ARM: dts: bcm2711-rpi-400: Fix delete-node of led_act

[ Upstream commit dc761f11af2e39119d3a7942e3d10615f3d900e7 ]

The LED ACT which is included from bcm2711-rpi-4-b doesn't exists
on the Raspberry Pi 400. So the bcm2711-rpi-400.dts tries to
use the delete-node directive in order to remove the complete
node. Unfortunately the usage get broken in commit 1156e3a78bcc
("ARM: dts: bcm283x: Move ACT LED into separate dtsi")
and now ACT and PWR LED using the same GPIO and this prevent
probing of led-gpios on Raspberry Pi 400:

    leds-gpio: probe of leds failed with error -16

So fix the delete-node directive.

Fixes: 1156e3a78bcc ("ARM: dts: bcm283x: Move ACT LED into separate dtsi")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231118124252.14838-3-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: Fix sdmmc_pwren's pinmux setting for RK3128

[ Upstream commit 0c349b5001f8bdcead844484c15a0c4dfb341157 ]

RK3128's reference design uses sdmmc_pwren pincontrol as GPIO - see [0].

Let's change it in the SoC DT as well.

[0] https://github.com/rockchip-linux/kernel/commit/8c62deaf6025

Fixes: a0201bff6259 ("ARM: dts: rockchip: add rk3128 soc dtsi")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20231127184643.13314-2-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6q: skov: fix ethernet clock regression

[ Upstream commit 6552218f4dc47ba3c6c5b58cc1e9eb208a2b438b ]

A regression was introduced in the Skov specific i.MX6 flavor
reve-mi1010ait-1cp1 device tree causing the external ethernet controller
to not being selected as the clock source for the i.MX6 ethernet MAC,
resulting in a none functional ethernet interface. The root cause is
that the ethernet clock selection is now part of the clocks node, which
is overwritten in the specific device tree and wasn't updated to contain
these ethernet clocks.

Fixes: c89614079e44 ("ARM: dts: imx6qdl-skov-cpu: configure ethernet reference clock parent")
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dt: imx93: tqma9352-mba93xxla: Fix LPUART2 pad config

[ Upstream commit 2bfba37b3d90d6d2d499d5b0dfe99c05c38b1b54 ]

LPUART2_RTS# has an external pull-down, so do not enable the internal
pull-up at the same time, use a pull-down instead.

Fixes: c982ecfa7992a ("arm64: dts: freescale: add initial device tree for MBa93xxLA SBC board")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Fix UAF in irdma_sc_ccq_get_cqe_info()

[ Upstream commit 2b78832f50c4d711e161b166d7d8790968051546 ]

When removing the irdma driver or unplugging its aux device, the ccq
queue is released before destorying the cqp_cmpl_wq queue.
But in the window, there may still be completion events for wqes. That
will cause a UAF in irdma_sc_ccq_get_cqe_info().

[34693.333191] BUG: KASAN: use-after-free in irdma_sc_ccq_get_cqe_info+0x82f/0x8c0 [irdma]
[34693.333194] Read of size 8 at addr ffff889097f80818 by task kworker/u67:1/26327
[34693.333194]
[34693.333199] CPU: 9 PID: 26327 Comm: kworker/u67:1 Kdump: loaded Tainted: G           O     --------- -t - 4.18.0 #1
[34693.333200] Hardware name: SANGFOR Inspur/NULL, BIOS 4.1.13 08/01/2016
[34693.333211] Workqueue: cqp_cmpl_wq cqp_compl_worker [irdma]
[34693.333213] Call Trace:
[34693.333220]  dump_stack+0x71/0xab
[34693.333226]  print_address_description+0x6b/0x290
[34693.333238]  ? irdma_sc_ccq_get_cqe_info+0x82f/0x8c0 [irdma]
[34693.333240]  kasan_report+0x14a/0x2b0
[34693.333251]  irdma_sc_ccq_get_cqe_info+0x82f/0x8c0 [irdma]
[34693.333264]  ? irdma_free_cqp_request+0x151/0x1e0 [irdma]
[34693.333274]  irdma_cqp_ce_handler+0x1fb/0x3b0 [irdma]
[34693.333285]  ? irdma_ctrl_init_hw+0x2c20/0x2c20 [irdma]
[34693.333290]  ? __schedule+0x836/0x1570
[34693.333293]  ? strscpy+0x83/0x180
[34693.333296]  process_one_work+0x56a/0x11f0
[34693.333298]  worker_thread+0x8f/0xf40
[34693.333301]  ? __kthread_parkme+0x78/0xf0
[34693.333303]  ? rescuer_thread+0xc50/0xc50
[34693.333305]  kthread+0x2a0/0x390
[34693.333308]  ? kthread_destroy_worker+0x90/0x90
[34693.333310]  ret_from_fork+0x1f/0x40

Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Shifeng Li <lishifeng1992@126.com>
Link: https://lore.kernel.org/r/20231121101236.581694-1-lishifeng1992@126.com
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/bnxt_re: Correct module description string

[ Upstream commit 422b19f7f006e813ee0865aadce6a62b3c263c42 ]

The word "Driver" is repeated twice in the "modinfo bnxt_re"
output description. Fix it.

Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1700555387-6277-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-clt: Remove the warnings for req in_use check

[ Upstream commit 0c8bb6eb70ca41031f663b4481aac9ac78b53bc6 ]

As we chain the WR during write request: memory registration,
rdma write, local invalidate, if only the last WR fail to send due
to send queue overrun, the server can send back the reply, while
client mark the req->in_use to false in case of error in rtrs_clt_req
when error out from rtrs_post_rdma_write_sg.

Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-8-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-clt: Fix the max_send_wr setting

[ Upstream commit 6d09f6f7d7584e099633282ea915988914f86529 ]

For each write request, we need Request, Response Memory Registration,
Local Invalidate.

Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-7-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-srv: Destroy path files after making sure no IOs in-flight

[ Upstream commit c4d32e77fc1006f99eeb78417efc3d81a384072a ]

Destroying path files may lead to the freeing of rdma_stats. This creates
the following race.

An IO is in-flight, or has just passed the session state check in
process_read/process_write. The close_work gets triggered and the function
rtrs_srv_close_work() starts and does destroy path which frees the
rdma_stats. After this the function process_read/process_write resumes and
tries to update the stats through the function rtrs_srv_update_rdma_stats

This commit solves the problem by moving the destroy path function to a
later point. This point makes sure any inflights are completed. This is
done by qp drain, and waiting for all in-flights through ops_id.

Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Santosh Kumar Pradhan <santosh.pradhan@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-6-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-srv: Free srv_mr iu only when always_invalidate is true

[ Upstream commit 3a71cd6ca0ce33d1af019ecf1d7167406fa54400 ]

Since srv_mr->iu is allocated and used only when always_invalidate is
true, free it only when always_invalidate is true.

Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-5-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-srv: Check return values while processing info request

[ Upstream commit ed1e52aefa16f15dc2f04054a3baf11726a7460e ]

While processing info request, it could so happen that the srv_path goes
to CLOSING state, cause of any of the error events from RDMA. That state
change should be picked up while trying to change the state in
process_info_req, by checking the return value. In case the state change
call in process_info_req fails, we fail the processing.

We should also check the return value for rtrs_srv_path_up, since it
sends a link event to the client above, and the client can fail for any
reason.

Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-4-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-clt: Start hb after path_up

[ Upstream commit 3e44a61b5db873612e20e7b7922468d7d1ac2d22 ]

If we start hb too early, it will confuse server side to close
the session.

Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-3-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-srv: Do not unconditionally enable irq

[ Upstream commit 3ee7ecd712048ade6482bea4b2f3dcaf039c0348 ]

When IO is completed, rtrs can be called in softirq context,
unconditionally enabling irq could cause panic.

To be on safe side, use spin_lock_irqsave and spin_unlock_irqrestore
instread.

Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Florian-Ewald Mueller <florian-ewald.mueller@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-2-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_sai: Fix no frame sync clock issue on i.MX8MP

[ Upstream commit 14e8442e0789598514f3c9de014950de9feda7a4 ]

On i.MX8MP, when the TERE and FSD_MSTR enabled before configuring
the word width, there will be no frame sync clock issue, because
old word width impact the generation of frame sync.

TERE enabled earlier only for i.MX8MP case for the hardware limitation,
So need to disable FSD_MSTR before configuring word width, then enable
FSD_MSTR bit for this specific case.

Fixes: 3e4a82612998 ("ASoC: fsl_sai: MCLK bind with TX/RX enable bit")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1700474735-3863-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: Expand reg size of vdec node for RK3399

[ Upstream commit 35938c18291b5da7422b2fac6dac0af11aa8d0d7 ]

Expand the reg size for the vdec node to include cache/performance
registers the rkvdec driver writes to. Also add missing clocks to the
related power-domain.

Fixes: cbd7214402ec ("arm64: dts: rockchip: Define the rockchip Video Decoder node on rk3399")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20231105233630.3927502-10-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: Expand reg size of vdec node for RK3328

[ Upstream commit 0b6240d697a96eaa45a2a5503a274ebb4f162fa3 ]

Expand the reg size for the vdec node to include cache/performance
registers the rkvdec driver writes to.

Fixes: 17408c9b119d ("arm64: dts: rockchip: Add vdec support for RK3328")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20231105233630.3927502-9-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Add wait for suspend on SQD

[ Upstream commit bd6da690c27d75cae432c09162d054b34fa2156f ]

Currently, there is no wait for the QP suspend to complete on a modify
to SQD state. Add a wait, after the modify to SQD state, for the Suspend
Complete AE. While we are at it, update the suspend timeout value in
irdma_prep_tc_change to use IRDMA_EVENT_TIMEOUT_MS too.

Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20231114170246.238-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Do not modify to SQD on error

[ Upstream commit ba12ab66aa83a2340a51ad6e74b284269745138c ]

Remove the modify to SQD before going to ERROR state. It is not needed.

Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20231114170246.238-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix unnecessary err return when using invalid congest control algorithm

[ Upstream commit efb9cbf66440482ceaa90493d648226ab7ec2ebf ]

Add a default congest control algorithm so that driver won't return
an error when the configured algorithm is invalid.

Fixes: f91696f2f053 ("RDMA/hns: Support congestion control type selection according to the FW")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231028093242.670325-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Fix uninit-value access in ib_get_eth_speed()

[ Upstream commit 0550d4604e2ca4e653dc13f0c009fc42106b6bfc ]

KMSAN reported the following uninit-value access issue:

lo speed is unknown, defaulting to 1000
=====================================================
BUG: KMSAN: uninit-value in ib_get_width_and_speed drivers/infiniband/core/verbs.c:1889 [inline]
BUG: KMSAN: uninit-value in ib_get_eth_speed+0x546/0xaf0 drivers/infiniband/core/verbs.c:1998
 ib_get_width_and_speed drivers/infiniband/core/verbs.c:1889 [inline]
 ib_get_eth_speed+0x546/0xaf0 drivers/infiniband/core/verbs.c:1998
 siw_query_port drivers/infiniband/sw/siw/siw_verbs.c:173 [inline]
 siw_get_port_immutable+0x6f/0x120 drivers/infiniband/sw/siw/siw_verbs.c:203
 setup_port_data drivers/infiniband/core/device.c:848 [inline]
 setup_device drivers/infiniband/core/device.c:1244 [inline]
 ib_register_device+0x1589/0x1df0 drivers/infiniband/core/device.c:1383
 siw_device_register drivers/infiniband/sw/siw/siw_main.c:72 [inline]
 siw_newlink+0x129e/0x13d0 drivers/infiniband/sw/siw/siw_main.c:490
 nldev_newlink+0x8fd/0xa60 drivers/infiniband/core/nldev.c:1763
 rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
 rdma_nl_rcv+0xe8a/0x1120 drivers/infiniband/core/netlink.c:259
 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
 netlink_unicast+0xf4b/0x1230 net/netlink/af_netlink.c:1368
 netlink_sendmsg+0x1242/0x1420 net/netlink/af_netlink.c:1910
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 ____sys_sendmsg+0x997/0xd60 net/socket.c:2588
 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2642
 __sys_sendmsg net/socket.c:2671 [inline]
 __do_sys_sendmsg net/socket.c:2680 [inline]
 __se_sys_sendmsg net/socket.c:2678 [inline]
 __x64_sys_sendmsg+0x2fa/0x4a0 net/socket.c:2678
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Local variable lksettings created at:
 ib_get_eth_speed+0x4b/0xaf0 drivers/infiniband/core/verbs.c:1974
 siw_query_port drivers/infiniband/sw/siw/siw_verbs.c:173 [inline]
 siw_get_port_immutable+0x6f/0x120 drivers/infiniband/sw/siw/siw_verbs.c:203

CPU: 0 PID: 11257 Comm: syz-executor.1 Not tainted 6.6.0-14500-g1c41041124bd #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
=====================================================

If __ethtool_get_link_ksettings() fails, `netdev_speed` is set to the
default value, SPEED_1000. In this case, if `lanes` field of struct
ethtool_link_ksettings is not initialized, an uninitialized value is passed
to ib_get_width_and_speed(). This causes the above issue. This patch
resolves the issue by initializing `lanes` to 0.

Fixes: cb06b6b3f6cb ("RDMA/core: Get IB width and speed from netdev")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20231108143113.1360567-1-syoshida@redhat.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tee: optee: Fix supplicant based device enumeration

[ Upstream commit 7269cba53d906cf257c139d3b3a53ad272176bca ]

Currently supplicant dependent optee device enumeration only registers
devices whenever tee-supplicant is invoked for the first time. But it
forgets to remove devices when tee-supplicant daemon stops running and
closes its context gracefully. This leads to following error for fTPM
driver during reboot/shutdown:

[   73.466791] tpm tpm0: ftpm_tee_tpm_op_send: SUBMIT_COMMAND invoke error: 0xffff3024

Fix this by adding an attribute for supplicant dependent devices so that
the user-space service can detect and detach supplicant devices before
closing the supplicant:

$ for dev in /sys/bus/tee/devices/*; do if [[ -f "$dev/need_supplicant" && -f "$dev/driver/unbind" ]]; \
      then echo $(basename "$dev") > $dev/driver/unbind; fi done

Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Closes: https://github.com/OP-TEE/optee_os/issues/6094
Fixes: 5f178bb71e3a ("optee: enable support for multi-stage bus enumeration")
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
[jw: fixed up Date documentation]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/damon/sysfs: eliminate potential uninitialized variable warning

[ Upstream commit 85c2ceaafbd306814a3a4740bf4d95ac26a8b36a ]

The "err" variable is not initialized if damon_target_has_pid(ctx) is
false and sys_target->regions->nr is zero.

Link: https://lkml.kernel.org/r/739e6aaf-a634-4e33-98a8-16546379ec9f@moroto.mountain
Fixes: 0bcd216c4741 ("mm/damon/sysfs: update monitoring target regions for online input commit")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: get doorbell's absolute offset based on the db_size

[ Upstream commit 367a0af43373d4f791cc8b466a659ecf5aa52377 ]

Here, Adding db_size in byte to find the doorbell's
absolute offset for both 32-bit and 64-bit doorbell sizes.
So that doorbell offset will be aligned based on the doorbell
size.

v2:
- Addressed the review comment from Felix.
v3:
- Adding doorbell_size as parameter to get db absolute offset.
v4:
  Squash the two patches into one.

Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/amdgpu/amdgpu_doorbell_mgr: Correct misdocumented param 'doorbell_index'

[ Upstream commit 04cef5f58395806294a64118cf8a39534bd032a2 ]

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/amdgpu_doorbell_mgr.c:123: warning: Function parameter or member 'doorbell_index' not described in 'amdgpu_doorbell_index_on_bar'
 drivers/gpu/drm/amd/amdgpu/amdgpu_doorbell_mgr.c:123: warning: Excess function parameter 'db_index' description in 'amdgpu_doorbell_index_on_bar'

Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: fix missing byte order conversion in CLC handshake

[ Upstream commit c5a10397d4571bcfd4bd7ca211ee47bcb6792ec3 ]

The byte order conversions of ISM GID and DMB token are missing in
process of CLC accept and confirm. So fix it.

Fixes: 3d9725a6a133 ("net/smc: common routine for CLC accept and confirm")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/1701882157-87956-1-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: microchip: provide a list of valid protocols for xmit handler

[ Upstream commit 1499b89289bf272fd83cb296c82fb5519d0fe93f ]

Provide a list of valid protocols for which the driver will provide
it's deferred xmit handler.

When using DSA_TAG_PROTO_KSZ8795 protocol, it does not provide a
"connect" method, therefor ksz_connect() is not allocating ksz_tagger_data.

This avoids the following null pointer dereference:
 ksz_connect_tag_protocol from dsa_register_switch+0x9ac/0xee0
 dsa_register_switch from ksz_switch_register+0x65c/0x828
 ksz_switch_register from ksz_spi_probe+0x11c/0x168
 ksz_spi_probe from spi_probe+0x84/0xa8
 spi_probe from really_probe+0xc8/0x2d8

Fixes: ab32f56a4100 ("net: dsa: microchip: ptp: add packet transmission timestamping")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231206071655.1626479-1-sean@geanix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group

[ Upstream commit e03781879a0d524ce3126678d50a80484a513c4b ]

The "NET_DM" generic netlink family notifies drop locations over the
"events" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.

Fix by adding a new field to the generic netlink multicast group
structure that when set prevents non-root users or root without the
'CAP_SYS_ADMIN' capability (in the user namespace owning the network
namespace) from joining the group. Set this field for the "events"
group. Use 'CAP_SYS_ADMIN' rather than 'CAP_NET_ADMIN' because of the
nature of the information that is shared over this group.

Note that the capability check in this case will always be performed
against the initial user namespace since the family is not netns aware
and only operates in the initial network namespace.

A new field is added to the structure rather than using the "flags"
field because the existing field uses uAPI flags and it is inappropriate
to add a new uAPI flag for an internal kernel check. In net-next we can
rework the "flags" field to use internal flags and fold the new field
into it. But for now, in order to reduce the amount of changes, add a
new field.

Since the information can only be consumed by root, mark the control
plane operations that start and stop the tracing as root-only using the
'GENL_ADMIN_PERM' flag.

Tested using [1].

Before:

 # capsh -- -c ./dm_repo
 # capsh --drop=cap_sys_admin -- -c ./dm_repo

After:

 # capsh -- -c ./dm_repo
 # capsh --drop=cap_sys_admin -- -c ./dm_repo
 Failed to join "events" multicast group

[1]
 $ cat dm.c
 #include <stdio.h>
 #include <netlink/genl/ctrl.h>
 #include <netlink/genl/genl.h>
 #include <netlink/socket.h>

 int main(int argc, char **argv)
 {
  struct nl_sock *sk;
  int grp, err;

  sk = nl_socket_alloc();
  if (!sk) {
  fprintf(stderr, "Failed to allocate socket\n");
  return -1;
  }

  err = genl_connect(sk);
  if (err) {
  fprintf(stderr, "Failed to connect socket\n");
  return err;
  }

  grp = genl_ctrl_resolve_grp(sk, "NET_DM", "events");
  if (grp < 0) {
  fprintf(stderr,
  "Failed to resolve \"events\" multicast group\n");
  return grp;
  }

  err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
  if (err) {
  fprintf(stderr, "Failed to join \"events\" multicast group\n");
  return err;
  }

  return 0;
 }
 $ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o dm_repo dm.c

Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

psample: Require 'CAP_NET_ADMIN' when joining "packets" group

[ Upstream commit 44ec98ea5ea9cfecd31a5c4cc124703cb5442832 ]

The "psample" generic netlink family notifies sampled packets over the
"packets" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.

Fix by marking the group with the 'GENL_UNS_ADMIN_PERM' flag. This will
prevent non-root users or root without the 'CAP_NET_ADMIN' capability
(in the user namespace owning the network namespace) from joining the
group.

Tested using [1].

Before:

 # capsh -- -c ./psample_repo
 # capsh --drop=cap_net_admin -- -c ./psample_repo

After:

 # capsh -- -c ./psample_repo
 # capsh --drop=cap_net_admin -- -c ./psample_repo
 Failed to join "packets" multicast group

[1]
 $ cat psample.c
 #include <stdio.h>
 #include <netlink/genl/ctrl.h>
 #include <netlink/genl/genl.h>
 #include <netlink/socket.h>

 int join_grp(struct nl_sock *sk, const char *grp_name)
 {
  int grp, err;

  grp = genl_ctrl_resolve_grp(sk, "psample", grp_name);
  if (grp < 0) {
  fprintf(stderr, "Failed to resolve \"%s\" multicast group\n",
  grp_name);
  return grp;
  }

  err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
  if (err) {
  fprintf(stderr, "Failed to join \"%s\" multicast group\n",
  grp_name);
  return err;
  }

  return 0;
 }

 int main(int argc, char **argv)
 {
  struct nl_sock *sk;
  int err;

  sk = nl_socket_alloc();
  if (!sk) {
  fprintf(stderr, "Failed to allocate socket\n");
  return -1;
  }

  err = genl_connect(sk);
  if (err) {
  fprintf(stderr, "Failed to connect socket\n");
  return err;
  }

  err = join_grp(sk, "config");
  if (err)
  return err;

  err = join_grp(sk, "packets");
  if (err)
  return err;

  return 0;
 }
 $ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o psample_repo psample.c

Fixes: 6ae0a6286171 ("net: Introduce psample, a new genetlink channel for packet sampling")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: sockmap, updating the sg structure should also update curr

[ Upstream commit bb9aefde5bbaf6c168c77ba635c155b4980c2287 ]

Curr pointer should be updated when the sg structure is shifted.

Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231206232706.374377-3-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: tls, update curr on splice as well

[ Upstream commit c5a595000e2677e865a39f249c056bc05d6e55fd ]

The curr pointer must also be updated on the splice similar to how
we do this for other copy types.

Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Reported-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20231206232706.374377-2-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mv88e6xxx: Restore USXGMII support for 6393X

[ Upstream commit 0c7ed1f9197aecada33a08b022e484a97bf584ba ]

In 4a56212774ac, USXGMII support was added for 6393X, but this was
lost in the PCS conversion (the blamed commit), most likely because
these efforts where more or less done in parallel.

Restore this feature by porting Michal's patch to fit the new
implementation.

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Michal Smulski <michal.smulski@ooma.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Fixes: e5b732a275f5 ("net: dsa: mv88e6xxx: convert 88e639x to phylink_pcs")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Link: https://lore.kernel.org/r/20231205221359.3926018-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: do not accept ACK of bytes we never sent

[ Upstream commit 3d501dd326fb1c73f1b8206d4c6e1d7b15c07e27 ]

This patch is based on a detailed report and ideas from Yepeng Pan
and Christian Rossow.

ACK seq validation is currently following RFC 5961 5.2 guidelines:

   The ACK value is considered acceptable only if
   it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <=
   SND.NXT).  All incoming segments whose ACK value doesn't satisfy the
   above condition MUST be discarded and an ACK sent back.  It needs to
   be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a
   duplicate (SEG.ACK < SND.UNA), it can be ignored.  If the ACK
   acknowledges something not yet sent (SEG.ACK > SND.NXT) then send an
   ACK, drop the segment, and return".  The "ignored" above implies that
   the processing of the incoming data segment continues, which means
   the ACK value is treated as acceptable.  This mitigation makes the
   ACK check more stringent since any ACK < SND.UNA wouldn't be
   accepted, instead only ACKs that are in the range ((SND.UNA -
   MAX.SND.WND) <= SEG.ACK <= SND.NXT) get through.

This can be refined for new (and possibly spoofed) flows,
by not accepting ACK for bytes that were never sent.

This greatly improves TCP security at a little cost.

I added a Fixes: tag to make sure this patch will reach stable trees,
even if the 'blamed' patch was adhering to the RFC.

tp->bytes_acked was added in linux-4.2

Following packetdrill test (courtesy of Yepeng Pan) shows
the issue at hand:

0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1024) = 0

// ---------------- Handshake ------------------- //

// when window scale is set to 14 the window size can be extended to
// 65535 * (2^14) = 1073725440. Linux would accept an ACK packet
// with ack number in (Server_ISN+1-1073725440. Server_ISN+1)
// ,though this ack number acknowledges some data never
// sent by the server.

+0 < S 0:0(0) win 65535 <mss 1400,nop,wscale 14>
+0 > S. 0:0(0) ack 1 <...>
+0 < . 1:1(0) ack 1 win 65535
+0 accept(3, ..., ...) = 4

// For the established connection, we send an ACK packet,
// the ack packet uses ack number 1 - 1073725300 + 2^32,
// where 2^32 is used to wrap around.
// Note: we used 1073725300 instead of 1073725440 to avoid possible
// edge cases.
// 1 - 1073725300 + 2^32 = 3221241997

// Oops, old kernels happily accept this packet.
+0 < . 1:1001(1000) ack 3221241997 win 65535

// After the kernel fix the following will be replaced by a challenge ACK,
// and prior malicious frame would be dropped.
+0 > . 1:1(0) ack 1001

Fixes: 354e4aa391ed ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yepeng Pan <yepeng.pan@cispa.de>
Reported-by: Christian Rossow <rossow@cispa.de>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20231205161841.2702925-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: xt_owner: Fix for unsafe access of sk->sk_socket

[ Upstream commit 7ae836a3d630e146b732fe8ef7d86b243748751f ]

A concurrently running sock_orphan() may NULL the sk_socket pointer in
between check and deref. Follow other users (like nft_meta.c for
instance) and acquire sk_callback_lock before dereferencing sk_socket.

Fixes: 0265ab44bacc ("[NETFILTER]: merge ipt_owner/ip6t_owner in xt_owner")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: validate family when identifying table via handle

[ Upstream commit f6e1532a2697b81da00bfb184e99d15e01e9d98c ]

Validate table family when looking up for it via NFTA_TABLE_HANDLE.

Fixes: 3ecbfd65f50e ("netfilter: nf_tables: allocate handle and delete objects via handle")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: bail out on mismatching dynset and set expressions

[ Upstream commit 3701cd390fd731ee7ae8b8006246c8db82c72bea ]

If dynset expressions provided by userspace is larger than the declared
set expressions, then bail out.

Fixes: 48b0ae046ee9 ("netfilter: nftables: netlink support for several set element expressions")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: fix 'exist' matching on bigendian arches

[ Upstream commit 63331e37fb227e796894b31d713697612c8dee7f ]

Maze reports "tcp option fastopen exists" fails to match on
OpenWrt 22.03.5, r20134-5f15225c1e (5.10.176) router.

"tcp option fastopen exists" translates to:
inet
  [ exthdr load tcpopt 1b @ 34 + 0 present => reg 1 ]
  [ cmp eq reg 1 0x00000001 ]

.. but existing nft userspace generates a 1-byte compare.

On LSB (x86), "*reg32 = 1" is identical to nft_reg_store8(reg32, 1), but
not on MSB, which will place the 1 last. IOW, on bigendian aches the cmp8
is awalys false.

Make sure we store this in a consistent fashion, so existing userspace
will also work on MSB (bigendian).

Regardless of this patch we can also change nft userspace to generate
'reg32 == 0' and 'reg32 != 0' instead of u8 == 0 // u8 == 1 when
adding 'option x missing/exists' expressions as well.

Fixes: 3c1fece8819e ("netfilter: nft_exthdr: Allow checking TCP option presence, too")
Fixes: b9f9a485fb0e ("netfilter: nft_exthdr: add boolean DCCP option matching")
Fixes: 055c4b34b94f ("netfilter: nft_fib: Support existence check")
Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Closes: https://lore.kernel.org/netfilter-devel/CAHo-OozyEqHUjL2-ntATzeZOiuftLWZ_HU6TOM_js4qLfDEAJg@mail.gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: bpf: fix bad registration on nf_defrag

[ Upstream commit 1834d62ae88500f37cba4439c3237aa85242272e ]

We should pass a pointer to global_hook to the get_proto_defrag_hook()
instead of its value, since the passed value won't be updated even if
the request module was loaded successfully.

Log:

[   54.915713] nf_defrag_ipv4 has bad registration
[   54.915779] WARNING: CPU: 3 PID: 6323 at net/netfilter/nf_bpf_link.c:62 get_proto_defrag_hook+0x137/0x160
[   54.915835] CPU: 3 PID: 6323 Comm: fentry Kdump: loaded Tainted: G            E      6.7.0-rc2+ #35
[   54.915839] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
[   54.915841] RIP: 0010:get_proto_defrag_hook+0x137/0x160
[   54.915844] Code: 4f 8c e8 2c cf 68 ff 80 3d db 83 9a 01 00 0f 85 74 ff ff ff 48 89 ee 48 c7 c7 8f 12 4f 8c c6 05 c4 83 9a 01 01 e8 09 ee 5f ff <0f> 0b e9 57 ff ff ff 49 8b 3c 24 4c 63 e5 e8 36 28 6c ff 4c 89 e0
[   54.915849] RSP: 0018:ffffb676003fbdb0 EFLAGS: 00010286
[   54.915852] RAX: 0000000000000023 RBX: ffff9596503d5600 RCX: ffff95996fce08c8
[   54.915854] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff95996fce08c0
[   54.915855] RBP: ffffffff8c4f12de R08: 0000000000000000 R09: 00000000fffeffff
[   54.915859] R10: ffffb676003fbc70 R11: ffffffff8d363ae8 R12: 0000000000000000
[   54.915861] R13: ffffffff8e1f75c0 R14: ffffb676003c9000 R15: 00007ffd15e78ef0
[   54.915864] FS:  00007fb6e9cab740(0000) GS:ffff95996fcc0000(0000) knlGS:0000000000000000
[   54.915867] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   54.915868] CR2: 00007ffd15e75c40 CR3: 0000000101e62006 CR4: 0000000000360ef0
[   54.915870] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   54.915871] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   54.915873] Call Trace:
[   54.915891]  <TASK>
[   54.915894]  ? __warn+0x84/0x140
[   54.915905]  ? get_proto_defrag_hook+0x137/0x160
[   54.915908]  ? __report_bug+0xea/0x100
[   54.915925]  ? report_bug+0x2b/0x80
[   54.915928]  ? handle_bug+0x3c/0x70
[   54.915939]  ? exc_invalid_op+0x18/0x70
[   54.915942]  ? asm_exc_invalid_op+0x1a/0x20
[   54.915948]  ? get_proto_defrag_hook+0x137/0x160
[   54.915950]  bpf_nf_link_attach+0x1eb/0x240
[   54.915953]  link_create+0x173/0x290
[   54.915969]  __sys_bpf+0x588/0x8f0
[   54.915974]  __x64_sys_bpf+0x20/0x30
[   54.915977]  do_syscall_64+0x45/0xf0
[   54.915989]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[   54.915998] RIP: 0033:0x7fb6e9daa51d
[   54.916001] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2b 89 0c 00 f7 d8 64 89 01 48
[   54.916003] RSP: 002b:00007ffd15e78ed8 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
[   54.916006] RAX: ffffffffffffffda RBX: 00007ffd15e78fc0 RCX: 00007fb6e9daa51d
[   54.916007] RDX: 0000000000000040 RSI: 00007ffd15e78ef0 RDI: 000000000000001c
[   54.916009] RBP: 000000000000002d R08: 00007fb6e9e73a60 R09: 0000000000000001
[   54.916010] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000006
[   54.916012] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000
[   54.916014]  </TASK>
[   54.916015] ---[ end trace 0000000000000000 ]---

Fixes: 91721c2d02d3 ("netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: interrupt-controller: Allow #power-domain-cells

[ Upstream commit c0a2755aced969e0125fd68ccd95269b28d8913a ]

MPM provides a single genpd. Allow #power-domain-cells = <0>.

Fixes: 54fc9851c0e0 ("dt-bindings: interrupt-controller: Add Qualcomm MPM support")
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231129-topic-mpmbindingspd-v2-1-acbe909ceee1@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Update Tx link register range

[ Upstream commit 7336fc196748f82646b630d5a2e9d283e200b988 ]

On new silicons the TX channels for transmit level has increased.
This patch fixes the respective register offset range to
configure the newly added channels.

Fixes: b279bbb3314e ("octeontx2-af: NIX Tx scheduler queue config support")
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Add missing mcs flr handler call

[ Upstream commit d431abd0a9aa27be379fb5f8304062071b0f5a7e ]

If mcs resources are attached to PF/VF. These resources need
to be freed on FLR. This patch add missing mcs flr call on PF FLR.

Fixes: bd69476e86fc ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Fix mcs stats register address

[ Upstream commit 3ba98a8c6f8ceb4e01a78f973d8d9017020bbd57 ]

This patch adds the miss mcs stats register
for mcs supported platforms.

Fixes: 9312150af8da ("octeontx2-af: cn10k: mcs: Support for stats collection")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Fix mcs sa cam entries size

[ Upstream commit 9723b2cca1f0e980c53156b52ea73b93966b3c8a ]

On latest silicon versions SA cam entries increased to 256.
This patch fixes the datatype of sa_entries in mcs_hw_info
struct to u16 to hold 256 entries.

Fixes: 080bbd19c9dd ("octeontx2-af: cn10k: mcs: Add mailboxes for port related operations")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Adjust Tx credits when MCS external bypass is disabled

[ Upstream commit dca6fa8644b89f54345e55501b1419316ba5cb29 ]

When MCS external bypass is disabled, MCS returns additional
2 credits(32B) for every packet Tx'ed on LMAC. To account for
these extra credits, NIX_AF_TX_LINKX_NORM_CREDIT.CC_MCS_CNT
needs to be configured as otherwise NIX Tx credits would overflow
and will never be returned to idle state credit count
causing issues with credit control and MTU change.

This patch fixes the same by configuring CC_MCS_CNT at probe
time for MCS enabled SoC's

Fixes: bd69476e86fc ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns: fix fake link up on xge port

[ Upstream commit f708aba40f9c1eeb9c7e93ed4863b5f85b09b288 ]

If a xge port just connect with an optical module and no fiber,
it may have a fake link up because there may be interference on
the hardware. This patch adds an anti-shake to avoid the problem.
And the time of anti-shake is base on tests.

Fixes: b917078c1c10 ("net: hns: Add ACPI support to check SFP present")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns: fix wrong head when modify the tx feature when sending packets

[ Upstream commit 84757d0839451b20b11e993128f0a77393ca50c1 ]

Upon changing the tx feature, the hns driver will modify the
maybe_stop_tx() and fill_desc() functions, if the modify happens
during packet sending, will cause the hardware and software
pointers do not match, and the port can not work anymore.

This patch deletes the maybe_stop_tx() and fill_desc() functions
modification when setting tx feature, and use the skb_is_gro()
to determine which functions to use in the tx path.

Fixes: 38f616da1c28 ("net:hns: Add support of ethtool TSO set option for Hip06 in HNS")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: atlantic: Fix NULL dereference of skb pointer in

[ Upstream commit cbe860be36095e68e4e5561ab43610982fb429fd ]

If is_ptp_ring == true in the loop of __aq_ring_xdp_clean function,
then a timestamp is stored from a packet in a field of skb object,
which is not allocated at the moment of the call (skb == NULL).

Generalize aq_ptp_extract_ts and other affected functions so they don't
work with struct sk_buff*, but with struct skb_shared_hwtstamps*.

Found by Linux Verification Center (linuxtesting.org) with SVACE

Fixes: 26efaef759a1 ("net: atlantic: Implement xdp data plane")
Signed-off-by: Daniil Maximov <daniil31415it@gmail.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20231204085810.1681386-1-daniil31415it@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv4: ip_gre: Avoid skb_pull() failure in ipgre_xmit()

[ Upstream commit 80d875cfc9d3711a029f234ef7d680db79e8fa4b ]

In ipgre_xmit(), skb_pull() may fail even if pskb_inet_may_pull() returns
true. For example, applications can use PF_PACKET to create a malformed
packet with no IP header. This type of packet causes a problem such as
uninit-value access.

This patch ensures that skb_pull() can pull the required size by checking
the skb with pskb_network_may_pull() before skb_pull().

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20231202161441.221135-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: Fix dim work handling in split interrupt mode

[ Upstream commit 4115ba677c35f694b62298e55f0e04ce84eed469 ]

Currently ionic_dim_work() is incorrect when in
split interrupt mode. This is because the interrupt
rate is only being changed for the Rx side even for
dim running on Tx. Fix this by using the qcq from
the container_of macro. Also, introduce some local
variables for a bit of cleanup.

Fixes: a6ff85e0a2d9 ("ionic: remove intr coalesce update from napi")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231204192234.21017-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: fix snprintf format length warning

[ Upstream commit 0ceb3860a67652f9d36dfdecfcd2cb3eb2f4537d ]

Our friendly kernel test robot has reminded us that with a new
check we have a warning about a potential string truncation.
In this case it really doesn't hurt anything, but it is worth
addressing especially since there really is no reason to reserve
so many bytes for our queue names.  It seems that cutting the
queue name buffer length in half stops the complaint.

Fixes: c06107cabea3 ("ionic: more ionic name tweaks")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311300201.lO8v7mKU-lkp@intel.com/
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231204192234.21017-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: fix mid stream window clamp.

[ Upstream commit 58d3aade20cdddbac6c9707ac0f3f5f8c1278b74 ]

After the blamed commit below, if the user-space application performs
window clamping when tp->rcv_wnd is 0, the TCP socket will never be
able to announce a non 0 receive window, even after completely emptying
the receive buffer and re-setting the window clamp to higher values.

Refactor tcp_set_window_clamp() to address the issue: when the user
decreases the current clamp value, set rcv_ssthresh according to the
same logic used at buffer initialization, but ensuring reserved mem
provisioning.

To avoid code duplication factor-out the relevant bits from
tcp_adjust_rcv_ssthresh() in a new helper and reuse it in the above
scenario.

When increasing the clamp value, give the rcv_ssthresh a chance to grow
according to previously implemented heuristic.

Fixes: 3aa7857fe1d7 ("tcp: enable mid stream window clamp")
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/705dad54e6e6e9a010e571bf58e0b35a8ae70503.1701706073.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bnxt: fix a potential use-after-free in bnxt_init_tc

[ Upstream commit d007caaaf052f82ca2340d4c7b32d04a3f5dbf3f ]

When flow_indr_dev_register() fails, bnxt_init_tc will free
bp->tc_info through kfree(). However, the caller function
bnxt_init_one() will ignore this failure and call
bnxt_shutdown_tc() on failure of bnxt_dl_register(), where
a use-after-free happens. Fix this issue by setting
bp->tc_info to NULL after kfree().

Fixes: 627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://lore.kernel.org/r/20231204024004.8245-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: validate tx_coalesce_usecs even if rx_coalesce_usecs is zero

[ Upstream commit a206d9959f5ccd0fb2d54a997c993947ae0e881c ]

In __iavf_set_coalesce, the driver checks both ec->rx_coalesce_usecs and
ec->tx_coalesce_usecs for validity. It does this via a chain if if/else-if
blocks. If every single branch of the series of if statements exited, this
would be fine. However, the rx_coalesce_usecs is checked against zero to
print an informative message if use_adaptive_rx_coalesce is enabled. If
this check is true, it short circuits the entire chain of statements,
preventing validation of the tx_coalesce_usecs field.

Indeed, since commit e792779e6b63 ("iavf: Prevent changing static ITR
values if adaptive moderation is on") the iavf driver actually rejects any
change to the tx_coalesce_usecs or rx_coalesce_usecs when
use_adaptive_tx_coalesce or use_adaptive_rx_coalesce is enabled, making
this checking a bit redundant.

Fix this error by removing the unnecessary and redundant checks for
use_adaptive_rx_coalesce and use_adaptive_tx_coalesce. Since zero is a
valid value, and since the tx_coalesce_usecs and rx_coalesce_usecs fields
are already unsigned, remove the minimum value check. This allows assigning
an ITR value ranging from 0-8160 as described by the printed message.

Fixes: 65e87c0398f5 ("i40evf: support queue-specific settings for interrupt moderation")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix unexpected MFS warning message

[ Upstream commit 7d9f22b3d3ef379ed05bd3f3e2de83dfa8da8258 ]

Commit 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") added
a warning message that reports unexpected size of port's MFS (max
frame size) value. This message use for the port number local
variable 'i' that is wrong.
In i40e_probe() this 'i' variable is used only to iterate VSIs
to find FDIR VSI:

<code>
...
/* if FDIR VSI was set up, start it now */
        for (i = 0; i < pf->num_alloc_vsi; i++) {
                if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
                        i40e_vsi_open(pf->vsi[i]);
                        break;
                }
        }
...
</code>

So the warning message use for the port number index of FDIR VSI
if this exists or pf->num_alloc_vsi if not.

Fix the message by using 'pf->hw.port' for the port number.

Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Restore fix disabling RX VLAN filtering

[ Upstream commit 4e7f0087b058cc3cab8f3c32141b51aa5457d298 ]

Fix setting dis_rx_filtering depending on whether port vlan is being
turned on or off. This was originally fixed in commit c793f8ea15e3 ("ice:
Fix disabling Rx VLAN filtering with port VLAN enabled"), but while
refactoring ice_vf_vsi_init_vlan_ops(), the fix has been lost. Restore the
fix along with the original comment from that change.

Also delete duplicate lines in ice_port_vlan_on().

Fixes: 2946204b3fa8 ("ice: implement bridge port vlan")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: fix a use-after-free in rvu_npa_register_reporters

[ Upstream commit 3c91c909f13f0c32b0d54d75c3f798479b1a84f5 ]

The rvu_dl will be freed in rvu_npa_health_reporters_destroy(rvu_dl)
after the create_workqueue fails, and after that free, the rvu_dl will
be translate back through rvu_npa_health_reporters_create,
rvu_health_reporters_create, and rvu_register_dl. Finally it goes to the
err_dl_health label, being freed again in
rvu_health_reporters_destroy(rvu) by rvu_npa_health_reporters_destroy.
In the second calls of rvu_npa_health_reporters_destroy, however,
it uses rvu_dl->rvu_npa_health_reporter, which is already freed at
the end of rvu_npa_health_reporters_destroy in the first call.

So this patch prevents the first destroy by instantly returning -ENONMEN
when create_workqueue fails. In addition, since the failure of
create_workqueue is the only entrence of label err, it has been
integrated into the error-handling path of create_workqueue.

Fixes: f1168d1e207c ("octeontx2-af: Add devlink health reporters for NPA")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20231202095902.3264863-1-alexious@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xsk: Skip polling event check for unbound socket

[ Upstream commit e4d008d49a7135214e0ee70537405b6a069e3a3f ]

In xsk_poll(), checking available events and setting mask bits should
be executed only when a socket has been bound. Setting mask bits for
unbound socket is meaningless.

Currently, it checks events even when xsk_check_common() failed.
To prevent this, we move goto location (skip_tx) after that checking.

Fixes: 1596dae2f17e ("xsk: check IFF_UP earlier in Tx path")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20231201061048.GA1510@libra05
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: fix FPE events losing

[ Upstream commit 37e4b8df27bc68340f3fc80dbb27e3549c7f881c ]

The status bits of register MAC_FPE_CTRL_STS are clear on read. Using
32-bit read for MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and
dwmac5_fpe_send_mpacket() clear the status bits. Then the stmmac interrupt
handler missing FPE event status and leads to FPE handshaking failure and
retries.
To avoid clear status bits of MAC_FPE_CTRL_STS in dwmac5_fpe_configure()
and dwmac5_fpe_send_mpacket(), add fpe_csr to stmmac_fpe_cfg structure to
cache the control bits of MAC_FPE_CTRL_STS and to avoid reading
MAC_FPE_CTRL_STS in those methods.

Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jianheng Zhang <Jianheng.Zhang@synopsys.com>
Link: https://lore.kernel.org/r/CY5PR12MB637225A7CF529D5BE0FBE59CBF81A@CY5PR12MB6372.namprd12.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: consider both Rx and Tx packet stats for adaptive interrupt coalescing

[ Upstream commit adbf100fc47001c93d7e513ecac6fd6e04d5b4a1 ]

The current adaptive interrupt coalescing code updates only rx
packet stats for dim algorithm. This patch also updates tx packet
stats which will be useful when there is only tx traffic.
Also moved configuring hardware adaptive interrupt setting to
driver dim callback.

Fixes: 6e144b47f560 ("octeontx2-pf: Add support for adaptive interrupt coalescing")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20231201053330.3903694-1-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arcnet: restoring support for multiple Sohard Arcnet cards

[ Upstream commit 6b17a597fc2f13aaaa0a2780eb7edb9ae7ac9aea ]

Probe of Sohard Arcnet cards fails,
if 2 or more cards are installed in a system.
See kernel log:
[    2.759203] arcnet: arcnet loaded
[    2.763648] arcnet:com20020: COM20020 chipset support (by David Woodhouse et al.)
[    2.770585] arcnet:com20020_pci: COM20020 PCI support
[    2.772295] com20020 0000:02:00.0: enabling device (0000 -> 0003)
[    2.772354] (unnamed net_device) (uninitialized): PLX-PCI Controls
...
[    3.071301] com20020 0000:02:00.0 arc0-0 (uninitialized): PCI COM20020: station FFh found at F080h, IRQ 101.
[    3.071305] com20020 0000:02:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s
[    3.071534] com20020 0000:07:00.0: enabling device (0000 -> 0003)
[    3.071581] (unnamed net_device) (uninitialized): PLX-PCI Controls
...
[    3.369501] com20020 0000:07:00.0: Led pci:green:tx:0-0 renamed to pci:green:tx:0-0_1 due to name collision
[    3.369535] com20020 0000:07:00.0: Led pci:red:recon:0-0 renamed to pci:red:recon:0-0_1 due to name collision
[    3.370586] com20020 0000:07:00.0 arc0-0 (uninitialized): PCI COM20020: station E1h found at C000h, IRQ 35.
[    3.370589] com20020 0000:07:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s
[    3.370608] com20020: probe of 0000:07:00.0 failed with error -5

commit 5ef216c1f848 ("arcnet: com20020-pci: add rotary index support")
changes the device name of all COM20020 based PCI cards,
even if only some cards support this:
snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i);

The error happens because all Sohard Arcnet cards would be called arc0-0,
since the Sohard Arcnet cards don't have a PLX rotary coder.
I.e. EAE Arcnet cards have a PLX rotary coder,
which sets the first decimal, ensuring unique devices names.

This patch adds two new card feature flags to indicate
which cards support LEDs and the PLX rotary coder.
For EAE based cards the names still depend on the PLX rotary coder
(untested, since missing EAE hardware).
For Sohard based cards, this patch will result in devices
being called arc0, arc1, ... (tested).

Signed-off-by: Thomas Reichinger <thomas.reichinger@sohard.de>
Fixes: 5ef216c1f848 ("arcnet: com20020-pci: add rotary index support")
Link: https://lore.kernel.org/r/20231130113503.6812-1-thomas.reichinger@sohard.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/mellanox: Check devm_hwmon_device_register_with_groups() return value

[ Upstream commit 3494a594315b56516988afb6854d75dee5b501db ]

devm_hwmon_device_register_with_groups() returns an error pointer upon
failure. Check its return value for errors.

Compile-tested only.

Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20231201055447.2356001-1-chentao@kylinos.cn
[ij: split the change into two]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/mellanox: Add null pointer checks for devm_kasprintf()

[ Upstream commit 2c7c857f5fed997be93047d2de853d7f10c8defe ]

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.

Compile-tested only.

Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20231201055447.2356001-1-chentao@kylinos.cn
[ij: split the change into two]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxbf-bootctl: correctly identify secure boot with development keys

[ Upstream commit d4eef75279f5e9d594f5785502038c763ce42268 ]

The secure boot state of the BlueField SoC is represented by two bits:
                0 = production state
                1 = secure boot enabled
                2 = non-secure (secure boot disabled)
                3 = RMA state
There is also a single bit to indicate whether production keys or
development keys are being used when secure boot is enabled.
This single bit (specified by MLXBF_BOOTCTL_SB_DEV_MASK) only has
meaning if secure boot state equals 1 (secure boot enabled).

The secure boot states are as follows:
- “GA secured” is when secure boot is enabled with official production keys.
- “Secured (development)” is when secure boot is enabled with development keys.

Without this fix “GA Secured” is displayed on development cards which is
misleading. This patch updates the logic in "lifecycle_state_show()" to
handle the case where the SoC is configured for secure boot and is using
development keys.

Fixes: 79e29cb8fbc5c ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc")
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20231130183515.17214-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en()

[ Upstream commit 79321a793945fdbff2f405f84712d0ab81bed287 ]

Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in r8153_aldps_en().

Fixes: 4214cc550bf9 ("r8152: check if disabling ALDPS is finished")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()

[ Upstream commit 8c53a7bd706535a9cf4e2ec3a4e8d61d46353ca0 ]

Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in r8153_pre_firmware_1().

Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash()

[ Upstream commit 8a67b47fced9f6a84101eb9ec5ce4c7d64204bc7 ]

Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in
r8156b_wait_loading_flash().

Fixes: 195aae321c82 ("r8152: support new chips")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: Add RTL8152_INACCESSIBLE checks to more loops

[ Upstream commit 32a574c7e2685aa8138754d4d755f9246cc6bd48 ]

Previous commits added checks for RTL8152_INACCESSIBLE in the loops in
the driver. There are still a few more that keep tripping the driver
up in error cases and make things take longer than they should. Add
those in.

All the loops that are part of this commit existed in some form or
another since the r8152 driver was first introduced, though
RTL8152_INACCESSIBLE was known as RTL8152_UNPLUG before commit
715f67f33af4 ("r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE")

Fixes: ac718b69301c ("net/usb: new driver for RTL8152")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: Hold the rtnl_lock for all of reset

[ Upstream commit e62adaeecdc6a1e8ae86e7f3f9f8223a3ede94f5 ]

As of commit d9962b0d4202 ("r8152: Block future register access if
register access fails") there is a race condition that can happen
between the USB device reset thread and napi_enable() (not) getting
called during rtl8152_open(). Specifically:
* While rtl8152_open() is running we get a register access error
  that's _not_ -ENODEV and queue up a USB reset.
* rtl8152_open() exits before calling napi_enable() due to any reason
  (including usb_submit_urb() returning an error).

In that case:
* Since the USB reset is perform in a separate thread asynchronously,
  it can run at anytime USB device lock is not held - even before
  rtl8152_open() has exited with an error and caused __dev_open() to
  clear the __LINK_STATE_START bit.
* The rtl8152_pre_reset() will notice that the netif_running() returns
  true (since __LINK_STATE_START wasn't cleared) so it won't exit
  early.
* rtl8152_pre_reset() will then hang in napi_disable() because
  napi_enable() was never called.

We can fix the race by making sure that the r8152 reset routines don't
run at the same time as we're opening the device. Specifically we need
the reset routines in their entirety rely on the return value of
netif_running(). The only way to reliably depend on that is for them
to hold the rntl_lock() mutex for the duration of reset.

Grabbing the rntl_lock() mutex for the duration of reset seems like a
long time, but reset is not expected to be common and the rtnl_lock()
mutex is already held for long durations since the core grabs it
around the open/close calls.

Fixes: d9962b0d4202 ("r8152: Block future register access if register access fails")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hv_netvsc: rndis_filter needs to select NLS

[ Upstream commit 6c89f49964375c904cea33c0247467873f4daf2c ]

rndis_filter uses utf8s_to_utf16s() which is provided by setting
NLS, so select NLS to fix the build error:

ERROR: modpost: "utf8s_to_utf16s" [drivers/net/hyperv/hv_netvsc.ko] undefined!

Fixes: 1ce09e899d28 ("hyperv: Add support for setting MAC from within guests")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20231130055853.19069-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix a verifier bug due to incorrect branch offset comparison with cpu=v4

[ Upstream commit dfce9cb3140592b886838e06f3e0c25fea2a9cae ]

Bpf cpu=v4 support is introduced in [1] and Commit 4cd58e9af8b9
("bpf: Support new 32bit offset jmp instruction") added support for new
32bit offset jmp instruction. Unfortunately, in function
bpf_adj_delta_to_off(), for new branch insn with 32bit offset, the offset
(plus/minor a small delta) compares to 16-bit offset bound
[S16_MIN, S16_MAX], which caused the following verification failure:
  $ ./test_progs-cpuv4 -t verif_scale_pyperf180
  ...
  insn 10 cannot be patched due to 16-bit range
  ...
  libbpf: failed to load object 'pyperf180.bpf.o'
  scale_test:FAIL:expect_success unexpected error: -12 (errno 12)
  #405     verif_scale_pyperf180:FAIL

Note that due to recent llvm18 development, the patch [2] (already applied
in bpf-next) needs to be applied to bpf tree for testing purpose.

The fix is rather simple. For 32bit offset branch insn, the adjusted
offset compares to [S32_MIN, S32_MAX] and then verification succeeded.

  [1] https://lore.kernel.org/all/20230728011143.3710005-1-yonghong.song@linux.dev
  [2] https://lore.kernel.org/bpf/20231110193644.3130906-1-yonghong.song@linux.dev

Fixes: 4cd58e9af8b9 ("bpf: Support new 32bit offset jmp instruction")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231201024640.3417057-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Check return value of nix_get_nixlf before using nixlf

[ Upstream commit 830139e7b6911266a84a77e1f18abf758995cc89 ]

If a NIXLF is not attached to a PF/VF device then
nix_get_nixlf function fails and returns proper error
code. But npc_get_default_entry_action does not check it
and uses garbage value in subsequent calls. Fix this
by cheking the return value of nix_get_nixlf.

Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: Add missing mutex lock in otx2_get_pauseparam

[ Upstream commit 9572c949385aa2ef10368287c439bcb7935137c8 ]

All the mailbox messages sent to AF needs to be guarded
by mutex lock. Add the missing lock in otx2_get_pauseparam
function.

Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: fix potential NULL deref in fib6_add()

[ Upstream commit 75475bb51e78a3f54ad2f69380f2a1c985e85f2d ]

If fib6_find_prefix() returns NULL, we should silently fallback
using fib6_null_entry regardless of RT6_DEBUG value.

syzbot reported:

WARNING: CPU: 0 PID: 5477 at net/ipv6/ip6_fib.c:1516 fib6_add+0x310d/0x3fa0 net/ipv6/ip6_fib.c:1516
Modules linked in:
CPU: 0 PID: 5477 Comm: syz-executor.0 Not tainted 6.7.0-rc2-syzkaller-00029-g9b6de136b5f0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:fib6_add+0x310d/0x3fa0 net/ipv6/ip6_fib.c:1516
Code: 00 48 8b 54 24 68 e8 42 22 00 00 48 85 c0 74 14 49 89 c6 e8 d5 d3 c2 f7 eb 5d e8 ce d3 c2 f7 e9 ca 00 00 00 e8 c4 d3 c2 f7 90 <0f> 0b 90 48 b8 00 00 00 00 00 fc ff df 48 8b 4c 24 38 80 3c 01 00
RSP: 0018:ffffc90005067740 EFLAGS: 00010293
RAX: ffffffff89cba5bc RBX: ffffc90005067ab0 RCX: ffff88801a2e9dc0
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffffc90005067980 R08: ffffffff89cbca85 R09: 1ffff110040d4b85
R10: dffffc0000000000 R11: ffffed10040d4b86 R12: 00000000ffffffff
R13: 1ffff110051c3904 R14: ffff8880206a5c00 R15: ffff888028e1c820
FS: 00007f763783c6c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f763783bff8 CR3: 000000007f74d000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__ip6_ins_rt net/ipv6/route.c:1303 [inline]
ip6_route_add+0x88/0x120 net/ipv6/route.c:3847
ipv6_route_ioctl+0x525/0x7b0 net/ipv6/route.c:4467
inet6_ioctl+0x21a/0x270 net/ipv6/af_inet6.c:575
sock_do_ioctl+0x152/0x460 net/socket.c:1220
sock_ioctl+0x615/0x8c0 net/socket.c:1339
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl+0xf8/0x170 fs/ioctl.c:857
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x45/0x110 arch/x86/entry/common.c:82

Fixes: 7bbfe00e0252 ("ipv6: fix general protection fault in fib6_add()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231129160630.3509216-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: wmi: Skip blocks with zero instances

[ Upstream commit cbf54f37600e874d82886aa3b2f471778cae01ce ]

Some machines like the HP Omen 17 ck2000nf contain WMI blocks
with zero instances, so any WMI driver which tries to handle the
associated WMI device will fail.
Skip such WMI blocks to avoid confusing any WMI drivers.

Reported-by: Alexis Belmonte <alexbelm48@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218188
Fixes: bff431e49ff5 ("ACPI: WMI: Add ACPI-WMI mapping driver")
Tested-by: Alexis Belmonte <alexbelm48@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231129181654.5800-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: dynamic: Fix of_reconfig_get_state_change() return value documentation

[ Upstream commit d79972789d17499b6091ded2fc0c6763c501a5ba ]

The documented numeric return values do not match the actual returned
values. Fix them by using the enum names instead of raw numbers.

Fixes: b53a2340d0d3 ("of/reconfig: Add of_reconfig_get_state_change() of notifier helper.")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20231123-fix-of_reconfig_get_state_change-docs-v1-1-f51892050ff9@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: asus-wmi: Move i8042 filter install to shared asus-wmi code

[ Upstream commit b52cbca22cbf6c9d2700c1e576d0ddcc670e49d5 ]

asus-nb-wmi calls i8042_install_filter() in some cases, but it never
calls i8042_remove_filter(). This means that a dangling pointer to
the filter function is left after rmmod leading to crashes.

Fix this by moving the i8042-filter installation to the shared
asus-wmi code and also remove it from the shared code on driver unbind.

Fixes: b5643539b825 ("platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A")
Cc: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231120154235.610808-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt: dt-extract-compatibles: Don't follow symlinks when walking tree

[ Upstream commit 8f51593cdcab82fb23ef2e1a0010b2e6f99aae02 ]

The iglob function, which we use to find C source files in the kernel
tree, always follows symbolic links. This can cause unintentional
recursions whenever a symbolic link points to a parent directory. A
common scenario is building the kernel with the output set to a
directory inside the kernel tree, which will contain such a symlink.

Instead of using the iglob function, use os.walk to traverse the
directory tree, which by default doesn't follow symbolic links. fnmatch
is then used to match the glob on the filename, as well as ignore hidden
files (which were ignored by default with iglob).

This approach runs just as fast as using iglob.

Fixes: b6acf8073517 ("dt: Add a check for undocumented compatible strings in kernel")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Closes: https://lore.kernel.org/all/e90cb52f-d55b-d3ba-3933-6cc7b43fcfbc@arm.com
Signed-off-by: "Nícolas F. R. A. Prado" <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20231107225624.9811-1-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt: dt-extract-compatibles: Handle cfile arguments in generator function

[ Upstream commit eb2139fc0da63b89a2ad565ecd8133a37e8b7c4f ]

Move the handling of the cfile arguments to a separate generator
function to avoid redundancy.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230828211424.2964562-2-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Stable-dep-of: 8f51593cdcab ("dt: dt-extract-compatibles: Don't follow symlinks when walking tree")
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/tdx: Allow 32-bit emulation by default

[ upstream commit f4116bfc44621882556bbf70f5284fbf429a5cf6 ]

32-bit emulation was disabled on TDX to prevent a possible attack by
a VMM injecting an interrupt on vector 0x80.

Now that int80_emulation() has a check for external interrupts the
limitation can be lifted.

To distinguish software interrupts from external ones, int80_emulation()
checks the APIC ISR bit relevant to the 0x80 vector. For
software interrupts, this bit will be 0.

On TDX, the VAPIC state (including ISR) is protected and cannot be
manipulated by the VMM. The ISR bit is set by the microcode flow during
the handling of posted interrupts.

[ dhansen: more changelog tweaks ]

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry: Do not allow external 0x80 interrupts

[ upstream commit 55617fb991df535f953589586468612351575704 ]

The INT 0x80 instruction is used for 32-bit x86 Linux syscalls. The
kernel expects to receive a software interrupt as a result of the INT
0x80 instruction. However, an external interrupt on the same vector
also triggers the same codepath.

An external interrupt on vector 0x80 will currently be interpreted as a
32-bit system call, and assuming that it was a user context.

Panic on external interrupts on the vector.

To distinguish software interrupts from external ones, the kernel checks
the APIC ISR bit relevant to the 0x80 vector. For software interrupts,
this bit will be 0.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry: Convert INT 0x80 emulation to IDTENTRY

[ upstream commit be5341eb0d43b1e754799498bd2e8756cc167a41 ]

There is no real reason to have a separate ASM entry point implementation
for the legacy INT 0x80 syscall emulation on 64-bit.

IDTENTRY provides all the functionality needed with the only difference
that it does not:

  - save the syscall number (AX) into pt_regs::orig_ax
  - set pt_regs::ax to -ENOSYS

Both can be done safely in the C code of an IDTENTRY before invoking any of
the syscall related functions which depend on this convention.

Aside of ASM code reduction this prepares for detecting and handling a
local APIC injected vector 0x80.

[ kirill.shutemov: More verbose comments ]
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/coco: Disable 32-bit emulation by default on TDX and SEV

[ upstream commit b82a8dbd3d2f4563156f7150c6f2ecab6e960b30 ]

The INT 0x80 instruction is used for 32-bit x86 Linux syscalls. The
kernel expects to receive a software interrupt as a result of the INT
0x80 instruction. However, an external interrupt on the same vector
triggers the same handler.

The kernel interprets an external interrupt on vector 0x80 as a 32-bit
system call that came from userspace.

A VMM can inject external interrupts on any arbitrary vector at any
time.  This remains true even for TDX and SEV guests where the VMM is
untrusted.

Put together, this allows an untrusted VMM to trigger int80 syscall
handling at any given point. The content of the guest register file at
that moment defines what syscall is triggered and its arguments. It
opens the guest OS to manipulation from the VMM side.

Disable 32-bit emulation by default for TDX and SEV. User can override
it with the ia32_emulation=y command line option.

[ dhansen: reword the changelog ]

Reported-by: Supraja Sridhara <supraja.sridhara@inf.ethz.ch>
Reported-by: Benedict Schlüter <benedict.schlueter@inf.ethz.ch>
Reported-by: Mark Kuhne <mark.kuhne@inf.ethz.ch>
Reported-by: Andrin Bertschi <andrin.bertschi@inf.ethz.ch>
Reported-by: Shweta Shinde <shweta.shinde@inf.ethz.ch>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # 6.0+: 1da5c9b x86: Introduce ia32_enabled()
Cc: <stable@vger.kernel.org> # 6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: Introduce ia32_enabled()

[ upstream commit 1da5c9bc119d3a749b519596b93f9b2667e93c4a ]

IA32 support on 64bit kernels depends on whether CONFIG_IA32_EMULATION
is selected or not. As it is a compile time option it doesn't
provide the flexibility to have distributions set their own policy for
IA32 support and give the user the flexibility to override it.

As a first step introduce ia32_enabled() which abstracts whether IA32
compat is turned on or off. Upcoming patches will implement
the ability to set IA32 compat state at boot time.

Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230623111409.3047467-2-nik.borisov@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm-crypt: start allocating with MAX_ORDER

[ Upstream commit 13648e04a9b831b3dfa5cf3887dfa6cf8fe5fe69 ]

Commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely")
changed the meaning of MAX_ORDER from exclusive to inclusive. So, we
can allocate compound pages with up to 1 << MAX_ORDER pages.

Reflect this change in dm-crypt and start trying to allocate compound
pages with MAX_ORDER.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: correct chunk_ptr to a pointer to chunk.

[ Upstream commit 50d51374b498457c4dea26779d32ccfed12ddaff ]

The variable "chunk_ptr" should be a pointer pointing
to a struct drm_amdgpu_cs_chunk instead of to a pointer
of that.

Signed-off-by: YuanShang <YuanShang.Mao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: finalizing mem_partitions at the end of GMC v9 sw_fini

[ Upstream commit bdb72185d310fc8049c7ea95221d640e9e7165e5 ]

The valid num_mem_partitions is required during ttm pool fini,
thus move the cleanup at the end of the function.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Do not program VF copy regs in mmhub v1.8 under SRIOV (v2)

[ Upstream commit 0288603040c38ccfeb5342f34a52673366d90038 ]

MC_VM_AGP_* registers should not be programmed by guest driver.

v2: move early return outside of loop

Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Samir Dhume <samir.dhume@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kconfig: fix memory leak from range properties

[ Upstream commit ae1eff0349f2e908fc083630e8441ea6dc434dc0 ]

Currently, sym_validate_range() duplicates the range string using
xstrdup(), which is overwritten by a subsequent sym_calc_value() call.
It results in a memory leak.

Instead, only the pointer should be copied.

Below is a test case, with a summary from Valgrind.

[Test Kconfig]

  config FOO
          int "foo"
          range 10 20

[Test .config]

  CONFIG_FOO=0

[Before]

  LEAK SUMMARY:
     definitely lost: 3 bytes in 1 blocks
     indirectly lost: 0 bytes in 0 blocks
       possibly lost: 0 bytes in 0 blocks
     still reachable: 17,465 bytes in 21 blocks
          suppressed: 0 bytes in 0 blocks

[After]

  LEAK SUMMARY:
     definitely lost: 0 bytes in 0 blocks
     indirectly lost: 0 bytes in 0 blocks
       possibly lost: 0 bytes in 0 blocks
     still reachable: 17,462 bytes in 20 blocks
          suppressed: 0 bytes in 0 blocks

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

modpost: fix section mismatch message for RELA

[ Upstream commit 1c4a7587d1bbee0fd53b63af60e4244a62775f57 ]

The section mismatch check prints a bogus symbol name on some
architectures.

[test code]

  #include <linux/init.h>

  int __initdata foo;
  int get_foo(void) { return foo; }

If you compile it with GCC for riscv or loongarch, modpost will show an
incorrect symbol name:

  WARNING: modpost: vmlinux: section mismatch in reference: get_foo+0x8 (section: .text) -> done (section: .init.data)

To get the correct symbol address, the st_value must be added.

This issue has never been noticed since commit 93684d3b8062 ("kbuild:
include symbol names in section mismatch warnings") presumably because
st_value becomes zero on most architectures when the referenced symbol
is looked up. It is not true for riscv or loongarch, at least.

With this fix, modpost will show the correct symbol name:

  WARNING: modpost: vmlinux: section mismatch in reference: get_foo+0x8 (section: .text) -> foo (section: .init.data)

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tg3: Increment tx_dropped in tg3_tso_bug()

[ Upstream commit 17dd5efe5f36a96bd78012594fabe21efb01186b ]

tg3_tso_bug() drops a packet if it cannot be segmented for any reason.
The number of discarded frames should be incremented accordingly.

Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com>
Signed-off-by: Vincent Wong <vincent.wong2@spacex.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20231113182350.37472-2-alexey.pakhunov@spacex.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tg3: Move the [rt]x_dropped counters to tg3_napi

[ Upstream commit 907d1bdb8b2cc0357d03a1c34d2a08d9943760b1 ]

This change moves [rt]x_dropped counters to tg3_napi so that they can be
updated by a single writer, race-free.

Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com>
Signed-off-by: Vincent Wong <vincent.wong2@spacex.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231113182350.37472-1-alexey.pakhunov@spacex.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

zstd: Fix array-index-out-of-bounds UBSAN warning

[ Upstream commit 77618db346455129424fadbbaec596a09feaf3bb ]

Zstd used an array of length 1 to mean a flexible array for C89
compatibility. Switch to a C99 flexible array to fix the UBSAN warning.

Tested locally by booting the kernel and writing to and reading from a
BtrFS filesystem with zstd compression enabled. I was unable to reproduce
the issue before the fix, however it is a trivial change.

Link: https://lkml.kernel.org/r/20231012213428.1390905-1-nickrterrell@gmail.com
Reported-by: syzbot+1f2eb3e8cd123ffce499@syzkaller.appspotmail.com
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nouveau: use an rwlock for the event lock.

[ Upstream commit a2e36cd56041e277d7d81d35638fd8d9731e21f5 ]

This allows it to break the following circular locking dependency.

Aug 10 07:01:29 dg1test kernel: ======================================================
Aug 10 07:01:29 dg1test kernel: WARNING: possible circular locking dependency detected
Aug 10 07:01:29 dg1test kernel: 6.4.0-rc7+ #10 Not tainted
Aug 10 07:01:29 dg1test kernel: ------------------------------------------------------
Aug 10 07:01:29 dg1test kernel: wireplumber/2236 is trying to acquire lock:
Aug 10 07:01:29 dg1test kernel: ffff8fca5320da18 (&fctx->lock){-...}-{2:2}, at: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel:
                                but task is already holding lock:
Aug 10 07:01:29 dg1test kernel: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel:
                                which lock already depends on the new lock.
Aug 10 07:01:29 dg1test kernel:
                                the existing dependency chain (in reverse order) is:
Aug 10 07:01:29 dg1test kernel:
                                -> #3 (&event->list_lock#2){-...}-{2:2}:
Aug 10 07:01:29 dg1test kernel:        _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel:        nvkm_event_ntfy+0x50/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        ga100_fifo_nonstall_intr+0x24/0x30 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_intr+0x12c/0x240 [nouveau]
Aug 10 07:01:29 dg1test kernel:        __handle_irq_event_percpu+0x88/0x240
Aug 10 07:01:29 dg1test kernel:        handle_irq_event+0x38/0x80
Aug 10 07:01:29 dg1test kernel:        handle_edge_irq+0xa3/0x240
Aug 10 07:01:29 dg1test kernel:        __common_interrupt+0x72/0x160
Aug 10 07:01:29 dg1test kernel:        common_interrupt+0x60/0xe0
Aug 10 07:01:29 dg1test kernel:        asm_common_interrupt+0x26/0x40
Aug 10 07:01:29 dg1test kernel:
                                -> #2 (&device->intr.lock){-...}-{2:2}:
Aug 10 07:01:29 dg1test kernel:        _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel:        nvkm_inth_allow+0x2c/0x80 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_event_ntfy_state+0x181/0x250 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_event_ntfy_allow+0x63/0xd0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_uevent_mthd+0x4d/0x70 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_ioctl+0x10b/0x250 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvif_object_mthd+0xa8/0x1f0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvif_event_allow+0x2a/0xa0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nouveau_fence_enable_signaling+0x78/0x80 [nouveau]
Aug 10 07:01:29 dg1test kernel:        __dma_fence_enable_signaling+0x5e/0x100
Aug 10 07:01:29 dg1test kernel:        dma_fence_add_callback+0x4b/0xd0
Aug 10 07:01:29 dg1test kernel:        nouveau_cli_work_queue+0xae/0x110 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nouveau_gem_object_close+0x1d1/0x2a0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        drm_gem_handle_delete+0x70/0xe0 [drm]
Aug 10 07:01:29 dg1test kernel:        drm_ioctl_kernel+0xa5/0x150 [drm]
Aug 10 07:01:29 dg1test kernel:        drm_ioctl+0x256/0x490 [drm]
Aug 10 07:01:29 dg1test kernel:        nouveau_drm_ioctl+0x5a/0xb0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        __x64_sys_ioctl+0x91/0xd0
Aug 10 07:01:29 dg1test kernel:        do_syscall_64+0x3c/0x90
Aug 10 07:01:29 dg1test kernel:        entry_SYSCALL_64_after_hwframe+0x72/0xdc
Aug 10 07:01:29 dg1test kernel:
                                -> #1 (&event->refs_lock#4){....}-{2:2}:
Aug 10 07:01:29 dg1test kernel:        _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel:        nvkm_event_ntfy_state+0x37/0x250 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_event_ntfy_allow+0x63/0xd0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_uevent_mthd+0x4d/0x70 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_ioctl+0x10b/0x250 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvif_object_mthd+0xa8/0x1f0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvif_event_allow+0x2a/0xa0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nouveau_fence_enable_signaling+0x78/0x80 [nouveau]
Aug 10 07:01:29 dg1test kernel:        __dma_fence_enable_signaling+0x5e/0x100
Aug 10 07:01:29 dg1test kernel:        dma_fence_add_callback+0x4b/0xd0
Aug 10 07:01:29 dg1test kernel:        nouveau_cli_work_queue+0xae/0x110 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nouveau_gem_object_close+0x1d1/0x2a0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        drm_gem_handle_delete+0x70/0xe0 [drm]
Aug 10 07:01:29 dg1test kernel:        drm_ioctl_kernel+0xa5/0x150 [drm]
Aug 10 07:01:29 dg1test kernel:        drm_ioctl+0x256/0x490 [drm]
Aug 10 07:01:29 dg1test kernel:        nouveau_drm_ioctl+0x5a/0xb0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        __x64_sys_ioctl+0x91/0xd0
Aug 10 07:01:29 dg1test kernel:        do_syscall_64+0x3c/0x90
Aug 10 07:01:29 dg1test kernel:        entry_SYSCALL_64_after_hwframe+0x72/0xdc
Aug 10 07:01:29 dg1test kernel:
                                -> #0 (&fctx->lock){-...}-{2:2}:
Aug 10 07:01:29 dg1test kernel:        __lock_acquire+0x14e3/0x2240
Aug 10 07:01:29 dg1test kernel:        lock_acquire+0xc8/0x2a0
Aug 10 07:01:29 dg1test kernel:        _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel:        nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_client_event+0xf/0x20 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_event_ntfy+0x9b/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        ga100_fifo_nonstall_intr+0x24/0x30 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_intr+0x12c/0x240 [nouveau]
Aug 10 07:01:29 dg1test kernel:        __handle_irq_event_percpu+0x88/0x240
Aug 10 07:01:29 dg1test kernel:        handle_irq_event+0x38/0x80
Aug 10 07:01:29 dg1test kernel:        handle_edge_irq+0xa3/0x240
Aug 10 07:01:29 dg1test kernel:        __common_interrupt+0x72/0x160
Aug 10 07:01:29 dg1test kernel:        common_interrupt+0x60/0xe0
Aug 10 07:01:29 dg1test kernel:        asm_common_interrupt+0x26/0x40
Aug 10 07:01:29 dg1test kernel:
                                other info that might help us debug this:
Aug 10 07:01:29 dg1test kernel: Chain exists of:
                                  &fctx->lock --> &device->intr.lock --> &event->list_lock#2
Aug 10 07:01:29 dg1test kernel:  Possible unsafe locking scenario:
Aug 10 07:01:29 dg1test kernel:        CPU0                    CPU1
Aug 10 07:01:29 dg1test kernel:        ----                    ----
Aug 10 07:01:29 dg1test kernel:   lock(&event->list_lock#2);
Aug 10 07:01:29 dg1test kernel:                                lock(&device->intr.lock);
Aug 10 07:01:29 dg1test kernel:                                lock(&event->list_lock#2);
Aug 10 07:01:29 dg1test kernel:   lock(&fctx->lock);
Aug 10 07:01:29 dg1test kernel:
                                 *** DEADLOCK ***
Aug 10 07:01:29 dg1test kernel: 2 locks held by wireplumber/2236:
Aug 10 07:01:29 dg1test kernel:  #0: ffff8fca53177bf8 (&device->intr.lock){-...}-{2:2}, at: nvkm_intr+0x29/0x240 [nouveau]
Aug 10 07:01:29 dg1test kernel:  #1: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel:
                                stack backtrace:
Aug 10 07:01:29 dg1test kernel: CPU: 6 PID: 2236 Comm: wireplumber Not tainted 6.4.0-rc7+ #10
Aug 10 07:01:29 dg1test kernel: Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021
Aug 10 07:01:29 dg1test kernel: Call Trace:
Aug 10 07:01:29 dg1test kernel:  <TASK>
Aug 10 07:01:29 dg1test kernel:  dump_stack_lvl+0x5b/0x90
Aug 10 07:01:29 dg1test kernel:  check_noncircular+0xe2/0x110
Aug 10 07:01:29 dg1test kernel:  __lock_acquire+0x14e3/0x2240
Aug 10 07:01:29 dg1test kernel:  lock_acquire+0xc8/0x2a0
Aug 10 07:01:29 dg1test kernel:  ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel:  ? lock_acquire+0xc8/0x2a0
Aug 10 07:01:29 dg1test kernel:  _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel:  ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel:  nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel:  nvkm_client_event+0xf/0x20 [nouveau]
Aug 10 07:01:29 dg1test kernel:  nvkm_event_ntfy+0x9b/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel:  ga100_fifo_nonstall_intr+0x24/0x30 [nouveau]
Aug 10 07:01:29 dg1test kernel:  nvkm_intr+0x12c/0x240 [nouveau]
Aug 10 07:01:29 dg1test kernel:  __handle_irq_event_percpu+0x88/0x240
Aug 10 07:01:29 dg1test kernel:  handle_irq_event+0x38/0x80
Aug 10 07:01:29 dg1test kernel:  handle_edge_irq+0xa3/0x240
Aug 10 07:01:29 dg1test kernel:  __common_interrupt+0x72/0x160
Aug 10 07:01:29 dg1test kernel:  common_interrupt+0x60/0xe0
Aug 10 07:01:29 dg1test kernel:  asm_common_interrupt+0x26/0x40
Aug 10 07:01:29 dg1test kernel: RIP: 0033:0x7fb66174d700
Aug 10 07:01:29 dg1test kernel: Code: c1 e2 05 29 ca 8d 0c 10 0f be 07 84 c0 75 eb 89 c8 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa e9 d7 0f fc ff 0f 1f 80 00 00 00 00 <f3> 0f 1e fa e9 c7 0f fc>
Aug 10 07:01:29 dg1test kernel: RSP: 002b:00007ffdd3c48438 EFLAGS: 00000206
Aug 10 07:01:29 dg1test kernel: RAX: 000055bb758763c0 RBX: 000055bb758752c0 RCX: 00000000000028b0
Aug 10 07:01:29 dg1test kernel: RDX: 000055bb758752c0 RSI: 000055bb75887490 RDI: 000055bb75862950
Aug 10 07:01:29 dg1test kernel: RBP: 00007ffdd3c48490 R08: 000055bb75873b10 R09: 0000000000000001
Aug 10 07:01:29 dg1test kernel: R10: 0000000000000004 R11: 000055bb7587f000 R12: 000055bb75887490
Aug 10 07:01:29 dg1test kernel: R13: 000055bb757f6280 R14: 000055bb758875c0 R15: 000055bb757f6280
Aug 10 07:01:29 dg1test kernel:  </TASK>

Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107053255.2257079-1-airlied@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test

[ Upstream commit 28628fa952fefc7f2072ce6e8016968cc452b1ba ]

Linkui Xiao reported that there's a race condition when ipset swap and destroy is
called, which can lead to crash in add/del/test element operations. Swap then
destroy are usual operations to replace a set with another one in a production
system. The issue can in some cases be reproduced with the script:

ipset create hash_ip1 hash:net family inet hashsize 1024 maxelem 1048576
ipset add hash_ip1 172.20.0.0/16
ipset add hash_ip1 192.168.0.0/16
iptables -A INPUT -m set --match-set hash_ip1 src -j ACCEPT
while [ 1 ]
do
# ... Ongoing traffic...
        ipset create hash_ip2 hash:net family inet hashsize 1024 maxelem 1048576
        ipset add hash_ip2 172.20.0.0/16
        ipset swap hash_ip1 hash_ip2
        ipset destroy hash_ip2
        sleep 0.05
done

In the race case the possible order of the operations are

CPU0 CPU1
ip_set_test
ipset swap hash_ip1 hash_ip2
ipset destroy hash_ip2
hash_net_kadt

Swap replaces hash_ip1 with hash_ip2 and then destroy removes hash_ip2 which
is the original hash_ip1. ip_set_test was called on hash_ip1 and because destroy
removed it, hash_net_kadt crashes.

The fix is to force ip_set_swap() to wait for all readers to finish accessing the
old set pointers by calling synchronize_rcu().

The first version of the patch was written by Linkui Xiao <xiaolinkui@kylinos.cn>.

v2: synchronize_rcu() is moved into ip_set_swap() in order not to burden
    ip_set_destroy() unnecessarily when all sets are destroyed.
v3: Florian Westphal pointed out that all netfilter hooks run with rcu_read_lock() held
    and em_ipset.c wraps the entire ip_set_test() in rcu read lock/unlock pair.
    So there's no need to extend the rcu read locked area in ipset itself.

Closes: https://lore.kernel.org/all/69e7963b-e7f8-3ad0-210-7b86eebf7f78@netfilter.org/
Reported by: Linkui Xiao <xiaolinkui@kylinos.cn>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: ocores: Move system PM hooks to the NOIRQ phase

[ Upstream commit 382561d16854a747e6df71034da08d20d6013dfe ]

When an I2C device contains a wake IRQ subordinate to a regmap-irq chip,
the regmap-irq code must be able to perform I2C transactions during
suspend_device_irqs() and resume_device_irqs(). Therefore, the bus must
be suspended/resumed during the NOIRQ phase.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: designware: Fix corrupted memory seen in the ISR

[ Upstream commit f726eaa787e9f9bc858c902d18a09af6bcbfcdaf ]

When running on a many core ARM64 server, errors were
happening in the ISR that looked like corrupted memory. These
corruptions would fix themselves if small delays were inserted
in the ISR. Errors reported by the driver included "i2c_designware
APMC0D0F:00: i2c_dw_xfer_msg: invalid target address" and
"i2c_designware APMC0D0F:00:controller timed out" during
in-band IPMI SSIF stress tests.

The problem was determined to be memory writes in the driver were not
becoming visible to all cores when execution rapidly shifted between
cores, like when a register write immediately triggers an ISR.
Processors with weak memory ordering, like ARM64, make no
guarantees about the order normal memory writes become globally
visible, unless barrier instructions are used to control ordering.

To solve this, regmap accessor functions configured by this driver
were changed to use non-relaxed forms of the low-level register
access functions, which include a barrier on platforms that require
it. This assures memory writes before a controller register access are
visible to all cores. The community concluded defaulting to correct
operation outweighed defaulting to the small performance gains from
using relaxed access functions. Being a low speed device added weight to
this choice of default register access behavior.

Signed-off-by: Jan Bottorff <janb@os.amperecomputing.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hrtimers: Push pending hrtimers away from outgoing CPU earlier

[ Upstream commit 5c0930ccaad5a74d74e8b18b648c5eb21ed2fe94 ]

2b8272ff4a70 ("cpu/hotplug: Prevent self deadlock on CPU hot-unplug")
solved the straight forward CPU hotplug deadlock vs. the scheduler
bandwidth timer. Yu discovered a more involved variant where a task which
has a bandwidth timer started on the outgoing CPU holds a lock and then
gets throttled. If the lock required by one of the CPU hotplug callbacks
the hotplug operation deadlocks because the unthrottling timer event is not
handled on the dying CPU and can only be recovered once the control CPU
reaches the hotplug state which pulls the pending hrtimers from the dead
CPU.

Solve this by pushing the hrtimers away from the dying CPU in the dying
callbacks. Nothing can queue a hrtimer on the dying CPU at that point because
all other CPUs spin in stop_machine() with interrupts disabled and once the
operation is finished the CPU is marked offline.

Reported-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Liu Tie <liutie4@huawei.com>
Link: https://lore.kernel.org/r/87a5rphara.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: sd: Fix sshdr use in sd_suspend_common()

[ Upstream commit 3b83486399a6a9feb9c681b74c21a227d48d7020 ]

If scsi_execute_cmd() returns < 0, it doesn't initialize the sshdr, so we
shouldn't access the sshdr. If it returns 0, then the cmd executed
successfully, so there is no need to check the sshdr. sd_sync_cache() will
only access the sshdr if it's been setup because it calls
scsi_status_is_check_condition() before accessing it. However, the
sd_sync_cache() caller, sd_suspend_common(), does not check.

sd_suspend_common() is only checking for ILLEGAL_REQUEST which it's using
to determine if the command is supported. If it's not it just ignores the
error. So to fix its sshdr use this patch just moves that check to
sd_sync_cache() where it converts ILLEGAL_REQUEST to success/0.
sd_suspend_common() was ignoring that error and sd_shutdown() doesn't check
for errors so there will be no behavior changes.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20231106231304.5694-2-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa/mlx5: preserve CVQ vringh index

[ Upstream commit 480b3e73720f6b5d76bef2387b1f9d19ed67573b ]

mlx5_vdpa does not preserve userland's view of vring base for the control
queue in the following sequence:

ioctl VHOST_SET_VRING_BASE
ioctl VHOST_VDPA_SET_STATUS VIRTIO_CONFIG_S_DRIVER_OK
  mlx5_vdpa_set_status()
    setup_cvq_vring()
      vringh_init_iotlb()
        vringh_init_kern()
          vrh->last_avail_idx = 0;
ioctl VHOST_GET_VRING_BASE

To fix, restore the value of cvq->vring.last_avail_idx after calling
vringh_init_iotlb.

Fixes: 5262912ef3cf ("vdpa/mlx5: Add support for control VQ and MAC setting")

Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1699014387-194368-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 6.6.6

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "wifi: cfg80211: fix CQM for non-range use"

This reverts commit 4a7e92551618f3737b305f62451353ee05662f57 which is
commit 7e7efdda6adb385fbdfd6f819d76bc68c923c394 upstream.

It needed to have commit 076fc8775daf ("wifi: cfg80211: remove wdev
mutex") applied to properly work, otherwise regressions happen.

Link: https://lore.kernel.org/r/e374bb16-5b13-44cc-b11a-2f4eefb1ecf5@manjaro.org
Link: https://lore.kernel.org/r/87sf4belmm.fsf@turtle.gmx.de
Link: https://lore.kernel.org/r/20231210213930.61378-1-leo@leolam.fr
Reported-by: Léo Lam <leo@leolam.fr>
Reported-by: Sven Joachim <svenjoac@gmx.de>
Reported-by: Philip Müller <philm@manjaro.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>