arm64: mm: Always make sw-dirty PTEs hw-dirty in pte_modify

commit 3c0696076aad60a2f04c019761921954579e1b0e upstream.

It is currently possible for a userspace application to enter an
infinite page fault loop when using HugeTLB pages implemented with
contiguous PTEs when HAFDBS is not available. This happens because:

1. The kernel may sometimes write PTEs that are sw-dirty but hw-clean
   (PTE_DIRTY | PTE_RDONLY | PTE_WRITE).

2. If, during a write, the CPU uses a sw-dirty, hw-clean PTE in handling
   the memory access on a system without HAFDBS, we will get a page
   fault.

3. HugeTLB will check if it needs to update the dirty bits on the PTE.
   For contiguous PTEs, it will check to see if the pgprot bits need
   updating. In this case, HugeTLB wants to write a sequence of
   sw-dirty, hw-dirty PTEs, but it finds that all the PTEs it is about
   to overwrite are all pte_dirty() (pte_sw_dirty() => pte_dirty()),
   so it thinks no update is necessary.

We can get the kernel to write a sw-dirty, hw-clean PTE with the
following steps (showing the relevant VMA flags and pgprot bits):

i.   Create a valid, writable contiguous PTE.
       VMA vmflags:     VM_SHARED | VM_READ | VM_WRITE
       VMA pgprot bits: PTE_RDONLY | PTE_WRITE
       PTE pgprot bits: PTE_DIRTY | PTE_WRITE

ii.  mprotect the VMA to PROT_NONE.
       VMA vmflags:     VM_SHARED
       VMA pgprot bits: PTE_RDONLY
       PTE pgprot bits: PTE_DIRTY | PTE_RDONLY

iii. mprotect the VMA back to PROT_READ | PROT_WRITE.
       VMA vmflags:     VM_SHARED | VM_READ | VM_WRITE
       VMA pgprot bits: PTE_RDONLY | PTE_WRITE
       PTE pgprot bits: PTE_DIRTY | PTE_WRITE | PTE_RDONLY

Make it impossible to create a writeable sw-dirty, hw-clean PTE with
pte_modify(). Such a PTE should be impossible to create, and there may
be places that assume that pte_dirty() implies pte_hw_dirty().

Signed-off-by: James Houghton <jthoughton@google.com>
Fixes: 031e6e6b4e12 ("arm64: hugetlb: Avoid unnecessary clearing in huge_ptep_set_access_flags")
Cc: <stable@vger.kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20231204172646.2541916-3-jthoughton@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "selftests: error out if kernel header files are not yet built"

commit 43e8832fed08438e2a27afed9bac21acd0ceffe5 upstream.

This reverts commit 9fc96c7c19df ("selftests: error out if kernel header
files are not yet built").

It turns out that requiring the kernel headers to be built as a
prerequisite to building selftests, does not work in many cases. For
example, Peter Zijlstra writes:

"My biggest beef with the whole thing is that I simply do not want to use
'make headers', it doesn't work for me.

I have a ton of output directories and I don't care to build tools into
the output dirs, in fact some of them flat out refuse to work that way
(bpf comes to mind)." [1]

Therefore, stop erroring out on the selftests build. Additional patches
will be required in order to change over to not requiring the kernel
headers.

[1] https://lore.kernel.org/20231208221007.GO28727@noisy.programming.kicks-ass.net

Link: https://lkml.kernel.org/r/20231209020144.244759-1-jhubbard@nvidia.com
Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS

commit 2dcf5fde6dffb312a4bfb8ef940cea2d1f402e32 upstream.

For files with logical blocks close to EXT_MAX_BLOCKS, the file size
predicted in ext4_mb_normalize_request() may exceed EXT_MAX_BLOCKS.
This can cause some blocks to be preallocated that will not be used.
And after [Fixes], the following issue may be triggered:

=========================================================
 kernel BUG at fs/ext4/mballoc.c:4653!
 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
 CPU: 1 PID: 2357 Comm: xfs_io 6.7.0-rc2-00195-g0f5cc96c367f
 Hardware name: linux,dummy-virt (DT)
 pc : ext4_mb_use_inode_pa+0x148/0x208
 lr : ext4_mb_use_inode_pa+0x98/0x208
 Call trace:
  ext4_mb_use_inode_pa+0x148/0x208
  ext4_mb_new_inode_pa+0x240/0x4a8
  ext4_mb_use_best_found+0x1d4/0x208
  ext4_mb_try_best_found+0xc8/0x110
  ext4_mb_regular_allocator+0x11c/0xf48
  ext4_mb_new_blocks+0x790/0xaa8
  ext4_ext_map_blocks+0x7cc/0xd20
  ext4_map_blocks+0x170/0x600
  ext4_iomap_begin+0x1c0/0x348
=========================================================

Here is a calculation when adjusting ac_b_ex in ext4_mb_new_inode_pa():

ex.fe_logical = orig_goal_end - EXT4_C2B(sbi, ex.fe_len);
if (ac->ac_o_ex.fe_logical >= ex.fe_logical)
goto adjust_bex;

The problem is that when orig_goal_end is subtracted from ac_b_ex.fe_len
it is still greater than EXT_MAX_BLOCKS, which causes ex.fe_logical to
overflow to a very small value, which ultimately triggers a BUG_ON in
ext4_mb_new_inode_pa() because pa->pa_free < len.

The last logical block of an actual write request does not exceed
EXT_MAX_BLOCKS, so in ext4_mb_normalize_request() also avoids normalizing
the last logical block to exceed EXT_MAX_BLOCKS to avoid the above issue.

The test case in [Link] can reproduce the above issue with 64k block size.

Link: https://patchwork.kernel.org/project/fstests/list/?series=804003
Cc: <stable@kernel.org> # 6.4
Fixes: 93cdf49f6eca ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231127063313.3734294-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soundwire: stream: fix NULL pointer dereference for multi_link

commit e199bf52ffda8f98f129728d57244a9cd9ad5623 upstream.

If bus is marked as multi_link, but number of masters in the stream is
not higher than bus->hw_sync_min_links (bus->multi_link && m_rt_count >=
bus->hw_sync_min_links), bank switching should not happen.  The first
part of do_bank_switch() code properly takes these conditions into
account, but second part (sdw_ml_sync_bank_switch()) relies purely on
bus->multi_link property.  This is not balanced and leads to NULL
pointer dereference:

  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  ...
  Call trace:
   wait_for_completion_timeout+0x124/0x1f0
   do_bank_switch+0x370/0x6f8
   sdw_prepare_stream+0x2d0/0x438
   qcom_snd_sdw_prepare+0xa0/0x118
   sm8450_snd_prepare+0x128/0x148
   snd_soc_link_prepare+0x5c/0xe8
   __soc_pcm_prepare+0x28/0x1ec
   dpcm_be_dai_prepare+0x1e0/0x2c0
   dpcm_fe_dai_prepare+0x108/0x28c
   snd_pcm_do_prepare+0x44/0x68
   snd_pcm_action_single+0x54/0xc0
   snd_pcm_action_nonatomic+0xe4/0xec
   snd_pcm_prepare+0xc4/0x114
   snd_pcm_common_ioctl+0x1154/0x1cc0
   snd_pcm_ioctl+0x54/0x74

Fixes: ce6e74d008ff ("soundwire: Add support for multi link bank switch")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124180136.390621-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl/hdm: Fix dpa translation locking

commit 6f5c4eca48ffe18307b4e1d375817691c9005c87 upstream.

The helper, cxl_dpa_resource_start(), snapshots the dpa-address of an
endpoint-decoder after acquiring the cxl_dpa_rwsem. However, it is
sufficient to assert that cxl_dpa_rwsem is held rather than acquire it
in the helper. Otherwise, it triggers multiple lockdep reports:

1/ Tracing callbacks are in an atomic context that can not acquire sleeping
locks:

    BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1525
    in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1288, name: bash
    preempt_count: 2, expected: 0
    RCU nest depth: 0, expected: 0
    [..]
    Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc38 05/24/2023
    Call Trace:
     <TASK>
     dump_stack_lvl+0x71/0x90
     __might_resched+0x1b2/0x2c0
     down_read+0x1a/0x190
     cxl_dpa_resource_start+0x15/0x50 [cxl_core]
     cxl_trace_hpa+0x122/0x300 [cxl_core]
     trace_event_raw_event_cxl_poison+0x1c9/0x2d0 [cxl_core]

2/ The rwsem is already held in the inject poison path:

    WARNING: possible recursive locking detected
    6.7.0-rc2+ #12 Tainted: G        W  OE    N
    --------------------------------------------
    bash/1288 is trying to acquire lock:
    ffffffffc05f73d0 (cxl_dpa_rwsem){++++}-{3:3}, at: cxl_dpa_resource_start+0x15/0x50 [cxl_core]

    but task is already holding lock:
    ffffffffc05f73d0 (cxl_dpa_rwsem){++++}-{3:3}, at: cxl_inject_poison+0x7d/0x1e0 [cxl_core]
    [..]
    Call Trace:
     <TASK>
     dump_stack_lvl+0x71/0x90
     __might_resched+0x1b2/0x2c0
     down_read+0x1a/0x190
     cxl_dpa_resource_start+0x15/0x50 [cxl_core]
     cxl_trace_hpa+0x122/0x300 [cxl_core]
     trace_event_raw_event_cxl_poison+0x1c9/0x2d0 [cxl_core]
     __traceiter_cxl_poison+0x5c/0x80 [cxl_core]
     cxl_inject_poison+0x1bc/0x1e0 [cxl_core]

This appears to have been an issue since the initial implementation and
uncovered by the new cxl-poison.sh test [1]. That test is now passing with
these changes.

Fixes: 28a3ae4ff66c ("cxl/trace: Add an HPA to cxl_poison trace events")
Link: http://lore.kernel.org/r/e4f2716646918135ddbadf4146e92abb659de734.1700615159.git.alison.schofield@intel.com
Cc: <stable@vger.kernel.org>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: do not allow non subvolume root targets for snapshot

commit a8892fd71933126ebae3d60aec5918d4dceaae76 upstream.

Our btrfs subvolume snapshot <source> <destination> utility enforces
that <source> is the root of the subvolume, however this isn't enforced
in the kernel.  Update the kernel to also enforce this limitation to
avoid problems with other users of this ioctl that don't have the
appropriate checks in place.

Reported-by: Martin Michaelis <code@mgjm.de>
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Fix perf_event_validate_size() lockdep splat

commit 7e2c1e4b34f07d9aa8937fab88359d4a0fce468e upstream.

When lockdep is enabled, the for_each_sibling_event(sibling, event)
macro checks that event->ctx->mutex is held. When creating a new group
leader event, we call perf_event_validate_size() on a partially
initialized event where event->ctx is NULL, and so when
for_each_sibling_event() attempts to check event->ctx->mutex, we get a
splat, as reported by Lucas De Marchi:

  WARNING: CPU: 8 PID: 1471 at kernel/events/core.c:1950 __do_sys_perf_event_open+0xf37/0x1080

This only happens for a new event which is its own group_leader, and in
this case there cannot be any sibling events. Thus it's safe to skip the
check for siblings, which avoids having to make invasive and ugly
changes to for_each_sibling_event().

Avoid the splat by bailing out early when the new event is its own
group_leader.

Fixes: 382c27f4ed28f803 ("perf: Fix perf_event_validate_size()")
Closes: https://lore.kernel.org/lkml/20231214000620.3081018-1-lucas.demarchi@intel.com/
Closes: https://lore.kernel.org/lkml/ZXpm6gQ%2Fd59jGsuW@xpf.sh.intel.com/
Reported-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231215112450.3972309-1-mark.rutland@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hid-asus: add const to read-only outgoing usb buffer

[ Upstream commit 06ae5afce8cc1f7621cc5c7751e449ce20d68af7 ]

In the function asus_kbd_set_report the parameter buf is read-only
as it gets copied in a memory portion suitable for USB transfer,
but the parameter is not marked as const: add the missing const and mark
const immutable buffers passed to that function.

Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: add dependency between vmlinuz.efi and Image

[ Upstream commit c0a8574204054effad6ac83cc75c02576e2985fe ]

A common issue in Makefile is a race in parallel building.

You need to be careful to prevent multiple threads from writing to the
same file simultaneously.

Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not
generate invalid images") addressed such a bad scenario.

A similar symptom occurs with the following command:

  $ make -j$(nproc) ARCH=arm64 Image vmlinuz.efi
    [ snip ]
    SORTTAB vmlinux
    OBJCOPY arch/arm64/boot/Image
    OBJCOPY arch/arm64/boot/Image
    AS      arch/arm64/boot/zboot-header.o
    PAD     arch/arm64/boot/vmlinux.bin
    GZIP    arch/arm64/boot/vmlinuz
    OBJCOPY arch/arm64/boot/vmlinuz.o
    LD      arch/arm64/boot/vmlinuz.efi.elf
    OBJCOPY arch/arm64/boot/vmlinuz.efi

The log "OBJCOPY arch/arm64/boot/Image" is displayed twice.

It indicates that two threads simultaneously enter arch/arm64/boot/
and write to arch/arm64/boot/Image.

It occasionally leads to a build failure:

  $ make -j$(nproc) ARCH=arm64 Image vmlinuz.efi
    [ snip ]
    SORTTAB vmlinux
    OBJCOPY arch/arm64/boot/Image
    PAD     arch/arm64/boot/vmlinux.bin
  truncate: Invalid number: 'arch/arm64/boot/vmlinux.bin'
  make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13:
  arch/arm64/boot/vmlinux.bin] Error 1
  make[2]: *** Deleting file 'arch/arm64/boot/vmlinux.bin'
  make[1]: *** [arch/arm64/Makefile:163: vmlinuz.efi] Error 2
  make[1]: *** Waiting for unfinished jobs....
  make: *** [Makefile:234: __sub-make] Error 2

vmlinuz.efi depends on Image, but such a dependency is not specified
in arch/arm64/Makefile.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: SImon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20231119053234.2367621-1-masahiroy@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smb: client: set correct file type from NFS reparse points

[ Upstream commit 45e724022e2704b5a5193fd96f378822b0448e07 ]

Handle all file types in NFS reparse points as specified in MS-FSCC
2.1.2.6 Network File System (NFS) Reparse Data Buffer.

The client is now able to set all file types based on the parsed NFS
reparse point, which used to support only symlinks.  This works for
SMB1+.

Before patch:

$ mount.cifs //srv/share /mnt -o ...
$ ls -l /mnt
ls: cannot access 'block': Operation not supported
ls: cannot access 'char': Operation not supported
ls: cannot access 'fifo': Operation not supported
ls: cannot access 'sock': Operation not supported
total 1
l????????? ? ?    ?    ?            ? block
l????????? ? ?    ?    ?            ? char
-rwxr-xr-x 1 root root 5 Nov 18 23:22 f0
l????????? ? ?    ?    ?            ? fifo
l--------- 1 root root 0 Nov 18 23:23 link -> f0
l????????? ? ?    ?    ?            ? sock

After patch:

$ mount.cifs //srv/share /mnt -o ...
$ ls -l /mnt
total 1
brwxr-xr-x 1 root root  123,  123 Nov 18 00:34 block
crwxr-xr-x 1 root root 1234, 1234 Nov 18 00:33 char
-rwxr-xr-x 1 root root          5 Nov 18 23:22 f0
prwxr-xr-x 1 root root          0 Nov 18 23:23 fifo
lrwxr-xr-x 1 root root          0 Nov 18 23:23 link -> f0
srwxr-xr-x 1 root root          0 Nov 19  2023 sock

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smb: client: introduce ->parse_reparse_point()

[ Upstream commit 539aad7f14dab7f947e5ab81901c0b20513a50db ]

Parse reparse point into cifs_open_info_data structure and feed it
through cifs_open_info_to_fattr().

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smb: client: implement ->query_reparse_point() for SMB1

[ Upstream commit ed3e0a149b58ea8cfd10cc4f7cefb39877ff07ac ]

Reparse points are not limited to symlinks, so implement
->query_reparse_point() in order to handle different file types.

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: usb: qmi_wwan: claim interface 4 for ZTE MF290

[ Upstream commit 99360d9620f09fb8bc15548d855011bbb198c680 ]

Interface 4 is used by for QMI interface in stock firmware of MF28D, the
router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up
from option driver.
The proper configuration is:

Interface mapping is:
0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0189 Rev= 0.00
S:  Manufacturer=ZTE, Incorporated
S:  Product=ZTE LTE Technologies MSM
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Link: https://lore.kernel.org/r/20231117231918.100278-3-lech.perczak@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

eventfs: Do not allow NULL parent to eventfs_start_creating()

[ Upstream commit fc4561226feaad5fcdcb55646c348d77b8ee69c5 ]

The eventfs directory is dynamically created via the meta data supplied by
the existing trace events. All files and directories in eventfs has a
parent. Do not allow NULL to be passed into eventfs_start_creating() as
the parent because that should never happen. Warn if it does.

Link: https://lkml.kernel.org/r/20231121231112.693841807@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

asm-generic: qspinlock: fix queued_spin_value_unlocked() implementation

[ Upstream commit 125b0bb95dd6bec81b806b997a4ccb026eeecf8f ]

We really don't want to do atomic_read() or anything like that, since we
already have the value, not the lock.  The whole point of this is that
we've loaded the lock from memory, and we want to check whether the
value we loaded was a locked one or not.

The main use of this is the lockref code, which loads both the lock and
the reference count in one atomic operation, and then works on that
combined value.  With the atomic_read(), the compiler would pointlessly
spill the value to the stack, in order to then be able to read it back
"atomically".

This is the qspinlock version of commit c6f4a9002252 ("asm-generic:
ticket-lock: Optimize arch_spin_value_unlocked()") which fixed this same
bug for ticket locks.

Cc: Guo Ren <guoren@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/all/CAHk-=whNRv0v6kQiV5QO6DJhjH4KEL36vWQ6Re8Csrnh4zbRkQ@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts/checkstack.pl: match all stack sizes for s390

[ Upstream commit aab1f809d7540def24498e81347740a7239a74d5 ]

For some unknown reason the regular expression for checkstack only matches
three digit numbers starting with the number "3", or any higher
number. Which means that it skips any stack sizes smaller than 304
bytes. This makes the checkstack script a bit less useful than it could be.

Change the script to match any number. To be filtered out stack sizes
can be configured with the min_stack variable, which omits any stack
frame sizes smaller than 100 bytes by default.

Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfc: virtual_ncidev: Add variable to check if ndev is running

[ Upstream commit 84d2db91f14a32dc856a5972e3f0907089093c7a ]

syzbot reported an memory leak that happens when an skb is add to
send_buff after virtual nci closed.
This patch adds a variable to track if the ndev is running before
handling new skb in send function.

Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Reported-by: syzbot+6eb09d75211863f15e3e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/00000000000075472b06007df4fb@google.com
Reviewed-by: Bongsu Jeon
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad

[ Upstream commit 9ffccb691adb854e7b7f3ee57fbbda12ff70533f ]

Honor MagicBook 13 2023 has a touchpad which do not switch to the multitouch
mode until the input mode feature is written by the host.  The touchpad do
report the input mode at touchpad(3), while itself working under mouse mode. As
a workaround, it is possible to call MT_QUIRE_FORCE_GET_FEATURE to force set
feature in mt_set_input_mode for such device.

The touchpad reports as BLTP7853, which cannot retrive any useful manufacture
information on the internel by this string at present.  As the serial number of
the laptop is GLO-G52, while DMI info reports the laptop serial number as
GLO-GXXX, this workaround should applied to all models which has the GLO-GXXX.

Signed-off-by: Aoba K <nexp_0x17@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: hid-asus: reset the backlight brightness level on resume

[ Upstream commit 546edbd26cff7ae990e480a59150e801a06f77b1 ]

Some devices managed by this driver automatically set brightness to 0
before entering a suspended state and reset it back to a default
brightness level after the resume:
this has the effect of having the kernel report wrong brightness
status after a sleep, and on some devices (like the Asus RC71L) that
brightness is the intensity of LEDs directly facing the user.

Fix the above issue by setting back brightness to the level it had
before entering a sleep state.

Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: pass nbd_sock to nbd_read_reply() instead of index

[ Upstream commit 98c598afc22d4e43c2ad91860b65996d0c099a5d ]

If a socket is processing ioctl 'NBD_SET_SOCK', config->socks might be
krealloc in nbd_add_socket(), and a garbage request is received now, a UAF
may occurs.

  T1
  nbd_ioctl
   __nbd_ioctl
    nbd_add_socket
     blk_mq_freeze_queue
T2
   recv_work
    nbd_read_reply
     sock_xmit
     krealloc config->socks
   def config->socks

Pass nbd_sock to nbd_read_reply(). And introduce a new function
sock_xmit_recv(), which differs from sock_xmit only in the way it get
socket.

==================================================================
BUG: KASAN: use-after-free in sock_xmit+0x525/0x550
Read of size 8 at addr ffff8880188ec428 by task kworker/u12:1/18779

Workqueue: knbd4-recv recv_work
Call Trace:
 __dump_stack
 dump_stack+0xbe/0xfd
 print_address_description.constprop.0+0x19/0x170
 __kasan_report.cold+0x6c/0x84
 kasan_report+0x3a/0x50
 sock_xmit+0x525/0x550
 nbd_read_reply+0xfe/0x2c0
 recv_work+0x1c2/0x750
 process_one_work+0x6b6/0xf10
 worker_thread+0xdd/0xd80
 kthread+0x30a/0x410
 ret_from_fork+0x22/0x30

Allocated by task 18784:
 kasan_save_stack+0x1b/0x40
 kasan_set_track
 set_alloc_info
 __kasan_kmalloc
 __kasan_kmalloc.constprop.0+0xf0/0x130
 slab_post_alloc_hook
 slab_alloc_node
 slab_alloc
 __kmalloc_track_caller+0x157/0x550
 __do_krealloc
 krealloc+0x37/0xb0
 nbd_add_socket
 +0x2d3/0x880
 __nbd_ioctl
 nbd_ioctl+0x584/0x8e0
 __blkdev_driver_ioctl
 blkdev_ioctl+0x2a0/0x6e0
 block_ioctl+0xee/0x130
 vfs_ioctl
 __do_sys_ioctl
 __se_sys_ioctl+0x138/0x190
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x61/0xc6

Freed by task 18784:
 kasan_save_stack+0x1b/0x40
 kasan_set_track+0x1c/0x30
 kasan_set_free_info+0x20/0x40
 __kasan_slab_free.part.0+0x13f/0x1b0
 slab_free_hook
 slab_free_freelist_hook
 slab_free
 kfree+0xcb/0x6c0
 krealloc+0x56/0xb0
 nbd_add_socket+0x2d3/0x880
 __nbd_ioctl
 nbd_ioctl+0x584/0x8e0
 __blkdev_driver_ioctl
 blkdev_ioctl+0x2a0/0x6e0
 block_ioctl+0xee/0x130
 vfs_ioctl
 __do_sys_ioctl
 __se_sys_ioctl+0x138/0x190
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x61/0xc6

Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230911023308.3467802-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: add ALWAYS_POLL quirk for Apple kb

[ Upstream commit c55092187d9ad7b2f8f5a8645286fa03997d442f ]

These devices disconnect if suspended without remote wakeup. They can operate
with the standard driver.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: glorious: fix Glorious Model I HID report

[ Upstream commit a5e913c25b6b2b6ae02acef6d9400645ac03dfdf ]

The Glorious Model I mouse has a buggy HID report descriptor for its
keyboard endpoint (used for programmable buttons). For report ID 2, there
is a mismatch between Logical Minimum and Usage Minimum in the array that
reports keycodes.

The offending portion of the descriptor: (from hid-decode)

0x95, 0x05,                    //  Report Count (5)                   30
0x75, 0x08,                    //  Report Size (8)                    32
0x15, 0x00,                    //  Logical Minimum (0)                34
0x25, 0x65,                    //  Logical Maximum (101)              36
0x05, 0x07,                    //  Usage Page (Keyboard)              38
0x19, 0x01,                    //  Usage Minimum (1)                  40
0x29, 0x65,                    //  Usage Maximum (101)                42
0x81, 0x00,                    //  Input (Data,Arr,Abs)               44

This bug shifts all programmed keycodes up by 1. Importantly, this causes
"empty" array indexes of 0x00 to be interpreted as 0x01, ErrorRollOver.
The presence of ErrorRollOver causes the system to ignore all keypresses
from the endpoint and breaks the ability to use the programmable buttons.

Setting byte 41 to 0x00 fixes this, and causes keycodes to be interpreted
correctly.

Also, USB_VENDOR_ID_GLORIOUS is changed to USB_VENDOR_ID_SINOWEALTH,
and a new ID for Laview Technology is added. Glorious seems to be
white-labeling controller boards or mice from these vendors. There isn't a
single canonical vendor ID for Glorious products.

Signed-off-by: Brett Raye <braye@fastmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: apple: add Jamesdonkey and A3R to non-apple keyboards list

[ Upstream commit 113f736655e4f20633e107d731dd5bd097d5938c ]

Jamesdonkey A3R keyboard is identified as "Jamesdonkey A3R" in wired
mode, "A3R-U" in wireless mode and "A3R" in bluetooth mode. Adding them
to non-apple keyboards fixes function key.

Signed-off-by: Yihong Cao <caoyihong4@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: mcp2221: Allow IO to start during probe

[ Upstream commit 73ce9f1f2741a38f5d27393e627702ae2c46e6f2 ]

During the probe we add an I2C adapter and as soon as we add that adapter
it may be used for a transfer (e.g via the code in i2cdetect()).
Those transfers are not able to complete and time out. This is because the
HID raw_event callback (mcp2221_raw_event) will not be invoked until the
HID device's 'driver_input_lock' is marked up at the completion of the
probe in hid_device_probe(). This starves the driver of the responses it
is waiting for.
In order to allow the I2C transfers to complete while we are still in the
probe, start the IO once we have completed init of the HID device.

This issue seems to have been seen before and a patch was submitted but
it seems it was never accepted. See:
https://lore.kernel.org/all/20221103222714.21566-3-Enrik.Berkhan@inka.de/

Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: mcp2221: Set driver data before I2C adapter add

[ Upstream commit f2d4a5834638bbc967371b9168c0b481519f7c5e ]

The process of adding an I2C adapter can invoke I2C accesses on that new
adapter (see i2c_detect()).

Ensure we have set the adapter's driver data to avoid null pointer
dereferences in the xfer functions during the adapter add.

This has been noted in the past and the same fix proposed but not
completed. See:
https://lore.kernel.org/lkml/ef597e73-ed71-168e-52af-0d19b03734ac@vigem.de/

Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: intel_telemetry: Fix kernel doc descriptions

[ Upstream commit a6584711e64d9d12ab79a450ec3628fd35e4f476 ]

LKP found issues with a kernel doc in the driver:

core.c:116: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_update_events'
core.c:188: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_get_eventconfig'

It looks like it were copy'n'paste typos when these descriptions
had been introduced. Fix the typos.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310070743.WALmRGSY-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231120150756.1661425-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

LoongArch: Implement constant timer shutdown interface

[ Upstream commit d43f37b73468c172bc89ac4824a1511b411f0778 ]

When a cpu is hot-unplugged, it is put in idle state and the function
arch_cpu_idle_dead() is called. The timer interrupt for this processor
should be disabled, otherwise there will be pending timer interrupt for
the unplugged cpu, so that vcpu is prevented from giving up scheduling
when system is running in vm mode.

This patch implements the timer shutdown interface so that the constant
timer will be properly disabled when a CPU is hot-unplugged.

Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>

LoongArch: Mark {dmw,tlb}_virt_to_page() exports as non-GPL

[ Upstream commit 19d86a496233731882aea7ec24505ce6641b1c0c ]

Mark {dmw,tlb}_virt_to_page() exports as non-GPL, in order to let
out-of-tree modules (e.g. OpenZFS) be built without errors. Otherwise
we get:

ERROR: modpost: GPL-incompatible module zfs.ko uses GPL-only symbol 'dmw_virt_to_page'
ERROR: modpost: GPL-incompatible module zfs.ko uses GPL-only symbol 'tlb_virt_to_page'

Reported-by: Haowu Ge <gehaowu@bitmoe.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>

LoongArch: Silence the boot warning about 'nokaslr'

[ Upstream commit 902d75cdf0cf0a3fb58550089ee519abf12566f5 ]

The kernel parameter 'nokaslr' is handled before start_kernel(), so we
don't need early_param() to mark it technically. But it can cause a boot
warning as follows:

Unknown kernel command line parameters "nokaslr", will be passed to user space.

When we use 'init=/bin/bash', 'nokaslr' which passed to user space will
even cause a kernel panic. So we use early_param() to mark 'nokaslr',
simply print a notice and silence the boot warning (also fix a potential
panic). This logic is similar to RISC-V.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>

LoongArch: Record pc instead of offset in la_abs relocation

[ Upstream commit aa0cbc1b506b090c3a775b547c693ada108cc0d7 ]

To clarify, the previous version functioned flawlessly. However, it's
worth noting that the LLVM's LoongArch backend currently lacks support
for cross-section label calculations. With this patch, we enable the use
of clang to compile relocatable kernels.

Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>

LoongArch: Add dependency between vmlinuz.efi and vmlinux.efi

[ Upstream commit d3ec75bc635cb0cb8185b63293d33a3d1b942d22 ]

A common issue in Makefile is a race in parallel building.

You need to be careful to prevent multiple threads from writing to the
same file simultaneously.

Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not
generate invalid images") addressed such a bad scenario.

A similar symptom occurs with the following command:

  $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
    [ snip ]
    SORTTAB vmlinux
    OBJCOPY arch/loongarch/boot/vmlinux.efi
    OBJCOPY arch/loongarch/boot/vmlinux.efi
    PAD     arch/loongarch/boot/vmlinux.bin
    GZIP    arch/loongarch/boot/vmlinuz
    OBJCOPY arch/loongarch/boot/vmlinuz.o
    LD      arch/loongarch/boot/vmlinuz.efi.elf
    OBJCOPY arch/loongarch/boot/vmlinuz.efi

The log "OBJCOPY arch/loongarch/boot/vmlinux.efi" is displayed twice.

It indicates that two threads simultaneously enter arch/loongarch/boot/
and write to arch/loongarch/boot/vmlinux.efi.

It occasionally leads to a build failure:

  $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
    [ snip ]
    SORTTAB vmlinux
    OBJCOPY arch/loongarch/boot/vmlinux.efi
    PAD     arch/loongarch/boot/vmlinux.bin
  truncate: Invalid number: ‘arch/loongarch/boot/vmlinux.bin’
  make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13:
  arch/loongarch/boot/vmlinux.bin] Error 1
  make[2]: *** Deleting file 'arch/loongarch/boot/vmlinux.bin'
  make[1]: *** [arch/loongarch/Makefile:146: vmlinuz.efi] Error 2
  make[1]: *** Waiting for unfinished jobs....
  make: *** [Makefile:234: __sub-make] Error 2

vmlinuz.efi depends on vmlinux.efi, but such a dependency is not
specified in arch/loongarch/Makefile.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: fix bpf_loop_bench for new callback verification scheme

[ Upstream commit f40bfd1679446b22d321e64a1fa98b7d07d2be08 ]

This is a preparatory change. A follow-up patch "bpf: verify callbacks
as if they are called unknown number of times" changes logic for
callbacks handling. While previously callbacks were verified as a
single function call, new scheme takes into account that callbacks
could be executed unknown number of times.

This has dire implications for bpf_loop_bench:

    SEC("fentry/" SYS_PREFIX "sys_getpgid")
    int benchmark(void *ctx)
    {
            for (int i = 0; i < 1000; i++) {
                    bpf_loop(nr_loops, empty_callback, NULL, 0);
                    __sync_add_and_fetch(&hits, nr_loops);
            }
            return 0;
    }

W/o callbacks change verifier sees it as a 1000 calls to
empty_callback(). However, with callbacks change things become
exponential:
- i=0: state exploring empty_callback is scheduled with i=0 (a);
- i=1: state exploring empty_callback is scheduled with i=1;
  ...
- i=999: state exploring empty_callback is scheduled with i=999;
- state (a) is popped from stack;
- i=1: state exploring empty_callback is scheduled with i=1;
  ...

Avoid this issue by rewriting outer loop as bpf_loop().
Unfortunately, this adds a function call to a loop at runtime, which
negatively affects performance:

            throughput               latency
   before:  149.919 ± 0.168 M ops/s, 6.670 ns/op
   after :  137.040 ± 0.187 M ops/s, 7.297 ns/op

Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: catch errors from nvme_configure_metadata()

[ Upstream commit cd9aed606088d36a7ffff3e808db4e76b1854285 ]

nvme_configure_metadata() is issuing I/O, so we might incur an I/O
error which will cause the connection to be reset.
But in that case any further probing will race with reset and
cause UAF errors.
So return a status from nvme_configure_metadata() and abort
probing if there was an I/O error.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-auth: set explanation code for failure2 msgs

[ Upstream commit 38ce1570e2c46e7e9af983aa337edd7e43723aa2 ]

Some error cases were not setting an auth-failure-reason-code-explanation.
This means an AUTH_Failure2 message will be sent with an explanation value
of 0 which is a reserved value.

Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: fix null-ptr-dereference while accessing 'nbd->config'

[ Upstream commit c2da049f419417808466c529999170f5c3ef7d3d ]

Memory reordering may occur in nbd_genl_connect(), causing config_refs
to be set to 1 while nbd->config is still empty. Opening nbd at this
time will cause null-ptr-dereference.

   T1                      T2
   nbd_open
    nbd_get_config_unlocked
                     nbd_genl_connect
                      nbd_alloc_and_init_config
                       //memory reordered
                        refcount_set(&nbd->config_refs, 1)  // 2
     nbd->config
      ->null point
     nbd->config = config  // 1

Fix it by adding smp barrier to guarantee the execution sequence.

Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-4-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: factor out a helper to get nbd_config without holding 'config_lock'

[ Upstream commit 3123ac77923341774ca3ad1196ad20bb0732bf70 ]

There are no functional changes, just to make code cleaner and prepare
to fix null-ptr-dereference while accessing 'nbd->config'.

Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-3-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: fold nbd config initialization into nbd_alloc_config()

[ Upstream commit 1b59860540a4018e8071dc18d4893ec389506b7d ]

There are no functional changes, make the code cleaner and prepare to
fix null-ptr-dereference while accessing 'nbd->config'.

Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-2-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: avoid NULL checking to c->root in run_cache_set()

[ Upstream commit 3eba5e0b2422aec3c9e79822029599961fdcab97 ]

In run_cache_set() after c->root returned from bch_btree_node_get(), it
is checked by IS_ERR_OR_NULL(). Indeed it is unncessary to check NULL
because bch_btree_node_get() will not return NULL pointer to caller.

This patch replaces IS_ERR_OR_NULL() by IS_ERR() for the above reason.

Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-11-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: add code comments for bch_btree_node_get() and __bch_btree_node_alloc()

[ Upstream commit 31f5b956a197d4ec25c8a07cb3a2ab69d0c0b82f ]

This patch adds code comments to bch_btree_node_get() and
__bch_btree_node_alloc() that NULL pointer will not be returned and it
is unnecessary to check NULL pointer by the callers of these routines.

Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-10-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: remove redundant assignment to variable cur_idx

[ Upstream commit be93825f0e6428c2d3f03a6e4d447dc48d33d7ff ]

Variable cur_idx is being initialized with a value that is never read,
it is being re-assigned later in a while-loop. Remove the redundant
assignment. Cleans up clang scan build warning:

drivers/md/bcache/writeback.c:916:2: warning: Value stored to 'cur_idx'
is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: avoid oversize memory allocation by small stripe_size

[ Upstream commit baf8fb7e0e5ec54ea0839f0c534f2cdcd79bea9c ]

Arraies bcache->stripe_sectors_dirty and bcache->full_dirty_stripes are
used for dirty data writeback, their sizes are decided by backing device
capacity and stripe size. Larger backing device capacity or smaller
stripe size make these two arraies occupies more dynamic memory space.

Currently bcache->stripe_size is directly inherited from
queue->limits.io_opt of underlying storage device. For normal hard
drives, its limits.io_opt is 0, and bcache sets the corresponding
stripe_size to 1TB (1<<31 sectors), it works fine 10+ years. But for
devices do declare value for queue->limits.io_opt, small stripe_size
(comparing to 1TB) becomes an issue for oversize memory allocations of
bcache->stripe_sectors_dirty and bcache->full_dirty_stripes, while the
capacity of hard drives gets much larger in recent decade.

For example a raid5 array assembled by three 20TB hardrives, the raid
device capacity is 40TB with typical 512KB limits.io_opt. After the math
calculation in bcache code, these two arraies will occupy 400MB dynamic
memory. Even worse Andrea Tomassetti reports that a 4KB limits.io_opt is
declared on a new 2TB hard drive, then these two arraies request 2GB and
512MB dynamic memory from kzalloc(). The result is that bcache device
always fails to initialize on his system.

To avoid the oversize memory allocation, bcache->stripe_size should not
directly inherited by queue->limits.io_opt from the underlying device.
This patch defines BCH_MIN_STRIPE_SZ (4MB) as minimal bcache stripe size
and set bcache device's stripe size against the declared limits.io_opt
value from the underlying storage device,
- If the declared limits.io_opt > BCH_MIN_STRIPE_SZ, bcache device will
  set its stripe size directly by this limits.io_opt value.
- If the declared limits.io_opt < BCH_MIN_STRIPE_SZ, bcache device will
  set its stripe size by a value multiplying limits.io_opt and euqal or
  large than BCH_MIN_STRIPE_SZ.

Then the minimal stripe size of a bcache device will always be >= 4MB.
For a 40TB raid5 device with 512KB limits.io_opt, memory occupied by
bcache->stripe_sectors_dirty and bcache->full_dirty_stripes will be 50MB
in total. For a 2TB hard drive with 4KB limits.io_opt, memory occupied
by these two arraies will be 2.5MB in total.

Such mount of memory allocated for bcache->stripe_sectors_dirty and
bcache->full_dirty_stripes is reasonable for most of storage devices.

Reported-by: Andrea Tomassetti <andrea.tomassetti-opensource@devo.com>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@lists.ewheeler.net>
Link: https://lore.kernel.org/r/20231120052503.6122-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-cgroup: bypass blkcg_deactivate_policy after destroying

[ Upstream commit e63a57303599b17290cd8bc48e6f20b24289a8bc ]

blkcg_deactivate_policy() can be called after blkg_destroy_all()
returns, and it isn't necessary since blkg_destroy_all has covered
policy deactivation.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231117023527.3188627-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-throttle: fix lockdep warning of "cgroup_mutex or RCU read lock required!"

[ Upstream commit 27b13e209ddca5979847a1b57890e0372c1edcee ]

Inside blkg_for_each_descendant_pre(), both
css_for_each_descendant_pre() and blkg_lookup() requires RCU read lock,
and either cgroup_assert_mutex_or_rcu_locked() or rcu_read_lock_held()
is called.

Fix the warning by adding rcu read lock.

Reported-by: Changhui Zhong <czhong@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231117023527.3188627-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix some minor issues with bundle tracing

[ Upstream commit 0c3bd086d12d185650d095a906662593ec607bd0 ]

Fix some superficial issues with the tracing of rxrpc_bundle structs,
including:

 (1) Set the debug_id when the bundle is allocated rather than when it is
     set up so that the "NEW" trace line displays the correct bundle ID.

 (2) Show the refcount when emitting the "FREE" traceline.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

stmmac: dwmac-loongson: Add architecture dependency

[ Upstream commit 7fbd5fc2b35a8f559a6b380dfa9bcd964a758186 ]

Only present the DWMAC_LOONGSON option on architectures where it can
actually be used.

This follows the same logic as the DWMAC_INTEL option.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: aqc111: check packet for fixup for true limit

[ Upstream commit ccab434e674ca95d483788b1895a70c21b7f016a ]

If a device sends a packet that is inbetween 0
and sizeof(u64) the value passed to skb_trim()
as length will wrap around ending up as some very
large value.

The driver will then proceed to parse the header
located at that position, which will either oops or
process some random value.

The fix is to check against sizeof(u64) rather than
0, which the driver currently does. The issue exists
since the introduction of the driver.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/hyperv: Fix the detection of E820_TYPE_PRAM in a Gen2 VM

[ Upstream commit 7e8037b099c0bbe8f2109dc452dbcab8d400fc53 ]

A Gen2 VM doesn't support legacy PCI/PCIe, so both raw_pci_ops and
raw_pci_ext_ops are NULL, and pci_subsys_init() -> pcibios_init()
doesn't call pcibios_resource_survey() -> e820__reserve_resources_late();
as a result, any emulated persistent memory of E820_TYPE_PRAM (12) via
the kernel parameter memmap=nn[KMG]!ss is not added into iomem_resource
and hence can't be detected by register_e820_pmem().

Fix this by directly calling e820__reserve_resources_late() in
hv_pci_init(), which is called from arch_initcall(pci_arch_init).

It's ok to move a Gen2 VM's e820__reserve_resources_late() from
subsys_initcall(pci_subsys_init) to arch_initcall(pci_arch_init) because
the code in-between doesn't depend on the E820 resources.
e820__reserve_resources_late() depends on e820__reserve_resources(),
which has been called earlier from setup_arch().

For a Gen-2 VM, the new hv_pci_init() also adds any memory of
E820_TYPE_PMEM (7) into iomem_resource, and acpi_nfit_register_region() ->
acpi_nfit_insert_resource() -> region_intersects() returns
REGION_INTERSECTS, so the memory of E820_TYPE_PMEM won't get added twice.

Changed the local variable "int gen2vm" to "bool gen2vm".

Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1699691867-9827-1-git-send-email-ssengar@linux.microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/mm: cow: print ksft header before printing anything else

[ Upstream commit a6fcd57cf2df409d35e9225b8dbad6f937b28df0 ]

Doing a ksft_print_msg() before the ksft_print_header() seems to confuse
the ksft framework in a strange way: running the test on the cmdline
results in the expected output.

But piping the output somewhere else, results in some odd output,
whereby we repeatedly get the same info printed:
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
TAP version 13
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
TAP version 13
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
ok 1 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped out base page
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled

Doing the ksft_print_header() first seems to resolve that and gives us
the output we expect:
TAP version 13
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
ok 1 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped out base page
ok 2 No leak from parent into child
# [RUN] Basic COW after fork() ... with THP
ok 3 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped-out THP
ok 4 No leak from parent into child
# [RUN] Basic COW after fork() ... with PTE-mapped THP
ok 5 No leak from parent into child

Link: https://lkml.kernel.org/r/20231206103558.38040-1-david@redhat.com
Fixes: f4b5fd6946e2 ("selftests/vm: anon_cow: THP tests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Use internal class when counting engine resets

[ Upstream commit 1f721a93a528268fa97875cff515d1fcb69f4f44 ]

Commit 503579448db9 ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class")
made the GSC0 engine not have a valid uabi class and so broke the engine
reset counting, which in turn was made class based in cb823ed9915b ("drm/i915/gt: Use intel_gt as the primary object for handling resets").

Despite the title and commit text of the latter is not mentioning it (and
has left the storage array incorrectly sized), tracking by class, despite
it adding aliasing in hypthotetical multi-tile systems, is handy for
virtual engines which for instance do not have a valid engine->id.

Therefore we keep that but just change it to use the internal class which
is always valid. We also add a helper to increment the count, which
aligns with the existing getter.

What was broken without this fix were out of bounds reads every time a
reset would happen on the GSC0 engine, or during selftests when storing
and cross-checking the counts in igt_live_test_begin and
igt_live_test_end.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 503579448db9 ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class")
[tursulin: fixed Fixes tag]
Reported-by: Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201122109.729006-2-tvrtko.ursulin@linux.intel.com
(cherry picked from commit cf9cb028ac56696ff879af1154c4b2f0b12701fd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/selftests: Fix engine reset count storage for multi-tile

[ Upstream commit 7c7c863bf89c5f76d8c7fda177a81559b61dc15b ]

Engine->id namespace is per-tile so struct igt_live_test->reset_engine[]
needs to be two-dimensional so engine reset counts from all tiles can be
stored with no aliasing. With aliasing, if we had a real multi-tile
platform, the reset counts would be incorrect for same engine instance on
different tiles.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 0c29efa23f5c ("drm/i915/selftests: Consider multi-gt instead of to_gt()")
Reported-by: Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201122109.729006-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 0647ece3819b018cb62a71c3bcb7c2c3243e78ac)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

accel/ivpu/37xx: Fix interrupt_clear_with_0 WA initialization

[ Upstream commit 35c49cfc8b702eda7a0d3f05497b16f81b69e289 ]

Using PCI Device ID/Revision to initialize the interrupt_clear_with_0
workaround is problematic - there are many pre-production
steppings with different behavior, even with the same PCI ID/Revision

Instead of checking for PCI Device ID/Revision, check the VPU
buttress interrupt status register behavior - if this register
is not zero after writing 1s it means there register is RW
instead of RW1C and we need to enable the interrupt_clear_with_0
workaround.

Fixes: 7f34e01f77f8 ("accel/ivpu: Clear specific interrupt status bits on C0")
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/all/20231204122331.40560-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

accel/ivpu: Print information about used workarounds

[ Upstream commit eefa13a69053a09f20b2d1c00dda59be9c98cfe9 ]

Use ivpu_dbg(MISC) to print information about workarounds.

Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-6-stanislaw.gruszka@linux.intel.com
Stable-dep-of: 35c49cfc8b70 ("accel/ivpu/37xx: Fix interrupt_clear_with_0 WA initialization")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Add spinlock for setting vblank event in atomic_begin

[ Upstream commit fe4c5f662097978b6c91c23a13c24ed92339a180 ]

Add spinlock protection to avoid race condition on vblank event
between mtk_drm_crtc_atomic_begin() and mtk_drm_finish_page_flip().

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230920090658.31181-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: fix kernel oops if no crtc is found

[ Upstream commit 4662817aed5a9d6c695658d0105d8ff4b84ac6cb ]

drm_crtc_from_index(0) might return NULL if there are no CRTCs
registered at all which will lead to a kernel oops in
mtk_drm_crtc_dma_dev_get(). Add the missing return value check.

Fixes: 0d9eee9118b7 ("drm/mediatek: Add drm ovl_adaptor sub driver for MT8195")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230905084922.3908121-1-mwalle@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: vmd: Fix potential deadlock when enabling ASPM

commit 49de0dc87965079a8e2803ee4b39f9d946259423 upstream.

The vmd_pm_enable_quirk() helper is called from pci_walk_bus() during
probe to enable ASPM for controllers with VMD_FEAT_BIOS_PM_QUIRK set.

Since pci_walk_bus() already holds a pci_bus_sem read lock, use
pci_enable_link_state_locked() to enable link states in order to avoid a
potential deadlock (e.g. in case someone takes a write lock before
reacquiring the read lock).

Fixes: f492edb40b54 ("PCI: vmd: Add quirk to configure PCIe ASPM and LTR")
Link: https://lore.kernel.org/r/20231128081512.19387-3-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: add "potential" in subject since the deadlock has only been
reported by lockdep, include helper name in commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.3
Cc: Michael Bottini <michael.a.bottini@linux.intel.com>
Cc: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix wrong name of SMB2_CREATE_ALLOCATION_SIZE

commit 13736654481198e519059d4a2e2e3b20fa9fdb3e upstream.

MS confirm that "AISi" name of SMB2_CREATE_ALLOCATION_SIZE in MS-SMB2
specification is a typo. cifs/ksmbd have been using this wrong name from
MS-SMB2. It should be "AlSi". Also It will cause problem when running
smb2.create.open test in smbtorture against ksmbd.

Cc: stable@vger.kernel.org
Fixes: 12197a7fdda9 ("Clarify SMB2/SMB3 create context and add missing ones")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/ASPM: Add pci_enable_link_state_locked()

commit 718ab8226636a1a3a7d281f5d6a7ad7c925efe5a upstream.

Add pci_enable_link_state_locked() for enabling link states that can be
used in contexts where a pci_bus_sem read lock is already held (e.g. from
pci_walk_bus()).

This helper will be used to fix a couple of potential deadlocks where
the current helper is called with the lock already held, hence the CC
stable tag.

Fixes: f492edb40b54 ("PCI: vmd: Add quirk to configure PCIe ASPM and LTR")
Link: https://lore.kernel.org/r/20231128081512.19387-2-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: include helper name in subject, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.3
Cc: Michael Bottini <michael.a.bottini@linux.intel.com>
Cc: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: loongson: Limit MRRS to 256

commit ef61a0405742a9f7f6051bc6fd2f017d87d07911 upstream.

This is a partial revert of 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS
increases") for MIPS-based Loongson.

Some MIPS Loongson systems don't support arbitrary Max_Read_Request_Size
(MRRS) settings.  8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS
increases") worked around that by (1) assuming that firmware configured
MRRS to the maximum supported value and (2) preventing the PCI core from
increasing MRRS.

Unfortunately, some firmware doesn't set that maximum MRRS correctly, which
results in devices not being initialized correctly.  One symptom, from the
Debian report below, is this:

  ata4.00: exception Emask 0x0 SAct 0x20000000 SErr 0x0 action 0x6 frozen
  ata4.00: failed command: WRITE FPDMA QUEUED
  ata4.00: cmd 61/20:e8:00:f0:e1/00:00:00:00:00/40 tag 29 ncq dma 16384 out
           res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
  ata4.00: status: { DRDY }
  ata4: hard resetting link

Limit MRRS to 256 because MIPS Loongson with higher MRRS support is
considered rare.

This must be done at device enablement stage because the MRRS setting may
get lost if PCI_COMMAND_MASTER on the parent bridge is cleared, and we are
only sure parent bridge is enabled at this point.

Fixes: 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS increases")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217680
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1035587
Link: https://lore.kernel.org/r/20231201115028.84351-1-jiaxun.yang@flygoat.com
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "PCI: acpiphp: Reassign resources on bridge if necessary"

commit 5df12742b7e3aae2594a30a9d14d5d6e9e7699f4 upstream.

This reverts commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 and the
subsequent fix to it:

  cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")

40613da52b13 fixed a problem where hot-adding a device with large BARs
failed if the bridge windows programmed by firmware were not large enough.

cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources()
only for non-root bus") fixed a problem with 40613da52b13: an ACPI hot-add
of a device on a PCI root bus (common in the virt world) or firmware
sending ACPI Bus Check to non-existent Root Ports (e.g., on Dell Inspiron
7352/0W6WV0) caused a NULL pointer dereference and suspend/resume hangs.

Unfortunately the combination of 40613da52b13 and cc22522fd55e caused other
problems:

  - Fiona reported that hot-add of SCSI disks in QEMU virtual machine fails
    sometimes.

  - Dongli reported a similar problem with hot-add of SCSI disks.

  - Jonathan reported a console freeze during boot on bare metal due to an
    error in radeon GPU initialization.

Revert both patches to avoid adding these problems.  This means we will
again see the problems with hot-adding devices with large BARs and the NULL
pointer dereferences and suspend/resume issues that 40613da52b13 and
cc22522fd55e were intended to fix.

Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
Fixes: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Closes: https://lore.kernel.org/r/9eb669c0-d8f2-431d-a700-6da13053ae54@proxmox.com
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Closes: https://lore.kernel.org/r/3c4a446a-b167-11b8-f36f-d3c1b49b42e9@oracle.com
Reported-by: Jonathan Woithe <jwoithe@just42.net>
Closes: https://lore.kernel.org/r/ZXpaNCLiDM+Kv38H@marvin.atrad.com.au
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/tas2781: reset the amp before component_add

commit 315deab289924c83ab1ded50022e8db95d6e428b upstream.

Calling component_add starts loading the firmware, the callback function
writes the program to the amplifiers. If the module resets the
amplifiers after component_add, it happens that one of the amplifiers
does not work because the reset and program writing are interleaving.

Call tas2781_reset before component_add to ensure reliable
initialization.

Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/4d23bf58558e23ee8097de01f70f1eb8d9de2d15.1702511246.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/tas2781: call cleanup functions only once

commit 6c6fa2641402e8e753262fb61ed9a15a7cb225ad upstream.

If the module can load the RCA but not the firmware binary, it will call
the cleanup functions. Then unloading the module causes general
protection fault due to double free.

Do not call the cleanup functions in tasdev_fw_ready.

general protection fault, probably for non-canonical address
0x6f2b8a2bff4c8fec: 0000 [#1] PREEMPT SMP NOPTI
Call Trace:
 <TASK>
 ? die_addr+0x36/0x90
 ? exc_general_protection+0x1c5/0x430
 ? asm_exc_general_protection+0x26/0x30
 ? tasdevice_config_info_remove+0x6d/0xd0 [snd_soc_tas2781_fmwlib]
 tas2781_hda_unbind+0xaa/0x100 [snd_hda_scodec_tas2781_i2c]
 component_unbind+0x2e/0x50
 component_unbind_all+0x92/0xa0
 component_del+0xa8/0x140
 tas2781_hda_remove.isra.0+0x32/0x60 [snd_hda_scodec_tas2781_i2c]
 i2c_device_remove+0x26/0xb0

Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/1a0885c424bb21172702d254655882b59ef6477a.1702510018.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/tas2781: handle missing EFI calibration data

commit 33071422714a4c9587753b0ccc130ca59323bf42 upstream.

The code does not properly check whether the calibration variable is
available in the EFI. If it is not available, it causes a NULL pointer
dereference.

Check the return value of the first get_variable call also.

BUG: kernel NULL pointer dereference, address: 0000000000000000
Call Trace:
 <TASK>
 ? __die+0x23/0x70
 ? page_fault_oops+0x171/0x4e0
 ? srso_alias_return_thunk+0x5/0x7f
 ? schedule+0x5e/0xd0
 ? exc_page_fault+0x7f/0x180
 ? asm_exc_page_fault+0x26/0x30
 ? crc32_body+0x2c/0x120
 ? tas2781_save_calibration+0xe4/0x220 [snd_hda_scodec_tas2781_i2c]
 tasdev_fw_ready+0x1af/0x280 [snd_hda_scodec_tas2781_i2c]
 request_firmware_work_func+0x59/0xa0

Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/f1f6583bda918f78556f67d522ca7b3b91cebbd5.1702251102.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/tas2781: leave hda_component in usable state

commit 75a25d31b80770485641ad2789a854955f5c1e40 upstream.

Unloading then loading the module causes a NULL ponter dereference.

The hda_unbind zeroes the hda_component, later the hda_bind tries
to dereference the codec field.

The hda_component is only initialized once by tas2781_generic_fixup.

Set only previously modified fields to NULL.

BUG: kernel NULL pointer dereference, address: 0000000000000322
Call Trace:
 <TASK>
 ? __die+0x23/0x70
 ? page_fault_oops+0x171/0x4e0
 ? exc_page_fault+0x7f/0x180
 ? asm_exc_page_fault+0x26/0x30
 ? tas2781_hda_bind+0x59/0x140 [snd_hda_scodec_tas2781_i2c]
 component_bind_all+0xf3/0x240
 try_to_bring_up_aggregate_device+0x1c3/0x270
 __component_add+0xbc/0x1a0
 tas2781_hda_i2c_probe+0x289/0x3a0 [snd_hda_scodec_tas2781_i2c]
 i2c_device_probe+0x136/0x2e0

Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/8b8ed2bd5f75fbb32e354a3226c2f966fa85b46b.1702156522.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Apply mute LED quirk for HP15-db

commit 9b726bf6ae11add6a7a52883a21f90ff9cbca916 upstream.

The HP laptop 15-db0403ng uses the ALC236 codec and controls the mute
LED using COEF 0x07 index 1.
Sound card subsystem: Hewlett-Packard Company Device [103c:84ae]

Use the existing quirk for this model.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/e61815d0-f1c7-b164-e49d-6ca84771476a@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/hdmi: add force-connect quirks for ASUSTeK Z170 variants

commit 924f5ca2975b2993ee81a7ecc3c809943a70f334 upstream.

On ASUSTeK Z170M PLUS and Z170 PRO GAMING systems, the display codec
pins are not registered properly without the force-connect quirk. The
codec will report only one pin as having external connectivity, but i915
finds all three connectors on the system, so the two drivers are not
in sync.

Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio.

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9801
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231208132127.2438067-3-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/hdmi: add force-connect quirk for NUC5CPYB

commit 3b1ff57e24a7bcd2e2a8426dd2013a80d1fa96eb upstream.

Add one more older NUC model that requires quirk to force all pins to be
connected. The display codec pins are not registered properly without
the force-connect quirk. The codec will report only one pin as having
external connectivity, but i915 finds all three connectors on the
system, so the two drivers are not in sync.

Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio.

Link: https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/issues/3
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231208132127.2438067-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/cmd: fix breakage in SOCKET_URING_OP_SIOC* implementation

commit 1ba0e9d69b2000e95267c888cbfa91d823388d47 upstream.

In 8e9fad0e70b7 "io_uring: Add io_uring command support for sockets"
you've got an include of asm-generic/ioctls.h done in io_uring/uring_cmd.c.
That had been done for the sake of this chunk -
+               ret = prot->ioctl(sk, SIOCINQ, &arg);
+               if (ret)
+                       return ret;
+               return arg;
+       case SOCKET_URING_OP_SIOCOUTQ:
+               ret = prot->ioctl(sk, SIOCOUTQ, &arg);

SIOC{IN,OUT}Q are defined to symbols (FIONREAD and TIOCOUTQ) that come from
ioctls.h, all right, but the values vary by the architecture.

FIONREAD is
0x467F on mips
0x4004667F on alpha, powerpc and sparc
0x8004667F on sh and xtensa
0x541B everywhere else
TIOCOUTQ is
0x7472 on mips
0x40047473 on alpha, powerpc and sparc
0x80047473 on sh and xtensa
0x5411 everywhere else

->ioctl() expects the same values it would've gotten from userland; all
places where we compare with SIOC{IN,OUT}Q are using asm/ioctls.h, so
they pick the correct values.  io_uring_cmd_sock(), OTOH, ends up
passing the default ones.

Fixes: 8e9fad0e70b7 ("io_uring: Add io_uring command support for sockets")
Cc: <stable@vger.kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20231214213408.GT1674809@ZenIV
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: dax: set fc->dax to NULL in fuse_dax_conn_free()

commit 7f8ed28d1401320bcb02dda81b3c23ab2dc5a6d8 upstream.

fuse_dax_conn_free() will be called when fuse_fill_super_common() fails
after fuse_dax_conn_alloc(). Then deactivate_locked_super() in
virtio_fs_get_tree() will call virtio_kill_sb() to release the discarded
superblock. This will call fuse_dax_conn_free() again in fuse_conn_put(),
resulting in a possible double free.

Fixes: 1dd539577c42 ("virtiofs: add a mount option to enable dax")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # v5.10
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: disable FOPEN_PARALLEL_DIRECT_WRITES with FUSE_DIRECT_IO_ALLOW_MMAP

commit 3f29f1c336c0e8a4bec52f1e5217f88835553e5b upstream.

The new fuse init flag FUSE_DIRECT_IO_ALLOW_MMAP breaks assumptions made by
FOPEN_PARALLEL_DIRECT_WRITES and causes test generic/095 to hit
BUG_ON(fi->writectr < 0) assertions in fuse_set_nowrite():

generic/095 5s ...
  kernel BUG at fs/fuse/dir.c:1756!
...
  ? fuse_set_nowrite+0x3d/0xdd
  ? do_raw_spin_unlock+0x88/0x8f
  ? _raw_spin_unlock+0x2d/0x43
  ? fuse_range_is_writeback+0x71/0x84
  fuse_sync_writes+0xf/0x19
  fuse_direct_io+0x167/0x5bd
  fuse_direct_write_iter+0xf0/0x146

Auto disable FOPEN_PARALLEL_DIRECT_WRITES when server negotiated
FUSE_DIRECT_IO_ALLOW_MMAP.

Fixes: e78662e818f9 ("fuse: add a new fuse init flag to relax restrictions in no cache mode")
Cc: <stable@vger.kernel.org> # v6.6
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: share lookup state between submount and its parent

commit c4d361f66ac91db8fc65061a9671682f61f4ca9d upstream.

Fuse submounts do not perform a lookup for the nodeid that they inherit
from their parent.  Instead, the code decrements the nlookup on the
submount's fuse_inode when it is instantiated, and no forget is
performed when a submount root is evicted.

Trouble arises when the submount's parent is evicted despite the
submount itself being in use.  In this author's case, the submount was
in a container and deatched from the initial mount namespace via a
MNT_DEATCH operation.  When memory pressure triggered the shrinker, the
inode from the parent was evicted, which triggered enough forgets to
render the submount's nodeid invalid.

Since submounts should still function, even if their parent goes away,
solve this problem by sharing refcounted state between the parent and
its submount.  When all of the references on this shared state reach
zero, it's safe to forget the final lookup of the fuse nodeid.

Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: stable@vger.kernel.org
Fixes: 1866d779d5d2 ("fuse: Allow fuse_fill_super_common() for submounts")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: Rename DIRECT_IO_RELAX to DIRECT_IO_ALLOW_MMAP

commit c55e0a55b165202f18cbc4a20650d2e1becd5507 upstream.

Although DIRECT_IO_RELAX's initial usage is to allow shared mmap, its
description indicates a purpose of reducing memory footprint. This
may imply that it could be further used to relax other DIRECT_IO
operations in the future.

Replace it with a flag DIRECT_IO_ALLOW_MMAP which does only one thing,
allow shared mmap of DIRECT_IO files while still bypassing the cache
on regular reads and writes.

[Miklos] Also Keep DIRECT_IO_RELAX definition for backward compatibility.

Signed-off-by: Tyler Fanelli <tfanelli@redhat.com>
Fixes: e78662e818f9 ("fuse: add a new fuse init flag to relax restrictions in no cache mode")
Cc: <stable@vger.kernel.org> # v6.6
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: Add quirk for Labtec/ODDOR/aikeec handbrake

commit 31e52523267faab5ed8569b9d5c22c9a2283872f upstream.

This device needs ALWAYS_POLL quirk, otherwise it keeps reconnecting
indefinitely. It is a handbrake for sim racing detected as joystick.
Reported and tested by GitHub user N0th1ngM4tt3rs.

Link: https://github.com/sriemer/fix-linux-mouse
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: i2c-hid: Add IDEA5002 to i2c_hid_acpi_blacklist[]

commit a9f68ffe1170ca4bc17ab29067d806a354a026e0 upstream.

Users have reported problems with recent Lenovo laptops that contain
an IDEA5002 I2C HID device. Reports include fans turning on and
running even at idle and spurious wakeups from suspend.

Presumably in the Windows ecosystem there is an application that
uses the HID device. Maybe that puts it into a lower power state so
it doesn't cause spurious events.

This device doesn't serve any functional purpose in Linux as nothing
interacts with it so blacklist it from being probed. This will
prevent the GPIO driver from setting up the GPIO and the spurious
interrupts and wake events will not occur.

Cc: stable@vger.kernel.org # 6.1
Reported-and-tested-by: Marcus Aram <marcus+oss@oxar.nl>
Reported-and-tested-by: Mark Herbert <mark.herbert42@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2812
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cred: get rid of CONFIG_DEBUG_CREDENTIALS

commit ae1914174a63a558113e80d24ccac2773f9f7b2b upstream.

This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.

Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cred: switch to using atomic_long_t

commit f8fa5d76925991976b3e7076f9d1052515ec1fca upstream.

There are multiple ways to grab references to credentials, and the only
protection we have against overflowing it is the memory required to do
so.

With memory sizes only moving in one direction, let's bump the reference
count to 64-bit and move it outside the realm of feasibly overflowing.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: atlantic: fix double free in ring reinit logic

[ Upstream commit 7bb26ea74aa86fdf894b7dbd8c5712c5b4187da7 ]

Driver has a logic leak in ring data allocation/free,
where double free may happen in aq_ring_free if system is under
stress and driver init/deinit is happening.

The probability is higher to get this during suspend/resume cycle.

Verification was done simulating same conditions with

    stress -m 2000 --vm-bytes 20M --vm-hang 10 --backoff 1000
    while true; do sudo ifconfig enp1s0 down; sudo ifconfig enp1s0 up; done

Fixed by explicitly clearing pointers to NULL on deallocation

Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/netdev/CAHk-=wiZZi7FcvqVSUirHBjx0bBUZ4dFrMDVLc3+3HCrtq0rBA@mail.gmail.com/
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20231213094044.22988-1-irusskikh@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

appletalk: Fix Use-After-Free in atalk_ioctl

[ Upstream commit 189ff16722ee36ced4d2a2469d4ab65a8fee4198 ]

Because atalk_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with atalk_recvmsg().
A use-after-free for skb occurs with the following flow.
```
atalk_ioctl() -> skb_peek()
atalk_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
```
Add sk->sk_receive_queue.lock to atalk_ioctl() to fix this issue.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231213041056.GA519680@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: Handle disabled MDIO busses from devicetree

[ Upstream commit e23c0d21ce9234fbc31ece35663ababbb83f9347 ]

Many hardware configurations have the MDIO bus disabled, and are instead
using some other MDIO bus to talk to the MAC's phy.

of_mdiobus_register() returns -ENODEV in this case. Let's handle it
gracefully instead of failing to probe the MAC.

Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20231212-b4-stmmac-handle-mdio-enodev-v2-1-600171acf79f@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: dwmac-qcom-ethqos: Fix drops in 10M SGMII RX

[ Upstream commit 981d947bcd382c3950a593690e0e13d194d65b1c ]

In 10M SGMII mode all the packets are being dropped due to wrong Rx clock.
SGMII 10MBPS mode needs RX clock divider programmed to avoid drops in Rx.
Update configure SGMII function with Rx clk divider programming.

Fixes: 463120c31c58 ("net: stmmac: dwmac-qcom-ethqos: add support for SGMII")
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Sneh Shah <quic_snehshah@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20231212092208.22393-1-quic_snehshah@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dpaa2-switch: do not ask for MDB, VLAN and FDB replay

[ Upstream commit f24a49a375f65e8e75ee1b19d806f46dbaae57fd ]

Starting with commit 4e51bf44a03a ("net: bridge: move the switchdev
object replay helpers to "push" mode") the switchdev_bridge_port_offload()
helper was extended with the intention to provide switchdev drivers easy
access to object addition and deletion replays. This works by calling
the replay helpers with non-NULL notifier blocks.

In the same commit, the dpaa2-switch driver was updated so that it
passes valid notifier blocks to the helper. At that moment, no
regression was identified through testing.

In the meantime, the blamed commit changed the behavior in terms of
which ports get hit by the replay. Before this commit, only the initial
port which identified itself as offloaded through
switchdev_bridge_port_offload() got a replay of all port objects and
FDBs. After this, the newly joining port will trigger a replay of
objects on all bridge ports and on the bridge itself.

This behavior leads to errors in dpaa2_switch_port_vlans_add() when a
VLAN gets installed on the same interface multiple times.

The intended mechanism to address this is to pass a non-NULL ctx to the
switchdev_bridge_port_offload() helper and then check it against the
port's private structure. But since the driver does not have any use for
the replayed port objects and FDBs until it gains support for LAG
offload, it's better to fix the issue by reverting the dpaa2-switch
driver to not ask for replay. The pointers will be added back when we
are prepared to ignore replays on unrelated ports.

Fixes: b28d580e2939 ("net: bridge: switchdev: replay all VLAN groups")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20231212164326.2753457-3-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dpaa2-switch: fix size of the dma_unmap

[ Upstream commit 2aad7d4189a923b24efa8ea6ad09059882b1bfe4 ]

The size of the DMA unmap was wrongly put as a sizeof of a pointer.
Change the value of the DMA unmap to be the actual macro used for the
allocation and the DMA map.

Fixes: 1110318d83e8 ("dpaa2-switch: add tc flower hardware offload on ingress traffic")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20231212164326.2753457-2-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space()

[ Upstream commit 60316d7f10b17a7ebb1ead0642fee8710e1560e0 ]

We need to do signed arithmetic if we expect condition
`if (bytes < 0)` to be possible

Found by Linux Verification Center (linuxtesting.org) with SVACE

Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231211162317.4116625-1-kniv@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sign-file: Fix incorrect return values check

[ Upstream commit 829649443e78d85db0cff0c37cadb28fbb1a5f6f ]

There are some wrong return values check in sign-file when call OpenSSL
API. The ERR() check cond is wrong because of the program only check the
return value is < 0 which ignored the return val is 0. For example:
1. CMS_final() return 1 for success or 0 for failure.
2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure.
3. i2d_TYPEbio() return 1 for success and 0 for failure.
4. BIO_free() return 1 for success and 0 for failure.

Link: https://www.openssl.org/docs/manmaster/man3/
Fixes: e5a2e3c84782 ("scripts/sign-file.c: Add support for signing with a raw signature")
Signed-off-by: Yusong Gao <a869920004@gmail.com>
Reviewed-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20231213024405.624692-1-a869920004@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

stmmac: dwmac-loongson: Make sure MDIO is initialized before use

[ Upstream commit e87d3a1370ce9f04770d789bcf7cce44865d2e8d ]

Generic code will use mdio. If it is not initialized before use,
the kernel will Oops.

Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Fix XDP redirection error

[ Upstream commit 4ab138ca0a340e6d6e7a6a9bd5004bd8f83127ca ]

When sending TX packets, the meta descriptor can be all zeroes
as no meta information is required (as in XDP).

This patch removes the validity check, as when
`disable_meta_caching` is enabled, such TX packets will be
dropped otherwise.

Fixes: 0e3a3f6dacf0 ("net: ena: support new LLQ acceleration mode")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-5-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Fix DMA syncing in XDP path when SWIOTLB is on

[ Upstream commit d760117060cf2e90b5c59c5492cab179a4dbce01 ]

This patch fixes two issues:

Issue 1
-------
Description
```````````
Current code does not call dma_sync_single_for_cpu() to sync data from
the device side memory to the CPU side memory before the XDP code path
uses the CPU side data.
This causes the XDP code path to read the unset garbage data in the CPU
side memory, resulting in incorrect handling of the packet by XDP.

Solution
````````
1. Add a call to dma_sync_single_for_cpu() before the XDP code starts to
   use the data in the CPU side memory.
2. The XDP code verdict can be XDP_PASS, in which case there is a
   fallback to the non-XDP code, which also calls
   dma_sync_single_for_cpu().
   To avoid calling dma_sync_single_for_cpu() twice:
2.1. Put the dma_sync_single_for_cpu() in the code in such a place where
     it happens before XDP and non-XDP code.
2.2. Remove the calls to dma_sync_single_for_cpu() in the non-XDP code
     for the first buffer only (rx_copybreak and non-rx_copybreak
     cases), since the new call that was added covers these cases.
     The call to dma_sync_single_for_cpu() for the second buffer and on
     stays because only the first buffer is handled by the newly added
     dma_sync_single_for_cpu(). And there is no need for special
     handling of the second buffer and on for the XDP path since
     currently the driver supports only single buffer packets.

Issue 2
-------
Description
```````````
In case the XDP code forwarded the packet (ENA_XDP_FORWARDED),
ena_unmap_rx_buff_attrs() is called with attrs set to 0.
This means that before unmapping the buffer, the internal function
dma_unmap_page_attrs() will also call dma_sync_single_for_cpu() on
the whole buffer (not only on the data part of it).
This sync is both wasteful (since a sync was already explicitly
called before) and also causes a bug, which will be explained
using the below diagram.

The following diagram shows the flow of events causing the bug.
The order of events is (1)-(4) as shown in the diagram.

CPU side memory area

     (3)convert_to_xdp_frame() initializes the
        headroom with xdpf metadata
                      ||
                      \/
          ___________________________________
         |                                   |
 0       |                                   V                       4K
 ---------------------------------------------------------------------
 | xdpf->data      | other xdpf       |   < data >   | tailroom ||...|
 |                 | fields           |              | GARBAGE  ||   |
 ---------------------------------------------------------------------

                   /\                        /\
                   ||                        ||
   (4)ena_unmap_rx_buff_attrs() calls     (2)dma_sync_single_for_cpu()
      dma_sync_single_for_cpu() on the       copies data from device
      whole buffer page, overwriting         side to CPU side memory
      the xdpf->data with GARBAGE.           ||
 0                                                                   4K
 ---------------------------------------------------------------------
 | headroom                           |   < data >   | tailroom ||...|
 | GARBAGE                            |              | GARBAGE  ||   |
 ---------------------------------------------------------------------

Device side memory area                      /\
                                             ||
                               (1) device writes RX packet data

After the call to ena_unmap_rx_buff_attrs() in (4), the xdpf->data
becomes corrupted, and so when it is later accessed in
ena_clean_xdp_irq()->xdp_return_frame(), it causes a page fault,
crashing the kernel.

Solution
````````
Explicitly tell ena_unmap_rx_buff_attrs() not to call
dma_sync_single_for_cpu() by passing it the ENA_DMA_ATTR_SKIP_CPU_SYNC
flag.

Fixes: f7d625adeb7b ("net: ena: Add dynamic recycling mechanism for rx buffers")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-4-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Fix xdp drops handling due to multibuf packets

[ Upstream commit 505b1a88d311ff6f8c44a34f94e3be21745cce6f ]

Current xdp code drops packets larger than ENA_XDP_MAX_MTU.
This is an incorrect condition since the problem is not the
size of the packet, rather the number of buffers it contains.

This commit:

1. Identifies and drops XDP multi-buffer packets at the
   beginning of the function.
2. Increases the xdp drop statistic when this drop occurs.
3. Adds a one-time print that such drops are happening to
   give better indication to the user.

Fixes: 838c93dc5449 ("net: ena: implement XDP drop support")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-3-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Destroy correct number of xdp queues upon failure

[ Upstream commit 41db6f99b5489a0d2ef26afe816ef0c6118d1d47 ]

The ena_setup_and_create_all_xdp_queues() function freed all the
resources upon failure, after creating only xdp_num_queues queues,
instead of freeing just the created ones.

In this patch, the only resources that are freed, are the ones
allocated right before the failure occurs.

Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shahar Itzko <itzko@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-2-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Remove acked SYN flag from packet in the transmit queue correctly

[ Upstream commit f99cd56230f56c8b6b33713c5be4da5d6766be1f ]

syzkaller report:

 kernel BUG at net/core/skbuff.c:3452!
 invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.7.0-rc4-00009-gbee0e7762ad2-dirty #135
 RIP: 0010:skb_copy_and_csum_bits (net/core/skbuff.c:3452)
 Call Trace:
 icmp_glue_bits (net/ipv4/icmp.c:357)
 __ip_append_data.isra.0 (net/ipv4/ip_output.c:1165)
 ip_append_data (net/ipv4/ip_output.c:1362 net/ipv4/ip_output.c:1341)
 icmp_push_reply (net/ipv4/icmp.c:370)
 __icmp_send (./include/net/route.h:252 net/ipv4/icmp.c:772)
 ip_fragment.constprop.0 (./include/linux/skbuff.h:1234 net/ipv4/ip_output.c:592 net/ipv4/ip_output.c:577)
 __ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:295)
 ip_output (net/ipv4/ip_output.c:427)
 __ip_queue_xmit (net/ipv4/ip_output.c:535)
 __tcp_transmit_skb (net/ipv4/tcp_output.c:1462)
 __tcp_retransmit_skb (net/ipv4/tcp_output.c:3387)
 tcp_retransmit_skb (net/ipv4/tcp_output.c:3404)
 tcp_retransmit_timer (net/ipv4/tcp_timer.c:604)
 tcp_write_timer (./include/linux/spinlock.h:391 net/ipv4/tcp_timer.c:716)

The panic issue was trigered by tcp simultaneous initiation.
The initiation process is as follows:

      TCP A                                            TCP B

  1.  CLOSED                                           CLOSED

  2.  SYN-SENT     --> <SEQ=100><CTL=SYN>              ...

  3.  SYN-RECEIVED <-- <SEQ=300><CTL=SYN>              <-- SYN-SENT

  4.               ... <SEQ=100><CTL=SYN>              --> SYN-RECEIVED

  5.  SYN-RECEIVED --> <SEQ=100><ACK=301><CTL=SYN,ACK> ...

  // TCP B: not send challenge ack for ack limit or packet loss
  // TCP A: close
tcp_close
   tcp_send_fin
              if (!tskb && tcp_under_memory_pressure(sk))
                  tskb = skb_rb_last(&sk->tcp_rtx_queue); //pick SYN_ACK packet
           TCP_SKB_CB(tskb)->tcp_flags |= TCPHDR_FIN;  // set FIN flag

  6.  FIN_WAIT_1  --> <SEQ=100><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ...

  // TCP B: send challenge ack to SYN_FIN_ACK

  7.               ... <SEQ=301><ACK=101><CTL=ACK>   <-- SYN-RECEIVED //challenge ack

  // TCP A:  <SND.UNA=101>

  8.  FIN_WAIT_1 --> <SEQ=101><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ... // retransmit panic

__tcp_retransmit_skb  //skb->len=0
    tcp_trim_head
len = tp->snd_una - TCP_SKB_CB(skb)->seq // len=101-100
    __pskb_trim_head
skb->data_len -= len // skb->len=-1, wrap around
    ... ...
    ip_fragment
icmp_glue_bits //BUG_ON

If we use tcp_trim_head() to remove acked SYN from packet that contains data
or other flags, skb->len will be incorrectly decremented. We can remove SYN
flag that has been acked from rtx_queue earlier than tcp_trim_head(), which
can fix the problem mentioned above.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Co-developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Link: https://lore.kernel.org/r/20231210020200.1539875-1-dongchenchen2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix a potential use-after-free in qed_cxt_tables_alloc

[ Upstream commit b65d52ac9c085c0c52dee012a210d4e2f352611b ]

qed_ilt_shadow_alloc() will call qed_ilt_shadow_free() to
free p_hwfn->p_cxt_mngr->ilt_shadow on error. However,
qed_cxt_tables_alloc() accesses the freed pointer on failure
of qed_ilt_shadow_alloc() through calling qed_cxt_mngr_free(),
which may lead to use-after-free. Fix this issue by setting
p_mngr->ilt_shadow to NULL in qed_ilt_shadow_free().

Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20231210045255.21383-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix iavf_shutdown to call iavf_remove instead iavf_close

[ Upstream commit 7ae42ef308ed0f6250b36f43e4eeb182ebbe6215 ]

Make the flow for pci shutdown be the same to the pci remove.

iavf_shutdown was implementing an incomplete version
of iavf_remove. It misses several calls to the kernel like
iavf_free_misc_irq, iavf_reset_interrupt_capability, iounmap
that might break the system on reboot or hibernation.

Implement the call of iavf_remove directly in iavf_shutdown to
close this gap.

Fixes below error messages (dmesg) during shutdown stress tests -
[685814.900917] ice 0000:88:00.0: MAC 02:d0:5f:82:43:5d does not exist for
 VF 0
[685814.900928] ice 0000:88:00.0: MAC 33:33:00:00:00:01 does not exist for
VF 0

Reproduction:

1. Create one VF interface:
echo 1 > /sys/class/net/<interface_name>/device/sriov_numvfs

2. Run live dmesg on the host:
dmesg -wH

3. On SUT, script below steps into vf_namespace_assignment.sh

<#!/bin/sh> // Remove <>. Git removes # line
if=<VF name> (edit this per VF name)
loop=0

while true; do

echo test round $loop
let loop++

ip netns add ns$loop
ip link set dev $if up
ip link set dev $if netns ns$loop
ip netns exec ns$loop ip link set dev $if up
ip netns exec ns$loop ip link set dev $if netns 1
ip netns delete ns$loop

done

4. Run the script for at least 1000 iterations on SUT:
./vf_namespace_assignment.sh

Expected result:
No errors in dmesg.

Fixes: 129cf89e5856 ("iavf: rename functions and structs to new name")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Co-developed-by: Ranganatha Rao <ranganatha.rao@intel.com>
Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Handle ntuple on/off based on new state machines for flow director

[ Upstream commit 09d23b8918f9ab0f8114f6b94f2faf8bde3fb52a ]

ntuple-filter feature on/off:
Default is on. If turned off, the filters will be removed from both
PF and iavf list. The removal is irrespective of current filter state.

Steps to reproduce:
-------------------

1. Ensure ntuple is on.

ethtool -K enp8s0 ntuple-filters on

2. Create a filter to receive the traffic into non-default rx-queue like 15
and ensure traffic is flowing into queue into 15.
Now, turn off ntuple. Traffic should not flow to configured queue 15.
It should flow to default RX queue.

Fixes: 0dbfbabb840d ("iavf: Add framework to enable ethtool ntuple filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Introduce new state machines for flow director

[ Upstream commit 3a0b5a2929fdeda63fc921c2dbed237059acf732 ]

New states introduced:

 IAVF_FDIR_FLTR_DIS_REQUEST
 IAVF_FDIR_FLTR_DIS_PENDING
 IAVF_FDIR_FLTR_INACTIVE

Current FDIR state machines (SM) are not adequate to handle a few
scenarios in the link DOWN/UP event, reset event and ntuple-feature.

For example, when VF link goes DOWN and comes back UP administratively,
the expectation is that previously installed filters should also be
restored. But with current SM, filters are not restored.
So with new SM, during link DOWN filters are marked as INACTIVE in
the iavf list but removed from PF. After link UP, SM will transition
from INACTIVE to ADD_REQUEST to restore the filter.

Similarly, with VF reset, filters will be removed from the PF, but
marked as INACTIVE in the iavf list. Filters will be restored after
reset completion.

Steps to reproduce:
-------------------

1. Create a VF. Here VF is enp8s0.

2. Assign IP addresses to VF and link partner and ping continuously
from remote. Here remote IP is 1.1.1.1.

3. Check default RX Queue of traffic.

ethtool -S enp8s0 | grep -E "rx-[[:digit:]]+\.packets"

4. Add filter - change default RX Queue (to 15 here)

ethtool -U ens8s0 flow-type ip4 src-ip 1.1.1.1 action 15 loc 5

5. Ensure filter gets added and traffic is received on RX queue 15 now.

Link event testing:
-------------------
6. Bring VF link down and up. If traffic flows to configured queue 15,
test is success, otherwise it is a failure.

Reset event testing:
--------------------
7. Reset the VF. If traffic flows to configured queue 15, test is success,
otherwise it is a failure.

Fixes: 0dbfbabb840d ("iavf: Add framework to enable ethtool ntuple filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/rose: Fix Use-After-Free in rose_ioctl

[ Upstream commit 810c38a369a0a0ce625b5c12169abce1dd9ccd53 ]

Because rose_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with rose_accept().
A use-after-free for skb occurs with the following flow.
```
rose_ioctl() -> skb_peek()
rose_accept() -> skb_dequeue() -> kfree_skb()
```
Add sk->sk_receive_queue.lock to rose_ioctl() to fix this issue.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231209100538.GA407321@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

atm: Fix Use-After-Free in do_vcc_ioctl

[ Upstream commit 24e90b9e34f9e039f56b5f25f6e6eb92cdd8f4b3 ]

Because do_vcc_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with vcc_recvmsg().
A use-after-free for skb occurs with the following flow.
```
do_vcc_ioctl() -> skb_peek()
vcc_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
```
Add sk->sk_receive_queue.lock to do_vcc_ioctl() to fix this issue.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231209094210.GA403126@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Fix pause frame configuration

[ Upstream commit e307b5a845c5951dabafc48d00b6424ee64716c4 ]

The current implementation's default Pause Forward setting is causing
unnecessary network traffic. This patch disables Pause Forward to
address this issue.

Fixes: 1121f6b02e7a ("octeontx2-af: Priority flow control configuration support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Update RSS algorithm index

[ Upstream commit 570ba37898ecd9069beb58bf0b6cf84daba6e0fe ]

The RSS flow algorithm is not set up correctly for promiscuous or all
multi MCAM entries. This has an impact on flow distribution.

This patch fixes the issue by updating flow algorithm index in above
mentioned MCAM entries.

Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: Fix promisc mcam entry action

[ Upstream commit dbda436824ded8ef6a05bb82cd9baa8d42377a49 ]

Current implementation is such that, promisc mcam entry action
is set as multicast even when there are no trusted VFs. multicast
action causes the hardware to copy packet data, which reduces
the performance.

This patch fixes this issue by setting the promisc mcam entry action to
unicast instead of multicast when there are no trusted VFs. The same
change is made for the 'allmulti' mcam entry action.

Fixes: ffd2f89ad05c ("octeontx2-pf: Enable promisc/allmulti match MCAM entries.")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeon_ep: explicitly test for firmware ready value

[ Upstream commit 284f717622417cb267e344a9174f8e5698d1e3c1 ]

The firmware ready value is 1, and get firmware ready status
function should explicitly test for that value. The firmware
ready value read will be 2 after driver load, and on unbind
till firmware rewrites the firmware ready back to 0, the value
seen by driver will be 2, which should be regarded as not ready.

Fixes: 10c073e40469 ("octeon_ep: defer probe if firmware not ready")
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: act_ct: Take per-cb reference to tcf_ct_flow_table

[ Upstream commit 125f1c7f26ffcdbf96177abe75b70c1a6ceb17bc ]

The referenced change added custom cleanup code to act_ct to delete any
callbacks registered on the parent block when deleting the
tcf_ct_flow_table instance. However, the underlying issue is that the
drivers don't obtain the reference to the tcf_ct_flow_table instance when
registering callbacks which means that not only driver callbacks may still
be on the table when deleting it but also that the driver can still have
pointers to its internal nf_flowtable and can use it concurrently which
results either warning in netfilter[0] or use-after-free.

Fix the issue by taking a reference to the underlying struct
tcf_ct_flow_table instance when registering the callback and release the
reference when unregistering. Expose new API required for such reference
counting by adding two new callbacks to nf_flowtable_type and implementing
them for act_ct flowtable_ct type. This fixes the issue by extending the
lifetime of nf_flowtable until all users have unregistered.

[0]:
[106170.938634] ------------[ cut here ]------------
[106170.939111] WARNING: CPU: 21 PID: 3688 at include/net/netfilter/nf_flow_table.h:262 mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core]
[106170.940108] Modules linked in: act_ct nf_flow_table act_mirred act_skbedit act_tunnel_key vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa bonding openvswitch nsh rpcrdma rdma_ucm
ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_regis
try overlay mlx5_core
[106170.943496] CPU: 21 PID: 3688 Comm: kworker/u48:0 Not tainted 6.6.0-rc7_for_upstream_min_debug_2023_11_01_13_02 #1
[106170.944361] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[106170.945292] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core]
[106170.945846] RIP: 0010:mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core]
[106170.946413] Code: 89 ef 48 83 05 71 a4 14 00 01 e8 f4 06 04 e1 48 83 05 6c a4 14 00 01 48 83 c4 28 5b 5d 41 5c 41 5d c3 48 83 05 d1 8b 14 00 01 <0f> 0b 48 83 05 d7 8b 14 00 01 e9 96 fe ff ff 48 83 05 a2 90 14 00
[106170.947924] RSP: 0018:ffff88813ff0fcb8 EFLAGS: 00010202
[106170.948397] RAX: 0000000000000000 RBX: ffff88811eabac40 RCX: ffff88811eabad48
[106170.949040] RDX: ffff88811eab8000 RSI: ffffffffa02cd560 RDI: 0000000000000000
[106170.949679] RBP: ffff88811eab8000 R08: 0000000000000001 R09: ffffffffa0229700
[106170.950317] R10: ffff888103538fc0 R11: 0000000000000001 R12: ffff88811eabad58
[106170.950969] R13: ffff888110c01c00 R14: ffff888106b40000 R15: 0000000000000000
[106170.951616] FS:  0000000000000000(0000) GS:ffff88885fd40000(0000) knlGS:0000000000000000
[106170.952329] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[106170.952834] CR2: 00007f1cefd28cb0 CR3: 000000012181b006 CR4: 0000000000370ea0
[106170.953482] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[106170.954121] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[106170.954766] Call Trace:
[106170.955057]  <TASK>
[106170.955315]  ? __warn+0x79/0x120
[106170.955648]  ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core]
[106170.956172]  ? report_bug+0x17c/0x190
[106170.956537]  ? handle_bug+0x3c/0x60
[106170.956891]  ? exc_invalid_op+0x14/0x70
[106170.957264]  ? asm_exc_invalid_op+0x16/0x20
[106170.957666]  ? mlx5_del_flow_rules+0x10/0x310 [mlx5_core]
[106170.958172]  ? mlx5_tc_ct_block_flow_offload_add+0x1240/0x1240 [mlx5_core]
[106170.958788]  ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core]
[106170.959339]  ? mlx5_tc_ct_del_ft_cb+0xc6/0x2b0 [mlx5_core]
[106170.959854]  ? mapping_remove+0x154/0x1d0 [mlx5_core]
[106170.960342]  ? mlx5e_tc_action_miss_mapping_put+0x4f/0x80 [mlx5_core]
[106170.960927]  mlx5_tc_ct_delete_flow+0x76/0xc0 [mlx5_core]
[106170.961441]  mlx5_free_flow_attr_actions+0x13b/0x220 [mlx5_core]
[106170.962001]  mlx5e_tc_del_fdb_flow+0x22c/0x3b0 [mlx5_core]
[106170.962524]  mlx5e_tc_del_flow+0x95/0x3c0 [mlx5_core]
[106170.963034]  mlx5e_flow_put+0x73/0xe0 [mlx5_core]
[106170.963506]  mlx5e_put_flow_list+0x38/0x70 [mlx5_core]
[106170.964002]  mlx5e_rep_update_flows+0xec/0x290 [mlx5_core]
[106170.964525]  mlx5e_rep_neigh_update+0x1da/0x310 [mlx5_core]
[106170.965056]  process_one_work+0x13a/0x2c0
[106170.965443]  worker_thread+0x2e5/0x3f0
[106170.965808]  ? rescuer_thread+0x410/0x410
[106170.966192]  kthread+0xc6/0xf0
[106170.966515]  ? kthread_complete_and_exit+0x20/0x20
[106170.966970]  ret_from_fork+0x2d/0x50
[106170.967332]  ? kthread_complete_and_exit+0x20/0x20
[106170.967774]  ret_from_fork_asm+0x11/0x20
[106170.970466]  </TASK>
[106170.970726] ---[ end trace 0000000000000000 ]---

Fixes: 77ac5e40c44e ("net/sched: act_ct: remove and free nf_table callbacks")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>