net: fec: fix rare tx timeout

[ Upstream commit 657ade07df72847f591ccdb36bd9b91ed0edbac3 ]

During certain heavy network loads TX could time out
with TX ring dump.
TX is sometimes never restarted after reaching
"tx_stop_threshold" because function "fec_enet_tx_queue"
only tests the first queue.

In addition the TX timeout callback function failed to
recover because it also operated only on the first queue.

Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/uncore: Fix PCI BDF address of M3UPI on SKX

[ Upstream commit 9d92cfeaf5215158d26d2991be7f7ff865cb98f3 ]

The counters on M3UPI Link 0 and Link 3 don't count properly, and writing
0 to these counters may causes system crash on some machines.

The PCI BDF addresses of the M3UPI in the current code are incorrect.

The correct addresses should be:

  D18:F1 0x204D
  D18:F2 0x204E
  D18:F5 0x204D

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Link: http://lkml.kernel.org/r/1537538826-55489-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/ring_buffer: Prevent concurent ring buffer access

[ Upstream commit cd6fb677ce7e460c25bdd66f689734102ec7d642 ]

Some of the scheduling tracepoints allow the perf_tp_event
code to write to ring buffer under different cpu than the
code is running on.

This results in corrupted ring buffer data demonstrated in
following perf commands:

  # perf record -e 'sched:sched_switch,sched:sched_wakeup' perf bench sched messaging
  # Running 'sched/messaging' benchmark:
  # 20 sender and receiver processes per group
  # 10 groups == 400 processes run

       Total time: 0.383 [sec]
  [ perf record: Woken up 8 times to write data ]
  0x42b890 [0]: failed to process type: -1765585640
  [ perf record: Captured and wrote 4.825 MB perf.data (29669 samples) ]

  # perf report --stdio
  0x42b890 [0]: failed to process type: -1765585640

The reason for the corruption are some of the scheduling tracepoints,
that have __perf_task dfined and thus allow to store data to another
cpu ring buffer:

  sched_waking
  sched_wakeup
  sched_wakeup_new
  sched_stat_wait
  sched_stat_sleep
  sched_stat_iowait
  sched_stat_blocked

The perf_tp_event function first store samples for current cpu
related events defined for tracepoint:

    hlist_for_each_entry_rcu(event, head, hlist_entry)
      perf_swevent_event(event, count, &data, regs);

And then iterates events of the 'task' and store the sample
for any task's event that passes tracepoint checks:

  ctx = rcu_dereference(task->perf_event_ctxp[perf_sw_context]);

  list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
    if (event->attr.type != PERF_TYPE_TRACEPOINT)
      continue;
    if (event->attr.config != entry->type)
      continue;

    perf_swevent_event(event, count, &data, regs);
  }

Above code can race with same code running on another cpu,
ending up with 2 cpus trying to store under the same ring
buffer, which is specifically not allowed.

This patch prevents the problem, by allowing only events with the same
current cpu to receive the event.

NOTE: this requires the use of (per-task-)per-cpu buffers for this
feature to work; perf-record does this.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
[peterz: small edits to Changelog]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: e6dab5ffab59 ("perf/trace: Add ability to set a target task for events")
Link: http://lkml.kernel.org/r/20180923161343.GB15054@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smsc95xx: Check for Wake-on-LAN modes

[ Upstream commit c530c471ba37bdd9fe1c7185b01455c00ae606fb ]

The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.

Fixes: e0e474a83c18 ("smsc95xx: add wol magic packet support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smsc75xx: Check for Wake-on-LAN modes

[ Upstream commit 9c734b2769a73eea2e9e9767c0e0bf839ff23679 ]

The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.

Fixes: 6c636503260d ("smsc75xx: add wol magic packet support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: Check for supported Wake-on-LAN Modes

[ Upstream commit f2750df1548bd8a2b060eb609fc43ca82811af4c ]

The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.

Fixes: 21ff2e8976b1 ("r8152: support WOL")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sr9800: Check for supported Wake-on-LAN modes

[ Upstream commit c5cb93e994ffb43b7b3b1ff10b9f928f54574a36 ]

The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.

Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lan78xx: Check for supported Wake-on-LAN modes

[ Upstream commit eb9ad088f96653a26b340f7c447c44cf023d5cdc ]

The driver supports a fair amount of Wake-on-LAN modes, but is not
checking that the user specified one that is supported.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Woojung Huh <Woojung.Huh@Microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ax88179_178a: Check for supported Wake-on-LAN modes

[ Upstream commit 5ba6b4aa9a410c5e2c6417df52b5e2118ea9b467 ]

The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.

Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

asix: Check for supported Wake-on-LAN modes

[ Upstream commit c4ce446e33d7a0e978256ac6fea4c80e59d9de5f ]

The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.

Fixes: 2e55cc7210fe ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Avoid constant logical operation warning in qed_vf_pf_acquire

[ Upstream commit 1c492a9d55ba99079210ed901dd8a5423f980487 ]

Clang warns when a constant is used in a boolean context as it thinks a
bitwise operation may have been intended.

drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: warning: use of logical
'&&' with constant operand [-Wconstant-logical-operand]
        if (!p_iov->b_pre_fp_hsi &&
                                 ^
drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: note: use '&' for a
bitwise operation
        if (!p_iov->b_pre_fp_hsi &&
                                 ^~
                                 &
drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: note: remove constant
to silence this warning
        if (!p_iov->b_pre_fp_hsi &&
                                ~^~
1 warning generated.

This has been here since commit 1fe614d10f45 ("qed: Relax VF firmware
requirements") and I am not entirely sure why since 0 isn't a special
case. Just remove the statement causing Clang to warn since it isn't
required.

Link: https://github.com/ClangBuiltLinux/linux/issues/126
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Avoid implicit enum conversion in qed_roce_mode_to_flavor

[ Upstream commit d3a315795b4ce8b105a64a90699103121bde04a8 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/net/ethernet/qlogic/qed/qed_roce.c:153:12: warning: implicit
conversion from enumeration type 'enum roce_mode' to different
enumeration type 'enum roce_flavor' [-Wenum-conversion]
                flavor = ROCE_V2_IPV6;
                       ~ ^~~~~~~~~~~~
drivers/net/ethernet/qlogic/qed/qed_roce.c:156:12: warning: implicit
conversion from enumeration type 'enum roce_mode' to different
enumeration type 'enum roce_flavor' [-Wenum-conversion]
                flavor = MAX_ROCE_MODE;
                       ~ ^~~~~~~~~~~~~
2 warnings generated.

Use the appropriate values from the expected type, roce_flavor:

ROCE_V2_IPV6 = RROCE_IPV6 = 2
MAX_ROCE_MODE = MAX_ROCE_FLAVOR = 3

While we're add it, ditch the local variable flavor, we can just return
the value directly from the switch statement.

Link: https://github.com/ClangBuiltLinux/linux/issues/125
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pxa168fb: prepare the clock

[ Upstream commit d85536cde91fcfed6fb8d983783bd2b92c843939 ]

Add missing prepare/unprepare operations for fbi->clk,
this fixes following kernel warning:

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:874 clk_core_enable+0x2c/0x1b0
  Enabling unprepared disp0_clk
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper Not tainted 4.18.0-rc8-00032-g02b43ddd4f21-dirty #25
  Hardware name: Marvell MMP2 (Device Tree Support)
  [<c010f7cc>] (unwind_backtrace) from [<c010cc6c>] (show_stack+0x10/0x14)
  [<c010cc6c>] (show_stack) from [<c011dab4>] (__warn+0xd8/0xf0)
  [<c011dab4>] (__warn) from [<c011db10>] (warn_slowpath_fmt+0x44/0x6c)
  [<c011db10>] (warn_slowpath_fmt) from [<c043898c>] (clk_core_enable+0x2c/0x1b0)
  [<c043898c>] (clk_core_enable) from [<c0439ec8>] (clk_core_enable_lock+0x18/0x2c)
  [<c0439ec8>] (clk_core_enable_lock) from [<c0436698>] (pxa168fb_probe+0x464/0x6ac)
  [<c0436698>] (pxa168fb_probe) from [<c04779a0>] (platform_drv_probe+0x48/0x94)
  [<c04779a0>] (platform_drv_probe) from [<c0475bec>] (driver_probe_device+0x328/0x470)
  [<c0475bec>] (driver_probe_device) from [<c0475de4>] (__driver_attach+0xb0/0x124)
  [<c0475de4>] (__driver_attach) from [<c0473c38>] (bus_for_each_dev+0x64/0xa0)
  [<c0473c38>] (bus_for_each_dev) from [<c0474ee0>] (bus_add_driver+0x1b8/0x230)
  [<c0474ee0>] (bus_add_driver) from [<c0476a20>] (driver_register+0xac/0xf0)
  [<c0476a20>] (driver_register) from [<c0102dd4>] (do_one_initcall+0xb8/0x1f0)
  [<c0102dd4>] (do_one_initcall) from [<c0b010a0>] (kernel_init_freeable+0x294/0x2e0)
  [<c0b010a0>] (kernel_init_freeable) from [<c07e9eb8>] (kernel_init+0x8/0x10c)
  [<c07e9eb8>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
  Exception stack(0xd008bfb0 to 0xd008bff8)
  bfa0:                                     00000000 00000000 00000000 00000000
  bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
  ---[ end trace c0af40f9e2ed7cb4 ]---

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[b.zolnierkie: enhance patch description a bit]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: SMP: fix crash in unpairing

[ Upstream commit cb28c306b93b71f2741ce1a5a66289db26715f4d ]

In case unpair_device() was called through mgmt interface at the same time
when pairing was in progress, Bluetooth kernel module crash was seen.

[  600.351225] general protection fault: 0000 [#1] SMP PTI
[  600.351235] CPU: 1 PID: 11096 Comm: btmgmt Tainted: G           OE     4.19.0-rc1+ #1
[  600.351238] Hardware name: Dell Inc. Latitude E5440/08RCYC, BIOS A18 05/14/2017
[  600.351272] RIP: 0010:smp_chan_destroy.isra.10+0xce/0x2c0 [bluetooth]
[  600.351276] Code: c0 0f 84 b4 01 00 00 80 78 28 04 0f 84 53 01 00 00 4d 85 ed 0f 85 ab 00 00 00 48 8b 08 48 8b 50 08 be 10 00 00 00 48 89 51 08 <48> 89 0a 48 b9 00 02 00 00 00 00 ad de 48 89 48 08 48 8b 83 00 01
[  600.351279] RSP: 0018:ffffa9be839b3b50 EFLAGS: 00010246
[  600.351282] RAX: ffff9c999ac565a0 RBX: ffff9c9996e98c00 RCX: ffff9c999aa28b60
[  600.351285] RDX: dead000000000200 RSI: 0000000000000010 RDI: ffff9c999e403500
[  600.351287] RBP: ffffa9be839b3b70 R08: 0000000000000000 R09: ffffffff92a25c00
[  600.351290] R10: ffffa9be839b3ae8 R11: 0000000000000001 R12: ffff9c995375b800
[  600.351292] R13: 0000000000000000 R14: ffff9c99619a5000 R15: ffff9c9962a01c00
[  600.351295] FS:  00007fb2be27c700(0000) GS:ffff9c999e880000(0000) knlGS:0000000000000000
[  600.351298] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  600.351300] CR2: 00007fb2bdadbad0 CR3: 000000041c328001 CR4: 00000000001606e0
[  600.351302] Call Trace:
[  600.351325]  smp_failure+0x4f/0x70 [bluetooth]
[  600.351345]  smp_cancel_pairing+0x74/0x80 [bluetooth]
[  600.351370]  unpair_device+0x1c1/0x330 [bluetooth]
[  600.351399]  hci_sock_sendmsg+0x960/0x9f0 [bluetooth]
[  600.351409]  ? apparmor_socket_sendmsg+0x1e/0x20
[  600.351417]  sock_sendmsg+0x3e/0x50
[  600.351422]  sock_write_iter+0x85/0xf0
[  600.351429]  do_iter_readv_writev+0x12b/0x1b0
[  600.351434]  do_iter_write+0x87/0x1a0
[  600.351439]  vfs_writev+0x98/0x110
[  600.351443]  ? ep_poll+0x16d/0x3d0
[  600.351447]  ? ep_modify+0x73/0x170
[  600.351451]  do_writev+0x61/0xf0
[  600.351455]  ? do_writev+0x61/0xf0
[  600.351460]  __x64_sys_writev+0x1c/0x20
[  600.351465]  do_syscall_64+0x5a/0x110
[  600.351471]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  600.351474] RIP: 0033:0x7fb2bdb62fe0
[  600.351477] Code: 73 01 c3 48 8b 0d b8 6e 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 69 c7 2c 00 00 75 10 b8 14 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 de 80 01 00 48 89 04 24
[  600.351479] RSP: 002b:00007ffe062cb8f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
[  600.351484] RAX: ffffffffffffffda RBX: 000000000255b3d0 RCX: 00007fb2bdb62fe0
[  600.351487] RDX: 0000000000000001 RSI: 00007ffe062cb920 RDI: 0000000000000004
[  600.351490] RBP: 00007ffe062cb920 R08: 000000000255bd80 R09: 0000000000000000
[  600.351494] R10: 0000000000000353 R11: 0000000000000246 R12: 0000000000000001
[  600.351497] R13: 00007ffe062cbbe0 R14: 0000000000000000 R15: 0000000000000000
[  600.351501] Modules linked in: algif_hash algif_skcipher af_alg cmac ipt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo iptable_nat nf_nat_ipv4 xt_addrtype iptable_filter ip_tables xt_conntrack x_tables nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c br_netfilter bridge stp llc overlay arc4 nls_iso8859_1 dm_crypt intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp dell_laptop kvm_intel crct10dif_pclmul dell_smm_hwmon crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper intel_cstate intel_rapl_perf uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev media hid_multitouch input_leds joydev serio_raw dell_wmi snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic dell_smbios dcdbas sparse_keymap
[  600.351569]  snd_hda_intel btusb snd_hda_codec btrtl btbcm btintel snd_hda_core bluetooth(OE) snd_hwdep snd_pcm iwlmvm ecdh_generic wmi_bmof dell_wmi_descriptor snd_seq_midi mac80211 snd_seq_midi_event lpc_ich iwlwifi snd_rawmidi snd_seq snd_seq_device snd_timer cfg80211 snd soundcore mei_me mei dell_rbtn dell_smo8800 mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid hid i915 nouveau kvmgt vfio_mdev mdev vfio_iommu_type1 vfio kvm irqbypass i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt mxm_wmi psmouse ahci sdhci_pci cqhci libahci fb_sys_fops sdhci drm e1000e video wmi
[  600.351637] ---[ end trace e49e9f1df09c94fb ]---
[  600.351664] RIP: 0010:smp_chan_destroy.isra.10+0xce/0x2c0 [bluetooth]
[  600.351666] Code: c0 0f 84 b4 01 00 00 80 78 28 04 0f 84 53 01 00 00 4d 85 ed 0f 85 ab 00 00 00 48 8b 08 48 8b 50 08 be 10 00 00 00 48 89 51 08 <48> 89 0a 48 b9 00 02 00 00 00 00 ad de 48 89 48 08 48 8b 83 00 01
[  600.351669] RSP: 0018:ffffa9be839b3b50 EFLAGS: 00010246
[  600.351672] RAX: ffff9c999ac565a0 RBX: ffff9c9996e98c00 RCX: ffff9c999aa28b60
[  600.351674] RDX: dead000000000200 RSI: 0000000000000010 RDI: ffff9c999e403500
[  600.351676] RBP: ffffa9be839b3b70 R08: 0000000000000000 R09: ffffffff92a25c00
[  600.351679] R10: ffffa9be839b3ae8 R11: 0000000000000001 R12: ffff9c995375b800
[  600.351681] R13: 0000000000000000 R14: ffff9c99619a5000 R15: ffff9c9962a01c00
[  600.351684] FS:  00007fb2be27c700(0000) GS:ffff9c999e880000(0000) knlGS:0000000000000000
[  600.351686] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  600.351689] CR2: 00007fb2bdadbad0 CR3: 000000041c328001 CR4: 00000000001606e0

Crash happened because list_del_rcu() was called twice for smp->ltk. This
was possible if unpair_device was called right after ltk was generated
but before keys were distributed.

In this commit smp_cancel_pairing was refactored to cancel pairing if it
is in progress and otherwise just removes keys. Once keys are removed from
rcu list, pointers to smp context's keys are set to NULL to make sure
removed list items are not accessed later.

This commit also adjusts the functionality of mgmt unpair_device() little
bit. Previously pairing was canceled only if pairing was in state that
keys were already generated. With this commit unpair_device() cancels
pairing already in earlier states.

Bug was found by fuzzing kernel SMP implementation using Synopsys
Defensics.

Reported-by: Pekka Oikarainen <pekka.oikarainen@synopsys.com>
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211_hwsim: do not omit multicast announce of first added radio

[ Upstream commit 28ef8b49a338dc1844e86b7954cfffc7dfa2660a ]

The allocation of hwsim radio identifiers uses a post-increment from 0,
so the first radio has idx 0. This idx is explicitly excluded from
multicast announcements ever since, but it is unclear why.

Drop that idx check and announce the first radio as well. This makes
userspace happy if it relies on these events.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nl80211: Fix possible Spectre-v1 for NL80211_TXRATE_HT

[ Upstream commit 30fe6d50eb088783c8729c7d930f65296b2b3fa7 ]

Use array_index_nospec() to sanitize ridx with respect to speculation.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: fsl: qe: Fix copy/paste bug in ucc_get_tdm_sync_shift()

[ Upstream commit 96fc74333f84cfdf8d434c6c07254e215e2aad00 ]

There is a copy and paste bug so we accidentally use the RX_ shift when
we're in TX_ mode.

Fixes: bb8b2062aff3 ("fsl/qe: setup clock source for TDM mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
(cherry picked from commit 3cb31b634052ed458922e0c8e2b4b093d7fb60b9)
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: fsl: qbman: qman: avoid allocating from non existing gen_pool

[ Upstream commit 64e9e22e68512da8df3c9a7430f07621e48db3c2 ]

If the qman driver didn't probe, calling qman_alloc_fqid_range,
qman_alloc_pool_range or qman_alloc_cgrid_range (as done in dpaa_eth) will
pass a NULL pointer to gen_pool_alloc, leading to a NULL pointer
dereference.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
(cherry picked from commit f72487a2788aa70c3aee1d0ebd5470de9bac953a)
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macb: Clean 64b dma addresses if they are not detected

[ Upstream commit e1e5d8a9fe737d94ccc0ccbaf0c97f69a8f3e000 ]

Clear ADDR64 dma bit in DMACFG register in case that HW_DMA_CAP_64B is
not detected on 64bit system.
The issue was observed when bootloader(u-boot) does not check macb
feature at DCFG6 register (DAW64_OFFSET) and enabling 64bit dma support
by default. Then macb driver is reading DMACFG register back and only
adding 64bit dma configuration but not cleaning it out.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM63xx: Fix incorrect interrupt specifiers

[ Upstream commit 3ab97942d0213b6583a5408630a8cbbfbf54730f ]

A number of our interrupts were incorrectly specified, fix both the PPI
and SPI interrupts to be correct.

Fixes: b5762cacc411 ("ARM: bcm63138: add NAND DT support")
Fixes: 46d4bca0445a ("ARM: BCM63XX: add BCM63138 minimal Device Tree")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: validate template mode

[ Upstream commit 32bf94fb5c2ec4ec842152d0e5937cd4bb6738fa ]

XFRM mode parameters passed as part of the user templates
in the IP_XFRM_POLICY are never properly validated. Passing
values other than valid XFRM modes can cause stack-out-of-bounds
reads to occur later in the XFRM processing:

[  140.535608] ================================================================
[  140.543058] BUG: KASAN: stack-out-of-bounds in xfrm_state_find+0x17e4/0x1cc4
[  140.550306] Read of size 4 at addr ffffffc0238a7a58 by task repro/5148
[  140.557369]
[  140.558927] Call trace:
[  140.558936] dump_backtrace+0x0/0x388
[  140.558940] show_stack+0x24/0x30
[  140.558946] __dump_stack+0x24/0x2c
[  140.558949] dump_stack+0x8c/0xd0
[  140.558956] print_address_description+0x74/0x234
[  140.558960] kasan_report+0x240/0x264
[  140.558963] __asan_report_load4_noabort+0x2c/0x38
[  140.558967] xfrm_state_find+0x17e4/0x1cc4
[  140.558971] xfrm_resolve_and_create_bundle+0x40c/0x1fb8
[  140.558975] xfrm_lookup+0x238/0x1444
[  140.558977] xfrm_lookup_route+0x48/0x11c
[  140.558984] ip_route_output_flow+0x88/0xc4
[  140.558991] raw_sendmsg+0xa74/0x266c
[  140.558996] inet_sendmsg+0x258/0x3b0
[  140.559002] sock_sendmsg+0xbc/0xec
[  140.559005] SyS_sendto+0x3a8/0x5a8
[  140.559008] el0_svc_naked+0x34/0x38
[  140.559009]
[  140.592245] page dumped because: kasan: bad access detected
[  140.597981] page_owner info is not active (free page?)
[  140.603267]
[  140.653503] ================================================================

Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8799/1: mm: fix pci_ioremap_io() offset check

[ Upstream commit 3a58ac65e2d7969bcdf1b6acb70fa4d12a88e53e ]

IO_SPACE_LIMIT is the ending address of the PCI IO space, i.e
something like 0xfffff (and not 0x100000).

Therefore, when offset = 0xf0000 is passed as argument, this function
fails even though the offset + SZ_64K fits below the
IO_SPACE_LIMIT. This makes the last chunk of 64 KB of the I/O space
not usable as it cannot be mapped.

This patch fixes that by substracing 1 to offset + SZ_64K, so that we
compare the addrss of the last byte of the I/O space against
IO_SPACE_LIMIT instead of the address of the first byte of what is
after the I/O space.

Fixes: c2794437091a4 ("ARM: Add fixed PCI i/o mapping")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: TDLS: fix skb queue/priority assignment

[ Upstream commit cb59bc14e830028d2244861216df038165d7625d ]

If the TDLS setup happens over a connection to an AP that
doesn't have QoS, we nevertheless assign a non-zero TID
(skb->priority) and queue mapping, which may confuse us or
drivers later.

Fix it by just assigning the special skb->priority and then
using ieee80211_select_queue() just like other data frames
would go through.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cfg80211: Address some corner cases in scan result channel updating

[ Upstream commit 119f94a6fefcc76d47075b83d2b73d04c895df78 ]

cfg80211_get_bss_channel() is used to update the RX channel based on the
available frame payload information (channel number from DSSS Parameter
Set element or HT Operation element). This is needed on 2.4 GHz channels
where frames may be received on neighboring channels due to overlapping
frequency range.

This might of some use on the 5 GHz band in some corner cases, but
things are more complex there since there is no n:1 or 1:n mapping
between channel numbers and frequencies due to multiple different
starting frequencies in different operating classes. This could result
in ieee80211_channel_to_frequency() returning incorrect frequency and
ieee80211_get_channel() returning incorrect channel information (or
indication of no match). In the previous implementation, this could
result in some scan results being dropped completely, e.g., for the 4.9
GHz channels. That prevented connection to such BSSs.

Fix this by using the driver-provided channel pointer if
ieee80211_get_channel() does not find matching channel data for the
channel number in the frame payload and if the scan is done with 5 MHz
or 10 MHz channel bandwidth. While doing this, also add comments
describing what the function is trying to achieve to make it easier to
understand what happens here and why.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: fix pending queue hang due to TX_DROP

[ Upstream commit 6eae4a6c2be387fec41b0d2782c4fffb57159498 ]

In our environment running lots of mesh nodes, we are seeing the
pending queue hang periodically, with the debugfs queues file showing
lines such as:

    00: 0x00000000/348

i.e. there are a large number of frames but no stop reason set.

One way this could happen is if queue processing from the pending
tasklet exited early without processing all frames, and without having
some future event (incoming frame, stop reason flag, ...) to reschedule
it.

Exactly this can occur today if ieee80211_tx() returns false due to
packet drops or power-save buffering in the tx handlers.  In the
past, this function would return true in such cases, and the change
to false doesn't seem to be intentional.  Fix this case by reverting
to the previous behavior.

Fixes: bb42f2d13ffc ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue")
Signed-off-by: Bob Copeland <bobcopeland@fb.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cfg80211: reg: Init wiphy_idx in regulatory_hint_core()

[ Upstream commit 24f33e64fcd0d50a4b1a8e5b41bd0257aa66b0e8 ]

Core regulatory hints didn't set wiphy_idx to WIPHY_IDX_INVALID. Since
the regulatory request is zeroed, wiphy_idx was always implicitly set to
0. This resulted in updating only phy #0.
Fix that.

Fixes: 806a9e39670b ("cfg80211: make regulatory_request use wiphy_idx instead of wiphy")
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
[add fixes tag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: Always report TX status

[ Upstream commit 8682250b3c1b75a45feb7452bc413d004cfe3778 ]

If a frame is dropped for any reason, mac80211 wouldn't report the TX
status back to user space.

As the user space may rely on the TX_STATUS to kick its state
machines, resends etc, it's better to just report this frame as not
acked instead.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm6: call kfree_skb when skb is toobig

[ Upstream commit 215ab0f021c9fea3c18b75e7d522400ee6a49990 ]

After commit d6990976af7c5d8f55903bfb4289b6fb030bf754 ("vti6: fix PMTU caching
and reporting on xmit"), some too big skbs might be potentially passed down to
__xfrm6_output, causing it to fail to transmit but not free the skb, causing a
leak of skb, and consequentially a leak of dst references.

After running pmtu.sh, that shows as failure to unregister devices in a namespace:

[  311.397671] unregister_netdevice: waiting for veth_b to become free. Usage count = 1

The fix is to call kfree_skb in case of transmit failures.

Fixes: dd767856a36e ("xfrm6: Don't call icmpv6_send on local error")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Validate address prefix lengths in the xfrm selector.

[ Upstream commit 07bf7908950a8b14e81aa1807e3c667eab39287a ]

We don't validate the address prefix lengths in the xfrm
selector we got from userspace. This can lead to undefined
behaviour in the address matching functions if the prefix
is too big for the given address family. Fix this by checking
the prefixes and refuse SA/policy insertation when a prefix
is invalid.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Air Icy <icytxw@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.9.135

HV: properly delay KVP packets when negotiation is in progress

commit a3ade8cc474d848676278660e65f5af1e9e094d9 upstream.

The host may send multiple negotiation packets
(due to timeout) before the KVP user-mode daemon
is connected. KVP user-mode daemon is connected.
We need to defer processing those packets
until the daemon is negotiated and connected.
It's okay for guest to respond
to all negotiation packets.

In addition, the host may send multiple staged
KVP requests as soon as negotiation is done.
We need to properly process those packets using one
tasklet for exclusive access to ring buffer.

This patch is based on the work of
Nick Meier <Nick.Meier@microsoft.com>.

The above is the original changelog of
a3ade8cc474d ("HV: properly delay KVP packets when negotiation is in progress"

Here I re-worked the original patch because the mainline version
can't work for the linux-4.4.y branch, on which channel->callback_event
doesn't exist yet. In the mainline, channel->callback_event was added by:
631e63a9f346 ("vmbus: change to per channel tasklet"). Here we don't want
to backport it to v4.4, as it requires extra supporting changes and fixes,
which are unnecessary as to the KVP bug we're trying to resolve.

NOTE: before this patch is used, we should cherry-pick the other related
3 patches from the mainline first:

The background of this backport request is that: recently Wang Jian reported
some KVP issues: https://github.com/LIS/lis-next/issues/593:
e.g. the /var/lib/hyperv/.kvp_pool_* files can not be updated, and sometimes
if the hv_kvp_daemon doesn't timely start, the host may not be able to query
the VM's IP address via KVP.

Reported-by: Wang Jian <jianjian.wang1@gmail.com>
Tested-by: Wang Jian <jianjian.wang1@gmail.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: avoid running out of journal credits when appending to an inline file

commit 8bc1379b82b8e809eef77a9fedbb75c6c297be19 upstream.

Use a separate journal transaction if it turns out that we need to
convert an inline file to use an data block.  Otherwise we could end
up failing due to not having journal credits.

This addresses CVE-2018-10883.

https://bugzilla.kernel.org/show_bug.cgi?id=200071

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
[fengc@google.com: 4.4 and 4.9 backport: adjust context]
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/cputime: Fix ksoftirqd cputime accounting regression

commit 25e2d8c1b9e327ed260edd13169cc22bc7a78bc6 upstream.

irq_time_read() returns the irqtime minus the ksoftirqd time. This
is necessary because irq_time_read() is used to substract the IRQ time
from the sum_exec_runtime of a task. If we were to include the softirq
time of ksoftirqd, this task would substract its own CPU time everytime
it updates ksoftirqd->sum_exec_runtime which would therefore never
progress.

But this behaviour got broken by:

  a499a5a14db ("sched/cputime: Increment kcpustat directly on irqtime account")

... which now includes ksoftirqd softirq time in the time returned by
irq_time_read().

This has resulted in wrong ksoftirqd cputime reported to userspace
through /proc/stat and thus "top" not showing ksoftirqd when it should
after intense networking load.

ksoftirqd->stime happens to be correct but it gets scaled down by
sum_exec_runtime through task_cputime_adjusted().

To fix this, just account the strict IRQ time in a separate counter and
use it to report the IRQ time.

Reported-and-tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1493129448-5356-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/cputime: Increment kcpustat directly on irqtime account

commit a499a5a14dbd1d0315a96fc62a8798059325e9e6 upstream.

The irqtime is accounted is nsecs and stored in
cpu_irq_time.hardirq_time and cpu_irq_time.softirq_time. Once the
accumulated amount reaches a new jiffy, this one gets accounted to the
kcpustat.

This was necessary when kcpustat was stored in cputime_t, which could at
worst have jiffies granularity. But now kcpustat is stored in nsecs
so this whole discretization game with temporary irqtime storage has
become unnecessary.

We can now directly account the irqtime to the kcpustat.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1485832191-26889-17-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macintosh/rack-meter: Convert cputime64_t use to u64

commit 564b733c899f4e12a64946658960fce80cad0b05 upstream.

cputime_t is going to be removed and replaced by nsecs units,
so convert the drivers/macintosh/rack-meter.c use to u64..

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1485832191-26889-5-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/cputime: Convert kcpustat to nsecs

commit 7fb1327ee9b92fca27662f9b9d60c7c3376d6c69 upstream.

Kernel CPU stats are stored in cputime_t which is an architecture
defined type, and hence a bit opaque and requiring accessors and mutators
for any operation.

Converting them to nsecs simplifies the code and is one step toward
the removal of cputime_t in the core code.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1485832191-26889-4-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[colona: minor conflict as 527b0a76f41d ("sched/cpuacct: Avoid %lld seq_printf
 warning") is missing from v4.9]
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: serial: fix oops when data rx'd after close

commit daa35bd95634a2a2d72d1049c93576a02711cb1a upstream.

When the gadget serial device has no associated TTY, do not pass any
received data into the TTY layer for processing; simply drop it instead.
This prevents the TTY layer from calling back into the gadget serial
driver, which will then crash in e.g. gs_write_room() due to lack of
gadget serial device to TTY association (i.e. a NULL pointer dereference).

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: quirks: fix support for Apple Magic Keyboards

Commit b6cc0ba2cbf4 (HID: add support for Apple Magic Keyboards)
backported support for the Magic Keyboard over Bluetooth, but did not
add the BT_VENDOR_ID_APPLE to hid_have_special_driver[] so the hid-apple
driver is never loaded and Fn key does not work at all.

Adding BT_VENDOR_ID_APPLE to hid_have_special_driver[] is not needed
after commit e04a0442d33b (HID: core: remove the absolute need of
hid_have_special_driver[]), so 4.16 kernels and newer does not need it.

Fixes: b6cc0ba2cbf4 (HID: add support for Apple Magic Keyboards)
Bugzilla-id: https://bugzilla.kernel.org/show_bug.cgi?id=99881
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: build: Don't set CROSS_COMPILE in arch's Makefile

commit 40660f1fcee8d524a60b5101538e42b1f39f106d upstream.

There's not much sense in doing that because if user or
his build-system didn't set CROSS_COMPILE we still may
very well make incorrect guess.

But as it turned out setting CROSS_COMPILE is not as harmless
as one may think: with recent changes that implemented automatic
discovery of __host__ gcc features unconditional setup of
CROSS_COMPILE leads to failures on execution of "make xxx_defconfig"
with absent cross-compiler, for more info see [1].

Set CROSS_COMPILE as well gets in the way if we want only to build
.dtb's (again with absent cross-compiler which is not really needed
for building .dtb's), see [2].

Note, we had to change LIBGCC assignment type from ":=" to "="
so that is is resolved on its usage, otherwise if it is resolved
at declaration time with missing CROSS_COMPILE we're getting this
error message from host GCC:

| gcc: error: unrecognized command line option -mmedium-calls
| gcc: error: unrecognized command line option -mno-sdata

[1] http://lists.infradead.org/pipermail/linux-snps-arc/2018-September/004308.html
[2] http://lists.infradead.org/pipermail/linux-snps-arc/2018-September/004320.html

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: build: Get rid of toolchain check

commit 615f64458ad890ef94abc879a66d8b27236e733a upstream.

This check is very naive: we simply test if GCC invoked without
"-mcpu=XXX" has ARC700 define set. In that case we think that GCC
was built with "--with-cpu=arc700" and has libgcc built for ARC700.

Otherwise if ARC700 is not defined we think that everythng was built
for ARCv2.

But in reality our life is much more interesting.

1. Regardless of GCC configuration (i.e. what we pass in "--with-cpu"
   it may generate code for any ARC core).

2. libgcc might be built with explicitly specified "--mcpu=YYY"

That's exactly what happens in case of multilibbed toolchains:
 - GCC is configured with default settings
 - All the libs built for many different CPU flavors

I.e. that check gets in the way of usage of multilibbed
toolchains. And even non-multilibbed toolchains are affected.
OpenEmbedded also builds GCC without "--with-cpu" because
each and every target component later is compiled with explicitly
set "-mcpu=ZZZ".

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: check for seqadj ext existence before adding it in nf_nat_setup_info

commit ab6dd1beac7be3c17f8bf3d38bdf29ecb7293f1e upstream.

Commit 4440a2ab3b9f ("netfilter: synproxy: Check oom when adding synproxy
and seqadj ct extensions") wanted to drop the packet when it fails to add
seqadj ext due to no memory by checking if nfct_seqadj_ext_add returns
NULL.

But that nfct_seqadj_ext_add returns NULL can also happen when seqadj ext
already exists in a nf_conn. It will cause that userspace protocol doesn't
work when both dnat and snat are configured.

Li Shuang found this issue in the case:

Topo:
   ftp client                   router                  ftp server
  10.167.131.2  <-> 10.167.131.254  10.167.141.254 <-> 10.167.141.1

Rules:
  # iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 21 -j \
    DNAT --to-destination 10.167.141.1
  # iptables -t nat -A POSTROUTING -o eth2 -p tcp -m tcp --dport 21 -j \
    SNAT --to-source 10.167.141.254

In router, when both dnat and snat are added, nf_nat_setup_info will be
called twice. The packet can be dropped at the 2nd time for DNAT due to
seqadj ext is already added at the 1st time for SNAT.

This patch is to fix it by checking for seqadj ext existence before adding
it, so that the packet will not be dropped if seqadj ext already exists.

Note that as Florian mentioned, as a long term, we should review ext_add()
behaviour, it's better to return a pointer to the existing ext instead.

Fixes: 4440a2ab3b9f ("netfilter: synproxy: Check oom when adding synproxy and seqadj ct extensions")
Reported-by: Li Shuang <shuali@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: Preserve _PAGE_DEVMAP across mprotect() calls

commit 4628a64591e6cee181237060961e98c615c33966 upstream.

Currently _PAGE_DEVMAP bit is not preserved in mprotect(2) calls. As a
result we will see warnings such as:

BUG: Bad page map in process JobWrk0013  pte:800001803875ea25 pmd:7624381067
addr:00007f0930720000 vm_flags:280000f9 anon_vma:          (null) mapping:ffff97f2384056f0 index:0
file:457-000000fe00000030-00000009-000000ca-00000001_2001.fileblock fault:xfs_filemap_fault [xfs] mmap:xfs_file_mmap [xfs] readpage:          (null)
CPU: 3 PID: 15848 Comm: JobWrk0013 Tainted: G        W          4.12.14-2.g7573215-default #1 SLE12-SP4 (unreleased)
Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.01.00.0833.051120182255 05/11/2018
Call Trace:
 dump_stack+0x5a/0x75
 print_bad_pte+0x217/0x2c0
 ? enqueue_task_fair+0x76/0x9f0
 _vm_normal_page+0xe5/0x100
 zap_pte_range+0x148/0x740
 unmap_page_range+0x39a/0x4b0
 unmap_vmas+0x42/0x90
 unmap_region+0x99/0xf0
 ? vma_gap_callbacks_rotate+0x1a/0x20
 do_munmap+0x255/0x3a0
 vm_munmap+0x54/0x80
 SyS_munmap+0x1d/0x30
 do_syscall_64+0x74/0x150
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
...

when mprotect(2) gets used on DAX mappings. Also there is a wide variety
of other failures that can result from the missing _PAGE_DEVMAP flag
when the area gets used by get_user_pages() later.

Fix the problem by including _PAGE_DEVMAP in a set of flags that get
preserved by mprotect(2).

Fixes: 69660fd797c3 ("x86, mm: introduce _PAGE_DEVMAP")
Fixes: ebd31197931d ("powerpc/mm: Add devmap support for ppc64")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mremap: properly flush TLB before releasing the page

commit eb66ae030829605d61fbef1909ce310e29f78821 upstream.

Jann Horn points out that our TLB flushing was subtly wrong for the
mremap() case.  What makes mremap() special is that we don't follow the
usual "add page to list of pages to be freed, then flush tlb, and then
free pages".  No, mremap() obviously just _moves_ the page from one page
table location to another.

That matters, because mremap() thus doesn't directly control the
lifetime of the moved page with a freelist: instead, the lifetime of the
page is controlled by the page table locking, that serializes access to
the entry.

As a result, we need to flush the TLB not just before releasing the lock
for the source location (to avoid any concurrent accesses to the entry),
but also before we release the destination page table lock (to avoid the
TLB being flushed after somebody else has already done something to that
page).

This also makes the whole "need_flush" logic unnecessary, since we now
always end up flushing the TLB for every valid entry.

Reported-and-tested-by: Jann Horn <jannh@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/amd: Return devid as alias for ACPI HID devices

[ Upstream commit 5ebb1bc2d63d90dd204169e21fd7a0b4bb8c776e ]

ACPI HID devices do not actually have an alias for
them in the IVRS. But dev_data->alias is still used
for indexing into the IOMMU device table for devices
being handled by the IOMMU. So for ACPI HID devices,
we simply return the corresponding devid as an alias,
as parsed from IVRS table.

Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Fixes: 2bf9a0a12749 ('iommu/amd: Add iommu support for ACPI HID devices')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/tm: Avoid possible userspace r1 corruption on reclaim

[ Upstream commit 96dc89d526ef77604376f06220e3d2931a0bfd58 ]

Current we store the userspace r1 to PACATMSCRATCH before finally
saving it to the thread struct.

In theory an exception could be taken here (like a machine check or
SLB miss) that could write PACATMSCRATCH and hence corrupt the
userspace r1. The SLB fault currently doesn't touch PACATMSCRATCH, but
others do.

We've never actually seen this happen but it's theoretically
possible. Either way, the code is fragile as it is.

This patch saves r1 to the kernel stack (which can't fault) before we
turn MSR[RI] back on. PACATMSCRATCH is still used but only with
MSR[RI] off. We then copy r1 from the kernel stack to the thread
struct once we have MSR[RI] back on.

Suggested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/tm: Fix userspace r13 corruption

[ Upstream commit cf13435b730a502e814c63c84d93db131e563f5f ]

When we treclaim we store the userspace checkpointed r13 to a scratch
SPR and then later save the scratch SPR to the user thread struct.

Unfortunately, this doesn't work as accessing the user thread struct
can take an SLB fault and the SLB fault handler will write the same
scratch SPRG that now contains the userspace r13.

To fix this, we store r13 to the kernel stack (which can't fault)
before we access the user thread struct.

Found by running P8 guest + powervm + disable_1tb_segments + TM. Seen
as a random userspace segfault with r13 looking like a kernel address.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4: Use cpumask_available for eq->affinity_mask

[ Upstream commit 8ac1ee6f4d62e781e3b3fd8b9c42b70371427669 ]

Clang warns that the address of a pointer will always evaluated as true
in a boolean context:

drivers/net/ethernet/mellanox/mlx4/eq.c:243:11: warning: address of
array 'eq->affinity_mask' will always evaluate to 'true'
[-Wpointer-bool-conversion]
        if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask))
            ~~~~~^~~~~~~~~~~~~
1 warning generated.

Use cpumask_available, introduced in commit f7e30f01a9e2 ("cpumask: Add
helper cpumask_available()"), which does the proper checking and avoids
this warning.

Link: https://github.com/ClangBuiltLinux/linux/issues/86
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sd: don't crash the host on invalid commands

[ Upstream commit f1f1fadacaf08b7cf11714c0c29f8fa4d4ef68a9 ]

When sd_init_command() get's a command with a unknown req_op() it crashes the
system via BUG().

This makes debugging the actual reason for the broken request cmd_flags pretty
hard as the system is down before it's able to write out debugging data on the
serial console or the trace buffer.

Change the BUG() to a WARN_ON() and return BLKPREP_KILL to fail gracefully and
return an I/O error to the producer of the request.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: mali-dp: Call drm_crtc_vblank_reset on device init

[ Upstream commit 69be1984ded00a11b1ed0888c6d8e4f35370372f ]

Currently, if userspace calls drm_wait_vblank before the crtc is
activated the crtc vblank_enable hook is called, which in case of
malidp driver triggers some warninngs. This happens because on
device init we don't inform the drm core about the vblank state
by calling drm_crtc_vblank_on/off/reset which together with
drm_vblank_get have some magic that prevents calling drm_vblank_enable
when crtc is off.

Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ravb: do not write 1 to reserved bits

[ Upstream commit 2fe397a3959de8a472f165e6d152f64cb77fa2cc ]

EtherAVB hardware requires 0 to be written to status register bits in
order to clear them, however, care must be taken not to:

1. Clear other bits, by writing zero to them
2. Write one to reserved bits

This patch corrects the ravb driver with respect to the second point above.
This is done by defining reserved bit masks for the affected registers and,
after auditing the code, ensure all sites that may write a one to a
reserved bit use are suitably masked.

Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: atakbd - fix Atari CapsLock behaviour

[ Upstream commit 52d2c7bf7c90217fbe875d2d76f310979c48eb83 ]

The CapsLock key on Atari keyboards is not a toggle, it does send the
normal make and break scancodes.

Drop the CapsLock toggle handling code, which did cause the CapsLock
key to merely act as a Shift key.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: atakbd - fix Atari keymap

[ Upstream commit 9e62df51be993035c577371ffee5477697a56aad ]

Fix errors in Atari keymap (mostly in keypad, help and undo keys).

Patch provided on debian-68k ML by Andreas Schwab <schwab@linux-m68k.org>,
keymap array size and unhandled scancode limit adjusted to 0x73 by me.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ibmvscsis: Ensure partition name is properly NUL terminated

[ Upstream commit adad633af7b970bfa5dd1b624a4afc83cac9b235 ]

While reviewing another part of the code, Kees noticed that the strncpy of the
partition name might not always be NUL terminated. Switch to using strscpy
which does this safely.

Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ibmvscsis: Fix a stringop-overflow warning

[ Upstream commit d792d4c4fc866ae224b0b0ca2aabd87d23b4d6cc ]

There's currently a warning about string overflow with strncat:

drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function 'ibmvscsis_probe':
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:3479:2: error: 'strncat' specified
bound 64 equals destination size [-Werror=stringop-overflow=]
  strncat(vscsi->eye, vdev->name, MAX_EYE);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Switch to a single snprintf instead of a strcpy + strcat to handle this
cleanly.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs

[ Upstream commit 3b7d96a0dbb6b630878597a1838fc39f808b761b ]

The 32k clocksource is NONSTOP for non-am43 SoCs. Hence
add the flag for all the other SoCs.

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: fix hardif_neigh refcount on queue_work() failure

[ Upstream commit 4c4af6900844ab04c9434c972021d7b48610e06a ]

The hardif_neigh refcounter is to be decreased by the queued work and
currently is never decreased if the queue_work() call fails.
Fix by checking the queue_work() return value and decrease refcount
if necessary.

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: fix backbone_gw refcount on queue_work() failure

[ Upstream commit 5af96b9c59c72fb2af2d19c5cc2f3cdcee391dff ]

The backbone_gw refcounter is to be decreased by the queued work and
currently is never decreased if the queue_work() call fails.
Fix by checking the queue_work() return value and decrease refcount
if necessary.

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Prevent duplicated tvlv handler

[ Upstream commit ae3cdc97dc10c7a3b31f297dab429bfb774c9ccb ]

The function batadv_tvlv_handler_register is responsible for adding new
tvlv_handler to the handler_list. It first checks whether the entry
already is in the list or not. If it is, then the creation of a new entry
is aborted.

But the lock for the list is only held when the list is really modified.
This could lead to duplicated entries because another context could create
an entry with the same key between the check and the list manipulation.

The check and the manipulation of the list must therefore be in the same
locked code section.

Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Prevent duplicated global TT entry

[ Upstream commit e7136e48ffdfb9f37b0820f619380485eb407361 ]

The function batadv_tt_global_orig_entry_add is responsible for adding new
tt_orig_list_entry to the orig_list. It first checks whether the entry
already is in the list or not. If it is, then the creation of a new entry
is aborted.

But the lock for the list is only held when the list is really modified.
This could lead to duplicated entries because another context could create
an entry with the same key between the check and the list manipulation.

The check and the manipulation of the list must therefore be in the same
locked code section.

Fixes: d657e621a0f5 ("batman-adv: add reference counting for type batadv_tt_orig_list_entry")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Prevent duplicated softif_vlan entry

[ Upstream commit 94cb82f594ed86be303398d6dfc7640a6f1d45d4 ]

The function batadv_softif_vlan_get is responsible for adding new
softif_vlan to the softif_vlan_list. It first checks whether the entry
already is in the list or not. If it is, then the creation of a new entry
is aborted.

But the lock for the list is only held when the list is really modified.
This could lead to duplicated entries because another context could create
an entry with the same key between the check and the list manipulation.

The check and the manipulation of the list must therefore be in the same
locked code section.

Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Prevent duplicated nc_node entry

[ Upstream commit fa122fec8640eb7186ce5a41b83a4c1744ceef8f ]

The function batadv_nc_get_nc_node is responsible for adding new nc_nodes
to the in_coding_list and out_coding_list. It first checks whether the
entry already is in the list or not. If it is, then the creation of a new
entry is aborted.

But the lock for the list is only held when the list is really modified.
This could lead to duplicated entries because another context could create
an entry with the same key between the check and the list manipulation.

The check and the manipulation of the list must therefore be in the same
locked code section.

Fixes: d56b1705e28c ("batman-adv: network coding - detect coding nodes and remove these after timeout")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Fix segfault when writing to sysfs elp_interval

[ Upstream commit a25bab9d723a08bd0bdafb1529faf9094c690b70 ]

The per hardif sysfs file "batman_adv/elp_interval" is using the generic
functions to store/show uint values. The helper __batadv_store_uint_attr
requires the softif net_device as parameter to print the resulting change
as info text when the users writes to this file. It uses the helper
function batadv_info to add it at the same time to the kernel ring buffer
and to the batman-adv debug log (when CONFIG_BATMAN_ADV_DEBUG is enabled).

The function batadv_info requires as first parameter the batman-adv softif
net_device. This parameter is then used to find the private buffer which
contains the debug log for this batman-adv interface. But
batadv_store_throughput_override used as first argument the slave
net_device. This slave device doesn't have the batadv_priv private data
which is access by batadv_info.

Writing to this file with CONFIG_BATMAN_ADV_DEBUG enabled can either lead
to a segfault or to memory corruption.

Fixes: 0744ff8fa8fa ("batman-adv: Add hard_iface specific sysfs wrapper macros for UINT")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Fix segfault when writing to throughput_override

[ Upstream commit b9fd14c20871e6189f635e49b32d7789e430b3c8 ]

The per hardif sysfs file "batman_adv/throughput_override" prints the
resulting change as info text when the users writes to this file. It uses
the helper function batadv_info to add it at the same time to the kernel
ring buffer and to the batman-adv debug log (when CONFIG_BATMAN_ADV_DEBUG
is enabled).

The function batadv_info requires as first parameter the batman-adv softif
net_device. This parameter is then used to find the private buffer which
contains the debug log for this batman-adv interface. But
batadv_store_throughput_override used as first argument the slave
net_device. This slave device doesn't have the batadv_priv private data
which is access by batadv_info.

Writing to this file with CONFIG_BATMAN_ADV_DEBUG enabled can either lead
to a segfault or to memory corruption.

Fixes: 0b5ecc6811bd ("batman-adv: add throughput override attribute to hard_ifaces")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: af9035: prevent buffer overflow on write

[ Upstream commit 312f73b648626a0526a3aceebb0a3192aaba05ce ]

When less than 3 bytes are written to the device, memcpy is called with
negative array size which leads to buffer overflow and kernel panic. This
patch adds a condition and returns -EOPNOTSUPP instead.
Fixes bugzilla issue 64871

[mchehab+samsung@kernel.org: fix a merge conflict and changed the
 condition to match the patch's comment, e. g. len == 3 could
 also be valid]
Signed-off-by: Jozef Balga <jozef.balga@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.134

ipv4: frags: precedence bug in ip_expire()

(commit 70837ffe3085c9a91488b52ca13ac84424da1042 upstream)

We accidentally removed the parentheses here, but they are required
because '!' has higher precedence than '&'.

Fixes: fa0f527358bd ("ip: use rb trees for IP frag queue.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip: frags: fix crash in ip_do_fragment()

commit 5d407b071dc369c26a38398326ee2be53651cfe4 upstream

A kernel crash occurrs when defragmented packet is fragmented
in ip_do_fragment().
In defragment routine, skb_orphan() is called and
skb->ip_defrag_offset is set. but skb->sk and
skb->ip_defrag_offset are same union member. so that
frag->sk is not NULL.
Hence crash occurrs in skb->sk check routine in ip_do_fragment() when
defragmented packet is fragmented.

test commands:
   %iptables -t nat -I POSTROUTING -j MASQUERADE
   %hping3 192.168.4.2 -s 1000 -p 2000 -d 60000

splat looks like:
[  261.069429] kernel BUG at net/ipv4/ip_output.c:636!
[  261.075753] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  261.083854] CPU: 1 PID: 1349 Comm: hping3 Not tainted 4.19.0-rc2+ #3
[  261.100977] RIP: 0010:ip_do_fragment+0x1613/0x2600
[  261.106945] Code: e8 e2 38 e3 fe 4c 8b 44 24 18 48 8b 74 24 08 e9 92 f6 ff ff 80 3c 02 00 0f 85 da 07 00 00 48 8b b5 d0 00 00 00 e9 25 f6 ff ff <0f> 0b 0f 0b 44 8b 54 24 58 4c 8b 4c 24 18 4c 8b 5c 24 60 4c 8b 6c
[  261.127015] RSP: 0018:ffff8801031cf2c0 EFLAGS: 00010202
[  261.134156] RAX: 1ffff1002297537b RBX: ffffed0020639e6e RCX: 0000000000000004
[  261.142156] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880114ba9bd8
[  261.150157] RBP: ffff880114ba8a40 R08: ffffed0022975395 R09: ffffed0022975395
[  261.158157] R10: 0000000000000001 R11: ffffed0022975394 R12: ffff880114ba9ca4
[  261.166159] R13: 0000000000000010 R14: ffff880114ba9bc0 R15: dffffc0000000000
[  261.174169] FS:  00007fbae2199700(0000) GS:ffff88011b400000(0000) knlGS:0000000000000000
[  261.183012] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  261.189013] CR2: 00005579244fe000 CR3: 0000000119bf4000 CR4: 00000000001006e0
[  261.198158] Call Trace:
[  261.199018]  ? dst_output+0x180/0x180
[  261.205011]  ? save_trace+0x300/0x300
[  261.209018]  ? ip_copy_metadata+0xb00/0xb00
[  261.213034]  ? sched_clock_local+0xd4/0x140
[  261.218158]  ? kill_l4proto+0x120/0x120 [nf_conntrack]
[  261.223014]  ? rt_cpu_seq_stop+0x10/0x10
[  261.227014]  ? find_held_lock+0x39/0x1c0
[  261.233008]  ip_finish_output+0x51d/0xb50
[  261.237006]  ? ip_fragment.constprop.56+0x220/0x220
[  261.243011]  ? nf_ct_l4proto_register_one+0x5b0/0x5b0 [nf_conntrack]
[  261.250152]  ? rcu_is_watching+0x77/0x120
[  261.255010]  ? nf_nat_ipv4_out+0x1e/0x2b0 [nf_nat_ipv4]
[  261.261033]  ? nf_hook_slow+0xb1/0x160
[  261.265007]  ip_output+0x1c7/0x710
[  261.269005]  ? ip_mc_output+0x13f0/0x13f0
[  261.273002]  ? __local_bh_enable_ip+0xe9/0x1b0
[  261.278152]  ? ip_fragment.constprop.56+0x220/0x220
[  261.282996]  ? nf_hook_slow+0xb1/0x160
[  261.287007]  raw_sendmsg+0x21f9/0x4420
[  261.291008]  ? dst_output+0x180/0x180
[  261.297003]  ? sched_clock_cpu+0x126/0x170
[  261.301003]  ? find_held_lock+0x39/0x1c0
[  261.306155]  ? stop_critical_timings+0x420/0x420
[  261.311004]  ? check_flags.part.36+0x450/0x450
[  261.315005]  ? _raw_spin_unlock_irq+0x29/0x40
[  261.320995]  ? _raw_spin_unlock_irq+0x29/0x40
[  261.326142]  ? cyc2ns_read_end+0x10/0x10
[  261.330139]  ? raw_bind+0x280/0x280
[  261.334138]  ? sched_clock_cpu+0x126/0x170
[  261.338995]  ? check_flags.part.36+0x450/0x450
[  261.342991]  ? __lock_acquire+0x4500/0x4500
[  261.348994]  ? inet_sendmsg+0x11c/0x500
[  261.352989]  ? dst_output+0x180/0x180
[  261.357012]  inet_sendmsg+0x11c/0x500
[ ... ]

v2:
 - clear skb->sk at reassembly routine.(Eric Dumarzet)

Fixes: fa0f527358bd ("ip: use rb trees for IP frag queue.")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip: process in-order fragments efficiently

This patch changes the runtime behavior of IP defrag queue:
incoming in-order fragments are added to the end of the current
list/"run" of in-order fragments at the tail.

On some workloads, UDP stream performance is substantially improved:

RX: ./udp_stream -F 10 -T 2 -l 60
TX: ./udp_stream -c -H <host> -F 10 -T 5 -l 60

with this patchset applied on a 10Gbps receiver:

  throughput=9524.18
  throughput_units=Mbit/s

upstream (net-next):

  throughput=4608.93
  throughput_units=Mbit/s

Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit a4fd284a1f8fd4b6c59aa59db2185b1e17c5c11c)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip: add helpers to process in-order fragments faster.

This patch introduces several helper functions/macros that will be
used in the follow-up patch. No runtime changes yet.

The new logic (fully implemented in the second patch) is as follows:

* Nodes in the rb-tree will now contain not single fragments, but lists
  of consecutive fragments ("runs").

* At each point in time, the current "active" run at the tail is
  maintained/tracked. Fragments that arrive in-order, adjacent
  to the previous tail fragment, are added to this tail run without
  triggering the re-balancing of the rb-tree.

* If a fragment arrives out of order with the offset _before_ the tail run,
  it is inserted into the rb-tree as a single fragment.

* If a fragment arrives after the current tail fragment (with a gap),
  it starts a new "tail" run, as is inserted into the rb-tree
  at the end as the head of the new run.

skb->cb is used to store additional information
needed here (suggested by Eric Dumazet).

Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 353c9cb360874e737fb000545f783df756c06f9a)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip: use rb trees for IP frag queue.

(commit fa0f527358bd900ef92f925878ed6bfbd51305cc upstream)

Similar to TCP OOO RX queue, it makes sense to use rb trees to store
IP fragments, so that OOO fragments are inserted faster.

Tested:

- a follow-up patch contains a rather comprehensive ip defrag
  self-test (functional)
- ran neper `udp_stream -c -H <host> -F 100 -l 300 -T 20`:
    netstat --statistics
    Ip:
        282078937 total packets received
        0 forwarded
        0 incoming packets discarded
        946760 incoming packets delivered
        18743456 requests sent out
        101 fragments dropped after timeout
        282077129 reassemblies required
        944952 packets reassembled ok
        262734239 packet reassembles failed
   (The numbers/stats above are somewhat better re:
    reassemblies vs a kernel without this patchset. More
    comprehensive performance testing TBD).

Reported-by: Jann Horn <jannh@google.com>
Reported-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: add rb_to_skb() and other rb tree helpers

Geeralize private netem_rb_to_skb()

TCP rtx queue will soon be converted to rb-tree,
so we will need skb_rbtree_walk() helpers.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 18a4c0eab2623cc95be98a1e6af1ad18e7695977)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends

After working on IP defragmentation lately, I found that some large
packets defeat CHECKSUM_COMPLETE optimization because of NIC adding
zero paddings on the last (small) fragment.

While removing the padding with pskb_trim_rcsum(), we set skb->ip_summed
to CHECKSUM_NONE, forcing a full csum validation, even if all prior
fragments had CHECKSUM_COMPLETE set.

We can instead compute the checksum of the part we are trimming,
usually smaller than the part we keep.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 88078d98d1bb085d72af8437707279e203524fa5)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: defrag: drop non-last frags smaller than min mtu

don't bother with pathological cases, they only waste cycles.
IPv6 requires a minimum MTU of 1280 so we should never see fragments
smaller than this (except last frag).

v3: don't use awkward "-offset + len"
v2: drop IPv4 part, which added same check w. IPV4_MIN_MTU (68).
    There were concerns that there could be even smaller frags
    generated by intermediate nodes, e.g. on radio networks.

Cc: Peter Oskolkov <posk@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 0ed4229b08c13c84a3c301a08defdc9e7f4467e6)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: modify skb_rbtree_purge to return the truesize of all purged skbs.

Tested: see the next patch is the series.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 385114dec8a49b5e5945e77ba7de6356106713f4)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: speed up skb_rbtree_purge()

As measured in my prior patch ("sch_netem: faster rb tree removal"),
rbtree_postorder_for_each_entry_safe() is nice looking but much slower
than using rb_next() directly, except when tree is small enough
to fit in CPU caches (then the cost is the same)

Also note that there is not even an increase of text size :
$ size net/core/skbuff.o.before net/core/skbuff.o
   text    data     bss     dec     hex filename
  40711    1298       0   42009    a419 net/core/skbuff.o.before
  40711    1298       0   42009    a419 net/core/skbuff.o

From: Eric Dumazet <edumazet@google.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 7c90584c66cc4b033a3b684b0e0950f79e7b7166)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip: discard IPv4 datagrams with overlapping segments.

This behavior is required in IPv6, and there is little need
to tolerate overlapping fragments in IPv4. This change
simplifies the code and eliminates potential DDoS attack vectors.

Tested: ran ip_defrag selftest (not yet available uptream).

Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 7969e5c40dfd04799d4341f1b7cd266b6e47f227)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: fix ip6frag_low_thresh boundary

Giving an integer to proc_doulongvec_minmax() is dangerous on 64bit arches,
since linker might place next to it a non zero value preventing a change
to ip6frag_low_thresh.

ip6frag_low_thresh is not used anymore in the kernel, but we do not
want to prematuraly break user scripts wanting to change it.

Since specifying a minimal value of 0 for proc_doulongvec_minmax()
is moot, let's remove these zero values in all defrag units.

Fixes: 6e00f7dd5e4e ("ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 3d23401283e80ceb03f765842787e0e79ff598b7)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: get rid of ipfrag_skb_cb/FRAG_CB

ip_defrag uses skb->cb[] to store the fragment offset, and unfortunately
this integer is currently in a different cache line than skb->next,
meaning that we use two cache lines per skb when finding the insertion point.

By aliasing skb->ip_defrag_offset and skb->dev, we pack all the fields
in a single cache line and save precious memory bandwidth.

Note that after the fast path added by Changli Gao in commit
d6bebca92c66 ("fragment: add fast path for in-order fragments")
this change wont help the fast path, since we still need
to access prev->len (2nd cache line), but will show great
benefits when slow path is entered, since we perform
a linear scan of a potentially long list.

Also, note that this potential long list is an attack vector,
we might consider also using an rb-tree there eventually.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit bf66337140c64c27fa37222b7abca7e49d63fb57)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: reorganize struct netns_frags

Put the read-mostly fields in a separate cache line
at the beginning of struct netns_frags, to reduce
false sharing noticed in inet_frag_kill()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit c2615cf5a761b32bf74e85bddc223dfff3d9b9f0)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rhashtable: reorganize struct rhashtable layout

While under frags DDOS I noticed unfortunate false sharing between
@nelems and @params.automatic_shrinking

Move @nelems at the end of struct rhashtable so that first cache line
is shared between all cpus, because almost never dirtied.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit e5d672a0780d9e7118caad4c171ec88b8299398d)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: frags: rewrite ip6_expire_frag_queue()

Make it similar to IPv4 ip_expire(), and release the lock
before calling icmp functions.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 05c0b86b9696802fd0ce5676a92a63f1b455bdf3)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: do not clone skb in ip_expire()

An skb_clone() was added in commit ec4fbd64751d ("inet: frag: release
spinlock before calling icmp_send()")

While fixing the bug at that time, it also added a very high cost
for DDOS frags, as the ICMP rate limit is applied after this
expensive operation (skb_clone() + consume_skb(), implying memory
allocations, copy, and freeing)

We can use skb_get(head) here, all we want is to make sure skb wont
be freed by another cpu.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 1eec5d5670084ee644597bd26c25e22c69b9f748)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: break the 2GB limit for frags storage

Some users are willing to provision huge amounts of memory to be able
to perform reassembly reasonnably well under pressure.

Current memory tracking is using one atomic_t and integers.

Switch to atomic_long_t so that 64bit arches can use more than 2GB,
without any cost for 32bit arches.

Note that this patch avoids an overflow error, if high_thresh was set
to ~2GB, since this test in inet_frag_alloc() was never true :

if (... || frag_mem_limit(nf) > nf->high_thresh)

Tested:

$ echo 16000000000 >/proc/sys/net/ipv4/ipfrag_high_thresh

<frag DDOS>

$ grep FRAG /proc/net/sockstat
FRAG: inuse 14705885 memory 16000002880

$ nstat -n ; sleep 1 ; nstat | grep Reas
IpReasmReqds                    3317150            0.0
IpReasmFails                    3317112            0.0

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 3e67f106f619dcfaf6f4e2039599bdb69848c714)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: remove inet_frag_maybe_warn_overflow()

This function is obsolete, after rhashtable addition to inet defrag.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 2d44ed22e607f9a285b049de2263e3840673a260)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: get rif of inet_frag_evicting()

This refactors ip_expire() since one indentation level is removed.

Note: in the future, we should try hard to avoid the skb_clone()
since this is a serious performance cost.
Under DDOS, the ICMP message wont be sent because of rate limits.

Fact that ip6_expire_frag_queue() does not use skb_clone() is
disturbing too. Presumably IPv6 should have the same
issue than the one we fixed in commit ec4fbd64751d
("inet: frag: release spinlock before calling icmp_send()")

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 399d1404be660d355192ff4df5ccc3f4159ec1e4)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: remove some helpers

Remove sum_frag_mem_limit(), ip_frag_mem() & ip6_frag_mem()

Also since we use rhashtable we can bring back the number of fragments
in "grep FRAG /proc/net/sockstat /proc/net/sockstat6" that was
removed in commit 434d305405ab ("inet: frag: don't account number
of fragment queues")

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 6befe4a78b1553edb6eed3a78b4bcd9748526672)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: use rhashtables for reassembly units

Some applications still rely on IP fragmentation, and to be fair linux
reassembly unit is not working under any serious load.

It uses static hash tables of 1024 buckets, and up to 128 items per bucket (!!!)

A work queue is supposed to garbage collect items when host is under memory
pressure, and doing a hash rebuild, changing seed used in hash computations.

This work queue blocks softirqs for up to 25 ms when doing a hash rebuild,
occurring every 5 seconds if host is under fire.

Then there is the problem of sharing this hash table for all netns.

It is time to switch to rhashtables, and allocate one of them per netns
to speedup netns dismantle, since this is a critical metric these days.

Lookup is now using RCU. A followup patch will even remove
the refcount hold/release left from prior implementation and save
a couple of atomic operations.

Before this patch, 16 cpus (16 RX queue NIC) could not handle more
than 1 Mpps frags DDOS.

After the patch, I reach 9 Mpps without any tuning, and can use up to 2GB
of storage for the fragments (exact number depends on frags being evicted
after timeout)

$ grep FRAG /proc/net/sockstat
FRAG: inuse 1966916 memory 2140004608

A followup patch will change the limits for 64bit arches.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Florian Westphal <fw@strlen.de>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 648700f76b03b7e8149d13cc2bdb3355035258a9)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rhashtable: add schedule points

Rehashing and destroying large hash table takes a lot of time,
and happens in process context. It is safe to add cond_resched()
in rhashtable_rehash_table() and rhashtable_free_and_destroy()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit ae6da1f503abb5a5081f9f6c4a6881de97830f3e)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: export ip6 fragments sysctl to unprivileged users

IPv4 was changed in commit 52a773d645e9 ("net: Export ip fragment
sysctl to unprivileged users")

The only sysctl that is not per-netns is not used :
ip6frag_secret_interval

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 18dcbe12fe9fca0ab825f7eff993060525ac2503)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: refactor lowpan_net_frag_init()

We want to call lowpan_net_frag_init() earlier.
Similar to commit "inet: frags: refactor ipv6_frag_init()"

This is a prereq to "inet: frags: use rhashtables for reassembly units"

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 807f1844df4ac23594268fa9f41902d0549e92aa)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: refactor ipv6_frag_init()

We want to call inet_frags_init() earlier.

This is a prereq to "inet: frags: use rhashtables for reassembly units"

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 5b975bab23615cd0fdf67af6c9298eb01c4b9f61)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: refactor ipfrag_init()

We need to call inet_frags_init() before register_pernet_subsys(),
as a prereq for following patch ("inet: frags: use rhashtables for reassembly units")

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 483a6e4fa055123142d8956866fe2aa9c98d546d)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: add a pointer to struct netns_frags

In order to simplify the API, add a pointer to struct inet_frags.
This will allow us to make things less complex.

These functions no longer have a struct inet_frags parameter :

inet_frag_destroy(struct inet_frag_queue *q  /*, struct inet_frags *f */)
inet_frag_put(struct inet_frag_queue *q /*, struct inet_frags *f */)
inet_frag_kill(struct inet_frag_queue *q /*, struct inet_frags *f */)
inet_frags_exit_net(struct netns_frags *nf /*, struct inet_frags *f */)
ip6_expire_frag_queue(struct net *net, struct frag_queue *fq)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 093ba72914b696521e4885756a68a3332782c8de)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: change inet_frags_init_net() return value

We will soon initialize one rhashtable per struct netns_frags
in inet_frags_init_net().

This patch changes the return value to eventually propagate an
error.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 787bea7748a76130566f881c2342a0be4127d182)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: make sure to grab rcu_read_lock before using ireq->ireq_opt

[ Upstream commit 2ab2ddd301a22ca3c5f0b743593e4ad2953dfa53 ]

Timer handlers do not imply rcu_read_lock(), so my recent fix
triggered a LOCKDEP warning when SYNACK is retransmit.

Lets add rcu_read_lock()/rcu_read_unlock() pairs around ireq->ireq_opt
usages instead of guessing what is done by callers, since it is
not worth the pain.

Get rid of ireq_opt_deref() helper since it hides the logic
without real benefit, since it is now a standard rcu_dereference().

Fixes: 1ad98e9d1bdf ("tcp/dccp: fix lockdep issue when SYN is backlogged")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp/dccp: fix lockdep issue when SYN is backlogged

[ Upstream commit 1ad98e9d1bdf4724c0a8532fabd84bf3c457c2bc ]

In normal SYN processing, packets are handled without listener
lock and in RCU protected ingress path.

But syzkaller is known to be able to trick us and SYN
packets might be processed in process context, after being
queued into socket backlog.

In commit 06f877d613be ("tcp/dccp: fix other lockdep splats
accessing ireq_opt") I made a very stupid fix, that happened
to work mostly because of the regular path being RCU protected.

Really the thing protecting ireq->ireq_opt is RCU read lock,
and the pseudo request refcnt is not relevant.

This patch extends what I did in commit 449809a66c1d ("tcp/dccp:
block BH for SYN processing") by adding an extra rcu_read_{lock|unlock}
pair in the paths that might be taken when processing SYN from
socket backlog (thus possibly in process context)

Fixes: 06f877d613be ("tcp/dccp: fix other lockdep splats accessing ireq_opt")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtnl: limit IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES to 4096

[ Upstream commit 0e1d6eca5113858ed2caea61a5adc03c595f6096 ]

We have an impressive number of syzkaller bugs that are linked
to the fact that syzbot was able to create a networking device
with millions of TX (or RX) queues.

Let's limit the number of RX/TX queues to 4096, this really should
cover all known cases.

A separate patch will add various cond_resched() in the loops
handling sysfs entries at device creation and dismantle.

Tested:

lpaa6:~# ip link add gre-4097 numtxqueues 4097 numrxqueues 4097 type ip6gretap
RTNETLINK answers: Invalid argument

lpaa6:~# time ip link add gre-4096 numtxqueues 4096 numrxqueues 4096 type ip6gretap

real 0m0.180s
user 0m0.000s
sys 0m0.107s

Fixes: 76ff5cc91935 ("rtnl: allow to specify number of rx and tx queues on device creation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: systemport: Fix wake-up interrupt race during resume

[ Upstream commit 45ec318578c0c22a11f5b9927d064418e1ab1905 ]

The AON_PM_L2 is normally used to trigger and identify the source of a
wake-up event. Since the RX_SYS clock is no longer turned off, we also
have an interrupt being sent to the SYSTEMPORT INTRL_2_0 controller, and
that interrupt remains active up until the magic packet detector is
disabled which happens much later during the driver resumption.

The race happens if we have a CPU that is entering the SYSTEMPORT
INTRL2_0 handler during resume, and another CPU has managed to clear the
wake-up interrupt during bcm_sysport_resume_from_wol(). In that case, we
have the first CPU stuck in the interrupt handler with an interrupt
cause that has been cleared under its feet, and so we keep returning
IRQ_NONE and we never make any progress.

This was not a problem before because we would always turn off the
RX_SYS clock during WoL, so the SYSTEMPORT INTRL2_0 would also be turned
off as well, thus not latching the interrupt.

The fix is to make sure we do not enable either the MPD or
BRCM_TAG_MATCH interrupts since those are redundant with what the
AON_PM_L2 interrupt controller already processes and they would cause
such a race to occur.

Fixes: bb9051a2b230 ("net: systemport: Add support for WAKE_FILTER")
Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvpp2: Extract the correct ethtype from the skb for tx csum offload

[ Upstream commit 35f3625c21852ad839f20c91c7d81c4c1101e207 ]

When offloading the L3 and L4 csum computation on TX, we need to extract
the l3_proto from the ethtype, independently of the presence of a vlan
tag.

The actual driver uses skb->protocol as-is, resulting in packets with
the wrong L4 checksum being sent when there's a vlan tag in the packet
header and checksum offloading is enabled.

This commit makes use of vlan_protocol_get() to get the correct ethtype
regardless the presence of a vlan tag.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: bcm_sf2: Fix unbind ordering

[ Upstream commit bf3b452b7af787b8bf27de6490dc4eedf6f97599 ]

The order in which we release resources is unfortunately leading to bus
errors while dismantling the port. This is because we set
priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now
permissible to clock gate the switch. Later on, when dsa_slave_destroy()
comes in from dsa_unregister_switch() and calls
dsa_switch_ops::port_disable, we perform the same dismantling again, and
this time we hit registers that are clock gated.

Make sure that dsa_unregister_switch() is the first thing that happens,
which takes care of releasing all user visible resources, then proceed
with clock gating hardware. We still need to set priv->wol_ports_mask to
0 to make sure that an enabled port properly gets disabled in case it
was previously used as part of Wake-on-LAN.

Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>