Olof Johansson [Sat, 26 Sep 2020 17:17:03 +0000 (10:17 -0700)]
Merge tag 'imx-dt-5.10' of git://git./linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm32 device tree change for 5.10:
- New board/device support: Tolino Shine 2 HD, TQMa6 SoM, Y Soft IOTA
Orion board.
- update GPMI NAND node name to nand-controller for aligning with DT
schema.
- Remove the legacy fsl,spi-num-chipselects property from a few board.
- A series to update imx6q-logicpd support, using GPIO chipselect,
adding board compatible string, and enabling DTB build for the board.
- Complete RNG device node in i.MX6SL device tree, and add RNG node for
i.MX6SLL and i.MX6ULL.
- Correct interrupt flags for imx6qdl-gw5xxx boards.
- Add missing enet_out clock for i.MX6Q/DL Ethernet device.
- Enable PCIe support for imx6qp-sabreauto board.
- A series from Shengjiu Wang to add audio sound card for imx7d-sdb and
imx6sll-evk board, add headphone detection for sound card on a few NXP
development boards.
- A couple of minor fix-ups on i.MX25 pin functions.
- Some random update on various boards.
* tag 'imx-dt-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits)
ARM: dts: imx6qdl-gw5xxx: correct interrupt flags
ARM: dts: imx6q-logicpd: Use GPIO chipselect
ARM: dts: imx: Add an entry for imx6q-logicpd.dtb
ARM: dts: imx6q-logicpd: Add a specific board compatible string
ARM: dts: imx6q: align GPIO hog names with dtschema
ARM: dts: imx6qdl-tqma6: fix LM75 compatible string
ARM: dts: imx6qdl-tqma6: remove obsolete fsl,spi-num-chipselects
ARM: dts: imx6qdl-tqma6: fix indentation
ARM: dts: imx28-m28: Align GPMI NAND node name with schema
ARM: dts: imx6qdl: add enet_out clk support
ARM: dts: imx6qdl: move iomuxc compatible assignment out of root node
ARM: dts: vf: Fix PCA95xx GPIO expander properties on ZII CFU1
ARM: dts: imx: add devicetree for Tolino Shine 2 HD
ARM: dts: imx6qdl-gw553x: Remove unneeded #address-cells/#size-cells
ARM: dts: imx6sll-evk: Add audio sound card node
ARM: dts: imx6sl-evk: Add headphone detection for sound card
ARM: dts: imx6sx-sdb: Add headphone detection for sound card
ARM: dts: imx6q-kontron-samx6i: Remove old fsl,spi-num-chipselects
ARM: dts: imx: Fix the SPI chipselect polarity
ARM: dts: imx25-pinfunc: Fix GPT function names
...
Link: https://lore.kernel.org/r/20200923073009.23678-4-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 26 Sep 2020 17:15:52 +0000 (10:15 -0700)]
Merge tag 'imx-bindings-5.10' of git://git./linux/kernel/git/shawnguo/linux into arm/dt
i.MX DT bindings update for 5.10:
- Various board compatible string additions to fsl.ymal.
- Update Vybrid OCOTP binding for syscon compatible string, which is
required to access the UID.
* tag 'imx-bindings-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add binding for Variscite Symphony board with VAR-SOM-MX8MN
dt-bindings: arm: fsl: Add PHYTEC i.MX6 devicetree bindings
dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings
dt-bindings: arm: fsl: Add an entry for the i.MX6 LogicPD board
dt-bindings: arm: fsl: Fix matching Purism Librem5 phones
dt-bindings: arm: fsl: Add imx8mm ddr4 evk board
dt-bindings: arm: fsl: add compatible string for Tolino Shine 2 HD
dt-bindings: nvmem: Add syscon to Vybrid OCOTP driver
dt-bindings: arm: fsl: Add binding for Variscite Symphony board with VAR-SOM-MX8MM
dt-bindings: arm: fsl: Add binding for Variscite VAR-SOM-MX8MM module
dt-bindings: arm: fsl: Add ZII Ultra boards binding
dt-bindings: arm: fsl: Fix Toradex Colibri i.MX 8 binding
dt-bindings: arm: fsl: Add Beacon i.MX8M Mini Development Kit binding
dt-bindings: arm: fsl: Add the librem 5 phone
dt-bindings: arm: fsl: Add Y Soft IOTA Orion board
Link: https://lore.kernel.org/r/20200923073009.23678-3-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 26 Sep 2020 17:15:11 +0000 (10:15 -0700)]
Merge tag 'ti-k3-dt-for-v5.10' of git://git./linux/kernel/git/nmenon/linux into arm/dt
Device tree updates towards 5.10-rc1 for TI K3 platform.
* tag 'ti-k3-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (23 commits)
arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances
arm64: dts: ti: k3-j721e-main: Add PCIe device tree nodes
arm64: dts: ti: k3-*: Fix up node_name_chars_strict warnings
arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name
arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640
arm64: dts: ti: k3-*: Use generic pinctrl for node names
arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names
arm64: dts: ti: k3-am65*: Use generic gpio for node names
arm64: dts: ti: k3-am65-main: Use lower case hexadecimal
arm64: dts: ti: k3-j721e: Use lower case hexadecimal
arm64: dts: ti: k3-am65: restrict PCIe to Gen2 speed
arm64: dts: ti: k3-j721e-som-p0: Reserve memory for IPC between RTOS cores
arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for C71x DSP
arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to C71x DSP
arm64: dts: ti: k3-j721e-main: Add C71x DSP node
arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for C66 DSPs
arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to C66x DSPs
arm64: dts: ti: k3-j721e-main: Add C66x DSP nodes
arm64: dts: ti: k3-j721e-som-p0: Move mailbox nodes from board dts file
arm64: dts: ti: k3-j721e-main: Add crypto accelerator node
...
Link: https://lore.kernel.org/r/20200922134722.2y5kqxu4lghbwp5u@akan
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 26 Sep 2020 17:02:58 +0000 (10:02 -0700)]
Merge tag 'samsung-dt64-5.10-2' of https://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.10, part two
Minor cleanups: removal of undocumented I2S properties, alignment of OPP
table node name with dtschema.
* tag 'samsung-dt64-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Align OPP table name with dt-schema
arm64: dts: exynos: Remove undocumented i2s properties in Exynos5433
Link: https://lore.kernel.org/r/20200920160705.9651-4-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 26 Sep 2020 17:02:35 +0000 (10:02 -0700)]
Merge tag 'samsung-dt-5.10-2' of https://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.10, part two
1. Further cleanup of DTS with dtschema: s5pv210, s3c6410 and s3c24xx.
This fixes many minor dtschema violations, adds few missing
functionalities (like clock for RTC) and improves the code
maintainability in few places. Except the RTC clock, this should not
have visible impact.
2. Fix few remaining Exynos dtschema violations.
* tag 'samsung-dt-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (36 commits)
ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Goni
ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Aquila
ARM: dts: s5pv210: move fixed regulators under root node in Goni
ARM: dts: s5pv210: move fixed regulators under root node in Aquila
ARM: dts: exynos: Align OPP table name with dt-schema
ARM: dts: exynos: move assigned-clock* properties to i2s0 node in Odroid XU4
ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid
ARM: dts: exynos: add input clock to CMU in Exynos3250
ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416
ARM: dts: s3c24xx: add address to CPU node
ARM: dts: s3c24xx: align PWM/timer node name with dtschema
ARM: dts: s3c24xx: override nodes by label
ARM: dts: s3c24xx: fix number of PWM cells
ARM: dts: s3c6410: remove additional CPU compatible
ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410
ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410
ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410
ARM: dts: s3c6410: move fixed clocks under root node in Mini6410
ARM: dts: s5pv210: correct ethernet unit address in SMDKV210
ARM: dts: s5pv210: align SPI GPIO node name with dtschema in Aries
...
Link: https://lore.kernel.org/r/20200920160705.9651-3-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 26 Sep 2020 17:01:51 +0000 (10:01 -0700)]
Merge tag 'tegra-for-5.10-arm64-dt' of git://git./linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Changes for v5.10-rc1
This set of changes fixes some minor issues in existing device trees and
adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled
to allow them to be detected by software.
It also adds support for the Tegra234 VDK board, which is a pre-silicon
platform for the upcoming Orin SoC.
* tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Initial Tegra234 VDK support
arm64: tegra: Populate EEPROMs for Jetson Xavier NX
arm64: tegra: Add label properties for EEPROMs
arm64: tegra: Add DT binding for AHUB components
arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano
arm64: tegra: Properly size register regions for GPU on Tegra194
arm64: tegra: Use valid PWM period for VDD_GPU on Tegra210
arm64: tegra: Describe display controller outputs for Tegra210
arm64: tegra: Disable SD card write-protection on Jetson Nano
arm64: tegra: Add VBUS supply for micro USB port on Jetson Nano
arm64: tegra: Wire up pinctrl states for all DPAUX controllers
arm64: tegra: Add ID EEPROMs on Jetson AGX Xavier
Link: https://lore.kernel.org/r/20200918150303.3938852-5-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 26 Sep 2020 17:01:05 +0000 (10:01 -0700)]
Merge tag 'tegra-for-5.10-dt-bindings' of git://git./linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v5.10-rc1
This set of changes adds compatible strings for Tegra234 to existing
device tree bindings.
* tag 'tegra-for-5.10-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: power: supply: Add device-tree binding for Summit SMB3xx
dt-bindings: tegra: pmc: Add Tegra234 support
dt-bindings: fuse: tegra: Add Tegra234 support
dt-bindings: tegra: Add Tegra234 VDK compatible
dt-bindings: misc: tegra186-misc: Add Tegra234 support
dt-bindings: misc: tegra186-misc: Add missing compatible string
dt-bindings: misc: tegra-apbmisc: Add missing compatible strings
Link: https://lore.kernel.org/r/20200918150303.3938852-1-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 26 Sep 2020 16:59:51 +0000 (09:59 -0700)]
Merge tag 'renesas-dt-bindings-for-v5.10-tag1' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.10
- Document core support for the R-Car V3U (R8A779A0) SoC and the
Renesas Falcon CPU and BreakOut boards.
* tag 'renesas-dt-bindings-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Document Renesas Falcon boards
dt-bindings: reset: renesas,rst: Document r8a779a0 reset module
dt-bindings: power: renesas,rcar-sysc: Document r8a779a0 SYSC bindings
dt-bindings: arm: renesas: Document R-Car V3U SoC DT bindings
Link: https://lore.kernel.org/r/20200918124800.15555-5-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 26 Sep 2020 16:59:24 +0000 (09:59 -0700)]
Merge tag 'renesas-arm-dt-for-v5.10-tag2' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.10 (take two)
- PCIe endpoint support for the RZ/G2H SoC,
- SATA support for the HopeRun HiHope RZ/G2H board,
- Increase support (CAN, LED, SPI NOR, VIN, VSP) for the RZ/G1H SoC on
the iWave Qseven board (G21D), and its camera add-on board,
- Initial support for the R-Car V3U SoC on the Falcon CPU and BreakOut
boards,
- HDMI display and sound support for the R-Car M3-W+ SoC on the
Salvator-XS board,
- Digital Radio Interface (DRIF) support for the R-Car E3 SoC,
- Minor fixes and cleanups.
* tag 'renesas-arm-dt-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (24 commits)
arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channels
arm64: dts: renesas: r8a77990: Fix MSIOF1 DMA channels
arm64: dts: renesas: r8a77990: Add DRIF support
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add can0 support to camera DB
ARM: dts: r8a7742: Add VSP support
arm64: dts: renesas: Drop superfluous pin configuration containers
arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Sound support
arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Display support
arm64: dts: renesas: r8a77961: Add HDMI device nodes
arm64: dts: renesas: r8a77961: Add DU device nodes
arm64: dts: renesas: r8a77961: Add VSP device nodes
arm64: dts: renesas: r8a77961: Add FCP device nodes
arm64: dts: renesas: Fix pin controller node names
ARM: dts: renesas: Fix pin controller node names
arm64: dts: renesas: Add Renesas Falcon boards support
arm64: dts: renesas: Add Renesas R8A779A0 SoC support
ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication
ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board
ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support
ARM: dts: r8a7742: Add VIN DT nodes
...
Link: https://lore.kernel.org/r/20200918124800.15555-2-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Krzysztof Kozlowski [Thu, 17 Sep 2020 16:50:40 +0000 (18:50 +0200)]
arm64: dts: apm: add required gpio-cells to DW APB GPIO controller port
The Synopsys DesignWare APB GPIO controller port must have gpio-cells
property, as pointed by dtschema:
arch/arm64/boot/dts/apm/apm-mustang.dt.yaml: gpio@
1c024000: gpio-controller@0: '#gpio-cells' is a required property
Link: https://lore.kernel.org/r/20200917165040.22908-2-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Krzysztof Kozlowski [Thu, 17 Sep 2020 16:50:39 +0000 (18:50 +0200)]
arm64: dts: apm: drop unused reg-io-width from DW APB GPIO controller
The Synopsys DesignWare APB GPIO controller driver does not parse
reg-io-width and dtschema does not allow it so drop it to fix dtschema
warnings like:
arch/arm64/boot/dts/apm/apm-mustang.dt.yaml: gpio@
1c024000:
'reg-io-width' does not match any of the regexes: '^gpio-(port|controller)@[0-9a-f]+$', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20200917165040.22908-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Krzysztof Kozlowski [Thu, 17 Sep 2020 16:49:09 +0000 (18:49 +0200)]
ARM: dts: picoxcell: drop unused reg-io-width from DW APB GPIO controller
The Synopsys DesignWare APB GPIO controller driver does not parse
reg-io-width and dtschema does not allow it so drop it to fix dtschema
warnings like:
arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dt.yaml: gpio@20000:
'reg-io-width' does not match any of the regexes: '^gpio-(port|controller)@[0-9a-f]+$', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20200917164909.22490-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Krzysztof Kozlowski [Thu, 17 Sep 2020 16:39:57 +0000 (18:39 +0200)]
ARM: dts: picoxcell: build DTBs with make dtbs
Add ARCH_PICOXCELL entries to Makefil so the DTBs get built with
`make dtbs`.
Link: https://lore.kernel.org/r/20200917163957.21895-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 26 Sep 2020 16:48:35 +0000 (09:48 -0700)]
Merge tag 'at91-dt-5.10' of git://git./linux/kernel/git/at91/linux into arm/dt
AT91 DT for 5.10
- New board: GARDENA smart Gateway (Art. 19000)
- dtbs_check warnings fixes
* tag 'at91-dt-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama5d2: add missing flexcom spi node properties
ARM: dts: at91: add unit-address to memory node
ARM: dts: at91: move mmc pinctrl-names property to board dts
ARM: dts: at91: fix sram nodes
ARM: dts: at91: fix cpu node
ARM: at91: Add GARDENA smart Gateway (Art. 19000) support
dt-bindings: arm: at91: Add GARDENA smart Gateway (Art. 19000) board
Link: https://lore.kernel.org/r/20200916211348.GA275895@piout.net
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 26 Sep 2020 16:48:12 +0000 (09:48 -0700)]
Merge tag 'socfpga_dts_update_for_v5.10' of git://git./linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.10
- Increase shared-dma-pool size to 32MB
- Add ptp_ref clock properties to the ethernet nodes on Stratix10 and Agilex
* tag 'socfpga_dts_update_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: stratix10/agilex: add the ptp_ref clock
arm64: dts: agilex: increase shared memory size to 32Mb
Link: https://lore.kernel.org/r/20200916204422.30897-1-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 26 Sep 2020 16:47:47 +0000 (09:47 -0700)]
Merge tag 'ux500-dts-for-v5.10' of git://git./linux/kernel/git/linusw/linux-stericsson into arm/dt
Ux500 DTS updates for the v5.10 kernel cycle:
- Add the s6e63m0 display to the Golden device
- Add the KTD253 backlight to the Skomer device
- Update the LP5521 LED DTS entries for binding changes
* tag 'ux500-dts-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
ARM: dts: ux500-skomer: Add KTD253 backlight
ARM: dts: ux500-golden: Add S6E63M0 DSI display
Link: https://lore.kernel.org/r/CACRpkda=-cgFjN7K2vBU5x4uSYrohrZSbjqMnSFb3Qe2Az1W5g@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 26 Sep 2020 16:47:10 +0000 (09:47 -0700)]
Merge tag 'sparx5-dt-5.10' of https://github.com/microchip-ung/linux-upstream into arm/dt
Sparx5 DT updates for Linux 5.10
- Add public repo to MAINTAINERS
- Add SPI controller and devices
- Add eMMC controller and devices
- Add temperature sensor
* tag 'sparx5-dt-5.10' of https://github.com/microchip-ung/linux-upstream:
arm64: dts: sparx5: Add spi-nand devices
arm64: dts: sparx5: Add spi-nor support
arm64: dts: sparx5: Add SPI controller and associated mmio-mux
MAINTAINERS: Add git tree for Sparx5
arm64: dts: sparx5: Add hwmon temperature sensor
arm64: dts: sparx5: Add Sparx5 eMMC support
Link: https://lore.kernel.org/r/878sda2dj0.fsf@microchip.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 26 Sep 2020 16:46:29 +0000 (09:46 -0700)]
Merge tag 'hisi-arm32-dt-for-5.10' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM: DT: Hisilicon ARM32 SoCs DT updates for 5.10
- Update the SP804 nodes to have the correct clocks and
clock names for the hi3620 SoC
- Update the SP805 nodes to have the correct clocks and
clock names for the hix5hd2 SoC
* tag 'hisi-arm32-dt-for-5.10' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hisilicon: Fix SP805 clocks
ARM: dts: hisilicon: Fix SP804 users
Link: https://lore.kernel.org/r/5F617209.90003@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 26 Sep 2020 16:46:09 +0000 (09:46 -0700)]
Merge tag 'hisi-arm64-dt-for-5.10' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon ARM64 SoCs DT updates for 5.10
- Change the status properties from "ok" to "okay" for
all the hisilicon SoCs
- Update the SP805 nodes to have the correct clocks and
clock names for the hi3660 and hi6220 SoCs
* tag 'hisi-arm64-dt-for-5.10' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: Fix SP805 clocks
arm64: dts: hisilicon: replace status value "ok" by "okay"
Link: https://lore.kernel.org/r/5F617134.3050705@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Kishon Vijay Abraham I [Mon, 14 Sep 2020 15:21:15 +0000 (20:51 +0530)]
arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances
J721E Common Processor Board has PCIe connectors for the 1st three PCIe
instances. Configure the three PCIe instances in RC mode and disable the
4th PCIe instance.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20200914152115.1788-3-kishon@ti.com
Kishon Vijay Abraham I [Mon, 14 Sep 2020 15:21:14 +0000 (20:51 +0530)]
arm64: dts: ti: k3-j721e-main: Add PCIe device tree nodes
Add PCIe device tree nodes (both RC and EP) for the four
PCIe instances here.
Also add the missing translations required in the "ranges"
DT property of cbass_main to access all the four PCIe
instances.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20200914152115.1788-2-kishon@ti.com
Krzysztof Kozlowski [Sat, 19 Sep 2020 14:13:30 +0000 (16:13 +0200)]
dt-bindings: arm: fsl: Add binding for Variscite Symphony board with VAR-SOM-MX8MN
Add a binding for the Variscite Symphony evaluation kit board with
VAR-SOM-MX8MN System on Module.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Krzysztof Kozlowski [Thu, 17 Sep 2020 18:54:46 +0000 (20:54 +0200)]
ARM: dts: imx6qdl-gw5xxx: correct interrupt flags
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-By: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stefan Riedmueller [Thu, 17 Sep 2020 08:30:03 +0000 (10:30 +0200)]
dt-bindings: arm: fsl: Add PHYTEC i.MX6 devicetree bindings
Add devicetree bindings for i.MX6 based phyCORE-i.MX6, phyBOARD-Mira and
phyFLEX-i.MX6.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stefan Riedmueller [Thu, 17 Sep 2020 08:30:02 +0000 (10:30 +0200)]
dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings
Add devicetree bindings for i.MX6 UL/ULL based phyCORE-i.MX6 UL/ULL and
phyBOARD-Segin.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Sun, 13 Sep 2020 16:29:13 +0000 (13:29 -0300)]
ARM: dts: imx6q-logicpd: Use GPIO chipselect
Using the native SPI chipselect on i.MX6 is known to be problematic.
Doing it on a imx6q-sabresd causes the SPI NOR probe to fail:
[ 5.388704] spi-nor spi0.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
Use the GPIO chipselect to avoid such problem.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Sun, 13 Sep 2020 16:29:12 +0000 (13:29 -0300)]
ARM: dts: imx: Add an entry for imx6q-logicpd.dtb
Add an entry for imx6q-logicpd.dtb so that it can be built by default.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Sun, 13 Sep 2020 16:29:10 +0000 (13:29 -0300)]
ARM: dts: imx6q-logicpd: Add a specific board compatible string
It is standard practice to have a specific board compatible string, so
pass "logicpd,imx6q-logicpd".
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Sun, 13 Sep 2020 16:29:11 +0000 (13:29 -0300)]
dt-bindings: arm: fsl: Add an entry for the i.MX6 LogicPD board
Add an entry for the i.MX6 LogicPD board.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Krzysztof Kozlowski [Wed, 16 Sep 2020 15:57:15 +0000 (17:57 +0200)]
ARM: dts: imx6q: align GPIO hog names with dtschema
dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix. While
touching the hogs, fix indentation (spaces -> tabs).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Krzysztof Kozlowski [Fri, 4 Sep 2020 14:53:02 +0000 (16:53 +0200)]
dt-bindings: arm: fsl: Fix matching Purism Librem5 phones
All Purism Librem5 phones have three compatibles so they need their own
entry to fix dbts_check warnings like:
arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml: /:
compatible: ['purism,librem5r2', 'purism,librem5', 'fsl,imx8mq'] is not valid under any of the given schemas
arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml: /:
compatible: ['purism,librem5r2', 'purism,librem5', 'fsl,imx8mq'] is too long
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Thierry Reding [Thu, 17 Sep 2020 10:07:52 +0000 (12:07 +0200)]
arm64: tegra: Initial Tegra234 VDK support
The NVIDIA Tegra234 VDK is a simulation platform for the Orin SoC. It
supports a subset of the peripherals that will be available in the final
chip and serves as a bootstrapping platform.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
David Heidelberg [Thu, 13 Aug 2020 21:34:01 +0000 (00:34 +0300)]
dt-bindings: power: supply: Add device-tree binding for Summit SMB3xx
Summit SMB3xx series is a Programmable Switching Li+ Battery Charger.
This patch adds device-tree binding for Summit SMB345, SMB347 and SMB358
chargers.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 17 Sep 2020 10:07:44 +0000 (12:07 +0200)]
dt-bindings: tegra: pmc: Add Tegra234 support
The PMC found on Tegra234 is mostly similar to the one on Tegra194 but
supports slightly different I/O pads and wake events.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 17 Sep 2020 10:07:43 +0000 (12:07 +0200)]
dt-bindings: fuse: tegra: Add Tegra234 support
The Tegra234 FUSE block is very similar to that on prior chips but not
completely compatible. Document the new compatible string.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 17 Sep 2020 10:07:42 +0000 (12:07 +0200)]
dt-bindings: tegra: Add Tegra234 VDK compatible
The NVIDIA Tegra234 VDK is a simulation platform for the Orin SoC. It
supports a subset of the peripherals that will be available in the final
chip and serves as a bootstrapping platform.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 17 Sep 2020 10:07:41 +0000 (12:07 +0200)]
dt-bindings: misc: tegra186-misc: Add Tegra234 support
The MISC block found on Tegra234 is mostly similar to the one on
Tegra194 but supports slightly different register sets that make
it incompatible.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 17 Sep 2020 10:07:40 +0000 (12:07 +0200)]
dt-bindings: misc: tegra186-misc: Add missing compatible string
Add the missing compatible string for the Tegra194 MISC block.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 17 Sep 2020 10:07:39 +0000 (12:07 +0200)]
dt-bindings: misc: tegra-apbmisc: Add missing compatible strings
The compatible string for the Tegra210 APBMISC block was missing from
the bindings. Add it and while at it, rewrite the description of the
compatible string to make it clearer.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Geert Uytterhoeven [Thu, 17 Sep 2020 13:21:17 +0000 (15:21 +0200)]
arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channels
According to Technical Update TN-RCT-S0352A/E, MSIOF1 DMA can only be
used with SYS-DMAC0 on R-Car E3.
Fixes:
62c0056f1c3eb15d ("arm64: dts: renesas: r8a774c0: Add MSIOF nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200917132117.8515-3-geert+renesas@glider.be
Geert Uytterhoeven [Thu, 17 Sep 2020 13:21:16 +0000 (15:21 +0200)]
arm64: dts: renesas: r8a77990: Fix MSIOF1 DMA channels
According to Technical Update TN-RCT-S0352A/E, MSIOF1 DMA can only be
used with SYS-DMAC0 on R-Car E3.
Fixes:
8517042060b55a37 ("arm64: dts: renesas: r8a77990: Add DMA properties to MSIOF nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200917132117.8515-2-geert+renesas@glider.be
Jon Hunter [Wed, 16 Sep 2020 09:49:52 +0000 (10:49 +0100)]
arm64: tegra: Populate EEPROMs for Jetson Xavier NX
Populate the EEPROMs that are present on the Jetson Xavier NX developer
platform.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Jon Hunter [Wed, 16 Sep 2020 09:49:51 +0000 (10:49 +0100)]
arm64: tegra: Add label properties for EEPROMs
Populate the label property for the AT24 EEPROMs on the various Jetson
platforms. Note that the name 'module' is used to identify the EEPROM
on the processor module board and the name 'system' is used to identify
the EEPROM on the main base board (which is sometimes referred to as
the carrier board).
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Krzysztof Kozlowski [Mon, 7 Sep 2020 16:11:39 +0000 (18:11 +0200)]
ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Goni
"gpios" property is deprecated. Update the Goni DTS to fix
dtbs_checks warnings like:
i2c-pmic: 'sda-gpios' is a required property
i2c-pmic: 'scl-gpios' is a required property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200907161141.31034-24-krzk@kernel.org
Krzysztof Kozlowski [Mon, 7 Sep 2020 16:11:38 +0000 (18:11 +0200)]
ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Aquila
"gpios" property is deprecated. Update the Aquila DTS to fix
dtbs_checks warnings like:
i2c-pmic: 'sda-gpios' is a required property
i2c-pmic: 'scl-gpios' is a required property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200907161141.31034-23-krzk@kernel.org
Krzysztof Kozlowski [Mon, 7 Sep 2020 16:11:37 +0000 (18:11 +0200)]
ARM: dts: s5pv210: move fixed regulators under root node in Goni
The fixed regulators are kept under dedicated "regulators" node but this
causes multiple dtschema warnings:
regulators: $nodename:0: 'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
regulators: #size-cells:0:0: 0 is not one of [1, 2]
regulators: fixed-regulator@0:reg:0: [0] is too short
regulators: fixed-regulator@1:reg:0: [1] is too short
regulators: fixed-regulator@2:reg:0: [2] is too short
regulators: fixed-regulator@3:reg:0: [3] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200907161141.31034-22-krzk@kernel.org
Krzysztof Kozlowski [Mon, 7 Sep 2020 16:11:36 +0000 (18:11 +0200)]
ARM: dts: s5pv210: move fixed regulators under root node in Aquila
The fixed regulators are kept under dedicated "regulators" node but this
causes multiple dtschema warnings:
regulators: $nodename:0: 'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
regulators: #size-cells:0:0: 0 is not one of [1, 2]
regulators: fixed-regulator@0:reg:0: [0] is too short
regulators: fixed-regulator@1:reg:0: [1] is too short
regulators: fixed-regulator@2:reg:0: [2] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200907161141.31034-21-krzk@kernel.org
Krzysztof Kozlowski [Thu, 3 Sep 2020 19:14:38 +0000 (21:14 +0200)]
arm64: dts: exynos: Align OPP table name with dt-schema
Device tree nodes should have hyphens instead of underscores. This is
also expected by the bindings.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200903191438.12781-6-krzk@kernel.org
Krzysztof Kozlowski [Thu, 3 Sep 2020 19:14:37 +0000 (21:14 +0200)]
ARM: dts: exynos: Align OPP table name with dt-schema
Device tree nodes should have hyphens instead of underscores. This is
also expected by the bindings.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200903191438.12781-5-krzk@kernel.org
Lars Povlsen [Mon, 24 Aug 2020 20:30:10 +0000 (22:30 +0200)]
arm64: dts: sparx5: Add spi-nand devices
This patch add spi-nand DT nodes to the applicable Sparx5 boards.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20200824203010.2033-7-lars.povlsen@microchip.com
Lars Povlsen [Mon, 24 Aug 2020 20:30:09 +0000 (22:30 +0200)]
arm64: dts: sparx5: Add spi-nor support
This add spi-nor device nodes to the Sparx5 reference boards.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20200824203010.2033-6-lars.povlsen@microchip.com
Alexandre Belloni [Mon, 31 Aug 2020 17:11:29 +0000 (19:11 +0200)]
ARM: dts: at91: sama5d2: add missing flexcom spi node properties
SPI nodes require #address-cells and #size-cells add those properties in
the flexcom spi nodes.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20200831171129.3886857-8-alexandre.belloni@bootlin.com
Alexandre Belloni [Mon, 31 Aug 2020 17:11:28 +0000 (19:11 +0200)]
ARM: dts: at91: add unit-address to memory node
The memory node requires a unit-address, add it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20200831171129.3886857-7-alexandre.belloni@bootlin.com
Alexandre Belloni [Mon, 31 Aug 2020 17:11:26 +0000 (19:11 +0200)]
ARM: dts: at91: move mmc pinctrl-names property to board dts
Having the pinctrl-names property in the dtsi leads to dtbs_check warnings
when the board dts doesn't define pinctrl-0. Instead, move the property to
the board dts actually using the mmc node.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20200831171129.3886857-5-alexandre.belloni@bootlin.com
Lars Povlsen [Mon, 24 Aug 2020 20:30:07 +0000 (22:30 +0200)]
arm64: dts: sparx5: Add SPI controller and associated mmio-mux
This adds a SPI controller to the Microchip Sparx5 SoC, as well as the
mmio-mux that is required to select the right SPI interface for a
given SPI device.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20200824203010.2033-4-lars.povlsen@microchip.com
Lars Povlsen [Mon, 14 Sep 2020 08:27:04 +0000 (10:27 +0200)]
MAINTAINERS: Add git tree for Sparx5
This adds a git tree for maintaining the Sparx5 SoC from.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20200914083257.11080-1-lars.povlsen@microchip.com
Lars Povlsen [Tue, 28 Apr 2020 14:50:42 +0000 (16:50 +0200)]
arm64: dts: sparx5: Add hwmon temperature sensor
This adds a hwmon temperature node sensor to the Sparx5 SoC.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20200618135951.25441-3-lars.povlsen@microchip.com
Lars Povlsen [Tue, 28 Apr 2020 12:40:23 +0000 (14:40 +0200)]
arm64: dts: sparx5: Add Sparx5 eMMC support
This adds eMMC support to the applicable Sparx5 board configuration
files.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20200825081357.32354-4-lars.povlsen@microchip.com
Fabrizio Castro [Fri, 11 Sep 2020 12:12:59 +0000 (13:12 +0100)]
arm64: dts: renesas: r8a77990: Add DRIF support
Add the DRIF controller nodes for the r8a77990 (a.k.a. R-Car E3).
Please note that R-Car E3 has register BITCTR located at offset
0x80 (this register is not available on the r8a77960 and r8a77951,
whose support has already been upstreamed), and even though it is
not dealt with just yet within the driver, we have to keep that
into account with our device tree nodes.
Also, please note that while testing it has emerged that the
HW User Manual has the wrong DMA details for DRIF2 and DRIF3
on E3, as they are only allowed SYS-DMAC0 rather than SYS-DMAC1
and SYS-DMAC2. An errata addressing this issue will be available
soon.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Link: https://lore.kernel.org/r/20200911121259.5669-1-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Lad Prabhakar [Fri, 11 Sep 2020 08:36:15 +0000 (09:36 +0100)]
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add can0 support to camera DB
This patch enables CAN0 interface exposed through connector J4 on the
camera DB.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Link: https://lore.kernel.org/r/20200911083615.17377-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Lad Prabhakar [Fri, 11 Sep 2020 08:09:29 +0000 (09:09 +0100)]
ARM: dts: r8a7742: Add VSP support
Add VSP support to R8A7742 (RZ/G1H) SoC dtsi.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Link: https://lore.kernel.org/r/20200911080929.15058-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Geert Uytterhoeven [Wed, 19 Aug 2020 12:39:10 +0000 (14:39 +0200)]
arm64: dts: renesas: Drop superfluous pin configuration containers
As the pin configuration child nodes for EtherAVB on the Draak and Ebisu
boards contain only a single configuration, there is no need to wrap
them in additional grandchild containers. Hence remove the superfluous
level.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200819123910.19606-1-geert+renesas@glider.be
Andre Przywara [Mon, 7 Sep 2020 12:18:31 +0000 (13:18 +0100)]
ARM: dts: hisilicon: Fix SP805 clocks
The SP805 DT binding requires two clocks to be specified, but
Hisilicon platform DTs currently only specify one clock.
In practice, Linux would pick a clock named "apb_pclk" for the bus
clock, and the Linux and U-Boot SP805 driver would use the first clock
to derive the actual watchdog counter frequency.
Since currently both are the very same clock, we can just double the
clock reference, and add the correct clock-names, to match the binding.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Andre Przywara [Mon, 7 Sep 2020 12:18:26 +0000 (13:18 +0100)]
ARM: dts: hisilicon: Fix SP804 users
The SP804 binding only specifies one or three clocks, but does not allow
just two clocks.
The HiSi 3620 .dtsi specified two clocks for the two timers, plus gave
one "apb_pclk" clock-name to appease the primecell bus driver.
Extend the clocks by duplicating the first clock to the end of the clock
list, and add two dummy clock-names to make the primecell driver happy.
I don't know what the real APB clock for the IP is, but with the current
DT the first timer clock was used for that, so this change keeps the
current status.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Andre Przywara [Mon, 7 Sep 2020 12:18:29 +0000 (13:18 +0100)]
arm64: dts: hisilicon: Fix SP805 clocks
The SP805 DT binding requires two clocks to be specified, but
Hisilicon platform DTs currently only specify one clock.
In practice, Linux would pick a clock named "apb_pclk" for the bus
clock, and the Linux and U-Boot SP805 driver would use the first clock
to derive the actual watchdog counter frequency.
Since currently both are the very same clock, we can just double the
clock reference, and add the correct clock-names, to match the binding.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Adrian Schmutzler [Sun, 30 Aug 2020 20:05:51 +0000 (22:05 +0200)]
arm64: dts: hisilicon: replace status value "ok" by "okay"
While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Olof Johansson [Sun, 13 Sep 2020 18:36:10 +0000 (11:36 -0700)]
Merge tag 'arm-soc/for-5.10/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs changes for 5.10,
please pull the following:
- Adrian changes the status properties from "ok" to "okay"
- Andre fixes the SP805 watchdog nodes to have the correct clock names
and binding for the Northstar 2 platform
* tag 'arm-soc/for-5.10/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Fix SP805 clock-names
arm64: dts: broadcom: replace status value "ok" by "okay"
Link: https://lore.kernel.org/r/20200912032153.1216354-2-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 13 Sep 2020 18:34:24 +0000 (11:34 -0700)]
Merge tag 'arm-soc/for-5.10/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs changes for 5.10,
please pull the following:
- Christian adds support for the Cisco Meraki MR32 which is based on the
BCM53016 SoC, this requires specifying the PWM, second UART and third
PCIe controller in Device Tree before finally adding support for the
board.
- Adrian updates the status properties from "ok" to "okay".
- Andre fixes the SP805 watchdog nodes to have the correct clock names
and binding for both the Cygnus and Northstar Plus (NSP). He does the
same thing with the SP804 timer node which was missing an
"arm,primecell" compatible string.
- Maxime enables the BCM2711 (Raspberry Pi 4) display pipeline since all
DRM changes are ready.
* tag 'arm-soc/for-5.10/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: Fix SP804 node
ARM: dts: NSP: Fix SP805 clock-names
ARM: dts: Cygnus: Fix SP805 clocks
ARM: dts: NSP: replace status value "ok" by "okay"
ARM: BCM5301X: Add DT for Meraki MR32
ARM: dts: bcm2711: Enable the display pipeline
ARM: dts: BCM5301X: Specify pcie2 in the DT
ARM: dts: BCM5301X: Specify uart2 in the DT
ARM: dts: BCM5301X: Specify PWM in the DT
dt-bindings: ARM: add bindings for the Meraki MR32
Link: https://lore.kernel.org/r/20200912032153.1216354-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 13 Sep 2020 18:33:41 +0000 (11:33 -0700)]
Merge tag 'dt-schema-5.10' of https://git./linux/kernel/git/krzk/linux into arm/dt
Various minor cleanups for ARM DTS
Cleanup ARM DTS to remove dtschema validation errors.
* tag 'dt-schema-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: alpine: Align GIC nodename with dtschema
ARM: dts: zx: Align L2 cache-controller nodename with dtschema
ARM: dts: tango: Align L2 cache-controller nodename with dtschema
ARM: dts: spear: Align L2 cache-controller nodename with dtschema
ARM: dts: qcom: Align L2 cache-controller nodename with dtschema
ARM: dts: prima: Align L2 cache-controller nodename with dtschema
Link: https://lore.kernel.org/r/20200911155509.1495-2-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 13 Sep 2020 18:32:36 +0000 (11:32 -0700)]
Merge tag 'dt64-schema-5.10' of https://git./linux/kernel/git/krzk/linux into arm/dt
Various minor cleanups for arm64 Amazon DTS
Cleanup arm64 DTS to remove dtschema validation errors.
* tag 'dt64-schema-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: alpine: Fix GIC unit address
arm64: dts: alpine: Align GIC nodename with dtschema
Link: https://lore.kernel.org/r/20200911155509.1495-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 13 Sep 2020 18:31:24 +0000 (11:31 -0700)]
Merge tag 'aspeed-5.10-devicetree' of git://git./linux/kernel/git/joel/aspeed into arm/dt
ASPEED device tree updates for 5.10
- New machines
* Wistron Mowgli, an AST2500 BMC for a Power9 OpenPower server
* Facebook Wedge400, an AST2500 BMC system which we can assume is 4
times better than the existing Wedge100 top of rack network switch
- Add a new device, the IBM Operation Panel
- Fixes for Facebook's collection of BMCs
- eMMC and vuart fixes
* tag 'aspeed-5.10-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed: Add Mowgli BMC platform
ARM: dts: rainier: Disable internal pull-downs on eMMC pins
ARM: aspeed: g5: Do not set sirq polarity
ARM: dts: aspeed: rainier: Add IBM Operation Panel I2C device
ARM: dts: aspeed: tacoma: Add IBM Operation Panel I2C device
ARM: dts: aspeed: rainier: Enable XDMA engine
ARM: dts: aspeed: wedge40: Update UART4 pin settings
ARM: dts: aspeed: wedge40: Update FMC flash0 label
ARM: dts: aspeed: Add Facebook Wedge400 BMC
ARM: dts: aspeed: minipack: Update 64MB FMC flash layout
ARM: dts: aspeed: yamp: Set 32MB FMC flash layout
ARM: dts: aspeed: cmm: Set 32MB FMC flash layout
ARM: dts: aspeed: Remove flash layout from Facebook AST2500 Common dtsi
Link: https://lore.kernel.org/r/CACPK8XcDNBYAHzW6NYB4LFm3YbN63AprgW75ZqS+6uXn2b3kug@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 13 Sep 2020 18:27:04 +0000 (11:27 -0700)]
Merge tag 'juno-updates-5.10' of git://git./linux/kernel/git/sudeep.holla/linux into arm/dt
ARMv8 Juno/Vexpress/Fast Models updates for v5.10
A few device tree source fixes to make them fully SP804 timer and
SP805 watchdog binding compliant.
* tag 'juno-updates-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: arm: Fix SP805 clock-names
ARM: dts: arm: Fix SP805 clocks
ARM: dts: arm: Fix SP804 users
Link: https://lore.kernel.org/r/20200908135028.GA10106@bogus
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 13 Sep 2020 18:22:56 +0000 (11:22 -0700)]
Merge tag 'samsung-dt64-5.10' of https://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.10
Cleanup of Exynos DTS to fix as many dtschema warnings as possible.
This includes adding missing compatibles and using non-deprecated
properties. Changes should not have a visible impact.
* tag 'samsung-dt64-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add compatibles to sysreg nodes
arm64: dts: exynos: Replace deprecated "gpios" i2c-gpio property in Exynos5433
Link: https://lore.kernel.org/r/20200907150425.11077-2-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 13 Sep 2020 18:22:36 +0000 (11:22 -0700)]
Merge tag 'samsung-dt-5.10' of https://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.10
1. Add sound support to Galaxy S3/Midas family (Exynos4412).
2. Add sound support to Galaxy S/Aries family (S5Pv210).
3. Configure L2C-310 cache controller via DTS on Exynos4.
4. Big cleanup of Exynos DTS to fix as many dtschema warnings as
possible. This includes adding missing properties (thus e.g.
enabling S3C RTC clock), correcting existing nodes, renaming of
nodes and using non-deprecated properties or compatibles. Except
mentioned bring up of S3C RTC, this should not have visible
effect.
* tag 'samsung-dt-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (49 commits)
ARM: dts: exynos: Silence SATA PHY warning in Exynos5250
ARM: dts: exynos: Remove I2C9 samsung, i2c-slave-addr from Exynos5250 boards
ARM: dts: samsung: odroid-xu3: Move assigned-clock* properties to i2s0 node
ARM: dts: exynos: Use S2MPS11 clock in S3C RTC in SMDK5420
ARM: dts: exynos: Silence DP HPD pinctrl dtschema warning in Exynos5250 Spring
ARM: dts: exynos: Use S5M8767 clock in S3C RTC in Exynos5250 Spring
ARM: dts: exynos: Add max77686 clocks for S3C RTC in SMDK5250
ARM: dts: exynos: Override thermal by label in Exynos5250
ARM: dts: exynos: Correct whitespace and indentation issues in Exynos5
ARM: dts: exynos: Silence i2c-gpio dtschema warning in Exynos5250 Arndale
ARM: dts: exynos: Correct S3C RTC bindings in SMDK5410
ARM: dts: exynos: Remove unneeded address/size cells in Exynos5260 GIC
ARM: dts: exynos: Correct compatible for Exynos5260 GIC
ARM: dts: exynos: Correct compatible for Exynos5 GIC
ARM: dts: s5pv210: Enable audio on Aries boards
ARM: dts: exynos: Correct whitespace and indentation issues
ARM: dts: exynos: Correct S3C RTC bindings in Tiny4412
ARM: dts: exynos: Correct S3C RTC bindings in SMDK4412
ARM: dts: exynos: Add CPU cooling in Tiny4412
ARM: dts: exynos: Add CPU cooling in SMDK4412
...
Link: https://lore.kernel.org/r/20200907150425.11077-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 13 Sep 2020 18:21:22 +0000 (11:21 -0700)]
Merge tag 'renesas-arm-dt-for-v5.10-tag1' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.10
- Increase support for the RZ/G2H SoC on the HopeRun HiHope RZ/G2H
board, and its display panel expansion board,
- Increase support for the RZ/G1H SoC on the iWave RainboW SoM (G21M)
and Qseven board (G21D),
- SATA support for the HopeRun HiHope RZ/G2N board,
- PCIe endpoint support for the RZ/G2M, RZ/G2E, and RZ/G2H SoCs,
- Audio support for the R-Car M3-W+ SoC.
- Minor fixes and improvements.
* tag 'renesas-arm-dt-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (39 commits)
arm64: dts: renesas: Add HiHope RZ/G2H board with idk-1110wr display
arm64: dts: renesas: r8a774e1: Add cpuidle support for CA5x cores
arm64: dts: renesas: r8a774e1: Add FDP1 device nodes
ARM: dts: r8a7742-iwg21d-q7: Enable PCIe Controller
ARM: dts: r8a7742: Add IPMMU DT nodes
arm64: dts: renesas: r8a77961: Enable Sound / Audio-DMAC
arm64: dts: renesas: r8a774e1: Add PWM device nodes
ARM: dts: r8a7742-iwg21m: Add SPI NOR support
arm64: dts: renesas: r8a774e1-hihope-rzg2h: Enable HS400 mode
ARM: dts: r8a7742-iwg21m: Add RTC support
ARM: dts: r8a7742-iwg21m: Sort the nodes alphabetically
ARM: dts: r8a7742: Add CAN support
arm64: dts: renesas: r8a774c0: Add PCIe EP node
arm64: dts: renesas: r8a774b1: Add PCIe EP nodes
arm64: dts: renesas: r8a774a1: Add PCIe EP nodes
ARM: dts: r8a7742: Add QSPI support
arm64: dts: renesas: r8a774e1-hihope-rzg2h: Setup DU clocks
arm64: dts: renesas: r8a774e1: Add LVDS device node
arm64: dts: renesas: r8a774e1: Populate HDMI encoder node
arm64: dts: renesas: r8a774e1: Populate DU device node
...
Link: https://lore.kernel.org/r/20200904114819.30254-3-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 13 Sep 2020 18:18:37 +0000 (11:18 -0700)]
Merge tag 'omap-for-v5.10/dt-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.10
- Use a known good SGX clockrate for 4430, this is not needed as a fix
as the closed source SGX driver is out of tree
- Prepare DSI panels for upcoming changes to use generic driver code
- Add common support for MOXA UC-8100 series
- Add ocp label for l3 interconnect for board specific dts files to
reference
- Configure CPU thermal properties for omap3
* tag 'omap-for-v5.10/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap3: Add cpu trips and cooling map for omap34/36 families
ARM: dts: am33xx: add ocp label
ARM: dts: am335x: add common dtsi for MOXA UC-8100 series
ARM: dts: omap4-droid4: add panel orientation
ARM: dts: omap4-droid4: add panel compatible
ARM: dts: omap: add channel to DSI panels
ARM: dts: omap4: Fix sgx clock rate for 4430
ARM: dts: omap5: Fix DSI base address and clocks
ARM: dts: logicpd-som-lv-baseboard: Fix missing video
ARM: dts: logicpd-som-lv-baseboard: Fix broken audio
ARM: dts: logicpd-torpedo-baseboard: Fix broken audio
ARM: OMAP2+: Fix an IS_ERR() vs NULL check in _get_pwrdm()
Link: https://lore.kernel.org/r/pull-1599132307-761202@atomide.com-3
Signed-off-by: Olof Johansson <olof@lixom.net>
Matthias Schiffer [Mon, 7 Sep 2020 08:04:29 +0000 (10:04 +0200)]
ARM: dts: imx6qdl-tqma6: fix LM75 compatible string
Specify the National LM75 sensor including its vendor name, as mandated
by the binding docs.
Fixes:
cac849e9bbc8 ("ARM: dts: imx6qdl: add TQMa6{S,Q,QP} SoM")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Matthias Schiffer [Mon, 7 Sep 2020 08:04:28 +0000 (10:04 +0200)]
ARM: dts: imx6qdl-tqma6: remove obsolete fsl,spi-num-chipselects
This property is unneeded and not supported by the spi-imx driver.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Matthias Schiffer [Mon, 7 Sep 2020 08:04:27 +0000 (10:04 +0200)]
ARM: dts: imx6qdl-tqma6: fix indentation
The PMIC configuration is indented one level too deep.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Krzysztof Kozlowski [Mon, 29 Jun 2020 06:56:29 +0000 (08:56 +0200)]
ARM: dts: alpine: Align GIC nodename with dtschema
Fix dtschema validator warnings like:
gic@
fb001000: $nodename:0:
'gic@
fb001000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 26 Jun 2020 07:56:10 +0000 (09:56 +0200)]
ARM: dts: zx: Align L2 cache-controller nodename with dtschema
Fix dtschema validator warnings like:
l2-cache-controller@c00000: $nodename:0:
'l2-cache-controller@c00000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Krzysztof Kozlowski [Fri, 26 Jun 2020 07:54:52 +0000 (09:54 +0200)]
ARM: dts: tango: Align L2 cache-controller nodename with dtschema
Fix dtschema validator warnings like:
l2-cache-controller@
20100000: $nodename:0:
'l2-cache-controller@
20100000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Mans Rullgard <mans@mansr.com>
Krzysztof Kozlowski [Fri, 26 Jun 2020 07:53:57 +0000 (09:53 +0200)]
ARM: dts: spear: Align L2 cache-controller nodename with dtschema
Fix dtschema validator warnings like:
l2-cache: $nodename:0: 'l2-cache' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Krzysztof Kozlowski [Fri, 26 Jun 2020 07:52:58 +0000 (09:52 +0200)]
ARM: dts: qcom: Align L2 cache-controller nodename with dtschema
Fix dtschema validator warnings like:
l2-cache@2040000: $nodename:0:
'l2-cache@2040000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Fri, 26 Jun 2020 07:52:31 +0000 (09:52 +0200)]
ARM: dts: prima: Align L2 cache-controller nodename with dtschema
Fix dtschema validator warnings like:
l2-cache-controller@
80040000: $nodename:0:
'l2-cache-controller@
80040000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Barry Song <baohua@kernel.org>
Krzysztof Kozlowski [Mon, 29 Jun 2020 07:24:12 +0000 (09:24 +0200)]
arm64: dts: alpine: Fix GIC unit address
Node unit address should be the same as first address appearing in "reg"
property. Fixes DTC warning:
arch/arm64/boot/dts/al/alpine-v2.dtsi:116.38-126.5:
Warning (simple_bus_reg): /soc/interrupt-controller@
f0100000: simple-bus unit address format error, expected "
f0200000"
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Mon, 29 Jun 2020 07:02:23 +0000 (09:02 +0200)]
arm64: dts: alpine: Align GIC nodename with dtschema
Fix dtschema validator warnings like:
gic@
f0100000: $nodename:0:
'gic@
f0100000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof Kozlowski [Sun, 6 Sep 2020 14:21:46 +0000 (16:21 +0200)]
ARM: dts: exynos: move assigned-clock* properties to i2s0 node in Odroid XU4
The purpose of those assigned-clock-* properties is to configure clock for
the I2S device so move them to respective node. This silences the
dtschema warnings like:
'clocks' is a dependency of 'assigned-clocks'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200906142146.21266-3-krzk@kernel.org
Krzysztof Kozlowski [Sun, 6 Sep 2020 14:21:45 +0000 (16:21 +0200)]
ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid
Commit
68605101460e ("ARM: dts: exynos: Add support for audio over HDMI
for Odroid X/X2/U3") added assigned clocks under Clock Management Unit.
However the dtschema expects "clocks" property if "assigned-clocks" are
used. Add reference to input clock to silence the dtschema warnings:
arch/arm/boot/dts/exynos4412-odroidu3.dt.yaml: clock-controller@
10030000: 'clocks' is a dependency of 'assigned-clocks'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200906142146.21266-2-krzk@kernel.org
Krzysztof Kozlowski [Sun, 6 Sep 2020 14:21:44 +0000 (16:21 +0200)]
ARM: dts: exynos: add input clock to CMU in Exynos3250
Commit
52005dece527 ("ARM: dts: Add assigned clock parents to CMU node
for exynos3250") added assigned clocks under Clock Management Unit to
fix hangs when accessing ISP registers.
However the dtschema expects "clocks" property if "assigned-clocks" are
used. Add reference to input clock to silence the dtschema warnings:
arch/arm/boot/dts/exynos3250-artik5-eval.dt.yaml: clock-controller@
10030000: 'clocks' is a dependency of 'assigned-clocks'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200906142146.21266-1-krzk@kernel.org
Krzysztof Kozlowski [Thu, 3 Sep 2020 20:32:49 +0000 (22:32 +0200)]
arm64: dts: exynos: Remove undocumented i2s properties in Exynos5433
Few I2S device node properties were not documented and not used by any
of the drivers. Remove them to fix dtbs_check warning:
arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml: i2s@
14d60000:
Additional properties are not allowed ('samsung,supports-rstclr', 'samsung,supports-tdm',
'samsung,supports-6ch', 'samsung,supports-low-rfs' were unexpected)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200903203250.19830-3-krzk@kernel.org
Krzysztof Kozlowski [Mon, 7 Sep 2020 18:33:13 +0000 (20:33 +0200)]
ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416
The fixed clocks are kept under dedicated 'clocks' node but this causes
multiple dtschema warnings:
clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
clocks: #size-cells:0:0: 0 is not one of [1, 2]
clocks: xti@0:reg:0: [0] is too short
clocks: 'ranges' is a required property
xti@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200907183313.29234-12-krzk@kernel.org
Krzysztof Kozlowski [Mon, 7 Sep 2020 18:33:12 +0000 (20:33 +0200)]
ARM: dts: s3c24xx: add address to CPU node
The CPU nodes should be described as children of "cpus" bus node with
appropriate "reg" properties:
cpus: '#address-cells' is a required property
cpus: '#size-cells' is a required property
cpu: 'device_type' is a required property
cpu: 'reg' is a required property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200907183313.29234-11-krzk@kernel.org
Krzysztof Kozlowski [Mon, 7 Sep 2020 18:33:11 +0000 (20:33 +0200)]
ARM: dts: s3c24xx: align PWM/timer node name with dtschema
Although PWM is used on S3C24xx as clocksource/timer, the dtschema
expects the node to be named in certain format:
timer@
51000000: $nodename:0: 'timer@
51000000' does not match '^pwm(@.*|-[0-9a-f])*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200907183313.29234-10-krzk@kernel.org
Krzysztof Kozlowski [Mon, 7 Sep 2020 18:33:10 +0000 (20:33 +0200)]
ARM: dts: s3c24xx: override nodes by label
Using full paths to extend or override a device tree node is error
prone. If there was a typo error, a new node will be created instead of
extending the existing node. This will lead to run-time errors that
could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200907183313.29234-9-krzk@kernel.org
Krzysztof Kozlowski [Mon, 7 Sep 2020 18:33:09 +0000 (20:33 +0200)]
ARM: dts: s3c24xx: fix number of PWM cells
The PWM has only three cells, not four, as pointed out by dtschema:
timer@
51000000: #pwm-cells:0:0: 3 was expected
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200907183313.29234-8-krzk@kernel.org
Krzysztof Kozlowski [Mon, 7 Sep 2020 18:33:08 +0000 (20:33 +0200)]
ARM: dts: s3c6410: remove additional CPU compatible
Only the specific compatible (arm,arm1176jzf-s) is allowed by dtschema:
cpu@0: compatible: ['arm,arm1176jzf-s', 'arm,arm1176'] is too long
cpu@0: compatible: Additional items are not allowed ('arm,arm1176' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200907183313.29234-7-krzk@kernel.org
Krzysztof Kozlowski [Mon, 7 Sep 2020 18:33:07 +0000 (20:33 +0200)]
ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410
The SROM controller is modeled with a bus so align the device node name
with dtschema to fix warning:
srom-cs1@
18000000: $nodename:0: 'srom-cs1@
18000000'
does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200907183313.29234-6-krzk@kernel.org
Krzysztof Kozlowski [Mon, 7 Sep 2020 18:33:06 +0000 (20:33 +0200)]
ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410
The SROM controller is modeled with a bus so align the device node name
with dtschema to fix warning:
srom-cs1@
18000000: $nodename:0: 'srom-cs1@
18000000'
does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200907183313.29234-5-krzk@kernel.org
Krzysztof Kozlowski [Mon, 7 Sep 2020 18:33:05 +0000 (20:33 +0200)]
ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410
The fixed clocks are kept under dedicated 'clocks' node but this causes
multiple dtschema warnings:
clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
clocks: #size-cells:0:0: 0 is not one of [1, 2]
clocks: oscillator@0:reg:0: [0] is too short
clocks: oscillator@1:reg:0: [1] is too short
clocks: 'ranges' is a required property
oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200907183313.29234-4-krzk@kernel.org