review.tizen.org Git - platform/kernel/linux-starfive.git/log

selftests: netfilter: Run nft_audit.sh in its own netns

Don't mess with the host's firewall ruleset. Since audit logging is not
per-netns, add an initial delay of a second so other selftests' netns
cleanups have a chance to finish.

Fixes: e8dbde59ca3f ("selftests: netfilter: Test nf_tables audit logging")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nf_tables: audit log object reset once per table

When resetting multiple objects at once (via dump request), emit a log
message per table (or filled skb) and resurrect the 'entries' parameter
to contain the number of objects being logged for.

To test the skb exhaustion path, perform some bulk counter and quota
adds in the kselftest.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com> (Audit)
Signed-off-by: Florian Westphal <fw@strlen.de>

neighbor: tracing: Move pin6 inside CONFIG_IPV6=y section

When CONFIG_IPV6=n, and building with W=1:

    In file included from include/trace/define_trace.h:102,
     from include/trace/events/neigh.h:255,
     from net/core/net-traces.c:51:
    include/trace/events/neigh.h: In function ‘trace_event_raw_event_neigh_create’:
    include/trace/events/neigh.h:42:34: error: variable ‘pin6’ set but not used [-Werror=unused-but-set-variable]
       42 |                 struct in6_addr *pin6;
  |                                  ^~~~
    include/trace/trace_events.h:402:11: note: in definition of macro ‘DECLARE_EVENT_CLASS’
      402 |         { assign; }                                                     \
  |           ^~~~~~
    include/trace/trace_events.h:44:30: note: in expansion of macro ‘PARAMS’
       44 |                              PARAMS(assign),                   \
  |                              ^~~~~~
    include/trace/events/neigh.h:23:1: note: in expansion of macro ‘TRACE_EVENT’
       23 | TRACE_EVENT(neigh_create,
  | ^~~~~~~~~~~
    include/trace/events/neigh.h:41:9: note: in expansion of macro ‘TP_fast_assign’
       41 |         TP_fast_assign(
  |         ^~~~~~~~~~~~~~
    In file included from include/trace/define_trace.h:103,
     from include/trace/events/neigh.h:255,
     from net/core/net-traces.c:51:
    include/trace/events/neigh.h: In function ‘perf_trace_neigh_create’:
    include/trace/events/neigh.h:42:34: error: variable ‘pin6’ set but not used [-Werror=unused-but-set-variable]
       42 |                 struct in6_addr *pin6;
  |                                  ^~~~
    include/trace/perf.h:51:11: note: in definition of macro ‘DECLARE_EVENT_CLASS’
       51 |         { assign; }                                                     \
  |           ^~~~~~
    include/trace/trace_events.h:44:30: note: in expansion of macro ‘PARAMS’
       44 |                              PARAMS(assign),                   \
  |                              ^~~~~~
    include/trace/events/neigh.h:23:1: note: in expansion of macro ‘TRACE_EVENT’
       23 | TRACE_EVENT(neigh_create,
  | ^~~~~~~~~~~
    include/trace/events/neigh.h:41:9: note: in expansion of macro ‘TP_fast_assign’
       41 |         TP_fast_assign(
  |         ^~~~~~~~~~~~~~

Indeed, the variable pin6 is declared and initialized unconditionally,
while it is only used and needlessly re-initialized when support for
IPv6 is enabled.

Fix this by dropping the unused variable initialization, and moving the
variable declaration inside the existing section protected by a check
for CONFIG_IPV6.

Fixes: fc651001d2c5ca4f ("neighbor: Add tracepoint to __neigh_create")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net: wwan: iosm: enable runtime pm support for 7560"

Runtime power management support breaks Intel LTE modem where dmesg dump
showes timeout errors:

```
[   72.027442] iosm 0000:01:00.0: msg timeout
[   72.531638] iosm 0000:01:00.0: msg timeout
[   73.035414] iosm 0000:01:00.0: msg timeout
[   73.540359] iosm 0000:01:00.0: msg timeout
```

Furthermore, when shutting down with `poweroff` and modem attached, the
system rebooted instead of powering down as expected. The modem works
again only after power cycling.

Revert runtime power management support for IOSM driver as introduced by
commit e4f5073d53be6c ("net: wwan: iosm: enable runtime pm support for
7560").

Fixes: e4f5073d53be ("net: wwan: iosm: enable runtime pm support for 7560")
Reported-by: Martin <mwolf@adiumentum.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217996
Link: https://lore.kernel.org/r/267abf02-4b60-4a2e-92cd-709e3da6f7d3@gmail.com/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: pktgen: Fix interface flags printing

Device flags are displayed incorrectly:
1) The comparison (i == F_FLOW_SEQ) is always false, because F_FLOW_SEQ
is equal to (1 << FLOW_SEQ_SHIFT) == 2048, and the maximum value
of the 'i' variable is (NR_PKT_FLAG - 1) == 17. It should be compared
with FLOW_SEQ_SHIFT.

2) Similarly to the F_IPSEC flag.

3) Also add spaces to the print end of the string literal "spi:%u"
to prevent the output from merging with the flag that follows.

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.

Fixes: 99c6d3d20d62 ("pktgen: Remove brute-force printing of flags")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'ipsec-2023-10-17' of git://git./linux/kernel/git/klassert/ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2023-10-17

1) Fix a slab-use-after-free in xfrm_policy_inexact_list_reinsert.
   From Dong Chenchen.

2) Fix data-races in the xfrm interfaces dev->stats fields.
   From Eric Dumazet.

3) Fix a data-race in xfrm_gen_index.
   From Eric Dumazet.

4) Fix an inet6_dev refcount underflow.
   From Zhang Changzhong.

5) Check the return value of pskb_trim in esp_remove_trailer
   for esp4 and esp6. From Ma Ke.

6) Fix a data-race in xfrm_lookup_with_ifid.
   From Eric Dumazet.

* tag 'ipsec-2023-10-17' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
  xfrm: fix a data-race in xfrm_lookup_with_ifid()
  net: ipv4: fix return value check in esp_remove_trailer
  net: ipv6: fix return value check in esp_remove_trailer
  xfrm6: fix inet6_dev refcount underflow problem
  xfrm: fix a data-race in xfrm_gen_index()
  xfrm: interface: use DEV_STATS_INC()
  net: xfrm: skip policies marked as dead while reinserting policies
====================

Link: https://lore.kernel.org/r/20231017083723.1364940-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: usb: smsc95xx: Fix an error code in smsc95xx_reset()

Return a negative error code instead of success.

Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/147927f0-9ada-45cc-81ff-75a19dd30b76@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tun: prevent negative ifindex

After commit 956db0a13b47 ("net: warn about attempts to register
negative ifindex") syzbot is able to trigger the following splat.

Negative ifindex are not supported.

WARNING: CPU: 1 PID: 6003 at net/core/dev.c:9596 dev_index_reserve+0x104/0x210
Modules linked in:
CPU: 1 PID: 6003 Comm: syz-executor926 Not tainted 6.6.0-rc4-syzkaller-g19af4a4ed414 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : dev_index_reserve+0x104/0x210
lr : dev_index_reserve+0x100/0x210
sp : ffff800096a878e0
x29: ffff800096a87930 x28: ffff0000d04380d0 x27: ffff0000d04380f8
x26: ffff0000d04380f0 x25: 1ffff00012d50f20 x24: 1ffff00012d50f1c
x23: dfff800000000000 x22: ffff8000929c21c0 x21: 00000000ffffffea
x20: ffff0000d04380e0 x19: ffff800096a87900 x18: ffff800096a874c0
x17: ffff800084df5008 x16: ffff80008051f9c4 x15: 0000000000000001
x14: 1fffe0001a087198 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff0000d41c9bc0 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffff800091763d88 x4 : 0000000000000000 x3 : ffff800084e04748
x2 : 0000000000000001 x1 : 00000000fead71c7 x0 : 0000000000000000
Call trace:
dev_index_reserve+0x104/0x210
register_netdevice+0x598/0x1074 net/core/dev.c:10084
tun_set_iff+0x630/0xb0c drivers/net/tun.c:2850
__tun_chr_ioctl+0x788/0x2af8 drivers/net/tun.c:3118
tun_chr_ioctl+0x38/0x4c drivers/net/tun.c:3403
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl fs/ioctl.c:857 [inline]
__arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:857
__invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155
el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:595
irq event stamp: 11348
hardirqs last enabled at (11347): [<ffff80008a716574>] __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:151 [inline]
hardirqs last enabled at (11347): [<ffff80008a716574>] _raw_spin_unlock_irqrestore+0x38/0x98 kernel/locking/spinlock.c:194
hardirqs last disabled at (11348): [<ffff80008a627820>] el1_dbg+0x24/0x80 arch/arm64/kernel/entry-common.c:436
softirqs last enabled at (11138): [<ffff8000887ca53c>] spin_unlock_bh include/linux/spinlock.h:396 [inline]
softirqs last enabled at (11138): [<ffff8000887ca53c>] release_sock+0x15c/0x1b0 net/core/sock.c:3531
softirqs last disabled at (11136): [<ffff8000887ca41c>] spin_lock_bh include/linux/spinlock.h:356 [inline]
softirqs last disabled at (11136): [<ffff8000887ca41c>] release_sock+0x3c/0x1b0 net/core/sock.c:3518

Fixes: fb7589a16216 ("tun: Add ability to create tun device with given index")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20231016180851.3560092-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: fix excessive TLP and RACK timeouts from HZ rounding

We discovered from packet traces of slow loss recovery on kernels with
the default HZ=250 setting (and min_rtt < 1ms) that after reordering,
when receiving a SACKed sequence range, the RACK reordering timer was
firing after about 16ms rather than the desired value of roughly
min_rtt/4 + 2ms. The problem is largely due to the RACK reorder timer
calculation adding in TCP_TIMEOUT_MIN, which is 2 jiffies. On kernels
with HZ=250, this is 2*4ms = 8ms. The TLP timer calculation has the
exact same issue.

This commit fixes the TLP transmit timer and RACK reordering timer
floor calculation to more closely match the intended 2ms floor even on
kernels with HZ=250. It does this by adding in a new
TCP_TIMEOUT_MIN_US floor of 2000 us and then converting to jiffies,
instead of the current approach of converting to jiffies and then
adding th TCP_TIMEOUT_MIN value of 2 jiffies.

Our testing has verified that on kernels with HZ=1000, as expected,
this does not produce significant changes in behavior, but on kernels
with the default HZ=250 the latency improvement can be large. For
example, our tests show that for HZ=250 kernels at low RTTs this fix
roughly halves the latency for the RACK reorder timer: instead of
mostly firing at 16ms it mostly fires at 8ms.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Fixes: bb4d991a28cc ("tcp: adjust tail loss probe timeout")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231015174700.2206872-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

gve: Do not fully free QPL pages on prefill errors

The prefill function should have only removed the page count bias it
added. Fully freeing the page will cause gve_free_queue_page_list to
free a page the driver no longer owns.

Fixes: 82fd151d38d9 ("gve: Reduce alloc and copy costs in the GQ rx path")
Signed-off-by: Shailend Chand <shailend@google.com>
Link: https://lore.kernel.org/r/20231014014121.2843922-1-shailend@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'for-net-2023-10-13' of git://git./linux/kernel/git/bluetooth/bluetooth

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

- Fix race when opening vhci device
- Avoid memcmp() out of bounds warning
- Correctly bounds check and pad HCI_MON_NEW_INDEX name
- Fix using memcmp when comparing keys
- Ignore error return for hci_devcd_register() in btrtl
- Always check if connection is alive before deleting
- Fix a refcnt underflow problem for hci_conn

* tag 'for-net-2023-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: hci_sock: Correctly bounds check and pad HCI_MON_NEW_INDEX name
  Bluetooth: avoid memcmp() out of bounds warning
  Bluetooth: hci_sock: fix slab oob read in create_monitor_event
  Bluetooth: btrtl: Ignore error return for hci_devcd_register()
  Bluetooth: hci_event: Fix coding style
  Bluetooth: hci_event: Fix using memcmp when comparing keys
  Bluetooth: Fix a refcnt underflow problem for hci_conn
  Bluetooth: hci_sync: always check if connection is alive before deleting
  Bluetooth: Reject connection with the device which has same BD_ADDR
  Bluetooth: hci_event: Ignore NULL link key
  Bluetooth: ISO: Fix invalid context error
  Bluetooth: vhci: Fix race when opening vhci device
====================

Link: https://lore.kernel.org/r/20231014031336.1664558-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: nci: fix possible NULL pointer dereference in send_acknowledge()

Handle memory allocation failure from nci_skb_alloc() (calling
alloc_skb()) to avoid possible NULL pointer dereference.

Reported-by: 黄思聪 <huangsicong@iie.ac.cn>
Fixes: 391d8a2da787 ("NFC: Add NCI over SPI receive")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231013184129.18738-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netlink: Correct offload_xstats size

rtnl_offload_xstats_get_size_hw_s_info_one() conditionalizes the
size-computation for IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED based on whether
or not the device has offload_xstats enabled.

However, rtnl_offload_xstats_fill_hw_s_info_one() is adding the u8 for
that field uncondtionally.

syzkaller triggered a WARNING in rtnl_stats_get due to this:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 754 at net/core/rtnetlink.c:5982 rtnl_stats_get+0x2f4/0x300
Modules linked in:
CPU: 0 PID: 754 Comm: syz-executor148 Not tainted 6.6.0-rc2-g331b78eb12af #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:rtnl_stats_get+0x2f4/0x300 net/core/rtnetlink.c:5982
Code: ff ff 89 ee e8 7d 72 50 ff 83 fd a6 74 17 e8 33 6e 50 ff 4c 89 ef be 02 00 00 00 e8 86 00 fa ff e9 7b fe ff ff e8 1c 6e 50 ff <0f> 0b eb e5 e8 73 79 7b 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffc900006837c0 EFLAGS: 00010293
RAX: ffffffff81cf7f24 RBX: ffff8881015d9000 RCX: ffff888101815a00
RDX: 0000000000000000 RSI: 00000000ffffffa6 RDI: 00000000ffffffa6
RBP: 00000000ffffffa6 R08: ffffffff81cf7f03 R09: 0000000000000001
R10: ffff888101ba47b9 R11: ffff888101815a00 R12: ffff8881017dae00
R13: ffff8881017dad00 R14: ffffc90000683ab8 R15: ffffffff83c1f740
FS: 00007fbc22dbc740(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000046 CR3: 000000010264e003 CR4: 0000000000170ef0
Call Trace:
<TASK>
rtnetlink_rcv_msg+0x677/0x710 net/core/rtnetlink.c:6480
netlink_rcv_skb+0xea/0x1c0 net/netlink/af_netlink.c:2545
netlink_unicast+0x430/0x500 net/netlink/af_netlink.c:1342
netlink_sendmsg+0x4fc/0x620 net/netlink/af_netlink.c:1910
sock_sendmsg+0xa8/0xd0 net/socket.c:730
____sys_sendmsg+0x22a/0x320 net/socket.c:2541
___sys_sendmsg+0x143/0x190 net/socket.c:2595
__x64_sys_sendmsg+0xd8/0x150 net/socket.c:2624
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7fbc22e8d6a9
Code: 5c c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f 37 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc4320e778 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004007d0 RCX: 00007fbc22e8d6a9
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 0000000000000001 R08: 0000000000000000 R09: 00000000004007d0
R10: 0000000000000008 R11: 0000000000000246 R12: 00007ffc4320e898
R13: 00007ffc4320e8a8 R14: 00000000004004a0 R15: 00007fbc22fa5a80
</TASK>
---[ end trace 0000000000000000 ]---

Which didn't happen prior to commit bf9f1baa279f ("net: add dedicated
kmem_cache for typical/small skb->head") as the skb always was large
enough.

Fixes: 0e7788fd7622 ("net: rtnetlink: Add UAPI for obtaining L3 offload xstats")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20231013041448.8229-1-cpaasch@apple.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/smc: return the right falback reason when prefix checks fail

In the smc_listen_work(), if smc_listen_prfx_check() failed,
the real reason: SMC_CLC_DECL_DIFFPREFIX was dropped, and
SMC_CLC_DECL_NOSMCDEV was returned.

Althrough this is also kind of SMC_CLC_DECL_NOSMCDEV, but return
the real reason is much friendly for debugging.

Fixes: e49300a6bf62 ("net/smc: add listen processing for SMC-Rv2")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20231012123729.29307-1-dust.li@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'ovs-selftests'

From: Aaron Conole <aconole@redhat.com>
To: netdev@vger.kernel.org
Cc: dev@openvswitch.org, linux-kselftest@vger.kernel.org,
linux-kernel@vger.kernel.org, Pravin B Shelar <pshelar@ovn.org>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Adrian Moreno <amorenoz@redhat.com>,
Eelco Chaudron <echaudro@redhat.com>,
shuah@kernel.org
Subject: [PATCH net v2 0/4] selftests: openvswitch: Minor fixes for some systems
Date: Wed, 11 Oct 2023 15:49:35 -0400 [thread overview]
Message-ID: <20231011194939.704565-1-aconole@redhat.com> (raw)

A number of corner cases were caught when trying to run the selftests on
older systems. Missed skip conditions, some error cases, and outdated
python setups would all report failures but the issue would actually be
related to some other condition rather than the selftest suite.

Address these individual cases.
====================

Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: openvswitch: Fix the ct_tuple for v4

The ct_tuple v4 data structure decode / encode routines were using
the v6 IP address decode and relying on default encode. This could
cause exceptions during encode / decode depending on how a ct4
tuple would appear in a netlink message.

Caught during code review.

Fixes: e52b07aa1a54 ("selftests: openvswitch: add flow dump support")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: openvswitch: Skip drop testing on older kernels

Kernels that don't have support for openvswitch drop reasons also
won't have the drop counter reasons, so we should skip the test
completely. It previously wasn't possible to build a test case
for this without polluting the datapath, so we introduce a mechanism
to clear all the flows from a datapath allowing us to test for
explicit drop actions, and then clear the flows to build the
original test case.

Fixes: 4242029164d6 ("selftests: openvswitch: add explicit drop testcase")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: openvswitch: Catch cases where the tests are killed

In case of fatal signal, or early abort at least cleanup the current
test case.

Fixes: 25f16c873fb1 ("selftests: add openvswitch selftest suite")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: openvswitch: Add version check for pyroute2

Paolo Abeni reports that on some systems the pyroute2 version isn't
new enough to run the test suite.  Ensure that we support a minimum
version of 0.6 for all cases (which does include the existing ones).
The 0.6.1 version was released in May of 2021, so should be
propagated to most installations at this point.

The alternative that Paolo proposed was to only skip when the
add-flow is being run.  This would be okay for most cases, except
if a future test case is added that needs to do flow dump without
an associated add (just guessing).  In that case, it could also be
broken and we would need additional skip logic anyway.  Just draw
a line in the sand now.

Fixes: 25f16c873fb1 ("selftests: add openvswitch selftest suite")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Closes: https://lore.kernel.org/lkml/8470c431e0930d2ea204a9363a60937289b7fdbe.camel@redhat.com/
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation

Syzbot reported two new paths to hit an internal WARNING using the
new virtio gso type VIRTIO_NET_HDR_GSO_UDP_L4.

    RIP: 0010:skb_checksum_help+0x4a2/0x600 net/core/dev.c:3260
    skb len=64521 gso_size=344
and

    RIP: 0010:skb_warn_bad_offload+0x118/0x240 net/core/dev.c:3262

Older virtio types have historically had loose restrictions, leading
to many entirely impractical fuzzer generated packets causing
problems deep in the kernel stack. Ideally, we would have had strict
validation for all types from the start.

New virtio types can have tighter validation. Limit UDP GSO packets
inserted via virtio to the same limits imposed by the UDP_SEGMENT
socket interface:

1. must use checksum offload
2. checksum offload matches UDP header
3. no more segments than UDP_MAX_SEGMENTS
4. UDP GSO does not take modifier flags, notably SKB_GSO_TCP_ECN

Fixes: 860b7f27b8f7 ("linux/virtio_net.h: Support USO offload in vnet header.")
Reported-by: syzbot+01cdbc31e9c0ae9b33ac@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/0000000000005039270605eb0b7f@google.com/
Reported-by: syzbot+c99d835ff081ca30f986@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/0000000000005426680605eb0b9f@google.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: fix LL2 RX buffer allocation

Driver allocates the LL2 rx buffers from kmalloc()
area to construct the skb using slab_build_skb()

The required size allocation seems to have overlooked
for accounting both skb_shared_info size and device
placement padding bytes which results into the below
panic when doing skb_put() for a standard MTU sized frame.

skbuff: skb_over_panic: text:ffffffffc0b0225f len:1514 put:1514
head:ff3dabceaf39c000 data:ff3dabceaf39c042 tail:0x62c end:0x566
dev:<NULL>
…
skb_panic+0x48/0x4a
skb_put.cold+0x10/0x10
qed_ll2b_complete_rx_packet+0x14f/0x260 [qed]
qed_ll2_rxq_handle_completion.constprop.0+0x169/0x200 [qed]
qed_ll2_rxq_completion+0xba/0x320 [qed]
qed_int_sp_dpc+0x1a7/0x1e0 [qed]

This patch fixes this by accouting skb_shared_info and device
placement padding size bytes when allocating the buffers.

Cc: David S. Miller <davem@davemloft.net>
Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bluetooth: hci_sock: Correctly bounds check and pad HCI_MON_NEW_INDEX name

The code pattern of memcpy(dst, src, strlen(src)) is almost always
wrong. In this case it is wrong because it leaves memory uninitialized
if it is less than sizeof(ni->name), and overflows ni->name when longer.

Normally strtomem_pad() could be used here, but since ni->name is a
trailing array in struct hci_mon_new_index, compilers that don't support
-fstrict-flex-arrays=3 can't tell how large this array is via
__builtin_object_size(). Instead, open-code the helper and use sizeof()
since it will work correctly.

Additionally mark ni->name as __nonstring since it appears to not be a
%NUL terminated C string.

Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Edward AD <twuufnxlz@gmail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Fixes: 18f547f3fc07 ("Bluetooth: hci_sock: fix slab oob read in create_monitor_event")
Link: https://lore.kernel.org/lkml/202310110908.F2639D3276@keescook/
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: avoid memcmp() out of bounds warning

bacmp() is a wrapper around memcpy(), which contain compile-time
checks for buffer overflow. Since the hci_conn_request_evt() also calls
bt_dev_dbg() with an implicit NULL pointer check, the compiler is now
aware of a case where 'hdev' is NULL and treats this as meaning that
zero bytes are available:

In file included from net/bluetooth/hci_event.c:32:
In function 'bacmp',
    inlined from 'hci_conn_request_evt' at net/bluetooth/hci_event.c:3276:7:
include/net/bluetooth/bluetooth.h:364:16: error: 'memcmp' specified bound 6 exceeds source size 0 [-Werror=stringop-overread]
  364 |         return memcmp(ba1, ba2, sizeof(bdaddr_t));
      |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Add another NULL pointer check before the bacmp() to ensure the compiler
understands the code flow enough to not warn about it.  Since the patch
that introduced the warning is marked for stable backports, this one
should also go that way to avoid introducing build regressions.

Fixes: 1ffc6f8cc332 ("Bluetooth: Reject connection with the device which has same BD_ADDR")
Cc: Kees Cook <keescook@chromium.org>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_sock: fix slab oob read in create_monitor_event

When accessing hdev->name, the actual string length should prevail

Reported-by: syzbot+c90849c50ed209d77689@syzkaller.appspotmail.com
Fixes: dcda165706b9 ("Bluetooth: hci_core: Fix build warnings")
Signed-off-by: Edward AD <twuufnxlz@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: btrtl: Ignore error return for hci_devcd_register()

If CONFIG_DEV_COREDUMP was not set, it would return -EOPNOTSUPP for
hci_devcd_register().
In this commit, ignore error return for hci_devcd_register().
Otherwise Bluetooth initialization will be failed.

Fixes: 044014ce85a1 ("Bluetooth: btrtl: Add Realtek devcoredump support")
Cc: stable@vger.kernel.org
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Closes: https://lore.kernel.org/all/ZRyqIn0_qqEFBPdy@debian.me/T/
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_event: Fix coding style

This fixes the following code style problem:

ERROR: that open brace { should be on the previous line
+ if (!bacmp(&hdev->bdaddr, &ev->bdaddr))
+ {

Fixes: 1ffc6f8cc332 ("Bluetooth: Reject connection with the device which has same BD_ADDR")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_event: Fix using memcmp when comparing keys

memcmp is not consider safe to use with cryptographic secrets:

'Do not use memcmp() to compare security critical data, such as
cryptographic secrets, because the required CPU time depends on the
number of equal bytes.'

While usage of memcmp for ZERO_KEY may not be considered a security
critical data, it can lead to more usage of memcmp with pairing keys
which could introduce more security problems.

Fixes: 455c2ff0a558 ("Bluetooth: Fix BR/EDR out-of-band pairing with only initiator data")
Fixes: 33155c4aae52 ("Bluetooth: hci_event: Ignore NULL link key")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Merge tag 'mlx5-fixes-2023-10-12' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2023-10-12

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2023-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Fix VF representors reporting zero counters to "ip -s" command
  net/mlx5e: Don't offload internal port if filter device is out device
  net/mlx5e: Take RTNL lock before triggering netdev notifiers
  net/mlx5e: XDP, Fix XDP_REDIRECT mpwqe page fragment leaks on shutdown
  net/mlx5e: RX, Fix page_pool allocation failure recovery for legacy rq
  net/mlx5e: RX, Fix page_pool allocation failure recovery for striding rq
  net/mlx5: Handle fw tracer change ownership event based on MTRC
  net/mlx5: Bridge, fix peer entry ageing in LAG mode
  net/mlx5: E-switch, register event handler before arming the event
  net/mlx5: Perform DMA operations in the right locations
====================

Link: https://lore.kernel.org/r/20231012195127.129585-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'intel-wired-lan-driver-updates-2023-10-11-i40e-ice'

Jacob Keller says:

====================
Intel Wired LAN Driver Updates 2023-10-11 (i40e, ice)

This series contains fixes for the i40e and ice drivers.

Jesse adds handling to the ice driver which resetis the device when loading
on a crash kernel, preventing stale transactions from causing machine check
exceptions which could prevent capturing crash data.

Mateusz fixes a bug in the ice driver 'Safe mode' logic for handling the
device when the DDP is missing.

Michal fixes a crash when probing the i40e driver in the event that HW
registers are reporting invalid/unexpected values.

The following are changes since commit a950a5921db450c74212327f69950ff03419483a:
net/smc: Fix pos miscalculation in statistics

I'm covering for Tony Nguyen while he's out, and don't have access to create
a pull request branch on his net-queue, so these are sent via mail only.
====================

Link: https://lore.kernel.org/r/20231011233334.336092-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: Fix safe mode when DDP is missing

One thing is broken in the safe mode, that is
ice_deinit_features() is being executed even
that ice_init_features() was not causing stack
trace during pci_unregister_driver().

Add check on the top of the function.

Fixes: 5b246e533d01 ("ice: split probe into smaller functions")
Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/20231011233334.336092-4-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: reset first in crash dump kernels

When the system boots into the crash dump kernel after a panic, the ice
networking device may still have pending transactions that can cause errors
or machine checks when the device is re-enabled. This can prevent the crash
dump kernel from loading the driver or collecting the crash data.

To avoid this issue, perform a function level reset (FLR) on the ice device
via PCIe config space before enabling it on the crash kernel. This will
clear any outstanding transactions and stop all queues and interrupts.
Restore the config space after the FLR, otherwise it was found in testing
that the driver wouldn't load successfully.

The following sequence causes the original issue:
- Load the ice driver with modprobe ice
- Enable SR-IOV with 2 VFs: echo 2 > /sys/class/net/eth0/device/sriov_num_vfs
- Trigger a crash with echo c > /proc/sysrq-trigger
- Load the ice driver again (or let it load automatically) with modprobe ice
- The system crashes again during pcim_enable_device()

Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series")
Reported-by: Vishal Agrawal <vagrawal@redhat.com>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/20231011233334.336092-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

i40e: prevent crash on probe if hw registers have invalid values

The hardware provides the indexes of the first and the last available
queue and VF. From the indexes, the driver calculates the numbers of
queues and VFs. In theory, a faulty device might say the last index is
smaller than the first index. In that case, the driver's calculation
would underflow, it would attempt to write to non-existent registers
outside of the ioremapped range and crash.

I ran into this not by having a faulty device, but by an operator error.
I accidentally ran a QE test meant for i40e devices on an ice device.
The test used 'echo i40e > /sys/...ice PCI device.../driver_override',
bound the driver to the device and crashed in one of the wr32 calls in
i40e_clear_hw.

Add checks to prevent underflows in the calculations of num_queues and
num_vfs. With this fix, the wrong device probing reports errors and
returns a failure without crashing.

Fixes: 838d41d92a90 ("i40e: clear all queues and interrupts")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/20231011233334.336092-2-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'nf-23-10-12' of https://git./linux/kernel/git/netfilter/nf

Florian Westphal says:

====================
netfilter updates for net

Patch 1, from Pablo Neira Ayuso, fixes a performance regression
(since 6.4) when a large pending set update has to be canceled towards
the end of the transaction.

Patch 2 from myself, silences an incorrect compiler warning reported
with a few (older) compiler toolchains.

Patch 3, from Kees Cook, adds __counted_by annotation to
nft_pipapo set backend type.  I took this for net instead of -next
given infra is already in place and no actual code change is made.

Patch 4, from Pablo Neira Ayso, disables timeout resets on
stateful element reset.  The rest should only affect internal object
state, e.g. reset a quota or counter, but not affect a pending timeout.

Patches 5 and 6 fix NULL dereferences in 'inner header' match,
control plane doesn't test for netlink attribute presence before
accessing them. Broken since feature was added in 6.2, fixes from
Xingyuan Mo.

Last patch, from myself, fixes a bogus rule match when skb has
a 0-length mac header, in this case we'd fetch data from network
header instead of canceling rule evaluation.  This is a day 0 bug,
present since nftables was merged in 3.13.

* tag 'nf-23-10-12' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nft_payload: fix wrong mac header matching
  nf_tables: fix NULL pointer dereference in nft_expr_inner_parse()
  nf_tables: fix NULL pointer dereference in nft_inner_init()
  netfilter: nf_tables: do not refresh timeout when resetting element
  netfilter: nf_tables: Annotate struct nft_pipapo_match with __counted_by
  netfilter: nfnetlink_log: silence bogus compiler warning
  netfilter: nf_tables: do not remove elements if set backend implements .abort
====================

Link: https://lore.kernel.org/r/20231012085724.15155-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ti: icssg-prueth: Fix tx_total_bytes count

ICSSG HW stats on TX side considers 8 preamble bytes as data bytes. Due
to this the tx_bytes of ICSSG interface doesn't match the rx_bytes of the
link partner. There is no public errata available yet.

As a workaround to fix this, decrease tx_bytes by 8 bytes for every tx
frame.

Fixes: c1e10d5dc7a1 ("net: ti: icssg-prueth: Add ICSSG Stats")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20231012064626.977466-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

docs: fix info about representor identification

Update the "How are representors identified?" documentation
subchapter. For newer kernels driver should use
SET_NETDEV_DEVLINK_PORT instead of ndo_get_devlink_port()
callback.

Fixes: 7712b3e966ea ("Merge branch 'net-fix-netdev-to-devlink_port-linkage-and-expose-to-user'")
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20231012123144.15768-1-mateusz.polchlopek@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netlink: specs: devlink: fix reply command values

Make sure that the command values used for replies are correct. This is
only affecting generated userspace helpers, no change on kernel code.

Fixes: 7199c86247e9 ("netlink: specs: devlink: add commands that do per-instance dump")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231012115811.298129-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/smc: fix smc clc failed issue when netdevice not in init_net

If the netdevice is within a container and communicates externally
through network technologies such as VxLAN, we won't be able to find
routing information in the init_net namespace. To address this issue,
we need to add a struct net parameter to the smc_ib_find_route function.
This allow us to locate the routing information within the corresponding
net namespace, ensuring the correct completion of the SMC CLC interaction.

Fixes: e5c4744cfb59 ("net/smc: add SMC-Rv2 connection establishment")
Signed-off-by: Albert Huang <huangjie.albert@bytedance.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20231011074851.95280-1-huangjie.albert@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: allow again tcp_disconnect() when threads are waiting

As reported by Tom, .NET and applications build on top of it rely
on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP
socket.

The blamed commit below caused a regression, as such cancellation
can now fail.

As suggested by Eric, this change addresses the problem explicitly
causing blocking I/O operation to terminate immediately (with an error)
when a concurrent disconnect() is executed.

Instead of tracking the number of threads blocked on a given socket,
track the number of disconnect() issued on such socket. If such counter
changes after a blocking operation releasing and re-acquiring the socket
lock, error out the current operation.

Fixes: 4faeee0cf8a5 ("tcp: deny tcp_disconnect() when threads are waiting")
Reported-by: Tom Deseyn <tdeseyn@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886305
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/f3b95e47e3dbed840960548aebaa8d954372db41.1697008693.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: fix over-shifted variable

Since the introduction of the ice driver the code has been
double-shifting the RSS enabling field, because the define already has
shifts in it and can't have the regular pattern of "a << shiftval &
mask" applied.

Most places in the code got it right, but one line was still wrong. Fix
this one location for easy backports to stable. An in-progress patch
fixes the defines to "standard" and will be applied as part of the
regular -next process sometime after this one.

Fixes: d76a60ba7afb ("ice: Add support for VLANs and offloads")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
CC: stable@vger.kernel.org
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231010203101.406248-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: bcm_sf2: Fix possible memory leak in bcm_sf2_mdio_register()

In bcm_sf2_mdio_register(), the class_find_device() will call get_device()
to increment reference count for priv->master_mii_bus->dev if
of_mdio_find_bus() succeeds. If mdiobus_alloc() or mdiobus_register()
fails, it will call get_device() twice without decrement reference count
for the device. And it is the same if bcm_sf2_mdio_register() succeeds but
fails in bcm_sf2_sw_probe(), or if bcm_sf2_sw_probe() succeeds. If the
reference count has not decremented to zero, the dev related resource will
not be freed.

So remove the get_device() in bcm_sf2_mdio_register(), and call
put_device() if mdiobus_alloc() or mdiobus_register() fails and in
bcm_sf2_mdio_unregister() to solve the issue.

And as Simon suggested, unwind from errors for bcm_sf2_mdio_register() and
just return 0 if it succeeds to make it cleaner.

Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231011032419.2423290-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'selftests-fib_tests-fixes-for-multipath-list-receive-tests'

Ido Schimmel says:

====================
selftests: fib_tests: Fixes for multipath list receive tests

Fix two issues in recently added FIB multipath list receive tests.
====================

Link: https://lore.kernel.org/r/20231010132113.3014691-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: fib_tests: Count all trace point invocations

The tests rely on the IPv{4,6} FIB trace points being triggered once for
each forwarded packet. If receive processing is deferred to the
ksoftirqd task these invocations will not be counted and the tests will
fail. Fix by specifying the '-a' flag to avoid perf from filtering on
the mausezahn task.

Before:

# ./fib_tests.sh -t ipv4_mpath_list

IPv4 multipath list receive tests
     TEST: Multipath route hit ratio (.68)                               [FAIL]

# ./fib_tests.sh -t ipv6_mpath_list

IPv6 multipath list receive tests
     TEST: Multipath route hit ratio (.27)                               [FAIL]

After:

# ./fib_tests.sh -t ipv4_mpath_list

IPv4 multipath list receive tests
     TEST: Multipath route hit ratio (1.00)                              [ OK ]

# ./fib_tests.sh -t ipv6_mpath_list

IPv6 multipath list receive tests
     TEST: Multipath route hit ratio (.99)                               [ OK ]

Fixes: 8ae9efb859c0 ("selftests: fib_tests: Add multipath list receive tests")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/netdev/202309191658.c00d8b8-oliver.sang@intel.com/
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Link: https://lore.kernel.org/r/20231010132113.3014691-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: fib_tests: Disable RP filter in multipath list receive test

The test relies on the fib:fib_table_lookup trace point being triggered
once for each forwarded packet. If RP filter is not disabled, the trace
point will be triggered twice for each packet (for source validation and
forwarding), potentially masking actual bugs. Fix by explicitly
disabling RP filter.

Before:

# ./fib_tests.sh -t ipv4_mpath_list

IPv4 multipath list receive tests
TEST: Multipath route hit ratio (1.99) [ OK ]

After:

# ./fib_tests.sh -t ipv4_mpath_list

IPv4 multipath list receive tests
TEST: Multipath route hit ratio (.99) [ OK ]

Fixes: 8ae9efb859c0 ("selftests: fib_tests: Add multipath list receive tests")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/netdev/202309191658.c00d8b8-oliver.sang@intel.com/
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Link: https://lore.kernel.org/r/20231010132113.3014691-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: Fix listen() warning with v4-mapped-v6 address.

syzbot reported a warning [0] introduced by commit c48ef9c4aed3 ("tcp: Fix
bind() regression for v4-mapped-v6 non-wildcard address.").

After the cited commit, a v4 socket's address matches the corresponding
v4-mapped-v6 tb2 in inet_bind2_bucket_match_addr(), not vice versa.

During X.X.X.X -> ::ffff:X.X.X.X order bind()s, the second bind() uses
bhash and conflicts properly without checking bhash2 so that we need not
check if a v4-mapped-v6 sk matches the corresponding v4 address tb2 in
inet_bind2_bucket_match_addr().  However, the repro shows that we need
to check that in a no-conflict case.

The repro bind()s two sockets to the 2-tuples using SO_REUSEPORT and calls
listen() for the first socket:

  from socket import *

  s1 = socket()
  s1.setsockopt(SOL_SOCKET, SO_REUSEPORT, 1)
  s1.bind(('127.0.0.1', 0))

  s2 = socket(AF_INET6)
  s2.setsockopt(SOL_SOCKET, SO_REUSEPORT, 1)
  s2.bind(('::ffff:127.0.0.1', s1.getsockname()[1]))

  s1.listen()

The second socket should belong to the first socket's tb2, but the second
bind() creates another tb2 bucket because inet_bind2_bucket_find() returns
NULL in inet_csk_get_port() as the v4-mapped-v6 sk does not match the
corresponding v4 address tb2.

  bhash2[] -> tb2(::ffff:X.X.X.X) -> tb2(X.X.X.X)

Then, listen() for the first socket calls inet_csk_get_port(), where the
v4 address matches the v4-mapped-v6 tb2 and WARN_ON() is triggered.

To avoid that, we need to check if v4-mapped-v6 sk address matches with
the corresponding v4 address tb2 in inet_bind2_bucket_match().

The same checks are needed in inet_bind2_bucket_addr_match() too, so we
can move all checks there and call it from inet_bind2_bucket_match().

Note that now tb->family is just an address family of tb->(v6_)?rcv_saddr
and not of sockets in the bucket.  This could be refactored later by
defining tb->rcv_saddr as tb->v6_rcv_saddr.s6_addr32[3] and prepending
::ffff: when creating v4 tb2.

[0]:
WARNING: CPU: 0 PID: 5049 at net/ipv4/inet_connection_sock.c:587 inet_csk_get_port+0xf96/0x2350 net/ipv4/inet_connection_sock.c:587
Modules linked in:
CPU: 0 PID: 5049 Comm: syz-executor288 Not tainted 6.6.0-rc2-syzkaller-00018-g2cf0f7156238 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
RIP: 0010:inet_csk_get_port+0xf96/0x2350 net/ipv4/inet_connection_sock.c:587
Code: 7c 24 08 e8 4c b6 8a 01 31 d2 be 88 01 00 00 48 c7 c7 e0 94 ae 8b e8 59 2e a3 f8 2e 2e 2e 31 c0 e9 04 fe ff ff e8 ca 88 d0 f8 <0f> 0b e9 0f f9 ff ff e8 be 88 d0 f8 49 8d 7e 48 e8 65 ca 5a 00 31
RSP: 0018:ffffc90003abfbf0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888026429100 RCX: 0000000000000000
RDX: ffff88807edcbb80 RSI: ffffffff88b73d66 RDI: ffff888026c49f38
RBP: ffff888026c49f30 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff9260f200
R13: ffff888026c49880 R14: 0000000000000000 R15: ffff888026429100
FS:  00005555557d5380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000045ad50 CR3: 0000000025754000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
inet_csk_listen_start+0x155/0x360 net/ipv4/inet_connection_sock.c:1256
__inet_listen_sk+0x1b8/0x5c0 net/ipv4/af_inet.c:217
inet_listen+0x93/0xd0 net/ipv4/af_inet.c:239
__sys_listen+0x194/0x270 net/socket.c:1866
__do_sys_listen net/socket.c:1875 [inline]
__se_sys_listen net/socket.c:1873 [inline]
__x64_sys_listen+0x53/0x80 net/socket.c:1873
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f3a5bce3af9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc1a1c79e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000032
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a5bce3af9
RDX: 00007f3a5bce3af9 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007f3a5bd565f0 R08: 0000000000000006 R09: 0000000000000006
R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000001
R13: 431bde82d7b634db R14: 0000000000000001 R15: 0000000000000001
</TASK>

Fixes: c48ef9c4aed3 ("tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address.")
Reported-by: syzbot+71e724675ba3958edb31@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=71e724675ba3958edb31
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231010013814.70571-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bonding: Return pointer to data after pull on skb

Since 429e3d123d9a ("bonding: Fix extraction of ports from the packet
headers"), header offsets used to compute a hash in bond_xmit_hash() are
relative to skb->data and not skb->head. If the tail of the header buffer
of an skb really needs to be advanced and the operation is successful, the
pointer to the data must be returned (and not a pointer to the head of the
buffer).

Fixes: 429e3d123d9a ("bonding: Fix extraction of ports from the packet headers")
Signed-off-by: Jiri Wiesner <jwiesner@suse.de>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xfrm: fix a data-race in xfrm_lookup_with_ifid()

syzbot complains about a race in xfrm_lookup_with_ifid() [1]

When preparing commit 0a9e5794b21e ("xfrm: annotate data-race
around use_time") I thought xfrm_lookup_with_ifid() was modifying
a still private structure.

[1]
BUG: KCSAN: data-race in xfrm_lookup_with_ifid / xfrm_lookup_with_ifid

write to 0xffff88813ea41108 of 8 bytes by task 8150 on cpu 1:
xfrm_lookup_with_ifid+0xce7/0x12d0 net/xfrm/xfrm_policy.c:3218
xfrm_lookup net/xfrm/xfrm_policy.c:3270 [inline]
xfrm_lookup_route+0x3b/0x100 net/xfrm/xfrm_policy.c:3281
ip6_dst_lookup_flow+0x98/0xc0 net/ipv6/ip6_output.c:1246
send6+0x241/0x3c0 drivers/net/wireguard/socket.c:139
wg_socket_send_skb_to_peer+0xbd/0x130 drivers/net/wireguard/socket.c:178
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

write to 0xffff88813ea41108 of 8 bytes by task 15867 on cpu 0:
xfrm_lookup_with_ifid+0xce7/0x12d0 net/xfrm/xfrm_policy.c:3218
xfrm_lookup net/xfrm/xfrm_policy.c:3270 [inline]
xfrm_lookup_route+0x3b/0x100 net/xfrm/xfrm_policy.c:3281
ip6_dst_lookup_flow+0x98/0xc0 net/ipv6/ip6_output.c:1246
send6+0x241/0x3c0 drivers/net/wireguard/socket.c:139
wg_socket_send_skb_to_peer+0xbd/0x130 drivers/net/wireguard/socket.c:178
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

value changed: 0x00000000651cd9d1 -> 0x00000000651cd9d2

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 15867 Comm: kworker/u4:58 Not tainted 6.6.0-rc4-syzkaller-00016-g5e62ed3b1c8a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023
Workqueue: wg-kex-wg2 wg_packet_handshake_send_worker

Fixes: 0a9e5794b21e ("xfrm: annotate data-race around use_time")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Merge tag 'net-6.6-rc6' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from CAN and BPF.

  We have a regression in TC currently under investigation, otherwise
  the things that stand off most are probably the TCP and AF_PACKET
  fixes, with both issues coming from 6.5.

  Previous releases - regressions:

   - af_packet: fix fortified memcpy() without flex array.

   - tcp: fix crashes trying to free half-baked MTU probes

   - xdp: fix zero-size allocation warning in xskq_create()

   - can: sja1000: always restart the tx queue after an overrun

   - eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp

   - eth: nfp: avoid rmmod nfp crash issues

   - eth: octeontx2-pf: fix page pool frag allocation warning

  Previous releases - always broken:

   - mctp: perform route lookups under a RCU read-side lock

   - bpf: s390: fix clobbering the caller's backchain in the trampoline

   - phy: lynx-28g: cancel the CDR check work item on the remove path

   - dsa: qca8k: fix qca8k driver for Turris 1.x

   - eth: ravb: fix use-after-free issue in ravb_tx_timeout_work()

   - eth: ixgbe: fix crash with empty VF macvlan list"

* tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
  rswitch: Fix imbalance phy_power_off() calling
  rswitch: Fix renesas_eth_sw_remove() implementation
  octeontx2-pf: Fix page pool frag allocation warning
  nfc: nci: assert requested protocol is valid
  af_packet: Fix fortified memcpy() without flex array.
  net: tcp: fix crashes trying to free half-baked MTU probes
  net/smc: Fix pos miscalculation in statistics
  nfp: flower: avoid rmmod nfp crash issues
  net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read
  ethtool: Fix mod state of verbose no_mask bitset
  net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()
  mctp: perform route lookups under a RCU read-side lock
  net: skbuff: fix kernel-doc typos
  s390/bpf: Fix unwinding past the trampoline
  s390/bpf: Fix clobbering the caller's backchain in the trampoline
  net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp
  net/smc: Fix dependency of SMC on ISM
  ixgbe: fix crash with empty VF macvlan list
  net/mlx5e: macsec: use update_pn flag instead of PN comparation
  net: phy: mscc: macsec: reject PN update requests
  ...

Merge tag 'soc-fixes-6.6-2' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"AngeloGioacchino Del Regno is stepping in as co-maintainer for the
  MediaTek SoC platform and starts by sending some dts fixes for the
  mt8195 platform that had been pending for a while.

  On the ixp4xx platform, Krzysztof Halasa steps down as co-maintainer,
  reflecting that Linus Walleij has been handling this on his own for
  the past few years.

  Generic RISC-V kernels are now marked as incompatible with the RZ/Five
  platform that requires custom hacks both for managing its DMA bounce
  buffers and for addressing low virtual memory.

Finally, there is one bugfix for the AMDTEE firmware driver to prevent
a use-after-free bug"

* tag 'soc-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  IXP4xx MAINTAINERS entries
  arm64: dts: mediatek: mt8195: Set DSU PMU status to fail
  arm64: dts: mediatek: fix t-phy unit name
  arm64: dts: mediatek: mt8195-demo: update and reorder reserved memory regions
  arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB
  MAINTAINERS: Add Angelo as MediaTek SoC co-maintainer
  soc: renesas: Make ARCH_R9A07G043 (riscv version) depend on NONPORTABLE
  tee: amdtee: fix use-after-free vulnerability in amdtee_close_session

Merge tag 'pmdomain-v6.6-rc1-2' of git://git./linux/kernel/git/ulfh/linux-pm

Pull pmdomain fix from Ulf Hansson:

- imx: scu-pd: Correct the DMA2 channel

* tag 'pmdomain-v6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: scu-pd: correct DMA2 channel

net/mlx5e: Fix VF representors reporting zero counters to "ip -s" command

Although vf_vport entry of struct mlx5e_stats is never updated, its
values are mistakenly copied to the caller structure in the VF
representor .ndo_get_stat_64 callback mlx5e_rep_get_stats(). Remove
redundant entry and use the updated one, rep_stats, instead.

Fixes: 64b68e369649 ("net/mlx5: Refactor and expand rep vport stat group")
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Don't offload internal port if filter device is out device

In the cited commit, if the routing device is ovs internal port, the
out device is set to uplink, and packets go out after encapsulation.

If filter device is uplink, it can trigger the following syndrome:
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:803:(pid 3966): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xcdb051), err(-22)

Fix this issue by not offloading internal port if filter device is out
device. In this case, packets are not forwarded to the root table to
be processed, the termination table is used instead to forward them
from uplink to uplink.

Fixes: 100ad4e2d758 ("net/mlx5e: Offload internal port as encap route device")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Take RTNL lock before triggering netdev notifiers

Hold RTNL lock when calling xdp_set_features() with a registered netdev,
as the call triggers the netdev notifiers. This could happen when
switching from nic profile to uplink representor for example.

Similar logic which fixed a similar scenario was previously introduced in
the following commit:
commit 72cc65497065 net/mlx5e: Take RTNL lock when needed before calling
xdp_set_features().

This fixes the following assertion and warning call trace:

RTNL: assertion failed at net/core/dev.c (1961)
WARNING: CPU: 13 PID: 2529 at net/core/dev.c:1961
call_netdevice_notifiers_info+0x7c/0x80
Modules linked in: rpcrdma rdma_ucm ib_iser libiscsi
scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib
ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink
nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5
auth_rpcgss oid_registry overlay mlx5_core zram zsmalloc fuse
CPU: 13 PID: 2529 Comm: devlink Not tainted
6.5.0_for_upstream_min_debug_2023_09_07_20_04 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:call_netdevice_notifiers_info+0x7c/0x80
Code: 8f ff 80 3d 77 0d 16 01 00 75 c5 ba a9 07 00 00 48
c7 c6 c4 bb 0d 82 48 c7 c7 18 c8 06 82 c6 05 5b 0d 16 01 01 e8 44 f6 8c
ff <0f> 0b eb a2 0f 1f 44 00 00 55 48 89 e5 41 54 48 83 e4 f0 48 83 ec
RSP: 0018:ffff88819930f7f0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff8309f740 RCX: 0000000000000027
RDX: ffff88885fb5b5c8 RSI: 0000000000000001 RDI: ffff88885fb5b5c0
RBP: 0000000000000028 R08: ffff88887ffabaa8 R09: 0000000000000003
R10: ffff88887fecbac0 R11: ffff88887ff7bac0 R12: ffff88819930f810
R13: ffff88810b7fea40 R14: ffff8881154e8fd8 R15: ffff888107e881a0
FS: 00007f3ad248f800(0000) GS:ffff88885fb40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000563b85f164e0 CR3: 0000000113b5c006 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __warn+0x79/0x120
? call_netdevice_notifiers_info+0x7c/0x80
? report_bug+0x17c/0x190
? handle_bug+0x3c/0x60
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? call_netdevice_notifiers_info+0x7c/0x80
call_netdevice_notifiers+0x2e/0x50
mlx5e_set_xdp_feature+0x21/0x50 [mlx5_core]
mlx5e_build_rep_params+0x97/0x130 [mlx5_core]
mlx5e_init_ul_rep+0x9f/0x100 [mlx5_core]
mlx5e_netdev_init_profile+0x76/0x110 [mlx5_core]
mlx5e_netdev_attach_profile+0x1f/0x90 [mlx5_core]
mlx5e_netdev_change_profile+0x92/0x160 [mlx5_core]
mlx5e_vport_rep_load+0x329/0x4a0 [mlx5_core]
mlx5_esw_offloads_rep_load+0x9e/0xf0 [mlx5_core]
esw_offloads_enable+0x4bc/0xe90 [mlx5_core]
mlx5_eswitch_enable_locked+0x3c8/0x570 [mlx5_core]
? kmalloc_trace+0x25/0x80
mlx5_devlink_eswitch_mode_set+0x224/0x680 [mlx5_core]
? devlink_get_from_attrs_lock+0x9e/0x110
devlink_nl_cmd_eswitch_set_doit+0x60/0xe0
genl_family_rcv_msg_doit+0xd0/0x120
genl_rcv_msg+0x180/0x2b0
? devlink_get_from_attrs_lock+0x110/0x110
? devlink_nl_cmd_eswitch_get_doit+0x290/0x290
? devlink_pernet_pre_exit+0xf0/0xf0
? genl_family_rcv_msg_dumpit+0xf0/0xf0
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1fc/0x2c0
netlink_sendmsg+0x232/0x4a0
sock_sendmsg+0x38/0x60
? _copy_from_user+0x2a/0x60
__sys_sendto+0x110/0x160
? handle_mm_fault+0x161/0x260
? do_user_addr_fault+0x276/0x620
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f3ad231340a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3
0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f
05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffd70aad4b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000c36b00 RCX:00007f3ad231340a
RDX: 0000000000000038 RSI: 0000000000c36b00 RDI: 0000000000000003
RBP: 0000000000c36910 R08: 00007f3ad2625200 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
</TASK>
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------

Fixes: 4d5ab0ad964d ("net/mlx5e: take into account device reconfiguration for xdp_features flag")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: XDP, Fix XDP_REDIRECT mpwqe page fragment leaks on shutdown

When mlx5e_xdp_xmit is called without the XDP_XMIT_FLUSH set it is
possible that it leaves a mpwqe session open. That is ok during runtime:
the session will be closed on the next call to mlx5e_xdp_xmit. But
having a mpwqe session still open at XDP sq close time is problematic:
the pc counter is not updated before flushing the contents of the
xdpi_fifo. This results in leaking page fragments.

The fix is to always close the mpwqe session at the end of
mlx5e_xdp_xmit, regardless of the XDP_XMIT_FLUSH flag being set or not.

Fixes: 5e0d2eef771e ("net/mlx5e: XDP, Support Enhanced Multi-Packet TX WQE")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: RX, Fix page_pool allocation failure recovery for legacy rq

When a page allocation fails during refill in mlx5e_refill_rx_wqes, the
page will be released again on the next refill call. This triggers the
page_pool negative page fragment count warning below:

[  338.326070] WARNING: CPU: 4 PID: 0 at include/net/page_pool/helpers.h:130 mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core]
  ...
[  338.328993] RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core]
[  338.329094] Call Trace:
[  338.329097]  <IRQ>
[  338.329100]  ? __warn+0x7d/0x120
[  338.329105]  ? mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core]
[  338.329173]  ? report_bug+0x155/0x180
[  338.329179]  ? handle_bug+0x3c/0x60
[  338.329183]  ? exc_invalid_op+0x13/0x60
[  338.329187]  ? asm_exc_invalid_op+0x16/0x20
[  338.329192]  ? mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core]
[  338.329259]  mlx5e_post_rx_wqes+0x210/0x5a0 [mlx5_core]
[  338.329327]  ? mlx5e_poll_rx_cq+0x88/0x6f0 [mlx5_core]
[  338.329394]  mlx5e_napi_poll+0x127/0x6b0 [mlx5_core]
[  338.329461]  __napi_poll+0x25/0x1a0
[  338.329465]  net_rx_action+0x28a/0x300
[  338.329468]  __do_softirq+0xcd/0x279
[  338.329473]  irq_exit_rcu+0x6a/0x90
[  338.329477]  common_interrupt+0x82/0xa0
[  338.329482]  </IRQ>

This patch fixes the legacy rq case by releasing all allocated fragments
and then setting the skip flag on all released fragments. It is
important to note that the number of released fragments will be higher
than the number of allocated fragments when an allocation error occurs.

Fixes: 3f93f82988bc ("net/mlx5e: RX, Defer page release in legacy rq for better recycling")
Tested-by: Chris Mason <clm@fb.com>
Reported-by: Chris Mason <clm@fb.com>
Closes: https://lore.kernel.org/netdev/117FF31A-7BE0-4050-B2BB-E41F224FF72F@meta.com
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: RX, Fix page_pool allocation failure recovery for striding rq

When a page allocation fails during refill in mlx5e_post_rx_mpwqes, the
page will be released again on the next refill call. This triggers the
page_pool negative page fragment count warning below:

[ 2436.447717] WARNING: CPU: 1 PID: 2419 at include/net/page_pool/helpers.h:130 mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core]
...
[ 2436.447895] RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core]
[ 2436.447991] Call Trace:
[ 2436.447975]  mlx5e_post_rx_mpwqes+0x1d5/0xcf0 [mlx5_core]
[ 2436.447994]  <IRQ>
[ 2436.447996]  ? __warn+0x7d/0x120
[ 2436.448009]  ? mlx5e_handle_rx_cqe_mpwrq+0x109/0x1d0 [mlx5_core]
[ 2436.448002]  ? mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core]
[ 2436.448044]  ? mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core]
[ 2436.448061]  ? report_bug+0x155/0x180
[ 2436.448065]  ? handle_bug+0x36/0x70
[ 2436.448067]  ? exc_invalid_op+0x13/0x60
[ 2436.448070]  ? asm_exc_invalid_op+0x16/0x20
[ 2436.448079]  mlx5e_napi_poll+0x122/0x6b0 [mlx5_core]
[ 2436.448077]  ? mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core]
[ 2436.448113]  ? generic_exec_single+0x35/0x100
[ 2436.448117]  __napi_poll+0x25/0x1a0
[ 2436.448120]  net_rx_action+0x28a/0x300
[ 2436.448122]  __do_softirq+0xcd/0x279
[ 2436.448126]  irq_exit_rcu+0x6a/0x90
[ 2436.448128]  sysvec_apic_timer_interrupt+0x6e/0x90
[ 2436.448130]  </IRQ>

This patch fixes the striding rq case by setting the skip flag on all
the wqe pages that were expected to have new pages allocated.

Fixes: 4c2a13236807 ("net/mlx5e: RX, Defer page release in striding rq for better recycling")
Tested-by: Chris Mason <clm@fb.com>
Reported-by: Chris Mason <clm@fb.com>
Closes: https://lore.kernel.org/netdev/117FF31A-7BE0-4050-B2BB-E41F224FF72F@meta.com
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Handle fw tracer change ownership event based on MTRC

Currently, whenever fw issues a change ownership event, the PF that owns
the fw tracer drops its ownership directly and the other PFs try to pick
up the ownership via what MTRC register suggests.

In some cases, driver releases the ownership of the tracer and reacquires
it later on. Whenever the driver releases ownership of the tracer, fw
issues a change ownership event. This event can be delayed and come after
driver has reacquired ownership of the tracer. Thus the late event will
trigger the tracer owner PF to release the ownership again and lead to a
scenario where no PF is owning the tracer.

To prevent the scenario described above, when handling a change
ownership event, do not drop ownership of the tracer directly, instead
read the fw MTRC register to retrieve the up-to-date owner of the tracer
and set it accordingly in driver level.

Fixes: f53aaa31cce7 ("net/mlx5: FW tracer, implement tracer logic")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Bridge, fix peer entry ageing in LAG mode

With current implementation in single FDB LAG mode all packets are
processed by eswitch 0 rules. As such, 'peer' FDB entries receive the
packets for rules of other eswitches and are responsible for updating the
main entry by sending SWITCHDEV_FDB_ADD_TO_BRIDGE notification from their
background update wq task. However, this introduces a race condition when
non-zero eswitch instance decides to delete a FDB entry, sends
SWITCHDEV_FDB_DEL_TO_BRIDGE notification, but another eswitch's update task
refreshes the same entry concurrently while its async delete work is still
pending on the workque. In such case another SWITCHDEV_FDB_ADD_TO_BRIDGE
event may be generated and entry will remain stuck in FDB marked as
'offloaded' since no more SWITCHDEV_FDB_DEL_TO_BRIDGE notifications are
sent for deleting the peer entries.

Fix the issue by synchronously marking deleted entries with
MLX5_ESW_BRIDGE_FLAG_DELETED flag and skipping them in background update
job.

Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: E-switch, register event handler before arming the event

Currently, mlx5 is registering event handler for vport context change
event some time after arming the event. this can lead to missing an
event, which will result in wrong rules in the FDB.
Hence, register the event handler before arming the event.

This solution is valid since FW is sending vport context change event
only on vports which SW armed, and SW arming the vport when enabling
it, which is done after the FDB has been created.

Fixes: 6933a9379559 ("net/mlx5: E-Switch, Use async events chain")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Perform DMA operations in the right locations

The cited patch change mlx5 driver so that during probe DMA
operations were performed before pci_enable_device(), and during
teardown DMA operations were performed after pci_disable_device().
DMA operations require PCI to be enabled. Hence, The above leads to
the following oops in PPC systems[1].

On s390x systems, as reported by Niklas Schnelle, this is a problem
because mlx5_pci_init() is where the DMA and coherent mask is set but
mlx5_cmd_init() already does a dma_alloc_coherent(). Thus a DMA
allocation is done during probe before the correct mask is set. This
causes probe to fail initialization of the cmdif SW structs on s390x
after that is converted to the common dma-iommu code. This is because on
s390x DMA addresses below 4 GiB are reserved on current machines and
unlike the old s390x specific DMA API implementation common code
enforces DMA masks.

Fix it by performing the DMA operations during probe after
pci_enable_device() and after the dma mask is set,
and during teardown before pci_disable_device().

[1]
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: xt_MASQUERADE nf_conntrack_netlink
nfnetlink xfrm_user iptable_nat xt_addrtype xt_conntrack nf_nat
nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 netconsole rpcsec_gss_krb5
auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser ib_umad
rdma_cm ib_ipoib iw_cm libiscsi scsi_transport_iscsi ib_cm ib_uverbs
ib_core mlx5_core(-) ptp pps_core fuse vmx_crypto crc32c_vpmsum [last
unloaded: mlx5_ib]
CPU: 1 PID: 8937 Comm: modprobe Not tainted 6.5.0-rc3_for_upstream_min_debug_2023_07_31_16_02 #1
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
NIP:  c000000000423388 LR: c0000000001e733c CTR: c0000000001e4720
REGS: c0000000055636d0 TRAP: 0380   Not tainted (6.5.0-rc3_for_upstream_min_debug_2023_07_31_16_02)
MSR:  8000000000009033  CR: 24008884  XER: 20040000
CFAR: c0000000001e7338 IRQMASK: 0
NIP [c000000000423388] __free_pages+0x28/0x160
LR [c0000000001e733c] dma_direct_free+0xac/0x190
Call Trace:
[c000000005563970] [5deadbeef0000100] 0x5deadbeef0000100 (unreliable)
[c0000000055639b0] [c0000000003d46cc] kfree+0x7c/0x150
[c000000005563a40] [c0000000001e47c8] dma_free_attrs+0xa8/0x1a0
[c000000005563aa0] [c008000000d0064c] mlx5_cmd_cleanup+0xa4/0x100 [mlx5_core]
[c000000005563ad0] [c008000000cf629c] mlx5_mdev_uninit+0xf4/0x140 [mlx5_core]
[c000000005563b00] [c008000000cf6448] remove_one+0x160/0x1d0 [mlx5_core]
[c000000005563b40] [c000000000958540] pci_device_remove+0x60/0x110
[c000000005563b80] [c000000000a35e80] device_remove+0x70/0xd0
[c000000005563bb0] [c000000000a37a38] device_release_driver_internal+0x2a8/0x330
[c000000005563c00] [c000000000a37b8c] driver_detach+0x8c/0x160
[c000000005563c40] [c000000000a35350] bus_remove_driver+0x90/0x110
[c000000005563c80] [c000000000a38948] driver_unregister+0x48/0x90
[c000000005563cf0] [c000000000957e38] pci_unregister_driver+0x38/0x150
[c000000005563d40] [c008000000eb6140] mlx5_cleanup+0x38/0x90 [mlx5_core]

Fixes: 06cd555f73ca ("net/mlx5: split mlx5_cmd_init() to probe and reload routines")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Merge tag 'pinctrl-v6.6-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
"Some pin control fixes for v6.6 which have been stacking up in my
  tree.

  Dmitry's fix to some locking in the core is the most substantial, that
  was a really neat fix.

  The rest is the usual assorted spray of minor driver fixes.

   - Drop some minor code causing warnings in the Lantiq driver

   - Fix out of bounds write in the Nuvoton driver

   - Fix lost IRQs with CONFIG_PM in the Starfive driver

   - Fix a locking issue in find_pinctrl()

   - Revert a regressive Tegra debug patch

   - Fix the Renesas RZN1 pin muxing"

* tag 'pinctrl-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: renesas: rzn1: Enable missing PINMUX
  Revert "pinctrl: tegra: Add support to display pin function"
  pinctrl: avoid unsafe code pattern in find_pinctrl()
  pinctrl: starfive: jh7110: Add system pm ops to save and restore context
  pinctrl: starfive: jh7110: Fix failure to set irq after CONFIG_PM is enabled
  pinctrl: nuvoton: wpcm450: fix out of bounds write
  pinctrl: lantiq: Remove unsued declaration ltq_pinctrl_unregister()

IXP4xx MAINTAINERS entries

Update MAINTAINERS entries for Intel IXP4xx SoCs.

Linus has been handling all IXP4xx stuff since 2019 or so.

Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Deepak Saxena <dsaxena@plexity.net>
Link: https://lore.kernel.org/r/m3ttqxu4ru.fsf@t19.piap.pl
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge branch 'rswitch-fix-issues-on-specific-conditions'

Yoshihiro Shimoda says:

====================
rswitch: Fix issues on specific conditions

This patch series fix some issues of rswitch driver on specific
condtions.
====================

Link: https://lore.kernel.org/r/20231010124858.183891-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

rswitch: Fix imbalance phy_power_off() calling

The phy_power_off() should not be called if phy_power_on() failed.
So, add a condition .power_count before calls phy_power_off().

Fixes: 5cb630925b49 ("net: renesas: rswitch: Add phy_power_{on,off}() calling")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

rswitch: Fix renesas_eth_sw_remove() implementation

Fix functions calling order and a condition in renesas_eth_sw_remove().
Otherwise, kernel NULL pointer dereference happens from phy_stop() if
a net device opens.

Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netfilter: nft_payload: fix wrong mac header matching

mcast packets get looped back to the local machine.
Such packets have a 0-length mac header, we should treat
this like "mac header not set" and abort rule evaluation.

As-is, we just copy data from the network header instead.

Fixes: 96518518cc41 ("netfilter: add nftables")
Reported-by: Blažej Krajňák <krajnak@levonet.sk>
Signed-off-by: Florian Westphal <fw@strlen.de>

nf_tables: fix NULL pointer dereference in nft_expr_inner_parse()

We should check whether the NFTA_EXPR_NAME netlink attribute is present
before accessing it, otherwise a null pointer deference error will occur.

Call Trace:
<TASK>
dump_stack_lvl+0x4f/0x90
print_report+0x3f0/0x620
kasan_report+0xcd/0x110
__asan_load2+0x7d/0xa0
nla_strcmp+0x2f/0x90
__nft_expr_type_get+0x41/0xb0
nft_expr_inner_parse+0xe3/0x200
nft_inner_init+0x1be/0x2e0
nf_tables_newrule+0x813/0x1230
nfnetlink_rcv_batch+0xec3/0x1170
nfnetlink_rcv+0x1e4/0x220
netlink_unicast+0x34e/0x4b0
netlink_sendmsg+0x45c/0x7e0
__sys_sendto+0x355/0x370
__x64_sys_sendto+0x84/0xa0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching")
Signed-off-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>

nf_tables: fix NULL pointer dereference in nft_inner_init()

We should check whether the NFTA_INNER_NUM netlink attribute is present
before accessing it, otherwise a null pointer deference error will occur.

Call Trace:
dump_stack_lvl+0x4f/0x90
print_report+0x3f0/0x620
kasan_report+0xcd/0x110
__asan_load4+0x84/0xa0
nft_inner_init+0x128/0x2e0
nf_tables_newrule+0x813/0x1230
nfnetlink_rcv_batch+0xec3/0x1170
nfnetlink_rcv+0x1e4/0x220
netlink_unicast+0x34e/0x4b0
netlink_sendmsg+0x45c/0x7e0
__sys_sendto+0x355/0x370
__x64_sys_sendto+0x84/0xa0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching")
Signed-off-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nf_tables: do not refresh timeout when resetting element

The dump and reset command should not refresh the timeout, this command
is intended to allow users to list existing stateful objects and reset
them, element expiration should be refresh via transaction instead with
a specific command to achieve this, otherwise this is entering combo
semantics that will be hard to be undone later (eg. a user asking to
retrieve counters but _not_ requiring to refresh expiration).

Fixes: 079cd633219d ("netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nf_tables: Annotate struct nft_pipapo_match with __counted_by

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct nft_pipapo_match.

Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netfilter-devel@vger.kernel.org
Cc: coreteam@netfilter.org
Cc: netdev@vger.kernel.org
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nfnetlink_log: silence bogus compiler warning

net/netfilter/nfnetlink_log.c:800:18: warning: variable 'ctinfo' is uninitialized

The warning is bogus, the variable is only used if ct is non-NULL and
always initialised in that case. Init to 0 too to silence this.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309100514.ndBFebXN-lkp@intel.com/
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nf_tables: do not remove elements if set backend implements .abort

pipapo set backend maintains two copies of the datastructure, removing
the elements from the copy that is going to be discarded slows down
the abort path significantly, from several minutes to few seconds after
this patch.

Fixes: 212ed75dc5fb ("netfilter: nf_tables: integrate pipapo into commit protocol")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>

octeontx2-pf: Fix page pool frag allocation warning

Since page pool param's "order" is set to 0, will result
in below warn message if interface is configured with higher
rx buffer size.

Steps to reproduce the issue.
1. devlink dev param set pci/0002:04:00.0 name receive_buffer_size \
   value 8196 cmode runtime
2. ifconfig eth0 up

[   19.901356] ------------[ cut here ]------------
[   19.901361] WARNING: CPU: 11 PID: 12331 at net/core/page_pool.c:567 page_pool_alloc_frag+0x3c/0x230
[   19.901449] pstate: 82401009 (Nzcv daif +PAN -UAO +TCO -DIT +SSBS BTYPE=--)
[   19.901451] pc : page_pool_alloc_frag+0x3c/0x230
[   19.901453] lr : __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf]
[   19.901460] sp : ffff80000f66b970
[   19.901461] x29: ffff80000f66b970 x28: 0000000000000000 x27: 0000000000000000
[   19.901464] x26: ffff800000d15b68 x25: ffff000195b5c080 x24: ffff0002a5a32dc0
[   19.901467] x23: ffff0001063c0878 x22: 0000000000000100 x21: 0000000000000000
[   19.901469] x20: 0000000000000000 x19: ffff00016f781000 x18: 0000000000000000
[   19.901472] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[   19.901474] x14: 0000000000000000 x13: ffff0005ffdc9c80 x12: 0000000000000000
[   19.901477] x11: ffff800009119a38 x10: 4c6ef2e3ba300519 x9 : ffff800000d13844
[   19.901479] x8 : ffff0002a5a33cc8 x7 : 0000000000000030 x6 : 0000000000000030
[   19.901482] x5 : 0000000000000005 x4 : 0000000000000000 x3 : 0000000000000a20
[   19.901484] x2 : 0000000000001080 x1 : ffff80000f66b9d4 x0 : 0000000000001000
[   19.901487] Call trace:
[   19.901488]  page_pool_alloc_frag+0x3c/0x230
[   19.901490]  __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf]
[   19.901494]  otx2_rq_aura_pool_init+0x1c4/0x240 [rvu_nicpf]
[   19.901498]  otx2_open+0x228/0xa70 [rvu_nicpf]
[   19.901501]  otx2vf_open+0x20/0xd0 [rvu_nicvf]
[   19.901504]  __dev_open+0x114/0x1d0
[   19.901507]  __dev_change_flags+0x194/0x210
[   19.901510]  dev_change_flags+0x2c/0x70
[   19.901512]  devinet_ioctl+0x3a4/0x6c4
[   19.901515]  inet_ioctl+0x228/0x240
[   19.901518]  sock_ioctl+0x2ac/0x480
[   19.901522]  __arm64_sys_ioctl+0x564/0xe50
[   19.901525]  invoke_syscall.constprop.0+0x58/0xf0
[   19.901529]  do_el0_svc+0x58/0x150
[   19.901531]  el0_svc+0x30/0x140
[   19.901533]  el0t_64_sync_handler+0xe8/0x114
[   19.901535]  el0t_64_sync+0x1a0/0x1a4
[   19.901537] ---[ end trace 678c0bf660ad8116 ]---

Fixes: b2e3406a38f0 ("octeontx2-pf: Add support for page pool")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/20231010034842.3807816-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

nfc: nci: assert requested protocol is valid

The protocol is used in a bit mask to determine if the protocol is
supported. Assert the provided protocol is less than the maximum
defined so it doesn't potentially perform a shift-out-of-bounds and
provide a clearer error for undefined protocols vs unsupported ones.

Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Reported-and-tested-by: syzbot+0839b78e119aae1fec78@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0839b78e119aae1fec78
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231009200054.82557-1-jeremy@jcline.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

af_packet: Fix fortified memcpy() without flex array.

Sergei Trofimovich reported a regression [0] caused by commit a0ade8404c3b
("af_packet: Fix warning of fortified memcpy() in packet_getname().").

It introduced a flex array sll_addr_flex in struct sockaddr_ll as a
union-ed member with sll_addr to work around the fortified memcpy() check.

However, a userspace program uses a struct that has struct sockaddr_ll in
the middle, where a flex array is illegal to exist.

  include/linux/if_packet.h:24:17: error: flexible array member 'sockaddr_ll::<unnamed union>::<unnamed struct>::sll_addr_flex' not at end of 'struct packet_info_t'
     24 |                 __DECLARE_FLEX_ARRAY(unsigned char, sll_addr_flex);
        |                 ^~~~~~~~~~~~~~~~~~~~

To fix the regression, let's go back to the first attempt [1] telling
memcpy() the actual size of the array.

Reported-by: Sergei Trofimovich <slyich@gmail.com>
Closes: https://github.com/NixOS/nixpkgs/pull/252587#issuecomment-1741733002 [0]
Link: https://lore.kernel.org/netdev/20230720004410.87588-3-kuniyu@amazon.com/
Fixes: a0ade8404c3b ("af_packet: Fix warning of fortified memcpy() in packet_getname().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20231009153151.75688-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

pinctrl: renesas: rzn1: Enable missing PINMUX

Enable pin muxing (eg. programmable function), so that the RZ/N1 GPIO
pins will be configured as specified by the pinmux in the DTS.

This used to be enabled implicitly via CONFIG_GENERIC_PINMUX_FUNCTIONS,
however that was removed, since the RZ/N1 driver does not call any of
the generic pinmux functions.

Fixes: 1308fb4e4eae14e6 ("pinctrl: rzn1: Do not select GENERIC_PIN{CTRL_GROUPS,MUX_FUNCTIONS}")
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231004200008.1306798-1-ralph.siemsen@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

net: tcp: fix crashes trying to free half-baked MTU probes

tcp_stream_alloc_skb() initializes the skb to use tcp_tsorted_anchor
which is a union with the destructor. We need to clean that
TCP-iness up before freeing.

Fixes: 736013292e3c ("tcp: let tcp_mtu_probe() build headless packets")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231010173651.3990234-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'ieee802154-for-net-2023-10-10' of git://git./linux/kernel/git/wpan/wpan

Stefan Schmidt says:

====================
pull-request: ieee802154 for net 2023-10-10

Just one small fix this time around.

Dinghao Liu fixed a potential use-after-free in the ca8210 driver probe
function.

* tag 'ieee802154-for-net-2023-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
ieee802154: ca8210: Fix a potential UAF in ca8210_probe
====================

Link: https://lore.kernel.org/r/20231010200943.82225-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'fs_for_v6.6-rc6' of git://git./linux/kernel/git/jack/linux-fs

Pull quota regression fix from Jan Kara.

* tag 'fs_for_v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Fix slow quotaoff

Merge tag 'for-6.6-rc5-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"A revert of recent mount option parsing fix, this breaks mounts with
  security options.

  The second patch is a flexible array annotation"

* tag 'for-6.6-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: add __counted_by for struct btrfs_delayed_item and use struct_size()
  Revert "btrfs: reject unknown mount options early"

Merge tag 'ata-6.6-rc6' of git://git./linux/kernel/git/dlemoal/libata

Pull ata fixes from Damien Le Moal:

- Three fixes for the pata_parport driver to address a typo in the
   code, a missing operation implementation and port reset handling in
   the presence of slave devices (Ondrej)

- Fix handling of ATAPI devices reset with the fit3 protocol driver of
   the pata_parport driver (Ondrej)

- A follow up fix for the recent suspend/resume corrections to avoid
   attempting rescanning on resume the scsi device associated with an
   ata disk when the request queue of the scsi device is still suspended
   (in addition to not doing the rescan if the scsi device itself is
   still suspended) (me)

* tag 'ata-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  scsi: Do not rescan devices with a suspended queue
  ata: pata_parport: fit3: implement IDE command set registers
  ata: pata_parport: add custom version of wait_after_reset
  ata: pata_parport: implement set_devctl
  ata: pata_parport: fix pata_parport_devchk

Merge tag 'for-linus-2023101101' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Benjamin Tissoires:

- regression fix for i2c-hid when used on DT platforms (Johan Hovold)

- kernel crash fix on removal of the Logitech USB receiver (Hans de
   Goede)

* tag 'for-linus-2023101101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-hidpp: Fix kernel crash on receiver USB disconnect
  HID: i2c-hid: fix handling of unpopulated devices

Merge tag 'printk-for-6.6-rc6' of git://git./linux/kernel/git/printk/linux

Pull printk regression fix from Petr Mladek:

- Avoid unnecessary wait and try to flush messages before checking
pending ones

* tag 'printk-for-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: flush consoles before checking progress

Bluetooth: Fix a refcnt underflow problem for hci_conn

Syzbot reports a warning as follows:

WARNING: CPU: 1 PID: 26946 at net/bluetooth/hci_conn.c:619
hci_conn_timeout+0x122/0x210 net/bluetooth/hci_conn.c:619
...
Call Trace:
<TASK>
process_one_work+0x884/0x15c0 kernel/workqueue.c:2630
process_scheduled_works kernel/workqueue.c:2703 [inline]
worker_thread+0x8b9/0x1290 kernel/workqueue.c:2784
kthread+0x33c/0x440 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
</TASK>

It is because the HCI_EV_SIMPLE_PAIR_COMPLETE event handler drops
hci_conn directly without check Simple Pairing whether be enabled. But
the Simple Pairing process can only be used if both sides have the
support enabled in the host stack.

Add hci_conn_ssp_enabled() for hci_conn in HCI_EV_IO_CAPA_REQUEST and
HCI_EV_SIMPLE_PAIR_COMPLETE event handlers to fix the problem.

Fixes: 0493684ed239 ("[Bluetooth] Disable disconnect timer during Simple Pairing")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_sync: always check if connection is alive before deleting

In hci_abort_conn_sync it is possible that conn is deleted concurrently
by something else, also e.g. when waiting for hdev->lock. This causes
double deletion of the conn, so UAF or conn_hash.list corruption.

Fix by having all code paths check that the connection is still in
conn_hash before deleting it, while holding hdev->lock which prevents
any races.

Log (when powering off while BAP streaming, occurs rarely):
=======================================================================
kernel BUG at lib/list_debug.c:56!
...
? __list_del_entry_valid (lib/list_debug.c:56)
hci_conn_del (net/bluetooth/hci_conn.c:154) bluetooth
hci_abort_conn_sync (net/bluetooth/hci_sync.c:5415) bluetooth
? __pfx_hci_abort_conn_sync+0x10/0x10 [bluetooth]
? lock_release+0x1d5/0x3c0
? hci_disconnect_all_sync.constprop.0+0xb2/0x230 [bluetooth]
? __pfx_lock_release+0x10/0x10
? __kmem_cache_free+0x14d/0x2e0
hci_disconnect_all_sync.constprop.0+0xda/0x230 [bluetooth]
? __pfx_hci_disconnect_all_sync.constprop.0+0x10/0x10 [bluetooth]
? hci_clear_adv_sync+0x14f/0x170 [bluetooth]
? __pfx_set_powered_sync+0x10/0x10 [bluetooth]
hci_set_powered_sync+0x293/0x450 [bluetooth]
=======================================================================

Fixes: 94d9ba9f9888 ("Bluetooth: hci_sync: Fix UAF in hci_disconnect_all_sync")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: Reject connection with the device which has same BD_ADDR

This change is used to relieve CVE-2020-26555. The description of
the CVE:

Bluetooth legacy BR/EDR PIN code pairing in Bluetooth Core Specification
1.0B through 5.2 may permit an unauthenticated nearby device to spoof
the BD_ADDR of the peer device to complete pairing without knowledge
of the PIN. [1]

The detail of this attack is in IEEE paper:
BlueMirror: Reflections on Bluetooth Pairing and Provisioning Protocols
[2]

It's a reflection attack. The paper mentioned that attacker can induce
the attacked target to generate null link key (zero key) without PIN
code. In BR/EDR, the key generation is actually handled in the controller
which is below HCI.

A condition of this attack is that attacker should change the
BR_ADDR of his hacking device (Host B) to equal to the BR_ADDR with
the target device being attacked (Host A).

Thus, we reject the connection with device which has same BD_ADDR
both on HCI_Create_Connection and HCI_Connection_Request to prevent
the attack. A similar implementation also shows in btstack project.
[3][4]

Cc: stable@vger.kernel.org
Link: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-26555
Link: https://ieeexplore.ieee.org/abstract/document/9474325/authors#authors
Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L3523
Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L7297
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_event: Ignore NULL link key

This change is used to relieve CVE-2020-26555. The description of the
CVE:

Bluetooth legacy BR/EDR PIN code pairing in Bluetooth Core Specification
1.0B through 5.2 may permit an unauthenticated nearby device to spoof
the BD_ADDR of the peer device to complete pairing without knowledge
of the PIN. [1]

The detail of this attack is in IEEE paper:
BlueMirror: Reflections on Bluetooth Pairing and Provisioning Protocols
[2]

It's a reflection attack. The paper mentioned that attacker can induce
the attacked target to generate null link key (zero key) without PIN
code. In BR/EDR, the key generation is actually handled in the controller
which is below HCI.

Thus, we can ignore null link key in the handler of "Link Key Notification
event" to relieve the attack. A similar implementation also shows in
btstack project. [3]

v3: Drop the connection when null link key be detected.

v2:
- Used Link: tag instead of Closes:
- Used bt_dev_dbg instead of BT_DBG
- Added Fixes: tag

Cc: stable@vger.kernel.org
Fixes: 55ed8ca10f35 ("Bluetooth: Implement link key handling for the management interface")
Link: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-26555
Link: https://ieeexplore.ieee.org/abstract/document/9474325/authors#authors
Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L3722
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: ISO: Fix invalid context error

This moves the hci_le_terminate_big_sync call from rx_work
to cmd_sync_work, to avoid calling sleeping function from
an invalid context.

Reported-by: syzbot+c715e1bd8dfbcb1ab176@syzkaller.appspotmail.com
Fixes: a0bfde167b50 ("Bluetooth: ISO: Add support for connecting multiple BISes")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: vhci: Fix race when opening vhci device

When the vhci device is opened in the two-step way, i.e.: open device
then write a vendor packet with requested controller type, the device
shall respond with a vendor packet which includes HCI index of created
interface.

When the virtual HCI is created, the host sends a reset request to the
controller. This request is processed by the vhci_send_frame() function.
However, this request is send by a different thread, so it might happen
that this HCI request will be received before the vendor response is
queued in the read queue. This results in the HCI vendor response and
HCI reset request inversion in the read queue which leads to improper
behavior of btvirt:

> dmesg
[1754256.640122] Bluetooth: MGMT ver 1.22
[1754263.023806] Bluetooth: MGMT ver 1.22
[1754265.043775] Bluetooth: hci1: Opcode 0x c03 failed: -110

In order to synchronize vhci two-step open/setup process with virtual
HCI initialization, this patch adds internal lock when queuing data in
the vhci_send_frame() function.

Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Merge branch 'rework/misc-cleanups' into for-linus

btrfs: add __counted_by for struct btrfs_delayed_item and use struct_size()

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

While there, use struct_size() helper, instead of the open-coded
version, to calculate the size for the allocation of the whole
flexible structure, including of course, the flexible-array member.

This code was found with the help of Coccinelle, and audited and
fixed manually.

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

net/smc: Fix pos miscalculation in statistics

SMC_STAT_PAYLOAD_SUB(_smc_stats, _tech, key, _len, _rc) will calculate
wrong bucket positions for payloads of exactly 4096 bytes and
(1 << (m + 12)) bytes, with m == SMC_BUF_MAX - 1.

Intended bucket distribution:
Assume l == size of payload, m == SMC_BUF_MAX - 1.

Bucket 0 : 0 < l <= 2^13
Bucket n, 1 <= n <= m-1 : 2^(n+12) < l <= 2^(n+13)
Bucket m : l > 2^(m+12)

Current solution:
_pos = fls64((l) >> 13)
[...]
_pos = (_pos < m) ? ((l == 1 << (_pos + 12)) ? _pos - 1 : _pos) : m

For l == 4096, _pos == -1, but should be _pos == 0.
For l == (1 << (m + 12)), _pos == m, but should be _pos == m - 1.

In order to avoid special treatment of these corner cases, the
calculation is adjusted. The new solution first subtracts the length by
one, and then calculates the correct bucket by shifting accordingly,
i.e. _pos = fls64((l - 1) >> 13), l > 0.
This not only fixes the issues named above, but also makes the whole
bucket assignment easier to follow.

Same is done for SMC_STAT_RMB_SIZE_SUB(_smc_stats, _tech, k, _len),
where the calculation of the bucket position is similar to the one
named above.

Fixes: e0e4b8fa5338 ("net/smc: Add SMC statistics support")
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Nils Hoppmann <niho@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: flower: avoid rmmod nfp crash issues

When there are CT table entries, and you rmmod nfp, the following
events can happen:

task1：
    nfp_net_pci_remove
          ↓
    nfp_flower_stop->(asynchronous)tcf_ct_flow_table_cleanup_work(3)
          ↓
    nfp_zone_table_entry_destroy(1)

task2：
    nfp_fl_ct_handle_nft_flow(2)

When the execution order is (1)->(2)->(3), it will crash. Therefore, in
the function nfp_fl_ct_del_flow, nf_flow_table_offload_del_cb needs to
be executed synchronously.

At the same time, in order to solve the deadlock problem and the problem
of rtnl_lock sometimes failing, replace rtnl_lock with the private
nfp_fl_lock.

Fixes: 7cc93d888df7 ("nfp: flower-ct: remove callback delete deadlock")
Cc: stable@vger.kernel.org
Signed-off-by: Yanguo Li <yanguo.li@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read

syzbot has found an uninit-value bug triggered by the dm9601 driver [1].

This error happens because the variable res is not updated if the call
to dm_read_shared_word returns an error. In this particular case -EPROTO
was returned and res stayed uninitialized.

This can be avoided by checking the return value of dm_read_shared_word
and propagating the error if the read operation failed.

[1] https://syzkaller.appspot.com/bug?extid=1f53a30781af65d2c955

Cc: stable@vger.kernel.org
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reported-and-tested-by: syzbot+1f53a30781af65d2c955@syzkaller.appspotmail.com
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Fixes: d0374f4f9c35cdfbee0 ("USB: Davicom DM9601 usbnet driver")
Link: https://lore.kernel.org/r/20231009-topic-dm9601_uninit_mdio_read-v2-1-f2fe39739b6c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2023-10-11

We've added 14 non-merge commits during the last 5 day(s) which contain
a total of 12 files changed, 398 insertions(+), 104 deletions(-).

The main changes are:

1) Fix s390 JIT backchain issues in the trampoline code generation which
   previously clobbered the caller's backchain, from Ilya Leoshkevich.

2) Fix zero-size allocation warning in xsk sockets when the configured
   ring size was close to SIZE_MAX, from Andrew Kanner.

3) Fixes for bpf_mprog API that were found when implementing support
   in the ebpf-go library along with selftests, from Daniel Borkmann
   and Lorenz Bauer.

4) Fix riscv JIT to properly sign-extend the return register in programs.
   This fixes various test_progs selftests on riscv, from Björn Töpel.

5) Fix verifier log for async callback return values where the allowed
   range was displayed incorrectly, from David Vernet.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  s390/bpf: Fix unwinding past the trampoline
  s390/bpf: Fix clobbering the caller's backchain in the trampoline
  selftests/bpf: Add testcase for async callback return value failure
  bpf: Fix verifier log for async callback return values
  xdp: Fix zero-size allocation warning in xskq_create()
  riscv, bpf: Track both a0 (RISC-V ABI) and a5 (BPF) return values
  riscv, bpf: Sign-extend return values
  selftests/bpf: Make seen_tc* variable tests more robust
  selftests/bpf: Test query on empty mprog and pass revision into attach
  selftests/bpf: Adapt assert_mprog_count to always expect 0 count
  selftests/bpf: Test bpf_mprog query API via libbpf and raw syscall
  bpf: Refuse unused attributes in bpf_prog_{attach,detach}
  bpf: Handle bpf_mprog_query with NULL entry
  bpf: Fix BPF_PROG_QUERY last field check
====================

Link: https://lore.kernel.org/r/20231010223610.3984-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ethtool: Fix mod state of verbose no_mask bitset

A bitset without mask in a _SET request means we want exactly the bits in
the bitset to be set. This works correctly for compact format but when
verbose format is parsed, ethnl_update_bitset32_verbose() only sets the
bits present in the request bitset but does not clear the rest. The commit
6699170376ab fixes this issue by clearing the whole target bitmap before we
start iterating. The solution proposed brought an issue with the behavior
of the mod variable. As the bitset is always cleared the old val will
always differ to the new val.

Fix it by adding a new temporary variable which save the state of the old
bitmap.

Fixes: 6699170376ab ("ethtool: fix application of verbose no_mask bitset")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231009133645.44503-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-fixes-for-6.6-20231009' of git://git./linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2023-10-09

Lukas Magel's patch for the CAN ISO-TP protocol fixes the TX state
detection and wait behavior.

John Watts contributes a patch to only show the sun4i_can Kconfig
option on ARCH_SUNXI.

A patch by Miquel Raynal fixes the soft-reset workaround for Renesas
SoCs in the sja1000 driver.

Markus Schneider-Pargmann's patch for the tcan4x5x m_can glue driver
fixes the id2 register for the tcan4553.

2 patches by Haibo Chen fix the flexcan stop mode for the imx93 SoC.

* tag 'linux-can-fixes-for-6.6-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: tcan4x5x: Fix id2_register for tcan4553
  can: flexcan: remove the auto stop mode for IMX93
  can: sja1000: Always restart the Tx queue after an overrun
  arm64: dts: imx93: add the Flex-CAN stop mode by GPR
  can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set
  can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
====================

Link: https://lore.kernel.org/r/20231009085256.693378-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()

Sili Luo reported a race in nfc_llcp_sock_get(), leading to UAF.

Getting a reference on the socket found in a lookup while
holding a lock should happen before releasing the lock.

nfc_llcp_sock_get_sn() has a similar problem.

Finally nfc_llcp_recv_snl() needs to make sure the socket
found by nfc_llcp_sock_from_sn() does not disappear.

Fixes: 8f50020ed9b8 ("NFC: LLCP late binding")
Reported-by: Sili Luo <rootlab@huawei.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231009123110.3735515-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mctp: perform route lookups under a RCU read-side lock

Our current route lookups (mctp_route_lookup and mctp_route_lookup_null)
traverse the net's route list without the RCU read lock held. This means
the route lookup is subject to preemption, resulting in an potential
grace period expiry, and so an eventual kfree() while we still have the
route pointer.

Add the proper read-side critical section locks around the route
lookups, preventing premption and a possible parallel kfree.

The remaining net->mctp.routes accesses are already under a
rcu_read_lock, or protected by the RTNL for updates.

Based on an analysis from Sili Luo <rootlab@huawei.com>, where
introducing a delay in the route lookup could cause a UAF on
simultaneous sendmsg() and route deletion.

Reported-by: Sili Luo <rootlab@huawei.com>
Fixes: 889b7da23abf ("mctp: Add initial routing framework")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/29c4b0e67dc1bf3571df3982de87df90cae9b631.1696837310.git.jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: skbuff: fix kernel-doc typos

Correct punctuation and drop an extraneous word.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231008214121.25940-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/bpf: Fix unwinding past the trampoline

When functions called by the trampoline panic, the backtrace that is
printed stops at the trampoline, because the trampoline does not store
its caller's frame address (backchain) on stack; it also stores the
return address at a wrong location.

Store both the same way as is already done for the regular eBPF programs.

Fixes: 528eb2cb87bc ("s390/bpf: Implement arch_prepare_bpf_trampoline()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231010203512.385819-3-iii@linux.ibm.com