Vladimir Oltean [Sun, 11 Sep 2022 01:07:03 +0000 (04:07 +0300)]
net: dsa: propagate extack to port_lag_join
Drivers could refuse to offload a LAG configuration for a variety of
reasons, mainly having to do with its TX type. Additionally, since DSA
masters may now also be LAG interfaces, and this will translate into a
call to port_lag_join on the CPU ports, there may be extra restrictions
there. Propagate the netlink extack to this DSA method in order for
drivers to give a meaningful error message back to the user.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vladimir Oltean [Sun, 11 Sep 2022 01:07:02 +0000 (04:07 +0300)]
net: dsa: suppress device links to LAG DSA masters
These don't work (print a harmless error about the operation failing)
and make little sense to have anyway, because when a LAG DSA master goes
away, we will introduce logic to move our CPU port back to the first
physical DSA master. So suppress these device links in preparation for
adding support for LAG DSA masters.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vladimir Oltean [Sun, 11 Sep 2022 01:07:01 +0000 (04:07 +0300)]
net: dsa: suppress appending ethtool stats to LAG DSA masters
Similar to the discussion about tracking the admin/oper state of LAG DSA
masters, we have the problem here that struct dsa_port *cpu_dp caches a
single pair of orig_ethtool_ops and netdev_ops pointers.
So if we call dsa_master_setup(bond0, cpu_dp) where cpu_dp is also the
dev->dsa_ptr of one of the physical DSA masters, we'd effectively
overwrite what we cached from that physical netdev with what replaced
from the bonding interface.
We don't need DSA ethtool stats on the bonding interface when used as
DSA master, it's good enough to have them just on the physical DSA
masters, so suppress this logic.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vladimir Oltean [Sun, 11 Sep 2022 01:07:00 +0000 (04:07 +0300)]
net: dsa: don't keep track of admin/oper state on LAG DSA masters
We store information about the DSA master's state in
cpu_dp->master_admin_up and cpu_dp->master_oper_up, and this assumes a
bijective association between a CPU port and a DSA master.
However, when we have CPU ports in a LAG (and DSA masters in a LAG too),
the way in which we set up things is that the physical DSA masters still
have dev->dsa_ptr pointing to our cpu_dp, but the bonding/team device
itself also has its dev->dsa_ptr pointing towards one of the CPU port
structures (the first one).
So logically speaking, that first cpu_dp can't keep track of both the
physical master's admin/oper state, and of the bonding master's state.
This isn't even needed; the reason why we keep track of the DSA master's
state is to know when it is available for Ethernet-based register access.
For that use case, we don't even need LAG; we just need to decide upon
one of the physical DSA masters (if there is more than 1 available) and
use that.
This change suppresses dsa_tree_master_{admin,oper}_state_change() calls
on LAG DSA masters (which will be supported in a future change), to
allow the tracking of just physical DSA masters.
Link: https://lore.kernel.org/netdev/628cc94d.1c69fb81.15b0d.422d@mx.google.com/
Suggested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vladimir Oltean [Sun, 11 Sep 2022 01:06:59 +0000 (04:06 +0300)]
net: dsa: allow the DSA master to be seen and changed through rtnetlink
Some DSA switches have multiple CPU ports, which can be used to improve
CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(),
sets up only the first one, leading to suboptimal use of hardware.
The desire is to not change the default configuration but to permit the
user to create a dynamic mapping between individual user ports and the
CPU port that they are served by, configurable through rtnetlink. It is
also intended to permit load balancing between CPU ports, and in that
case, the foreseen model is for the DSA master to be a bonding interface
whose lowers are the physical DSA masters.
To that end, we create a struct rtnl_link_ops for DSA user ports with
the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that
contains the ifindex of the newly desired DSA master.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vladimir Oltean [Sun, 11 Sep 2022 01:06:58 +0000 (04:06 +0300)]
net: dsa: introduce dsa_port_get_master()
There is a desire to support for DSA masters in a LAG.
That configuration is intended to work by simply enslaving the master to
a bonding/team device. But the physical DSA master (the LAG slave) still
has a dev->dsa_ptr, and that cpu_dp still corresponds to the physical
CPU port.
However, we would like to be able to retrieve the LAG that's the upper
of the physical DSA master. In preparation for that, introduce a helper
called dsa_port_get_master() that replaces all occurrences of the
dp->cpu_dp->master pattern. The distinction between LAG and non-LAG will
be made later within the helper itself.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vladimir Oltean [Sun, 11 Sep 2022 01:06:57 +0000 (04:06 +0300)]
net: introduce iterators over synced hw addresses
Some network drivers use __dev_mc_sync()/__dev_uc_sync() and therefore
program the hardware only with addresses with a non-zero sync_cnt.
Some of the above drivers also need to save/restore the address
filtering lists when certain events happen, and they need to walk
through the struct net_device :: uc and struct net_device :: mc lists.
But these lists contain unsynced addresses too.
To keep the appearance of an elementary form of data encapsulation,
provide iterators through these lists that only look at entries with a
non-zero sync_cnt, instead of filtering entries out from device drivers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Tue, 20 Sep 2022 07:13:44 +0000 (09:13 +0200)]
Merge branch 'ice-l2tpv3-offload-support'
Tony Nguyen says:
====================
ice: L2TPv3 offload support
Wojciech Drewek says:
Add support for dissecting L2TPv3 session id in flow dissector. Add support
for this field in tc-flower and support offloading L2TPv3. Finally, add
support for hardware offload of L2TPv3 packets based on session id in
switchdev mode in ice driver.
Example filter:
# tc filter add dev $PF1 ingress prio 1 protocol ip \
flower \
ip_proto l2tp \
l2tpv3_sid 1234 \
skip_sw \
action mirred egress redirect dev $VF1_PR
Changes in iproute2 are required to use the new fields.
ICE COMMS DDP package is required to create a filter in ice.
COMMS DDP package contains profiles of more advanced protocols.
Without COMMS DDP package hw offload will not work, however
sw offload will still work.
====================
Link: https://lore.kernel.org/r/20220908171644.1282191-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Marcin Szycik [Thu, 8 Sep 2022 17:16:44 +0000 (10:16 -0700)]
ice: Add L2TPv3 hardware offload support
Add support for offloading packets based on L2TPv3 session id in switchdev
mode.
Example filter:
tc filter add dev $PF1 ingress prio 1 protocol ip flower ip_proto l2tp \
l2tpv3_sid 1234 skip_sw action mirred egress redirect dev $VF1_PR
Changes in iproute2 are required to be able to specify l2tpv3_sid.
ICE COMMS DDP package is required to create a filter as it contains L2TPv3
profiles.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wojciech Drewek [Thu, 8 Sep 2022 17:16:43 +0000 (10:16 -0700)]
flow_offload: Introduce flow_match_l2tpv3
Allow to offload L2TPv3 filters by adding flow_rule_match_l2tpv3.
Drivers can extract L2TPv3 specific fields from now on.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wojciech Drewek [Thu, 8 Sep 2022 17:16:42 +0000 (10:16 -0700)]
net/sched: flower: Add L2TPv3 filter
Add support for matching on L2TPv3 session ID.
Session ID can be specified only when ip proto was
set to IPPROTO_L2TP.
Example filter:
# tc filter add dev $PF1 ingress prio 1 protocol ip \
flower \
ip_proto l2tp \
l2tpv3_sid 1234 \
skip_sw \
action mirred egress redirect dev $VF1_PR
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wojciech Drewek [Thu, 8 Sep 2022 17:16:41 +0000 (10:16 -0700)]
flow_dissector: Add L2TPv3 dissectors
Allow to dissect L2TPv3 specific field which is:
- session ID (32 bits)
L2TPv3 might be transported over IP or over UDP,
this implementation is only about L2TPv3 over IP.
IP protocol carries L2TPv3 when ip_proto is
IPPROTO_L2TP (115).
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wojciech Drewek [Thu, 8 Sep 2022 17:16:40 +0000 (10:16 -0700)]
uapi: move IPPROTO_L2TP to in.h
IPPROTO_L2TP is currently defined in l2tp.h, but most of
ip protocols are defined in in.h file. Move it there in order
to keep code clean.
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jules Irenge [Mon, 12 Sep 2022 22:03:27 +0000 (23:03 +0100)]
octeon_ep: Remove useless casting value returned by vzalloc to structure
coccinelle reports a warning
WARNING: casting value returned by memory allocation
function to (struct octep_rx_buffer *) is useless.
To fix this the useless cast is removed.
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/Yx+sr9o0uylXVcOl@playground
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nathan Huckleberry [Tue, 13 Sep 2022 23:07:38 +0000 (16:07 -0700)]
openvswitch: Change the return type for vport_ops.send function hook to int
All usages of the vport_ops struct have the .send field set to
dev_queue_xmit or internal_dev_recv. Since most usages are set to
dev_queue_xmit, the function hook should match the signature of
dev_queue_xmit.
The only call to vport_ops->send() is in net/openvswitch/vport.c and it
throws away the return value.
This mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20220913230739.228313-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nathan Huckleberry [Mon, 12 Sep 2022 21:45:10 +0000 (14:45 -0700)]
net: wwan: t7xx: Fix return type of t7xx_ccmni_start_xmit
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of t7xx_ccmni_start_xmit should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20220912214510.929070-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nathan Huckleberry [Mon, 12 Sep 2022 21:44:55 +0000 (14:44 -0700)]
net: wwan: iosm: Fix return type of ipc_wwan_link_transmit
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of ipc_wwan_link_transmit should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20220912214455.929028-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nathan Huckleberry [Mon, 12 Sep 2022 21:43:40 +0000 (14:43 -0700)]
net: korina: Fix return type of korina_send_packet
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of korina_send_packet should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220912214344.928925-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nathan Huckleberry [Mon, 12 Sep 2022 19:53:07 +0000 (12:53 -0700)]
net: ethernet: litex: Fix return type of liteeth_start_xmit
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of liteeth_start_xmit should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Link: https://lore.kernel.org/r/20220912195307.812229-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nathan Huckleberry [Mon, 12 Sep 2022 19:50:19 +0000 (12:50 -0700)]
net: ethernet: ti: davinci_emac: Fix return type of emac_dev_xmit
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of emac_dev_xmit should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220912195023.810319-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nathan Huckleberry [Mon, 12 Sep 2022 19:47:19 +0000 (12:47 -0700)]
net: davicom: Fix return type of dm9000_start_xmit
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of dm9000_start_xmit should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220912194722.809525-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nathan Huckleberry [Mon, 12 Sep 2022 19:40:30 +0000 (12:40 -0700)]
net: ax88796c: Fix return type of ax88796c_start_xmit
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of ax88796c_start_xmit should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Acked-by: Lukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20220912194031.808425-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 20 Sep 2022 01:16:03 +0000 (18:16 -0700)]
Merge tag 'batadv-next-pullrequest-
20220916' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- drop unused headers in trace.h, by Sven Eckelmann
- drop initialization of flexible ethtool_link_ksettings,
by Sven Eckelmann
- remove unused struct definitions, by Marek Lindner
* tag 'batadv-next-pullrequest-
20220916' of git://git.open-mesh.org/linux-merge:
batman-adv: remove unused struct definitions
batman-adv: Drop initialization of flexible ethtool_link_ksettings
batman-adv: Drop unused headers in trace.h
batman-adv: Start new development cycle
====================
Link: https://lore.kernel.org/r/20220916161454.1413154-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 20 Sep 2022 01:08:02 +0000 (18:08 -0700)]
Merge branch 'mlxsw-adjust-qos-tests-for-spectrum-4-testing'
Petr Machata says:
====================
mlxsw: Adjust QOS tests for Spectrum-4 testing
Amit writes:
Quality Of Service tests create congestion and verify the switch behavior.
To create congestion, they need to have more traffic than the port can
handle, so some of them force 1Gbps speed.
The tests assume that 1Gbps speed is supported. Spectrum-4 ASIC will not
support this speed in all ports, so to be able to run QOS tests there,
some adjustments are required.
Patch set overview:
Patch #1 adjusts qos_ets_strict, qos_mc_aware and sch_ets tests.
Patch #2 adjusts RED tests.
Patch #3 extends devlink_lib to support querying maximum pool size.
Patch #4 adds a test which can be used instead of qos_burst and do not
assume that 1Gbps speed is supported.
Patch #5 removes qos_burst test.
====================
Link: https://lore.kernel.org/r/cover.1663152826.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amit Cohen [Wed, 14 Sep 2022 11:21:52 +0000 (13:21 +0200)]
selftests: mlxsw: Remove qos_burst test
The previous patch added a test which can be used instead of qos_burst.sh.
Remove this test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amit Cohen [Wed, 14 Sep 2022 11:21:51 +0000 (13:21 +0200)]
selftests: mlxsw: Add QOS test for maximum use of descriptors
Add an equivalent test to qos_burst, the test's purpose is same, but the
new test uses simpler topology and does not require forcing low speed.
In addition, it can be run Spectrum-2 and not only Spectrum-3+. The idea
is to use a shaper in order to limit the traffic and create congestion.
qos_burst test uses small pool, sends many small packets, and verify that
packets are not dropped, which means that many descriptors can be handled.
This test should check the change that commit
c864769add96
("mlxsw: Configure descriptor buffers") pushed.
Instead, the new test tries to use more than 85% of maximum supported
descriptors. The idea is to use big pool (as much as the ASIC supports),
such that the pool size does not limit the traffic, then send many small
packets, which means that many descriptors are used, and check how many
packets the switch can handle.
The usage of shaper allows to run the test in all ASICs, regardless of
the CPU abilities, as it is able to create the congestion with low rate
of packets.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amit Cohen [Wed, 14 Sep 2022 11:21:50 +0000 (13:21 +0200)]
selftests: devlink_lib: Add function for querying maximum pool size
The maximum pool size is exposed via 'devlink sb' command. The next
patch will add a test which increases some pools to the maximum size.
Add a function to query the value.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amit Cohen [Wed, 14 Sep 2022 11:21:49 +0000 (13:21 +0200)]
selftests: mlxsw: Use shapers in QOS RED tests instead of forcing speed
QOS tests create congestion and verify the switch behavior. To create
congestion, they need to have more traffic than the port can handle, so
some of them force 1Gbps speed.
The tests assume that 1Gbps speed is supported, otherwise, they will fail.
Spectrum-4 ASIC will not support this speed in all ports, so to be able
to run the tests there, some adjustments are required. Use shapers to limit
the traffic instead of forcing speed. Note that for several ports, the
speed configuration is just for autoneg issues, so shaper is not needed
instead.
The tests already use ETS qdisc as a root and RED qdiscs as children. Add
a new TBF shaper to limit the rate of traffic, and use it as a root qdisc,
then save the previous hierarchy of qdiscs under the new TBF root.
In some ASICs, the shapers do not limit the traffic as accurately as
forcing speed. To make the tests stable, allow the backlog size to be up to
+-10% of the threshold. The aim of the tests is to make sure that with
backlog << threshold, there are no drops, and that packets are dropped
somewhere in vicinity of the configured threshold.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amit Cohen [Wed, 14 Sep 2022 11:21:48 +0000 (13:21 +0200)]
selftests: mlxsw: Use shapers in QOS tests instead of forcing speed
QOS tests create congestion and verify the switch behavior. To create
congestion, they need to have more traffic than the port can handle, so
some of them force 1Gbps speed.
The tests assume that 1Gbps speed is supported, otherwise, they will fail.
Spectrum-4 ASIC will not support this speed in all ports, so to be able
to run QOS tests there, some adjustments are required. Use shapers to
limit the traffic instead of forcing speed. Note that for several ports,
the speed configuration is just for autoneg issues, so shaper is not needed
instead.
In tests that already use shapers, set the existing shaper to be a child of
a new TBF shaper which is added as a root qdisc and acts as a port shaper.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 20 Sep 2022 00:59:55 +0000 (17:59 -0700)]
Merge branch 'remove-label-cpu-from-dsa-dt-bindings'
Vladimir Oltean says:
====================
Remove label = "cpu" from DSA dt-bindings
As explained in more detail in patch 1/3, label = "cpu" is not part of
DSA's device tree bindings, yet we have some checks in the dt-schema for
mt7530 which are written as if it was.
Reformulate those checks, and remove all occurrences of this seemingly
used, but actually unused, property from the binding examples.
====================
Link: https://lore.kernel.org/r/20220912175058.280386-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 12 Sep 2022 17:50:58 +0000 (20:50 +0300)]
dt-bindings: net: dsa: remove label = "cpu" from examples
This is not used by the DSA dt-binding, so remove it from all examples.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 12 Sep 2022 17:50:57 +0000 (20:50 +0300)]
dt-bindings: net: dsa: mt7530: stop requiring phy-mode on CPU ports
The common dsa-port.yaml does this (and more) since commit
2ec2fb8331af
("dt-bindings: net: dsa: make phylink bindings required for CPU/DSA
ports").
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 12 Sep 2022 17:50:56 +0000 (20:50 +0300)]
dt-bindings: net: dsa: mt7530: replace label = "cpu" with proper checks
The fact that some DSA device trees use 'label = "cpu"' for the CPU port
is nothing but blind cargo cult copying. The 'label' property was never
part of the DSA DT bindings for anything except the user ports, where it
provided a hint as to what name the created netdevs should use.
DSA does use the "cpu" port label to identify a CPU port in dsa_port_parse(),
but this is only for non-OF code paths (platform data).
The proper way to identify a CPU port is to look at whether the
'ethernet' phandle is present.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xiu Jianfeng [Fri, 9 Sep 2022 09:18:40 +0000 (17:18 +0800)]
net: rds: add missing __init/__exit annotations to module init/exit funcs
Add missing __init/__exit annotations to module init/exit funcs.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20220909091840.247946-1-xiujianfeng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gaosheng Cui [Fri, 9 Sep 2022 06:40:42 +0000 (14:40 +0800)]
rxrpc: remove rxrpc_max_call_lifetime declaration
rxrpc_max_call_lifetime has been removed since
commit
a158bdd3247b ("rxrpc: Fix call timeouts"),
so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20220909064042.1149404-1-cuigaosheng1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yang Yingliang [Wed, 14 Sep 2022 14:01:00 +0000 (22:01 +0800)]
net/mlx5e: Switch to kmemdup() when allocate dev_addr
Use kmemdup() helper instead of open-coding to
simplify the code when allocate dev_addr.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20220914140100.3795545-2-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yang Yingliang [Wed, 14 Sep 2022 14:00:59 +0000 (22:00 +0800)]
net/mlx5e: add missing error code in error path
Add missing error code when mlx5e_macsec_fs_add_rule() or
mlx5e_macsec_fs_init() fails. mlx5e_macsec_fs_init() don't
return ERR_PTR(), so replace IS_ERR_OR_NULL() check with
NULL pointer check.
Fixes:
e467b283ffd5 ("net/mlx5e: Add MACsec TX steering rules")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20220914140100.3795545-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 20 Sep 2022 00:58:27 +0000 (17:58 -0700)]
Merge branch 'standardized-ethtool-counters-for-nxp-enetc'
Vladimir Oltean says:
====================
Standardized ethtool counters for NXP ENETC
This is another preparation patch for the introduction of MAC Merge
Layer statistics, this time for the enetc driver (endpoint ports on the
NXP LS1028A). The same set of stats groups is supported as in the case
of the Felix DSA switch.
====================
Link: https://lore.kernel.org/r/20220909113800.55225-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Fri, 9 Sep 2022 11:38:00 +0000 (14:38 +0300)]
net: enetc: expose some standardized ethtool counters
Structure the code in such a way that it can be reused later for the
pMAC statistics, by just changing the "mac" argument to 1.
Usage:
ethtool --include-statistics --show-pause eno2
ethtool -S eno0 --groups eth-mac
ethtool -S eno0 --groups eth-ctrl
ethtool -S eno0 --groups rmon
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Fri, 9 Sep 2022 11:37:59 +0000 (14:37 +0300)]
net: enetc: parameterize port MAC stats to also cover the pMAC
The ENETC has counters for the eMAC and for the pMAC exactly 0x1000
apart from each other. The driver only contains definitions for PM0,
the eMAC.
Rather than duplicating everything for PM1, modify the register
definitions such that they take the MAC as argument.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geert Uytterhoeven [Fri, 9 Sep 2022 10:10:11 +0000 (12:10 +0200)]
net: ravb: Add R-Car Gen4 support
Add support for the Renesas Ethernet AVB (EtherAVB-IF) blocks on R-Car
Gen4 SoCs (e.g. R-Car V4H) by matching on a family-specific compatible
value.
These are treated the same as EtherAVB on R-Car Gen3.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/2ee968890feba777e627d781128b074b2c43cddb.1662718171.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 20 Sep 2022 00:57:56 +0000 (17:57 -0700)]
Merge branch 'dt-bindings-net-renesas-etheravb-r-car-gen4-updates'
Geert Uytterhoeven says:
====================
dt-bindings: net: renesas,etheravb: R-Car Gen4 updates
This patch series contains two updates for the Renesas Ethernet AVB
Device Tree bindings.
====================
Link: https://lore.kernel.org/r/cover.1662714607.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geert Uytterhoeven [Fri, 9 Sep 2022 09:13:23 +0000 (11:13 +0200)]
dt-bindings: net: renesas,etheravb: Add r8a779g0 support
Document support for the Renesas Ethernet AVB (EtherAVB-IF) block in the
Renesas R-Car V4H (R8A779G0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geert Uytterhoeven [Fri, 9 Sep 2022 09:13:22 +0000 (11:13 +0200)]
dt-bindings: net: renesas,etheravb: R-Car V3U is R-Car Gen4
Despite the name, R-Car V3U is the first member of the R-Car Gen4
family. Hence move its compatible value to the R-Car Gen4 section.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Divya Koppera [Fri, 9 Sep 2022 08:31:23 +0000 (14:01 +0530)]
net: phy: micrel: Cable Diag feature for lan8814 phy
Support for Cable Diagnostics in lan8814 phy
Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220909083123.30134-1-Divya.Koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 20 Sep 2022 00:57:29 +0000 (17:57 -0700)]
Merge branch 'add-fec-support-on-s32v234-platform'
Wei Fang says:
====================
Add FEC support on s32v234 platform
This series patches are to add FEC support on s32v234 platfom.
1. Add compatible string and quirks for fsl,s32v234
2. Update Kconfig to also check for ARCH_S32.
====================
Link: https://lore.kernel.org/r/20220907095649.3101484-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Fang [Wed, 7 Sep 2022 09:56:49 +0000 (17:56 +0800)]
net: fec: Add initial s32v234 support
Update Kconfig to also check for ARCH_S32.
Add compatible string and quirks for fsl,s32v234
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Fang [Wed, 7 Sep 2022 09:56:48 +0000 (17:56 +0800)]
dt-bindings: net: fec: add fsl,s32v234-fec to compatible property
Add fsl,s32v234-fec to compatible property to support s32v234 platform.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 19 Sep 2022 21:21:53 +0000 (14:21 -0700)]
Merge tag 'ib-mfd-net-pinctrl-v6.0' of git://git./linux/kernel/git/lee/mfd
Lee Jones says:
====================
Immutable branch between MFD, Net and Pinctrl due for the v6.0 merge window
* tag 'ib-mfd-net-pinctrl-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: ocelot: Add support for the vsc7512 chip via spi
dt-bindings: mfd: ocelot: Add bindings for VSC7512
resource: add define macro for register address resources
pinctrl: microchip-sgpio: add ability to be used in a non-mmio configuration
pinctrl: microchip-sgpio: allow sgpio driver to be used as a module
pinctrl: ocelot: add ability to be used in a non-mmio configuration
net: mdio: mscc-miim: add ability to be used in a non-mmio configuration
mfd: ocelot: Add helper to get regmap from a resource
====================
Link: https://lore.kernel.org/r/YxrjyHcceLOFlT/c@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sun Ke [Thu, 8 Sep 2022 04:02:26 +0000 (12:02 +0800)]
net: dsa: microchip: lan937x: fix reference count leak in lan937x_mdio_register()
This node pointer is returned by of_find_compatible_node() with
refcount incremented in this function. of_node_put() on it before
exitting this function.
Fixes:
c9cd961c0d43 ("net: dsa: microchip: lan937x: add interrupt support for port phy link")
Signed-off-by: Sun Ke <sunke32@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220908040226.871690-1-sunke32@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Fri, 9 Sep 2022 06:00:22 +0000 (08:00 +0200)]
r8169: disable detection of chip version 36
I found no evidence that this chip version ever made it to the mass
market. Therefore disable detection. Like in similar cases before:
If nobody complains, we'll remove support for this chip version after
few months.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/ac622d4a-ae0a-3817-710f-849db4015c78@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gaosheng Cui [Fri, 9 Sep 2022 06:29:59 +0000 (14:29 +0800)]
net: ethernet: remove fs_mii_disconnect and fs_mii_connect declarations
fs_mii_disconnect and fs_mii_connect have been removed since
commit
5b4b8454344a ("[PATCH] FS_ENET: use PAL for mii management"),
so remove them.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220909062959.1144493-1-cuigaosheng1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Sat, 17 Sep 2022 19:13:41 +0000 (20:13 +0100)]
Merge branch 'octeontx2-cn10k-ptp'
From: Naveen Mamindlapalli <naveenm@marvell.com>
To: <kuba@kernel.org>, <davem@davemloft.net>, <edumazet@google.com>,
<pabeni@redhat.com>, <richardcochran@gmail.com>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<sgoutham@marvell.com>, <hkelam@marvell.com>
Cc: Naveen Mamindlapalli <naveenm@marvell.com>
Subject: [net-next PATCH 0/4] Add PTP support for CN10K silicon
Date: Sat, 10 Sep 2022 13:24:12 +0530 [thread overview]
Message-ID: <
20220910075416.22887-1-naveenm@marvell.com> (raw)
This patchset adds PTP support for CN10K silicon, specifically
to workaround few hardware issues and to add 1-step mode.
Patchset overview:
Patch #1 returns correct ptp timestamp in nanoseconds captured
when external timestamp event occurs.
Patch #2 adds 1-step mode support.
Patch #3 implements software workaround to generate PPS output properly.
Patch #4 provides a software workaround for the rollover register default
value, which causes ptp to return the wrong timestamp.
====================
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Naveen Mamindlapalli [Sat, 10 Sep 2022 07:54:16 +0000 (13:24 +0530)]
octeontx2-af: Initialize PTP_SEC_ROLLOVER register properly
Since the reset value of PTP_SEC_ROLLOVER is incorrect on
CNF10KB silicon, the ptp timestamps are inaccurate. This
patch initializes the PTP_SEC_ROLLOVER register properly
for the CNF10KB silicon.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Naveen Mamindlapalli [Sat, 10 Sep 2022 07:54:15 +0000 (13:24 +0530)]
octeontx2-af: Add PTP PPS Errata workaround on CN10K silicon
Errata:
The ptp_clock_hi rollsover to zero one clock cycle before it
reaches one second boundary. As a result, the pps threshold
comparison fails after one second and the pps output signal
won't toggle further.
This patch workarounds the issue by programming the pps_lo_incr
register to 500msec minus one clock cycle period, ensuring that
the pps threshold comparison succeeds at one second rollover
boundary and pps edge toggles. After that point, the driver will
have enough time (~500msec) to reset the pps threshold value.
After each one second boundary, hrtimer is invoked which resets
the pps threshold value.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Kelam [Sat, 10 Sep 2022 07:54:14 +0000 (13:24 +0530)]
octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon
Add support for ptp 1-step mode using timecounter. The seconds and
nanoseconds to be updated in PTP header are calculated by adding the
timecounter offset to the free running PTP clock counter time. The PF
driver periodically gets the PTP clock time using AF mbox. The 1-step
support uses HW feature to update correction field rather than
OriginTimestamp field in PTP header.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Naveen Mamindlapalli [Sat, 10 Sep 2022 07:54:13 +0000 (13:24 +0530)]
octeontx2-af: return correct ptp timestamp for CN10K silicon
The MIO_PTP_TIMESTAMP format has been changed in CN10K silicon
family. The upper 32-bits represents seconds and lower 32-bits
represents nanoseconds. This patch returns nanosecond timestamp
to NIX PF driver.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 16 Sep 2022 20:56:27 +0000 (21:56 +0100)]
Merge tag 'linux-can-next-for-6.1-
20220915' of git://git./linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
Sept. 15, 2022, 8:19 a.m. UTC
Hello Jakub, hello David,
this is a pull request of 23 patches for net-next/master.
the first 2 patches are by me and fix a typo in the rx-offload helper
and the flexcan driver.
Christophe JAILLET's patch cleans up the error handling in
rcar_canfd driver's probe function.
Kenneth Lee's patch converts the kvaser_usb driver from kcalloc() to
kzalloc().
Biju Das contributes 2 patches to the sja1000 driver which update the
DT bindings and support for the RZ/N1 SJA1000 CAN controller.
Jinpeng Cui provides 2 patches that remove redundant variables from
the sja1000 and kvaser_pciefd driver.
2 patches by John Whittington and me add hardware timestamp support to
the gs_usb driver.
Gustavo A. R. Silva's patch converts the etas_es58x driver to make use
of DECLARE_FLEX_ARRAY().
Krzysztof Kozlowski's patch cleans up the sja1000 DT bindings.
Dario Binacchi fixes his invalid email in the flexcan driver
documentation.
Ziyang Xuan contributes 2 patches that clean up the CAN RAW protocol.
Yang Yingliang's patch switches the flexcan driver to dev_err_probe().
The last 7 patches are by Oliver Hartkopp and add support for the next
generation of the CAN protocol: CAN with eXtended data Length (CAN XL).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Arun Ramadoss [Wed, 7 Sep 2022 07:20:39 +0000 (12:50 +0530)]
net: dsa: microchip: add the support for set_ageing_time
KSZ9477 has the 11 bit ageing count value which is split across the two
registers. And LAN937x has the 20 bit ageing count which is also split
into two registers. Each count in the registers represents 1 second.
This patch add the support for ageing time for KSZ9477 and LAN937x
series of switch.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 16 Sep 2022 13:25:17 +0000 (14:25 +0100)]
Merge branch 'net-tc-testing-new-tests'
Zhengchao Shao says:
====================
net: add tc-testing test cases
For this patchset, test cases of the ctinfo, gate, and xt action modules
are added to the tc-testing test suite. Also add deleting test for
connmark, ife, nat, sample and tunnel_key action modules.
After a test case is added locally, the test result is as follows:
./tdc.py -c action ctinfo
considering category action
considering category ctinfo
Test c826: Add ctinfo action with default setting
Test 0286: Add ctinfo action with dscp
Test 4938: Add ctinfo action with valid cpmark and zone
Test 7593: Add ctinfo action with drop control
Test 2961: Replace ctinfo action zone and action control
Test e567: Delete ctinfo action with valid index
Test 6a91: Delete ctinfo action with invalid index
Test 5232: List ctinfo actions
Test 7702: Flush ctinfo actions
Test 3201: Add ctinfo action with duplicate index
Test 8295: Add ctinfo action with invalid index
Test 3964: Replace ctinfo action with invalid goto_chain control
All test results:
1..12
ok 1 c826 - Add ctinfo action with default setting
ok 2 0286 - Add ctinfo action with dscp
ok 3 4938 - Add ctinfo action with valid cpmark and zone
ok 4 7593 - Add ctinfo action with drop control
ok 5 2961 - Replace ctinfo action zone and action control
ok 6 e567 - Delete ctinfo action with valid index
ok 7 6a91 - Delete ctinfo action with invalid index
ok 8 5232 - List ctinfo actions
ok 9 7702 - Flush ctinfo actions
ok 10 3201 - Add ctinfo action with duplicate index
ok 11 8295 - Add ctinfo action with invalid index
ok 12 3964 - Replace ctinfo action with invalid goto_chain control
./tdc.py -c action gate
considering category gate
considering category action
Test 5153: Add gate action with priority and sched-entry
Test 7189: Add gate action with base-time
Test a721: Add gate action with cycle-time
Test c029: Add gate action with cycle-time-ext
Test 3719: Replace gate base-time action
Test d821: Delete gate action with valid index
Test 3128: Delete gate action with invalid index
Test 7837: List gate actions
Test 9273: Flush gate actions
Test c829: Add gate action with duplicate index
Test 3043: Add gate action with invalid index
Test 2930: Add gate action with cookie
All test results:
1..12
ok 1 5153 - Add gate action with priority and sched-entry
ok 2 7189 - Add gate action with base-time
ok 3 a721 - Add gate action with cycle-time
ok 4 c029 - Add gate action with cycle-time-ext
ok 5 3719 - Replace gate base-time action
ok 6 d821 - Delete gate action with valid index
ok 7 3128 - Delete gate action with invalid index
ok 8 7837 - List gate actions
ok 9 9273 - Flush gate actions
ok 10 c829 - Add gate action with duplicate index
ok 11 3043 - Add gate action with invalid index
ok 12 2930 - Add gate action with cookie
./tdc.py -c action xt
considering category xt
considering category action
Test 2029: Add xt action with log-prefix
Test 3562: Replace xt action log-prefix
Test 8291: Delete xt action with valid index
Test 5169: Delete xt action with invalid index
Test 7284: List xt actions
Test 5010: Flush xt actions
Test 8437: Add xt action with duplicate index
Test 2837: Add xt action with invalid index
All test results:
1..8
ok 1 2029 - Add xt action with log-prefix
ok 2 3562 - Replace xt action log-prefix
ok 3 8291 - Delete xt action with valid index
ok 4 5169 - Delete xt action with invalid index
ok 5 7284 - List xt actions
ok 6 5010 - Flush xt actions
ok 7 8437 - Add xt action with duplicate index
ok 8 2837 - Add xt action with invalid index
./tdc.py -c action connmark
considering category action
considering category connmark
Test 2002: Add valid connmark action with defaults
Test 56a5: Add valid connmark action with control pass
Test 7c66: Add valid connmark action with control drop
Test a913: Add valid connmark action with control pipe
Test bdd8: Add valid connmark action with control reclassify
Test b8be: Add valid connmark action with control continue
Test d8a6: Add valid connmark action with control jump
Test aae8: Add valid connmark action with zone argument
Test 2f0b: Add valid connmark action with invalid zone argument
Test 9305: Add connmark action with unsupported argument
Test 71ca: Add valid connmark action and replace it
Test 5f8f: Add valid connmark action with cookie
Test c506: Replace connmark with invalid goto chain control
Test 6571: Delete connmark action with valid index
Test 3426: Delete connmark action with invalid index
All test results:
1..15
ok 1 2002 - Add valid connmark action with defaults
ok 2 56a5 - Add valid connmark action with control pass
ok 3 7c66 - Add valid connmark action with control drop
ok 4 a913 - Add valid connmark action with control pipe
ok 5 bdd8 - Add valid connmark action with control reclassify
ok 6 b8be - Add valid connmark action with control continue
ok 7 d8a6 - Add valid connmark action with control jump
ok 8 aae8 - Add valid connmark action with zone argument
ok 9 2f0b - Add valid connmark action with invalid zone argument
ok 10 9305 - Add connmark action with unsupported argument
ok 11 71ca - Add valid connmark action and replace it
ok 12 5f8f - Add valid connmark action with cookie
ok 13 c506 - Replace connmark with invalid goto chain control
ok 14 6571 - Delete connmark action with valid index
ok 15 3426 - Delete connmark action with invalid index
./tdc.py -c action ife
considering category action
considering category ife
Test 7682: Create valid ife encode action with mark and pass control
Test ef47: Create valid ife encode action with mark and pipe control
Test df43: Create valid ife encode action with mark and continue control
Test e4cf: Create valid ife encode action with mark and drop control
Test ccba: Create valid ife encode action with mark and reclassify control
Test a1cf: Create valid ife encode action with mark and jump control
Test cb3d: Create valid ife encode action with mark value at 32-bit
maximum
Test 1efb: Create ife encode action with mark value exceeding 32-bit
maximum
Test 95ed: Create valid ife encode action with prio and pass control
Test aa17: Create valid ife encode action with prio and pipe control
Test 74c7: Create valid ife encode action with prio and continue control
Test 7a97: Create valid ife encode action with prio and drop control
Test f66b: Create valid ife encode action with prio and reclassify control
Test 3056: Create valid ife encode action with prio and jump control
Test 7dd3: Create valid ife encode action with prio value at 32-bit
maximum
Test 2ca1: Create ife encode action with prio value exceeding 32-bit
maximum
Test 05bb: Create valid ife encode action with tcindex and pass control
Test ce65: Create valid ife encode action with tcindex and pipe control
Test 09cd: Create valid ife encode action with tcindex and continue control
Test 8eb5: Create valid ife encode action with tcindex and continue control
Test 451a: Create valid ife encode action with tcindex and drop control
Test d76c: Create valid ife encode action with tcindex and reclassify
control
Test e731: Create valid ife encode action with tcindex and jump control
Test b7b8: Create valid ife encode action with tcindex value at 16-bit
maximum
Test d0d8: Create ife encode action with tcindex value exceeding 16-bit
maximum
Test 2a9c: Create valid ife encode action with mac src parameter
Test cf5c: Create valid ife encode action with mac dst parameter
Test 2353: Create valid ife encode action with mac src and mac dst
parameters
Test 552c: Create valid ife encode action with mark and type parameters
Test 0421: Create valid ife encode action with prio and type parameters
Test 4017: Create valid ife encode action with tcindex and type parameters
Test fac3: Create valid ife encode action with index at 32-bit maximum
Test 7c25: Create valid ife decode action with pass control
Test dccb: Create valid ife decode action with pipe control
Test 7bb9: Create valid ife decode action with continue control
Test d9ad: Create valid ife decode action with drop control
Test 219f: Create valid ife decode action with reclassify control
Test 8f44: Create valid ife decode action with jump control
Test 56cf: Create ife encode action with index exceeding 32-bit maximum
Test ee94: Create ife encode action with invalid control
Test b330: Create ife encode action with cookie
Test bbc0: Create ife encode action with invalid argument
Test d54a: Create ife encode action with invalid type argument
Test 7ee0: Create ife encode action with invalid mac src argument
Test 0a7d: Create ife encode action with invalid mac dst argument
Test a0e2: Replace ife encode action with invalid goto chain control
Test a972: Delete ife encode action with valid index
Test 1272: Delete ife encode action with invalid index
All test results:
1..48
ok 1 7682 - Create valid ife encode action with mark and pass control
ok 2 ef47 - Create valid ife encode action with mark and pipe control
ok 3 df43 - Create valid ife encode action with mark and continue control
ok 4 e4cf - Create valid ife encode action with mark and drop control
ok 5 ccba - Create valid ife encode action with mark and reclassify
control
ok 6 a1cf - Create valid ife encode action with mark and jump control
ok 7 cb3d - Create valid ife encode action with mark value at 32-bit
maximum
ok 8 1efb - Create ife encode action with mark value exceeding 32-bit
maximum
ok 9 95ed - Create valid ife encode action with prio and pass control
ok 10 aa17 - Create valid ife encode action with prio and pipe control
ok 11 74c7 - Create valid ife encode action with prio and continue control
ok 12 7a97 - Create valid ife encode action with prio and drop control
ok 13 f66b - Create valid ife encode action with prio and reclassify
control
ok 14 3056 - Create valid ife encode action with prio and jump control
ok 15 7dd3 - Create valid ife encode action with prio value at 32-bit
maximum
ok 16 2ca1 - Create ife encode action with prio value exceeding 32-bit
maximum
ok 17 05bb - Create valid ife encode action with tcindex and pass control
ok 18 ce65 - Create valid ife encode action with tcindex and pipe control
ok 19 09cd - Create valid ife encode action with tcindex and continue
control
ok 20 8eb5 - Create valid ife encode action with tcindex and continue
control
ok 21 451a - Create valid ife encode action with tcindex and drop control
ok 22 d76c - Create valid ife encode action with tcindex and reclassify
control
ok 23 e731 - Create valid ife encode action with tcindex and jump control
ok 24 b7b8 - Create valid ife encode action with tcindex value at 16-bit
maximum
ok 25 d0d8 - Create ife encode action with tcindex value exceeding 16-bit
maximum
ok 26 2a9c - Create valid ife encode action with mac src parameter
ok 27 cf5c - Create valid ife encode action with mac dst parameter
ok 28 2353 - Create valid ife encode action with mac src and mac dst
parameters
ok 29 552c - Create valid ife encode action with mark and type parameters
ok 30 0421 - Create valid ife encode action with prio and type parameters
ok 31 4017 - Create valid ife encode action with tcindex and type
parameters
ok 32 fac3 - Create valid ife encode action with index at 32-bit maximum
ok 33 7c25 - Create valid ife decode action with pass control
ok 34 dccb - Create valid ife decode action with pipe control
ok 35 7bb9 - Create valid ife decode action with continue control
ok 36 d9ad - Create valid ife decode action with drop control
ok 37 219f - Create valid ife decode action with reclassify control
ok 38 8f44 - Create valid ife decode action with jump control
ok 39 56cf - Create ife encode action with index exceeding 32-bit maximum
ok 40 ee94 - Create ife encode action with invalid control
ok 41 b330 - Create ife encode action with cookie
ok 42 bbc0 - Create ife encode action with invalid argument
ok 43 d54a - Create ife encode action with invalid type argument
ok 44 7ee0 - Create ife encode action with invalid mac src argument
ok 45 0a7d - Create ife encode action with invalid mac dst argument
ok 46 a0e2 - Replace ife encode action with invalid goto chain control
ok 47 a972 - Delete ife encode action with valid index
ok 48 1272 - Delete ife encode action with invalid index
./tdc.py -c action nat
considering category action
considering category nat
Test 7565: Add nat action on ingress with default control action
Test fd79: Add nat action on ingress with pipe control action
Test eab9: Add nat action on ingress with continue control action
Test c53a: Add nat action on ingress with reclassify control action
Test 76c9: Add nat action on ingress with jump control action
Test 24c6: Add nat action on ingress with drop control action
Test 2120: Add nat action on ingress with maximum index value
Test 3e9d: Add nat action on ingress with invalid index value
Test f6c9: Add nat action on ingress with invalid IP address
Test be25: Add nat action on ingress with invalid argument
Test a7bd: Add nat action on ingress with DEFAULT IP address
Test ee1e: Add nat action on ingress with ANY IP address
Test 1de8: Add nat action on ingress with ALL IP address
Test 8dba: Add nat action on egress with default control action
Test 19a7: Add nat action on egress with pipe control action
Test f1d9: Add nat action on egress with continue control action
Test 6d4a: Add nat action on egress with reclassify control action
Test b313: Add nat action on egress with jump control action
Test d9fc: Add nat action on egress with drop control action
Test a895: Add nat action on egress with DEFAULT IP address
Test 2572: Add nat action on egress with ANY IP address
Test 37f3: Add nat action on egress with ALL IP address
Test 6054: Add nat action on egress with cookie
Test 79d6: Add nat action on ingress with cookie
Test 4b12: Replace nat action with invalid goto chain control
Test b811: Delete nat action with valid index
Test a521: Delete nat action with invalid index
All test results:
1..27
ok 1 7565 - Add nat action on ingress with default control action
ok 2 fd79 - Add nat action on ingress with pipe control action
ok 3 eab9 - Add nat action on ingress with continue control action
ok 4 c53a - Add nat action on ingress with reclassify control action
ok 5 76c9 - Add nat action on ingress with jump control action
ok 6 24c6 - Add nat action on ingress with drop control action
ok 7 2120 - Add nat action on ingress with maximum index value
ok 8 3e9d - Add nat action on ingress with invalid index value
ok 9 f6c9 - Add nat action on ingress with invalid IP address
ok 10 be25 - Add nat action on ingress with invalid argument
ok 11 a7bd - Add nat action on ingress with DEFAULT IP address
ok 12 ee1e - Add nat action on ingress with ANY IP address
ok 13 1de8 - Add nat action on ingress with ALL IP address
ok 14 8dba - Add nat action on egress with default control action
ok 15 19a7 - Add nat action on egress with pipe control action
ok 16 f1d9 - Add nat action on egress with continue control action
ok 17 6d4a - Add nat action on egress with reclassify control action
ok 18 b313 - Add nat action on egress with jump control action
ok 19 d9fc - Add nat action on egress with drop control action
ok 20 a895 - Add nat action on egress with DEFAULT IP address
ok 21 2572 - Add nat action on egress with ANY IP address
ok 22 37f3 - Add nat action on egress with ALL IP address
ok 23 6054 - Add nat action on egress with cookie
ok 24 79d6 - Add nat action on ingress with cookie
ok 25 4b12 - Replace nat action with invalid goto chain control
ok 26 b811 - Delete nat action with valid index
ok 27 a521 - Delete nat action with invalid index
./tdc.py -c action sample
considering category action
considering category sample
Test 9784: Add valid sample action with mandatory arguments
Test 5c91: Add valid sample action with mandatory arguments and continue
control action
Test 334b: Add valid sample action with mandatory arguments and drop
control action
Test da69: Add valid sample action with mandatory arguments and reclassify
control action
Test 13ce: Add valid sample action with mandatory arguments and pipe
control action
Test 1886: Add valid sample action with mandatory arguments and jump
control action
Test 7571: Add sample action with invalid rate
Test b6d4: Add sample action with mandatory arguments and invalid control
action
Test a874: Add invalid sample action without mandatory arguments
Test ac01: Add invalid sample action without mandatory argument rate
Test 4203: Add invalid sample action without mandatory argument group
Test 14a7: Add invalid sample action without mandatory argument group
Test 8f2e: Add valid sample action with trunc argument
Test 45f8: Add sample action with maximum rate argument
Test ad0c: Add sample action with maximum trunc argument
Test 83a9: Add sample action with maximum group argument
Test ed27: Add sample action with invalid rate argument
Test 2eae: Add sample action with invalid group argument
Test 6ff3: Add sample action with invalid trunc size
Test 2b2a: Add sample action with invalid index
Test dee2: Add sample action with maximum allowed index
Test 560e: Add sample action with cookie
Test 704a: Replace existing sample action with new rate argument
Test 60eb: Replace existing sample action with new group argument
Test 2cce: Replace existing sample action with new trunc argument
Test 59d1: Replace existing sample action with new control argument
Test 0a6e: Replace sample action with invalid goto chain control
Test 3872: Delete sample action with valid index
Test a394: Delete sample action with invalid index
All test results:
1..29
ok 1 9784 - Add valid sample action with mandatory arguments
ok 2 5c91 - Add valid sample action with mandatory arguments and continue
control action
ok 3 334b - Add valid sample action with mandatory arguments and drop
control action
ok 4 da69 - Add valid sample action with mandatory arguments and
reclassify control action
ok 5 13ce - Add valid sample action with mandatory arguments and pipe
control action
ok 6 1886 - Add valid sample action with mandatory arguments and jump
control action
ok 7 7571 - Add sample action with invalid rate
ok 8 b6d4 - Add sample action with mandatory arguments and invalid control
action
ok 9 a874 - Add invalid sample action without mandatory arguments
ok 10 ac01 - Add invalid sample action without mandatory argument rate
ok 11 4203 - Add invalid sample action without mandatory argument group
ok 12 14a7 - Add invalid sample action without mandatory argument group
ok 13 8f2e - Add valid sample action with trunc argument
ok 14 45f8 - Add sample action with maximum rate argument
ok 15 ad0c - Add sample action with maximum trunc argument
ok 16 83a9 - Add sample action with maximum group argument
ok 17 ed27 - Add sample action with invalid rate argument
ok 18 2eae - Add sample action with invalid group argument
ok 19 6ff3 - Add sample action with invalid trunc size
ok 20 2b2a - Add sample action with invalid index
ok 21 dee2 - Add sample action with maximum allowed index
ok 22 560e - Add sample action with cookie
ok 23 704a - Replace existing sample action with new rate argument
ok 24 60eb - Replace existing sample action with new group argument
ok 25 2cce - Replace existing sample action with new trunc argument
ok 26 59d1 - Replace existing sample action with new control argument
ok 27 0a6e - Replace sample action with invalid goto chain control
ok 28 3872 - Delete sample action with valid index
ok 29 a394 - Delete sample action with invalid index
./tdc.py -c action tunnel_key
considering category tunnel_key
considering category action
Test 2b11: Add tunnel_key set action with mandatory parameters
Test dc6b: Add tunnel_key set action with missing mandatory src_ip
parameter
Test 7f25: Add tunnel_key set action with missing mandatory dst_ip
parameter
Test a5e0: Add tunnel_key set action with invalid src_ip parameter
Test eaa8: Add tunnel_key set action with invalid dst_ip parameter
Test 3b09: Add tunnel_key set action with invalid id parameter
Test 9625: Add tunnel_key set action with invalid dst_port parameter
Test 05af: Add tunnel_key set action with optional dst_port parameter
Test da80: Add tunnel_key set action with index at 32-bit maximum
Test d407: Add tunnel_key set action with index exceeding 32-bit maximum
Test 5cba: Add tunnel_key set action with id value at 32-bit maximum
Test e84a: Add tunnel_key set action with id value exceeding 32-bit
maximum
Test 9c19: Add tunnel_key set action with dst_port value at 16-bit maximum
Test 3bd9: Add tunnel_key set action with dst_port value exceeding 16-bit
maximum
Test 68e2: Add tunnel_key unset action
Test 6192: Add tunnel_key unset continue action
Test 061d: Add tunnel_key set continue action with cookie
Test 8acb: Add tunnel_key set continue action with invalid cookie
Test a07e: Add tunnel_key action with no set/unset command specified
Test b227: Add tunnel_key action with csum option
Test 58a7: Add tunnel_key action with nocsum option
Test 2575: Add tunnel_key action with not-supported parameter
Test 7a88: Add tunnel_key action with cookie parameter
Test 4f20: Add tunnel_key action with a single geneve option parameter
Test e33d: Add tunnel_key action with multiple geneve options parameter
Test 0778: Add tunnel_key action with invalid class geneve option
parameter
Test 4ae8: Add tunnel_key action with invalid type geneve option parameter
Test 4039: Add tunnel_key action with short data length geneve option
parameter
Test 26a6: Add tunnel_key action with non-multiple of 4 data length geneve
option parameter
Test f44d: Add tunnel_key action with incomplete geneve options parameter
Test 7afc: Replace tunnel_key set action with all parameters
Test 364d: Replace tunnel_key set action with all parameters and cookie
Test 937c: Fetch all existing tunnel_key actions
Test 6783: Flush all existing tunnel_key actions
Test 8242: Replace tunnel_key set action with invalid goto chain
Test 0cd2: Add tunnel_key set action with no_percpu flag
Test 3671: Delete tunnel_key set action with valid index
Test 8597: Delete tunnel_key set action with invalid index
All test results:
1..38
ok 1 2b11 - Add tunnel_key set action with mandatory parameters
ok 2 dc6b - Add tunnel_key set action with missing mandatory src_ip
parameter
ok 3 7f25 - Add tunnel_key set action with missing mandatory dst_ip
parameter
ok 4 a5e0 - Add tunnel_key set action with invalid src_ip parameter
ok 5 eaa8 - Add tunnel_key set action with invalid dst_ip parameter
ok 6 3b09 - Add tunnel_key set action with invalid id parameter
ok 7 9625 - Add tunnel_key set action with invalid dst_port parameter
ok 8 05af - Add tunnel_key set action with optional dst_port parameter
ok 9 da80 - Add tunnel_key set action with index at 32-bit maximum
ok 10 d407 - Add tunnel_key set action with index exceeding 32-bit maximum
ok 11 5cba - Add tunnel_key set action with id value at 32-bit maximum
ok 12 e84a - Add tunnel_key set action with id value exceeding 32-bit
maximum
ok 13 9c19 - Add tunnel_key set action with dst_port value at 16-bit
maximum
ok 14 3bd9 - Add tunnel_key set action with dst_port value exceeding
16-bit maximum
ok 15 68e2 - Add tunnel_key unset action
ok 16 6192 - Add tunnel_key unset continue action
ok 17 061d - Add tunnel_key set continue action with cookie
ok 18 8acb - Add tunnel_key set continue action with invalid cookie
ok 19 a07e - Add tunnel_key action with no set/unset command specified
ok 20 b227 - Add tunnel_key action with csum option
ok 21 58a7 - Add tunnel_key action with nocsum option
ok 22 2575 - Add tunnel_key action with not-supported parameter
ok 23 7a88 - Add tunnel_key action with cookie parameter
ok 24 4f20 - Add tunnel_key action with a single geneve option parameter
ok 25 e33d - Add tunnel_key action with multiple geneve options parameter
ok 26 0778 - Add tunnel_key action with invalid class geneve option
parameter
ok 27 4ae8 - Add tunnel_key action with invalid type geneve option
parameter
ok 28 4039 - Add tunnel_key action with short data length geneve option
parameter
ok 29 26a6 - Add tunnel_key action with non-multiple of 4 data length
geneve option parameter
ok 30 f44d - Add tunnel_key action with incomplete geneve options
parameter
ok 31 7afc - Replace tunnel_key set action with all parameters
ok 32 364d - Replace tunnel_key set action with all parameters and cookie
ok 33 937c - Fetch all existing tunnel_key actions
ok 34 6783 - Flush all existing tunnel_key actions
ok 35 8242 - Replace tunnel_key set action with invalid goto chain
ok 36 0cd2 - Add tunnel_key set action with no_percpu flag
ok 37 3671 - Delete tunnel_key set action with valid index
ok 38 8597 - Delete tunnel_key set action with invalid index
====================
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Fri, 9 Sep 2022 01:29:36 +0000 (09:29 +0800)]
selftests/tc-testings: add tunnel_key action deleting test case
Test 3671: Delete tunnel_key set action with valid index
Test 8597: Delete tunnel_key set action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Fri, 9 Sep 2022 01:29:35 +0000 (09:29 +0800)]
selftests/tc-testings: add sample action deleting test case
Test 3872: Delete sample action with valid index
Test a394: Delete sample action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Fri, 9 Sep 2022 01:29:34 +0000 (09:29 +0800)]
selftests/tc-testings: add nat action deleting test case
Test b811: Delete nat action with valid index
Test a521: Delete nat action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Fri, 9 Sep 2022 01:29:33 +0000 (09:29 +0800)]
selftests/tc-testings: add ife action deleting test case
Test a972: Delete ife encode action with valid index
Test 1272: Delete ife encode action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Fri, 9 Sep 2022 01:29:32 +0000 (09:29 +0800)]
selftests/tc-testings: add connmark action deleting test case
Test 6571: Delete connmark action with valid index
Test 3426: Delete connmark action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Fri, 9 Sep 2022 01:29:31 +0000 (09:29 +0800)]
selftests/tc-testings: add selftests for xt action
Test 2029: Add xt action with log-prefix
Test 3562: Replace xt action log-prefix
Test 8291: Delete xt action with valid index
Test 5169: Delete xt action with invalid index
Test 7284: List xt actions
Test 5010: Flush xt actions
Test 8437: Add xt action with duplicate index
Test 2837: Add xt action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Fri, 9 Sep 2022 01:29:30 +0000 (09:29 +0800)]
selftests/tc-testings: add selftests for gate action
Test 5153: Add gate action with priority and sched-entry
Test 7189: Add gate action with base-time
Test a721: Add gate action with cycle-time
Test c029: Add gate action with cycle-time-ext
Test 3719: Replace gate base-time action
Test d821: Delete gate action with valid index
Test 3128: Delete gate action with invalid index
Test 7837: List gate actions
Test 9273: Flush gate actions
Test c829: Add gate action with duplicate index
Test 3043: Add gate action with invalid index
Test 2930: Add gate action with cookie
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Fri, 9 Sep 2022 01:29:29 +0000 (09:29 +0800)]
selftests/tc-testings: add selftests for ctinfo action
Test c826: Add ctinfo action with default setting
Test 0286: Add ctinfo action with dscp
Test 4938: Add ctinfo action with valid cpmark and zone
Test 7593: Add ctinfo action with drop control
Test 2961: Replace ctinfo action zone and action control
Test e567: Delete ctinfo action with valid index
Test 6a91: Delete ctinfo action with invalid index
Test 5232: List ctinfo actions
Test 7702: Flush ctinfo actions
Test 3201: Add ctinfo action with duplicate index
Test 8295: Add ctinfo action with invalid index
Test 3964: Replace ctinfo action with invalid goto_chain control
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 16 Sep 2022 11:15:15 +0000 (12:15 +0100)]
Merge branch '1GbE' of git://git./linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-09-08 (e1000e, igc)
This series contains updates to e1000e and igc drivers.
Li Zhong adds checking and handling for failed PHY register reads for
e1000e.
Sasha removes an unused define for igc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Thu, 8 Sep 2022 13:55:13 +0000 (13:55 +0000)]
net: fs_enet: Fix wrong check in do_pd_setup
Should check of_iomap return value 'fep->fec.fecp' instead of 'fep->fcc.fccp'
Fixes:
976de6a8c304 ("fs_enet: Be an of_platform device when CONFIG_PPC_CPM_NEW_BINDING is set.")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
wangjianli [Thu, 8 Sep 2022 12:43:50 +0000 (20:43 +0800)]
mellanox/mlxsw: fix repeated words in comments
Delete the redundant word 'in'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 8 Sep 2022 12:20:23 +0000 (15:20 +0300)]
iov_iter: use "maxpages" parameter
This was intended to be "maxpages" instead of INT_MAX. There is only
one caller and it passes INT_MAX so this does not affect runtime.
Fixes:
b93235e68921 ("tls: cap the output scatter list to something reasonable")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 16 Sep 2022 09:27:47 +0000 (10:27 +0100)]
Merge branch 'net-amd-static-checker-warnings'
Haoyue Xu says:
====================
net: amd: Cleanup for clearing static warnings
Most static warnings are detected by tools, mainly about:
(1) #1: About the if stament.
(2) #2: About the spelling.
(2) #3: About the indent.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Guofeng Yue [Wed, 7 Sep 2022 06:28:12 +0000 (14:28 +0800)]
net: amd: Switch and case should be at the same indent
Cleaning some static warnings of indent.
Signed-off-by: Guofeng Yue <yueguofeng@hisilicon.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guofeng Yue [Wed, 7 Sep 2022 06:28:11 +0000 (14:28 +0800)]
net: amd: Correct spelling errors
Find some spelling errors:
interupts --> interrupts
lenth --> length
stoped --> stopped
contoller --> controller
Signed-off-by: Guofeng Yue <yueguofeng@hisilicon.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guofeng Yue [Wed, 7 Sep 2022 06:28:10 +0000 (14:28 +0800)]
net: amd: Unified the comparison between pointers and NULL to the same writing
Using the unified way to compare pointers and NULL, which cleans the static
warning.
eg:
if (skb == NULL) --> if (!skb）
if (skb != NULL) --> if (skb)
Signed-off-by: Guofeng Yue <yueguofeng@hisilicon.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jilin Yuan [Wed, 7 Sep 2022 04:01:31 +0000 (12:01 +0800)]
vsock/vmci: fix repeated words in comments
Delete the redundant word 'that'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Tue, 6 Sep 2022 09:55:58 +0000 (11:55 +0200)]
rtnetlink: advertise allmulti counter
Like what was done with IFLA_PROMISCUITY, add IFLA_ALLMULTI to advertise
the allmulti counter.
The flag IFF_ALLMULTI is advertised only if it was directly set by a
userland app.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Fang [Tue, 6 Sep 2022 08:39:23 +0000 (16:39 +0800)]
net: fec: add pm runtime force suspend and resume support
Force mii bus into runtime pm suspend state during device suspends,
since phydev state is already PHY_HALTED, and there is no need to
access mii bus during device suspend state. Then force mii bus into
runtime pm resume state when device resumes.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Thu, 15 Sep 2022 10:41:42 +0000 (12:41 +0200)]
Merge branch 'net-ftgmac100-support-fixed-link'
Tao Ren says:
====================
net: ftgmac100: support fixed link
The patch series adds fixed link support to ftgmac100 driver.
Patch #1 adds fixed link logic into ftgmac100 driver.
Patch #2 enables mac3 controller in Elbert dts: Elbert mac3 is connected
to the onboard switch BCM53134P's IMP_RGMII port directly (no PHY
between BMC MAC and BCM53134P).
====================
Link: https://lore.kernel.org/r/20220907054453.20016-1-rentao.bupt@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tao Ren [Wed, 7 Sep 2022 05:44:53 +0000 (22:44 -0700)]
ARM: dts: aspeed: elbert: Enable mac3 controller
Enable mac3 controller in Elbert dts: Elbert MAC3 is connected to the
BCM53134P onboard switch's IMP_RGMII port directly (fixed link, no PHY
between BMC MAC and BCM53134P).
Note: BMC's mdio0 controller is connected to BCM53134P's MDIO interface,
and the MDIO channel will be enabled later, when BCM53134 is added to
"bcm53xx" DSA driver.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tao Ren [Wed, 7 Sep 2022 05:44:52 +0000 (22:44 -0700)]
net: ftgmac100: support fixed link
Support fixed link in ftgmac100 driver. Fixed link is used on several
Meta OpenBMC platforms, such as Elbert (AST2620) and Wedge400 (AST2520).
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 15 Sep 2022 10:01:04 +0000 (12:01 +0200)]
Merge branch 'mptcp-allow-privileged-operations-from-user-ns-cleanup'
Matthieu Baerts says:
====================
mptcp: allow privileged operations from user ns & cleanup
This series allows privileged Netlink operations from user namespaces. When a
non-root user configures MPTCP endpoints, the memory allocation is now accounted
to this user. See patches 4 and 5.
Apart from that, there are some cleanup:
- Patch 1 adds a macro to improve code readability
- Patch 2 regroups similar checks all together
- Patch 3 uses an explicit boolean instead of a counter to do one more check
====================
Link: https://lore.kernel.org/r/20220906205545.1623193-1-matthieu.baerts@tessares.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Thomas Haller [Tue, 6 Sep 2022 20:55:43 +0000 (22:55 +0200)]
mptcp: account memory allocation in mptcp_nl_cmd_add_addr() to user
Now that non-root users can configure MPTCP endpoints, account
the memory allocation to the user.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Thomas Haller [Tue, 6 Sep 2022 20:55:42 +0000 (22:55 +0200)]
mptcp: allow privileged operations from user namespaces
GENL_ADMIN_PERM checks that the user has CAP_NET_ADMIN in the initial
namespace by calling netlink_capable(). Instead, use GENL_UNS_ADMIN_PERM
which uses netlink_ns_capable(). This checks that the caller has
CAP_NET_ADMIN in the current user namespace.
See also
commit
4a92602aa1cd ("openvswitch: allow management from inside user namespaces")
which introduced this mechanism. See also
commit
5617c6cd6f84 ("nl80211: Allow privileged operations from user namespaces")
which introduced this for nl80211.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Geliang Tang [Tue, 6 Sep 2022 20:55:41 +0000 (22:55 +0200)]
mptcp: add do_check_data_fin to replace copied
This patch adds a new bool variable 'do_check_data_fin' to replace the
original int variable 'copied' in __mptcp_push_pending(), check it to
determine whether to call __mptcp_check_send_data_fin().
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Geliang Tang [Tue, 6 Sep 2022 20:55:40 +0000 (22:55 +0200)]
selftests: mptcp: move prefix tests of addr_nr_ns2 together
Move the fullmesh prefix test of addr_nr_ns2 together with its other
prefix tests.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Matthieu Baerts [Tue, 6 Sep 2022 20:55:39 +0000 (22:55 +0200)]
mptcp: add mptcp_for_each_subflow_safe helper
Similar to mptcp_for_each_subflow(): this is clearer now that the _safe
version is used in multiple places.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Dmitry Torokhov [Tue, 6 Sep 2022 20:49:22 +0000 (13:49 -0700)]
net: phy: spi_ks8895: switch to using gpiod API
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220906204922.3789922-3-dmitry.torokhov@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Dmitry Torokhov [Tue, 6 Sep 2022 20:49:21 +0000 (13:49 -0700)]
net: ks8851: switch to using gpiod API
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220906204922.3789922-2-dmitry.torokhov@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Dmitry Torokhov [Tue, 6 Sep 2022 20:49:20 +0000 (13:49 -0700)]
net: davicom: dm9000: switch to using gpiod API
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220906204922.3789922-1-dmitry.torokhov@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Marc Kleine-Budde [Thu, 15 Sep 2022 07:13:31 +0000 (09:13 +0200)]
Merge patch series "can: support CAN XL"
Oliver Hartkopp <socketcan@hartkopp.net> says:
The CAN with eXtended data Length (CAN XL) is a new CAN protocol with
a 10Mbit/s data transfer with a new physical layer transceiver (for
this data section). CAN XL allows up to 2048 byte of payload and
shares the arbitration principle (11 bit priority) known from
Classical CAN and CAN FD. RTR and 29 bit identifiers are not
implemented in CAN XL.
A short introduction to CAN XL can be found here:
https://www.can-cia.org/can-knowledge/can/can-xl/
https://github.com/linux-can/can-doc/blob/master/presentations/CAN-XL-Intro.pdf
V1: https://lore.kernel.org/all/
20220711183426.96446-1-socketcan@hartkopp.net
V2: Major rework after discussion and feedback on Linux-CAN ML
https://lore.kernel.org/all/
20220714160541.2071-1-socketcan@hartkopp.net
- rework of struct canxl_frame
- CANXL_XLF flag is now the switch between CAN XL and CAN/CANFD
- variable length in r/w operations for CAN XL frames
- write CAN XL frame to raw socket enforces size <-> canxl_frame.len sync
V3: Fix length for CAN XL frames inside the sk_buff
https://lore.kernel.org/all/
20220717132730.30295-1-socketcan@hartkopp.net
- extend the CAN_RAW sockopt to handle fixed/truncated read/write operations
V4: Fix patch 5 (can: raw: add CAN XL support)
https://lore.kernel.org/all/
20220719054204.29061-1-socketcan@hartkopp.net
- fix return value (move 'err = -EINVAL' in raw_sendmsg())
- add CAN XL frame handling in can_rcv()
- change comment for CAN_RAW_XL_[RT]X_DYN definition (allow -> enable)
V5: Remove CAN_RAW_XL_[RT]X_DYN definition again
https://lore.kernel.org/all/
20220719112748.3281-1-socketcan@hartkopp.net
- CAN_RAW_XL_[RT]X_DYN (truncated data) feature is now enabled by default
- use CANXL_MIN_DLEN instead of '1' in canxl_frame definition
- add missing 'err = -EINVAL' initialization in raw_sendmsg())
V6: https://lore.kernel.org/all/
20220724074402.117394-1-socketcan@hartkopp.net
- rework an separate skb identification and length helpers
- add CANFD_FDF flag in all CAN FD frame structures
- simplify patches for infrastructure and raw sockets
- add vxcan support in virtual CAN interface patch
V7: https://lore.kernel.org/all/
20220729154107.1875-1-socketcan@hartkopp.net
- fixed indention as remarked by Marc
- set CANFD_FDF flag when detecting CAN FD frames generated by PF_PACKET
- Allow to use variable CAN XL MTU sizes to enforce real time requirements
on CAN XL segments (e.g. to support of CAN CiA segmentation concept)
V8: https://lore.kernel.org/all/
20220801190010.3344-1-socketcan@hartkopp.net
- fixed typo as remarked by Vincent
- rebased to latest can-next/net-next tree
V9: https://lore.kernel.org/all/
20220912170725.120748-1-socketcan@hartkopp.net
- rebased to latest can-next/net-next tree
- updated and extended public available CAN XL documenatation in cover letter
- renamed struct canxl_frame variable cfx to cxl as suggested by Vincent
- Added Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> tag
Link: https://lore.kernel.org/all/20220912170725.120748-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Mon, 12 Sep 2022 17:07:25 +0000 (19:07 +0200)]
can: raw: add CAN XL support
Enable CAN_RAW sockets to read and write CAN XL frames analogue to the
CAN FD extension (new CAN_RAW_XL_FRAMES sockopt).
A CAN XL network interface is capable to handle Classical CAN, CAN FD and
CAN XL frames. When CAN_RAW_XL_FRAMES is enabled, the CAN_RAW socket checks
whether the addressed CAN network interface is capable to handle the
provided CAN frame.
In opposite to the fixed number of bytes for
- CAN frames (CAN_MTU = sizeof(struct can_frame))
- CAN FD frames (CANFD_MTU = sizeof(struct can_frame))
the number of bytes when reading/writing CAN XL frames depends on the
number of data bytes. For efficiency reasons the length of the struct
canxl_frame is truncated to the needed size for read/write operations.
This leads to a calculated size of CANXL_HDR_SIZE + canxl_frame::len which
is enforced on write() operations and guaranteed on read() operations.
NB: Valid length values are 1 .. 2048 (CANXL_MIN_DLEN .. CANXL_MAX_DLEN).
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-8-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Mon, 12 Sep 2022 17:07:24 +0000 (19:07 +0200)]
can: dev: add CAN XL support to virtual CAN
Make use of new can_skb_get_data_len() helper.
Add support for variable CANXL MTU using the new can_is_canxl_dev_mtu().
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-7-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Mon, 12 Sep 2022 17:07:23 +0000 (19:07 +0200)]
can: canxl: update CAN infrastructure for CAN XL frames
- add new ETH_P_CANXL ethernet protocol type
- update skb checks for CAN XL
- add alloc_canxl_skb() which now needs a data length parameter
- introduce init_can_skb_reserve() to reduce code duplication
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-6-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Mon, 12 Sep 2022 17:07:22 +0000 (19:07 +0200)]
can: canxl: introduce CAN XL data structure
This patch adds defines for data structures and length information for
CAN XL (CAN with eXtended data Length) which can transfer up to 2048
byte inside a single frame.
Notable changes from CAN FD:
- the 11 bit arbitration field is now named 'priority' instead of 'can_id'
(there are no 29 bit identifiers nor RTR frames anymore)
- the data length needs a uint16 value to cover up to 2048 byte
(the length element position is different to struct can[fd]_frame)
- new fields (SDT, AF) and a SEC bit have been introduced
- the virtual CAN interface identifier is not part if the CAN XL frame
struct as this VCID value is stored in struct skbuff (analog to vlan id)
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-5-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Mon, 12 Sep 2022 17:07:21 +0000 (19:07 +0200)]
can: set CANFD_FDF flag in all CAN FD frame structures
To simplify the testing in user space all struct canfd_frame's provided by
the CAN subsystem of the Linux kernel now have the CANFD_FDF flag set in
canfd_frame::flags.
NB: Handcrafted ETH_P_CANFD frames introduced via PF_PACKET socket might
not set this bit correctly. During the check for sufficient headroom in
PF_PACKET sk_buffs the uninitialized CAN sk_buff data structures are filled.
In the case of a CAN FD frame the CANFD_FDF flag is set accordingly.
As the CAN frame content is already zero initialized in alloc_canfd_skb()
the obsolete initialization of cf->flags in the CTU CAN FD driver has been
removed as it would overwrite the already set CANFD_FDF flag.
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-4-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Mon, 12 Sep 2022 17:07:20 +0000 (19:07 +0200)]
can: skb: add skb CAN frame data length helpers
Add two helpers to retrieve the data length from CAN sk_buffs and prepare
the length information to be a uint16 value for the CAN XL support.
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-3-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Mon, 12 Sep 2022 17:07:19 +0000 (19:07 +0200)]
can: skb: unify skb CAN frame identification helpers
Replace open coded checks for sk_buffs containing Classical CAN and
CAN FD frame structures as a preparation for CAN XL support.
With the added length check the unintended processing of CAN XL frames
having the CANXL_XLF bit set can be suppressed even when the skb->len
fits to non CAN XL frames.
The CAN_RAW socket needs a rework to use these helpers. Therefore the
use of these helpers is postponed to the CAN_RAW CAN XL integration.
The J1939 protocol gets a check for Classical CAN frames too.
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-2-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marek Lindner [Wed, 14 Sep 2022 18:37:11 +0000 (20:37 +0200)]
batman-adv: remove unused struct definitions
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
projects / platform / kernel / linux-rpi.git / log