Mauro Carvalho Chehab [Sat, 29 Aug 2009 18:19:31 +0000 (15:19 -0300)]
V4L/DVB (12598): dvb-usb: store rc5 custom and data at the same field
In order to be closer to V4L IR implementation, it is needed to replace
u8 custom, data
to:
u16 scan
This allows using non-rc5 mappings, like the 8 bit keycodes used on older
protocols. It will also allow future implementations of rc6 keystrokes
when needed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 29 Aug 2009 17:15:55 +0000 (14:15 -0300)]
V4L/DVB (12595): common/ir: use a struct for keycode tables
Currently, V4L uses a scancode table whose index is the scancode and
the value is the keycode. While this works, it has some drawbacks:
1) It requires that the scancode to be at the range 00-7f;
2) keycodes should be masked on 7 bits in order for it to work;
3) due to the 7 bits approach, sometimes it is not possible to replace
the default keyboard to another one with a different encoding rule;
4) it is different than what is done with dvb-usb approach;
5) it requires a typedef for it to work. This is not a recommended
Linux CodingStyle.
This patch is part of a larger series of IR changes. It basically
replaces the IR_KEYTAB_TYPE tables by a structured table:
struct ir_scancode {
u16 scancode;
u32 keycode;
};
This is very close to what dvb does. So, a further integration with DVB
code will be easy.
While we've changed the tables, for now, the IR keycode handling is still
based on the old approach.
The only notable effect is the redution of about 35% of the ir-common
module size:
text data bss dec hex filename
6721 29208 4 35933 8c5d old/ir-common.ko
5756 18040 4 23800 5cf8 new/ir-common.ko
In thesis, we could be using above u8 for scancode, reducing even more the size
of the module, but defining it as u16 is more convenient, since, on dvb, each
scancode has up to 16 bits, and we currently have a few troubles with rc5, as their
scancodes are defined with more than 8 bits.
This patch itself shouldn't be doing any functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Tue, 25 Aug 2009 09:14:54 +0000 (06:14 -0300)]
V4L/DVB (12501): gspca - sonixj: Do the ov7660 sensor work again.
- bad sensor power
- bad edge gain/threshold
- set back the auto gain
- light frequency filter inverted
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Aug 2009 13:14:45 +0000 (10:14 -0300)]
V4L/DVB (12469): fix bad whitespaces at cx88_geniatech_x8000_mt
It were using 7 spaces instead of tab for indent.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 30 Aug 2009 16:05:56 +0000 (13:05 -0300)]
V4L/DVB (12591): em28xx: Add entry for GADMEI UTV330+ and related IR keymap
[mchehab@redhat.com: Fix a few wrong IR keymaps]
Signed-off-by: Shine Liu <shinel@foxmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Eugene Yudin [Sat, 29 Aug 2009 12:32:11 +0000 (09:32 -0300)]
V4L/DVB (12589): Add support for RoverMedia TV Link Pro FM
This patch add support for RoverMedia TV Link Pro FM (LR138 REV:I) card
based on saa7134.
Signed-off-by: Eugene Yudin <Eugene.Yudin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dmitri Belimov [Wed, 26 Aug 2009 04:01:12 +0000 (01:01 -0300)]
V4L/DVB (12587): Add support BeholdTV X7 card
Add support our new TV card based on xc5000 and saa7134.
Analog TV works well.
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oldřich Jedlička [Sat, 22 Aug 2009 18:13:51 +0000 (15:13 -0300)]
V4L/DVB (12586): Update ALSA capture controls according to selected source.
The patch introduces new snd_saa7134_capsrc_set (code taken from
snd_saa7134_capsrc_put) that updates also the ALSA capture controls during
snd_card_saa7134_capture_prepare and snd_saa7134_capsrc_put.
There can be much more work done in order to unify the control of the card
(now the card's capture source is tuned/switched in saa7134-video.c too), but
I don't have enough time. This work could be a starting point, but it can be
applied as-is too (it doesn't need any further work to make it working).
Signed-off-by: Oldřich Jedlička <oldium.pro@seznam.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 22 Aug 2009 17:43:50 +0000 (14:43 -0300)]
V4L/DVB (12585): Add remote support to cph03x bttv card
Hello kernel developers.
I found a bug report from an user in launchpad. I just copy it here. It
includes patch.
I don't own the necessary hardware to test it but the patch looks
trivial.
I'm not subscribed to this list, so please CC me. Thanks!
Here is the text:
"""
remote control for my tv card doesnt work
I have Askey CPH03x TV Capturer.
When I load bttv module with "card=59" option which is proper for this
tv card,
I can watch tv with sound but my remote control doesnt work. There is no
ir
event in /proc/bus/input/device .
When bttv module is loaded with "card=137" option remote control works
very
well.
$ cat /proc/bus/input/devices
.......
........
: Bus=0001 Vendor=109e Product=0350 Version=0001
N: Name="bttv IR (card=137)"
P: Phys=pci-0000:00:0d.0/ir0
S: Sysfs=/devices/pci0000:00/0000:00:0d.0/input/input144
U: Uniq=
H: Handlers=kbd event6
B: EV=100003
B: KEY=2c0814 100004 0 0 0 4 2008000 2090 2001 1e0000 4400 0 ffc
Unfortunately there is no sound.
"""
https://bugs.launchpad.net/ubuntu/+bug/239733
http://bugzilla.kernel.org/show_bug.cgi?id=11995
--
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
James A Webb [Tue, 4 Aug 2009 05:38:05 +0000 (02:38 -0300)]
V4L/DVB (12584): Support for Kaiser Baas ExpressCard Dual HD Tuner
The card is reported as YUAN High-Tech Development Co., Ltd STK7700D
[mchehab@redhat.com: fix merge conflicts and properly name USB PID]
Cc: Patrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: James A Webb <jamesawebb@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Richter [Sat, 1 Aug 2009 11:05:16 +0000 (08:05 -0300)]
V4L/DVB (12583): firedtv: combine some debug logging code
Shrinks source and kernel object size a bit.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Henrik Kurelid [Sat, 1 Aug 2009 11:04:06 +0000 (08:04 -0300)]
V4L/DVB (12582): The current AVC debugging can clog the log down a lot since many
applications tend to check the signal strength very often. This patch
enables users to select which AVC messages to log using a bitmask. In
addition, it also enables the possibility to debug application PMTs sent
to the driver. This will be usable since the CA support is still poorly
tested for lots of CAMs and CA systems.
Signed-off-by: Henrik Kurelid <henrik@kurelid.se>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Thu, 27 Aug 2009 19:58:06 +0000 (16:58 -0300)]
V4L/DVB (12578): tda18271: allow drivers to request RF tracking filter calibration during attach
On certain master / slave dual tuner configurations, tuning performance
improves when the RF tracking filter calibration is performed sequentially.
This patch allows for the bridge driver to specify this behavior in the
configuration structure at attach-time.
The "cal" module option will continue to override this attach-time
configuration: set cal=0 to prevent RF tracking filter calibration
on startup, and set cal=1 to force it.
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Reviewed-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Thu, 27 Aug 2009 01:43:16 +0000 (22:43 -0300)]
V4L/DVB (12577): tda18271: remove excess whitespace from tda_foo printk macros
remove excess spacing from the tda_foo printk macros & line things up better
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Thu, 27 Aug 2009 01:43:16 +0000 (22:43 -0300)]
V4L/DVB (12576): tda18271: simplify debug printk macros
Rename dprintk to tda_dprintk to be consistent with the other tda_foo macros.
Move KERN_DEBUG facility level to tda_dprintk.
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Roel Kluin [Thu, 27 Aug 2009 01:13:43 +0000 (22:13 -0300)]
V4L/DVB (12575): Fix test of bandwidth range in cx22700_set_tps()
For the bandwidth to be less than 8 MHZ and greater than 6 MHZ is logically
impossible.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Vasiliy Temnikov [Thu, 27 Aug 2009 01:10:55 +0000 (22:10 -0300)]
V4L/DVB (12574): support AverMedia Studio 505
Added support to AverMedia Studio 505
[dougsland@redhat.com: fixed rejects and removed the change to add dk as default secam variant]
[mchehab@redhat.com: fix a few CodingStyle issues]
Signed-off-by: Vasiliy Temnikov <vaka@newmail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dmitri Belimov [Thu, 27 Aug 2009 01:06:28 +0000 (22:06 -0300)]
V4L/DVB (12573): FM1216MK5 FM radio
Implement Philips FM1216MK5.
1. Implement get_stereo function.
2. Add correct data byte for FM radio mode
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 29 Aug 2009 12:48:21 +0000 (09:48 -0300)]
V4L/DVB (12567): ir-keymaps: use KEY_CAMERA for snapshots
KEY_CAMERA is already used for a long time with webcam drivers to take a picture.
On other media drivers, due to the lack of a snapshot button, random KEY codes
were sent, being KEY_SHUFFLE the most used one, probably due to cut-and-paste
from other remotes, since one of them uses the same key for snapshot and shuffle.
The better is to use KEY_CAMERA on all drivers solving this issue. This
follows the IR standard map as defined at:
http://linuxtv.org/wiki/index.php/Remote_Controllers
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 29 Aug 2009 12:37:00 +0000 (09:37 -0300)]
V4L/DVB (12566): ir-keymaps: Fix IR mappings for channel and volume +/- keys
Use standard definitions for channel controls, as defined at:
http://linuxtv.org/wiki/index.php/Remote_Controllers
While here, fix a few broken up/down/left/right mappings
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 29 Aug 2009 12:06:07 +0000 (09:06 -0300)]
V4L/DVB (12565): ir-keymaps: standardize timeshift key
Each remote were using a different keycode for timeshift. Use the same
keycode for all of them, using the map as defined at:
http://linuxtv.org/wiki/index.php/Remote_Controllers
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 29 Aug 2009 12:01:54 +0000 (09:01 -0300)]
V4L/DVB (12564): ir-keymaps: Replace most KEY_[A-Z] to the proper definitions
There are several IR's that were using IR to type a letter that it is
known by some random application. Instead, the better is to use
the standard definitions found at:
http://linuxtv.org/wiki/index.php/Remote_Controllers
And, if needed, submit a patch for the application to understand the
media keys.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 29 Aug 2009 11:43:20 +0000 (08:43 -0300)]
V4L/DVB (12563): ir-keymaps: add a link to the IR standard layout page
While we're still discussing it, let's point to the wiki page. In
the future, this should be added at V4L2 API spec DocBooks.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 29 Aug 2009 11:37:58 +0000 (08:37 -0300)]
V4L/DVB (12562): ir-keymaps: replace KEY_KP[0-9] to KEY_[0-9]
This is needed to match the standard mapping defined at:
http://linuxtv.org/wiki/index.php/Remote_Controllers#Remote_Controllers
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 27 Aug 2009 12:54:44 +0000 (09:54 -0300)]
V4L/DVB (12560): Fix a number of EXPORT_SYMBOL warnings
Make Checkpatch tool happy:
-:2349: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
On all cases, it were just a blank line at the wrong place. Yet, fixing it is trivial
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 27 Aug 2009 12:50:21 +0000 (09:50 -0300)]
V4L/DVB (12559): Properly indent comments with tabs
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 27 Aug 2009 12:31:30 +0000 (09:31 -0300)]
V4L/DVB (12558): CodingStyle: Use [0x0f] instead of [ 0x0f ]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 27 Aug 2009 12:28:48 +0000 (09:28 -0300)]
V4L/DVB (12557): Use C99 comment CodingStyle
The ir-keymaps.c has frequent additions. As people tend to copy an old
keyboard entry, a bad CodingStyle at an ancient entry may result on a
freshly bad CodingStyle patch.
So, better to fix the CodingStyle for the entire file.
This patch is the first of a series of patches fixing it, generated by
some perl magic plus manual handling.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Eduardo Valentin [Sat, 8 Aug 2009 12:01:34 +0000 (09:01 -0300)]
V4L/DVB (12554): FM TX: si4713: Add document file
This patch adds a document file for si4713 device driver.
It describes the driver interfaces and organization.
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 8 Aug 2009 12:00:37 +0000 (09:00 -0300)]
V4L/DVB (12553): FM TX: si4713: Add Kconfig and Makefile entries
Simply add Makefile and Kconfig entries.
[hverkuil@xs4all.nl: auto-select I2C_SI4713]
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Eduardo Valentin [Sat, 8 Aug 2009 11:46:53 +0000 (08:46 -0300)]
V4L/DVB (12552): FM TX: si4713: Add files to handle si4713 i2c device
This patch adds files to control si4713 devices.
Internal functions to control device properties
and initialization procedures are into these files.
Also, a v4l2 subdev interface is also exported.
This way other drivers can use this as v4l2 i2c subdevice.
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Eduardo Valentin [Sat, 8 Aug 2009 11:45:49 +0000 (08:45 -0300)]
V4L/DVB (12551): FM TX: si4713: Add files to add radio interface for si4713
This patch adds files which creates the radio interface
for si4713 FM transmitter (modulator) devices.
In order to do the real access to device registers, this
driver uses the v4l2 subdev interface exported by si4713 i2c driver.
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Eduardo Valentin [Tue, 11 Aug 2009 21:49:12 +0000 (18:49 -0300)]
V4L/DVB (12549): v4l2: video device: Add FM TX controls default configurations
This patch adds basic configurations for FM TX extended controls.
That includes controls names, menu strings, pointer identification,
type classification and flags configuration.
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Eduardo Valentin [Sat, 8 Aug 2009 11:38:58 +0000 (08:38 -0300)]
V4L/DVB (12548): v4l2: video device: Add V4L2_CTRL_CLASS_FM_TX controls
This patch adds a new class of extended controls. This class
is intended to support FM Radio Modulators properties such as:
rds, audio limiters, audio compression, pilot tone generation,
tuning power levels and preemphasis properties.
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Eduardo Valentin [Sat, 8 Aug 2009 11:34:18 +0000 (08:34 -0300)]
V4L/DVB (12547): v4l2-subdev.h: Add g/s_modulator callbacks to subdev api
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 11 Aug 2009 21:47:18 +0000 (18:47 -0300)]
V4L/DVB (12543): v4l: introduce string control support.
The upcoming RDS encoder needs support for string controls. This patch
implements the core implementation.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
hermann pitton [Thu, 20 Aug 2009 01:30:58 +0000 (22:30 -0300)]
V4L/DVB (12492): saa7134-input: don't probe for the Pinnacle remotes anymore
With the recent improvements we don't need to probe anymore, if we know
the i2c address of the receiver.
The address of the receiver for the remote with the gray buttons is not
confirmed anywhere, but it is very unlikely to see it on something else.
We want to have that information anyway.
BTW, those remaining still probing, please join.
Signed-off-by: hermann pitton <hermann-pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Neukum [Wed, 19 Aug 2009 19:41:59 +0000 (16:41 -0300)]
V4L/DVB (12491): remove unnecessary power management primitive in stk-webcam
This patch removes an unneeded power management primitive.
Power management is automatically enabled as probe ends.
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oldřich Jedlička [Tue, 18 Aug 2009 19:24:54 +0000 (16:24 -0300)]
V4L/DVB (12490): Report only 32kHz for ALSA
There are several reasons:
- SAA7133/35 uses DDEP (DemDec Easy Programming mode), which works in 32kHz
only
- SAA7134 for TV mode uses DemDec mode (32kHz)
- Radio works in 32kHz only
- When recording 48kHz from Line1/Line2, switching of capture source to TV
means switching to 32kHz without any frequency translation
Signed-off-by: Oldřich Jedlička <oldium.pro@seznam.cz>
Acked-by: hermann pitton <hermann-pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dmitry Torokhov [Fri, 14 Aug 2009 05:22:52 +0000 (02:22 -0300)]
V4L/DVB (12489): pwc - fix few use-after-free and memory leaks
I just happen to peek inside the PWC driver and did not like what I saw
there. Please consider applying the patch below.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dmitri Belimov [Tue, 11 Aug 2009 00:47:29 +0000 (21:47 -0300)]
V4L/DVB (12488): Add RDS config for BeholdTV cards
Add config of RDS part for the BeholdTV tuners.
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dmitri Belimov [Mon, 10 Aug 2009 07:48:16 +0000 (04:48 -0300)]
V4L/DVB (12487): Fix control AC-3 of the 6752HS
Fix error for AC-3 control of the 6752HS MPEG-2 coder.
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Igor M. Liplianin [Wed, 29 Jul 2009 22:18:28 +0000 (19:18 -0300)]
V4L/DVB (12486): cx88: fix TBS 8920 card support
It does matter to set explicitly gpio0 value in
cx88_board structure for TBS 8920 card.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Aleksandr V. Piskunov [Sun, 2 Aug 2009 19:01:19 +0000 (16:01 -0300)]
V4L/DVB (12485): zl10353: correct implementation of FE_READ_UNCORRECTED_BLOCKS
Makes zl10353 a bit more DVB API compliant:
FE_READ_UNCORRECTED_BLOCKS - keep a counter of UNC blocks
FE_GET_FRONTEND - return last set frequency instead of zero
Signed-off-by: Aleksandr V. Piskunov <alexandr.v.piskunov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Julia Lawall [Sat, 1 Aug 2009 19:48:41 +0000 (16:48 -0300)]
V4L/DVB (12483): Use DIV_ROUND_CLOSEST
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@haskernel@
@@
@depends on haskernel@
expression x,__divisor;
@@
- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Henrik Kurelid [Sat, 1 Aug 2009 11:02:38 +0000 (08:02 -0300)]
V4L/DVB (12482): firedtv: add PID filtering for SW zigzag retune
The AVC protocol uses the same command for tuning and PID filtering and
since dvb-core uses a software zigzagging to do automatic retuning this
could cause all PID filters to be cleared. PID filter information is
now included in all DSD commands to the card.
Background:
There is a problem in the firedtv driver that causes recordings to stop
if the SW zigzag algorithm in dvb-core kicks in with a retune after the
application has set up the PID filters. Since tuning and setting PID
filters uses the same AVC command (DSD) and only the replace subfunction
is supported by the card, it is not possible to do a retune without
setting the PID filters. This means that the PID filtering has to be
sent in each tune.
This problem applies to C and T cards since S and S2 cards tune using a
vendor specific command. The patch corrects the problem by sending the
PID list in each tune. I have tested it on my T card with a good
result.
How to trigger problem: Zap to a channel and output AV to a file, e.g.
"tzap -c channels.conf SVT1 -r -o SVT1.ts". After a short while, pull
the antenna cable from the card. The lock on the channel will disappear
and the TS file will stop increasing in size. Wait a couple of seconds.
Replug the cable again. You will get a lock on the channel again, but
the TS file will never increase in size agains sinze no PIDS are
filtered.
Tested with kaffeine with DVB-T and DVB-C: Fixes retuning after antenna
was plugged out and back in with DVB-T. Does not fix this with DVB-C,
but also doesn't regress on DVB-C.
Signed-off-by: Henrik Kurelid <henrik@kurelid.se>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Julian Scheel [Fri, 31 Jul 2009 16:40:43 +0000 (13:40 -0300)]
V4L/DVB (12481): Fix lowband tuning with tda8261
Attached is a patch which fixes tuning to low frequency channels with
stb0899+tda8261 cards like the KNC TV-Station DVB-S2.
The cause of the issue was a broken if construct, which should have been
an if/else if, so that the setting for the lowest matching frequency is
applied.
Without this patch for example tuning to "arte" on Astra 19.2, 10744MHz
SR22000 failed most times and when it failed the communication between
driver and tda8261 was completely broken.
This problem disappears with the attached patch.
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mart Raudsepp [Fri, 24 Jul 2009 16:45:41 +0000 (13:45 -0300)]
V4L/DVB: af9015: add new USB ID for KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)
Add new USB ID (1b80:e400) for KWorld PlusTV Dual DVB-T Stick (DVB-T 399U).
The model number on the devices sticker label is "KW-DVB-T 399UR".
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 22 Jul 2009 03:02:29 +0000 (00:02 -0300)]
V4L/DVB (12478): ARRAY_SIZE changes
These changes were a direct result of using a semantic patch
More information can be found at http://www.emn.fr/x-info/coccinelle/
[mchehab@redhat.com: fix a merge conflict]
Signed-off-by: Stoyan Gaydarov <sgayda2@uiuc.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Julia Lawall [Tue, 21 Jul 2009 16:47:46 +0000 (13:47 -0300)]
V4L/DVB (12477): Use dst_type field instead of type_flags
It seems from other code that it is the dst_type field rather than the
type_flags field that contains values of the form DST_TYPE_IS...
The type_flags field contains values of the form DST_TYPE_HAS...
The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@ struct dst_state E; @@
(
*E.type_flags ==
\( DST_TYPE_IS_SAT\|DST_TYPE_IS_TERR\|DST_TYPE_IS_CABLE\|DST_TYPE_IS_ATSC \)
|
*E.type_flags !=
\( DST_TYPE_IS_SAT\|DST_TYPE_IS_TERR\|DST_TYPE_IS_CABLE\|DST_TYPE_IS_ATSC \)
)
// </smpl>
Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Nam Phạm Thành [Sun, 12 Jul 2009 14:51:10 +0000 (11:51 -0300)]
V4L/DVB (12475): Add support for Humax/Coex DVB-T USB Stick 2.0 High Speed
This patch adds support for Humax/Coex DVB-T USB Stick 2.0 High Speed
which is a very popular tuner sold in Vietnam.
Tested with at least 3 tuners.
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Pham Thanh Nam <phamthanhnam.ptn@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Aug 2009 13:20:06 +0000 (10:20 -0300)]
V4L/DVB (12472): hdpvr-control: fix bad whitespaces
It were using 7 spaces instead of tab for indent.
Cc: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Aug 2009 13:18:29 +0000 (10:18 -0300)]
V4L/DVB (12471): stv06xx: fix bad whitespaces
It were using 7 spaces instead of tab for indent.
Cc: Erik Andren <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Aug 2009 13:15:48 +0000 (10:15 -0300)]
V4L/DVB (12470): cx231xx/cx231xx-conf-reg.h: fix bad whitespaces
It were using 7 spaces instead of tab for indent.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Aug 2009 13:13:40 +0000 (10:13 -0300)]
V4L/DVB (12468): saa7134: Fix bad whitespacing
The changeset
0b17d0ed that aded ASUSTeK P7131 Analog were using
7 spaces instead of tab, probably due to some bad cut-and-paste.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 20 Aug 2009 12:38:44 +0000 (09:38 -0300)]
V4L/DVB (12466): Kconfig files: Fix improper use of whitespaces
On VIDEO_M52790 and USB_GSPCA_SN9C20X, instead of tab, it were
using 7 whitespaces at the beginning, probably due to some
cut-and-paste trouble.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andrzej Hajda [Thu, 2 Jul 2009 14:50:35 +0000 (11:50 -0300)]
V4L/DVB (12465): cx88: High resolution timer for Remote Controls
Patch solves problem of missed keystrokes on some remote controls,
as reported on http://bugzilla.kernel.org/show_bug.cgi?id=9637 .
Signed-off-by: Andrzej Hajda <andrzej.hajda@wp.pl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Igor M. Liplianin [Fri, 14 Aug 2009 00:42:21 +0000 (21:42 -0300)]
V4L/DVB (12463): Add support for Compro VideoMate S350 DVB-S PCI card.
Add Compro VideoMate S350 DVB-S driver.
The card uses zl10313, zl10039, saa7130 integrated circuits.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Igor M. Liplianin [Sat, 20 Jun 2009 12:54:18 +0000 (09:54 -0300)]
V4L/DVB (12462): Add TeVii S630 USB DVB-S card support.
The card includes Intel ce5039(Zarlink zl10039) tuner
and Intel ce6313 (Zarlink zl10313) demod.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Igor M. Liplianin [Sat, 20 Jun 2009 12:51:48 +0000 (09:51 -0300)]
V4L/DVB (12461): Add ce5039(zl10039) tuner support.
The code from Jan D. Louw with some minor changes.
http://article.gmane.org/gmane.linux.drivers.dvb/38163
Tested with TeVii S630 DVB-S USB card by me (Igor)
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Theodore Kilgore [Mon, 3 Aug 2009 07:13:23 +0000 (04:13 -0300)]
V4L/DVB (12459): gspca - jeilinj: New subdriver for Jeilin chip.
Signed-off-by: Theodore Kilgore <kilgota@auburn.edu>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 12 Aug 2009 13:10:20 +0000 (10:10 -0300)]
V4L/DVB (12455): radio-typhoon: remove obsolete RADIO_TYPHOON_PROC_FS config option
Thanks to Robert P.J. Day for finding this.
Thanks-to: Robert P.J. Day <rpjday@crashcourse.ca>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 14 Aug 2009 04:45:57 +0000 (01:45 -0300)]
V4L/DVB (12452): gspca/Kconfig: Fix bad identation for USB_GSPCA_SN9C20X_EVDEV
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Tue, 4 Aug 2009 02:56:51 +0000 (23:56 -0300)]
V4L/DVB (12444): em28xx: add support for Terratec Cinergy Hybrid T USB XS remote control
Add support for the remote control that comes with the Cinergy Hybrid T USB XS
Thanks to Jelle de Jong for providing sample hardware to test with.
Cc: Jelle de Jong <jelledejong@powercraft.nl>
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Vlastimil Labsky [Tue, 11 Aug 2009 01:15:54 +0000 (22:15 -0300)]
V4L/DVB (12439): cx88: add support for WinFast DTV2000H rev. J
I updated and simplyfied patch from Zbynek Hrabovsky for recent kernel.
It enables autodetection of card, sound in analog TV , sound in FM radio
and switching between antenna and cable RF input. Radio tuner still
doesn't work, I don't even know how it works. Some guys wrote me that FM
radio works with TV tuner used instead of radio part (symlink video0 ->
radio0).
Cc: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Vlastimil Labsky <vlasta.labsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Roel Kluin [Sat, 8 Aug 2009 15:58:52 +0000 (12:58 -0300)]
V4L/DVB (12435): strlcpy() will always null terminate the string.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Douglas Schilling Landgraf [Thu, 6 Aug 2009 15:52:11 +0000 (12:52 -0300)]
V4L/DVB (12434): em28xx: fix empire auto-detect
Fixed eeprom hash table
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 7 Aug 2009 08:50:02 +0000 (05:50 -0300)]
V4L/DVB (12427): cx24113: fix mips compiler warning
do_div requires an u64 as the first argument, not a s64.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 7 Aug 2009 08:32:20 +0000 (05:32 -0300)]
V4L/DVB (12426): pvrusb2: fix compile warning
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
David T.L. Wong [Wed, 5 Aug 2009 16:07:10 +0000 (13:07 -0300)]
V4L/DVB (12423): cxusb, d680 dmbth use unified lgs8gxx code instead of lgs8gl5
Use unified lgs8gxx frontend instead of reverse engineered lgs8gl5 frontend.
After this patch, lgs8gl5 frontend could be mark as deprecated.
Future development should base on unified lgs8gxx frontend.
Signed-off-by: David T.L. Wong <davidtlwong@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Julia Lawall [Wed, 5 Aug 2009 01:00:24 +0000 (22:00 -0300)]
V4L/DVB (12421): drivers/media/video/gspca: introduce missing kfree
Error handling code following a kmalloc should free the allocated data.
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
hermann pitton [Tue, 4 Aug 2009 23:11:43 +0000 (20:11 -0300)]
V4L/DVB (12420): saa7134: fix the radio on Avermedia GO 007 FM
We have support for radio on saa7133/35/31e cards with tda8290/8275(a)
and 5.5MHz ceramic filter on the bridge chips since a while.
It was previously not tested, if this card supports it too, but the old
"ghost" radio with wrong filters doesn't work anymore.
Thanks go to Pham Thanh Nam and Laszlo Kustan for reporting it working
on that input.
Signed-off-by: hermann pitton <hermann-pitton@arcor.de>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Beholder Intl. Ltd. Dmitry Belimov [Tue, 4 Aug 2009 23:07:42 +0000 (20:07 -0300)]
V4L/DVB (12419): Fix incorrect type of tuner for the BeholdTV H6 card
Define correct tuner in config. Radio now works fine
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tobias Lorenz [Mon, 10 Aug 2009 21:44:14 +0000 (18:44 -0300)]
V4L/DVB (12417): I2C cleanups and version checks
The structure and comments of the I2C part have been adopted to fit to the
USB part.
Some additional cleanups and precisements have been made to the version
detection and checking functionality to clearly separate HW/SW/FW version.
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Joonyoung Shim [Sun, 9 Aug 2009 17:23:35 +0000 (14:23 -0300)]
V4L/DVB (12416): radio-si470x: add i2c driver for si470x
This patch supports i2c interface of si470x. The i2c specific part
exists in radio-si470x-i2c.c file and the common part uses
radio-si470x-common.c file. The '#if defined' is inserted inevitably
because of parts used only si470x usb in the common file.
The current driver version doesn't support the RDS.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Joonyoung Shim [Sun, 9 Aug 2009 17:23:02 +0000 (14:23 -0300)]
V4L/DVB (12415): radio-si470x: add disconnect check function
The si470x_disconnect_check is function to check disconnect state of
radio in common file. The function is implemented in each interface
file.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Joonyoung Shim [Sun, 9 Aug 2009 17:22:41 +0000 (14:22 -0300)]
V4L/DVB (12414): radio-si470x: change to dev_* macro from printk
This patch is for using dev_* macro instead of printk.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Joonyoung Shim [Sun, 9 Aug 2009 17:22:20 +0000 (14:22 -0300)]
V4L/DVB (12413): radio-si470x: separate common and usb code
This patch is a preceding work to add the i2c interface of si470x.
The si470x directory includes a common file and usb specific file and
header file.
The part unrelated with usb interface and i2c interface exists in
radio-si470x-common.c file, and The usb specific part exists in
radio-si470x-usb.c file.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[tobias.lorenz@gmx.net: Small changes, due to new include "linux/smp_lock.h"]
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 9 Aug 2009 22:39:23 +0000 (19:39 -0300)]
V4L/DVB (12408): em28xx: Implement g/s_register via address match
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pete Hildebrandt [Wed, 5 Aug 2009 14:46:38 +0000 (11:46 -0300)]
V4L/DVB (12396): [patch] Added Support for STK7700D (DVB)
This patch adds support for the STK7700D USB-DVB-Device.
lsusb identifies it as:
idVendor 0x1164 YUAN High-Tech Development Co., Ltd
idProduct 0x1efc
iProduct 2 STK7700D
The device is build into a Samsung R55-T5500 notebook.
Signed-off-by: Pete Hildebrandt <send2ph@googlemail.com>
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Eberhard Mattes [Sun, 2 Aug 2009 18:44:37 +0000 (15:44 -0300)]
V4L/DVB (12388): dvb-usb: fix tuning with Cinergy T2
cinergyInitialize param.flags.
Signed-off-by: Eberhard Mattes <eberhard.mattes@web.de>
Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Sun, 2 Aug 2009 09:56:47 +0000 (06:56 -0300)]
V4L/DVB (12383): gspca - vc032x: Bad h/v flip controls when inverted by default.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Marton Nemeth [Wed, 29 Jul 2009 08:01:54 +0000 (05:01 -0300)]
V4L/DVB (12382): gspca - main: Remove vidioc_s_std().
The vidioc_s_std() is not necessary when vdev->tvnorms == 0.
Signed-off-by: Marton Nemeth <nm127@freemail.hu>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Wed, 1 Jul 2009 23:24:47 +0000 (20:24 -0300)]
V4L/DVB (12379): uvcvideo: Multiple streaming interfaces support
Restructure the UVC descriptors parsing code to handle multiple streaming
interfaces. The driver now creates a uvc_video_chain instance for each chain
detected in the UVC control interface descriptors, and tries to register one
video device per streaming endpoint.
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Sun, 28 Jun 2009 11:37:50 +0000 (08:37 -0300)]
V4L/DVB (12378): uvcvideo: Restructure the driver to support multiple simultaneous streams.
As a first step towards multiple streaming interfaces support, reorganize the
driver's data structures to cleanly separate video control and video streaming
data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 4 Aug 2009 22:52:37 +0000 (19:52 -0300)]
V4L/DVB (12376): em28xx: fix V4L2 API compliance: don't expose audio inputs for devices without it
V4L2 API (chapter 1.5) states that:
Drivers must implement all input ioctls when the device has one
or more inputs, all output ioctls when the device has one or more outputs.
When the device has any audio inputs or outputs the driver must set the
V4L2_CAP_AUDIO flag in the struct v4l2_capability returned by the
VIDIOC_QUERYCAP ioctl.
So, devices without audio input should return -EINVAL.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jiri Slaby [Thu, 30 Jul 2009 23:00:44 +0000 (20:00 -0300)]
V4L/DVB (12373): hdpvr: fix lock imbalances
There are many lock imbalances in this driver. Fix all found.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jiri Slaby [Tue, 28 Jul 2009 14:56:33 +0000 (11:56 -0300)]
V4L/DVB (12372): saa7134: fix lock imbalance
There seems to be one superfluos unlock in a poll function. Remove it.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mhayk Whandson [Tue, 28 Jul 2009 14:53:20 +0000 (11:53 -0300)]
V4L/DVB (12370): v4l doc: fix cqcam source code path
Fixed the c-qcam source code path in the linux kernel tree.
Signed-off-by: Mhayk Whandson <eu@mhayk.com.br>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Neukum [Tue, 28 Jul 2009 14:52:10 +0000 (11:52 -0300)]
V4L/DVB (12369): stv680: kfree called before usb_kill_urb
The irq handler will touch memory. Even in the error case some URBs may
complete. Thus no memory must be kfreed before all URBs are killed.
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Tue, 28 Jul 2009 14:50:14 +0000 (11:50 -0300)]
V4L/DVB (12368): ir-kbd-i2c: Add support for Z8F0811/Hauppage IR transceivers
This patch adds support for Zilog Z8F0811 IR transceiver chips on
CX2341[68] based boards to ir-kbd-i2c for both the old i2c binding model
and the new i2c binding model.
Signed-off-by: Andy Walls <awalls@radix.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Tue, 28 Jul 2009 14:48:18 +0000 (11:48 -0300)]
V4L/DVB (12367): cx18: Add i2c initialization for Z8F0811/Hauppage IR transceivers
This patch add support to the cx18 driver for setting up the
Z8F0811/Hauppauge IR Tx/Rx chip with the i2c binding model in newer
kernels.
Signed-off-by: Andy Walls <awalls@radix.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Tue, 28 Jul 2009 14:44:05 +0000 (11:44 -0300)]
V4L/DVB (12366): ir-kbd-i2c: Allow use of ir-kdb-i2c internal get_key funcs and set ir_type
This patch augments the init data passed by bridge drivers to
ir-kbd-i2c, so that the ir_type can be set explicitly, and so
ir-kbd-i2c internal get_key functions can be reused without
requiring symbols from ir-kbd-i2c in the bridge driver.
Signed-off-by: Andy Walls <awalls@radix.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean Delvare [Tue, 28 Jul 2009 14:41:35 +0000 (11:41 -0300)]
V4L/DVB (12365): ir-kbd-i2c: Remove superfulous inlines
Functions which are referenced by their address can't be inlined by
definition.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Mon, 27 Jul 2009 20:35:59 +0000 (17:35 -0300)]
V4L/DVB (12360): au0828: fix typo: dvb uses bulk xfer, dont say isoc in debug
The au0828-dvb driver uses bulk usb transfers for digital transport,
but the debug reports, "iso xfer already running!\n".
Fix this to report bulk instead of isoc.
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Tue, 28 Jul 2009 07:38:25 +0000 (04:38 -0300)]
V4L/DVB (12358): gspca - main: Memorize the current alt before setting it
This prevents a loop if a permanent error occurs in usb_set_interface().
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Tue, 28 Jul 2009 07:28:45 +0000 (04:28 -0300)]
V4L/DVB (12357): gspca - tv8532: Bad ISOC packet scan
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Denis Loginov [Tue, 28 Jul 2009 06:39:10 +0000 (03:39 -0300)]
V4L/DVB (12356): gspca - sonixj: Webcam 0c45:6148 added
Signed-off-by: Denis Loginov <dinvlad@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Mon, 27 Jul 2009 09:28:37 +0000 (06:28 -0300)]
V4L/DVB (12355): gspca - vc032x: Cleanup source
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Mon, 27 Jul 2009 09:00:03 +0000 (06:00 -0300)]
V4L/DVB (12354): gspca - vc032x: H and V flip controls added for mi13x0_soc sensors
Also, H/V flip default values adjusted according to the webcam IDs.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>