xhci: trace: mmio reads+writes

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

xhci: Clean up reset function

Properly register reset function via the device class.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

usb-storage: migration support

With all scsi migration support bits in place the
final step is pretty simple ;)

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

usb-storage: add scsi_off, remove scsi_buf

Repace the running buffer pointer (scsi_buf) with a buffer offset
field (scsi_off).  The later is alot easier to live-migrate.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

usb-storage: add usb_msd_packet_complete()

Factor out packet completion to a separate function which
cares to get the MSDState->packet update right.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

usb-storage: remove MSDState->residue

We have the field twice, once in MSDState directly and one in the status
word struct.  Drop one.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

scsi: prepare migration code for usb-storage support

usb-storage can't handle requests in one go as the data transfer can be
splitted into lots of usb packets.  Because of that there can be
normal in-flight requests at savevm time and we need to handle that.
With other scsi hba's this happens only in case i/o is stopped due to
errors and there are pending requests which need to be restarted
(req->retry = true).

So, first we need to save req->retry and then handle the req->retry =
false case.  Write requests are handled fine already.  For read requests
we have to save the buffer as we will not restart the request (and thus
not refill the buffer) on the target host.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

uhci: fix irq routing

The multifunction ich9 ehci controller with uhci companions uses a
different interrupt pin for each function.  The three uhci devices
get pins A, B and C, whereas ehci uses pin D.  This way the guest
can assign different IRQ lines to each controller.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

uhci: zap uhci_pre_save

Cancel transactions before saving vmstate is pretty pointless and just
causes disruptions.  We need to cancel them before *loading* vmstate,
but in that case uhci_reset() handles it already and no special action
is needed.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

uhci: fix trace format strings

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

uhci: make bandwidth tunable

Add a property for the uhci bandwidth.  Can be used to make uhci
emulation run faster than real hardware.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

uhci: use bottom half

Schedule bottom half on completion of async packets instead of calling
uhci_process_frame directly.  This way we run uhci_process_frame only
once in case multiple packets finish in a row.  Also check whenever
there is bandwidth left before scheduling uhci_process_frame.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

uhci: fix bandwidth management

uhci_process_frame() can be invoked multiple times per frame, so
accounting usb bandwith in a local variable doesn't fly, use a variable
in UHCIState instead.  Also check the limit more frequently.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Merge remote-tracking branch 'qmp/queue/qmp' into staging

* qmp/queue/qmp: (29 commits)
  Add 'query-events' command to QMP to query async events
  qapi: convert netdev_del
  qapi: convert netdev_add
  net: net_client_init(): use error_set()
  net: purge the monitor object from all init functions
  qemu-config: introduce qemu_find_opts_err()
  qemu-config: find_list(): use error_set()
  qerror: introduce QERR_INVALID_OPTION_GROUP
  qemu-option: qemu_opts_from_qdict(): use error_set()
  qemu-option: introduce qemu_opt_set_err()
  qemu-option: opt_set(): use error_set()
  qemu-option: qemu_opts_validate(): use error_set()
  qemu-option: qemu_opt_parse(): use error_set()
  qemu-option: parse_option_size(): use error_set()
  qemu-option: parse_option_bool(): use error_set()
  qemu-option: parse_option_number(): use error_set()
  qemu-option: qemu_opts_create(): use error_set()
  introduce a new monitor command 'dump-guest-memory' to dump guest's memory
  make gdb_id() generally avialable and rename it to cpu_index()
  target-i386: Add API to get note's size
  ...

Merge remote-tracking branch 'afaerber-or/qom-cpu-3' into staging

* afaerber-or/qom-cpu-3: (74 commits)
  Kill off cpu_state_reset()
  linux-user: Use cpu_reset() after cpu_init() / cpu_copy()
  bsd-user: Use cpu_reset() in after cpu_init()
  leon3: Store SPARCCPU in ResetData
  leon3: Use cpu_sparc_init() to obtain SPARCCPU
  sun4u: Store SPARCCPU in ResetData
  sun4u: Let cpu_devinit() return SPARCCPU
  sun4u: Use cpu_sparc_init() to obtain SPARCCPU
  sun4m: Pass SPARCCPU to {main,secondary}_cpu_reset()
  sun4m: Use cpu_sparc_init() to obtain SPARCCPU
  target-sparc: Let cpu_sparc_init() return SPARCCPU
  cpu-exec: Use cpu_reset() in cpu_exec() for TARGET_PPC
  virtex_ml507: Pass PowerPCCPU to main_cpu_reset()
  virtex_ml507: Let ppc440_init_xilinx() return PowerPCCPU
  virtex_ml507: Use cpu_ppc_init() to obtain PowerPCCPU
  ppc_prep: Pass PowerPCCPU to ppc_prep_reset()
  ppc_prep: Use cpu_ppc_init() to obtain PowerPCCPU
  ppc_oldworld: Pass PowerPCCPU to ppc_heathrow_reset()
  ppc_oldworld: Use cpu_ppc_init() to obtain PowerPCCPU
  ppc_newworld: Pass PowerPCCPU to ppc_core99_reset()
  ...

Merge remote-tracking branch 'qemu-kvm/uq/master' into staging

* qemu-kvm/uq/master:
  kvm: Fix build for non-CAP_IRQ_ROUTING targets

kvm: Fix build for non-CAP_IRQ_ROUTING targets

A type definition and a KVMState field initialization escaped the
required wrapping with KVM_CAP_IRQ_ROUTING. Also, we need to provide a
dummy kvm_irqchip_release_virq as virtio-pci references (but does not
use) it.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ben Collins <bcollins@ubuntu.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>

Revert "Revert "rtl8139: do the network/host communication only in normal operating mode""

This reverts commit 9c92bf7f6c3f675e60b8ba8a5287bb88ea1eac36.

Per Jason's request.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Kill off cpu_state_reset()

In commit 1bba0dc932e8826a7d030df3767daf0bc339f9a2 cpu_reset()
was renamed to cpu_state_reset(), to allow introducing a new cpu_reset()
that would operate on QOM objects.

All callers have been updated except for one in target-mips, so drop all
implementations except for the one in target-mips and move the
declaration there until MIPSCPU reset can be fully QOM'ified.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris)
Acked-by: Alexander Graf <agraf@suse.de> (for ppc)
Acked-by: Blue Swirl <blauwirbel@gmail.com>

linux-user: Use cpu_reset() after cpu_init() / cpu_copy()

Eliminates cpu_state_reset() usage.

Signed-off-by: Andreas Färber <afaerber@suse.de>

bsd-user: Use cpu_reset() in after cpu_init()

Eliminates cpu_state_reset() usage.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Blue Swirl <blauwirbel@gmail.com>

leon3: Store SPARCCPU in ResetData

Allows us to use cpu_reset() in place of cpu_state_reset() in
main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Blue Swirl <blauwirbel@gmail.com>

leon3: Use cpu_sparc_init() to obtain SPARCCPU

Needed for main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Blue Swirl <blauwirbel@gmail.com>

sun4u: Store SPARCCPU in ResetData

We can now use cpu_reset() in place of cpu_state_reset() in
main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Blue Swirl <blauwirbel@gmail.com>

sun4u: Let cpu_devinit() return SPARCCPU

Needed for main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Blue Swirl <blauwirbel@gmail.com>

sun4u: Use cpu_sparc_init() to obtain SPARCCPU

This prepares using it in sun4uv_init().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Blue Swirl <blauwirbel@gmail.com>

sun4m: Pass SPARCCPU to {main,secondary}_cpu_reset()

We can now use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Blue Swirl <blauwirbel@gmail.com>

sun4m: Use cpu_sparc_init() to obtain SPARCCPU

Needed for {main,secondary}_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Blue Swirl <blauwirbel@gmail.com>

target-sparc: Let cpu_sparc_init() return SPARCCPU

Make include paths for cpu-qom.h consistent, so that SPARCCPU can be
used in cpu.h.

Turn cpu_init macro into a static inline function returning
CPUSPARCState for backwards compatibility.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Blue Swirl <blauwirbel@gmail.com>

cpu-exec: Use cpu_reset() in cpu_exec() for TARGET_PPC

CPUState will be needed for all targets in the future, so place it into
the main variable declaration block.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

virtex_ml507: Pass PowerPCCPU to main_cpu_reset()

Allows us to call cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

virtex_ml507: Let ppc440_init_xilinx() return PowerPCCPU

Needed for main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

virtex_ml507: Use cpu_ppc_init() to obtain PowerPCCPU

Needed to change ppc440_init_xilinx() return type.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

ppc_prep: Pass PowerPCCPU to ppc_prep_reset()

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

ppc_prep: Use cpu_ppc_init() to obtain PowerPCCPU

Needed for ppc_prep_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

ppc_oldworld: Pass PowerPCCPU to ppc_heathrow_reset()

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

ppc_oldworld: Use cpu_ppc_init() to obtain PowerPCCPU

Needed for ppc_heathrow_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

ppc_newworld: Pass PowerPCCPU to ppc_core99_reset()

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

ppc_newworld: Use cpu_ppc_init() to obtain PowerPCCPU

Needed for ppc_core99_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

ppc4xx_devs: Pass PowerPCCPU to ppc4xx_reset()

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

ppc4xx_devs: Use cpu_ppc_init() to obtain PowerPCCPU

Needed for ppc4xx_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

ppc440_bamboo: Pass PowerPCCPU to main_cpu_reset()

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

ppc440_bamboo: Use cpu_ppc_init() to obtain PowerPCCPU

Needed for main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

spapr: Pass PowerPCCPU to spapr_cpu_reset()

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

spapr: Use cpu_ppc_init() to obtain PowerPCCPU

Needed for spapr_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

ppce500_mpc8544ds: Pass PowerPCCPU to mpc8544ds_cpu_reset[_sec]

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

target-ppc: Let cpu_ppc_init() return PowerPCCPU

Adapt e500 mpc8544ds machine accordingly.

Turn cpu_init() into a static inline function returning CPUPPCState for
backwards compatibility.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>

mips_r4k: Store MIPSCPU in ResetData

Allows us to use cpu_reset() in place of cpu_state_reset() in
main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>

mips_r4k: Use cpu_mips_init() to obtain MIPSCPU

Needed for main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>

mips_mipssim: Store MIPSCPU in ResetData

Allows us to use cpu_reset() in place of cpu_state_reset() in
main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>

mips_mipssim: Use cpu_mips_init() to obtain MIPSCPU

Needed for main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>

mips_malta: Pass MIPSCPU to main_cpu_reset()

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>

mips_malta: Use cpu_mips_init() to obtain MIPSCPU

Needed for main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>

mips_jazz: Pass MIPSCPU to main_cpu_reset()

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>

mips_jazz: Use cpu_mips_init() to obtain MIPSCPU

Needed for main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>

mips_fulong2e: Pass MIPSCPU to main_cpu_reset()

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>

mips_fulong2e: Use cpu_mips_cpu() to obtain MIPSCPU

Needed for main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>

target-mips: Let cpu_mips_init() return MIPSCPU

Turn cpu_init macro into a static inline function returning CPUMIPSState
for backwards compatibility.

Signed-off-by: Andreas Färber <afaerber@suse.de>

target-mips: Use cpu_reset() in do_interrupt()

Signed-off-by: Andreas Färber <afaerber@suse.de>

target-mips: Use cpu_reset() in cpu_mips_init()

Commit 0f71a7095db6bc055bc5bb520d85ea650cca8a33 (target-mips: QOM'ify
CPU) hooked up cpu_state_reset() to CPUClass::reset(). Dropping the
introduction of subclasses for 1.1, due to mips_def_t the reset code
could not be QOM'ified yet, i.e. cpu_state_reset() will not forward to
CPUClass::reset().

Update cpu_mips_init() with cpu_reset() nontheless, indirectly calling
cpu_state_reset(), so that generic code can be converted to call
cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>

r2d: Store SuperHCPU in ResetData

Allows us to use cpu_reset() in place of cpu_state_reset() in
main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>

r2d: Use cpu_sh4_init() to obtain SuperHCPU

Needed for main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>

target-sh4: Let cpu_sh4_init() return SuperHCPU

Turn cpu_init macro into a static inline function returning
CPUSH4State for backwards compatibility.

Signed-off-by: Andreas Färber <afaerber@suse.de>

pc: Pass X86CPU to pc_cpu_reset()

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

pc: Use cpu_x86_init() to obtain X86CPU

Needed for pc_cpu_reset().

Also change return type to X86CPU.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

target-i386: Let cpu_x86_init() return X86CPU

Turn cpu_init macro into a static inline function returning CPUX86State
for backwards compatibility.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

target-i386: Pass X86CPU to do_cpu_{init,sipi}()

Allows to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

microblaze_boot: Pass MicroBlazeCPU to microblaze_load_kernel()

Allows us to use cpu_reset() in place of cpu_state_reset() in
main_cpu_reset().

Also pass it through to its reset callbacks, while at it.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

petalogix_s3adsp1800_mmu: Use cpu_mb_init() to obtain MicroBlazeCPU

Needed for microblaze_load_kernel().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

petalogix_ml605: Use cpu_mb_init() to obtain MicroBlazeCPU

Needed for microblaze_load_kernel().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

target-microblaze: Let cpu_mb_init() return MicroBlazeCPU

Since qemu_init_vcpu() is no-op for CONFIG_USER_ONLY drop the env
variable that is now unused there.

Turn cpu_init macro into a static inline function returning CPUMBState
for backwards compatibility.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

cris-boot: Pass CRISCPU to main_cpu_reset().

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

cris-boot: Pass CRISCPU to cris_load_image()

Needed for main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

axis_dev88: Use cpu_cris_init() to obtain CRISCPU

Needed for cris_load_image().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

target-cris: Let cpu_cris_init() return CRISCPU

Turn cpu_init macro into a static inline function returning CPUCRISState
for backwards compatibility.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

target-cris: Reindent cpu_cris_init()

Judging by TCG variable initialization it used 8-char tabs; use 4 spaces
instead. Also remove trailing whitespace.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

xtensa_lx60: Pass XtensaCPU to lx60_reset()

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>

xtensa_lx60: Use cpu_xtensa_init() to obtain XtensaCPU

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>

xtensa_sim: Pass XtensaCPU to sim_reset()

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>

xtensa_sim: Use cpu_xtensa_init() to obtain XtensaCPU

Needed for sim_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>

target-xtensa: Let cpu_xtensa_init() return XtensaCPU

Make the include paths for cpu-qom.h consistent to allow using XtensaCPU
in cpu.h.

Turn cpu_init macro into a static inline function returning
CPUXtensaState for backwards compatibility.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>

milkymist: Store LM32 in ResetInfo

Allows us to use cpu_reset() in place of cpu_state_reset() in
main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc>

milkymist: Use cpu_lm32_init() to obtain LM32CPU

Needed for main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc>

lm32_boards: Store LM32CPU in ResetInfo

Allows us to use cpu_reset() in place of cpu_state_reset() in
main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc>

lm32_boards: Use cpu_lm32_init() to obtain LM32CPU

Needed for main_cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc>

target-lm32: Let cpu_lm32_init() return LM32CPU

Make the include paths for cpu-qom.h consistent to allow using LM32CPU
in cpu.h.

Turn cpu_init macro into a static inline function returning CPULM32State
for backwards compatibility.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc>

arm_boot: Pass ARMCPU to do_cpu_reset()

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>

armv7m: Pass ARMCPU to armv7m_reset()

Allows us to use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>

armv7m: Use cpu_arm_init() to obtain ARMCPU

Needed for armv7m_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>

omap: Use cpu_arm_init() to store ARMCPU in omap_mpu_state_s

Fix tab indentations of comments, add braces, use cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>

pxa2xx: Use cpu_arm_init() and store ARMCPU

Also use cpu_reset() in place of cpu_state_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Use cpu_reset() in cpu_arm_init()

Commit 3c30dd5a68e9fee6af67cfd0d14ed7520820f36a (target-arm: Move reset
handling to arm_cpu_reset) QOM'ified CPU reset. Complete it by replacing
cpu_state_reset() with cpu_reset().

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>

Add 'query-events' command to QMP to query async events

Sometimes it is neccessary for an application to determine
whether a particular QMP event is available, so they can
decide whether to use compatibility code instead. This
introduces a new 'query-events' command to QMP to do just
that

 { "execute": "query-events" }
 {"return": [{"name": "WAKEUP"},
             {"name": "SUSPEND"},
             {"name": "DEVICE_TRAY_MOVED"},
             {"name": "BLOCK_JOB_CANCELLED"},
             {"name": "BLOCK_JOB_COMPLETED"},
             ...snip...
             {"name": "SHUTDOWN"}]}

* monitor.c: Turn MonitorEvent -> string conversion
  into a lookup from a static table of constant strings.
  Add impl of qmp_query_events monitor command handler
* qapi-schema.json, qmp-commands.hx: Define contract of
  query-events command

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>

qapi: convert netdev_del

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>

qapi: convert netdev_add

This is not a full QAPI conversion, but an intermediate step.

In essence, do_netdev_add() is split into three functions:

 1. netdev_add(): performs the actual work. This function is fully
    converted to Error (thus, it's "qapi-friendly")

 2. qmp_netdev_add(): the QMP front-end for netdev_add(). This is
    coded by hand and not auto-generated (gen=no in the schema). The
    reason for this it's a lot easier and simpler to with QemuOpts
    this way

 3. hmp_netdev_add(): HMP front-end.

This design was suggested by Paolo Bonzini.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>

net: net_client_init(): use error_set()

Callers are changed to use qerror_report_err() to keep their QError
semantics.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>

net: purge the monitor object from all init functions

The only backend that really uses it is the socket one, which calls
monitor_get_fd(). But it can use 'cur_mon' instead.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>

qemu-config: introduce qemu_find_opts_err()

This is like qemu_find_opts(), except that it takes an Error argument.

This new function allows for a incremental conversion of code using
qemu_find_opts().

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>

qemu-config: find_list(): use error_set()

Note that qemu_find_opts() and qemu_config_parse() need to call
error_report() to maintain their semantics on error.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>

qerror: introduce QERR_INVALID_OPTION_GROUP

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>