aml-build: fix build for glib < 2.22

g_ptr_array_new_with_free_func is there since glib 2.22,
use the older g_ptr_array_foreach instead.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: update generated files

Fixes up build on systems without iasl.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Makefile.target: binary depends on config-devices

relink binary whenever config-devices.mak changes:
this makes sense as we are adding/removing devices,
so binary has to be relinked to be up to date.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi-test-data: update after pci rewrite

more trivial changes as more code has been rewritten in C.
we also got rid of extra Scope operators.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().

Replace string "slot" in acpi_memory_plug_cb() with macro PC_DIMM_SLOT_PROP.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pci-hotplug-old: Has been dead for five major releases, bury

Commit 79ca616 (v1.6.0) accidentally disabled legacy x86-only HMP
commands pci_add, pci_del: it defined CONFIG_PCI_HOTPLUG only as make
variable, not as preprocessor macro, killing the code conditional on
defined(CONFIG_PCI_HOTPLUG_OLD).

In all this time, nobody reported the loss.  I only noticed it when I
tried to test some error reporting change that forced me to touch this
old crap again.

Fun: git-log hw/pci/pci-hotplug-old.c shows our faith in the backward
compatibility god has been strong enough to sacrifice at its altar
about a dozen times, but not strong enough to even once verify the
legacy feature's still there, let alone works.

Remove the commands along with the code backing them.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pci: Give a few helpers internal linkage

None of them should be used in new code.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: make build_*() routines static to aml-build.c

build_*() routines were used for composing AML
structures manually in acpi-build.c but after
conversion to AML API they are not used outside
of aml-build.c anymore, so hide them from external
users.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi-build: drop template patching and create PCI bus tree dynamically

Replace AML template patching with direct composing
of PCI device entries in C. It allows to simplify
PCI tree generation further and saves us about 400LOC
scattered through different files, confining tree
generation to one C function which is much easier
to deal with.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi-build: simplify PCI bus tree generation

it basicaly does the same as original approach,
* just without bus/notify tables tracking (less obscure)
  which is easier to follow.
* drops unnecessary loops and bitmaps,
  creating devices and notification method in the same loop.
* saves us ~100LOC

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tests: add ACPI blobs for qemu with bridge cases

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tests: bios-tables-test: add support for testing bridges

Adds alternative ACPI table blob selection for testing
non default QEMU configurations. If blob file for test
variant is not present, fallback to default blob.

With this change implement testing with a coldplugged
bridge.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tests: ACPI test blobs update due to PCI0._CRS changes

PCI0._CRS was moved into SSDT and became the same for
PIIX4/Q35 machines.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi-build: drop template patching and create Device(SMC) dynamically

patch moves SMC device into SSDT and creates it only
when device is present, which makes ACPI tables smaller
in default case when device is not present.

Also it fixes wrong IO range in CRS if "iobase"
property is set to a non default value.

PS:
Testing with XP shows that current default "iobase"
used SMC device conflicts with floppy controller IO,
but it's topic for another patch and I'd leave it
to SMC device author for resolving conflict.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
CC: agraf@suse.de
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: export applesmc IO port/len

IO port and length will be used in following patch
to correctly generate SMC ACPI device in SSDT.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add acpi_irq_no_flags() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi-build: drop remaining ssdt_misc template

It drops empty ssdt_misc templete. It also hides
from user almost all pointer arithmetic when building
SSDT which makes resulting code a bit cleaner
and concentrating only on composing ASL construct
/i.e. a task build_ssdt() should be doing/.

Also it makes one binary blob less stored in QEMU
source tree by removing need to keep and update
hw/i386/ssdt-misc.hex.generated file here in total
saving us ~430LOC.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi: drop manual hole punching for GPE0 resources

Drops manual hole punching in PCI0._CRS on PIIX4 machine type
for GPE0 resources. Resources will be consumed by Device(GPE0)
that is attached to PCI namespace.
There is GPE device with HID ACPI0006 since ACPI2.0
that should be used for this purpose but none of Windows
versions support it and show it as "unknown device",
so reserve resource in old fashioned way with PNP0A06
device to make windows happy and actually reserve resources.

Along with last hole _CRS layout of PIIX4 machine becomes
the same as Q35 one, so merge them together and use the same
_CRS for both machine types.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi: drop manual hole punching for CPU hotplug resources

Drops manual hole punching in PCI0._CRS on PIIX4 machine type
for CPU hotplug resources.
Resources will be consumed by Device(PRES) that is attached
to PCI bus. The same way how it currently works for mem hotlpug.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi: drop manual hole punching for PCI hotplug resources

Drops manual hole punching in PCI0._CRS for PIIX4 machine type.
Resources will be consumed by Device(PHPR) that cwis attached
to PCI bus. The same way how it currently works for mem hotlpug.

Manual hole in PIIX4 _CRS wasn't correct anyway since it was
legacy size 0xF while current PCIHP MMIO region is of size 0x14.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi-build: create PCI0._CRS dynamically

Replace template patching and runtime calculation
in _CRS() method with static _CRS defined in SSDT.
No functional change except of as mentined above
and _CRS being moved from DSDT to SSDT.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tpm: Support for capability flags of TIS 1.3

Provide the TIS 1.3 capability flags.
The interface now looks like a TIS 1.3 interface. It's fully
compatible with previous TIS 1.2 and drivers written for
TIS 1.2 continue to work.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tpm: Support for TIS selftest done flag

Extend the backend to check whether the TPM_ContinueSelfTest
finished successfully and provide a flag to the TIS front-end
if it successfully finished. The TIS then sets a flag in
all localities in the STS register and keeps it until the next
reset.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tpm: Support for XFIFO register

Support for the XFIFO register (range) of the TIS 1.3 specification.
We support a range of 64 bytes.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tpm: Allow 32 & 16 bit accesses to the registers

Improve the access to the registers with 32 and 16 bit reads and writes.
Also enable access to a non-base register address, such as reads of the
2nd byte of a register. Map the FIFO byte access to any byte within
its 4 byte register (following specs).

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tpm: Extend sts register to 32 bit

More recent TIS specs extend the STS register to 32 bit. While
we don't store the TIS interface state, yet, we can extend it
without sideeffects.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

balloon: call qdev_alias_all_properties for proxy dev in balloon class init

The idea is that all other virtio devices are calling this helper
to merge properties of the proxy device. This is the only difference
in between this helper and code in inside virtio_instance_init_common.
The patch should not cause any harm as property list in generic balloon
code is empty.

This also allows to avoid some dummy errors like fixed by this
    commit 91ba21208839643603e7f7fa5864723c3f371ebe
    Author: Gonglei <arei.gonglei@huawei.com>
    Date:   Tue Sep 30 14:10:35 2014 +0800
    virtio-balloon: fix virtio-balloon child refcount in transports

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Raushaniya Maksudova <rmaksudova@parallels.com>
Revieved-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi-test: update expected files

A bunch of code moved from dsdt to ssdt,
plus we got trivial changes like 0->Zero which our test
dosn't recognize as identity yet.
Update expected files to suppress test warning.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: drop unused generated files

drop ssdt-mem.hex.generated and ssdt-proc.hex.generated:
dsl files have been removed previously.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: update generated hex files

Used for IASL builds.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi-build: reserve PCIHP MMIO resources

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: pcihp: expose MMIO base and len as properties

it will be used later to dynamically reserve MMIO region
instead of manually punching holes in PCI0._CRS

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_word_bus_number(), aml_word_io(), aml_dword_memory(), aml_qword_memory() terms

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi-build: create memory hotplug IO region dynamically

it replaces a static complied in DSDT MMIO region
for memory hotplug with one created at runtime
leaving only truly static memory hotplug related
ASL bits in DSDT. And replaces template patching
of MEMORY_SLOTS_NUMBER value with ASL API created
named value.

Later it also would make easier to reuse current
ACPI memory hotplug on other targets.

Also later it would be possible to move remaining
memory hotplug ASL methods into build_ssdt() and
add all memory hotplug related AML into SSDT only
when memory hotplug is enabled, further reducing
ACPI tables blob if memory hotplug isn't used.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi-build: drop template patching and memory hotplug objects dynamically

in addition it saves us ~330LOC and makes it one binary blob less
stored in QEMU source tree by removing need to keep and update
hw/i386/ssdt-mem.hex.generated file there.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_reserved_field() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi-build: create CPU hotplug IO region dynamically

it replaces a static complied in DSDT MMIO region
for CPU hotplug with one created at runtime
leaving only truly static CPU hotplug related ASL
bits in DSDT.
It also puts CPU_HOTPLUG_RESOURCE_DEVICE into
PCI0 scope and reserves resources from it,
preparing for dropping manual hole punching
in PCI0._CRS.

Later it also would make easier to reuse current
ACPI CPU hotplug on other targets.

Also later it would be possible to move remaining
CPU hotplug ASL methods into build_ssdt() and
add all CPU hotplug related AML into SSDT only
when CPU hotplug is enabled, further reducing
ACPI tables blob if CPU hotplug isn't used.

impl. detail:
Windows XP can't handle /BSODs/ OperationRegion
declaration in DSDT when variable from SSDT is used
for specifying its address/length and also when
Field declared in DSDT with OperationRegion from
SSDT if DSDT is being parsed before SSDT.
But it works just fine when referencing named
fields from another table. Hence OperationRegion
and Field declaration are moved to SSDT to make
XP based editions work.

PS:
Later Windows editions seem to be fine with above
conditions.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi-build: drop template patching and CPU hotplug objects dynamically

in addition it saves us ~400LOC and makes it
one binary blob less stored in QEMU source
tree by removing need to keep and update
hw/i386/ssdt-proc.hex.generated file there.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_eisaid() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_processor() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_equal() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_varpackage() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi-build: generate pvpanic device description dynamically

Drops AML template patching and allows to
save some space in SSDT if pvpanic device doesn't
exist by not including disabled device description
into SSDT. It also makes device description
smaller by replacing _STA method with named value
and dropping _INI method.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_string() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_local() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_field() & aml_named_field() terms

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_operation_region() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: include PkgLength size only when requested

Named/Reserved{Field} definition uses PkgLength [1] encoding to specify
field length, however it doesn't include size of PkgLength field itself,
while other block objects that have explicit length of its body account
for PkgLength size while encoding it [2].
This special casing isn't mentioned in ACPI spec, but that's what 'iasl'
compiles NamedField to so add extra argument to build_prepend_pkg_length()
to allow it handle the case.

--
1. ACPI Spec 5.0, 20.2.5.2 Named Objects Encoding, page 822
2. ACPI Spec 5.0, 5.4 Definition Block Encoding

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_io() helper

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_resource_template() helper

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_buffer() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi-build: generate _S[345] packages dynamically

Replaces template patching with packages composed
using AML API.

Note on behavior change:
If S3 or S4 is disabled, respective packages won't
be created and put into SSDT. Which saves us some
space in SSDT and doesn't confuse guest OS with
mangled package names as it was done originally.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_package() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_call1(), aml_call2(), aml_call3(), aml_call4() helpers

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_notify() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_and() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_store() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_arg() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_return() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_int() term

* factor out ACPI const int packing out of build_append_value()
  and rename build_append_value() to build_append_int_noprefix()
  it will be reused for adding a plain integer value into AML.
  will be used by is aml_processor() and CRS macro helpers
* extend build_append_int{_noprefix}() to support 64-bit values
  it will be used PCI for generating 64bit _CRS entries

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_name() & aml_name_decl() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_if() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_method() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_device() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi-build: use aml_scope() for \_SB scope

prepares for incremental conversion of SSDT content to AML API

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: add aml_scope() term

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: introduce AML composer aml_append()

Adds for dynamic AML creation, which will be used
for piecing ASL/AML primitives together and hiding
from user/caller details about how nested context
should be closed/packed leaving less space for
mistakes and necessity to know how AML should be
encoded, allowing user to concentrate on ASL
representation instead.

For example it will allow to create AML like this:

init_aml_allocator();
...
Aml *scope = aml_scope("PCI0")
Aml *dev = aml_device("PM")
    aml_append(dev, aml_name_decl("_ADR", aml_int(addr)))
aml_append(scope, dev);
...
free_aml_allocator();

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio_ring.h: s/__inline__/inline/

Thomas Huth noticed that some linux headers
use __inline__, change to inline to be consistent
with the rest of QEMU.

Reported-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

standard-headers: include stdint.h

The importing script got it right already, I just forgot to re-run it.

Reported-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-serial-bus.c: drop virtio_ids.h

virtio-serial.h pulls that in already.

Reported-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

update-linux-headers.sh: s/__inline__/inline/

Thomas Huth noticed that some linux headers
use __inline__, change to inline to be consistent
with the rest of QEMU.

Reported-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pc: acpi: use local var for accessing ACPI tables blob in acpi_build()

except of shortening of lines and making code a bit more readable,
it will reduce renaming noise when changing tables blob from GArray* to
Aml* type.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi-build: skip hotplugged bridges

hotplugged bridges don't get bsel allocated so acpi hotplug doesn't work
for them anyway.  OTOH adding them in ACPI creates a host of problems,
e.g. they can't be hot-unplugged themselves which is surprising to
users.

So let's just skip these.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio: add feature checking helpers

Add a helper function for checking whether a bit is set in the guest
features for a vdev as well as one that works on a feature bit set.

Convert code that open-coded this: It cleans up the code and makes it
easier to extend the guest feature bits.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio: feature bit manipulation helpers

Add virtio_{add,clear}_feature helper functions for manipulating a
feature bits variable. This has some benefits over open coding:
- add check that the bit is in a sane range
- make it obvious at a glance what is going on
- have a central point to change when we want to extend feature bits

Convert existing code manipulating features to use the new helpers.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio: cull virtio_bus_set_vdev_features

The only user of this function was virtio-ccw, and it should use
virtio_set_features() like everybody else: We need to make sure
that bad features are masked out properly, which this function did
not do.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

s390: use standard headers

Drop duplicated macros in favor of values from
standard headers.

Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

standard-headers: add s390 virtio headers

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

scripts: add arch specific standard-headers

Copy arch specific virtio headers.
ATM this applies to s390 only.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-pci: use standard headers

Drop duplicate code.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

linux-headers: use standard-headers

Drop duplicated code.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

update-linux-headers: use standard-headers

Drop the linux-specific virtio headers, use the copy from
standard-headers instead.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-serial: switch to standard-headers

Drop duplicate code.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-scsi: use standard-headers

Drop duplicated code.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>

virtio-rng: use standard-headers

Drop duplicated code.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>

virtio-net,tap: use standard-headers

Drop duplicated code.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>

virtio-blk: switch to standard-headers

Drop duplicated code. Minor codechanges were required
as geometry is a sub-structure now.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>

virtio-9p: use standard headers

Drop code duplicated from standard headers.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>

virtio-balloon: use standard headers

Drop code duplicated from standard headers.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>

virtio: use standard-headers

Drop a bunch of code duplicated from virtio_config.h and virtio_ring.h.
This makes us rename event index accessors which conflict,
as reusing the ones from virtio_ring.h isn't trivial.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>

virtio: use standard virtio_ring.h

Switch to virtio_ring.h from standard headers.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

include: import virtio headers from linux 4.0

Add files imported from linux-next (what will become linux 4.0) using
scripts/update-linux-headers.sh

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

scripts/update-linux-headers.sh: pull virtio hdrs

It doesn't make sense to copy values manually:
the only issue with getting headers from linux
seems to be dealing with linux/types, we
can easily fix that automatically while importing.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>

acpi-build: simplify rsdp management for legacy

For legacy machine types, rsdp is not in RAM, so we need a copy of rsdp
for fw cfg. We previously used g_array_free with false parameter,
but this seems to confuse people.
This also wastes a bit of memory as the buffer is unused for new
machine types.

Let's just use plain g_memdup, and free original memory together with
the array.

TODO: rationalize tcpalog memory management, and get rid of the mfre
parameter.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

acpi: has_immutable_rsdp->!rsdp_in_ram

As comment in acpi-build.c notes, RSDP is not really immutable.  So it's
really a question of whether it's in RAM, name the variable accordingly.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

acpi-build: fix ACPI RAM management

This fixes multiple issues around ACPI RAM management:

RSDP and linker RAM aren't currently marked dirty
on update, so they won't be migrated correctly.

Let's handle all tables in the same way: set correct size (assert if
too big), update, mark RAM dirty.

This also drops assert checking that table size didn't change: table
size is fundamentally dynamic and depends on hw configuration,
just set the correct size and use that (memory core asserts if size is
too large).

This also means we can drop tracking table size, memory core does this
for us now.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

exec: round up size on MR resize

Block size must fundamentally be a multiple of target page size.
Aligning automatically removes need to worry about the alignment
from callers.

Note: the only caller of qemu_ram_resize (acpi) already happens to have
size padded to a power of 2, but we would like to drop the padding in
ACPI core, and don't want to expose target page size knowledge to ACPI.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <ponzini@redhat.com>

pc: acpi-build: migrate RSDP table

Makes sure that RSDP stays the same
/i.e. matches ACPI tables blob in source/
if guest is migrated during RSDP reading or
has been already shadowed by firmware.

Fix applies only to new machine types starting
from 2.3, so it won't break migration for old
machine types.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>