pinctrl: ocelot: Fix alt mode for ocelot

[ Upstream commit 657fd9da2d4b4aa0a384105b236baa22fa0233bf ]

In case the driver was trying to set an alternate mode for gpio
0 or 32 then the mode was not set correctly. The reason is that
there is computation error inside the function ocelot_pinmux_set_mux
because in this case it was trying to shift to left by -1.
Fix this by actually shifting the function bits and not the position.

Fixes: 4b36082e2e09 ("pinctrl: ocelot: fix pinmuxing for pins after 31")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230206203720.1177718-1-horatiu.vultur@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow

[ Upstream commit 924531326e2dd4ceabe7240f2b55a88e7d894ec2 ]

The cache needs to be flushed to ensure that the hardware stops offloading
the flow immediately.

Fixes: 33fc42de3327 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230330120840.52079-3-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mtk_eth_soc: fix flow block refcounting logic

[ Upstream commit 8c1cb87c2a5c29da416848451a687473f379611c ]

Since we call flow_block_cb_decref on FLOW_BLOCK_UNBIND, we also need to
call flow_block_cb_incref for a newly allocated cb.
Also fix the accidentally inverted refcount check on unbind.

Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230330120840.52079-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mv88e6xxx: Enable IGMP snooping on user ports only

[ Upstream commit 7bcad0f0e6fbc1d613e49e0ee35c8e5f2e685bb0 ]

Do not set the MV88E6XXX_PORT_CTL0_IGMP_MLD_SNOOP bit on CPU or DSA ports.

This allows the host CPU port to be a regular IGMP listener by sending out
IGMP Membership Reports, which would otherwise not be forwarded by the
mv88exxx chip, but directly looped back to the CPU port itself.

Fixes: 54d792f257c6 ("net: dsa: Centralise global and port setup code into mv88e6xxx.")
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230329150140.701559-1-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Add missing 200G link speed reporting

[ Upstream commit 581bce7bcb7e7f100908728e7b292e266c76895b ]

bnxt_fw_to_ethtool_speed() is missing the case statement for 200G
link speed reported by firmware.  As a result, ethtool will report
unknown speed when the firmware reports 200G link speed.

Fixes: 532262ba3b84 ("bnxt_en: ethtool: support PAM4 link speeds up to 200G")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix typo in PCI id to device description string mapping

[ Upstream commit 62aad36ed31abc80f35db11e187e690448a79f7d ]

Fix 57502 and 57508 NPAR description string entries.  The typos
caused these devices to not match up with lspci output.

Fixes: 49c98421e6ab ("bnxt_en: Add PCI IDs for 57500 series NPAR devices.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix reporting of test result in ethtool selftest

[ Upstream commit 83714dc3db0e4a088673601bc8099b079bc1a077 ]

When the selftest command fails, driver is not reporting the failure
by updating the "test->flags" when bnxt_close_nic() fails.

Fixes: eb51365846bc ("bnxt_en: Add basic ethtool -t selftest support.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: fix registers dump after run ethtool adapter self test

[ Upstream commit c5cff16f461a4a434a9915a7be7ac9ced861a8a4 ]

Fix invalid registers dump from ethtool -d ethX after adapter self test
by ethtool -t ethY. It causes invalid data display.

The problem was caused by overwriting i40e_reg_list[].elements
which is common for ethtool self test and dump.

Fixes: 22dd9ae8afcc ("i40e: Rework register diagnostic")
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230328172659.3906413-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipa: compute DMA pool size properly

[ Upstream commit 6c75dc94f2b27fff57b305af9236eea181a00b6c ]

In gsi_trans_pool_init_dma(), the total size of a pool of memory
used for DMA transactions is calculated.  However the calculation is
done incorrectly.

For 4KB pages, this total size is currently always more than one
page, and as a result, the calculation produces a positive (though
incorrect) total size.  The code still works in this case; we just
end up with fewer DMA pool entries than we intended.

Bjorn Andersson tested booting a kernel with 16KB pages, and hit a
null pointer derereference in sg_alloc_append_table_from_pages(),
descending from gsi_trans_pool_init_dma().  The cause of this was
that a 16KB total size was going to be allocated, and with 16KB
pages the order of that allocation is 0.  The total_size calculation
yielded 0, which eventually led to the crash.

Correcting the total_size calculation fixes the problem.

Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Fixes: 9dd441e4ed57 ("soc: qcom: ipa: GSI transactions")
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230328162751.2861791-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: ymfpci: Fix BUG_ON in probe function

[ Upstream commit 6be2e7522eb529b41c16d459f33bbdbcddbf5c15 ]

The snd_dma_buffer.bytes field now contains the aligned size, which this
snd_BUG_ON() did not account for, resulting in the following:

[    9.625915] ------------[ cut here ]------------
[    9.633440] WARNING: CPU: 0 PID: 126 at sound/pci/ymfpci/ymfpci_main.c:2168 snd_ymfpci_create+0x681/0x698 [snd_ymfpci]
[    9.648926] Modules linked in: snd_ymfpci(+) snd_intel_dspcfg kvm(+) snd_intel_sdw_acpi snd_ac97_codec snd_mpu401_uart snd_opl3_lib irqbypass snd_hda_codec gameport snd_rawmidi crct10dif_pclmul crc32_pclmul cfg80211 snd_hda_core polyval_clmulni polyval_generic gf128mul snd_seq_device ghash_clmulni_intel snd_hwdep ac97_bus sha512_ssse3 rfkill snd_pcm aesni_intel tg3 snd_timer crypto_simd snd mxm_wmi libphy cryptd k10temp fam15h_power pcspkr soundcore sp5100_tco wmi acpi_cpufreq mac_hid dm_multipath sg loop fuse dm_mod bpf_preload ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 sr_mod cdrom ata_generic pata_acpi firewire_ohci crc32c_intel firewire_core xhci_pci crc_itu_t pata_via xhci_pci_renesas floppy
[    9.711849] CPU: 0 PID: 126 Comm: kworker/0:2 Not tainted 6.1.21-1-lts #1 08d2e5ece03136efa7c6aeea9a9c40916b1bd8da
[    9.722200] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014
[    9.732204] Workqueue: events work_for_cpu_fn
[    9.736580] RIP: 0010:snd_ymfpci_create+0x681/0x698 [snd_ymfpci]
[    9.742594] Code: 8c c0 4c 89 e2 48 89 df 48 c7 c6 92 c6 8c c0 e8 15 d0 e9 ff 48 83 c4 08 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f e9 d3 7a 33 e3 <0f> 0b e9 cb fd ff ff 41 bd fb ff ff ff eb db 41 bd f4 ff ff ff eb
[    9.761358] RSP: 0018:ffffab64804e7da0 EFLAGS: 00010287
[    9.766594] RAX: ffff8fa2df06c400 RBX: ffff8fa3073a8000 RCX: ffff8fa303fbc4a8
[    9.773734] RDX: ffff8fa2df06d000 RSI: 0000000000000010 RDI: 0000000000000020
[    9.780876] RBP: ffff8fa300b5d0d0 R08: ffff8fa3073a8e50 R09: 00000000df06bf00
[    9.788018] R10: ffff8fa2df06bf00 R11: 00000000df068200 R12: ffff8fa3073a8918
[    9.795159] R13: 0000000000000000 R14: 0000000000000080 R15: ffff8fa2df068200
[    9.802317] FS:  0000000000000000(0000) GS:ffff8fa9fec00000(0000) knlGS:0000000000000000
[    9.810414] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    9.816158] CR2: 000055febaf66500 CR3: 0000000101a2e000 CR4: 00000000000406f0
[    9.823301] Call Trace:
[    9.825747]  <TASK>
[    9.827889]  snd_card_ymfpci_probe+0x194/0x950 [snd_ymfpci b78a5fe64b5663a6390a909c67808567e3e73615]
[    9.837030]  ? finish_task_switch.isra.0+0x90/0x2d0
[    9.841918]  local_pci_probe+0x45/0x80
[    9.845680]  work_for_cpu_fn+0x1a/0x30
[    9.849431]  process_one_work+0x1c7/0x380
[    9.853464]  worker_thread+0x1af/0x390
[    9.857225]  ? rescuer_thread+0x3b0/0x3b0
[    9.861254]  kthread+0xde/0x110
[    9.864414]  ? kthread_complete_and_exit+0x20/0x20
[    9.869210]  ret_from_fork+0x22/0x30
[    9.872792]  </TASK>
[    9.874985] ---[ end trace 0000000000000000 ]---

Fixes: 5c1733e33c88 ("ALSA: memalloc: Align buffer allocations in page size")
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329032808.170403-1-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: ymfpci: Create card with device-managed snd_devm_card_new()

[ Upstream commit f33fc1576757741479452255132d6e3aaf558ffe ]

snd_card_ymfpci_remove() was removed in commit c6e6bb5eab74 ("ALSA:
ymfpci: Allocate resources with device-managed APIs"), but the call to
snd_card_new() was not replaced with snd_devm_card_new().

Since there was no longer a call to snd_card_free, unloading the module
would eventually result in Oops:

[697561.532887] BUG: unable to handle page fault for address: ffffffffc0924480
[697561.532893] #PF: supervisor read access in kernel mode
[697561.532896] #PF: error_code(0x0000) - not-present page
[697561.532899] PGD ae1e15067 P4D ae1e15067 PUD ae1e17067 PMD 11a8f5067 PTE 0
[697561.532905] Oops: 0000 [#1] PREEMPT SMP NOPTI
[697561.532909] CPU: 21 PID: 5080 Comm: wireplumber Tainted: G        W  OE      6.2.7 #1
[697561.532914] Hardware name: System manufacturer System Product Name/TUF GAMING X570-PLUS, BIOS 4408 10/28/2022
[697561.532916] RIP: 0010:try_module_get.part.0+0x1a/0xe0
[697561.532924] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 49 89 fc bf 01 00 00 00 e8 56 3c f8 ff <41> 83 3c 24 02 0f 84 96 00 00 00 41 8b 84 24 30 03 00 00 85 c0 0f
[697561.532927] RSP: 0018:ffffbe9b858c3bd8 EFLAGS: 00010246
[697561.532930] RAX: ffff9815d14f1900 RBX: ffff9815c14e6000 RCX: 0000000000000000
[697561.532933] RDX: 0000000000000000 RSI: ffffffffc055092c RDI: ffffffffb3778c1a
[697561.532935] RBP: ffffbe9b858c3be8 R08: 0000000000000040 R09: ffff981a1a741380
[697561.532937] R10: ffffbe9b858c3c80 R11: 00000009d56533a6 R12: ffffffffc0924480
[697561.532939] R13: ffff9823439d8500 R14: 0000000000000025 R15: ffff9815cd109f80
[697561.532942] FS:  00007f13084f1f80(0000) GS:ffff9824aef40000(0000) knlGS:0000000000000000
[697561.532945] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[697561.532947] CR2: ffffffffc0924480 CR3: 0000000145344000 CR4: 0000000000350ee0
[697561.532949] Call Trace:
[697561.532951]  <TASK>
[697561.532955]  try_module_get+0x13/0x30
[697561.532960]  snd_ctl_open+0x61/0x1c0 [snd]
[697561.532976]  snd_open+0xb4/0x1e0 [snd]
[697561.532989]  chrdev_open+0xc7/0x240
[697561.532995]  ? fsnotify_perm.part.0+0x6e/0x160
[697561.533000]  ? __pfx_chrdev_open+0x10/0x10
[697561.533005]  do_dentry_open+0x169/0x440
[697561.533009]  vfs_open+0x2d/0x40
[697561.533012]  path_openat+0xa9d/0x10d0
[697561.533017]  ? debug_smp_processor_id+0x17/0x20
[697561.533022]  ? trigger_load_balance+0x65/0x370
[697561.533026]  do_filp_open+0xb2/0x160
[697561.533032]  ? _raw_spin_unlock+0x19/0x40
[697561.533036]  ? alloc_fd+0xa9/0x190
[697561.533040]  do_sys_openat2+0x9f/0x160
[697561.533044]  __x64_sys_openat+0x55/0x90
[697561.533048]  do_syscall_64+0x3b/0x90
[697561.533052]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[697561.533056] RIP: 0033:0x7f1308a40db4
[697561.533059] Code: 24 20 eb 8f 66 90 44 89 54 24 0c e8 46 68 f8 ff 44 8b 54 24 0c 44 89 e2 48 89 ee 41 89 c0 bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 77 32 44 89 c7 89 44 24 0c e8 78 68 f8 ff 8b 44
[697561.533062] RSP: 002b:00007ffcce664450 EFLAGS: 00000293 ORIG_RAX: 0000000000000101
[697561.533066] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1308a40db4
[697561.533068] RDX: 0000000000080000 RSI: 00007ffcce664690 RDI: 00000000ffffff9c
[697561.533070] RBP: 00007ffcce664690 R08: 0000000000000000 R09: 0000000000000012
[697561.533072] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000080000
[697561.533074] R13: 00007f13054b069b R14: 0000565209f83200 R15: 0000000000000000
[697561.533078]  </TASK>

Fixes: c6e6bb5eab74 ("ALSA: ymfpci: Allocate resources with device-managed APIs")
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329032422.170024-1-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: fix invalid check for empty list in ice_sched_assoc_vsi_to_agg()

[ Upstream commit e9a1cc2e4c4ee7c7e60fb26345618c2522a2a10f ]

The code implicitly assumes that the list iterator finds a correct
handle. If 'vsi_handle' is not found the 'old_agg_vsi_info' was
pointing to an bogus memory location. For safety a separate list
iterator variable should be used to make the != NULL check on
'old_agg_vsi_info' correct under any circumstances.

Additionally Linus proposed to avoid any use of the list iterator
variable after the loop, in the attempt to move the list iterator
variable declaration into the macro to avoid any potential misuse after
the loop. Using it in a pointer comparison after the loop is undefined
behavior and should be omitted if possible [1].

Fixes: 37c592062b16 ("ice: remove the VSI info from previous agg")
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jkl820.git@gmail.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: add profile conflict check for AVF FDIR

[ Upstream commit 29486b6df3e6a63b57d1ed1dce06051267282ff4 ]

Add profile conflict check while adding some FDIR rules to avoid
unexpected flow behavior, rules may have conflict including:
        IPv4 <---> {IPv4_UDP, IPv4_TCP, IPv4_SCTP}
        IPv6 <---> {IPv6_UDP, IPv6_TCP, IPv6_SCTP}

For example, when we create an FDIR rule for IPv4, this rule will work
on packets including IPv4, IPv4_UDP, IPv4_TCP and IPv4_SCTP. But if we
then create an FDIR rule for IPv4_UDP and then destroy it, the first
FDIR rule for IPv4 cannot work on pkt IPv4_UDP then.

To prevent this unexpected behavior, we add restriction in software
when creating FDIR rules by adding necessary profile conflict check.

Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF")
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Fix ice_cfg_rdma_fltr() to only update relevant fields

[ Upstream commit d94dbdc4e0209b5e7d736ab696f8d635b034e3ee ]

The current implementation causes ice_vsi_update() to update all VSI
fields based on the cached VSI context. This also assumes that the
ICE_AQ_VSI_PROP_Q_OPT_VALID bit is set. This can cause problems if the
VSI context is not correctly synced by the driver. Fix this by only
updating the fields that correspond to ICE_AQ_VSI_PROP_Q_OPT_VALID.
Also, make sure to save the updated result in the cached VSI context
on success.

Fixes: 348048e724a0 ("ice: Implement iidc operations")
Co-developed-by: Robert Malz <robertx.malz@intel.com>
Signed-off-by: Robert Malz <robertx.malz@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Tested-by: Jakub Andrysiak <jakub.andrysiak@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smsc911x: avoid PHY being resumed when interface is not up

[ Upstream commit f22c993f31fa9615df46e49cd768b713d39a852f ]

SMSC911x doesn't need mdiobus suspend/resume, that's why it sets
'mac_managed_pm'. However, setting it needs to be moved from init to
probe, so mdiobus PM functions will really never be called (e.g. when
the interface is not up yet during suspend/resume).

Fixes: 3ce9f2bef755 ("net: smsc911x: Stop and start PHY during suspend and resume")
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230327083138.6044-1-wsa+renesas@sang-engineering.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mvpp2: parser fix PPPoE

[ Upstream commit 031a416c2170866be5132ae42e14453d669b0cb1 ]

In PPPoE add all IPv4 header option length to the parser
and adjust the L3 and L4 offset accordingly.
Currently the L4 match does not work with PPPoE and
all packets are matched as L3 IP4 OPT.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mvpp2: parser fix QinQ

[ Upstream commit a587a84813b90372cb0a7565e201a4075da67919 ]

The mvpp2 parser entry for QinQ has the inner and outer VLAN
in the wrong order.
Fix the problem by swapping them.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mvpp2: classifier flow fix fragmentation flags

[ Upstream commit 9a251cae51d57289908222e6c322ca61fccc25fd ]

Add missing IP Fragmentation Flag.

Fixes: f9358e12a0af ("net: mvpp2: split ingress traffic into multiple flows")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

loop: LOOP_CONFIGURE: send uevents for partitions

[ Upstream commit bb430b69422640891b0b8db762885730579a4145 ]

LOOP_CONFIGURE is, as far as I understand it, supposed to be a way to
combine LOOP_SET_FD and LOOP_SET_STATUS64 into a single syscall.  When
using LOOP_SET_FD+LOOP_SET_STATUS64, a single uevent would be sent for
each partition found on the loop device after the second ioctl(), but
when using LOOP_CONFIGURE, no such uevent was being sent.

In the old setup, uevents are disabled for LOOP_SET_FD, but not for
LOOP_SET_STATUS64.  This makes sense, as it prevents uevents being
sent for a partially configured device during LOOP_SET_FD - they're
only sent at the end of LOOP_SET_STATUS64.  But for LOOP_CONFIGURE,
uevents were disabled for the entire operation, so that final
notification was never issued.  To fix this, reduce the critical
section to exclude the loop_reread_partitions() call, which causes
the uevents to be issued, to after uevents are re-enabled, matching
the behaviour of the LOOP_SET_FD+LOOP_SET_STATUS64 combination.

I noticed this because Busybox's losetup program recently changed from
using LOOP_SET_FD+LOOP_SET_STATUS64 to LOOP_CONFIGURE, and this broke
my setup, for which I want a notification from the kernel any time a
new partition becomes available.

Signed-off-by: Alyssa Ross <hi@alyssa.is>
[hch: reduced the critical section]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: 3448914e8cc5 ("loop: Add LOOP_CONFIGURE ioctl")
Link: https://lore.kernel.org/r/20230320125430.55367-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: bus: Rework system-level device notification handling

[ Upstream commit c56610a869bce03490faf4f157076370c71b8ae3 ]

For ACPI drivers that provide a ->notify() callback and set
ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be
invoked while either the ->add() or the ->remove() callback is running
without any synchronization at the bus type level which is counter to
the common-sense expectation that notification handling should only be
enabled when the driver is actually bound to the device.  As a result,
if the driver is not careful enough, it's ->notify() callback may crash
when it is invoked too early or too late [1].

This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop
driver member of struct acpi_device") that made acpi_bus_notify() check
for the presence of the driver and its ->notify() callback directly
instead of using an extra driver pointer that was only set and cleared
by the bus type code, but it was present before that commit although
it was harder to reproduce then.

It can be addressed by using the observation that
acpi_device_install_notify_handler() can be modified to install the
handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is
set in the driver flags, in which case acpi_bus_notify() will not need
to invoke the driver's ->notify() callback any more and that callback
will only be invoked after acpi_device_install_notify_handler() has run
and before acpi_device_remove_notify_handler() runs, which implies the
correct ordering with respect to the other ACPI driver callbacks.

Modify the code accordingly and while at it, drop two redundant local
variables from acpi_bus_notify() and turn its description comment into
a proper kerneldoc one.

Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device")
Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com
Reported-by: Pierre Asselin <pa@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Pierre Asselin <pa@panix.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/vfio-ap: fix memory leak in vfio_ap device driver

[ Upstream commit 8f8cf767589f2131ae5d40f3758429095c701c84 ]

The device release callback function invoked to release the matrix device
uses the dev_get_drvdata(device *dev) function to retrieve the
pointer to the vfio_matrix_dev object in order to free its storage. The
problem is, this object is not stored as drvdata with the device; since the
kfree function will accept a NULL pointer, the memory for the
vfio_matrix_dev object is never freed.

Since the device being released is contained within the vfio_matrix_dev
object, the container_of macro will be used to retrieve its pointer.

Fixes: 1fde573413b5 ("s390: vfio-ap: base implementation of VFIO AP device driver")
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20230320150447.34557-1-akrowiak@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_write

[ Upstream commit 2b4c99f7d9a57ecd644eda9b1fb0a1072414959f ]

Syzkaller reported the following issue:

=====================================================
BUG: KMSAN: uninit-value in aio_rw_done fs/aio.c:1520 [inline]
BUG: KMSAN: uninit-value in aio_write+0x899/0x950 fs/aio.c:1600
 aio_rw_done fs/aio.c:1520 [inline]
 aio_write+0x899/0x950 fs/aio.c:1600
 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019
 __do_sys_io_submit fs/aio.c:2078 [inline]
 __se_sys_io_submit+0x293/0x770 fs/aio.c:2048
 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:766 [inline]
 slab_alloc_node mm/slub.c:3452 [inline]
 __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491
 __do_kmalloc_node mm/slab_common.c:967 [inline]
 __kmalloc+0x11d/0x3b0 mm/slab_common.c:981
 kmalloc_array include/linux/slab.h:636 [inline]
 bcm_tx_setup+0x80e/0x29d0 net/can/bcm.c:930
 bcm_sendmsg+0x3a2/0xce0 net/can/bcm.c:1351
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg net/socket.c:734 [inline]
 sock_write_iter+0x495/0x5e0 net/socket.c:1108
 call_write_iter include/linux/fs.h:2189 [inline]
 aio_write+0x63a/0x950 fs/aio.c:1600
 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019
 __do_sys_io_submit fs/aio.c:2078 [inline]
 __se_sys_io_submit+0x293/0x770 fs/aio.c:2048
 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

CPU: 1 PID: 5034 Comm: syz-executor350 Not tainted 6.2.0-rc6-syzkaller-80422-geda666ff2276 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
=====================================================

We can follow the call chain and find that 'bcm_tx_setup' function
calls 'memcpy_from_msg' to copy some content to the newly allocated
frame of 'op->frames'. After that the 'len' field of copied structure
being compared with some constant value (64 or 8). However, if
'memcpy_from_msg' returns an error, we will compare some uninitialized
memory. This triggers 'uninit-value' issue.

This patch will add 'memcpy_from_msg' possible errors processing to
avoid uninit-value issue.

Tested via syzkaller

Reported-by: syzbot+c9bfd85eca611ebf5db1@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=47f897f8ad958bbde5790ebf389b5e7e0a345089
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Fixes: 6f3b911d5f29b ("can: bcm: add support for CAN FD frames")
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230314120445.12407-1-ivan.orlov0322@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86/intel/pmc: Alder Lake PCH slp_s0_residency fix

[ Upstream commit fb5755100a0a5aa5957bdb204fd1e249684557fc ]

For platforms with Alder Lake PCH (Alder Lake S and Raptor Lake S) the
slp_s0_residency attribute has been reporting the wrong value. Unlike other
platforms, ADL PCH does not have a counter for the time that the SLP_S0
signal was asserted. Instead, firmware uses the aggregate of the Low Power
Mode (LPM) substate counters as the S0ix value.  Since the LPM counters run
at a different frequency, this lead to misreporting of the S0ix time.

Add a check for Alder Lake PCH and adjust the frequency accordingly when
display slp_s0_residency.

Fixes: bbab31101f44 ("platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver")
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230320212029.3154407-1-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/tc: Fix the ICL PHY ownership check in TC-cold state

[ Upstream commit 38c583019484f190d5b33f59b8ae810e6b1763c6 ]

The commit renaming icl_tc_phy_is_in_safe_mode() to
icl_tc_phy_take_ownership() didn't flip the function's return value
accordingly, fix this up.

This didn't cause an actual problem besides state check errors, since
the function is only used during HW readout.

Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: f53979d68a77 ("drm/i915/display/tc: Rename safe_mode functions ownership")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-4-imre.deak@intel.com
(cherry picked from commit f2c7959dda614d9b7c6a41510492de39d31705ec)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: don't reject VLANs when IFF_PROMISC is set

[ Upstream commit a7602e7332b97cfbec7bacb0f1ade99a575fe104 ]

The blamed commit has introduced the following tests to
dwmac4_add_hw_vlan_rx_fltr(), called from stmmac_vlan_rx_add_vid():

if (hw->promisc) {
netdev_err(dev,
   "Adding VLAN in promisc mode not supported\n");
return -EPERM;
}

"VLAN promiscuous" mode is keyed in this driver to IFF_PROMISC, and so,
vlan_vid_add() and vlan_vid_del() calls cannot take place in IFF_PROMISC
mode. I have the following 2 arguments that this restriction is.... hm,
how shall I put it nicely... unproductive :)

First, take the case of a Linux bridge. If the kernel is compiled with
CONFIG_BRIDGE_VLAN_FILTERING=y, then this bridge shall have a VLAN
database. The bridge shall try to call vlan_add_vid() on its bridge
ports for each VLAN in the VLAN table. It will do this irrespectively of
whether that port is *currently* VLAN-aware or not. So it will do this
even when the bridge was created with vlan_filtering 0.
But the Linux bridge, in VLAN-unaware mode, configures its ports in
promiscuous (IFF_PROMISC) mode, so that they accept packets with any
MAC DA (a switch must do this in order to forward those packets which
are not directly targeted to its MAC address).

As a result, the stmmac driver does not work as a bridge port, when the
kernel is compiled with CONFIG_BRIDGE_VLAN_FILTERING=y.

$ ip link add br0 type bridge && ip link set br0 up
$ ip link set eth0 master br0 && ip link set eth0 up
[ 2333.943296] br0: port 1(eth0) entered blocking state
[ 2333.943381] br0: port 1(eth0) entered disabled state
[ 2333.943782] device eth0 entered promiscuous mode
[ 2333.944080] 4033c000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 2333.976509] 4033c000.ethernet eth0: failed to initialize vlan filtering on this port
RTNETLINK answers: Operation not permitted

Secondly, take the case of stmmac as DSA master. Some switch tagging
protocols are based on 802.1Q VLANs (tag_sja1105.c), and as such,
tag_8021q.c uses vlan_vid_add() to work with VLAN-filtering DSA masters.
But also, when a DSA port becomes promiscuous (for example when it joins
a bridge), the DSA framework also makes the DSA master promiscuous.

Moreover, for every VLAN that a DSA switch sends to the CPU, DSA also
programs a VLAN filter on the DSA master, because if the the DSA switch
uses a tail tag, then the hardware frame parser of the DSA master will
see VLAN as VLAN, and might filter them out, for being unknown.

Due to the above 2 reasons, my belief is that the stmmac driver does not
get to choose to not accept vlan_vid_add() calls while IFF_PROMISC is
enabled, because the 2 are completely independent and there are code
paths in the network stack which directly lead to this situation
occurring, without the user's direct input.

In fact, my belief is that "VLAN promiscuous" mode should have never
been keyed on IFF_PROMISC in the first place, but rather, on the
NETIF_F_HW_VLAN_CTAG_FILTER feature flag which can be toggled by the
user through ethtool -k, when present in netdev->hw_features.

In the stmmac driver, NETIF_F_HW_VLAN_CTAG_FILTER is only present in
"features", making this feature "on [fixed]".

I have this belief because I am unaware of any definition of promiscuity
which implies having an effect on anything other than MAC DA (therefore
not VLAN). However, I seem to be rather alone in having this opinion,
looking back at the disagreements from this discussion:
https://lore.kernel.org/netdev/20201110153958.ci5ekor3o2ekg3ky@ipetronik.com/

In any case, to remove the vlan_vid_add() dependency on !IFF_PROMISC,
one would need to remove the check and see what fails. I guess the test
was there because of the way in which dwmac4_vlan_promisc_enable() is
implemented.

For context, the dwmac4 supports Perfect Filtering for a limited number
of VLANs - dwmac4_get_num_vlan(), priv->hw->num_vlan, with a fallback on
Hash Filtering - priv->dma_cap.vlhash - see stmmac_vlan_update(), also
visible in cat /sys/kernel/debug/stmmaceth/eth0/dma_cap | grep 'VLAN
Hash Filtering'.

The perfect filtering is based on MAC_VLAN_Tag_Filter/MAC_VLAN_Tag_Data
registers, accessed in the driver through dwmac4_write_vlan_filter().

The hash filtering is based on the MAC_VLAN_Hash_Table register, named
GMAC_VLAN_HASH_TABLE in the driver and accessed by dwmac4_update_vlan_hash().
The control bit for enabling hash filtering is GMAC_VLAN_VTHM
(MAC_VLAN_Tag_Ctrl bit VTHM: VLAN Tag Hash Table Match Enable).

Now, the description of dwmac4_vlan_promisc_enable() is that it iterates
through the driver's cache of perfect filter entries (hw->vlan_filter[i],
added by dwmac4_add_hw_vlan_rx_fltr()), and evicts them from hardware by
unsetting their GMAC_VLAN_TAG_DATA_VEN (MAC_VLAN_Tag_Data bit VEN - VLAN
Tag Enable) bit. Then it unsets the GMAC_VLAN_VTHM bit, which disables
hash matching.

This leaves the MAC, according to table "VLAN Match Status" from the
documentation, to always enter these data paths:

VID    |VLAN Perfect Filter |VTHM Bit |VLAN Hash Filter |Final VLAN Match
       |Match Result        |         |Match Result     |Status
-------|--------------------|---------|-----------------|----------------
VID!=0 |Fail                |0        |don't care       |Pass

So, dwmac4_vlan_promisc_enable() does its job, but by unsetting
GMAC_VLAN_VTHM, it conflicts with the other code path which controls
this bit: dwmac4_update_vlan_hash(), called through stmmac_update_vlan_hash()
from stmmac_vlan_rx_add_vid() and from stmmac_vlan_rx_kill_vid().
This is, I guess, why dwmac4_add_hw_vlan_rx_fltr() is not allowed to run
after dwmac4_vlan_promisc_enable() has unset GMAC_VLAN_VTHM: because if
it did, then dwmac4_update_vlan_hash() would set GMAC_VLAN_VTHM again,
breaking the "VLAN promiscuity".

It turns out that dwmac4_vlan_promisc_enable() is way too complicated
for what needs to be done. The MAC_Packet_Filter register also has the
VTFE bit (VLAN Tag Filter Enable), which simply controls whether VLAN
tagged packets which don't match the filtering tables (either perfect or
hash) are dropped or not. At the moment, this driver unconditionally
sets GMAC_PACKET_FILTER_VTFE if NETIF_F_HW_VLAN_CTAG_FILTER was detected
through the priv->dma_cap.vlhash capability bits of the device, in
stmmac_dvr_probe().

I would suggest deleting the unnecessarily complex logic from
dwmac4_vlan_promisc_enable(), and simply unsetting GMAC_PACKET_FILTER_VTFE
when becoming IFF_PROMISC, which has the same effect of allowing packets
with any VLAN tags, but has the additional benefit of being able to run
concurrently with stmmac_vlan_rx_add_vid() and stmmac_vlan_rx_kill_vid().

As much as I believe that the VTFE bit should have been exclusively
controlled by NETIF_F_HW_VLAN_CTAG_FILTER through ethtool, and not by
IFF_PROMISC, changing that is not a punctual fix to the problem, and it
would probably break the VFFQ feature added by the later commit
e0f9956a3862 ("net: stmmac: Add option for VLAN filter fail queue
enable"). From the commit description, VFFQ needs IFF_PROMISC=on and
VTFE=off in order to work (and this change respects that). But if VTFE
was changed to be controlled through ethtool -k, then a user-visible
change would have been introduced in Intel's scripts (a need to run
"ethtool -k eth0 rx-vlan-filter off" which did not exist before).

The patch was tested with this set of commands:

  ip link set eth0 up
  ip link add link eth0 name eth0.100 type vlan id 100
  ip addr add 192.168.100.2/24 dev eth0.100 && ip link set eth0.100 up
  ip link set eth0 promisc on
  ip link add link eth0 name eth0.101 type vlan id 101
  ip addr add 192.168.101.2/24 dev eth0.101 && ip link set eth0.101 up
  ip link set eth0 promisc off
  ping -c 5 192.168.100.1
  ping -c 5 192.168.101.1
  ip link set eth0 promisc on
  ping -c 5 192.168.100.1
  ping -c 5 192.168.101.1
  ip link del eth0.100
  ip link del eth0.101
  # Wait for VLAN-tagged pings from the other end...
  # Check with "tcpdump -i eth0 -e -n -p" and we should see them
  ip link set eth0 promisc off
  # Wait for VLAN-tagged pings from the other end...
  # Check with "tcpdump -i eth0 -e -n -p" and we shouldn't see them
  # anymore, but remove the "-p" argument from tcpdump and they're there.

Fixes: c89f44ff10fd ("net: stmmac: Add support for VLAN promiscuous mode")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/net_failover: fix txq exceeding warning

[ Upstream commit e3cbdcb0fbb61045ef3ce0e072927cc41737f787 ]

The failover txq is inited as 16 queues.
when a packet is transmitted from the failover device firstly,
the failover device will select the queue which is returned from
the primary device if the primary device is UP and running.
If the primary device txq is bigger than the default 16,
it can lead to the following warning:
eth0 selects TX queue 18, but real number of TX queues is 16

The warning backtrace is:
[   32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G            E      6.2.8-1.el7.centos.x86_64 #1
[   32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014
[   32.147730] Call Trace:
[   32.147971]  <TASK>
[   32.148183]  dump_stack_lvl+0x48/0x70
[   32.148514]  dump_stack+0x10/0x20
[   32.148820]  netdev_core_pick_tx+0xb1/0xe0
[   32.149180]  __dev_queue_xmit+0x529/0xcf0
[   32.149533]  ? __check_object_size.part.0+0x21c/0x2c0
[   32.149967]  ip_finish_output2+0x278/0x560
[   32.150327]  __ip_finish_output+0x1fe/0x2f0
[   32.150690]  ip_finish_output+0x2a/0xd0
[   32.151032]  ip_output+0x7a/0x110
[   32.151337]  ? __pfx_ip_finish_output+0x10/0x10
[   32.151733]  ip_local_out+0x5e/0x70
[   32.152054]  ip_send_skb+0x19/0x50
[   32.152366]  udp_send_skb.isra.0+0x163/0x3a0
[   32.152736]  udp_sendmsg+0xba8/0xec0
[   32.153060]  ? __folio_memcg_unlock+0x25/0x60
[   32.153445]  ? __pfx_ip_generic_getfrag+0x10/0x10
[   32.153854]  ? sock_has_perm+0x85/0xa0
[   32.154190]  inet_sendmsg+0x6d/0x80
[   32.154508]  ? inet_sendmsg+0x6d/0x80
[   32.154838]  sock_sendmsg+0x62/0x70
[   32.155152]  ____sys_sendmsg+0x134/0x290
[   32.155499]  ___sys_sendmsg+0x81/0xc0
[   32.155828]  ? _get_random_bytes.part.0+0x79/0x1a0
[   32.156240]  ? ip4_datagram_release_cb+0x5f/0x1e0
[   32.156649]  ? get_random_u16+0x69/0xf0
[   32.156989]  ? __fget_light+0xcf/0x110
[   32.157326]  __sys_sendmmsg+0xc4/0x210
[   32.157657]  ? __sys_connect+0xb7/0xe0
[   32.157995]  ? __audit_syscall_entry+0xce/0x140
[   32.158388]  ? syscall_trace_enter.isra.0+0x12c/0x1a0
[   32.158820]  __x64_sys_sendmmsg+0x24/0x30
[   32.159171]  do_syscall_64+0x38/0x90
[   32.159493]  entry_SYSCALL_64_after_hwframe+0x72/0xdc

Fix that by reducing txq number as the non-existent primary-dev does.

Fixes: cfc80d9a1163 ("net: Introduce net_failover driver")
Signed-off-by: Faicker Mo <faicker.mo@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: Handle deferred clk

[ Upstream commit 02bcba0b9f9da706d5bd1e8cbeb83493863e17b5 ]

devm_clk_get() can return -EPROBE_DEFER. So it is better to return the
error code from devm_clk_get(), instead of a hard coded -ENOENT.

This gives more opportunities to successfully probe the driver.

Fixes: 8959e5324485 ("regulator: fixed: add possibility to enable by clock")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/18459fae3d017a66313699c7c8456b28158b2dd0.1679819354.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8169: fix RTL8168H and RTL8107E rx crc error

[ Upstream commit 33189f0a94b9639c058781fcf82e4ea3803b1682 ]

When link speed is 10 Mbps and temperature is under -20°C, RTL8168H and
RTL8107E may have rx crc error. Disable phy 10 Mbps pll off to fix this
issue.

Fixes: 6e1d0b898818 ("r8169:add support for RTL8168H and RTL8107E")
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: microchip: ksz8: fix MDB configuration with non-zero VID

[ Upstream commit 9aa5757e1f71d85facdc3c98028762cbab8d15c7 ]

FID is directly mapped to VID. However, configuring a MAC address with a
VID != 0 resulted in incorrect configuration due to an incorrect bit
mask. This kernel commit fixed the issue by correcting the bit mask and
ensuring proper configuration of MAC addresses with non-zero VID.

Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: microchip: ksz8863_smi: fix bulk access

[ Upstream commit 392ff7a84cbca34118ca286dfbfe8aee24605897 ]

Current regmap bulk access is broken, resulting to wrong reads/writes
if ksz_read64/ksz_write64 functions are used.
Mostly this issue was visible by using ksz8_fdb_dump(), which returned
corrupt MAC address.

The reason is that regmap was configured to have max_raw_read/write,
even if ksz8863_mdio_read/write functions are able to handle unlimited
read/write accesses. On ksz_read64 function we are using multiple 32bit
accesses by incrementing each access by 1 instead of 4. Resulting buffer
had 01234567.12345678 instead of 01234567.89abcdef.

We have multiple ways to fix it:
- enable 4 byte alignment for 32bit accesses. Since the HW do not have
  this requirement. It will break driver.
- disable max_raw_* limit.

This patch is removing max_raw_* limit for regmap accesses in ksz8863_smi.

Fixes: 60a364760002 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: microchip: ksz8: ksz8_fdb_dump: avoid extracting ghost entry from empty dynamic MAC table.

[ Upstream commit 492606cdc74804d372ab1bdb8f3ef4a6fb6f9f59 ]

If the dynamic MAC table is empty, we will still extract one outdated
entry. Fix it by using correct bit offset.

Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: microchip: ksz8: fix offset for the timestamp filed

[ Upstream commit b3177aab89be540dc50d2328427b073361093e38 ]

We are using wrong offset, so we will get not a timestamp.

Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: microchip: ksz8: fix ksz8_fdb_dump() to extract all 1024 entries

[ Upstream commit 5d90492dd4ff50ad65c582c76c345d0b90001728 ]

Current ksz8_fdb_dump() is able to extract only max 249 entries on
the ksz8863/ksz8873 series of switches. This happened due to wrong
bit mask and offset calculation.

This commit corrects the issue and allows for the complete extraction of
all 1024 entries.

Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: microchip: ksz8: fix ksz8_fdb_dump()

[ Upstream commit 88e943e83827a349f70c3464b3eba7260be7461d ]

Before this patch, the ksz8_fdb_dump() function had several issues, such
as uninitialized variables and incorrect usage of source port as a bit
mask. These problems caused inaccurate reporting of vid information and
port assignment in the bridge fdb.

Fixes: e587be759e6e ("net: dsa: microchip: update fdb add/del/dump in ksz_common")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ptp_qoriq: fix memory leak in probe()

[ Upstream commit f33642224e38d7e0d59336e10e7b4e370b1c4506 ]

Smatch complains that:
drivers/ptp/ptp_qoriq.c ptp_qoriq_probe()
warn: 'base' from ioremap() not released.

Fix this by revising the parameter from 'ptp_qoriq->base' to 'base'.
This is only a bug if ptp_qoriq_init() returns on the
first -ENODEV error path.
For other error paths ptp_qoriq->base and base are the same.
And this change makes the code more readable.

Fixes: 7f4399ba405b ("ptp_qoriq: fix NULL access if ptp dt node missing")
Signed-off-by: SongJingyi <u201912584@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230324031406.1895159-1-u201912584@hust.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: realtek: fix out-of-bounds access

[ Upstream commit b93eb564869321d0dffaf23fcc5c88112ed62466 ]

The probe function sets priv->chip_data to (void *)priv + sizeof(*priv)
with the expectation that priv has enough trailing space.

However, only realtek-smi actually allocated this chip_data space.
Do likewise in realtek-mdio to fix out-of-bounds accesses.

These accesses likely went unnoticed so far, because of an (unused)
buf[4096] member in struct realtek_priv, which caused kmalloc to
round up the allocated buffer to a big enough size, so nothing of
value was overwritten. With a different allocator (like in the barebox
bootloader port of the driver) or with KASAN, the memory corruption
becomes quickly apparent.

Fixes: aac94001067d ("net: dsa: realtek: add new mdio interface for drivers")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20230323103735.2331786-1-a.fatoum@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpt3sas: Don't print sense pool info twice

[ Upstream commit d684a7a26f7d2c7122a4581ac966ed64e88fb29c ]

_base_allocate_sense_dma_pool() already prints out the sense pool
information, so don't print it a second time after calling it in
_base_allocate_memory_pools(). In addition the version in
_base_allocate_memory_pools() was using the wrong size value, sz, which was
last assigned when doing some nvme calculations instead of sense_sz to
determine the pool size in kilobytes.

Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Fixes: 970ac2bb70e7 ("scsi: mpt3sas: Force sense buffer allocations to be within same 4 GB region")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230324193204.567932-1-jsnitsel@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: megaraid_sas: Fix crash after a double completion

[ Upstream commit 2309df27111a51734cb9240b4d3c25f2f3c6ab06 ]

When a physical disk is attached directly "without JBOD MAP support" (see
megasas_get_tm_devhandle()) then there is no real error handling in the
driver.  Return FAILED instead of SUCCESS.

Fixes: 18365b138508 ("megaraid_sas: Task management support")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20230324150134.14696-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: ef10: don't overwrite offload features at NIC reset

[ Upstream commit ca4a80e4bb7e87daf33b27d2ab9e4f5311018a89 ]

At NIC reset, some offload features related to encapsulated traffic
might have changed (this mainly happens if the firmware-variant is
changed with the sfboot userspace tool). Because of this, features are
checked and set again at reset time.

However, this was not done right, and some features were improperly
overwritten at NIC reset:
- Tunneled IPv6 segmentation was always disabled
- Features disabled with ethtool were reenabled
- Features that becomes unsupported after the reset were not disabled

Also, checking if the device supports IPV6_CSUM to enable TSO6 is no
longer necessary because all currently supported devices support it.
Additionally, move the assignment of some other features to the
EF10_OFFLOAD_FEATURES macro, like it is done in ef100, leaving the
selection of features in efx_pci_probe_post_io a bit cleaner.

Fixes: ffffd2454a7a ("sfc: correctly advertise tunneled IPv6 segmentation")
Fixes: 24b2c3751aa3 ("sfc: advertise encapsulated offloads on EF10")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Suggested-by: Jonathan Cooper <jonathan.s.cooper@amd.com>
Tested-by: Jonathan Cooper <jonathan.s.cooper@amd.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230323083417.7345-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: fix shutdown of NFS TCP client socket

[ Upstream commit 943d045a6d796175e5d08f9973953b1d2c07d797 ]

NFS server Duplicate Request Cache (DRC) algorithms rely on NFS clients
reconnecting using the same local TCP port. Unique NFS operations are
identified by the per-TCP connection set of XIDs. This prevents file
corruption when non-idempotent NFS operations are retried.

Currently, NFS client TCP connections are using different local TCP ports
when reconnecting to NFS servers.

After an NFS server initiates shutdown of the TCP connection, the NFS
client's TCP socket is set to NULL after the socket state has reached
TCP_LAST_ACK(9). When reconnecting, the new socket attempts to reuse
the same local port but fails with EADDRNOTAVAIL (99). This forces the
socket to use a different local TCP port to reconnect to the remote NFS
server.

State Transition and Events:
TCP_CLOSE_WAIT(8)
TCP_LAST_ACK(9)
connect(fail EADDRNOTAVAIL(99))
TCP_CLOSE(7)
bind on new port
connect success

dmesg excerpts showing reconnect switching from TCP local port of 926 to
763 after commit 7c81e6a9d75b:
[13354.947854] NFS call  mkdir testW
...
[13405.654781] RPC:       xs_tcp_state_change client 00000000037d0f03...
[13405.654813] RPC:       state 8 conn 1 dead 0 zapped 1 sk_shutdown 1
[13405.654826] RPC:       xs_data_ready...
[13405.654892] RPC:       xs_tcp_state_change client 00000000037d0f03...
[13405.654895] RPC:       state 9 conn 0 dead 0 zapped 1 sk_shutdown 3
[13405.654899] RPC:       xs_tcp_state_change client 00000000037d0f03...
[13405.654900] RPC:       state 9 conn 0 dead 0 zapped 1 sk_shutdown 3
[13405.654950] RPC:       xs_connect scheduled xprt 00000000037d0f03
[13405.654975] RPC:       xs_bind 0.0.0.0:926: ok (0)
[13405.654980] RPC:       worker connecting xprt 00000000037d0f03 via tcp
  to 10.101.6.228 (port 2049)
[13405.654991] RPC:       00000000037d0f03 connect status 99 connected 0
  sock state 7
[13405.655001] RPC:       xs_tcp_state_change client 00000000037d0f03...
[13405.655002] RPC:       state 7 conn 0 dead 0 zapped 1 sk_shutdown 3
[13405.655024] RPC:       xs_connect scheduled xprt 00000000037d0f03
[13405.655038] RPC:       xs_bind 0.0.0.0:763: ok (0)
[13405.655041] RPC:       worker connecting xprt 00000000037d0f03 via tcp
  to 10.101.6.228 (port 2049)
[13405.655065] RPC:       00000000037d0f03 connect status 115 connected 0
  sock state 2

State Transition and Events with patch applied:
TCP_CLOSE_WAIT(8)
TCP_LAST_ACK(9)
TCP_CLOSE(7)
connect(reuse of port succeeds)

dmesg excerpts showing reconnect on same TCP local port of 936 with patch
applied:
[  257.139935] NFS: mkdir(0:59/560857152), testQ
[  257.139937] NFS call  mkdir testQ
...
[  307.822702] RPC:       state 8 conn 1 dead 0 zapped 1 sk_shutdown 1
[  307.822714] RPC:       xs_data_ready...
[  307.822817] RPC:       xs_tcp_state_change client 00000000ce702f14...
[  307.822821] RPC:       state 9 conn 0 dead 0 zapped 1 sk_shutdown 3
[  307.822825] RPC:       xs_tcp_state_change client 00000000ce702f14...
[  307.822826] RPC:       state 9 conn 0 dead 0 zapped 1 sk_shutdown 3
[  307.823606] RPC:       xs_tcp_state_change client 00000000ce702f14...
[  307.823609] RPC:       state 7 conn 0 dead 0 zapped 1 sk_shutdown 3
[  307.823629] RPC:       xs_tcp_state_change client 00000000ce702f14...
[  307.823632] RPC:       state 7 conn 0 dead 0 zapped 1 sk_shutdown 3
[  307.823676] RPC:       xs_connect scheduled xprt 00000000ce702f14
[  307.823704] RPC:       xs_bind 0.0.0.0:936: ok (0)
[  307.823709] RPC:       worker connecting xprt 00000000ce702f14 via tcp
  to 10.101.1.30 (port 2049)
[  307.823748] RPC:       00000000ce702f14 connect status 115 connected 0
  sock state 2
...
[  314.916193] RPC:       state 7 conn 0 dead 0 zapped 1 sk_shutdown 3
[  314.916251] RPC:       xs_connect scheduled xprt 00000000ce702f14
[  314.916282] RPC:       xs_bind 0.0.0.0:936: ok (0)
[  314.916292] RPC:       worker connecting xprt 00000000ce702f14 via tcp
  to 10.101.1.30 (port 2049)
[  314.916342] RPC:       00000000ce702f14 connect status 115 connected 0
  sock state 2

Fixes: 7c81e6a9d75b ("SUNRPC: Tweak TCP socket shutdown in the RPC client")
Signed-off-by: Siddharth Rajendra Kawar <sikawar@microsoft.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: meson: invalidate cache on polling ECC bit

[ Upstream commit e732e39ed9929c05fd219035bc9653ba4100d4fa ]

'info_buf' memory is cached and driver polls ECC bit in it. This bit
is set by the NAND controller. If 'usleep_range()' returns before device
sets this bit, 'info_buf' will be cached and driver won't see update of
this bit and will loop forever.

Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/d4ef0bd6-816e-f6fa-9385-f05f775f0ae2@sberdevices.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/surface: aggregator: Add missing fwnode_handle_put()

[ Upstream commit acd0acb802b90f88d19ad4337183e44fd0f77c50 ]

In fwnode_for_each_child_node(), we should add
fwnode_handle_put() when break out of the iteration
fwnode_for_each_child_node() as it will automatically
increase and decrease the refcounter.

Fixes: fc622b3d36e6 ("platform/surface: Set up Surface Aggregator device registry")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230322033057.1855741-1-windhl@126.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: think-lmi: Add possible_values for ThinkStation

[ Upstream commit 8a02d70679fc1c434401863333c8ea7dbf201494 ]

ThinkStation platforms don't support the API to return possible_values
but instead embed it in the settings string.

Try and extract this information and set the possible_values attribute
appropriately.

Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230320003221.561750-4-mpearson-lenovo@squebb.ca
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: think-lmi: only display possible_values if available

[ Upstream commit cf337f27f3bfc4aeab4954c468239fd6233c7638 ]

Some attributes don't have any values available. In those cases don't
make the possible_values entry visible.

Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230320003221.561750-3-mpearson-lenovo@squebb.ca
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: think-lmi: use correct possible_values delimiters

[ Upstream commit 45e21289bfc6e257885514790a8a8887da822d40 ]

firmware-attributes class requires that possible values are delimited
using ';' but the Lenovo firmware uses ',' instead.
Parse string and replace where appropriate.

Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230320003221.561750-2-mpearson-lenovo@squebb.ca
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: think-lmi: add missing type attribute

[ Upstream commit 583329dcf22e568a328a944f20427ccfc95dce01 ]

This driver was missing the mandatory type attribute...oops.

Add it in along with logic to determine whether the attribute is an
enumeration type or a string by parsing the possible_values attribute.

Upstream bug https://bugzilla.kernel.org/show_bug.cgi?id=216460

Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230320003221.561750-1-mpearson-lenovo@squebb.ca
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: dwc: Fix PORT_LINK_CONTROL update when CDM check enabled

[ Upstream commit cdce67099117ece371582f706c6eff7d3a65326d ]

If CDM_CHECK is enabled (by the DT "snps,enable-cdm-check" property), 'val'
is overwritten by PCIE_PL_CHK_REG_CONTROL_STATUS initialization.  Commit
ec7b952f453c ("PCI: dwc: Always enable CDM check if "snps,enable-cdm-check"
exists") did not account for further usage of 'val', so we wrote improper
values to PCIE_PORT_LINK_CONTROL when the CDM check is enabled.

Move the PCIE_PORT_LINK_CONTROL update to be completely after the
PCIE_PL_CHK_REG_CONTROL_STATUS register initialization.

[bhelgaas: commit log adapted from Serge's version]
Fixes: ec7b952f453c ("PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists")
Link: https://lore.kernel.org/r/20230310123510.675685-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Fix recursive locking at XRUN during syncing

[ Upstream commit 8c721c53dda512fdd48eb24d6d99e56deee57898 ]

The recent support of low latency playback in USB-audio driver made
the snd_usb_queue_pending_output_urbs() function to be called via PCM
ack ops.  In the new code path, the function is performed already in
the PCM stream lock.  The problem is that, when an XRUN is detected,
the function calls snd_pcm_xrun() to notify, but snd_pcm_xrun() is
supposed to be called only outside the stream lock.  As a result, it
leads to a deadlock of PCM stream locking.

For avoiding such a recursive locking, this patch adds an additional
check to the code paths in PCM core that call the ack callback; now it
checks the error code from the callback, and if it's -EPIPE, the XRUN
is handled in the PCM core side gracefully.  Along with it, the
USB-audio driver code is changed to follow that, i.e. -EPIPE is
returned instead of the explicit snd_pcm_xrun() call when the function
is performed already in the stream lock.

Fixes: d5f871f89e21 ("ALSA: usb-audio: Improved lowlatency playback support")
Reported-and-tested-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20230317195128.3911155-1-john@metanate.com
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by; Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230320142838.494-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: bmips: BCM6358: disable RAC flush for TP1

[ Upstream commit ab327f8acdf8d06601fbf058859a539a9422afff ]

RAC flush causes kernel panics on BCM6358 with EHCI/OHCI when booting from TP1:
[    3.881739] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    3.895011] Reserved instruction in kernel code[#1]:
[    3.900113] CPU: 0 PID: 1 Comm: init Not tainted 5.10.16 #0
[    3.905829] $ 0   : 00000000 10008700 00000000 77d94060
[    3.911238] $ 4   : 7fd1f088 00000000 81431cac 81431ca0
[    3.916641] $ 8   : 00000000 ffffefff 8075cd34 00000000
[    3.922043] $12   : 806f8d40 f3e812b7 00000000 000d9aaa
[    3.927446] $16   : 7fd1f068 7fd1f080 7ff559b8 81428470
[    3.932848] $20   : 00000000 00000000 55590000 77d70000
[    3.938251] $24   : 00000018 00000010
[    3.943655] $28   : 81430000 81431e60 81431f28 800157fc
[    3.949058] Hi    : 00000000
[    3.952013] Lo    : 00000000
[    3.955019] epc   : 80015808 setup_sigcontext+0x54/0x24c
[    3.960464] ra    : 800157fc setup_sigcontext+0x48/0x24c
[    3.965913] Status: 10008703 KERNEL EXL IE
[    3.970216] Cause : 00800028 (ExcCode 0a)
[    3.974340] PrId  : 0002a010 (Broadcom BMIPS4350)
[    3.979170] Modules linked in: ohci_platform ohci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[    3.992907] Process init (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=77e22ec8)
[    4.000776] Stack : 81431ef4 7fd1f080 81431f28 81428470 7fd1f068 81431edc 7ff559b8 81428470
[    4.009467]         81431f28 7fd1f080 55590000 77d70000 77d5498c 80015c70 806f0000 8063ae74
[    4.018149]         08100002 81431f28 0000000a 08100002 81431f28 0000000a 77d6b418 00000003
[    4.026831]         ffffffff 80016414 80080734 81431ecc 81431ecc 00000001 00000000 04000000
[    4.035512]         77d54874 00000000 00000000 00000000 00000000 00000012 00000002 00000000
[    4.044196]         ...
[    4.046706] Call Trace:
[    4.049238] [<80015808>] setup_sigcontext+0x54/0x24c
[    4.054356] [<80015c70>] setup_frame+0xdc/0x124
[    4.059015] [<80016414>] do_notify_resume+0x1dc/0x288
[    4.064207] [<80011b50>] work_notifysig+0x10/0x18
[    4.069036]
[    4.070538] Code: 8fc300b4  00001025  26240008 <ac820000> ac830004  3c048063  0c0228aa  24846a00  26240010
[    4.080686]
[    4.082517] ---[ end trace 22a8edb41f5f983b ]---
[    4.087374] Kernel panic - not syncing: Fatal exception
[    4.092753] Rebooting in 1 seconds..

Because the bootloader (CFE) is not initializing the Read-ahead cache properly
on the second thread (TP1). Since the RAC was not initialized properly, we
should avoid flushing it at the risk of corrupting the instruction stream as
seen in the trace above.

Fixes: d59098a0e9cb ("MIPS: bmips: use generic dma noncoherent ops")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv/kvm: Fix VM hang in case of timer delta being zero.

[ Upstream commit 6eff38048944cadc3cddcf117acfa5199ec32490 ]

In case when VCPU is blocked due to WFI, we schedule the timer
from `kvm_riscv_vcpu_timer_blocking()` to keep timer interrupt
ticking.

But in case when delta_ns comes to be zero, we never schedule
the timer and VCPU keeps sleeping indefinitely until any activity
is done with VM console.

This is easily reproduce-able using kvmtool.
./lkvm-static run -c1 --console virtio -p "earlycon root=/dev/vda" \
         -k ./Image -d rootfs.ext4

Also, just add a print in kvm_riscv_vcpu_vstimer_expired() to
check the interrupt delivery and run `top` or similar auto-upating
cmd from guest. Within sometime one can notice that print from
timer expiry routine stops and the `top` cmd output will stop
updating.

This change fixes this by making sure we schedule the timer even
with delta_ns being zero to bring the VCPU out of sleep immediately.

Fixes: 8f5cb44b1bae ("RISC-V: KVM: Support sstc extension")
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ca8210: Fix unsigned mac_len comparison with zero in ca8210_skb_tx()

[ Upstream commit 748b2f5e82d17480404b3e2895388fc2925f7caf ]

mac_len is of type unsigned, which can never be less than zero.

mac_len = ieee802154_hdr_peek_addrs(skb, &header);
if (mac_len < 0)
return mac_len;

Change this to type int as ieee802154_hdr_peek_addrs() can return negative
integers, this is found by static analysis with smatch.

Fixes: 6c993779ea1d ("ca8210: fix mac_len negative array access")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230306191824.4115839-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: nand: mxic-ecc: Fix mxic_ecc_data_xfer_wait_for_completion() when irq is used

[ Upstream commit 75dce6a941e3f16c3b4878c8b2f46d5d07c619ce ]

wait_for_completion_timeout() and readl_poll_timeout() don't handle their
return value the same way.

wait_for_completion_timeout() returns 0 on time out (and >0 in all other
cases)
readl_poll_timeout() returns 0 on success and -ETIMEDOUT upon a timeout.

In order for the error handling path to work in both cases, the logic
against wait_for_completion_timeout() needs to be inverted.

Fixes: 48e6633a9fa2 ("mtd: nand: mxic-ecc: Add Macronix external ECC engine support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/beddbc374557e44ceec897e68c4a5d12764ddbb9.1676459308.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: meson: initialize struct with zeroes

[ Upstream commit 4ce341de6c02d02aba7c78a6447ccfcaa9eeb328 ]

This structure must be zeroed, because it's field 'hw->core' is used as
'parent' in 'clk_core_fill_parent_index()', but it will be uninitialized.
This happens, because when this struct is not zeroed, pointer 'hw' is
"initialized" by garbage, which is valid pointer, but points to some
garbage. So 'hw' will be dereferenced, but 'core' contains some random
data which will be interpreted as a pointer. The following backtrace is
result of dereference of such pointer:

[    1.081319]  __clk_register+0x414/0x820
[    1.085113]  devm_clk_register+0x64/0xd0
[    1.088995]  meson_nfc_probe+0x258/0x6ec
[    1.092875]  platform_probe+0x70/0xf0
[    1.096498]  really_probe+0xc8/0x3e0
[    1.100034]  __driver_probe_device+0x84/0x190
[    1.104346]  driver_probe_device+0x44/0x120
[    1.108487]  __driver_attach+0xb4/0x220
[    1.112282]  bus_for_each_dev+0x78/0xd0
[    1.116077]  driver_attach+0x2c/0x40
[    1.119613]  bus_add_driver+0x184/0x240
[    1.123408]  driver_register+0x80/0x140
[    1.127203]  __platform_driver_register+0x30/0x40
[    1.131860]  meson_nfc_driver_init+0x24/0x30

Fixes: 1e4d3ba66888 ("mtd: rawnand: meson: fix the clock")
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230227102425.793841-1-AVKrasnov@sberdevices.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: use temporary variable for space_info in btrfs_update_block_group

[ Upstream commit df384da5a49cace5c5e3100803dfd563fd982f93 ]

We do

  cache->space_info->counter += num_bytes;

everywhere in here.  This is makes the lines longer than they need to
be, and will be especially noticeable when we add the active tracking in,
so add a temp variable for the space_info so this is cleaner.

Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix uninitialized variable warning in btrfs_update_block_group

[ Upstream commit efbf35a102b20246cfe4409c6ae92e72ecb67ab8 ]

reclaim isn't set in the alloc case, however we only care about
reclaim in the !alloc case.  This isn't an actual problem, however
-Wmaybe-uninitialized will complain, so initialize reclaim to quiet the
compiler.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: df384da5a49c ("btrfs: use temporary variable for space_info in btrfs_update_block_group")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Fix wrong return in kprobe_event_gen_test.c

[ Upstream commit bc4f359b3b607daac0290d0038561237a86b38cb ]

Overwriting the error code with the deletion result may cause the
function to return 0 despite encountering an error. Commit b111545d26c0
("tracing: Remove the useless value assignment in
test_create_synth_event()") solves a similar issue by
returning the original error code, so this patch does the same.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Link: https://lore.kernel.org/linux-trace-kernel/20230131075818.5322-1-aagusev@ispras.ru
Signed-off-by: Anton Gusev <aagusev@ispras.ru>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/power turbostat: fix decoding of HWP_STATUS

[ Upstream commit 92c25393586ac799b9b7d9e50434f3c44a7622c4 ]

The "excursion to minimum" information is in bit2
in HWP_STATUS MSR. Fix the bitmask used for
decoding the register.

Signed-off-by: Antti Laakso <antti.laakso@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/power turbostat: Fix /dev/cpu_dma_latency warnings

[ Upstream commit 40aafc7d58d3544f152a863a0e9863014b6d5d8c ]

When running as non-root the following error is seen in turbostat:

turbostat: fopen /dev/cpu_dma_latency
: Permission denied

turbostat and the man page have information on how to avoid other
permission errors, so these can be fixed the same way.

Provide better /dev/cpu_dma_latency warnings that provide instructions on
how to avoid the error, and update the man page.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: au1200fb: Fix potential divide by zero

[ Upstream commit 44a3b36b42acfc433aaaf526191dd12fbb919fdb ]

var->pixclock can be assigned to zero by user. Without
proper check, divide by zero would occur when invoking
macro PICOS2KHZ in au1200fb_fb_check_var.

Error out if var->pixclock is zero.

Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: lxfb: Fix potential divide by zero

[ Upstream commit 61ac4b86a4c047c20d5cb423ddd87496f14d9868 ]

var->pixclock can be assigned to zero by user. Without proper
check, divide by zero would occur in lx_set_clock.

Error out if var->pixclock is zero.

Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: intelfb: Fix potential divide by zero

[ Upstream commit d823685486a3446d061fed7c7d2f80af984f119a ]

Variable var->pixclock is controlled by user and can be assigned
to zero. Without proper check, divide by zero would occur in
intelfbhw_validate_mode and intelfbhw_mode_to_hw.

Error out if var->pixclock is zero.

Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: nvidia: Fix potential divide by zero

[ Upstream commit 92e2a00f2987483e1f9253625828622edd442e61 ]

variable var->pixclock can be set by user. In case it
equals to zero, divide by zero would occur in nvidiafb_set_par.

Similar crashes have happened in other fbdev drivers. There
is no check and modification on var->pixclock along the call
chain to nvidia_check_var and nvidiafb_set_par. We believe it
could also be triggered in driver nvidia from user site.

Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Lower maximum allowed MTU in XSK to match XDP prerequisites

[ Upstream commit 78dee7befd56987283c13877b834c0aa97ad51b9 ]

XSK redirecting XDP programs require linearity, hence applies
restrictions on the MTU. For PAGE_SIZE=4K, MTU shouldn't exceed 3498.

Features that contradict with XDP such HW-LRO and HW-GRO are enforced
by the driver in advance, during XSK params validation, except for MTU,
which was not enforced before this patch.

This has been spotted during test scenario described below:
Attaching xdpsock program (PAGE_SIZE=4K), with MTU < 3498, detaching
XDP program, changing the MTU to arbitrary value in the range
[3499, 3754], attaching XDP program again, which ended up with failure
since MTU is > 3498.

This commit lowers the XSK MTU limitation to be aligned with XDP MTU
limitation, since XSK socket is meaningless without XDP program.

Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fixed kfd_process cleanup on module exit.

[ Upstream commit 20bc9f76b6a2455c6b54b91ae7634f147f64987f ]

Handle case when module is unloaded (kfd_exit) before a process space
(mm_struct) is released.

v2: Fixed potential race conditions by removing all kfd_process from
the process table first, then working on releasing the resources.

v3: Fixed loop element access / synchronization.  Fixed extra empty lines.

Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620

[ Upstream commit b65d44fa0fe072c91bf41cd8756baa2b4c77eff2 ]

Added a quirk to fix Lexar NM620 1TB SSD reporting duplicate NGUIDs.

Signed-off-by: Philipp Geulen <p.geulen@js-elektronik.de>
Reviewed-by: Chaitanya Kulkarni <kkch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched_getaffinity: don't assume 'cpumask_size()' is fully initialized

[ Upstream commit 6015b1aca1a233379625385feb01dd014aca60b5 ]

The getaffinity() system call uses 'cpumask_size()' to decide how big
the CPU mask is - so far so good.  It is indeed the allocation size of a
cpumask.

But the code also assumes that the whole allocation is initialized
without actually doing so itself.  That's wrong, because we might have
fixed-size allocations (making copying and clearing more efficient), but
not all of it is then necessarily used if 'nr_cpu_ids' is smaller.

Having checked other users of 'cpumask_size()', they all seem to be ok,
either using it purely for the allocation size, or explicitly zeroing
the cpumask before using the size in bytes to copy it.

See for example the ublk_ctrl_get_queue_affinity() function that uses
the proper 'zalloc_cpumask_var()' to make sure that the whole mask is
cleared, whether the storage is on the stack or if it was an external
allocation.

Fix this by just zeroing the allocation before using it.  Do the same
for the compat version of sched_getaffinity(), which had the same logic.

Also, for consistency, make sched_getaffinity() use 'cpumask_bits()' to
access the bits.  For a cpumask_var_t, it ends up being a pointer to the
same data either way, but it's just a good idea to treat it like you
would a 'cpumask_t'.  The compat case already did that.

Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/lkml/7d026744-6bd6-6827-0471-b5e8eae0be3f@arm.com/
Cc: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: tools: pfrut: Check if the input of level and type is in the right numeric range

[ Upstream commit 0bc23d8b2237a104d7f8379d687aa4cb82e2968b ]

The user provides arbitrary non-numeic value to level and type,
which could bring unexpected behavior. In this case the expected
behavior would be to throw an error.

 pfrut -h
usage: pfrut [OPTIONS]
code injection:
-l, --load
-s, --stage
-a, --activate
-u, --update [stage and activate]
-q, --query
-d, --revid
update telemetry:
-G, --getloginfo
-T, --type(0:execution, 1:history)
-L, --level(0, 1, 2, 4)
-R, --read
-D, --revid log

 pfrut -T A
 pfrut -G
log_level:0
log_type:0
log_revid:2
max_data_size:65536
chunk1_size:0
chunk2_size:1530
rollover_cnt:0
reset_cnt:17

Fix this by restricting the input to be in the expected range.

Reported-by: Hariganesh Govindarajulu <hariganesh.govindarajulu@intel.com>
Suggested-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: tgafb: Fix potential divide by zero

[ Upstream commit f90bd245de82c095187d8c2cabb8b488a39eaecc ]

fb_set_var would by called when user invokes ioctl with cmd
FBIOPUT_VSCREENINFO. User-provided data would finally reach
tgafb_check_var. In case var->pixclock is assigned to zero,
divide by zero would occur when checking whether reciprocal
of var->pixclock is too high.

Similar crashes have happened in other fbdev drivers. There
is no check and modification on var->pixclock along the call
chain to tgafb_check_var. We believe it could also be triggered
in driver tgafb from user site.

Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()

[ Upstream commit 98e5eb110095ec77cb6d775051d181edbf9cd3cf ]

tuning_ctl_set() might have buffer overrun at (X) if it didn't break
from loop by matching (A).

static int tuning_ctl_set(...)
{
for (i = 0; i < TUNING_CTLS_COUNT; i++)
(A) if (nid == ca0132_tuning_ctls[i].nid)
break;

snd_hda_power_up(...);
(X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...);
snd_hda_power_down(...);                ^

return 1;
}

We will get below error by cppcheck

sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12
 for (i = 0; i < TUNING_CTLS_COUNT; i++)
 ^
sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds
 dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20,
                                           ^
This patch cares non match case.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfe9eap7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: asihpi: check pao in control_message()

[ Upstream commit 9026c0bf233db53b86f74f4c620715e94eb32a09 ]

control_message() might be called with pao = NULL.
Here indicates control_message() as sample.

(B) static void control_message(struct hpi_adapter_obj *pao, ...)
{                                                   ^^^
struct hpi_hw_obj *phw = pao->priv;
...                      ^^^
}

(A) void _HPI_6205(struct hpi_adapter_obj *pao, ...)
{                                      ^^^
...
case HPI_OBJ_CONTROL:
(B) control_message(pao, phm, phr);
break;          ^^^
...
}

void HPI_6205(...)
{
...
(A) _HPI_6205(NULL, phm, phr);
...       ^^^^
}

Therefore, We will get too many warning via cppcheck, like below

sound/pci/asihpi/hpi6205.c:238:27: warning: Possible null pointer dereference: pao [nullPointer]
 struct hpi_hw_obj *phw = pao->priv;
                          ^
sound/pci/asihpi/hpi6205.c:433:13: note: Calling function '_HPI_6205', 1st argument 'NULL' value is 0
  _HPI_6205(NULL, phm, phr);
            ^
sound/pci/asihpi/hpi6205.c:401:20: note: Calling function 'control_message', 1st argument 'pao' value is 0
   control_message(pao, phm, phr);
                   ^
Set phr->error like many functions doing, and don't call _HPI_6205()
with NULL.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ttypeaqz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hsr: Don't log netdev_err message on unknown prp dst node

[ Upstream commit 28e8cabe80f3e6e3c98121576eda898eeb20f1b1 ]

If no frames has been exchanged with a node for HSR_NODE_FORGET_TIME, the
node will be deleted from the node_db list. If a frame is sent to the node
after it is deleted, a netdev_err message for each slave interface is
produced. This should not happen with dan nodes because of supervision
frames, but can happen often with san nodes, which clutters the kernel
log. Since the hsr protocol does not support sans, this is only relevant
for the prp protocol.

Signed-off-by: Kristian Overskeid <koverskeid@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: fix potential kgd_mem UAFs

[ Upstream commit 9da050b0d9e04439d225a2ec3044af70cdfb3933 ]

kgd_mem pointers returned by kfd_process_device_translate_handle are
only guaranteed to be valid while p->mutex is held. As soon as the mutex
is unlocked, another thread can free the BO.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: fix a potential double free in pqm_create_queue

[ Upstream commit b2ca5c5d416b4e72d1e9d0293fc720e2d525fd42 ]

Set *q to NULL on errors, otherwise pqm_create_queue would free it
again.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix BO offset for multi-VMA page migration

[ Upstream commit b4ee9606378bb9520c94d8b96f0305c3696f5c29 ]

svm_migrate_ram_to_vram migrates a prange from sys ram to vram. The prange may
cross multiple vma. Need remember current dst vram offset in the TTM resource for
each migration.

v2: squash in warning fix (Alex)

Signed-off-by: Xiaogang Chen <Xiaogang.Chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/PVH: obtain VGA console info in Dom0

[ Upstream commit 934ef33ee75c3846f605f18b65048acd147e3918 ]

A new platform-op was added to Xen to allow obtaining the same VGA
console information PV Dom0 is handed. Invoke the new function and have
the output data processed by xen_init_vga().

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/8f315e92-7bda-c124-71cc-478ab9c5e610@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: avoid signed overflow in slot_store()

[ Upstream commit 3bc57292278a0b6ac4656cad94c14f2453344b57 ]

slot_store() uses kstrtouint() to get a slot number, but stores the
result in an "int" variable (by casting a pointer).
This can result in a negative slot number if the unsigned int value is
very large.

A negative number means that the slot is empty, but setting a negative
slot number this way will not remove the device from the array.  I don't
think this is a serious problem, but it could cause confusion and it is
best to fix it.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: IPC4: update gain ipc msg definition to align with fw

[ Upstream commit e45cd86c3a78bfb9875a5eb8ab5dab459b59bbe2 ]

Recent firmware changes modified the curve duration from 32 to 64 bits,
which breaks volume ramps. A simple solution would be to change the
definition, but unfortunately the ASoC topology framework only supports
up to 32 bit tokens.

This patch suggests breaking the 64 bit value in low and high parts, with
only the low-part extracted from topology and high-part only zeroes. Since
the curve duration is represented in hundred of nanoseconds, we can still
represent a 400s ramp, which is just fine. The defacto ABI change has no
effect on existing users since the IPC4 firmware has not been released just
yet.

Link: https://github.com/thesofproject/linux/issues/4026
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307110656.1816-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: pci-tng: revert invalid bar size setting

[ Upstream commit ca09e2a351fbc7836ba9418304ff0c3e72addfe0 ]

The logic for the ioremap is to find the resource index 3 (IRAM) and
infer the BAR address by subtracting the IRAM offset. The BAR size
defined in hardware specifications is 2MB.

The commit 5947b2726beb6 ("ASoC: SOF: Intel: Check the bar size before
remapping") tried to find the BAR size by querying the resource length
instead of a pre-canned value, but by requesting the size for index 3
it only gets the size of the IRAM. That's obviously wrong and prevents
the probe from proceeding.

This commit attempted to fix an issue in a fuzzing/simulated
environment but created another on actual devices, so the best course
of action is to revert that change.

Reported-by: Ferry Toth <fntoth@gmail.com>
Tested-by: Ferry Toth <fntoth@gmail.com> (Intel Edison-Arduino)
Link: https://github.com/thesofproject/linux/issues/3901
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307095341.3222-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: ipc4-topology: Fix incorrect sample rate print unit

[ Upstream commit 9e269e3aa9006440de639597079ee7140ef5b5f3 ]

This patch fixes the sample rate print unit from KHz to Hz.
E.g. 48000KHz becomes 48000Hz.

Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307110751.2053-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: ipc3: Check for upper size limit for the received message

[ Upstream commit 989a3e4479177d0f4afab8be1960731bc0ffbbd0 ]

The sof_ipc3_rx_msg() checks for minimum size of a new rx message but it is
missing the check for upper limit.
Corrupted or compromised firmware might be able to take advantage of this
to cause out of bounds reads outside of the message area.

Reported-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307114917.5124-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: video: Add backlight=native DMI quirk for Dell Vostro 15 3535

[ Upstream commit 89b0411481967a2e8c91190a211a359966cfcf4b ]

Sometimes the system boots up with a acpi_video0 backlight interface
which doesn't work. So add Dell Vostro 15 3535 into the
video_detect_dmi_table to set it to native explicitly.

Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

zstd: Fix definition of assert()

[ Upstream commit 6906598f1ce93761716d780b6e3f171e13f0f4ce ]

assert(x) should emit a warning if x is false. WARN_ON(x) emits a
warning if x is true. Thus, assert(x) should be defined as WARN_ON(!x)
rather than WARN_ON(x).

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: avs: nau8825: Adjust clock control

[ Upstream commit 6206b2e787da2ed567922c37bb588a44f6fb6705 ]

Internal clock shall be adjusted also in cases when DAPM event other
than 'ON' is triggered.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230303134854.2277146-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: avs: ssm4567: Remove nau8825 bits

[ Upstream commit 933de2d127281731166cf2880fa1e23c5a0f7faa ]

Some of the nau8825 clock control got into the ssm4567, remove it.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230303134854.2277146-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: avs: da7219: Explicitly define codec format

[ Upstream commit 61f368624fe4d0c25c6e9c917574b8ace51d776e ]

da7219 is headset codec configured in 48000/2/S24_LE format regardless
of front end format, so force it to be so.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230303134854.2277146-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: avs: max98357a: Explicitly define codec format

[ Upstream commit d16c893425d07ada1fdd817ec06d322efcf69480 ]

max98357a is speaker codec configured in 48000/2/S16_LE format
regardless of front end format, so force it to be so.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230303134854.2277146-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: tx-macro: Fix for KASAN: slab-out-of-bounds

[ Upstream commit e5e7e398f6bb7918dab0612eb6991f7bae95520d ]

When we run syzkaller we get below Out of Bound.
    "KASAN: slab-out-of-bounds Read in regcache_flat_read"

    Below is the backtrace of the issue:

    dump_backtrace+0x0/0x4c8
    show_stack+0x34/0x44
    dump_stack_lvl+0xd8/0x118
    print_address_description+0x30/0x2d8
    kasan_report+0x158/0x198
    __asan_report_load4_noabort+0x44/0x50
    regcache_flat_read+0x10c/0x110
    regcache_read+0xf4/0x180
    _regmap_read+0xc4/0x278
    _regmap_update_bits+0x130/0x290
    regmap_update_bits_base+0xc0/0x15c
    snd_soc_component_update_bits+0xa8/0x22c
    snd_soc_component_write_field+0x68/0xd4
    tx_macro_digital_mute+0xec/0x140

    Actually There is no need to have decimator with 32 bits.
    By limiting the variable with short type u8 issue is resolved.

Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Link: https://lore.kernel.org/r/20230304080702.609-1-quic_visr@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Zero padding when dumping algos and encap

[ Upstream commit 8222d5910dae08213b6d9d4bc9a7f8502855e624 ]

When copying data to user-space we should ensure that only valid
data is copied over.  Padding in structures may be filled with
random (possibly sensitve) data and should never be given directly
to user-space.

This patch fixes the copying of xfrm algorithms and the encap
template in xfrm_user so that padding is zeroed.

Reported-by: syzbot+fa5414772d5c445dac3c@syzkaller.appspotmail.com
Reported-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: fix missing unload_nls() in smb2_reconnect()

[ Upstream commit c24bb1a87dc3f2d77d410eaac2c6a295961bf50e ]

Make sure to unload_nls() @nls_codepage if we no longer need it.

Fixes: bc962159e8e3 ("cifs: avoid race conditions with parallel reconnects")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: efi: Set NX compat flag in PE/COFF header

[ Upstream commit 3c66bb1918c262dd52fb4221a8d372619c5da70a ]

The PE/COFF header has a NX compat flag which informs the firmware that
the application does not rely on memory regions being mapped with both
executable and writable permissions at the same time.

This is typically used by the firmware to decide whether it can set the
NX attribute on all allocations it returns, but going forward, it may be
used to enforce a policy that only permits applications with the NX flag
set to be loaded to begin wiht in some configurations, e.g., when Secure
Boot is in effect.

Even though the arm64 version of the EFI stub may relocate the kernel
before executing it, it always did so after disabling the MMU, and so we
were always in line with what the NX compat flag conveys, we just never
bothered to set it.

So let's set the flag now.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mscc: ocelot: fix stats region batching

[ Upstream commit 6acc72a43eac78a309160d0a7512bbc59bcdd757 ]

The blamed commit changed struct ocelot_stat_layout :: "u32 offset" to
"u32 reg".

However, "u32 reg" is not quite a register address, but an enum
ocelot_reg, which in itself encodes an enum ocelot_target target in the
upper bits, and an index into the ocelot->map[target][] array in the
lower bits.

So, whereas the previous code comparison between stats_layout[i].offset
and last + 1 was correct (because those "offsets" at the time were
32-bit relative addresses), the new code, comparing layout[i].reg to
last + 4 is not correct, because the "reg" here is an enum/index, not an
actual register address.

What we want to compare are indeed register addresses, but to do that,
we need to actually go through the same motions as
__ocelot_bulk_read_ix() itself.

With this bug, all statistics counters are deemed by
ocelot_prepare_stats_regions() as constituting their own region.
(Truncated) log on VSC9959 (Felix) below (prints added by me):

Before:

region of 1 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x001]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x002]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x041]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x042]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x081]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x0ac]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x100]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x101]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x111]

After:

region of 67 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 45 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 18 contiguous counters starting with SYS:STAT:CNT[0x100]

Since commit d87b1c08f38a ("net: mscc: ocelot: use bulk reads for
stats") intended bulking as a performance improvement, and since now,
with trivial-sized regions, performance is even worse than without
bulking at all, this could easily qualify as a performance regression.

Fixes: d4c367650704 ("net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Do not let histogram values have some modifiers

[ Upstream commit e0213434fe3e4a0d118923dc98d31e7ff1cd9e45 ]

Histogram values can not be strings, stacktraces, graphs, symbols,
syscalls, or grouped in buckets or log. Give an error if a value is set to
do so.

Note, the histogram code was not prepared to handle these modifiers for
histograms and caused a bug.

Mark Rutland reported:

 # echo 'p:copy_to_user __arch_copy_to_user n=$arg2' >> /sys/kernel/tracing/kprobe_events
 # echo 'hist:keys=n:vals=hitcount.buckets=8:sort=hitcount' > /sys/kernel/tracing/events/kprobes/copy_to_user/trigger
 # cat /sys/kernel/tracing/events/kprobes/copy_to_user/hist
[  143.694628] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[  143.695190] Mem abort info:
[  143.695362]   ESR = 0x0000000096000004
[  143.695604]   EC = 0x25: DABT (current EL), IL = 32 bits
[  143.695889]   SET = 0, FnV = 0
[  143.696077]   EA = 0, S1PTW = 0
[  143.696302]   FSC = 0x04: level 0 translation fault
[  143.702381] Data abort info:
[  143.702614]   ISV = 0, ISS = 0x00000004
[  143.702832]   CM = 0, WnR = 0
[  143.703087] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000448f9000
[  143.703407] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[  143.704137] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[  143.704714] Modules linked in:
[  143.705273] CPU: 0 PID: 133 Comm: cat Not tainted 6.2.0-00003-g6fc512c10a7c #3
[  143.706138] Hardware name: linux,dummy-virt (DT)
[  143.706723] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  143.707120] pc : hist_field_name.part.0+0x14/0x140
[  143.707504] lr : hist_field_name.part.0+0x104/0x140
[  143.707774] sp : ffff800008333a30
[  143.707952] x29: ffff800008333a30 x28: 0000000000000001 x27: 0000000000400cc0
[  143.708429] x26: ffffd7a653b20260 x25: 0000000000000000 x24: ffff10d303ee5800
[  143.708776] x23: ffffd7a6539b27b0 x22: ffff10d303fb8c00 x21: 0000000000000001
[  143.709127] x20: ffff10d303ec2000 x19: 0000000000000000 x18: 0000000000000000
[  143.709478] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[  143.709824] x14: 0000000000000000 x13: 203a6f666e692072 x12: 6567676972742023
[  143.710179] x11: 0a230a6d6172676f x10: 000000000000002c x9 : ffffd7a6521e018c
[  143.710584] x8 : 000000000000002c x7 : 7f7f7f7f7f7f7f7f x6 : 000000000000002c
[  143.710915] x5 : ffff10d303b0103e x4 : ffffd7a653b20261 x3 : 000000000000003d
[  143.711239] x2 : 0000000000020001 x1 : 0000000000000001 x0 : 0000000000000000
[  143.711746] Call trace:
[  143.712115]  hist_field_name.part.0+0x14/0x140
[  143.712642]  hist_field_name.part.0+0x104/0x140
[  143.712925]  hist_field_print+0x28/0x140
[  143.713125]  event_hist_trigger_print+0x174/0x4d0
[  143.713348]  hist_show+0xf8/0x980
[  143.713521]  seq_read_iter+0x1bc/0x4b0
[  143.713711]  seq_read+0x8c/0xc4
[  143.713876]  vfs_read+0xc8/0x2a4
[  143.714043]  ksys_read+0x70/0xfc
[  143.714218]  __arm64_sys_read+0x24/0x30
[  143.714400]  invoke_syscall+0x50/0x120
[  143.714587]  el0_svc_common.constprop.0+0x4c/0x100
[  143.714807]  do_el0_svc+0x44/0xd0
[  143.714970]  el0_svc+0x2c/0x84
[  143.715134]  el0t_64_sync_handler+0xbc/0x140
[  143.715334]  el0t_64_sync+0x190/0x194
[  143.715742] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (f9400000)
[  143.716510] ---[ end trace 0000000000000000 ]---
Segmentation fault

Link: https://lkml.kernel.org/r/20230302020810.559462599@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: c6afad49d127f ("tracing: Add hist trigger 'sym' and 'sym-offset' modifiers")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Add .graph suffix option to histogram value

[ Upstream commit a2c54256dec7510477e2b4f4db187e638f7cac37 ]

Add the .graph suffix which shows the bar graph of the histogram value.

For example, the below example shows that the bar graph
of the histogram of the runtime for each tasks.

------
  # cd /sys/kernel/debug/tracing/
  # echo hist:keys=pid:vals=runtime.graph:sort=pid > \
   events/sched/sched_stat_runtime/trigger
  # sleep 10
  # cat events/sched/sched_stat_runtime/hist
 # event histogram
 #
 # trigger info: hist:keys=pid:vals=hitcount,runtime.graph:sort=pid:size=2048 [active]
 #

 { pid:         14 } hitcount:          2  runtime:
 { pid:         16 } hitcount:          8  runtime:
 { pid:         26 } hitcount:          1  runtime:
 { pid:         57 } hitcount:          3  runtime:
 { pid:         61 } hitcount:         20  runtime: ###
 { pid:         66 } hitcount:          2  runtime:
 { pid:         70 } hitcount:          3  runtime:
 { pid:         72 } hitcount:          2  runtime:
 { pid:        145 } hitcount:         14  runtime: ####################
 { pid:        152 } hitcount:          5  runtime: #######
 { pid:        153 } hitcount:          2  runtime: ####

 Totals:
     Hits: 62
     Entries: 11
     Dropped: 0
-------

Link: https://lore.kernel.org/linux-trace-kernel/166610813953.56030.10944148382315789485.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Stable-dep-of: e0213434fe3e ("tracing: Do not let histogram values have some modifiers")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Add .percent suffix option to histogram values

[ Upstream commit abaa5258ce5e5887a9de049f50a85dc023391a1c ]

Add .percent suffix option to show the histogram values in percentage.
This feature is useful when we need yo undersntand the overall trend
for the histograms of large values.
E.g. this shows the runtime percentage for each tasks.

------
  # cd /sys/kernel/debug/tracing/
  # echo hist:keys=pid:vals=hitcount,runtime.percent:sort=pid > \
    events/sched/sched_stat_runtime/trigger
  # sleep 10
  # cat events/sched/sched_stat_runtime/hist
 # event histogram
 #
 # trigger info: hist:keys=pid:vals=hitcount,runtime.percent:sort=pid:size=2048 [active]
 #

 { pid:          8 } hitcount:          7  runtime (%):   4.14
 { pid:         14 } hitcount:          5  runtime (%):   3.69
 { pid:         16 } hitcount:         11  runtime (%):   3.41
 { pid:         61 } hitcount:         41  runtime (%):  19.75
 { pid:         65 } hitcount:          4  runtime (%):   1.48
 { pid:         70 } hitcount:          6  runtime (%):   3.60
 { pid:         72 } hitcount:          2  runtime (%):   1.10
 { pid:        144 } hitcount:         10  runtime (%):  32.01
 { pid:        151 } hitcount:          8  runtime (%):  22.66
 { pid:        152 } hitcount:          2  runtime (%):   8.10

 Totals:
     Hits: 96
     Entries: 10
     Dropped: 0
-----

Link: https://lore.kernel.org/linux-trace-kernel/166610813077.56030.4238090506973562347.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Stable-dep-of: e0213434fe3e ("tracing: Do not let histogram values have some modifiers")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: fsl_lpuart: fix race on RX DMA shutdown

[ Upstream commit 1be6f2b15f902c02e055ae0b419ca789200473c9 ]

From time to time DMA completion can come in the middle of DMA shutdown:

<process ctx>: <IRQ>:
lpuart32_shutdown()
  lpuart_dma_shutdown()
    del_timer_sync()
lpuart_dma_rx_complete()
  lpuart_copy_rx_to_tty()
    mod_timer()
    lpuart_dma_rx_free()

When the timer fires a bit later, sport->dma_rx_desc is NULL:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
pc : lpuart_copy_rx_to_tty+0xcc/0x5bc
lr : lpuart_timer_func+0x1c/0x2c
Call trace:
 lpuart_copy_rx_to_tty
 lpuart_timer_func
 call_timer_fn
 __run_timers.part.0
 run_timer_softirq
 __do_softirq
 __irq_exit_rcu
 irq_exit
 handle_domain_irq
 gic_handle_irq
 call_on_irq_stack
 do_interrupt_handler
 ...

To fix this fold del_timer_sync() into lpuart_dma_rx_free() after
dmaengine_terminate_sync() to make sure timer will not be re-started in
lpuart_copy_rx_to_tty() <= lpuart_dma_rx_complete().

Fixes: 4a8588a1cf86 ("serial: fsl_lpuart: delete timer on shutdown")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20230309134302.74940-2-alexander.sverdlin@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API

[ Upstream commit 8682ab0eea89c300ebb120c02ead3999ca5560a8 ]

Convert dmaengine_terminate_all() calls to synchronous and asynchronous
versions where appropriate.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20221123023619.30173-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 1be6f2b15f90 ("tty: serial: fsl_lpuart: fix race on RX DMA shutdown")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/disp/dpu: fix sc7280_pp base offset

[ Upstream commit ce68153edb5b36ddf87a19ed5a85131498690bbf ]

At sc7280, pingpong block is used to management the dither effects
to reduce distortion at panel. Currently pingpong-0 base offset is
wrongly set at 0x59000. This mistake will not cause system to crash.
However it will make dither not work. This patch correct sc7280 ping
pong-0 block base offset.

Changes in v2:
-- add more details info n regrading of pingpong block at commit text

Fixes: 591e34a091d1 ("drm/msm/disp/dpu1: add support for display for SC7280 target")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524332/
Link: https://lore.kernel.org/r/1677533800-3125-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: correct sm8250 and sm8350 scaler

[ Upstream commit 03c0c3cb22a4ff29afba1b43f0330289ea80433f ]

QSEED4 is a newer variant of QSEED3LITE, which should be used on
sm8250 and sm8350. Fix the DPU caps structure and used feature masks.

Fixes: d21fc5dfc3df ("drm/msm/dpu1: add support for qseed3lite used on sm8250")
Fixes: 0e91bcbb0016 ("drm/msm/dpu: Add SM8350 to hw catalog")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/522229/
Link: https://lore.kernel.org/r/20230211231259.1308718-10-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Refactor sc7280_pp location

[ Upstream commit 1a5b5372e3b0a4cc65a0cbb724b1b0859f4ac63c ]

The sc7280_pp declaration is not located by the other _pp
declarations, but rather hidden around the _merge_3d
declarations. Let's fix this to avoid confusion.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/509153/
Link: https://lore.kernel.org/r/20221028120812.339100-3-robert.foss@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Stable-dep-of: 03c0c3cb22a4 ("drm/msm/dpu: correct sm8250 and sm8350 scaler")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: aspeed: p10bmc: Update battery node name

[ Upstream commit a8cef541dd5ef9445130660008c029205c4c5aa5 ]

The ADC sensor for the battery needs to be named "iio-hwmon" for
compatibility with user space applications.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230202152759.67069-1-eajames@linux.ibm.com
Fixes: bf1914e2cfed ("ARM: dts: aspeed: p10bmc: Fix ADC iio-hwmon battery node name")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230221003352.1218797-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>