Craig A. Berry [Sun, 15 May 2011 20:34:34 +0000 (15:34 -0500)]
Correct perldoc search path for VMS.
Father Chrysostomos [Thu, 19 May 2011 03:13:15 +0000 (20:13 -0700)]
Add Kevin Woolley to AUTHORS
Kevin J. Woolley [Thu, 19 May 2011 01:22:36 +0000 (18:22 -0700)]
[perl #88812] INSTALL file changes (post-5.14)
- minor spelling, punctuation corrections
Martin Becker [Thu, 19 May 2011 01:15:40 +0000 (18:15 -0700)]
[perl #88496] missing dependencies in perl core makefiles
I have spotted a couple of missing dependencies in the makefiles
utils/Makefile.SH and x2p/Makefile.SH that prevent json_pp, s2p,
psed, and find2perl from being rebuilt after configuration changes.
This could cause trouble if the install prefix has been changed,
so that the shebang line of these scripts from a previous build
no longer matches the target location of the perl binary.
A workaround would be to always "make clean" after changes to
the configuration, which sounds reasonable anyway. That said,
most of the other tools do have config.sh properly listed as a
dependency and I don't see why those four should not.
I have attached a small patch against perl-5.13.11 to fix this.
The bug is also present in the latest stable release as of this
writing, perl-5.12.3, except that json_pp is not included there.
Father Chrysostomos [Thu, 19 May 2011 03:11:53 +0000 (20:11 -0700)]
Increase perl5db.pl’s $VERSION
Louis Strous [Thu, 19 May 2011 01:07:52 +0000 (18:07 -0700)]
[perl #87740] perl debugger restart fails on Windows
Start debugger for some perl script, enter "R" command to restart.
Get no restart, but error message about POSIX macro _SC_OPEN_MAX and
termination of debugged program. Entering "R" again yields a similar
error message and terminates the debugger.
Lines 3332-3335 of perl5db.pl read:
>>
my $max_fd = 1024; # default if POSIX can't be loaded
if (eval { require POSIX }) {
$max_fd = POSIX::sysconf(POSIX::_SC_OPEN_MAX());
}
<<
POSIX Is available but POSIX::_SC_OPEN_MAX is not defined on Windows.
This yields an exception, which means that the "restart" code follow-
ing these lines is not executed, so no proper restart is done. If
POSIX weren't available at all, then a default value of 1024 would be
used for $max_fd.
A workaround is to not cause an exception if _SC_OPEN_MAX is not
defined, but instead use the default value that has already been
defined in case POSIX cannot be loaded at all. Do this by wrapping
line 3334 of perl5db.pl in an eval { }. Then on Windows the default
value of 1024 gets used for $max_fd, just like if POSIX were not
available at all. This seems to work OK for me on Windows 7. I can
now restart the debugger, and breakpoints are retained.
Father Chrysostomos [Thu, 19 May 2011 01:04:47 +0000 (18:04 -0700)]
Add Louis Strous to AUTHORS
Father Chrysostomos [Thu, 19 May 2011 01:02:59 +0000 (18:02 -0700)]
Confusing comment typo in Deparse
Michael Witten [Mon, 16 May 2011 01:18:00 +0000 (01:18 +0000)]
Clean: Remove confusing comment from a test
As per:
Re: [PATCH 2/2] Clean: Actually use HvUSEDKEYS() instead of HvKEYS()
Sun, 15 May 2011 20:29:05 +0000
Message-Id: <
2a28ed668b6641e6b5f6e0fb4e5374b4-mfwitten@gmail.com>
the text in question was introduced along with the test in this commit:
$ c=
58da6fbcb8d595318b667d7d7cc8739f5feb15f3
$ git log -1 $c
commit
58da6fbcb8d595318b667d7d7cc8739f5feb15f3
Author: Max Maischein <corion@corion.net>
Date: Mon Jun 1 14:18:42 2009 +0200
Add benchmark test for keys() on empty hashes (RT26188)
I believe the text in question is an allusion to the code introduced in
the parent commit:
$ git log -1 $c^
commit
900ac0519e4b408fd93443b14b734cc330c59698
Author: Max Maischein <corion@corion.net>
Date: Sun May 31 23:50:12 2009 +0200
Fix RT26188, speed up keys() on empty hash
namely the code starting at line 2132 of
900ac0519e4b408fd93443b14b734cc330c59698:hv.c:
/* At start of hash, entry is NULL. */
...
if (HvKEYS(hv) || (flags & HV_ITERNEXT_WANTPLACEHOLDERS)) {
...
}
...
return entry;
It is best just to remove the text in question, as it is of no
real use.
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Michael Witten [Mon, 14 Mar 2011 06:57:43 +0000 (06:57 +0000)]
Clean: Actually use HvUSEDKEYS() instead of HvKEYS()
This:
commit
8aacddc1ea3837f8f1a911d90c644451fc7cfc86
Author: Nick Ing-Simmons <nik@tiuk.ti.com>
Date: Tue Dec 18 15:55:22 2001 +0000
Tidied version of Jeffrey Friedl's <jfriedl@yahoo.com> restricted hashes
- added delete of READONLY value inhibit & test for same
- re-tabbed
p4raw-id: //depot/perlio@13760
essentially deprecated HvKEYS() in favor of HvUSEDKEYS(); this is
explained in line 144 (now 313) of file `hv.h':
/*
* HvKEYS gets the number of keys that actually exist(), and is provided
* for backwards compatibility with old XS code. The core uses HvUSEDKEYS
* (keys, excluding placeholdes) and HvTOTALKEYS (including placeholders)
*/
This commit simply puts that into practice, and is equivalent to running
the following (at least with
a35ef416833511da752c4b5b836b7a8915712aab
checked out):
git grep -l HvKEYS | sed /hv.h/d | xargs sed -i s/HvKEYS/HvUSEDKEYS/
Notice that HvKEYS is currently just an alias for HvUSEDKEYS:
$ git show
a35ef416833511da752c4b5b836b7a8915712aab:hv.h | sed -n 318p
#define HvKEYS(hv) HvUSEDKEYS(hv)
According to `make tests':
All tests successful.
Leo Lapworth [Sun, 3 Apr 2011 08:20:04 +0000 (09:20 +0100)]
README.macosx - clarify requirement of apple developer tools
Leo Lapworth [Sun, 3 Apr 2011 08:06:56 +0000 (09:06 +0100)]
README.macosx - remove Carbon reference
Leo Lapworth [Sun, 3 Apr 2011 08:04:06 +0000 (09:04 +0100)]
README.macosx - cleanup/update copy, remove 'MacPerl'
Leo Lapworth [Sun, 3 Apr 2011 07:48:14 +0000 (08:48 +0100)]
Cleanup README.macosx
- Direct people for README.macosx straight away
- Make synopsis copy shorter and clearer
Leo Lapworth [Sun, 3 Apr 2011 07:49:58 +0000 (08:49 +0100)]
Update AUTHORS file (add myself)
Father Chrysostomos [Wed, 18 May 2011 23:17:38 +0000 (16:17 -0700)]
Add Nuno Cavalho’s other e-mail address
smash [Mon, 16 May 2011 14:08:59 +0000 (15:08 +0100)]
add given when to perfunc
David Mitchell [Wed, 18 May 2011 23:01:22 +0000 (00:01 +0100)]
buildtoc: make dying clearer
print a big "ABORTED" if it dies.
David Mitchell [Wed, 18 May 2011 22:44:14 +0000 (23:44 +0100)]
buildtoc: make a warning clearer
make it clear that the cannot find '=head1 NAME' warning isn't fatal,
and split it over two lines ofr clarity with long filenames
Father Chrysostomos [Fri, 13 May 2011 15:37:48 +0000 (08:37 -0700)]
[perl #78074] Make it explicit that symtab manipulation is not supported
Father Chrysostomos [Sat, 14 May 2011 01:12:30 +0000 (18:12 -0700)]
Restore a croak I deleted by mistake
Todd Rinaldo [Fri, 13 May 2011 05:39:22 +0000 (22:39 -0700)]
RT72688 - Benchmark.t test 24 bug when the testing system is under load.
David Mitchell [Wed, 18 May 2011 22:24:57 +0000 (23:24 +0100)]
release_managers_guide: replace =item with =head3
The main body of the Release Manager's Guide is currently just a long list
of steps, each with a '=item *'. Replace these with
=head3 some description
so that its easier to navigate around.
Also do a few minor structural fixups along the way (eg splitting or
merging individual =item sections).
Also a few typos and bits fixed as I noticed them.
David Mitchell [Wed, 18 May 2011 21:22:25 +0000 (22:22 +0100)]
release_managers_guide: add BLEAD-POINT/-FINAL
the Release Manager's Guide talks about three different release types,
RC, BLEAD and MAINT. This is a bit ambiguous for a major release
(e.g. 5.14.0): is it the first MAINT or the last BLEAD?
So, split BLEAD into two:
BLEAD-FINAL - a final release on a blead branch (e.g. 5.14.0)
BLEAD-POINT - a point release on a blead branch (e.g. 5.15.0, 5.15.1)
Then update the whole document to use these tags consistently.
David Mitchell [Wed, 18 May 2011 20:15:23 +0000 (21:15 +0100)]
release_managers_guide: remove SNAPSHOT
Now that we make regular blead releases, we no longer need to make
snapshot releases. So remove the instructions for SNAPSHOT that
litter release_managers_guide.pod.
Eric Brine [Mon, 21 Feb 2011 10:37:27 +0000 (02:37 -0800)]
given wasn't calling set magic [RT#84526]
Eric Brine [Mon, 21 Feb 2011 10:35:24 +0000 (02:35 -0800)]
TODO tests for RT#84526 - given needs to handle magical TARG
Father Chrysostomos [Fri, 13 May 2011 05:16:57 +0000 (22:16 -0700)]
Revert "Partially revert
4155e4fe"
This reverts commit
7f586e41ad4ecd904c7d8dbe1ddb0f9410484bac.
Father Chrysostomos [Fri, 13 May 2011 05:33:37 +0000 (22:33 -0700)]
Revert "silence do_curse() compiler warning"
This reverts commit
82336099d393c4ac04507e58e4402ba9c413f791.
Michael Witten [Wed, 18 May 2011 21:48:41 +0000 (14:48 -0700)]
Ignore pod/*.{html,man}
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Bo Lindbergh [Fri, 13 May 2011 04:42:03 +0000 (21:42 -0700)]
waitpid doesn't work with WIFSTOPPED
> Quoth Emmanuel Rodriguez:
>> I'm see a strange behavior in the fonction WIFSTOPPED($?) when
>> waitpid($pid, WUNTRACED) is invoked and that the child process
>> receives a stop signal. Under this conditions one would expect that
>> WIFSTOPPED($?) would return a true value, but that's not what is
>> happening. A similar program written in C will have the same macro
>> return true instead of false under the same conditions.
>>
>> I can reproduce this with the default perl provided by Ubuntu 9.10 and
>> OS X 10.6. Which lets me guess that this is not a distro related bug.
>
> This is a documentation error. POSIX.pod incorrectly claims that
> you can pass the value of $? to WIFEXITED and its relatives.
> You must use the raw status value from ${^CHILD_ERROR_NATIVE} instead.
And here's the patch. Note that perlvar.pod gets it right already.
/Bo Lindbergh
Father Chrysostomos [Wed, 18 May 2011 21:38:48 +0000 (14:38 -0700)]
[perl #90898] B::Deparse failure on glob()
Change d1bea3d changed the way that glob() is converted into
a CORE::GLOBAL::glob call, by preserving the OP_GLOB node, so
that it could still do overloading.
But B::Deparse was never updated to account for the change to
the op tree.
Father Chrysostomos [Wed, 18 May 2011 21:35:47 +0000 (14:35 -0700)]
[perl #90160] U* gives ‘U0 mode on an empty string’
This is a regression in 5.10 caused by change 23966/
08ca2aa38a29,
which added a bit of faulty logic. It was treating U* in the middle of
a pack template as equivalent to U0, if the input string was empty.
Zefram [Wed, 18 May 2011 20:54:55 +0000 (21:54 +0100)]
update Math-Complex to CPAN version 1.57
* Add copy constructor and arrange for it to be called
appropriately, problem found by David Madore and Alexandr
Ciornii.
* Correctly format polarwise when a numeric format specifier is
given, problem found by TomC.
* More stable great_circle_direction algorithm, problem found
by Daniel Burr.
Zefram [Wed, 18 May 2011 20:49:45 +0000 (21:49 +0100)]
update Time-HiRes to CPAN version 1.9722
- Fix broken linkage on Windows with gcc 3.4 seen with ActivePerl,
report from Christian Walde [rt.cpan.org #61648], fix derived
from Vincent Pit.
- Jump through hoops to avoid compiler warnings.
Justin Case [Wed, 18 May 2011 20:43:24 +0000 (13:43 -0700)]
[perl #89896] Locale::Maketext test failure
when environment has variable containing unbalanced brackets
Patch is attached to escape brackets in the value of the environment
variable being used in the test.
Nicholas Clark [Tue, 29 Mar 2011 15:37:10 +0000 (16:37 +0100)]
In Perl_regdupe_internal() eliminate npar, which is assigned to but never used.
It has been unused since
28d8d7f41ab202dd restructured the regexp dup code.
Nicholas Clark [Tue, 29 Mar 2011 14:36:40 +0000 (15:36 +0100)]
In S_regpiece(), only declare parse_start if conditional code needs it.
gcc 4.6.0 warns about variables that are set but never read, and unless
RE_TRACK_PATTERN_OFFSETS is defined, parse_start is never read. So avoid
declaring or setting it if it's not actually going to be used later.
Nicholas Clark [Tue, 29 Mar 2011 14:06:50 +0000 (15:06 +0100)]
In Perl_safesyscalloc(), only declare total_size if conditional code needs it.
gcc 4.6.0 warns about variables that are set but never read, and for most
combinations of conditional compilation options, total_size is never read.
So avoid declaring or setting it if it's not actually going to be used later.
Nicholas Clark [Tue, 29 Mar 2011 13:15:59 +0000 (14:15 +0100)]
In pp_warn and pp_die, eliminate pv, which is assigned to but never read.
Nicholas Clark [Tue, 29 Mar 2011 12:38:13 +0000 (13:38 +0100)]
Eliminate C variables unused since
4d0fbddde6c5dcb9 refactored HvFILL()
3 functions had C variables previously used to track whether the number of
hash chains have any entries.
4d0fbddde6c5dcb9 refactored the hash
implementation to calculated this on demand, instead of tracking changes to
it on hash updates. That change missed eliminating those variables, as
gcc prior to 4.6.0 didn't actually warn that they weren't used, because
(technically) they aren't unused - they are assigned to, but never read.
gcc (at least 4.3.2 and 4.6.0) generates identical object code with/without
this change, implying that its optimiser correctly eliminates the code.
Other optimisers may be similar, in which case there's no runtime saving from
this change.
Karl Williamson [Wed, 18 May 2011 18:44:44 +0000 (12:44 -0600)]
mktables: Put off removing the \N{BELL} conflict
Unicode 6.0 re-used the name BELL for a character other than what it
was traditionally for. There is code in mktables to change the
treatment for 5.15, so that it wouldn't be forgotten. But I'm thinking
that we might want to wait til 5.18 to change, and so I just changed it
to 5.17 instead.
Tom Christiansen [Mon, 2 May 2011 13:28:53 +0000 (09:28 -0400)]
[perl #89662] PATCH to perlfunc.pod: select fix
I think it's about time--by say 20 years--that we stop passing around
filehandles as strings, especially if we don't use Symbol::qualify_to_ref()
to fix the package. Plus it isn't strict-safe. All fixed now.
I am somewhat concerned about the final comment regarding read
and sysread, as I don't know whether PerlIO encoding translation
issues affect this picture.
--tom
Tom Christiansen [Mon, 2 May 2011 13:28:11 +0000 (09:28 -0400)]
[perl #89660] PATCH to perlfunc.pod: three forgotten prototypes, unforgotten
Tom Christiansen [Mon, 2 May 2011 13:27:18 +0000 (09:27 -0400)]
Improved perlpodstyle docs from tchrist
Tom Christiansen [Mon, 2 May 2011 13:25:55 +0000 (09:25 -0400)]
An editing pass on perlop.pod from tchrist
Subject: [perl #89490] PATCH: perlop.pod
Tom Christiansen [Mon, 2 May 2011 13:24:49 +0000 (09:24 -0400)]
perllol doc updates from tchrist.
Tom Christiansen [Mon, 2 May 2011 13:23:11 +0000 (09:23 -0400)]
This patch is aagainst the "blead du moment". It fixes various
things, but does not address the "this version" != 5.14 and the
perlio issues. I believe that these at least should be addressed
as soon as possible (I don't know whether that means 5.14;
probably not). It has to either say the particular version that
applies. We can't keep releasing things that say this version:
they are not trustable.
--tom
Jesse Vincent [Mon, 9 May 2011 02:46:24 +0000 (22:46 -0400)]
Update the version of Darwin we know the by_BE locale to be broken on
Jesse Vincent [Tue, 10 May 2011 13:21:31 +0000 (09:21 -0400)]
Add Vladimir Timofeev to AUTHORS
Vladimir Timofeev [Tue, 10 May 2011 13:17:41 +0000 (09:17 -0400)]
Fix for [perl #90106] 5.14.0-RC2 ODBM_File failures on Ubuntu natty [multiarch]
Ubuntu has juggled lib paths so we get to play games to catch up with
them.
Gisle Aas [Wed, 18 May 2011 18:47:59 +0000 (20:47 +0200)]
S_sv_unmagicext_flags wasn't declared static either
Gisle Aas [Mon, 25 Apr 2011 18:24:00 +0000 (20:24 +0200)]
S_mg_findext_flags wasn't declared static
Nicholas Clark [Mon, 2 May 2011 11:37:30 +0000 (12:37 +0100)]
In S_doparseform(), don't force the pattern to a string. This resolves #79532
Previously S_doparseform() was using SvPV_force(), because the pattern had to
be forced to a string, because the compiled format was stored in the string's
buffer. Now that the compiled format is stored in the magic struct, this isn't
necessary.
Additionally, removing the call to SvPV_force() removes the need to hack with
the SvREADONLY() flag in pp_formline.
Nicholas Clark [Tue, 26 Apr 2011 11:12:34 +0000 (12:12 +0100)]
Store the compiled format in mg_ptr instead of after SvCUR() - fixes RT #89218
Formats are compiled down to a sequence of U32 opcodes in doparseform().
Previously the block of opcodes was stored in the buffer of SvPVX() after
the raw string by extending the buffer, and calculating the first U32 aligned
address after SvCUR(). A flag bit on the scalar was set to signal this hackery,
tested with SvCOMPILED()
The flag bit used happened to be the same as one of the two used by to signal
Boyer-Moore compiled scalars. The assumption was that no scalar can be used for
both. Unfortunately, this isn't quite true.
Given that the scalar is alway upgraded to PVMG to add PERL_MAGIC_fm magic,
to clear the cached compiled version, there's no extra memory cost in using
mg_ptr in the MAGIC struct to point directly to the block of U32 opcodes. The
test for "is there a compiled version" can switch to mg_find(..., PERL_MAGIC_fm)
returning a pointer, and the use of a flag bit abolished.
Retain SvCOMPILED() and SvCOMPILED_{on,off}() as compatibility for XS code on
CPAN - the first is always 0, the other two now no-ops.
Nicholas Clark [Tue, 26 Apr 2011 10:02:45 +0000 (11:02 +0100)]
S_doparseform() should return void, not OP*, as it should use Perl_die not DIE
a1b950687051c32e added an error condition in S_doparseform() but used DIE(...)
to report it. DIE is defined as C<return Perl_die>, which acts as a hint to the
compiler about the control flow [as Perl_die() never returns], but also forces
the return type to be OP *. Whilst this is appropriate for pp functions, it's
not for S_doparseform() -
a1b950687051c32e had to change the return type to OP*
and return NULL, just to appease DIE(). Hence use Perl_die() instead, remove
return statements, and remove the didn't-return-NULL (dead) code from
pp_formline.
Karl Williamson [Tue, 17 May 2011 15:12:06 +0000 (09:12 -0600)]
perlreapi: nits
Karl Williamson [Sun, 8 May 2011 02:01:23 +0000 (20:01 -0600)]
op_reg_common.h: Fix comment
Karl Williamson [Wed, 30 Mar 2011 23:11:34 +0000 (17:11 -0600)]
perluniintro: revise text on blocks vs scripts
Karl Williamson [Thu, 28 Apr 2011 15:31:16 +0000 (09:31 -0600)]
perlop: Add explanation of \c
Karl Williamson [Mon, 25 Apr 2011 00:06:14 +0000 (18:06 -0600)]
perluniprops: specify exact chars in PerlSpace
Karl Williamson [Sun, 24 Apr 2011 15:59:50 +0000 (09:59 -0600)]
perlrecharclass: Nits
Karl Williamson [Sun, 24 Apr 2011 15:57:59 +0000 (09:57 -0600)]
perlrecharclass: Move table
The table makes more sense moved; some accompanying wording cleanup.
Karl Williamson [Sun, 24 Apr 2011 15:55:35 +0000 (09:55 -0600)]
perlrecharclass: Move text about \N
This should come right after the text about '.', as they are related.
Karl Williamson [Sun, 24 Apr 2011 15:54:39 +0000 (09:54 -0600)]
perlrecharclass: Extra leading zero in code points
Karl Williamson [Sun, 24 Apr 2011 15:50:53 +0000 (09:50 -0600)]
regcomp.sym: Add comment
Karl Williamson [Sun, 24 Apr 2011 15:46:55 +0000 (09:46 -0600)]
perlop: Clarify that only ASCII brackets nest
Karl Williamson [Sun, 24 Apr 2011 15:46:18 +0000 (09:46 -0600)]
perluniprops: AHex and PosixXDigit are identical
Karl Williamson [Sun, 24 Apr 2011 15:35:43 +0000 (09:35 -0600)]
charnames: pod nit
Karl Williamson [Sun, 24 Apr 2011 15:33:59 +0000 (09:33 -0600)]
perlfunc: Refer to if.pm from "use"
Karl Williamson [Tue, 3 May 2011 22:40:29 +0000 (16:40 -0600)]
regcomp.c: change comment wording, from TomC
Karl Williamson [Thu, 28 Apr 2011 19:17:53 +0000 (13:17 -0600)]
perlxs: Fix pod errors
Karl Williamson [Thu, 28 Apr 2011 19:17:26 +0000 (13:17 -0600)]
perlunicode: Fix pod error
Karl Williamson [Thu, 28 Apr 2011 19:17:01 +0000 (13:17 -0600)]
perlport: Fix pod errors
Karl Williamson [Thu, 28 Apr 2011 19:16:23 +0000 (13:16 -0600)]
pod/perlfaq2: Fix pod errors
Karl Williamson [Thu, 28 Apr 2011 19:15:21 +0000 (13:15 -0600)]
handy.h: Link moved to perlhacktips
Karl Williamson [Thu, 28 Apr 2011 19:14:47 +0000 (13:14 -0600)]
README.os2: Fix pod errors
Karl Williamson [Wed, 27 Apr 2011 23:13:55 +0000 (17:13 -0600)]
pod/perlinterp.pod: Fix broken link
Karl Williamson [Wed, 27 Apr 2011 23:13:16 +0000 (17:13 -0600)]
ext/Devel-Peek/Peek.pm: Fix broken links
Karl Williamson [Wed, 27 Apr 2011 23:11:49 +0000 (17:11 -0600)]
dist/Cwd/lib/File/Spec/Win32.pm: Fix broken link
Karl Williamson [Wed, 27 Apr 2011 22:46:13 +0000 (16:46 -0600)]
version/Internals.pod: Fix broken links
Karl Williamson [Wed, 27 Apr 2011 22:44:14 +0000 (16:44 -0600)]
README.os2: fix broken link
Karl Williamson [Tue, 26 Apr 2011 22:23:27 +0000 (16:23 -0600)]
FieldHash.pm: Fix broken links
Karl Williamson [Tue, 26 Apr 2011 22:15:02 +0000 (16:15 -0600)]
perlsyn: fix broken link to this
The X<> have spaces between them which was causing the =head to
generate a different anchor than expected
Karl Williamson [Tue, 26 Apr 2011 22:13:37 +0000 (16:13 -0600)]
perlop.pod: Fix broken link
The reason there are links broken to this is that the X<>
were part of the heading, and the spaces between them are
significant
Karl Williamson [Tue, 26 Apr 2011 22:13:16 +0000 (16:13 -0600)]
perlfaq4: Fix broken link
Karl Williamson [Tue, 26 Apr 2011 22:12:11 +0000 (16:12 -0600)]
perlxs: Fix broken link
Karl Williamson [Tue, 26 Apr 2011 22:11:17 +0000 (16:11 -0600)]
perlthrtut: fix broken links
Karl Williamson [Tue, 26 Apr 2011 22:09:51 +0000 (16:09 -0600)]
perlhack: Fix broken link
Karl Williamson [Tue, 26 Apr 2011 22:01:56 +0000 (16:01 -0600)]
perlguts: Fix broken link
Karl Williamson [Tue, 26 Apr 2011 18:58:36 +0000 (12:58 -0600)]
README.os2: Fix broken links
Karl Williamson [Tue, 26 Apr 2011 18:53:39 +0000 (12:53 -0600)]
Internals.pod: Fix broken link
Karl Williamson [Tue, 26 Apr 2011 17:12:27 +0000 (11:12 -0600)]
overload.pm: Fix broken link
Karl Williamson [Tue, 26 Apr 2011 17:08:12 +0000 (11:08 -0600)]
perlform: Revise link
The link doesn't have to be to the exact text, can just name the function,
and doing so is clearer.
Karl Williamson [Tue, 26 Apr 2011 16:00:52 +0000 (10:00 -0600)]
configpm: Fix broken links
Karl Williamson [Tue, 26 Apr 2011 15:55:43 +0000 (09:55 -0600)]
perlsub.pod: Fix broken link
Karl Williamson [Tue, 26 Apr 2011 15:55:15 +0000 (09:55 -0600)]
perlguts: Link to internal doesn't need pod name
Karl Williamson [Tue, 26 Apr 2011 15:53:51 +0000 (09:53 -0600)]
perlfaq9: Add links to man pages
Karl Williamson [Tue, 26 Apr 2011 15:53:35 +0000 (09:53 -0600)]
perlfaq8: Add links to man pages
Karl Williamson [Tue, 26 Apr 2011 15:51:00 +0000 (09:51 -0600)]
perlebcdic.pod: Add man page section number to link