review.tizen.org Git - platform/kernel/linux-starfive.git/log

ASoC: SOF: Intel: pci-tgl: unblock S5 entry if DMA stop has failed"

[ Upstream commit 2aa2a5ead0ee0a358bf80a2984a641d1bf2adc2a ]

If system shutdown has not been completed cleanly, it is possible the
DMA stream shutdown has not been done, or was not clean.

If this is the case, Intel TGL/ADL HDA platforms may fail to shutdown
cleanly due to pending HDA DMA transactions. To avoid this, detect this
scenario in the shutdown callback, and perform an additional controller
reset. This has been tested to unblock S5 entry if this condition is
hit.

Co-developed-by: Archana Patni <archana.patni@intel.com>
Signed-off-by: Archana Patni <archana.patni@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221209114529.3909192-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: also return I/O command effects from nvme_command_effects

[ Upstream commit 831ed60c2aca2d7c517b2da22897a90224a97d27 ]

To be able to use the Commands Supported and Effects Log for allowing
unprivileged passtrough, it needs to be corretly reported for I/O
commands as well. Return the I/O command effects from
nvme_command_effects, and also add a default list of effects for the
NVM command set. For other command sets, the Commands Supported and
Effects log is required to be present already.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it

[ Upstream commit 61f37154c599cf9f2f84dcbd9be842f8645a7099 ]

Use NVME_CMD_EFFECTS_CSUPP instead of open coding it and assign a
single value to multiple array entries instead of repeated assignments.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: alloc_string_stream_fragment error handling bug fix

[ Upstream commit 93ef83050e597634d2c7dc838a28caf5137b9404 ]

When it fails to allocate fragment, it does not free and return error.
And check the pointer inappropriately.

Fixed merge conflicts with
commit 618887768bb7 ("kunit: update NULL vs IS_ERR() tests")
Shuah Khan <skhan@linuxfoundation.org>

Signed-off-by: YoungJun.park <her0gyugyu@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: check for valid register opcode earlier

[ Upstream commit 343190841a1f22b96996d9f8cfab902a4d1bfd0e ]

We only check the register opcode value inside the restricted ring
section, move it into the main io_uring_register() function instead
and check it up front.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: video: Don't enable fallback path for creating ACPI backlight by default

[ Upstream commit 5aa9d943e9b6bf6e6023645cbe7ce7d5ed84baf4 ]

The ACPI video detection code has a module parameter
`register_backlight_delay` which is currently configured to 8 seconds.
This means that if after 8 seconds of booting no native driver has created
a backlight device then the code will attempt to make an ACPI video
backlight device.

This was intended as a safety mechanism with the backlight overhaul that
occurred in kernel 6.1, but as it doesn't appear necesssary set it to be
disabled by default.

Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Report to ACPI video if no panels were found

[ Upstream commit c573e240609ff781a0246c0c8c8351abd0475287 ]

On desktop APUs amdgpu doesn't create a native backlight device
as no eDP panels are found. However if the BIOS has reported
backlight control methods in the ACPI tables then an acpi_video0
backlight device will be made 8 seconds after boot.

This has manifested in a power slider on a number of desktop APUs
ranging from Ryzen 5000 through Ryzen 7000 on various motherboard
manufacturers. To avoid this, report to the acpi video detection
that the system does not have any panel connected in the native
driver.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1783786
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: video: Allow GPU drivers to report no panels

[ Upstream commit 00a734104af7d878f1252d49eff9298785c6cbdc ]

The current logic for the ACPI backlight detection will create
a backlight device if no native or vendor drivers have created
8 seconds after the system has booted if the ACPI tables
included backlight control methods.

If the GPU drivers have loaded, they may be able to report whether
any LCD panels were found. Allow using this information to factor
in whether to enable the fallback logic for making an acpi_video0
backlight device.

Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: fix multipath crash caused by flush request when blktrace is enabled

[ Upstream commit 3659fb5ac29a5e6102bebe494ac789fd47fb78f4 ]

The flush request initialized by blk_kick_flush has NULL bio,
and it may be dealt with nvme_end_req during io completion.
When blktrace is enabled, nvme_trace_bio_complete with multipath
activated trying to access NULL pointer bio from flush request
results in the following crash:

[ 2517.831677] BUG: kernel NULL pointer dereference, address: 000000000000001a
[ 2517.835213] #PF: supervisor read access in kernel mode
[ 2517.838724] #PF: error_code(0x0000) - not-present page
[ 2517.842222] PGD 7b2d51067 P4D 0
[ 2517.845684] Oops: 0000 [#1] SMP NOPTI
[ 2517.849125] CPU: 2 PID: 732 Comm: kworker/2:1H Kdump: loaded Tainted: G S                5.15.67-0.cl9.x86_64 #1
[ 2517.852723] Hardware name: XFUSION 2288H V6/BC13MBSBC, BIOS 1.13 07/27/2022
[ 2517.856358] Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp]
[ 2517.859993] RIP: 0010:blk_add_trace_bio_complete+0x6/0x30
[ 2517.863628] Code: 1f 44 00 00 48 8b 46 08 31 c9 ba 04 00 10 00 48 8b 80 50 03 00 00 48 8b 78 50 e9 e5 fe ff ff 0f 1f 44 00 00 41 54 49 89 f4 55 <0f> b6 7a 1a 48 89 d5 e8 3e 1c 2b 00 48 89 ee 4c 89 e7 5d 89 c1 ba
[ 2517.871269] RSP: 0018:ff7f6a008d9dbcd0 EFLAGS: 00010286
[ 2517.875081] RAX: ff3d5b4be00b1d50 RBX: 0000000002040002 RCX: ff3d5b0a270f2000
[ 2517.878966] RDX: 0000000000000000 RSI: ff3d5b0b021fb9f8 RDI: 0000000000000000
[ 2517.882849] RBP: ff3d5b0b96a6fa00 R08: 0000000000000001 R09: 0000000000000000
[ 2517.886718] R10: 000000000000000c R11: 000000000000000c R12: ff3d5b0b021fb9f8
[ 2517.890575] R13: 0000000002000000 R14: ff3d5b0b021fb1b0 R15: 0000000000000018
[ 2517.894434] FS:  0000000000000000(0000) GS:ff3d5b42bfc80000(0000) knlGS:0000000000000000
[ 2517.898299] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2517.902157] CR2: 000000000000001a CR3: 00000004f023e005 CR4: 0000000000771ee0
[ 2517.906053] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2517.909930] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2517.913761] PKRU: 55555554
[ 2517.917558] Call Trace:
[ 2517.921294]  <TASK>
[ 2517.924982]  nvme_complete_rq+0x1c3/0x1e0 [nvme_core]
[ 2517.928715]  nvme_tcp_recv_pdu+0x4d7/0x540 [nvme_tcp]
[ 2517.932442]  nvme_tcp_recv_skb+0x4f/0x240 [nvme_tcp]
[ 2517.936137]  ? nvme_tcp_recv_pdu+0x540/0x540 [nvme_tcp]
[ 2517.939830]  tcp_read_sock+0x9c/0x260
[ 2517.943486]  nvme_tcp_try_recv+0x65/0xa0 [nvme_tcp]
[ 2517.947173]  nvme_tcp_io_work+0x64/0x90 [nvme_tcp]
[ 2517.950834]  process_one_work+0x1e8/0x390
[ 2517.954473]  worker_thread+0x53/0x3c0
[ 2517.958069]  ? process_one_work+0x390/0x390
[ 2517.961655]  kthread+0x10c/0x130
[ 2517.965211]  ? set_kthread_struct+0x40/0x40
[ 2517.968760]  ret_from_fork+0x1f/0x30
[ 2517.972285]  </TASK>

To avoid this situation, add a NULL check for req->bio before
calling trace_block_bio_complete.

Signed-off-by: Yanjun Zhang <zhangyanjun@cestc.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring/cancel: re-grab ctx mutex after finishing wait

[ Upstream commit 23fffb2f09ce1145cbd751801d45ba74acaa6542 ]

If we have a signal pending during cancelations, it'll cause the
task_work run to return an error. Since we didn't run task_work, the
current task is left in TASK_INTERRUPTIBLE state when we need to
re-grab the ctx mutex, and the kernel will rightfully complain about
that.

Move the lock grabbing for the error cases outside the loop to avoid
that issue.

Reported-by: syzbot+7df055631cd1be4586fd@syzkaller.appspotmail.com
Link: https://lore.kernel.org/io-uring/0000000000003a14a905f05050b0@google.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix double release compute pasid

[ Upstream commit 1a799c4c190ea9f0e81028e3eb3037ed0ab17ff5 ]

If kfd_process_device_init_vm returns failure after vm is converted to
compute vm and vm->pasid set to compute pasid, KFD will not take
pdd->drm_file reference. As a result, drm close file handler maybe
called to release the compute pasid before KFD process destroy worker to
release the same pasid and set vm->pasid to zero, this generates below
WARNING backtrace and NULL pointer access.

Add helper amdgpu_amdkfd_gpuvm_set_vm_pasid and call it at the last step
of kfd_process_device_init_vm, to ensure vm pasid is the original pasid
if acquiring vm failed or is the compute pasid with pdd->drm_file
reference taken to avoid double release same pasid.

amdgpu: Failed to create process VM object
ida_free called for id=32770 which is not allocated.
WARNING: CPU: 57 PID: 72542 at ../lib/idr.c:522 ida_free+0x96/0x140
RIP: 0010:ida_free+0x96/0x140
Call Trace:
  amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu]
  amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu]
  drm_file_free.part.13+0x216/0x270 [drm]
  drm_close_helper.isra.14+0x60/0x70 [drm]
  drm_release+0x6e/0xf0 [drm]
  __fput+0xcc/0x280
  ____fput+0xe/0x20
  task_work_run+0x96/0xc0
  do_exit+0x3d0/0xc10

BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:ida_free+0x76/0x140
Call Trace:
  amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu]
  amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu]
  drm_file_free.part.13+0x216/0x270 [drm]
  drm_close_helper.isra.14+0x60/0x70 [drm]
  drm_release+0x6e/0xf0 [drm]
  __fput+0xcc/0x280
  ____fput+0xe/0x20
  task_work_run+0x96/0xc0
  do_exit+0x3d0/0xc10

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix kfd_process_device_init_vm error handling

[ Upstream commit 29d48b87db64b6697ddad007548e51d032081c59 ]

Should only destroy the ib_mem and let process cleanup worker to free
the outstanding BOs. Reset the pointer in pdd->qpd structure, to avoid
NULL pointer access in process destroy worker.

BUG: kernel NULL pointer dereference, address: 0000000000000010
Call Trace:
  amdgpu_amdkfd_gpuvm_unmap_gtt_bo_from_kernel+0x46/0xb0 [amdgpu]
  kfd_process_device_destroy_cwsr_dgpu+0x40/0x70 [amdgpu]
  kfd_process_destroy_pdds+0x71/0x190 [amdgpu]
  kfd_process_wq_release+0x2a2/0x3b0 [amdgpu]
  process_one_work+0x2a1/0x600
  worker_thread+0x39/0x3d0

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix size validation for non-exclusive domains (v4)

[ Upstream commit 7554886daa31eacc8e7fac9e15bbce67d10b8f1f ]

Fix amdgpu_bo_validate_size() to check whether the TTM domain manager for the
requested memory exists, else we get a kernel oops when dereferencing "man".

v2: Make the patch standalone, i.e. not dependent on local patches.
v3: Preserve old behaviour and just check that the manager pointer is not
NULL.
v4: Complain if GTT domain requested and it is uninitialized--most likely a
bug.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: mediatek: initialize panic_info to zero

[ Upstream commit 7bd220f2ba9014b78f0304178103393554b8c4fe ]

Coverity spotted that panic_info is not initialized to zero in
mtk_adsp_dump. Using uninitialized value panic_info.linenum when
calling snd_sof_get_status. Fix this coverity by initializing
panic_info struct as zero.

Signed-off-by: YC Hung <yc.hung@mediatek.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20221213115617.25086-1-yc.hung@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: bytcr_rt5640: Add quirk for the Advantech MICA-071 tablet

[ Upstream commit a1dec9d70b6ad97087b60b81d2492134a84208c6 ]

The Advantech MICA-071 tablet deviates from the defaults for
a non CR Bay Trail based tablet in several ways:

1. It uses an analog MIC on IN3 rather then using DMIC1
2. It only has 1 speaker
3. It needs the OVCD current threshold to be set to 1500uA instead of
the default 2000uA to reliable differentiate between headphones vs
headsets

Add a quirk with these settings for this tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221213123246.11226-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

9p/client: fix data race on req->status

[ Upstream commit 1a4f69ef15ec29b213e2b086b2502644e8ef76ee ]

KCSAN reported a race between writing req->status in p9_client_cb and
accessing it in p9_client_rpc's wait_event.

Accesses to req itself is protected by the data barrier (writing req
fields, write barrier, writing status // reading status, read barrier,
reading other req fields), but status accesses themselves apparently
also must be annotated properly with WRITE_ONCE/READ_ONCE when we
access it without locks.

Follows:
- error paths writing status in various threads all can notify
p9_client_rpc, so these all also need WRITE_ONCE
- there's a similar read loop in trans_virtio for zc case that also
needs READ_ONCE
- other reads in trans_fd should be protected by the trans_fd lock and
lists state machine, as corresponding writers all are within trans_fd
and should be under the same lock. If KCSAN complains on them we likely
will have something else to fix as well, so it's better to leave them
unmarked and look again if required.

Link: https://lkml.kernel.org/r/20221205124756.426350-1-asmadeus@codewreck.org
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Revert: "core: unregister clients and machine drivers in .shutdown"

[ Upstream commit 44fda61d2bcfb74a942df93959e083a4e8eff75f ]

The unregister machine drivers call is not safe to do when
kexec is used. Kexec-lite gets blocked with following backtrace:

[   84.943749] Freezing user space processes ... (elapsed 0.111 seconds) done.
[  246.784446] INFO: task kexec-lite:5123 blocked for more than 122 seconds.
[  246.819035] Call Trace:
[  246.821782]  <TASK>
[  246.824186]  __schedule+0x5f9/0x1263
[  246.828231]  schedule+0x87/0xc5
[  246.831779]  snd_card_disconnect_sync+0xb5/0x127
...
[  246.889249]  snd_sof_device_shutdown+0xb4/0x150
[  246.899317]  pci_device_shutdown+0x37/0x61
[  246.903990]  device_shutdown+0x14c/0x1d6
[  246.908391]  kernel_kexec+0x45/0xb9

This reverts commit 83bfc7e793b555291785136c3ae86abcdc046887.

Reported-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221209114529.3909192-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfs/hfsplus: avoid WARN_ON() for sanity check, use proper error handling

[ Upstream commit cb7a95af78d29442b8294683eca4897544b8ef46 ]

Commit 55d1cbbbb29e ("hfs/hfsplus: use WARN_ON for sanity check") fixed
a build warning by turning a comment into a WARN_ON(), but it turns out
that syzbot then complains because it can trigger said warning with a
corrupted hfs image.

The warning actually does warn about a bad situation, but we are much
better off just handling it as the error it is. So rather than warn
about us doing bad things, stop doing the bad things and return -EIO.

While at it, also fix a memory leak that was introduced by an earlier
fix for a similar syzbot warning situation, and add a check for one case
that historically wasn't handled at all (ie neither comment nor
subsequent WARN_ON).

Reported-by: syzbot+7bb7cd3595533513a9e7@syzkaller.appspotmail.com
Fixes: 55d1cbbbb29e ("hfs/hfsplus: use WARN_ON for sanity check")
Fixes: 8d824e69d9f3 ("hfs: fix OOB Read in __hfs_brec_find")
Link: https://lore.kernel.org/lkml/000000000000dbce4e05f170f289@google.com/
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: xilinx: include linux/gpio/consumer.h

[ Upstream commit e498a04443240c15c3c857165f7b652b87f4fd96 ]

The newly added gpio consumer calls cause a build failure in configurations
that fail to include the right header implicitly:

drivers/usb/dwc3/dwc3-xilinx.c: In function 'dwc3_xlnx_init_zynqmp':
drivers/usb/dwc3/dwc3-xilinx.c:207:22: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_clk_get_optional'? [-Werror=implicit-function-declaration]
  207 |         reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
      |                      ^~~~~~~~~~~~~~~~~~~~~~~
      |                      devm_clk_get_optional

Fixes: ca05b38252d7 ("usb: dwc3: xilinx: Add gpio-reset support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230103121755.956027-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udf: Fix extension of the last extent in the file

[ Upstream commit 83c7423d1eb6806d13c521d1002cc1a012111719 ]

When extending the last extent in the file within the last block, we
wrongly computed the length of the last extent. This is mostly a
cosmetical problem since the extent does not contain any data and the
length will be fixed up by following operations but still.

Fixes: 1f3868f06855 ("udf: Fix extending file within last block")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

caif: fix memory leak in cfctrl_linkup_request()

[ Upstream commit fe69230f05897b3de758427b574fc98025dfc907 ]

When linktype is unknown or kzalloc failed in cfctrl_linkup_request(),
pkt is not released. Add release process to error path.

Fixes: b482cd2053e3 ("net-caif: add CAIF core protocol stack")
Fixes: 8d545c8f958f ("caif: Disconnect without waiting for response")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230104065146.1153009-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/ulp: prevent ULP without clone op from entering the LISTEN status

[ Upstream commit 2c02d41d71f90a5168391b6a5f2954112ba2307c ]

When an ULP-enabled socket enters the LISTEN status, the listener ULP data
pointer is copied inside the child/accepted sockets by sk_clone_lock().

The relevant ULP can take care of de-duplicating the context pointer via
the clone() operation, but only MPTCP and SMC implement such op.

Other ULPs may end-up with a double-free at socket disposal time.

We can't simply clear the ULP data at clone time, as TLS replaces the
socket ops with custom ones assuming a valid TLS ULP context is
available.

Instead completely prevent clone-less ULP sockets from entering the
LISTEN status.

Fixes: 734942cc4ea6 ("tcp: ULP infrastructure")
Reported-by: slipper <slipper.alive@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4b80c3d1dbe3d0ab072f80450c202d9bc88b4b03.1672740602.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: allow sleep in qed_mcp_trace_dump()

[ Upstream commit 5401c3e0992860b11fb4b25796e4c4f1921740df ]

By default, qed_mcp_cmd_and_union() delays 10us at a time in a loop
that can run 500K times, so calls to qed_mcp_nvm_rd_cmd()
may block the current thread for over 5s.
We observed thread scheduling delays over 700ms in production,
with stacktraces pointing to this code as the culprit.

qed_mcp_trace_dump() is called from ethtool, so sleeping is permitted.
It already can sleep in qed_mcp_halt(), which calls qed_mcp_cmd().
Add a "can sleep" parameter to qed_find_nvram_image() and
qed_nvram_read() so they can sleep during qed_mcp_trace_dump().
qed_mcp_trace_get_meta_info() and qed_mcp_trace_read_meta(),
called only by qed_mcp_trace_dump(), allow these functions to sleep.
I can't tell if the other caller (qed_grc_dump_mcp_hw_dump()) can sleep,
so keep b_can_sleep set to false when it calls these functions.

An example stacktrace from a custom warning we added to the kernel
showing a thread that has not scheduled despite long needing resched:
[ 2745.362925,17] ------------[ cut here ]------------
[ 2745.362941,17] WARNING: CPU: 23 PID: 5640 at arch/x86/kernel/irq.c:233 do_IRQ+0x15e/0x1a0()
[ 2745.362946,17] Thread not rescheduled for 744 ms after irq 99
[ 2745.362956,17] Modules linked in: ...
[ 2745.363339,17] CPU: 23 PID: 5640 Comm: lldpd Tainted: P           O    4.4.182+ #202104120910+6d1da174272d.61x
[ 2745.363343,17] Hardware name: FOXCONN MercuryB/Quicksilver Controller, BIOS H11P1N09 07/08/2020
[ 2745.363346,17]  0000000000000000 ffff885ec07c3ed8 ffffffff8131eb2f ffff885ec07c3f20
[ 2745.363358,17]  ffffffff81d14f64 ffff885ec07c3f10 ffffffff81072ac2 ffff88be98ed0000
[ 2745.363369,17]  0000000000000063 0000000000000174 0000000000000074 0000000000000000
[ 2745.363379,17] Call Trace:
[ 2745.363382,17]  <IRQ>  [<ffffffff8131eb2f>] dump_stack+0x8e/0xcf
[ 2745.363393,17]  [<ffffffff81072ac2>] warn_slowpath_common+0x82/0xc0
[ 2745.363398,17]  [<ffffffff81072b4c>] warn_slowpath_fmt+0x4c/0x50
[ 2745.363404,17]  [<ffffffff810d5a8e>] ? rcu_irq_exit+0xae/0xc0
[ 2745.363408,17]  [<ffffffff817c99fe>] do_IRQ+0x15e/0x1a0
[ 2745.363413,17]  [<ffffffff817c7ac9>] common_interrupt+0x89/0x89
[ 2745.363416,17]  <EOI>  [<ffffffff8132aa74>] ? delay_tsc+0x24/0x50
[ 2745.363425,17]  [<ffffffff8132aa04>] __udelay+0x34/0x40
[ 2745.363457,17]  [<ffffffffa04d45ff>] qed_mcp_cmd_and_union+0x36f/0x7d0 [qed]
[ 2745.363473,17]  [<ffffffffa04d5ced>] qed_mcp_nvm_rd_cmd+0x4d/0x90 [qed]
[ 2745.363490,17]  [<ffffffffa04e1dc7>] qed_mcp_trace_dump+0x4a7/0x630 [qed]
[ 2745.363504,17]  [<ffffffffa04e2556>] ? qed_fw_asserts_dump+0x1d6/0x1f0 [qed]
[ 2745.363520,17]  [<ffffffffa04e4ea7>] qed_dbg_mcp_trace_get_dump_buf_size+0x37/0x80 [qed]
[ 2745.363536,17]  [<ffffffffa04ea881>] qed_dbg_feature_size+0x61/0xa0 [qed]
[ 2745.363551,17]  [<ffffffffa04eb427>] qed_dbg_all_data_size+0x247/0x260 [qed]
[ 2745.363560,17]  [<ffffffffa0482c10>] qede_get_regs_len+0x30/0x40 [qede]
[ 2745.363566,17]  [<ffffffff816c9783>] ethtool_get_drvinfo+0xe3/0x190
[ 2745.363570,17]  [<ffffffff816cc152>] dev_ethtool+0x1362/0x2140
[ 2745.363575,17]  [<ffffffff8109bcc6>] ? finish_task_switch+0x76/0x260
[ 2745.363580,17]  [<ffffffff817c2116>] ? __schedule+0x3c6/0x9d0
[ 2745.363585,17]  [<ffffffff810dbd50>] ? hrtimer_start_range_ns+0x1d0/0x370
[ 2745.363589,17]  [<ffffffff816c1e5b>] ? dev_get_by_name_rcu+0x6b/0x90
[ 2745.363594,17]  [<ffffffff816de6a8>] dev_ioctl+0xe8/0x710
[ 2745.363599,17]  [<ffffffff816a58a8>] sock_do_ioctl+0x48/0x60
[ 2745.363603,17]  [<ffffffff816a5d87>] sock_ioctl+0x1c7/0x280
[ 2745.363608,17]  [<ffffffff8111f393>] ? seccomp_phase1+0x83/0x220
[ 2745.363612,17]  [<ffffffff811e3503>] do_vfs_ioctl+0x2b3/0x4e0
[ 2745.363616,17]  [<ffffffff811e3771>] SyS_ioctl+0x41/0x70
[ 2745.363619,17]  [<ffffffff817c6ffe>] entry_SYSCALL_64_fastpath+0x1e/0x79
[ 2745.363622,17] ---[ end trace f6954aa440266421 ]---

Fixes: c965db4446291 ("qed: Add support for debug data collection")
Signed-off-by: Caleb Sander <csander@purestorage.com>
Acked-by: Alok Prasad <palok@marvell.com>
Link: https://lore.kernel.org/r/20230103233021.1457646-1-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ublk: honor IO_URING_F_NONBLOCK for handling control command

[ Upstream commit fa8e442e832a3647cdd90f3e606c473a51bc1b26 ]

Most of control command handlers may sleep, so return -EAGAIN in case
of IO_URING_F_NONBLOCK to defer the handling into io wq context.

Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230104133235.836536-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/gvt: fix double free bug in split_2MB_gtt_entry

[ Upstream commit 4a61648af68f5ba4884f0e3b494ee1cabc4b6620 ]

If intel_gvt_dma_map_guest_page failed, it will call
ppgtt_invalidate_spt, which will finally free the spt.
But the caller function ppgtt_populate_spt_by_guest_entry
does not notice that, it will free spt again in its error
path.

Fix this by canceling the mapping of DMA address and freeing sub_spt.
Besides, leave the handle of spt destroy to caller function instead
of callee function when error occurs.

Fixes: b901b252b6cf ("drm/i915/gvt: Add 2M huge gtt support")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20221229165641.1192455-1-zyytlz.wz@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: unpin on error in intel_vgpu_shadow_mm_pin()

[ Upstream commit 3792fc508c095abd84b10ceae12bd773e61fdc36 ]

Call intel_vgpu_unpin_mm() on this error path.

Fixes: 418741480809 ("drm/i915/gvt: Adding ppgtt to GVT GEM context after shadow pdps settled.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/Y3OQ5tgZIVxyQ/WV@kili
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf stat: Fix handling of --for-each-cgroup with --bpf-counters to match non BPF mode

[ Upstream commit 54b353a20c7e8be98414754f5aff98c8a68fcc1f ]

The --for-each-cgroup can have the same cgroup multiple times, but this
confuses BPF counters (since they have the same cgroup id), making only
the last cgroup events to be counted.

Let's check the cgroup name before adding a new entry to the cgroups
list.

Before:

  $ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1

   Performance counter stats for 'system wide':

       <not counted> msec cpu-clock                        /
       <not counted>      context-switches                 /
       <not counted>      cpu-migrations                   /
       <not counted>      page-faults                      /
       <not counted>      cycles                           /
       <not counted>      instructions                     /
       <not counted>      branches                         /
       <not counted>      branch-misses                    /
            8,016.04 msec cpu-clock                        /                #    7.998 CPUs utilized
               6,152      context-switches                 /                #  767.461 /sec
                 250      cpu-migrations                   /                #   31.187 /sec
                 442      page-faults                      /                #   55.139 /sec
         613,111,487      cycles                           /                #    0.076 GHz
         280,599,604      instructions                     /                #    0.46  insn per cycle
          57,692,724      branches                         /                #    7.197 M/sec
           3,385,168      branch-misses                    /                #    5.87% of all branches

         1.002220125 seconds time elapsed

After it becomes similar to the non-BPF mode:

  $ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/  sleep 1

   Performance counter stats for 'system wide':

            8,013.38 msec cpu-clock                        /                #    7.998 CPUs utilized
               6,859      context-switches                 /                #  855.944 /sec
                 334      cpu-migrations                   /                #   41.680 /sec
                 345      page-faults                      /                #   43.053 /sec
         782,326,119      cycles                           /                #    0.098 GHz
         471,645,724      instructions                     /                #    0.60  insn per cycle
          94,963,430      branches                         /                #   11.851 M/sec
           3,685,511      branch-misses                    /                #    3.88% of all branches

         1.001864539 seconds time elapsed

Committer notes:

As a reminder, to test with BPF counters one has to use BUILD_BPF_SKEL=1
in the make command line and have clang/llvm installed when building
perf, otherwise the --bpf-counters option will not be available:

  # perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
  Error: unknown option `bpf-counters'

   Usage: perf stat [<options>] [<command>]

      -a, --all-cpus        system-wide collection from all CPUs
  <SNIP>
  #

Fixes: bb1c15b60b981d10 ("perf stat: Support regex pattern in --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf stat: Fix handling of unsupported cgroup events when using BPF counters

[ Upstream commit 2d656b0f81b22101db0447f890e39fdd736b745e ]

When --for-each-cgroup option is used, it fails when any of events is
not supported and exits immediately.  This is not how 'perf stat'
handles unsupported events.

Let's ignore the failure and proceed with others so that the output is
similar to when BPF counters are not used:

Before:

  $ sudo ./perf stat -a --bpf-counters -e L1-icache-loads,L1-dcache-loads --for-each-cgroup system.slice,user.slice sleep 1
  Failed to open first cgroup events
  $

After it shows output similat to when --bpf-counters isn't specified:

  $ sudo ./perf stat -a --bpf-counters -e L1-icache-loads,L1-dcache-loads --for-each-cgroup system.slice,user.slice sleep 1

   Performance counter stats for 'system wide':

     <not supported>      L1-icache-loads                  system.slice
          29,892,418      L1-dcache-loads                  system.slice
     <not supported>      L1-icache-loads                  user.slice
          52,497,220      L1-dcache-loads                  user.slice
  $

Fixes: 944138f048f7d759 ("perf stat: Enable BPF counter with --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf lock contention: Fix core dump related to not finding the "__sched_text_end" symbol on s/390

[ Upstream commit d8d85ce86dc82de4f88b821a78f533b9d5b22a45 ]

The test case perf lock contention dumps core on s390. Run the following
commands:

  # ./perf lock record -- ./perf bench sched messaging
  # Running 'sched/messaging' benchmark:
  # 20 sender and receiver processes per group
  # 10 groups == 400 processes run

      Total time: 2.799 [sec]
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.073 MB perf.data (100 samples) ]
  #
  # ./perf lock contention
  Segmentation fault (core dumped)
  #

The function call stack is lengthy, here are the top 5 functions:

  # gdb ./perf core.24048
  GNU gdb (GDB) Fedora Linux 12.1-6.fc37
  Core was generated by `./perf lock contention'.
  Program terminated with signal SIGSEGV, Segmentation fault.
  #0  0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
         3356 machine->sched.text_end = kmap->unmap_ip(kmap, sym->start);

(gdb) where
  #0  0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
  #1  0x000000000109f244 in callchain_id (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:957
  #2  0x000000000109e094 in get_key_by_aggr_mode (key=0x3ffea4f7290, addr=27758136, evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:586
  #3  0x000000000109f4d0 in report_lock_contention_begin_event (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1004
  #4  0x00000000010a00ae in evsel__process_contention_begin (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1254
  #5  0x00000000010a0e14 in process_sample_event (tool=0x3ffea4f8480, event=0x3ff85601ef8, sample=0x3ffea4f77d0, evsel=0x30313e0, machine=0x3029e28) at builtin-lock.c:1464
  .....

The issue is in function machine__is_lock_function() in file
./util/machine.c lines 3355:

   /* should not fail from here */
   sym = machine__find_kernel_symbol_by_name(machine, "__sched_text_end", &kmap);
   machine->sched.text_end = kmap->unmap_ip(kmap, sym->start)

On s390 the symbol __sched_text_end is *NOT* in the symbol list and the
resulting pointer sym is set to NULL. The sym->start is then a NULL pointer
access and generates the core dump.

The reason why __sched_text_end is not in the symbol list on s390 is
simple:

When the symbol list is created at perf start up with function calls

  dso__load
  +--> dso__load_vmlinux_path
       +--> dso__load_vmlinux
            +--> dso__load_sym
         +--> dso__load_sym_internal (reads kernel symbols)
+--> symbols__fixup_end
+--> symbols__fixup_duplicate

The issue is in function symbols__fixup_duplicate(). It deletes all
symbols with have the same address. On s390:

  # nm -g  ~/linux/vmlinux| fgrep c68390
  0000000000c68390 T __cpuidle_text_start
  0000000000c68390 T __sched_text_end
  #

two symbols have identical addresses and __sched_text_end is considered
duplicate (in ascending sort order) and removed from the symbol list.
Therefore it is missing and an invalid pointer reference occurs.  The
code checks for symbol __sched_text_start and when it exists assumes
symbol __sched_text_end is also in the symbol table. However this is not
the case on s390.

Same situation exists for symbol __lock_text_start:

0000000000c68770 T __cpuidle_text_end
0000000000c68770 T __lock_text_start

This symbol is also removed from the symbol table but used in function
machine__is_lock_function().

To fix this and keep duplicate symbols in the symbol table, set
symbol_conf.allow_aliases to true. This prevents the removal of
duplicate symbols in function symbols__fixup_duplicate().

Output After:

# ./perf lock contention
contended total wait  max wait  avg wait    type   caller

        48   124.39 ms 123.99 ms   2.59 ms rwsem:W unlink_anon_vmas+0x24a
        47    83.68 ms  83.26 ms   1.78 ms rwsem:W free_pgtables+0x132
         5    41.22 us  10.55 us   8.24 us rwsem:W free_pgtables+0x140
         4    40.12 us  20.55 us  10.03 us rwsem:W copy_process+0x1ac8
#

Fixes: 0d2997f750d1de39 ("perf lock: Look up callchain for the contended locks")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20221230102627.2410847-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: rndis_host: Secure rndis_query check against int overflow

[ Upstream commit c7dd13805f8b8fc1ce3b6d40f6aff47e66b72ad2 ]

Variables off and len typed as uint32 in rndis_query function
are controlled by incoming RNDIS response message thus their
value may be manipulated. Setting off to a unexpectetly large
value will cause the sum with len and 8 to overflow and pass
the implemented validation step. Consequently the response
pointer will be referring to a location past the expected
buffer boundaries allowing information leakage e.g. via
RNDIS_OID_802_3_PERMANENT_ADDRESS OID.

Fixes: ddda08624013 ("USB: rndis_host, various cleanups")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: Fix lmtst ID used in aura free

[ Upstream commit 4af1b64f80fbe1275fb02c5f1c0cef099a4a231f ]

Current code uses per_cpu pointer to get the lmtst_id mapped to
the core on which aura_free() is executed. Using per_cpu pointer
without preemption disable causing mismatch between lmtst_id and
core on which pointer gets freed. This patch fixes the issue by
disabling preemption around aura_free.

Fixes: ef6c8da71eaf ("octeontx2-pf: cn10K: Reserve LMTST lines per core")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/net/bonding/bond_3ad: return when there's no aggregator

[ Upstream commit 9c807965483f42df1d053b7436eedd6cf28ece6f ]

Otherwise we would dereference a NULL aggregator pointer when calling
__set_agg_ports_ready on the line below.

Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/ntfs3: don't hold ni_lock when calling truncate_setsize()

[ Upstream commit 0226635c304cfd5c9db9b78c259cb713819b057e ]

syzbot is reporting hung task at do_user_addr_fault() [1], for there is
a silent deadlock between PG_locked bit and ni_lock lock.

Since filemap_update_page() calls filemap_read_folio() after calling
folio_trylock() which will set PG_locked bit, ntfs_truncate() must not
call truncate_setsize() which will wait for PG_locked bit to be cleared
when holding ni_lock lock.

Link: https://lore.kernel.org/all/00000000000060d41f05f139aa44@google.com/
Link: https://syzkaller.appspot.com/bug?extid=bed15dbf10294aa4f2ae
Reported-by: syzbot <syzbot+bed15dbf10294aa4f2ae@syzkaller.appspotmail.com>
Debugged-by: Linus Torvalds <torvalds@linux-foundation.org>
Co-developed-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 4342306f0f0d ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/imx: ipuv3-plane: Fix overlay plane width

[ Upstream commit 92d43bd3bc9728c1fb114d7011d46f5ea9489e28 ]

ipu_src_rect_width() was introduced to support odd screen resolutions
such as 1366x768 by internally rounding up primary plane width to a
multiple of 8 and compensating with reduced horizontal blanking.
This also caused overlay plane width to be rounded up, which was not
intended. Fix overlay plane width by limiting the rounding up to the
primary plane.

drm_rect_width(&new_state->src) >> 16 is the same value as
drm_rect_width(dst) because there is no plane scaling support.

Fixes: 94dfec48fca7 ("drm/imx: Add 8 pixel alignment fix")
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20221108141420.176696-1-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108141420.176696-1-p.zabel@pengutronix.de
Tested-by: Ian Ray <ian.ray@ge.com>
(cherry picked from commit 4333472f8d7befe62359fecb1083cd57a6e07bfc)
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Fix resources leak in perf_data__open_dir()

[ Upstream commit 0a6564ebd953c4590663c9a3c99a3ea9920ade6f ]

In perf_data__open_dir(), opendir() opens the directory stream. Add
missing closedir() to release it after use.

Fixes: eb6176709b235b96 ("perf data: Add perf_data__open_dir_data function")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221229090903.1402395-1-linmq006@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/virtio: Fix memory leak in virtio_gpu_object_create()

[ Upstream commit a764da46cd15f8b40292d2c0b29c4bf9a3e66c7e ]

The virtio_gpu_object_shmem_init() will alloc memory and save it in
@ents, so when virtio_gpu_array_alloc() fails, this memory should be
freed, this patch fixes it.

Fixes: e7fef0923303 ("drm/virtio: Simplify error handling of virtio_gpu_object_create()")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109091905.55451-1-xiujianfeng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipset: Rework long task execution when adding/deleting entries

[ Upstream commit 5e29dc36bd5e2166b834ceb19990d9e68a734d7d ]

When adding/deleting large number of elements in one step in ipset, it can
take a reasonable amount of time and can result in soft lockup errors. The
patch 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of
consecutive elements to add/delete") tried to fix it by limiting the max
elements to process at all. However it was not enough, it is still possible
that we get hung tasks. Lowering the limit is not reasonable, so the
approach in this patch is as follows: rely on the method used at resizing
sets and save the state when we reach a smaller internal batch limit,
unlock/lock and proceed from the saved state. Thus we can avoid long
continuous tasks and at the same time removed the limit to add/delete large
number of elements in one step.

The nfnl mutex is held during the whole operation which prevents one to
issue other ipset commands in parallel.

Fixes: 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete")
Reported-by: syzbot+9204e7399656300bf271@syzkaller.appspotmail.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipset: fix hash:net,port,net hang with /0 subnet

[ Upstream commit a31d47be64b9b74f8cfedffe03e0a8a1f9e51f23 ]

The hash:net,port,net set type supports /0 subnets. However, the patch
commit 5f7b51bf09baca8e titled "netfilter: ipset: Limit the maximal range
of consecutive elements to add/delete" did not take into account it and
resulted in an endless loop. The bug is actually older but the patch
5f7b51bf09baca8e brings it out earlier.

Handle /0 subnets properly in hash:net,port,net set types.

Fixes: 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete")
Reported-by: Марк Коренберг <socketpair@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sparx5: Fix reading of the MAC address

[ Upstream commit 588ab2dc25f60efeb516b4abedb6c551949cc185 ]

There is an issue with the checking of the return value of
'of_get_mac_address', which returns 0 on success and negative value on
failure. The driver interpretated the result the opposite way. Therefore
if there was a MAC address defined in the DT, then the driver was
generating a random MAC address otherwise it would use address 0.
Fix this by checking correctly the return value of 'of_get_mac_address'

Fixes: b74ef9f9cb91 ("net: sparx5: Do not use mac_addr uninitialized in mchp_sparx5_probe()")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vxlan: Fix memory leaks in error path

[ Upstream commit 06bf62944144a92d83dd14fd1378d2a288259561 ]

The memory allocated by vxlan_vnigroup_init() is not freed in the error
path, leading to memory leaks [1]. Fix by calling
vxlan_vnigroup_uninit() in the error path.

The leaks can be reproduced by annotating gro_cells_init() with
ALLOW_ERROR_INJECTION() and then running:

# echo "100" > /sys/kernel/debug/fail_function/probability
# echo "1" > /sys/kernel/debug/fail_function/times
# echo "gro_cells_init" > /sys/kernel/debug/fail_function/inject
# printf %#x -12 > /sys/kernel/debug/fail_function/gro_cells_init/retval
# ip link add name vxlan0 type vxlan dstport 4789 external vnifilter
RTNETLINK answers: Cannot allocate memory

[1]
unreferenced object 0xffff88810db84a00 (size 512):
  comm "ip", pid 330, jiffies 4295010045 (age 66.016s)
  hex dump (first 32 bytes):
    f8 d5 76 0e 81 88 ff ff 01 00 00 00 00 00 00 02  ..v.............
    03 00 04 00 48 00 00 00 00 00 00 01 04 00 01 00  ....H...........
  backtrace:
    [<ffffffff81a3097a>] kmalloc_trace+0x2a/0x60
    [<ffffffff82f049fc>] vxlan_vnigroup_init+0x4c/0x160
    [<ffffffff82ecd69e>] vxlan_init+0x1ae/0x280
    [<ffffffff836858ca>] register_netdevice+0x57a/0x16d0
    [<ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50
    [<ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130
    [<ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0
    [<ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0
    [<ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40
    [<ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440
    [<ffffffff839066af>] netlink_unicast+0x53f/0x810
    [<ffffffff839072d8>] netlink_sendmsg+0x958/0xe70
    [<ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90
    [<ffffffff835cd6da>] ___sys_sendmsg+0x13a/0x1e0
    [<ffffffff835cd94c>] __sys_sendmsg+0x11c/0x1f0
    [<ffffffff8424da78>] do_syscall_64+0x38/0x80
unreferenced object 0xffff88810e76d5f8 (size 192):
  comm "ip", pid 330, jiffies 4295010045 (age 66.016s)
  hex dump (first 32 bytes):
    04 00 00 00 00 00 00 00 db e1 4f e7 00 00 00 00  ..........O.....
    08 d6 76 0e 81 88 ff ff 08 d6 76 0e 81 88 ff ff  ..v.......v.....
  backtrace:
    [<ffffffff81a3162e>] __kmalloc_node+0x4e/0x90
    [<ffffffff81a0e166>] kvmalloc_node+0xa6/0x1f0
    [<ffffffff8276e1a3>] bucket_table_alloc.isra.0+0x83/0x460
    [<ffffffff8276f18b>] rhashtable_init+0x43b/0x7c0
    [<ffffffff82f04a1c>] vxlan_vnigroup_init+0x6c/0x160
    [<ffffffff82ecd69e>] vxlan_init+0x1ae/0x280
    [<ffffffff836858ca>] register_netdevice+0x57a/0x16d0
    [<ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50
    [<ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130
    [<ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0
    [<ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0
    [<ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40
    [<ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440
    [<ffffffff839066af>] netlink_unicast+0x53f/0x810
    [<ffffffff839072d8>] netlink_sendmsg+0x958/0xe70
    [<ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90

Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: cbq: dont intepret cls results when asked to drop

[ Upstream commit caa4b35b4317d5147b3ab0fbdc9c075c7d2e9c12 ]

If asked to drop a packet via TC_ACT_SHOT it is unsafe to assume that
res.class contains a valid pointer

Sample splat reported by Kyle Zeng

[    5.405624] 0: reclassify loop, rule prio 0, protocol 800
[    5.406326] ==================================================================
[    5.407240] BUG: KASAN: slab-out-of-bounds in cbq_enqueue+0x54b/0xea0
[    5.407987] Read of size 1 at addr ffff88800e3122aa by task poc/299
[    5.408731]
[    5.408897] CPU: 0 PID: 299 Comm: poc Not tainted 5.10.155+ #15
[    5.409516] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.15.0-1 04/01/2014
[    5.410439] Call Trace:
[    5.410764]  dump_stack+0x87/0xcd
[    5.411153]  print_address_description+0x7a/0x6b0
[    5.411687]  ? vprintk_func+0xb9/0xc0
[    5.411905]  ? printk+0x76/0x96
[    5.412110]  ? cbq_enqueue+0x54b/0xea0
[    5.412323]  kasan_report+0x17d/0x220
[    5.412591]  ? cbq_enqueue+0x54b/0xea0
[    5.412803]  __asan_report_load1_noabort+0x10/0x20
[    5.413119]  cbq_enqueue+0x54b/0xea0
[    5.413400]  ? __kasan_check_write+0x10/0x20
[    5.413679]  __dev_queue_xmit+0x9c0/0x1db0
[    5.413922]  dev_queue_xmit+0xc/0x10
[    5.414136]  ip_finish_output2+0x8bc/0xcd0
[    5.414436]  __ip_finish_output+0x472/0x7a0
[    5.414692]  ip_finish_output+0x5c/0x190
[    5.414940]  ip_output+0x2d8/0x3c0
[    5.415150]  ? ip_mc_finish_output+0x320/0x320
[    5.415429]  __ip_queue_xmit+0x753/0x1760
[    5.415664]  ip_queue_xmit+0x47/0x60
[    5.415874]  __tcp_transmit_skb+0x1ef9/0x34c0
[    5.416129]  tcp_connect+0x1f5e/0x4cb0
[    5.416347]  tcp_v4_connect+0xc8d/0x18c0
[    5.416577]  __inet_stream_connect+0x1ae/0xb40
[    5.416836]  ? local_bh_enable+0x11/0x20
[    5.417066]  ? lock_sock_nested+0x175/0x1d0
[    5.417309]  inet_stream_connect+0x5d/0x90
[    5.417548]  ? __inet_stream_connect+0xb40/0xb40
[    5.417817]  __sys_connect+0x260/0x2b0
[    5.418037]  __x64_sys_connect+0x76/0x80
[    5.418267]  do_syscall_64+0x31/0x50
[    5.418477]  entry_SYSCALL_64_after_hwframe+0x61/0xc6
[    5.418770] RIP: 0033:0x473bb7
[    5.418952] Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00
00 00 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2a 00 00
00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 18 89 54 24 0c 48 89 34
24 89
[    5.420046] RSP: 002b:00007fffd20eb0f8 EFLAGS: 00000246 ORIG_RAX:
000000000000002a
[    5.420472] RAX: ffffffffffffffda RBX: 00007fffd20eb578 RCX: 0000000000473bb7
[    5.420872] RDX: 0000000000000010 RSI: 00007fffd20eb110 RDI: 0000000000000007
[    5.421271] RBP: 00007fffd20eb150 R08: 0000000000000001 R09: 0000000000000004
[    5.421671] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
[    5.422071] R13: 00007fffd20eb568 R14: 00000000004fc740 R15: 0000000000000002
[    5.422471]
[    5.422562] Allocated by task 299:
[    5.422782]  __kasan_kmalloc+0x12d/0x160
[    5.423007]  kasan_kmalloc+0x5/0x10
[    5.423208]  kmem_cache_alloc_trace+0x201/0x2e0
[    5.423492]  tcf_proto_create+0x65/0x290
[    5.423721]  tc_new_tfilter+0x137e/0x1830
[    5.423957]  rtnetlink_rcv_msg+0x730/0x9f0
[    5.424197]  netlink_rcv_skb+0x166/0x300
[    5.424428]  rtnetlink_rcv+0x11/0x20
[    5.424639]  netlink_unicast+0x673/0x860
[    5.424870]  netlink_sendmsg+0x6af/0x9f0
[    5.425100]  __sys_sendto+0x58d/0x5a0
[    5.425315]  __x64_sys_sendto+0xda/0xf0
[    5.425539]  do_syscall_64+0x31/0x50
[    5.425764]  entry_SYSCALL_64_after_hwframe+0x61/0xc6
[    5.426065]
[    5.426157] The buggy address belongs to the object at ffff88800e312200
[    5.426157]  which belongs to the cache kmalloc-128 of size 128
[    5.426955] The buggy address is located 42 bytes to the right of
[    5.426955]  128-byte region [ffff88800e312200, ffff88800e312280)
[    5.427688] The buggy address belongs to the page:
[    5.427992] page:000000009875fabc refcount:1 mapcount:0
mapping:0000000000000000 index:0x0 pfn:0xe312
[    5.428562] flags: 0x100000000000200(slab)
[    5.428812] raw: 0100000000000200 dead000000000100 dead000000000122
ffff888007843680
[    5.429325] raw: 0000000000000000 0000000000100010 00000001ffffffff
ffff88800e312401
[    5.429875] page dumped because: kasan: bad access detected
[    5.430214] page->mem_cgroup:ffff88800e312401
[    5.430471]
[    5.430564] Memory state around the buggy address:
[    5.430846]  ffff88800e312180: fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc fc
[    5.431267]  ffff88800e312200: 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 fc
[    5.431705] >ffff88800e312280: fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc fc
[    5.432123]                                   ^
[    5.432391]  ffff88800e312300: 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 fc
[    5.432810]  ffff88800e312380: fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc fc
[    5.433229] ==================================================================
[    5.433648] Disabling lock debugging due to kernel taint

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: atm: dont intepret cls results when asked to drop

[ Upstream commit a2965c7be0522eaa18808684b7b82b248515511b ]

If asked to drop a packet via TC_ACT_SHOT it is unsafe to assume
res.class contains a valid pointer
Fixes: b0188d4dbe5f ("[NET_SCHED]: sch_atm: Lindent")

Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: sifive: Fix refcount leak in sifive_gpio_probe

[ Upstream commit 694175cd8a1643cde3acb45c9294bca44a8e08e9 ]

of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: 96868dce644d ("gpio/sifive: Add GPIO driver for SiFive SoCs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: switch to vfs_inode_has_locks() to fix file lock bug

[ Upstream commit 461ab10ef7e6ea9b41a0571a7fc6a72af9549a3c ]

For the POSIX locks they are using the same owner, which is the
thread id. And multiple POSIX locks could be merged into single one,
so when checking whether the 'file' has locks may fail.

For a file where some openers use locking and others don't is a
really odd usage pattern though. Locks are like stoplights -- they
only work if everyone pays attention to them.

Just switch ceph_get_caps() to check whether any locks are set on
the inode. If there are POSIX/OFD/FLOCK locks on the file at the
time, we should set CHECK_FILELOCK, regardless of what fd was used
to set the lock.

Fixes: ff5d913dfc71 ("ceph: return -EIO if read/write against filp that lost file locks")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

filelock: new helper: vfs_inode_has_locks

[ Upstream commit ab1ddef98a715eddb65309ffa83267e4e84a571e ]

Ceph has a need to know whether a particular inode has any locks set on
it. It's currently tracking that by a num_locks field in its
filp->private_data, but that's problematic as it tries to decrement this
field when releasing locks and that can race with the file being torn
down.

Add a new vfs_inode_has_locks helper that just returns whether any locks
are currently held on the inode.

Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Stable-dep-of: 461ab10ef7e6 ("ceph: switch to vfs_inode_has_locks() to fix file lock bug")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: Reduce the FIFO lines held when AFBC is not used

[ Upstream commit 3b754ed6d1cd90017e66e5cc16f3923e4a952ffc ]

Having a bigger number of FIFO lines held after vsync is only useful to
SoCs using AFBC to give time to the AFBC decoder to be reset, configured
and enabled again.

For SoCs not using AFBC this, on the contrary, is causing on some
displays issues and a few pixels vertical offset in the displayed image.

Conditionally increase the number of lines held after vsync only for
SoCs using AFBC, leaving the default value for all the others.

Fixes: 24e0d4058eff ("drm/meson: hold 32 lines after vsync to give time for AFBC start")
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
[narmstrong: added fixes tag]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216-afbc_s905x-v1-0-033bebf780d9@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier

[ Upstream commit 1856628baa17032531916984808d1bdfd62700d4 ]

Return non-zero return value if there is any failure reported in this
script during the test. Otherwise it can only reflect the status of
the last command.

Fixes: f86ca07eb531 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: fix cleanup_v6() for arp_ndisc_evict_nocarrier

[ Upstream commit 9c4d7f45d60745a1cea0e841fa5e3444c398d2f1 ]

The cleanup_v6() will cause the arp_ndisc_evict_nocarrier script exit
with 255 (No such file or directory), even the tests are good:

# selftests: net: arp_ndisc_evict_nocarrier.sh
# run arp_evict_nocarrier=1 test
# RTNETLINK answers: File exists
# ok
# run arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run all.arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run ndisc_evict_nocarrier=1 test
# ok
# run ndisc_evict_nocarrier=0 test
# ok
# run all.ndisc_evict_nocarrier=0 test
# ok
not ok 1 selftests: net: arp_ndisc_evict_nocarrier.sh # exit=255

This is because it's trying to modify the parameter for ipv4 instead.

Also, tests for ipv6 (run_ndisc_evict_nocarrier_enabled() and
run_ndisc_evict_nocarrier_disabled() are working on veth1, reflect
this fact in cleanup_v6().

Fixes: f86ca07eb531 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Fix validation of max_rd_atomic caps for DC

[ Upstream commit 8de8482fe5732fbef4f5af82bc0c0362c804cd1f ]

Currently, when modifying DC, we validate max_rd_atomic user attribute
against the RC cap, validate against DC. RC and DC QP types have different
device limitations.

This can cause userspace created DC QPs to malfunction.

Fixes: c32a4f296e1d ("IB/mlx5: Add support for DC Initiator QP")
Link: https://lore.kernel.org/r/0c5aee72cea188c3bb770f4207cce7abc9b6fc74.1672231736.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Fix mlx5_ib_get_hw_stats when used for device

[ Upstream commit 38b50aa44495d5eb4218f0b82fc2da76505cec53 ]

Currently, when mlx5_ib_get_hw_stats() is used for device (port_num = 0),
there is a special handling in order to use the correct counters, but,
port_num is being passed down the stack without any change.  Also, some
functions assume that port_num >=1. As a result, the following oops can
occur.

BUG: unable to handle page fault for address: ffff89510294f1a8
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP
CPU: 8 PID: 1382 Comm: devlink Tainted: G W          6.1.0-rc4_for_upstream_base_2022_11_10_16_12 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock+0xc/0x20
Call Trace:
  <TASK>
  mlx5_ib_get_native_port_mdev+0x73/0xe0 [mlx5_ib]
  do_get_hw_stats.constprop.0+0x109/0x160 [mlx5_ib]
  mlx5_ib_get_hw_stats+0xad/0x180 [mlx5_ib]
  ib_setup_device_attrs+0xf0/0x290 [ib_core]
  ib_register_device+0x3bb/0x510 [ib_core]
  ? atomic_notifier_chain_register+0x67/0x80
  __mlx5_ib_add+0x2b/0x80 [mlx5_ib]
  mlx5r_probe+0xb8/0x150 [mlx5_ib]
  ? auxiliary_match_id+0x6a/0x90
  auxiliary_bus_probe+0x3c/0x70
  ? driver_sysfs_add+0x6b/0x90
  really_probe+0xcd/0x380
  __driver_probe_device+0x80/0x170
  driver_probe_device+0x1e/0x90
  __device_attach_driver+0x7d/0x100
  ? driver_allows_async_probing+0x60/0x60
  ? driver_allows_async_probing+0x60/0x60
  bus_for_each_drv+0x7b/0xc0
  __device_attach+0xbc/0x200
  bus_probe_device+0x87/0xa0
  device_add+0x404/0x940
  ? dev_set_name+0x53/0x70
  __auxiliary_device_add+0x43/0x60
  add_adev+0x99/0xe0 [mlx5_core]
  mlx5_attach_device+0xc8/0x120 [mlx5_core]
  mlx5_load_one_devl_locked+0xb2/0xe0 [mlx5_core]
  devlink_reload+0x133/0x250
  devlink_nl_cmd_reload+0x480/0x570
  ? devlink_nl_pre_doit+0x44/0x2b0
  genl_family_rcv_msg_doit.isra.0+0xc2/0x110
  genl_rcv_msg+0x180/0x2b0
  ? devlink_nl_cmd_region_read_dumpit+0x540/0x540
  ? devlink_reload+0x250/0x250
  ? devlink_put+0x50/0x50
  ? genl_family_rcv_msg_doit.isra.0+0x110/0x110
  netlink_rcv_skb+0x54/0x100
  genl_rcv+0x24/0x40
  netlink_unicast+0x1f6/0x2c0
  netlink_sendmsg+0x237/0x490
  sock_sendmsg+0x33/0x40
  __sys_sendto+0x103/0x160
  ? handle_mm_fault+0x10e/0x290
  ? do_user_addr_fault+0x1c0/0x5f0
  __x64_sys_sendto+0x25/0x30
  do_syscall_64+0x3d/0x90
  entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fix it by setting port_num to 1 in order to get device status and remove
unused variable.

Fixes: aac4492ef23a ("IB/mlx5: Update counter implementation for dual port RoCE")
Link: https://lore.kernel.org/r/98b82994c3cd3fa593b8a75ed3f3901e208beb0f.1672231736.git.leonro@nvidia.com
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: pca953x: avoid to use uninitialized value pinctrl

[ Upstream commit 90fee3dd5bfc1b9f4c8c0ba6cd2a35c9d79ca4de ]

There is a variable pinctrl declared without initializer. And then
has the case (switch operation chose the default case) to directly
use this uninitialized value, this is not a safe behavior. So here
initialize the pinctrl as 0 to avoid this issue.
This is reported by Coverity.

Fixes: 13c5d4ce8060 ("gpio: pca953x: Add support for PCAL6534")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: xgmiitorgmii: Fix refcount leak in xgmiitorgmii_probe

[ Upstream commit d039535850ee47079d59527e96be18d8e0daa84b ]

of_phy_find_device() return device node with refcount incremented.
Call put_device() to relese it when not needed anymore.

Fixes: ab4e6ee578e8 ("net: phy: xgmiitorgmii: Check phy_driver ready before accessing")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Update NUMA TPH hint register upon NUMA node update

[ Upstream commit a8ee104f986e720cea52133885cc822d459398c7 ]

The device supports a PCIe optimization hint, which indicates on
which NUMA the queue is currently processed. This hint is utilized
by PCIe in order to reduce its access time by accessing the
correct NUMA resources and maintaining cache coherence.

The driver calls the register update for the hint (called TPH -
TLP Processing Hint) during the NAPI loop.

Though the update is expected upon a NUMA change (when a queue
is moved from one NUMA to the other), the current logic performs
a register update when the queue is moved to a different CPU,
but the CPU is not necessarily in a different NUMA.

The changes include:
1. Performing the TPH update only when the queue has switched
a NUMA node.
2. Moving the TPH update call to be triggered only when NAPI was
scheduled from interrupt context, as opposed to a busy-polling loop.
This is due to the fact that during busy-polling, the frequency
of CPU switches for a particular queue is significantly higher,
thus, the likelihood to switch NUMA is much higher. Therefore,
providing the frequent updates to the device upon a NUMA update
are unlikely to be beneficial.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Set default value for RX interrupt moderation

[ Upstream commit e712f3e4920b3a1a5e6b536827d118e14862896c ]

RX ring can be NULL in XDP use cases where only TX queues
are configured. In this scenario, the RX interrupt moderation
value sent to the device remains in its default value of 0.

In this change, setting the default value of the RX interrupt
moderation to be the same as of the TX.

Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Fix rx_copybreak value update

[ Upstream commit c7062aaee099f2f43d6f07a71744b44b94b94b34 ]

Make the upper bound on rx_copybreak tighter, by
making sure it is smaller than the minimum of mtu and
ENA_PAGE_SIZE. With the current upper bound of mtu,
rx_copybreak can be larger than a page. Such large
rx_copybreak will not bring any performance benefit to
the user and therefore makes no sense.

In addition, the value update was only reflected in
the adapter structure, but not applied for each ring,
causing it to not take effect.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Osama Abboud <osamaabb@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Use bitmask to indicate packet redirection

[ Upstream commit 59811faa2c54dbcf44d575b5a8f6e7077da88dc2 ]

Redirecting packets with XDP Redirect is done in two phases:
1. A packet is passed by the driver to the kernel using
   xdp_do_redirect().
2. After finishing polling for new packets the driver lets the kernel
   know that it can now process the redirected packet using
   xdp_do_flush_map().
   The packets' redirection is handled in the napi context of the
   queue that called xdp_do_redirect()

To avoid calling xdp_do_flush_map() each time the driver first checks
whether any packets were redirected, using
xdp_flags |= xdp_verdict;
and
if (xdp_flags & XDP_REDIRECT)
    xdp_do_flush_map()

essentially treating XDP instructions as a bitmask, which isn't the case:
    enum xdp_action {
    XDP_ABORTED = 0,
    XDP_DROP,
    XDP_PASS,
    XDP_TX,
    XDP_REDIRECT,
    };

Given the current possible values of xdp_action, the current design
doesn't have a bug (since XDP_REDIRECT = 100b), but it is still
flawed.

This patch makes the driver use a bitmask instead, to avoid future
issues.

Fixes: a318c70ad152 ("net: ena: introduce XDP redirect implementation")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Account for the number of processed bytes in XDP

[ Upstream commit c7f5e34d906320fdc996afa616676161c029cc02 ]

The size of packets that were forwarded or dropped by XDP wasn't added
to the total processed bytes statistic.

Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Don't register memory info on XDP exchange

[ Upstream commit 9c9e539956fa67efb8a65e32b72a853740b33445 ]

Since the queues aren't destroyed when we only exchange XDP programs,
there's no need to re-register them again.

Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Fix toeplitz initial hash value

[ Upstream commit 332b49ff637d6c1a75b971022a8b992cf3c57db1 ]

On driver initialization, RSS hash initial value is set to zero,
instead of the default value. This happens because we pass NULL as
the RSS key parameter, which caused us to never initialize
the RSS hash value.

This patch fixes it by making sure the initial value is set, no matter
what the value of the RSS key is.

Fixes: 91a65b7d3ed8 ("net: ena: fix potential crash when rxfh key is NULL")
Signed-off-by: Nati Koler <nkoler@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: amd-xgbe: add missed tasklet_kill

[ Upstream commit d530ece70f16f912e1d1bfeea694246ab78b0a4b ]

The driver does not call tasklet_kill in several places.
Add the calls to fix it.

Fixes: 85b85c853401 ("amd-xgbe: Re-issue interrupt if interrupt status not cleared")
Signed-off-by: Jiguang Xiao <jiguang.xiao@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: refine the handling for VF heartbeat

[ Upstream commit fec7352117fa301bfbc31bacc14bb9a579376b36 ]

Currently, the PF check the VF alive by the KEEP_ALVE
mailbox from VF. VF keep sending the mailbox per 2
seconds. Once PF lost the mailbox for more than 8
seconds, it will regards the VF is abnormal, and stop
notifying the state change to VF, include link state,
vf mac, reset, even though it receives the KEEP_ALIVE
mailbox again. It's inreasonable.

This patch fixes it. PF will record the state change which
need to notify VF when lost the VF's KEEP_ALIVE mailbox.
And notify VF when receive the mailbox again. Introduce a
new flag HCLGE_VPORT_STATE_INITED, used to distinguish the
case whether VF driver loaded or not. For VF will query
these states when initializing, so it's unnecessary to
notify it in this case.

Fixes: aa5c4f175be6 ("net: hns3: add reset handling for VF when doing PF reset")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Add TIME_WAIT sockets in bhash2.

[ Upstream commit 936a192f974018b4f6040f6f77b1cc1e75bd8666 ]

Jiri Slaby reported regression of bind() with a simple repro. [0]

The repro creates a TIME_WAIT socket and tries to bind() a new socket
with the same local address and port. Before commit 28044fc1d495 ("net:
Add a bhash2 table hashed by port and address"), the bind() failed with
-EADDRINUSE, but now it succeeds.

The cited commit should have put TIME_WAIT sockets into bhash2; otherwise,
inet_bhash2_conflict() misses TIME_WAIT sockets when validating bind()
requests if the address is not a wildcard one.

The straight option is to move sk_bind2_node from struct sock to struct
sock_common to add twsk to bhash2 as implemented as RFC. [1] However, the
binary layout change in the struct sock could affect performances moving
hot fields on different cachelines.

To avoid that, we add another TIME_WAIT list in inet_bind2_bucket and check
it while validating bind().

[0]: https://lore.kernel.org/netdev/6b971a4e-c7d8-411e-1f92-fda29b5b2fb9@kernel.org/
[1]: https://lore.kernel.org/netdev/20221221151258.25748-2-kuniyu@amazon.com/

Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Always use maximal size for copy_array()

[ Upstream commit 45435d8da71f9f3e6860e6e6ea9667b6ec17ec64 ]

Instead of counting on prior allocations to have sized allocations to
the next kmalloc bucket size, always perform a krealloc that is at least
ksize(dst) in size (which is a no-op), so the size can be correctly
tracked by all the various allocation size trackers (KASAN,
__alloc_size, etc).

Reported-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/bpf/20221223094551.GA1439509@ubuntu
Fixes: ceb35b666d42 ("bpf/verifier: Use kmalloc_size_roundup() to match ksize() usage")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: bpf@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221223182836.never.866-kees@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Lag, fix failure to cancel delayed bond work

[ Upstream commit 4d1c1379d71777ddeda3e54f8fc26e9ecbfd1009 ]

Commit 0d4e8ed139d8 ("net/mlx5: Lag, avoid lockdep warnings")
accidentally removed a call to cancel delayed bond work thus it may
cause queued delay to expire and fall on an already destroyed work
queue.

Fix by restoring the call cancel_delayed_work_sync() before
destroying the workqueue.

This prevents call trace such as this:

[  329.230417] BUG: kernel NULL pointer dereference, address: 0000000000000000
[  329.231444] #PF: supervisor write access in kernel mode
[  329.232233] #PF: error_code(0x0002) - not-present page
[  329.233007] PGD 0 P4D 0
[  329.233476] Oops: 0002 [#1] SMP
[  329.234012] CPU: 5 PID: 145 Comm: kworker/u20:4 Tainted: G OE      6.0.0-rc5_mlnx #1
[  329.235282] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  329.236868] Workqueue: mlx5_cmd_0000:08:00.1 cmd_work_handler [mlx5_core]
[  329.237886] RIP: 0010:_raw_spin_lock+0xc/0x20
[  329.238585] Code: f0 0f b1 17 75 02 f3 c3 89 c6 e9 6f 3c 5f ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 02 f3 c3 89 c6 e9 45 3c 5f ff 0f 1f 44 00 00 0f 1f
[  329.241156] RSP: 0018:ffffc900001b0e98 EFLAGS: 00010046
[  329.241940] RAX: 0000000000000000 RBX: ffffffff82374ae0 RCX: 0000000000000000
[  329.242954] RDX: 0000000000000001 RSI: 0000000000000014 RDI: 0000000000000000
[  329.243974] RBP: ffff888106ccf000 R08: ffff8881004000c8 R09: ffff888100400000
[  329.244990] R10: 0000000000000000 R11: ffffffff826669f8 R12: 0000000000002000
[  329.246009] R13: 0000000000000005 R14: ffff888100aa7ce0 R15: ffff88852ca80000
[  329.247030] FS:  0000000000000000(0000) GS:ffff88852ca80000(0000) knlGS:0000000000000000
[  329.248260] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  329.249111] CR2: 0000000000000000 CR3: 000000016d675001 CR4: 0000000000770ee0
[  329.250133] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  329.251152] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  329.252176] PKRU: 55555554

Fixes: 0d4e8ed139d8 ("net/mlx5: Lag, avoid lockdep warnings")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Set geneve_tlv_option_0_exist when matching on geneve option

[ Upstream commit e54638a8380bd9c146a883035fffd0a821813682 ]

The cited patch added support of matching on geneve option by setting
geneve_tlv_option_0_data mask and key but didn't set geneve_tlv_option_0_exist
bit which is required on some HWs when matching geneve_tlv_option_0_data parameter,
this may cause in some cases for packets to wrongly match on rules with different
geneve option.

Example of such case is packet with geneve_tlv_object class=789 and data=456
will wrongly match on rule with match geneve_tlv_object class=123 and data=456.

Fix it by setting geneve_tlv_option_0_exist bit when supported by the HW when matching
on geneve_tlv_option_0_data parameter.

Fixes: 9272e3df3023 ("net/mlx5e: Geneve, Add support for encap/decap flows offload")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix hw mtu initializing at XDP SQ allocation

[ Upstream commit 1e267ab88dc44c48f556218f7b7f14c76f7aa066 ]

Current xdp xmit functions logic (mlx5e_xmit_xdp_frame_mpwqe or
mlx5e_xmit_xdp_frame), validates xdp packet length by comparing it to
hw mtu (configured at xdp sq allocation) before xmiting it. This check
does not account for ethernet fcs length (calculated and filled by the
nic). Hence, when we try sending packets with length > (hw-mtu -
ethernet-fcs-size), the device port drops it and tx_errors_phy is
incremented. Desired behavior is to catch these packets and drop them
by the driver.

Fix this behavior in XDP SQ allocation function (mlx5e_alloc_xdpsq) by
subtracting ethernet FCS header size (4 Bytes) from current hw mtu
value, since ethernet FCS is calculated and written to ethernet frames
by the nic.

Fixes: d8bec2b29a82 ("net/mlx5e: Support bpf_xdp_adjust_head()")
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Always clear dest encap in neigh-update-del

[ Upstream commit 2951b2e142ecf6e0115df785ba91e91b6da74602 ]

The cited commit introduced a bug for multiple encapsulations flow.
If one dest encap becomes invalid, the flow is set slow path flag.
But when other dests encap become invalid, they are not cleared due
to slow path flag of the flow. When neigh-update-add is running, it
will use invalid encap.

Fix it by checking slow path flag after clearing dest encap.

Fixes: 9a5f9cc794e1 ("net/mlx5e: Fix possible use-after-free deleting fdb rule")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: CT: Fix ct debugfs folder name

[ Upstream commit 849190e3e4ccf452fbe2240eace30a9ca83fb8d2 ]

Need to use sprintf to build a string instead of sscanf. Otherwise
dirname is null and both "ct_nic" and "ct_fdb" won't be created.
But its redundant anyway as driver could be in switchdev mode but
still add nic rules. So use "ct" as folder name.

Fixes: 77422a8f6f61 ("net/mlx5e: CT: Add ct driver counters")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix RX reporter for XSK RQs

[ Upstream commit f8c18a5749cf917096f75dd59885b7a0fe9298ba ]

RX reporter mistakenly reads from the regular (inactive) RQ
when XSK RQ is active. Fix it here.

Fixes: 3db4c85cde7a ("net/mlx5e: xsk: Use queue indices starting from 0 for XSK queues")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: IPoIB, Don't allow CQE compression to be turned on by default

[ Upstream commit b12d581e83e3ae1080c32ab83f123005bd89a840 ]

mlx5e_build_nic_params will turn CQE compression on if the hardware
capability is enabled and the slow_pci_heuristic condition is detected.
As IPoIB doesn't support CQE compression, make sure to disable the
feature in the IPoIB profile init.

Please note that the feature is not exposed to the user for IPoIB
interfaces, so it can't be subsequently turned on.

Fixes: b797a684b0dd ("net/mlx5e: Enable CQE compression when PCI is slower than link")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix RoCE setting at HCA level

[ Upstream commit c4ad5f2bdad56265b23d3635494ecdb205431807 ]

mlx5 PF can disable RoCE for its VFs and SFs. In such case RoCE is
marked as unsupported on those VFs/SFs.
The cited patch added an option for disable (and enable) RoCE at HCA
level. However, that commit didn't check whether RoCE is supported on
the HCA and enabled user to try and set RoCE to on.
Fix it by checking whether the HCA supports RoCE.

Fixes: fbfa97b4d79f ("net/mlx5: Disable roce at HCA level")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Avoid recovery in probe flows

[ Upstream commit 9078e843efec530f279a155f262793c58b0746bd ]

Currently, recovery is done without considering whether the device is
still in probe flow.
This may lead to recovery before device have finished probed
successfully. e.g.: while mlx5_init_one() is running. Recovery flow is
using functionality that is loaded only by mlx5_init_one(), and there
is no point in running recovery without mlx5_init_one() finished
successfully.

Fix it by waiting for probe flow to finish and checking whether the
device is probed before trying to perform recovery.

Fixes: 51d138c2610a ("net/mlx5: Fix health error state handling")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix io_eq_size and event_eq_size params validation

[ Upstream commit 44aee8ea15ac205490a41b00cbafcccbf9f7f82b ]

io_eq_size and event_eq_size params are of param type
DEVLINK_PARAM_TYPE_U32. But, the validation callback is addressing them
as DEVLINK_PARAM_TYPE_U16.

This cause mismatch in validation in big-endian systems, in which
values in range were rejected while 268500991 was accepted.
Fix it by checking the U32 value in the validation callback.

Fixes: 0844fa5f7b89 ("net/mlx5: Let user configure io_eq_size param")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Add forgotten cleanup calls into mlx5_init_once() error path

[ Upstream commit 2a35b2c2e6a252eda2134aae6a756861d9299531 ]

There are two cleanup calls missing in mlx5_init_once() error path.
Add them making the error path flow to be the same as
mlx5_cleanup_once().

Fixes: 52ec462eca9b ("net/mlx5: Add reserved-gids support")
Fixes: 7c39afb394c7 ("net/mlx5: PTP code migration to driver core section")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: E-Switch, properly handle ingress tagged packets on VST

[ Upstream commit 1f0ae22ab470946143485a02cc1cd7e05c0f9120 ]

Fix SRIOV VST mode behavior to insert cvlan when a guest tag is already
present in the frame. Previous VST mode behavior was to drop packets or
override existing tag, depending on the device version.

In this patch we fix this behavior by correctly building the HW steering
rule with a push vlan action, or for older devices we ask the FW to stack
the vlan when a vlan is already present.

Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Fixes: dfcb1ed3c331 ("net/mlx5: E-Switch, Vport ingress/egress ACLs rules for VST mode")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpasim: fix memory leak when freeing IOTLBs

[ Upstream commit 0b7a04a30eef20e6b24926a45c0ce7906ae85bd6 ]

After commit bda324fd037a ("vdpasim: control virtqueue support"),
vdpasim->iommu became an array of IOTLB, so we should clean the
mappings of each free one by one instead of just deleting the ranges
in the first IOTLB which may leak maps.

Fixes: bda324fd037a ("vdpasim: control virtqueue support")
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221213090717.61529-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gautam Dawar <gautam.dawar@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa/vp_vdpa: fix kfree a wrong pointer in vp_vdpa_remove

[ Upstream commit ed843d6ed7310a27cf7c8ee0a82a482eed0cb4a6 ]

In vp_vdpa_remove(), the code kfree(&vp_vdpa_mgtdev->mgtdev.id_table) uses
a reference of pointer as the argument of kfree, which is the wrong pointer
and then may hit crash like this:

Unable to handle kernel paging request at virtual address 00ffff003363e30c
Internal error: Oops: 96000004 [#1] SMP
Call trace:
rb_next+0x20/0x5c
ext4_readdir+0x494/0x5c4 [ext4]
iterate_dir+0x168/0x1b4
__se_sys_getdents64+0x68/0x170
__arm64_sys_getdents64+0x24/0x30
el0_svc_common.constprop.0+0x7c/0x1bc
do_el0_svc+0x2c/0x94
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb4
el0_sync+0x160/0x180
Code: 54000220 f9400441 b4000161 aa0103e0 (f9400821)
SMP: stopping secondary CPUs
Starting crashdump kernel...

Fixes: ffbda8e9df10 ("vdpa/vp_vdpa : add vdpa tool support in vp_vdpa")
Signed-off-by: Rong Wang <wangrong68@huawei.com>
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Message-Id: <20221207120813.2837529-1-sunnanyong@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cindy Lu <lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio-crypto: fix memory leak in virtio_crypto_alg_skcipher_close_session()

[ Upstream commit b1d65f717cd6305a396a8738e022c6f7c65cfbe8 ]

'vc_ctrl_req' is alloced in virtio_crypto_alg_skcipher_close_session(),
and should be freed in the invalid ctrl_status->status error handling
case. Otherwise there is a memory leak.

Fixes: 0756ad15b1fe ("virtio-crypto: use private buffer for control request")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20221114110740.537276-1-weiyongjun@huaweicloud.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: zhenwei pi<pizhenwei@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa_sim: fix vringh initialization in vdpasim_queue_ready()

[ Upstream commit 794ec498c9fa79e6bfd71b931410d5897a9c00d4 ]

When we initialize vringh, we should pass the features and the
number of elements in the virtqueue negotiated with the driver,
otherwise operations with vringh may fail.

This was discovered in a case where the driver sets a number of
elements in the virtqueue different from the value returned by
.get_vq_num_max().

In vdpasim_vq_reset() is safe to initialize the vringh with
default values, since the virtqueue will not be used until
vdpasim_queue_ready() is called again.

Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221110141335.62171-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vhost-vdpa: fix an iotlb memory leak

[ Upstream commit c070c1912a83432530cbb4271d5b9b11fa36b67a ]

Before commit 3d5698793897 ("vhost-vdpa: introduce asid based IOTLB")
we called vhost_vdpa_iotlb_unmap(v, iotlb, 0ULL, 0ULL - 1) during
release to free all the resources allocated when processing user IOTLB
messages through vhost_vdpa_process_iotlb_update().
That commit changed the handling of IOTLB a bit, and we accidentally
removed some code called during the release.

We partially fixed this with commit 037d4305569a ("vhost-vdpa: call
vhost_vdpa_cleanup during the release") but a potential memory leak is
still there as showed by kmemleak if the application does not send
VHOST_IOTLB_INVALIDATE or crashes:

  unreferenced object 0xffff888007fbaa30 (size 16):
    comm "blkio-bench", pid 914, jiffies 4294993521 (age 885.500s)
    hex dump (first 16 bytes):
      40 73 41 07 80 88 ff ff 00 00 00 00 00 00 00 00  @sA.............
    backtrace:
      [<0000000087736d2a>] kmem_cache_alloc_trace+0x142/0x1c0
      [<0000000060740f50>] vhost_vdpa_process_iotlb_msg+0x68c/0x901 [vhost_vdpa]
      [<0000000083e8e205>] vhost_chr_write_iter+0xc0/0x4a0 [vhost]
      [<000000008f2f414a>] vhost_vdpa_chr_write_iter+0x18/0x20 [vhost_vdpa]
      [<00000000de1cd4a0>] vfs_write+0x216/0x4b0
      [<00000000a2850200>] ksys_write+0x71/0xf0
      [<00000000de8e720b>] __x64_sys_write+0x19/0x20
      [<0000000018b12cbb>] do_syscall_64+0x3f/0x90
      [<00000000986ec465>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Let's fix this calling vhost_vdpa_iotlb_unmap() on the whole range in
vhost_vdpa_remove_as(). We move that call before vhost_dev_cleanup()
since we need a valid v->vdev.mm in vhost_vdpa_pa_unmap().
vhost_iotlb_reset() call can be removed, since vhost_vdpa_iotlb_unmap()
on the whole range removes all the entries.

The kmemleak log reported was observed with a vDPA device that has `use_va`
set to true (e.g. VDUSE). This patch has been tested with both types of
devices.

Fixes: 037d4305569a ("vhost-vdpa: call vhost_vdpa_cleanup during the release")
Fixes: 3d5698793897 ("vhost-vdpa: introduce asid based IOTLB")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221109154213.146789-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vhost: fix range used in translate_desc()

[ Upstream commit 98047313cdb46828093894d0ac8b1183b8b317f9 ]

vhost_iotlb_itree_first() requires `start` and `last` parameters
to search for a mapping that overlaps the range.

In translate_desc() we cyclically call vhost_iotlb_itree_first(),
incrementing `addr` by the amount already translated, so rightly
we move the `start` parameter passed to vhost_iotlb_itree_first(),
but we should hold the `last` parameter constant.

Let's fix it by saving the `last` parameter value before incrementing
`addr` in the loop.

Fixes: a9709d6874d5 ("vhost: convert pre sorted vhost memory array to interval tree")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221109102503.18816-3-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vringh: fix range used in iotlb_translate()

[ Upstream commit f85efa9b0f5381874f727bd98f56787840313f0b ]

vhost_iotlb_itree_first() requires `start` and `last` parameters
to search for a mapping that overlaps the range.

In iotlb_translate() we cyclically call vhost_iotlb_itree_first(),
incrementing `addr` by the amount already translated, so rightly
we move the `start` parameter passed to vhost_iotlb_itree_first(),
but we should hold the `last` parameter constant.

Let's fix it by saving the `last` parameter value before incrementing
`addr` in the loop.

Fixes: 9ad9c49cfe97 ("vringh: IOTLB support")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221109102503.18816-2-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vhost/vsock: Fix error handling in vhost_vsock_init()

[ Upstream commit 7a4efe182ca61fb3e5307e69b261c57cbf434cd4 ]

A problem about modprobe vhost_vsock failed is triggered with the
following log given:

modprobe: ERROR: could not insert 'vhost_vsock': Device or resource busy

The reason is that vhost_vsock_init() returns misc_register() directly
without checking its return value, if misc_register() failed, it returns
without calling vsock_core_unregister() on vhost_transport, resulting the
vhost_vsock can never be installed later.
A simple call graph is shown as below:

vhost_vsock_init()
   vsock_core_register() # register vhost_transport
   misc_register()
     device_create_with_groups()
       device_create_groups_vargs()
         dev = kzalloc(...) # OOM happened
   # return without unregister vhost_transport

Fix by calling vsock_core_unregister() when misc_register() returns error.

Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Message-Id: <20221108101705.45981-1-yuancan@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa_sim: fix possible memory leak in vdpasim_net_init() and vdpasim_blk_init()

[ Upstream commit aeca7ff254843d49a8739f07f7dab1341450111d ]

Inject fault while probing module, if device_register() fails in
vdpasim_net_init() or vdpasim_blk_init(), but the refcount of kobject is
not decreased to 0, the name allocated in dev_set_name() is leaked.
Fix this by calling put_device(), so that name can be freed in
callback function kobject_cleanup().

(vdpa_sim_net)
unreferenced object 0xffff88807eebc370 (size 16):
  comm "modprobe", pid 3848, jiffies 4362982860 (age 18.153s)
  hex dump (first 16 bytes):
    76 64 70 61 73 69 6d 5f 6e 65 74 00 6b 6b 6b a5  vdpasim_net.kkk.
  backtrace:
    [<ffffffff8174f19e>] __kmalloc_node_track_caller+0x4e/0x150
    [<ffffffff81731d53>] kstrdup+0x33/0x60
    [<ffffffff83a5d421>] kobject_set_name_vargs+0x41/0x110
    [<ffffffff82d87aab>] dev_set_name+0xab/0xe0
    [<ffffffff82d91a23>] device_add+0xe3/0x1a80
    [<ffffffffa0270013>] 0xffffffffa0270013
    [<ffffffff81001c27>] do_one_initcall+0x87/0x2e0
    [<ffffffff813739cb>] do_init_module+0x1ab/0x640
    [<ffffffff81379d20>] load_module+0x5d00/0x77f0
    [<ffffffff8137bc40>] __do_sys_finit_module+0x110/0x1b0
    [<ffffffff83c4d505>] do_syscall_64+0x35/0x80
    [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

(vdpa_sim_blk)
unreferenced object 0xffff8881070c1250 (size 16):
  comm "modprobe", pid 6844, jiffies 4364069319 (age 17.572s)
  hex dump (first 16 bytes):
    76 64 70 61 73 69 6d 5f 62 6c 6b 00 6b 6b 6b a5  vdpasim_blk.kkk.
  backtrace:
    [<ffffffff8174f19e>] __kmalloc_node_track_caller+0x4e/0x150
    [<ffffffff81731d53>] kstrdup+0x33/0x60
    [<ffffffff83a5d421>] kobject_set_name_vargs+0x41/0x110
    [<ffffffff82d87aab>] dev_set_name+0xab/0xe0
    [<ffffffff82d91a23>] device_add+0xe3/0x1a80
    [<ffffffffa0220013>] 0xffffffffa0220013
    [<ffffffff81001c27>] do_one_initcall+0x87/0x2e0
    [<ffffffff813739cb>] do_init_module+0x1ab/0x640
    [<ffffffff81379d20>] load_module+0x5d00/0x77f0
    [<ffffffff8137bc40>] __do_sys_finit_module+0x110/0x1b0
    [<ffffffff83c4d505>] do_syscall_64+0x35/0x80
    [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: 899c4d187f6a ("vdpa_sim_blk: add support for vdpa management tool")
Fixes: a3c06ae158dd ("vdpa_sim_net: Add support for user supported devices")

Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221110082348.4105476-1-ruanjinjie@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa/mlx5: Fix wrong mac address deletion

[ Upstream commit 1ab53760d322c82fb4cb5e81b5817065801e3ec4 ]

Delete the old MAC from the table and not the new one which is not there
yet.

Fixes: baf2ad3f6a98 ("vdpa/mlx5: Add RX MAC VLAN filter support")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-4-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa/mlx5: Fix rule forwarding VLAN to TIR

[ Upstream commit a6ce72c0fb6041f9871f880b2d02b294f7f49cb4 ]

Set the VLAN id to the header values field instead of overwriting the
headers criteria field.

Before this fix, VLAN filtering would not really work and tagged packets
would be forwarded unfiltered to the TIR.

Fixes: baf2ad3f6a98 ("vdpa/mlx5: Add RX MAC VLAN filter support")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-2-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix HDS and jumbo thresholds for RX packets

[ Upstream commit a056ebcc30e2f78451d66f615d2f6bdada3e6438 ]

The recent XDP multi-buffer feature has introduced regressions in the
setting of HDS and jumbo thresholds.  HDS was accidentally disabled in
the nornmal mode without XDP.  This patch restores jumbo HDS placement
when not in XDP mode.  In XDP multi-buffer mode, HDS should be disabled
and the jumbo threshold should be set to the usable page size in the
first page buffer.

Fixes: 32861236190b ("bnxt: change receive ring space parameters")
Reviewed-by: Mohammad Shuab Siddique <mohammad-shuab.siddique@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix first buffer size calculations for XDP multi-buffer

[ Upstream commit 1abeacc1979fa4a756695f5030791d8f0fa934b9 ]

The size of the first buffer is always page size, and the useable
space is the page size minus the offset and the skb_shared_info size.
Make sure SKB and XDP buf sizes match so that the skb_shared_info
is at the same offset seen from the SKB and XDP_BUF.

build_skb() should be passed PAGE_SIZE.  xdp_init_buff() should
be passed PAGE_SIZE as well.  xdp_get_shared_info_from_buff() will
automatically deduct the skb_shared_info size if the XDP buffer
has frags.  There is no need to keep bp->xdp_has_frags.

Change BNXT_PAGE_MODE_BUF_SIZE to BNXT_MAX_PAGE_MODE_MTU_SBUF
since this constant is really the MTU with ethernet header size
subtracted.

Also fix the BNXT_MAX_PAGE_MODE_MTU macro with proper parentheses.

Fixes: 32861236190b ("bnxt: change receive ring space parameters")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix XDP RX path

[ Upstream commit 9b3e607871ea5ee90f10f5be3965fc07f2aa3ef7 ]

The XDP program can change the starting address of the RX data buffer and
this information needs to be passed back from bnxt_rx_xdp() to
bnxt_rx_pkt() for the XDP_PASS case so that the SKB can point correctly
to the modified buffer address. Add back the data_ptr parameter to
bnxt_rx_xdp() to make this work.

Fixes: b231c3f3414c ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Simplify bnxt_xdp_buff_init()

[ Upstream commit bbfc17e50ba2ed18dfef46b1c433d50a58566bf1 ]

bnxt_xdp_buff_init() does not modify the data_ptr or the len parameters,
so no need to pass in the addresses of these parameters.

Fixes: b231c3f3414c ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfc: Fix potential resource leaks

[ Upstream commit df49908f3c52d211aea5e2a14a93bbe67a2cb3af ]

nfc_get_device() take reference for the device, add missing
nfc_put_device() to release it when not need anymore.
Also fix the style warnning by use error EOPNOTSUPP instead of
ENOTSUPP.

Fixes: 5ce3f32b5264 ("NFC: netlink: SE API implementation")
Fixes: 29e76924cf08 ("nfc: netlink: Add capability to reply to vendor_cmd with data")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mv88e6xxx: depend on PTP conditionally

[ Upstream commit 30e725537546248bddc12eaac2fe0a258917f190 ]

PTP hardware timestamping related objects are not linked when PTP
support for MV88E6xxx (NET_DSA_MV88E6XXX_PTP) is disabled, therefore
NET_DSA_MV88E6XXX should not depend on PTP_1588_CLOCK_OPTIONAL
regardless of NET_DSA_MV88E6XXX_PTP.

Instead, condition more strictly on how NET_DSA_MV88E6XXX_PTP's
dependencies are met, making sure that it cannot be enabled when
NET_DSA_MV88E6XXX=y and PTP_1588_CLOCK=m.

In other words, this commit allows NET_DSA_MV88E6XXX to be built-in
while PTP_1588_CLOCK is a module, as long as NET_DSA_MV88E6XXX_PTP is
prevented from being enabled.

Fixes: e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies")
Signed-off-by: Johnny S. Lee <foss@jsl.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qlcnic: prevent ->dcb use-after-free on qlcnic_dcb_enable() failure

[ Upstream commit 13a7c8964afcd8ca43c0b6001ebb0127baa95362 ]

adapter->dcb would get silently freed inside qlcnic_dcb_enable() in
case qlcnic_dcb_attach() would return an error, which always happens
under OOM conditions. This would lead to use-after-free because both
of the existing callers invoke qlcnic_dcb_get_info() on the obtained
pointer, which is potentially freed at that point.

Propagate errors from qlcnic_dcb_enable(), and instead free the dcb
pointer at callsite using qlcnic_dcb_free(). This also removes the now
unused qlcnic_clear_dcb_ops() helper, which was a simple wrapper around
kfree() also causing memory leaks for partially initialized dcb.

Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.

Fixes: 3c44bba1d270 ("qlcnic: Disable DCB operations from SR-IOV VFs")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: fix memory leak in tcindex_set_parms

[ Upstream commit 399ab7fe0fa0d846881685fd4e57e9a8ef7559f7 ]

Syzkaller reports a memory leak as follows:
====================================
BUG: memory leak
unreferenced object 0xffff88810c287f00 (size 256):
  comm "syz-executor105", pid 3600, jiffies 4294943292 (age 12.990s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff814cf9f0>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046
    [<ffffffff839c9e07>] kmalloc include/linux/slab.h:576 [inline]
    [<ffffffff839c9e07>] kmalloc_array include/linux/slab.h:627 [inline]
    [<ffffffff839c9e07>] kcalloc include/linux/slab.h:659 [inline]
    [<ffffffff839c9e07>] tcf_exts_init include/net/pkt_cls.h:250 [inline]
    [<ffffffff839c9e07>] tcindex_set_parms+0xa7/0xbe0 net/sched/cls_tcindex.c:342
    [<ffffffff839caa1f>] tcindex_change+0xdf/0x120 net/sched/cls_tcindex.c:553
    [<ffffffff8394db62>] tc_new_tfilter+0x4f2/0x1100 net/sched/cls_api.c:2147
    [<ffffffff8389e91c>] rtnetlink_rcv_msg+0x4dc/0x5d0 net/core/rtnetlink.c:6082
    [<ffffffff839eba67>] netlink_rcv_skb+0x87/0x1d0 net/netlink/af_netlink.c:2540
    [<ffffffff839eab87>] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
    [<ffffffff839eab87>] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345
    [<ffffffff839eb046>] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921
    [<ffffffff8383e796>] sock_sendmsg_nosec net/socket.c:714 [inline]
    [<ffffffff8383e796>] sock_sendmsg+0x56/0x80 net/socket.c:734
    [<ffffffff8383eb08>] ____sys_sendmsg+0x178/0x410 net/socket.c:2482
    [<ffffffff83843678>] ___sys_sendmsg+0xa8/0x110 net/socket.c:2536
    [<ffffffff838439c5>] __sys_sendmmsg+0x105/0x330 net/socket.c:2622
    [<ffffffff83843c14>] __do_sys_sendmmsg net/socket.c:2651 [inline]
    [<ffffffff83843c14>] __se_sys_sendmmsg net/socket.c:2648 [inline]
    [<ffffffff83843c14>] __x64_sys_sendmmsg+0x24/0x30 net/socket.c:2648
    [<ffffffff84605fd5>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<ffffffff84605fd5>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
    [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
====================================

Kernel uses tcindex_change() to change an existing
filter properties.

Yet the problem is that, during the process of changing,
if `old_r` is retrieved from `p->perfect`, then
kernel uses tcindex_alloc_perfect_hash() to newly
allocate filter results, uses tcindex_filter_result_init()
to clear the old filter result, without destroying
its tcf_exts structure, which triggers the above memory leak.

To be more specific, there are only two source for the `old_r`,
according to the tcindex_lookup(). `old_r` is retrieved from
`p->perfect`, or `old_r` is retrieved from `p->h`.

  * If `old_r` is retrieved from `p->perfect`, kernel uses
tcindex_alloc_perfect_hash() to newly allocate the
filter results. Then `r` is assigned with `cp->perfect + handle`,
which is newly allocated. So condition `old_r && old_r != r` is
true in this situation, and kernel uses tcindex_filter_result_init()
to clear the old filter result, without destroying
its tcf_exts structure

  * If `old_r` is retrieved from `p->h`, then `p->perfect` is NULL
according to the tcindex_lookup(). Considering that `cp->h`
is directly copied from `p->h` and `p->perfect` is NULL,
`r` is assigned with `tcindex_lookup(cp, handle)`, whose value
should be the same as `old_r`, so condition `old_r && old_r != r`
is false in this situation, kernel ignores using
tcindex_filter_result_init() to clear the old filter result.

So only when `old_r` is retrieved from `p->perfect` does kernel use
tcindex_filter_result_init() to clear the old filter result, which
triggers the above memory leak.

Considering that there already exists a tc_filter_wq workqueue
to destroy the old tcindex_data by tcindex_partial_destroy_work()
at the end of tcindex_set_parms(), this patch solves
this memory leak bug by removing this old filter result
clearing part and delegating it to the tc_filter_wq workqueue.

Note that this patch doesn't introduce any other issues. If
`old_r` is retrieved from `p->perfect`, this patch just
delegates old filter result clearing part to the
tc_filter_wq workqueue; If `old_r` is retrieved from `p->h`,
kernel doesn't reach the old filter result clearing part, so
removing this part has no effect.

[Thanks to the suggestion from Jakub Kicinski, Cong Wang, Paolo Abeni
and Dmitry Vyukov]

Fixes: b9a24bb76bf6 ("net_sched: properly handle failure case of tcf_exts_init()")
Link: https://lore.kernel.org/all/0000000000001de5c505ebc9ec59@google.com/
Reported-by: syzbot+232ebdbd36706c965ebf@syzkaller.appspotmail.com
Tested-by: syzbot+232ebdbd36706c965ebf@syzkaller.appspotmail.com
Cc: Cong Wang <cong.wang@bytedance.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix VF promisc mode not update when mac table full

[ Upstream commit 8ee57c7b8406c7aa8ca31e014440c87c6383f429 ]

Currently, it missed set HCLGE_VPORT_STATE_PROMISC_CHANGE
flag for VF when vport->overflow_promisc_flags changed.
So the VF won't check whether to update promisc mode in
this case. So add it.

Fixes: 1e6e76101fd9 ("net: hns3: configure promisc mode for VF asynchronously")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix miss L3E checking for rx packet

[ Upstream commit 7d89b53cea1a702f97117fb4361523519bb1e52c ]

For device supports RXD advanced layout, the driver will
return directly if the hardware finish the checksum
calculate. It cause missing L3E checking for ip packets.
Fixes it.

Fixes: 1ddc028ac849 ("net: hns3: refactor out RX completion checksum")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: add interrupts re-initialization while doing VF FLR

[ Upstream commit 09e6b30eeb254f1818a008cace3547159e908dfd ]

Currently keep alive message between PF and VF may be lost and the VF is
unalive in PF. So the VF will not do reset during PF FLR reset process.
This would make the allocated interrupt resources of VF invalid and VF
would't receive or respond to PF any more.

So this patch adds VF interrupts re-initialization during VF FLR for VF
recovery in above cases.

Fixes: 862d969a3a4d ("net: hns3: do VF's pci re-initialization while PF doing FLR")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: shut down the NFSv4 state objects before the filecache

[ Upstream commit 789e1e10f214c00ca18fc6610824c5b9876ba5f2 ]

Currently, we shut down the filecache before trying to clean up the
stateids that depend on it. This leads to the kernel trying to free an
nfsd_file twice, and a refcount overput on the nf_mark.

Change the shutdown procedure to tear down all of the stateids prior
to shutting down the filecache.

Reported-and-tested-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Fixes: 5e113224c17e ("nfsd: nfsd_file cache entries should be per net namespace")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

veth: Fix race with AF_XDP exposing old or uninitialized descriptors

[ Upstream commit fa349e396e4886d742fd6501c599ec627ef1353b ]

When AF_XDP is used on on a veth interface the RX ring is updated in two
steps.  veth_xdp_rcv() removes packet descriptors from the FILL ring
fills them and places them in the RX ring updating the cached_prod
pointer.  Later xdp_do_flush() syncs the RX ring prod pointer with the
cached_prod pointer allowing user-space to see the recently filled in
descriptors.  The rings are intended to be SPSC, however the existing
order in veth_poll allows the xdp_do_flush() to run concurrently with
another CPU creating a race condition that allows user-space to see old
or uninitialized descriptors in the RX ring.  This bug has been observed
in production systems.

To summarize, we are expecting this ordering:

CPU 0 __xsk_rcv_zc()
CPU 0 __xsk_map_flush()
CPU 2 __xsk_rcv_zc()
CPU 2 __xsk_map_flush()

But we are seeing this order:

CPU 0 __xsk_rcv_zc()
CPU 2 __xsk_rcv_zc()
CPU 0 __xsk_map_flush()
CPU 2 __xsk_map_flush()

This occurs because we rely on NAPI to ensure that only one napi_poll
handler is running at a time for the given veth receive queue.
napi_schedule_prep() will prevent multiple instances from getting
scheduled. However calling napi_complete_done() signals that this
napi_poll is complete and allows subsequent calls to
napi_schedule_prep() and __napi_schedule() to succeed in scheduling a
concurrent napi_poll before the xdp_do_flush() has been called.  For the
veth driver a concurrent call to napi_schedule_prep() and
__napi_schedule() can occur on a different CPU because the veth xmit
path can additionally schedule a napi_poll creating the race.

The fix as suggested by Magnus Karlsson, is to simply move the
xdp_do_flush() call before napi_complete_done().  This syncs the
producer ring pointers before another instance of napi_poll can be
scheduled on another CPU.  It will also slightly improve performance by
moving the flush closer to when the descriptors were placed in the
RX ring.

Fixes: d1396004dd86 ("veth: Add XDP TX and REDIRECT")
Suggested-by: Magnus Karlsson <magnus.karlsson@gmail.com>
Signed-off-by: Shawn Bohrer <sbohrer@cloudflare.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lan966x: Fix configuration of the PCS

[ Upstream commit d717f9474e3fb7e6bd3e43ca16e131f04320ed6f ]

When the PCS was taken out of reset, we were changing by mistake also
the speed to 100 Mbit. But in case the link was going down, the link
up routine was setting correctly the link speed. If the link was not
getting down then the speed was forced to run at 100 even if the
speed was something else.
On lan966x, to set the speed link to 1G or 2.5G a value of 1 needs to be
written in DEV_CLOCK_CFG_LINK_SPEED. This is similar to the procedure in
lan966x_port_init.

The issue was reproduced using 1000base-x sfp module using the commands:
ip link set dev eth2 up
ip link addr add 10.97.10.2/24 dev eth2
ethtool -s eth2 speed 1000 autoneg off

Fixes: d28d6d2e37d1 ("net: lan966x: add port module support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Link: https://lore.kernel.org/r/20221221093315.939133-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>