David Daney [Tue, 23 Sep 2008 07:09:51 +0000 (00:09 -0700)]
MIPS: Scheduler support for HARDWARE_WATCHPOINTS.
Here we hook up the scheduler. Whenever we switch to a new process,
we check to see if the watch registers should be installed, and do it
if needed.
Signed-off-by: David Daney <ddaney@avtrex.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Tue, 23 Sep 2008 07:08:45 +0000 (00:08 -0700)]
MIPS: Watch exception handling for HARDWARE_WATCHPOINTS.
Here we hook up the watch exception handler so that it sends SIGTRAP when
the hardware watch registers are triggered.
Signed-off-by: David Daney <ddaney@avtrex.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Tue, 23 Sep 2008 07:07:16 +0000 (00:07 -0700)]
MIPS: Probe watch registers and report configuration.
Probe for watch register characteristics, and report them in /proc/cpuinfo.
Signed-off-by: David Daney <ddaney@avtrex.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Tue, 23 Sep 2008 07:05:54 +0000 (00:05 -0700)]
MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.
This is the main support code for the patch. Here we just add the
code, the following patches hook it up.
Signed-off-by: David Daney <ddaney@avtrex.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
create mode 100644 arch/mips/include/asm/watch.h
create mode 100644 arch/mips/kernel/watch.c
David Daney [Tue, 23 Sep 2008 07:04:26 +0000 (00:04 -0700)]
MIPS: Add HARDWARE_WATCHPOINTS configure option.
This is automatically set for all MIPS32 and MIPS64 processors.
Signed-off-by: David Daney <ddaney@avtrex.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Tue, 31 Oct 2006 02:52:56 +0000 (02:52 +0000)]
MIPS: Replace use of <asm-generic/uaccess.h> with native implementations.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Wed, 17 Sep 2008 15:13:58 +0000 (00:13 +0900)]
MIPS: TXx9: Add TX4939 ATA support (v2)
Add a helper routine to register tx4939ide driver and use it on
RBTX4939 board.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Thu, 28 Aug 2008 14:17:49 +0000 (15:17 +0100)]
MIPS: Rewrite spinlocks to ticket locks.
Based on patch by Chad Reese of Cavium Networks.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Sat, 11 Oct 2008 15:18:53 +0000 (16:18 +0100)]
MIPS: IP checksums: Optimize adjust of sum on buffers of odd alignment.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Sat, 11 Oct 2008 15:18:53 +0000 (16:18 +0100)]
MIPS: IP checksums: Remove unncessary .set pseudos
They possibly silence meaningful warnings ...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Sat, 11 Oct 2008 15:18:53 +0000 (16:18 +0100)]
MIPS: IP checksums: Remove unncessary folding of sum to 16 bit.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Tue, 16 Sep 2008 17:48:51 +0000 (19:48 +0200)]
MIPS: Move headfiles to new location below arch/mips/include
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Tue, 16 Sep 2008 17:12:16 +0000 (19:12 +0200)]
MIPS: Alchemy: rename directory
It's more than the au1000 these days.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Sat, 11 Oct 2008 15:18:50 +0000 (16:18 +0100)]
MIPS: Optimize get_user and put_user for 64-bit
A long for the error value leads to unnecessary sign extensions. This
patch shrinks an ip27_defconfig kernel build with gcc 4.3.0 by 2256 bytes.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Mon, 1 Sep 2008 13:22:41 +0000 (22:22 +0900)]
MIPS: TXx9: Implement prom_free_prom_memory
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Mon, 1 Sep 2008 13:22:40 +0000 (22:22 +0900)]
MIPS: TXx9: Add RBTX4939 board support
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
create mode 100644 arch/mips/txx9/rbtx4939/Makefile
create mode 100644 arch/mips/txx9/rbtx4939/irq.c
create mode 100644 arch/mips/txx9/rbtx4939/prom.c
create mode 100644 arch/mips/txx9/rbtx4939/setup.c
create mode 100644 include/asm-mips/txx9/rbtx4939.h
Atsushi Nemoto [Mon, 1 Sep 2008 13:22:39 +0000 (22:22 +0900)]
MIPS: TXx9: Add TX4939 SoC support
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
create mode 100644 arch/mips/pci/pci-tx4939.c
create mode 100644 arch/mips/txx9/generic/irq_tx4939.c
create mode 100644 arch/mips/txx9/generic/setup_tx4939.c
create mode 100644 include/asm-mips/txx9/tx4939.h
Atsushi Nemoto [Mon, 1 Sep 2008 13:22:38 +0000 (22:22 +0900)]
MIPS: TXx9: IOC LED support
Add leds-gpio platform device for controlling LEDs connected to IOC on
RBTX49XX and JMR3927 board.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Mon, 1 Sep 2008 13:22:37 +0000 (22:22 +0900)]
MIPS: TXx9: Microoptimize interrupt handlers
The IOC interrupt status register on RBTX49XX only have 8 bits. Use
8-bit version of __fls() to optimize interrupt handlers.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Mon, 1 Sep 2008 13:22:36 +0000 (22:22 +0900)]
MIPS: TXx9: stop_unused_modules
TXx9 SoCs have pin multiplex. Stop some controller modules which can
not be used due to pin configurations.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Sat, 23 Aug 2008 16:54:37 +0000 (18:54 +0200)]
Documentation: Document the RB532 specific kmac tag
The Routerboard 532 bootloader passes the korina ethernet
MAC adapter address to the kernel on the command line.
Document this in the kernel-parameters file.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Sat, 23 Aug 2008 16:54:34 +0000 (18:54 +0200)]
MIPS: RB532: Convert to GPIO lib
This patch converts the rb532 code to use gpio library
and register its gpio chip.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Sat, 23 Aug 2008 16:54:04 +0000 (18:54 +0200)]
MIPS: RB532: Remove unused rc32434_sync_delay and rc32434_sync_udelay
This patch removes these two unused functions :
rc32434_sync_delay and rc32434_sync_udelay
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Sat, 23 Aug 2008 16:53:50 +0000 (18:53 +0200)]
MIPS: RB532: Cleanup the headers again
This patch cleans up headers and regroups informations to
where they should reside. While moving, try to have a
consistant naming for defines.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Sat, 23 Aug 2008 16:53:24 +0000 (18:53 +0200)]
MIPS: RB532: Remove obsolute reference to setup_serial_port
We are no longer using setup_serial_port. So just remove it
from the prom code.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Fri, 22 Aug 2008 15:03:03 +0000 (17:03 +0200)]
MIPS: RB532: Fix id usage in platform devices
When there is only platform device of the same type, id = -1
should be used, fix this.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Fri, 22 Aug 2008 15:02:03 +0000 (17:02 +0200)]
MIPS: RB532: replace raw volatile read with a readl
This patch replaces a raw read using volatiles
with a readl.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Fri, 22 Aug 2008 15:01:31 +0000 (17:01 +0200)]
MIPS: RB532: Remove gpio bootup state
We are no longer using gpio bootup state, so do not export
it and do not parse the kernel command line tag for it.
Instead we provide gpio-keys for the button the gpio bootup
state was checking.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Fri, 22 Aug 2008 15:01:03 +0000 (17:01 +0200)]
MIPS: RB532: Use physical addresses for gpio and device controller registers
This patch fixes the misuse of virtual addresses for the GPIO and third
device controller which would lead to problems while accessing ioremap'd
registers.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Fri, 22 Aug 2008 15:00:22 +0000 (17:00 +0200)]
MIPS: RB532: Cleanup and group definitions to their right places
This patch moves GPIO related definitions to gpio.h and IRQ
related to irq.h
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Tue, 19 Aug 2008 13:55:18 +0000 (22:55 +0900)]
MIPS: TXx9: Declare smsc_fdc37m81x_config_get() in smsc_fdc37m81x.h
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Tue, 19 Aug 2008 13:55:17 +0000 (22:55 +0900)]
MIPS: TXx9: Add __init tag for tx4938_pcic1_map_irq.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Tue, 19 Aug 2008 13:55:16 +0000 (22:55 +0900)]
MIPS: TXx9: Add board_be_init for TX4927/TX4938
Setup default board_be_handler for TX4927/TX4938.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Tue, 19 Aug 2008 13:55:15 +0000 (22:55 +0900)]
MIPS: TXx9: Default machine_restart using watchdog reset
Add default machine_restart routine using watchdog reset of TX4927 and
TX4938.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Tue, 19 Aug 2008 13:55:14 +0000 (22:55 +0900)]
MIPS: TXx9: Make spi_eeprom.c more generic
Helper routines in txx9/rbtx4938/spi_eeprom.c is not TX4938 specific.
Move it to txx9/generic/ directory and make it works with SPI bus
number other than 0.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
create mode 100644 arch/mips/txx9/generic/spi_eeprom.c
delete mode 100644 arch/mips/txx9/rbtx4938/spi_eeprom.c
Atsushi Nemoto [Tue, 19 Aug 2008 13:55:13 +0000 (22:55 +0900)]
MIPS: RBTX4938: Add TOSHIBA_RBTX4938_MPLEX_KEEP
Add TOSHIBA_RBTX4938_MPLEX_KEEP to keep MPLEX settings by firmware.
Also replace some printk with pr_info.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Tue, 19 Aug 2008 13:55:12 +0000 (22:55 +0900)]
MIPS: TXx9: Raise priority of interrupts for errors, timers, SIO
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Tue, 19 Aug 2008 13:55:11 +0000 (22:55 +0900)]
MIPS: TXx9: Add mtd support
Add helper routines to register physmap-flash platform devices for NOR
flashes.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Tue, 19 Aug 2008 13:55:10 +0000 (22:55 +0900)]
MIPS: TXx9: Runtime configuration of timeout-error
Add kernel options to control bus timeout error.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Tue, 19 Aug 2008 13:55:09 +0000 (22:55 +0900)]
MIPS: TXx9: Cache fixup
TX39/TX49 can enable/disable I/D cache at runtime. Add kernel options
to control them. This is useful to debug some cache-related issues,
such as aliasing or I/D coherency. Also enable CWF bit for TX49 SoCs.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Tue, 19 Aug 2008 13:55:08 +0000 (22:55 +0900)]
MIPS: TXx9: Early command-line preprocessing
* Select board by command-line option or firmware environment variable.
* Handle "masterclk=" option.
* Add boards.h to centerize board_vec declaration.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
create mode 100644 include/asm-mips/txx9/boards.h
Atsushi Nemoto [Tue, 19 Aug 2008 13:55:07 +0000 (22:55 +0900)]
MIPS: TXx9: Add prom_getenv
Add prom_getenv() which can be used for YAMON. This assumes other
firmware should pass NULL for fw_arg2.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Tue, 19 Aug 2008 13:55:06 +0000 (22:55 +0900)]
MIPS: TXx9: Improve handling of built-in and command-line args
* Make prom_init_cmdline() static and be called from prom_init.
* Append built-in args if the first character was '+'.
* Drop command-line args if the first character of built-in was '-'.
* Enclose args include spaces by quotes.
* TX4938_NAND_BOOT is no longer needed.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Tue, 19 Aug 2008 13:55:05 +0000 (22:55 +0900)]
MIPS: RBTX4927: More explicit initialization
* Make sure all interrupts cleared on startup
* Initialize some GPIOs
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patrick Glass [Mon, 18 Aug 2008 21:41:30 +0000 (14:41 -0700)]
MIPS: PMC MSP71XX gpio drivers
This new gpio driver for PMC-Sierra's MSP71xx SoC allows
standard api calls for access to the general and extended
gpio's.
Signed-off-by: Patrick Glass <patrickglass@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio.c
create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio_extended.c
create mode 100755 include/asm-mips/pmc-sierra/msp71xx/gpio.h
Thomas Bogendoerfer [Sun, 17 Aug 2008 14:49:25 +0000 (16:49 +0200)]
MIPS: Use compat_sys_ptrace
This replaces mips's sys_ptrace32 with a compat_arch_ptrace and
enables the new generic definition of compat_sys_ptrace instead.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Linus Torvalds [Fri, 10 Oct 2008 20:10:51 +0000 (13:10 -0700)]
Merge branch 'rcu-v28-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'rcu-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (21 commits)
rcu: RCU-based detection of stalled CPUs for Classic RCU, fix
rcu: RCU-based detection of stalled CPUs for Classic RCU
rcu: add rcu_read_lock_sched() / rcu_read_unlock_sched()
rcu: fix sparse shadowed variable warning
doc/RCU: fix pseudocode in rcuref.txt
rcuclassic: fix compiler warning
rcu: use irq-safe locks
rcuclassic: fix compilation NG
rcu: fix locking cleanup fallout
rcu: remove redundant ACCESS_ONCE definition from rcupreempt.c
rcu: fix classic RCU locking cleanup lockdep problem
rcu: trace fix possible mem-leak
rcu: just rename call_rcu_bh instead of making it a macro
rcu: remove list_for_each_rcu()
rcu: fixes to include/linux/rcupreempt.h
rcu: classic RCU locking and memory-barrier cleanups
rcu: prevent console flood when one CPU sees another AWOL via RCU
rcu, debug: detect stalled grace periods, cleanups
rcu, debug: detect stalled grace periods
rcu classic: new algorithm for callbacks-processing(v2)
...
Linus Torvalds [Fri, 10 Oct 2008 19:44:43 +0000 (12:44 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
selinux: Fix an uninitialized variable BUG/panic in selinux_secattr_to_sid()
selinux: use default proc sid on symlinks
file capabilities: uninline cap_safe_nice
Update selinux info in MAINTAINERS and Kconfig help text
SELinux: add gitignore file for mdp script
SELinux: add boundary support and thread context assignment
securityfs: do not depend on CONFIG_SECURITY
selinux: add support for installing a dummy policy (v2)
security: add/fix security kernel-doc
selinux: Unify for- and while-loop style
selinux: conditional expression type validation was off-by-one
smack: limit privilege by label
SELinux: Fix a potentially uninitialised variable in SELinux hooks
SELinux: trivial, remove unneeded local variable
SELinux: Trivial minor fixes that change C null character style
make selinux_write_opts() static
Linus Torvalds [Fri, 10 Oct 2008 19:42:31 +0000 (12:42 -0700)]
Merge branch 'sched-v28-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'sched-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits)
sched debug: add name to sched_domain sysctl entries
sched: sync wakeups vs avg_overlap
sched: remove redundant code in cpu_cgroup_create()
sched_rt.c: resch needed in rt_rq_enqueue() for the root rt_rq
cpusets: scan_for_empty_cpusets(), cpuset doesn't seem to be so const
sched: minor optimizations in wake_affine and select_task_rq_fair
sched: maintain only task entities in cfs_rq->tasks list
sched: fixup buddy selection
sched: more sanity checks on the bandwidth settings
sched: add some comments to the bandwidth code
sched: fixlet for group load balance
sched: rework wakeup preemption
CFS scheduler: documentation about scheduling policies
sched: clarify ifdef tangle
sched: fix list traversal to use _rcu variant
sched: turn off WAKEUP_OVERLAP
sched: wakeup preempt when small overlap
kernel/cpu.c: create a CPU_STARTING cpu_chain notifier
kernel/cpu.c: Move the CPU_DYING notifiers
sched: fix __load_balance_iterator() for cfq with only one task
...
Linus Torvalds [Fri, 10 Oct 2008 18:20:42 +0000 (11:20 -0700)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: skcipher - Use RNG interface instead of get_random_bytes
crypto: rng - RNG interface and implementation
crypto: api - Add fips_enable flag
crypto: skcipher - Move IV generators into their own modules
crypto: cryptomgr - Test ciphers using ECB
crypto: api - Use test infrastructure
crypto: cryptomgr - Add test infrastructure
crypto: tcrypt - Add alg_test interface
crypto: tcrypt - Abort and only log if there is an error
crypto: crc32c - Use Intel CRC32 instruction
crypto: tcrypt - Avoid using contiguous pages
crypto: api - Display larval objects properly
crypto: api - Export crypto_alg_lookup instead of __crypto_alg_lookup
crypto: Kconfig - Replace leading spaces with tabs
Linus Torvalds [Fri, 10 Oct 2008 18:16:33 +0000 (11:16 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (29 commits)
RDMA/nes: Fix slab corruption
IB/mlx4: Set RLKEY bit for kernel QPs
RDMA/nes: Correct error_module bit mask
RDMA/nes: Fix routed RDMA connections
RDMA/nes: Enhanced PFT management scheme
RDMA/nes: Handle AE bounds violation
RDMA/nes: Limit critical error interrupts
RDMA/nes: Stop spurious MAC interrupts
RDMA/nes: Correct tso_wqe_length
RDMA/nes: Fill in firmware version for ethtool
RDMA/nes: Use ethtool timer value
RDMA/nes: Correct MAX TSO frags value
RDMA/nes: Enable MC/UC after changing MTU
RDMA/nes: Free NIC TX buffers when destroying NIC QP
RDMA/nes: Fix MDC setting
RDMA/nes: Add wqm_quanta module option
RDMA/nes: Module parameter permissions
RDMA/cxgb3: Set active_mtu in ib_port_attr
RDMA/nes: Add support for 4-port 1G HP blade card
RDMA/nes: Make mini_cm_connect() static
...
Linus Torvalds [Fri, 10 Oct 2008 18:13:55 +0000 (11:13 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/teigland/dlm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
dlm: choose better identifiers
dlm: remove bkl
dlm: fix address compare
dlm: fix locking of lockspace list in dlm_scand
dlm: detect available userspace daemon
dlm: allow multiple lockspace creates
Linus Torvalds [Fri, 10 Oct 2008 18:11:47 +0000 (11:11 -0700)]
Merge git://git./linux/kernel/git/agk/linux-2.6-dm
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
dm: detect lost queue
dm: publish dm_vcalloc
dm: publish dm_table_unplug_all
dm: publish dm_get_mapinfo
dm: export struct dm_dev
dm crypt: avoid unnecessary wait when splitting bio
dm crypt: tidy ctx pending
dm crypt: fix async inc_pending
dm crypt: move dec_pending on error into write_io_submit
dm crypt: remove inc_pending from write_io_submit
dm crypt: tidy write loop pending
dm crypt: tidy crypt alloc
dm crypt: tidy inc pending
dm exception store: use chunk_t for_areas
dm exception store: introduce area_location function
dm raid1: kcopyd should stop on error if errors handled
dm mpath: remove is_active from struct dm_path
dm mpath: use more error codes
Fixed up trivial conflict in drivers/md/dm-mpath.c manually.
Christoph Hellwig [Fri, 10 Oct 2008 06:28:29 +0000 (17:28 +1100)]
Fix barrier fail detection in XFS
Currently we disable barriers as soon as we get a buffer in xlog_iodone
that has the XBF_ORDERED flag cleared. But this can be the case not only
for buffers where the barrier failed, but also the first buffer of a
split log write in case of a log wraparound. Due to the disabled
barriers we can easily get directory corruption on unclean shutdowns.
So instead of using this check add a new buffer flag for failed barrier
writes.
This is a regression vs 2.6.26 caused by patch to use the right macro
to check for the ORDERED flag, as we previously got true returned for
every buffer.
Thanks to Toei Rei for reporting the bug.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: David Chinner <david@fromorbit.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 10 Oct 2008 18:02:22 +0000 (11:02 -0700)]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-nmw
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
GFS2: Support for I/O barriers
GFS2: Add UUID to GFS2 sb
GFS2: high time to take some time over atime
GFS2: The war on bloat
GFS2: GFS2 will panic if you misspell any mount options
GFS2: Direct IO write at end of file error
GFS2: Use an IS_ERR test rather than a NULL test
GFS2: Fix race relating to glock min-hold time
GFS2: Fix & clean up GFS2 rename
GFS2: rm on multiple nodes causes panic
GFS2: Fix metafs mounts
GFS2: Fix debugfs glock file iterator
Linus Torvalds [Fri, 10 Oct 2008 17:53:26 +0000 (10:53 -0700)]
Merge git://git./linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (37 commits)
[SCSI] zfcp: fix double dbf id usage
[SCSI] zfcp: wait on SCSI work to be finished before proceeding with init dev
[SCSI] zfcp: fix erp list usage without using locks
[SCSI] zfcp: prevent fc_remote_port_delete calls for unregistered rport
[SCSI] zfcp: fix deadlock caused by shared work queue tasks
[SCSI] zfcp: put threshold data in hba trace
[SCSI] zfcp: Simplify zfcp data structures
[SCSI] zfcp: Simplify get_adapter_by_busid
[SCSI] zfcp: remove all typedefs and replace them with standards
[SCSI] zfcp: attach and release SAN nameserver port on demand
[SCSI] zfcp: remove unused references, declarations and flags
[SCSI] zfcp: Update message with input from review
[SCSI] zfcp: add queue_full sysfs attribute
[SCSI] scsi_dh: suppress comparison warning
[SCSI] scsi_dh: add Dell product information into rdac device handler
[SCSI] qla2xxx: remove the unused SCSI_QLOGIC_FC_FIRMWARE option
[SCSI] qla2xxx: fix printk format warnings
[SCSI] qla2xxx: Update version number to 8.02.01-k8.
[SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing.
[SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling.
...
Linus Torvalds [Fri, 10 Oct 2008 17:52:45 +0000 (10:52 -0700)]
Merge branch 'for-2.6.28' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.28' of git://git.kernel.dk/linux-2.6-block: (132 commits)
doc/cdrom: Trvial documentation error, file not present
block_dev: fix kernel-doc in new functions
block: add some comments around the bio read-write flags
block: mark bio_split_pool static
block: Find bio sector offset given idx and offset
block: gendisk integrity wrapper
block: Switch blk_integrity_compare from bdev to gendisk
block: Fix double put in blk_integrity_unregister
block: Introduce integrity data ownership flag
block: revert part of
d7533ad0e132f92e75c1b2eb7c26387b25a583c1
bio.h: Remove unused conditional code
block: remove end_{queued|dequeued}_request()
block: change elevator to use __blk_end_request()
gdrom: change to use __blk_end_request()
memstick: change to use __blk_end_request()
virtio_blk: change to use __blk_end_request()
blktrace: use BLKTRACE_BDEV_SIZE as the name size for setup structure
block: add lld busy state exporting interface
block: Fix blk_start_queueing() to not kick a stopped queue
include blktrace_api.h in headers_install
...
Linus Torvalds [Fri, 10 Oct 2008 15:07:53 +0000 (08:07 -0700)]
Merge phase #1 of git://git./linux/kernel/git/tip/linux-2.6-tip
This merges phase 1 of the x86 tree, which is a collection of branches:
x86/alternatives, x86/cleanups, x86/commandline, x86/crashdump,
x86/debug, x86/defconfig, x86/doc, x86/exports, x86/fpu, x86/gart,
x86/idle, x86/mm, x86/mtrr, x86/nmi-watchdog, x86/oprofile,
x86/paravirt, x86/reboot, x86/sparse-fixes, x86/tsc, x86/urgent and
x86/vmalloc
and as Ingo says: "these are the easiest, purely independent x86 topics
with no conflicts, in one nice Octopus merge".
* 'x86-v28-for-linus-phase1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (147 commits)
x86: mtrr_cleanup: treat WRPROT as UNCACHEABLE
x86: mtrr_cleanup: first 1M may be covered in var mtrrs
x86: mtrr_cleanup: print out correct type v2
x86: trivial printk fix in efi.c
x86, debug: mtrr_cleanup print out var mtrr before change it
x86: mtrr_cleanup try gran_size to less than 1M, v3
x86: mtrr_cleanup try gran_size to less than 1M, cleanup
x86: change MTRR_SANITIZER to def_bool y
x86, debug printouts: IOMMU setup failures should not be KERN_ERR
x86: export set_memory_ro and set_memory_rw
x86: mtrr_cleanup try gran_size to less than 1M
x86: mtrr_cleanup prepare to make gran_size to less 1M
x86: mtrr_cleanup safe to get more spare regs now
x86_64: be less annoying on boot, v2
x86: mtrr_cleanup hole size should be less than half of chunk_size, v2
x86: add mtrr_cleanup_debug command line
x86: mtrr_cleanup optimization, v2
x86: don't need to go to chunksize to 4G
x86_64: be less annoying on boot
x86, olpc: fix endian bug in openfirmware workaround
...
Linus Torvalds [Fri, 10 Oct 2008 15:00:17 +0000 (08:00 -0700)]
PnP: move pnpacpi/pnpbios_init to after PCI init
We already did that a long time ago for pnp_system_init, but
pnpacpi_init and pnpbios_init remained as subsys_initcalls, and get
linked into the kernel before the arch-specific routines that finalize
the PCI resources (pci_subsys_init).
This means that the PnP routines would either register their resources
before the PCI layer could, or would be unable to check whether a PCI
resource had already been registered. Both are problematic.
I wanted to do this before 2.6.27, but every time we change something
like this, something breaks. That said, _every_ single time we trust
some firmware (like PnP tables) more than we trust the hardware itself
(like PCI probing), the problems have been worse.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 10 Oct 2008 14:46:45 +0000 (07:46 -0700)]
Merge branch 'upstream-2.6.28' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'upstream-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
ata_piix: IDE Mode SATA patch for Intel Ibex Peak DeviceIDs
libata-eh: clear UNIT ATTENTION after reset
ata_piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list
libata: reorder ata_device to remove 8 bytes of padding on 64 bits
[libata] pata_bf54x: Add proper PM operation
pata_sil680: convert CONFIG_PPC_MERGE to CONFIG_PPC
libata: Implement disk shock protection support
[libata] Introduce ata_id_has_unload()
PATA: RPC now selects HAVE_PATA_PLATFORM for pata platform driver
ata_piix: drop merged SCR access and use slave_link instead
libata: implement slave_link
libata: misc updates to prepare for slave link
libata: reimplement link iterator
libata: make SCR access ops per-link
Alasdair G Kergon [Fri, 10 Oct 2008 12:37:13 +0000 (13:37 +0100)]
dm: detect lost queue
Detect and report buggy drivers that destroy their request_queue.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: Stefan Raspl <raspl@linux.vnet.ibm.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Mikulas Patocka [Fri, 10 Oct 2008 12:37:12 +0000 (13:37 +0100)]
dm: publish dm_vcalloc
Publish dm_vcalloc in include/linux/device-mapper.h because this function is
used by targets.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Fri, 10 Oct 2008 12:37:11 +0000 (13:37 +0100)]
dm: publish dm_table_unplug_all
Publish dm_table_unplug_all in include/linux/device-mapper.h because this
function is used by targets.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Fri, 10 Oct 2008 12:37:10 +0000 (13:37 +0100)]
dm: publish dm_get_mapinfo
Publish dm_get_mapinfo in include/linux/device-mapper.h because this function
is used by targets.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Fri, 10 Oct 2008 12:37:09 +0000 (13:37 +0100)]
dm: export struct dm_dev
Split struct dm_dev in two and publish the part that other targets need in
include/linux/device-mapper.h.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Milan Broz [Fri, 10 Oct 2008 12:37:08 +0000 (13:37 +0100)]
dm crypt: avoid unnecessary wait when splitting bio
Don't wait between submitting crypt requests for a bio unless
we are short of memory.
There are two situations when we must split an encrypted bio:
1) there are no free pages;
2) the new bio would violate underlying device restrictions
(e.g. max hw segments).
In case (2) we do not need to wait.
Add output variable to crypt_alloc_buffer() to distinguish between
these cases.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Milan Broz [Fri, 10 Oct 2008 12:37:08 +0000 (13:37 +0100)]
dm crypt: tidy ctx pending
Move the initialisation of ctx->pending into one place, at the
start of crypt_convert().
Introduce crypt_finished to indicate whether or not the encryption
is finished, for use in a later patch.
No functional change.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Milan Broz [Fri, 10 Oct 2008 12:37:07 +0000 (13:37 +0100)]
dm crypt: fix async inc_pending
The pending reference count must be incremented *before* the async work is
queued to another thread, not after. Otherwise there's a race if the
work completes and decrements the reference count before it gets incremented.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Milan Broz [Fri, 10 Oct 2008 12:37:06 +0000 (13:37 +0100)]
dm crypt: move dec_pending on error into write_io_submit
Make kcryptd_crypt_write_io_submit() responsible for decrementing
the pending count after an error.
Also fixes a bug in the async path that forgot to decrement it.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Alasdair G Kergon [Fri, 10 Oct 2008 12:37:05 +0000 (13:37 +0100)]
dm crypt: remove inc_pending from write_io_submit
Make the caller reponsible for incrementing the pending count before calling
kcryptd_crypt_write_io_submit() in the non-async case to bring it into line
with the async case.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Milan Broz [Fri, 10 Oct 2008 12:37:04 +0000 (13:37 +0100)]
dm crypt: tidy write loop pending
Move kcryptd_crypt_write_convert_loop inside kcryptd_crypt_write_convert.
This change is needed for a later patch.
No functional change.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Milan Broz [Fri, 10 Oct 2008 12:37:03 +0000 (13:37 +0100)]
dm crypt: tidy crypt alloc
Factor out crypt io allocation code.
Later patches will call it from another place.
No functional change.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Milan Broz [Fri, 10 Oct 2008 12:37:02 +0000 (13:37 +0100)]
dm crypt: tidy inc pending
Move io pending to one place.
No functional change, usefull to simplify debugging.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Fri, 10 Oct 2008 12:37:01 +0000 (13:37 +0100)]
dm exception store: use chunk_t for_areas
Change uint32_t into chunk_t to remove 32-bit limitation on the
number of chunks on systems with 64-bit sector numbers.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Fri, 10 Oct 2008 12:37:00 +0000 (13:37 +0100)]
dm exception store: introduce area_location function
Move this logic to a function, because it will be reused later.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Jonathan Brassow [Fri, 10 Oct 2008 12:36:59 +0000 (13:36 +0100)]
dm raid1: kcopyd should stop on error if errors handled
dm-raid1 is setting the 'DM_KCOPYD_IGNORE_ERROR' flag unconditionally
when assigning kcopyd work. kcopyd is responsible for copying an
assigned section of disk to one or more other disks. The
'DM_KCOPYD_IGNORE_ERROR' flag affects kcopyd in the following way:
When not set:
kcopyd will immediately stop the copy operation when an error is
encountered.
When set:
kcopyd will try to proceed regardless of errors and try to continue
copying any remaining amount.
Since dm-raid1 tracks regions of the address space that are (or
are not) in sync and it now has the ability to handle these
errors, we can safely enable this optimization. This optimization
is conditional on whether mirror error handling has been enabled.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Kiyoshi Ueda [Fri, 10 Oct 2008 12:36:58 +0000 (13:36 +0100)]
dm mpath: remove is_active from struct dm_path
This patch moves 'is_active' from struct dm_path to struct pgpath
as it does not need exporting.
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Benjamin Marzinski [Fri, 10 Oct 2008 12:36:57 +0000 (13:36 +0100)]
dm mpath: use more error codes
This patch allows path errors from the multipath ctr function to
propagate up to userspace as errno values from the ioctl() call.
This is in response to
https://www.redhat.com/archives/dm-devel/2008-May/msg00000.html
and
https://bugzilla.redhat.com/show_bug.cgi?id=444421
The patch only lets through the errors that it needs to in order to
get the path errors from parse_path().
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Randy Dunlap [Fri, 10 Oct 2008 06:22:44 +0000 (08:22 +0200)]
doc/cdrom: Trvial documentation error, file not present
The sbpcd tester program is not included in the kernel source tree,
so remove the reference to it.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-by: Nick Warne <nick@ukfsn.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Roland Dreier [Fri, 10 Oct 2008 00:41:15 +0000 (17:41 -0700)]
Merge branches 'cma', 'cxgb3', 'ehca', 'ipath', 'ipoib', 'mad', 'misc', 'mlx4', 'mthca' and 'nes' into for-next
Chien Tung [Fri, 10 Oct 2008 00:41:05 +0000 (17:41 -0700)]
RDMA/nes: Fix slab corruption
Referencing cm_node after it is freed via rem_ref_cm_node() causes a
slab corruption. There is no need to set cm_node->cm_id to NULL in
mini_cm_close().
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
James Morris [Fri, 10 Oct 2008 00:09:47 +0000 (11:09 +1100)]
Merge branch 'next' into for-linus
Linus Torvalds [Thu, 9 Oct 2008 22:13:53 +0000 (15:13 -0700)]
Linux 2.6.27
Linus Torvalds [Thu, 9 Oct 2008 21:04:54 +0000 (14:04 -0700)]
Don't allow splice() to files opened with O_APPEND
This is debatable, but while we're debating it, let's disallow the
combination of splice and an O_APPEND destination.
It's not entirely clear what the semantics of O_APPEND should be, and
POSIX apparently expects pwrite() to ignore O_APPEND, for example. So
we could make up any semantics we want, including the old ones.
But Miklos convinced me that we should at least give it some thought,
and that accepting writes at arbitrary offsets is wrong at least for
IS_APPEND() files (which always have O_APPEND set, even if the reverse
isn't true: you can obviously have O_APPEND set on a regular file).
So disallow O_APPEND entirely for now. I doubt anybody cares, and this
way we have one less gray area to worry about.
Reported-and-argued-for-by: Miklos Szeredi <miklos@szeredi.hu>
Acked-by: Jens Axboe <ens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 9 Oct 2008 19:23:54 +0000 (12:23 -0700)]
Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X
hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X
hwmon: (adt7473) Fix some bogosity in documentation file
hwmon: Define sysfs interface for energy consumption register
hwmon: (it87) Prevent power-off on Shuttle SN68PT
eeepc-laptop: Fix hwmon interface
Linus Torvalds [Thu, 9 Oct 2008 19:23:35 +0000 (12:23 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] correct broken links and email addresses
Matt Mackall [Wed, 8 Oct 2008 19:51:57 +0000 (14:51 -0500)]
SLOB: fix bogus ksize calculation fix
This fixes the previous fix, which was completely wrong on closer
inspection. This version has been manually tested with a user-space
test harness and generates sane values. A nearly identical patch has
been boot-tested.
The problem arose from changing how kmalloc/kfree handled alignment
padding without updating ksize to match. This brings it in sync.
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Németh Márton [Thu, 9 Oct 2008 12:59:17 +0000 (14:59 +0200)]
[CPUFREQ] correct broken links and email addresses
Replace the no longer working links and email address in the
documentation and in source code.
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Dave Jones <davej@redhat.com>
Ingo Molnar [Thu, 9 Oct 2008 09:35:51 +0000 (11:35 +0200)]
sched debug: add name to sched_domain sysctl entries
add /proc/sys/kernel/sched_domain/cpu0/domain0/name, to make
it easier to see which specific scheduler domain remained at
that entry.
Since we process the scheduler domain tree and
simplify it, it's not always immediately clear during debugging
which domain came from where.
depends on CONFIG_SCHED_DEBUG=y.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Alistair John Strachan [Thu, 9 Oct 2008 13:33:59 +0000 (15:33 +0200)]
hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X
Enable driver checking of the DMI product name (when enabled) on
an Abit AT8 32X, instead of falling back to a manual probe. This
eliminates false negatives and eventually will help avoid
unnecessary bus probes on unsupported mainboards.
Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: Daniel Exner <dex@dragonslave.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Alistair John Strachan [Thu, 9 Oct 2008 13:33:59 +0000 (15:33 +0200)]
hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X
The table for the Abit AT8 32X was incorrectly missing an entry
for the sixth ("AUX3") fan. Add this entry, exporting the fan
reading to userspace.
Closes lm-sensors.org ticket #2339.
Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: Daniel Exner <dex@dragonslave.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Darrick J. Wong [Thu, 9 Oct 2008 13:33:58 +0000 (15:33 +0200)]
hwmon: (adt7473) Fix some bogosity in documentation file
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Darrick J. Wong [Thu, 9 Oct 2008 13:33:58 +0000 (15:33 +0200)]
hwmon: Define sysfs interface for energy consumption register
Describe the sysfs files that were introduced in the ibmaem driver.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Thu, 9 Oct 2008 13:33:58 +0000 (15:33 +0200)]
hwmon: (it87) Prevent power-off on Shuttle SN68PT
On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan,
but to something else. One user has reported instant system power-off
when changing the PWM2 duty cycle, so we disable it.
I use the board name string as the trigger in case the same board is
ever used in other systems.
This closes lm-sensors ticket #2349:
pwmconfig causes a hard poweroff
http://www.lm-sensors.org/ticket/2349
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Corentin Chary [Thu, 9 Oct 2008 13:33:57 +0000 (15:33 +0200)]
eeepc-laptop: Fix hwmon interface
Creates a name file in the sysfs directory, that
is needed for the libsensors library to work.
Also rename fan1_pwm to pwm1 and scale its value as needed.
This fixes bug #11520:
http://bugzilla.kernel.org/show_bug.cgi?id=11520
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Randy Dunlap [Thu, 9 Oct 2008 08:42:38 +0000 (10:42 +0200)]
block_dev: fix kernel-doc in new functions
Fix kernel-doc in new functions:
Error(mmotm-2008-1002-1617//fs/block_dev.c:895): duplicate section name 'Description'
Error(mmotm-2008-1002-1617//fs/block_dev.c:924): duplicate section name 'Description'
Warning(mmotm-2008-1002-1617//fs/block_dev.c:1282): No description found for parameter 'pathname'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe [Thu, 9 Oct 2008 07:01:10 +0000 (09:01 +0200)]
block: add some comments around the bio read-write flags
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Denis ChengRq [Thu, 9 Oct 2008 06:57:05 +0000 (08:57 +0200)]
block: mark bio_split_pool static
Since all bio_split calls refer the same single bio_split_pool, the bio_split
function can use bio_split_pool directly instead of the mempool_t parameter;
then the mempool_t parameter can be removed from bio_split param list, and
bio_split_pool is only referred in fs/bio.c file, can be marked static.
Signed-off-by: Denis ChengRq <crquan@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Martin K. Petersen [Thu, 2 Oct 2008 02:42:53 +0000 (22:42 -0400)]
block: Find bio sector offset given idx and offset
Helper function to find the sector offset in a bio given bvec index
and page offset.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Martin K. Petersen [Thu, 2 Oct 2008 16:47:49 +0000 (18:47 +0200)]
block: gendisk integrity wrapper
This is a wrapper for accessing a gendisk's integrity bits. It allows
the integrity support in MD to be compiled with BLK_DEV_INTEGRITY off.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
projects / platform / kernel / linux-exynos.git / log