btrfs: add info when mount fails due to stale replace target

commit f2c3bec215694fb8bc0ef5010f2a758d1906fc2d upstream.

If the replace target device reappears after the suspended replace is
cancelled, it blocks the mount operation as it can't find the matching
replace-item in the metadata. As shown below,

   BTRFS error (device sda5): replace devid present without an active replace item

To overcome this situation, the user can run the command

   btrfs device scan --forget <replace target device>

and try the mount command again. And also, to avoid repeating the issue,
superblock on the devid=0 must be wiped.

   wipefs -a device-path-to-devid=0.

This patch adds some info when this situation occurs.

Reported-by: Samuel Greiner <samuel@balkonien.org>
Link: https://lore.kernel.org/linux-btrfs/b4f62b10-b295-26ea-71f9-9a5c9299d42c@balkonien.org/T/
CC: stable@vger.kernel.org # 5.0+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: replace: drop assert for suspended replace

commit 59a3991984dbc1fc47e5651a265c5200bd85464e upstream.

If the filesystem mounts with the replace-operation in a suspended state
and try to cancel the suspended replace-operation, we hit the assert. The
assert came from the commit fe97e2e173af ("btrfs: dev-replace: replace's
scrub must not be running in suspended state") that was actually not
required. So just remove it.

 $ mount /dev/sda5 /btrfs

    BTRFS info (device sda5): cannot continue dev_replace, tgtdev is missing
    BTRFS info (device sda5): you may cancel the operation after 'mount -o degraded'

 $ mount -o degraded /dev/sda5 /btrfs <-- success.

 $ btrfs replace cancel /btrfs

    kernel: assertion failed: ret != -ENOTCONN, in fs/btrfs/dev-replace.c:1131
    kernel: ------------[ cut here ]------------
    kernel: kernel BUG at fs/btrfs/ctree.h:3750!

After the patch:

 $ btrfs replace cancel /btrfs

    BTRFS info (device sda5): suspended dev_replace from /dev/sda5 (devid 1) to <missing disk> canceled

Fixes: fe97e2e173af ("btrfs: dev-replace: replace's scrub must not be running in suspended state")
CC: stable@vger.kernel.org # 5.0+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix silent failure when deleting root reference

commit 47bf225a8d2cccb15f7e8d4a1ed9b757dd86afd7 upstream.

At btrfs_del_root_ref(), if btrfs_search_slot() returns an error, we end
up returning from the function with a value of 0 (success). This happens
because the function returns the value stored in the variable 'err',
which is 0, while the error value we got from btrfs_search_slot() is
stored in the 'ret' variable.

So fix it by setting 'err' with the error value.

Fixes: 8289ed9f93bef2 ("btrfs: replace the BUG_ON in btrfs_del_root_ref with proper error handling")
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: work around sporadic tx issue on link-up

[ Upstream commit a3a57bf07de23fe1ff779e0fdf710aa581c3ff73 ]

This is a follow-up to the discussion in [0]. It seems to me that
at least the IP version used on Amlogic SoC's sometimes has a problem
if register MAC_CTRL_REG is written whilst the chip is still processing
a previous write. But that's just a guess.
Adding a delay between two writes to this register helps, but we can
also simply omit the offending second write. This patch uses the second
approach and is based on a suggestion from Qi Duan.
Benefit of this approach is that we can save few register writes, also
on not affected chip versions.

[0] https://www.spinics.net/lists/netdev/msg831526.html

Fixes: bfab27a146ed ("stmmac: add the experimental PCI support")
Suggested-by: Qi Duan <qi.duan@amlogic.com>
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/e99857ce-bd90-5093-ca8c-8cd480b5a0a2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: VF initial random MAC address if no assigned mac

[ Upstream commit 19058be7c48ceb3e60fa3948e24da1059bd68ee4 ]

Assign a random mac address to the VF interface station
address if it boots with a zero mac address in order to match
similar behavior seen in other VF drivers.  Handle the errors
where the older firmware does not allow the VF to set its own
station address.

Newer firmware will allow the VF to set the station mac address
if it hasn't already been set administratively through the PF.
Setting it will also be allowed if the VF has trust.

Fixes: fbb39807e9ae ("ionic: support sr-iov operations")
Signed-off-by: R Mohamed Shah <mohamed@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: fix up issues with handling EAGAIN on FW cmds

[ Upstream commit 0fc4dd452d6c14828eed6369155c75c0ac15bab3 ]

In looping on FW update tests we occasionally see the
FW_ACTIVATE_STATUS command fail while it is in its EAGAIN loop
waiting for the FW activate step to finsh inside the FW.  The
firmware is complaining that the done bit is set when a new
dev_cmd is going to be processed.

Doing a clean on the cmd registers and doorbell before exiting
the wait-for-done and cleaning the done bit before the sleep
prevents this from occurring.

Fixes: fbfb8031533c ("ionic: Add hardware init and device commands")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: clear broken state on generation change

[ Upstream commit 9cb9dadb8f45c67e4310e002c2f221b70312b293 ]

There is a case found in heavy testing where a link flap happens just
before a firmware Recovery event and the driver gets stuck in the
BROKEN state.  This comes from the driver getting interrupted by a FW
generation change when coming back up from the link flap, and the call
to ionic_start_queues() in ionic_link_status_check() fails.  This can be
addressed by having the fw_up code clear the BROKEN bit if seen, rather
than waiting for a user to manually force the interface down and then
back up.

Fixes: 9e8eaf8427b6 ("ionic: stop watchdog when in broken state")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: widen queue_lock use around lif init and deinit

[ Upstream commit 2624d95972dbebe5f226361bfc51a83bdb68c93b ]

Widen the coverage of the queue_lock to be sure the lif init
and lif deinit actions are protected.  This addresses a hang
seen when a Tx Timeout action was attempted at the same time
as a FW Reset was started.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix locking in rxrpc's sendmsg

[ Upstream commit b0f571ecd7943423c25947439045f0d352ca3dbf ]

Fix three bugs in the rxrpc's sendmsg implementation:

 (1) rxrpc_new_client_call() should release the socket lock when returning
     an error from rxrpc_get_call_slot().

 (2) rxrpc_wait_for_tx_window_intr() will return without the call mutex
     held in the event that we're interrupted by a signal whilst waiting
     for tx space on the socket or relocking the call mutex afterwards.

     Fix this by: (a) moving the unlock/lock of the call mutex up to
     rxrpc_send_data() such that the lock is not held around all of
     rxrpc_wait_for_tx_window*() and (b) indicating to higher callers
     whether we're return with the lock dropped.  Note that this means
     recvmsg() will not block on this call whilst we're waiting.

 (3) After dropping and regaining the call mutex, rxrpc_send_data() needs
     to go and recheck the state of the tx_pending buffer and the
     tx_total_len check in case we raced with another sendmsg() on the same
     call.

Thinking on this some more, it might make sense to have different locks for
sendmsg() and recvmsg().  There's probably no need to make recvmsg() wait
for sendmsg().  It does mean that recvmsg() can return MSG_EOR indicating
that a call is dead before a sendmsg() to that call returns - but that can
currently happen anyway.

Without fix (2), something like the following can be induced:

WARNING: bad unlock balance detected!
5.16.0-rc6-syzkaller #0 Not tainted
-------------------------------------
syz-executor011/3597 is trying to release lock (&call->user_mutex) at:
[<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748
but there are no more locks to release!

other info that might help us debug this:
no locks held by syz-executor011/3597.
...
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline]
 __lock_release kernel/locking/lockdep.c:5306 [inline]
 lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657
 __mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900
 rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748
 rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

[Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this]

Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Reported-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com
cc: Hawkins Jiawei <yin31149@gmail.com>
cc: Khalid Masum <khalid.masum.92@gmail.com>
cc: Dan Carpenter <dan.carpenter@oracle.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/166135894583.600315.7170979436768124075.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix incorrect address type for IPv6 flow rules

[ Upstream commit bcf3a156429306070afbfda5544f2b492d25e75b ]

It was not possible to create 1-tuple flow director
rule for IPv6 flow type. It was caused by incorrectly
checking for source IP address when validating user provided
destination IP address.

Fix this by changing ip6src to correct ip6dst address
in destination IP address validation for IPv6 flow type.

Fixes: efca91e89b67 ("i40e: Add flow director support for IPv6")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter

[ Upstream commit 25d7a5f5a6bb15a2dae0a3f39ea5dda215024726 ]

The ixgbe_ptp_start_cyclecounter is intended to be called whenever the
cyclecounter parameters need to be changed.

Since commit a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x
devices"), this function has cleared the SYSTIME registers and reset the
TSAUXC DISABLE_SYSTIME bit.

While these need to be cleared during ixgbe_ptp_reset, it is wrong to clear
them during ixgbe_ptp_start_cyclecounter. This function may be called
during both reset and link status change. When link changes, the SYSTIME
counter is still operating normally, but the cyclecounter should be updated
to account for the possibly changed parameters.

Clearing SYSTIME when link changes causes the timecounter to jump because
the cycle counter now reads zero.

Extract the SYSTIME initialization out to a new function and call this
during ixgbe_ptp_reset. This prevents the timecounter adjustment and avoids
an unnecessary reset of the current time.

This also restores the original SYSTIME clearing that occurred during
ixgbe_ptp_reset before the commit above.

Reported-by: Steve Payne <spayne@aurora.tech>
Reported-by: Ilya Evenbach <ievenbach@aurora.tech>
Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Fix a data-race around sysctl_somaxconn.

[ Upstream commit 3c9ba81d72047f2e81bb535d42856517b613aba7 ]

While reading sysctl_somaxconn, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Fix data-races around sysctl_devconf_inherit_init_net.

[ Upstream commit a5612ca10d1aa05624ebe72633e0c8c792970833 ]

While reading sysctl_devconf_inherit_init_net, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: 856c395cfa63 ("net: introduce a knob to control whether to inherit devconf config")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Fix data-races around sysctl_fb_tunnels_only_for_init_net.

[ Upstream commit af67508ea6cbf0e4ea27f8120056fa2efce127dd ]

While reading sysctl_fb_tunnels_only_for_init_net, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: 79134e6ce2c9 ("net: do not create fallback tunnels for non-default namespaces")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Fix a data-race around netdev_budget_usecs.

[ Upstream commit fa45d484c52c73f79db2c23b0cdfc6c6455093ad ]

While reading netdev_budget_usecs, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 7acf8a1e8a28 ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Fix data-races around sysctl_max_skb_frags.

[ Upstream commit 657b991afb89d25fe6c4783b1b75a8ad4563670d ]

While reading sysctl_max_skb_frags, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 5f74f82ea34c ("net:Add sysctl_max_skb_frags")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: stop relying on tcp_tx_skb_cache

[ Upstream commit f70cad1085d1e01d3ec73c1078405f906237feee ]

We want to revert the skb TX cache, but MPTCP is currently
using it unconditionally.

Rework the MPTCP tx code, so that tcp_tx_skb_cache is not
needed anymore: do the whole coalescing check, skb allocation
skb initialization/update inside mptcp_sendmsg_frag(), quite
alike the current TCP code.

Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: expose the tcp_mark_push() and tcp_skb_entail() helpers

[ Upstream commit 04d8825c30b718781197c8f07b1915a11bfb8685 ]

the tcp_skb_entail() helper is actually skb_entail(), renamed
to provide proper scope.

    The two helper will be used by the next patch.

RFC -> v1:
 - rename skb_entail to tcp_skb_entail (Eric)

Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Fix a data-race around netdev_budget.

[ Upstream commit 2e0c42374ee32e72948559d2ae2f7ba3dc6b977c ]

While reading netdev_budget, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 51b0bdedb8e7 ("[NET]: Separate two usages of netdev_max_backlog.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Fix a data-race around sysctl_net_busy_read.

[ Upstream commit e59ef36f0795696ab229569c153936bfd068d21c ]

While reading sysctl_net_busy_read, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 2d48d67fa8cd ("net: poll/select low latency socket support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Fix a data-race around sysctl_net_busy_poll.

[ Upstream commit c42b7cddea47503411bfb5f2f93a4154aaffa2d9 ]

While reading sysctl_net_busy_poll, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 060212928670 ("net: add low latency socket poll")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Fix a data-race around sysctl_tstamp_allow_data.

[ Upstream commit d2154b0afa73c0159b2856f875c6b4fe7cf6a95e ]

While reading sysctl_tstamp_allow_data, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: b245be1f4db1 ("net-timestamp: no-payload only sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Fix data-races around sysctl_optmem_max.

[ Upstream commit 7de6d09f51917c829af2b835aba8bb5040f8e86a ]

While reading sysctl_optmem_max, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ratelimit: Fix data-races in ___ratelimit().

[ Upstream commit 6bae8ceb90ba76cdba39496db936164fa672b9be ]

While reading rs->interval and rs->burst, they can be changed
concurrently via sysctl (e.g. net_ratelimit_state).  Thus, we
need to add READ_ONCE() to their readers.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Fix data-races around netdev_tstamp_prequeue.

[ Upstream commit 61adf447e38664447526698872e21c04623afb8e ]

While reading netdev_tstamp_prequeue, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 3b098e2d7c69 ("net: Consistent skb timestamping")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Fix data-races around netdev_max_backlog.

[ Upstream commit 5dcd08cd19912892586c6082d56718333e2d19db ]

While reading netdev_max_backlog, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

While at it, we remove the unnecessary spaces in the doc.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Fix data-races around weight_p and dev_weight_[rt]x_bias.

[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]

While reading weight_p, it can be changed concurrently.  Thus, we need
to add READ_ONCE() to its reader.

Also, dev_[rt]x_weight can be read/written at the same time.  So, we
need to use READ_ONCE() and WRITE_ONCE() for its access.  Moreover, to
use the same weight_p while changing dev_[rt]x_weight, we add a mutex
in proc_do_dev_weight().

Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Fix data-races around sysctl_[rw]mem_(max|default).

[ Upstream commit 1227c1771dd2ad44318aa3ab9e3a293b3f34ff2a ]

While reading sysctl_[rw]mem_(max|default), they can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: flowtable: fix stuck flows on cleanup due to pending work

[ Upstream commit 9afb4b27349a499483ae0134282cefd0c90f480f ]

To clear the flow table on flow table free, the following sequence
normally happens in order:

  1) gc_step work is stopped to disable any further stats/del requests.
  2) All flow table entries are set to teardown state.
  3) Run gc_step which will queue HW del work for each flow table entry.
  4) Waiting for the above del work to finish (flush).
  5) Run gc_step again, deleting all entries from the flow table.
  6) Flow table is freed.

But if a flow table entry already has pending HW stats or HW add work
step 3 will not queue HW del work (it will be skipped), step 4 will wait
for the pending add/stats to finish, and step 5 will queue HW del work
which might execute after freeing of the flow table.

To fix the above, this patch flushes the pending work, then it sets the
teardown flag to all flows in the flowtable and it forces a garbage
collector run to queue work to remove the flows from hardware, then it
flushes this new pending work and (finally) it forces another garbage
collector run to remove the entry from the software flowtable.

Stack trace:
[47773.882335] BUG: KASAN: use-after-free in down_read+0x99/0x460
[47773.883634] Write of size 8 at addr ffff888103b45aa8 by task kworker/u20:6/543704
[47773.885634] CPU: 3 PID: 543704 Comm: kworker/u20:6 Not tainted 5.12.0-rc7+ #2
[47773.886745] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
[47773.888438] Workqueue: nf_ft_offload_del flow_offload_work_handler [nf_flow_table]
[47773.889727] Call Trace:
[47773.890214]  dump_stack+0xbb/0x107
[47773.890818]  print_address_description.constprop.0+0x18/0x140
[47773.892990]  kasan_report.cold+0x7c/0xd8
[47773.894459]  kasan_check_range+0x145/0x1a0
[47773.895174]  down_read+0x99/0x460
[47773.899706]  nf_flow_offload_tuple+0x24f/0x3c0 [nf_flow_table]
[47773.907137]  flow_offload_work_handler+0x72d/0xbe0 [nf_flow_table]
[47773.913372]  process_one_work+0x8ac/0x14e0
[47773.921325]
[47773.921325] Allocated by task 592159:
[47773.922031]  kasan_save_stack+0x1b/0x40
[47773.922730]  __kasan_kmalloc+0x7a/0x90
[47773.923411]  tcf_ct_flow_table_get+0x3cb/0x1230 [act_ct]
[47773.924363]  tcf_ct_init+0x71c/0x1156 [act_ct]
[47773.925207]  tcf_action_init_1+0x45b/0x700
[47773.925987]  tcf_action_init+0x453/0x6b0
[47773.926692]  tcf_exts_validate+0x3d0/0x600
[47773.927419]  fl_change+0x757/0x4a51 [cls_flower]
[47773.928227]  tc_new_tfilter+0x89a/0x2070
[47773.936652]
[47773.936652] Freed by task 543704:
[47773.937303]  kasan_save_stack+0x1b/0x40
[47773.938039]  kasan_set_track+0x1c/0x30
[47773.938731]  kasan_set_free_info+0x20/0x30
[47773.939467]  __kasan_slab_free+0xe7/0x120
[47773.940194]  slab_free_freelist_hook+0x86/0x190
[47773.941038]  kfree+0xce/0x3a0
[47773.941644]  tcf_ct_flow_table_cleanup_work

Original patch description and stack trace by Paul Blakey.

Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Reported-by: Paul Blakey <paulb@nvidia.com>
Tested-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: flowtable: add function to invoke garbage collection immediately

[ Upstream commit 759eebbcfafcefa23b59e912396306543764bd3c ]

Expose nf_flow_table_gc_run() to force a garbage collector run from the
offload infrastructure.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: disallow binding to already bound chain

[ Upstream commit e02f0d3970404bfea385b6edb86f2d936db0ea2b ]

Update nft_data_init() to report EINVAL if chain is already bound.

Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: disallow jump to implicit chain from set element

[ Upstream commit f323ef3a0d49e147365284bc1f02212e617b7f09 ]

Extend struct nft_data_desc to add a flag field that specifies
nft_data_init() is being called for set element data.

Use it to disallow jump to implicit chain from set element, only jump
to chain via immediate expression is allowed.

Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: upfront validation of data via nft_data_init()

[ Upstream commit 341b6941608762d8235f3fd1e45e4d7114ed8c2c ]

Instead of parsing the data and then validate that type and length are
correct, pass a description of the expected data so it can be validated
upfront before parsing it to bail out earlier.

This patch adds a new .size field to specify the maximum size of the
data area. The .len field is optional and it is used as an input/output
field, it provides the specific length of the expected data in the input
path. If then .len field is not specified, then obtained length from the
netlink attribute is stored. This is required by cmp, bitwise, range and
immediate, which provide no netlink attribute that describes the data
length. The immediate expression uses the destination register type to
infer the expected data type.

Relying on opencoded validation of the expected data might lead to
subtle bugs as described in 7e6bc1f6cabc ("netfilter: nf_tables:
stricter validation of element data").

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: bitwise: improve error goto labels

[ Upstream commit 00bd435208e5201eb935d273052930bd3b272b6f ]

Replace two labels (`err1` and `err2`) with more informative ones.

Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_cmp: optimize comparison for 16-bytes

[ Upstream commit 23f68d462984bfda47c7bf663dca347e8e3df549 ]

Allow up to 16-byte comparisons with a new cmp fast version. Use two
64-bit words and calculate the mask representing the bits to be
compared. Make sure the comparison is 64-bit aligned and avoid
out-of-bound memory access on registers.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: consolidate rule verdict trace call

[ Upstream commit 4765473fefd4403b5eeca371637065b561522c50 ]

Add function to consolidate verdict tracing.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_tunnel: restrict it to netdev family

[ Upstream commit 01e4092d53bc4fe122a6e4b6d664adbd57528ca3 ]

Only allow to use this expression from NFPROTO_NETDEV family.

Fixes: af308b94a2a4 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_osf: restrict osf to ipv4, ipv6 and inet families

[ Upstream commit 5f3b7aae14a706d0d7da9f9e39def52ff5fc3d39 ]

As it was originally intended, restrict extension to supported families.

Fixes: b96af92d6eaf ("netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: do not leave chain stats enabled on error

[ Upstream commit 43eb8949cfdffa764b92bc6c54b87cbe5b0003fe ]

Error might occur later in the nf_tables_addchain() codepath, enable
static key only after transaction has been created.

Fixes: 9f08ea848117 ("netfilter: nf_tables: keep chain counters away from hot path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_payload: do not truncate csum_offset and csum_type

[ Upstream commit 7044ab281febae9e2fa9b0b247693d6026166293 ]

Instead report ERANGE if csum_offset is too long, and EOPNOTSUPP if type
is not support.

Fixes: 7ec3f7b47b8d ("netfilter: nft_payload: add packet mangling support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_payload: report ERANGE for too long offset and length

[ Upstream commit 94254f990c07e9ddf1634e0b727fab821c3b5bf9 ]

Instead of offset and length are truncation to u8, report ERANGE.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: make table handle allocation per-netns friendly

[ Upstream commit ab482c6b66a4a8c0a8c0b0f577a785cf9ff1c2e2 ]

mutex is per-netns, move table_netns to the pernet area.

*read-write* to 0xffffffff883a01e8 of 8 bytes by task 6542 on cpu 0:
 nf_tables_newtable+0x6dc/0xc00 net/netfilter/nf_tables_api.c:1221
 nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline]
 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline]
 nfnetlink_rcv+0xa6a/0x13a0 net/netfilter/nfnetlink.c:652
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x652/0x730 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x643/0x740 net/netlink/af_netlink.c:1921

Fixes: f102d66b335a ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: disallow updates of implicit chain

[ Upstream commit 5dc52d83baac30decf5f3b371d5eb41dfa1d1412 ]

Updates on existing implicit chain make no sense, disallow this.

Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: fix NQ resource accounting during vf creation on 57500 chips

[ Upstream commit 09a89cc59ad67794a11e1d3dd13c5b3172adcc51 ]

There are 2 issues:

1. We should decrement hw_resc->max_nqs instead of hw_resc->max_irqs
   with the number of NQs assigned to the VFs.  The IRQs are fixed
   on each function and cannot be re-assigned.  Only the NQs are being
   assigned to the VFs.

2. vf_msix is the total number of NQs to be assigned to the VFs.  So
   we should decrement vf_msix from hw_resc->max_nqs.

Fixes: b16b68918674 ("bnxt_en: Add SR-IOV support for 57500 chips.")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ebtables: reject blobs that don't provide all entry points

[ Upstream commit 7997eff82828304b780dc0a39707e1946d6f1ebf ]

Harshit Mogalapalli says:
 In ebt_do_table() function dereferencing 'private->hook_entry[hook]'
 can lead to NULL pointer dereference. [..] Kernel panic:

general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[..]
RIP: 0010:ebt_do_table+0x1dc/0x1ce0
Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 5c 16 00 00 48 b8 00 00 00 00 00 fc ff df 49 8b 6c df 08 48 8d 7d 2c 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 88
[..]
Call Trace:
 nf_hook_slow+0xb1/0x170
 __br_forward+0x289/0x730
 maybe_deliver+0x24b/0x380
 br_flood+0xc6/0x390
 br_dev_xmit+0xa2e/0x12c0

For some reason ebtables rejects blobs that provide entry points that are
not supported by the table, but what it should instead reject is the
opposite: blobs that DO NOT provide an entry point supported by the table.

t->valid_hooks is the bitmask of hooks (input, forward ...) that will see
packets.  Providing an entry point that is not support is harmless
(never called/used), but the inverse isn't: it results in a crash
because the ebtables traverser doesn't expect a NULL blob for a location
its receiving packets for.

Instead of fixing all the individual checks, do what iptables is doing and
reject all blobs that differ from the expected hooks.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipvtap - add __init/__exit annotations to module init/exit funcs

[ Upstream commit 4b2e3a17e9f279325712b79fb01d1493f9e3e005 ]

Looks to have been left out in an oversight.

Cc: Mahesh Bandewar <maheshb@google.com>
Cc: Sainath Grandhi <sainath.grandhi@intel.com>
Fixes: 235a9d89da97 ('ipvtap: IP-VLAN based tap driver')
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20220821130808.12143-1-zenczykowski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: 802.3ad: fix no transmission of LACPDUs

[ Upstream commit d745b5062ad2b5da90a5e728d7ca884fc07315fd ]

This is caused by the global variable ad_ticks_per_sec being zero as
demonstrated by the reproducer script discussed below. This causes
all timer values in __ad_timer_to_ticks to be zero, resulting
in the periodic timer to never fire.

To reproduce:
Run the script in
`tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh` which
puts bonding into a state where it never transmits LACPDUs.

line 44: ip link add fbond type bond mode 4 miimon 200 \
            xmit_hash_policy 1 ad_actor_sys_prio 65535 lacp_rate fast
setting bond param: ad_actor_sys_prio
given:
    params.ad_actor_system = 0
call stack:
    bond_option_ad_actor_sys_prio()
    -> bond_3ad_update_ad_actor_settings()
       -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio
       -> ad.system.sys_mac_addr = bond->dev->dev_addr; because
            params.ad_actor_system == 0
results:
     ad.system.sys_mac_addr = bond->dev->dev_addr

line 48: ip link set fbond address 52:54:00:3B:7C:A6
setting bond MAC addr
call stack:
    bond->dev->dev_addr = new_mac

line 52: ip link set fbond type bond ad_actor_sys_prio 65535
setting bond param: ad_actor_sys_prio
given:
    params.ad_actor_system = 0
call stack:
    bond_option_ad_actor_sys_prio()
    -> bond_3ad_update_ad_actor_settings()
       -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio
       -> ad.system.sys_mac_addr = bond->dev->dev_addr; because
            params.ad_actor_system == 0
results:
     ad.system.sys_mac_addr = bond->dev->dev_addr

line 60: ip link set veth1-bond down master fbond
given:
    params.ad_actor_system = 0
    params.mode = BOND_MODE_8023AD
    ad.system.sys_mac_addr == bond->dev->dev_addr
call stack:
    bond_enslave
    -> bond_3ad_initialize(); because first slave
       -> if ad.system.sys_mac_addr != bond->dev->dev_addr
          return
results:
     Nothing is run in bond_3ad_initialize() because dev_addr equals
     sys_mac_addr leaving the global ad_ticks_per_sec zero as it is
     never initialized anywhere else.

The if check around the contents of bond_3ad_initialize() is no longer
needed due to commit 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings
changes immediately") which sets ad.system.sys_mac_addr if any one of
the bonding parameters whos set function calls
bond_3ad_update_ad_actor_settings(). This is because if
ad.system.sys_mac_addr is zero it will be set to the current bond mac
address, this causes the if check to never be true.

Fixes: 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings changes immediately")
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: moxa: get rid of asymmetry in DMA mapping/unmapping

[ Upstream commit 0ee7828dfc56e97d71e51e6374dc7b4eb2b6e081 ]

Since priv->rx_mapping[i] is maped in moxart_mac_open(), we
should unmap it from moxart_mac_stop(). Fixes 2 warnings.

1. During error unwinding in moxart_mac_probe(): "goto init_fail;",
then moxart_mac_free_memory() calls dma_unmap_single() with
priv->rx_mapping[i] pointers zeroed.

WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:963 check_unmap+0x704/0x980
DMA-API: moxart-ethernet 92000000.mac: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=1600 bytes]
CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0+ #60
Hardware name: Generic DT based system
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x34/0x44
 dump_stack_lvl from __warn+0xbc/0x1f0
 __warn from warn_slowpath_fmt+0x94/0xc8
 warn_slowpath_fmt from check_unmap+0x704/0x980
 check_unmap from debug_dma_unmap_page+0x8c/0x9c
 debug_dma_unmap_page from moxart_mac_free_memory+0x3c/0xa8
 moxart_mac_free_memory from moxart_mac_probe+0x190/0x218
 moxart_mac_probe from platform_probe+0x48/0x88
 platform_probe from really_probe+0xc0/0x2e4

2. After commands:
 ip link set dev eth0 down
 ip link set dev eth0 up

WARNING: CPU: 0 PID: 55 at kernel/dma/debug.c:570 add_dma_entry+0x204/0x2ec
DMA-API: moxart-ethernet 92000000.mac: cacheline tracking EEXIST, overlapping mappings aren't supported
CPU: 0 PID: 55 Comm: ip Not tainted 5.19.0+ #57
Hardware name: Generic DT based system
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x34/0x44
 dump_stack_lvl from __warn+0xbc/0x1f0
 __warn from warn_slowpath_fmt+0x94/0xc8
 warn_slowpath_fmt from add_dma_entry+0x204/0x2ec
 add_dma_entry from dma_map_page_attrs+0x110/0x328
 dma_map_page_attrs from moxart_mac_open+0x134/0x320
 moxart_mac_open from __dev_open+0x11c/0x1ec
 __dev_open from __dev_change_flags+0x194/0x22c
 __dev_change_flags from dev_change_flags+0x14/0x44
 dev_change_flags from devinet_ioctl+0x6d4/0x93c
 devinet_ioctl from inet_ioctl+0x1ac/0x25c

v1 -> v2:
Extraneous change removed.

Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220819110519.1230877-1-saproj@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: Don't WARN for PHY_READY state in mdio_bus_phy_resume()

[ Upstream commit 6dbe852c379ff032a70a6b13a91914918c82cb07 ]

For some MAC drivers, they set the mac_managed_pm to true in its
->ndo_open() callback. So before the mac_managed_pm is set to true,
we still want to leverage the mdio_bus_phy_suspend()/resume() for
the phy device suspend and resume. In this case, the phy device is
in PHY_READY, and we shouldn't warn about this. It also seems that
the check of mac_managed_pm in WARN_ON is redundant since we already
check this in the entry of mdio_bus_phy_resume(), so drop it.

Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220819082451.1992102-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipa: don't assume SMEM is page-aligned

[ Upstream commit b8d4380365c515d8e0351f2f46d371738dd19be1 ]

In ipa_smem_init(), a Qualcomm SMEM region is allocated (if needed)
and then its virtual address is fetched using qcom_smem_get().  The
physical address associated with that region is also fetched.

The physical address is adjusted so that it is page-aligned, and an
attempt is made to update the size of the region to compensate for
any non-zero adjustment.

But that adjustment isn't done properly.  The physical address is
aligned twice, and as a result the size is never actually adjusted.

Fix this by *not* aligning the "addr" local variable, and instead
making the "phys" local variable be the adjusted "addr" value.

Fixes: a0036bb413d5b ("net: ipa: define SMEM memory region for IPA")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220818134206.567618-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix wrong tc flag used when set hw-tc-offload off

[ Upstream commit 550f96432e6f6770efdaee0e65239d61431062a1 ]

The cited commit reintroduced the ability to set hw-tc-offload
in switchdev mode by reusing NIC mode calls without modifying it
to support both modes, this can cause an illegal memory access
when trying to turn hw-tc-offload off.

Fix this by using the right TC_FLAG when checking if tc rules
are installed while disabling hw-tc-offload.

Fixes: d3cbd4254df8 ("net/mlx5e: Add ndo_set_feature for uplink representor")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix wrong application of the LRO state

[ Upstream commit 7b3707fc79044871ab8f3d5fa5e9603155bb5577 ]

Driver caches packet merge type in mlx5e_params instance which must be
in perfect sync with the netdev_feature's bit.
Prior to this patch, in certain conditions (*) LRO state was set in
mlx5e_params, while netdev_feature's bit was off. Causing the LRO to
be applied on the RQs (HW level).

(*) This can happen only on profile init (mlx5e_build_nic_params()),
when RQ expect non-linear SKB and PCI is fast enough in comparison to
link width.

Solution: remove setting of packet merge type from
mlx5e_build_nic_params() as netdev features are not updated.

Fixes: 619a8f2a42f1 ("net/mlx5e: Use linear SKB in Striding RQ")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Avoid false positive lockdep warning by adding lock_class_key

[ Upstream commit d59b73a66e5e0682442b6d7b4965364e57078b80 ]

Add a lock_class_key per mlx5 device to avoid a false positive
"possible circular locking dependency" warning by lockdep, on flows
which lock more than one mlx5 device, such as adding SF.

kernel log:
 ======================================================
 WARNING: possible circular locking dependency detected
 5.19.0-rc8+ #2 Not tainted
 ------------------------------------------------------
 kworker/u20:0/8 is trying to acquire lock:
 ffff88812dfe0d98 (&dev->intf_state_mutex){+.+.}-{3:3}, at: mlx5_init_one+0x2e/0x490 [mlx5_core]

 but task is already holding lock:
 ffff888101aa7898 (&(&notifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&(&notifier->n_head)->rwsem){++++}-{3:3}:
        down_write+0x90/0x150
        blocking_notifier_chain_register+0x53/0xa0
        mlx5_sf_table_init+0x369/0x4a0 [mlx5_core]
        mlx5_init_one+0x261/0x490 [mlx5_core]
        probe_one+0x430/0x680 [mlx5_core]
        local_pci_probe+0xd6/0x170
        work_for_cpu_fn+0x4e/0xa0
        process_one_work+0x7c2/0x1340
        worker_thread+0x6f6/0xec0
        kthread+0x28f/0x330
        ret_from_fork+0x1f/0x30

 -> #0 (&dev->intf_state_mutex){+.+.}-{3:3}:
        __lock_acquire+0x2fc7/0x6720
        lock_acquire+0x1c1/0x550
        __mutex_lock+0x12c/0x14b0
        mlx5_init_one+0x2e/0x490 [mlx5_core]
        mlx5_sf_dev_probe+0x29c/0x370 [mlx5_core]
        auxiliary_bus_probe+0x9d/0xe0
        really_probe+0x1e0/0xaa0
        __driver_probe_device+0x219/0x480
        driver_probe_device+0x49/0x130
        __device_attach_driver+0x1b8/0x280
        bus_for_each_drv+0x123/0x1a0
        __device_attach+0x1a3/0x460
        bus_probe_device+0x1a2/0x260
        device_add+0x9b1/0x1b40
        __auxiliary_device_add+0x88/0xc0
        mlx5_sf_dev_state_change_handler+0x67e/0x9d0 [mlx5_core]
        blocking_notifier_call_chain+0xd5/0x130
        mlx5_vhca_state_work_handler+0x2b0/0x3f0 [mlx5_core]
        process_one_work+0x7c2/0x1340
        worker_thread+0x59d/0xec0
        kthread+0x28f/0x330
        ret_from_fork+0x1f/0x30

  other info that might help us debug this:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&(&notifier->n_head)->rwsem);
                                lock(&dev->intf_state_mutex);
                                lock(&(&notifier->n_head)->rwsem);
   lock(&dev->intf_state_mutex);

  *** DEADLOCK ***

 4 locks held by kworker/u20:0/8:
  #0: ffff888150612938 ((wq_completion)mlx5_events){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340
  #1: ffff888100cafdb8 ((work_completion)(&work->work)#3){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340
  #2: ffff888101aa7898 (&(&notifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130
  #3: ffff88813682d0e8 (&dev->mutex){....}-{3:3}, at:__device_attach+0x76/0x460

 stack backtrace:
 CPU: 6 PID: 8 Comm: kworker/u20:0 Not tainted 5.19.0-rc8+
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Workqueue: mlx5_events mlx5_vhca_state_work_handler [mlx5_core]
 Call Trace:
  <TASK>
  dump_stack_lvl+0x57/0x7d
  check_noncircular+0x278/0x300
  ? print_circular_bug+0x460/0x460
  ? lock_chain_count+0x20/0x20
  ? register_lock_class+0x1880/0x1880
  __lock_acquire+0x2fc7/0x6720
  ? register_lock_class+0x1880/0x1880
  ? register_lock_class+0x1880/0x1880
  lock_acquire+0x1c1/0x550
  ? mlx5_init_one+0x2e/0x490 [mlx5_core]
  ? lockdep_hardirqs_on_prepare+0x400/0x400
  __mutex_lock+0x12c/0x14b0
  ? mlx5_init_one+0x2e/0x490 [mlx5_core]
  ? mlx5_init_one+0x2e/0x490 [mlx5_core]
  ? _raw_read_unlock+0x1f/0x30
  ? mutex_lock_io_nested+0x1320/0x1320
  ? __ioremap_caller.constprop.0+0x306/0x490
  ? mlx5_sf_dev_probe+0x269/0x370 [mlx5_core]
  ? iounmap+0x160/0x160
  mlx5_init_one+0x2e/0x490 [mlx5_core]
  mlx5_sf_dev_probe+0x29c/0x370 [mlx5_core]
  ? mlx5_sf_dev_remove+0x130/0x130 [mlx5_core]
  auxiliary_bus_probe+0x9d/0xe0
  really_probe+0x1e0/0xaa0
  __driver_probe_device+0x219/0x480
  ? auxiliary_match_id+0xe9/0x140
  driver_probe_device+0x49/0x130
  __device_attach_driver+0x1b8/0x280
  ? driver_allows_async_probing+0x140/0x140
  bus_for_each_drv+0x123/0x1a0
  ? bus_for_each_dev+0x1a0/0x1a0
  ? lockdep_hardirqs_on_prepare+0x286/0x400
  ? trace_hardirqs_on+0x2d/0x100
  __device_attach+0x1a3/0x460
  ? device_driver_attach+0x1e0/0x1e0
  ? kobject_uevent_env+0x22d/0xf10
  bus_probe_device+0x1a2/0x260
  device_add+0x9b1/0x1b40
  ? dev_set_name+0xab/0xe0
  ? __fw_devlink_link_to_suppliers+0x260/0x260
  ? memset+0x20/0x40
  ? lockdep_init_map_type+0x21a/0x7d0
  __auxiliary_device_add+0x88/0xc0
  ? auxiliary_device_init+0x86/0xa0
  mlx5_sf_dev_state_change_handler+0x67e/0x9d0 [mlx5_core]
  blocking_notifier_call_chain+0xd5/0x130
  mlx5_vhca_state_work_handler+0x2b0/0x3f0 [mlx5_core]
  ? mlx5_vhca_event_arm+0x100/0x100 [mlx5_core]
  ? lock_downgrade+0x6e0/0x6e0
  ? lockdep_hardirqs_on_prepare+0x286/0x400
  process_one_work+0x7c2/0x1340
  ? lockdep_hardirqs_on_prepare+0x400/0x400
  ? pwq_dec_nr_in_flight+0x230/0x230
  ? rwlock_bug.part.0+0x90/0x90
  worker_thread+0x59d/0xec0
  ? process_one_work+0x1340/0x1340
  kthread+0x28f/0x330
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30
  </TASK>

Fixes: 6a3273217469 ("net/mlx5: SF, Port function state change support")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Properly disable vlan strip on non-UL reps

[ Upstream commit f37044fd759b6bc40b6398a978e0b1acdf717372 ]

When querying mlx5 non-uplink representors capabilities with ethtool
rx-vlan-offload is marked as "off [fixed]". However, it is actually always
enabled because mlx5e_params->vlan_strip_disable is 0 by default when
initializing struct mlx5e_params instance. Fix the issue by explicitly
setting the vlan_strip_disable to 'true' for non-uplink representors.

Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: xsk: prohibit usage of non-balanced queue id

[ Upstream commit 5a42f112d367bb4700a8a41f5c12724fde6bfbb9 ]

Fix the following scenario:
1. ethtool -L $IFACE rx 8 tx 96
2. xdpsock -q 10 -t -z

Above refers to a case where user would like to attach XSK socket in
txonly mode at a queue id that does not have a corresponding Rx queue.
At this moment ice's XSK logic is tightly bound to act on a "queue pair",
e.g. both Tx and Rx queues at a given queue id are disabled/enabled and
both of them will get XSK pool assigned, which is broken for the presented
queue configuration. This results in the splat included at the bottom,
which is basically an OOB access to Rx ring array.

To fix this, allow using the ids only in scope of "combined" queues
reported by ethtool. However, logic should be rewritten to allow such
configurations later on, which would end up as a complete rewrite of the
control path, so let us go with this temporary fix.

[420160.558008] BUG: kernel NULL pointer dereference, address: 0000000000000082
[420160.566359] #PF: supervisor read access in kernel mode
[420160.572657] #PF: error_code(0x0000) - not-present page
[420160.579002] PGD 0 P4D 0
[420160.582756] Oops: 0000 [#1] PREEMPT SMP NOPTI
[420160.588396] CPU: 10 PID: 21232 Comm: xdpsock Tainted: G           OE     5.19.0-rc7+ #10
[420160.597893] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[420160.609894] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice]
[420160.616968] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85
[420160.639421] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282
[420160.646650] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8
[420160.655893] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000
[420160.665166] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000
[420160.674493] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a
[420160.683833] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828
[420160.693211] FS:  00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000
[420160.703645] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[420160.711783] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0
[420160.721399] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[420160.731045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[420160.740707] PKRU: 55555554
[420160.745960] Call Trace:
[420160.750962]  <TASK>
[420160.755597]  ? kmalloc_large_node+0x79/0x90
[420160.762703]  ? __kmalloc_node+0x3f5/0x4b0
[420160.769341]  xp_assign_dev+0xfd/0x210
[420160.775661]  ? shmem_file_read_iter+0x29a/0x420
[420160.782896]  xsk_bind+0x152/0x490
[420160.788943]  __sys_bind+0xd0/0x100
[420160.795097]  ? exit_to_user_mode_prepare+0x20/0x120
[420160.802801]  __x64_sys_bind+0x16/0x20
[420160.809298]  do_syscall_64+0x38/0x90
[420160.815741]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[420160.823731] RIP: 0033:0x7fa86a0dd2fb
[420160.830264] Code: c3 66 0f 1f 44 00 00 48 8b 15 69 8b 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bc 0f 1f 44 00 00 f3 0f 1e fa b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 8b 0c 00 f7 d8 64 89 01 48
[420160.855410] RSP: 002b:00007ffc1146f618 EFLAGS: 00000246 ORIG_RAX: 0000000000000031
[420160.866366] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa86a0dd2fb
[420160.876957] RDX: 0000000000000010 RSI: 00007ffc1146f680 RDI: 0000000000000003
[420160.887604] RBP: 000055d7113a0520 R08: 00007fa868fb8000 R09: 0000000080000000
[420160.898293] R10: 0000000000008001 R11: 0000000000000246 R12: 000055d7113a04e0
[420160.909038] R13: 000055d7113a0320 R14: 000000000000000a R15: 0000000000000000
[420160.919817]  </TASK>
[420160.925659] Modules linked in: ice(OE) af_packet binfmt_misc nls_iso8859_1 ipmi_ssif intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp mei_me coretemp ioatdma mei ipmi_si wmi ipmi_msghandler acpi_pad acpi_power_meter ip_tables x_tables autofs4 ixgbe i40e crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd ahci mdio dca libahci lpc_ich [last unloaded: ice]
[420160.977576] CR2: 0000000000000082
[420160.985037] ---[ end trace 0000000000000000 ]---
[420161.097724] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice]
[420161.107341] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85
[420161.134741] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282
[420161.144274] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8
[420161.155690] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000
[420161.168088] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000
[420161.179295] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a
[420161.190420] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828
[420161.201505] FS:  00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000
[420161.213628] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[420161.223413] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0
[420161.234653] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[420161.245893] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[420161.257052] PKRU: 55555554

Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: xsk: Force rings to be sized to power of 2

[ Upstream commit 296f13ff3854535009a185aaf8e3603266d39d94 ]

With the upcoming introduction of batching to XSK data path,
performance wise it will be the best to have the ring descriptor count
to be aligned to power of 2.

Check if ring sizes that user is going to attach the XSK socket fulfill
the condition above. For Tx side, although check is being done against
the Tx queue and in the end the socket will be attached to the XDP
queue, it is fine since XDP queues get the ring->count setting from Tx
queues.

Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220125160446.78976-3-maciej.fijalkowski@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfc: pn533: Fix use-after-free bugs caused by pn532_cmd_timeout

[ Upstream commit f1e941dbf80a9b8bab0bffbc4cbe41cc7f4c6fb6 ]

When the pn532 uart device is detaching, the pn532_uart_remove()
is called. But there are no functions in pn532_uart_remove() that
could delete the cmd_timeout timer, which will cause use-after-free
bugs. The process is shown below:

    (thread 1)                  |        (thread 2)
                                |  pn532_uart_send_frame
pn532_uart_remove               |    mod_timer(&pn532->cmd_timeout,...)
  ...                           |    (wait a time)
  kfree(pn532) //FREE           |    pn532_cmd_timeout
                                |      pn532_uart_send_frame
                                |        pn532->... //USE

This patch adds del_timer_sync() in pn532_uart_remove() in order to
prevent the use-after-free bugs. What's more, the pn53x_unregister_nfc()
is well synchronized, it sets nfc_dev->shutting_down to true and there
are no syscalls could restart the cmd_timeout timer.

Fixes: c656aa4c27b1 ("nfc: pn533: add UART phy driver")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: fix the RX FIFO settings when suspending

[ Upstream commit b75d612014447e04abdf0e37ffb8f2fd8b0b49d6 ]

The RX FIFO would be changed when suspending, so the related settings
have to be modified, too. Otherwise, the flow control would work
abnormally.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216333
Reported-by: Mark Blakeney <mark.blakeney@bullet-systems.net>
Fixes: cdf0b86b250f ("r8152: fix a WOL issue")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: fix the units of some registers for RTL8156A

[ Upstream commit 6dc4df12d741c0fe8f885778a43039e0619b9cd9 ]

The units of PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY are 16 bytes.

Fixes: 195aae321c82 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rose: check NULL rose_loopback_neigh->loopback

[ Upstream commit 3c53cd65dece47dd1f9d3a809f32e59d1d87b2b8 ]

Commit 3b3fd068c56e3fbea30090859216a368398e39bf added NULL check for
`rose_loopback_neigh->dev` in rose_loopback_timer() but omitted to
check rose_loopback_neigh->loopback.

It thus prevents *all* rose connect.

The reason is that a special rose_neigh loopback has a NULL device.

/proc/net/rose_neigh illustrates it via rose_neigh_show() function :
[...]
seq_printf(seq, "%05d %-9s %-4s   %3d %3d  %3s     %3s %3lu %3lu",
   rose_neigh->number,
   (rose_neigh->loopback) ? "RSLOOP-0" : ax2asc(buf, &rose_neigh->callsign),
   rose_neigh->dev ? rose_neigh->dev->name : "???",
   rose_neigh->count,

/proc/net/rose_neigh displays special rose_loopback_neigh->loopback as
callsign RSLOOP-0:

addr  callsign  dev  count use mode restart  t0  tf digipeaters
00001 RSLOOP-0  ???      1   2  DCE     yes   0   0

By checking rose_loopback_neigh->loopback, rose_rx_call_request() is called
even in case rose_loopback_neigh->dev is NULL. This repairs rose connections.

Verification with rose client application FPAC:

FPAC-Node v 4.1.3 (built Aug  5 2022) for LINUX (help = h)
F6BVP-4 (Commands = ?) : u
Users - AX.25 Level 2 sessions :
Port   Callsign     Callsign  AX.25 state  ROSE state  NetRom status
axudp  F6BVP-5   -> F6BVP-9   Connected    Connected   ---------

Fixes: 3b3fd068c56e ("rose: Fix Null pointer dereference in rose_send_frame()")
Signed-off-by: Bernard Pidoux <f6bvp@free.fr>
Suggested-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Thomas DL9SAU Osterried <thomas@osterried.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ntfs: fix acl handling

[ Upstream commit 0c3bc7899e6dfb52df1c46118a5a670ae619645f ]

While looking at our current POSIX ACL handling in the context of some
overlayfs work I went through a range of other filesystems checking how they
handle them currently and encountered ntfs3.

The posic_acl_{from,to}_xattr() helpers always need to operate on the
filesystem idmapping. Since ntfs3 can only be mounted in the initial user
namespace the relevant idmapping is init_user_ns.

The posix_acl_{from,to}_xattr() helpers are concerned with translating between
the kernel internal struct posix_acl{_entry} and the uapi struct
posix_acl_xattr_{header,entry} and the kernel internal data structure is cached
filesystem wide.

Additional idmappings such as the caller's idmapping or the mount's idmapping
are handled higher up in the VFS. Individual filesystems usually do not need to
concern themselves with these.

The posix_acl_valid() helper is concerned with checking whether the values in
the kernel internal struct posix_acl can be represented in the filesystem's
idmapping. IOW, if they can be written to disk. So this helper too needs to
take the filesystem's idmapping.

Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: ntfs3@lists.linux.dev
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/smaps: don't access young/dirty bit if pte unpresent

[ Upstream commit efd4149342db2df41b1bbe68972ead853b30e444 ]

These bits should only be valid when the ptes are present.  Introducing
two booleans for it and set it to false when !pte_present() for both pte
and pmd accountings.

The bug is found during code reading and no real world issue reported, but
logically such an error can cause incorrect readings for either smaps or
smaps_rollup output on quite a few fields.

For example, it could cause over-estimate on values like Shared_Dirty,
Private_Dirty, Referenced.  Or it could also cause under-estimate on
values like LazyFree, Shared_Clean, Private_Clean.

Link: https://lkml.kernel.org/r/20220805160003.58929-1-peterx@redhat.com
Fixes: b1d4d9e0cbd0 ("proc/smaps: carefully handle migration entries")
Fixes: c94b6923fa0a ("/proc/PID/smaps: Add PMD migration entry parsing")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: RPC level errors should set task->tk_rpc_status

[ Upstream commit ed06fce0b034b2e25bd93430f5c4cbb28036cc1a ]

Fix up a case in call_encode() where we're failing to set
task->tk_rpc_status when an RPC level error occurred.

Fixes: 9c5948c24869 ("SUNRPC: task should be exit if encode return EKEYEXPIRED more times")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2 fix problems with __nfs42_ssc_open

[ Upstream commit fcfc8be1e9cf2f12b50dce8b579b3ae54443a014 ]

A destination server while doing a COPY shouldn't accept using the
passed in filehandle if its not a regular filehandle.

If alloc_file_pseudo() has failed, we need to decrement a reference
on the newly created inode, otherwise it leaks.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: ec4b092508982 ("NFS: inter ssc open")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Don't allocate nfs_fattr on the stack in __nfs42_ssc_open()

[ Upstream commit 156cd28562a4e8ca454d11b234d9f634a45d6390 ]

The preferred behaviour is always to allocate struct nfs_fattr from the
slab.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "net: macsec: update SCI upon MAC address change."

[ Upstream commit e82c649e851c9c25367fb7a2a6cf3479187de467 ]

This reverts commit 6fc498bc82929ee23aa2f35a828c6178dfd3f823.

Commit 6fc498bc8292 states:

    SCI should be updated, because it contains MAC in its first 6
    octets.

That's not entirely correct. The SCI can be based on the MAC address,
but doesn't have to be. We can also use any 64-bit number as the
SCI. When the SCI based on the MAC address, it uses a 16-bit "port
number" provided by userspace, which commit 6fc498bc8292 overwrites
with 1.

In addition, changing the SCI after macsec has been setup can just
confuse the receiver. If we configure the RXSC on the peer based on
the original SCI, we should keep the same SCI on TX.

When the macsec device is being managed by a userspace key negotiation
daemon such as wpa_supplicant, commit 6fc498bc8292 would also
overwrite the SCI defined by userspace.

Fixes: 6fc498bc8292 ("net: macsec: update SCI upon MAC address change.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/9b1a9d28327e7eb54550a92eebda45d25e54dd0d.1660667033.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: use eth_hw_addr_set() instead of ether_addr_copy()

[ Upstream commit e35b8d7dbb094c79daf920797c372911edc2d525 ]

Convert from ether_addr_copy() to eth_hw_addr_set():

  @@
  expression dev, np;
  @@
  - ether_addr_copy(dev->dev_addr, np)
  + eth_hw_addr_set(dev, np)

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: require CAP_SYS_ADMIN in target namespace for idmapped mounts

[ Upstream commit bf1ac16edf6770a92bc75cf2373f1f9feea398a4 ]

Idmapped mounts should not allow a user to map file ownsership into a
range of ids which is not under the control of that user. However, we
currently don't check whether the mounter is privileged wrt to the
target user namespace.

Currently no FS_USERNS_MOUNT filesystems support idmapped mounts, thus
this is not a problem as only CAP_SYS_ADMIN in init_user_ns is allowed
to set up idmapped mounts. But this could change in the future, so add a
check to refuse to create idmapped mounts when the mounter does not have
CAP_SYS_ADMIN in the target user namespace.

Fixes: bd303368b776 ("fs: support mapped mounts of mapped filesystems")
Signed-off-by: Seth Forshee <sforshee@digitalocean.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220816164752.2595240-1-sforshee@digitalocean.com
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: policy: fix metadata dst->dev xmit null pointer dereference

[ Upstream commit 17ecd4a4db4783392edd4944f5e8268205083f70 ]

When we try to transmit an skb with metadata_dst attached (i.e. dst->dev
== NULL) through xfrm interface we can hit a null pointer dereference[1]
in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a
loopback skb device when there's no policy which dereferences dst->dev
unconditionally. Not having dst->dev can be interepreted as it not being
a loopback device, so just add a check for a null dst_orig->dev.

With this fix xfrm interface's Tx error counters go up as usual.

[1] net-next calltrace captured via netconsole:
  BUG: kernel NULL pointer dereference, address: 00000000000000c0
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] PREEMPT SMP
  CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ #24
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014
  RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60
  Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02
  RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80
  RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000
  R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880
  R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000
  FS:  00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0
  Call Trace:
   <TASK>
   xfrmi_xmit+0xde/0x460
   ? tcf_bpf_act+0x13d/0x2a0
   dev_hard_start_xmit+0x72/0x1e0
   __dev_queue_xmit+0x251/0xd30
   ip_finish_output2+0x140/0x550
   ip_push_pending_frames+0x56/0x80
   raw_sendmsg+0x663/0x10a0
   ? try_charge_memcg+0x3fd/0x7a0
   ? __mod_memcg_lruvec_state+0x93/0x110
   ? sock_sendmsg+0x30/0x40
   sock_sendmsg+0x30/0x40
   __sys_sendto+0xeb/0x130
   ? handle_mm_fault+0xae/0x280
   ? do_user_addr_fault+0x1e7/0x680
   ? kvm_read_and_reset_apf_flags+0x3b/0x50
   __x64_sys_sendto+0x20/0x30
   do_syscall_64+0x34/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0
  RIP: 0033:0x7ff35cac1366
  Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89
  RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
  RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366
  RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003
  RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010
  R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
  R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001
   </TASK>
  Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole]
  CR2: 00000000000000c0

CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_key: Do not call xfrm_probe_algs in parallel

[ Upstream commit ba953a9d89a00c078b85f4b190bc1dde66fe16b5 ]

When namespace support was added to xfrm/afkey, it caused the
previously single-threaded call to xfrm_probe_algs to become
multi-threaded.  This is buggy and needs to be fixed with a mutex.

Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Fixes: 283bc9f35bbb ("xfrm: Namespacify xfrm state/policy locks")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: clone missing x->lastused in xfrm_do_migrate

[ Upstream commit 6aa811acdb76facca0b705f4e4c1d948ccb6af8b ]

x->lastused was not cloned in xfrm_do_migrate. Add it to clone during
migrate.

Fixes: 80c9abaabf42 ("[XFRM]: Extension for dynamic update of endpoint address(es)")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: fix refcount leak in __xfrm_policy_check()

[ Upstream commit 9c9cb23e00ddf45679b21b4dacc11d1ae7961ebe ]

The issue happens on an error path in __xfrm_policy_check(). When the
fetching process of the object `pols[1]` fails, the function simply
returns 0, forgetting to decrement the reference count of `pols[0]`,
which is incremented earlier by either xfrm_sk_policy_lookup() or
xfrm_policy_lookup(). This may result in memory leaks.

Fix it by decreasing the reference count of `pols[0]` in that path.

Fixes: 134b0fc544ba ("IPsec: propagate security module errors up from flow_cache_lookup")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: lib: uaccess: fix CSR_STATUS SR_SUM bit

[ Upstream commit c08b4848f596fd95543197463b5162bd7bab2442 ]

Since commit 5d8544e2d007 ("RISC-V: Generic library routines and assembly")
and commit ebcbd75e3962 ("riscv: Fix the bug in memory access fixup code"),
if __clear_user and __copy_user return from an fixup branch,
CSR_STATUS SR_SUM bit will be set, it is a vulnerability, so that
S-mode memory accesses to pages that are accessible by U-mode will success.
Disable S-mode access to U-mode memory should clear SR_SUM bit.

Fixes: 5d8544e2d007 ("RISC-V: Generic library routines and assembly")
Fixes: ebcbd75e3962 ("riscv: Fix the bug in memory access fixup code")
Signed-off-by: Chen Lifu <chenlifu@huawei.com>
Reviewed-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20220615014714.1650349-1-chenlifu@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: lib: uaccess: fold fixups into body

[ Upstream commit 9d504f9aa5c1b76673018da9503e76b351a24b8c ]

uaccess functions such __asm_copy_to_user(),  __arch_copy_from_user()
and __clear_user() place their exception fixups in the `.fixup` section
without any clear association with themselves. If we backtrace the
fixup code, it will be symbolized as an offset from the nearest prior
symbol.

Similar as arm64 does, we must move fixups into the body of the
functions themselves, after the usual fast-path returns.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: remove unnecessary parameter delalloc_start for writepage_delalloc()

[ Upstream commit cf3075fb36c6a98ea890f4a50b4419ff2fff9a2f ]

In function __extent_writepage() we always pass page start to
@delalloc_start for writepage_delalloc().

Thus we don't really need @delalloc_start parameter as we can extract it
from @page.

Remove @delalloc_start parameter and make __extent_writepage() to
declare @page_start and @page_end as const.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: pass the dentry to btrfs_log_new_name() instead of the inode

[ Upstream commit d5f5bd546552a94eefd68c42f40f778c40a89d2c ]

In the next patch in the series, there will be the need to access the old
name, and its length, of an inode when logging the inode during a rename.
So instead of passing the inode to btrfs_log_new_name() pass the dentry,
because from the dentry we can get the inode, the name and its length.

This will avoid passing 3 new parameters to btrfs_log_new_name() in the
next patch - the name, its length and an index number. This way we end
up passing only 1 new parameter, the index number.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: put initial index value of a directory in a constant

[ Upstream commit 528ee697126fddaff448897c2d649bd756153c79 ]

At btrfs_set_inode_index_count() we refer twice to the number 2 as the
initial index value for a directory (when it's empty), with a proper
comment explaining the reason for that value. In the next patch I'll
have to use that magic value in the directory logging code, so put
the value in a #define at btrfs_inode.h, to avoid hardcoding the
magic value again at tree-log.c.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Fix dropped IKE message

[ Upstream commit c019cd656e717349ff22d0c41d6fbfc773f48c52 ]

This patch fixes IKE message being dropped due to error in processing Purex
IOCB and Continuation IOCBs.

Link: https://lore.kernel.org/r/20220713052045.10683-6-njavali@marvell.com
Fixes: fac2807946c1 ("scsi: qla2xxx: edif: Add extraction of auth_els from the wire")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix response queue handler reading stale packets

[ Upstream commit b1f707146923335849fb70237eec27d4d1ae7d62 ]

On some platforms, the current logic of relying on finding new packet
solely based on signature pattern can lead to driver reading stale
packets. Though this is a bug in those platforms, reduce such exposures by
limiting reading packets until the IN pointer.

Two module parameters are introduced:

  ql2xrspq_follow_inptr:

    When set, on newer adapters that has queue pointer shadowing, look for
    response packets only until response queue in pointer.

    When reset, response packets are read based on a signature pattern
    logic (old way).

  ql2xrspq_follow_inptr_legacy:

    Like ql2xrspq_follow_inptr, but for those adapters where there is no
    queue pointer shadowing.

Link: https://lore.kernel.org/r/20220713052045.10683-5-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist

[ Upstream commit 7ee951acd31a88f941fd6535fbdee3a1567f1d63 ]

Using bin_attributes with a 0 size causes fstat and friends to return that
0 size. This breaks userspace code that retrieves the size before reading
the file. Rather than reverting 75bd50fa841 ("drivers/base/node.c: use
bin_attribute to break the size limitation of cpumap ABI") let's put in a
size value at compile time.

For cpulist the maximum size is on the order of
NR_CPUS * (ceil(log10(NR_CPUS)) + 1)/2

which for 8192 is 20480 (8192 * 5)/2. In order to get near that you'd need
a system with every other CPU on one node. For example: (0,2,4,8, ... ).
To simplify the math and support larger NR_CPUS in the future we are using
(NR_CPUS * 7)/2. We also set it to a min of PAGE_SIZE to retain the older
behavior for smaller NR_CPUS.

The cpumap file the size works out to be NR_CPUS/4 + NR_CPUS/32 - 1
(or NR_CPUS * 9/32 - 1) including the ","s.

Add a set of macros for these values to cpumask.h so they can be used in
multiple places. Apply these to the handful of such files in
drivers/base/topology.c as well as node.c.

As an example, on an 80 cpu 4-node system (NR_CPUS == 8192):

before:

-r--r--r--. 1 root root 0 Jul 12 14:08 system/node/node0/cpulist
-r--r--r--. 1 root root 0 Jul 11 17:25 system/node/node0/cpumap

after:

-r--r--r--. 1 root root 28672 Jul 13 11:32 system/node/node0/cpulist
-r--r--r--. 1 root root  4096 Jul 13 11:31 system/node/node0/cpumap

CONFIG_NR_CPUS = 16384
-r--r--r--. 1 root root 57344 Jul 13 14:03 system/node/node0/cpulist
-r--r--r--. 1 root root  4607 Jul 13 14:02 system/node/node0/cpumap

The actual number of cpus doesn't matter for the reported size since they
are based on NR_CPUS.

Fixes: 75bd50fa841d ("drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI")
Fixes: bb9ec13d156e ("topology: use bin_attribute to break the size limitation of cpumap ABI")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Yury Norov <yury.norov@gmail.com> (for include/linux/cpumask.h)
Signed-off-by: Phil Auld <pauld@redhat.com>
Link: https://lore.kernel.org/r/20220715134924.3466194-1-pauld@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: i8042 - add additional TUXEDO devices to i8042 quirk tables

[ Upstream commit 436d219069628f0f0ed27f606224d4ee02a0ca17 ]

A lot of modern Clevo barebones have touchpad and/or keyboard issues after
suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them
have an external PS/2 port so this can safely be set for all of them.

I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use. No negative effects could be
observed when setting all four.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220708161005.1251929-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: i8042 - add TUXEDO devices to i8042 quirk tables

[ Upstream commit a6a87c36165e6791eeaed88025cde270536c3198 ]

A lot of modern Clevo barebones have touchpad and/or keyboard issues after
suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them
have an external PS/2 port so this can safely be set for all of them.

I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use. No negative effects could be
observed when setting all four.

The list is quite massive as neither the TUXEDO nor the Clevo dmi strings
have been very consistent historically. I tried to keep the list as short
as possible without risking on missing an affected device.

This is revision 3. The Clevo N150CU barebone is still removed as it might
have problems with the fix and needs further investigations. The
SchenkerTechnologiesGmbH System-/Board-Vendor string variations are
added. This is now based in the quirk table refactor. This now also
includes the additional noaux flag for the NS7xMU.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220629112725.12922-5-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: i8042 - merge quirk tables

[ Upstream commit ff946268a0813c35b790dfbe07c3bfaa7bfb869c ]

Merge i8042 quirk tables to reduce code duplication for devices that need
more than one quirk. Before every quirk had its own table with devices
needing that quirk. If a new quirk needed to be added a new table had to
be created. When a device needed multiple quirks, it appeared in multiple
tables. Now only one table called i8042_dmi_quirk_table exists. In it every
device has one entry and required quirks are coded in the .driver_data
field of the struct dmi_system_id used by this table. Multiple quirks for
one device can be applied by bitwise-or of the new SERIO_QUIRK_* defines.

Also align quirkable options with command line parameters and make vendor
wide quirks per device overwriteable on a per device basis. The first match
is honored while following matches are ignored. So when a vendor wide quirk
is defined in the table, a device can inserted before and therefore
ignoring the vendor wide define.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220629112725.12922-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: i8042 - move __initconst to fix code styling warning

[ Upstream commit 95a9916c909f0b1d95e24b4232b4bc38ff755415 ]

Move __intconst from before i8042_dmi_laptop_table[] to after it for
consistent code styling.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220629112725.12922-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: convert count_max_extents() to use fs_info->max_extent_size

commit 7d7672bc5d1038c745716c397d892d21e29de71c upstream

If count_max_extents() uses BTRFS_MAX_EXTENT_SIZE to calculate the number
of extents needed, btrfs release the metadata reservation too much on its
way to write out the data.

Now that BTRFS_MAX_EXTENT_SIZE is replaced with fs_info->max_extent_size,
convert count_max_extents() to use it instead, and fix the calculation of
the metadata reservation.

CC: stable@vger.kernel.org # 5.12+
Fixes: d8e3fb106f39 ("btrfs: zoned: use ZONE_APPEND write for zoned mode")
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: replace BTRFS_MAX_EXTENT_SIZE with fs_info->max_extent_size

commit f7b12a62f008a3041f42f2426983e59a6a0a3c59 upstream

On zoned filesystem, data write out is limited by max_zone_append_size,
and a large ordered extent is split according the size of a bio. OTOH,
the number of extents to be written is calculated using
BTRFS_MAX_EXTENT_SIZE, and that estimated number is used to reserve the
metadata bytes to update and/or create the metadata items.

The metadata reservation is done at e.g, btrfs_buffered_write() and then
released according to the estimation changes. Thus, if the number of extent
increases massively, the reserved metadata can run out.

The increase of the number of extents easily occurs on zoned filesystem
if BTRFS_MAX_EXTENT_SIZE > max_zone_append_size. And, it causes the
following warning on a small RAM environment with disabling metadata
over-commit (in the following patch).

[75721.498492] ------------[ cut here ]------------
[75721.505624] BTRFS: block rsv 1 returned -28
[75721.512230] WARNING: CPU: 24 PID: 2327559 at fs/btrfs/block-rsv.c:537 btrfs_use_block_rsv+0x560/0x760 [btrfs]
[75721.581854] CPU: 24 PID: 2327559 Comm: kworker/u64:10 Kdump: loaded Tainted: G        W         5.18.0-rc2-BTRFS-ZNS+ #109
[75721.597200] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021
[75721.607310] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
[75721.616209] RIP: 0010:btrfs_use_block_rsv+0x560/0x760 [btrfs]
[75721.646649] RSP: 0018:ffffc9000fbdf3e0 EFLAGS: 00010286
[75721.654126] RAX: 0000000000000000 RBX: 0000000000004000 RCX: 0000000000000000
[75721.663524] RDX: 0000000000000004 RSI: 0000000000000008 RDI: fffff52001f7be6e
[75721.672921] RBP: ffffc9000fbdf420 R08: 0000000000000001 R09: ffff889f8d1fc6c7
[75721.682493] R10: ffffed13f1a3f8d8 R11: 0000000000000001 R12: ffff88980a3c0e28
[75721.692284] R13: ffff889b66590000 R14: ffff88980a3c0e40 R15: ffff88980a3c0e8a
[75721.701878] FS:  0000000000000000(0000) GS:ffff889f8d000000(0000) knlGS:0000000000000000
[75721.712601] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[75721.720726] CR2: 000055d12e05c018 CR3: 0000800193594000 CR4: 0000000000350ee0
[75721.730499] Call Trace:
[75721.735166]  <TASK>
[75721.739886]  btrfs_alloc_tree_block+0x1e1/0x1100 [btrfs]
[75721.747545]  ? btrfs_alloc_logged_file_extent+0x550/0x550 [btrfs]
[75721.756145]  ? btrfs_get_32+0xea/0x2d0 [btrfs]
[75721.762852]  ? btrfs_get_32+0xea/0x2d0 [btrfs]
[75721.769520]  ? push_leaf_left+0x420/0x620 [btrfs]
[75721.776431]  ? memcpy+0x4e/0x60
[75721.781931]  split_leaf+0x433/0x12d0 [btrfs]
[75721.788392]  ? btrfs_get_token_32+0x580/0x580 [btrfs]
[75721.795636]  ? push_for_double_split.isra.0+0x420/0x420 [btrfs]
[75721.803759]  ? leaf_space_used+0x15d/0x1a0 [btrfs]
[75721.811156]  btrfs_search_slot+0x1bc3/0x2790 [btrfs]
[75721.818300]  ? lock_downgrade+0x7c0/0x7c0
[75721.824411]  ? free_extent_buffer.part.0+0x107/0x200 [btrfs]
[75721.832456]  ? split_leaf+0x12d0/0x12d0 [btrfs]
[75721.839149]  ? free_extent_buffer.part.0+0x14f/0x200 [btrfs]
[75721.846945]  ? free_extent_buffer+0x13/0x20 [btrfs]
[75721.853960]  ? btrfs_release_path+0x4b/0x190 [btrfs]
[75721.861429]  btrfs_csum_file_blocks+0x85c/0x1500 [btrfs]
[75721.869313]  ? rcu_read_lock_sched_held+0x16/0x80
[75721.876085]  ? lock_release+0x552/0xf80
[75721.881957]  ? btrfs_del_csums+0x8c0/0x8c0 [btrfs]
[75721.888886]  ? __kasan_check_write+0x14/0x20
[75721.895152]  ? do_raw_read_unlock+0x44/0x80
[75721.901323]  ? _raw_write_lock_irq+0x60/0x80
[75721.907983]  ? btrfs_global_root+0xb9/0xe0 [btrfs]
[75721.915166]  ? btrfs_csum_root+0x12b/0x180 [btrfs]
[75721.921918]  ? btrfs_get_global_root+0x820/0x820 [btrfs]
[75721.929166]  ? _raw_write_unlock+0x23/0x40
[75721.935116]  ? unpin_extent_cache+0x1e3/0x390 [btrfs]
[75721.942041]  btrfs_finish_ordered_io.isra.0+0xa0c/0x1dc0 [btrfs]
[75721.949906]  ? try_to_wake_up+0x30/0x14a0
[75721.955700]  ? btrfs_unlink_subvol+0xda0/0xda0 [btrfs]
[75721.962661]  ? rcu_read_lock_sched_held+0x16/0x80
[75721.969111]  ? lock_acquire+0x41b/0x4c0
[75721.974982]  finish_ordered_fn+0x15/0x20 [btrfs]
[75721.981639]  btrfs_work_helper+0x1af/0xa80 [btrfs]
[75721.988184]  ? _raw_spin_unlock_irq+0x28/0x50
[75721.994643]  process_one_work+0x815/0x1460
[75722.000444]  ? pwq_dec_nr_in_flight+0x250/0x250
[75722.006643]  ? do_raw_spin_trylock+0xbb/0x190
[75722.013086]  worker_thread+0x59a/0xeb0
[75722.018511]  kthread+0x2ac/0x360
[75722.023428]  ? process_one_work+0x1460/0x1460
[75722.029431]  ? kthread_complete_and_exit+0x30/0x30
[75722.036044]  ret_from_fork+0x22/0x30
[75722.041255]  </TASK>
[75722.045047] irq event stamp: 0
[75722.049703] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[75722.057610] hardirqs last disabled at (0): [<ffffffff8118a94a>] copy_process+0x1c1a/0x66b0
[75722.067533] softirqs last  enabled at (0): [<ffffffff8118a989>] copy_process+0x1c59/0x66b0
[75722.077423] softirqs last disabled at (0): [<0000000000000000>] 0x0
[75722.085335] ---[ end trace 0000000000000000 ]---

To fix the estimation, we need to introduce fs_info->max_extent_size to
replace BTRFS_MAX_EXTENT_SIZE, which allow setting the different size for
regular vs zoned filesystem.

Set fs_info->max_extent_size to BTRFS_MAX_EXTENT_SIZE by default. On zoned
filesystem, it is set to fs_info->max_zone_append_size.

CC: stable@vger.kernel.org # 5.12+
Fixes: d8e3fb106f39 ("btrfs: zoned: use ZONE_APPEND write for zoned mode")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: revive max_zone_append_bytes

commit c2ae7b772ef4e86c5ddf3fd47bf59045ae96a414 upstream

This patch is basically a revert of commit 5a80d1c6a270 ("btrfs: zoned:
remove max_zone_append_size logic"), but without unnecessary ASSERT and
check. The max_zone_append_size will be used as a hint to estimate the
number of extents to cover delalloc/writeback region in the later commits.

The size of a ZONE APPEND bio is also limited by queue_max_segments(), so
this commit considers it to calculate max_zone_append_size. Technically, a
bio can be larger than queue_max_segments() * PAGE_SIZE if the pages are
contiguous. But, it is safe to consider "queue_max_segments() * PAGE_SIZE"
as an upper limit of an extent size to calculate the number of extents
needed to write data.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: add bdev_max_segments() helper

commit 65ea1b66482f415d51cd46515b02477257330339 upstream

Add bdev_max_segments() like other queue parameters.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: add a bdev_max_zone_append_sectors helper

commit 2aba0d19f4d8c8929b4b3b94a9cfde2aa20e6ee2 upstream

Add a helper to check the max supported sectors for zone append based on
the block_device instead of having to poke into the block layer internal
request_queue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry: Move CLD to the start of the idtentry macro

commit c64cc2802a784ecfd25d39945e57e7a147854a5b upstream.

Move it after CLAC.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220503032107.680190-5-jiangshanlai@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/sys_ni: add compat entry for fadvise64_64

commit a8faed3a02eeb75857a3b5d660fa80fe79db77a3 upstream.

When CONFIG_ADVISE_SYSCALLS is not set/enabled and CONFIG_COMPAT is
set/enabled, the riscv compat_syscall_table references
'compat_sys_fadvise64_64', which is not defined:

riscv64-linux-ld: arch/riscv/kernel/compat_syscall_table.o:(.rodata+0x6f8):
undefined reference to `compat_sys_fadvise64_64'

Add 'fadvise64_64' to kernel/sys_ni.c as a conditional COMPAT function so
that when CONFIG_ADVISE_SYSCALLS is not set, there is a fallback function
available.

Link: https://lkml.kernel.org/r/20220807220934.5689-1-rdunlap@infradead.org
Fixes: d3ac21cacc24 ("mm: Support compiling out madvise and fadvise")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix exception handler for fldw and fstw instructions

commit 7ae1f5508d9a33fd58ed3059bd2d569961e3b8bd upstream.

The exception handler is broken for unaligned memory acceses with fldw
and fstw instructions, because it trashes or uses randomly some other
floating point register than the one specified in the instruction word
on loads and stores.

The instruction "fldw 0(addr),%fr22L" (and the other fldw/fstw
instructions) encode the target register (%fr22) in the rightmost 5 bits
of the instruction word. The 7th rightmost bit of the instruction word
defines if the left or right half of %fr22 should be used.

While processing unaligned address accesses, the FR3() define is used to
extract the offset into the local floating-point register set.  But the
calculation in FR3() was buggy, so that for example instead of %fr22,
register %fr12 [((22 * 2) & 0x1f) = 12] was used.

This bug has been since forever in the parisc kernel and I wonder why it
wasn't detected earlier. Interestingly I noticed this bug just because
the libime debian package failed to build on *native* hardware, while it
successfully built in qemu.

This patch corrects the bitshift and masking calculation in FR3().

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Make CONFIG_64BIT available for ARCH=parisc64 only

commit 3dcfb729b5f4a0c9b50742865cd5e6c4dbcc80dc upstream.

With this patch the ARCH= parameter decides if the
CONFIG_64BIT option will be set or not. This means, the
ARCH= parameter will give:

ARCH=parisc -> 32-bit kernel
ARCH=parisc64 -> 64-bit kernel

This simplifies the usage of the other config options like
randconfig, allmodconfig and allyesconfig a lot and produces
the output which is expected for parisc64 (64-bit) vs. parisc (32-bit).

Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> # 5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: Fix race condition at rebind_subsystems()

commit 763f4fb76e24959c370cdaa889b2492ba6175580 upstream.

Root cause:
The rebind_subsystems() is no lock held when move css object from A
list to B list,then let B's head be treated as css node at
list_for_each_entry_rcu().

Solution:
Add grace period before invalidating the removed rstat_css_node.

Reported-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Suggested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Tested-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Link: https://lore.kernel.org/linux-arm-kernel/d8f0bc5e2fb6ed259f9334c83279b4c011283c41.camel@mediatek.com/T/
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Fixes: a7df69b81aac ("cgroup: rstat: support cgroup1")
Cc: stable@vger.kernel.org # v5.13+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: fix potential double free on error path from fsnotify_add_inode_mark

commit ad982c3be4e60c7d39c03f782733503cbd88fd2a upstream.

Audit_alloc_mark() assign pathname to audit_mark->path, on error path
from fsnotify_add_inode_mark(), fsnotify_put_mark will free memory
of audit_mark->path, but the caller of audit_alloc_mark will free
the pathname again, so there will be double free problem.

Fix this by resetting audit_mark->path to NULL pointer on error path
from fsnotify_add_inode_mark().

Cc: stable@vger.kernel.org
Fixes: 7b1293234084d ("fsnotify: Add group pointer in fsnotify_init_mark()")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eth: sun: cassini: remove dead code

commit 32329216ca1d6ee29c41215f18b3053bb6158541 upstream.

Fixes the following GCC warning:

drivers/net/ethernet/sun/cassini.c:1316:29: error: comparison between two arrays [-Werror=array-compare]
drivers/net/ethernet/sun/cassini.c:3783:34: error: comparison between two arrays [-Werror=array-compare]

Note that 2 arrays should be compared by comparing of their addresses:
note: use ‘&cas_prog_workaroundtab[0] == &cas_prog_null[0]’ to compare the addresses

Signed-off-by: Martin Liska <mliska@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: rtlwifi: remove always-true condition pointed out by GCC 12

commit ee3db469dd317e82f57b13aa3bc61be5cb60c2b4 upstream.

The .value is a two-dim array, not a pointer.

struct iqk_matrix_regs {
bool iqk_done;
        long value[1][IQK_MATRIX_REG_NUM];
};

Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cc: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.63

Link: https://lore.kernel.org/r/20220823080059.091088642@linuxfoundation.org
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220824065913.068916566@linuxfoundation.org
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: reject crazy array sizes being fed to XFS_IOC_GETBMAP*

[ Upstream commit 29d650f7e3ab55283b89c9f5883d0c256ce478b5 ]

Syzbot tripped over the following complaint from the kernel:

WARNING: CPU: 2 PID: 15402 at mm/util.c:597 kvmalloc_node+0x11e/0x125 mm/util.c:597

While trying to run XFS_IOC_GETBMAP against the following structure:

struct getbmap fubar = {
.bmv_count = 0x22dae649,
};

Obviously, this is a crazy huge value since the next thing that the
ioctl would do is allocate 37GB of memory.  This is enough to make
kvmalloc mad, but isn't large enough to trip the validation functions.
In other words, I'm fussing with checks that were **already sufficient**
because that's easier than dealing with 644 internal bug reports.  Yes,
that's right, six hundred and forty-four.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Catherine Hoang <catherine.hoang@oracle.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: revert "xfs: actually bump warning counts when we send warnings"

[ Upstream commit bc37e4fb5cac2925b2e286b1f1d4fc2b519f7d92 ]

This reverts commit 4b8628d57b725b32616965e66975fcdebe008fe7.

XFS quota has had the concept of a "quota warning limit" since
the earliest Irix implementation, but a mechanism for incrementing
the warning counter was never implemented, as documented in the
xfs_quota(8) man page. We do know from the historical archive that
it was never incremented at runtime during quota reservation
operations.

With this commit, the warning counter quickly increments for every
allocation attempt after the user has crossed a quote soft
limit threshold, and this in turn transitions the user to hard
quota failures, rendering soft quota thresholds and timers useless.
This was reported as a regression by users.

Because the intended behavior of this warning counter has never been
understood or documented, and the result of this change is a regression
in soft quota functionality, revert this commit to make soft quota
limits and timers operable again.

Fixes: 4b8628d57b72 ("xfs: actually bump warning counts when we send warnings)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>