mm/memory_hotplug: use pfn math in place of direct struct page manipulation

commit 1640a0ef80f6d572725f5b0330038c18e98ea168 upstream.

When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP.  Use pfn calculation to
handle it properly.

Without the fix, a wrong number of page might be skipped. Since skip cannot be
negative, scan_movable_page() will end early and might miss a movable page with
-ENOENT. This might fail offline_pages(). No bug is reported. The fix comes
from code inspection.

Link: https://lkml.kernel.org/r/20230913201248.452081-4-zi.yan@sent.com
Fixes: eeb0efd071d8 ("mm,memory_hotplug: fix scan_movable_pages() for gigantic hugepages")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb: use nth_page() in place of direct struct page manipulation

commit 426056efe835cf4864ccf4c328fe3af9146fc539 upstream.

When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP.  Use nth_page() to handle
it properly.

A wrong or non-existing page might be tried to be grabbed, either
leading to a non freeable page or kernel memory access errors.  No bug
is reported.  It comes from code inspection.

Link: https://lkml.kernel.org/r/20230913201248.452081-3-zi.yan@sent.com
Fixes: 57a196a58421 ("hugetlb: simplify hugetlb handling in follow_page_mask")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/cma: use nth_page() in place of direct struct page manipulation

commit 2e7cfe5cd5b6b0b98abf57a3074885979e187c1c upstream.

Patch series "Use nth_page() in place of direct struct page manipulation",
v3.

On SPARSEMEM without VMEMMAP, struct page is not guaranteed to be
contiguous, since each memory section's memmap might be allocated
independently.  hugetlb pages can go beyond a memory section size, thus
direct struct page manipulation on hugetlb pages/subpages might give wrong
struct page.  Kernel provides nth_page() to do the manipulation properly.
Use that whenever code can see hugetlb pages.

This patch (of 5):

When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP.  Use nth_page() to handle
it properly.

Without the fix, page_kasan_tag_reset() could reset wrong page tags,
causing a wrong kasan result.  No related bug is reported.  The fix
comes from code inspection.

Link: https://lkml.kernel.org/r/20230913201248.452081-1-zi.yan@sent.com
Link: https://lkml.kernel.org/r/20230913201248.452081-2-zi.yan@sent.com
Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/cmma: fix detection of DAT pages

commit 44d93045247661acbd50b1629e62f415f2747577 upstream.

If the cmma no-dat feature is available the kernel page tables are walked
to identify and mark all pages which are used for address translation (all
region, segment, and page tables). In a subsequent loop all other pages are
marked as "no-dat" pages with the ESSA instruction.

This information is visible to the hypervisor, so that the hypervisor can
optimize purging of guest TLB entries. The initial loop however is
incorrect: only the first three of the four pages which belong to segment
and region tables will be marked as being used for DAT. The last page is
incorrectly marked as no-dat.

This can result in incorrect guest TLB flushes.

Fix this by simply marking all four pages.

Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/mm: add missing arch_set_page_dat() call to gmap allocations

commit 1954da4a2b621a3328a63382cae7e5f5e2af502c upstream.

If the cmma no-dat feature is available all pages that are not used for
dynamic address translation are marked as "no-dat" with the ESSA
instruction. This information is visible to the hypervisor, so that the
hypervisor can optimize purging of guest TLB entries. This also means that
pages which are used for dynamic address translation must not be marked as
"no-dat", since the hypervisor may then incorrectly not purge guest TLB
entries.

Region, segment, and page tables allocated within the gmap code are
incorrectly marked as "no-dat", since an explicit call to
arch_set_page_dat() is missing, which would remove the "no-dat" mark.

In order to fix this add a new gmap_alloc_crst() function which should
be used to allocate region and segment tables, and which also calls
arch_set_page_dat().

Also add the arch_set_page_dat() call to page_table_alloc_pgste().

Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/mm: add missing arch_set_page_dat() call to vmem_crst_alloc()

commit 09cda0a400519b1541591c506e54c9c48e3101bf upstream.

If the cmma no-dat feature is available all pages that are not used for
dynamic address translation are marked as "no-dat" with the ESSA
instruction. This information is visible to the hypervisor, so that the
hypervisor can optimize purging of guest TLB entries. This also means that
pages which are used for dynamic address translation must not be marked as
"no-dat", since the hypervisor may then incorrectly not purge guest TLB
entries.

Region and segment tables allocated via vmem_crst_alloc() are incorrectly
marked as "no-dat", as soon as slab_is_available() returns true.

Such tables are allocated e.g. when kernel page tables are split, memory is
hotplugged, or a DCSS segment is loaded.

Fix this by adding the missing arch_set_page_dat() call.

Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: stm32-mdma: correct desc prep when channel running

commit 03f25d53b145bc2f7ccc82fc04e4482ed734f524 upstream.

In case of the prep descriptor while the channel is already running, the
CCR register value stored into the channel could already have its EN bit
set.  This would lead to a bad transfer since, at start transfer time,
enabling the channel while other registers aren't yet properly set.
To avoid this, ensure to mask the CCR_EN bit when storing the ccr value
into the mdma channel structure.

Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Tested-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20231009082450.452877-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mcb: fix error handling for different scenarios when parsing

commit 63ba2d07b4be72b94216d20561f43e1150b25d98 upstream.

chameleon_parse_gdd() may fail for different reasons and end up
in the err tag. Make sure we at least always free the mcb_device
allocated with mcb_alloc_dev().

If mcb_device_register() fails, make sure to give up the reference
in the same place the device was added.

Fixes: 728ac3389296 ("mcb: mcb-parse: fix error handing in chameleon_parse_gdd()")
Cc: stable <stable@kernel.org>
Reviewed-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Link: https://lore.kernel.org/r/20231019141434.57971-2-jorge.sanjuangarcia@duagon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Release all resources during unbind before updating device links

commit 2e84dc37920012b458e9458b19fc4ed33f81bc74 upstream.

This commit fixes a bug in commit 9ed9895370ae ("driver core: Functional
dependencies tracking support") where the device link status was
incorrectly updated in the driver unbind path before all the device's
resources were released.

Fixes: 9ed9895370ae ("driver core: Functional dependencies tracking support")
Cc: stable <stable@kernel.org>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Closes: https://lore.kernel.org/all/20231014161721.f4iqyroddkcyoefo@pengutronix.de/
Signed-off-by: Saravana Kannan <saravanak@google.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: James Clark <james.clark@arm.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231018013851.3303928-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Have the user copy of synthetic event address use correct context

commit 4f7969bcd6d33042d62e249b41b5578161e4c868 upstream.

A synthetic event is created by the synthetic event interface that can
read both user or kernel address memory. In reality, it reads any
arbitrary memory location from within the kernel. If the address space is
in USER (where CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE is set) then
it uses strncpy_from_user_nofault() to copy strings otherwise it uses
strncpy_from_kernel_nofault().

But since both functions use the same variable there's no annotation to
what that variable is (ie. __user). This makes sparse complain.

Quiet sparse by typecasting the strncpy_from_user_nofault() variable to
a __user pointer.

Link: https://lore.kernel.org/linux-trace-kernel/20231031151033.73c42e23@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 0934ae9977c2 ("tracing: Fix reading strings from synthetic events");
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311010013.fm8WTxa5-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/clone3: Fix broken test under !CONFIG_TIME_NS

commit fc7f04dc23db50206bee7891516ed4726c3f64cf upstream.

When execute the following command to test clone3 under !CONFIG_TIME_NS:

  # make headers && cd tools/testing/selftests/clone3 && make && ./clone3

we can see the following error info:

  # [7538] Trying clone3() with flags 0x80 (size 0)
  # Invalid argument - Failed to create new process
  # [7538] clone3() with flags says: -22 expected 0
  not ok 18 [7538] Result (-22) is different than expected (0)
  ...
  # Totals: pass:18 fail:1 xfail:0 xpass:0 skip:0 error:0

This is because if CONFIG_TIME_NS is not set, but the flag
CLONE_NEWTIME (0x80) is used to clone a time namespace, it
will return -EINVAL in copy_time_ns().

If kernel does not support CONFIG_TIME_NS, /proc/self/ns/time
will be not exist, and then we should skip clone3() test with
CLONE_NEWTIME.

With this patch under !CONFIG_TIME_NS:

  # make headers && cd tools/testing/selftests/clone3 && make && ./clone3
  ...
  # Time namespaces are not supported
  ok 18 # SKIP Skipping clone3() with CLONE_NEWTIME
  ...
  # Totals: pass:18 fail:0 xfail:0 xpass:0 skip:1 error:0

Link: https://lkml.kernel.org/r/1689066814-13295-1-git-send-email-yangtiezhu@loongson.cn
Fixes: 515bddf0ec41 ("selftests/clone3: test clone3 with CLONE_NEWTIME")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: core: Run atomic i2c xfer when !preemptible

commit aa49c90894d06e18a1ee7c095edbd2f37c232d02 upstream.

Since bae1d3a05a8b, i2c transfers are non-atomic if preemption is
disabled. However, non-atomic i2c transfers require preemption (e.g. in
wait_for_completion() while waiting for the DMA).

panic() calls preempt_disable_notrace() before calling
emergency_restart(). Therefore, if an i2c device is used for the
restart, the xfer should be atomic. This avoids warnings like:

[   12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0
[   12.676926] Voluntary context switch within RCU read-side critical section!
...
[   12.742376]  schedule_timeout from wait_for_completion_timeout+0x90/0x114
[   12.749179]  wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70
...
[   12.994527]  atomic_notifier_call_chain from machine_restart+0x34/0x58
[   13.001050]  machine_restart from panic+0x2a8/0x32c

Use !preemptible() instead, which is basically the same check as
pre-v5.2.

Fixes: bae1d3a05a8b ("i2c: core: remove use of in_atomic()")
Cc: stable@vger.kernel.org # v5.2+
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230327-tegra-pmic-reboot-v7-2-18699d5dcd76@skidata.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips: use nth_page() in place of direct struct page manipulation

commit aa5fe31b6b59210cb4ea28a59e68781f48eeca74 upstream.

__flush_dcache_pages() is called during hugetlb migration via
migrate_pages() -> migrate_hugetlbs() -> unmap_and_move_huge_page() ->
move_to_new_folio() -> flush_dcache_folio().  And with hugetlb and without
sparsemem vmemmap, struct page is not guaranteed to be contiguous beyond a
section.  Use nth_page() instead.

Without the fix, a wrong address might be used for data cache page flush.
No bug is reported. The fix comes from code inspection.

Link: https://lkml.kernel.org/r/20230913201248.452081-6-zi.yan@sent.com
Fixes: 15fa3e8e3269 ("mips: implement the new page table range API")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: use nth_page() in place of direct struct page manipulation

commit 8db0ec791f7788cd21e7f91ee5ff42c1c458d0e7 upstream.

When dealing with hugetlb pages, struct page is not guaranteed to be
contiguous on SPARSEMEM without VMEMMAP.  Use nth_page() to handle it
properly.

Without the fix, a wrong subpage might be checked for HWPoison, causing wrong
number of bytes of a page copied to user space. No bug is reported. The fix
comes from code inspection.

Link: https://lkml.kernel.org/r/20230913201248.452081-5-zi.yan@sent.com
Fixes: 38c1ddbde6c6 ("hugetlbfs: improve read HWPOISON hugepage")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/gdb/vmalloc: disable on no-MMU

commit 6620999f0d41e4fd6f047727936a964c3399d249 upstream.

vmap_area does not exist on no-MMU, therefore the GDB scripts fail to
load:

Traceback (most recent call last):
  File "<...>/vmlinux-gdb.py", line 51, in <module>
    import linux.vmalloc
  File "<...>/scripts/gdb/linux/vmalloc.py", line 14, in <module>
    vmap_area_ptr_type = vmap_area_type.get_type().pointer()
                         ^^^^^^^^^^^^^^^^^^^^^^^^^
  File "<...>/scripts/gdb/linux/utils.py", line 28, in get_type
    self._type = gdb.lookup_type(self._name)
                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
gdb.error: No struct type named vmap_area.

To fix this, disable the command and add an informative error message if
CONFIG_MMU is not defined, following the example of lx-slabinfo.

Link: https://lkml.kernel.org/r/20231031202235.2655333-2-ben.wolsieffer@hefring.com
Fixes: 852622bf3616 ("scripts/gdb/vmalloc: add vmallocinfo support")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/reboot: emergency_restart: Set correct system_state

commit 60466c067927abbcaff299845abd4b7069963139 upstream.

As the emergency restart does not call kernel_restart_prepare(), the
system_state stays in SYSTEM_RUNNING.

Since bae1d3a05a8b, this hinders i2c_in_atomic_xfer_mode() from becoming
active, and therefore might lead to avoidable warnings in the restart
handlers, e.g.:

[   12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0
[   12.676926] Voluntary context switch within RCU read-side critical section!
...
[   12.742376]  schedule_timeout from wait_for_completion_timeout+0x90/0x114
[   12.749179]  wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70
...
[   12.994527]  atomic_notifier_call_chain from machine_restart+0x34/0x58
[   13.001050]  machine_restart from panic+0x2a8/0x32c

Avoid these by setting the correct system_state.

Fixes: bae1d3a05a8b ("i2c: core: remove use of in_atomic()")
Cc: stable@vger.kernel.org # v5.2+
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230327-tegra-pmic-reboot-v7-1-18699d5dcd76@skidata.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

quota: explicitly forbid quota files from being encrypted

commit d3cc1b0be258191d6360c82ea158c2972f8d3991 upstream.

Since commit d7e7b9af104c ("fscrypt: stop using keyrings subsystem for
fscrypt_master_key"), xfstest generic/270 causes a WARNING when run on
f2fs with test_dummy_encryption in the mount options:

$ kvm-xfstests -c f2fs/encrypt generic/270
[...]
WARNING: CPU: 1 PID: 2453 at fs/crypto/keyring.c:240 fscrypt_destroy_keyring+0x1f5/0x260

The cause of the WARNING is that not all encrypted inodes have been
evicted before fscrypt_destroy_keyring() is called, which violates an
assumption.  This happens because the test uses an external quota file,
which gets automatically encrypted due to test_dummy_encryption.

Encryption of quota files has never really been supported.  On ext4,
ext4_quota_read() does not decrypt the data, so encrypted quota files
are always considered invalid on ext4.  On f2fs, f2fs_quota_read() uses
the pagecache, so trying to use an encrypted quota file gets farther,
resulting in the issue described above being possible.  But this was
never intended to be possible, and there is no use case for it.

Therefore, make the quota support layer explicitly reject using
IS_ENCRYPTED inodes when quotaon is attempted.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230905003227.326998-1-ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: fix potential data lost in recovering journal raced with synchronizing fs bdev

commit 61187fce8600e8ef90e601be84f9d0f3222c1206 upstream.

JBD2 makes sure journal data is fallen on fs device by sync_blockdev(),
however, other process could intercept the EIO information from bdev's
mapping, which leads journal recovering successful even EIO occurs during
data written back to fs device.

We found this problem in our product, iscsi + multipath is chosen for block
device of ext4. Unstable network may trigger kpartx to rescan partitions in
device mapper layer. Detailed process is shown as following:

  mount          kpartx          irq
jbd2_journal_recover
 do_one_pass
  memcpy(nbh->b_data, obh->b_data) // copy data to fs dev from journal
  mark_buffer_dirty // mark bh dirty
         vfs_read
  generic_file_read_iter // dio
   filemap_write_and_wait_range
    __filemap_fdatawrite_range
     do_writepages
      block_write_full_folio
       submit_bh_wbc
            >>  EIO occurs in disk  <<
                     end_buffer_async_write
      mark_buffer_write_io_error
       mapping_set_error
        set_bit(AS_EIO, &mapping->flags) // set!
    filemap_check_errors
     test_and_clear_bit(AS_EIO, &mapping->flags) // clear!
 err2 = sync_blockdev
  filemap_write_and_wait
   filemap_check_errors
    test_and_clear_bit(AS_EIO, &mapping->flags) // false
 err2 = 0

Filesystem is mounted successfully even data from journal is failed written
into disk, and ext4/ocfs2 could become corrupted.

Fix it by comparing the wb_err state in fs block device before recovering
and after recovering.

A reproducer can be found in the kernel bugzilla referenced below.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217888
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230919012525.1783108-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codecs: wsa-macro: fix uninitialized stack variables with name prefix

commit 72151ad0cba8a07df90130ff62c979520d71f23b upstream.

Driver compares widget name in wsa_macro_spk_boost_event() widget event
callback, however it does not handle component's name prefix.  This
leads to using uninitialized stack variables as registers and register
values.  Handle gracefully such case.

Fixes: 2c4066e5d428 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231003155422.801160-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hid: lenovo: Resend all settings on reset_resume for compact keyboards

commit 2f2bd7cbd1d1548137b351040dc4e037d18cdfdc upstream.

The USB Compact Keyboard variant requires a reset_resume function to
restore keyboard configuration after a suspend in some situations. Move
configuration normally done on probe to lenovo_features_set_cptkbd(), then
recycle this for use on reset_resume.

Without, the keyboard and driver would end up in an inconsistent state,
breaking middle-button scrolling amongst other problems, and twiddling
sysfs values wouldn't help as the middle-button mode won't be set until
the driver is reloaded.

Tested on a USB and Bluetooth Thinkpad Compact Keyboard.

CC: stable@vger.kernel.org
Fixes: 94eefa271323 ("HID: lenovo: Use native middle-button mode for compact keyboards")
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Link: https://lore.kernel.org/r/20231002150914.22101-1-martink@posteo.de
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/resctrl: Reduce failures due to outliers in MBA/MBM tests

commit ef43c30858754d99373a63dff33280a9969b49bc upstream.

The initial value of 5% chosen for the maximum allowed percentage
difference between resctrl mbm value and IMC mbm value in

commit 06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting
       format") was "randomly chosen value" (as admitted by the changelog).

When running tests in our lab across a large number platforms, 5%
difference upper bound for success seems a bit on the low side for the
MBA and MBM tests. Some platforms produce outliers that are slightly
above that, typically 6-7%, which leads MBA/MBM test frequently
failing.

Replace the "randomly chosen value" with a success bound that is based
on those measurements across large number of platforms by relaxing the
MBA/MBM success bound to 8%. The relaxed bound removes the failures due
the frequent outliers.

Fixed commit description style error during merge:
Shuah Khan <skhan@linuxfoundation.org>

Fixes: 06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting format")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/resctrl: Fix feature checks

commit 06035f019422ba17e85c11e70d6d8bdbe9fa1afd upstream.

The MBA and CMT tests expect support of other features to be able to
run.

When platform only supports MBA but not MBM, MBA test will fail with:
Failed to open total bw file: No such file or directory

When platform only supports CMT but not CAT, CMT test will fail with:
Failed to open bit mask file '/sys/fs/resctrl/info/L3/cbm_mask': No such file or directory

It leads to the test reporting test fail (even if no test was run at
all).

Extend feature checks to cover these two conditions to show these tests
were skipped rather than failed.

Fixes: ee0415681eb6 ("selftests/resctrl: Use resctrl/info for feature detection")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org> # selftests/resctrl: Refactor feature check to use resource and feature name
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/resctrl: Refactor feature check to use resource and feature name

commit d56e5da0e0f557a206bace16bbbdad00a5800e34 upstream.

Feature check in validate_resctrl_feature_request() takes in the test
name string and maps that to what to check per test.

Pass resource and feature names to validate_resctrl_feature_request()
directly rather than deriving them from the test name inside the
function which makes the feature check easier to extend for new test
cases.

Use !! in the return statement to make the boolean conversion more
obvious even if it is not strictly necessary from correctness point of
view (to avoid it looking like the function is returning a freed
pointer).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org> # selftests/resctrl: Remove duplicate feature check from CMT test
Cc: <stable@vger.kernel.org> # selftests/resctrl: Move _GNU_SOURCE define into Makefile
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/resctrl: Move _GNU_SOURCE define into Makefile

commit 3a1e4a91aa454a1c589a9824d54179fdbfccde45 upstream.

_GNU_SOURCE is defined in resctrl.h. Defining _GNU_SOURCE has a large
impact on what gets defined when including headers either before or
after it. This can result in compile failures if .c file decides to
include a standard header file before resctrl.h.

It is safer to define _GNU_SOURCE in Makefile so it is always defined
regardless of in which order includes are done.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/resctrl: Remove duplicate feature check from CMT test

commit 030b48fb2cf045dead8ee2c5ead560930044c029 upstream.

The test runner run_cmt_test() in resctrl_tests.c checks for CMT
feature and does not run cmt_resctrl_val() if CMT is not supported.
Then cmt_resctrl_val() also check is CMT is supported.

Remove the duplicated feature check for CMT from cmt_resctrl_val().

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/resctrl: Fix uninitialized .sa_flags

commit beb7f471847663559bd0fe60af1d70e05a1d7c6c upstream.

signal_handler_unregister() calls sigaction() with uninitializing
sa_flags in the struct sigaction.

Make sure sa_flags is always initialized in signal_handler_unregister()
by initializing the struct sigaction when declaring it. Also add the
initialization to signal_handler_register() even if there are no know
bugs in there because correctness is then obvious from the code itself.

Fixes: 73c55fa5ab55 ("selftests/resctrl: Commonize the signal handler register/unregister for all tests")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag

commit 805ce81826c896dd3c351a32814b28557f9edf54 upstream.

In the current setup the PA is left unmuted even when the
Soundwire ports are not started streaming. This can lead to click
and pop sounds during start.
There is a same issue in the reverse order where in the PA is
left unmute even after the data stream is stopped, the time
between data stream stopping and port closing is long enough
to accumulate DC on the line resulting in Click/Pop noise
during end of stream.

making use of new mute_unmute_on_trigger flag is helping a
lot with this Click/Pop issues reported on this Codec

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231027105747.32450-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: soc-dai: add flag to mute and unmute stream during trigger

commit f0220575e65abe09c09cd17826a3cdea76e8d58f upstream.

In some setups like Speaker amps which are very sensitive, ex: keeping them
unmute without actual data stream for very short duration results in a
static charge and results in pop and clicks. To minimize this, provide a way
to mute and unmute such codecs during trigger callbacks.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231027105747.32450-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ johan: backport to v6.6.2 ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: split async and sync catchall in two functions

[ Upstream commit 8837ba3e58ea1e3d09ae36db80b1e80853aada95 ]

list_for_each_entry_safe() does not work for the async case which runs
under RCU, therefore, split GC logic for catchall in two functions
instead, one for each of the sync and async GC variants.

The catchall sync GC variant never sees a _DEAD bit set on ever, thus,
this handling is removed in such case, moreover, allocate GC sync batch
via GFP_KERNEL.

Fixes: 93995bf4af2c ("netfilter: nf_tables: remove catchall element in GC sync path")
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: remove catchall element in GC sync path

[ Upstream commit 93995bf4af2c5a99e2a87f0cd5ce547d31eb7630 ]

The expired catchall element is not deactivated and removed from GC sync
path. This path holds mutex so just call nft_setelem_data_deactivate()
and nft_setelem_catchall_remove() before queueing the GC work.

Fixes: 4a9e12ea7e70 ("netfilter: nft_set_pipapo: call nft_trans_gc_queue_sync() in catchall GC")
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: detect changes to the backing overlay file

commit b836c4d29f2744200b2af41e14bf50758dddc818 upstream.

Commit 18b44bc5a672 ("ovl: Always reevaluate the file signature for
IMA") forced signature re-evaulation on every file access.

Instead of always re-evaluating the file's integrity, detect a change
to the backing file, by comparing the cached file metadata with the
backing file's metadata.  Verifying just the i_version has not changed
is insufficient.  In addition save and compare the i_ino and s_dev
as well.

Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Eric Snowberg <eric.snowberg@oracle.com>
Tested-by: Raul E Rangel <rrangel@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: annotate iint mutex to avoid lockdep false positive warnings

commit e044374a8a0a99e46f4e6d6751d3042b6d9cc12e upstream.

It is not clear that IMA should be nested at all, but as long is it
measures files both on overlayfs and on underlying fs, we need to
annotate the iint mutex to avoid lockdep false positives related to
IMA + overlayfs, same as overlayfs annotates the inode mutex.

Reported-and-tested-by: syzbot+b42fe626038981fb7bfa@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: qcom-spmi-pmic: Fix revid implementation

commit 7b439aaa62fee474a0d84d67a25f4984467e7b95 upstream.

The Qualcomm SPMI PMIC revid implementation is broken in multiple ways.

First, it assumes that just because the sibling base device has been
registered that means that it is also bound to a driver, which may not
be the case (e.g. due to probe deferral or asynchronous probe). This
could trigger a NULL-pointer dereference when attempting to access the
driver data of the unbound device.

Second, it accesses driver data of a sibling device directly and without
any locking, which means that the driver data may be freed while it is
being accessed (e.g. on driver unbind).

Third, it leaks a struct device reference to the sibling device which is
looked up using the spmi_device_from_of() every time a function (child)
device is calling the revid function (e.g. on probe).

Fix this mess by reimplementing the revid lookup so that it is done only
at probe of the PMIC device; the base device fetches the revid info from
the hardware, while any secondary SPMI device fetches the information
from the base device and caches it so that it can be accessed safely
from its children. If the base device has not been probed yet then probe
of a secondary device is deferred.

Fixes: e9c11c6e3a0e ("mfd: qcom-spmi-pmic: expose the PMIC revid information to clients")
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20231003152927.15000-3-johan+linaro@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: qcom-spmi-pmic: Fix reference leaks in revid helper

commit a0fa44c261e448c531f9adb3a5189a3520f3e316 upstream.

The Qualcomm SPMI PMIC revid implementation is broken in multiple ways.

First, it totally ignores struct device_node reference counting and
leaks references to the parent bus node as well as each child it
iterates over using an open-coded for_each_child_of_node().

Second, it leaks references to each spmi device on the bus that it
iterates over by failing to drop the reference taken by the
spmi_device_from_of() helper.

Fix the struct device_node leaks by reimplementing the lookup using
for_each_child_of_node() and adding the missing reference count
decrements. Fix the sibling struct device leaks by dropping the
unnecessary lookups of devices with the wrong USID.

Note that this still leaves one struct device reference leak in case a
base device is found but it is not the parent of the device used for the
lookup. This will be addressed in a follow-on patch.

Fixes: e9c11c6e3a0e ("mfd: qcom-spmi-pmic: expose the PMIC revid information to clients")
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20231003152927.15000-2-johan+linaro@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

leds: trigger: netdev: Move size check in set_device_name

commit 259e33cbb1712a7dd844fc9757661cc47cb0e39b upstream.

GCC 13.2 complains about array subscript 17 is above array bounds of
'char[16]' with IFNAMSIZ set to 16.

The warning is correct but this scenario is impossible.
set_device_name is called by device_name_store (store sysfs entry) and
netdev_trig_activate.

device_name_store already check if size is >= of IFNAMSIZ and return
-EINVAL. (making the warning scenario impossible)

netdev_trig_activate works on already defined interface, where the name
has already been checked and should already follow the condition of
strlen() < IFNAMSIZ.

Aside from the scenario being impossible, set_device_name can be
improved to both mute the warning and make the function safer.
To make it safer, move size check from device_name_store directly to
set_device_name and prevent any out of bounds scenario.

Cc: stable@vger.kernel.org
Fixes: 28a6a2ef18ad ("leds: trigger: netdev: refactor code setting device name")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309192035.GTJEEbem-lkp@intel.com/
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20231007131042.15032-1-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: ipq6018: Fix tcsr_mutex register size

commit 72fc3d58b87b0d622039c6299b89024fbb7b420f upstream.

IPQ6018's TCSR Mutex HW lock register has 32 locks of size 4KB each.
Total size of the TCSR Mutex registers is 128KB.

Fix size of the tcsr_mutex hwlock register to 0x20000.

Changes in v2:
 - Drop change to remove qcom,ipq6018-tcsr-mutex compatible string
 - Added Fixes and stable tags

Cc: stable@vger.kernel.org
Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905095535.1263113-2-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: ipq9574: Fix hwlock index for SMEM

commit 5fe8508e2bc8eb4208b0434b6c1ca306c1519ade upstream.

SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.

Fix the SMEM hwlock index to 3 for IPQ9574.

Cc: stable@vger.kernel.org
Fixes: 46384ac7a618 ("arm64: dts: qcom: ipq9574: Add SMEM support")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-5-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: FPDT: properly handle invalid FPDT subtables

commit a83c68a3bf7c418c9a46693c63c638852b0c1f4e upstream.

Buggy BIOSes may have invalid FPDT subtables, e.g. on my hardware:

S3PT subtable:

7F20FE30: 53 33 50 54 24 00 00 00-00 00 00 00 00 00 18 01  *S3PT$...........*
7F20FE40: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00  *................*
7F20FE50: 00 00 00 00

Here the first record has zero length.

FBPT subtable:

7F20FE50:             46 42 50 54-3C 00 00 00 46 42 50 54  *....FBPT<...FBPT*
7F20FE60: 02 00 30 02 00 00 00 00-00 00 00 00 00 00 00 00  *..0.............*
7F20FE70: 2A A6 BC 6E 0B 00 00 00-1A 44 41 70 0B 00 00 00  **..n.....DAp....*
7F20FE80: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00  *................*

And here FBPT table has FBPT signature repeated instead of the first
record.

Current code will be looping indefinitely due to zero length records, so
break out of the loop if record length is zero.

While we are here, add proper handling for fpdt_process_subtable()
failures.

Fixes: d1eb86e59be0 ("ACPI: tables: introduce support for FPDT table")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
[ rjw: Comment edit, added empty code lines ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: qcom_scm: use 64-bit calling convention only when client is 64-bit

commit 3337a6fea25370d3d244ec6bb38c71ee86fcf837 upstream.

Per the "SMC calling convention specification", the 64-bit calling
convention can only be used when the client is 64-bit. Whereas the
32-bit calling convention can be used by either a 32-bit or a 64-bit
client.

Currently during SCM probe, irrespective of the client, 64-bit calling
convention is made, which is incorrect and may lead to the undefined
behaviour when the client is 32-bit. Let's fix it.

Cc: stable@vger.kernel.org
Fixes: 9a434cee773a ("firmware: qcom_scm: Dynamically support SMCCC and legacy conventions")
Reviewed-By: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230925-scm-v3-1-8790dff6a749@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: ipq8074: Fix hwlock index for SMEM

commit 8a781d04e580705d36f7db07f5c80e748100b69d upstream.

SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.

Fix the SMEM hwlock index to 3 for IPQ8074.

Cc: stable@vger.kernel.org
Fixes: 42124b947e8e ("arm64: dts: qcom: ipq8074: add SMEM support")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-4-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: ipq5332: Fix hwlock index for SMEM

commit d08afd80158399a081b478a19902364e3dd0f84c upstream.

SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.

Fix the SMEM hwlock index to 3 for IPQ5332.

Cc: stable@vger.kernel.org
Fixes: d56dd7f935e1 ("arm64: dts: qcom: ipq5332: add SMEM support")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-2-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: intel: powerclamp: fix mismatch in get function for max_idle

commit fae633cfb729da2771b5433f6b84ae7e8b4aa5f7 upstream.

KASAN reported this

      [ 444.853098] BUG: KASAN: global-out-of-bounds in param_get_int+0x77/0x90
      [ 444.853111] Read of size 4 at addr ffffffffc16c9220 by task cat/2105
      ...
      [ 444.853442] The buggy address belongs to the variable:
      [ 444.853443] max_idle+0x0/0xffffffffffffcde0 [intel_powerclamp]

There is a mismatch between the param_get_int and the definition of
max_idle.  Replacing param_get_int with param_get_byte resolves this
issue.

Fixes: ebf519710218 ("thermal: intel: powerclamp: Add two module parameters")
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+
Signed-off-by: David Arcari <darcari@redhat.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: don't arbitrarily slow down delalloc if we're committing

commit 11aeb97b45ad2e0040cbb2a589bc403152526345 upstream.

We have a random schedule_timeout() if the current transaction is
committing, which seems to be a holdover from the original delalloc
reservation code.

Remove this, we have the proper flushing stuff, we shouldn't be hoping
for random timing things to make everything work.  This just induces
latency for no reason.

CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rcu: kmemleak: Ignore kmemleak false positives when RCU-freeing objects

commit 5f98fd034ca6fd1ab8c91a3488968a0e9caaabf6 upstream.

Since the actual slab freeing is deferred when calling kvfree_rcu(), so
is the kmemleak_free() callback informing kmemleak of the object
deletion. From the perspective of the kvfree_rcu() caller, the object is
freed and it may remove any references to it. Since kmemleak does not
scan RCU internal data storing the pointer, it will report such objects
as leaks during the grace period.

Tell kmemleak to ignore such objects on the kvfree_call_rcu() path. Note
that the tiny RCU implementation does not have such issue since the
objects can be tracked from the rcu_ctrlblk structure.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://lore.kernel.org/all/F903A825-F05F-4B77-A2B5-7356282FBA2C@apple.com/
Cc: <stable@vger.kernel.org>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: hibernate: Clean up sync_read handling in snapshot_write_next()

commit d08970df1980476f27936e24d452550f3e9e92e1 upstream.

In snapshot_write_next(), sync_read is set and unset in three different
spots unnecessiarly. As a result there is a subtle bug where the first
page after the meta data has been loaded unconditionally sets sync_read
to 0. If this first PFN was actually a highmem page, then the returned
buffer will be the global "buffer," and the page needs to be loaded
synchronously.

That is, I'm not sure we can always assume the following to be safe:

handle->buffer = get_buffer(&orig_bm, &ca);
handle->sync_read = 0;

Because get_buffer() can call get_highmem_page_buffer() which can
return 'buffer'.

The easiest way to address this is just set sync_read before
snapshot_write_next() returns if handle->buffer == buffer.

Signed-off-by: Brian Geffon <bgeffon@google.com>
Fixes: 8357376d3df2 ("[PATCH] swsusp: Improve handling of highmem")
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: hibernate: Use __get_safe_page() rather than touching the list

commit f0c7183008b41e92fa676406d87f18773724b48b upstream.

We found at least one situation where the safe pages list was empty and
get_buffer() would gladly try to use a NULL pointer.

Signed-off-by: Brian Geffon <bgeffon@google.com>
Fixes: 8357376d3df2 ("[PATCH] swsusp: Improve handling of highmem")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: timer: renesas,rz-mtu3: Fix overflow/underflow interrupt names

commit b7a8f1f7a8a25e09aaefebb6251a77f44cda638b upstream.

As per R01UH0914EJ0130 Rev.1.30 HW manual the MTU3 overflow/underflow
interrupt names starts with 'tci' instead of 'tgi'.

Fix this documentation issue by replacing below overflow/underflow
interrupt names:
 - tgiv0->tciv0
 - tgiv1->tciv1
 - tgiu1->tciu1
 - tgiv2->tciv2
 - tgiu2->tciu2
 - tgiv3->tciv3
 - tgiv4->tciv4
 - tgiv6->tciv6
 - tgiv7->tciv7
 - tgiv8->tciv8
 - tgiu8->tciu8

Fixes: 0a9d6b54297e ("dt-bindings: timer: Document RZ/G2L MTU3a bindings")
Cc: stable@kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230727081848.100834-2-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: ipq6018: Fix hwlock index for SMEM

commit 95d97b111e1e184b0c8656137033ed64f2cf21e4 upstream.

SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.

Fix the SMEM hwlock index to 3 for IPQ6018.

Cc: stable@vger.kernel.org
Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-3-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rcu/tree: Defer setting of jiffies during stall reset

commit b96e7a5fa0ba9cda32888e04f8f4bac42d49a7f8 upstream.

There are instances where rcu_cpu_stall_reset() is called when jiffies
did not get a chance to update for a long time. Before jiffies is
updated, the CPU stall detector can go off triggering false-positives
where a just-started grace period appears to be ages old. In the past,
we disabled stall detection in rcu_cpu_stall_reset() however this got
changed [1]. This is resulting in false-positives in KGDB usecase [2].

Fix this by deferring the update of jiffies to the third run of the FQS
loop. This is more robust, as, even if rcu_cpu_stall_reset() is called
just before jiffies is read, we would end up pushing out the jiffies
read by 3 more FQS loops. Meanwhile the CPU stall detection will be
delayed and we will not get any false positives.

[1] https://lore.kernel.org/all/20210521155624.174524-2-senozhatsky@chromium.org/
[2] https://lore.kernel.org/all/20230814020045.51950-2-chenhuacai@loongson.cn/

Tested with rcutorture.cpu_stall option as well to verify stall behavior
with/without patch.

Tested-by: Huacai Chen <chenhuacai@loongson.cn>
Reported-by: Binbin Zhou <zhoubinbin@loongson.cn>
Closes: https://lore.kernel.org/all/20230814020045.51950-2-chenhuacai@loongson.cn/
Suggested-by: Paul McKenney <paulmck@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: a80be428fbc1 ("rcu: Do not disable GP stall detection in rcu_cpu_stall_reset()")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

svcrdma: Drop connection after an RDMA Read error

commit 197115ebf358cb440c73e868b2a0a5ef728decc6 upstream.

When an RPC Call message cannot be pulled from the client, that
is a message loss, by definition. Close the connection to trigger
the client to resend.

Cc: <stable@vger.kernel.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: wilc1000: use vmm_table as array in wilc struct

commit 05ac1a198a63ad66bf5ae8b7321407c102d40ef3 upstream.

Enabling KASAN and running some iperf tests raises some memory issues with
vmm_table:

BUG: KASAN: slab-out-of-bounds in wilc_wlan_handle_txq+0x6ac/0xdb4
Write of size 4 at addr c3a61540 by task wlan0-tx/95

KASAN detects that we are writing data beyond range allocated to vmm_table.
There is indeed a mismatch between the size passed to allocator in
wilc_wlan_init, and the range of possible indexes used later: allocation
size is missing a multiplication by sizeof(u32)

Fixes: 40b717bfcefa ("wifi: wilc1000: fix DMA on stack objects")
Cc: stable@vger.kernel.org
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231017-wilc1000_tx_oops-v3-1-b2155f1f7bee@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Lengthen reset delay for VideoPropulsion Torrent QN16e card

commit c9260693aa0c1e029ed23693cfd4d7814eee6624 upstream.

Commit ac91e6980563 ("PCI: Unify delay handling for reset and resume")
shortened an unconditional 1 sec delay after a Secondary Bus Reset to 100
msec for PCIe (per PCIe r6.1 sec 6.6.1).  The 1 sec delay is only required
for Conventional PCI.

But it turns out that there are PCIe devices which require a longer delay
than prescribed before first config space access after reset recovery or
resume from D3cold:

Chad reports that a "VideoPropulsion Torrent QN16e" MPEG QAM Modulator
"raises a PCI system error (PERR), as reported by the IPMI event log, and
the hardware itself would suffer a catastrophic event, cycling the server"
unless the longer delay is observed.

The card is specified to conform to PCIe r1.0 and indeed only supports Gen1
speed (2.5 GT/s) according to lspci.  PCIe r1.0 sec 7.6 prescribes the same
100 msec delay as PCIe r6.1 sec 6.6.1:

  To allow components to perform internal initialization, system software
  must wait for at least 100 ms from the end of a reset (cold/warm/hot)
  before it is permitted to issue Configuration Requests

The behavior of the Torrent QN16e card thus appears to be a quirk.  Treat
it as such and lengthen the reset delay for this specific device.

Fixes: ac91e6980563 ("PCI: Unify delay handling for reset and resume")
Link: https://lore.kernel.org/r/47727e792c7f0282dc144e3ec8ce8eb6e713394e.1695304512.git.lukas@wunner.de
Reported-by: Chad Schroeder <CSchroeder@sonifi.com>
Closes: https://lore.kernel.org/linux-pci/DM6PR16MB2844903E34CAB910082DF019B1FAA@DM6PR16MB2844.namprd16.prod.outlook.com/
Tested-by: Chad Schroeder <CSchroeder@sonifi.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: exynos: Don't discard .remove() callback

commit 83a939f0fdc208ff3639dd3d42ac9b3c35607fd2 upstream.

With CONFIG_PCI_EXYNOS=y and exynos_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.

The right thing to do is do always have the remove callback available.
This fixes the following warning by modpost:

  WARNING: modpost: drivers/pci/controller/dwc/pci-exynos: section mismatch in reference: exynos_pcie_driver+0x8 (section: .data) -> exynos_pcie_remove (section: .exit.text)

(with ARCH=x86_64 W=1 allmodconfig).

Fixes: 340cba6092c2 ("pci: Add PCIe driver for Samsung Exynos")
Link: https://lore.kernel.org/r/20231001170254.2506508-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: kirin: Don't discard .remove() callback

commit 3064ef2e88c1629c1e67a77d7bc20020b35846f2 upstream.

With CONFIG_PCIE_KIRIN=y and kirin_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.

The right thing to do is do always have the remove callback available.
This fixes the following warning by modpost:

  drivers/pci/controller/dwc/pcie-kirin: section mismatch in reference: kirin_pcie_driver+0x8 (section: .data) -> kirin_pcie_remove (section: .exit.text)

(with ARCH=x86_64 W=1 allmodconfig).

Fixes: 000f60db784b ("PCI: kirin: Add support for a PHY layer")
Link: https://lore.kernel.org/r/20231001170254.2506508-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()

commit 8e37372ad0bea4c9b4712d9943f6ae96cff9491f upstream.

aspm_attr_store_common(), which handles sysfs control of ASPM, has the same
problem as fb097dcd5a28 ("PCI/ASPM: Disable only ASPM_STATE_L1 when driver
disables L1"): disabling L1 adds only ASPM_L1 (but not any of the L1.x
substates) to the "aspm_disable" mask.

Enabling one substate, e.g., L1.1, via sysfs removes ASPM_L1 from the
disable mask.  Since disabling L1 via sysfs doesn't add any of the
substates to the disable mask, enabling L1.1 actually enables *all* the
substates.

In this scenario:

  - Write 0 to "l1_aspm" to disable L1
  - Write 1 to "l1_1_aspm" to enable L1.1

the intention is to disable L1 and all L1.x substates, then enable just
L1.1, but in fact, *all* L1.x substates are enabled.

Fix this by explicitly disabling all the L1.x substates when disabling L1.

Fixes: 72ea91afbfb0 ("PCI/ASPM: Add sysfs attributes for controlling ASPM link states")
Link: https://lore.kernel.org/r/6ba7dd79-9cfe-4ed0-a002-d99cb842f361@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers

commit a07d2497ed657eb2efeb967af47e22f573dcd1d6 upstream.

The DWC core driver exposes the write_dbi2() callback for writing to the
DBI2 registers in a vendor-specific way.

On the Qcom EP platforms, the DBI_CS2 bit in the ELBI region needs to be
asserted before writing to any DBI2 registers and deasserted once done.

So, let's implement the callback for the Qcom PCIe EP driver so that the
DBI2 writes are correctly handled in the hardware.

Without this callback, the DBI2 register writes like BAR size won't go
through and as a result, the default BAR size is set for all BARs.

[kwilczynski: commit log, renamed function to match the DWC convention]
Fixes: f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/linux-pci/20231025130029.74693-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Cc: stable@vger.kernel.org # 5.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A

commit ed9009ad300c0f15a3ecfe9613547b1962bde02c upstream.

Micron MTFC4GACAJCN eMMC supports cache but requires that flush cache
operation be allowed only after a write has occurred. Otherwise, the
cache flush command or subsequent commands will time out.

Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231030224809.59245-1-beanhuo@iokpp.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci_am654: fix start loop index for TAP value parsing

commit 71956d0cb56c1e5f9feeb4819db87a076418e930 upstream.

ti,otap-del-sel-legacy/ti,itap-del-sel-legacy passed from DT
are currently ignored for all SD/MMC and eMMC modes. Fix this
by making start loop index to MMC_TIMING_LEGACY.

Fixes: 8ee5fc0e0b3b ("mmc: sdhci_am654: Update OTAPDLY writes")
Signed-off-by: Nitin Yadav <n-yadav@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231026061458.1116276-1-n-yadav@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: vub300: fix an error code

commit b44f9da81783fda72632ef9b0d05ea3f3ca447a5 upstream.

This error path should return -EINVAL instead of success.

Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/0769d30c-ad80-421b-bf5d-7d6f5d85604e@moroto.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix slab out of bounds write in smb_inherit_dacl()

commit eebff19acaa35820cb09ce2ccb3d21bee2156ffb upstream.

slab out-of-bounds write is caused by that offsets is bigger than pntsd
allocation size. This patch add the check to validate 3 offsets using
allocation size.

Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-22271
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: handle malformed smb1 message

commit 5a5409d90bd05f87fe5623a749ccfbf3f7c7d400 upstream.

If set_smb1_rsp_status() is not implemented, It will cause NULL pointer
dereferece error when client send malformed smb1 message.
This patch add set_smb1_rsp_status() to ignore malformed smb1 message.

Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix recursive locking in vfs helpers

commit 807252f028c59b9a3bac4d62ad84761548c10f11 upstream.

Running smb2.rename test from Samba smbtorture suite against a kernel built
with lockdep triggers a "possible recursive locking detected" warning.

This is because mnt_want_write() is called twice with no mnt_drop_write()
in between:
  -> ksmbd_vfs_mkdir()
    -> ksmbd_vfs_kern_path_create()
       -> kern_path_create()
          -> filename_create()
            -> mnt_want_write()
       -> mnt_want_write()

Fix this by removing the mnt_want_write/mnt_drop_write calls from vfs
helpers that call kern_path_create().

Full lockdep trace below:

============================================
WARNING: possible recursive locking detected
6.6.0-rc5 #775 Not tainted
--------------------------------------------
kworker/1:1/32 is trying to acquire lock:
ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: ksmbd_vfs_mkdir+0xe1/0x410

but task is already holding lock:
ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(sb_writers#5);
  lock(sb_writers#5);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

4 locks held by kworker/1:1/32:
 #0: ffff8880064e4138 ((wq_completion)ksmbd-io){+.+.}-{0:0}, at: process_one_work+0x40e/0x980
 #1: ffff888005b0fdd0 ((work_completion)(&work->work)){+.+.}-{0:0}, at: process_one_work+0x40e/0x980
 #2: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260
 #3: ffff8880057ce760 (&type->i_mutex_dir_key#3/1){+.+.}-{3:3}, at: filename_create+0x123/0x260

Cc: stable@vger.kernel.org
Fixes: 40b268d384a2 ("ksmbd: add mnt_want_write to ksmbd vfs functions")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: ipq6018: drop the CLK_SET_RATE_PARENT flag from PLL clocks

commit 99cd4935cb972d0aafb16838bb2aeadbcaf196ce upstream.

GPLL, NSS crypto PLL clock rates are fixed and shouldn't be scaled based
on the request from dependent clocks. Doing so will result in the
unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the PLL
clocks.

Cc: stable@vger.kernel.org
Fixes: d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-2-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocks

commit e641a070137dd959932c7c222e000d9d941167a2 upstream.

GPLL, NSS crypto PLL clock rates are fixed and shouldn't be scaled based
on the request from dependent clocks. Doing so will result in the
unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the PLL
clocks.

Cc: stable@vger.kernel.org
Fixes: b8e7e519625f ("clk: qcom: ipq8074: add remaining PLL’s")
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-1-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

integrity: powerpc: Do not select CA_MACHINE_KEYRING

commit 3edc22655647378dea01900f7b04e017ff96bda9 upstream.

No other platform needs CA_MACHINE_KEYRING, either.

This is policy that should be decided by the administrator, not Kconfig
dependencies.

Cc: stable@vger.kernel.org # v6.6+
Fixes: d7d91c4743c4 ("integrity: PowerVM machine keyring enablement")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: visconti: Fix undefined behavior bug in struct visconti_pll_provider

commit 5ad1e217a2b23aa046b241183bd9452d259d70d0 upstream.

`struct clk_hw_onecell_data` is a flexible structure, which means that
it contains flexible-array member at the bottom, in this case array
`hws`:

include/linux/clk-provider.h:
1380 struct clk_hw_onecell_data {
1381         unsigned int num;
1382         struct clk_hw *hws[] __counted_by(num);
1383 };

This could potentially lead to an overwrite of the objects following
`clk_data` in `struct visconti_pll_provider`, in this case
`struct device_node *node;`, at run-time:

drivers/clk/visconti/pll.h:
 16 struct visconti_pll_provider {
 17         void __iomem *reg_base;
 18         struct clk_hw_onecell_data clk_data;
 19         struct device_node *node;
 20 };

Notice that a total of 56 bytes are allocated for flexible-array `hws`
at line 328. See below:

include/dt-bindings/clock/toshiba,tmpv770x.h:
 14 #define TMPV770X_NR_PLL 7

drivers/clk/visconti/pll-tmpv770x.c:
 69 ctx = visconti_init_pll(np, reg_base, TMPV770X_NR_PLL);

drivers/clk/visconti/pll.c:
321 struct visconti_pll_provider * __init visconti_init_pll(struct device_node *np,
322                                                         void __iomem *base,
323                                                         unsigned long nr_plls)
324 {
325         struct visconti_pll_provider *ctx;
...
328         ctx = kzalloc(struct_size(ctx, clk_data.hws, nr_plls), GFP_KERNEL);

`struct_size(ctx, clk_data.hws, nr_plls)` above translates to
sizeof(struct visconti_pll_provider) + sizeof(struct clk_hw *) * 7 ==
24 + 8 * 7 == 24 + 56
  ^^^^
   |
allocated bytes for flex array `hws`

$ pahole -C visconti_pll_provider drivers/clk/visconti/pll.o
struct visconti_pll_provider {
void *                     reg_base;             /*     0     8 */
struct clk_hw_onecell_data clk_data;             /*     8     8 */
struct device_node *       node;                 /*    16     8 */

/* size: 24, cachelines: 1, members: 3 */
/* last cacheline: 24 bytes */
};

And then, after the allocation, some data is written into all members
of `struct visconti_pll_provider`:

332         for (i = 0; i < nr_plls; ++i)
333                 ctx->clk_data.hws[i] = ERR_PTR(-ENOENT);
334
335         ctx->node = np;
336         ctx->reg_base = base;
337         ctx->clk_data.num = nr_plls;

Fix all these by placing the declaration of object `clk_data` at the
end of `struct visconti_pll_provider`. Also, add a comment to make it
clear that this object must always be last in the structure, and
prevent this bug from being introduced again in the future.

-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.

Fixes: b4cbe606dc36 ("clk: visconti: Add support common clock driver and reset driver")
Cc: stable@vger.kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/57a831d94ee2b3889b11525d4ad500356f89576f.1697492890.git.gustavoars@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: socfpga: Fix undefined behavior bug in struct stratix10_clock_data

commit d761bb01c85b22d5b44abe283eb89019693f6595 upstream.

`struct clk_hw_onecell_data` is a flexible structure, which means that
it contains flexible-array member at the bottom, in this case array
`hws`:

include/linux/clk-provider.h:
1380 struct clk_hw_onecell_data {
1381         unsigned int num;
1382         struct clk_hw *hws[] __counted_by(num);
1383 };

This could potentially lead to an overwrite of the objects following
`clk_data` in `struct stratix10_clock_data`, in this case
`void __iomem *base;` at run-time:

drivers/clk/socfpga/stratix10-clk.h:
  9 struct stratix10_clock_data {
 10         struct clk_hw_onecell_data      clk_data;
 11         void __iomem            *base;
 12 };

There are currently three different places where memory is allocated for
`struct stratix10_clock_data`, including the flex-array `hws` in
`struct clk_hw_onecell_data`:

drivers/clk/socfpga/clk-agilex.c:
469         clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
470                                 num_clks), GFP_KERNEL);

drivers/clk/socfpga/clk-agilex.c:
509         clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
510                                 num_clks), GFP_KERNEL);

drivers/clk/socfpga/clk-s10.c:
400         clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
401                                                  num_clks), GFP_KERNEL);

I'll use just one of them to describe the issue. See below.

Notice that a total of 440 bytes are allocated for flexible-array member
`hws` at line 469:

include/dt-bindings/clock/agilex-clock.h:
 70 #define AGILEX_NUM_CLKS 55

drivers/clk/socfpga/clk-agilex.c:
459         struct stratix10_clock_data *clk_data;
460         void __iomem *base;
...
466
467         num_clks = AGILEX_NUM_CLKS;
468
469         clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
470                                 num_clks), GFP_KERNEL);

`struct_size(clk_data, clk_data.hws, num_clks)` above translates to
sizeof(struct stratix10_clock_data) + sizeof(struct clk_hw *) * 55 ==
16 + 8 * 55 == 16 + 440
    ^^^
     |
allocated bytes for flex-array `hws`

474         for (i = 0; i < num_clks; i++)
475                 clk_data->clk_data.hws[i] = ERR_PTR(-ENOENT);
476
477         clk_data->base = base;

and then some data is written into both `hws` and `base` objects.

Fix this by placing the declaration of object `clk_data` at the end of
`struct stratix10_clock_data`. Also, add a comment to make it clear
that this object must always be last in the structure.

-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.

Fixes: ba7e258425ac ("clk: socfpga: Convert to s10/agilex/n5x to use clk_hw")
Cc: stable@vger.kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/1da736106d8e0806aeafa6e471a13ced490eae22.1698117815.git.gustavoars@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powercap: intel_rapl: Downgrade BIOS locked limits pr_warn() to pr_debug()

commit a60ec4485f1c72dfece365cf95e6de82bdd74300 upstream.

Before the refactoring the pr_warn() only triggered when
someone explicitly tried to write to a BIOS locked limit.
After the refactoring the warning is also triggering during
system resume. The user can't do anything about this so
printing scary warnings doesn't make sense

Keep the printk but make it pr_debug() instead of pr_warn()
to make it clear it's not a serious issue.

Fixes: 9050a9cd5e4c ("powercap: intel_rapl: Cleanup Power Limits support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: stats: Fix buffer overflow detection in trans_stats()

commit ea167a7fc2426f7685c3735e104921c1a20a6d3f upstream.

Commit 3c0897c180c6 ("cpufreq: Use scnprintf() for avoiding potential
buffer overflow") switched from snprintf to the more secure scnprintf
but never updated the exit condition for PAGE_SIZE.

As the commit say and as scnprintf document, what scnprintf returns what
is actually written not counting the '\0' end char. This results in the
case of len exceeding the size, len set to PAGE_SIZE - 1, as it can be
written at max PAGE_SIZE - 1 (as '\0' is not counted)

Because of len is never set to PAGE_SIZE, the function never break early,
never prints the warning and never return -EFBIG.

Fix this by changing the condition to PAGE_SIZE - 1 to correctly trigger
the error.

Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Fixes: 3c0897c180c6 ("cpufreq: Use scnprintf() for avoiding potential buffer overflow")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc/power: Add power soft-off when running on qemu

commit d0c219472980d15f5cbc5c8aec736848bda3f235 upstream.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc/pdc: Add width field to struct pdc_model

commit 6240553b52c475d9fc9674de0521b77e692f3764 upstream.

PDC2.0 specifies the additional PSW-bit field.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc/agp: Use 64-bit LE values in SBA IOMMU PDIR table

commit 86bb854d134f4429feb35d2e05f55c6e036770d2 upstream.

The PDIR table of the System Bus Adapter (SBA) I/O MMU uses 64-bit
little-endian pointers.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pmdomain: imx: Make imx pgc power domain also set the fwnode

commit 374de39d38f97b0e58cfee88da590b2d056ccf7f upstream.

Currently, The imx pgc power domain doesn't set the fwnode
pointer, which results in supply regulator device can't get
consumer imx pgc power domain device from fwnode when creating
a link.

This causes the driver core to instead try to create a link
between the parent gpc device of imx pgc power domain device and
supply regulator device. However, at this point, the gpc device
has already been bound, and the link creation will fail. So adding
the fwnode pointer to the imx pgc power domain device will fix
this issue.

Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Tested-by: Emil Kronborg <emil.kronborg@protonmail.com>
Fixes: 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231020185949.537083-1-pengfei.li_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n

commit d35686444fc80950c731e33a2f6ad4a55822be9b upstream.

The counting of module PLTs has been broken when CONFIG_RANDOMIZE_BASE=n
since commit:

  3e35d303ab7d22c4 ("arm64: module: rework module VA range selection")

Prior to that commit, when CONFIG_RANDOMIZE_BASE=n, the kernel image and
all modules were placed within a 128M region, and no PLTs were necessary
for B or BL. Hence count_plts() and partition_branch_plt_relas() skipped
handling B and BL when CONFIG_RANDOMIZE_BASE=n.

After that commit, modules can be placed anywhere within a 2G window
regardless of CONFIG_RANDOMIZE_BASE, and hence PLTs may be necessary for
B and BL even when CONFIG_RANDOMIZE_BASE=n. Unfortunately that commit
failed to update count_plts() and partition_branch_plt_relas()
accordingly.

Due to this, module_emit_plt_entry() may fail if an insufficient number
of PLT entries have been reserved, resulting in modules failing to load
with -ENOEXEC.

Fix this by counting PLTs regardless of CONFIG_RANDOMIZE_BASE in
count_plts() and partition_branch_plt_relas().

Fixes: 3e35d303ab7d ("arm64: module: rework module VA range selection")
Signed-off-by: Maria Yu <quic_aiquny@quicinc.com>
Cc: <stable@vger.kernel.org> # 6.5.x
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Fixes: 3e35d303ab7d ("arm64: module: rework module VA range selection")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231024010954.6768-1-quic_aiquny@quicinc.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer

commit 146a15b873353f8ac28dc281c139ff611a3c4848 upstream.

Prior to LLVM 15.0.0, LLVM's integrated assembler would incorrectly
byte-swap NOP when compiling for big-endian, and the resulting series of
bytes happened to match the encoding of FNMADD S21, S30, S0, S0.

This went unnoticed until commit:

  34f66c4c4d5518c1 ("arm64: Use a positive cpucap for FP/SIMD")

Prior to that commit, the kernel would always enable the use of FPSIMD
early in boot when __cpu_setup() initialized CPACR_EL1, and so usage of
FNMADD within the kernel was not detected, but could result in the
corruption of user or kernel FPSIMD state.

After that commit, the instructions happen to trap during boot prior to
FPSIMD being detected and enabled, e.g.

| Unhandled 64-bit el1h sync exception on CPU0, ESR 0x000000001fe00000 -- ASIMD
| CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1
| Hardware name: linux,dummy-virt (DT)
| pstate: 400000c9 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __pi_strcmp+0x1c/0x150
| lr : populate_properties+0xe4/0x254
| sp : ffffd014173d3ad0
| x29: ffffd014173d3af0 x28: fffffbfffddffcb8 x27: 0000000000000000
| x26: 0000000000000058 x25: fffffbfffddfe054 x24: 0000000000000008
| x23: fffffbfffddfe000 x22: fffffbfffddfe000 x21: fffffbfffddfe044
| x20: ffffd014173d3b70 x19: 0000000000000001 x18: 0000000000000005
| x17: 0000000000000010 x16: 0000000000000000 x15: 00000000413e7000
| x14: 0000000000000000 x13: 0000000000001bcc x12: 0000000000000000
| x11: 00000000d00dfeed x10: ffffd414193f2cd0 x9 : 0000000000000000
| x8 : 0101010101010101 x7 : ffffffffffffffc0 x6 : 0000000000000000
| x5 : 0000000000000000 x4 : 0101010101010101 x3 : 000000000000002a
| x2 : 0000000000000001 x1 : ffffd014171f2988 x0 : fffffbfffddffcb8
| Kernel panic - not syncing: Unhandled exception
| CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1
| Hardware name: linux,dummy-virt (DT)
| Call trace:
|  dump_backtrace+0xec/0x108
|  show_stack+0x18/0x2c
|  dump_stack_lvl+0x50/0x68
|  dump_stack+0x18/0x24
|  panic+0x13c/0x340
|  el1t_64_irq_handler+0x0/0x1c
|  el1_abort+0x0/0x5c
|  el1h_64_sync+0x64/0x68
|  __pi_strcmp+0x1c/0x150
|  unflatten_dt_nodes+0x1e8/0x2d8
|  __unflatten_device_tree+0x5c/0x15c
|  unflatten_device_tree+0x38/0x50
|  setup_arch+0x164/0x1e0
|  start_kernel+0x64/0x38c
|  __primary_switched+0xbc/0xc4

Restrict CONFIG_CPU_BIG_ENDIAN to a known good assembler, which is
either GNU as or LLVM's IAS 15.0.0 and newer, which contains the linked
commit.

Closes: https://github.com/ClangBuiltLinux/linux/issues/1948
Link: https://github.com/llvm/llvm-project/commit/1379b150991f70a5782e9a143c2ba5308da1161c
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231025-disable-arm64-be-ias-b4-llvm-15-v1-1-b25263ed8b23@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pmdomain: amlogic: Fix mask for the second NNA mem PD domain

commit b131329b9bfbd1b4c0c5e088cb0c6ec03a12930f upstream.

Without this change, the NPU hangs when the 8th NN core is used.

It matches what the out-of-tree driver does.

Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Fixes: 9a217b7e8953 ("soc: amlogic: meson-pwrc: Add NNA power domain for A311D")
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231016080205.41982-2-tomeu@tomeuvizoso.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: keystone: Don't discard .probe() callback

commit 7994db905c0fd692cf04c527585f08a91b560144 upstream.

The __init annotation makes the ks_pcie_probe() function disappear after
booting completes. However a device can also be bound later. In that case,
we try to call ks_pcie_probe(), but the backing memory is likely already
overwritten.

The right thing to do is do always have the probe callback available.  Note
that the (wrong) __refdata annotation prevented this issue to be noticed by
modpost.

Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver")
Link: https://lore.kernel.org/r/20231001170254.2506508-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: keystone: Don't discard .remove() callback

commit 200bddbb3f5202bbce96444fdc416305de14f547 upstream.

With CONFIG_PCIE_KEYSTONE=y and ks_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.

The right thing to do is do always have the remove callback available.
Note that this driver cannot be compiled as a module, so ks_pcie_remove()
was always discarded before this change and modpost couldn't warn about
this issue. Furthermore the __ref annotation also prevents a warning.

Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver")
Link: https://lore.kernel.org/r/20231001170254.2506508-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: trusted: Rollback init_trusted() consistently

commit 31de287345f41bbfaec36a5c8cbdba035cf76442 upstream.

Do bind neither static calls nor trusted_key_exit() before a successful
init, in order to maintain a consistent state. In addition, depart the
init_trusted() in the case of a real error (i.e. getting back something
else than -ENODEV).

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/linux-integrity/CAHk-=whOPoLaWM8S8GgoOPT7a2+nMH5h3TLKtn=R_3w4R1_Uvg@mail.gmail.com/
Cc: stable@vger.kernel.org # v5.13+
Fixes: 5d0682be3189 ("KEYS: trusted: Add generic trusted keys framework")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: trusted: tee: Refactor register SHM usage

commit c745cd1718b7825d69315fe7127e2e289e617598 upstream.

The OP-TEE driver using the old SMC based ABI permits overlapping shared
buffers, but with the new FF-A based ABI each physical page may only
be registered once.

As the key and blob buffer are allocated adjancently, there is no need
for redundant register shared memory invocation. Also, it is incompatibile
with FF-A based ABI limitation. So refactor register shared memory
implementation to use only single invocation to register both key and blob
buffers.

[jarkko: Added cc to stable.]
Cc: stable@vger.kernel.org # v5.16+
Fixes: 4615e5a34b95 ("optee: add FF-A support")
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pmdomain: bcm: bcm2835-power: check if the ASB register is equal to enable

commit 2e75396f1df61e1f1d26d0d703fc7292c4ae4371 upstream.

The commit c494a447c14e ("soc: bcm: bcm2835-power: Refactor ASB control")
refactored the ASB control by using a general function to handle both
the enable and disable. But this patch introduced a subtle regression:
we need to check if !!(readl(base + reg) & ASB_ACK) == enable, not just
check if (readl(base + reg) & ASB_ACK) == true.

Currently, this is causing an invalid register state in V3D when
unloading and loading the driver, because `bcm2835_asb_disable()` will
return -ETIMEDOUT and `bcm2835_asb_power_off()` will fail to disable the
ASB slave for V3D.

Fixes: c494a447c14e ("soc: bcm: bcm2835-power: Refactor ASB control")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231024101251.6357-2-mcanal@igalia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/core: Fix RQCF_ACT_SKIP leak

commit 5ebde09d91707a4a9bec1e3d213e3c12ffde348f upstream.

Igor Raits and Bagas Sanjaya report a RQCF_ACT_SKIP leak warning.

This warning may be triggered in the following situations:

    CPU0                                      CPU1

__schedule()
  *rq->clock_update_flags <<= 1;*   unregister_fair_sched_group()
  pick_next_task_fair+0x4a/0x410      destroy_cfs_bandwidth()
    newidle_balance+0x115/0x3e0       for_each_possible_cpu(i) *i=0*
      rq_unpin_lock(this_rq, rf)      __cfsb_csd_unthrottle()
      raw_spin_rq_unlock(this_rq)
                                      rq_lock(*CPU0_rq*, &rf)
                                      rq_clock_start_loop_update()
                                      rq->clock_update_flags & RQCF_ACT_SKIP <--
      raw_spin_rq_lock(this_rq)

The purpose of RQCF_ACT_SKIP is to skip the update rq clock,
but the update is very early in __schedule(), but we clear
RQCF_*_SKIP very late, causing it to span that gap above
and triggering this warning.

In __schedule() we can clear the RQCF_*_SKIP flag immediately
after update_rq_clock() to avoid this RQCF_ACT_SKIP leak warning.
And set rq->clock_update_flags to RQCF_UPDATED to avoid
rq->clock_update_flags < RQCF_ACT_SKIP warning that may be triggered later.

Fixes: ebb83d84e49b ("sched/core: Avoid multiple calling update_rq_clock() in __cfsb_csd_unthrottle()")
Closes: https://lore.kernel.org/all/20230913082424.73252-1-jiahao.os@bytedance.com
Reported-by: Igor Raits <igor.raits@gmail.com>
Reported-by: Bagas Sanjaya <bagasdotme@gmail.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/a5dd536d-041a-2ce9-f4b7-64d8d85c86dc@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq/generic_chip: Make irq_remove_generic_chip() irqdomain aware

commit 5e7afb2eb7b2a7c81e9f608cbdf74a07606fd1b5 upstream.

irq_remove_generic_chip() calculates the Linux interrupt number for removing the
handler and interrupt chip based on gc::irq_base as a linear function of
the bit positions of set bits in the @msk argument.

When the generic chip is present in an irq domain, i.e. created with a call
to irq_alloc_domain_generic_chips(), gc::irq_base contains not the base
Linux interrupt number.  It contains the base hardware interrupt for this
chip. It is set to 0 for the first chip in the domain, 0 + N for the next
chip, where $N is the number of hardware interrupts per chip.

That means the Linux interrupt number cannot be calculated based on
gc::irq_base for irqdomain based chips without a domain map lookup, which
is currently missing.

Rework the code to take the irqdomain case into account and calculate the
Linux interrupt number by a irqdomain lookup of the domain specific
hardware interrupt number.

[ tglx: Massage changelog. Reshuffle the logic and add a proper comment. ]

Fixes: cfefd21e693d ("genirq: Add chip suspend and resume callbacks")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231024150335.322282-1-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: meson-gx: Remove setting of CMD_CFG_ERROR

commit 57925e16c9f7d18012bcf45bfa658f92c087981a upstream.

For the t7 and older SoC families, the CMD_CFG_ERROR has no effect.
Starting from SoC family C3, setting this bit without SG LINK data
address will cause the controller to generate an IRQ and stop working.

To fix it, don't set the bit CMD_CFG_ERROR anymore.

Fixes: 18f92bc02f17 ("mmc: meson-gx: make sure the descriptor is stopped on errors")
Signed-off-by: Rong Chen <rong.chen@amlogic.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231026073156.2868310-1-rong.chen@amlogic.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: ath12k: fix dfs-radar and temperature event locking

commit 69bd216e049349886405b1c87a55dce3d35d1ba7 upstream.

The ath12k active pdevs are protected by RCU but the DFS-radar and
temperature event handling code calling ath12k_mac_get_ar_by_pdev_id()
was not marked as a read-side critical section.

Mark the code in question as RCU read-side critical sections to avoid
any potential use-after-free issues.

Note that the temperature event handler looks like a place holder
currently but would still trigger an RCU lockdep splat.

Compile tested only.

Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Cc: stable@vger.kernel.org # v6.2
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019113650.9060-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: ath12k: fix htt mlo-offset event locking

commit 6afc57ea315e0f660b1f870a681737bb7b71faef upstream.

The ath12k active pdevs are protected by RCU but the htt mlo-offset
event handling code calling ath12k_mac_get_ar_by_pdev_id() was not
marked as a read-side critical section.

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Compile tested only.

Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Cc: stable@vger.kernel.org # v6.2
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019113650.9060-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: ath11k: fix gtk offload status event locking

commit 1dea3c0720a146bd7193969f2847ccfed5be2221 upstream.

The ath11k active pdevs are protected by RCU but the gtk offload status
event handling code calling ath11k_mac_get_arvif_by_vdev_id() was not
marked as a read-side critical section.

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Compile tested only.

Fixes: a16d9b50cfba ("ath11k: support GTK rekey offload")
Cc: stable@vger.kernel.org # 5.18
Cc: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019155342.31631-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: ath11k: fix htt pktlog locking

commit 3f77c7d605b29df277d77e9ee75d96e7ad145d2d upstream.

The ath11k active pdevs are protected by RCU but the htt pktlog handling
code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section.

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Compile tested only.

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org # 5.6
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019112521.2071-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: ath11k: fix dfs radar event locking

commit 3b6c14833165f689cc5928574ebafe52bbce5f1e upstream.

The ath11k active pdevs are protected by RCU but the DFS radar event
handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section.

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Compile tested only.

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org # 5.6
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019153115.26401-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: ath11k: fix temperature event locking

commit 1a5352a81b4720ba43d9c899974e3bddf7ce0ce8 upstream.

The ath11k active pdevs are protected by RCU but the temperature event
handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section as reported by RCU lockdep:

=============================
WARNING: suspicious RCU usage
6.6.0-rc6 #7 Not tainted
-----------------------------
drivers/net/wireless/ath/ath11k/mac.c:638 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/0/0.
...
Call trace:
...
 lockdep_rcu_suspicious+0x16c/0x22c
 ath11k_mac_get_ar_by_pdev_id+0x194/0x1b0 [ath11k]
 ath11k_wmi_tlv_op_rx+0xa84/0x2c1c [ath11k]
 ath11k_htc_rx_completion_handler+0x388/0x510 [ath11k]

Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.

Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Fixes: a41d10348b01 ("ath11k: add thermal sensor device support")
Cc: stable@vger.kernel.org # 5.7
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019153115.26401-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regmap: Ensure range selector registers are updated after cache sync

commit 0ec7731655de196bc1e4af99e495b38778109d22 upstream.

When we sync the register cache we do so with the cache bypassed in order
to avoid overhead from writing the synced values back into the cache. If
the regmap has ranges and the selector register for those ranges is in a
register which is cached this has the unfortunate side effect of meaning
that the physical and cached copies of the selector register can be out of
sync after a cache sync. The cache will have whatever the selector was when
the sync started and the hardware will have the selector for the register
that was synced last.

Fix this by rewriting all cached selector registers after every sync,
ensuring that the hardware and cache have the same content. This will
result in extra writes that wouldn't otherwise be needed but is simple
so hopefully robust. We don't read from the hardware since not all
devices have physical read support.

Given that nobody noticed this until now it is likely that we are rarely if
ever hitting this case.

Reported-by: Hector Martin <marcan@marcan.st>
Cc: stable@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231026-regmap-fix-selector-sync-v1-1-633ded82770d@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: resource: Do IRQ override on TongFang GMxXGxx

commit 0da9eccde3270b832c059ad618bf66e510c75d33 upstream.

The TongFang GMxXGxx/TUXEDO Stellaris/Pollaris Gen5 needs IRQ overriding
for the keyboard to work.

Adding an entry for this laptop to the override_table makes the internal
keyboard functional.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Add nop instructions after TLB inserts

commit ad4aa06e1d92b06ed56c7240252927bd60632efe upstream.

An excerpt from the PA8800 ERS states:

* The PA8800 violates the seven instruction pipeline rule when performing
  TLB inserts or PxTLBE instructions with the PSW C bit on. The instruction
  will take effect by the 12th instruction after the insert or purge.

I believe we have a problem with handling TLB misses. We don't fill
the pipeline following TLB inserts. As a result, we likely fault again
after returning from the interruption.

The above statement indicates that we need at least seven instructions
after the insert on pre PA8800 processors and we need 12 instructions
on PA8800/PA8900 processors.

Here we add macros and code to provide the required number instructions
after a TLB insert.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Suggested-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon/sysfs: check error from damon_sysfs_update_target()

commit b4936b544b08ed44949055b92bd25f77759ebafc upstream.

Patch series "mm/damon/sysfs: fix unhandled return values".

Some of DAMON sysfs interface code is not handling return values from some
functions.  As a result, confusing user input handling or NULL-dereference
is possible.  Check those properly.

This patch (of 3):

damon_sysfs_update_target() returns error code for failures, but its
caller, damon_sysfs_set_targets() is ignoring that.  The update function
seems making no critical change in case of such failures, but the behavior
will look like DAMON sysfs is silently ignoring or only partially
accepting the user input.  Fix it.

Link: https://lkml.kernel.org/r/20231106233408.51159-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231106233408.51159-2-sj@kernel.org
Fixes: 19467a950b49 ("mm/damon/sysfs: remove requested targets when online-commit inputs")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon/core.c: avoid unintentional filtering out of schemes

commit 13b2a4b22e98ff80b888a160a2acd92d81b05925 upstream.

The function '__damos_filter_out()' causes DAMON to always filter out
schemes whose filter type is anon or memcg if its matching value is set
to false.

This commit addresses the issue by ensuring that '__damos_filter_out()'
no longer applies to filters whose type is 'anon' or 'memcg'.

Link: https://lkml.kernel.org/r/1699594629-3816-1-git-send-email-hyeongtak.ji@gmail.com
Fixes: ab9bda001b681 ("mm/damon/core: introduce address range type damos filter")
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon/sysfs-schemes: handle tried regions sysfs directory allocation failure

commit 84055688b6bc075c92a88e2d6c3ad26ab93919f9 upstream.

DAMOS tried regions sysfs directory allocation function
(damon_sysfs_scheme_regions_alloc()) is not handling the memory allocation
failure.  In the case, the code will dereference NULL pointer.  Handle the
failure to avoid such invalid access.

Link: https://lkml.kernel.org/r/20231106233408.51159-3-sj@kernel.org
Fixes: 9277d0367ba1 ("mm/damon/sysfs-schemes: implement scheme region directory")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon/sysfs-schemes: handle tried region directory allocation failure

commit ae636ae2bbfd9279f5681dbf320d1da817e52b68 upstream.

DAMON sysfs interface's before_damos_apply callback
(damon_sysfs_before_damos_apply()), which creates the DAMOS tried regions
for each DAMOS action applied region, is not handling the allocation
failure for the sysfs directory data.  As a result, NULL pointer
derefeence is possible.  Fix it by handling the case.

Link: https://lkml.kernel.org/r/20231106233408.51159-4-sj@kernel.org
Fixes: f1d13cacabe1 ("mm/damon/sysfs: implement DAMOS tried regions update command")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon/core: avoid divide-by-zero during monitoring results update

commit d35963bfb05877455228ecec6b194f624489f96a upstream.

When monitoring attributes are changed, DAMON updates access rate of the
monitoring results accordingly.  For that, it divides some values by the
maximum nr_accesses.  However, due to the type of the related variables,
simple division-based calculation of the divisor can return zero.  As a
result, divide-by-zero is possible.  Fix it by using
damon_max_nr_accesses(), which handles the case.

Link: https://lkml.kernel.org/r/20231019194924.100347-3-sj@kernel.org
Fixes: 2f5bef5a590b ("mm/damon/core: update monitoring results for new monitoring attributes")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> [6.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon: implement a function for max nr_accesses safe calculation

commit 35f5d94187a6a3a8df2cba54beccca1c2379edb8 upstream.

Patch series "avoid divide-by-zero due to max_nr_accesses overflow".

The maximum nr_accesses of given DAMON context can be calculated by
dividing the aggregation interval by the sampling interval.  Some logics
in DAMON uses the maximum nr_accesses as a divisor.  Hence, the value
shouldn't be zero.  Such case is avoided since DAMON avoids setting the
agregation interval as samller than the sampling interval.  However, since
nr_accesses is unsigned int while the intervals are unsigned long, the
maximum nr_accesses could be zero while casting.

Avoid the divide-by-zero by implementing a function that handles the
corner case (first patch), and replaces the vulnerable direct max
nr_accesses calculations (remaining patches).

Note that the patches for the replacements are divided for broken commits,
to make backporting on required tres easier.  Especially, the last patch
is for a patch that not yet merged into the mainline but in mm tree.

This patch (of 4):

The maximum nr_accesses of given DAMON context can be calculated by
dividing the aggregation interval by the sampling interval.  Some logics
in DAMON uses the maximum nr_accesses as a divisor.  Hence, the value
shouldn't be zero.  Such case is avoided since DAMON avoids setting the
agregation interval as samller than the sampling interval.  However, since
nr_accesses is unsigned int while the intervals are unsigned long, the
maximum nr_accesses could be zero while casting.  Implement a function
that handles the corner case.

Note that this commit is not fixing the real issue since this is only
introducing the safe function that will replaces the problematic
divisions.  The replacements will be made by followup commits, to make
backporting on stable series easier.

Link: https://lkml.kernel.org/r/20231019194924.100347-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231019194924.100347-2-sj@kernel.org
Fixes: 198f0f4c58b9 ("mm/damon/vaddr,paddr: support pageout prioritization")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> [5.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon/ops-common: avoid divide-by-zero during region hotness calculation

commit 3bafc47d3c4a2fc4d3b382aeb3c087f8fc84d9fd upstream.

When calculating the hotness of each region for the under-quota regions
prioritization, DAMON divides some values by the maximum nr_accesses.
However, due to the type of the related variables, simple division-based
calculation of the divisor can return zero.  As a result, divide-by-zero
is possible.  Fix it by using damon_max_nr_accesses(), which handles the
case.

Link: https://lkml.kernel.org/r/20231019194924.100347-4-sj@kernel.org
Fixes: 198f0f4c58b9 ("mm/damon/vaddr,paddr: support pageout prioritization")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> [5.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>