Vladimir Oltean [Tue, 16 Aug 2022 13:53:52 +0000 (16:53 +0300)]
net: mscc: ocelot: report ndo_get_stats64 from the wraparound-resistant ocelot->stats
Rather than reading the stats64 counters directly from the 32-bit
hardware, it's better to rely on the output produced by the periodic
ocelot_port_update_stats().
It would be even better to call ocelot_port_update_stats() right from
ocelot_get_stats64() to make sure we report the current values rather
than the ones from 2 seconds ago. But we need to export
ocelot_port_update_stats() from the switch lib towards the switchdev
driver for that, and future work will largely undo that.
There are more ocelot-based drivers waiting to be introduced, an example
of which is the SPI-controlled VSC7512. In that driver's case, it will
be impossible to call ocelot_port_update_stats() from ndo_get_stats64
context, since the latter is atomic, and reading the stats over SPI is
sleepable. So the compromise taken here, which will also hold going
forward, is to report 64-bit counters to stats64, which are not 100% up
to date.
Fixes:
a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 16 Aug 2022 13:53:51 +0000 (16:53 +0300)]
net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset
With so many counter addresses recently discovered as being wrong, it is
desirable to at least have a central database of information, rather
than two: one through the SYS_COUNT_* registers (used for
ndo_get_stats64), and the other through the offset field of struct
ocelot_stat_layout elements (used for ethtool -S).
The strategy will be to keep the SYS_COUNT_* definitions as the single
source of truth, but for that we need to expand our current definitions
to cover all registers. Then we need to convert the ocelot region
creation logic, and stats worker, to the read semantics imposed by going
through SYS_COUNT_* absolute register addresses, rather than offsets
of 32-bit words relative to SYS_COUNT_RX_OCTETS (which should have been
SYS_CNT, by the way).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 16 Aug 2022 13:53:50 +0000 (16:53 +0300)]
net: mscc: ocelot: make struct ocelot_stat_layout array indexable
The ocelot counters are 32-bit and require periodic reading, every 2
seconds, by ocelot_port_update_stats(), so that wraparounds are
detected.
Currently, the counters reported by ocelot_get_stats64() come from the
32-bit hardware counters directly, rather than from the 64-bit
accumulated ocelot->stats, and this is a problem for their integrity.
The strategy is to make ocelot_get_stats64() able to cherry-pick
individual stats from ocelot->stats the way in which it currently reads
them out from SYS_COUNT_* registers. But currently it can't, because
ocelot->stats is an opaque u64 array that's used only to feed data into
ethtool -S.
To solve that problem, we need to make ocelot->stats indexable, and
associate each element with an element of struct ocelot_stat_layout used
by ethtool -S.
This makes ocelot_stat_layout a fat (and possibly sparse) array, so we
need to change the way in which we access it. We no longer need
OCELOT_STAT_END as a sentinel, because we know the array's size
(OCELOT_NUM_STATS). We just need to skip the array elements that were
left unpopulated for the switch revision (ocelot, felix, seville).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 16 Aug 2022 13:53:49 +0000 (16:53 +0300)]
net: mscc: ocelot: fix race between ndo_get_stats64 and ocelot_check_stats_work
The 2 methods can run concurrently, and one will change the window of
counters (SYS_STAT_CFG_STAT_VIEW) that the other sees. The fix is
similar to what commit
7fbf6795d127 ("net: mscc: ocelot: fix mutex lock
error during ethtool stats read") has done for ethtool -S.
Fixes:
a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 16 Aug 2022 13:53:48 +0000 (16:53 +0300)]
net: mscc: ocelot: turn stats_lock into a spinlock
ocelot_get_stats64() currently runs unlocked and therefore may collide
with ocelot_port_update_stats() which indirectly accesses the same
counters. However, ocelot_get_stats64() runs in atomic context, and we
cannot simply take the sleepable ocelot->stats_lock mutex. We need to
convert it to an atomic spinlock first. Do that as a preparatory change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 16 Aug 2022 13:53:47 +0000 (16:53 +0300)]
net: mscc: ocelot: fix address of SYS_COUNT_TX_AGING counter
This register, used as part of stats->tx_dropped in
ocelot_get_stats64(), has a wrong address. At the address currently
given, there is actually the c_tx_green_prio_6 counter.
Fixes:
a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 16 Aug 2022 13:53:46 +0000 (16:53 +0300)]
net: mscc: ocelot: fix incorrect ndo_get_stats64 packet counters
Reading stats using the SYS_COUNT_* register definitions is only used by
ocelot_get_stats64() from the ocelot switchdev driver, however,
currently the bucket definitions are incorrect.
Separately, on both RX and TX, we have the following problems:
- a 256-1023 bucket which actually tracks the 256-511 packets
- the 1024-1526 bucket actually tracks the 512-1023 packets
- the 1527-max bucket actually tracks the 1024-1526 packets
=> nobody tracks the packets from the real 1527-max bucket
Additionally, the RX_PAUSE, RX_CONTROL, RX_LONGS and RX_CLASSIFIED_DROPS
all track the wrong thing. However this doesn't seem to have any
consequence, since ocelot_get_stats64() doesn't use these.
Even though this problem only manifests itself for the switchdev driver,
we cannot split the fix for ocelot and for DSA, since it requires fixing
the bucket definitions from enum ocelot_reg, which makes us necessarily
adapt the structures from felix and seville as well.
Fixes:
84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953 switch")
Fixes:
56051948773e ("net: dsa: ocelot: add driver for Felix switch family")
Fixes:
a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 16 Aug 2022 13:53:45 +0000 (16:53 +0300)]
net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet counters
What the driver actually reports as 256-511 is in fact 512-1023, and the
TX packets in the 256-511 bucket are not reported. Fix that.
Fixes:
56051948773e ("net: dsa: ocelot: add driver for Felix switch family")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 16 Aug 2022 20:14:45 +0000 (23:14 +0300)]
net: dsa: don't warn in dsa_port_set_state_now() when driver doesn't support it
ds->ops->port_stp_state_set() is, like most DSA methods, optional, and
if absent, the port is supposed to remain in the forwarding state (as
standalone). Such is the case with the mv88e6060 driver, which does not
offload the bridge layer. DSA warns that the STP state can't be changed
to FORWARDING as part of dsa_port_enable_rt(), when in fact it should not.
The error message is also not up to modern standards, so take the
opportunity to make it more descriptive.
Fixes:
fd3645413197 ("net: dsa: change scope of STP state setter")
Reported-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Sergei Antonov <saproj@gmail.com>
Link: https://lore.kernel.org/r/20220816201445.1809483-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rustam Subkhankulov [Wed, 17 Aug 2022 00:38:45 +0000 (03:38 +0300)]
net: dsa: sja1105: fix buffer overflow in sja1105_setup_devlink_regions()
If an error occurs in dsa_devlink_region_create(), then 'priv->regions'
array will be accessed by negative index '-1'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes:
bf425b82059e ("net: dsa: sja1105: expose static config as devlink region")
Link: https://lore.kernel.org/r/20220817003845.389644-1-subkhankulov@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enzo Matsumiya [Wed, 17 Aug 2022 19:08:34 +0000 (16:08 -0300)]
cifs: remove useless parameter 'is_fsctl' from SMB2_ioctl()
SMB2_ioctl() is always called with is_fsctl = true, so doesn't make any
sense to have it at all.
Thus, always set SMB2_0_IOCTL_IS_FSCTL flag on the request.
Also, as per MS-SMB2 3.3.5.15 "Receiving an SMB2 IOCTL Request", servers
must fail the request if the request flags is zero anyway.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Jakub Kicinski [Thu, 18 Aug 2022 03:17:44 +0000 (20:17 -0700)]
Merge git://git./linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: conntrack and nf_tables bug fixes
The following patchset contains netfilter fixes for net.
Broken since 5.19:
A few ancient connection tracking helpers assume TCP packets cannot
exceed 64kb in size, but this isn't the case anymore with 5.19 when
BIG TCP got merged, from myself.
Regressions since 5.19:
1. 'conntrack -E expect' won't display anything because nfnetlink failed
to enable events for expectations, only for normal conntrack events.
2. partially revert change that added resched calls to a function that can
be in atomic context. Both broken and fixed up by myself.
Broken for several releases (up to original merge of nf_tables):
Several fixes for nf_tables control plane, from Pablo.
This fixes up resource leaks in error paths and adds more sanity
checks for mutually exclusive attributes/flags.
Kconfig:
NF_CONNTRACK_PROCFS is very old and doesn't provide all info provided
via ctnetlink, so it should not default to y. From Geert Uytterhoeven.
Selftests:
rework nft_flowtable.sh: it frequently indicated failure; the way it
tried to detect an offload failure did not work reliably.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
testing: selftests: nft_flowtable.sh: rework test to detect offload failure
testing: selftests: nft_flowtable.sh: use random netns names
netfilter: conntrack: NF_CONNTRACK_PROCFS should no longer default to y
netfilter: nf_tables: check NFT_SET_CONCAT flag if field_count is specified
netfilter: nf_tables: disallow NFT_SET_ELEM_CATCHALL and NFT_SET_ELEM_INTERVAL_END
netfilter: nf_tables: NFTA_SET_ELEM_KEY_END requires concat and interval flags
netfilter: nf_tables: validate NFTA_SET_ELEM_OBJREF based on NFT_SET_OBJECT flag
netfilter: nf_tables: really skip inactive sets when allocating name
netfilter: nfnetlink: re-enable conntrack expectation events
netfilter: nf_tables: fix scheduling-while-atomic splat
netfilter: nf_ct_irc: cap packet search space to 4k
netfilter: nf_ct_ftp: prefer skb_linearize
netfilter: nf_ct_h323: cap packet size at 64k
netfilter: nf_ct_sane: remove pseudo skb linearization
netfilter: nf_tables: possible module reference underflow in error path
netfilter: nf_tables: disallow NFTA_SET_ELEM_KEY_END with NFT_SET_ELEM_INTERVAL_END flag
netfilter: nf_tables: use READ_ONCE and WRITE_ONCE for shared generation id access
====================
Link: https://lore.kernel.org/r/20220817140015.25843-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells [Tue, 16 Aug 2022 09:34:40 +0000 (10:34 +0100)]
net: Fix suspicious RCU usage in bpf_sk_reuseport_detach()
bpf_sk_reuseport_detach() calls __rcu_dereference_sk_user_data_with_flags()
to obtain the value of sk->sk_user_data, but that function is only usable
if the RCU read lock is held, and neither that function nor any of its
callers hold it.
Fix this by adding a new helper, __locked_read_sk_user_data_with_flags()
that checks to see if sk->sk_callback_lock() is held and use that here
instead.
Alternatively, making __rcu_dereference_sk_user_data_with_flags() use
rcu_dereference_checked() might suffice.
Without this, the following warning can be occasionally observed:
=============================
WARNING: suspicious RCU usage
6.0.0-rc1-build2+ #563 Not tainted
-----------------------------
include/net/sock.h:592 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
5 locks held by locktest/29873:
#0:
ffff88812734b550 (&sb->s_type->i_mutex_key#9){+.+.}-{3:3}, at: __sock_release+0x77/0x121
#1:
ffff88812f5621b0 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_close+0x1c/0x70
#2:
ffff88810312f5c8 (&h->lhash2[i].lock){+.+.}-{2:2}, at: inet_unhash+0x76/0x1c0
#3:
ffffffff83768bb8 (reuseport_lock){+...}-{2:2}, at: reuseport_detach_sock+0x18/0xdd
#4:
ffff88812f562438 (clock-AF_INET){++..}-{2:2}, at: bpf_sk_reuseport_detach+0x24/0xa4
stack backtrace:
CPU: 1 PID: 29873 Comm: locktest Not tainted 6.0.0-rc1-build2+ #563
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
<TASK>
dump_stack_lvl+0x4c/0x5f
bpf_sk_reuseport_detach+0x6d/0xa4
reuseport_detach_sock+0x75/0xdd
inet_unhash+0xa5/0x1c0
tcp_set_state+0x169/0x20f
? lockdep_sock_is_held+0x3a/0x3a
? __lock_release.isra.0+0x13e/0x220
? reacquire_held_locks+0x1bb/0x1bb
? hlock_class+0x31/0x96
? mark_lock+0x9e/0x1af
__tcp_close+0x50/0x4b6
tcp_close+0x28/0x70
inet_release+0x8e/0xa7
__sock_release+0x95/0x121
sock_close+0x14/0x17
__fput+0x20f/0x36a
task_work_run+0xa3/0xcc
exit_to_user_mode_prepare+0x9c/0x14d
syscall_exit_to_user_mode+0x18/0x44
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes:
cf8c1e967224 ("net: refactor bpf_sk_reuseport_detach()")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hawkins Jiawei <yin31149@gmail.com>
Link: https://lore.kernel.org/r/166064248071.3502205.10036394558814861778.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enzo Matsumiya [Wed, 17 Aug 2022 17:14:02 +0000 (14:14 -0300)]
cifs: remove unused server parameter from calc_smb_size()
This parameter is unused by the called function
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Dave Airlie [Wed, 17 Aug 2022 22:51:04 +0000 (08:51 +1000)]
Merge tag 'drm-misc-fixes-2022-08-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One patch for imx/dcss to get rid of a warning message, one off-by-one
fix and GA103 support for nouveau, a refcounting fix for meson, a NULL
pointer dereference fix for ttm, a error check fix for lvds-codec, a
dt-binding schema fix and an underflow fix for sun4i
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816094401.wtadc7ddr6lzq6aj@houat
Dave Airlie [Wed, 17 Aug 2022 22:45:45 +0000 (08:45 +1000)]
Merge tag 'drm-intel-next-fixes-2022-08-11' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- disable pci resize on 32-bit systems (Nirmoy)
- don't leak the ccs state (Matt)
- TLB invalidation fixes (Chris)
[now with all fixes of fixes]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YvVumNCga+90fYN0@intel.com
Linus Torvalds [Wed, 17 Aug 2022 21:51:22 +0000 (14:51 -0700)]
Merge tag 'ntfs3_for_6.0' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
- implement FALLOC_FL_INSERT_RANGE
- fix some logic errors
- fixed xfstests (tested on x86_64): generic/064 generic/213
generic/300 generic/361 generic/449 generic/485
- some dead code removed or refactored
* tag 'ntfs3_for_6.0' of https://github.com/Paragon-Software-Group/linux-ntfs3: (39 commits)
fs/ntfs3: uninitialized variable in ntfs_set_acl_ex()
fs/ntfs3: Remove unused function wnd_bits
fs/ntfs3: Make ni_ins_new_attr return error
fs/ntfs3: Create MFT zone only if length is large enough
fs/ntfs3: Refactoring attr_insert_range to restore after errors
fs/ntfs3: Refactoring attr_punch_hole to restore after errors
fs/ntfs3: Refactoring attr_set_size to restore after errors
fs/ntfs3: New function ntfs_bad_inode
fs/ntfs3: Make MFT zone less fragmented
fs/ntfs3: Check possible errors in run_pack in advance
fs/ntfs3: Added comments to frecord functions
fs/ntfs3: Fill duplicate info in ni_add_name
fs/ntfs3: Make static function attr_load_runs
fs/ntfs3: Add new argument is_mft to ntfs_mark_rec_free
fs/ntfs3: Remove unused mi_mark_free
fs/ntfs3: Fix very fragmented case in attr_punch_hole
fs/ntfs3: Fix work with fragmented xattr
fs/ntfs3: Make ntfs_fallocate return -ENOSPC instead of -EFBIG
fs/ntfs3: extend ni_insert_nonresident to return inserted ATTR_LIST_ENTRY
fs/ntfs3: Check reserved size for maximum allowed
...
Linus Torvalds [Thu, 11 Aug 2022 22:29:46 +0000 (15:29 -0700)]
dcache: move the DCACHE_OP_COMPARE case out of the __d_lookup_rcu loop
__d_lookup_rcu() is one of the hottest functions in the kernel on
certain loads, and it is complicated by filesystems that might want to
have their own name compare function.
We can improve code generation by moving the test of DCACHE_OP_COMPARE
outside the loop, which makes the loop itself much simpler, at the cost
of some code duplication. But both cases end up being simpler, and the
"native" direct case-sensitive compare particularly so.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arun Ramadoss [Tue, 16 Aug 2022 10:55:16 +0000 (16:25 +0530)]
net: dsa: microchip: ksz9477: fix fdb_dump last invalid entry
In the ksz9477_fdb_dump function it reads the ALU control register and
exit from the timeout loop if there is valid entry or search is
complete. After exiting the loop, it reads the alu entry and report to
the user space irrespective of entry is valid. It works till the valid
entry. If the loop exited when search is complete, it reads the alu
table. The table returns all ones and it is reported to user space. So
bridge fdb show gives ff:ff:ff:ff:ff:ff as last entry for every port.
To fix it, after exiting the loop the entry is reported only if it is
valid one.
Fixes:
b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220816105516.18350-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chris Wilson [Thu, 28 Jul 2022 02:20:26 +0000 (19:20 -0700)]
drm/i915/guc: Use streaming loads to speed up dumping the guc log
Use a temporary page and mempy_from_wc to reduce the time it takes to
dump the guc log to debugfs.
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728022028.2190627-6-John.C.Harrison@Intel.com
John Harrison [Thu, 28 Jul 2022 02:20:25 +0000 (19:20 -0700)]
drm/i915/guc: Record CTB info in error logs
When debugging GuC communication issues, it is useful to have the CTB
info available. So add the state and buffer contents to the error
capture log.
Also, add a sub-structure for the GuC specific error capture info as
it is now becoming numerous.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728022028.2190627-5-John.C.Harrison@Intel.com
John Harrison [Thu, 28 Jul 2022 02:20:24 +0000 (19:20 -0700)]
drm/i915/guc: Add GuC <-> kernel time stamp translation information
It is useful to be able to match GuC events to kernel events when
looking at the GuC log. That requires being able to convert GuC
timestamps to kernel time. So, when dumping error captures and/or GuC
logs, include a stamp in both time zones plus the clock frequency.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728022028.2190627-4-John.C.Harrison@Intel.com
John Harrison [Thu, 28 Jul 2022 02:20:23 +0000 (19:20 -0700)]
drm/i915/guc: Fix capture size warning and bump the size
There was a size check to warn if the GuC error state capture buffer
allocation would be too small to fit a reasonable amount of capture
data for the current platform. Unfortunately, the test was done too
early in the boot sequence and was actually testing 'if(-ENODEV >
size)'.
Move the check to be later. The check is only used to print a warning
message, so it doesn't really matter how early or late it is done.
Note that it is not possible to dynamically size the buffer because
the allocation needs to be done before the engine information is
available (at least, it would be in the intended two-phase GuC init
process).
Now that the check works, it is reporting size too small for newer
platforms. The check includes a 3x oversample multiplier to allow for
multiple error captures to be bufferd by GuC before i915 has a chance
to read them out. This is less important than simply being big enough
to fit the first capture.
So a) bump the default size to be large enough for one capture minimum
and b) make the warning only if one capture won't fit, instead use a
notice for the 3x size.
Note that the size estimate is a worst case scenario. Actual captures
will likely be smaller.
Lastly, use drm_warn istead of DRM_WARN as the former provides more
infmration and the latter is deprecated.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728022028.2190627-3-John.C.Harrison@Intel.com
Alan Previn [Thu, 28 Jul 2022 02:20:22 +0000 (19:20 -0700)]
drm/i915/guc: Add a helper for log buffer size
Add a helper to get GuC log buffer size.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728022028.2190627-2-John.C.Harrison@Intel.com
Sylwester Dziedziuch [Wed, 3 Aug 2022 08:42:46 +0000 (10:42 +0200)]
ice: Fix VF not able to send tagged traffic with no VLAN filters
VF was not able to send tagged traffic when it didn't
have any VLAN interfaces and VLAN anti-spoofing was enabled.
Fix this by allowing VFs with no VLAN filters to send tagged
traffic. After VF adds a VLAN interface it will be able to
send tagged traffic matching VLAN filters only.
Testing hints:
1. Spawn VF
2. Send tagged packet from a VF
3. The packet should be sent out and not dropped
4. Add a VLAN interface on VF
5. Send tagged packet on that VLAN interface
6. Packet should be sent out and not dropped
7. Send tagged packet with id different than VLAN interface
8. Packet should be dropped
Fixes:
daf4dd16438b ("ice: Refactor spoofcheck configuration functions")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Benjamin Mikailenko [Fri, 12 Aug 2022 13:25:50 +0000 (15:25 +0200)]
ice: Ignore error message when setting same promiscuous mode
Commit
1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling")
introduced new checks when setting/clearing promiscuous mode. But if the
requested promiscuous mode setting already exists, an -EEXIST error
message would be printed. This is incorrect because promiscuous mode is
either on/off and shouldn't print an error when the requested
configuration is already set.
This can happen when removing a bridge with two bonded interfaces and
promiscuous most isn't fully cleared from VLAN VSI in hardware.
Fix this by ignoring cases where requested promiscuous mode exists.
Fixes:
1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling")
Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com>
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Grzegorz Siwik [Fri, 12 Aug 2022 13:25:49 +0000 (15:25 +0200)]
ice: Fix clearing of promisc mode with bridge over bond
When at least two interfaces are bonded and a bridge is enabled on the
bond, an error can occur when the bridge is removed and re-added. The
reason for the error is because promiscuous mode was not fully cleared from
the VLAN VSI in the hardware. With this change, promiscuous mode is
properly removed when the bridge disconnects from bonding.
[ 1033.676359] bond1: link status definitely down for interface enp95s0f0, disabling it
[ 1033.676366] bond1: making interface enp175s0f0 the new active one
[ 1033.676369] device enp95s0f0 left promiscuous mode
[ 1033.676522] device enp175s0f0 entered promiscuous mode
[ 1033.676901] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.795662] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.944826] bond1: link status definitely down for interface enp175s0f0, disabling it
[ 1041.944874] device enp175s0f0 left promiscuous mode
[ 1041.944918] bond1: now running without any active interface!
Fixes:
c31af68a1b94 ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations")
Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Grzegorz Siwik [Fri, 12 Aug 2022 13:25:48 +0000 (15:25 +0200)]
ice: Ignore EEXIST when setting promisc mode
Ignore EEXIST error when setting promiscuous mode.
This fix is needed because the driver could set promiscuous mode
when it still has not cleared properly.
Promiscuous mode could be set only once, so setting it second
time will be rejected.
Fixes:
5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Grzegorz Siwik [Fri, 12 Aug 2022 13:25:47 +0000 (15:25 +0200)]
ice: Fix double VLAN error when entering promisc mode
Avoid enabling or disabling VLAN 0 when trying to set promiscuous
VLAN mode if double VLAN mode is enabled. This fix is needed
because the driver tries to add the VLAN 0 filter twice (once for
inner and once for outer) when double VLAN mode is enabled. The
filter program is rejected by the firmware when double VLAN is
enabled, because the promiscuous filter only needs to be set once.
This issue was missed in the initial implementation of double VLAN
mode.
Fixes:
5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Christoffer Sandberg [Wed, 17 Aug 2022 13:51:44 +0000 (15:51 +0200)]
ALSA: hda/realtek: Add quirk for Clevo NS50PU, NS70PU
Fixes headset microphone detection on Clevo NS50PU and NS70PU.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220817135144.34103-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Wed, 17 Aug 2022 15:58:54 +0000 (08:58 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Most notably this drops the commits that trip up google cloud (turns
out, any legacy device).
Plus a kerneldoc patch"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: kerneldocs fixes and enhancements
virtio: Revert "virtio: find_vqs() add arg sizes"
virtio_vdpa: Revert "virtio_vdpa: support the arg sizes of find_vqs()"
virtio_pci: Revert "virtio_pci: support the arg sizes of find_vqs()"
virtio-mmio: Revert "virtio_mmio: support the arg sizes of find_vqs()"
virtio: Revert "virtio: add helper virtio_find_vqs_ctx_size()"
virtio_net: Revert "virtio_net: set the default max ring size by find_vqs()"
Josef Bacik [Wed, 3 Aug 2022 18:28:47 +0000 (14:28 -0400)]
btrfs: tree-checker: check for overlapping extent items
We're seeing a weird problem in production where we have overlapping
extent items in the extent tree. It's unclear where these are coming
from, and in debugging we realized there's no check in the tree checker
for this sort of problem. Add a check to the tree-checker to make sure
that the extents do not overlap each other.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 1 Aug 2022 13:57:52 +0000 (14:57 +0100)]
btrfs: fix warning during log replay when bumping inode link count
During log replay, at add_link(), we may increment the link count of
another inode that has a reference that conflicts with a new reference
for the inode currently being processed.
During log replay, at add_link(), we may drop (unlink) a reference from
some inode in the subvolume tree if that reference conflicts with a new
reference found in the log for the inode we are currently processing.
After the unlink, If the link count has decreased from 1 to 0, then we
increment the link count to prevent the inode from being deleted if it's
evicted by an iput() call, because we may have references to add to that
inode later on (and we will fixup its link count later during log replay).
However incrementing the link count from 0 to 1 triggers a warning:
$ cat fs/inode.c
(...)
void inc_nlink(struct inode *inode)
{
if (unlikely(inode->i_nlink == 0)) {
WARN_ON(!(inode->i_state & I_LINKABLE));
atomic_long_dec(&inode->i_sb->s_remove_count);
}
(...)
The I_LINKABLE flag is only set when creating an O_TMPFILE file, so it's
never set during log replay.
Most of the time, the warning isn't triggered even if we dropped the last
reference of the conflicting inode, and this is because:
1) The conflicting inode was previously marked for fixup, through a call
to link_to_fixup_dir(), which increments the inode's link count;
2) And the last iput() on the inode has not triggered eviction of the
inode, nor was eviction triggered after the iput(). So at add_link(),
even if we unlink the last reference of the inode, its link count ends
up being 1 and not 0.
So this means that if eviction is triggered after link_to_fixup_dir() is
called, at add_link() we will read the inode back from the subvolume tree
and have it with a correct link count, matching the number of references
it has on the subvolume tree. So if when we are at add_link() the inode
has exactly one reference only, its link count is 1, and after the unlink
its link count becomes 0.
So fix this by using set_nlink() instead of inc_nlink(), as the former
accepts a transition from 0 to 1 and it's what we use in other similar
contexts (like at link_to_fixup_dir().
Also make add_inode_ref() use set_nlink() instead of inc_nlink() to
bump the link count from 0 to 1.
The warning is actually harmless, but it may scare users. Josef also ran
into it recently.
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 1 Aug 2022 13:57:51 +0000 (14:57 +0100)]
btrfs: fix lost error handling when looking up extended ref on log replay
During log replay, when processing inode references, if we get an error
when looking up for an extended reference at __add_inode_ref(), we ignore
it and proceed, returning success (0) if no other error happens after the
lookup. This is obviously wrong because in case an extended reference
exists and it encodes some name not in the log, we need to unlink it,
otherwise the filesystem state will not match the state it had after the
last fsync.
So just make __add_inode_ref() return an error it gets from the extended
reference lookup.
Fixes:
f186373fef005c ("btrfs: extended inode refs")
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 26 Jul 2022 20:24:04 +0000 (16:24 -0400)]
btrfs: fix lockdep splat with reloc root extent buffers
We have been hitting the following lockdep splat with btrfs/187 recently
WARNING: possible circular locking dependency detected
5.19.0-rc8+ #775 Not tainted
------------------------------------------------------
btrfs/752500 is trying to acquire lock:
ffff97e1875a97b8 (btrfs-treloc-02#2){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110
but task is already holding lock:
ffff97e1875a9278 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (btrfs-tree-01/1){+.+.}-{3:3}:
down_write_nested+0x41/0x80
__btrfs_tree_lock+0x24/0x110
btrfs_init_new_buffer+0x7d/0x2c0
btrfs_alloc_tree_block+0x120/0x3b0
__btrfs_cow_block+0x136/0x600
btrfs_cow_block+0x10b/0x230
btrfs_search_slot+0x53b/0xb70
btrfs_lookup_inode+0x2a/0xa0
__btrfs_update_delayed_inode+0x5f/0x280
btrfs_async_run_delayed_root+0x24c/0x290
btrfs_work_helper+0xf2/0x3e0
process_one_work+0x271/0x590
worker_thread+0x52/0x3b0
kthread+0xf0/0x120
ret_from_fork+0x1f/0x30
-> #1 (btrfs-tree-01){++++}-{3:3}:
down_write_nested+0x41/0x80
__btrfs_tree_lock+0x24/0x110
btrfs_search_slot+0x3c3/0xb70
do_relocation+0x10c/0x6b0
relocate_tree_blocks+0x317/0x6d0
relocate_block_group+0x1f1/0x560
btrfs_relocate_block_group+0x23e/0x400
btrfs_relocate_chunk+0x4c/0x140
btrfs_balance+0x755/0xe40
btrfs_ioctl+0x1ea2/0x2c90
__x64_sys_ioctl+0x88/0xc0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #0 (btrfs-treloc-02#2){+.+.}-{3:3}:
__lock_acquire+0x1122/0x1e10
lock_acquire+0xc2/0x2d0
down_write_nested+0x41/0x80
__btrfs_tree_lock+0x24/0x110
btrfs_lock_root_node+0x31/0x50
btrfs_search_slot+0x1cb/0xb70
replace_path+0x541/0x9f0
merge_reloc_root+0x1d6/0x610
merge_reloc_roots+0xe2/0x260
relocate_block_group+0x2c8/0x560
btrfs_relocate_block_group+0x23e/0x400
btrfs_relocate_chunk+0x4c/0x140
btrfs_balance+0x755/0xe40
btrfs_ioctl+0x1ea2/0x2c90
__x64_sys_ioctl+0x88/0xc0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
other info that might help us debug this:
Chain exists of:
btrfs-treloc-02#2 --> btrfs-tree-01 --> btrfs-tree-01/1
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(btrfs-tree-01/1);
lock(btrfs-tree-01);
lock(btrfs-tree-01/1);
lock(btrfs-treloc-02#2);
*** DEADLOCK ***
7 locks held by btrfs/752500:
#0:
ffff97e292fdf460 (sb_writers#12){.+.+}-{0:0}, at: btrfs_ioctl+0x208/0x2c90
#1:
ffff97e284c02050 (&fs_info->reclaim_bgs_lock){+.+.}-{3:3}, at: btrfs_balance+0x55f/0xe40
#2:
ffff97e284c00878 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x236/0x400
#3:
ffff97e292fdf650 (sb_internal#2){.+.+}-{0:0}, at: merge_reloc_root+0xef/0x610
#4:
ffff97e284c02378 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x1a8/0x5a0
#5:
ffff97e284c023a0 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x1a8/0x5a0
#6:
ffff97e1875a9278 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110
stack backtrace:
CPU: 1 PID: 752500 Comm: btrfs Not tainted 5.19.0-rc8+ #775
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack_lvl+0x56/0x73
check_noncircular+0xd6/0x100
? lock_is_held_type+0xe2/0x140
__lock_acquire+0x1122/0x1e10
lock_acquire+0xc2/0x2d0
? __btrfs_tree_lock+0x24/0x110
down_write_nested+0x41/0x80
? __btrfs_tree_lock+0x24/0x110
__btrfs_tree_lock+0x24/0x110
btrfs_lock_root_node+0x31/0x50
btrfs_search_slot+0x1cb/0xb70
? lock_release+0x137/0x2d0
? _raw_spin_unlock+0x29/0x50
? release_extent_buffer+0x128/0x180
replace_path+0x541/0x9f0
merge_reloc_root+0x1d6/0x610
merge_reloc_roots+0xe2/0x260
relocate_block_group+0x2c8/0x560
btrfs_relocate_block_group+0x23e/0x400
btrfs_relocate_chunk+0x4c/0x140
btrfs_balance+0x755/0xe40
btrfs_ioctl+0x1ea2/0x2c90
? lock_is_held_type+0xe2/0x140
? lock_is_held_type+0xe2/0x140
? __x64_sys_ioctl+0x88/0xc0
__x64_sys_ioctl+0x88/0xc0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
This isn't necessarily new, it's just tricky to hit in practice. There
are two competing things going on here. With relocation we create a
snapshot of every fs tree with a reloc tree. Any extent buffers that
get initialized here are initialized with the reloc root lockdep key.
However since it is a snapshot, any blocks that are currently in cache
that originally belonged to the fs tree will have the normal tree
lockdep key set. This creates the lock dependency of
reloc tree -> normal tree
for the extent buffer locking during the first phase of the relocation
as we walk down the reloc root to relocate blocks.
However this is problematic because the final phase of the relocation is
merging the reloc root into the original fs root. This involves
searching down to any keys that exist in the original fs root and then
swapping the relocated block and the original fs root block. We have to
search down to the fs root first, and then go search the reloc root for
the block we need to replace. This creates the dependency of
normal tree -> reloc tree
which is why lockdep complains.
Additionally even if we were to fix this particular mismatch with a
different nesting for the merge case, we're still slotting in a block
that has a owner of the reloc root objectid into a normal tree, so that
block will have its lockdep key set to the tree reloc root, and create a
lockdep splat later on when we wander into that block from the fs root.
Unfortunately the only solution here is to make sure we do not set the
lockdep key to the reloc tree lockdep key normally, and then reset any
blocks we wander into from the reloc root when we're doing the merged.
This solves the problem of having mixed tree reloc keys intermixed with
normal tree keys, and then allows us to make sure in the merge case we
maintain the lock order of
normal tree -> reloc tree
We handle this by setting a bit on the reloc root when we do the search
for the block we want to relocate, and any block we search into or COW
at that point gets set to the reloc tree key. This works correctly
because we only ever COW down to the parent node, so we aren't resetting
the key for the block we're linking into the fs root.
With this patch we no longer have the lockdep splat in btrfs/187.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 26 Jul 2022 20:24:03 +0000 (16:24 -0400)]
btrfs: move lockdep class helpers to locking.c
These definitions exist in disk-io.c, which is not related to the
locking. Move this over to locking.h/c where it makes more sense.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Zixuan Fu [Thu, 21 Jul 2022 07:48:29 +0000 (15:48 +0800)]
btrfs: unset reloc control if transaction commit fails in prepare_to_relocate()
In btrfs_relocate_block_group(), the rc is allocated. Then
btrfs_relocate_block_group() calls
relocate_block_group()
prepare_to_relocate()
set_reloc_control()
that assigns rc to the variable fs_info->reloc_ctl. When
prepare_to_relocate() returns, it calls
btrfs_commit_transaction()
btrfs_start_dirty_block_groups()
btrfs_alloc_path()
kmem_cache_zalloc()
which may fail for example (or other errors could happen). When the
failure occurs, btrfs_relocate_block_group() detects the error and frees
rc and doesn't set fs_info->reloc_ctl to NULL. After that, in
btrfs_init_reloc_root(), rc is retrieved from fs_info->reloc_ctl and
then used, which may cause a use-after-free bug.
This possible bug can be triggered by calling btrfs_ioctl_balance()
before calling btrfs_ioctl_defrag().
To fix this possible bug, in prepare_to_relocate(), check if
btrfs_commit_transaction() fails. If the failure occurs,
unset_reloc_control() is called to set fs_info->reloc_ctl to NULL.
The error log in our fault-injection testing is shown as follows:
[ 58.751070] BUG: KASAN: use-after-free in btrfs_init_reloc_root+0x7ca/0x920 [btrfs]
...
[ 58.753577] Call Trace:
...
[ 58.755800] kasan_report+0x45/0x60
[ 58.756066] btrfs_init_reloc_root+0x7ca/0x920 [btrfs]
[ 58.757304] record_root_in_trans+0x792/0xa10 [btrfs]
[ 58.757748] btrfs_record_root_in_trans+0x463/0x4f0 [btrfs]
[ 58.758231] start_transaction+0x896/0x2950 [btrfs]
[ 58.758661] btrfs_defrag_root+0x250/0xc00 [btrfs]
[ 58.759083] btrfs_ioctl_defrag+0x467/0xa00 [btrfs]
[ 58.759513] btrfs_ioctl+0x3c95/0x114e0 [btrfs]
...
[ 58.768510] Allocated by task 23683:
[ 58.768777] ____kasan_kmalloc+0xb5/0xf0
[ 58.769069] __kmalloc+0x227/0x3d0
[ 58.769325] alloc_reloc_control+0x10a/0x3d0 [btrfs]
[ 58.769755] btrfs_relocate_block_group+0x7aa/0x1e20 [btrfs]
[ 58.770228] btrfs_relocate_chunk+0xf1/0x760 [btrfs]
[ 58.770655] __btrfs_balance+0x1326/0x1f10 [btrfs]
[ 58.771071] btrfs_balance+0x3150/0x3d30 [btrfs]
[ 58.771472] btrfs_ioctl_balance+0xd84/0x1410 [btrfs]
[ 58.771902] btrfs_ioctl+0x4caa/0x114e0 [btrfs]
...
[ 58.773337] Freed by task 23683:
...
[ 58.774815] kfree+0xda/0x2b0
[ 58.775038] free_reloc_control+0x1d6/0x220 [btrfs]
[ 58.775465] btrfs_relocate_block_group+0x115c/0x1e20 [btrfs]
[ 58.775944] btrfs_relocate_chunk+0xf1/0x760 [btrfs]
[ 58.776369] __btrfs_balance+0x1326/0x1f10 [btrfs]
[ 58.776784] btrfs_balance+0x3150/0x3d30 [btrfs]
[ 58.777185] btrfs_ioctl_balance+0xd84/0x1410 [btrfs]
[ 58.777621] btrfs_ioctl+0x4caa/0x114e0 [btrfs]
...
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Zixuan Fu <r33s3n6@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Amadeusz Sławiński [Wed, 17 Aug 2022 12:49:24 +0000 (14:49 +0200)]
ALSA: info: Fix llseek return value when using callback
When using callback there was a flow of
ret = -EINVAL
if (callback) {
offset = callback();
goto out;
}
...
offset = some other value in case of no callback;
ret = offset;
out:
return ret;
which causes the snd_info_entry_llseek() to return -EINVAL when there is
callback handler. Fix this by setting "ret" directly to callback return
value before jumping to "out".
Fixes:
73029e0ff18d ("ALSA: info - Implement common llseek for binary mode")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220817124924.3974577-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Florian Westphal [Tue, 16 Aug 2022 12:15:22 +0000 (14:15 +0200)]
testing: selftests: nft_flowtable.sh: rework test to detect offload failure
This test fails on current kernel releases because the flotwable path
now calls dst_check from packet path and will then remove the offload.
Test script has two purposes:
1. check that file (random content) can be sent to other netns (and vv)
2. check that the flow is offloaded (rather than handled by classic
forwarding path).
Since dst_check is in place, 2) fails because the nftables ruleset in
router namespace 1 intentionally blocks traffic under the assumption
that packets are not passed via classic path at all.
Rework this: Instead of blocking traffic, create two named counters, one
for original and one for reverse direction.
The first three test cases are handled by classic forwarding path
(path mtu discovery is disabled and packets exceed MTU).
But all other tests enable PMTUD, so the originator and responder are
expected to lower packet size and flowtable is expected to do the packet
forwarding.
For those tests, check that the packet counters (which are only
incremented for packets that are passed up to classic forward path)
are significantly lower than the file size transferred.
I've tested that the counter-checks fail as expected when the 'flow add'
statement is removed from the ruleset.
Signed-off-by: Florian Westphal <fw@strlen.de>
Stefan Binding [Tue, 16 Aug 2022 15:19:01 +0000 (16:19 +0100)]
ALSA: hda/cs8409: Support new Dolphin Variants
Add 4 new Dolphin Systems, same configuration as older systems.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220816151901.1398007-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oliver Upton [Tue, 16 Aug 2022 19:25:54 +0000 (19:25 +0000)]
KVM: arm64: Reject 32bit user PSTATE on asymmetric systems
KVM does not support AArch32 EL0 on asymmetric systems. To that end,
prevent userspace from configuring a vCPU in such a state through
setting PSTATE.
It is already ABI that KVM rejects such a write on a system where
AArch32 EL0 is unsupported. Though the kernel's definition of a 32bit
system changed in commit
2122a833316f ("arm64: Allow mismatched
32-bit EL0 support"), KVM's did not.
Fixes:
2122a833316f ("arm64: Allow mismatched 32-bit EL0 support")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220816192554.1455559-3-oliver.upton@linux.dev
Oliver Upton [Tue, 16 Aug 2022 19:25:53 +0000 (19:25 +0000)]
KVM: arm64: Treat PMCR_EL1.LC as RES1 on asymmetric systems
KVM does not support AArch32 on asymmetric systems. To that end, enforce
AArch64-only behavior on PMCR_EL1.LC when on an asymmetric system.
Fixes:
2122a833316f ("arm64: Allow mismatched 32-bit EL0 support")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220816192554.1455559-2-oliver.upton@linux.dev
David S. Miller [Wed, 17 Aug 2022 09:25:29 +0000 (10:25 +0100)]
Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue
====================
Intel Wired LAN Driver Updates 2022-08-16)
This series contains updates to i40e driver only.
Przemyslaw fixes issue with checksum offload on VXLAN tunnels.
Alan disables VSI for Tx timeout when all recovery methods have failed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 16 Aug 2022 00:23:58 +0000 (17:23 -0700)]
tls: rx: react to strparser initialization errors
Even though the normal strparser's init function has a return
value we got away with ignoring errors until now, as it only
validates the parameters and we were passing correct parameters.
tls_strp can fail to init on memory allocation errors, which
syzbot duly induced and reported.
Reported-by: syzbot+abd45eb849b05194b1b6@syzkaller.appspotmail.com
Fixes:
84c61fe1a75b ("tls: rx: do not use the standard strparser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lucas Tanure [Wed, 27 Jul 2022 09:59:24 +0000 (10:59 +0100)]
platform/x86: serial-multi-instantiate: Add CLSA0101 Laptop
The device CLSA0101 has two instances of CS35L41
connected by I2C.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220727095924.80884-5-tanureal@opensource.cirrus.com
Link: https://lore.kernel.org/r/20220816194639.13870-1-cam@neo-zeon.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Florian Westphal [Tue, 16 Aug 2022 12:15:21 +0000 (14:15 +0200)]
testing: selftests: nft_flowtable.sh: use random netns names
"ns1" is a too generic name, use a random suffix to avoid
errors when such a netns exists. Also allows to run multiple
instances of the script in parallel.
Signed-off-by: Florian Westphal <fw@strlen.de>
Geert Uytterhoeven [Mon, 15 Aug 2022 10:39:20 +0000 (12:39 +0200)]
netfilter: conntrack: NF_CONNTRACK_PROCFS should no longer default to y
NF_CONNTRACK_PROCFS was marked obsolete in commit
54b07dca68557b09
("netfilter: provide config option to disable ancient procfs parts") in
v3.3.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Matt Roper [Tue, 16 Aug 2022 21:06:01 +0000 (14:06 -0700)]
drm/i915/dg2: Add additional tuning settings
Some additional MMIO tuning settings have appeared in the bspec's
performance tuning guide section.
One of the tuning settings here is also documented as formal workaround
Wa_22012654132 for some steppings of DG2. However the tuning setting
applies to all DG2 variants and steppings, making it a superset of the
workaround.
v2:
- Move DRAW_WATERMARK to engine workaround section. It only moves into
the engine context on future platforms. (Lucas)
- CHICKEN_RASTER_2 needs to be handled as a masked register. (Lucas)
Bspec: 68331
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816210601.2041572-2-matthew.d.roper@intel.com
Matt Roper [Tue, 16 Aug 2022 21:06:00 +0000 (14:06 -0700)]
drm/i915/gt: Add dedicated function for non-ctx register tuning settings
The bspec performance tuning section gives recommended settings that the
driver should program for various MMIO registers. Although these
settings aren't "workarounds" we use the workaround infrastructure to do
this programming to make sure it is handled at the appropriate places
and doesn't conflict with any real workarounds.
Since more of these are starting to show up on recent platforms, it's a
good time to create a dedicated function to hold them so that there's
less ambiguity about how/where to implement new ones.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816210601.2041572-1-matthew.d.roper@intel.com
Zhengchao Shao [Mon, 15 Aug 2022 03:08:48 +0000 (11:08 +0800)]
net: sched: fix misuse of qcpu->backlog in gnet_stats_add_queue_cpu
In the gnet_stats_add_queue_cpu function, the qstats->qlen statistics
are incorrectly set to qcpu->backlog.
Fixes:
448e163f8b9b ("gen_stats: Add gnet_stats_add_queue()")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20220815030848.276746-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew Jones [Tue, 16 Aug 2022 16:30:58 +0000 (18:30 +0200)]
riscv: Ensure isa-ext static keys are writable
riscv_isa_ext_keys[] is an array of static keys used in the unified
ISA extension framework. The keys added to this array may be used
anywhere, including in modules. Ensure the keys remain writable by
placing them in the data section.
The need to change riscv_isa_ext_keys[]'s section was found when the
kvm module started failing to load. Commit
8eb060e10185 ("arch/riscv:
add Zihintpause support") adds a static branch check for a newly
added isa-ext key to cpu_relax(), which kvm uses.
Fixes:
c360cbec3511 ("riscv: introduce unified static key mechanism for ISA extensions")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Cc: stable@vger.kernel.org
Reported-by: Ron Economos <re@w6rz.net>
Reported-by: Anup Patel <apatel@ventanamicro.com>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220816163058.3004536-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Michel Dänzer [Tue, 16 Aug 2022 08:44:10 +0000 (10:44 +0200)]
Revert "drm/amd/amdgpu: add pipe1 hardware support"
This reverts commit
4c7631800e6bf0eced08dd7b4f793fcd972f597d.
Triggered GFX hangs with GNOME Wayland on Navi 21.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2117
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MaĂra Canal [Mon, 15 Aug 2022 11:39:31 +0000 (08:39 -0300)]
drm/amdgpu: Fix use-after-free on amdgpu_bo_list mutex
If amdgpu_cs_vm_handling returns r != 0, then it will unlock the
bo_list_mutex inside the function amdgpu_cs_vm_handling and again on
amdgpu_cs_parser_fini. This problem results in the following
use-after-free problem:
[ 220.280990] ------------[ cut here ]------------
[ 220.281000] refcount_t: underflow; use-after-free.
[ 220.281019] WARNING: CPU: 1 PID: 3746 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110
[ 220.281029] ------------[ cut here ]------------
[ 220.281415] CPU: 1 PID: 3746 Comm: chrome:cs0 Tainted: G W L ------- --- 5.20.0-0.rc0.20220812git7ebfc85e2cd7.10.fc38.x86_64 #1
[ 220.281421] Hardware name: System manufacturer System Product Name/ROG STRIX X570-I GAMING, BIOS 4403 04/27/2022
[ 220.281426] RIP: 0010:refcount_warn_saturate+0xba/0x110
[ 220.281431] Code: 01 01 e8 79 4a 6f 00 0f 0b e9 42 47 a5 00 80 3d de
7e be 01 00 75 85 48 c7 c7 f8 98 8e 98 c6 05 ce 7e be 01 01 e8 56 4a
6f 00 <0f> 0b e9 1f 47 a5 00 80 3d b9 7e be 01 00 0f 85 5e ff ff ff 48
c7
[ 220.281437] RSP: 0018:
ffffb4b0d18d7a80 EFLAGS:
00010282
[ 220.281443] RAX:
0000000000000026 RBX:
0000000000000003 RCX:
0000000000000000
[ 220.281448] RDX:
0000000000000001 RSI:
ffffffff988d06dc RDI:
00000000ffffffff
[ 220.281452] RBP:
00000000ffffffff R08:
0000000000000000 R09:
ffffb4b0d18d7930
[ 220.281457] R10:
0000000000000003 R11:
ffffa0672e2fffe8 R12:
ffffa058ca360400
[ 220.281461] R13:
ffffa05846c50a18 R14:
00000000fffffe00 R15:
0000000000000003
[ 220.281465] FS:
00007f82683e06c0(0000) GS:
ffffa066e2e00000(0000) knlGS:
0000000000000000
[ 220.281470] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 220.281475] CR2:
00003590005cc000 CR3:
00000001fca46000 CR4:
0000000000350ee0
[ 220.281480] Call Trace:
[ 220.281485] <TASK>
[ 220.281490] amdgpu_cs_ioctl+0x4e2/0x2070 [amdgpu]
[ 220.281806] ? amdgpu_cs_find_mapping+0xe0/0xe0 [amdgpu]
[ 220.282028] drm_ioctl_kernel+0xa4/0x150
[ 220.282043] drm_ioctl+0x21f/0x420
[ 220.282053] ? amdgpu_cs_find_mapping+0xe0/0xe0 [amdgpu]
[ 220.282275] ? lock_release+0x14f/0x460
[ 220.282282] ? _raw_spin_unlock_irqrestore+0x30/0x60
[ 220.282290] ? _raw_spin_unlock_irqrestore+0x30/0x60
[ 220.282297] ? lockdep_hardirqs_on+0x7d/0x100
[ 220.282305] ? _raw_spin_unlock_irqrestore+0x40/0x60
[ 220.282317] amdgpu_drm_ioctl+0x4a/0x80 [amdgpu]
[ 220.282534] __x64_sys_ioctl+0x90/0xd0
[ 220.282545] do_syscall_64+0x5b/0x80
[ 220.282551] ? futex_wake+0x6c/0x150
[ 220.282568] ? lock_is_held_type+0xe8/0x140
[ 220.282580] ? do_syscall_64+0x67/0x80
[ 220.282585] ? lockdep_hardirqs_on+0x7d/0x100
[ 220.282592] ? do_syscall_64+0x67/0x80
[ 220.282597] ? do_syscall_64+0x67/0x80
[ 220.282602] ? lockdep_hardirqs_on+0x7d/0x100
[ 220.282609] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 220.282616] RIP: 0033:0x7f8282a4f8bf
[ 220.282639] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10
00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00
0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00
00
[ 220.282644] RSP: 002b:
00007f82683df410 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[ 220.282651] RAX:
ffffffffffffffda RBX:
00007f82683df588 RCX:
00007f8282a4f8bf
[ 220.282655] RDX:
00007f82683df4d0 RSI:
00000000c0186444 RDI:
0000000000000018
[ 220.282659] RBP:
00007f82683df4d0 R08:
00007f82683df5e0 R09:
00007f82683df4b0
[ 220.282663] R10:
00001d04000a0600 R11:
0000000000000246 R12:
00000000c0186444
[ 220.282667] R13:
0000000000000018 R14:
00007f82683df588 R15:
0000000000000003
[ 220.282689] </TASK>
[ 220.282693] irq event stamp: 6232311
[ 220.282697] hardirqs last enabled at (6232319): [<
ffffffff9718cd7e>] __up_console_sem+0x5e/0x70
[ 220.282704] hardirqs last disabled at (6232326): [<
ffffffff9718cd63>] __up_console_sem+0x43/0x70
[ 220.282709] softirqs last enabled at (6232072): [<
ffffffff970ff669>] __irq_exit_rcu+0xf9/0x170
[ 220.282716] softirqs last disabled at (6232061): [<
ffffffff970ff669>] __irq_exit_rcu+0xf9/0x170
[ 220.282722] ---[ end trace
0000000000000000 ]---
Therefore, remove the mutex_unlock from the amdgpu_cs_vm_handling
function, so that amdgpu_cs_submit and amdgpu_cs_parser_fini can handle
the unlock.
Fixes:
90af0ca047f3 ("drm/amdgpu: Protect the amdgpu_bo_list list with a mutex v2")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: MaĂra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mukul Joshi [Fri, 12 Aug 2022 19:23:51 +0000 (15:23 -0400)]
drm/amdgpu: Fix interrupt handling on ih_soft ring
There are no backing hardware registers for ih_soft ring.
As a result, don't try to access hardware registers for read
and write pointers when processing interrupts on the IH soft
ring.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shane Xiao [Mon, 15 Aug 2022 08:32:15 +0000 (16:32 +0800)]
drm/amdgpu: Add secure display TA load for Renoir
Add secure display TA load for Renoir
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Thu, 4 Aug 2022 18:42:47 +0000 (14:42 -0400)]
drm/amd/display: Include scaling factor for SubVP command
[Description]
For SubVP scaling cases, we must include the scaling
info as part of the cmd. This is required when converting
OTG line to HUBP line for the MALL_START_LINE programming.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Khalid Masum [Mon, 15 Aug 2022 18:34:25 +0000 (00:34 +0600)]
drm/amdgpu/vcn: Return void from the stop_dbg_mode
There is no point in returning an int here. It only returns 0 which
the caller never uses. Therefore return void and remove the unnecessary
assignment.
Addresses-Coverity: 1504988 ("Unused value")
Fixes:
8da1170a16e4 ("drm/amdgpu: add VCN4 ip block support")
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Suggested-by: Ruijing Dong <ruijing.dong@amd.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrey Strachuk [Tue, 19 Jul 2022 10:39:54 +0000 (13:39 +0300)]
drm/amdgpu: remove useless condition in amdgpu_job_stop_all_jobs_on_sched()
Local variable 'rq' is initialized by an address
of field of drm_sched_job, so it does not make
sense to compare 'rq' with NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Andrey Strachuk <strochuk@ispras.ru>
Fixes:
7c6e68c777f1 ("drm/amdgpu: Avoid HW GPU reset for RAS.")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harish Kasiviswanathan [Fri, 5 Aug 2022 22:04:08 +0000 (18:04 -0400)]
drm/amdgpu: Add decode_iv_ts helper for ih_v6 block
Was missing. Add it.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samson Tam [Mon, 25 Jul 2022 18:04:26 +0000 (14:04 -0400)]
drm/amd/display: add chip revision to DCN32
[Why & How]
Add GC_11_0_3_A0 as a chip revision to the DCN32 family
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Fri, 5 Aug 2022 16:59:47 +0000 (12:59 -0400)]
drm/amd/display: avoid doing vm_init multiple time
[why]
this is to ensure that driver will not reprogram hvm_prefetch_req again if
it is done.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Sat, 6 Aug 2022 16:00:26 +0000 (12:00 -0400)]
drm/amd/display: Use pitch when calculating size to cache in MALL
[Description]
Use pitch when calculating size to cache in MALL
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Fri, 5 Aug 2022 20:18:31 +0000 (16:18 -0400)]
drm/amd/display: Don't set DSC for phantom pipes
[Description]
Don't set DSC bit for phantom pipes, not
required since phantom pipe don't have
any actual output
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Fri, 5 Aug 2022 16:02:10 +0000 (12:02 -0400)]
drm/amd/display: Update clock table policy for DCN314
[Why & How]
Depending on how the clock table is constructed from PMFW we can run
into issues where we don't think we have enough bandwidth available
due to FCLK too low - eg. when the FCLK table contains invalid entries
or a single entry.
We should always pick up the maximum clocks for each state as a final
state in this case to prevent validation from failing if the table is
malformed.
We should also contain sensible defaults in the case where values
are invalid.
Redfine the clock table structures by adding a 314 prefix to make
debugging these issues easier by avoiding symbol name clashes.
Overall this policy more closely aligns to how we did things for 315,
but because of how the voltage rail is setup we should favor keeping
DCFCLK low rather than DISPCLK or DPPCLK - so use the max for those
in every entry.
Reviewed-by: Daniel Miess <daniel.miess@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chaitanya Dhere [Wed, 27 Jul 2022 19:48:30 +0000 (15:48 -0400)]
drm/amd/display: Modify header inclusion pattern
[Why]
Recent backport from opensource broke the Nightly tool build
that tests DC and DML for bugs and regressions. This was
because the backport had a header inclusion that was not
consistent with the AMD style of including headers was allowed
to be merged back in DML code that caused tool compilation
failures.
[How]
Modify the way in which the header file in included so that it
is consistent with AMD style of including headers. This then
automatically fixes the tool compilation process and also
helps maintain the code quality and consistency.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom Chung [Wed, 3 Aug 2022 07:15:17 +0000 (15:15 +0800)]
drm/amd/display: Fix plug/unplug external monitor will hang while playback MPO video
[Why]
Pipes for MPO primary and overlay will be power down and power up during
plug/unplug external monitor while MPO video playback.
But the pipes were the same after plug/unplug and should not need to be
power down and power up or it will make page flip interrupt disabled and
cause hang issue.
[How]
Add pipe split change condition that not only check the top pipe pointer
but also check the index of top pipe if both top pipes are available.
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Miess [Tue, 2 Aug 2022 20:53:47 +0000 (16:53 -0400)]
drm/amd/display: Add debug parameter to retain default clock table
[Why]
Need a way to retain default clock table to aid
the investigation into why 8k@30 display not
lighting up on dcn314
[How]
Use flag to prevent execution of bw_params helper
function and function for updating bw_bounding_box
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dusica Milinkovic [Wed, 10 Aug 2022 07:43:15 +0000 (09:43 +0200)]
drm/amdgpu: Increase tlb flush timeout for sriov
[Why]
During multi-vf executing benchmark (Luxmark) observed kiq error timeout.
It happenes because all of VFs do the tlb invalidation at the same time.
Although each VF has the invalidate register set, from hardware side
the invalidate requests are queue to execute.
[How]
In case of 12 VF increase timeout on 12*100ms
Signed-off-by: Dusica Milinkovic <Dusica.Milinkovic@amd.com>
Acked-by: Shaoyun Liu <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Josip Pavic [Fri, 29 Jul 2022 15:08:09 +0000 (11:08 -0400)]
drm/amd/display: do not compare integers of different widths
[Why & How]
Increase width of some variables to avoid comparing integers of
different widths.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ian Chen [Tue, 2 Aug 2022 07:13:37 +0000 (15:13 +0800)]
drm/amd/display: Add reserved dc_log_type.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ilya Bakoulin [Tue, 26 Jul 2022 20:19:38 +0000 (16:19 -0400)]
drm/amd/display: Fix pixel clock programming
[Why]
Some pixel clock values could cause HDMI TMDS SSCPs to be misaligned
between different HDMI lanes when using YCbCr420 10-bit pixel format.
BIOS functions for transmitter/encoder control take pixel clock in kHz
increments, whereas the function for setting the pixel clock is in 100Hz
increments. Setting pixel clock to a value that is not on a kHz boundary
will cause the issue.
[How]
Round pixel clock down to nearest kHz in 10/12-bpc cases.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Tue, 2 Aug 2022 00:17:54 +0000 (20:17 -0400)]
drm/amd/display: 3.2.198
This version brings along following fixes:
-Fix edp panel missing event
-Set ARGB16161616 pixel format to 26
-Fix dcn32 interger issue
-Clear optc underflow bit after ODM clock off
-Fix issue with stereo3D
-Fix DML2 lightup issue
-Correct DTBCLK for dcn314
-Revert for a regression
-Fix clocks and bugs in DML2
-Enable SubVP by defalut on DCN32 & DCN321
-Corret boundary condition for engin ID on DCN303
-Fix FRL encoder override registry key
-Fix VPG for dcn314 HPO
-Fix Linux compile-time warning
-Add new prefetch modes in DML for DCN32
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ethan Wellenreiter [Fri, 29 Jul 2022 17:45:51 +0000 (13:45 -0400)]
drm/amd/display: reverted limiting vscsdp_for_colorimetry and ARGB16161616 pixel format addition
[WHY]
Limiting vscsdp_for_colorimetry for YCbCr420/BT2020 resulted in red/green
point failures in HDR10 DTN tests. The re-implementation of ARGB16161616
was to fix this however it did not actually fix this issue but a side effect of the
issue.
[HOW]
Change ARGB16161616 pixel format to 26.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Fri, 12 Aug 2022 03:37:37 +0000 (11:37 +0800)]
drm/amd/pm: Enable GFXOFF feature for SMU IP v13.0.4
The driver needs to set EnableGfxImu message parameter to tell the PMFW
to set the flag that enables the GFXOFF feature.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Fri, 29 Jul 2022 07:22:44 +0000 (15:22 +0800)]
drm/amdgpu: enable IH Clock Gating for OSS IP v6.0.1
Enable AMD_CG_SUPPORT_IH_CG support.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Fri, 12 Aug 2022 06:20:58 +0000 (09:20 +0300)]
drm/amdkfd: potential crash in kfd_create_indirect_link_prop()
This code has two bugs. If kfd_topology_device_by_proximity_domain()
failed on the first iteration through the loop then "cpu_link" is
uninitialized and should not be dereferenced.
The second bug is that we cannot dereference a list iterator when it
points to the list head. In other words, if we exit the
list_for_each_entry() loop exits without hitting a break then "cpu_link"
is not a valid pointer and should not be dereferenced.
Fix both of these problems by setting "cpu_link" to NULL when it is invalid
and non-NULL when it is valid. That makes it easier to test for
valid vs invalid.
Fixes:
0f28cca87e9a ("drm/amdkfd: Extend KFD device topology to surface peer-to-peer links")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yifan Zhang [Wed, 10 Aug 2022 14:09:36 +0000 (22:09 +0800)]
drm/amdkfd: reserve 2 queues for sdma 6.0.1 in bitmap
There is only one engine in sdma 6.0.1, the total number of
reserved queues should be 2, reflect this number in bitmap as well.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Fri, 29 Jul 2022 07:21:08 +0000 (15:21 +0800)]
drm/amdgpu: enable ATHUB IP v3.0.1 Clock Gating
Enable AMD_CG_SUPPORT_ATHUB_MGCG and AMD_CG_SUPPORT_ATHUB_LS support.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Fri, 29 Jul 2022 07:18:10 +0000 (15:18 +0800)]
drm/amdgpu: enable HDP IP v5.2.1 Clock Gating
Enable AMD_CG_SUPPORT_HDP_MGCG and AMD_CG_SUPPORT_HDP_LS support.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Fri, 29 Jul 2022 07:13:03 +0000 (15:13 +0800)]
drm/amdgpu: enable MMHUB IP v3.0.1 Clock Gating
Enable AMD_CG_SUPPORT_MC_MGCG and AMD_CG_SUPPORT_MC_LS support.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Tue, 9 Aug 2022 08:26:05 +0000 (16:26 +0800)]
drm/amdgpu: add ATHUB IP v3.0.1 Clock Gating support
Add ATHUB IP v3.0.1 in athub_v3_0_set_clockgating.
The regATHUB_MISC_CNTL has different offset for ATHUB IP v3.0.1,
so need to add IP version checking to use the right REG offset.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Tue, 9 Aug 2022 10:59:49 +0000 (18:59 +0800)]
drm/amdgpu: add HDP IP v5.2.1 Clock Gating support
Add set/get_clockgating for HDP IP v5.2.1.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Tue, 9 Aug 2022 09:46:39 +0000 (17:46 +0800)]
drm/amdgpu: add MMHUB IP v3.0.1 Clock Gating support
Add set/get_clockgating for MMHUB IP v3.0.1.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Tue, 9 Aug 2022 06:42:46 +0000 (14:42 +0800)]
drm/amd/pm: update the smu driver interface version for SMU IP v13.0.4
The pmfw has changed the driver interface version, so keep same with the
fw.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Mon, 8 Aug 2022 21:00:38 +0000 (17:00 -0400)]
drm/amdkfd: Fix mm reference in SVM eviction worker
Use the mm reference from the fence. This allows removing the
svm_bo->svms pointer, which was problematic because we cannot assume
that the struct kfd_process containing the svms is still allocated
without holding a refcount on the process.
Use mmget_not_zero to ensure the mm is still valid, and drop the svm_bo
reference if it isn't.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Thu, 11 Aug 2022 08:38:52 +0000 (16:38 +0800)]
drm/amd/pm: add mode1 support on smu_v13_0_7
add mode1 support since it's missing on smu_v13_0_7
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Thu, 11 Aug 2022 01:48:00 +0000 (09:48 +0800)]
drm/amd/amdgpu: add ih cg and hdp sd on smu_v13_0_7
add ih cg and hdp sd on smu_v13_0_7
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 10 Aug 2022 03:11:16 +0000 (11:11 +0800)]
drm/amd/pm: add missing ->fini_xxxx interfaces for some SMU13 asics
Without these, potential memory leak may be induced.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 10 Aug 2022 03:08:31 +0000 (11:08 +0800)]
drm/amd/pm: add missing ->fini_microcode interface for Sienna Cichlid
To avoid any potential memory leak.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 3 Aug 2022 08:13:56 +0000 (16:13 +0800)]
drm/amdgpu: disable 3DCGCG/CGLS temporarily due to stability issue
Some stability issues were reported with these features.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrew Donnellan [Tue, 16 Aug 2022 05:17:20 +0000 (15:17 +1000)]
gcc-plugins: Undefine LATENT_ENTROPY_PLUGIN when plugin disabled for a file
Commit
36d4b36b6959 ("lib/nodemask: inline next_node_in() and
node_random()") refactored some code by moving node_random() from
lib/nodemask.c to include/linux/nodemask.h, thus requiring nodemask.h to
include random.h, which conditionally defines add_latent_entropy()
depending on whether the macro LATENT_ENTROPY_PLUGIN is defined.
This broke the build on powerpc, where nodemask.h is indirectly included
in arch/powerpc/kernel/prom_init.c, part of the early boot machinery that
is excluded from the latent entropy plugin using
DISABLE_LATENT_ENTROPY_PLUGIN. It turns out that while we add a gcc flag
to disable the actual plugin, we don't undefine LATENT_ENTROPY_PLUGIN.
This leads to the following:
CC arch/powerpc/kernel/prom_init.o
In file included from ./include/linux/nodemask.h:97,
from ./include/linux/mmzone.h:17,
from ./include/linux/gfp.h:7,
from ./include/linux/xarray.h:15,
from ./include/linux/radix-tree.h:21,
from ./include/linux/idr.h:15,
from ./include/linux/kernfs.h:12,
from ./include/linux/sysfs.h:16,
from ./include/linux/kobject.h:20,
from ./include/linux/pci.h:35,
from arch/powerpc/kernel/prom_init.c:24:
./include/linux/random.h: In function 'add_latent_entropy':
./include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
| ^~~~~~~~~~~~~~
| add_latent_entropy
./include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
make[2]: *** [scripts/Makefile.build:249: arch/powerpc/kernel/prom_init.o] Fehler 1
make[1]: *** [scripts/Makefile.build:465: arch/powerpc/kernel] Fehler 2
make: *** [Makefile:1855: arch/powerpc] Error 2
Change the DISABLE_LATENT_ENTROPY_PLUGIN flags to undefine
LATENT_ENTROPY_PLUGIN for files where the plugin is disabled.
Cc: Yury Norov <yury.norov@gmail.com>
Fixes:
38addce8b600 ("gcc-plugins: Add latent_entropy plugin")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216367
Link: https://lore.kernel.org/linuxppc-dev/alpine.DEB.2.22.394.2208152006320.289321@ramsan.of.borg/
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220816051720.44108-1-ajd@linux.ibm.com
Kees Cook [Tue, 16 Aug 2022 19:14:54 +0000 (12:14 -0700)]
LoadPin: Return EFAULT on copy_from_user() failures
The copy_from_user() function returns the number of bytes remaining to
be copied on a failure. Such failures should return -EFAULT to high
levels.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
3f805f8cc23b ("LoadPin: Enable loading from trusted dm-verity devices")
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Fabio M. De Francesco [Wed, 3 Aug 2022 18:28:56 +0000 (20:28 +0200)]
exec: Replace kmap{,_atomic}() with kmap_local_page()
The use of kmap() and kmap_atomic() are being deprecated in favor of
kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap’s pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and are still valid.
Since the use of kmap_local_page() in exec.c is safe, it should be
preferred everywhere in exec.c.
As said, since kmap_local_page() can be also called from atomic context,
and since remove_arg_zero() doesn't (and shouldn't ever) rely on an
implicit preempt_disable(), this function can also safely replace
kmap_atomic().
Therefore, replace kmap() and kmap_atomic() with kmap_local_page() in
fs/exec.c.
Tested with xfstests on a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel
with HIGHMEM64GB enabled.
Cc: Eric W. Biederman <ebiederm@xmission.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220803182856.28246-1-fmdefrancesco@gmail.com
Linus Torvalds [Tue, 16 Aug 2022 18:42:11 +0000 (11:42 -0700)]
Merge tag 'nios2_fixes_v6.0' of git://git./linux/kernel/git/dinguyen/linux
Pull NIOS2 fixes from Dinh Nguyen:
- Security fixes from Al Viro
* tag 'nios2_fixes_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
nios2: add force_successful_syscall_return()
nios2: restarts apply only to the first sigframe we build...
nios2: fix syscall restart checks
nios2: traced syscall does need to check the syscall number
nios2: don't leave NULLs in sys_call_table[]
nios2: page fault et.al. are *not* restartable syscalls...
Linus Torvalds [Tue, 16 Aug 2022 18:40:15 +0000 (11:40 -0700)]
Merge tag 'spi-fix-v6.0-rc1' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fixes that came in since my pull request, the Meson fix is a
little large since it's fixing all possible cases of the problem that
was observed with the driver and clock API trying to share
configuration by integrating the device clocking fully with the clock
API rather than spot fixing the one instance that was observed"
* tag 'spi-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: Drop Pratyush Yadav
spi: meson-spicc: add local pow2 clock ops to preserve rate between messages
MAINTAINERS: rectify entry for ARM/HPE GXP ARCHITECTURE
spi: spi.c: Add missing __percpu annotations in users of spi_statistics
Linus Torvalds [Tue, 16 Aug 2022 18:36:38 +0000 (11:36 -0700)]
Merge tag 'regulator-fix-v6.0-rc1' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small fixes that came in since my pull request, nothing
major here"
* tag 'regulator-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Fix missing error return from regulator_bulk_get()
regulator: pca9450: Remove restrictions for regulator-name
Linus Torvalds [Sun, 14 Aug 2022 21:16:13 +0000 (14:16 -0700)]
x86: simplify load_unaligned_zeropad() implementation
The exception for the "unaligned access at the end of the page, next
page not mapped" never happens, but the fixup code ends up causing
trouble for compilers to optimize well.
clang in particular ends up seeing it being in the middle of a loop, and
tries desperately to optimize the exception fixup code that is never
really reached.
The simple solution is to just move all the fixups into the exception
handler itself, which moves it all out of the hot case code, and means
that the compiler never sees it or needs to worry about it.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hector Martin [Tue, 16 Aug 2022 07:03:11 +0000 (16:03 +0900)]
locking/atomic: Make test_and_*_bit() ordered on failure
These operations are documented as always ordered in
include/asm-generic/bitops/instrumented-atomic.h, and producer-consumer
type use cases where one side needs to ensure a flag is left pending
after some shared data was updated rely on this ordering, even in the
failure case.
This is the case with the workqueue code, which currently suffers from a
reproducible ordering violation on Apple M1 platforms (which are
notoriously out-of-order) that ends up causing the TTY layer to fail to
deliver data to userspace properly under the right conditions. This
change fixes that bug.
Change the documentation to restrict the "no order on failure" story to
the _lock() variant (for which it makes sense), and remove the
early-exit from the generic implementation, which is what causes the
missing barrier semantics in that case. Without this, the remaining
atomic op is fully ordered (including on ARM64 LSE, as of recent
versions of the architecture spec).
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes:
e986a0d6cb36 ("locking/atomics, asm-generic/bitops/atomic.h: Rewrite using atomic_*() APIs")
Fixes:
61e02392d3c7 ("locking/atomic/bitops: Document and clarify ordering semantics for failed test_and_{}_bit()")
Signed-off-by: Hector Martin <marcan@marcan.st>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Brady [Tue, 2 Aug 2022 08:19:17 +0000 (10:19 +0200)]
i40e: Fix to stop tx_timeout recovery if GLOBR fails
When a tx_timeout fires, the PF attempts to recover by incrementally
resetting. First we try a PFR, then CORER and finally a GLOBR. If the
GLOBR fails, then we keep hitting the tx_timeout and incrementing the
recovery level and issuing dmesgs, which is both annoying to the user
and accomplishes nothing.
If the GLOBR fails, then we're pretty much totally hosed, and there's
not much else we can do to recover, so this makes it such that we just
kill the VSI and stop hitting the tx_timeout in such a case.
Fixes:
41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Przemyslaw Patynowski [Wed, 27 Jul 2022 09:19:40 +0000 (11:19 +0200)]
i40e: Fix tunnel checksum offload with fragmented traffic
Fix checksum offload on VXLAN tunnels.
In case, when mpls protocol is not used, set l4 header to transport
header of skb. This fixes case, when user tries to offload checksums
of VXLAN tunneled traffic.
Steps for reproduction (requires link partner with tunnels):
ip l s enp130s0f0 up
ip a f enp130s0f0
ip a a 10.10.110.2/24 dev enp130s0f0
ip l s enp130s0f0 mtu 1600
ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev \
enp130s0f0 dstport 4789
ip l s vxlan12_sut up
ip a a 20.10.110.2/24 dev vxlan12_sut
iperf3 -c 20.10.110.1 #should connect
Without this patch, TX descriptor was using wrong data, due to
l4 header pointing wrong address. NIC would then drop those packets
internally, due to incorrect TX descriptor data, which increased
GLV_TEPC register.
Fixes:
b4fb2d33514a ("i40e: Add support for MPLS + TSO")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>