Carlos O'Donell [Wed, 5 Mar 2014 05:11:01 +0000 (00:11 -0500)]
hppa: Add _STACK_GROWS_* cases to pthread_attr_[sg]etstack.
This is one of a several NPTL patches to build glibc on hppa.
The pthread_attr_[sg]etstack functions are defined by POSIX as
taking a stackaddr that is the lowest addressable byte of the
storage used for the stack. However, the internal iattr variable
of the same name in NPTL is actually the final stack address
as usable in the stack pointer for the machine. Therefore the
NPTL implementation must add and subtract stacksize for
_STACK_GROWS_DOWN architectures. HPPA is a _STACK_GROWS_UP
architecture and doesn't need to add or subtract anything,
the stack address *is* the lowest addressable byte of the
storage.
Tested on hppa-linux-gnu, with no regressions.
Can't impact any other targets because of the conditionals.
If nobody objects I'll check this in at the end of the week.
I can't see there being any objections to this patch except
that it introduces more code to maintain for an old architecture
(perhaps we'll get another _S_G_U target in the future?).
Mike Frysinger [Sat, 25 Jan 2014 05:44:37 +0000 (00:44 -0500)]
stop supporting bash-1.x
We've stopped supporting toolchain packages older than 2009, so punting
bash-1.x is reasonable when bash-2 was released almost 20 years ago.
Mike Frysinger [Sat, 25 Jan 2014 05:39:31 +0000 (00:39 -0500)]
delete ksh checks
Nothing in the tree uses ksh anymore, so punt these checks.
Mike Frysinger [Sat, 25 Jan 2014 05:33:48 +0000 (00:33 -0500)]
sotruss: drop ksh support and add basic POSIX shell support
This script works fine under bash as-is, so we don't need ksh anymore.
Once we tweak the function style, the code even works (for the most part)
under a POSIX shell. The localized strings will be prepended with a $,
but it is otherwise functional.
Mike Frysinger [Thu, 13 Mar 2014 21:48:14 +0000 (17:48 -0400)]
manual: time: fix typo in IST example
The current description says Tuesday when it meant to say Thursday
(since that comes before Friday).
Mike Frysinger [Sun, 29 Dec 2013 21:30:35 +0000 (16:30 -0500)]
tst-longjmp_chk2: add comments/sanity check
If the longjmp checking code is slightly broken, this code can loop
forever which isn't too helpful. Add a sanity check to keep that
from happening.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Igor Zamyatin [Thu, 13 Mar 2014 18:10:22 +0000 (11:10 -0700)]
Save and restore AVX-512 zmm registers to x86-64 ld.so
AVX-512 ISA adds 512-bit zmm registers. This patch updates
_dl_runtime_profile to pass zmm registers to run-time audit. It also
changes _dl_x86_64_save_sse and _dl_x86_64_restore_sse to upport zmm
registers, which are called when only when RTLD_PREPARE_FOREIGN_CALL
is used. Its performance impact is minimum.
* config.h.in (HAVE_AVX512_SUPPORT): New #undef.
(HAVE_AVX512_ASM_SUPPORT): Likewise.
* sysdeps/x86_64/bits/link.h (La_x86_64_zmm): New.
(La_x86_64_vector): Add zmm.
* sysdeps/x86_64/Makefile (tests): Add tst-audit10.
(modules-names): Add tst-auditmod10a and tst-auditmod10b.
($(objpfx)tst-audit10): New target.
($(objpfx)tst-audit10.out): Likewise.
(tst-audit10-ENV): New.
(AVX512-CFLAGS): Likewise.
(CFLAGS-tst-audit10.c): Likewise.
(CFLAGS-tst-auditmod10a.c): Likewise.
(CFLAGS-tst-auditmod10b.c): Likewise.
* sysdeps/x86_64/configure.ac: Set config-cflags-avx512,
HAVE_AVX512_SUPPORT and HAVE_AVX512_ASM_SUPPORT.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/dl-trampoline.S (_dl_runtime_profile): Add
AVX-512 zmm register support.
(_dl_x86_64_save_sse): Likewise.
(_dl_x86_64_restore_sse): Likewise.
* sysdeps/x86_64/dl-trampoline.h: Updated to support different
size vector registers.
* sysdeps/x86_64/link-defines.sym (YMM_SIZE): New.
(ZMM_SIZE): Likewise.
* sysdeps/x86_64/tst-audit10.c: New file.
* sysdeps/x86_64/tst-auditmod10a.c: Likewise.
* sysdeps/x86_64/tst-auditmod10b.c: Likewise.
Roland McGrath [Thu, 13 Mar 2014 17:38:27 +0000 (10:38 -0700)]
Use __ehdr_start, when available, for rtld to get its own headers.
Roland McGrath [Thu, 13 Mar 2014 17:36:14 +0000 (10:36 -0700)]
ChangeLog format fix.
Paul Pluzhnikov [Thu, 13 Mar 2014 15:19:18 +0000 (08:19 -0700)]
Add missing elf/tst-pie2.c -- should have been in
commit
798212a01311491d5e14fcda687460b75f8ca286
Joseph Myers [Thu, 13 Mar 2014 15:01:15 +0000 (15:01 +0000)]
Regenerate INSTALL.
Will Newton [Mon, 3 Mar 2014 06:28:33 +0000 (06:28 +0000)]
manual/setjmp.texi: Improve clarity of Sys V context doc
ChangeLog:
2014-03-13 Will Newton <will.newton@linaro.org>
* manual/setjmp.texi (System V contexts): Improve
clarity and grammar of documentation.
Paul Pluzhnikov [Wed, 12 Mar 2014 22:58:39 +0000 (15:58 -0700)]
2014-03-12 Paul Pluzhnikov <ppluzhnikov@google.com>
[BZ #16381]
* elf/Makefile (tests): Add tst-pie2.
(tests-pie): Add tst-pie2.
* elf/tst-pie2.c: New file.
* elf/dl-load.c (_dl_map_object_from_fd): Assert correct l_type
for ET_EXEC.
* elf/rtld.c (map_doit): Load executable as lt_executable.
(dl_main): Likewise.
Joseph Myers [Wed, 12 Mar 2014 17:29:24 +0000 (17:29 +0000)]
Fix __ASSUME_PSELECT for MicroBlaze (bug 16642).
Reviewing (for all architectures, with a baseline kernel version of
2.6.32) the kernel support for features for which __ASSUME_* macros
would be affected by a move to 2.6.32 as minimum kernel version showed
up that __ASSUME_PSELECT was wrongly defined for MicroBlaze, despite
the corresponding syscall table entry not being wired up in the
MicroBlaze kernel.
This patch makes the MicroBlaze kernel-features.h undefine
__ASSUME_PSELECT. I'd also encourage wiring it up in the kernel (so
you can then make this #undef conditional, and eventually obsolete
once a recent-enough kernel is required). I suspect it wasn't wired
up because of the mistaken comment in asm/unistd.h "obsolete ->
sys_pselect7" (there is no such syscall as pselect7).
[BZ #16642]
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_PSELECT): Undefine.
Adhemerval Zanella [Wed, 12 Mar 2014 13:55:50 +0000 (08:55 -0500)]
PowerPC: Fix bzero definition for static libc for PPC32
This patch fixes an issue for powerpc32-fpu static build which fails
with an 'bzero' undefined reference. This patch adds bzero ifunc selector
for static builds and fixes the '__bzero_ppc' reference to default
memset symbol (since static memset build does not provide ifunc
selector).
Fixes BZ#16689.
Siddhesh Poyarekar [Wed, 12 Mar 2014 11:57:22 +0000 (17:27 +0530)]
Provide correct buffer length to netgroup queries in nscd (BZ #16695)
The buffer to query netgroup entries is allocated sufficient space for
the netgroup entries and the key to be appended at the end, but it
sends in an incorrect available length to the NSS netgroup query
functions, resulting in overflow of the buffer in some special cases.
The fix here is to factor in the key length when sending the available
buffer and buffer length to the query functions.
Adhemerval Zanella [Tue, 11 Mar 2014 21:17:50 +0000 (16:17 -0500)]
PowerPC: Fix strspn for static build
This patch makes the strspn ifunc selector build for static builds.
Joseph Myers [Tue, 11 Mar 2014 22:30:40 +0000 (22:30 +0000)]
Fix MIPS libc_feresetround*_ctx to preserve exceptions.
Testing on mips64 showed missing underflow exceptions (from exp, for
example) in non-default rounding modes, caused by
libc_feresetround*_ctx wrongly restoring a saved environment without
preserving exceptions, when that's only valid for the _noex variants.
(I don't know why Steve didn't see this in his testing.) This patch
fixes this by using libc_feupdateenv_mips_ctx for the relevant macros
and removing the problem definitions.
The problem definitions aren't suitable for the _noex macros either
because they only discard exceptions in non-default rounding modes,
and while for some uses of *_noex/*_NOEX it doesn't matter whether
exceptions are discarded, dbl-64/e_remainder.c requires
SET_RESTORE_ROUND_NOEX to cause exceptions to be discarded. I think
the accumulated set of macros / functions for optimized exception /
rounding mode handling could do with a careful review by now, and
possible refactoring, and at least one new feature (extracting the
saved rounding mode from an environment / context variable - see
dbl-64/e_sqrt.c for a case where this could be used).
Tested mips64.
* sysdeps/mips/math_private.h [__mips_hard_float]
(libc_feresetround_ctx): Define to libc_feupdateenv_mips_ctx not
libc_feresetround_mips_ctx.
[__mips_hard_float] (libc_feresetroundf_ctx): Likewise.
[__mips_hard_float] (libc_feresetroundl_ctx): Likewise.
[__mips_hard_float] (libc_feresetround_mips_ctx): Remove.
Joseph Myers [Tue, 11 Mar 2014 22:24:00 +0000 (22:24 +0000)]
Fix nextafter overflow in non-default rounding modes (bug 16677).
ISO C requires the result of nextafter to be independent of the
rounding mode, even when underflow or overflow occurs. This patch
fixes the bug in various nextafter implementations that, having done
an overflowing computation to force an overflow exception (correct),
they then return the result of that computation rather than an
infinity computed some other way (incorrect, when the overflowing
result of arithmetic with that sign and rounding mode is finite but
the correct result is infinite) - generally by falling through to
existing code to return a value that in fact is correct for this case
(but was computed by an integer increment and so without generating
the exceptions required). Having fixed the bug, the previously
deferred conversion of nextafter testing in libm-test.inc to
ALL_RM_TEST is also included.
Tested x86_64 and x86; also spot-checked results of nextafter tests
for powerpc32 and mips64 to test the ldbl-128ibm and ldbl-128
changes. (The m68k change is untested.)
[BZ #16677]
* math/s_nextafter.c (__nextafter): Do not return value from
overflowing computation.
* sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Likewise.
* sysdeps/ieee754/flt-32/s_nextafterf.c (__nextafterf): Likewise.
* sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c (__nextafterl):
Likewise.
* sysdeps/m68k/m680x0/fpu/s_nextafterl.c (__nextafterl): Likewise.
* math/libm-test.inc (nextafter_test): Use ALL_RM_TEST.
Roland McGrath [Tue, 11 Mar 2014 17:59:01 +0000 (10:59 -0700)]
ARM: Fix up setjmp/longjmp changes sfi_* macro use.
Adhemerval Zanella [Mon, 10 Mar 2014 20:26:20 +0000 (15:26 -0500)]
PowerPC: Fix bzero definition for static libc for PPC64
This patch fixes an issue for powerpc64[le] static build where __bzero
is definied in multiple places (memset-ppc64.o and bzero.o). It is now
defined only in bzero.o and memset-ppc64.o only defined __bzero_ppc for
both dynamic and static library.
Fixes BZ#16683.
Vidya Ranganathan [Mon, 10 Mar 2014 16:20:36 +0000 (12:20 -0400)]
PowerPC: strspn optimization for PPC64/POWER7
The optimization is achieved by following techniques:
> hashing of needle.
> hashing avoids scanning of duplicate entries in needle across the string.
> initializing the hash table with Vector instructions (VSX) by quadword access.
> unrolling when scanning for character in string across hash table.
Adhemerval Zanella [Fri, 7 Mar 2014 12:09:47 +0000 (06:09 -0600)]
PowerPC: strncat optimization for PPC64
The optimization is achieved by following techniques:
1. Doubleword aligned memory access and compares using
cmpb instruction.
2. Loop unrolling for byte load/store.
3. CPU pre-fetch to avoid cache miss.
Siddhesh Poyarekar [Mon, 10 Mar 2014 07:47:54 +0000 (13:17 +0530)]
Mark nscd service as forking in systemd service file (BZ #16639)
Currently the nscd service is installed in systemd as a simple
service, which means that it is able to handle its own errors and does
not quit. Since nscd does not fit that description, i.e. it can exit
on errors like, say, failing to parse nscd.conf, it should be declared
as forking instead.
Adhemerval Zanella [Sat, 8 Mar 2014 17:24:32 +0000 (11:24 -0600)]
PowerPC: Fix modf/modff optimization return sign
This patch fix the optimized powerpc-fpu modf/modff implementation
when using in non-default rounding mode where the zero sign is not
as expected. It fixes the libm testsuite tests
modf_downward (0) == 0.
00000000000000000000e+00
modf_downward (20) == 0.
00000000000000000000e+00
modf_downward (21) == 0.
00000000000000000000e+00
Where the sign returned was negative.
Joseph Myers [Sat, 8 Mar 2014 14:08:38 +0000 (14:08 +0000)]
Add libm-test.inc macro for all-rounding-modes testing.
This patch adds support in libm-test.inc for automatically running
tests of a function in all rounding modes, in the form of a macro
ALL_RM_TEST to loop over all rounding modes when running tests of a
function, and uses it for functions whose results should always be
independent of the rounding mode.
Conversion of tests of nextafter to ALL_RM_TEST was deferred because
trying that conversion showed up bug 16677. (Finding such a bug of
course illustrates the point of testing more systematically in all
rounding modes rather than only reactively when bugs get reported in a
particular function in a non-default mode.) Conversion of tests where
results can depend on the rounding mode will follow once I add
gen-libm-test.pl support for using different initializers for the
expected results for different rounding modes (again, some conversions
may need deferring until bugs are fixed, depending on how
straightforward they are to XFAIL in a particular context).
Some existing tests get run five times rather than four, with
round-to-nearest tests both run in that as default rounding mode and
also with it explicitly set with fesetround (FE_TONEAREST). This
duplication doesn't seem particularly useful, so ALL_RM_TEST only runs
tests four times.
Tested x86_64 and x86.
* math/libm-test.inc (ALL_RM_TEST): New macro.
(ceil_test): Use ALL_RM_TEST.
(cimag_test): Likewise.
(conj_test): Likewise.
(copysign_test): Likewise.
(cproj_test): Likewise.
(creal_test): Likewise.
(fabs_test): Likewise.
(floor_test): Likewise.
(fmax_test): Likewise.
(fmin_test): Likewise.
(fmod_test): Likewise.
(fpclassify_test): Likewise.
(frexp_test): Likewise.
(ilogb_test): Likewise.
(isfinite_test): Likewise.
(finite_test): Likewise.
(isgreater_test): Likewise.
(isgreaterequal_test): Likewise.
(isinf_test): Likewise.
(isless_test): Likewise.
(islessequal_test): Likewise.
(islessgreater_test): Likewise.
(isnan_test): Likewise.
(isnormal_test): Likewise.
(issignaling_test): Likewise.
(isunordered_test): Likewise.
(logb_test): Likewise.
(logb_downward_test_data): Remove.
(logb_test_downward): Likewise.
(lround_test): Use ALL_RM_TEST.
(llround_test): Likewise.
(modf_test): Likewise.
(nexttoward_test): Likewise.
(remainder_test): Likewise.
(drem_test): Likewise.
(remainder_tonearest_test_data): Likewise.
(remainder_test_tonearest): Likewise.
(drem_test_tonearest): Likewise.
(remainder_towardzero_test_data): Likewise.
(remainder_test_towardzero): Likewise.
(drem_test_towardzero): Likewise.
(remainder_downward_test_data): Likewise.
(remainder_test_downward): Likewise.
(drem_test_downward): Likewise.
(remainder_upward_test_data): Likewise.
(remainder_test_upward): Likewise.
(drem_test_upward): Likewise.
(remquo_test): Use ALL_RM_TEST. Remove comment about x.
(round_test): Use ALL_RM_TEST.
(signbit_test): Likewise.
(trunc_test): Likewise.
(significand_test): Likewise.
(main): Don't call removed functions.
Joseph Myers [Fri, 7 Mar 2014 23:57:56 +0000 (23:57 +0000)]
Fix POSIX namespace for <bits/siginfo.h> (bug 16674).
<bits/siginfo.h> causes symbols ILL_*, FPE_*, SEGV_* BUS_*, CLD_*,
POLL_* and TRAP_* to be exposed in <signal.h> (and <sys/wait.h>), even
though those symbols are not in non-XSI POSIX before POSIX.1-2008 and
even in POSIX.1-2008 the TRAP_* symbols are XSI-only. This patch
conditions the symbols appropriately in the various <bits/siginfo.h>
implementations (various <signal.h> and <sys/wait.h> conformtest
issues remain for standards other than POSIX (1995/6)). Tested
x86_64.
[BZ #16674]
* bits/siginfo.h (ILL_ILLOPC): Condition on [__USE_XOPEN_EXTENDED
|| __USE_XOPEN2K8].
(ILL_ILLOPN): Likewise.
(ILL_ILLADR): Likewise.
(ILL_ILLTRP): Likewise.
(ILL_PRVOPC): Likewise.
(ILL_PRVREG): Likewise.
(ILL_COPROC): Likewise.
(ILL_BADSTK): Likewise.
(FPE_INTDIV): Likewise.
(FPE_INTOVF): Likewise.
(FPE_FLTDIV): Likewise.
(FPE_FLTOVF): Likewise.
(FPE_FLTUND): Likewise.
(FPE_FLTRES): Likewise.
(FPE_FLTINV): Likewise.
(FPE_FLTSUB): Likewise.
(SEGV_MAPERR): Likewise.
(SEGV_ACCERR): Likewise.
(BUS_ADRALN): Likewise.
(BUS_ADRERR): Likewise.
(BUS_OBJERR): Likewise.
(TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED].
(TRAP_TRACE): Likewise.
(CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED ||
__USE_XOPEN2K8].
(CLD_KILLED): Likewise.
(CLD_DUMPED): Likewise.
(CLD_TRAPPED): Likewise.
(CLD_STOPPED): Likewise.
(CLD_CONTINUED): Likewise.
(POLL_IN): Likewise.
(POLL_OUT): Likewise.
(POLL_MSG): Likewise.
(POLL_ERR): Likewise.
(POLL_PRI): Likewise.
(POLL_HUP): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/siginfo.h (ILL_ILLOPC):
Likewise.
(ILL_ILLOPN): Likewise.
(ILL_ILLADR): Likewise.
(ILL_ILLTRP): Likewise.
(ILL_PRVOPC): Likewise.
(ILL_PRVREG): Likewise.
(ILL_COPROC): Likewise.
(ILL_BADSTK): Likewise.
(FPE_INTDIV): Likewise.
(FPE_INTOVF): Likewise.
(FPE_FLTDIV): Likewise.
(FPE_FLTOVF): Likewise.
(FPE_FLTUND): Likewise.
(FPE_FLTRES): Likewise.
(FPE_FLTINV): Likewise.
(FPE_FLTSUB): Likewise.
(SEGV_MAPERR): Likewise.
(SEGV_ACCERR): Likewise.
(BUS_ADRALN): Likewise.
(BUS_ADRERR): Likewise.
(BUS_OBJERR): Likewise.
(BUS_MCEERR_AR): Likewise.
(BUS_MCEERR_AO): Likewise.
(TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED].
(TRAP_TRACE): Likewise.
(CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED ||
__USE_XOPEN2K8].
(CLD_KILLED): Likewise.
(CLD_DUMPED): Likewise.
(CLD_TRAPPED): Likewise.
(CLD_STOPPED): Likewise.
(CLD_CONTINUED): Likewise.
(POLL_IN): Likewise.
(POLL_OUT): Likewise.
(POLL_MSG): Likewise.
(POLL_ERR): Likewise.
(POLL_PRI): Likewise.
(POLL_HUP): Likewise.
* sysdeps/unix/sysv/linux/bits/siginfo.h (ILL_ILLOPC): Likewise.
(ILL_ILLOPN): Likewise.
(ILL_ILLADR): Likewise.
(ILL_ILLTRP): Likewise.
(ILL_PRVOPC): Likewise.
(ILL_PRVREG): Likewise.
(ILL_COPROC): Likewise.
(ILL_BADSTK): Likewise.
(FPE_INTDIV): Likewise.
(FPE_INTOVF): Likewise.
(FPE_FLTDIV): Likewise.
(FPE_FLTOVF): Likewise.
(FPE_FLTUND): Likewise.
(FPE_FLTRES): Likewise.
(FPE_FLTINV): Likewise.
(FPE_FLTSUB): Likewise.
(SEGV_MAPERR): Likewise.
(SEGV_ACCERR): Likewise.
(BUS_ADRALN): Likewise.
(BUS_ADRERR): Likewise.
(BUS_OBJERR): Likewise.
(BUS_MCEERR_AR): Likewise.
(BUS_MCEERR_AO): Likewise.
(TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED].
(TRAP_TRACE): Likewise.
(CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED ||
__USE_XOPEN2K8].
(CLD_KILLED): Likewise.
(CLD_DUMPED): Likewise.
(CLD_TRAPPED): Likewise.
(CLD_STOPPED): Likewise.
(CLD_CONTINUED): Likewise.
(POLL_IN): Likewise.
(POLL_OUT): Likewise.
(POLL_MSG): Likewise.
(POLL_ERR): Likewise.
(POLL_PRI): Likewise.
(POLL_HUP): Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/siginfo.h (ILL_ILLOPC):
Likewise.
(ILL_ILLOPN): Likewise.
(ILL_ILLADR): Likewise.
(ILL_ILLTRP): Likewise.
(ILL_PRVOPC): Likewise.
(ILL_PRVREG): Likewise.
(ILL_COPROC): Likewise.
(ILL_BADSTK): Likewise.
(ILL_BADIADDR): Likewise.
(ILL_BREAK): Likewise.
(FPE_INTDIV): Likewise.
(FPE_INTOVF): Likewise.
(FPE_FLTDIV): Likewise.
(FPE_FLTOVF): Likewise.
(FPE_FLTUND): Likewise.
(FPE_FLTRES): Likewise.
(FPE_FLTINV): Likewise.
(FPE_FLTSUB): Likewise.
(FPE_DECOVF): Likewise.
(FPE_DECDIV): Likewise.
(FPE_DECERR): Likewise.
(FPE_INVASC): Likewise.
(FPE_INVDEC): Likewise.
(SEGV_MAPERR): Likewise.
(SEGV_ACCERR): Likewise.
(SEGV_PSTKOVF): Likewise.
(BUS_ADRALN): Likewise.
(BUS_ADRERR): Likewise.
(BUS_OBJERR): Likewise.
(BUS_MCEERR_AR): Likewise.
(BUS_MCEERR_AO): Likewise.
(TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED].
(TRAP_TRACE): Likewise.
(TRAP_BRANCH): Likewise.
(TRAP_HWBKPT): Likewise.
(CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED ||
__USE_XOPEN2K8].
(CLD_KILLED): Likewise.
(CLD_DUMPED): Likewise.
(CLD_TRAPPED): Likewise.
(CLD_STOPPED): Likewise.
(CLD_CONTINUED): Likewise.
(POLL_IN): Likewise.
(POLL_OUT): Likewise.
(POLL_MSG): Likewise.
(POLL_ERR): Likewise.
(POLL_PRI): Likewise.
(POLL_HUP): Likewise.
* sysdeps/unix/sysv/linux/mips/bits/siginfo.h (ILL_ILLOPC): Likewise.
(ILL_ILLOPN): Likewise.
(ILL_ILLADR): Likewise.
(ILL_ILLTRP): Likewise.
(ILL_PRVOPC): Likewise.
(ILL_PRVREG): Likewise.
(ILL_COPROC): Likewise.
(ILL_BADSTK): Likewise.
(FPE_INTDIV): Likewise.
(FPE_INTOVF): Likewise.
(FPE_FLTDIV): Likewise.
(FPE_FLTOVF): Likewise.
(FPE_FLTUND): Likewise.
(FPE_FLTRES): Likewise.
(FPE_FLTINV): Likewise.
(FPE_FLTSUB): Likewise.
(SEGV_MAPERR): Likewise.
(SEGV_ACCERR): Likewise.
(BUS_ADRALN): Likewise.
(BUS_ADRERR): Likewise.
(BUS_OBJERR): Likewise.
(BUS_MCEERR_AR): Likewise.
(BUS_MCEERR_AO): Likewise.
(TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED].
(TRAP_TRACE): Likewise.
(CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED ||
__USE_XOPEN2K8].
(CLD_KILLED): Likewise.
(CLD_DUMPED): Likewise.
(CLD_TRAPPED): Likewise.
(CLD_STOPPED): Likewise.
(CLD_CONTINUED): Likewise.
(POLL_IN): Likewise.
(POLL_OUT): Likewise.
(POLL_MSG): Likewise.
(POLL_ERR): Likewise.
(POLL_PRI): Likewise.
(POLL_HUP): Likewise.
* sysdeps/unix/sysv/linux/s390/bits/siginfo.h (ILL_ILLOPC): Likewise.
(ILL_ILLOPN): Likewise.
(ILL_ILLADR): Likewise.
(ILL_ILLTRP): Likewise.
(ILL_PRVOPC): Likewise.
(ILL_PRVREG): Likewise.
(ILL_COPROC): Likewise.
(ILL_BADSTK): Likewise.
(FPE_INTDIV): Likewise.
(FPE_INTOVF): Likewise.
(FPE_FLTDIV): Likewise.
(FPE_FLTOVF): Likewise.
(FPE_FLTUND): Likewise.
(FPE_FLTRES): Likewise.
(FPE_FLTINV): Likewise.
(FPE_FLTSUB): Likewise.
(SEGV_MAPERR): Likewise.
(SEGV_ACCERR): Likewise.
(BUS_ADRALN): Likewise.
(BUS_ADRERR): Likewise.
(BUS_OBJERR): Likewise.
(BUS_MCEERR_AR): Likewise.
(BUS_MCEERR_AO): Likewise.
(TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED].
(TRAP_TRACE): Likewise.
(CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED ||
__USE_XOPEN2K8].
(CLD_KILLED): Likewise.
(CLD_DUMPED): Likewise.
(CLD_TRAPPED): Likewise.
(CLD_STOPPED): Likewise.
(CLD_CONTINUED): Likewise.
(POLL_IN): Likewise.
(POLL_OUT): Likewise.
(POLL_MSG): Likewise.
(POLL_ERR): Likewise.
(POLL_PRI): Likewise.
(POLL_HUP): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/siginfo.h (ILL_ILLOPC): Likewise.
(ILL_ILLOPN): Likewise.
(ILL_ILLADR): Likewise.
(ILL_ILLTRP): Likewise.
(ILL_PRVOPC): Likewise.
(ILL_PRVREG): Likewise.
(ILL_COPROC): Likewise.
(ILL_BADSTK): Likewise.
(FPE_INTDIV): Likewise.
(FPE_INTOVF): Likewise.
(FPE_FLTDIV): Likewise.
(FPE_FLTOVF): Likewise.
(FPE_FLTUND): Likewise.
(FPE_FLTRES): Likewise.
(FPE_FLTINV): Likewise.
(FPE_FLTSUB): Likewise.
(SEGV_MAPERR): Likewise.
(SEGV_ACCERR): Likewise.
(BUS_ADRALN): Likewise.
(BUS_ADRERR): Likewise.
(BUS_OBJERR): Likewise.
(BUS_MCEERR_AR): Likewise.
(BUS_MCEERR_AO): Likewise.
(TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED].
(TRAP_TRACE): Likewise.
(CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED ||
__USE_XOPEN2K8].
(CLD_KILLED): Likewise.
(CLD_DUMPED): Likewise.
(CLD_TRAPPED): Likewise.
(CLD_STOPPED): Likewise.
(CLD_CONTINUED): Likewise.
(POLL_IN): Likewise.
(POLL_OUT): Likewise.
(POLL_MSG): Likewise.
(POLL_ERR): Likewise.
(POLL_PRI): Likewise.
(POLL_HUP): Likewise.
* sysdeps/unix/sysv/linux/tile/bits/siginfo.h (ILL_ILLOPC): Likewise.
(ILL_ILLOPN): Likewise.
(ILL_ILLADR): Likewise.
(ILL_ILLTRP): Likewise.
(ILL_PRVOPC): Likewise.
(ILL_PRVREG): Likewise.
(ILL_COPROC): Likewise.
(ILL_BADSTK): Likewise.
(ILL_DBLFLT): Likewise.
(ILL_HARDWALL): Likewise.
(FPE_INTDIV): Likewise.
(FPE_INTOVF): Likewise.
(FPE_FLTDIV): Likewise.
(FPE_FLTOVF): Likewise.
(FPE_FLTUND): Likewise.
(FPE_FLTRES): Likewise.
(FPE_FLTINV): Likewise.
(FPE_FLTSUB): Likewise.
(SEGV_MAPERR): Likewise.
(SEGV_ACCERR): Likewise.
(BUS_ADRALN): Likewise.
(BUS_ADRERR): Likewise.
(BUS_OBJERR): Likewise.
(BUS_MCEERR_AR): Likewise.
(BUS_MCEERR_AO): Likewise.
(TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED].
(TRAP_TRACE): Likewise.
(CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED ||
__USE_XOPEN2K8].
(CLD_KILLED): Likewise.
(CLD_DUMPED): Likewise.
(CLD_TRAPPED): Likewise.
(CLD_STOPPED): Likewise.
(CLD_CONTINUED): Likewise.
(POLL_IN): Likewise.
(POLL_OUT): Likewise.
(POLL_MSG): Likewise.
(POLL_ERR): Likewise.
(POLL_PRI): Likewise.
(POLL_HUP): Likewise.
* sysdeps/unix/sysv/linux/x86/bits/siginfo.h (ILL_ILLOPC): Likewise.
(ILL_ILLOPN): Likewise.
(ILL_ILLADR): Likewise.
(ILL_ILLTRP): Likewise.
(ILL_PRVOPC): Likewise.
(ILL_PRVREG): Likewise.
(ILL_COPROC): Likewise.
(ILL_BADSTK): Likewise.
(FPE_INTDIV): Likewise.
(FPE_INTOVF): Likewise.
(FPE_FLTDIV): Likewise.
(FPE_FLTOVF): Likewise.
(FPE_FLTUND): Likewise.
(FPE_FLTRES): Likewise.
(FPE_FLTINV): Likewise.
(FPE_FLTSUB): Likewise.
(SEGV_MAPERR): Likewise.
(SEGV_ACCERR): Likewise.
(BUS_ADRALN): Likewise.
(BUS_ADRERR): Likewise.
(BUS_OBJERR): Likewise.
(BUS_MCEERR_AR): Likewise.
(BUS_MCEERR_AO): Likewise.
(TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED].
(TRAP_TRACE): Likewise.
(CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED ||
__USE_XOPEN2K8].
(CLD_KILLED): Likewise.
(CLD_DUMPED): Likewise.
(CLD_TRAPPED): Likewise.
(CLD_STOPPED): Likewise.
(CLD_CONTINUED): Likewise.
(POLL_IN): Likewise.
(POLL_OUT): Likewise.
(POLL_MSG): Likewise.
(POLL_ERR): Likewise.
(POLL_PRI): Likewise.
(POLL_HUP): Likewise.
* conform/Makefile (test-xfail-POSIX/signal.h/conform): Remove.
(test-xfail-POSIX/sys/wait.h/conform): Likewise.
Joseph Myers [Fri, 7 Mar 2014 20:54:03 +0000 (20:54 +0000)]
Include all of <time.h> from <sched.h> for older standards (bug 16670).
This patch fixes one of the header namespace issues shown up by
conformtest, <sched.h> failing to expose all symbols from <time.h> as
required by older standards. The patch keeps the existing behavior if
__USE_XOPEN2K is defined (the default; POSIX.1-2001 was the version
that made it optional to expose these symbols), but ensures that all
the symbols from <time.h> are exposed if an older standard is
selected. Tested x86_64.
[BZ #16670]
* posix/sched.h [!__USE_XOPEN2K] (__need_time_t): Don't define
before #include of <time.h>.
[!__USE_XOPEN2K] (__need_timespec): Likewise.
* conform/Makefile (test-xfail-POSIX/sched.h/conform): Remove.
(test-xfail-UNIX98/sched.h/conform): Likewise.
Marcus Shawcroft [Fri, 7 Mar 2014 14:05:20 +0000 (14:05 +0000)]
[PATCH] [AArch64] Optional trapping exceptions support.
Trapping exceptions in AArch64 are optional. The relevant exception
control bits in FPCR are are defined as RES0 hence the absence of
support can be detected by reading back the FPCR and comparing with
the desired value.
Joseph Myers [Fri, 7 Mar 2014 03:31:41 +0000 (03:31 +0000)]
Count miscellaneous files built on host for testing as tests.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> I
raised the question of counting miscellaneous dependencies of tests,
built on the host rather than the build system, as tests, so that when
test failures don't stop "make check" neither do those other builds on
the host, so that a flaky host doesn't stop "make check" from
producing a complete summary of test results. Brooks supported that
idea in <https://sourceware.org/ml/libc-alpha/2014-02/msg00301.html>.
This patch implements that change for all the examples I could find:
one message catalog in catgets/, locales in localedata/ and timezone
files in timezone/.
Tested x86_64.
* catgets/Makefile (tests-special): Add $(objpfx)sample.SJIS.cat.
($(objpfx)sample.SJIS.cat): Use $(evaluate-test).
* timezone/Makefile (testdata): Move definition above include of
Rules.
(test-zones): New variable.
(tests-special): Add zone files.
(build-testdata): Use $(evaluate-test).
localedata/ChangeLog:
* Makefile (LOCALES): Move definition above include of Rules.
(LOCALE_SRCS): Likewise.
(CHARMAPS): Likewise.
(CTYPE_FILES): Likewise.
(tests-special): Add locale files.
($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(evaluate-test).
Joseph Myers [Fri, 7 Mar 2014 03:29:23 +0000 (03:29 +0000)]
Make tests consistently use *.out output files.
This patch systematically renames miscellaneous tests so their outputs
use a *.out name (unless the test is just running some glibc program
with its conventional output file name, rather than a special program
at all, as in catgets tests generating *.cat). In the case of the
iconv test test-iconvconfig, output is redirected where it wasn't
before.
In various places the "generated" variable is updated to reflect the
revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading)
is also fixed. resolv/Makefile sets both "generate" (which appears
unused) and "generated". Bitrot in the settings of these variables
could no doubt be fixed so that "make clean" after build and testing
leaves results the same as after configure (and indeed the
tests-special / xtests-special variables could be used to simplify
things, by removing those files automatically rather than listing them
manually in these variables), and "make distclean" leaves an empty
build directory, but right now it appears various files don't get
deleted. I think they are liable to continue to bitrot in the absence
of routine testing that these targets actually work, given that
building in the source directory isn't supported and that was the main
use of such makefile targets.
Tested x86_64.
* elf/Makefile (tests-special): Rename tests to end with .out.
($(objpfx)noload-mem): Likewise.
($(objpfx)tst-leaks1-mem): Likewise.
($(objpfx)tst-leaks1-static-mem.out): Likewise.
* iconv/Makefile (xtests-special): Change test-iconvconfig to
$(objpfx)test-iconvconfig.out.
(test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use
set -e inside subshell and redirect output to file.
* iconvdata/Makefile (generated): Rename tests to end with .out.
Correct type.
(tests-special): Rename tests to end with .out.
($(objpfx)mtrace-tst-loading): Likewise.
* intl/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)mtrace-tst-gettext): Likewise.
* misc/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)tst-error1-mem): Likewise.
* nptl/Makefile (tests-special): Likewise.
($(objpfx)tst-stack3-mem): Likewise.
(generated): Likewise.
* posix/Makefile (generated): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
($(objpfx)tst-fnmatch-mem): Likewise.
($(objpfx)bug-regex2-mem): Likewise.
($(objpfx)bug-regex14-mem): Likewise.
($(objpfx)bug-regex21-mem): Likewise.
($(objpfx)bug-regex31-mem): Likewise.
($(objpfx)tst-vfork3-mem): Likewise.
($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
($(objpfx)tst-pcre-mem): Likewise.
($(objpfx)tst-boost-mem): Likewise.
($(objpfx)bug-ga2-mem): Likewise.
($(objpfx)bug-glob2-mem): Likewise.
* resolv/Makefile (generate): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
(generated): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
($(objpfx)mtrace-tst-leaks2): Likewise.
localedata:
* Makefile (generated): Rename tests to end with .out.
(tests-special): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
Joseph Myers [Fri, 7 Mar 2014 03:25:57 +0000 (03:25 +0000)]
Generate overall summary of test results.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00197.html>, makes
testsuite runs generate an overall summary of test results.
A new script merge-test-results.sh deals both with collecting results
within a directory to a file with all the results from that directory,
and collecting the results from subdirectories into a single overall
file (there's not much in common between the two modes of operation of
the script, but it seemed silly to have two separate scripts for
this). Within a directory, missing results produce UNRESOLVED lines;
at top level, missing results for a whole directory produce an ERROR
line (since toplevel can't identify what the specific missing tests
are in this case).
Note that this does not change the rules for when "make" considers
there has been an error, or terminates, so unexpected failures will
still cause make to terminate, or, with -k, mean the commands for
"tests" don't get run because of failure of a dependency.
Tested x86_64, including that the summary does in fact reflect all the
tests with .test-result files.
* scripts/merge-test-results.sh: New file.
* Makefile (tests-special-notdir): New variable.
(tests): Run merge-test-results.sh.
(xtests): Likewise.
* Rules (tests-special-notdir): New variable.
(xtests-special-notdir): Likewise.
(tests): Run merge-test-results.sh
(xtests): Likewise.
Joseph Myers [Fri, 7 Mar 2014 03:23:34 +0000 (03:23 +0000)]
conformtest: split up running of tests from makefile.
This patch changes the logic by which header conformance tests are run
so that the makefiles run the tests for each (standard, header) pair
separately rather than as a single test (there are 518 such pairs
being tested at present).
Since these tests are slow and previously couldn't be run in parallel,
this obviously speeds up the whole test run significantly when using
parallel testing. There are other benefits. These tests can now be
marked as expected to fail at the level of (standard, header) pairs,
meaning that regressions introduced by a header change are much more
likely to be spotted (of course, such a regression could be a bug in
the header or in the expectations, most of which have not been
properly checked against the relevant standards).
The patch introduces lists in conform/Makefile of the headers to test
for each standard, with a new (quick) test for each standard that the
list agrees with the set of headers for which there are in fact
nonempty expectations for that standard. This means that each of the
518 pairs being tested is actually something meaningful to test rather
than a null test. I also hope to use these lists of headers in
various standards in future tests for namespace violations where a
function in a standard is implemented to call a non-reserved name for
a function outside that standard.
Although there are a lot of tests now marked as expected to fail, I
expect most of those to be easy to fix (whether with fixes to the
expectations, the headers or both - if fixing a header bug, of course
file it in Bugzilla first); only a limited number are likely to
reflect actual missing features in glibc.
Tested x86_64 (GCC 4.7 branch). It's quite possible some failures
vary from platform to platform, in which case either additional XFAILs
can be added here, or platform-specific header bugs (if applicable)
the failures show up can be fixed. I made XFAILs unconditional for
tests that should only fail for GCC 4.6 and earlier; we could make the
GCC version available in the makefiles and condition these, but simply
moving the XFAILing to a finer granularity seems a clear improvement
on the previous state of the whole of conformtest being XFAILed.
* Makeconfig (test-xfail-name): New variable.
(evaluate-test): Use $(test-xfail-name) instead of $(@F:.out=) to
compute variable name for expected failures.
* conform/Makefile (conformtest-headers-data): New variable.
(conformtest-standards): Likewise.
(conformtest-headers-ISO): Likewise.
(conformtest-headers-ISO99): Likewise.
(conformtest-headers-ISO11): Likewise.
(conformtest-headers-POSIX): Likewise.
(conformtest-headers-XPG3): Likewise.
(conformtest-headers-XPG4): Likewise.
(conformtest-headers-UNIX98): Likewise.
(conformtest-headers-XOPEN2K): Likewise.
(conformtest-headers-POSIX2008): Likewise.
(conformtest-headers-XOPEN2K8): Likewise.
(conformtest-header-list-base): Likewise.
(conformtest-header-list-tests): Likewise.
(conformtest-header-base): Likewise.
(conformtest-header-tests): Likewise.
(tests-special): Add $(conformtest-header-list-tests). If
[$(fast-check) && !$(cross-compiling)], add
$(conformtest-header-tests) instead of
$(objpfx)run-conformtest.out.
(generated): Add $(conformtest-header-list-base). If
[$(fast-check) && !$(cross-compiling)], add
$(conformtest-header-base). Remove previous setting.
($(conformtest-header-list-tests)): New target.
(test-xfail-run-conformtest): Remove variable.
($(objpfx)run-conformtest.out): Remove target.
(test-xfail-ISO11/complex.h/conform): New variable.
(test-xfail-ISO11/stdalign.h/conform): Likewise.
(test-xfail-ISO11/stdnoreturn.h/conform): Likewise.
(test-xfail-XPG3/varargs.h/conform): Likewise.
(test-xfail-XPG4/varargs.h/conform): Likewise.
(test-xfail-UNIX98/varargs.h/conform): Likewise.
(test-xfail-XPG4/ndbm.h/conform): Likewise.
(test-xfail-UNIX98/ndbm.h/conform): Likewise.
(test-xfail-XOPEN2K/ndbm.h/conform): Likewise.
(test-xfail-XOPEN2K8/ndbm.h/conform): Likewise.
(test-xfail-XPG3/fcntl.h/conform): Likewise.
(test-xfail-XPG3/ftw.h/conform): Likewise.
(test-xfail-XPG3/grp.h/conform): Likewise.
(test-xfail-XPG3/langinfo.h/conform): Likewise.
(test-xfail-XPG3/limits.h/conform): Likewise.
(test-xfail-XPG3/pwd.h/conform): Likewise.
(test-xfail-XPG3/search.h/conform): Likewise.
(test-xfail-XPG3/signal.h/conform): Likewise.
(test-xfail-XPG3/stdio.h/conform): Likewise.
(test-xfail-XPG3/stdlib.h/conform): Likewise.
(test-xfail-XPG3/string.h/conform): Likewise.
(test-xfail-XPG3/sys/ipc.h/conform): Likewise.
(test-xfail-XPG3/sys/msg.h/conform): Likewise.
(test-xfail-XPG3/sys/sem.h/conform): Likewise.
(test-xfail-XPG3/sys/shm.h/conform): Likewise.
(test-xfail-XPG3/sys/stat.h/conform): Likewise.
(test-xfail-XPG3/sys/types.h/conform): Likewise.
(test-xfail-XPG3/sys/wait.h/conform): Likewise.
(test-xfail-XPG3/termios.h/conform): Likewise.
(test-xfail-XPG3/time.h/conform): Likewise.
(test-xfail-XPG3/unistd.h/conform): Likewise.
(test-xfail-XPG4/arpa/inet.h/conform): Likewise.
(test-xfail-XPG4/fcntl.h/conform): Likewise.
(test-xfail-XPG4/langinfo.h/conform): Likewise.
(test-xfail-XPG4/netdb.h/conform): Likewise.
(test-xfail-XPG4/netinet/in.h/conform): Likewise.
(test-xfail-XPG4/signal.h/conform): Likewise.
(test-xfail-XPG4/stdio.h/conform): Likewise.
(test-xfail-XPG4/stdlib.h/conform): Likewise.
(test-xfail-XPG4/stropts.h/conform): Likewise.
(test-xfail-XPG4/sys/ipc.h/conform): Likewise.
(test-xfail-XPG4/sys/msg.h/conform): Likewise.
(test-xfail-XPG4/sys/sem.h/conform): Likewise.
(test-xfail-XPG4/sys/shm.h/conform): Likewise.
(test-xfail-XPG4/sys/socket.h/conform): Likewise.
(test-xfail-XPG4/sys/stat.h/conform): Likewise.
(test-xfail-XPG4/sys/time.h/conform): Likewise.
(test-xfail-XPG4/sys/types.h/conform): Likewise.
(test-xfail-XPG4/sys/wait.h/conform): Likewise.
(test-xfail-XPG4/termios.h/conform): Likewise.
(test-xfail-XPG4/ucontext.h/conform): Likewise.
(test-xfail-XPG4/unistd.h/conform): Likewise.
(test-xfail-XPG4/utmpx.h/conform): Likewise.
(test-xfail-POSIX/sched.h/conform): Likewise.
(test-xfail-POSIX/signal.h/conform): Likewise.
(test-xfail-POSIX/sys/wait.h/conform): Likewise.
(test-xfail-POSIX/tar.h/conform): Likewise.
(test-xfail-UNIX98/arpa/inet.h/conform): Likewise.
(test-xfail-UNIX98/fcntl.h/conform): Likewise.
(test-xfail-UNIX98/langinfo.h/conform): Likewise.
(test-xfail-UNIX98/netdb.h/conform): Likewise.
(test-xfail-UNIX98/netinet/in.h/conform): Likewise.
(test-xfail-UNIX98/sched.h/conform): Likewise.
(test-xfail-UNIX98/signal.h/conform): Likewise.
(test-xfail-UNIX98/stdio.h/conform): Likewise.
(test-xfail-UNIX98/stdlib.h/conform): Likewise.
(test-xfail-UNIX98/stropts.h/conform): Likewise.
(test-xfail-UNIX98/sys/ipc.h/conform): Likewise.
(test-xfail-UNIX98/sys/msg.h/conform): Likewise.
(test-xfail-UNIX98/sys/sem.h/conform): Likewise.
(test-xfail-UNIX98/sys/shm.h/conform): Likewise.
(test-xfail-UNIX98/sys/socket.h/conform): Likewise.
(test-xfail-UNIX98/sys/time.h/conform): Likewise.
(test-xfail-UNIX98/sys/wait.h/conform): Likewise.
(test-xfail-UNIX98/ucontext.h/conform): Likewise.
(test-xfail-UNIX98/unistd.h/conform): Likewise.
(test-xfail-UNIX98/utmpx.h/conform): Likewise.
(test-xfail-XOPEN2K/aio.h/conform): Likewise.
(test-xfail-XOPEN2K/arpa/inet.h/conform): Likewise.
(test-xfail-XOPEN2K/fcntl.h/conform): Likewise.
(test-xfail-XOPEN2K/langinfo.h/conform): Likewise.
(test-xfail-XOPEN2K/math.h/conform): Likewise.
(test-xfail-XOPEN2K/mqueue.h/conform): Likewise.
(test-xfail-XOPEN2K/netdb.h/conform): Likewise.
(test-xfail-XOPEN2K/netinet/in.h/conform): Likewise.
(test-xfail-XOPEN2K/semaphore.h/conform): Likewise.
(test-xfail-XOPEN2K/signal.h/conform): Likewise.
(test-xfail-XOPEN2K/stdarg.h/conform): Likewise.
(test-xfail-XOPEN2K/stdio.h/conform): Likewise.
(test-xfail-XOPEN2K/stropts.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/ipc.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/msg.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/sem.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/shm.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/socket.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K/termios.h/conform): Likewise.
(test-xfail-XOPEN2K/tgmath.h/conform): Likewise.
(test-xfail-XOPEN2K/ucontext.h/conform): Likewise.
(test-xfail-XOPEN2K/utmpx.h/conform): Likewise.
(test-xfail-POSIX2008/arpa/inet.h/conform): Likewise.
(test-xfail-POSIX2008/fcntl.h/conform): Likewise.
(test-xfail-POSIX2008/netdb.h/conform): Likewise.
(test-xfail-POSIX2008/netinet/in.h/conform): Likewise.
(test-xfail-POSIX2008/signal.h/conform): Likewise.
(test-xfail-POSIX2008/stropts.h/conform): Likewise.
(test-xfail-POSIX2008/sys/socket.h/conform): Likewise.
(test-xfail-POSIX2008/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K8/arpa/inet.h/conform): Likewise.
(test-xfail-XOPEN2K8/fcntl.h/conform): Likewise.
(test-xfail-XOPEN2K8/limits.h/conform): Likewise.
(test-xfail-XOPEN2K8/math.h/conform): Likewise.
(test-xfail-XOPEN2K8/netdb.h/conform): Likewise.
(test-xfail-XOPEN2K8/netinet/in.h/conform): Likewise.
(test-xfail-XOPEN2K8/signal.h/conform): Likewise.
(test-xfail-XOPEN2K8/stdio.h/conform): Likewise.
(test-xfail-XOPEN2K8/stropts.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/ipc.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/msg.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/select.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/sem.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/shm.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/socket.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/time.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K8/termios.h/conform): Likewise.
(test-xfail-XOPEN2K8/tgmath.h/conform): Likewise.
(test-xfail-XOPEN2K8/utmpx.h/conform): Likewise.
(conformtest-cc-flags): Likewise.
($(conformtest-header-tests): New target.
* conform/check-header-lists.sh: New file.
* conform/run-conformtest.sh: Remove.
Joseph Myers [Fri, 7 Mar 2014 03:21:04 +0000 (03:21 +0000)]
conformtest: clean up POSIX expectations for semaphore.h, signal.h, tar.h.
Continuing the series of patches to clean up conformtest expectations
for "POSIX" (1995/6) based on review of the expectations against the
standard, this patch cleans up those for semaphore.h, signal.h and
tar.h (including various corrections for other standards for the
expectations affected by this patch). Tested x86_64.
(Some of the failures for signal.h shown up by this patch correcting
expectations for that header are among the reasons for posix/annexc
being expected to fail. The goal is for conformtest eventually to
replace posix/annexc and stdlib/isomac once it has all relevant
functionality, and for the loop over standards and headers in
conformtest to convert to separate makefile targets for each
combination, so they can be run in parallel and so that xfails can be
more specific than the present xfailing of the whole of conformtest.)
* conform/conformtest.pl: Allow ' and \ in values given for
constants.
* conform/data/semaphore.h-data [POSIX] (fcntl.h): Allow header
inclusion.
[POSIX] (sys/types.h): Likewise.
[POSIX2008 || XOPEN2K8] (sys/types.h): Don't allow header
inclusion.
[POSIX || UNIX98 || XOPEN2K] (time.h): Don't allow header
inclusion.
* conform/data/signal.h-data (SIGIO): Remove expectation.
[XPG3] (SIGBUS): Do not expect.
[POSIX || XPG3] (SIGPOLL): Likewise.
[POSIX || XPG3] (SIGPROF): Likewise.
[POSIX || XPG3] (SIGSYS): Likewise.
[XPG3] (SIGTRAP): Likewise.
[POSIX || XPG3] (SIGURG): Likewise.
[POSIX || XPG3] (SIGVTALRM): Likewise.
[POSIX || XPG3] (SIGXCPU): Likewise.
[POSIX || XPG3] (SIGXFSZ): Likewise.
[POSIX] (SA_SIGINFO): Expect.
[XPG3] (siginfo_t): Do not expect type or contents.
[POSIX] (si_pid): Do not expect element.
[POSIX] (si_uid): Likewise.
[POSIX] (si_addr): Likewise.
[POSIX] (si_status): Likewise.
[POSIX] (si_band): Likewise.
[XPG4] (si_value): Likewise.
[POSIX || XPG3] (ILL_ILLOPC): Do not expect.
[POSIX || XPG3] (ILL_ILLOPN): Likewise.
[POSIX || XPG3] (ILL_ILLADR): Likewise.
[POSIX || XPG3] (ILL_ILLTRP): Likewise.
[POSIX || XPG3] (ILL_PRVOPC): Likewise.
[POSIX || XPG3] (ILL_PRVREG): Likewise.
[POSIX || XPG3] (ILL_COPROC): Likewise.
[POSIX || XPG3] (ILL_BADSTK): Likewise.
[POSIX || XPG3] (FPE_INTDIV): Likewise.
[POSIX || XPG3] (FPE_INTOVF): Likewise.
[POSIX || XPG3] (FPE_FLTDIV): Likewise.
[POSIX || XPG3] (FPE_FLTOVF): Likewise.
[POSIX || XPG3] (FPE_FLTUND): Likewise.
[POSIX || XPG3] (FPE_FLTRES): Likewise.
[POSIX || XPG3] (FPE_FLTINV): Likewise.
[POSIX || XPG3] (FPE_FLTSUB): Likewise.
[POSIX || XPG3] (SEGV_MAPERR): Likewise.
[POSIX || XPG3] (SEGV_ACCERR): Likewise.
[POSIX || XPG3] (BUS_ADRALN): Likewise.
[POSIX || XPG3] (BUS_ADRERR): Likewise.
[POSIX || XPG3] (BUS_OBJERR): Likewise.
[POSIX || XPG3] (CLD_EXITED): Likewise.
[POSIX || XPG3] (CLD_KILLED): Likewise.
[POSIX || XPG3] (CLD_DUMPED): Likewise.
[POSIX || XPG3] (CLD_TRAPPED): Likewise.
[POSIX || XPG3] (CLD_STOPPED): Likewise.
[POSIX || XPG3] (CLD_CONTINUED): Likewise.
[POSIX || XPG3] (POLL_IN): Likewise.
[POSIX || XPG3] (POLL_OUT): Likewise.
[POSIX || XPG3] (POLL_MSG): Likewise.
[POSIX || XPG3] (POLL_ERR): Likewise.
[POSIX || XPG3] (POLL_PRI): Likewise.
[POSIX || XPG3] (POLL_HUP): Likewise.
[POSIX || XPG3 || POSIX2008] (TRAP_BRKPT): Likewise.
[POSIX || XPG3 || POSIX2008] (TRAP_TRACE): Likewise.
(SIG*): Do not allow.
[XPG3] (si_*): Likewise.
[XPG3] (SI_*): Likewise.
[XPG3 || XPG4] (sigev_*): Likewise.
[XPG3 || XPG4] (SIGEV_*): Likewise.
[XPG3 || XPG4] (sival_*): Likewise.
[POSIX || XPG3 || XPG4] (uc_*): Likewise.
[POSIX || XPG3] (BUS_*): Likewise.
[POSIX || XPG3] (CLD_*): Likewise.
[POSIX || XPG3] (FPE_*): Likewise.
[POSIX || XPG3] (ILL_*): Likewise.
[POSIX || XPG3] (POLL_*): Likewise.
[POSIX || XPG3] (SEGV_*): Likewise.
[POSIX || XPG3 || POSIX2008] (SS_*): Likewise.
[POSIX || XPG3 || POSIX2008] (SV_*): Likewise.
[POSIX || XPG3 || POSIX2008] (TRAP_*): Likewise.
[POSIX || XPG3 || POSIX2008] (ss_*): Likewise.
[POSIX || XPG3 || POSIX2008] (sv_*): Likewise.
* conform/data/tar.h-data (TMAGLEN): Use macro-int-constant.
Specify type and value.
(TVERSLEN): Likewise.
(REGTYPE): Likewise.
(AREGTYPE): Likewise.
(LNKTYPE): Likewise.
(SYMTYPE): Likewise.
(CHRTYPE): Likewise.
(BLKTYPE): Likewise.
(DIRTYPE): Likewise.
(FIFOTYPE): Likewise.
(CONTTYPE): Likewise.
(TSUID): Likewise.
(TSGID): Likewise.
(TSVTX): Likewise.
(TUREAD): Likewise.
(TUWRITE): Likewise.
(TUEXEC): Likewise.
(TGREAD): Likewise.
(TGWRITE): Likewise.
(TGEXEC): Likewise.
(TOREAD): Likewise.
(TOWRITE): Likewise.
(TOEXEC): Likewise.
[POSIX] (TSVTX): Expect constant.
Joseph Myers [Thu, 6 Mar 2014 22:35:33 +0000 (22:35 +0000)]
Enumerate tests with special rules in tests-special variable.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
Joseph Myers [Thu, 6 Mar 2014 17:43:46 +0000 (17:43 +0000)]
conformtest: correct set of standards for which more headers are tested.
Continuing the corrections to which headers conformtest tests for
which standards, this patch corrects conformtest mistakes regarding
which headers to test for the remaining standards (XOPEN2K POSIX2008
XOPEN2K8). Tested x86_64.
2014-03-05 Joseph Myers <joseph@codesourcery.com>
* conform/data/netinet/tcp.h-data [POSIX2008 || XOPEN2K8]: Enable
whole file.
* conform/data/sys/timeb.h-data [POSIX2008 || XOPEN2K8]: Disable
whole file.
* conform/data/sys/uio.h-data [POSIX2008]: Likewise.
* conform/data/ucontext.h-data [POSIX2008 || XOPEN2K8]: Likewise.
Joseph Myers [Thu, 6 Mar 2014 17:42:03 +0000 (17:42 +0000)]
conformtest: correct set of standards for which some headers are tested.
Reviewing the sets of headers for which conformtest has expectations
for various standards showed up cases where headers had expectations
for standards not including those headers, or were missing
expectations for a standard that did include the header. This patch
fixes easy cases of this (largely disabling tests for standards for
which they are inapplicable). Tested x86_64.
* conform/data/aio.h-data [XPG3 || XPG4]: Disable whole file.
* conform/data/arpa/inet.h-data [XPG3]: Likewise.
* conform/data/dlfcn.h-data [XPG3 || XPG4]: Likewise.
* conform/data/fmtmsg.h-data [XPG3]: Likewise.
* conform/data/libgen.h-data [XPG3]: Likewise.
* conform/data/mqueue.h-data [XPG3 || XPG4]: Likewise.
* conform/data/ndbm.h-data [XPG3]: Likewise.
* conform/data/net/if.h-data [XPG3 || XPG4 || UNIX98]: Likewise.
* conform/data/netdb.h-data [XPG3]: Likewise.
* conform/data/netinet/in.h-data [XPG3]: Likewise.
* conform/data/poll.h-data [XPG3]: Likewise.
* conform/data/spawn.h-data [XPG3 || XPG4 || UNIX98]: Likewise.
* conform/data/strings.h-data [XPG3]: Likewise.
* conform/data/stropts.h-data [XPG3]: Likewise.
* conform/data/sys/mman.h-data [XPG3]: Likewise.
* conform/data/sys/resource.h-data [XPG3]: Likewise.
* conform/data/sys/select.h-data [XPG3 || XPG4 || UNIX98]:
Likewise.
* conform/data/sys/statvfs.h-data [XPG3]: Likewise.
* conform/data/sys/time.h-data [XPG3]: Likewise.
* conform/data/sys/timeb.h-data [XPG3]: Likewise.
* conform/data/sys/uio.h-data [XPG3]: Likewise.
* conform/data/sys/un.h-data [XPG3]: Likewise.
* conform/data/syslog.h-data [XPG3]: Likewise.
* conform/data/ucontext.h-data [XPG3]: Likewise.
* conform/data/utmpx.h-data [XPG3]: Likewise.
* conform/data/varargs.h-data [UNIX98]: Enable file.
Joseph Myers [Thu, 6 Mar 2014 15:57:24 +0000 (15:57 +0000)]
Remove INSTALL_INFO setting in manual/Makefile.
* manual/Makefile (INSTALL_INFO): Remove variable setting.
Joseph Myers [Thu, 6 Mar 2014 14:15:00 +0000 (14:15 +0000)]
Prepare libm-test.inc structures for multi-rounding-mode testing.
At present, libm-test.inc tests are run in multiple rounding modes by
having a separate array for each rounding mode (which might or might
not have the same test inputs as the other such arrays), a separate
function calling a RUN_TEST_LOOP_* macro over that array, and a
separate call to that function in main. The number of functions
tested in multiple rounding modes has gradually increased as
rounding-mode-specific bugs have been found and fixed in different
functions.
It would be better to be able to use a single macro call, in a single
function, to run tests for a function over all rounding modes, with
this being done for all libm functions except in cases where it's
deferred until some bugs can be fixed because XFAILing all affected
tests would be painful (that's why the full set of pow tests isn't
currently run in all rounding modes). This patch helps prepare for
that by making the structures storing expected results for tests store
results for all four rounding modes. After this patch, the results
for all modes are just duplicates, but tests access the appropriate
field in the structure, so helping to pave the way for when the fields
stop being duplicates and multiple rounding modes can be tested from a
single array. Tests might in future specify a single set of results,
to be used in all rounding modes; separate results for each rounding
mode, specified manually; or use of auto-libm-tests-* to generate
results for each rounding mode.
Tested x86_64.
* math/libm-test.inc (struct test_f_f_data): Move expected results
into structure for each rounding mode.
(struct test_ff_f_data): Likewise.
(struct test_ff_f_data_nexttoward): Likewise.
(struct test_fi_f_data): Likewise.
(struct test_fl_f_data): Likewise.
(struct test_if_f_data): Likewise.
(struct test_fff_f_data): Likewise.
(struct test_c_f_data): Likewise.
(struct test_f_f1_data): Likewise.
(struct test_fF_f1_data): Likewise.
(struct test_ffI_f1_data): Likewise.
(struct test_c_c_data): Likewise.
(struct test_cc_c_data): Likewise.
(struct test_f_i_data): Likewise.
(struct test_ff_i_data): Likewise.
(struct test_f_l_data): Likewise.
(struct test_f_L_data): Likewise.
(struct test_fFF_11_data): Likewise.
(RM_): New macro.
(RM_FE_DOWNWARD): Likewise.
(RM_FE_TONEAREST): Likewise.
(RM_FE_TOWARDZERO): Likewise.
(RM_FE_UPWARD): Likewise.
(RUN_TEST_LOOP_f_f): Update references to expected results.
(RUN_TEST_LOOP_2_f): Likewise.
(RUN_TEST_LOOP_fff_f): Likewise.
(RUN_TEST_LOOP_c_f): Likewise.
(RUN_TEST_LOOP_f_f1): Likewise.
(RUN_TEST_LOOP_fF_f1): Likewise.
(RUN_TEST_LOOP_fI_f1): Likewise.
(RUN_TEST_LOOP_ffI_f1): Likewise.
(RUN_TEST_LOOP_c_c): Likewise.
(RUN_TEST_LOOP_cc_c): Likewise.
(RUN_TEST_LOOP_f_i): Likewise.
(RUN_TEST_LOOP_f_i_tg): Likewise.
(RUN_TEST_LOOP_ff_i_tg): Likewise.
(RUN_TEST_LOOP_f_b): Likewise.
(RUN_TEST_LOOP_f_b_tg): Likewise.
(RUN_TEST_LOOP_f_l): Likewise.
(RUN_TEST_LOOP_f_L): Likewise.
(RUN_TEST_LOOP_fFF_11): Likewise.
* math/gen-libm-test.pl (parse_args): Output four copies of
expected results for each test.
Joseph Myers [Thu, 6 Mar 2014 14:13:18 +0000 (14:13 +0000)]
Don't define __ASSUME_UTIMES for linux-generic architectures.
The __ASSUME_UTIMES macro describes whether the utimes syscall is
present. For linux-generic architectures, it isn't (utimensat is
instead), so the macro should not be defined for them; this patch
removes the spurious definitions for such architectures. (Those
definitions don't actually cause any user-visible bug, because
futimes.c doesn't use __ASSUME_UTIMES if __ASSUME_UTIMENSAT is
defined, and futimesat.c and utimes.c are overridden for
linux-generic, but the definitions are still logically incorrect.)
* sysdeps/unix/sysv/linux/aarch64/kernel-features.h
(__ASSUME_UTIMES): Remove.
* sysdeps/unix/sysv/linux/tile/kernel-features.h
(__ASSUME_UTIMES): Likewise.
Joseph Myers [Thu, 6 Mar 2014 14:11:19 +0000 (14:11 +0000)]
Adjust how gen-auto-libm-tests handles before-rounding/after-rounding cases.
This patch changes gen-auto-libm-tests so that, when generating test
results that depend on whether the architecture has before-rounding or
after-rounding tininess detection, the :before-rounding or
:after-rounding conditions go on the exception / errno flags
generated, rather than generating two separate lines in
auto-libm-test-out for e.g. flt-32:before-rounding and
flt-32:after-rounding.
The rationale for this is as follows. It would be desirable for
testing a libm function in all rounding modes to require just one
function and array in libm-test.inc, not four (or five), with the
array of test data including expected results for all rounding modes
rather than separate arrays for each rounding mode that also need to
repeat all the test inputs. For gen-libm-test.pl to generate data for
such an array from auto-libm-test-out, it would be helpful if each
(format, test input) pair has exactly four lines in
auto-libm-test-out, one for each rounding mode, rather than some
rounding modes having just one line and some having two because the
exceptions depend on tininess detection.
Tested x86_64 and x86.
* math/gen-auto-libm-tests.c: Update comment on output format.
(output_for_one_input_case): Generate before-rounding and
after-rounding information as conditions on output flags not
floating-point format.
* math/auto-libm-test-out: Regenerated.
* math/gen-libm-test.pl (cond_value): New function.
(or_cond_value): Use cond_value.
(generate_testfile): Handle conditional exceptions.
Joseph Myers [Wed, 5 Mar 2014 15:05:20 +0000 (15:05 +0000)]
Automatically check sanity of ulps from libm tests.
This patch makes libm-test.inc apply sanity checks to ulps values
resulting from tests, or found in libm-test-ulps files, to avoid the
need for manual checking/editing of new ulps for cases that are
excessively large or involve functions that should not have any ulps.
For IBM long double, errors must be at most 14ulp (the largest
currently checked-in value), or at most 3ulp (the documented error
bound for division) in the case of exactly-determined functions; for
other formats, the limits are 9ulp (also the largest currently
checked-in value) and 0ulp. Limits from ulps files are saturated to
those bounds, and regen-ulps will ignore any errors outside those
bounds. (Thus if, say, you have an architecture-specific problem with
fma, the tests can still be XFAILed in auto-libm-test-in, but errors
outside the permitted range can no longer be listed in
libm-test-ulps.)
Tested x86_64.
* math/libm-test.inc (max_valid_error): New variable.
(init_max_error): Take new argument specifying whether function
results are exactly determined. Set max_valid_error and bound
other variables for errors based on this argument.
(set_max_error): Do not record results above max_valid_error.
(check_float_internal): Only accept errors of up to 0.5ulps if
also at most max_valid_error.
(START): Take new argument EXACT and pass it to init_max_error.
(acos_test): Update call to START.
(acos_test_tonearest): Likewise.
(acos_test_towardzero): Likewise.
(acos_test_downward): Likewise.
(acos_test_upward): Likewise.
(acosh_test): Likewise.
(asin_test): Likewise.
(asin_test_tonearest): Likewise.
(asin_test_towardzero): Likewise.
(asin_test_downward): Likewise.
(asin_test_upward): Likewise.
(asinh_test): Likewise.
(atan_test): Likewise.
(atanh_test): Likewise.
(atan2_test): Likewise.
(cabs_test): Likewise.
(cacos_test): Likewise.
(cacosh_test): Likewise.
(carg_test): Likewise.
(casin_test): Likewise.
(casinh_test): Likewise.
(catan_test): Likewise.
(catanh_test): Likewise.
(cbrt_test): Likewise.
(ccos_test): Likewise.
(ccosh_test): Likewise.
(ceil_test): Likewise.
(cexp_test): Likewise.
(cimag_test): Likewise.
(clog_test): Likewise.
(clog10_test): Likewise.
(conj_test): Likewise.
(copysign_test): Likewise.
(cos_test): Likewise.
(cos_test_tonearest): Likewise.
(cos_test_towardzero): Likewise.
(cos_test_downward): Likewise.
(cos_test_upward): Likewise.
(cosh_test): Likewise.
(cosh_test_tonearest): Likewise.
(cosh_test_towardzero): Likewise.
(cosh_test_downward): Likewise.
(cosh_test_upward): Likewise.
(cpow_test): Likewise.
(cproj_test): Likewise.
(creal_test): Likewise.
(csin_test): Likewise.
(csinh_test): Likewise.
(csqrt_test): Likewise.
(ctan_test): Likewise.
(ctan_test_tonearest): Likewise.
(ctan_test_towardzero): Likewise.
(ctan_test_downward): Likewise.
(ctan_test_upward): Likewise.
(ctanh_test): Likewise.
(ctanh_test_tonearest): Likewise.
(ctanh_test_towardzero): Likewise.
(ctanh_test_downward): Likewise.
(ctanh_test_upward): Likewise.
(erf_test): Likewise.
(erfc_test): Likewise.
(exp_test): Likewise.
(exp_test_tonearest): Likewise.
(exp_test_towardzero): Likewise.
(exp_test_downward): Likewise.
(exp_test_upward): Likewise.
(exp10_test): Likewise.
(exp10_test_tonearest): Likewise.
(exp10_test_towardzero): Likewise.
(exp10_test_downward): Likewise.
(exp10_test_upward): Likewise.
(pow10_test): Likewise.
(exp2_test): Likewise.
(expm1_test): Likewise.
(expm1_test_tonearest): Likewise.
(expm1_test_towardzero): Likewise.
(expm1_test_downward): Likewise.
(expm1_test_upward): Likewise.
(fabs_test): Likewise.
(fdim_test): Likewise.
(floor_test): Likewise.
(fma_test): Likewise.
(fma_test_towardzero): Likewise.
(fma_test_downward): Likewise.
(fma_test_upward): Likewise.
(fmax_test): Likewise.
(fmin_test): Likewise.
(fmod_test): Likewise.
(fpclassify_test): Likewise.
(frexp_test): Likewise.
(hypot_test): Likewise.
(ilogb_test): Likewise.
(isfinite_test): Likewise.
(finite_test): Likewise.
(isgreater_test): Likewise.
(isgreaterequal_test): Likewise.
(isinf_test): Likewise.
(isless_test): Likewise.
(islessequal_test): Likewise.
(islessgreater_test): Likewise.
(isnan_test): Likewise.
(isnormal_test): Likewise.
(issignaling_test): Likewise.
(isunordered_test): Likewise.
(j0_test): Likewise.
(j1_test): Likewise.
(jn_test): Likewise.
(ldexp_test): Likewise.
(lgamma_test): Likewise.
(gamma_test): Likewise.
(lrint_test): Likewise.
(lrint_test_tonearest): Likewise.
(lrint_test_towardzero): Likewise.
(lrint_test_downward): Likewise.
(lrint_test_upward): Likewise.
(llrint_test): Likewise.
(llrint_test_tonearest): Likewise.
(llrint_test_towardzero): Likewise.
(llrint_test_downward): Likewise.
(llrint_test_upward): Likewise.
(log_test): Likewise.
(log10_test): Likewise.
(log1p_test): Likewise.
(log2_test): Likewise.
(logb_test): Likewise.
(logb_test_downward): Likewise.
(lround_test): Likewise.
(llround_test): Likewise.
(modf_test): Likewise.
(nearbyint_test): Likewise.
(nextafter_test): Likewise.
(nexttoward_test): Likewise.
(pow_test): Likewise.
(pow_test_tonearest): Likewise.
(pow_test_towardzero): Likewise.
(pow_test_downward): Likewise.
(pow_test_upward): Likewise.
(remainder_test): Likewise.
(drem_test): Likewise.
(remainder_test_tonearest): Likewise.
(drem_test_tonearest): Likewise.
(remainder_test_towardzero): Likewise.
(drem_test_towardzero): Likewise.
(remainder_test_downward): Likewise.
(drem_test_downward): Likewise.
(remainder_test_upward): Likewise.
(drem_test_upward): Likewise.
(remquo_test): Likewise.
(rint_test): Likewise.
(rint_test_tonearest): Likewise.
(rint_test_towardzero): Likewise.
(rint_test_downward): Likewise.
(rint_test_upward): Likewise.
(round_test): Likewise.
(scalb_test): Likewise.
(scalbn_test): Likewise.
(scalbln_test): Likewise.
(signbit_test): Likewise.
(sin_test): Likewise.
(sin_test_tonearest): Likewise.
(sin_test_towardzero): Likewise.
(sin_test_downward): Likewise.
(sin_test_upward): Likewise.
(sincos_test): Likewise.
(sinh_test): Likewise.
(sinh_test_tonearest): Likewise.
(sinh_test_towardzero): Likewise.
(sinh_test_downward): Likewise.
(sinh_test_upward): Likewise.
(sqrt_test): Likewise.
(sqrt_test_tonearest): Likewise.
(sqrt_test_towardzero): Likewise.
(sqrt_test_downward): Likewise.
(sqrt_test_upward): Likewise.
(tan_test): Likewise.
(tan_test_tonearest): Likewise.
(tan_test_towardzero): Likewise.
(tan_test_downward): Likewise.
(tan_test_upward): Likewise.
(tanh_test): Likewise.
(tgamma_test): Likewise.
(trunc_test): Likewise.
(y0_test): Likewise.
(y1_test): Likewise.
(yn_test): Likewise.
(significand_test): Likewise.
Joseph Myers [Wed, 5 Mar 2014 15:02:38 +0000 (15:02 +0000)]
Don't include individual test ulps in libm-test-ulps.
As recently discussed
<https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it
doesn't seem particularly useful for libm-test-ulps files to contain
huge amounts of data on ulps for individual tests; just the global
maximum observed ulps for each function, together with the
verification of exceptions, errno and special results such as
infinities and NaNs for each test, suffices to verify that a
function's behavior on the given test inputs is within the expected
accuracy. Removing this data reduces source tree churn caused by
updates to these files when libm tests are added, and reduces the
frequency with which testsuite additions actually need libm-test-ulps
changes at all.
Accordingly, this patch removes that data, so that individual tests
get checked against the global bounds for the given function and only
generate an error if those are exceeded. Tested x86_64 (including
verifying that if an ulps value is artificially reduced, the tests do
indeed fail as they should and "make regen-ulps" generates the
expected changes).
* math/libm-test.inc (struct ulp_data): Don't refer to ulps for
individual tests in comment.
(libm-test-ulps.h): Don't refer to test_ulps in #include comment.
(prev_max_error): New variable.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(compare_ulp_data): Don't refer to test names in comment.
(find_test_ulps): Remove function.
(find_function_ulps): Likewise.
(find_complex_function_ulps): Likewise.
(init_max_error): Take function name as argument. Look up ulps
for that function.
(print_ulps): Remove function.
(print_max_error): Use prev_max_error instead of calling
find_function_ulps.
(print_complex_max_error): Use prev_real_max_error and
prev_imag_max_error instead of calling find_complex_function_ulps.
(check_float_internal): Take max_ulp parameter instead of calling
find_test_ulps. Don't call print_ulps.
(check_float): Update call to check_float_internal.
(check_complex): Update calls to check_float_internal.
(START): Pass argument to init_max_error.
* math/gen-libm-test.pl (%results): Don't include "kind"
information.
(parse_ulps): Don't handle ulps of individual tests.
(print_ulps_file): Likewise.
(output_ulps): Likewise.
* math/README.libm-test: Update.
* manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of
individual tests.
* sysdeps/aarch64/libm-test-ulps: Remove individual test ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
Carlos O'Donell [Wed, 5 Mar 2014 05:00:25 +0000 (00:00 -0500)]
hppa: Remove fma ulps from libm-test-ulps.
The expected fma ulp of 1 has been removed.
The fma function should have 0 ulps.
Bug #16661 has been filed to track this issue.
Carlos O'Donell [Tue, 4 Mar 2014 23:47:35 +0000 (18:47 -0500)]
hppa: Regenerate ULPs again.
Carlos O'Donell [Tue, 4 Mar 2014 19:43:58 +0000 (14:43 -0500)]
hppa: Regenerate ULPs.
Joseph Myers [Tue, 4 Mar 2014 14:16:25 +0000 (14:16 +0000)]
Fix libm-test.inc:print_complex_max_error handling of some error cases.
When regenerating ulps incrementally with "make regen-ulps", the
resulting diffs should only increase existing ulps, never decrease
them. This allows successive uses of "make regen-ulps" on different
hardware or with different compiler configurations to accumulate ulps
that are sufficient for tests to pass in a variety of configurations.
However, sometimes changes that decrease ulps are wrongly generated;
thus, when applying
<https://sourceware.org/ml/libc-alpha/2014-02/msg00605.html> I had to
remove such changes manually. The problem is
print_complex_max_error. If the ulps for either the real or the
imaginary part of a function are out of range, this function prints
the maximum ulps seen for both parts, which then replace those
previously in libm-test-ulps. So if the ulps for one part are bigger
than recorded before, but those for the other part are smaller, the
diffs reduce existing ulps.
This patch fixes the logic so that only increased ulps get printed.
Tested x86_64 ("make math/tests", and "make regen-ulps" in a situation
with ulps manually modified so one part would go up and the other
down, to confirm the changes have the intended effect then).
* math/libm-test.inc (print_complex_max_error): Check separately
whether real and imaginary errors are within allowed range and
pass 0 to print_complex_function_ulps instead of value within
allowed range.
Siddhesh Poyarekar [Tue, 4 Mar 2014 10:19:58 +0000 (15:49 +0530)]
Fix up formatting in tst-ftell-active-handler.c
Siddhesh Poyarekar [Tue, 4 Mar 2014 06:57:34 +0000 (12:27 +0530)]
Fix up formatting
Siddhesh Poyarekar [Tue, 4 Mar 2014 06:53:27 +0000 (12:23 +0530)]
Use cached offset in ftell when reliable
The cached offset is reliable to use in ftell when the stream handle
is active. We can consider a stream as being active when there is
unflushed data. However, even in this case, we can use the cached
offset only when the stream is not being written to in a+ mode,
because this case may have unflushed data and a stale offset; the
previous read could have sent it off somewhere other than the end of
the file.
There were a couple of adjustments necessary to get this to work.
Firstly, fdopen now ceases to use _IO_attach_fd because it sets the
offset cache to the current file position. This is not correct
because there could be changes to the file descriptor before the
stream handle is activated, which would not get reflected.
A similar offset caching action is done in _IO_fwide, claiming that
wide streams have 'problems' with the file offsets. There don't seem
to be any obvious problems with not having the offset cache available,
other than that it will have to be queried in a subsequent
read/write/seek. I have removed this as well.
The testsuite passes successfully with these changes on x86_64.
Siddhesh Poyarekar [Tue, 4 Mar 2014 02:15:58 +0000 (07:45 +0530)]
Separate ftell from fseek logic and avoid modifying FILE data (#16532)
ftell semantics are distinct from fseek(SEEK_CUR) especially when it
is called on a file handler that is not yet active. Due to this
caveat, much care needs to be taken while modifying the handler data
and hence, this first iteration on separating out ftell focusses on
maintaining handler data integrity at all times while it figures out
the current stream offset. The result is that it makes a syscall for
every offset request.
There is scope for optimizing this by caching offsets when we know
that the handler is active. A simple way to find out is when the
buffers have data. It is not so simple to find this out when the
buffer is empty without adding some kind of flag.
Roland McGrath [Mon, 3 Mar 2014 23:30:42 +0000 (15:30 -0800)]
Retire the separate ChangeLog files in nptl/ and nptl_db/ subdirs.
Siddhesh Poyarekar [Mon, 3 Mar 2014 17:21:39 +0000 (22:51 +0530)]
nscd: Improved support for tracking startup failure in nscd service (BZ #16639)
Currently, the nscd parent process parses commandline options and
configuration, forks on startup and immediately exits with a success.
If the child process encounters some error after this, it goes
undetected and any services started up after it may have to repeatedly
check to make sure that the nscd service did actually start up and is
serving requests.
To make this process more reliable, I have added a pipe between the
parent and child process, through which the child process sends a
notification to the parent informing it of its status. The parent
waits for this status and once it receives it, exits with the
corresponding exit code. So if the child service sends a success
status (0), the parent exits with a success status. Similarly for
error conditions, the child sends the non-zero status code, which the
parent passes on as the exit code.
This, along with setting the nscd service type to forking in its
systemd configuration file, allows systemd to be certain that the nscd
service is ready and is accepting connections.
Carlos O'Donell [Mon, 3 Mar 2014 17:28:25 +0000 (12:28 -0500)]
Revert
4248f0da6ff9e7dd63464cdecec2dec332dfc2f0.
Objections were raised surrounding the calloc simplification
and it is better to revert the patch, continue discussions
and then submit a new patch for inclusion with all issues
fully addressed.
Adhemerval Zanella [Mon, 3 Mar 2014 14:58:08 +0000 (08:58 -0600)]
PowerPC: Update powerpc-fpu ULPs.
Rajalakshmi Srinivasaraghavan [Mon, 3 Mar 2014 14:06:41 +0000 (08:06 -0600)]
PowerPC: strrchr optimization for POWER7/PPC64
This patch optimizes strrchr() for ppc64. It uses aligned memory
access along with cmpb instruction and CPU prefetch to avoid
cache misses for speed improvement.
Ondřej Bílka [Sat, 1 Mar 2014 01:06:18 +0000 (02:06 +0100)]
Add changelog.
Carlos O'Donell [Fri, 28 Feb 2014 23:30:22 +0000 (18:30 -0500)]
Add header and standard information to threads.texi.
The glibc manual uses special annotations to include functions
in the summary chapter. These annotations were missing from the
functions in the threads chapter. This patch adds those special
markers and in turn adds these functions to the summary chapter.
Carlos O'Donell [Fri, 28 Feb 2014 23:11:06 +0000 (18:11 -0500)]
Promote do_lookup_x:check_match to a full function.
While it may be argued that nested functions make the resulting
code easier to read, or worse to read the following two bugs
make it difficult to debug:
Bug 8300 - no local symbol information within nested or nesting
procedures
https://sourceware.org/bugzilla/show_bug.cgi?id=8300
Bug 53927 - wrong value for DW_AT_static_link
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=53927
Until these are fixed I've made check_match a full function.
After they are fixed we can resume arguing about the merits
of nested functions on readability and maintenance.
Ondřej Bílka [Fri, 28 Feb 2014 21:45:33 +0000 (22:45 +0100)]
Make strtok benchmark competive.
We include a generic version of strtok to result which could be faster
when underlying primitives are better optimized than current version.
Roland McGrath [Fri, 28 Feb 2014 21:00:27 +0000 (13:00 -0800)]
Fix fallout from Joseph's untested Makeconfig change.
Roland McGrath [Fri, 28 Feb 2014 19:07:43 +0000 (11:07 -0800)]
Add missing } in Versions file.
Siddhesh Poyarekar [Fri, 28 Feb 2014 12:25:05 +0000 (17:55 +0530)]
Fix missing ChangeLog
I had forgotten to add a changelog entry for a patch. Added it now in
the right place.
Adhemerval Zanella [Mon, 17 Feb 2014 16:44:08 +0000 (10:44 -0600)]
PowerPC: llround/llroundf POWER8 optimization
This patch add a optimized llround/llroundf implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
Adhemerval Zanella [Tue, 18 Feb 2014 14:29:29 +0000 (09:29 -0500)]
PowerPC: llrint/llrintf POWER8 optimization
This patch add a optimized llrint/llrintf implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
Adhemerval Zanella [Thu, 27 Feb 2014 15:46:46 +0000 (09:46 -0600)]
PowerPC: Optimized finite/finitef for POWER8
This patch add a optimized finite/finitef implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
Adhemerval Zanella [Thu, 27 Feb 2014 15:45:41 +0000 (09:45 -0600)]
PowerPC: Optimized isinf/isinff for POWER8
This patch add a optimized isinf/isinff implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
Adhemerval Zanella [Thu, 27 Feb 2014 15:43:51 +0000 (09:43 -0600)]
PowerPC: Optimized isnan/isnanf for POWER8
This patch add a optimized isnan/isnanf implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
Joey Ye [Thu, 27 Feb 2014 17:44:43 +0000 (17:44 +0000)]
Fix ARM NAN fraction bits.
Current ARM soft-float implementation is violating the RTABI
(http://infocenter.arm.com/help/topic/com.arm.doc.ihi0043d/IHI0043D_rtabi.pdf)
Section 4.1.1.1:
When not otherwise specified by IEEE 754, the result on an invalid
operation should be the quiet NaN bit pattern with only the most
significant bit of the significand set, and all other significand bits
zero.
This patch fixes it by setting _FP_NANFRAC_* to zero.
Ran make check test with -mfloat-abi=soft. No regression.
* sysdeps/arm/soft-fp/sfp-machine.h (_FP_NANFRAC_S, _FP_NANFRAC_D)
(_FP_NANFRAC_Q): Set to zero.
Siddhesh Poyarekar [Thu, 27 Feb 2014 16:04:20 +0000 (21:34 +0530)]
Fix ChangeLog formatting
Siddhesh Poyarekar [Thu, 27 Feb 2014 15:42:09 +0000 (21:12 +0530)]
Fix sign of input to bsloww1 (BZ #16623)
In
84ba214c, I removed some redundant sign computations and in the
process, I incorrectly got rid of a temporary variable, thus passing
the absolute value of the input to bsloww1. This caused #16623.
This fix undoes the incorrect change.
Joseph Myers [Thu, 27 Feb 2014 03:25:27 +0000 (03:25 +0000)]
Support expected failures in .test-result files.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00195.html>, makes it
possible for .test-result files for individual tests to contain XPASS
and XFAIL rather than PASS and FAIL in cases where failure is
expected. This replaces the marking of two individual tests with "-"
to cause them to be expected at makefile level to fail;
evaluate-test.sh will ensure it exits with status 0 for an expected
failure.
Tested x86_64.
* scripts/evaluate-test.sh: Take new argument indicating whether
failure is expected.
* Makeconfig (evaluate-test): Pass argument to evaluate-test.sh
indicating whether failure is expected.
* conform/Makefile (test-xfail-run-conformtest): New variable.
($(objpfx)run-conformtest.out): Don't expect to fail at makefile
level.
* posix/Makefile (test-xfail-annexc): New variable.
($(objpfx)annexc.out): Don't expect to fail at makefile level.
Joseph Myers [Wed, 26 Feb 2014 23:12:03 +0000 (23:12 +0000)]
Consistently include Makeconfig after defining subdir.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
Ondřej Bílka [Wed, 26 Feb 2014 22:27:38 +0000 (23:27 +0100)]
Fix two spaces after sentence.
Minor formatting fix that was carried by issuing
sed -e"s/\. \([A-Z]\)/. \1/" followed by editing result.
Steve Ellcey [Wed, 26 Feb 2014 22:19:20 +0000 (14:19 -0800)]
Add macros and inline functions to mips math_private.h file.
This is a patch to the MIPS math_private.h file to define HAVE_RM_CTX and
implement the ctx macros. I also defined a few other macros and inline
functions that I skipped the first time.
Carlos O'Donell [Wed, 26 Feb 2014 18:39:02 +0000 (13:39 -0500)]
Use @Theglibc{} in manual/ipc.texi.
Carlos O'Donell [Wed, 26 Feb 2014 16:03:24 +0000 (11:03 -0500)]
Add a new "Inter-Process Communication" chapter.
This patch adds a new "Inter-Process Communication"
chapter to cover the sem*, msg*, and shm* functions.
Initially we document only the sem* function signatures
and their safety notes.
Adhemerval Zanella [Wed, 26 Feb 2014 12:54:34 +0000 (06:54 -0600)]
PowerPC: Update powerpc-fpu ULPs.
Ondřej Bílka [Wed, 26 Feb 2014 12:13:09 +0000 (13:13 +0100)]
Simplify calloc implementation.
To make future improvements of allocator simpler we could for now calloc
just call malloc and memset. With that we could omit a changes that
would duplicate malloc changes anyway.
Carlos O'Donell [Tue, 25 Feb 2014 18:23:25 +0000 (13:23 -0500)]
BZ #16632: Change [_BSD/_SVID]_SOURCE warning.
Source packages that need to support both 2.19 and
2.20 will need to decide to use _BSD_SOURCE and
_SVID_SOURCE vs. _DEFAULT_SOURCE.
The difficulty in making that decision is that
__GLIBC_MINOR__ is itself defined in features.h,
but you want to set the feature test macros before
including features.h.
Therefore to ease the transition we should disable
the warning if _DEFAULT_SOURCE is also defined.
https://sourceware.org/ml/libc-alpha/2014-02/msg00666.html
https://sourceware.org/glibc/wiki/Release/2.20#Packaging_Changes
Carlos O'Donell [Tue, 25 Feb 2014 18:00:36 +0000 (13:00 -0500)]
BZ #16613: Support TLS in audit libraries.
This commit fixes a bug where the dynamic loader would crash
when loading audit libraries, via LD_AUDIT, where those libraries
used TLS. The dynamic loader was not considering that the audit
libraries would use TLS and failed to bump the TLS generation
counter leaving TLS usage inconsistent after loading the audit
libraries.
https://sourceware.org/ml/libc-alpha/2014-02/msg00569.html
Florian Weimer [Tue, 25 Feb 2014 13:56:10 +0000 (14:56 +0100)]
misc/sys/select.h (__FD_MASK): Avoid signed integer overflow.
Shifting into the sign position is currently supported as a GCC
extension, but explicitly subjected to future changes. Computation
in the unsigned type followed by a cast to the signed type is a GCC
extension that will be available forever.
Will Newton [Mon, 27 Jan 2014 09:01:03 +0000 (09:01 +0000)]
ARM: Add SystemTap probes to longjmp and setjmp.
Now the ARM port implements pointer encryption for jmpbufs, gdb needs
a SystemTap probe point in longjmp to determine the target PC of
a call to longjmp. This patch implements the probe point in longjmp
and a similar probe point in setjmp.
In order to have all the appropriate registers available to pass to the
probe this reorders the layout of jmpbuf, putting the sp and lr registers
at the start rather than the end, allowing them to be read and
written sequentially.
Tested on armv7, no new failures in the glibc testsuite and confirmed
that this fixes the gdb.base/longjmp.exp failures in the gdb testsuite.
ChangeLog:
2014-02-25 Will Newton <will.newton@linaro.org>
* sysdeps/arm/__longjmp.S: Include stap-probe.h.
(__longjmp): Restore sp and lr before restoring callee
saved registers. Add longjmp and longjmp_target
SystemTap probe point.
* sysdeps/arm/bits/setjmp.h (__jmp_buf): Update comment.
* sysdeps/arm/include/bits/setjmp.h (__JMP_BUF_SP):
Define to zero to match jmpbuf layout.
* sysdeps/arm/setjmp.S: Include stap-probe.h.
(__sigsetjmp): Save sp and lr before saving callee
saved registers. Add setjmp SystemTap probe point.
Stefan Liebler [Tue, 25 Feb 2014 08:36:18 +0000 (09:36 +0100)]
S/390: Regenerate ULPs.
Andreas Schwab [Tue, 30 Jul 2013 09:58:45 +0000 (11:58 +0200)]
Fix race conditions in pldd that may leave the process stopped after detaching
Fixes bug 15804
Roland McGrath [Sat, 22 Feb 2014 09:19:45 +0000 (01:19 -0800)]
Remove obsolete SHLIB_COMPAT conditionalization in Versions files.
Roland McGrath [Sat, 22 Feb 2014 08:58:54 +0000 (00:58 -0800)]
Remove unused %include lines from Versions files.
Joseph Myers [Fri, 21 Feb 2014 21:48:08 +0000 (21:48 +0000)]
Generate .test-result files for tests with special rules.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now
proposed for inclusion in glibc, extends the generation of PASS and
FAIL status in .test-result files for individual tests to cover tests
with their own custom makefile rules. This is just adding
$(evaluate-test) calls to all such rules, since tests with multiple
commands were previously split into separate tests.
Note that the tests the makefiles expect to fail (posix/annexc and
conformtest) currently get FAIL listed in the .test-result file,
rather than XFAIL; a subsequent patch will introduce a better XFAIL
mechanism.
Tested x86_64.
* Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test).
($(objpfx)check-local-headers.out): Likewise.
($(objpfx)begin-end-check.out): Likewise.
* Makerules (check-abi-%.out): Likewise.
* catgets/Makefile ($(objpfx)test1.cat): Likewise.
($(objpfx)test2.cat): Likewise.
($(objpfx)de/libc.cat): Likewise.
($(objpfx)test-gencat.out): Likewise.
* conform/Makefile ($(objpfx)run-conformtest.out): Likewise.
* elf/Makefile ($(objpfx)order-cmp.out): Likewise.
($(objpfx)noload-mem): Likewise.
($(objpfx)tst-pathopt.out): Likewise.
($(objpfx)tst-rtld-load-self.out): Likewise.
($(objpfx)tst-array1-cmp.out): Likewise.
($(objpfx)tst-array1-static-cmp.out): Likewise.
($(objpfx)tst-array2-cmp.out): Likewise.
($(objpfx)tst-array3-cmp.out): Likewise.
($(objpfx)tst-array4-cmp.out): Likewise.
($(objpfx)tst-array5-cmp.out): Likewise.
($(objpfx)tst-array5-static-cmp.out): Likewise.
($(objpfx)check-textrel.out): Likewise.
($(objpfx)check-execstack.out): Likewise.
($(objpfx)check-localplt.out): Likewise.
($(objpfx)order2-cmp.out): Likewise.
($(objpfx)tst-leaks1-mem): Likewise.
($(objpfx)tst-leaks1-static-mem): Likewise.
($(objpfx)tst-initorder-cmp.out): Likewise.
($(objpfx)tst-initorder2-cmp.out): Likewise.
($(objpfx)tst-unused-dep.out): Likewise.
($(objpfx)tst-unused-dep-cmp.out): Likewise.
* grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise.
* iconv/Makefile (test-iconvconfig): Likewise.
* iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise.
($(objpfx)iconv-test.out): Likewise.
($(objpfx)tst-tables.out): Likewise.
* intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise.
($(objpfx)tst-gettext.out): Likewise.
($(objpfx)tst-translit.out): Likewise.
($(objpfx)tst-gettext2.out): Likewise.
($(objpfx)tst-gettext4.out): Likewise.
($(objpfx)tst-gettext6.out): Likewise.
* io/Makefile ($(objpfx)ftwtest.out): Likewise.
* libio/Makefile ($(objpfx)test-freopen.out): Likewise.
($(objpfx)tst-fopenloc-cmp.out): Likewise.
($(objpfx)tst-fopenloc-mem.out): Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise.
* misc/Makefile ($(objpfx)tst-error1-mem): Likewise.
* posix/Makefile ($(objpfx)globtest.out): Likewise.
($(objpfx)wordexp-tst.out): Likewise.
($(objpfx)annexc.out): Likewise.
($(objpfx)tst-fnmatch-mem): Likewise.
($(objpfx)bug-regex2-mem): Likewise.
($(objpfx)bug-regex14-mem): Likewise.
($(objpfx)bug-regex21-mem): Likewise.
($(objpfx)bug-regex31-mem): Likewise.
($(objpfx)tst-vfork3-mem): Likewise.
($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
($(objpfx)tst-pcre-mem): Likewise.
($(objpfx)tst-boost-mem): Likewise.
($(objpfx)tst-getconf.out): Likewise.
($(objpfx)bug-ga2-mem): Likewise.
($(objpfx)bug-glob2-mem): Likewise.
* resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise.
($(objpfx)mtrace-tst-leaks2): Likewise.
* stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise.
($(objpfx)tst-printf.out): Likewise.
($(objpfx)tst-setvbuf1.out): Likewise.
($(objpfx)tst-setvbuf1-cmp.out): Likewise.
* stdlib/Makefile ($(objpfx)isomac.out): Likewise.
($(objpfx)tst-fmtmsg.out): Likewise.
* string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise.
* sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise.
localedata:
* Makefile ($(objpfx)sort-test.out): Use $(evaluate-test).
($(objpfx)tst-fmon.out): Likewise.
($(objpfx)tst-numeric.out): Likewise.
($(objpfx)tst-locale.out): Likewise.
($(objpfx)tst-rpmatch.out): Likewise.
($(objpfx)tst-trans.out): Likewise.
($(objpfx)tst-mbswcs.out): Likewise.
($(objpfx)tst-ctype.out): Likewise.
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
nptl:
* Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test).
($(objpfx)tst-tls6.out): Likewise.
($(objpfx)tst-cleanup0.out): Likewise.
($(objpfx)tst-cleanup0-cmp.out): Likewise.
($(objpfx)tst-cancel-wrappers.out): Likewise.
($(objpfx)tst-oddstacklimit.out): Likewise.
nptl_db:
* Makefile ($(objpfx)db-symbols.out): Use
$(evaluate-test).
Joseph Myers [Fri, 21 Feb 2014 21:45:26 +0000 (21:45 +0000)]
Complete _BSD_SOURCE / _SVID_source followup cleanup.
This patch completes the headers cleanup consequent on removal of
_BSD_SOURCE and _SVID_SOURCE (apart from any subsequent deprecations):
* #endif conditionals that referred to BSD or SVID are updated.
* Redundant __USE_* tests in cases involving __USE_MISC are removed.
This includes cases such as __USE_MISC || __USE_ISOC99, where
__USE_MISC is redundant (because __USE_MISC is only ever defined in
the default / _DEFAULT_SOURCE / _GNU_SOURCE case, when __USE_ISOC99
is also defined; the same applies to the non-XSI-extended POSIX
versions), and cases involving __USE_GNU, where __USE_GNU is
redundant (because if __USE_GNU is defined, so are the other __USE_*
macros). There may well be other cases of __USE_FOO || __USE_BAR
tests that could be simplified because one macro implies the other;
this patch only addresses cases involving __USE_MISC.
Tested x86_64.
* bits/fcntl.h [__USE_MISC]: Remove redundant conditionals.
* bits/sigaction.h [__USE_MISC]: Likewise.
* bits/waitstatus.h: Update #endif comments.
* ctype/ctype.h: Likewise.
* dirent/dirent.h: Likewise.
[__USE_MISC]: Remove redundant conditionals.
* grp/grp.h: Update #endif comments.
[__USE_GNU]: Remove redundant conditionals.
[__USE_MISC]: Likewise.
* inet/netinet/in.h [__USE_GNU]: Likewise.
* io/sys/stat.h [__USE_MISC]: Likewise.
* libio/bits/stdio-ldbl.h [__USE_MISC]: Likewise.
* libio/bits/stdio.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* libio/bits/stdio2.h [__USE_MISC]: Likewise.
* libio/stdio.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* math/bits/math-finite.h [__USE_MISC]: Likewise.
* math/bits/mathcalls.h [__USE_MISC]: Likewise.
* math/math.h: Update #else and #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* misc/sys/uio.h: Update #endif comments.
* posix/bits/unistd.h [__USE_MISC]: Remove redundant conditionals.
* posix/glob.h [__USE_MISC]: Likewise.
* posix/sys/types.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* posix/sys/wait.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* posix/unistd.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* pwd/pwd.h [__USE_GNU]: Likewise.
[__USE_MISC]: Likewise.
* resolv/netdb.h [__USE_GNU]: Likewise.
* signal/signal.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* stdlib/stdlib.h: Update #else and #endif comments.
[__USE_MISC]: Remove redundant conditionals.
[__USE_GNU]: Likewise.
* string/bits/string2.h [__USE_MISC]: Likewise.
* string/string.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h [__USE_MISC]:
Likewise.
* sysdeps/mach/hurd/bits/fcntl.h [__USE_MISC]: Likewise.
* sysdeps/mach/hurd/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/stat.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/bits/fcntl-linux.h: Update #endif
comments.
[__USE_MISC]: Remove redundant conditionals.
* sysdeps/unix/sysv/linux/bits/in.h [__USE_GNU]: Likewise.
* sysdeps/unix/sysv/linux/bits/sigaction.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/bits/socket.h [__USE_GNU]: Likewise.
* sysdeps/unix/sysv/linux/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/m68k/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/mips/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/stat.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/s390/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/s390/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/stat.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/x86/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/x86/bits/string.h: Update #endif comments.
* sysdeps/x86/fpu/bits/mathinline.h [__USE_MISC]: Remove redundant
conditionals.
* time/sys/time.h: Update #endif comments.
* time/time.h: Likewise.
[__USE_MISC]: Remove redundant conditionals.
Yury Gribov [Fri, 21 Feb 2014 17:21:13 +0000 (17:21 +0000)]
Update ARM ulps for VFPv4 (bug 16600).
[BZ #16600]
* sysdeps/arm/libm-test-ulps: Update for VFPv4.
Andreas Schwab [Fri, 21 Feb 2014 10:32:19 +0000 (11:32 +0100)]
Add GLIBC_2.17 to librt in Version.def
This is needed because the version is used in SHLIB_COMPAT.
Adam Conrad [Fri, 21 Feb 2014 07:24:03 +0000 (00:24 -0700)]
Allow sys/auxv.h to be used from the testsuite on powerpc and sparc.
elf/tst-auxv.c includes misc/sys/auxv.h, which ends up not actually
being included due to the guard overlap, and getauxval becomes an
implicit declaration and implicit pointer conversion which means, at
best, the test isn't actually testing what it thinks it is and, at
worst, it'll crash and burn on platforms where implict pointer
conversion is a Very Bad Thing.
* sysdeps/powerpc/bits/hwcap.h: Allow _SYSDEPS_SYSDEP_H guard as a
synonym for _SYS_AUXV_H to allow direct inclusion.
* sysdeps/sparc/bits/hwcap.h: Likewise.
* sysdeps/powerpc/sysdep.h: Define _SYSDEPS_SYSDEP_H instead of
_SYS_AUXV_H so we can include sysdep.h and sys/auxv.h together.
* sysdeps/sparc/sysdep.h: Likewise.
Siddhesh Poyarekar [Fri, 21 Feb 2014 06:01:41 +0000 (11:31 +0530)]
Minor formatting fix
Rajalakshmi Srinivasaraghavan [Fri, 21 Feb 2014 05:47:41 +0000 (11:17 +0530)]
print length in strrchr benchtest
The return criteria of strrchr() is to read till NULL even if the
search character is hit. So its better to print len instead of pos.
Joseph Myers [Thu, 20 Feb 2014 17:55:35 +0000 (17:55 +0000)]
Fix __ASSUME_SENDMMSG issues (bug 16611).
Similar to the issues for accept4 and recvmmsg, __ASSUME_SENDMMSG is
also confused about whether it relates to function availability or
socketcall operation availability, and the conditions for the
definition are always wrong (sendmmsg appeared in Linux kernel 3.0,
not 2.6.39); this is now bug 16611.
This patch splits the macro into separate macros like those for
accept4 and recvmmsg, defining them for appropriate kernel versions.
Tested x86_64, including that disassembly of the installed shared
libraries is unchanged by this patch.
[BZ #16611]
* sysdeps/unix/sysv/linux/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030000 && __ASSUME_SOCKETCALL]
(__ASSUME_SENDMMSG_SOCKETCALL): Define.
[__LINUX_KERNEL_VERSION >= 0x030000 && (__i386__ || __x86_64__ ||
__powerpc__ || __sh__ || __sparc__)] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
[__i386__ || __powerpc__ || __sh__ || __sparc__]
(__ASSUME_SENDMMSG_SYSCALL_WITH_SOCKETCALL): Likewise.
[__ASSUME_SENDMMSG_SOCKETCALL || __ASSUME_SENDMMSG_SYSCALL]
(__ASSUME_SENDMMSG): Define instead of using previous
[__LINUX_KERNEL_VERSION >= 0x020627] condition.
* sysdeps/unix/sysv/linux/aarch64/kernel-features.h
(__ASSUME_SENDMMSG_SYSCALL): Define.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030200] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/ia64/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/internal_sendmmsg.S [__ASSUME_SOCKETCALL
&& !__ASSUME_SENDMMSG_SYSCALL_WITH_SOCKETCALL &&
!__ASSUME_SENDMMSG_SYSCALL] (__NR_sendmmsg): Undefine.
[__ASSUME_SENDMMSG]: Change conditionals to
[__ASSUME_SENDMMSG_SOCKETCALL].
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030300] (__ASSUME_SENDMMSG_SYSCALL):
Define.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030100] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/sendmmsg.c [__ASSUME_SOCKETCALL &&
!__ASSUME_SENDMMSG_SYSCALL_WITH_SOCKETCALL &&
!__ASSUME_SENDMMSG_SYSCALL] (__NR_sendmmsg): Undefine.
[!__ASSUME_SENDMMSG]: Change conditional to
[!__ASSUME_SENDMMSG_SOCKETCALL].
* sysdeps/unix/sysv/linux/tile/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL):
Define.
* sysdeps/unix/sysv/linux/hppa/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030100] (__ASSUME_SENDMMSG_SYSCALL):
Define.
Joseph Myers [Thu, 20 Feb 2014 17:53:08 +0000 (17:53 +0000)]
Fix __ASSUME_RECVMMSG issues (bug 16610).
Similar to the issues for accept4, __ASSUME_RECVMMSG is also confused
about whether it relates to function availability or socketcall
operation availability; this is now bug 16610.
Nothing actually tests __ASSUME_RECVMMSG for function availability,
but implicit in the definition in kernel-features.h is the idea that
it makes sense when the syscall is available and socketcall is not
being used. As with accept4, there are architectures where the
syscall was added later than the socketcall operation, meaning that
assuming glibc is built with recent enough kernel headers, it does not
attempt to use socketcall for these operations and __ASSUME_RECVMMSG
gets defined for kernels >= 2.6.33 even when the syscall was only
added later.
This patch splits the macro into separate macros like those used for
accept4; having similar macro structure in both cases (and for
sendmmsg once I've dealt with that) seems likely to be less confusing
than having a different structure on the basis of nothing actually
needing to assume the recvmmsg function works. Appropriate
definitions are added for all architectures.
Architecture-specific note: Tile's kernel-features.h says "TILE glibc
support starts with 2.6.36", which is accurate in that 2.6.36 was the
first kernel version with Tile support, and on that basis I've made
that header define __ASSUME_RECVMMSG_SYSCALL unconditionally.
However, Tile's configure.ac has arch_minimum_kernel=2.6.32. Since
arch_minimum_kernel is meant to reflect only kernel.org kernel
versions, I think that should change to 2.6.36. (If using glibc with
kernel versions from before a port went in kernel.org, it's your
responsibility to change arch_minimum_kernel in a local patch, and at
the same time to adjust any __ASSUME_* definitions that may not be
correct for your older kernel; for developing the official glibc it
should only ever be necessary to consider what official kernel.org
releases support.)
Tested x86_64, including that disassembly of the installed shared
libraries is unchanged by this patch.
[BZ #16610]
* sysdeps/unix/sysv/linux/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020621 && __ASSUME_SOCKETCALL]
(__ASSUME_RECVMMSG_SOCKETCALL): Define.
[(__LINUX_KERNEL_VERSION >= 0x020621 && (__i386__ || __x86_64__ ||
__sparc__)) || (__LINUX_KERNEL_VERSION >= 0x020625 && (__powerpc__
|| __sh__))] (__ASSUME_RECVMMSG_SYSCALL): Likewise.
[__i386__ || __sparc__]
(__ASSUME_RECVMMSG_SYSCALL_WITH_SOCKETCALL): Likewise.
[__ASSUME_RECVMMSG_SOCKETCALL || __ASSUME_RECVMMSG_SYSCALL]
(__ASSUME_RECVMMSG): Define instead of using previous
[__LINUX_KERNEL_VERSION >= 0x020621] condition.
* sysdeps/unix/sysv/linux/aarch64/kernel-features.h
(__ASSUME_RECVMMSG_SYSCALL): Define.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/ia64/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/internal_recvmmsg.S [__ASSUME_SOCKETCALL
&& !__ASSUME_RECVMMSG_SYSCALL_WITH_SOCKETCALL &&
!__ASSUME_RECVMMSG_SYSCALL] (__NR_recvmmsg): Undefine.
[__ASSUME_RECVMMSG]: Change condition to
[__ASSUME_RECVMMSG_SOCKETCALL].
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Define.
(__ASSUME_RECVMMSG_SYSCALL_WITH_SOCKETCALL): Likewise.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/recvmmsg.c [__ASSUME_SOCKETCALL &&
!__ASSUME_RECVMMSG_SYSCALL_WITH_SOCKETCALL &&
!__ASSUME_RECVMMSG_SYSCALL] (__NR_recvmmsg): Undefine.
[!__ASSUME_RECVMMSG]: Change condition to
[!__ASSUME_RECVMMSG_SOCKETCALL].
* sysdeps/unix/sysv/linux/tile/kernel-features.h
(__ASSUME_RECVMMSG_SYSCALL): Define.
* sysdeps/unix/sysv/linux/hppa/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020622] (__ASSUME_RECVMMSG_SYSCALL):
Define.
Joseph Myers [Thu, 20 Feb 2014 17:50:31 +0000 (17:50 +0000)]
Fix __ASSUME_ACCEPT4 issues (bug 16609).
In <https://sourceware.org/ml/libc-alpha/2013-12/msg00008.html>,
Aurelien noted issues with the definition of __ASSUME_ACCEPT4, which I
discussed in more detail in
<https://sourceware.org/ml/libc-alpha/2013-12/msg00014.html>; these
are now bug 16609.
As previously noted, __ASSUME_ACCEPT4 is used in two ways:
* In OS-independent code, to mean "accept4 can be assumed to work
rather than fail with ENOSYS". It doesn't matter whether it's
implemented with socketcall or a separate syscall.
* In Linux-specific code, to mean "the socketcall multiplex syscall
can be assumed to handle the accept4 operation. When used in
Linux-specific code, it *never* refers to anything relating to the
accept4 syscall, only to the socketcall multiplexer.
This patch splits the macro into separate __ASSUME_ACCEPT4_SOCKETCALL,
__ASSUME_ACCEPT4_SYSCALL and __ASSUME_ACCEPT4 to clarify the different
cases involved. A macro __ASSUME_SOCKETCALL is added for convenience
in writing logic relating to all socketcall architectures. In
addition, to address the issue of architectures where socketcall
support for accept4 was added before a separate syscall was added (and
so the separate syscall should not be used unless known to be present
or fallback to socketcall is available), a fourth macro
__ASSUME_ACCEPT4_SYSCALL_WITH_SOCKETCALL is added to indicate that the
syscall became available at the same time as socketcall support. This
is then used in the relevant places in a conditional determining
whether to undefine __NR_accept4 (the simple approach to avoiding the
syscall's presence causing problems; I didn't try to implement runtime
fallback from the syscall to socketcall).
Architecture-specific note: alpha defined __ASSUME_ACCEPT4 for 2.6.33
and later, but actually the syscall was added for alpha in 3.2, so
this patch uses the correct condition for __ASSUME_ACCEPT4_SYSCALL
there.
Tested x86_64, including that disassembly of the installed shared
libraries is unchanged by this patch.
[BZ #16609]
* sysdeps/unix/sysv/linux/kernel-features.h [__i386__ ||
__powerpc__ || __s390__ || __sh__ || __sparc__]
(__ASSUME_SOCKETCALL): Define.
[__LINUX_KERNEL_VERSION && __ASSUME_SOCKETCALL]
(__ASSUME_ACCEPT4_SOCKETCALL): Likewise.
[(__LINUX_KERNEL_VERSION >= 0x02061c && (__x86_64__ || __sparc__))
|| (__LINUX_KERNEL_VERSION >= 0x020625 && (__powerpc__ ||
__sh__))] (__ASSUME_ACCEPT4_SYSCALL): Likewise.
[__sparc__] (__ASSUME_ACCEPT4_SYSCALL_WITH_SOCKETCALL): Likewise.
[__ASSUME_ACCEPT4_SOCKETCALL || __ASSUME_ACCEPT4_SYSCALL]
(__ASSUME_ACCEPT4): Define instead of using previous
[__LINUX_KERNEL_VERSION >= 0x02061c && (__i386__ || __x86_64__ ||
__powerpc__ || __sparc__ || __s390__)] condition.
* sysdeps/unix/sysv/linux/aarch64/kernel-features.h
(__ASSUME_ACCEPT4): Change to __ASSUME_ACCEPT4_SYSCALL.
* sysdeps/unix/sysv/linux/accept4.c [__ASSUME_SOCKETCALL &&
!__ASSUME_ACCEPT4_SYSCALL_WITH_SOCKETCALL &&
!__ASSUME_ACCEPT4_SYSCALL] (__NR_accept4): Undefine.
[!__ASSUME_ACCEPT4]: Change condition to
[!__ASSUME_ACCEPT4_SOCKETCALL].
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
(__ASSUME_ACCEPT4): Change to __ASSUME_ACCEPT4_SYSCALL. Correct
condition to [__LINUX_KERNEL_VERSION >= 0x030200].
* sysdeps/unix/sysv/linux/arm/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020624] (__ASSUME_ACCEPT4): Change to
__ASSUME_ACCEPT4_SYSCALL.
* sysdeps/unix/sysv/linux/i386/accept4.S [__ASSUME_ACCEPT4]:
Change conditions to [__ASSUME_ACCEPT4_SOCKETCALL].
* sysdeps/unix/sysv/linux/ia64/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030300] (__ASSUME_ACCEPT4): Change to
__ASSUME_ACCEPT4_SYSCALL.
* sysdeps/unix/sysv/linux/internal_accept4.S [__ASSUME_SOCKETCALL
&& !__ASSUME_ACCEPT4_SYSCALL_WITH_SOCKETCALL &&
!__ASSUME_ACCEPT4_SYSCALL] (__NR_accept4): Undefine.
[__ASSUME_ACCEPT4]: Change condition to
[__ASSUME_ACCEPT4_SOCKETCALL].
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_SOCKETCALL): Define.
[__LINUX_KERNEL_VERSION >= 0x02061c] (__ASSUME_ACCEPT4): Remove.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_SOCKETCALL): Define.
(__ASSUME_ACCEPT4): Remove.
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_ACCEPT4_SYSCALL):
Define.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x02061f] (__ASSUME_ACCEPT4_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/tile/kernel-features.h
(__ASSUME_ACCEPT4): Change to __ASSUME_ACCEPT4_SYSCALL.
* sysdeps/unix/sysv/linux/hppa/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020622] (__ASSUME_ACCEPT4_SYSCALL):
Define.
Joseph Myers [Thu, 20 Feb 2014 03:29:34 +0000 (03:29 +0000)]
Update ARM HWCAP data.
This patch updates the ARM HWCAP data (both bits/hwcap.h and
dl-procinfo.[ch]) to match Linux 3.13.
* sysdeps/unix/sysv/linux/arm/bits/hwcap.h (HWCAP_ARM_VFPD32): New
macro.
(HWCAP_ARM_LPAE): Likewise.
(HWCAP_ARM_EVTSTRM): Likewise.
* sysdeps/unix/sysv/linux/arm/dl-procinfo.c (_dl_arm_cap_flags):
Add vpfd32, lpae and evtstrm.
* sysdeps/unix/sysv/linux/arm/dl-procinfo.h (_DL_HWCAP_COUNT):
Increase to 22.
Joseph Myers [Wed, 19 Feb 2014 14:26:29 +0000 (14:26 +0000)]
Move tests of clog10 from libm-test.inc to auto-libm-test-in.
This patch moves tests of clog10 to auto-libm-test-in. Note that this
means gen-auto-libm-tests will now depend on the recent MPC 1.0.2
release which added a fix for a bug that made gen-auto-libm-tests hang
for clog10. (It still can't conveniently be used for cacos cacosh
casin casinh catan catanh csin csinh because of extreme slowness of
those functions for special cases in MPC; at least some slow cases of
csin / csinh are fixed in MPC trunk, but not in a release.)
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of clog10.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (clog10_test_data): Use AUTO_TESTS_c_c.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Andreas Schwab [Tue, 18 Feb 2014 09:57:25 +0000 (10:57 +0100)]
Properly fix memory leak in _nss_dns_gethostbyname4_r with big DNS answer
Instead of trying to guess whether the second buffer needs to be freed
set a flag at the place it is allocated
projects / platform / upstream / glibc.git / log