Luca Abeni [Thu, 18 May 2017 20:13:33 +0000 (22:13 +0200)]
sched/deadline: Make GRUB a task's flag
This patch introduces the SCHED_FLAG_RECLAIM flag to specify
that a DL task is allowed to reclaim unused CPU time (using
the GRUB algorithm).
Tested-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Luca Abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Claudio Scordino <claudio@evidence.eu.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/1495138417-6203-7-git-send-email-luca.abeni@santannapisa.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Luca Abeni [Thu, 18 May 2017 20:13:32 +0000 (22:13 +0200)]
sched/deadline: Do not reclaim the whole CPU bandwidth
Original GRUB tends to reclaim 100% of the CPU time... And this
allows a CPU hog to starve non-deadline tasks.
To address this issue, allow the scheduler to reclaim only a
specified fraction of CPU time, stored in the new "bw_ratio"
field of the dl runqueue structure.
Tested-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Luca Abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Claudio Scordino <claudio@evidence.eu.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/1495138417-6203-6-git-send-email-luca.abeni@santannapisa.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Luca Abeni [Thu, 18 May 2017 20:13:31 +0000 (22:13 +0200)]
sched/deadline: Implement GRUB accounting
According to the GRUB (Greedy Reclaimation of Unused Bandwidth)
reclaiming algorithm, the runtime is not decreased as "dq = -dt",
but as "dq = -Uact dt" (where Uact is the per-runqueue active
utilization).
Hence, this commit modifies the runtime accounting rule in
update_curr_dl() to implement the GRUB rule.
Tested-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Luca Abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Claudio Scordino <claudio@evidence.eu.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/1495138417-6203-5-git-send-email-luca.abeni@santannapisa.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Luca Abeni [Thu, 18 May 2017 20:13:30 +0000 (22:13 +0200)]
sched/deadline: Fix the update of the total -deadline utilization
Now that the inactive timer can be armed to fire at the 0-lag time,
it is possible to use inactive_task_timer() to update the total
-deadline utilization (dl_b->total_bw) at the correct time, fixing
dl_overflow() and __setparam_dl().
Tested-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Luca Abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Claudio Scordino <claudio@evidence.eu.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/1495138417-6203-4-git-send-email-luca.abeni@santannapisa.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Luca Abeni [Thu, 18 May 2017 20:13:29 +0000 (22:13 +0200)]
sched/deadline: Improve the tracking of active utilization
This patch implements a more theoretically sound algorithm for
tracking active utilization: instead of decreasing it when a
task blocks, use a timer (the "inactive timer", named after the
"Inactive" task state of the GRUB algorithm) to decrease the
active utilization at the so called "0-lag time".
Tested-by: Claudio Scordino <claudio@evidence.eu.com>
Tested-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Luca Abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/1495138417-6203-3-git-send-email-luca.abeni@santannapisa.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Luca Abeni [Thu, 18 May 2017 20:13:28 +0000 (22:13 +0200)]
sched/deadline: Track the active utilization
Active utilization is defined as the total utilization of active
(TASK_RUNNING) tasks queued on a runqueue. Hence, it is increased
when a task wakes up and is decreased when a task blocks.
When a task is migrated from CPUi to CPUj, immediately subtract the
task's utilization from CPUi and add it to CPUj. This mechanism is
implemented by modifying the pull and push functions.
Note: this is not fully correct from the theoretical point of view
(the utilization should be removed from CPUi only at the 0 lag
time), a more theoretically sound solution is presented in the
next patches.
Tested-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Luca Abeni <luca.abeni@unitn.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@arm.com>
Cc: Claudio Scordino <claudio@evidence.eu.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/1495138417-6203-2-git-send-email-luca.abeni@santannapisa.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 17 May 2017 10:53:50 +0000 (12:53 +0200)]
sched/core: Implement new approach to scale select_idle_cpu()
Hackbench recently suffered a bunch of pain, first by commit:
4c77b18cf8b7 ("sched/fair: Make select_idle_cpu() more aggressive")
and then by commit:
c743f0a5c50f ("sched/fair, cpumask: Export for_each_cpu_wrap()")
which fixed a bug in the initial for_each_cpu_wrap() implementation
that made select_idle_cpu() even more expensive. The bug was that it
would skip over CPUs when bits were consequtive in the bitmask.
This however gave me an idea to fix select_idle_cpu(); where the old
scheme was a cliff-edge throttle on idle scanning, this introduces a
more gradual approach. Instead of stopping to scan entirely, we limit
how many CPUs we scan.
Initial benchmarks show that it mostly recovers hackbench while not
hurting anything else, except Mason's schbench, but not as bad as the
old thing.
It also appears to recover the tbench high-end, which also suffered like
hackbench.
Tested-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Cc: kitsunyan <kitsunyan@inbox.ru>
Cc: linux-kernel@vger.kernel.org
Cc: lvenanci@redhat.com
Cc: riel@redhat.com
Cc: xiaolong.ye@intel.com
Link: http://lkml.kernel.org/r/20170517105350.hk5m4h4jb6dfr65a@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Perr Zhang [Fri, 2 Jun 2017 03:59:53 +0000 (11:59 +0800)]
sched/header: Remove leftover, obsolete comment
There is no more set_task_vxid() helper, remove its description.
Signed-off-by: Perr Zhang <strongbox8@zoho.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170602035953.28949-1-strongbox8@zoho.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 24 May 2017 06:52:02 +0000 (08:52 +0200)]
sched/clock: Fix early boot preempt assumption in __set_sched_clock_stable()
The more strict early boot preemption warnings found that
__set_sched_clock_stable() was incorrectly assuming we'd still be
running on a single CPU:
BUG: using smp_processor_id() in preemptible [
00000000] code: swapper/0/1
caller is debug_smp_processor_id+0x1c/0x1e
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc2-00108-g1c3c5ea #1
Call Trace:
dump_stack+0x110/0x192
check_preemption_disabled+0x10c/0x128
? set_debug_rodata+0x25/0x25
debug_smp_processor_id+0x1c/0x1e
sched_clock_init_late+0x27/0x87
[...]
Fix it by disabling IRQs.
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: lkp@01.org
Cc: tipbuild@zytor.com
Link: http://lkml.kernel.org/r/20170524065202.v25vyu7pvba5mhpd@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnd Bergmann [Wed, 17 May 2017 20:39:24 +0000 (22:39 +0200)]
x86/tsc: Fold set_cyc2ns_scale() into caller
The newly introduced wrapper function only has one caller,
and this one is conditional, causing a harmless warning when
CONFIG_CPU_FREQ is disabled:
arch/x86/kernel/tsc.c:189:13: error: 'set_cyc2ns_scale' defined but not used [-Werror=unused-function]
My first idea was to move the wrapper inside of that #ifdef,
but on second thought it seemed nicer to remove it completely
again and rename __set_cyc2ns_scale back to set_cyc2ns_scale,
but leaving the extra argument.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
615cd03373a0 ("x86/tsc: Fix sched_clock() sync")
Link: http://lkml.kernel.org/r/20170517203949.2052220-1-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:48 +0000 (20:42 +0200)]
sched/core: Enable might_sleep() and smp_processor_id() checks early
might_sleep() and smp_processor_id() checks are enabled after the boot
process is done. That hides bugs in the SMP bringup and driver
initialization code.
Enable it right when the scheduler starts working, i.e. when init task and
kthreadd have been created and right before the idle task enables
preemption.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170516184736.272225698@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:47 +0000 (20:42 +0200)]
init: Introduce SYSTEM_SCHEDULING state
might_sleep() debugging and smp_processor_id() debugging should be active
right after the scheduler starts working. The init task can invoke
smp_processor_id() from preemptible context as it is pinned on the boot cpu
until sched_smp_init() removes the pinning and lets it schedule on all non
isolated cpus.
Add a new state which allows to enable those checks earlier and add it to
the xen do_poweroff() function.
No functional change.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170516184736.196214622@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:46 +0000 (20:42 +0200)]
mm/vmscan: Adjust system_state checks
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in kswapd_run() to handle the extra states.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170516184736.119158930@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:45 +0000 (20:42 +0200)]
printk: Adjust system_state checks
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in boot_delay_msec() to handle the extra
states.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170516184736.027534895@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:44 +0000 (20:42 +0200)]
extable: Adjust system_state checks
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in core_kernel_text() to handle the extra
states, i.e. to cover init text up to the point where the system switches
to state RUNNING.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170516184735.949992741@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:43 +0000 (20:42 +0200)]
async: Adjust system_state checks
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in async_run_entry_fn() and
async_synchronize_cookie_domain() to handle the extra states.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170516184735.865155020@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:42 +0000 (20:42 +0200)]
iommu/of: Adjust system_state check
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in of_iommu_driver_present() to handle the
extra states.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20170516184735.788023442@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:41 +0000 (20:42 +0200)]
iommu/vt-d: Adjust system_state checks
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state checks in dmar_parse_one_atsr() and
dmar_iommu_notify_scope_dev() to handle the extra states.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Joerg Roedel <joro@8bytes.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20170516184735.712365947@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:40 +0000 (20:42 +0200)]
cpufreq/pasemi: Adjust system_state check
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in pas_cpufreq_cpu_exit() to handle the extra
states.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170516184735.620023128@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:39 +0000 (20:42 +0200)]
mm: Adjust system_state check
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
get_nid_for_pfn() checks for system_state == BOOTING to decide whether to
use early_pfn_to_nid() when CONFIG_DEFERRED_STRUCT_PAGE_INIT=y.
That check is dubious, because the switch to state RUNNING happes way after
page_alloc_init_late() has been invoked.
Change the check to less than RUNNING state so it covers the new
intermediate states as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170516184735.528279534@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:38 +0000 (20:42 +0200)]
ACPI: Adjust system_state check
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Make the decision whether a pci root is hotplugged depend on SYSTEM_RUNNING
instead of !SYSTEM_BOOTING. It makes no sense to cover states greater than
SYSTEM_RUNNING as there are not hotplug events on reboot and poweroff.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Link: http://lkml.kernel.org/r/20170516184735.446455652@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:37 +0000 (20:42 +0200)]
powerpc: Adjust system_state check
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in smp_generic_cpu_bootable() to handle the
extra states.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170516184735.359536998@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:36 +0000 (20:42 +0200)]
metag: Adjust system_state check
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in stop_this_cpu() to handle the extra states.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170516184735.283420315@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:35 +0000 (20:42 +0200)]
x86/smp: Adjust system_state check
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in announce_cpu() to handle the extra states.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170516184735.191715856@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:34 +0000 (20:42 +0200)]
arm64: Adjust system_state check
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in smp_send_stop() to handle the extra states.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20170516184735.112589728@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:33 +0000 (20:42 +0200)]
arm: Adjust system_state check
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in ipi_cpu_stop() to handle the extra states.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170516184735.020718977@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Tue, 16 May 2017 18:42:32 +0000 (20:42 +0200)]
init: Pin init task to the boot CPU, initially
Some of the boot code in init_kernel_freeable() which runs before SMP
bringup assumes (rightfully) that it runs on the boot CPU and therefore can
use smp_processor_id() in preemptible context.
That works so far because the smp_processor_id() check starts to be
effective after smp bringup. That's just wrong. Starting with SMP bringup
and the ability to move threads around, smp_processor_id() in preemptible
context is broken.
Aside of that it does not make sense to allow init to run on all CPUs
before sched_smp_init() has been run.
Pin the init to the boot CPU so the existing code can continue to use
smp_processor_id() without triggering the checks when the enabling of those
checks starts earlier.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170516184734.943149935@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vlastimil Babka [Mon, 15 May 2017 13:13:16 +0000 (15:13 +0200)]
sched/numa: Use down_read_trylock() for the mmap_sem
A customer has reported a soft-lockup when running an intensive
memory stress test, where the trace on multiple CPU's looks like this:
RIP: 0010:[<
ffffffff810c53fe>]
[<
ffffffff810c53fe>] native_queued_spin_lock_slowpath+0x10e/0x190
...
Call Trace:
[<
ffffffff81182d07>] queued_spin_lock_slowpath+0x7/0xa
[<
ffffffff811bc331>] change_protection_range+0x3b1/0x930
[<
ffffffff811d4be8>] change_prot_numa+0x18/0x30
[<
ffffffff810adefe>] task_numa_work+0x1fe/0x310
[<
ffffffff81098322>] task_work_run+0x72/0x90
Further investigation showed that the lock contention here is pmd_lock().
The task_numa_work() function makes sure that only one thread is let to perform
the work in a single scan period (via cmpxchg), but if there's a thread with
mmap_sem locked for writing for several periods, multiple threads in
task_numa_work() can build up a convoy waiting for mmap_sem for read and then
all get unblocked at once.
This patch changes the down_read() to the trylock version, which prevents the
build up. For a workload experiencing mmap_sem contention, it's probably better
to postpone the NUMA balancing work anyway. This seems to have fixed the soft
lockups involving pmd_lock(), which is in line with the convoy theory.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170515131316.21909-1-vbabka@suse.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dave Kleikamp [Mon, 15 May 2017 19:14:13 +0000 (14:14 -0500)]
sched/rt: Minimize rq->lock contention in do_sched_rt_period_timer()
With CONFIG_RT_GROUP_SCHED=y, do_sched_rt_period_timer() sequentially
takes each CPU's rq->lock. On a large, busy system, the cumulative time it
takes to acquire each lock can be excessive, even triggering a watchdog
timeout.
If rt_rq->rt_time and rt_rq->rt_nr_running are both zero, this function does
nothing while holding the lock, so don't bother taking it at all.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a767637b-df85-912f-ba69-c90ee00a3fb6@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Steven Rostedt (VMware) [Thu, 9 Mar 2017 15:18:42 +0000 (10:18 -0500)]
sched/core: Allow __sched_setscheduler() in interrupts when PI is not used
When priority inheritance was added back in 2.6.18 to sched_setscheduler(), it
added a path to taking an rt-mutex wait_lock, which is not IRQ safe. As PI
is not a common occurrence, lockdep will likely never trigger if
sched_setscheduler was called from interrupt context. A BUG_ON() was added
to trigger if __sched_setscheduler() was ever called from interrupt context
because there was a possibility to take the wait_lock.
Today the wait_lock is irq safe, but the path to taking it in
sched_setscheduler() is the same as the path to taking it from normal
context. The wait_lock is taken with raw_spin_lock_irq() and released with
raw_spin_unlock_irq() which will indiscriminately enable interrupts,
which would be bad in interrupt context.
The problem is that normalize_rt_tasks, which is called by triggering the
sysrq nice-all-RT-tasks was changed to call __sched_setscheduler(), and this
is done from interrupt context!
Now __sched_setscheduler() takes a "pi" parameter that is used to know if
the priority inheritance should be called or not. As the BUG_ON() only cares
about calling the PI code, it should only bug if called from interrupt
context with the "pi" parameter set to true.
Reported-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
dbc7f069b93a ("sched: Use replace normalize_task() with __sched_setscheduler()")
Link: http://lkml.kernel.org/r/20170308124654.10e598f2@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Byungchul Park [Fri, 12 May 2017 01:05:59 +0000 (10:05 +0900)]
sched/deadline: Remove unnecessary condition in push_dl_task()
pick_next_pushable_dl_task(rq) has BUG_ON(rq->cpu != task_cpu(task))
when it returns a task other than NULL, which means that task_cpu(task)
must be rq->cpu. So if task == next_task, then task_cpu(next_task) must
be rq->cpu as well. Remove the redundant condition and make the code simpler.
This way one unnecessary branch and two LOAD operations can be avoided.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Juri Lelli <juri.lelli@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: <kernel-team@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1494551159-22367-1-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Byungchul Park [Fri, 12 May 2017 01:05:43 +0000 (10:05 +0900)]
sched/rt: Remove unnecessary condition in push_rt_task()
pick_next_pushable_task(rq) has BUG_ON(rq_cpu != task_cpu(task)) when
it returns a task other than NULL, which means that task_cpu(task) must
be rq->cpu. So if task == next_task, then task_cpu(next_task) must be
rq->cpu as well. Remove the redundant condition and make the code simpler.
This way one unnecessary branch and two LOAD operations can be avoided.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Juri Lelli <juri.lelli@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: <kernel-team@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1494551143-22219-1-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Byungchul Park [Fri, 12 May 2017 00:39:44 +0000 (09:39 +0900)]
sched/core: Use the new llist_for_each_entry_safe() primitive
Now that we've added llist_for_each_entry_safe(), use it to simplify
an open coded version of it in sched_ttwu_pending().
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <kernel-team@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1494549584-11730-1-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Byungchul Park [Fri, 12 May 2017 00:36:56 +0000 (09:36 +0900)]
llist: Provide a safe version for llist_for_each()
Sometimes we have to dereference next field of llist node before entering
loop becasue the node might be deleted or the next field might be
modified within the loop. So this adds the safe version of llist_for_each(),
that is, llist_for_each_safe().
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Huang, Ying <ying.huang@intel.com>
Cc: <kernel-team@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1494549416-10539-1-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Fri, 19 May 2017 10:58:25 +0000 (12:58 +0200)]
smp, cpumask: Use non-atomic cpumask_{set,clear}_cpu()
The cpumasks in smp_call_function_many() are private and not subject
to concurrency, atomic bitops are pointless and expensive.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Aaron Lu [Fri, 19 May 2017 07:53:31 +0000 (15:53 +0800)]
smp: Avoid sending needless IPI in smp_call_function_many()
Inter-Processor-Interrupt(IPI) is needed when a page is unmapped and the
process' mm_cpumask() shows the process has ever run on other CPUs. page
migration, page reclaim all need IPIs. The number of IPI needed to send
to different CPUs is especially large for multi-threaded workload since
mm_cpumask() is per process.
For smp_call_function_many(), whenever a CPU queues a CSD to a target
CPU, it will send an IPI to let the target CPU to handle the work.
This isn't necessary - we need only send IPI when queueing a CSD
to an empty call_single_queue.
The reason:
flush_smp_call_function_queue() that is called upon a CPU receiving an
IPI will empty the queue and then handle all of the CSDs there. So if
the target CPU's call_single_queue is not empty, we know that:
i. An IPI for the target CPU has already been sent by 'previous queuers';
ii. flush_smp_call_function_queue() hasn't emptied that CPU's queue yet.
Thus, it's safe for us to just queue our CSD there without sending an
addtional IPI. And for the 'previous queuers', we can limit it to the
first queuer.
To demonstrate the effect of this patch, a multi-thread workload that
spawns 80 threads to equally consume 100G memory is used. This is tested
on a 2 node broadwell-EP which has 44cores/88threads and 32G memory. So
after 32G memory is used up, page reclaiming starts to happen a lot.
With this patch, IPI number dropped 88% and throughput increased about
15% for the above workload.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20170519075331.GE2084@aaronlu.sh.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Tue, 23 May 2017 07:50:35 +0000 (09:50 +0200)]
Merge branch 'linus' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Tue, 23 May 2017 04:30:20 +0000 (21:30 -0700)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a regression in the skcipher interface that allows bogus
key parameters to hit underlying implementations which can cause
crashes"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: skcipher - Add missing API setkey checks
Linus Torvalds [Tue, 23 May 2017 02:31:07 +0000 (19:31 -0700)]
Merge tag 'pstore-v4.12-rc3' of git://git./linux/kernel/git/kees/linux
Pull pstore fix from Kees Cook:
"Marta noticed another misbehavior in EFI pstore, which this fixes.
Hopefully this is the last of the v4.12 fixes for pstore!"
* tag 'pstore-v4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
efi-pstore: Fix write/erase id tracking
Linus Torvalds [Tue, 23 May 2017 02:26:33 +0000 (19:26 -0700)]
Merge tag 'acpi-4.12-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert a 4.11 change that turned out to be problematic and add a
.gitignore file.
Specifics:
- Revert a 4.11 commit related to the ACPI-based handling of laptop
lids that made changes incompatible with existing user space stacks
and broke things there (Lv Zheng).
- Add .gitignore to the ACPI tools directory (Prarit Bhargava)"
* tag 'acpi-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI / button: Remove lid_init_state=method mode"
tools/power/acpi: Add .gitignore file
Linus Torvalds [Tue, 23 May 2017 02:24:32 +0000 (19:24 -0700)]
Merge tag 'pm-4.12-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix RTC wakeup from suspend-to-idle broken recently, fix CPU
idleness detection condition in the schedutil cpufreq governor, fix a
cpufreq driver build failure, fix an error code path in the power
capping framework, clean up the hibernate core and update the
intel_pstate documentation.
Specifics:
- Fix RTC wakeup from suspend-to-idle broken by the recent rework of
ACPI wakeup handling (Rafael Wysocki).
- Update intel_pstate driver documentation to reflect the current
code and explain how it works in more detail (Rafael Wysocki).
- Fix an issue related to CPU idleness detection on systems with
shared cpufreq policies in the schedutil governor (Juri Lelli).
- Fix a possible build issue in the dbx500 cpufreq driver (Arnd
Bergmann).
- Fix a function in the power capping framework core to return an
error code instead of 0 when there's an error (Dan Carpenter).
- Clean up variable definition in the hibernation core (Pushkar
Jambhlekar)"
* tag 'pm-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: dbx500: add a Kconfig symbol
PM / hibernate: Declare variables as static
PowerCap: Fix an error code in powercap_register_zone()
RTC: rtc-cmos: Fix wakeup from suspend-to-idle
PM / wakeup: Fix up wakeup_source_report_event()
cpufreq: intel_pstate: Document the current behavior and user interface
cpufreq: schedutil: use now as reference when aggregating shared policy requests
Jan Kiszka [Mon, 22 May 2017 05:46:55 +0000 (07:46 +0200)]
i2c: designware: Fix bogus sda_hold_time due to uninitialized vars
We need to initializes those variables to 0 for platforms that do not
provide ACPI parameters. Otherwise, we set sda_hold_time to random
values, breaking e.g. Galileo and IOT2000 boards.
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Fixes:
9d6408433019 ("i2c: designware: don't infer timings described by ACPI from clock rate")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Thu, 18 May 2017 20:07:49 +0000 (13:07 -0700)]
efi-pstore: Fix write/erase id tracking
Prior to the pstore interface refactoring, the "id" generated during
a backend pstore_write() was only retained by the internal pstore
inode tracking list. Additionally the "part" was ignored, so EFI
would encode this in the id. This corrects the misunderstandings
and correctly sets "id" during pstore_write(), and uses "part"
directly during pstore_erase().
Reported-by: Marta Lofstedt <marta.lofstedt@intel.com>
Fixes:
76cc9580e3fb ("pstore: Replace arguments for write() API")
Fixes:
a61072aae693 ("pstore: Replace arguments for erase() API")
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Marta Lofstedt <marta.lofstedt@intel.com>
Linus Torvalds [Mon, 22 May 2017 19:42:02 +0000 (12:42 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"Mostly netfilter bug fixes in here, but we have some bits elsewhere as
well.
1) Don't do SNAT replies for non-NATed connections in IPVS, from
Julian Anastasov.
2) Don't delete conntrack helpers while they are still in use, from
Liping Zhang.
3) Fix zero padding in xtables's xt_data_to_user(), from Willem de
Bruijn.
4) Add proper RCU protection to nf_tables_dump_set() because we
cannot guarantee that we hold the NFNL_SUBSYS_NFTABLES lock. From
Liping Zhang.
5) Initialize rcv_mss in tcp_disconnect(), from Wei Wang.
6) smsc95xx devices can't handle IPV6 checksums fully, so don't
advertise support for offloading them. From Nisar Sayed.
7) Fix out-of-bounds access in __ip6_append_data(), from Eric
Dumazet.
8) Make atl2_probe() propagate the error code properly on failures,
from Alexey Khoroshilov.
9) arp_target[] in bond_check_params() is used uninitialized. This
got changes from a global static to a local variable, which is how
this mistake happened. Fix from Jarod Wilson.
10) Fix fallout from unnecessary NULL check removal in cls_matchall,
from Jiri Pirko. This is definitely brown paper bag territory..."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
net: sched: cls_matchall: fix null pointer dereference
vsock: use new wait API for vsock_stream_sendmsg()
bonding: fix randomly populated arp target array
net: Make IP alignment calulations clearer.
bonding: fix accounting of active ports in 3ad
net: atheros: atl2: don't return zero on failure path in atl2_probe()
ipv6: fix out of bound writes in __ip6_append_data()
bridge: start hello_timer when enabling KERNEL_STP in br_stp_start
smsc95xx: Support only IPv4 TCP/UDP csum offload
arp: always override existing neigh entries with gratuitous ARP
arp: postpone addr_type calculation to as late as possible
arp: decompose is_garp logic into a separate function
arp: fixed error in a comment
tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0
netfilter: xtables: fix build failure from COMPAT_XT_ALIGN outside CONFIG_COMPAT
ebtables: arpreply: Add the standard target sanity check
netfilter: nf_tables: revisit chain/object refcounting from elements
netfilter: nf_tables: missing sanitization in data from userspace
netfilter: nf_tables: can't assume lock is acquired when dumping set elems
netfilter: synproxy: fix conntrackd interaction
...
Jiri Pirko [Mon, 22 May 2017 14:46:13 +0000 (16:46 +0200)]
net: sched: cls_matchall: fix null pointer dereference
Since the head is guaranteed by the check above to be null, the call_rcu
would explode. Remove the previously logically dead code that was made
logically very much alive and kicking.
Fixes:
985538eee06f ("net/sched: remove redundant null check on head")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Fri, 19 May 2017 18:21:59 +0000 (11:21 -0700)]
vsock: use new wait API for vsock_stream_sendmsg()
As reported by Michal, vsock_stream_sendmsg() could still
sleep at vsock_stream_has_space() after prepare_to_wait():
vsock_stream_has_space
vmci_transport_stream_has_space
vmci_qpair_produce_free_space
qp_lock
qp_acquire_queue_mutex
mutex_lock
Just switch to the new wait API like we did for commit
d9dc8b0f8b4e ("net: fix sleeping for sk_wait_event()").
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jarod Wilson [Fri, 19 May 2017 18:46:46 +0000 (14:46 -0400)]
bonding: fix randomly populated arp target array
In commit
dc9c4d0fe023, the arp_target array moved from a static global
to a local variable. By the nature of static globals, the array used to
be initialized to all 0. At present, it's full of random data, which
that gets interpreted as arp_target values, when none have actually been
specified. Systems end up booting with spew along these lines:
[ 32.161783] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[ 32.168475] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[ 32.175089] 8021q: adding VLAN 0 to HW filter on device lacp0
[ 32.193091] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[ 32.204892] lacp0: Setting MII monitoring interval to 100
[ 32.211071] lacp0: Removing ARP target 216.124.228.17
[ 32.216824] lacp0: Removing ARP target 218.160.255.255
[ 32.222646] lacp0: Removing ARP target 185.170.136.184
[ 32.228496] lacp0: invalid ARP target 255.255.255.255 specified for removal
[ 32.236294] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[ 32.243987] lacp0: Removing ARP target 56.125.228.17
[ 32.249625] lacp0: Removing ARP target 218.160.255.255
[ 32.255432] lacp0: Removing ARP target 15.157.233.184
[ 32.261165] lacp0: invalid ARP target 255.255.255.255 specified for removal
[ 32.268939] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[ 32.276632] lacp0: Removing ARP target 16.0.0.0
[ 32.281755] lacp0: Removing ARP target 218.160.255.255
[ 32.287567] lacp0: Removing ARP target 72.125.228.17
[ 32.293165] lacp0: Removing ARP target 218.160.255.255
[ 32.298970] lacp0: Removing ARP target 8.125.228.17
[ 32.304458] lacp0: Removing ARP target 218.160.255.255
None of these were actually specified as ARP targets, and the driver does
seem to clean up the mess okay, but it's rather noisy and confusing, leaks
values to userspace, and the 255.255.255.255 spew shows up even when debug
prints are disabled.
The fix: just zero out arp_target at init time.
While we're in here, init arp_all_targets_value in the right place.
Fixes:
dc9c4d0fe023 ("bonding: reduce scope of some global variables")
CC: Mahesh Bandewar <maheshb@google.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: netdev@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafael J. Wysocki [Mon, 22 May 2017 18:32:05 +0000 (20:32 +0200)]
Merge branches 'pm-sleep' and 'powercap'
* pm-sleep:
PM / hibernate: Declare variables as static
RTC: rtc-cmos: Fix wakeup from suspend-to-idle
PM / wakeup: Fix up wakeup_source_report_event()
* powercap:
PowerCap: Fix an error code in powercap_register_zone()
Rafael J. Wysocki [Mon, 22 May 2017 18:29:06 +0000 (20:29 +0200)]
Merge branches 'acpi-button' and 'acpi-tools'
* acpi-button:
Revert "ACPI / button: Remove lid_init_state=method mode"
* acpi-tools:
tools/power/acpi: Add .gitignore file
Rafael J. Wysocki [Mon, 22 May 2017 18:28:22 +0000 (20:28 +0200)]
Merge branches 'intel_pstate', 'pm-cpufreq' and 'pm-cpufreq-sched'
* intel_pstate:
cpufreq: intel_pstate: Document the current behavior and user interface
* pm-cpufreq:
cpufreq: dbx500: add a Kconfig symbol
* pm-cpufreq-sched:
cpufreq: schedutil: use now as reference when aggregating shared policy requests
David S. Miller [Mon, 22 May 2017 16:27:07 +0000 (12:27 -0400)]
net: Make IP alignment calulations clearer.
The assignmnet:
ip_align = strict ? 2 : NET_IP_ALIGN;
in compare_pkt_ptr_alignment() trips up Coverity because we can only
get to this code when strict is true, therefore ip_align will always
be 2 regardless of NET_IP_ALIGN's value.
So just assign directly to '2' and explain the situation in the
comment above.
Reported-by: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jarod Wilson [Fri, 19 May 2017 23:43:45 +0000 (19:43 -0400)]
bonding: fix accounting of active ports in 3ad
As of
7bb11dc9f59d and
0622cab0341c, bond slaves in a 3ad bond are not
removed from the aggregator when they are down, and the active slave count
is NOT equal to number of ports in the aggregator, but rather the number
of ports in the aggregator that are still enabled. The sysfs spew for
bonding_show_ad_num_ports() has a comment that says "Show number of active
802.3ad ports.", but it's currently showing total number of ports, both
active and inactive. Remedy it by using the same logic introduced in
0622cab0341c in __bond_3ad_get_active_agg_info(), so sysfs, procfs and
netlink all report the number of active ports. Note that this means that
IFLA_BOND_AD_INFO_NUM_PORTS really means NUM_ACTIVE_PORTS instead of
NUM_PORTS, and thus perhaps should be renamed for clarity.
Lightly tested on a dual i40e lacp bond, simulating link downs with an ip
link set dev <slave2> down, was able to produce the state where I could
see both in the same aggregator, but a number of ports count of 1.
MII Status: up
Active Aggregator Info:
Aggregator ID: 1
Number of ports: 2 <---
Slave Interface: ens10
MII Status: up <---
Aggregator ID: 1
Slave Interface: ens11
MII Status: up
Aggregator ID: 1
MII Status: up
Active Aggregator Info:
Aggregator ID: 1
Number of ports: 1 <---
Slave Interface: ens10
MII Status: down <---
Aggregator ID: 1
Slave Interface: ens11
MII Status: up
Aggregator ID: 1
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Khoroshilov [Fri, 19 May 2017 22:52:11 +0000 (01:52 +0300)]
net: atheros: atl2: don't return zero on failure path in atl2_probe()
If dma mask checks fail in atl2_probe(), it breaks off initialization,
deallocates all resources, but returns zero.
The patch adds proper error code return value and
make error code setup unified.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 19 May 2017 21:17:48 +0000 (14:17 -0700)]
ipv6: fix out of bound writes in __ip6_append_data()
Andrey Konovalov and idaifish@gmail.com reported crashes caused by
one skb shared_info being overwritten from __ip6_append_data()
Andrey program lead to following state :
copy -4200 datalen 2000 fraglen 2040
maxfraglen 2040 alloclen 2048 transhdrlen 0 offset 0 fraggap 6200
The skb_copy_and_csum_bits(skb_prev, maxfraglen, data + transhdrlen,
fraggap, 0); is overwriting skb->head and skb_shared_info
Since we apparently detect this rare condition too late, move the
code earlier to even avoid allocating skb and risking crashes.
Once again, many thanks to Andrey and syzkaller team.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: <idaifish@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 22 May 2017 02:30:23 +0000 (19:30 -0700)]
Linux 4.12-rc2
Linus Torvalds [Mon, 22 May 2017 01:26:54 +0000 (18:26 -0700)]
x86: fix 32-bit case of __get_user_asm_u64()
The code to fetch a 64-bit value from user space was entirely buggered,
and has been since the code was merged in early 2016 in commit
b2f680380ddf ("x86/mm/32: Add support for 64-bit __get_user() on 32-bit
kernels").
Happily the buggered routine is almost certainly entirely unused, since
the normal way to access user space memory is just with the non-inlined
"get_user()", and the inlined version didn't even historically exist.
The normal "get_user()" case is handled by external hand-written asm in
arch/x86/lib/getuser.S that doesn't have either of these issues.
There were two independent bugs in __get_user_asm_u64():
- it still did the STAC/CLAC user space access marking, even though
that is now done by the wrapper macros, see commit
11f1a4b9755f
("x86: reorganize SMAP handling in user space accesses").
This didn't result in a semantic error, it just means that the
inlined optimized version was hugely less efficient than the
allegedly slower standard version, since the CLAC/STAC overhead is
quite high on modern Intel CPU's.
- the double register %eax/%edx was marked as an output, but the %eax
part of it was touched early in the asm, and could thus clobber other
inputs to the asm that gcc didn't expect it to touch.
In particular, that meant that the generated code could look like
this:
mov (%eax),%eax
mov 0x4(%eax),%edx
where the load of %edx obviously was _supposed_ to be from the 32-bit
word that followed the source of %eax, but because %eax was
overwritten by the first instruction, the source of %edx was
basically random garbage.
The fixes are trivial: remove the extraneous STAC/CLAC entries, and mark
the 64-bit output as early-clobber to let gcc know that no inputs should
alias with the output register.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org # v4.8+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 21 May 2017 22:25:46 +0000 (15:25 -0700)]
Clean up x86 unsafe_get/put_user() type handling
Al noticed that unsafe_put_user() had type problems, and fixed them in
commit
a7cc722fff0b ("fix unsafe_put_user()"), which made me look more
at those functions.
It turns out that unsafe_get_user() had a type issue too: it limited the
largest size of the type it could handle to "unsigned long". Which is
fine with the current users, but doesn't match our existing normal
get_user() semantics, which can also handle "u64" even when that does
not fit in a long.
While at it, also clean up the type cast in unsafe_put_user(). We
actually want to just make it an assignment to the expected type of the
pointer, because we actually do want warnings from types that don't
convert silently. And it makes the code more readable by not having
that one very long and complex line.
[ This patch might become stable material if we ever end up back-porting
any new users of the unsafe uaccess code, but as things stand now this
doesn't matter for any current existing uses. ]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 21 May 2017 19:06:44 +0000 (12:06 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull misc uaccess fixes from Al Viro:
"Fix for unsafe_put_user() (no callers currently in mainline, but
anyone starting to use it will step into that) + alpha osf_wait4()
infoleak fix"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
osf_wait4(): fix infoleak
fix unsafe_put_user()
Linus Torvalds [Sun, 21 May 2017 18:52:00 +0000 (11:52 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix:
Prevent idle task from ever being preempted. That makes sure that
synchronize_rcu_tasks() which is ignoring idle task does not pretend
that no task is stuck in preempted state. If that happens and idle was
preempted on a ftrace trampoline the machine crashes due to
inconsistent state"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Call __schedule() from do_idle() without enabling preemption
Linus Torvalds [Sun, 21 May 2017 18:45:26 +0000 (11:45 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of small fixes for the irq subsystem:
- Cure a data ordering problem with chained interrupts
- Three small fixlets for the mbigen irq chip"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Fix chained interrupt data ordering
irqchip/mbigen: Fix the clear register offset calculation
irqchip/mbigen: Fix potential NULL dereferencing
irqchip/mbigen: Fix memory mapping code
Xin Long [Fri, 19 May 2017 14:20:29 +0000 (22:20 +0800)]
bridge: start hello_timer when enabling KERNEL_STP in br_stp_start
Since commit
76b91c32dd86 ("bridge: stp: when using userspace stp stop
kernel hello and hold timers"), bridge would not start hello_timer if
stp_enabled is not KERNEL_STP when br_dev_open.
The problem is even if users set stp_enabled with KERNEL_STP later,
the timer will still not be started. It causes that KERNEL_STP can
not really work. Users have to re-ifup the bridge to avoid this.
This patch is to fix it by starting br->hello_timer when enabling
KERNEL_STP in br_stp_start.
As an improvement, it's also to start hello_timer again only when
br->stp_enabled is KERNEL_STP in br_hello_timer_expired, there is
no reason to start the timer again when it's NO_STP.
Fixes:
76b91c32dd86 ("bridge: stp: when using userspace stp stop kernel hello and hold timers")
Reported-by: Haidong Li <haili@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Ivan Vecera <cera@cera.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nisar Sayed [Fri, 19 May 2017 14:00:25 +0000 (14:00 +0000)]
smsc95xx: Support only IPv4 TCP/UDP csum offload
When TX checksum offload is used, if the computed checksum is 0 the
LAN95xx device do not alter the checksum to 0xffff. In the case of ipv4
UDP checksum, it indicates to receiver that no checksum is calculated.
Under ipv6, UDP checksum yields a result of zero must be changed to
0xffff. Hence disabling checksum offload for ipv6 packets.
Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com>
Reported-by: popcorn mix <popcornmix@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 21 May 2017 17:26:46 +0000 (13:26 -0400)]
Merge branch 'arp-always-override-existing-neigh-entries-with-gratuitous-ARP'
Ihar Hrachyshka says:
====================
arp: always override existing neigh entries with gratuitous ARP
This patchset is spurred by discussion started at
https://patchwork.ozlabs.org/patch/760372/ where we figured that there is no
real reason for enforcing override by gratuitous ARP packets only when
arp_accept is 1. Same should happen when it's 0 (the default value).
changelog v2: handled review comments by Julian Anastasov
- fixed a mistake in a comment;
- postponed addr_type calculation to as late as possible.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ihar Hrachyshka [Thu, 18 May 2017 19:41:21 +0000 (12:41 -0700)]
arp: always override existing neigh entries with gratuitous ARP
Currently, when arp_accept is 1, we always override existing neigh
entries with incoming gratuitous ARP replies. Otherwise, we override
them only if new replies satisfy _locktime_ conditional (packets arrive
not earlier than _locktime_ seconds since the last update to the neigh
entry).
The idea behind locktime is to pick the very first (=> close) reply
received in a unicast burst when ARP proxies are used. This helps to
avoid ARP thrashing where Linux would switch back and forth from one
proxy to another.
This logic has nothing to do with gratuitous ARP replies that are
generally not aligned in time when multiple IP address carriers send
them into network.
This patch enforces overriding of existing neigh entries by all incoming
gratuitous ARP packets, irrespective of their time of arrival. This will
make the kernel honour all incoming gratuitous ARP packets.
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ihar Hrachyshka [Thu, 18 May 2017 19:41:20 +0000 (12:41 -0700)]
arp: postpone addr_type calculation to as late as possible
The addr_type retrieval can be costly, so it's worth trying to avoid its
calculation as much as possible. This patch makes it calculated only
for gratuitous ARP packets. This is especially important since later we
may want to move is_garp calculation outside of arp_accept block, at
which point the costly operation will be executed for all setups.
The patch is the result of a discussion in net-dev:
http://marc.info/?l=linux-netdev&m=
149506354216994
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ihar Hrachyshka [Thu, 18 May 2017 19:41:19 +0000 (12:41 -0700)]
arp: decompose is_garp logic into a separate function
The code is quite involving already to earn a separate function for
itself. If anything, it helps arp_process readability.
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ihar Hrachyshka [Thu, 18 May 2017 19:41:18 +0000 (12:41 -0700)]
arp: fixed error in a comment
the is_garp code deals just with gratuitous ARP packets, not every
unsolicited packet.
This patch is a result of a discussion in netdev:
http://marc.info/?l=linux-netdev&m=
149506354216994
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Thu, 18 May 2017 18:22:33 +0000 (11:22 -0700)]
tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0
When tcp_disconnect() is called, inet_csk_delack_init() sets
icsk->icsk_ack.rcv_mss to 0.
This could potentially cause tcp_recvmsg() => tcp_cleanup_rbuf() =>
__tcp_select_window() call path to have division by 0 issue.
So this patch initializes rcv_mss to TCP_MIN_MSS instead of 0.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Al Viro [Mon, 15 May 2017 01:47:25 +0000 (21:47 -0400)]
osf_wait4(): fix infoleak
failing sys_wait4() won't fill struct rusage...
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 21 May 2017 17:08:42 +0000 (13:08 -0400)]
fix unsafe_put_user()
__put_user_size() relies upon its first argument having the same type as what
the second one points to; the only other user makes sure of that and
unsafe_put_user() should do the same.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
David S. Miller [Sun, 21 May 2017 17:00:02 +0000 (13:00 -0400)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree,
they are:
1) When using IPVS in direct-routing mode, normal traffic from the LVS
host to a back-end server is sometimes incorrectly NATed on the way
back into the LVS host. Patch to fix this from Julian Anastasov.
2) Calm down clang compilation warning in ctnetlink due to type
mismatch, from Matthias Kaehlcke.
3) Do not re-setup NAT for conntracks that are already confirmed, this
is fixing a problem that was introduced in the previous nf-next batch.
Patch from Liping Zhang.
4) Do not allow conntrack helper removal from userspace cthelper
infrastructure if already in used. This comes with an initial patch
to introduce nf_conntrack_helper_put() that is required by this fix.
From Liping Zhang.
5) Zero the pad when copying data to userspace, otherwise iptables fails
to remove rules. This is a follow up on the patchset that sorts out
the internal match/target structure pointer leak to userspace. Patch
from the same author, Willem de Bruijn. This also comes with a build
failure when CONFIG_COMPAT is not on, coming in the last patch of
this series.
6) SYNPROXY crashes with conntrack entries that are created via
ctnetlink, more specifically via conntrackd state sync. Patch from
Eric Leblond.
7) RCU safe iteration on set element dumping in nf_tables, from
Liping Zhang.
8) Missing sanitization of immediate date for the bitwise and cmp
expressions in nf_tables.
9) Refcounting logic for chain and objects from set elements does not
integrate into the nf_tables 2-phase commit protocol.
10) Missing sanitization of target verdict in ebtables arpreply target,
from Gao Feng.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 21 May 2017 06:39:03 +0000 (23:39 -0700)]
Merge tag 'trace-v4.12-rc1' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix a bug caused by not cleaning up the new instance unique triggers
when deleting an instance. It also creates a selftest that triggers
that bug.
- Fix the delayed optimization happening after kprobes boot up self
tests being removed by freeing of init memory.
- Comment kprobes on why the delay optimization is not a problem for
removal of modules, to keep other developers from searching that
riddle.
- Fix another case of rcu not watching in stack trace tracing.
* tag 'trace-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Make sure RCU is watching before calling a stack trace
kprobes: Document how optimized kprobes are removed from module unload
selftests/ftrace: Add test to remove instance with active event triggers
selftests/ftrace: Fix bashisms
ftrace: Remove #ifdef from code and add clear_ftrace_function_probes() stub
ftrace/instances: Clear function triggers when removing instances
ftrace: Simplify glob handling in unregister_ftrace_function_probe_func()
tracing/kprobes: Enforce kprobes teardown after testing
tracing: Move postpone selftests to core from early_initcall
Linus Torvalds [Sat, 20 May 2017 23:12:30 +0000 (16:12 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A small collection of fixes that should go into this cycle.
- a pull request from Christoph for NVMe, which ended up being
manually applied to avoid pulling in newer bits in master. Mostly
fibre channel fixes from James, but also a few fixes from Jon and
Vijay
- a pull request from Konrad, with just a single fix for xen-blkback
from Gustavo.
- a fuseblk bdi fix from Jan, fixing a regression in this series with
the dynamic backing devices.
- a blktrace fix from Shaohua, replacing sscanf() with kstrtoull().
- a request leak fix for drbd from Lars, fixing a regression in the
last series with the kref changes. This will go to stable as well"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvmet: release the sq ref on rdma read errors
nvmet-fc: remove target cpu scheduling flag
nvme-fc: stop queues on error detection
nvme-fc: require target or discovery role for fc-nvme targets
nvme-fc: correct port role bits
nvme: unmap CMB and remove sysfs file in reset path
blktrace: fix integer parse
fuseblk: Fix warning in super_setup_bdi_name()
block: xen-blkback: add null check to avoid null pointer dereference
drbd: fix request leak introduced by locking/atomic, kref: Kill kref_sub()
Vijay Immanuel [Mon, 8 May 2017 23:38:35 +0000 (16:38 -0700)]
nvmet: release the sq ref on rdma read errors
On rdma read errors, release the sq ref that was taken
when the req was initialized. This avoids a hang in
nvmet_sq_destroy() when the queue is being freed.
Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
James Smart [Tue, 25 Apr 2017 23:23:09 +0000 (16:23 -0700)]
nvmet-fc: remove target cpu scheduling flag
Remove NVMET_FCTGTFEAT_NEEDS_CMD_CPUSCHED. It's unnecessary.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
James Smart [Tue, 25 Apr 2017 22:32:01 +0000 (15:32 -0700)]
nvme-fc: stop queues on error detection
Per the recommendation by Sagi on:
http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html
Rather than waiting for reset work thread to stop queues and abort the ios,
immediately stop the queues on error detection. Reset thread will restop
the queues (as it's called on other paths), but it does not appear to have
a side effect.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
James Smart [Fri, 5 May 2017 23:13:15 +0000 (16:13 -0700)]
nvme-fc: require target or discovery role for fc-nvme targets
In order to create an association, the remoteport must be
serving either a target role or a discovery role.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
James Smart [Fri, 5 May 2017 23:13:02 +0000 (16:13 -0700)]
nvme-fc: correct port role bits
FC Port roles is a bit mask, not individual values.
Correct nvme definitions to unique bits.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Jon Derrick [Fri, 5 May 2017 20:52:06 +0000 (14:52 -0600)]
nvme: unmap CMB and remove sysfs file in reset path
CMB doesn't get unmapped until removal while getting remapped on every
reset. Add the unmapping and sysfs file removal to the reset path in
nvme_pci_disable to match the mapping path in nvme_pci_enable.
Fixes:
202021c1a ("nvme : Add sysfs entry for NVMe CMBs when appropriate")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Reviewed-By: Stephen Bates <sbates@raithlin.com>
Cc: <stable@vger.kernel.org> # 4.9+
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Linus Torvalds [Sat, 20 May 2017 16:02:27 +0000 (09:02 -0700)]
Merge tag 'staging-4.12-rc2' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are a number of staging driver fixes for 4.12-rc2
Most of them are typec driver fixes found by reviewers and users of
the code. There are also some removals of files no longer needed in
the tree due to the ion driver rewrite in 4.12-rc1, as well as some
wifi driver fixes. And to round it out, a MAINTAINERS file update.
All have been in linux-next with no reported issues"
* tag 'staging-4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (22 commits)
MAINTAINERS: greybus-dev list is members-only
staging: fsl-dpaa2/eth: add ETHERNET dependency
staging: typec: fusb302: refactor resume retry mechanism
staging: typec: fusb302: reset i2c_busy state in error
staging: rtl8723bs: remove re-positioned call to kfree in os_dep/ioctl_cfg80211.c
staging: rtl8192e: GetTs Fix invalid TID 7 warning.
staging: rtl8192e: rtl92e_get_eeprom_size Fix read size of EPROM_CMD.
staging: rtl8192e: fix 2 byte alignment of register BSSIDR.
staging: rtl8192e: rtl92e_fill_tx_desc fix write to mapped out memory.
staging: vc04_services: Fix bulk cache maintenance
staging: ccree: remove extraneous spin_unlock_bh() in error handler
staging: typec: Fix sparse warnings about incorrect types
staging: typec: fusb302: do not free gpio from managed resource
staging: typec: tcpm: Fix Port Power Role field in PS_RDY messages
staging: typec: tcpm: Respond to Discover Identity commands
staging: typec: tcpm: Set correct flags in PD request messages
staging: typec: tcpm: Drop duplicate PD messages
staging: typec: fusb302: Fix chip->vbus_present init value
staging: typec: fusb302: Fix module autoload
staging: typec: tcpci: declare private structure as static
...
Linus Torvalds [Sat, 20 May 2017 15:52:34 +0000 (08:52 -0700)]
Merge tag 'usb-4.12-rc2' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB fixes for 4.12-rc2
Most of them come from Johan, in his valiant quest to fix up all
drivers that could be affected by "malicious" USB devices. There's
also some fixes for more "obscure" drivers to handle some of the
vmalloc stack fallout (which for USB drivers, was always the case, but
very few people actually ran those systems...)
Other than that, the normal set of xhci and gadget and musb driver
fixes as well.
All have been in linux-next with no reported issues"
* tag 'usb-4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (42 commits)
usb: musb: tusb6010_omap: Do not reset the other direction's packet size
usb: musb: Fix trying to suspend while active for OTG configurations
usb: host: xhci-plat: propagate return value of platform_get_irq()
xhci: Fix command ring stop regression in 4.11
xhci: remove GFP_DMA flag from allocation
USB: xhci: fix lock-inversion problem
usb: host: xhci-ring: don't need to clear interrupt pending for MSI enabled hcd
usb: host: xhci-mem: allocate zeroed Scratchpad Buffer
xhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for Denverton
usb: xhci: trace URB before giving it back instead of after
USB: serial: qcserial: add more Lenovo EM74xx device IDs
USB: host: xhci: use max-port define
USB: hub: fix SS max number of ports
USB: hub: fix non-SS hub-descriptor handling
USB: hub: fix SS hub-descriptor handling
USB: usbip: fix nonconforming hub descriptor
USB: gadget: dummy_hcd: fix hub-descriptor removable fields
doc-rst: fixed kernel-doc directives in usb/typec.rst
USB: core: of: document reference taken by companion helper
USB: ehci-platform: fix companion-device leak
...
Linus Torvalds [Sat, 20 May 2017 15:44:22 +0000 (08:44 -0700)]
Merge tag 'char-misc-4.12-rc2' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are five small bugfixes for reported issues with 4.12-rc1 and
earlier kernels. Nothing huge here, just a lp, mem, vpd, and uio
driver fix, along with a Kconfig fixup for one of the misc drivers.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
firmware: Google VPD: Fix memory allocation error handling
drivers: char: mem: Check for address space wraparound with mmap()
uio: fix incorrect memory leak cleanup
misc: pci_endpoint_test: select CRC32
char: lp: fix possible integer overflow in lp_setup()
Linus Torvalds [Sat, 20 May 2017 15:35:27 +0000 (08:35 -0700)]
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
- orion_wdt compile-test dependencies
- sama5d4_wdt: WDDIS handling and a race confition
- pcwd_usb: fix NULL-deref at probe
- cadence_wdt: fix timeout setting
- wdt_pci: fix build error if SOFTWARE_REBOOT is defined
- iTCO_wdt: all versions count down twice
- zx2967: remove redundant dev_err call in zx2967_wdt_probe()
- bcm281xx: Fix use of uninitialized spinlock
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: bcm281xx: Fix use of uninitialized spinlock.
watchdog: zx2967: remove redundant dev_err call in zx2967_wdt_probe()
iTCO_wdt: all versions count down twice
watchdog: wdt_pci: fix build error if define SOFTWARE_REBOOT
watchdog: cadence_wdt: fix timeout setting
watchdog: pcwd_usb: fix NULL-deref at probe
watchdog: sama5d4: fix race condition
watchdog: sama5d4: fix WDDIS handling
watchdog: orion: fix compile-test dependencies
Linus Torvalds [Sat, 20 May 2017 15:29:30 +0000 (08:29 -0700)]
Merge tag 'drm-fixes-for-v4.12-rc2' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Mostly nouveau and i915, fairly quiet as usual for rc2"
* tag 'drm-fixes-for-v4.12-rc2' of git://people.freedesktop.org/~airlied/linux:
drm/atmel-hlcdc: Fix output initialization
gpu: host1x: select IOMMU_IOVA
drm/nouveau/fifo/gk104-: Silence a locking warning
drm/nouveau/secboot: plug memory leak in ls_ucode_img_load_gr() error path
drm/nouveau: Fix drm poll_helper handling
drm/i915: don't do allocate_va_range again on PIN_UPDATE
drm/i915: Fix rawclk readout for g4x
drm/i915: Fix runtime PM for LPE audio
drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages
drm/i915/gvt: avoid unnecessary vgpu switch
drm/i915/gvt: not to restore in-context mmio
drm/etnaviv: don't put fence in case of submit failure
drm/i915/gvt: fix typo: "supporte" -> "support"
drm: hdlcd: Fix the calculation of the scanout start address
Linus Torvalds [Sat, 20 May 2017 00:46:51 +0000 (17:46 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is the first sweep of mostly minor fixes. There's one security
one: the read past the end of a buffer in qedf, and a panic fix for
lpfc SLI-3 adapters, but the rest are a set of include and build
dependency tidy ups and assorted other small fixes and updates"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pmcraid: remove redundant check to see if request_size is less than zero
scsi: lpfc: ensure els_wq is being checked before destroying it
scsi: cxlflash: Select IRQ_POLL
scsi: qedf: Avoid reading past end of buffer
scsi: qedf: Cleanup the type of io_log->op
scsi: lpfc: double lock typo in lpfc_ns_rsp()
scsi: qedf: properly update arguments position in function call
scsi: scsi_lib: Add #include <scsi/scsi_transport.h>
scsi: MAINTAINERS: update OSD entries
scsi: Skip deleted devices in __scsi_device_lookup
scsi: lpfc: Fix panic on BFS configuration
scsi: libfc: do not flood console with messages 'libfc: queue full ...'
Linus Torvalds [Sat, 20 May 2017 00:35:34 +0000 (17:35 -0700)]
Merge branch 'libnvdimm-for-next' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A couple of compile fixes.
With the removal of the ->direct_access() method from
block_device_operations in favor of a new dax_device + dax_operations
we broke two configurations.
The CONFIG_BLOCK=n case is fixed by compiling out the block+dax
helpers in the dax core. Configurations with FS_DAX=n EXT4=y / XFS=y
and DAX=m fail due to the helpers the builtin filesystem needs being
in a module, so we stub out the helpers in the FS_DAX=n case."
* 'libnvdimm-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax, xfs, ext4: compile out iomap-dax paths in the FS_DAX=n case
dax: fix false CONFIG_BLOCK dependency
Linus Torvalds [Sat, 20 May 2017 00:33:08 +0000 (17:33 -0700)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"A regression fix for I2C that would be great to have in rc2"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: don't infer timings described by ACPI from clock rate
Linus Torvalds [Sat, 20 May 2017 00:27:28 +0000 (17:27 -0700)]
Merge tag 'iommu-fixes-v4.12-rc1' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- another compile-fix as a fallout of the recent header-file cleanup
- add a missing IO/TLB flush to the Intel VT-d kdump code path
- a fix for ARM64 dma code to only access initialized iova_domain
members
* tag 'iommu-fixes-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/mediatek: Include linux/dma-mapping.h
iommu/vt-d: Flush the IOTLB to get rid of the initial kdump mappings
iommu/dma: Don't touch invalid iova_domain members
Linus Torvalds [Fri, 19 May 2017 22:13:13 +0000 (15:13 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- a fix for a build failure introduced in -rc1 when tracepoints are
enabled on 32-bit ARM.
- disable use of stack pointer protection in the hyp code which can
cause panics.
- a handful of VGIC fixes.
- a fix to the init of the redistributors on GICv3 systems that
prevented boot with kvmtool on GICv3 systems introduced in -rc1.
- a number of race conditions fixed in our MMU handling code.
- a fix for the guest being able to program the debug extensions for
the host on the 32-bit side.
PPC:
- fixes for build failures with PR KVM configurations.
- a fix for a host crash that can occur on POWER9 with radix guests.
x86:
- fixes for nested PML and nested EPT.
- a fix for crashes caused by reserved bits in SSE MXCSR that could
have been set by userspace.
- an optimization of halt polling that fixes high CPU overhead.
- fixes for four reports from Dan Carpenter's static checker.
- a protection around code that shouldn't have been preemptible.
- a fix for port IO emulation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (27 commits)
KVM: x86: prevent uninitialized variable warning in check_svme()
KVM: x86/vPMU: fix undefined shift in intel_pmu_refresh()
KVM: x86: zero base3 of unusable segments
KVM: X86: Fix read out-of-bounds vulnerability in kvm pio emulation
KVM: x86: Fix potential preemption when get the current kvmclock timestamp
KVM: Silence underflow warning in avic_get_physical_id_entry()
KVM: arm/arm64: Hold slots_lock when unregistering kvm io bus devices
KVM: arm/arm64: Fix bug when registering redist iodevs
KVM: x86: lower default for halt_poll_ns
kvm: arm/arm64: Fix use after free of stage2 page table
kvm: arm/arm64: Force reading uncached stage2 PGD
KVM: nVMX: fix EPT permissions as reported in exit qualification
KVM: VMX: Don't enable EPT A/D feature if EPT feature is disabled
KVM: x86: Fix load damaged SSEx MXCSR register
kvm: nVMX: off by one in vmx_write_pml_buffer()
KVM: arm: rename pm_fake handler to trap_raz_wi
KVM: arm: plug potential guest hardware debug leakage
kvm: arm/arm64: Fix race in resetting stage2 PGD
KVM: arm/arm64: vgic-v3: Use PREbits to infer the number of ICH_APxRn_EL2 registers
KVM: arm/arm64: vgic-v3: Do not use Active+Pending state for a HW interrupt
...
Linus Torvalds [Fri, 19 May 2017 22:06:48 +0000 (15:06 -0700)]
Merge tag 'for-linus-4.12b-rc2-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Some fixes for the new Xen 9pfs frontend and some minor cleanups"
* tag 'for-linus-4.12b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: make xen_flush_tlb_all() static
xen: cleanup pvh leftovers from pv-only sources
xen/9pfs: p9_trans_xen_init and p9_trans_xen_exit can be static
xen/9pfs: fix return value check in xen_9pfs_front_probe()
Linus Torvalds [Fri, 19 May 2017 22:03:24 +0000 (15:03 -0700)]
Merge tag 'devicetree-fixes-for-4.12' of git://git./linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
- fix missing allocation failure handling in fdt code
- fix dtc compile error on 32-bit hosts
- revert bad sparse changes causing GCC7 warnings
* tag 'devicetree-fixes-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: fdt: add missing allocation-failure check
dtc: check.c fix compile error
Partially Revert "of: fix sparse warnings in fdt, irq, reserved mem, and resolver code"
Linus Torvalds [Fri, 19 May 2017 20:36:56 +0000 (13:36 -0700)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"We had a small batch of fixes before -rc1, but here is a larger one.
It contains a backmerge of 4.12-rc1 since some of the downstream
branches we merge had that as base; at the same time we already had
merged contents before -rc1 and rebase wasn't the right solution.
A mix of random smaller fixes and a few things worth pointing out:
- We've started telling people to avoid cross-tree shared branches if
all they're doing is picking up one or two DT-used constants from a
shared include file, and instead to use the numeric values on first
submission. Follow-up moving over to symbolic names are sent in
right after -rc1, i.e. here. It's only a few minor patches of this
type.
- Linus Walleij and others are resurrecting the 'Gemini' platform,
and wanted a cut-down platform-specific defconfig for it. So I
picked that up for them.
- Rob Herring ran 'savedefconfig' on arm64, it's a bit churny but it
helps people to prepare patches since it's a pain when defconfig
and current savedefconfig contents differs too much.
- Devicetree additions for some pinctrl drivers for Armada that were
merged this window. I'd have preferred to see those earlier but
it's not a huge deail.
The biggest change worth pointing out though since it's touching other
parts of the tree: We added prefixes to be used when cross-including
DT contents between arm64 and arm, allowing someone to #include
<arm/foo.dtsi> from arm64, and likewise. As part of that, we needed
arm/foo.dtsi to work on arm as well. The way I suggested this to Heiko
resulted in a recursive symlink.
Instead, I've now moved it out of arch/*/boot/dts/include, into a
shared location under scripts/dtc. While I was at it, I consolidated
so all architectures now behave the same way in this manner.
Rob Herring (DT maintainer) has acked it. I cc:d most other arch
maintainers but nobody seems to care much; it doesn't really affect
them since functionality is unchanged for them by default"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
arm64: dts: rockchip: fix include reference
firmware: ti_sci: fix strncat length check
ARM: remove duplicate 'const' annotations'
arm64: defconfig: enable options needed for QCom DB410c board
arm64: defconfig: sync with savedefconfig
ARM: configs: add a gemini defconfig
devicetree: Move include prefixes from arch to separate directory
ARM: dts: dra7: Reduce cpu thermal shutdown temperature
memory: omap-gpmc: Fix debug output for access width
ARM: dts: LogicPD Torpedo: Fix camera pin mux
ARM: dts: omap4: enable CEC pin for Pandaboard A4 and ES
ARM: dts: gta04: fix polarity of clocks for mcbsp4
ARM: dts: dra7: Add power hold and power controller properties to palmas
soc: imx: add PM dependency for IMX7_PM_DOMAINS
ARM: dts: imx6sx-sdb: Remove OPP override
ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin
soc: bcm: brcmstb: Correctly match 7435 SoC
tee: add ARM_SMCCC dependency
ARM: omap2+: make omap4_get_cpu1_ns_pa_addr declaration usable
ARM64: dts: mediatek: configure some fixed mmc parameters
...
Linus Torvalds [Fri, 19 May 2017 20:34:34 +0000 (13:34 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes/cleanups from Catalin Marinas:
- Avoid taking a mutex in the secondary CPU bring-up path when
interrupts are disabled
- Ignore perf exclude_hv when the kernel is running in Hyp mode
- Remove redundant instruction in cmpxchg
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/cpufeature: don't use mutex in bringup path
arm64: perf: Ignore exclude_hv when kernel is running in HYP
arm64: Remove redundant mov from LL/SC cmpxchg
Dave Airlie [Fri, 19 May 2017 20:00:49 +0000 (06:00 +1000)]
Merge branch 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld into drm-fixes
single hdlcd fix
* 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld:
drm: hdlcd: Fix the calculation of the scanout start address
Linus Torvalds [Fri, 19 May 2017 18:31:38 +0000 (11:31 -0700)]
Merge tag 'powerpc-4.12-3' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"The headliner is a fix for FP/VMX register corruption when using
transactional memory, and a new selftest to go with it.
Then there's the virt_addr_valid() fix, currently HARDENDED_USERCOPY
is tripping on that causing some machines to crash.
A few other fairly minor fixes for long tail things, and a couple of
fixes for code we just merged.
Thanks to: Breno Leitao, Gautham Shenoy, Michael Neuling, Naveen Rao.
Nicholas Piggin, Paul Mackerras"
* tag 'powerpc-4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fix virt_addr_valid() etc. on 64-bit hash
powerpc/mm: Fix crash in page table dump with huge pages
powerpc/kprobes: Fix handling of instruction emulation on probe re-entry
powerpc/powernv: Set NAPSTATELOST after recovering paca on P9 DD1
selftests/powerpc: Test TM and VMX register state
powerpc/tm: Fix FP and VMX register corruption
powerpc/modules: If mprofile-kernel is enabled add it to vermagic
Radim Krčmář [Thu, 18 May 2017 17:37:32 +0000 (19:37 +0200)]
KVM: x86: prevent uninitialized variable warning in check_svme()
get_msr() of MSR_EFER is currently always going to succeed, but static
checker doesn't see that far.
Don't complicate stuff and just use 0 for the fallback -- it means that
the feature is not present.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Radim Krčmář [Thu, 18 May 2017 17:37:31 +0000 (19:37 +0200)]
KVM: x86/vPMU: fix undefined shift in intel_pmu_refresh()
Static analysis noticed that pmu->nr_arch_gp_counters can be 32
(INTEL_PMC_MAX_GENERIC) and therefore cannot be used to shift 'int'.
I didn't add BUILD_BUG_ON for it as we have a better checker.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
25462f7f5295 ("KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Radim Krčmář [Thu, 18 May 2017 17:37:30 +0000 (19:37 +0200)]
KVM: x86: zero base3 of unusable segments
Static checker noticed that base3 could be used uninitialized if the
segment was not present (useable). Random stack values probably would
not pass VMCS entry checks.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
1aa366163b8b ("KVM: x86 emulator: consolidate segment accessors")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Wanpeng Li [Fri, 19 May 2017 09:46:56 +0000 (02:46 -0700)]
KVM: X86: Fix read out-of-bounds vulnerability in kvm pio emulation
Huawei folks reported a read out-of-bounds vulnerability in kvm pio emulation.
- "inb" instruction to access PIT Mod/Command register (ioport 0x43, write only,
a read should be ignored) in guest can get a random number.
- "rep insb" instruction to access PIT register port 0x43 can control memcpy()
in emulator_pio_in_emulated() to copy max 0x400 bytes but only read 1 bytes,
which will disclose the unimportant kernel memory in host but no crash.
The similar test program below can reproduce the read out-of-bounds vulnerability:
void hexdump(void *mem, unsigned int len)
{
unsigned int i, j;
for(i = 0; i < len + ((len % HEXDUMP_COLS) ? (HEXDUMP_COLS - len % HEXDUMP_COLS) : 0); i++)
{
/* print offset */
if(i % HEXDUMP_COLS == 0)
{
printf("0x%06x: ", i);
}
/* print hex data */
if(i < len)
{
printf("%02x ", 0xFF & ((char*)mem)[i]);
}
else /* end of block, just aligning for ASCII dump */
{
printf(" ");
}
/* print ASCII dump */
if(i % HEXDUMP_COLS == (HEXDUMP_COLS - 1))
{
for(j = i - (HEXDUMP_COLS - 1); j <= i; j++)
{
if(j >= len) /* end of block, not really printing */
{
putchar(' ');
}
else if(isprint(((char*)mem)[j])) /* printable char */
{
putchar(0xFF & ((char*)mem)[j]);
}
else /* other char */
{
putchar('.');
}
}
putchar('\n');
}
}
}
int main(void)
{
int i;
if (iopl(3))
{
err(1, "set iopl unsuccessfully\n");
return -1;
}
static char buf[0x40];
/* test ioport 0x40,0x41,0x42,0x43,0x44,0x45 */
memset(buf, 0xab, sizeof(buf));
asm volatile("push %rdi;");
asm volatile("mov %0, %%rdi;"::"q"(buf));
asm volatile ("mov $0x40, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");
asm volatile ("mov $0x41, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");
asm volatile ("mov $0x42, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");
asm volatile ("mov $0x43, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");
asm volatile ("mov $0x44, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");
asm volatile ("mov $0x45, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");
asm volatile ("pop %rdi;");
hexdump(buf, 0x40);
printf("\n");
/* ins port 0x40 */
memset(buf, 0xab, sizeof(buf));
asm volatile("push %rdi;");
asm volatile("mov %0, %%rdi;"::"q"(buf));
asm volatile ("mov $0x20, %rcx;");
asm volatile ("mov $0x40, %rdx;");
asm volatile ("rep insb;");
asm volatile ("pop %rdi;");
hexdump(buf, 0x40);
printf("\n");
/* ins port 0x43 */
memset(buf, 0xab, sizeof(buf));
asm volatile("push %rdi;");
asm volatile("mov %0, %%rdi;"::"q"(buf));
asm volatile ("mov $0x20, %rcx;");
asm volatile ("mov $0x43, %rdx;");
asm volatile ("rep insb;");
asm volatile ("pop %rdi;");
hexdump(buf, 0x40);
printf("\n");
return 0;
}
The vcpu->arch.pio_data buffer is used by both in/out instrutions emulation
w/o clear after using which results in some random datas are left over in
the buffer. Guest reads port 0x43 will be ignored since it is write only,
however, the function kernel_pio() can't distigush this ignore from successfully
reads data from device's ioport. There is no new data fill the buffer from
port 0x43, however, emulator_pio_in_emulated() will copy the stale data in
the buffer to the guest unconditionally. This patch fixes it by clearing the
buffer before in instruction emulation to avoid to grant guest the stale data
in the buffer.
In addition, string I/O is not supported for in kernel device. So there is no
iteration to read ioport %RCX times for string I/O. The function kernel_pio()
just reads one round, and then copy the io size * %RCX to the guest unconditionally,
actually it copies the one round ioport data w/ other random datas which are left
over in the vcpu->arch.pio_data buffer to the guest. This patch fixes it by
introducing the string I/O support for in kernel device in order to grant the right
ioport datas to the guest.
Before the patch:
0x000000: fe 38 93 93 ff ff ab ab .8......
0x000008: ab ab ab ab ab ab ab ab ........
0x000010: ab ab ab ab ab ab ab ab ........
0x000018: ab ab ab ab ab ab ab ab ........
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........
0x000000: f6 00 00 00 00 00 00 00 ........
0x000008: 00 00 00 00 00 00 00 00 ........
0x000010: 00 00 00 00 4d 51 30 30 ....MQ00
0x000018: 30 30 20 33 20 20 20 20 00 3
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........
0x000000: f6 00 00 00 00 00 00 00 ........
0x000008: 00 00 00 00 00 00 00 00 ........
0x000010: 00 00 00 00 4d 51 30 30 ....MQ00
0x000018: 30 30 20 33 20 20 20 20 00 3
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........
After the patch:
0x000000: 1e 02 f8 00 ff ff ab ab ........
0x000008: ab ab ab ab ab ab ab ab ........
0x000010: ab ab ab ab ab ab ab ab ........
0x000018: ab ab ab ab ab ab ab ab ........
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........
0x000000: d2 e2 d2 df d2 db d2 d7 ........
0x000008: d2 d3 d2 cf d2 cb d2 c7 ........
0x000010: d2 c4 d2 c0 d2 bc d2 b8 ........
0x000018: d2 b4 d2 b0 d2 ac d2 a8 ........
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........
0x000000: 00 00 00 00 00 00 00 00 ........
0x000008: 00 00 00 00 00 00 00 00 ........
0x000010: 00 00 00 00 00 00 00 00 ........
0x000018: 00 00 00 00 00 00 00 00 ........
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........
Reported-by: Moguofang <moguofang@huawei.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Moguofang <moguofang@huawei.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Wanpeng Li [Fri, 12 May 2017 01:12:05 +0000 (18:12 -0700)]
KVM: x86: Fix potential preemption when get the current kvmclock timestamp
BUG: using __this_cpu_read() in preemptible [
00000000] code: qemu-system-x86/2809
caller is __this_cpu_preempt_check+0x13/0x20
CPU: 2 PID: 2809 Comm: qemu-system-x86 Not tainted 4.11.0+ #13
Call Trace:
dump_stack+0x99/0xce
check_preemption_disabled+0xf5/0x100
__this_cpu_preempt_check+0x13/0x20
get_kvmclock_ns+0x6f/0x110 [kvm]
get_time_ref_counter+0x5d/0x80 [kvm]
kvm_hv_process_stimers+0x2a1/0x8a0 [kvm]
? kvm_hv_process_stimers+0x2a1/0x8a0 [kvm]
? kvm_arch_vcpu_ioctl_run+0xac9/0x1ce0 [kvm]
kvm_arch_vcpu_ioctl_run+0x5bf/0x1ce0 [kvm]
kvm_vcpu_ioctl+0x384/0x7b0 [kvm]
? kvm_vcpu_ioctl+0x384/0x7b0 [kvm]
? __fget+0xf3/0x210
do_vfs_ioctl+0xa4/0x700
? __fget+0x114/0x210
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x23/0xc2
RIP: 0033:0x7f9d164ed357
? __this_cpu_preempt_check+0x13/0x20
This can be reproduced by run kvm-unit-tests/hyperv_stimer.flat w/
CONFIG_PREEMPT and CONFIG_DEBUG_PREEMPT enabled.
Safe access to per-CPU data requires a couple of constraints, though: the
thread working with the data cannot be preempted and it cannot be migrated
while it manipulates per-CPU variables. If the thread is preempted, the
thread that replaces it could try to work with the same variables; migration
to another CPU could also cause confusion. However there is no preemption
disable when reads host per-CPU tsc rate to calculate the current kvmclock
timestamp.
This patch fixes it by utilizing get_cpu/put_cpu pair to guarantee both
__this_cpu_read() and rdtsc() are not preempted.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>