nohz: Fix missing tick reprogram when interrupting an inline softirq

commit 0a0e0829f990120cef165bbb804237f400953ec2 upstream.

The full nohz tick is reprogrammed in irq_exit() only if the exit is not in
a nesting interrupt. This stands as an optimization: whether a hardirq or a
softirq is interrupted, the tick is going to be reprogrammed when necessary
at the end of the inner interrupt, with even potential new updates on the
timer queue.

When soft interrupts are interrupted, it's assumed that they are executing
on the tail of an interrupt return. In that case tick_nohz_irq_exit() is
called after softirq processing to take care of the tick reprogramming.

But the assumption is wrong: softirqs can be processed inline as well, ie:
outside of an interrupt, like in a call to local_bh_enable() or from
ksoftirqd.

Inline softirqs don't reprogram the tick once they are done, as opposed to
interrupt tail softirq processing. So if a tick interrupts an inline
softirq processing, the next timer will neither be reprogrammed from the
interrupting tick's irq_exit() nor after the interrupted softirq
processing. This situation may leave the tick unprogrammed while timers are
armed.

To fix this, simply keep reprogramming the tick even if a softirq has been
interrupted. That can be optimized further, but for now correctness is more
important.

Note that new timers enqueued in nohz_full mode after a softirq gets
interrupted will still be handled just fine through self-IPIs triggered by
the timer code.

Reported-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: stable@vger.kernel.org # 4.14+
Link: https://lkml.kernel.org/r/1533303094-15855-1-git-send-email-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nohz: Fix local_timer_softirq_pending()

commit 80d20d35af1edd632a5e7a3b9c0ab7ceff92769e upstream.

local_timer_softirq_pending() checks whether the timer softirq is
pending with: local_softirq_pending() & TIMER_SOFTIRQ.

This is wrong because TIMER_SOFTIRQ is the softirq number and not a
bitmask. So the test checks for the wrong bit.

Use BIT(TIMER_SOFTIRQ) instead.

Fixes: 5d62c183f9e9 ("nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()")
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: bigeasy@linutronix.de
Cc: peterz@infradead.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180731161358.29472-1-anna-maria@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq: Make force irq threading setup more robust

commit d1f0301b3333eef5efbfa1fe0f0edbea01863d5d upstream.

The support of force threading interrupts which are set up with both a
primary and a threaded handler wreckaged the setup of regular requested
threaded interrupts (primary handler == NULL).

The reason is that it does not check whether the primary handler is set to
the default handler which wakes the handler thread. Instead it replaces the
thread handler with the primary handler as it would do with force threaded
interrupts which have been requested via request_irq(). So both the primary
and the thread handler become the same which then triggers the warnon that
the thread handler tries to wakeup a not configured secondary thread.

Fortunately this only happens when the driver omits the IRQF_ONESHOT flag
when requesting the threaded interrupt, which is normaly caught by the
sanity checks when force irq threading is disabled.

Fix it by skipping the force threading setup when a regular threaded
interrupt is requested. As a consequence the interrupt request which lacks
the IRQ_ONESHOT flag is rejected correctly instead of silently wreckaging
it.

Fixes: 2a1d3ab8986d ("genirq: Handle force threading of irqs with primary and thread handler")
Reported-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Return error when TMF returns

commit b4146c4929ef61d5afca011474d59d0918a0cd82 upstream.

Propagate the task management completion status properly to avoid
unnecessary waits for commands to complete.

Fixes: faef62d13463 ("[SCSI] qla2xxx: Fix Task Management command asynchronous handling")
Cc: <stable@vger.kernel.org>
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix ISP recovery on unload

commit b08abbd9f5996309f021684f9ca74da30dcca36a upstream.

During unload process, the chip can encounter problem where a FW dump would
be captured. For this case, the full reset sequence will be skip to bring
the chip back to full operational state.

Fixes: e315cd28b9ef ("[SCSI] qla2xxx: Code changes for qla data structure refactoring")
Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix NPIV deletion by calling wait_for_sess_deletion

commit efa93f48fa9d423fda166bc3b6c0cbb09682492e upstream.

Add wait for session deletion to finish before freeing an NPIV scsi host.

Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix unintialized List head crash

commit e3dde080ebbdbb4bda8eee35d770714fee8c59ac upstream.

In case of IOCB Queue full or system where memory is low and driver
receives large number of RSCN storm, the stale sp pointer can stay on
gpnid_list resulting in page_fault.

This patch fixes this issue by initializing the sp->elem list head and
removing sp->elem before memory is freed.

Following stack trace is seen

 9 [ffff987b37d1bc60] page_fault at ffffffffad516768 [exception RIP: qla24xx_async_gpnid+496]
10 [ffff987b37d1bd10] qla24xx_async_gpnid at ffffffffc039866d [qla2xxx]
11 [ffff987b37d1bd80] qla2x00_do_work at ffffffffc036169c [qla2xxx]
12 [ffff987b37d1be38] qla2x00_do_dpc_all_vps at ffffffffc03adfed [qla2xxx]
13 [ffff987b37d1be78] qla2x00_do_dpc at ffffffffc036458a [qla2xxx]
14 [ffff987b37d1bec8] kthread at ffffffffacebae31

Fixes: 2d73ac6102d9 ("scsi: qla2xxx: Serialize GPNID for multiple RSCN")
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.61

scsi: sg: fix minor memory leak in error path

commit c170e5a8d222537e98aa8d4fddb667ff7a2ee114 upstream.

Fix a minor memory leak when there is an error opening a /dev/sg device.

Fixes: cc833acbee9d ("sg: O_EXCL and other lock handling")
Cc: <stable@vger.kernel.org>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: Reset ->{x, y}_scaling[1] when dealing with uniplanar formats

commit a6a00918d4ad8718c3ccde38c02cec17f116b2fd upstream.

This is needed to ensure ->is_unity is correct when the plane was
previously configured to output a multi-planar format with scaling
enabled, and is then being reconfigured to output a uniplanar format.

Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180724133601.32114-1-boris.brezillon@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: padlock-aes - Fix Nano workaround data corruption

commit 46d8c4b28652d35dc6cfb5adf7f54e102fc04384 upstream.

This was detected by the self-test thanks to Ard's chunking patch.

I finally got around to testing this out on my ancient Via box.  It
turns out that the workaround got the assembly wrong and we end up
doing count + initial cycles of the loop instead of just count.

This obviously causes corruption, either by overwriting the source
that is yet to be processed, or writing over the end of the buffer.

On CPUs that don't require the workaround only ECB is affected.
On Nano CPUs both ECB and CBC are affected.

This patch fixes it by doing the subtraction prior to the assembly.

Fixes: a76c1c23d0c3 ("crypto: padlock-aes - work around Nano CPU...")
Cc: <stable@vger.kernel.org>
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/uverbs: Expand primary and alt AV port checks

commit addb8a6559f0f8b5a37582b7ca698358445a55bf upstream.

The commit cited below checked that the port numbers provided in the
primary and alt AVs are legal.

That is sufficient to prevent a kernel panic. However, it is not
sufficient for correct operation.

In Linux, AVs (both primary and alt) must be completely self-described.
We do not accept an AV from userspace without an embedded port number.
(This has been the case since kernel 3.14 commit dbf727de7440
("IB/core: Use GID table in AH creation and dmac resolution")).

For the primary AV, this embedded port number must match the port number
specified with IB_QP_PORT.

We also expect the port number embedded in the alt AV to match the
alt_port_num value passed by the userspace driver in the modify_qp command
base structure.

Add these checks to modify_qp.

Cc: <stable@vger.kernel.org> # 4.16
Fixes: 5d4c05c3ee36 ("RDMA/uverbs: Sanitize user entered port numbers prior to access it")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: add more card IDs for 9000 series

commit 0a5257bc6d89c2ae69b9bf955679cb4f89261874 upstream.

Add new device IDs for the 9000 series.

Cc: stable@vger.kernel.org # 4.14
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

userfaultfd: remove uffd flags from vma->vm_flags if UFFD_EVENT_FORK fails

commit 31e810aa1033a7db50a2746cd34a2432237f6420 upstream.

The fix in commit 0cbb4b4f4c44 ("userfaultfd: clear the
vma->vm_userfaultfd_ctx if UFFD_EVENT_FORK fails") cleared the
vma->vm_userfaultfd_ctx but kept userfaultfd flags in vma->vm_flags
that were copied from the parent process VMA.

As the result, there is an inconsistency between the values of
vma->vm_userfaultfd_ctx.ctx and vma->vm_flags which triggers BUG_ON
in userfaultfd_release().

Clearing the uffd flags from vma->vm_flags in case of UFFD_EVENT_FORK
failure resolves the issue.

Link: http://lkml.kernel.org/r/1532931975-25473-1-git-send-email-rppt@linux.vnet.ibm.com
Fixes: 0cbb4b4f4c44 ("userfaultfd: clear the vma->vm_userfaultfd_ctx if UFFD_EVENT_FORK fails")
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Reported-by: syzbot+121be635a7a35ddb7dcb@syzkaller.appspotmail.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: fix potential null dereference 'context->module.name'

commit b305f7ed0f4f494ad6f3ef5667501535d5a8fa31 upstream.

The variable 'context->module.name' may be null pointer when
kmalloc return null, so it's better to check it before using
to avoid null dereference.
Another one more thing this patch does is using kstrdup instead
of (kmalloc + strcpy), and signal a lost record via audit_log_lost.

Cc: stable@vger.kernel.org # 4.11
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: x86: vmx: fix vpid leak

commit 63aff65573d73eb8dda4732ad4ef222dd35e4862 upstream.

VPID for the nested vcpu is allocated at vmx_create_vcpu whenever nested
vmx is turned on with the module parameter.

However, it's only freed if the L1 guest has executed VMXON which is not
a given.

As a result, on a system with nested==on every creation+deletion of an
L1 vcpu without running an L2 guest results in leaking one vpid.  Since
the total number of vpids is limited to 64k, they can eventually get
exhausted, preventing L2 from starting.

Delay allocation of the L2 vpid until VMXON emulation, thus matching its
freeing.

Fixes: 5c614b3583e7b6dab0c86356fa36c2bcbb8322a0
Cc: stable@vger.kernel.org
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Remove %ebx handling from error_entry/exit

commit b3681dd548d06deb2e1573890829dff4b15abf46 upstream.

error_entry and error_exit communicate the user vs. kernel status of
the frame using %ebx.  This is unnecessary -- the information is in
regs->cs.  Just use regs->cs.

This makes error_entry simpler and makes error_exit more robust.

It also fixes a nasty bug.  Before all the Spectre nonsense, the
xen_failsafe_callback entry point returned like this:

        ALLOC_PT_GPREGS_ON_STACK
        SAVE_C_REGS
        SAVE_EXTRA_REGS
        ENCODE_FRAME_POINTER
        jmp     error_exit

And it did not go through error_entry.  This was bogus: RBX
contained garbage, and error_exit expected a flag in RBX.

Fortunately, it generally contained *nonzero* garbage, so the
correct code path was used.  As part of the Spectre fixes, code was
added to clear RBX to mitigate certain speculation attacks.  Now,
depending on kernel configuration, RBX got zeroed and, when running
some Wine workloads, the kernel crashes.  This was introduced by:

    commit 3ac6d8c787b8 ("x86/entry/64: Clear registers for exceptions/interrupts, to reduce speculation attack surface")

With this patch applied, RBX is no longer needed as a flag, and the
problem goes away.

I suspect that malicious userspace could use this bug to crash the
kernel even without the offending patch applied, though.

[ Historical note: I wrote this patch as a cleanup before I was aware
  of the bug it fixed. ]

[ Note to stable maintainers: this should probably get applied to all
  kernels.  If you're nervous about that, a more conservative fix to
  add xorl %ebx,%ebx; incl %ebx before the jump to error_exit should
  also fix the problem. ]

Reported-and-tested-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Fixes: 3ac6d8c787b8 ("x86/entry/64: Clear registers for exceptions/interrupts, to reduce speculation attack surface")
Link: http://lkml.kernel.org/r/b5010a090d3586b2d6e06c7ad3ec5542d1241c45.1532282627.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/apic: Future-proof the TSC_DEADLINE quirk for SKX

commit d9e6dbcf28f383bf08e6a3180972f5722e514a54 upstream.

All SKX with stepping higher than 4 support the TSC_DEADLINE,
no matter the microcode version.

Without this patch, upcoming SKX steppings will not be able to use
their TSC_DEADLINE timer.

Signed-off-by: Len Brown <len.brown@intel.com>
Cc: <stable@kernel.org> # v4.14+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 616dd5872e ("x86/apic: Update TSC_DEADLINE quirk with additional SKX stepping")
Link: http://lkml.kernel.org/r/d0c7129e509660be9ec6b233284b8d42d90659e8.1532207856.git.len.brown@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_balloon: fix another race between migration and ballooning

commit 89da619bc18d79bca5304724c11d4ba3b67ce2c6 upstream.

Kernel panic when with high memory pressure, calltrace looks like,

PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java"
 #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb
 #1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942
 #2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30
 #3 [ffff881ec7ed7778] oops_end at ffffffff816902c8
 #4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46
 #5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc
 #6 [ffff881ec7ed7838] __node_set at ffffffff81680300
 #7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f
 #8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5
 #9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8
    [exception RIP: _raw_spin_lock_irqsave+47]
    RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046
    RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8
    RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008
    RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098
    R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000
    R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0
    ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018

It happens in the pagefault and results in double pagefault
during compacting pages when memory allocation fails.

Analysed the vmcore, the page leads to second pagefault is corrupted
with _mapcount=-256, but private=0.

It's caused by the race between migration and ballooning, and lock
missing in virtballoon_migratepage() of virtio_balloon driver.
This patch fix the bug.

Fixes: e22504296d4f64f ("virtio_balloon: introduce migration primitives to balloon pages")
Cc: stable@vger.kernel.org
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Huang Chong <huang.chong@zte.com.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: socket: fix potential spectre v1 gadget in socketcall

commit c8e8cd579bb4265651df8223730105341e61a2d1 upstream.

'call' is a user-controlled value, so sanitize the array index after the
bounds check to avoid speculating past the bounds of the 'nargs' array.

Found with the help of Smatch:

net/socket.c:2508 __do_sys_socketcall() warn: potential spectre issue
'nargs' [r] (local cap)

Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: ems_usb: Fix memory leak on ems_usb_disconnect()

commit 72c05f32f4a5055c9c8fe889bb6903ec959c0aad upstream.

ems_usb_probe() allocates memory for dev->tx_msg_buffer, but there
is no its deallocation in ems_usb_disconnect().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

squashfs: more metadata hardenings

commit 71755ee5350b63fb1f283de8561cdb61b47f4d1d upstream.

The squashfs fragment reading code doesn't actually verify that the
fragment is inside the fragment table.  The end result _is_ verified to
be inside the image when actually reading the fragment data, but before
that is done, we may end up taking a page fault because the fragment
table itself might not even exist.

Another report from Anatoly and his endless squashfs image fuzzing.

Reported-by: Анатолий Тросиненко <anatoly.trosinenko@gmail.com>
Acked-by:: Phillip Lougher <phillip.lougher@gmail.com>,
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

squashfs: more metadata hardening

commit d512584780d3e6a7cacb2f482834849453d444a1 upstream.

Anatoly reports another squashfs fuzzing issue, where the decompression
parameters themselves are in a compressed block.

This causes squashfs_read_data() to be called in order to read the
decompression options before the decompression stream having been set
up, making squashfs go sideways.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Acked-by: Phillip Lougher <phillip.lougher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager

[ Upstream commit 5f5991f36dce1e69dd8bd7495763eec2e28f08e7 ]

Execute mlx5_eswitch_init() only if we have MLX5_ESWITCH_MANAGER
capabilities.
Do the same for mlx5_eswitch_cleanup().

Fixes: a9f7705ffd66 ("net/mlx5: Unify vport manager capability check")
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix user call ID check in rxrpc_service_prealloc_one

[ Upstream commit c01f6c9b3207e52fc9973a066a856ddf7a0538d8 ]

There just check the user call ID isn't already in use, hence should
compare user_call_ID with xcall->user_call_ID, which is current
node's user_call_ID.

Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: Fix WoL for PCI-based setups

[ Upstream commit b7d0f08e9129c45ed41bc0cfa8e77067881e45fd ]

WoL won't work in PCI-based setups because we are not saving the PCI EP
state before entering suspend state and not allowing D3 wake.

Fix this by using a wrapper around stmmac_{suspend/resume} which
correctly sets the PCI EP state.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: Fix spectre v1 gadget in netlink_create()

[ Upstream commit bc5b6c0b62b932626a135f516a41838c510c6eba ]

'protocol' is a user-controlled value, so sanitize it after the bounds
check to avoid using it for speculative out-of-bounds access to arrays
indexed by it.

This addresses the following accesses detected with the help of smatch:

* net/netlink/af_netlink.c:654 __netlink_create() warn: potential
  spectre issue 'nlk_cb_mutex_keys' [w]

* net/netlink/af_netlink.c:654 __netlink_create() warn: potential
  spectre issue 'nlk_cb_mutex_key_strings' [w]

* net/netlink/af_netlink.c:685 netlink_create() warn: potential spectre
  issue 'nl_table' [w] (local cap)

Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: Do not suspend/resume closed slave_dev

[ Upstream commit a94c689e6c9e72e722f28339e12dff191ee5a265 ]

If a DSA slave network device was previously disabled, there is no need
to suspend or resume it.

Fixes: 2446254915a7 ("net: dsa: allow switch drivers to implement suspend/resume hooks")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: frags: handle possible skb truesize change

[ Upstream commit 4672694bd4f1aebdab0ad763ae4716e89cb15221 ]

ip_frag_queue() might call pskb_pull() on one skb that
is already in the fragment queue.

We need to take care of possible truesize change, or we
might have an imbalance of the netns frags memory usage.

IPv6 is immune to this bug, because RFC5722, Section 4,
amended by Errata ID 3089 states :

  When reassembling an IPv6 datagram, if
  one or more its constituent fragments is determined to be an
  overlapping fragment, the entire datagram (and any constituent
  fragments) MUST be silently discarded.

Fixes: 158f323b9868 ("net: adjust skb->truesize in pskb_expand_head()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frag: enforce memory limits earlier

[ Upstream commit 56e2c94f055d328f5f6b0a5c1721cca2f2d4e0a1 ]

We currently check current frags memory usage only when
a new frag queue is created. This allows attackers to first
consume the memory budget (default : 4 MB) creating thousands
of frag queues, then sending tiny skbs to exceed high_thresh
limit by 2 to 3 order of magnitude.

Note that before commit 648700f76b03 ("inet: frags: use rhashtables
for reassembly units"), work queue could be starved under DOS,
getting no cpu cycles.
After commit 648700f76b03, only the per frag queue timer can eventually
remove an incomplete frag queue and its skbs.

Fixes: b13d3cbfb8e8 ("inet: frag: move eviction of queues to work queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Peter Oskolkov <posk@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: avoid lockdep confusion in bond_get_stats()

[ Upstream commit 7e2556e40026a1b0c16f37446ab398d5a5a892e4 ]

syzbot found that the following sequence produces a LOCKDEP splat [1]

ip link add bond10 type bond
ip link add bond11 type bond
ip link set bond11 master bond10

To fix this, we can use the already provided nest_level.

This patch also provides correct nesting for dev->addr_list_lock

[1]
WARNING: possible recursive locking detected
4.18.0-rc6+ #167 Not tainted
--------------------------------------------
syz-executor751/4439 is trying to acquire lock:
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline]
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426

but task is already holding lock:
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline]
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&bond->stats_lock)->rlock);
  lock(&(&bond->stats_lock)->rlock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by syz-executor751/4439:
 #0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77
 #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline]
 #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426
 #2: (____ptrval____) (rcu_read_lock){....}, at: bond_get_stats+0x0/0x560 include/linux/compiler.h:215

stack backtrace:
CPU: 0 PID: 4439 Comm: syz-executor751 Not tainted 4.18.0-rc6+ #167
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
 print_deadlock_bug kernel/locking/lockdep.c:1765 [inline]
 check_deadlock kernel/locking/lockdep.c:1809 [inline]
 validate_chain kernel/locking/lockdep.c:2405 [inline]
 __lock_acquire.cold.64+0x1fb/0x486 kernel/locking/lockdep.c:3435
 lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:144
 spin_lock include/linux/spinlock.h:310 [inline]
 bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426
 dev_get_stats+0x10f/0x470 net/core/dev.c:8316
 bond_get_stats+0x232/0x560 drivers/net/bonding/bond_main.c:3432
 dev_get_stats+0x10f/0x470 net/core/dev.c:8316
 rtnl_fill_stats+0x4d/0xac0 net/core/rtnetlink.c:1169
 rtnl_fill_ifinfo+0x1aa6/0x3fb0 net/core/rtnetlink.c:1611
 rtmsg_ifinfo_build_skb+0xc8/0x190 net/core/rtnetlink.c:3268
 rtmsg_ifinfo_event.part.30+0x45/0xe0 net/core/rtnetlink.c:3300
 rtmsg_ifinfo_event net/core/rtnetlink.c:3297 [inline]
 rtnetlink_event+0x144/0x170 net/core/rtnetlink.c:4716
 notifier_call_chain+0x180/0x390 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1735
 call_netdevice_notifiers net/core/dev.c:1753 [inline]
 netdev_features_change net/core/dev.c:1321 [inline]
 netdev_change_features+0xb3/0x110 net/core/dev.c:7759
 bond_compute_features.isra.47+0x585/0xa50 drivers/net/bonding/bond_main.c:1120
 bond_enslave+0x1b25/0x5da0 drivers/net/bonding/bond_main.c:1755
 bond_do_ioctl+0x7cb/0xae0 drivers/net/bonding/bond_main.c:3528
 dev_ifsioc+0x43c/0xb30 net/core/dev_ioctl.c:327
 dev_ioctl+0x1b5/0xcc0 net/core/dev_ioctl.c:493
 sock_do_ioctl+0x1d3/0x3e0 net/socket.c:992
 sock_ioctl+0x30d/0x680 net/socket.c:1093
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:500 [inline]
 do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:684
 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
 __do_sys_ioctl fs/ioctl.c:708 [inline]
 __se_sys_ioctl fs/ioctl.c:706 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440859
Code: e8 2c af 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc51a92878 EFLAGS: 00000213 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440859
RDX: 0000000020000040 RSI: 0000000000008990 RDI: 0000000000000003
RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000022d5880 R11: 0000000000000213 R12: 0000000000007390
R13: 0000000000401db0 R14: 0000000000000000 R15: 0000000000000000

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.60

tcp: add one more quick ack after after ECN events

[ Upstream commit 15ecbe94a45ef88491ca459b26efdd02f91edb6d ]

Larry Brakmo proposal ( https://patchwork.ozlabs.org/patch/935233/
tcp: force cwnd at least 2 in tcp_cwnd_reduction) made us rethink
about our recent patch removing ~16 quick acks after ECN events.

tcp_enter_quickack_mode(sk, 1) makes sure one immediate ack is sent,
but in the case the sender cwnd was lowered to 1, we do not want
to have a delayed ack for the next packet we will receive.

Fixes: 522040ea5fdd ("tcp: do not aggressively quick ack after ECN events")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Neal Cardwell <ncardwell@google.com>
Cc: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: refactor tcp_ecn_check_ce to remove sk type cast

[ Upstream commit f4c9f85f3b2cb7669830cd04d0be61192a4d2436 ]

Refactor tcp_ecn_check_ce and __tcp_ecn_check_ce to accept struct sock*
instead of tcp_sock* to clean up type casts. This is a pure refactor
patch.

Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: do not aggressively quick ack after ECN events

[ Upstream commit 522040ea5fdd1c33bbf75e1d7c7c0422b96a94ef ]

ECN signals currently forces TCP to enter quickack mode for
up to 16 (TCP_MAX_QUICKACKS) following incoming packets.

We believe this is not needed, and only sending one immediate ack
for the current packet should be enough.

This should reduce the extra load noticed in DCTCP environments,
after congestion events.

This is part 2 of our effort to reduce pure ACK packets.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: add max_quickacks param to tcp_incr_quickack and tcp_enter_quickack_mode

[ Upstream commit 9a9c9b51e54618861420093ae6e9b50a961914c5 ]

We want to add finer control of the number of ACK packets sent after
ECN events.

This patch is not changing current behavior, it only enables following
change.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: do not force quickack when receiving out-of-order packets

[ Upstream commit a3893637e1eb0ef5eb1bbc52b3a8d2dfa317a35d ]

As explained in commit 9f9843a751d0 ("tcp: properly handle stretch
acks in slow start"), TCP stacks have to consider how many packets
are acknowledged in one single ACK, because of GRO, but also
because of ACK compression or losses.

We plan to add SACK compression in the following patch, we
must therefore not call tcp_enter_quickack_mode()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: Don't shift with UB on nlk->ngroups

[ Upstream commit 61f4b23769f0cc72ae62c9a81cf08f0397d40da8 ]

On i386 nlk->ngroups might be 32 or 0. Which leads to UB, resulting in
hang during boot.
Check for 0 ngroups and use (unsigned long long) as a type to shift.

Fixes: 7acf9d4237c4 ("netlink: Do not subscribe to non-existent groups").
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: Do not subscribe to non-existent groups

[ Upstream commit 7acf9d4237c46894e0fa0492dd96314a41742e84 ]

Make ABI more strict about subscribing to group > ngroups.
Code doesn't check for that and it looks bogus.
(one can subscribe to non-existing group)
Still, it's possible to bind() to all possible groups with (-1)

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-netfront: wait xenbus state change when load module manually

[ Upstream commit 822fb18a82abaf4ee7058793d95d340f5dab7bfc ]

When loading module manually, after call xenbus_switch_state to initializes
the state of the netfront device, the driver state did not change so fast
that may lead no dev created in latest kernel. This patch adds wait to make
sure xenbus knows the driver is not in closed/unknown state.

Current state:
[vm]# ethtool eth0
Settings for eth0:
Link detected: yes
[vm]# modprobe -r xen_netfront
[vm]# modprobe  xen_netfront
[vm]# ethtool eth0
Settings for eth0:
Cannot get device settings: No such device
Cannot get wake-on-lan settings: No such device
Cannot get message level: No such device
Cannot get link status: No such device
No data available

With the patch installed.
[vm]# ethtool eth0
Settings for eth0:
Link detected: yes
[vm]# modprobe -r xen_netfront
[vm]# modprobe xen_netfront
[vm]# ethtool eth0
Settings for eth0:
Link detected: yes

Signed-off-by: Xiao Liang <xiliang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp_bbr: fix bw probing to raise in-flight data for very small BDPs

[ Upstream commit 383d470936c05554219094a4d364d964cb324827 ]

For some very small BDPs (with just a few packets) there was a
quantization effect where the target number of packets in flight
during the super-unity-gain (1.25x) phase of gain cycling was
implicitly truncated to a number of packets no larger than the normal
unity-gain (1.0x) phase of gain cycling. This meant that in multi-flow
scenarios some flows could get stuck with a lower bandwidth, because
they did not push enough packets inflight to discover that there was
more bandwidth available. This was really only an issue in multi-flow
LAN scenarios, where RTTs and BDPs are low enough for this to be an
issue.

This fix ensures that gain cycling can raise inflight for small BDPs
by ensuring that in PROBE_BW mode target inflight values with a
super-unity gain are always greater than inflight values with a gain
<= 1. Importantly, this applies whether the inflight value is
calculated for use as a cwnd value, or as a target inflight value for
the end of the super-unity phase in bbr_is_next_cycle_phase() (both
need to be bigger to ensure we can probe with more packets in flight
reliably).

This is a candidate fix for stable releases.

Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Priyaranjan Jha <priyarjha@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NET: stmmac: align DMA stuff to largest cache line length

[ Upstream commit 9939a46d90c6c76f4533d534dbadfa7b39dc6acc ]

As for today STMMAC_ALIGN macro (which is used to align DMA stuff)
relies on L1 line length (L1_CACHE_BYTES).
This isn't correct in case of system with several cache levels
which might have L1 cache line length smaller than L2 line. This
can lead to sharing one cache line between DMA buffer and other
data, so we can lose this data while invalidate DMA buffer before
DMA transaction.

Fix that by using SMP_CACHE_BYTES instead of L1_CACHE_BYTES for
aligning.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mdio-mux: bcm-iproc: fix wrong getter and setter pair

[ Upstream commit b0753408aadf32c7ece9e6b765017881e54af833 ]

mdio_mux_iproc_probe() uses platform_set_drvdata() to store md pointer
in device, whereas mdio_mux_iproc_remove() restores md pointer by
dev_get_platdata(&pdev->dev). This leads to wrong resources release.

The patch replaces getter to platform_get_drvdata.

Fixes: 98bc865a1ec8 ("net: mdio-mux: Add MDIO mux driver for iProc SoCs")
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: lan78xx: fix rx handling before first packet is send

[ Upstream commit 136f55f660192ce04af091642efc75d85e017364 ]

As long the bh tasklet isn't scheduled once, no packet from the rx path
will be handled. Since the tx path also schedule the same tasklet
this situation only persits until the first packet transmission.
So fix this issue by scheduling the tasklet after link reset.

Link: https://github.com/raspberrypi/linux/issues/2617
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet")
Suggested-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix amd-xgbe flow-control issue

[ Upstream commit 7f3fc7ddf719cd6faaf787722c511f6918ac6aab ]

If we enable or disable xgbe flow-control by ethtool ,
it does't work.Because the parameter is not properly
assigned,so we need to adjust the assignment order
of the parameters.

Fixes: c1ce2f77366b ("amd-xgbe: Fix flow control setting logic")
Signed-off-by: tangpengpeng <tangpengpeng@higon.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ena: Fix use of uninitialized DMA address bits field

[ Upstream commit 101f0cd4f2216d32f1b8a75a2154cf3997484ee2 ]

UBSAN triggers the following undefined behaviour warnings:
[...]
[   13.236124] UBSAN: Undefined behaviour in drivers/net/ethernet/amazon/ena/ena_eth_com.c:468:22
[   13.240043] shift exponent 64 is too large for 64-bit type 'long long unsigned int'
[...]
[   13.744769] UBSAN: Undefined behaviour in drivers/net/ethernet/amazon/ena/ena_eth_com.c:373:4
[   13.748694] shift exponent 64 is too large for 64-bit type 'long long unsigned int'
[...]

When splitting the address to high and low, GENMASK_ULL is used to generate
a bitmask with dma_addr_bits field from io_sq (in ena_com_prepare_tx and
ena_com_add_single_rx_desc).
The problem is that dma_addr_bits is not initialized with a proper value
(besides being cleared in ena_com_create_io_queue).
Assign dma_addr_bits the correct value that is stored in ena_dev when
initializing the SQ.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Gal Pressman <pressmangal@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: remove BUG_ON() from fib_compute_spec_dst

[ Upstream commit 9fc12023d6f51551d6ca9ed7e02ecc19d79caf17 ]

Remove BUG_ON() from fib_compute_spec_dst routine and check
in_dev pointer during flowi4 data structure initialization.
fib_compute_spec_dst routine can be run concurrently with device removal
where ip_ptr net_device pointer is set to NULL. This can happen
if userspace enables pkt info on UDP rx socket and the device
is removed while traffic is flowing

Fixes: 35ebf65e851c ("ipv4: Create and use fib_compute_spec_dst() helper")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: qca8k: Allow overwriting CPU port setting

commit 9bb2289f90e671bdb78e306974187424ac19ff8e upstream.

Implement adjust_link function that allows to overwrite default CPU port
setting using fixed-link device tree subnode.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: qca8k: Add QCA8334 binding documentation

commit 218bbea11a777c156eb7bcbdc72867b32ae10985 upstream.

Add support for the four-port variant of the Qualcomm QCA833x switch.

The CPU port default link settings can be reconfigured using
a fixed-link sub-node.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: qca8k: Enable RXMAC when bringing up a port

commit eee1fe64765c562d8bcaf95e5631a8ea2f760f34 upstream.

When a port is brought up/down do not enable/disable only the TXMAC
but the RXMAC as well. This is essential for the CPU port to work.

Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: qca8k: Force CPU port to its highest bandwidth

commit 79a4ed4f0f93fc65e48a0fc5247ffa5645f7b0cc upstream.

By default autonegotiation is enabled to configure MAC on all ports.
For the CPU port autonegotiation can not be used so we need to set
some sensible defaults manually.

This patch forces the default setting of the CPU port to 1000Mbps/full
duplex which is the chip maximum capability.

Also correct size of the bit field used to configure link speed.

Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/uverbs: Protect from attempts to create flows on unsupported QP

commit 940efcc8889f0d15567eb07fc9fd69b06e366aa5 upstream.

Flows can be created on UD and RAW_PACKET QP types. Attempts to provide
other QP types as an input causes to various unpredictable failures.

The reason is that in order to support all various types (e.g. XRC), we
are supposed to use real_qp handle and not qp handle and expect to
driver/FW to fail such (XRC) flows. The simpler and safer variant is to
ban all QP types except UD and RAW_PACKET, instead of relying on
driver/FW.

Cc: <stable@vger.kernel.org> # 3.11
Fixes: 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs")
Cc: syzkaller <syzkaller@googlegroups.com>
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: renesas_usb3: should remove debugfs

commit 1990cf7c21ea185cec98c6d45a82c04481261e35 upstream.

This patch fixes an issue that this driver doesn't remove its debugfs.

Fixes: 43ba968b00ea ("usb: gadget: udc: renesas_usb3: add debugfs to set the b-device mode")
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: Sync upper dirty data when syncing overlayfs

commit e8d4bfe3a71537284a90561f77c85dea6c154369 upstream.

When executing filesystem sync or umount on overlayfs,
dirty data does not get synced as expected on upper filesystem.
This patch fixes sync filesystem method to keep data consistency
for overlayfs.

Signed-off-by: Chengguang Xu <cgxu@mykernel.net>
Fixes: e593b2bf513d ("ovl: properly implement sync_filesystem()")
Cc: <stable@vger.kernel.org> #4.11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: xgene: Remove leftover pci_scan_child_bus() call

commit 94b9d290b753cbbc87971ee134511245f5872a83 upstream.

The changes in commit 9af275be15f7 ("PCI: xgene: Convert PCI scan API to
pci_scan_root_bus_bridge()") converted the xgene PCI host driver to
the new pci_scan_root_bus_bridge() bus scanning API but erroneously left
the existing pci_scan_child_bus() call in place which resulted in duplicate
PCI bus enumerations.

Remove the leftover pci_scan_child_bus() call to properly complete the API
conversion.

Fixes: 9af275be15f7 ("PCI: xgene: Convert PCI scan API to pci_scan_root_bus_bridge()")
Tested-by: Khuong Dinh <kdinh@apm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: <stable@vger.kernel.org> # 4.13+
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: pciehp: Assume NoCompl+ for Thunderbolt ports

commit 493fb50e958c1c6deef7feff0b8c3855def78d75 upstream.

Certain Thunderbolt 1 controllers claim to support Command Completed events
(value of 0b in the No Command Completed Support field of the Slot
Capabilities register) but in reality they neither set the Command
Completed bit in the Slot Status register nor signal a Command Completed
interrupt:

  8086:1513  CV82524  [Light Ridge 4C  2010]
  8086:151a  DSL2310  [Eagle Ridge 2C  2011]
  8086:151b  CVL2510  [Light Peak 2C   2010]
  8086:1547  DSL3510  [Cactus Ridge 4C 2012]
  8086:1548  DSL3310  [Cactus Ridge 2C 2012]
  8086:1549  DSL2210  [Port Ridge 1C   2011]

All known newer chips (Redwood Ridge and onwards) set No Command Completed
Support, indicating that they do not support Command Completed events.

The user-visible impact is that after unplugging such a device, 2 seconds
elapse until pciehp is unbound.  That's because on ->remove,
pcie_write_cmd() is called via pcie_disable_notification() and every call
to pcie_write_cmd() takes 2 seconds (1 second for each invocation of
pcie_wait_cmd()):

  [  337.942727] pciehp 0000:0a:00.0:pcie204: Timeout on hotplug command 0x1038 (issued 21176 msec ago)
  [  340.014735] pciehp 0000:0a:00.0:pcie204: Timeout on hotplug command 0x0000 (issued 2072 msec ago)

That by itself has always been unpleasant, but the situation has become
worse with commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
shutdown"):  Now pciehp is unbound on ->shutdown.  Because Thunderbolt
controllers typically have 4 hotplug ports, every reboot and shutdown is
now delayed by 8 seconds, plus another 2 seconds for every attached
Thunderbolt 1 device.

Thunderbolt hotplug slots are not physical slots that one inserts cards
into, but rather logical hotplug slots implemented in silicon.  Devices
appear beyond those logical slots once a PCI tunnel is established on top
of the Thunderbolt Converged I/O switch.  One would expect commands written
to the Slot Control register to be executed immediately by the silicon, so
for simplicity we always assume NoCompl+ for Thunderbolt ports.

Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org # v4.12+
Cc: Sinan Kaya <okaya@codeaurora.org>
Cc: Yehezkel Bernat <yehezkel.bernat@intel.com>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix check to prevent initializing reserved inodes

commit 5012284700775a4e6e3fbe7eac4c543c4874b559 upstream.

Commit 8844618d8aa7: "ext4: only look at the bg_flags field if it is
valid" will complain if block group zero does not have the
EXT4_BG_INODE_ZEROED flag set.  Unfortunately, this is not correct,
since a freshly created file system has this flag cleared.  It gets
almost immediately after the file system is mounted read-write --- but
the following somewhat unlikely sequence will end up triggering a
false positive report of a corrupted file system:

   mkfs.ext4 /dev/vdc
   mount -o ro /dev/vdc /vdc
   mount -o remount,rw /dev/vdc

Instead, when initializing the inode table for block group zero, test
to make sure that itable_unused count is not too large, since that is
the case that will result in some or all of the reserved inodes
getting cleared.

This fixes the failures reported by Eric Whiteney when running
generic/230 and generic/231 in the the nojournal test case.

Fixes: 8844618d8aa7 ("ext4: only look at the bg_flags field if it is valid")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check for allocation block validity with block group locked

commit 8d5a803c6a6ce4ec258e31f76059ea5153ba46ef upstream.

With commit 044e6e3d74a3: "ext4: don't update checksum of new
initialized bitmaps" the buffer valid bit will get set without
actually setting up the checksum for the allocation bitmap, since the
checksum will get calculated once we actually allocate an inode or
block.

If we are doing this, then we need to (re-)check the verified bit
after we take the block group lock.  Otherwise, we could race with
another process reading and verifying the bitmap, which would then
complain about the checksum being invalid.

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1780137

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix inline data updates with checksums enabled

commit 362eca70b53389bddf3143fe20f53dcce2cfdf61 upstream.

The inline data code was updating the raw inode directly; this is
problematic since if metadata checksums are enabled,
ext4_mark_inode_dirty() must be called to update the inode's checksum.
In addition, the jbd2 layer requires that get_write_access() be called
before the metadata buffer is modified.  Fix both of these problems.

https://bugzilla.kernel.org/show_bug.cgi?id=200443

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

squashfs: be more careful about metadata corruption

commit 01cfb7937a9af2abb1136c7e89fbf3fd92952956 upstream.

Anatoly Trosinenko reports that a corrupted squashfs image can cause a
kernel oops.  It turns out that squashfs can end up being confused about
negative fragment lengths.

The regular squashfs_read_data() does check for negative lengths, but
squashfs_read_metadata() did not, and the fragment size code just
blindly trusted the on-disk value.  Fix both the fragment parsing and
the metadata reading code.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: mix rdrand with entropy sent in from userspace

commit 81e69df38e2911b642ec121dec319fad2a4782f3 upstream.

Fedora has integrated the jitter entropy daemon to work around slow
boot problems, especially on VM's that don't support virtio-rng:

    https://bugzilla.redhat.com/show_bug.cgi?id=1572944

It's understandable why they did this, but the Jitter entropy daemon
works fundamentally on the principle: "the CPU microarchitecture is
**so** complicated and we can't figure it out, so it *must* be
random".  Yes, it uses statistical tests to "prove" it is secure, but
AES_ENCRYPT(NSA_KEY, COUNTER++) will also pass statistical tests with
flying colors.

So if RDRAND is available, mix it into entropy submitted from
userspace.  It can't hurt, and if you believe the NSA has backdoored
RDRAND, then they probably have enough details about the Intel
microarchitecture that they can reverse engineer how the Jitter
entropy daemon affects the microarchitecture, and attack its output
stream.  And if RDRAND is in fact an honest DRNG, it will immeasurably
improve on what the Jitter entropy daemon might produce.

This also provides some protection against someone who is able to read
or set the entropy seed file.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: reset bi_iter.bi_done after splitting bio

commit 5151842b9d8732d4cbfa8400b40bff894f501b2f upstream.

After the bio has been updated to represent the remaining sectors, reset
bi_done so bio_rewind_iter() does not rewind further than it should.

This resolves a bio_integrity_process() failure on reads where the
original request was split.

Fixes: 63573e359d05 ("bio-integrity: Restore original iterator on verify stage")
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blkdev: __blkdev_direct_IO_simple: fix leak in error case

commit 9362dd1109f87a9d0a798fbc890cb339c171ed35 upstream.

Fixes: 72ecad22d9f1 ("block: support a full bio worth of IO for simplified bdev direct-io")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: bio_iov_iter_get_pages: fix size of last iovec

commit b403ea2404889e1227812fa9657667a1deb9c694 upstream.

If the last page of the bio is not "full", the length of the last
vector slot needs to be corrected. This slot has the index
(bio->bi_vcnt - 1), but only in bio->bi_io_vec. In the "bv" helper
array, which is shifted by the value of bio->bi_vcnt at function
invocation, the correct index is (nr_pages - 1).

v2: improved readability following suggestions from Ming Lei.
v3: followed a formatting suggestion from Christoph Hellwig.

Fixes: 2cefe4dbaadf ("block: add bio_iov_iter_get_pages()")
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp/mst: Fix off-by-one typo when dump payload table

[ Upstream commit 7056a2bccc3b5afc51f9b35b30a46f0d9219968d ]

It seems there is a classical off-by-one typo from the beginning
when commit

  ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")

introduced a new helper.

Fix a typo by introducing a macro constant.

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180319141932.37290-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/atomic-helper: Drop plane->fb references only for drm_atomic_helper_shutdown()

[ Upstream commit 5e9cfeba6abb7e1a3f240bd24eb29178f0b83716 ]

drm_atomic_helper_shutdown() needs to release the reference held by
plane->fb. Since commit 49d70aeaeca8 ("drm/atomic-helper: Fix leak in
disable_all") we're doing that by calling drm_atomic_clean_old_fb() in
drm_atomic_helper_disable_all(). This also leaves plane->fb == NULL
afterwards. However, since drm_atomic_helper_disable_all() is also
used by the i915 gpu reset code
drm_atomic_helper_commit_duplicated_state() then has to undo the
damage and put the correct plane->fb pointers back in (and also
adjust the ref counts to match again as well).

That approach doesn't work so well for load detection as nothing
sets up the plane->old_fb pointers for us. This causes us to
leak an extra reference for each plane->fb when
drm_atomic_helper_commit_duplicated_state() calls
drm_atomic_clean_old_fb() after load detection.

To fix this let's call drm_atomic_clean_old_fb() only for
drm_atomic_helper_shutdown() as that's the only time we need to
actually drop the plane->fb references. In all the other cases
(load detection, gpu reset) we want to leave plane->fb alone.

v2: Don't inflict the clean_old_fbs bool to drivers (Daniel)
v3: Squash in the revert and rewrite the commit msg (Daniel)

Cc: martin.peres@free.fr
Cc: chris@chris-wilson.co.uk
Cc: Dave Airlie <airlied@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #pre-squash
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: Add DP PSR2 sink enable bit

[ Upstream commit 4f212e40468650e220c1770876c7f25b8e0c1ff5 ]

To comply with eDP1.4a this bit should be set when enabling PSR2.

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-1-jose.souza@intel.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: topology: Add missing clock gating parameter when parsing hw_configs

[ Upstream commit 933e1c4a667103c4d10ebdc9505a0a6abd8c3fbd ]

Clock gating parameter is a part of `dai_fmt`. It is supported by
`alsa-lib` when creating a topology binary file, but ignored by kernel
when loading this topology file.

After applying this commit, the clock gating parameter is not ignored any
more. This solution is backwards compatible. The existing behaviour is
not broken, because by default the parameter value is 0 and is ignored.

snd_soc_tplg_hw_config.clock_gated = 0 => no effect
snd_soc_tplg_hw_config.clock_gated = 1 => SND_SOC_DAIFMT_GATED
snd_soc_tplg_hw_config.clock_gated = 2 => SND_SOC_DAIFMT_CONT

For example, the following config, based on
alsa-lib/src/conf/topology/broadwell/broadwell.conf, is now supported:

~~~~
SectionHWConfig."CodecHWConfig" {
        id "1"
        format "I2S"            # physical audio format.
        pm_gate_clocks "true"   # clock can be gated
}

SectionLink."Codec" {

        # used for binding to the physical link
        id "0"

        hw_configs [
                "CodecHWConfig"
        ]

        default_hw_conf_id "1"
}
~~~~

Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Pan Xiuli <xiuli.pan@linux.intel.com>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: topology: Fix bclk and fsync inversion in set_link_hw_format()

[ Upstream commit a941e2fab3207cb0d57dc4ec47b1b12c8ea78b84 ]

The values of bclk and fsync are inverted WRT the codec. But the existing
solution already works for Broadwell, see the alsa-lib config:

`alsa-lib/src/conf/topology/broadwell/broadwell.conf`

This commit provides the backwards-compatible solution to fix this misuse.

Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: si470x: fix __be16 annotations

[ Upstream commit 90db5c829692a0a7845e977e45719b4699216bd4 ]

The annotations there are wrong as warned:
   drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16
   drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16
   drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16
   drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16
   drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: warning: incorrect type in assignment (different base types)
   drivers/media/radio/si470x/radio-si470x-i2c.c:129:24:    expected unsigned short [unsigned] [short] <noident>
   drivers/media/radio/si470x/radio-si470x-i2c.c:129:24:    got restricted __be16 [usertype] <noident>
   drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16
   drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16
   drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16
   drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: atomisp: compat32: fix __user annotations

[ Upstream commit ad4222a0e29664666a71685a6e732923ca7c7e45 ]

The __user annotations at the compat32 code is not right:

   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:81:18: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:81:18:    expected void *base
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:81:18:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:232:23: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:232:23:    expected unsigned int [usertype] *xcoords_y
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:232:23:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:233:23: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:233:23:    expected unsigned int [usertype] *ycoords_y
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:233:23:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:234:24: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:234:24:    expected unsigned int [usertype] *xcoords_uv
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:234:24:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:235:24: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:235:24:    expected unsigned int [usertype] *ycoords_uv
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:235:24:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:296:29: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:296:29:    expected unsigned int [usertype] *effective_width
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:296:29:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:360:29: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:360:29:    expected unsigned int [usertype] *effective_width
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:360:29:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:437:19: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:437:19:    expected struct v4l2_framebuffer *frame
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:437:19:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:481:29: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:481:29:    expected unsigned short *calb_grp_values
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:481:29:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:701:39: warning: cast removes address space of expression
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:704:21: warning: incorrect type in argument 1 (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:704:21:    expected void const volatile [noderef] <asn:1>*<noident>
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:704:21:    got unsigned int [usertype] *src
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:737:43: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:737:43:    expected struct atomisp_shading_table *shading_table
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:737:43:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:742:44: warning: incorrect type in argument 1 (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:742:44:    expected void [noderef] <asn:1>*to
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:742:44:    got struct atomisp_shading_table *shading_table
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:755:41: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:755:41:    expected struct atomisp_morph_table *morph_table
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:755:41:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:760:44: warning: incorrect type in argument 1 (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:760:44:    expected void [noderef] <asn:1>*to
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:760:44:    got struct atomisp_morph_table *morph_table
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:772:40: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:772:40:    expected struct atomisp_dvs2_coefficients *dvs2_coefs
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:772:40:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:777:44: warning: incorrect type in argument 1 (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:777:44:    expected void [noderef] <asn:1>*to
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:777:44:    got struct atomisp_dvs2_coefficients *dvs2_coefs
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:788:46: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:788:46:    expected struct atomisp_dvs_6axis_config *dvs_6axis_config
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:788:46:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:793:44: warning: incorrect type in argument 1 (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:793:44:    expected void [noderef] <asn:1>*to
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:793:44:    got struct atomisp_dvs_6axis_config *dvs_6axis_config
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:853:17: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:853:17:    expected struct atomisp_sensor_ae_bracketing_lut_entry *lut
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:853:17:    got void [noderef] <asn:1>*

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: cxlflash: Avoid clobbering context control register value

[ Upstream commit 465891fe9237b02f8d0fd26448f733fae7236f4a ]

The SISLite specification originally defined the context control register with
a single field of bits to represent the LISN and also stipulated that the
register reset value be 0. The cxlflash driver took advantage of this when
programming the LISN for the master contexts via an unconditional write - no
other bits were preserved.

When unmap support was added, SISLite was updated to define bit 0 of the
context control register as a way for the AFU to notify the context owner that
unmap operations were supported. Thus the assumptions under which the register
is setup changed and the existing unconditional write is clobbering the unmap
state for master contexts. This is presently not an issue due to the order in
which the context control register is programmed in relation to the unmap bit
being queried but should be addressed to avoid a future regression in the
event this code is moved elsewhere.

To remedy this issue, preserve the bits when programming the LISN field in the
context control register. Since the LISN will now be programmed using a read
value, assert that the initial state of the LISN field is as described in
SISLite (0).

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: cxlflash: Synchronize reset and remove ops

[ Upstream commit a3feb6ef50def7c91244d7bd15a3625b7b49b81f ]

The following Oops can be encountered if a device removal or system shutdown
is initiated while an EEH recovery is in process:

[c000000ff2f479c0] c008000015256f18 cxlflash_pci_slot_reset+0xa0/0x100
                                      [cxlflash]
[c000000ff2f47a30] c00800000dae22e0 cxl_pci_slot_reset+0x168/0x290 [cxl]
[c000000ff2f47ae0] c00000000003ef1c eeh_report_reset+0xec/0x170
[c000000ff2f47b20] c00000000003d0b8 eeh_pe_dev_traverse+0x98/0x170
[c000000ff2f47bb0] c00000000003f80c eeh_handle_normal_event+0x56c/0x580
[c000000ff2f47c60] c00000000003fba4 eeh_handle_event+0x2a4/0x338
[c000000ff2f47d10] c0000000000400b8 eeh_event_handler+0x1f8/0x200
[c000000ff2f47dc0] c00000000013da48 kthread+0x1a8/0x1b0
[c000000ff2f47e30] c00000000000b528 ret_from_kernel_thread+0x5c/0xb4

The remove handler frees AFU memory while the EEH recovery is in progress,
leading to a race condition. This can result in a crash if the recovery thread
tries to access this memory.

To resolve this issue, the cxlflash remove handler will evaluate the device
state and yield to any active reset or probing threads.

Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: megaraid_sas: Increase timeout by 1 sec for non-RAID fastpath IOs

[ Upstream commit 3239b8cd28fd849a2023483257d35d68c5876c74 ]

Hardware could time out Fastpath IOs one second earlier than the timeout
provided by the host.

For non-RAID devices, driver provides timeout value based on OS provided
timeout value. Under certain scenarios, if the OS provides a timeout
value of 1 second, due to above behavior hardware will timeout
immediately.

Increase timeout value for non-RAID fastpath IOs by 1 second.

Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: scsi_dh: replace too broad "TP9" string with the exact models

[ Upstream commit 37b37d2609cb0ac267280ef27350b962d16d272e ]

SGI/TP9100 is not an RDAC array:
    ^^^
https://git.opensvc.com/gitweb.cgi?p=multipath-tools/.git;a=blob;f=libmultipath/hwtable.c;h=88b4700beb1d8940008020fbe4c3cd97d62f4a56;hb=HEAD#l235

This partially reverts commit 35204772ea03 ("[SCSI] scsi_dh_rdac :
Consolidate rdac strings together")

[mkp: fixed up the new entries to align with rest of struct]

Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Cc: DM ML <dm-devel@redhat.com>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: Don't return or expect -errno from of_map_mode()

[ Upstream commit 02f3703934a42417021405ef336fe45add13c3d1 ]

In of_get_regulation_constraints() we were taking the result of
of_map_mode() (an unsigned int) and assigning it to an int.  We were
then checking whether this value was -EINVAL.  Some implementers of
of_map_mode() were returning -EINVAL (even though the return type of
their function needed to be unsigned int) because they needed to
signal an error back to of_get_regulation_constraints().

In general in the regulator framework the mode is always referred to
as an unsigned int.  While we could fix this to be a signed int (the
highest value we store in there right now is 0x8), it's actually
pretty clean to just define the regulator mode 0x0 (the lack of any
bits set) as an invalid mode.  Let's do that.

Fixes: 5e5e3a42c653 ("regulator: of: Add support for parsing initial and suspend modes")
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: omap3isp: fix unbalanced dma_iommu_mapping

[ Upstream commit b7e1e6859fbf60519fd82d7120cee106a6019512 ]

The OMAP3 ISP driver manages its MMU mappings through the IOMMU-aware
ARM DMA backend. The current code creates a dma_iommu_mapping and
attaches this to the ISP device, but never detaches the mapping in
either the probe failure paths or the driver remove path resulting
in an unbalanced mapping refcount and a memory leak. Fix this properly.

Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Suman Anna <s-anna@ti.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: authenc - don't leak pointers to authenc keys

[ Upstream commit ad2fdcdf75d169e7a5aec6c7cb421c0bec8ec711 ]

In crypto_authenc_setkey we save pointers to the authenc keys in
a local variable of type struct crypto_authenc_keys and we don't
zeroize it after use. Fix this and don't leak pointers to the
authenc keys.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: authencesn - don't leak pointers to authenc keys

[ Upstream commit 31545df391d58a3bb60e29b1192644a6f2b5a8dd ]

In crypto_authenc_esn_setkey we save pointers to the authenc keys
in a local variable of type struct crypto_authenc_keys and we don't
zeroize it after use. Fix this and don't leak pointers to the
authenc keys.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: hub: Don't wait for connect state at resume for powered-off ports

[ Upstream commit 5d111f5190848d6fb1c414dc57797efea3526a2f ]

wait_for_connected() wait till a port change status to
USB_PORT_STAT_CONNECTION, but this is not possible if
the port is unpowered. The loop will only exit at timeout.

Such case take place if an over-current incident happen
while system is in S3. Then during resume wait_for_connected()
will wait 2s, which may be noticeable by the user.

Signed-off-by: Dominik Bozek <dominikx.bozek@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

microblaze: Fix simpleImage format generation

[ Upstream commit ece97f3a5fb50cf5f98886fbc63c9665f2bb199d ]

simpleImage generation was broken for some time. This patch is fixing
steps how simpleImage.*.ub file is generated. Steps are objdump of
vmlinux and create .ub.
Also make sure that there is striped elf version with .strip suffix.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: imx: gpcv2: Do not pass static memory as platform data

[ Upstream commit 050f810e238f268670f14a8f8b793ba2dbf2e92f ]

Platform device core assumes the ownership of dev.platform_data as
well as that it is dynamically allocated and it will try to kfree it
as a part of platform_device_release(). Change the code to use
platform_device_add_data() n instead of a pointer to a static memory
to avoid causing a BUG() when calling platform_device_put().

The problem can be reproduced by artificially enabling the error path
of platform_device_add() call (around line 357).

Note that this change also allows us to constify imx7_pgc_domains,
since we no longer need to be able to modify it.

Cc: Stefan Agner <stefan@agner.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: core: Make sure compiler barfs for 16-byte earlycon names

[ Upstream commit c1c734cb1f54b062f7e67ffc9656d82f5b412b9c ]

As part of bringup I ended up wanting to call an earlycon driver by a
name that was exactly 16-bytes big, specifically "qcom_geni_serial".

Unfortunately, when I tried this I found that things compiled just
fine.  They just didn't work.

Specifically the compiler felt perfectly justified in initting the
".name" field of "struct earlycon_id" with the full 16-bytes and just
skipping the '\0'.  Needless to say, that behavior didn't seem ideal,
but I guess someone must have allowed it for a reason.

One way to fix this is to shorten the name field to 15 bytes and then
add an extra byte after that nobody touches.  This should always be
initted to 0 and we're golden.

There are, of course, other ways to fix this too.  We could audit all
the users of the "name" field and make them stop at both null
termination or at 16 bytes.  We could also just make the name field
much bigger so that we're not likely to run into this.  ...but both
seem like we'll just hit the bug again.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: free resource when ldlm_lock_create() fails.

[ Upstream commit d8caf662b4aeeb2ac83ac0b22e40db88e9360c77 ]

ldlm_lock_create() gets a resource, but don't put it on
all failure paths. It should.

Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: correct removexattr detection

[ Upstream commit 1b60f6dfa38403ff7c4d0b4b7ecdb810f9789a2a ]

In ll_xattr_set_common() detect the removexattr() case correctly by
testing for a NULL value as well as XATTR_REPLACE.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-10787
Reviewed-on: https://review.whamcloud.com/
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vchiq_core: Fix missing semaphore release in error case

[ Upstream commit 8113b89fc615cfb531df0334fb3a091cf6a45ce0 ]

The bail out branch in case of a invalid tx_pos missed a semaphore
release. Dan Carpenter found this with a static checker.

Fixes: d1eab9dec610 ("staging: vchiq_core: Bail out in case of invalid tx_pos")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: allow not equal op for audit by executable

[ Upstream commit 23bcc480dac204c7dbdf49d96b2c918ed98223c2 ]

Current implementation of auditing by executable name only implements
the 'equal' operator. This patch extends it to also support the 'not
equal' operator.

See: https://github.com/linux-audit/audit-kernel/issues/53

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: fix nommu_map_sg overflow kernel panic

[ Upstream commit f700546682a62a87a9615121a37ee7452dab4b76 ]

Following overflow kernel panic is observed on some platforms while
loading the driver. It is fixed if dynamically allocated memory is
passed to SDIO instead of static one

[  927.513963] nommu_map_sg: overflow 17d54064ba7c+20 of device mask ffffffff
[  927.517712] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211
       btrsi rfcomm bluetooth ecdh_generic snd_soc_sst_bytcr_rt5660
[  927.517861] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000 #1
[  927.517870] RIP: 0010:sdhci_send_command+0x5f0/0xa90 [sdhci]
[  927.517873] RSP: 0000:ffffac3fc064b6d8 EFLAGS: 00010086
[  927.517895] Call Trace:
[  927.517908]  ? __schedule+0x3cd/0x890
[  927.517915]  ? mod_timer+0x17b/0x3c0
[  927.517922]  sdhci_request+0x7c/0xf0 [sdhci]
[  927.517928]  __mmc_start_request+0x5a/0x170
[  927.517932]  mmc_start_request+0x74/0x90
[  927.517936]  mmc_wait_for_req+0x87/0xe0
[  927.517940]  mmc_io_rw_extended+0x2fd/0x330
[  927.517946]  ? mmc_wait_data_done+0x30/0x30
[  927.517951]  sdio_io_rw_ext_helper+0x160/0x210
[  927.517956]  sdio_writesb+0x1d/0x20
[  927.517966] rsi_sdio_write_register_multiple+0x68/0x110 [rsi_sdio]
[  927.517976]  rsi_hal_device_init+0x357/0x910 [rsi_91x]
[  927.517983]  ? rsi_hal_device_init+0x357/0x910 [rsi_91x]
[  927.517990]  rsi_probe+0x2c6/0x450 [rsi_sdio]
[  927.517995]  sdio_bus_probe+0xfc/0x110
[  927.518000]  driver_probe_device+0x2b3/0x490
[  927.518005]  __driver_attach+0xdf/0xf0
[  927.518008]  ? driver_probe_device+0x490/0x490
[  927.518014]  bus_for_each_dev+0x6c/0xc0
[  927.518018]  driver_attach+0x1e/0x20
[  927.518021]  bus_add_driver+0x1f4/0x270
[  927.518028]  ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio]
[  927.518031]  driver_register+0x60/0xe0
[  927.518038]  ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio]
[  927.518041]  sdio_register_driver+0x20/0x30
[  927.518047]  rsi_module_init+0x16/0x40 [rsi_sdio]

Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: Fix 'invalid vdd' warning in mmc

[ Upstream commit 78e450719c702784e42af6da912d3692fd3da0cb ]

While performing cleanup, driver is messing with card->ocr
value by not masking rocr against ocr_avail. Below panic
is observed with some of the SDIO host controllers due to
this. Issue is resolved by reverting incorrect modifications
to vdd.

[  927.423821] mmc1: Invalid vdd 0x1f
[  927.423925] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x
       mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic
[  927.424073] CPU: 0 PID: 1624 Comm: insmod Tainted: G W        4.15.0-1000-caracalla #1
[  927.424075] Hardware name: Dell Inc. Edge Gateway 3003/      , BIOS 01.00.06 01/22/2018
[  927.424082] RIP: 0010:sdhci_set_power_noreg+0xdd/0x190[sdhci]
[  927.424085] RSP: 0018:ffffac3fc064b930 EFLAGS:  00010282
[  927.424107] Call Trace:
[  927.424118]  sdhci_set_power+0x5a/0x60 [sdhci]
[  927.424125]  sdhci_set_ios+0x360/0x3b0 [sdhci]
[  927.424133]  mmc_set_initial_state+0x92/0x120
[  927.424137]  mmc_power_up.part.34+0x33/0x1d0
[  927.424141]  mmc_power_up+0x17/0x20
[  927.424147]  mmc_sdio_runtime_resume+0x2d/0x50
[  927.424151]  mmc_runtime_resume+0x17/0x20
[  927.424156]  __rpm_callback+0xc4/0x200
[  927.424161]  ? idr_alloc_cyclic+0x57/0xd0
[  927.424165]  ? mmc_runtime_suspend+0x20/0x20
[  927.424169]  rpm_callback+0x24/0x80
[  927.424172]  ? mmc_runtime_suspend+0x20/0x20
[  927.424176]  rpm_resume+0x4b3/0x6c0
[  927.424181]  __pm_runtime_resume+0x4e/0x80
[  927.424188]  driver_probe_device+0x41/0x490
[  927.424192]  __driver_attach+0xdf/0xf0
[  927.424196]  ? driver_probe_device+0x490/0x490
[  927.424201]  bus_for_each_dev+0x6c/0xc0
[  927.424205]  driver_attach+0x1e/0x20
[  927.424209]  bus_add_driver+0x1f4/0x270
[  927.424217]  ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio]
[  927.424221]  driver_register+0x60/0xe0
[  927.424227]  ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio]
[  927.424231]  sdio_register_driver+0x20/0x30
[  927.424237]  rsi_module_init+0x16/0x40 [rsi_sdio]

Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipconfig: Correctly initialise ic_nameservers

[ Upstream commit 300eec7c0a2495f771709c7642aa15f7cc148b83 ]

ic_nameservers, which stores the list of name servers discovered by
ipconfig, is initialised (i.e. has all of its elements set to NONE, or
0xffffffff) by ic_nameservers_predef() in the following scenarios:

 - before the "ip=" and "nfsaddrs=" kernel command line parameters are
   parsed (in ip_auto_config_setup());
 - before autoconfiguring via DHCP or BOOTP (in ic_bootp_init()), in
   order to clear any values that may have been set after parsing "ip="
   or "nfsaddrs=" and are no longer needed.

This means that ic_nameservers_predef() is not called when neither "ip="
nor "nfsaddrs=" is specified on the kernel command line. In this
scenario, every element in ic_nameservers remains set to 0x00000000,
which is indistinguishable from ANY and causes pnp_seq_show() to write
the following (bogus) information to /proc/net/pnp:

  #MANUAL
  nameserver 0.0.0.0
  nameserver 0.0.0.0
  nameserver 0.0.0.0

This is potentially problematic for systems that blindly link
/etc/resolv.conf to /proc/net/pnp.

Ensure that ic_nameservers is also initialised when neither "ip=" nor
"nfsaddrs=" are specified by calling ic_nameservers_predef() in
ip_auto_config(), but only when ip_auto_config_setup() was not called
earlier. This causes the following to be written to /proc/net/pnp, and
is consistent with what gets written when ipconfig is configured
manually but no name servers are specified on the kernel command line:

  #MANUAL

Signed-off-by: Chris Novakovic <chris@chrisn.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/gma500: fix psb_intel_lvds_mode_valid()'s return type

[ Upstream commit 2ea009095c6e7396915a1d0dd480c41f02985f79 ]

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method, psb_intel_lvds_mode_valid(), uses an 'int' for it.

Fix this by using 'enum drm_mode_status' for psb_intel_lvds_mode_valid().

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131458.2060-1-luc.vanoostenryck@gmail.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igb: Fix queue selection on MAC filters on i210

[ Upstream commit 4dc93fcf0b95dc3fda4db917effae31fbb8ad2a8 ]

On the RAH registers there are semantic differences on the meaning of
the "queue" parameter for traffic steering depending on the controller
model: there is the 82575 meaning, which "queue" means a RX Hardware
Queue, and the i350 meaning, where it is a reception pool.

The previous behaviour was having no effect for i210 based controllers
because the QSEL bit of the RAH register wasn't being set.

This patch separates the condition in discrete cases, so the different
handling is clearer.

Fixes: 83c21335c876 ("igb: improve MAC filter handling")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: defconfig: Enable Rockchip io-domain driver

[ Upstream commit 7c8b77f81552c2b0e5d9c560da70bc4149ce66a5 ]

Heiko Stübner justified pretty well the change in commit e330eb86ba0b
("ARM: multi_v7_defconfig: enable Rockchip io-domain driver"). This
change is also needed for arm64 rockchip boards, so, do the same for arm64.

The io-domain driver is necessary to notify the soc about voltages
changes happening on supplying regulators. Probably the most important
user right now is the mmc tuning code, where the soc needs to get
notified when the voltage is dropped to the 1.8V point.

As this option is necessary to successfully tune UHS cards etc, it
should get built in. Otherwise, tuning will fail with,

   dwmmc_rockchip fe320000.dwmmc: All phases bad!
   mmc0: tuning execution failed: -5

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme: lightnvm: add granby support

[ Upstream commit ea48e877994f086af481427bac110aa63686c3ce ]

Add a new lightnvm quirk to identify CNEX’s Granby controller.

Signed-off-by: Wei Xu <wxu@cnexlabs.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memory: tegra: Apply interrupts mask per SoC

[ Upstream commit 1c74d5c0de0c2cc29fef97a19251da2ad6f579bd ]

Currently we are enabling handling of interrupts specific to Tegra124+
which happen to overlap with previous generations. Let's specify
interrupts mask per SoC generation for consistency and in a preparation
of squashing of Tegra20 driver into the common one that will enable
handling of GART faults which may be undesirable by newer generations.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memory: tegra: Do not handle spurious interrupts

[ Upstream commit bf3fbdfbec947cdd04b2f2c4bce11534c8786eee ]

The ISR reads interrupts-enable mask, but doesn't utilize it. Apply the
mask to the interrupt status and don't handle interrupts that MC driver
haven't asked for. Kernel would disable spurious MC IRQ and report the
error. This would happen only in a case of a very severe bug.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

delayacct: Use raw_spinlocks

[ Upstream commit 02acc80d19edb0d5684c997b2004ad19f9f5236e ]

try_to_wake_up() might invoke delayacct_blkio_end() while holding the
pi_lock (which is a raw_spinlock_t). delayacct_blkio_end() acquires
task_delay_info.lock which is a spinlock_t. This causes a might sleep splat
on -RT where non raw spinlocks are converted to 'sleeping' spinlocks.

task_delay_info.lock is only held for a short amount of time so it's not a
problem latency wise to make convert it to a raw spinlock.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: https://lkml.kernel.org/r/20180423161024.6710-1-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stop_machine: Use raw spinlocks

[ Upstream commit de5b55c1d4e30740009864eb35ce4ed856aac01d ]

Use raw-locks in stop_machine() to allow locking in irq-off and
preempt-disabled regions on -RT. This also documents the possible locking
context in general.

[bigeasy: update patch description.]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20180423191635.6014-1-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

backlight: pwm_bl: Don't use GPIOF_* with gpiod_get_direction

[ Upstream commit bb084c0f61d659f0e6d371b096e0e57998f191d6 ]

The documentation was wrong, gpiod_get_direction() returns 0/1 instead
of the GPIOF_* flags. The docs were fixed with commit 94fc73094abe47
("gpio: correct docs about return value of gpiod_get_direction"). Now,
fix this user (until a better, system-wide solution is in place).

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: net: meson-dwmac: new compatible name for AXG SoC

[ Upstream commit 7e5d05e18ba1ed491c6f836edee7f0b90f3167bc ]

We need to introduce a new compatible name for the Meson-AXG SoC
in order to support the RMII 100M ethernet PHY, since the PRG_ETH0
register of the dwmac glue layer is changed from previous old SoC.

Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>