profile/ivi/kernel-x86-ivi.git
15 years agodrm/i915: Disable GEM when a broken video BIOS takes up the whole aperture.
Eric Anholt [Thu, 2 Jul 2009 16:30:50 +0000 (09:30 -0700)]
drm/i915: Disable GEM when a broken video BIOS takes up the whole aperture.

This is seen on some G41 systems, where the BIOS will consume all but
a few KB of the aperture.  This should be bad for all operating systems, as
it means that the OS can't dynamically manage memory between graphics and
the rest of the system, and OSes that did static memory management
statically add memory in addition to the BIOS allocation anyway.  So, instead
of working around it, just fail out verbosely.

fd.o bug #21574

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
15 years agodrm/i915: Check the LID device to decide whether the LVDS should be initialized
Zhao Yakui [Fri, 26 Jun 2009 01:46:18 +0000 (09:46 +0800)]
drm/i915: Check the LID device to decide whether the LVDS should be initialized

On some boxes the mobile chipset is used and there is no LVDS device. In such
case we had better not initialize the LVDS output device so that one pipe can
be used for other output device. For example: E-TOP.

But unfortunately the LVDS device is still initialized on the boxes based on
mobile chipset in KMS mode. It brings that this pipe occupied by LVDS can't be
used for other output device.

After checking the acpidump we find that there is no LID device on such boxes.
In such case we can use the LID device to decide whether the LVDS device should
be initialized.

If there is no LID device, we can think that there is no LVDS device. It is
unnecessary to initialize the LVDS output device.
If there exists the LID device, it will continue the current flowchart.

Maybe on some boxes there is no LVDS device but the LID device is found. In
such case it should be added to the quirk list.

http://bugs.freedesktop.org/show_bug.cgi?id=21496
http://bugs.freedesktop.org/show_bug.cgi?id=21856
http://bugs.freedesktop.org/show_bug.cgi?id=21127

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: squashed in style fixups]
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Move lock to more reasonable location
Ben Gamari [Wed, 1 Jul 2009 19:01:36 +0000 (15:01 -0400)]
drm/i915: Move lock to more reasonable location

Make this consistent with the unlock statement. Also fix a
minor typo in debugfs formatting

Signed-off-by: Ben Gamari <bgamari.foss@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Add gtt_offset to gem object list debugfs output
Ben Gamari [Wed, 1 Jul 2009 19:01:35 +0000 (15:01 -0400)]
drm/i915: Add gtt_offset to gem object list debugfs output

This is quite useful for verifying that objects are actually mapped when
they need to be.

Signed-off-by: Ben Gamari <bgamari.foss@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Remove gtt_bound from drm_i915_gem_object
Ben Gamari [Wed, 1 Jul 2009 19:01:34 +0000 (15:01 -0400)]
drm/i915: Remove gtt_bound from drm_i915_gem_object

This wasn't even used as far as I could tell and will only confuse
people (like me).

Signed-off-by: Ben Gamari <bgamari.foss@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Disable VGA output when doing DRM_MODE_DPMS_OFF.
ling.ma@intel.com [Thu, 25 Jun 2009 03:55:57 +0000 (11:55 +0800)]
drm/i915: Disable VGA output when doing DRM_MODE_DPMS_OFF.

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: crt fetch EDID by DVI-I converter on G4x platform
ling.ma@intel.com [Tue, 30 Jun 2009 03:35:34 +0000 (11:35 +0800)]
drm/i915: crt fetch EDID by DVI-I converter on G4x platform

Usually crt mainly get modes via GPIOA ports.
However on G4X platform we need to probe possible
ports for DVI-I, which could be wired to GPIOD,
then fetch our desired EDID, i.e on DG45ID platform
we successfully fetch EDID by GPIOD port.

It fixed freedesktop.org bug #21084

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Don't update display FIFO watermark on IGDNG
Zhenyu Wang [Mon, 6 Jul 2009 09:27:52 +0000 (17:27 +0800)]
drm/i915: Don't update display FIFO watermark on IGDNG

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Adjust DisplayPort clocks to use 96MHz reference
Keith Packard [Thu, 25 Jun 2009 06:09:15 +0000 (23:09 -0700)]
drm/i915: Adjust DisplayPort clocks to use 96MHz reference

For some reason, the DP clocks were based off a 100MHz reference instead of
the standard 96MHz reference. This caused some DP monitors to fail to lock
to the signal.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Make driver less chatty
Keith Packard [Sun, 28 Jun 2009 22:42:17 +0000 (15:42 -0700)]
drm/i915: Make driver less chatty

Convert many printk calls to DRM_DEBUG calls to reduce kernel log noise
for normal activities. Switch other printk calls to DRM_ERROR or DRM_INFO.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: fix up a raw 64bit divide
Andy Whitcroft [Wed, 1 Jul 2009 14:20:59 +0000 (15:20 +0100)]
drm/i915: fix up a raw 64bit divide

We are seeing compilation failures on i386 in some environments due
to an undefined reference as below:

    ERROR: "__udivdi3" [drivers/gpu/drm/i915/i915.ko] undefined!

This is generated due to a raw 64 bit divide in the i915 driver.  Fix up
this raw divide.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: enable sdvo lvds scaling function.
ling.ma@intel.com [Tue, 30 Jun 2009 03:35:35 +0000 (11:35 +0800)]
drm/i915: enable sdvo lvds scaling function.

Currently we implemented basic sdvo lvds function,
But except for sdvo lvds fixed mode, we can not switch
to other modes, otherwise display get black. The patch
handle three operations to enable sdvo lvds. At first
duplicate sdvo fixed mode for adjustment, then according
to fixed mode line valid all modes, at last adjust input
mode to fit our requirement.

Acked by Li Peng <peng.li@linux.intel.com>
Signed-off-by: Ma Ling <ling.ma@intel.com>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: Set SSC frequency for 8xx chips correctly
ling.ma@intel.com [Thu, 25 Jun 2009 02:59:22 +0000 (10:59 +0800)]
drm/i915: Set SSC frequency for 8xx chips correctly

All 8xx class chips have the 66/48 split, not just 855.

Signed-off-by: Ma Ling <ling.ma@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: add FIFO watermark support
Shaohua Li [Fri, 26 Jun 2009 03:23:55 +0000 (11:23 +0800)]
drm/i915: add FIFO watermark support

This patch from jbarnes and myself adds FIFO watermark control to the
driver.  This is needed for both power saving features on new platforms
with the so-called "big FIFO" and for controlling FIFO allocation
between pipes in multi-head configurations.

It's also necessary infrastructure to support things like framebuffer
compression and configuration supportability checks (i.e. checking a
configuration against available bandwidth).

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agodrm/i915: enable error detection & state collection
Jesse Barnes [Thu, 18 Jun 2009 23:56:52 +0000 (16:56 -0700)]
drm/i915: enable error detection & state collection

This patch enables error detection by enabling several types of error
interrupts.  When an error interrupt is received, the interrupt
handler captures the error state; hopefully resulting in an accurate
set of error data (error type, active head pointer, etc.).  The new
record is then available from sysfs.  The current code will also dump
the error state to the system log.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
15 years agoMerge branch 'kmemleak' of git://linux-arm.org/linux-2.6
Linus Torvalds [Wed, 1 Jul 2009 02:04:53 +0000 (19:04 -0700)]
Merge branch 'kmemleak' of git://linux-arm.org/linux-2.6

* 'kmemleak' of git://linux-arm.org/linux-2.6:
  kmemleak: Inform kmemleak about pid_hash
  kmemleak: Do not warn if an unknown object is freed
  kmemleak: Do not report new leaked objects if the scanning was stopped
  kmemleak: Slightly change the policy on newly allocated objects
  kmemleak: Do not trigger a scan when reading the debug/kmemleak file
  kmemleak: Simplify the reports logged by the scanning thread
  kmemleak: Enable task stacks scanning by default
  kmemleak: Allow the early log buffer to be configurable.

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm
Linus Torvalds [Wed, 1 Jul 2009 02:04:14 +0000 (19:04 -0700)]
Merge git://git./linux/kernel/git/agk/linux-2.6-dm

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm table: fix blk_stack_limits arg to use bytes not sectors
  dm exception store: really fix type lookup

15 years agoMerge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux...
Linus Torvalds [Wed, 1 Jul 2009 02:02:59 +0000 (19:02 -0700)]
Merge branch 'perfcounters-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (47 commits)
  perf report: Add --symbols parameter
  perf report: Add --comms parameter
  perf report: Add --dsos parameter
  perf_counter tools: Adjust only prelinked symbol's addresses
  perf_counter: Provide a way to enable counters on exec
  perf_counter tools: Reduce perf stat measurement overhead/skew
  perf stat: Use percentages for scaling output
  perf_counter, x86: Update x86_pmu after WARN()
  perf stat: Micro-optimize the code: memcpy is only required if no event is selected and !null_run
  perf stat: Improve output
  perf stat: Fix multi-run stats
  perf stat: Add -n/--null option to run without counters
  perf_counter tools: Remove dead code
  perf_counter: Complete counter swap
  perf report: Print sorted callchains per histogram entries
  perf_counter tools: Prepare a small callchain framework
  perf record: Fix unhandled io return value
  perf_counter tools: Add alias for 'l1d' and 'l1i'
  perf-report: Add bare minimum PERF_EVENT_READ parsing
  perf-report: Add modes for inherited stats and no-samples
  ...

15 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Wed, 1 Jul 2009 02:01:52 +0000 (19:01 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  Add Fenghua Yu as temporary co-maintainer for ia64
  [IA64] address compiler warnings perfmon.c/salinfo.c
  [IA64] Remove unnecessary semicolons
  [IA64] sprintf should not be used with same source & destination address

15 years agoMN10300: Wire up new syscalls
David Howells [Tue, 30 Jun 2009 21:33:15 +0000 (22:33 +0100)]
MN10300: Wire up new syscalls

Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoFRV: Wire up new syscalls
David Howells [Tue, 30 Jun 2009 21:24:54 +0000 (22:24 +0100)]
FRV: Wire up new syscalls

Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agohostfs: set maximum filesize in superblock for proper LFS support
Wolfgang Illmeyer [Tue, 30 Jun 2009 18:41:44 +0000 (11:41 -0700)]
hostfs: set maximum filesize in superblock for proper LFS support

Maximum file size for hostfs mounts defaults to 2GB, so bigger files cannot be
read/written through hostfs. This patch initializes the maximum file size to
MAX_LFS_SIZE.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13531

Signed-off-by: Wolfgang Illmeyer <wolfgang@illmeyer.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agofloppy: fix lock imbalance
Jiri Slaby [Tue, 30 Jun 2009 18:41:44 +0000 (11:41 -0700)]
floppy: fix lock imbalance

A crappy macro prevents us unlocking on a fail path.

Expand the macro and unlock appropriatelly.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agobfin: delay IRQ registration until driver is ready
Mike Frysinger [Tue, 30 Jun 2009 18:41:43 +0000 (11:41 -0700)]
bfin: delay IRQ registration until driver is ready

Make sure we do not actually request the RTC IRQ until the device driver
is fully ready to handle and process any interrupt.  This way a spurious
interrupt won't crash the system (which may happen if the bootloader was
poking the RTC right before booting Linux).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoatyfb: fix alignment for block writes
Ville Syrjala [Tue, 30 Jun 2009 18:41:42 +0000 (11:41 -0700)]
atyfb: fix alignment for block writes

Block writes require 64 byte alignment.  Since block writes could be used
with SGRAM or WRAM also refine the memory type detection to check for
either type before deciding to use the 64 byte alignment.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoatyfb: fix HP OmniBook 500 reboot hang
Ville Syrjala [Tue, 30 Jun 2009 18:41:40 +0000 (11:41 -0700)]
atyfb: fix HP OmniBook 500 reboot hang

Apparently HP OmniBook 500's BIOS doesn't like the way atyfb reprograms
the hardware. The BIOS will simply hang after a reboot. Fix the problem
by restoring the hardware to it's original state on reboot.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agogpio: pl061: fix IRQ handling for GPIOs >= PL061_GPIO_NR
Baruch Siach [Tue, 30 Jun 2009 18:41:39 +0000 (11:41 -0700)]
gpio: pl061: fix IRQ handling for GPIOs >= PL061_GPIO_NR

IRQ handling is wrong for any GPIO >= PL061_GPIO_NR.

Fix this by implementing and using a proper .to_irq method.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agogpio: pl061: fix probe error handling code
Baruch Siach [Tue, 30 Jun 2009 18:41:38 +0000 (11:41 -0700)]
gpio: pl061: fix probe error handling code

Note that IRQ has not been initialized when kmalloc() fails.

Also, use DECLARE_BITMAP() to make the code clearer.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agox86: only clear node_states for 64bit
Yinghai Lu [Tue, 30 Jun 2009 18:41:37 +0000 (11:41 -0700)]
x86: only clear node_states for 64bit

Nathan reported that

| commit 73d60b7f747176dbdff826c4127d22e1fd3f9f74
| Author: Yinghai Lu <yinghai@kernel.org>
| Date:   Tue Jun 16 15:33:00 2009 -0700
|
|    page-allocator: clear N_HIGH_MEMORY map before we set it again
|
|    SRAT tables may contains nodes of very small size.  The arch code may
|    decide to not activate such a node.  However, currently the early boot
|    code sets N_HIGH_MEMORY for such nodes.  These nodes therefore seem to be
|    active although these nodes have no present pages.
|
|    For 64bit N_HIGH_MEMORY == N_NORMAL_MEMORY, so that works for 64 bit too

unintentionally and incorrectly clears the cpuset.mems cgroup attribute on
an i386 kvm guest, meaning that cpuset.mems can not be used.

Fix this by only clearing node_states[N_NORMAL_MEMORY] for 64bit only.
and need to do save/restore for that in find_zone_movable_pfn

Reported-by: Nathan Lynch <ntl@pobox.com>
Tested-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>,
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agocpusets: document adding/removing cpus to cpuset elaborately
Nikanth Karthikesan [Tue, 30 Jun 2009 18:41:36 +0000 (11:41 -0700)]
cpusets: document adding/removing cpus to cpuset elaborately

By writing a tasks's pid to the file, a process adds that task to that
cgroup/cpuset.  But to add a cpu/mem to a cpuset, the new list of cpus
should be written to the cpuset.mems file which would replace the old list
of cpus.  Make this clearer in the documentation.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agomm: prevent balance_dirty_pages() from doing too much work
Richard Kennedy [Tue, 30 Jun 2009 18:41:35 +0000 (11:41 -0700)]
mm: prevent balance_dirty_pages() from doing too much work

balance_dirty_pages can overreact and move all of the dirty pages to
writeback unnecessarily.

balance_dirty_pages makes its decision to throttle based on the number of
dirty plus writeback pages that are over the calculated limit,so it will
continue to move pages even when there are plenty of pages in writeback
and less than the threshold still dirty.

This allows it to overshoot its limits and move all the dirty pages to
writeback while waiting for the drives to catch up and empty the writeback
list.

A simple fio test easily demonstrates this problem.

fio --name=f1 --directory=/disk1 --size=2G -rw=write --name=f2 --directory=/disk2 --size=1G --rw=write --startdelay=10

This is the simplest fix I could find, but I'm not entirely sure that it
alone will be enough for all cases.  But it certainly is an improvement on
my desktop machine writing to 2 disks.

Do we need something more for machines with large arrays where
bdi_threshold * number_of_drives is greater than the dirty_ratio ?

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agobsdacct: fix access to invalid filp in acct_on()
Renaud Lottiaux [Tue, 30 Jun 2009 18:41:34 +0000 (11:41 -0700)]
bsdacct: fix access to invalid filp in acct_on()

The file opened in acct_on and freshly stored in the ns->bacct struct can
be closed in acct_file_reopen by a concurrent call after we release
acct_lock and before we call mntput(file->f_path.mnt).

Record file->f_path.mnt in a local variable and use this variable only.

Signed-off-by: Renaud Lottiaux <renaud.lottiaux@kerlabs.com>
Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMAINTAINERS: STARFIRE/DURALAN update
Joe Perches [Tue, 30 Jun 2009 18:41:32 +0000 (11:41 -0700)]
MAINTAINERS: STARFIRE/DURALAN update

Ion's cs.columbia.edu email address no longer works.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Ion Badulescu <ionut@badula.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agokernel/resource.c: fix sign extension in reserve_setup()
Zhang Rui [Tue, 30 Jun 2009 18:41:31 +0000 (11:41 -0700)]
kernel/resource.c: fix sign extension in reserve_setup()

When the 32-bit signed quantities get assigned to the u64 resource_size_t,
they are incorrectly sign-extended.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13253
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=9905

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reported-by: Leann Ogasawara <leann@ubuntu.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Reported-by: <pablomme@googlemail.com>
Tested-by: <pablomme@googlemail.com>
Cc: <stable@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agospi: bitbang bugfix in message setup
David Brownell [Tue, 30 Jun 2009 18:41:30 +0000 (11:41 -0700)]
spi: bitbang bugfix in message setup

Bugfix to spi_bitbang infrastructure: make sure to always set transfer
parameters on the first pass through the message's per-transfer loop.
This can matter with drivers that replace the per-word or per-buffer
transfer primitives, on busses with multiple SPI devices.

Previously, this could have started messages using the settings left after
previous messages.  The problem was observed when a high speed chip
(m25p80 type flash) was running very slowly because a low speed device
(avr8 microcontroller) had previously used the bus.  Similar faults could
have driven the low speed device too fast, or used an unexpected word
size.

Acked-by: Steven A. Falco <sfalco@harris.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agofbdev: add mutex for fb_mmap locking
Krzysztof Helt [Tue, 30 Jun 2009 18:41:29 +0000 (11:41 -0700)]
fbdev: add mutex for fb_mmap locking

Add a mutex to avoid a circular locking problem between the mm layer
semaphore and fbdev ioctl mutex through the fb_mmap() call.

Also, add mutex to all places where smem_start and smem_len fields change
so the mutex inside the fb_mmap() is actually used.  Changing of these
fields before calling the framebuffer_register() are not mutexed.

This is 2.6.31 material.  It removes one lockdep (fb_mmap() and
register_framebuffer()) but there is still another one (fb_release() and
register_framebuffer()).  It also cleans up handling of the smem_start and
smem_len fields used by mutexed section of the fb_mmap().

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agospi: add spi_master flag word
David Brownell [Tue, 30 Jun 2009 18:41:27 +0000 (11:41 -0700)]
spi: add spi_master flag word

Add a new spi_master.flags word listing constraints relevant to that
controller.  Define the first constraint bit: a half duplex restriction.
Include that constraint in the OMAP1 MicroWire controller driver.

Have the mmc_spi host be the first customer of this flag.  Its coding
relies heavily on full duplex transfers, so it must fail when the
underlying controller driver won't perform them.

(The spi_write_then_read routine could use it too: use the
temporarily-withdrawn full-duplex speedup unless this flag is set, in
which case the existing code applies.  Similarly, any spi_master
implementing only SPI_3WIRE should set the flag.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agospi: new spi->mode bits
David Brownell [Tue, 30 Jun 2009 18:41:26 +0000 (11:41 -0700)]
spi: new spi->mode bits

Add two new spi_device.mode bits to accomodate more protocol options, and
pass them through to usermode drivers:

 * SPI_NO_CS ... a second 3-wire variant, where the chipselect
   line is removed instead of a data line; transfers are still
   full duplex.

   This obviously has STRONG protocol implications since the
   chipselect transitions can't be used to synchronize state
   transitions with the SPI master.

 * SPI_READY ... defines open drain signal that's pulled low
   to pause the clock.  This defines a 5-wire variant (normal
   4-wire SPI plus READY) and two 4-wire variants (READY plus
   each of the 3-wire flavors).

   Such hardware flow control can be a big win.  There are ADC
   converters and flash chips that expose READY signals, but not
   many host controllers support it today.

The spi_bitbang code should be changed to use SPI_NO_CS instead of its
current nonportable hack.  That's a mode most hardware can easily support
(unlike SPI_READY).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: "Paulraj, Sandeep" <s-paulraj@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agodmapools: protect page_list walk in show_pools()
Thomas Gleixner [Tue, 30 Jun 2009 18:41:25 +0000 (11:41 -0700)]
dmapools: protect page_list walk in show_pools()

show_pools() walks the page_list of a pool w/o protection against the list
modifications in alloc/free.  Take pool->lock to avoid stomping into
nirvana.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoext2: return -EIO not -ESTALE on directory traversal through deleted inode
Bryan Donlan [Tue, 30 Jun 2009 18:41:24 +0000 (11:41 -0700)]
ext2: return -EIO not -ESTALE on directory traversal through deleted inode

ext2_iget() returns -ESTALE if invoked on a deleted inode, in order to
report errors to NFS properly.  However, in ext[234]_lookup(), this
-ESTALE can be propagated to userspace if the filesystem is corrupted such
that a directory entry references a deleted inode.  This leads to a
misleading error message - "Stale NFS file handle" - and confusion on the
part of the admin.

The bug can be easily reproduced by creating a new filesystem, making a
link to an unused inode using debugfs, then mounting and attempting to ls
-l said link.

This patch thus changes ext2_lookup to return -EIO if it receives -ESTALE
from ext2_iget(), as ext2 does for other filesystem metadata corruption;
and also invokes the appropriate ext*_error functions when this case is
detected.

Signed-off-by: Bryan Donlan <bdonlan@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoelf: limit max map count to safe value
KAMEZAWA Hiroyuki [Tue, 30 Jun 2009 18:41:23 +0000 (11:41 -0700)]
elf: limit max map count to safe value

With ELF, at generating coredump, some more headers other than used
vmas are added.

When max_map_count == 65536, a core generated by following kinds of
code can be unreadable because the number of ELF's program header is
written in 16bit in Ehdr (please see elf.h) and the number overflows.

==
... = mmap(); (munmap, mprotect, etc...)
if (failed)
abort();
==

This can happen in mmap/munmap/mprotect/etc...which calls split_vma().

I think 65536 is not safe as _default_ and reduce it to 65530 is good
for avoiding unexpected corrupted core.

Anyway, max_map_count can be enlarged by sysctl if a user is brave..

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Jakub Jelinek <jakub@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoedac: add DDR3 memory type for MPC85xx EDAC
Yang Shi [Tue, 30 Jun 2009 18:41:22 +0000 (11:41 -0700)]
edac: add DDR3 memory type for MPC85xx EDAC

Since some new MPC85xx SOCs support DDR3 memory now, so add DDR3 memory
type for MPC85xx EDAC.

Signed-off-by: Yang Shi <yang.shi@windriver.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoparport/serial: add support for NetMos 9901 Multi-IO card
Michael Buesch [Tue, 30 Jun 2009 18:41:21 +0000 (11:41 -0700)]
parport/serial: add support for NetMos 9901 Multi-IO card

Add support for the PCI-Express NetMos 9901 Multi-IO card.

0001:06:00.0 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550])
        Subsystem: Device [a000:1000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 65
        Region 0: I/O ports at 0030 [size=8]
        Region 1: Memory at 80105000 (32-bit, non-prefetchable) [size=4K]
        Region 4: Memory at 80104000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: serial
        Kernel modules: 8250_pci

0001:06:00.1 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550])
        Subsystem: Device [a000:1000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 65
        Region 0: I/O ports at 0020 [size=8]
        Region 1: Memory at 80103000 (32-bit, non-prefetchable) [size=4K]
        Region 4: Memory at 80102000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: serial
        Kernel modules: 8250_pci

0001:06:00.2 Parallel controller [0701]: NetMos Technology Device [9710:9901] (prog-if 03 [IEEE1284])
        Subsystem: Device [a000:2000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 65
        Region 0: I/O ports at 0010 [size=8]
        Region 1: I/O ports at <unassigned>
        Region 2: Memory at 80101000 (32-bit, non-prefetchable) [size=4K]
        Region 4: Memory at 80100000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: parport_pc
        Kernel modules: parport_pc

[   16.760181] PCI parallel port detected: 416c:0100, I/O at 0x812010(0x0), IRQ 65
[   16.760225] parport0: PC-style at 0x812010, irq 65 [PCSPP,TRISTATE,EPP]
[   16.851842] serial 0001:06:00.0: enabling device (0004 -> 0007)
[   16.883776] 0001:06:00.0: ttyS0 at I/O 0x812030 (irq = 65) is a ST16650V2
[   16.893832] serial 0001:06:00.1: enabling device (0004 -> 0007)
[   16.926537] 0001:06:00.1: ttyS1 at I/O 0x812020 (irq = 65) is a ST16650V2

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agogcov: fix documentation
Peter Oberparleiter [Tue, 30 Jun 2009 18:41:20 +0000 (11:41 -0700)]
gcov: fix documentation

Commonly available versions of cp and tar don't work well with special
files created using seq_file.  Mention this problem in the gcov
documentation and update the helper script example to work around these
problems.

Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoalpha: fix percpu build breakage
Tejun Heo [Tue, 30 Jun 2009 18:41:18 +0000 (11:41 -0700)]
alpha: fix percpu build breakage

alpha percpu access requires custom SHIFT_PERCPU_PTR() definition for
modules to work around addressing range limitation.  This is done via
generating inline assembly using C preprocessing which forces the
assembler to generate external reference.  This happens behind the
compiler's back and makes the compiler think that static percpu variables
in modules are unused.

This used to be worked around by using __unused attribute for percpu
variables which prevent the compiler from omitting the variable; however,
recent declare/definition attribute unification change broke this as
__used can't be used for declaration.  Also, in the process,
PER_CPU_ATTRIBUTES definition in alpha percpu.h got broken.

This patch adds PER_CPU_DEF_ATTRIBUTES which is only used for definitions
and make alpha use it to add __used for percpu variables in modules.  This
also fixes the PER_CPU_ATTRIBUTES double definition bug.

Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: maximilian attems <max@stro.at>
Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agofbdev: work around old compiler bug
Stephen Rothwell [Tue, 30 Jun 2009 18:41:15 +0000 (11:41 -0700)]
fbdev: work around old compiler bug

When building with a 4.1.x compiler on powerpc64 (at least) we get this
error:

drivers/video/logo/logo_linux_mono.c:81: error: logo_linux_mono causes a section type conflict

This was introduced by commit ae52bb2384f721562f15f719de1acb8e934733cb
("fbdev: move logo externs to header file").  This is a partial revert of
that commit sufficient to not hit the compiler bug.

Also convert _clut arrays from __initconst to __initdata.

Sam said:

  Al analysed this some time ago.  When we say something is const then
  _sometimes_ gcc annotate the section as const(?) - sometimes not.  So if
  we have two variables/functions annotated __*const and gcc decides to
  annotate the section const only in one case we get a section type
  conflict.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMAINTAINERS: update EDAC-I82975X
Joe Perches [Tue, 30 Jun 2009 18:41:13 +0000 (11:41 -0700)]
MAINTAINERS: update EDAC-I82975X

As per Ranganathan's request.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: Arvind R. <arvind@jetztechnologies.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agogcov: fix __ctors_start alignment
Heiko Carstens [Tue, 30 Jun 2009 18:41:13 +0000 (11:41 -0700)]
gcov: fix __ctors_start alignment

The ctors section for each object file is eight byte aligned (on 64 bit).
However the __ctors_start symbol starts at an arbitrary address dependent
on the size of the previous sections.

Therefore the linker may add some zeroes after __ctors_start to make sure
the ctors contents are properly aligned.  However the extra zeroes at the
beginning aren't expected by the code.  When walking the functions
pointers contained in there and extra zeroes are added this may result in
random jumps.  So make sure that the __ctors_start symbol is always
aligned as well.

Fixes this crash on an allyesconfig on s390:

[    0.582482] Kernel BUG at 0000000000000012 [verbose debug info unavailable]
[    0.582489] illegal operation: 0001 [#1] SMP DEBUG_PAGEALLOC
[    0.582496] Modules linked in:
[    0.582501] CPU: 0 Tainted: G        W  2.6.31-rc1-dirty #273
[    0.582506] Process swapper (pid: 1, task: 000000003f218000, ksp: 000000003f2238e8)
[    0.582510] Krnl PSW : 0704200180000000 0000000000000012 (0x12)
[    0.582518]            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3
[    0.582524] Krnl GPRS: 0000000000036727 0000000000000010 0000000000000001 0000000000000001
[    0.582529]            00000000001dfefa 0000000000000000 0000000000000000 0000000000000040
[    0.582534]            0000000001fff0f0 0000000001790628 0000000002296048 0000000002296048
[    0.582540]            00000000020c438e 0000000001786000 0000000002014a66 000000003f223e60
[    0.582553] Krnl Code:>0000000000000012: 0000                unknown
[    0.582559]            0000000000000014: 0000                unknown
[    0.582564]            0000000000000016: 0000                unknown
[    0.582570]            0000000000000018: 0000                unknown
[    0.582575]            000000000000001a: 0000                unknown
[    0.582580]            000000000000001c: 0000                unknown
[    0.582585]            000000000000001e: 0000                unknown
[    0.582591]            0000000000000020: 0000                unknown
[    0.582596] Call Trace:
[    0.582599] ([<0000000002014a46>] kernel_init+0x622/0x7a0)
[    0.582607]  [<0000000000113e22>] kernel_thread_starter+0x6/0xc
[    0.582615]  [<0000000000113e1c>] kernel_thread_starter+0x0/0xc
[    0.582621] INFO: lockdep is turned off.
[    0.582624] Last Breaking-Event-Address:
[    0.582627]  [<0000000002014a64>] kernel_init+0x640/0x7a0

Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoeventfd: revised interface and cleanups
Davide Libenzi [Tue, 30 Jun 2009 18:41:11 +0000 (11:41 -0700)]
eventfd: revised interface and cleanups

Change the eventfd interface to de-couple the eventfd memory context, from
the file pointer instance.

Without such change, there is no clean way to racely free handle the
POLLHUP event sent when the last instance of the file* goes away.  Also,
now the internal eventfd APIs are using the eventfd context instead of the
file*.

This patch is required by KVM's IRQfd code, which is still under
development.

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Gregory Haskins <ghaskins@novell.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoperf report: Add --symbols parameter
Arnaldo Carvalho de Melo [Tue, 30 Jun 2009 22:01:22 +0000 (19:01 -0300)]
perf report: Add --symbols parameter

So that we can filter by symbol name.

The 'pfunct' utility in the 'dwarves' package can be used to
create a file with the functions one wants.

Example:

[acme@doppio pahole]$ pfunct /usr/lib/debug/usr/lib64/libdw-0.141.so.debug | grep dwarf > /tmp/dwarf.symbols
[acme@doppio pahole]$ wc -l /tmp/dwarf.symbols
93 /tmp/dwarf.symbols
[acme@doppio pahole]$ head -3 /tmp/dwarf.symbols
dwfl_addrdwarf
dwfl_module_getdwarf
dwfl_getdwarf
[acme@doppio pahole]$ perf report --sort comm,dso,symbol --comms pahole --dsos /usr/lib64/libdw-0.141.so --symbols file:///tmp/dwarf.symbols

    33.99%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_tag
    29.07%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_decl_file
    27.71%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_getsrclines
     4.54%            pahole  /usr/lib64/libdw-0.141.so  0x00000000007400
     3.93%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_decl_line
     0.46%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_getlocation
     0.18%            pahole  /usr/lib64/libdw-0.141.so  [.] __libdwarf_next_prime
     0.13%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_diecu

[acme@doppio pahole]$

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246399282-20934-4-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Add --comms parameter
Arnaldo Carvalho de Melo [Tue, 30 Jun 2009 22:01:21 +0000 (19:01 -0300)]
perf report: Add --comms parameter

So that we can filter by comm. Symbols in other comms won't be
accounted for.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246399282-20934-3-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Add --dsos parameter
Arnaldo Carvalho de Melo [Tue, 30 Jun 2009 22:01:20 +0000 (19:01 -0300)]
perf report: Add --dsos parameter

So that we can filter by dso. Symbols in other dsos won't be
accounted for.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246399282-20934-2-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoAdd Fenghua Yu as temporary co-maintainer for ia64
Tony Luck [Tue, 30 Jun 2009 21:28:54 +0000 (14:28 -0700)]
Add Fenghua Yu as temporary co-maintainer for ia64

I'm taking my sabbatical from Intel for July/August 2009.
Fenghua Yu will handle ia64 architecture while I'm gone.

Signed-off-by: Tony Luck <tony.luck@intel.com>
15 years ago[IA64] address compiler warnings perfmon.c/salinfo.c
Jan Beulich [Tue, 30 Jun 2009 11:01:57 +0000 (12:01 +0100)]
[IA64] address compiler warnings perfmon.c/salinfo.c

perfmon.c has a dubious cast directly from "int" to "void *". Add
an intermediate cast to "long" to keep gcc happy.

salinfo.c uses "down_trylock()" in a highly creative way (explained
in the comments in the file) ... but it does kick out this warning:

 arch/ia64/kernel/salinfo.c:195: warning: ignoring return value of 'down_trylock'

which people occasionally try to "fix" in ways that do not work. Use some
casts to keep gcc quiet.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
15 years ago[IA64] Remove unnecessary semicolons
Joe Perches [Sun, 28 Jun 2009 16:26:07 +0000 (09:26 -0700)]
[IA64] Remove unnecessary semicolons

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
15 years ago[IA64] sprintf should not be used with same source & destination address
Alan Cox [Tue, 30 Jun 2009 21:02:00 +0000 (14:02 -0700)]
[IA64] sprintf should not be used with same source & destination address

This happens to work at the moment but isn't a good idea so fix it the
simple way.

Resolves-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13576

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
15 years agoAFS: Fix lock imbalance
Jiri Slaby [Tue, 30 Jun 2009 20:10:13 +0000 (21:10 +0100)]
AFS: Fix lock imbalance

Don't unlock on vfs_rejected_lock path in afs_do_setlk, since the lock
is unlocked after abort_attempt label.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoperf_counter tools: Adjust only prelinked symbol's addresses
Arnaldo Carvalho de Melo [Tue, 30 Jun 2009 14:43:17 +0000 (11:43 -0300)]
perf_counter tools: Adjust only prelinked symbol's addresses

I.e. we can't handle these two kinds of files in the same way:

1) prelinked system library:

[acme@doppio pahole]$ readelf -s /usr/lib64/libdw-0.141.so | egrep 'FUNC.+GLOBAL.+dwfl_report_elf'
   278: 00000030450105a0   261 FUNC    GLOBAL DEFAULT   12 dwfl_report_elf@@ELFUTILS_0.122

2) not prelinked library with debug information from a -debuginfo package:

[acme@doppio pahole]$ readelf -s /usr/lib/debug/usr/lib64/libdw-0.141.so.debug | egrep 'FUNC.+GLOBAL.+dwfl_report_elf'
   629: 00000000000105a0   261 FUNC    GLOBAL DEFAULT   12 dwfl_report_elf
[acme@doppio pahole]$

Now the numbers I got for a pahole perf run are in line with
the numbers I get from oprofile.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090630144317.GB12663@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agodm table: fix blk_stack_limits arg to use bytes not sectors
Mike Snitzer [Tue, 30 Jun 2009 14:18:17 +0000 (15:18 +0100)]
dm table: fix blk_stack_limits arg to use bytes not sectors

The offset passed to blk_stack_limits() must be in bytes not sectors.
Fixes false warnings like the following:
device-mapper: table: 254:1: target device sda6 is misaligned

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reported-by: Frans Pop <elendil@planet.nl>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
15 years agodm exception store: really fix type lookup
Milan Broz [Tue, 30 Jun 2009 14:18:14 +0000 (15:18 +0100)]
dm exception store: really fix type lookup

Fix exception store name handling.

We need to reference exception store by zero terminated string.

Fixes regression introduced in commit f6bd4eb73cdf2a5bf954e497972842f39cabb7e3

Cc: Yi Yang <yi.y.yang@intel.com>
Cc: Jonathan Brassow <jbrassow@redhat.com>
Cc: stable@kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
15 years agoperf_counter: Provide a way to enable counters on exec
Paul Mackerras [Tue, 30 Jun 2009 06:07:19 +0000 (16:07 +1000)]
perf_counter: Provide a way to enable counters on exec

This provides a way to mark a counter to be enabled on the next
exec. This is useful for measuring the total activity of a
program without including overhead from the process that
launches it.

This also changes the perf stat command to use this new
facility.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <19017.43927.838745.689203@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
Linus Torvalds [Tue, 30 Jun 2009 03:07:43 +0000 (20:07 -0700)]
Merge git://git./linux/kernel/git/davem/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  ide: memory overrun in ide_get_identity_ioctl() on big endian machines using ioctl HDIO_OBSOLETE_IDENTITY
  ide: fix resume for CONFIG_BLK_DEV_IDEACPI=y
  ide-cd: handle fragmented packet commands gracefully
  ide: always kill the whole request on error
  ide: fix ide_kill_rq() for special ide-{floppy,tape} driver requests

15 years agoide: memory overrun in ide_get_identity_ioctl() on big endian machines using ioctl...
Christian Engelmayer [Tue, 30 Jun 2009 02:31:41 +0000 (19:31 -0700)]
ide: memory overrun in ide_get_identity_ioctl() on big endian machines using ioctl HDIO_OBSOLETE_IDENTITY

This patch fixes a memory overrun in function ide_get_identity_ioctl() which
chooses the size of a memory buffer depending on the ioctl command that led
to the function call, however, passes that buffer to a function which needs the
buffer size to be always chosen unconditionally.

Due to conditional compilation the memory overrun can only happen on big endian
machines. The error can be triggered using ioctl HDIO_OBSOLETE_IDENTITY. Usage
of ioctl HDIO_GET_IDENTITY is safe.

Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoide: fix resume for CONFIG_BLK_DEV_IDEACPI=y
Bartlomiej Zolnierkiewicz [Tue, 30 Jun 2009 02:20:42 +0000 (19:20 -0700)]
ide: fix resume for CONFIG_BLK_DEV_IDEACPI=y

commit 2f0d0fd2a605666d38e290c5c0d2907484352dc4 ("ide-acpi: cleanup
do_drive_get_GTF()") didn't account for the lack of hwif->acpidata
check in generic_ide_suspend() [ indirect user of do_drive_get_GTF()
through ide_acpi_exec_tfs() ] resulting in broken resume when ACPI
support is enabled but ACPI data is unavailable.

Fix it by adding ide_port_acpi() helper for checking if port needs
ACPI handling and cleaning generic_ide_{suspend,resume}() to use it
instead of hiding hwif->acpidata and ide_noacpi checks in IDE ACPI
helpers (this should help in preventing similar bugs in the future).

While at it:
- kill superfluous debugging printks in ide_acpi_{get,push}_timing()

Reported-and-tested-by: Etienne Basset <etienne.basset@numericable.fr>
Also-reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 29 Jun 2009 23:18:19 +0000 (16:18 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits)
  [ARM] 5562/2: at91: add gpio button support for at91sam9g20ek
  [ARM] 5563/1: at91: at91sam9rlek lcd interface correction
  [ARM] 5565/2: Use PAGE_SIZE and RO_DATA() in link script
  [ARM] 5560/1: Avoid buffer overrun in case of an invalid IRQ
  [ARM] GTA02: build fixes (s3c2410_nand_set usage)
  [ARM] MINI2440: Add missing flash_bbt flat to NAND
  [ARM] s3c2410_defconfig: add MINI2440 machine to build
  [ARM] S3C: Fix S3C24XX build to not include s3c64xx IIS devices
  [ARM] S3C24XX: Fix missing s3c_iis_device.
  [ARM] MINI2440: remove duplicated #include
  [ARM] S3C24XX: Fix spi-bus configuration build errors
  OMAP: Fix IOMEM macro for assembly
  [ARM] S3C: Remove unused CONFIG_DEBUG_S3C_PORT
  [ARM] S3C24XX: Fix use of CONFIG_S3C24XX_PWM
  OMAP2/3: Initialize gpio debounce register
  OMAP: IOMMU: function flush_iotlb_page is not flushing correct entry
  OMAP3: RX51: Use OneNAND sync read / write
  OMAP2/3: gpmc-onenand: correct use of async timings
  OMAP3: DMA: Enable idlemodes for DMA OCP
  OMAP3: SRAM size fix for HS/EMU devices
  ...

15 years agoperf_counter tools: Reduce perf stat measurement overhead/skew
Paul Mackerras [Mon, 29 Jun 2009 11:13:21 +0000 (21:13 +1000)]
perf_counter tools: Reduce perf stat measurement overhead/skew

Vince Weaver reported a 'perf stat' measurement overhead in the
count of retired instructions, which can amount to a +6000
instructions inflated count in the reported count.

At present, perf stat creates its counters on the perf process.  Thus
the counters count the fork and various other activity in both the
parent and child, such as the resolver overhead for resolving PLT
entries for any libc functions that haven't been called before, such
as execvp.

This reduces the overhead by creating the counters on the child process
after the fork, using a couple of pipes to synchronize so that the
child process waits until the parent has created the counters before
doing the exec.  To eliminate the PLT resolution overhead on calling
execvp, this does a dummy execvp first which will always fail.

With this, the overhead of executing a program goes down from over
4800 instructions to about 90 instructions on powerpc (32-bit).
This was measured with a statically-linked program written in
assembler which only does the 3 instructions needed to call _exit(0).

Before:

$ perf stat -e 0:1:u ./three

 Performance counter stats for './three':

           4858  instructions

    0.001274523  seconds time elapsed

After:

$ perf stat -e 0:1:u ./three

 Performance counter stats for './three':

             92  instructions

    0.000468153  seconds time elapsed

Reported-by: Vince Weaver <vince@deater.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoMerge branch 'for-linus' of git://git.infradead.org/users/eparis/notify
Linus Torvalds [Mon, 29 Jun 2009 20:09:39 +0000 (13:09 -0700)]
Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notify

* 'for-linus' of git://git.infradead.org/users/eparis/notify:
  fs: allow d_instantiate to be called with negative parent dentry

15 years agoperf stat: Use percentages for scaling output
Ingo Molnar [Mon, 29 Jun 2009 19:50:54 +0000 (21:50 +0200)]
perf stat: Use percentages for scaling output

Peter expressed a strong preference for percentage based
display of scaled values - so revert to that from the
recently introduced multiplication-factor unit.

Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Mon, 29 Jun 2009 16:46:12 +0000 (09:46 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  sound: OSS: mpu401, fix deadlock
  ALSA: hda - Add missing initializations for ALC268 and ALC269
  ALSA: cmi8330: fix MPU-401 PnP init copy&paste bug
  ALSA: hda - Line In for Acer Inspire 6530G model
  sound: oxygen: make mic volume control mono
  MAINTAINERS: Add entry for twl4030 series soc codec driver
  ALSA: lx6464es - configure ethersound io channels
  sound: Use PCI_VDEVICE for CREATIVE and ECTIVA
  sound: Use PCI_VDEVICE
  ALSA: hda - Use model=acer-aspire-6530g for Acer Aspire 6930G
  ALSA: hda - Fix acer-aspire-6530g model quirk
  ALSA: hda - Add pin-sense trigger when needed for Realtek codecs
  ALSA: hda - Fix support for Samsung P50 with AD1986A codec
  ALSA: hda - Generalize the pin-detect quirk for Lenovo N100
  ALSA: hda - Simplify AD1986A mixer definitions

15 years agoMerge branch 'bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Mon, 29 Jun 2009 16:44:44 +0000 (09:44 -0700)]
Merge branch 'bugfixes' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  integrity: add ima_counts_put (updated)
  integrity: ima audit hash_exists fix
  integrity: ima mq_open imbalance msg fix

15 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 29 Jun 2009 16:42:01 +0000 (09:42 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  Revert "x86: cap iomem_resource to addressable physical memory"

15 years agoMerge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight
Linus Torvalds [Mon, 29 Jun 2009 16:41:12 +0000 (09:41 -0700)]
Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  backlight: Fix tdo24m crash on kmalloc

15 years agoeeepc-laptop: Fix build failure with HOTPLUG_PCI && !SYSFS
Ingo Molnar [Mon, 29 Jun 2009 08:07:54 +0000 (10:07 +0200)]
eeepc-laptop: Fix build failure with HOTPLUG_PCI && !SYSFS

FYI, there's a post-rc1 build regression with certain configs:

 drivers/built-in.o: In function `pci_hp_deregister':
 (.text+0xb166): undefined reference to `pci_hp_remove_module_link'
 drivers/built-in.o: In function `pci_hp_deregister':
 (.text+0xb19f): undefined reference to `pci_destroy_slot'
 drivers/built-in.o: In function `__pci_hp_register':
 (.text+0xb583): undefined reference to `pci_create_slot'
 drivers/built-in.o: In function `__pci_hp_register':
 (.text+0xb5b1): undefined reference to `pci_hp_create_module_link'
 make: *** [.tmp_vmlinux1] Error 1

Caused by:

2b121bc262fa03c94e653b2d44356c2f86c1bcdc is first bad commit
| commit 2b121bc262fa03c94e653b2d44356c2f86c1bcdc
| Date:   Thu Jun 25 13:25:36 2009 +0200
|
|     eeepc-laptop: Register as a pci-hotplug device

which changed the driver to use the PCI hotplug infrastructure, but
didn't do a good job on the Kconfig rules.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agotty: Fix the leak in tty_ldisc_release
Alan Cox [Mon, 29 Jun 2009 14:21:47 +0000 (15:21 +0100)]
tty: Fix the leak in tty_ldisc_release

Currently we reinit the ldisc on final tty close which is what the old code
did to ensure that if the device retained its termios settings then it had the
right ldisc. tty_ldisc_reinit does that but also leaves us with the reset
ldisc reference which is then leaked.

At this point we know the port will be recycled so we can kill the ldisc
off completely rather than try and add another ldisc free up when the kref
count hits zero.

At this point it is safe to keep the ldisc closed as tty_ldisc waiting
methods are only used from the user side, and as the final close we are
the last such reference. Interrupt/driver side methods will always use the
non wait version and get back a NULL.

Found with kmemleak and investigated/identified by Catalin Marinas.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agokmemleak: Inform kmemleak about pid_hash
Catalin Marinas [Mon, 29 Jun 2009 16:13:55 +0000 (17:13 +0100)]
kmemleak: Inform kmemleak about pid_hash

Kmemleak does not track alloc_bootmem calls but the pid_hash allocated
in pidhash_init() would need to be scanned as it contains pointers to
struct pid objects.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
15 years agokmemleak: Do not warn if an unknown object is freed
Catalin Marinas [Mon, 29 Jun 2009 16:13:57 +0000 (17:13 +0100)]
kmemleak: Do not warn if an unknown object is freed

vmap'ed memory blocks are not tracked by kmemleak (yet) but they may be
released with vfree() which is tracked. The corresponding kmemleak
warning is only enabled in debug mode. Future patch will add support for
ioremap and vmap.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
15 years agokmemleak: Do not report new leaked objects if the scanning was stopped
Catalin Marinas [Mon, 29 Jun 2009 16:13:56 +0000 (17:13 +0100)]
kmemleak: Do not report new leaked objects if the scanning was stopped

If the scanning was stopped with a signal, it is possible that some
objects are left with a white colour (potential leaks) and reported. Add
a check to avoid reporting such objects.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
15 years agosound: OSS: mpu401, fix deadlock
Jiri Slaby [Mon, 29 Jun 2009 16:03:34 +0000 (18:03 +0200)]
sound: OSS: mpu401, fix deadlock

mpu401_chk_version is called with a spin lock already held. Don't take it
again.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 years agoMerge branch 'fix/pci-vdevice' into for-linus
Takashi Iwai [Mon, 29 Jun 2009 16:05:09 +0000 (18:05 +0200)]
Merge branch 'fix/pci-vdevice' into for-linus

* fix/pci-vdevice:
  sound: Use PCI_VDEVICE for CREATIVE and ECTIVA
  sound: Use PCI_VDEVICE

15 years agoMerge branch 'fix/oxygen' into for-linus
Takashi Iwai [Mon, 29 Jun 2009 16:05:07 +0000 (18:05 +0200)]
Merge branch 'fix/oxygen' into for-linus

* fix/oxygen:
  sound: oxygen: make mic volume control mono

15 years agoMerge branch 'fix/misc' into for-linus
Takashi Iwai [Mon, 29 Jun 2009 16:05:06 +0000 (18:05 +0200)]
Merge branch 'fix/misc' into for-linus

* fix/misc:
  ALSA: cmi8330: fix MPU-401 PnP init copy&paste bug

15 years agoMerge branch 'fix/lx6464es' into for-linus
Takashi Iwai [Mon, 29 Jun 2009 16:05:05 +0000 (18:05 +0200)]
Merge branch 'fix/lx6464es' into for-linus

* fix/lx6464es:
  ALSA: lx6464es - configure ethersound io channels

15 years agoMerge branch 'fix/hda-samsung-p50' into for-linus
Takashi Iwai [Mon, 29 Jun 2009 16:05:04 +0000 (18:05 +0200)]
Merge branch 'fix/hda-samsung-p50' into for-linus

* fix/hda-samsung-p50:
  ALSA: hda - Fix support for Samsung P50 with AD1986A codec
  ALSA: hda - Generalize the pin-detect quirk for Lenovo N100
  ALSA: hda - Simplify AD1986A mixer definitions

15 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Mon, 29 Jun 2009 16:05:02 +0000 (18:05 +0200)]
Merge branch 'fix/hda' into for-linus

* fix/hda:
  ALSA: hda - Add missing initializations for ALC268 and ALC269
  ALSA: hda - Line In for Acer Inspire 6530G model
  ALSA: hda - Use model=acer-aspire-6530g for Acer Aspire 6930G
  ALSA: hda - Fix acer-aspire-6530g model quirk
  ALSA: hda - Add pin-sense trigger when needed for Realtek codecs

15 years agofs: allow d_instantiate to be called with negative parent dentry
Jeremy Kerr [Mon, 29 Jun 2009 06:31:58 +0000 (14:31 +0800)]
fs: allow d_instantiate to be called with negative parent dentry

The new fsnotify infrastructure (starting at 90586523) causes an oops in
spufs, where we populate a directory with files before instantiating the
directory itself. The new changes seem to have introduced an assumption
that a dentry's parent will be positive when instantiating.

This change makes it once again possible to d_instantiate a dentry
with a negative parent, and brings __fsnotify_d_instantiate() into
line with inotify_d_instantiate(), which already has this NULL check.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
15 years ago[ARM] 5562/2: at91: add gpio button support for at91sam9g20ek
Nicolas Ferre [Mon, 29 Jun 2009 11:11:50 +0000 (12:11 +0100)]
[ARM] 5562/2: at91: add gpio button support for at91sam9g20ek

This adds input keyboard gpio support on at91sam9g20ek board.
It adds button 3 and 4.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
15 years agoALSA: hda - Add missing initializations for ALC268 and ALC269
Takashi Iwai [Mon, 29 Jun 2009 09:33:53 +0000 (11:33 +0200)]
ALSA: hda - Add missing initializations for ALC268 and ALC269

During the changes to clean up / fix the realtek codec initialization
routines in commit 4a79ba34cada6a5a4ee86ed53aa8a73ba1e6fc51,
I forgot to add the check for ALC268 and ALC269.
This resulted in the missing EAPD and COEF setup for these codecs.

This patch adds the missing checks for these codecs.

Reference: bko#13633
http://bugzilla.kernel.org/show_bug.cgi?id=13633

Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 years agoperf_counter, x86: Update x86_pmu after WARN()
Yinghai Lu [Mon, 29 Jun 2009 07:41:11 +0000 (00:41 -0700)]
perf_counter, x86: Update x86_pmu after WARN()

The print out should read the value before changing the value.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4A487017.4090007@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoALSA: cmi8330: fix MPU-401 PnP init copy&paste bug
Ondrej Zary [Sat, 27 Jun 2009 14:17:08 +0000 (16:17 +0200)]
ALSA: cmi8330: fix MPU-401 PnP init copy&paste bug

Fix copy&paste bug in PnP MPU-401 initialization.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 years agoALSA: hda - Line In for Acer Inspire 6530G model
Tony Vroon [Fri, 26 Jun 2009 08:27:50 +0000 (09:27 +0100)]
ALSA: hda - Line In for Acer Inspire 6530G model

The Line In connector is set up as PIN_IN by default, using
VREF_HIZ. It is connected to both ADCs, so add it to both
input selectors.
Also add the ability to use the input mix (on a SoundBlaster
one would call this "What You Hear").

Signed-off-by: Tony Vroon <tony@linx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 29 Jun 2009 02:57:31 +0000 (19:57 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  be2net: Fix to avoid a crash seen on PPC with LRO and Jumbo frames.
  gro: Flush GRO packets in napi_disable_pending path
  inet: Call skb_orphan before tproxy activates
  mac80211: Use rcu_barrier() on unload.
  sunrpc: Use rcu_barrier() on unload.
  bridge: Use rcu_barrier() instead of syncronize_net() on unload.
  ipv6: Use rcu_barrier() on module unload.
  decnet: Use rcu_barrier() on module unload.
  sky2: Fix checksum endianness
  mdio add missing GPL flag
  sh_eth: remove redundant test on unsigned
  fsl_pq_mdio: Fix fsl_pq_mdio to work with modules
  ipv6: avoid wraparound for expired preferred lifetime
  tcp: missing check ACK flag of received segment in FIN-WAIT-2 state
  atl1*: add device_set_wakeup_enable to atl1*_set_wol
  Phonet: generate Netlink RTM_DELADDR when destroying a device
  Phonet: publicize the Netlink notification function
  Revert "veth: prevent oops caused by netdev destructor"
  cpmac: fix compilation failure introduced with netdev_ops conversion
  ipsec: Fix name of CAST algorithm

15 years agobe2net: Fix to avoid a crash seen on PPC with LRO and Jumbo frames.
Ajit Khaparde [Fri, 26 Jun 2009 02:51:07 +0000 (02:51 +0000)]
be2net: Fix to avoid a crash seen on PPC with LRO and Jumbo frames.

While testing the driver on PPC, we ran into a crash with LRO, Jumbo frames.
With CONFIG_PPC_64K_PAGES configured (a default in PPC), MAX_SKB_FRAGS drops to 3 and we were crossing the array limits on skb_shinfo(skb)->frags[].
Now we coalesce the frags from the same physical page into one slot in
skb_shinfo(skb)->frags[] and go to the next index when the frag is from

different physical page.

This patch is against the net-2.6 tree.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agointegrity: add ima_counts_put (updated)
Mimi Zohar [Fri, 26 Jun 2009 18:05:27 +0000 (14:05 -0400)]
integrity: add ima_counts_put (updated)

This patch fixes an imbalance message as reported by J.R. Okajima.
The IMA file counters are incremented in ima_path_check. If the
actual open fails, such as ETXTBSY, decrement the counters to
prevent unnecessary imbalance messages.

Reported-by: J.R. Okajima <hooanon05@yahoo.co.jp>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
15 years agointegrity: ima audit hash_exists fix
Mimi Zohar [Fri, 26 Jun 2009 15:25:00 +0000 (11:25 -0400)]
integrity: ima audit hash_exists fix

Audit the file name, not the template name.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
15 years agointegrity: ima mq_open imbalance msg fix
Mimi Zohar [Fri, 26 Jun 2009 15:24:05 +0000 (11:24 -0400)]
integrity: ima mq_open imbalance msg fix

This patch fixes an imbalance message as reported by Sanchin Sant.
As we don't need to measure the message queue, just increment the
counters.

Reported-by: Sanchin Sant <sanchinp@in.ibm.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
15 years agoMerge branch 'kvm-updates/2.6.31' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Sun, 28 Jun 2009 18:12:52 +0000 (11:12 -0700)]
Merge branch 'kvm-updates/2.6.31' of git://git./virt/kvm/kvm

* 'kvm-updates/2.6.31' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: shut up uninit compiler warning in paging_tmpl.h
  KVM: Ignore reads to K7 EVNTSEL MSRs
  KVM: VMX: Handle vmx instruction vmexits
  KVM: s390: Allow stfle instruction in the guest
  KVM: kvm/x86_emulate.c toggle_interruptibility() should be static
  KVM: ia64: fix ia64 build due to missing kallsyms_lookup() and double export
  KVM: protect concurrent make_all_cpus_request
  KVM: MMU: Allow 4K ptes with bit 7 (PAT) set
  KVM: Fix dirty bit tracking for slots with large pages

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Sun, 28 Jun 2009 18:08:09 +0000 (11:08 -0700)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix fh_mutex locking in cifs_reopen_file

15 years agoMerge git://git.infradead.org/iommu-2.6
Linus Torvalds [Sun, 28 Jun 2009 18:06:11 +0000 (11:06 -0700)]
Merge git://git.infradead.org/iommu-2.6

* git://git.infradead.org/iommu-2.6:
  intel-iommu: fix Identity Mapping to be arch independent

15 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 28 Jun 2009 18:05:28 +0000 (11:05 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, delay: tsc based udelay should have rdtsc_barrier
  x86, setup: correct include file in <asm/boot.h>
  x86, setup: Fix typo "CONFIG_x86_64" in <asm/boot.h>
  x86, mce: percpu mcheck_timer should be pinned
  x86: Add sysctl to allow panic on IOCK NMI error
  x86: Fix uv bau sending buffer initialization
  x86, mce: Fix mce resume on 32bit
  x86: Move init_gbpages() to setup_arch()
  x86: ensure percpu lpage doesn't consume too much vmalloc space
  x86: implement percpu_alloc kernel parameter
  x86: fix pageattr handling for lpage percpu allocator and re-enable it
  x86: reorganize cpa_process_alias()
  x86: prepare setup_pcpu_lpage() for pageattr fix
  x86: rename remap percpu first chunk allocator to lpage
  x86: fix duplicate free in setup_pcpu_remap() failure path
  percpu: fix too lazy vunmap cache flushing
  x86: Set cpu_llc_id on AMD CPUs

15 years agoMerge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 28 Jun 2009 18:05:16 +0000 (11:05 -0700)]
Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timer stats: Optimize by adding quick check to avoid function calls
  timers: Fix timer_migration interface which accepts any number as input