when
enqueuing URBs to a LS endpoint on a FS bus.
Fix ARM architecture issue with local_irq_restore()
If local_fiq_enable() is called before a local_irq_restore(flags) where
the flags variable has the F bit set, the FIQ will be erroneously disabled.
Fixup arch_local_irq_restore to avoid trampling the F bit in CPSR.
Also fix some of the hacks previously implemented for previous dwc_otg
incarnations.
dwc_otg: fiq_fsm: Base commit for driver rewrite
This commit removes the previous FIQ fixes entirely and adds fiq_fsm.
This rewrite features much more complete support for split transactions
and takes into account several OTG hardware bugs. High-speed
isochronous transactions are also capable of being performed by fiq_fsm.
All driver options have been removed and replaced with:
- dwc_otg.fiq_enable (bool)
- dwc_otg.fiq_fsm_enable (bool)
- dwc_otg.fiq_fsm_mask (bitmask)
- dwc_otg.nak_holdoff (unsigned int)
Defaults are specified such that fiq_fsm behaves similarly to the
previously implemented FIQ fixes.
fiq_fsm: Push error recovery into the FIQ when fiq_fsm is used
If the transfer associated with a QTD failed due to a bus error, the HCD
would retry the transfer up to 3 times (implementing the USB2.0
three-strikes retry in software).
Due to the masking mechanism used by fiq_fsm, it is only possible to pass
a single interrupt through to the HCD per-transfer.
In this instance host channels would fall off the radar because the error
reset would function, but the subsequent channel halt would be lost.
Push the error count reset into the FIQ handler.
fiq_fsm: Implement timeout mechanism
For full-speed endpoints with a large packet size, interrupt latency
runs the risk of the FIQ starting a transaction too late in a full-speed
frame. If the device is still transmitting data when EOF2 for the
downstream frame occurs, the hub will disable the port. This change is
not reflected in the hub status endpoint and the device becomes
unresponsive.
Prevent high-bandwidth transactions from being started too late in a
frame. The mechanism is not guaranteed: a combination of bit stuffing
and hub latency may still result in a device overrunning.
fiq_fsm: fix bounce buffer utilisation for Isochronous OUT
Multi-packet isochronous OUT transactions were subject to a few bounday
bugs. Fix them.
Audio playback is now much more robust: however, an issue stands with
devices that have adaptive sinks - ALSA plays samples too fast.
dwc_otg: Return full-speed frame numbers in HS mode
The frame counter increments on every *microframe* in high-speed mode.
Most device drivers expect this number to be in full-speed frames - this
caused considerable confusion to e.g. snd_usb_audio which uses the
frame counter to estimate the number of samples played.
fiq_fsm: save PID on completion of interrupt OUT transfers
Also add edge case handling for interrupt transports.
Note that for periodic split IN, data toggles are unimplemented in the
OTG host hardware - it unconditionally accepts any PID.
fiq_fsm: add missing case for fiq_fsm_tt_in_use()
Certain combinations of bitrate and endpoint activity could
result in a periodic transaction erroneously getting started
while the previous Isochronous OUT was still active.
fiq_fsm: clear hcintmsk for aborted transactions
Prevents the FIQ from erroneously handling interrupts
on a timed out channel.
fiq_fsm: enable by default
fiq_fsm: fix dequeues for non-periodic split transactions
If a dequeue happened between the SSPLIT and CSPLIT phases of the
transaction, the HCD would never receive an interrupt.
fiq_fsm: Disable by default
fiq_fsm: Handle HC babble errors
The HCTSIZ transfer size field raises a babble interrupt if
the counter wraps. Handle the resulting interrupt in this case.
dwc_otg: fix interrupt registration for fiq_enable=0
Additionally make the module parameter conditional for wherever
hcd->fiq_state is touched.
fiq_fsm: Enable by default
dwc_otg: Fix various issues with root port and transaction errors
Process the host port interrupts correctly (and don't trample them).
Root port hotplug now functional again.
Fix a few thinkos with the transaction error passthrough for fiq_fsm.
fiq_fsm: Implement hack for Split Interrupt transactions
Hubs aren't too picky about which endpoint we send Control type split
transactions to. By treating Interrupt transfers as Control, it is
possible to use the non-periodic queue in the OTG core as well as the
non-periodic FIFOs in the hub itself. This massively reduces the
microframe exclusivity/contention that periodic split transactions
otherwise have to enforce.
It goes without saying that this is a fairly egregious USB specification
violation, but it works.
Original idea by Hans Petter Selasky @ FreeBSD.org.
dwc_otg: FIQ support on SMP. Set up FIQ stack and handler on Core 0 only.
dwc_otg: introduce fiq_fsm_spin(un|)lock()
SMP safety for the FIQ relies on register read-modify write cycles being
completed in the correct order. Several places in the DWC code modify
registers also touched by the FIQ. Protect these by a bare-bones lock
mechanism.
This also makes it possible to run the FIQ and IRQ handlers on different
cores.
fiq_fsm: fix build on bcm2708 and bcm2709 platforms
dwc_otg: put some barriers back where they should be for UP
bcm2709/dwc_otg: Setup FIQ on core 1 if >1 core active
dwc_otg: fixup read-modify-write in critical paths
Be more careful about read-modify-write on registers that the FIQ
also touches.
Guard fiq_fsm_spin_lock with fiq_enable check
fiq_fsm: Falling out of the state machine isn't fatal
This edge case can be hit if the port is disabled while the FIQ is
in the middle of a transaction. Make the effects less severe.
Also get rid of the useless return value.
squash: dwc_otg: Allow to build without SMP
usb: core: make overcurrent messages more prominent
Hub overcurrent messages are more serious than "debug". Increase loglevel.
usb: dwc_otg: Don't use dma_to_virt()
Commit 6ce0d20 changes dma_to_virt() which breaks this driver.
Open code the old dma_to_virt() implementation to work around this.
Limit the use of __bus_to_virt() to cases where transfer_buffer_length
is set and transfer_buffer is not set. This is done to increase the
chance that this driver will also work on ARCH_BCM2835.
transfer_buffer should not be NULL if the length is set, but the
comment in the code indicates that there are situations where this
might happen. drivers/usb/isp1760/isp1760-hcd.c also has a similar
comment pointing to a possible: 'usb storage / SCSI bug'.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
dwc_otg: Fix crash when fiq_enable=0
dwc_otg: fiq_fsm: Make high-speed isochronous strided transfers work properly
Certain low-bandwidth high-speed USB devices (specialist audio devices,
compressed-frame webcams) have packet intervals > 1 microframe.
Stride these transfers in the FIQ by using the start-of-frame interrupt
to restart the channel at the right time.
dwc_otg: Force host mode to fix incorrect compute module boards
dwc_otg: Add ARCH_BCM2835 support
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
dwc_otg: Simplify FIQ irq number code
Dropping ATAGS means we can simplify the FIQ irq number code.
Also add error checking on the returned irq number.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
dwc_otg: Remove duplicate gadget probe/unregister function
dwc_otg: Properly set the HFIR
Douglas Anderson reported:
According to the most up to date version of the dwc2 databook, the FRINT
field of the HFIR register should be programmed to:
* 125 us * (PHY clock freq for HS) - 1
* 1000 us * (PHY clock freq for FS/LS) - 1
This is opposed to older versions of the doc that claimed it should be:
* 125 us * (PHY clock freq for HS)
* 1000 us * (PHY clock freq for FS/LS)
and reported lower timing jitter on a USB analyser
dcw_otg: trim xfer length when buffer larger than allocated size is received
dwc_otg: Don't free qh align buffers in atomic context
dwc_otg: Enable the hack for Split Interrupt transactions by default
dwc_otg.fiq_fsm_mask=0xF has long been a suggestion for users with audio stutters or other USB bandwidth issues.
So far we are aware of many success stories but no failure caused by this setting.
Make it a default to learn more.
See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=70437
Signed-off-by: popcornmix <popcornmix@gmail.com>
dwc_otg: Use kzalloc when suitable
dwc_otg: Pass struct device to dma_alloc*()
This makes it possible to get the bus address from Device Tree.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
dwc_otg: fix summarize urb->actual_length for isochronous transfers
Kernel does not copy input data of ISO transfers to userspace
if actual_length is set only in ISO transfers and not summarized
in urb->actual_length. Fixes raspberrypi/linux#903
fiq_fsm: Use correct states when starting isoc OUT transfers
In fiq_fsm_start_next_periodic() if an isochronous OUT transfer
was selected, no regard was given as to whether this was a single-packet
transfer or a multi-packet staged transfer.
For single-packet transfers, this had the effect of repeatedly sending
OUT packets with bogus data and lengths.
Eventually if the channel was repeatedly enabled enough times, this
would lock up the OTG core and no further bus transfers would happen.
Set the FSM state up properly if we select a single-packet transfer.
Fixes https://github.com/raspberrypi/linux/issues/1842
dwc_otg: make nak_holdoff work as intended with empty queues
If URBs reading from non-periodic split endpoints were dequeued and
the last transfer from the endpoint was a NAK handshake, the resulting
qh->nak_frame value was stale which would result in unnecessarily long
polling intervals for the first subsequent transfer with a fresh URB.
Fixup qh->nak_frame in dwc_otg_hcd_urb_dequeue and also guard against
a case where a single URB is submitted to the endpoint, a NAK was
received on the transfer immediately prior to receiving data and the
device subsequently resubmits another URB past the qh->nak_frame interval.
Fixes https://github.com/raspberrypi/linux/issues/1709
dwc_otg: fix split transaction data toggle handling around dequeues
See https://github.com/raspberrypi/linux/issues/1709
Fix several issues regarding endpoint state when URBs are dequeued
- If the HCD is disconnected, flush FIQ-enabled channels properly
- Save the data toggle state for bulk endpoints if the last transfer
from an endpoint where URBs were dequeued returned a data packet
- Reset hc->start_pkt_count properly in assign_and_init_hc()
dwc_otg: fix several potential crash sources
On root port disconnect events, the host driver state is cleared and
in-progress host channels are forcibly stopped. This doesn't play
well with the FIQ running in the background, so:
- Guard the disconnect callback with both the host spinlock and FIQ
spinlock
- Move qtd dereference in dwc_otg_handle_hc_fsm() after the early-out
so we don't dereference a qtd that has gone away
- Turn catch-all BUG()s in dwc_otg_handle_hc_fsm() into warnings.
dwc_otg: delete hcd->channel_lock
The lock serves no purpose as it is only held while the HCD spinlock
is already being held.
dwc_otg: remove unnecessary dma-mode channel halts on disconnect interrupt
Host channels are already halted in kill_urbs_in_qh_list() with the
subsequent interrupt processing behaving as if the URB was dequeued
via HCD callback.
There's no need to clobber the host channel registers a second time
as this exposes races between the driver and host channel resulting
in hcd->free_hc_list becoming corrupted.
dwcotg: Allow to build without FIQ on ARM64
Signed-off-by: popcornmix <popcornmix@gmail.com>
dwc_otg: make periodic scheduling behave properly for FS buses
If the root port is in full-speed mode, transfer times at 12mbit/s
would be calculated but matched against high-speed quotas.
Reinitialise hcd->frame_usecs[i] on each port enable event so that
full-speed bandwidth can be tracked sensibly.
Also, don't bother using the FIQ for transfers when in full-speed
mode - at the slower bus speed, interrupt frequency is reduced by
an order of magnitude.
Related issue: https://github.com/raspberrypi/linux/issues/2020
dwc_otg: fiq_fsm: Make isochronous compatibility checks work properly
Get rid of the spammy printk and local pointer mangling.
Also, there is a nominal benefit for using fiq_fsm for isochronous
transfers in FS mode (~1.1k IRQs per second vs 2.1k IRQs per second)
so remove the root port speed check.
dwc_otg: add module parameter int_ep_interval_min
Add a module parameter (defaulting to ignored) that clamps the polling rate
of high-speed Interrupt endpoints to a minimum microframe interval.
The parameter is modifiable at runtime as it is used when activating new
endpoints (such as on device connect).
dwc_otg: fiq_fsm: Add non-periodic TT exclusivity constraints
Certain hub types do not discriminate between pipe direction (IN or OUT)
when considering non-periodic transfers. Therefore these hubs get confused
if multiple transfers are issued in different directions with the same
device address and endpoint number.
Constrain queuing non-periodic split transactions so they are performed
serially in such cases.
Related: https://github.com/raspberrypi/linux/issues/2024
dwc_otg: Fixup change to DRIVER_ATTR interface
dwc_otg: Fix compilation warnings
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
USB_DWCOTG: Disable building dwc_otg as a module (#2265)
When dwc_otg is built as a module, build will fail with the following
error:
ERROR: "DWC_TASK_HI_SCHEDULE" [drivers/usb/host/dwc_otg/dwc_otg.ko] undefined!
scripts/Makefile.modpost:91: recipe for target '__modpost' failed
make[1]: *** [__modpost] Error 1
Makefile:1199: recipe for target 'modules' failed
make: *** [modules] Error 2
Even if the error is solved by including the missing
DWC_TASK_HI_SCHEDULE function, the kernel will panic when loading
dwc_otg.
As a workaround, simply prevent user from building dwc_otg as a module
as the current kernel does not support it.
See: https://github.com/raspberrypi/linux/issues/2258
Signed-off-by: Malik Olivier Boussejra <malik@boussejra.com>
dwc_otg: New timer API
dwc_otg: Fix removed ACCESS_ONCE->READ_ONCE
dwc_otg: don't unconditionally force host mode in dwc_otg_cil_init()
Add the ability to disable force_host_mode for those that want to use
dwc_otg in both device and host modes.
dwc_otg: Fix a regression when dequeueing isochronous transfers
In
282bed95 (dwc_otg: make nak_holdoff work as intended with empty queues)
the dequeue mechanism was changed to leave FIQ-enabled transfers to run
to completion - to avoid leaving hub TT buffers with stale packets lying
around.
This broke FIQ-accelerated isochronous transfers, as this then meant that
dozens of transfers were performed after the dequeue function returned.
Restore the state machine fence for isochronous transfers.
fiq_fsm: rewind DMA pointer for OUT transactions that fail (#2288)
See: https://github.com/raspberrypi/linux/issues/2140
dwc_otg: add smp_mb() to prevent driver state corruption on boot
Occasional crashes have been seen where the FIQ code dereferences
invalid/random pointers immediately after being set up, leading to
panic on boot.
The crash occurs as the FIQ code races against hcd_init_fiq() and
the hcd_init_fiq() code races against the outstanding memory stores
from dwc_otg_hcd_init(). Use explicit barriers after touching
driver state.
usb: dwc_otg: fix memory corruption in dwc_otg driver
[Upstream commit
51b1b6491752ac066ee8d32cc66042fcc955fef6]
The move from the staging tree to the main tree exposed a
longstanding memory corruption bug in the dwc2 driver. The
reordering of the driver initialization caused the dwc2 driver
to corrupt the initialization data of the sdhci driver on the
Raspberry Pi platform, which made the bug show up.
The error is in calling to_usb_device(hsotg->dev), since ->dev
is not a member of struct usb_device. The easiest fix is to
just remove the offending code, since it is not really needed.
Thanks to Stephen Warren for tracking down the cause of this.
Reported-by: Andre Heider <a.heider@gmail.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[lukas: port from upstream dwc2 to out-of-tree dwc_otg driver]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
usb: dwb_otg: Fix unreachable switch statement warning
This warning appears with GCC 7.3.0 from toolchains.bootlin.com:
../drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c: In function ‘fiq_fsm_update_hs_isoc’:
../drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c:595:61: warning: statement will never be executed [-Wswitch-unreachable]
st->hctsiz_copy.b.xfersize = nrpackets * st->hcchar_copy.b.mps;
~~~~~~~~~~~~~~~~~^~~~
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
dwc_otg: fiq_fsm: fix incorrect DMA register offset calculation
Rationalise the offset and update all call sites.
Fixes https://github.com/raspberrypi/linux/issues/2408
dwc_otg: fix bug with port_addr assignment for single-TT hubs
See https://github.com/raspberrypi/linux/issues/2734
The "Hub Port" field in the split transaction packet was always set
to 1 for single-TT hubs. The majority of single-TT hub products
apparently ignore this field and broadcast to all downstream enabled
ports, which masked the issue. A subset of hub devices apparently
need the port number to be exact or split transactions will fail.
usb: dwc_otg: Clean up build warnings on 64bit kernels
No functional changes. Almost all are changes to logging lines.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
usb: dwc_otg: Use dma allocation for mphi dummy_send buffer
The FIQ driver used a kzalloc'ed buffer for dummy_send,
passing a kernel virtual address to the hardware block.
The buffer is only ever used for a dummy read, so it
should be harmless, but there is the chance that it will
cause exceptions.
Use a dma allocation so that we have a genuine bus address,
and read from that.
Free the allocation when done for good measure.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
dwc_otg: only do_split when we actually need to do a split
The previous test would fail if the root port was in fullspeed mode
and there was a hub between the FS device and the root port. While
the transfer worked, the schedule mangling performed for high-speed
split transfers would break leading to an 8ms polling interval.
dwc_otg: fix locking around dequeueing and killing URBs
kill_urbs_in_qh_list() is practically only ever called with the fiq lock
already held, so don't spinlock twice in the case where we need to cancel
an isochronous transfer.
Also fix up a case where the global interrupt register could be read with
the fiq lock not held.
Fixes the deadlock seen in https://github.com/raspberrypi/linux/issues/2907
ARM64/DWC_OTG: Port dwc_otg driver to ARM64
In ARM64, the FIQ mechanism used by this driver is not current
implemented. As a workaround, reqular IRQ is used instead
of FIQ.
In a separate change, the IRQ-CPU mapping is round robined
on ARM64 to increase concurrency and allow multiple interrupts
to be serviced at a time. This reduces the need for FIQ.
Tests Run:
This mechanism is most likely to break when multiple USB devices
are attached at the same time. So the system was tested under
stress.
Devices:
1. USB Speakers playing back a FLAC audio through VLC
at 96KHz.(Higher then typically, but supported on my speakers).
2. sftp transferring large files through the buildin ethernet
connection which is connected through USB.
3. Keyboard and mouse attached and being used.
Although I do occasionally hear some glitches, the music seems to
play quite well.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
usb: dwc_otg: Clean up interrupt claiming code
The FIQ/IRQ interrupt number identification code is scattered through
the dwc_otg driver. Rationalise it, simplifying the code and solving
an existing issue.
See: https://github.com/raspberrypi/linux/issues/2612
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
dwc_otg: Choose appropriate IRQ handover strategy
2711 has no MPHI peripheral, but the ARM Control block can fake
interrupts. Use the size of the DTB "mphi" reg block to determine
which is required.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
usb: host: dwc_otg: fix compiling in separate directory
The dwc_otg Makefile does not respect the O=path argument correctly:
include paths in CFLAGS are given relatively to object path, not source
path. Compiling in a separate directory yields #include errors.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
dwc_otg: use align_buf for small IN control transfers (#3150)
The hardware will do a 4-byte write to memory on any IN packet received
that is between 1 and 3 bytes long. This tramples memory in the uvcvideo
driver, as it uses a sequence of 1- and 2-byte control transfers to
query the min/max/range/step of each individual camera control and
gives us buffers that are offsets into a struct.
Catch small control transfers in the data phase and use the align_buf
to bounce the correct number of bytes into the URB's buffer.
In general, short packets on non-control endpoints should be OK as URBs
should have enough buffer space for a wMaxPacket size transfer.
See: https://github.com/raspberrypi/linux/issues/3148
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
popcornmix [Sun, 12 May 2013 11:24:19 +0000 (12:24 +0100)]
Main bcm2708/bcm2709 linux port
Signed-off-by: popcornmix <popcornmix@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
bcm2709: Drop platform smp and timer init code
irq-bcm2836 handles this through these functions:
bcm2835_init_local_timer_frequency()
bcm2836_arm_irqchip_smp_init()
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
bcm270x: Use watchdog for reboot/poweroff
The watchdog driver already has support for reboot/poweroff.
Make use of this and remove the code from the platform files.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
board_bcm2835: Remove coherent dma pool increase - API has gone
notro [Thu, 10 Jul 2014 11:59:47 +0000 (13:59 +0200)]
pinctrl-bcm2835: Set base to 0 give expected gpio numbering
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Phil Elwell [Fri, 29 Sep 2017 09:32:19 +0000 (10:32 +0100)]
amba_pl011: Add cts-event-workaround DT property
The BCM2835 PL011 implementation seems to have a bug that can lead to a
transmission lockup if CTS changes frequently. A workaround was added to
the driver with a vendor-specific flag to enable it, but this flag is
currently not set for ARM implementations.
Add a "cts-event-workaround" property to Pi DTBs and use the presence
of that property to force the flag to be enabled in the driver.
See: https://github.com/raspberrypi/linux/issues/1280
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Phil Elwell [Fri, 29 Sep 2017 09:32:19 +0000 (10:32 +0100)]
amba_pl011: Insert mb() for correct FIFO handling
The pl011 register accessor functions use the _relaxed versions of the
standard readl() and writel() functions, meaning that there are no
automatic memory barriers. When polling a FIFO status register to check
for fullness, it is necessary to ensure that any outstanding writes have
completed; otherwise the flags are effectively stale, making it possible
that the next write is to a full FIFO.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Phil Elwell [Wed, 1 Mar 2017 16:07:39 +0000 (16:07 +0000)]
amba_pl011: Round input clock up
The UART clock is initialised to be as close to the requested
frequency as possible without exceeding it. Now that there is a
clock manager that returns the actual frequencies, an expected
48MHz clock is reported as
47999625. If the requested baudrate
== requested clock/16, there is no headroom and the slight
reduction in actual clock rate results in failure.
Detect cases where it looks like a "round" clock was chosen and
adjust the reported clock to match that "round" value. As the
code comment says:
/*
* If increasing a clock by less than 0.1% changes it
* from ..999.. to ..000.., round up.
*/
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Phil Elwell [Tue, 23 Feb 2016 17:26:48 +0000 (17:26 +0000)]
amba_pl011: Don't use DT aliases for numbering
The pl011 driver looks for DT aliases of the form "serial<n>",
and if found uses <n> as the device ID. This can cause
/dev/ttyAMA0 to become /dev/ttyAMA1, which is confusing if the
other serial port is provided by the 8250 driver which doesn't
use the same logic.
Phil Elwell [Tue, 17 Oct 2017 14:04:29 +0000 (15:04 +0100)]
lan78xx: Enable LEDs and auto-negotiation
For applications of the LAN78xx that don't have valid programmed
EEPROMs or OTPs, enabling both LEDs and auto-negotiation by default
seems reasonable.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Phil Elwell [Tue, 23 Jan 2018 16:52:45 +0000 (16:52 +0000)]
irqchip: irq-bcm2836: Remove regmap and syscon use
The syscon node defines a register range that duplicates that used by
the local_intc node on bcm2836/7. Since irq-bcm2835 and irq-bcm2836 are
built in and always present together (both drivers are enabled by
CONFIG_ARCH_BCM2835), it is possible to replace the syscon usage with a
global variable that simplifies the code. Doing so does lose the
locking provided by regmap, but as only one side is using the regmap
interface (irq-bcm2835 uses readl and write) there is no loss of
atomicity.
See: https://github.com/raspberrypi/firmware/issues/926
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Phil Elwell [Thu, 23 Mar 2017 10:06:56 +0000 (10:06 +0000)]
ASoC: Add prompt for ICS43432 codec
Without a prompt string, a config setting can't be included in a
defconfig. Give CONFIG_SND_SOC_ICS43432 a prompt so that Pi soundcards
can use the driver.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Eric Anholt [Fri, 19 Dec 2014 00:07:15 +0000 (16:07 -0800)]
mm: Remove the PFN busy warning
See commit
dae803e165a11bc88ca8dbc07a11077caf97bbcb -- the warning is
expected sometimes when using CMA. However, that commit still spams
my kernel log with these warnings.
Signed-off-by: Eric Anholt <eric@anholt.net>
Noralf Trønnes [Tue, 1 Nov 2016 14:15:41 +0000 (15:15 +0100)]
i2c: bcm2835: Add debug support
This adds a debug module parameter to aid in debugging transfer issues
by printing info to the kernel log. When enabled, status values are
collected in the interrupt routine and msg info in
bcm2835_i2c_start_transfer(). This is done in a way that tries to avoid
affecting timing. Having printk in the isr can mask issues.
debug values (additive):
1: Print info on error
2: Print info on all transfers
3: Print messages before transfer is started
The value can be changed at runtime:
/sys/module/i2c_bcm2835/parameters/debug
Example output, debug=3:
[ 747.114448] bcm2835_i2c_xfer: msg(1/2) write addr=0x54, len=2 flags= [i2c1]
[ 747.114463] bcm2835_i2c_xfer: msg(2/2) read addr=0x54, len=32 flags= [i2c1]
[ 747.117809] start_transfer: msg(1/2) write addr=0x54, len=2 flags= [i2c1]
[ 747.117825] isr: remain=2, status=0x30000055 : TA TXW TXD TXE [i2c1]
[ 747.117839] start_transfer: msg(2/2) read addr=0x54, len=32 flags= [i2c1]
[ 747.117849] isr: remain=32, status=0xd0000039 : TA RXR TXD RXD [i2c1]
[ 747.117861] isr: remain=20, status=0xd0000039 : TA RXR TXD RXD [i2c1]
[ 747.117870] isr: remain=8, status=0x32 : DONE TXD RXD [i2c1]
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Claggy3 [Sat, 11 Feb 2017 14:00:30 +0000 (14:00 +0000)]
Update vfpmodule.c
Christopher Alexander Tobias Schulze - May 2, 2015, 11:57 a.m.
This patch fixes a problem with VFP state save and restore related
to exception handling (panic with message "BUG: unsupported FP
instruction in kernel mode") present on VFP11 floating point units
(as used with ARM1176JZF-S CPUs, e.g. on first generation Raspberry
Pi boards). This patch was developed and discussed on
https://github.com/raspberrypi/linux/issues/859
A precondition to see the crashes is that floating point exception
traps are enabled. In this case, the VFP11 might determine that a FPU
operation needs to trap at a point in time when it is not possible to
signal this to the ARM11 core any more. The VFP11 will then set the
FPEXC.EX bit and store the trapped opcode in FPINST. (In some cases,
a second opcode might have been accepted by the VFP11 before the
exception was detected and could be reported to the ARM11 - in this
case, the VFP11 also sets FPEXC.FP2V and stores the second opcode in
FPINST2.)
If FPEXC.EX is set, the VFP11 will "bounce" the next FPU opcode issued
by the ARM11 CPU, which will be seen by the ARM11 as an undefined opcode
trap. The VFP support code examines the FPEXC.EX and FPEXC.FP2V bits
to decide what actions to take, i.e., whether to emulate the opcodes
found in FPINST and FPINST2, and whether to retry the bounced instruction.
If a user space application has left the VFP11 in this "pending trap"
state, the next FPU opcode issued to the VFP11 might actually be the
VSTMIA operation vfp_save_state() uses to store the FPU registers
to memory (in our test cases, when building the signal stack frame).
In this case, the kernel crashes as described above.
This patch fixes the problem by making sure that vfp_save_state() is
always entered with FPEXC.EX cleared. (The current value of FPEXC has
already been saved, so this does not corrupt the context. Clearing
FPEXC.EX has no effects on FPINST or FPINST2. Also note that many
callers already modify FPEXC by setting FPEXC.EN before invoking
vfp_save_state().)
This patch also addresses a second problem related to FPEXC.EX: After
returning from signal handling, the kernel reloads the VFP context
from the user mode stack. However, the current code explicitly clears
both FPEXC.EX and FPEXC.FP2V during reload. As VFP11 requires these
bits to be preserved, this patch disables clearing them for VFP
implementations belonging to architecture 1. There should be no
negative side effects: the user can set both bits by executing FPU
opcodes anyway, and while user code may now place arbitrary values
into FPINST and FPINST2 (e.g., non-VFP ARM opcodes) the VFP support
code knows which instructions can be emulated, and rejects other
opcodes with "unhandled bounce" messages, so there should be no
security impact from allowing reloading FPEXC.EX and FPEXC.FP2V.
Signed-off-by: Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net>
Phil Elwell [Thu, 9 Feb 2017 14:36:44 +0000 (14:36 +0000)]
sound: Demote deferral errors to INFO level
At present there is no mechanism to specify driver load order,
which can lead to deferrals and repeated retries until successful.
Since this situation is expected, reduce the dmesg level to
INFO and mention that the operation will be retried.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Eric Anholt [Tue, 10 May 2016 00:28:18 +0000 (17:28 -0700)]
clk: bcm2835: Mark GPIO clocks enabled at boot as critical.
These divide off of PLLD_PER and are used for the ethernet and wifi
PHYs source PLLs. Neither of them is currently represented by a phy
device that would grab the clock for us.
This keeps other drivers from killing the networking PHYs when they
disable their own clocks and trigger PLLD_PER's refcount going to 0.
v2: Skip marking as critical if they aren't on at boot.
Signed-off-by: Eric Anholt <eric@anholt.net>
Phil Elwell [Mon, 6 Mar 2017 09:06:18 +0000 (09:06 +0000)]
clk-bcm2835: Read max core clock from firmware
The VPU is responsible for managing the core clock, usually under
direction from the bcm2835-cpufreq driver but not via the clk-bcm2835
driver. Since the core frequency can change without warning, it is
safer to report the maximum clock rate to users of the core clock -
I2C, SPI and the mini UART - to err on the safe side when calculating
clock divisors.
If the DT node for the clock driver includes a reference to the
firmware node, use the firmware API to query the maximum core clock
instead of reading the divider registers.
Prior to this patch, a "100KHz" I2C bus was sometimes clocked at about
160KHz. In particular, switching to the 4.9 kernel was likely to break
SenseHAT usage on a Pi3.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Phil Elwell [Mon, 13 Feb 2017 17:20:08 +0000 (17:20 +0000)]
clk-bcm2835: Add claim-clocks property
The claim-clocks property can be used to prevent PLLs and dividers
from being marked as critical. It contains a vector of clock IDs,
as defined by dt-bindings/clock/bcm2835.h.
Use this mechanism to claim PLLD_DSI0, PLLD_DSI1, PLLH_AUX and
PLLH_PIX for the vc4_kms_v3d driver.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Phil Elwell [Mon, 13 Feb 2017 17:20:08 +0000 (17:20 +0000)]
clk-bcm2835: Mark used PLLs and dividers CRITICAL
The VPU configures and relies on several PLLs and dividers. Mark all
enabled dividers and their PLLs as CRITICAL to prevent the kernel from
switching them off.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
popcornmix [Tue, 6 Dec 2016 17:05:39 +0000 (17:05 +0000)]
bcm2835-rng: Avoid initialising if already enabled
Avoids the 0x40000 cycles of warmup again if firmware has already used it
Martin Sperl [Fri, 2 Sep 2016 15:45:27 +0000 (16:45 +0100)]
Register the clocks early during the boot process, so that special/critical clocks can get enabled early on in the boot process avoiding the risk of disabling a clock, pll_divider or pll when a claiming driver fails to install propperly - maybe it needs to defer.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
popcornmix [Wed, 9 Nov 2016 13:02:52 +0000 (13:02 +0000)]
bcm: Make RASPBERRYPI_POWER depend on PM
popcornmix [Tue, 5 Apr 2016 18:40:12 +0000 (19:40 +0100)]
reboot: Use power off rather than busy spinning when halt is requested
Noralf Trønnes [Fri, 7 Oct 2016 14:50:59 +0000 (16:50 +0200)]
watchdog: bcm2835: Support setting reboot partition
The Raspberry Pi firmware looks at the RSTS register to know which
partition to boot from. The reboot syscall command
LINUX_REBOOT_CMD_RESTART2 supports passing in a string argument.
Add support for passing in a partition number 0..63 to boot from.
Partition 63 is a special partiton indicating halt.
If the partition doesn't exist, the firmware falls back to partition 0.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Phil Elwell [Wed, 15 Jun 2016 15:48:41 +0000 (16:48 +0100)]
rtc: Add SPI alias for pcf2123 driver
Without this alias, Device Tree won't cause the driver
to be loaded.
See: https://github.com/raspberrypi/linux/pull/1510
popcornmix [Mon, 25 Jan 2016 17:25:12 +0000 (17:25 +0000)]
firmware: Updated mailbox header
Noralf Trønnes [Sat, 3 Oct 2015 20:22:55 +0000 (22:22 +0200)]
dmaengine: bcm2835: Load driver early and support legacy API
Load driver early since at least bcm2708_fb doesn't support deferred
probing and even if it did, we don't want the video driver deferred.
Support the legacy DMA API which is needed by bcm2708_fb.
Don't mask out channel 2.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Phil Elwell [Tue, 14 Jul 2015 09:26:09 +0000 (10:26 +0100)]
spi: spidev: Completely disable the spidev warning
An alternative strategy would be to use "rpi,spidev" instead, but that
would require many Raspberry Pi Device Tree changes.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Noralf Trønnes [Fri, 23 Oct 2015 14:26:55 +0000 (16:26 +0200)]
irqchip: irq-bcm2835: Add 2836 FIQ support
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Noralf Trønnes [Fri, 12 Jun 2015 17:01:05 +0000 (19:01 +0200)]
irqchip: bcm2835: Add FIQ support
Add a duplicate irq range with an offset on the hwirq's so the
driver can detect that enable_fiq() is used.
Tested with downstream dwc_otg USB controller driver.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Phil Elwell [Thu, 9 Feb 2017 14:33:30 +0000 (14:33 +0000)]
irq-bcm2836: Avoid "Invalid trigger warning"
Initialise the level for each IRQ to avoid a warning from the
arm arch timer code.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Phil Elwell [Fri, 4 Dec 2015 17:41:50 +0000 (17:41 +0000)]
irq-bcm2836: Prevent spurious interrupts, and trap them early
The old arch-specific IRQ macros included a dsb to ensure the
write to clear the mailbox interrupt completed before returning
from the interrupt. The BCM2836 irqchip driver needs the same
precaution to avoid spurious interrupts.
Spurious interrupts are still possible for other reasons,
though, so trap them early.
Phil Elwell [Fri, 13 Mar 2015 12:43:36 +0000 (12:43 +0000)]
Protect __release_resource against resources without parents
Without this patch, removing a device tree overlay can crash here.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
popcornmix [Tue, 26 Mar 2013 17:26:38 +0000 (17:26 +0000)]
Allow mac address to be set in smsc95xx
Signed-off-by: popcornmix <popcornmix@gmail.com>
Sam Nazarko [Fri, 1 Apr 2016 16:27:21 +0000 (17:27 +0100)]
smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 by default
See: http://forum.kodi.tv/showthread.php?tid=285288
Steve Glendinning [Thu, 19 Feb 2015 18:47:12 +0000 (18:47 +0000)]
smsx95xx: fix crimes against truesize
smsc95xx is adjusting truesize when it shouldn't, and following a recent patch from Eric this is now triggering warnings.
This patch stops smsc95xx from changing truesize.
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Phil Elwell [Mon, 29 Oct 2018 14:45:45 +0000 (14:45 +0000)]
Revert "rtc: pcf8523: properly handle oscillator stop bit"
This reverts commit
ede44c908d44b166a5b6bd7caacd105c2ff5a70f.
See: https://github.com/raspberrypi/firmware/issues/1065
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Dan Pasanen [Thu, 21 Sep 2017 14:55:42 +0000 (09:55 -0500)]
arm: partially revert
702b94bff3c50542a6e4ab9a4f4cef093262fe65
* Re-expose some dmi APIs for use in VCSM
Sasha Levin [Tue, 30 Jun 2020 20:21:55 +0000 (16:21 -0400)]
Linux 5.4.50
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Tue, 12 May 2020 08:22:44 +0000 (10:22 +0200)]
Revert "tty: hvc: Fix data abort due to race in hvc_open"
commit
cf9c94456ebafc6d75a834e58dfdc8ae71a3acbc upstream.
This reverts commit
e2bd1dcbe1aa34ff5570b3427c530e4332ecf0fe.
In discussion on the mailing list, it has been determined that this is
not the correct type of fix for this issue. Revert it so that we can do
this correctly.
Reported-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200428032601.22127-1-rananta@codeaurora.org
Cc: Raghavendra Rao Ananta <rananta@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zheng Bin [Fri, 21 Feb 2020 15:38:20 +0000 (07:38 -0800)]
xfs: add agf freeblocks verify in xfs_agf_verify
[ Upstream commit
d0c7feaf87678371c2c09b3709400be416b2dc62 ]
We recently used fuzz(hydra) to test XFS and automatically generate
tmp.img(XFS v5 format, but some metadata is wrong)
xfs_repair information(just one AG):
agf_freeblks 0, counted 3224 in ag 0
agf_longest
536874136, counted 3224 in ag 0
sb_fdblocks 613, counted 3228
Test as follows:
mount tmp.img tmpdir
cp file1M tmpdir
sync
In 4.19-stable, sync will stuck, the reason is:
xfs_mountfs
xfs_check_summary_counts
if ((!xfs_sb_version_haslazysbcount(&mp->m_sb) ||
XFS_LAST_UNMOUNT_WAS_CLEAN(mp)) &&
!xfs_fs_has_sickness(mp, XFS_SICK_FS_COUNTERS))
return 0; -->just return, incore sb_fdblocks still be 613
xfs_initialize_perag_data
cp file1M tmpdir -->ok(write file to pagecache)
sync -->stuck(write pagecache to disk)
xfs_map_blocks
xfs_iomap_write_allocate
while (count_fsb != 0) {
nimaps = 0;
while (nimaps == 0) { --> endless loop
nimaps = 1;
xfs_bmapi_write(..., &nimaps) --> nimaps becomes 0 again
xfs_bmapi_write
xfs_bmap_alloc
xfs_bmap_btalloc
xfs_alloc_vextent
xfs_alloc_fix_freelist
xfs_alloc_space_available -->fail(agf_freeblks is 0)
In linux-next, sync not stuck, cause commit
c2b3164320b5 ("xfs:
use the latest extent at writeback delalloc conversion time") remove
the above while, dmesg is as follows:
[ 55.250114] XFS (loop0): page discard on page
ffffea0008bc7380, inode 0x1b0c, offset 0.
Users do not know why this page is discard, the better soultion is:
1. Like xfs_repair, make sure sb_fdblocks is equal to counted
(xfs_initialize_perag_data did this, who is not called at this mount)
2. Add agf verify, if fail, will tell users to repair
This patch use the second soultion.
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Ren Xudong <renxudong1@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mikulas Patocka [Fri, 19 Jun 2020 15:51:34 +0000 (11:51 -0400)]
dm writecache: add cond_resched to loop in persistent_memory_claim()
commit
d35bd764e6899a7bea71958f08d16cea5bfa1919 upstream.
Add cond_resched() to a loop that fills in the mapper memory area
because the loop can be executed many times.
Fixes:
48debafe4f2fe ("dm: add writecache target")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huaisheng Ye [Fri, 12 Jun 2020 15:59:11 +0000 (23:59 +0800)]
dm writecache: correct uncommitted_block when discarding uncommitted entry
commit
39495b12ef1cf602e6abd350dce2ef4199906531 upstream.
When uncommitted entry has been discarded, correct wc->uncommitted_block
for getting the exact number.
Fixes:
48debafe4f2fe ("dm: add writecache target")
Cc: stable@vger.kernel.org
Signed-off-by: Huaisheng Ye <yehs1@lenovo.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Mon, 15 Jun 2020 13:21:13 +0000 (09:21 -0400)]
xprtrdma: Fix handling of RDMA_ERROR replies
commit
7b2182ec381f8ea15c7eb1266d6b5d7da620ad93 upstream.
The RPC client currently doesn't handle ERR_CHUNK replies correctly.
rpcrdma_complete_rqst() incorrectly passes a negative number to
xprt_complete_rqst() as the number of bytes copied. Instead, set
task->tk_status to the error value, and return zero bytes copied.
In these cases, return -EIO rather than -EREMOTEIO. The RPC client's
finite state machine doesn't know what to do with -EREMOTEIO.
Additional clean ups:
- Don't double-count RDMA_ERROR replies
- Remove a stale comment
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@kernel.vger.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Olga Kornievskaia [Wed, 24 Jun 2020 17:54:08 +0000 (13:54 -0400)]
NFSv4 fix CLOSE not waiting for direct IO compeletion
commit
d03727b248d0dae6199569a8d7b629a681154633 upstream.
Figuring out the root case for the REMOVE/CLOSE race and
suggesting the solution was done by Neil Brown.
Currently what happens is that direct IO calls hold a reference
on the open context which is decremented as an asynchronous task
in the nfs_direct_complete(). Before reference is decremented,
control is returned to the application which is free to close the
file. When close is being processed, it decrements its reference
on the open_context but since directIO still holds one, it doesn't
sent a close on the wire. It returns control to the application
which is free to do other operations. For instance, it can delete a
file. Direct IO is finally releasing its reference and triggering
an asynchronous close. Which races with the REMOVE. On the server,
REMOVE can be processed before the CLOSE, failing the REMOVE with
EACCES as the file is still opened.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Suggested-by: Neil Brown <neilb@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Mon, 22 Jun 2020 19:04:15 +0000 (15:04 -0400)]
pNFS/flexfiles: Fix list corruption if the mirror count changes
commit
8b04013737341442ed914b336cde866b902664ae upstream.
If the mirror count changes in the new layout we pick up inside
ff_layout_pg_init_write(), then we can end up adding the
request to the wrong mirror and corrupting the mirror->pg_list.
Fixes:
d600ad1f2bdb ("NFS41: pop some layoutget errors to application")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Thu, 25 Jun 2020 15:32:34 +0000 (11:32 -0400)]
SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()
commit
89a3c9f5b9f0bcaa9aea3e8b2a616fcaea9aad78 upstream.
@subbuf is an output parameter of xdr_buf_subsegment(). A survey of
call sites shows that @subbuf is always uninitialized before
xdr_buf_segment() is invoked by callers.
There are some execution paths through xdr_buf_subsegment() that do
not set all of the fields in @subbuf, leaving some pointer fields
containing garbage addresses. Subsequent processing of that buffer
then results in a page fault.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Mon, 1 Jun 2020 08:54:57 +0000 (11:54 +0300)]
sunrpc: fixed rollback in rpc_gssd_dummy_populate()
commit
b7ade38165ca0001c5a3bd5314a314abbbfbb1b7 upstream.
__rpc_depopulate(gssd_dentry) was lost on error path
cc: stable@vger.kernel.org
Fixes: commit
4b9a445e3eeb ("sunrpc: create a new dummy pipe for gssd to hold open")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 3 Jun 2020 10:19:58 +0000 (13:19 +0300)]
Staging: rtl8723bs: prevent buffer overflow in update_sta_support_rate()
commit
b65a2d8c8614386f7e8d38ea150749f8a862f431 upstream.
The "ie_len" variable is in the 0-255 range and it comes from the
network. If it's over NDIS_802_11_LENGTH_RATES_EX (16) then that will
lead to memory corruption.
Fixes:
554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200603101958.GA1845750@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wenhui Sheng [Thu, 18 Jun 2020 07:37:04 +0000 (15:37 +0800)]
drm/amdgpu: add fw release for sdma v5_0
commit
edfaf6fa73f15568d4337f208b2333f647c35810 upstream.
sdma fw isn't released when module exit
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Denis Efremov [Mon, 22 Jun 2020 20:31:22 +0000 (23:31 +0300)]
drm/radeon: fix fb_div check in ni_init_smc_spll_table()
commit
35f760b44b1b9cb16a306bdcc7220fbbf78c4789 upstream.
clk_s is checked twice in a row in ni_init_smc_spll_table().
fb_div should be checked instead.
Fixes:
69e0b57a91ad ("drm/radeon/kms: add dpm support for cayman (v5)")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Gomez [Mon, 18 May 2020 20:16:46 +0000 (22:16 +0200)]
drm: rcar-du: Fix build error
commit
5f9af404eec82981c4345c9943be48422234e7ab upstream.
Select DRM_KMS_HELPER dependency.
Build error when DRM_KMS_HELPER is not selected:
drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xd48): undefined reference to `drm_atomic_helper_bridge_duplicate_state'
drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xd50): undefined reference to `drm_atomic_helper_bridge_destroy_state'
drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xd70): undefined reference to `drm_atomic_helper_bridge_reset'
drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xdc8): undefined reference to `drm_atomic_helper_connector_reset'
drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xde0): undefined reference to `drm_helper_probe_single_connector_modes'
drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xe08): undefined reference to `drm_atomic_helper_connector_duplicate_state'
drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xe10): undefined reference to `drm_atomic_helper_connector_destroy_state'
Fixes:
c6a27fa41fab ("drm: rcar-du: Convert LVDS encoder code to bridge driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bernard Zhao [Sat, 20 Jun 2020 09:11:52 +0000 (17:11 +0800)]
drm/amd: fix potential memleak in err branch
commit
b5b78a6c8d8cb9c307bc6b16a754603424459d6e upstream.
The function kobject_init_and_add alloc memory like:
kobject_init_and_add->kobject_add_varg->kobject_set_name_vargs
->kvasprintf_const->kstrdup_const->kstrdup->kmalloc_track_caller
->kmalloc_slab, in err branch this memory not free. If use
kmemleak, this path maybe catched.
These changes are to add kobject_put in kobject_init_and_add
failed branch, fix potential memleak.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (VMware) [Mon, 22 Jun 2020 19:18:15 +0000 (15:18 -0400)]
ring-buffer: Zero out time extend if it is nested and not absolute
commit
097350d1c6e1f5808cae142006f18a0bbc57018d upstream.
Currently the ring buffer makes events that happen in interrupts that preempt
another event have a delta of zero. (Hopefully we can change this soon). But
this is to deal with the races of updating a global counter with lockless
and nesting functions updating deltas.
With the addition of absolute time stamps, the time extend didn't follow
this rule. A time extend can happen if two events happen longer than 2^27
nanoseconds appart, as the delta time field in each event is only 27 bits.
If that happens, then a time extend is injected with 2^59 bits of
nanoseconds to use (18 years). But if the 2^27 nanoseconds happen between
two events, and as it is writing the event, an interrupt triggers, it will
see the 2^27 difference as well and inject a time extend of its own. But a
recent change made the time extend logic not take into account the nesting,
and this can cause two time extend deltas to happen moving the time stamp
much further ahead than the current time. This gets all reset when the ring
buffer moves to the next page, but that can cause time to appear to go
backwards.
This was observed in a trace-cmd recording, and since the data is saved in a
file, with trace-cmd report --debug, it was possible to see that this indeed
did happen!
bash-52501 110d... 81778.908247: sched_switch: bash:52501 [120] S ==> swapper/110:0 [120] [
12770284:0x2e8:64]
<idle>-0 110d... 81778.908757: sched_switch: swapper/110:0 [120] R ==> bash:52501 [120] [509947:0x32c:64]
TIME EXTEND: delta:
306454770 length:0
bash-52501 110.... 81779.215212: sched_swap_numa: src_pid=52501 src_tgid=52388 src_ngid=52501 src_cpu=110 src_nid=2 dst_pid=52509 dst_tgid=52388 dst_ngid=52501 dst_cpu=49 dst_nid=1 [0:0x378:48]
TIME EXTEND: delta:
306458165 length:0
bash-52501 110dNh. 81779.521670: sched_wakeup: migration/110:565 [0] success=1 CPU:110 [0:0x3b4:40]
and at the next page, caused the time to go backwards:
bash-52504 110d... 81779.685411: sched_switch: bash:52504 [120] S ==> swapper/110:0 [120] [8347057:0xfb4:64]
CPU:110 [SUBBUFFER START] [
81779379165886:0x1320000]
<idle>-0 110dN.. 81779.379166: sched_wakeup: bash:52504 [120] success=1 CPU:110 [0:0x10:40]
<idle>-0 110d... 81779.379167: sched_switch: swapper/110:0 [120] R ==> bash:52504 [120] [1168:0x3c:64]
Link: https://lkml.kernel.org/r/20200622151815.345d1bf5@oasis.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes:
dc4e2801d400b ("ring-buffer: Redefine the unimplemented RINGBUF_TYPE_TIME_STAMP")
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masami Hiramatsu [Sat, 20 Jun 2020 03:46:03 +0000 (12:46 +0900)]
tracing: Fix event trigger to accept redundant spaces
commit
6784beada631800f2c5afd567e5628c843362cee upstream.
Fix the event trigger to accept redundant spaces in
the trigger input.
For example, these return -EINVAL
echo " traceon" > events/ftrace/print/trigger
echo "traceon if common_pid == 0" > events/ftrace/print/trigger
echo "disable_event:kmem:kmalloc " > events/ftrace/print/trigger
But these are hard to find what is wrong.
To fix this issue, use skip_spaces() to remove spaces
in front of actual tokens, and set NULL if there is no
token.
Link: http://lkml.kernel.org/r/159262476352.185015.5261566783045364186.stgit@devnote2
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes:
85f2b08268c0 ("tracing: Add basic event trigger framework")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin Gong [Fri, 22 May 2020 10:44:51 +0000 (18:44 +0800)]
arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range
commit
cfb12c8952f617df58d73d24161e539a035d82b0 upstream.
Correct ldo1 voltage range from wrong high group(3.0V~3.3V) to low group
(1.6V~1.9V) because the ldo1 should be 1.8V. Actually, two voltage groups
have been supported at bd718x7-regulator driver, hence, just corrrect the
voltage range to 1.6V~3.3V. For ldo2@0.8V, correct voltage range too.
Otherwise, ldo1 would be kept @3.0V and ldo2@0.9V which violate i.mx8mn
datasheet as the below warning log in kernel:
[ 0.995524] LDO1: Bringing 1800000uV into 3000000-3000000uV
[ 0.999196] LDO2: Bringing 800000uV into 900000-900000uV
Fixes:
3e44dd09736d ("arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support")
Cc: stable@vger.kernel.org
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin Gong [Fri, 22 May 2020 10:44:50 +0000 (18:44 +0800)]
arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range
commit
4fd6b5735c03c0955d93960d31f17d7144f5578f upstream.
Correct ldo1 voltage range from wrong high group(3.0V~3.3V) to low group
(1.6V~1.9V) because the ldo1 should be 1.8V. Actually, two voltage groups
have been supported at bd718x7-regulator driver, hence, just corrrect the
voltage range to 1.6V~3.3V. For ldo2@0.8V, correct voltage range too.
Otherwise, ldo1 would be kept @3.0V and ldo2@0.9V which violate i.mx8mm
datasheet as the below warning log in kernel:
[ 0.995524] LDO1: Bringing 1800000uV into 3000000-3000000uV
[ 0.999196] LDO2: Bringing 800000uV into 900000-900000uV
Fixes:
78cc25fa265d ("arm64: dts: imx8mm-evk: Add BD71847 PMIC")
Cc: stable@vger.kernel.org
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiping Ma [Mon, 11 May 2020 02:52:07 +0000 (10:52 +0800)]
arm64: perf: Report the PC value in REGS_ABI_32 mode
commit
8dfe804a4031ca6ba3a3efb2048534249b64f3a5 upstream.
A 32-bit perf querying the registers of a compat task using REGS_ABI_32
will receive zeroes from w15, when it expects to find the PC.
Return the PC value for register dwarf register 15 when returning register
values for a compat task to perf.
Cc: <stable@vger.kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jiping Ma <jiping.ma2@windriver.com>
Link: https://lore.kernel.org/r/1589165527-188401-1-git-send-email-jiping.ma2@windriver.com
[will: Shuffled code and added a comment]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Muchun Song [Fri, 26 Jun 2020 03:30:19 +0000 (20:30 -0700)]
mm/memcontrol.c: add missed css_put()
commit
3a98990ae2150277ed34d3b248c60e68bf2244b2 upstream.
We should put the css reference when memory allocation failed.
Link: http://lkml.kernel.org/r/20200614122653.98829-1-songmuchun@bytedance.com
Fixes:
f0a3a24b532d ("mm: memcg/slab: rework non-root kmem_cache lifecycle management")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Junxiao Bi [Fri, 26 Jun 2020 03:29:37 +0000 (20:29 -0700)]
ocfs2: fix panic on nfs server over ocfs2
commit
e5a15e17a78d58f933d17cafedfcf7486a29f5b4 upstream.
The following kernel panic was captured when running nfs server over
ocfs2, at that time ocfs2_test_inode_bit() was checking whether one
inode locating at "blkno" 5 was valid, that is ocfs2 root inode, its
"suballoc_slot" was OCFS2_INVALID_SLOT(65535) and it was allocted from
//global_inode_alloc, but here it wrongly assumed that it was got from per
slot inode alloctor which would cause array overflow and trigger kernel
panic.
BUG: unable to handle kernel paging request at
0000000000001088
IP: [<
ffffffff816f6898>] _raw_spin_lock+0x18/0xf0
PGD
1e06ba067 PUD
1e9e7d067 PMD 0
Oops: 0002 [#1] SMP
CPU: 6 PID: 24873 Comm: nfsd Not tainted 4.1.12-124.36.1.el6uek.x86_64 #2
Hardware name: Huawei CH121 V3/IT11SGCA1, BIOS 3.87 02/02/2018
RIP: _raw_spin_lock+0x18/0xf0
RSP: e02b:
ffff88005ae97908 EFLAGS:
00010206
RAX:
ffff88005ae98000 RBX:
0000000000001088 RCX:
0000000000000000
RDX:
0000000000020000 RSI:
0000000000000009 RDI:
0000000000001088
RBP:
ffff88005ae97928 R08:
0000000000000000 R09:
ffff880212878e00
R10:
0000000000007ff0 R11:
0000000000000000 R12:
0000000000001088
R13:
ffff8800063c0aa8 R14:
ffff8800650c27d0 R15:
000000000000ffff
FS:
0000000000000000(0000) GS:
ffff880218180000(0000) knlGS:
ffff880218180000
CS: e033 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000001088 CR3:
00000002033d0000 CR4:
0000000000042660
Call Trace:
igrab+0x1e/0x60
ocfs2_get_system_file_inode+0x63/0x3a0 [ocfs2]
ocfs2_test_inode_bit+0x328/0xa00 [ocfs2]
ocfs2_get_parent+0xba/0x3e0 [ocfs2]
reconnect_path+0xb5/0x300
exportfs_decode_fh+0xf6/0x2b0
fh_verify+0x350/0x660 [nfsd]
nfsd4_putfh+0x4d/0x60 [nfsd]
nfsd4_proc_compound+0x3d3/0x6f0 [nfsd]
nfsd_dispatch+0xe0/0x290 [nfsd]
svc_process_common+0x412/0x6a0 [sunrpc]
svc_process+0x123/0x210 [sunrpc]
nfsd+0xff/0x170 [nfsd]
kthread+0xcb/0xf0
ret_from_fork+0x61/0x90
Code: 83 c2 02 0f b7 f2 e8 18 dc 91 ff 66 90 eb bf 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 53 0f 1f 44 00 00 48 89 fb ba 00 00 02 00 <f0> 0f c1 17 89 d0 45 31 e4 45 31 ed c1 e8 10 66 39 d0 41 89 c6
RIP _raw_spin_lock+0x18/0xf0
CR2:
0000000000001088
---[ end trace
7264463cd1aac8f9 ]---
Kernel panic - not syncing: Fatal exception
Link: http://lkml.kernel.org/r/20200616183829.87211-4-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Junxiao Bi [Fri, 26 Jun 2020 03:29:40 +0000 (20:29 -0700)]
ocfs2: fix value of OCFS2_INVALID_SLOT
commit
9277f8334ffc719fe922d776444d6e4e884dbf30 upstream.
In the ocfs2 disk layout, slot number is 16 bits, but in ocfs2
implementation, slot number is 32 bits. Usually this will not cause any
issue, because slot number is converted from u16 to u32, but
OCFS2_INVALID_SLOT was defined as -1, when an invalid slot number from
disk was obtained, its value was (u16)-1, and it was converted to u32.
Then the following checking in get_local_system_inode will be always
skipped:
static struct inode **get_local_system_inode(struct ocfs2_super *osb,
int type,
u32 slot)
{
BUG_ON(slot == OCFS2_INVALID_SLOT);
...
}
Link: http://lkml.kernel.org/r/20200616183829.87211-5-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Junxiao Bi [Fri, 26 Jun 2020 03:29:33 +0000 (20:29 -0700)]
ocfs2: load global_inode_alloc
commit
7569d3c754e452769a5747eeeba488179e38a5da upstream.
Set global_inode_alloc as OCFS2_FIRST_ONLINE_SYSTEM_INODE, that will
make it load during mount. It can be used to test whether some
global/system inodes are valid. One use case is that nfsd will test
whether root inode is valid.
Link: http://lkml.kernel.org/r/20200616183829.87211-3-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Junxiao Bi [Fri, 26 Jun 2020 03:29:30 +0000 (20:29 -0700)]
ocfs2: avoid inode removal while nfsd is accessing it
commit
4cd9973f9ff69e37dd0ba2bd6e6423f8179c329a upstream.
Patch series "ocfs2: fix nfsd over ocfs2 issues", v2.
This is a series of patches to fix issues on nfsd over ocfs2. patch 1
is to avoid inode removed while nfsd access it patch 2 & 3 is to fix a
panic issue.
This patch (of 4):
When nfsd is getting file dentry using handle or parent dentry of some
dentry, one cluster lock is used to avoid inode removed from other node,
but it still could be removed from local node, so use a rw lock to avoid
this.
Link: http://lkml.kernel.org/r/20200616183829.87211-1-junxiao.bi@oracle.com
Link: http://lkml.kernel.org/r/20200616183829.87211-2-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Waiman Long [Fri, 26 Jun 2020 03:29:52 +0000 (20:29 -0700)]
mm/slab: use memzero_explicit() in kzfree()
commit
8982ae527fbef170ef298650c15d55a9ccd33973 upstream.
The kzfree() function is normally used to clear some sensitive
information, like encryption keys, in the buffer before freeing it back to
the pool. Memset() is currently used for buffer clearing. However
unlikely, there is still a non-zero probability that the compiler may
choose to optimize away the memory clearing especially if LTO is being
used in the future.
To make sure that this optimization will never happen,
memzero_explicit(), which is introduced in v3.18, is now used in
kzfree() to future-proof it.
Link: http://lkml.kernel.org/r/20200616154311.12314-2-longman@redhat.com
Fixes:
3ef0e5ba4673 ("slab: introduce kzfree()")
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Mon, 15 Jun 2020 17:48:58 +0000 (18:48 +0100)]
btrfs: fix failure of RWF_NOWAIT write into prealloc extent beyond eof
commit
4b1946284dd6641afdb9457101056d9e6ee6204c upstream.
If we attempt to write to prealloc extent located after eof using a
RWF_NOWAIT write, we always fail with -EAGAIN.
We do actually check if we have an allocated extent for the write at
the start of btrfs_file_write_iter() through a call to check_can_nocow(),
but later when we go into the actual direct IO write path we simply
return -EAGAIN if the write starts at or beyond EOF.
Trivial to reproduce:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ touch /mnt/foo
$ chattr +C /mnt/foo
$ xfs_io -d -c "pwrite -S 0xab 0 64K" /mnt/foo
wrote 65536/65536 bytes at offset 0
64 KiB, 16 ops; 0.0004 sec (135.575 MiB/sec and 34707.1584 ops/sec)
$ xfs_io -c "falloc -k 64K 1M" /mnt/foo
$ xfs_io -d -c "pwrite -N -V 1 -S 0xfe -b 64K 64K 64K" /mnt/foo
pwrite: Resource temporarily unavailable
On xfs and ext4 the write succeeds, as expected.
Fix this by removing the wrong check at btrfs_direct_IO().
Fixes:
edf064e7c6fec3 ("btrfs: nowait aio support")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Mon, 15 Jun 2020 09:38:44 +0000 (10:38 +0100)]
btrfs: check if a log root exists before locking the log_mutex on unlink
commit
e7a79811d0db136dc2d336b56d54cf1b774ce972 upstream.
This brings back an optimization that commit
e678934cbe5f02 ("btrfs:
Remove unnecessary check from join_running_log_trans") removed, but in
a different form. So it's almost equivalent to a revert.
That commit removed an optimization where we avoid locking a root's
log_mutex when there is no log tree created in the current transaction.
The affected code path is triggered through unlink operations.
That commit was based on the assumption that the optimization was not
necessary because we used to have the following checks when the patch
was authored:
int btrfs_del_dir_entries_in_log(...)
{
(...)
if (dir->logged_trans < trans->transid)
return 0;
ret = join_running_log_trans(root);
(...)
}
int btrfs_del_inode_ref_in_log(...)
{
(...)
if (inode->logged_trans < trans->transid)
return 0;
ret = join_running_log_trans(root);
(...)
}
However before that patch was merged, another patch was merged first which
replaced those checks because they were buggy.
That other patch corresponds to commit
803f0f64d17769 ("Btrfs: fix fsync
not persisting dentry deletions due to inode evictions"). The assumption
that if the logged_trans field of an inode had a smaller value then the
current transaction's generation (transid) meant that the inode was not
logged in the current transaction was only correct if the inode was not
evicted and reloaded in the current transaction. So the corresponding bug
fix changed those checks and replaced them with the following helper
function:
static bool inode_logged(struct btrfs_trans_handle *trans,
struct btrfs_inode *inode)
{
if (inode->logged_trans == trans->transid)
return true;
if (inode->last_trans == trans->transid &&
test_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &inode->runtime_flags) &&
!test_bit(BTRFS_FS_LOG_RECOVERING, &trans->fs_info->flags))
return true;
return false;
}
So if we have a subvolume without a log tree in the current transaction
(because we had no fsyncs), every time we unlink an inode we can end up
trying to lock the log_mutex of the root through join_running_log_trans()
twice, once for the inode being unlinked (by btrfs_del_inode_ref_in_log())
and once for the parent directory (with btrfs_del_dir_entries_in_log()).
This means if we have several unlink operations happening in parallel for
inodes in the same subvolume, and the those inodes and/or their parent
inode were changed in the current transaction, we end up having a lot of
contention on the log_mutex.
The test robots from intel reported a -30.7% performance regression for
a REAIM test after commit
e678934cbe5f02 ("btrfs: Remove unnecessary check
from join_running_log_trans").
So just bring back the optimization to join_running_log_trans() where we
check first if a log root exists before trying to lock the log_mutex. This
is done by checking for a bit that is set on the root when a log tree is
created and removed when a log tree is freed (at transaction commit time).
Commit
e678934cbe5f02 ("btrfs: Remove unnecessary check from
join_running_log_trans") was merged in the 5.4 merge window while commit
803f0f64d17769 ("Btrfs: fix fsync not persisting dentry deletions due to
inode evictions") was merged in the 5.3 merge window. But the first
commit was actually authored before the second commit (May 23 2019 vs
June 19 2019).
Reported-by: kernel test robot <rong.a.chen@intel.com>
Link: https://lore.kernel.org/lkml/20200611090233.GL12456@shao2-debian/
Fixes:
e678934cbe5f02 ("btrfs: Remove unnecessary check from join_running_log_trans")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Mon, 8 Jun 2020 12:32:55 +0000 (13:32 +0100)]
btrfs: fix data block group relocation failure due to concurrent scrub
commit
432cd2a10f1c10cead91fe706ff5dc52f06d642a upstream.
When running relocation of a data block group while scrub is running in
parallel, it is possible that the relocation will fail and abort the
current transaction with an -EINVAL error:
[134243.988595] BTRFS info (device sdc): found 14 extents, stage: move data extents
[134243.999871] ------------[ cut here ]------------
[134244.000741] BTRFS: Transaction aborted (error -22)
[134244.001692] WARNING: CPU: 0 PID: 26954 at fs/btrfs/ctree.c:1071 __btrfs_cow_block+0x6a7/0x790 [btrfs]
[134244.003380] Modules linked in: btrfs blake2b_generic xor raid6_pq (...)
[134244.012577] CPU: 0 PID: 26954 Comm: btrfs Tainted: G W 5.6.0-rc7-btrfs-next-58 #5
[134244.014162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[134244.016184] RIP: 0010:__btrfs_cow_block+0x6a7/0x790 [btrfs]
[134244.017151] Code: 48 c7 c7 (...)
[134244.020549] RSP: 0018:
ffffa41607863888 EFLAGS:
00010286
[134244.021515] RAX:
0000000000000000 RBX:
ffff9614bdfe09c8 RCX:
0000000000000000
[134244.022822] RDX:
0000000000000001 RSI:
ffffffffb3d63980 RDI:
0000000000000001
[134244.024124] RBP:
ffff961589e8c000 R08:
0000000000000000 R09:
0000000000000001
[134244.025424] R10:
ffffffffc0ae5955 R11:
0000000000000000 R12:
ffff9614bd530d08
[134244.026725] R13:
ffff9614ced41b88 R14:
ffff9614bdfe2a48 R15:
0000000000000000
[134244.028024] FS:
00007f29b63c08c0(0000) GS:
ffff9615ba600000(0000) knlGS:
0000000000000000
[134244.029491] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[134244.030560] CR2:
00007f4eb339b000 CR3:
0000000130d6e006 CR4:
00000000003606f0
[134244.031997] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[134244.033153] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[134244.034484] Call Trace:
[134244.034984] btrfs_cow_block+0x12b/0x2b0 [btrfs]
[134244.035859] do_relocation+0x30b/0x790 [btrfs]
[134244.036681] ? do_raw_spin_unlock+0x49/0xc0
[134244.037460] ? _raw_spin_unlock+0x29/0x40
[134244.038235] relocate_tree_blocks+0x37b/0x730 [btrfs]
[134244.039245] relocate_block_group+0x388/0x770 [btrfs]
[134244.040228] btrfs_relocate_block_group+0x161/0x2e0 [btrfs]
[134244.041323] btrfs_relocate_chunk+0x36/0x110 [btrfs]
[134244.041345] btrfs_balance+0xc06/0x1860 [btrfs]
[134244.043382] ? btrfs_ioctl_balance+0x27c/0x310 [btrfs]
[134244.045586] btrfs_ioctl_balance+0x1ed/0x310 [btrfs]
[134244.045611] btrfs_ioctl+0x1880/0x3760 [btrfs]
[134244.049043] ? do_raw_spin_unlock+0x49/0xc0
[134244.049838] ? _raw_spin_unlock+0x29/0x40
[134244.050587] ? __handle_mm_fault+0x11b3/0x14b0
[134244.051417] ? ksys_ioctl+0x92/0xb0
[134244.052070] ksys_ioctl+0x92/0xb0
[134244.052701] ? trace_hardirqs_off_thunk+0x1a/0x1c
[134244.053511] __x64_sys_ioctl+0x16/0x20
[134244.054206] do_syscall_64+0x5c/0x280
[134244.054891] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[134244.055819] RIP: 0033:0x7f29b51c9dd7
[134244.056491] Code: 00 00 00 (...)
[134244.059767] RSP: 002b:
00007ffcccc1dd08 EFLAGS:
00000202 ORIG_RAX:
0000000000000010
[134244.061168] RAX:
ffffffffffffffda RBX:
0000000000000001 RCX:
00007f29b51c9dd7
[134244.062474] RDX:
00007ffcccc1dda0 RSI:
00000000c4009420 RDI:
0000000000000003
[134244.063771] RBP:
0000000000000003 R08:
00005565cea4b000 R09:
0000000000000000
[134244.065032] R10:
0000000000000541 R11:
0000000000000202 R12:
00007ffcccc2060a
[134244.066327] R13:
00007ffcccc1dda0 R14:
0000000000000002 R15:
00007ffcccc1dec0
[134244.067626] irq event stamp: 0
[134244.068202] hardirqs last enabled at (0): [<
0000000000000000>] 0x0
[134244.069351] hardirqs last disabled at (0): [<
ffffffffb2abdedf>] copy_process+0x74f/0x2020
[134244.070909] softirqs last enabled at (0): [<
ffffffffb2abdedf>] copy_process+0x74f/0x2020
[134244.072392] softirqs last disabled at (0): [<
0000000000000000>] 0x0
[134244.073432] ---[ end trace
bd7c03622e0b0a99 ]---
The -EINVAL error comes from the following chain of function calls:
__btrfs_cow_block() <-- aborts the transaction
btrfs_reloc_cow_block()
replace_file_extents()
get_new_location() <-- returns -EINVAL
When relocating a data block group, for each allocated extent of the block
group, we preallocate another extent (at prealloc_file_extent_cluster()),
associated with the data relocation inode, and then dirty all its pages.
These preallocated extents have, and must have, the same size that extents
from the data block group being relocated have.
Later before we start the relocation stage that updates pointers (bytenr
field of file extent items) to point to the the new extents, we trigger
writeback for the data relocation inode. The expectation is that writeback
will write the pages to the previously preallocated extents, that it
follows the NOCOW path. That is generally the case, however, if a scrub
is running it may have turned the block group that contains those extents
into RO mode, in which case writeback falls back to the COW path.
However in the COW path instead of allocating exactly one extent with the
expected size, the allocator may end up allocating several smaller extents
due to free space fragmentation - because we tell it at cow_file_range()
that the minimum allocation size can match the filesystem's sector size.
This later breaks the relocation's expectation that an extent associated
to a file extent item in the data relocation inode has the same size as
the respective extent pointed by a file extent item in another tree - in
this case the extent to which the relocation inode poins to is smaller,
causing relocation.c:get_new_location() to return -EINVAL.
For example, if we are relocating a data block group X that has a logical
address of X and the block group has an extent allocated at the logical
address X + 128KiB with a size of 64KiB:
1) At prealloc_file_extent_cluster() we allocate an extent for the data
relocation inode with a size of 64KiB and associate it to the file
offset 128KiB (X + 128KiB - X) of the data relocation inode. This
preallocated extent was allocated at block group Z;
2) A scrub running in parallel turns block group Z into RO mode and
starts scrubing its extents;
3) Relocation triggers writeback for the data relocation inode;
4) When running delalloc (btrfs_run_delalloc_range()), we try first the
NOCOW path because the data relocation inode has BTRFS_INODE_PREALLOC
set in its flags. However, because block group Z is in RO mode, the
NOCOW path (run_delalloc_nocow()) falls back into the COW path, by
calling cow_file_range();
5) At cow_file_range(), in the first iteration of the while loop we call
btrfs_reserve_extent() to allocate a 64KiB extent and pass it a minimum
allocation size of 4KiB (fs_info->sectorsize). Due to free space
fragmentation, btrfs_reserve_extent() ends up allocating two extents
of 32KiB each, each one on a different iteration of that while loop;
6) Writeback of the data relocation inode completes;
7) Relocation proceeds and ends up at relocation.c:replace_file_extents(),
with a leaf which has a file extent item that points to the data extent
from block group X, that has a logical address (bytenr) of X + 128KiB
and a size of 64KiB. Then it calls get_new_location(), which does a
lookup in the data relocation tree for a file extent item starting at
offset 128KiB (X + 128KiB - X) and belonging to the data relocation
inode. It finds a corresponding file extent item, however that item
points to an extent that has a size of 32KiB, which doesn't match the
expected size of 64KiB, resuling in -EINVAL being returned from this
function and propagated up to __btrfs_cow_block(), which aborts the
current transaction.
To fix this make sure that at cow_file_range() when we call the allocator
we pass it a minimum allocation size corresponding the desired extent size
if the inode belongs to the data relocation tree, otherwise pass it the
filesystem's sector size as the minimum allocation size.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Mon, 8 Jun 2020 12:33:05 +0000 (13:33 +0100)]
btrfs: fix bytes_may_use underflow when running balance and scrub in parallel
commit
6bd335b469f945f75474c11e3f577f85409f39c3 upstream.
When balance and scrub are running in parallel it is possible to end up
with an underflow of the bytes_may_use counter of the data space_info
object, which triggers a warning like the following:
[134243.793196] BTRFS info (device sdc): relocating block group
1104150528 flags data
[134243.806891] ------------[ cut here ]------------
[134243.807561] WARNING: CPU: 1 PID: 26884 at fs/btrfs/space-info.h:125 btrfs_add_reserved_bytes+0x1da/0x280 [btrfs]
[134243.808819] Modules linked in: btrfs blake2b_generic xor (...)
[134243.815779] CPU: 1 PID: 26884 Comm: kworker/u8:8 Tainted: G W 5.6.0-rc7-btrfs-next-58 #5
[134243.816944] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[134243.818389] Workqueue: writeback wb_workfn (flush-btrfs-108483)
[134243.819186] RIP: 0010:btrfs_add_reserved_bytes+0x1da/0x280 [btrfs]
[134243.819963] Code: 0b f2 85 (...)
[134243.822271] RSP: 0018:
ffffa4160aae7510 EFLAGS:
00010287
[134243.822929] RAX:
000000000000c000 RBX:
ffff96159a8c1000 RCX:
0000000000000000
[134243.823816] RDX:
0000000000008000 RSI:
0000000000000000 RDI:
ffff96158067a810
[134243.824742] RBP:
ffff96158067a800 R08:
0000000000000001 R09:
0000000000000000
[134243.825636] R10:
ffff961501432a40 R11:
0000000000000000 R12:
000000000000c000
[134243.826532] R13:
0000000000000001 R14:
ffffffffffff4000 R15:
ffff96158067a810
[134243.827432] FS:
0000000000000000(0000) GS:
ffff9615baa00000(0000) knlGS:
0000000000000000
[134243.828451] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[134243.829184] CR2:
000055bd7e414000 CR3:
00000001077be004 CR4:
00000000003606e0
[134243.830083] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[134243.830975] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[134243.831867] Call Trace:
[134243.832211] find_free_extent+0x4a0/0x16c0 [btrfs]
[134243.832846] btrfs_reserve_extent+0x91/0x180 [btrfs]
[134243.833487] cow_file_range+0x12d/0x490 [btrfs]
[134243.834080] fallback_to_cow+0x82/0x1b0 [btrfs]
[134243.834689] ? release_extent_buffer+0x121/0x170 [btrfs]
[134243.835370] run_delalloc_nocow+0x33f/0xa30 [btrfs]
[134243.836032] btrfs_run_delalloc_range+0x1ea/0x6d0 [btrfs]
[134243.836725] ? find_lock_delalloc_range+0x221/0x250 [btrfs]
[134243.837450] writepage_delalloc+0xe8/0x150 [btrfs]
[134243.838059] __extent_writepage+0xe8/0x4c0 [btrfs]
[134243.838674] extent_write_cache_pages+0x237/0x530 [btrfs]
[134243.839364] extent_writepages+0x44/0xa0 [btrfs]
[134243.839946] do_writepages+0x23/0x80
[134243.840401] __writeback_single_inode+0x59/0x700
[134243.841006] writeback_sb_inodes+0x267/0x5f0
[134243.841548] __writeback_inodes_wb+0x87/0xe0
[134243.842091] wb_writeback+0x382/0x590
[134243.842574] ? wb_workfn+0x4a2/0x6c0
[134243.843030] wb_workfn+0x4a2/0x6c0
[134243.843468] process_one_work+0x26d/0x6a0
[134243.843978] worker_thread+0x4f/0x3e0
[134243.844452] ? process_one_work+0x6a0/0x6a0
[134243.844981] kthread+0x103/0x140
[134243.845400] ? kthread_create_worker_on_cpu+0x70/0x70
[134243.846030] ret_from_fork+0x3a/0x50
[134243.846494] irq event stamp: 0
[134243.846892] hardirqs last enabled at (0): [<
0000000000000000>] 0x0
[134243.847682] hardirqs last disabled at (0): [<
ffffffffb2abdedf>] copy_process+0x74f/0x2020
[134243.848687] softirqs last enabled at (0): [<
ffffffffb2abdedf>] copy_process+0x74f/0x2020
[134243.849913] softirqs last disabled at (0): [<
0000000000000000>] 0x0
[134243.850698] ---[ end trace
bd7c03622e0b0a96 ]---
[134243.851335] ------------[ cut here ]------------
When relocating a data block group, for each extent allocated in the
block group we preallocate another extent with the same size for the
data relocation inode (we do it at prealloc_file_extent_cluster()).
We reserve space by calling btrfs_check_data_free_space(), which ends
up incrementing the data space_info's bytes_may_use counter, and
then call btrfs_prealloc_file_range() to allocate the extent, which
always decrements the bytes_may_use counter by the same amount.
The expectation is that writeback of the data relocation inode always
follows a NOCOW path, by writing into the preallocated extents. However,
when starting writeback we might end up falling back into the COW path,
because the block group that contains the preallocated extent was turned
into RO mode by a scrub running in parallel. The COW path then calls the
extent allocator which ends up calling btrfs_add_reserved_bytes(), and
this function decrements the bytes_may_use counter of the data space_info
object by an amount corresponding to the size of the allocated extent,
despite we haven't previously incremented it. When the counter currently
has a value smaller then the allocated extent we reset the counter to 0
and emit a warning, otherwise we just decrement it and slowly mess up
with this counter which is crucial for space reservation, the end result
can be granting reserved space to tasks when there isn't really enough
free space, and having the tasks fail later in critical places where
error handling consists of a transaction abort or hitting a BUG_ON().
Fix this by making sure that if we fallback to the COW path for a data
relocation inode, we increment the bytes_may_use counter of the data
space_info object. The COW path will then decrement it at
btrfs_add_reserved_bytes() on success or through its error handling part
by a call to extent_clear_unlock_delalloc() (which ends up calling
btrfs_clear_delalloc_extent() that does the decrement operation) in case
of an error.
Test case btrfs/061 from fstests could sporadically trigger this.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Fleming [Thu, 18 Jun 2020 10:20:02 +0000 (11:20 +0100)]
x86/asm/64: Align start of __clear_user() loop to 16-bytes
commit
bb5570ad3b54e7930997aec76ab68256d5236d94 upstream.
x86 CPUs can suffer severe performance drops if a tight loop, such as
the ones in __clear_user(), straddles a 16-byte instruction fetch
window, or worse, a 64-byte cacheline. This issues was discovered in the
SUSE kernel with the following commit,
1153933703d9 ("x86/asm/64: Micro-optimize __clear_user() - Use immediate constants")
which increased the code object size from 10 bytes to 15 bytes and
caused the 8-byte copy loop in __clear_user() to be split across a
64-byte cacheline.
Aligning the start of the loop to 16-bytes makes this fit neatly inside
a single instruction fetch window again and restores the performance of
__clear_user() which is used heavily when reading from /dev/zero.
Here are some numbers from running libmicro's read_z* and pread_z*
microbenchmarks which read from /dev/zero:
Zen 1 (Naples)
libmicro-file
5.7.0-rc6 5.7.0-rc6 5.7.0-rc6
revert-
1153933703d9+ align16+
Time mean95-pread_z100k 9.9195 ( 0.00%) 5.9856 ( 39.66%) 5.9938 ( 39.58%)
Time mean95-pread_z10k 1.1378 ( 0.00%) 0.7450 ( 34.52%) 0.7467 ( 34.38%)
Time mean95-pread_z1k 0.2623 ( 0.00%) 0.2251 ( 14.18%) 0.2252 ( 14.15%)
Time mean95-pread_zw100k 9.9974 ( 0.00%) 6.0648 ( 39.34%) 6.0756 ( 39.23%)
Time mean95-read_z100k 9.8940 ( 0.00%) 5.9885 ( 39.47%) 5.9994 ( 39.36%)
Time mean95-read_z10k 1.1394 ( 0.00%) 0.7483 ( 34.33%) 0.7482 ( 34.33%)
Note that this doesn't affect Haswell or Broadwell microarchitectures
which seem to avoid the alignment issue by executing the loop straight
out of the Loop Stream Detector (verified using perf events).
Fixes:
1153933703d9 ("x86/asm/64: Micro-optimize __clear_user() - Use immediate constants")
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # v4.19+
Link: https://lkml.kernel.org/r/20200618102002.30034-1-matt@codeblueprint.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Tue, 9 Jun 2020 03:15:09 +0000 (20:15 -0700)]
x86/cpu: Use pinning mask for CR4 bits needing to be 0
commit
a13b9d0b97211579ea63b96c606de79b963c0f47 upstream.
The X86_CR4_FSGSBASE bit of CR4 should not change after boot[1]. Older
kernels should enforce this bit to zero, and newer kernels need to
enforce it depending on boot-time configuration (e.g. "nofsgsbase").
To support a pinned bit being either 1 or 0, use an explicit mask in
combination with the expected pinned bit values.
[1] https://lore.kernel.org/lkml/
20200527103147.GI325280@hirez.programming.kicks-ass.net
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/202006082013.71E29A42@keescook
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Christopherson [Tue, 23 Jun 2020 00:51:35 +0000 (17:51 -0700)]
KVM: VMX: Stop context switching MSR_IA32_UMWAIT_CONTROL
commit
bf09fb6cba4f7099620cc9ed32d94c27c4af992e upstream.
Remove support for context switching between the guest's and host's
desired UMWAIT_CONTROL. Propagating the guest's value to hardware isn't
required for correct functionality, e.g. KVM intercepts reads and writes
to the MSR, and the latency effects of the settings controlled by the
MSR are not architecturally visible.
As a general rule, KVM should not allow the guest to control power
management settings unless explicitly enabled by userspace, e.g. see
KVM_CAP_X86_DISABLE_EXITS. E.g. Intel's SDM explicitly states that C0.2
can improve the performance of SMT siblings. A devious guest could
disable C0.2 so as to improve the performance of their workloads at the
detriment to workloads running in the host or on other VMs.
Wholesale removal of UMWAIT_CONTROL context switching also fixes a race
condition where updates from the host may cause KVM to enter the guest
with the incorrect value. Because updates are are propagated to all
CPUs via IPI (SMP function callback), the value in hardware may be
stale with respect to the cached value and KVM could enter the guest
with the wrong value in hardware. As above, the guest can't observe the
bad value, but it's a weird and confusing wart in the implementation.
Removal also fixes the unnecessary usage of VMX's atomic load/store MSR
lists. Using the lists is only necessary for MSRs that are required for
correct functionality immediately upon VM-Enter/VM-Exit, e.g. EFER on
old hardware, or for MSRs that need to-the-uop precision, e.g. perf
related MSRs. For UMWAIT_CONTROL, the effects are only visible in the
kernel via TPAUSE/delay(), and KVM doesn't do any form of delay in
vcpu_vmx_run(). Using the atomic lists is undesirable as they are more
expensive than direct RDMSR/WRMSR.
Furthermore, even if giving the guest control of the MSR is legitimate,
e.g. in pass-through scenarios, it's not clear that the benefits would
outweigh the overhead. E.g. saving and restoring an MSR across a VMX
roundtrip costs ~250 cycles, and if the guest diverged from the host
that cost would be paid on every run of the guest. In other words, if
there is a legitimate use case then it should be enabled by a new
per-VM capability.
Note, KVM still needs to emulate MSR_IA32_UMWAIT_CONTROL so that it can
correctly expose other WAITPKG features to the guest, e.g. TPAUSE,
UMWAIT and UMONITOR.
Fixes:
6e3ba4abcea56 ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL")
Cc: stable@vger.kernel.org
Cc: Jingqi Liu <jingqi.liu@intel.com>
Cc: Tao Xu <tao3.xu@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200623005135.10414-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Christopherson [Mon, 22 Jun 2020 21:58:29 +0000 (14:58 -0700)]
KVM: nVMX: Plumb L2 GPA through to PML emulation
commit
2dbebf7ae1ed9a420d954305e2c9d5ed39ec57c3 upstream.
Explicitly pass the L2 GPA to kvm_arch_write_log_dirty(), which for all
intents and purposes is vmx_write_pml_buffer(), instead of having the
latter pull the GPA from vmcs.GUEST_PHYSICAL_ADDRESS. If the dirty bit
update is the result of KVM emulation (rare for L2), then the GPA in the
VMCS may be stale and/or hold a completely unrelated GPA.
Fixes:
c5f983f6e8455 ("nVMX: Implement emulated Page Modification Logging")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200622215832.22090-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiaoyao Li [Tue, 16 Jun 2020 07:33:07 +0000 (15:33 +0800)]
KVM: X86: Fix MSR range of APIC registers in X2APIC mode
commit
bf10bd0be53282183f374af23577b18b5fbf7801 upstream.
Only MSR address range 0x800 through 0x8ff is architecturally reserved
and dedicated for accessing APIC registers in x2APIC mode.
Fixes:
0105d1a52640 ("KVM: x2apic interface to lapic")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <
20200616073307.16440-1-xiaoyao.li@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gao Xiang [Thu, 18 Jun 2020 23:43:49 +0000 (07:43 +0800)]
erofs: fix partially uninitialized misuse in z_erofs_onlinepage_fixup
commit
3c597282887fd55181578996dca52ce697d985a5 upstream.
Hongyu reported "id != index" in z_erofs_onlinepage_fixup() with
specific aarch64 environment easily, which wasn't shown before.
After digging into that, I found that high 32 bits of page->private
was set to 0xaaaaaaaa rather than 0 (due to z_erofs_onlinepage_init
behavior with specific compiler options). Actually we only use low
32 bits to keep the page information since page->private is only 4
bytes on most 32-bit platforms. However z_erofs_onlinepage_fixup()
uses the upper 32 bits by mistake.
Let's fix it now.
Reported-and-tested-by: Hongyu Jin <hongyu.jin@unisoc.com>
Fixes:
3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20200618234349.22553-1-hsiangkao@aol.com
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason A. Donenfeld [Mon, 15 Jun 2020 10:43:32 +0000 (04:43 -0600)]
ACPI: configfs: Disallow loading ACPI tables when locked down
commit
75b0cea7bf307f362057cc778efe89af4c615354 upstream.
Like other vectors already patched, this one here allows the root
user to load ACPI tables, which enables arbitrary physical address
writes, which in turn makes it possible to disable lockdown.
Prevents this by checking the lockdown status before allowing a new
ACPI table to be installed. The link in the trailer shows a PoC of
how this might be used.
Link: https://git.zx2c4.com/american-unsigned-language/tree/american-unsigned-language-2.sh
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Fri, 12 Jun 2020 04:51:50 +0000 (21:51 -0700)]
ACPI: sysfs: Fix pm_profile_attr type
commit
e6d701dca9893990d999fd145e3e07223c002b06 upstream.
When running a kernel with Clang's Control Flow Integrity implemented,
there is a violation that happens when accessing
/sys/firmware/acpi/pm_profile:
$ cat /sys/firmware/acpi/pm_profile
0
$ dmesg
...
[ 17.352564] ------------[ cut here ]------------
[ 17.352568] CFI failure (target: acpi_show_profile+0x0/0x8):
[ 17.352572] WARNING: CPU: 3 PID: 497 at kernel/cfi.c:29 __cfi_check_fail+0x33/0x40
[ 17.352573] Modules linked in:
[ 17.352575] CPU: 3 PID: 497 Comm: cat Tainted: G W 5.7.0-microsoft-standard+ #1
[ 17.352576] RIP: 0010:__cfi_check_fail+0x33/0x40
[ 17.352577] Code: 48 c7 c7 50 b3 85 84 48 c7 c6 50 0a 4e 84 e8 a4 d8 60 00 85 c0 75 02 5b c3 48 c7 c7 dc 5e 49 84 48 89 de 31 c0 e8 7d 06 eb ff <0f> 0b 5b c3 00 00 cc cc 00 00 cc cc 00 85 f6 74 25 41 b9 ea ff ff
[ 17.352577] RSP: 0018:
ffffaa6dc3c53d30 EFLAGS:
00010246
[ 17.352578] RAX:
331267e0c06cee00 RBX:
ffffffff83d85890 RCX:
ffffffff8483a6f8
[ 17.352579] RDX:
ffff9cceabbb37c0 RSI:
0000000000000082 RDI:
ffffffff84bb9e1c
[ 17.352579] RBP:
ffffffff845b2bc8 R08:
0000000000000001 R09:
ffff9cceabbba200
[ 17.352579] R10:
000000000000019d R11:
0000000000000000 R12:
ffff9cc947766f00
[ 17.352580] R13:
ffffffff83d6bd50 R14:
ffff9ccc6fa80000 R15:
ffffffff845bd328
[ 17.352582] FS:
00007fdbc8d13580(0000) GS:
ffff9cce91ac0000(0000) knlGS:
0000000000000000
[ 17.352582] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 17.352583] CR2:
00007fdbc858e000 CR3:
00000005174d0000 CR4:
0000000000340ea0
[ 17.352584] Call Trace:
[ 17.352586] ? rev_id_show+0x8/0x8
[ 17.352587] ? __cfi_check+0x45bac/0x4b640
[ 17.352589] ? kobj_attr_show+0x73/0x80
[ 17.352590] ? sysfs_kf_seq_show+0xc1/0x140
[ 17.352592] ? ext4_seq_options_show.cfi_jt+0x8/0x8
[ 17.352593] ? seq_read+0x180/0x600
[ 17.352595] ? sysfs_create_file_ns.cfi_jt+0x10/0x10
[ 17.352596] ? tlbflush_read_file+0x8/0x8
[ 17.352597] ? __vfs_read+0x6b/0x220
[ 17.352598] ? handle_mm_fault+0xa23/0x11b0
[ 17.352599] ? vfs_read+0xa2/0x130
[ 17.352599] ? ksys_read+0x6a/0xd0
[ 17.352601] ? __do_sys_getpgrp+0x8/0x8
[ 17.352602] ? do_syscall_64+0x72/0x120
[ 17.352603] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 17.352604] ---[ end trace
7b1fa81dc897e419 ]---
When /sys/firmware/acpi/pm_profile is read, sysfs_kf_seq_show is called,
which in turn calls kobj_attr_show, which gets the ->show callback
member by calling container_of on attr (casting it to struct
kobj_attribute) then calls it.
There is a CFI violation because pm_profile_attr is of type
struct device_attribute but kobj_attr_show calls ->show expecting it
to be from struct kobj_attribute. CFI checking ensures that function
pointer types match when doing indirect calls. Fix pm_profile_attr to
be defined in terms of kobj_attribute so there is no violation or
mismatch.
Fixes:
362b646062b2 ("ACPI: Export FADT pm_profile integer value to userspace")
Link: https://github.com/ClangBuiltLinux/linux/issues/1051
Reported-by: yuu ichii <byahu140@heisei.be>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kai-Heng Feng [Wed, 17 Jun 2020 10:29:02 +0000 (18:29 +0800)]
ALSA: hda/realtek: Add mute LED and micmute LED support for HP systems
commit
b2c22910fe5aae10b7e17b0721e63a3edf0c9553 upstream.
There are two more HP systems control mute LED from HDA codec and need
to expose micmute led class so SoF can control micmute LED.
Add quirks to support them.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200617102906.16156-2-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 16 Jun 2020 13:21:50 +0000 (15:21 +0200)]
ALSA: hda/realtek - Add quirk for MSI GE63 laptop
commit
a0b03952a797591d4b6d6fa7b9b7872e27783729 upstream.
MSI GE63 laptop with ALC1220 codec requires the very same quirk
(ALC1220_FIXUP_CLEVO_P950) as other MSI devices for the proper sound
output.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208057
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200616132150.8778-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaron Plattner [Thu, 11 Jun 2020 18:08:45 +0000 (11:08 -0700)]
ALSA: hda: Add NVIDIA codec IDs 9a & 9d through a0 to patch table
commit
adb36a8203831e40494a92095dacd566b2ad4a69 upstream.
These IDs are for upcoming NVIDIA chips with audio functions that are largely
similar to the existing ones.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200611180845.39942-1-aplattner@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yash Shah [Tue, 16 Jun 2020 14:03:06 +0000 (19:33 +0530)]
RISC-V: Don't allow write+exec only page mapping request in mmap
[ Upstream commit
e0d17c842c0f824fd4df9f4688709fc6907201e1 ]
As per the table 4.4 of version "
20190608-Priv-MSU-Ratified" of the
RISC-V instruction set manual[0], the PTE permission bit combination of
"write+exec only" is reserved for future use. Hence, don't allow such
mapping request in mmap call.
An issue is been reported by David Abdurachmanov, that while running
stress-ng with "sysbadaddr" argument, RCU stalls are observed on RISC-V
specific kernel.
This issue arises when the stress-sysbadaddr request for pages with
"write+exec only" permission bits and then passes the address obtain
from this mmap call to various system call. For the riscv kernel, the
mmap call should fail for this particular combination of permission bits
since it's not valid.
[0]: http://dabbelt.com/~palmer/keep/riscv-isa-manual/riscv-privileged-
20190608-1.pdf
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
[Palmer: Refer to the latest ISA specification at the only link I could
find, and update the terminology.]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>