ASoC: qcom: lpass: Fix apq8016 compat string to match yaml

The documented yaml compat string for the apq8016 is
"qcom,apq8016-lpass-cpu" not "qcom,lpass-cpu-apq8016". Looking at the other
lpass compat strings the general form is "qcom,socnum-lpass-cpu".

We need to fix both the driver and dts to match.

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20220628120435.3044939-2-bryan.odonoghue@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Add PDM/DSD/dataline configuration support

Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:

Support PDM format and DSD format.
Add new dts property to configure dataline. The SAI has multiple
successive FIFO registers, but in some use
case the required dataline/FIFOs are not successive.

ASoC: use pm_runtime_resume_and_get() when possible

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

After a set of SOF-specific changes, this patchset correct problematic
uses of pm_runtime_get_sync() in ASoC, or simplifies the flow with no
functional changes. Two patches for Intel platforms also add a test on
resume success.

Additional changes were initially suggested to completely remove the
use of pm_runtime_get_sync(). These changes were dropped since they
are way too invasive, specifically in cases where the return values
were not tested, which would lead to duplicate pm_runtime_put(). The
remaining uses of pm_runtime_get_sync() cannot really be blindly
modified without context and knowledge of each driver.

ASoC: samsung: h1940_uda1380: include proepr GPIO consumer header

h1940_uda1380 uses gpiod*/GPIOD* so it should include GPIO consumer
header.

Fixes: 9666e27f90b9 ("ASoC: samsung: h1940: turn into platform driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627141900.470469-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: samsung: Enable compile test

Allow compile testing of Samsung SoC Sound drivers.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627143412.477226-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: samsung: s3c24xx-i2s: Drop unneeded gpio.h include

The module does not use anything from gpio.h header.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627143412.477226-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: samsung: s3c-i2s-v2: Allow build for unsupported hardware

There is no particular need to restrict building of S3C I2S driver to
supported platforms within the C unit, because Kconfig does it.
Removing such restricting #ifdef from s3c-i2s-v2 allows compile testing
it on other platforms.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627143412.477226-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98396: Some assorted fixes and additions

Merge series from Daniel Mack <daniel@zonque.org>:

This is a series of some patches that I collected while using the
max98396 driver is a TDM mode setup.

They correct BSEL and PCM mode configs, add support for power supplies
and add some bits to the documentation.

The code is tested in TDM-16 and TDM-8 mode with 32 channel width.

ASoC: sun50i-codec-analog: Internal bias support

Merge series from Samuel Holland <samuel@sholland.org>:

This series adds support for enabling the codec's internal microphone
bias, which is needed on at least some versions of the PinePhone.

Changes in v2:
 - Move register update from component probe to device probe

Arnaud Ferraris (2):
  ASoC: dt-bindings: sun50i-codec: Add binding for internal bias
  ASoC: sun50i-codec-analog: Add support for internal bias

Samuel Holland (1):
  arm64: dts: allwinner: pinephone: Enable internal HMIC bias

 .../bindings/sound/allwinner,sun50i-a64-codec-analog.yaml | 5 +++++
 .../arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts | 4 ++++
 .../arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts | 4 ++++
 sound/soc/sunxi/sun50i-codec-analog.c                     | 8 ++++++++
 4 files changed, 21 insertions(+)

--
2.35.1

ASoC: samsung: s3c24xx-i2s: Fix typo in DAIFMT handling

The conversion of the set_fmt callback to direct clock specification
included a small typo, correct the affected code.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627094335.3051210-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Merge up fixes

Further development will need some of the fixes.

ASoC: fsl_sai: Configure dataline/FIFO information from dts property

The SAI has multiple successive FIFO registers, but in some use
case the required dataline/FIFOs are not successive, so need
get such information from dts property "fsl,dataline"

fsl,dataline has 3 values for each configuration:
first one means the type: I2S(1) or DSD(2),
second one is dataline mask for 'rx',
third one is dataline mask for 'tx'.

Also set dma peripheral address and TRCE bits according to data lane.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Link: https://lore.kernel.org/r/1655451877-16382-8-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: fsl-sai: Add new property to configure dataline

"fsl,dataline" is added to configure the dataline of SAI.
It has 3 value for each configuration, first one means the type:
I2S(1) or PDM(2), second one is dataline mask for 'rx', third one is
dataline mask for 'tx'. for example:

fsl,dataline = <1 0xff 0xff 2 0xff 0x11>,

it means I2S type rx mask is 0xff, tx mask is 0xff, PDM type
rx mask is 0xff, tx mask is 0x11 (dataline 1 and 4 enabled).

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1655451877-16382-7-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_sai: Make res a member of struct fsl_sai

The resource info need to be accessed by hw_params()
function for multi fifo case, the start address may
be not the FIFO0. So move it to be a member of
struct fsl_sai.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1655451877-16382-6-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoc: fsl_sai: Add pinctrl operation for PDM and DSD

With DSD format, the pinctrl is different compare with
I2S format, because one dataline only has one channel
data, and the codec always mux the LRCLK pin to DSD
data line, and on i.MX8MQ the BCLK pin can route to
codec on DSD case for the MCLK is too high.

Add pinctrl operation that the pinctrl can be switched
on runtime according to the I2S format or DSD format

Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1655451877-16382-5-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_sai: Add support for more sample rates

Add support for more sample rates, because PDM format
bitstream has higher sample rates. for example DSD512
format, the bit clock is 22.5792MHz, if the word width
is U8_LE, then the max sample rate is 2822400.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1655451877-16382-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_sai: Add DSD bit format support

Support DSD_U8, DSD_U16_LE, DSD_U32_LE.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1655451877-16382-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_sai: Add PDM daifmt support

PDM format is used for 1-bit stream, so clear the FBT and SYWD,
and the each dataline only has one channel data.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1655451877-16382-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sun50i-codec-analog: Add support for internal bias

In order to properly bias headset microphones, there should be a pull-up
resistor between pins HBIAS and MIC2P. This can be an external resistor,
but the codec also provides an internal 2.2K resistor which is enabled
by a register.

This patch enables or disables the internal bias resistor based on a
device tree property.

Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
[Samuel: split binding and implementation; move to device probe]
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220621035452.60272-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: sun50i-codec: Add binding for internal bias

In order to properly bias headset microphones, there should be a pull-up
resistor between pins HBIAS and MIC2P. This can be an external resistor,
but the codec also provides an internal 2.2K resistor which is enabled
by a register.

This patch adds a device-tree property to the sun50i-codec-analog driver
to take advantage of this feature.

Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
[Samuel: split binding and implementation patches]
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220621035452.60272-2-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ti: davinci-mcasp: use pm_runtime_resume_and_get()

The use of pm_runtime_get_sync() is buggy with no use of put_noidle on
error.

Use pm_runtime_resume_and_get() instead.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tas2552: use pm_runtime_resume_and_get()

The use of pm_runtime_get_sync() is buggy with no use of put_noidle() on
error.

Use pm_runtime_resume_and_get() instead.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rockchip: pdm: use pm_runtime_resume_and_get()

Simplify the flow.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: img: img-i2s-out: use pm_runtime_resume_and_get()

Simplify the flow.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl: fsl_sai: use pm_runtime_resume_and_get()

Simplify the flow.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rockchip: i2s_tdm: use pm_runtime_resume_and_get()

simplify the flow. No functionality change, except that on -EACCESS
the reference count will be decreased.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wsa881x: use pm_runtime_resume_and_get()

simplify the flow. No functionality change, except that on -EACCESS
the reference count will be decreased.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wcd-mbhc-v2: use pm_runtime_resume_and_get()

simplify the flow. No functionality change, except that on -EACCESS
the reference count will be decreased.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: skylake: skl-pcm: use pm_runtime_resume_and_get()

The current code does not check for errors and does not release the
reference on errors.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: catpt: use pm_runtime_resume_and_get()

The current code does not check for errors and does not release the
reference on errors.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98396: Implement DSP speaker monitor

Allow the selection of the TDM slot that is used to send back speaker
monitor data. The DT property adi,spkfb-slot-no can be used to configure
this setting which defaults to 2.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220624104712.1934484-8-daniel@zonque.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98396: Fix register access for PCM format settings

max98396_dai_set_fmt() modifes register 2041 and touches bits in the mask
0x3a. Make sure to use the right mask for that operation.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220624104712.1934484-7-daniel@zonque.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98396: Improve some error prints

Let's log what actually failed and log at some more places.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220624104712.1934484-6-daniel@zonque.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max98396: add voltage regulators

The device has up to 5 potentially independent power supplies:
AVDD, DVDD, DVVDIO, VBAT and PVDD. The former 3 are mandatory for the
device to function. One of VBAT and PVDD should also be made available.

Regulators are enabled during probe time and will stay active except when in
suspend mode.

Futher, the chip needs to be informed about the presence of VBAT through a
bit in register 0x20a0.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220624104712.1934484-5-daniel@zonque.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: max98396: Document adi,bypass-slot-no

This property allows to select the PCM data input channel that is
routed to the speaker audio processing bypass path.

The driver already implements this property.

While at it, fix the default value for adi,imon-slot-no.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220624104712.1934484-4-daniel@zonque.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: max98396: add voltage supplies

The device is supplied with 3 core voltages (DVVDIO, DVDD, AVDD), and
PVDD and/or VBAT.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220624104712.1934484-2-daniel@zonque.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: audio_graph_card2: Fix port numbers in example

The example in audio-graph-card2.c has multiple nodes with the same name
in it. Change the port numbers to get different names.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220624092601.2445224-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sgtl5000: Fix noise on shutdown/remove

Put the SGTL5000 in a silent/safe state on shutdown/remove, this is
required since the SGTL5000 produces a constant noise on its output
after it is configured and its clock is removed. Without this change
this is happening every time the module is unbound/removed or from
reboot till the clock is enabled again.

The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can
be easily reproduced everywhere just playing something on the codec and
after that removing/unbinding the driver.

Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20220624101301.441314-1-francesco.dolcini@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>

regmap: Wire up regmap_config provided bulk write in missed functions

There are some functions that were missed by commit d77e74561368 ("regmap:
Add bulk read/write callbacks into regmap_config") when support to define
bulk read/write callbacks in regmap_config was introduced.

The regmap_bulk_write() and regmap_noinc_write() functions weren't changed
to use the added map->write instead of the map->bus->write handler.

Also, the regmap_can_raw_write() was not modified to take map->write into
account. So will only return true if a bus with a .write callback is set.

Fixes: d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220616073435.1988219-4-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>

regmap: Make regmap_noinc_read() return -ENOTSUPP if map->read isn't set

Before adding support to define bulk read/write callbacks in regmap_config
by the commit d77e74561368 ("regmap: Add bulk read/write callbacks into
regmap_config"), the regmap_noinc_read() function returned an errno early
a map->bus->read callback wasn't set.

But that commit dropped the check and now a call to _regmap_raw_read() is
attempted even when bulk read operations are not supported. That function
checks for map->read anyways but there's no point to continue if the read
can't succeed.

Also is a fragile assumption to make so is better to make it fail earlier.

Fixes: d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220616073435.1988219-3-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>

regmap: Re-introduce bulk read support check in regmap_bulk_read()

Support for drivers to define bulk read/write callbacks in regmap_config
was introduced by the commit d77e74561368 ("regmap: Add bulk read/write
callbacks into regmap_config"), but this commit wrongly dropped a check
in regmap_bulk_read() to determine whether bulk reads can be done or not.

Before that commit, it was checked if map->bus was set. Now has to check
if a map->read callback has been set.

Fixes: d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220616073435.1988219-2-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: madera: Fix event generation for rate controls

madera_adsp_rate_put always returns zero regardless of if the control
value was updated. This results in missing notifications to user-space
of the control change. Update the handling to return 1 when the
value is changed.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: madera: Fix event generation for OUT1 demux

madera_out1_demux_put returns the value of
snd_soc_dapm_mux_update_power, which returns a 1 if a path was found for
the kcontrol. This is obviously different to the expected return a 1 if
the control was updated value. This results in spurious notifications to
user-space. Update the handling to only return a 1 when the value is
changed.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs47l15: Fix event generation for low power mux control

cs47l15_in1_adc_put always returns zero regardless of if the control
value was updated. This results in missing notifications to user-space
of the control change. Update the handling to return 1 when the value is
changed.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l41: Add ASP TX3/4 source to register patch

The mixer controls for ASP TX3/4 are set to values that are not included
in their enumeration control. This will cause spurious event
notifications when the controls are first changed, as the register value
changes whilst the actual visible enumeration value does not. Use the
register patch to set them to a known value, zero, which equates to zero
fill, thereby avoiding the spurious notifications.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dapm: Initialise kcontrol data for mux/demux controls

DAPM keeps a copy of the current value of mux/demux controls,
however this value is only initialised in the case of autodisable
controls. This leads to false notification events when first
modifying a DAPM kcontrol that has a non-zero default.

Autodisable controls are left as they are, since they already
initialise the value, and there would be more work required to
support autodisable muxes where the first option isn't disabled
and/or that isn't the default.

Technically this issue could affect mixer/switch elements as well,
although not on any of the devices I am currently running. There
is also a little more work to do to address the issue there due to
that side supporting stereo controls, so that has not been tackled
in this patch.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error

The initial settings will be written before the codec probe function.
But, the rt711->component doesn't be assigned yet.
If IO error happened during initial settings operations, it will cause the kernel panic.
This patch changed component->dev to slave->dev to fix this issue.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20220621090719.30558-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l41: Correct some control names

Various boolean controls on cs35l41 are missing the required "Switch" in
the name, add these.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220621102041.1713504-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm5110: Fix DRE control

The DRE controls on wm5110 should return a value of 1 if the DRE state
is actually changed, update to fix this.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220621102041.1713504-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm_adsp: Fix event for preloader

The preloader controls on ADSP should return a value of 1 if the
preloader value was changed, update to correct this.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220621102041.1713504-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

MAINTAINERS: update ASoC Qualcomm maintainer email-id

Update Banajit's email address from codeaurora.org to quicinc.com, as
codeaurora.org is not in use anymore.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220617210230.7685-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rockchip: i2s: switch BCLK to GPIO

We discoverd that the state of BCLK on, LRCLK off and SD_MODE on
may cause the speaker melting issue. Removing LRCLK while BCLK
is present can cause unexpected output behavior including a large
DC output voltage as described in the Max98357a datasheet.

In order to:
  1. prevent BCLK from turning on by other component.
  2. keep BCLK and LRCLK being present at the same time

This patch switches BCLK to GPIO func before LRCLK output, and
configures BCLK func back during LRCLK is output.

Without this fix, BCLK is turned on 11 ms earlier than LRCK by the
da7219.
With this fix, BCLK is turned on only 0.4 ms earlier than LRCK by
the rockchip codec.

Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Link: https://lore.kernel.org/r/20220615045643.3137287-1-judyhsiao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: disable IMR boot when resuming from ACPI S4 and S5 states

The IMR was assumed to be preserved when suspending to S4 and S5
states, but community reports invalidate that assumption, the hardware
seems to be powered off and the IMR memory content cleared.

Make sure regular boot with firmware download is used for S4 and S5.

BugLink: https://github.com/thesofproject/sof/issues/5892
Fixes: 5fb5f51185126 ("ASoC: SOF: Intel: hda-loader: add IMR restore support")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220616201818.130802-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: pm: add definitions for S4 and S5 states

We currently don't have a means to differentiate between S3, S4 and
S5. Add definitions so that we have select different code paths
depending on the target state in follow-up patches.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220616201818.130802-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: pm: add explicit behavior for ACPI S1 and S2

The existing code only deals with S0 and S3, let's start adding S1 and S2.

No functional change.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220616201818.130802-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: Fix compressed stream position tracking

Commit 288fad2f71fa ("ASoC: SOF: Intel: hda: add quirks for HDAudio DMA position information")
modified the PCM path only, but left the compressed data patch using an
obsolete option.
Move the functionality in a helper that can be called for both PCM and
compressed data.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Fixes: 288fad2f71fa ("ASoC: SOF: Intel: hda: add quirks for HDAudio DMA position information")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220616201953.130876-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: mediatek: Fix error code in probe

This should return PTR_ERR() instead of IS_ERR().

Fixes: e0100bfd383c ("ASoC: SOF: mediatek: Add mt8186 ipc support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/YqmWIK8sTj578OJP@kili
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bytcr_wm5102: Fix GPIO related probe-ordering problem

The "wlf,spkvdd-ena" GPIO needed by the bytcr_wm5102 driver
is made available through a gpio-lookup table.

This gpio-lookup table is registered by drivers/mfd/arizona-spi.c, which
may get probed after the bytcr_wm5102 driver.

If the gpio-lookup table has not registered yet then the gpiod_get()
will return -ENOENT. Treat -ENOENT as -EPROBE_DEFER to still keep
things working in this case.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220612155652.107310-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>

MAINTAINERS: update ASoC/Intel/SOF maintainers

Keyon Jie was a key contributor to the Intel ASoC and SOF Intel
drivers, but he's moved on to a different role within Intel. We wish
him all the best in his new endeavors.

Bard Liao, Kai Vehmanen, Ranjani Sridharan and Peter Ujfalusi have
been involved in the Intel multi-maintainer team, it's time to update
the MAINTAINERS entry to reflect their contributions and clarify their
role.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220610214313.42903-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wcd938x: Fix event generation for some controls

Currently wcd938x_*_put() unconditionally report that the value of the
control changed, resulting in spurious events being generated. Return 0 in
that case instead as we should. There is still an issue in the compander
control which is a bit more complex.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220603122526.3914942-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wcd9335: Fix spurious event generation

The slimbus mux put operation unconditionally reports a change in value
which means that spurious events are generated. Fix this by exiting early
in that case.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220603124609.4024666-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wcd9335: Remove RX channel from old list before adding it to a new one

Currently in slim_rx_mux_put, an RX channel gets added to a new list
even if it is already in one. This can mess up links and make either
it, the new list head, or both, get linked to the wrong entries.
This can cause an entry to link to itself which in turn ends up
making list_for_each_entry in other functions loop infinitely.
To avoid issues, always remove the RX channel from any list it's in
before adding it to a new list.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20220606152226.149164-1-y.oudjana@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qdsp6: q6apm-dai: unprepare stream if its already prepared

prepare callback can be called multiple times, so unprepare the stream
if its already prepared.

Without this DSP is not happy to setting the params on a already
prepared graph.

Fixes: 9b4fe0f1cd79 ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220610144818.511797-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Remove unused hw_write_t type

Commit 81da8a0b7975 ("ASoC: remove codec hw_write/control_data") removed
use of hw_write_t in struct snd_soc_codec, but it left type definition.
Fully clean it up.

Fixes: 81da8a0b7975 ("ASoC: remove codec hw_write/control_data")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220610124420.4160986-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: avs: Fix parsing UUIDs in topology

Use correct type for parsing UUIDs, this eliminates warning present,
when compiling with W=1.

Fixes: 34ae2cd53673 ("ASoC: Intel: avs: Add topology parsing infrastructure")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220610124257.4160658-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc3-topology: Move and correct size checks in sof_ipc3_control_load_bytes()

Move the size checks prior to allocating memory as these checks do not need
the data to be allocated and in case of an error we would not need to free
the allocation.

The max size must not be less than the size of
struct sof_ipc_ctrl_data + struct sof_abi_hdr as the ABI header needs to
be present under all circumstances.
The check was incorrectly used or between the two size checks.

Fixes: b5cee8feb1d4 ("ASoC: SOF: topology: Make control parsing IPC agnostic")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220610084735.19397-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda-loader: Clarify the cl_dsp_init() flow

Update the comment for the cl_dsp_init() to clarify what is done by the
function and use the chip->init_core_mask instead of BIT(0) when
unstalling/running the init core.

Complements: 2a68ff846164 ("ASoC: SOF: Intel: hda: Revisit IMR boot sequence")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609085949.29062-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda-loader: Make sure that the fw load sequence is followed

The hda_dsp_enable_core() is powering up _and_ unstall the core in one
call while the first step of the firmware loading  must not unstall the
core.
The core can be unstalled only after the set cpb_cfp and the configuration
of the IPC register for the ROM_CONTROL message.

Complements: 2a68ff846164 ("ASoC: SOF: Intel: hda: Revisit IMR boot sequence")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609085949.29062-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda-dsp: Expose hda_dsp_core_power_up()

The hda_dsp_core_power_up() needs to be exposed so that it can be used in
hda-loader.c to correct the boot flow.
The first step must not unstall the core, it should only power up the
core(s).

Add sanity check for the core_mask while exposing it to be safe.

Complements: 2a68ff846164 ("ASoC: SOF: Intel: hda: Revisit IMR boot sequence")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609085949.29062-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ak4613: cares Simple-Audio-Card case for TDM

Renesas is the only user of ak4613 on upstream for now, and
commit f28dbaa958fbd8 ("ASoC: ak4613: add TDM256 support")
added TDM256 support. Renesas tested part of it, because of
board connection.

It was assuming ak4613 is probed via Audio-Graph-Card, but it
might be probed via Simple-Audio-Card either.
It will indicates WARNING in such case. This patch fixup it.

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87h74v29f7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: rt700/rt711/rt711-sdca: resume bus/codec in .set_jack_detect

The .set_jack_detect() codec component callback is invoked during card
registration, which happens when the machine driver is probed.

The issue is that this callback can race with the bus suspend/resume,
and IO timeouts can happen. This can be reproduced very easily if the
machine driver is 'blacklisted' and manually probed after the bus
suspends. The bus and codec need to be re-initialized using pm_runtime
helpers.

Previous contributions tried to make sure accesses to the bus during
the .set_jack_detect() component callback only happen when the bus is
active. This was done by changing the regcache status on a component
remove. This is however a layering violation, the regcache status
should only be modified on device probe, suspend and resume. The
component probe/remove should not modify how the device regcache is
handled. This solution also didn't handle all the possible race
conditions, and the RT700 headset codec was not handled.

This patch tries to resume the codec device before handling the jack
initializations. In case the codec has not yet been initialized,
pm_runtime may not be enabled yet, so we don't squelch the -EACCES
error code and only stop the jack information. When the codec reports
as attached, the jack initialization will proceed as usual.

BugLink: https://github.com/thesofproject/linux/issues/3643
Fixes: 7ad4d237e7c4a ('ASoC: rt711-sdca: Add RT711 SDCA vendor-specific driver')
Fixes: 899b12542b089 ('ASoC: rt711: add snd_soc_component remove callback')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: rt700/rt711/rt711-sdca: initialize workqueues in probe

The workqueues are initialized in the io_init functions, which isn't
quite right. In some tests, this leads to warnings throw from
__queue_delayed_work()

WARN_ON_FUNCTION_MISMATCH(timer->function, delayed_work_timer_fn);

Move all the initializations to the probe functions.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt7*-sdw: harden jack_detect_handler

Realtek headset codec drivers typically check if the card is
instantiated before proceeding with the jack detection.

The rt700, rt711 and rt711-sdca are however missing a check on the
card pointer, which can lead to NULL dereferences encountered in
driver bind/unbind tests.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt711: fix calibrate mutex initialization

Follow the same flow as rt711-sdca and initialize all mutexes at probe
time.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_sdw: handle errors on card registration

If the card registration fails, typically because of deferred probes,
the device properties added for headset codecs are not removed, which
leads to kernel oopses in driver bind/unbind tests.

We already clean-up the device properties when the card is removed,
this code can be moved as a helper and called upon card registration
errors.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt711-sdca-sdw: fix calibrate mutex initialization

In codec driver bind/unbind test, the following warning is thrown:

DEBUG_LOCKS_WARN_ON(lock->magic != lock)
...
[  699.182495]  rt711_sdca_jack_init+0x1b/0x1d0 [snd_soc_rt711_sdca]
[  699.182498]  rt711_sdca_set_jack_detect+0x3b/0x90 [snd_soc_rt711_sdca]
[  699.182500]  snd_soc_component_set_jack+0x24/0x50 [snd_soc_core]

A quick check in the code shows that the 'calibrate_mutex' used by
this driver are not initialized at probe time. Moving the
initialization to the probe removes the issue.

BugLink: https://github.com/thesofproject/linux/issues/3644
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Realtek/Maxim SoundWire codecs: disable pm_runtime on remove

When binding/unbinding codec drivers, the following warnings are
thrown:

[ 107.266879] rt715-sdca sdw:3:025d:0714:01: Unbalanced pm_runtime_enable!
[  306.879700] rt711-sdca sdw:0:025d:0711:01: Unbalanced pm_runtime_enable!

Add a remove callback for all Realtek/Maxim SoundWire codecs and remove this
warning.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs35l41: Add support for CLSA3541 ACPI device ID

Add support for the CLSA3541 ACPI device ID used on Valve's Steam Deck.
The driver is fully compatible with the indicated hardware, hence no
additional changes are required.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: David Rhodes <drhodes@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220621213819.262537-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rockchip: i2s: Fix missing error code in rockchip_i2s_probe()

The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'ret'.

This was found by coccicheck:

sound/soc/rockchip/rockchip_i2s.c:810 rockchip_i2s_probe() warn: missing error code 'ret'.

Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220624082745.68367-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: haswell and broadwell boards update

Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:

A number of patches improving overall quality and readability of
haswell.c and broadwell.c source files found in sound/soc/intel/boards.
Both files are first renamed and only then actual changes are being
incrementally added. The respective names are: hsw_rt5640 and bdw_rt286
to match the pattern found in more recent boards.

Most patches bring no functional change - the more impactful patches at
are placed the end.  The last patch is removing of FE DAI ops. Given the
existence of platform FE DAI capabilities (either static declaration or
through topology file), this code is redundant.

ASoC: dapm: Move stereo autodisable check

Tidy up the code a little, rather than repeating the check of
mc->autodisable move the stereo error check to be under the
existing if for mc->autodisable.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: topology: KUnit: Followup prototype change of snd_soc_unregister_card()

snd_soc_unregister_card() was recently converted to return void. Only
the first instance was adapted, so convert the remaining ones now to fix
building the topology test.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 1892a991886a ("ASoC: core: Make snd_soc_unregister_card() return void")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220622210629.286487-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bdw_rt286: Remove FE DAI ops

bdw_rt286_fe_ops is redundant as platform components already limit the
number of channels available for the endpoint.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-18-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bdw_rt286: Improve codec_init() quality

Drop redundant 'ret' assignemnt, stop ignoring set_jack() return value
and reword local 'component' variable to 'codec' to improve readability.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-16-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bdw_rt286: Improve hw_params() debug-ability

Print status if setting sysclk fails.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bdw_rt286: Improve probe() function quality

Declare local 'dev' and make use of it plus dev_get_platdata() to
improve code readability. Relocate few relevant to the function macros
for the exact same read too.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bdw_rt286: Update file comments

Drop redundant and update valuable comments within the file to increase
readability. This patch also revisits module information and kconfig
help strings.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bdw_rt286: Update code indentation

Make use of 100 character limit and modify indentation so code is easier
to read. While at it, sort includes in alphabetical order.

While at it, rename local variable 'chan' to 'channels' to match
hsw_rt5640 board's equivalent.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bdw_rt286: Reword driver name

Align with other Intel boards naming convention and let the name
explicitly state which components are being connected.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bdw_rt286: Reword prefixes of all driver members

Replace ambiguous 'broadwell_rt286_' prefixes in favour of 'card_',
'link_' and other similar strings to clearly state which object given
member implements behavior for.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Rename broadwell source file to bdw_rt286

Rename source file to drop any ambiguity.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: hsw_rt5640: Improve hw_params() debug-ability

Print status if setting sysclk fails.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: hsw_rt5640: Improve probe() function quality

Declare local 'dev' and make use of it plus dev_get_platdata() to
improve code readability.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: hsw_rt5640: Update file comments

Drop redundant and update valuable comments within the file to increase
readability. This patch also revisits module information and kconfig
help strings.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: hsw_rt5640: Update code indentation

Make use of 100 character limit and modify indentation so code is easier
to read. While at it, sort includes in alphabetical order.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: hsw_rt5640: Reword driver name

Align with other Intel boards naming convention and let the name
explicitly state which components are being connected.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: hsw_rt5640: Reword prefixes of all driver members

Replace ambiguous 'haswell_rt5640_' prefixes in favour of 'card_',
'link_' and other similar strings to clearly state which object given
member implements behavior for.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Rename haswell source file to hsw_rt5640

Rename source file to drop any ambiguity.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rockchip: i2s: switch BCLK to GPIO

Merge series from Judy Hsiao <judyhsiao@chromium.org>:

The patches series is to fix the unexpected large DC output
voltage of Max98357a that burns the speakers on the rockchip
platform when BCLK and SD_MODE are ON but LRCLK is OFF.

Add MT8186 ADSP dt-binding

Merge series from Tinghan Shen <tinghan.shen@mediatek.com>:

Some updates to the DT bindings to make things less surprising for
users.