review.tizen.org Git - platform/kernel/linux-starfive.git/log

net/mlx5e: Fix adding encap rules to slow path

On some devices the ignore flow level cap is not supported and we
shouldn't use it. Setting the dest ft with mlx5_chains_get_tc_end_ft()
already gives the correct end ft if ignore flow level cap is supported
or not.

Fixes: 39ac237ce009 ("net/mlx5: E-Switch, Refactor chains and priorities")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Check for needed capability for cvlan matching

If not supported show an error and return instead of trying to offload
to the hardware and fail.

Fixes: 699e96ddf47f ("net/mlx5e: Support offloading tc double vlan headers match")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Check firmware sync reset requested is set before trying to abort it

In case driver sent NACK to firmware on sync reset request, it will get
sync reset abort event while it didn't set sync reset requested mode.
Thus, on abort sync reset event handler, driver should check reset
requested is set before trying to stop sync reset poll.

Fixes: 7dd6df329d4c ("net/mlx5: Handle sync reset abort event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Disable TLS offload for uplink representor

TLS offload is not supported in switchdev mode.

Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Fix incompatible casting

Device supports setting of a single fec mode at a time, enforce this
by bitmap_weight == 1. Input from fec command is in u32, avoid cast to
unsigned long and use bitmap_from_arr32 to populate bitmap safely.

Fixes: 4bd9d5070b92 ("net/mlx5e: Enforce setting of a single FEC mode")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

MAINTAINERS: nfc mailing lists are subscribers-only

It looks as if the MAINTAINERS entries for the nfc mailing list
should be updated as I just got a "rejected" bounce from the nfc list.

-------
Your message to the Linux-nfc mailing-list was rejected for the following
reasons:

The message is not from a list member
-------

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ktls-use-after-free'

Maxim Mikityanskiy says:

====================
Fix use-after-free after the TLS device goes down and up

This small series fixes a use-after-free bug in the TLS offload code.
The first patch is a preparation for the second one, and the second is
the fix itself.

v2 changes:

Remove unneeded EXPORT_SYMBOL_GPL.
====================

Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/tls: Fix use-after-free after the TLS device goes down and up

When a netdev with active TLS offload goes down, tls_device_down is
called to stop the offload and tear down the TLS context. However, the
socket stays alive, and it still points to the TLS context, which is now
deallocated. If a netdev goes up, while the connection is still active,
and the data flow resumes after a number of TCP retransmissions, it will
lead to a use-after-free of the TLS context.

This commit addresses this bug by keeping the context alive until its
normal destruction, and implements the necessary fallbacks, so that the
connection can resume in software (non-offloaded) kTLS mode.

On the TX side tls_sw_fallback is used to encrypt all packets. The RX
side already has all the necessary fallbacks, because receiving
non-decrypted packets is supported. The thing needed on the RX side is
to block resync requests, which are normally produced after receiving
non-decrypted packets.

The necessary synchronization is implemented for a graceful teardown:
first the fallbacks are deployed, then the driver resources are released
(it used to be possible to have a tls_dev_resync after tls_dev_del).

A new flag called TLS_RX_DEV_DEGRADED is added to indicate the fallback
mode. It's used to skip the RX resync logic completely, as it becomes
useless, and some objects may be released (for example, resync_async,
which is allocated and freed by the driver).

Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/tls: Replace TLS_RX_SYNC_RUNNING with RCU

RCU synchronization is guaranteed to finish in finite time, unlike a
busy loop that polls a flag. This patch is a preparation for the bugfix
in the next patch, where the same synchronize_net() call will also be
used to sync with the TX datapath.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ethernet: myri10ge: Fix missing error code in myri10ge_probe()

The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'status'.

Eliminate the follow smatch warning:

drivers/net/ethernet/myricom/myri10ge/myri10ge.c:3818 myri10ge_probe()
warn: missing error code 'status'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'virtio_net-build_skb-fixes'

Xuan Zhuo says:

====================
virtio-net: fix for build_skb()

The logic of this piece is really messy. Fortunately, my refactored patch can be
completed with a small amount of testing.
====================

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio_net: get build_skb() buf by data ptr

In the case of merge, the page passed into page_to_skb() may be a head
page, not the page where the current data is located. So when trying to
get the buf where the data is located, we should get buf based on
headroom instead of offset.

This patch solves this problem. But if you don't use this patch, the
original code can also run, because if the page is not the page of the
current data, the calculated tailroom will be less than 0, and will not
enter the logic of build_skb() . The significance of this patch is to
modify this logical problem, allowing more situations to use
build_skb().

Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio-net: fix for unable to handle page fault for address

In merge mode, when xdp is enabled, if the headroom of buf is smaller
than virtnet_get_headroom(), xdp_linearize_page() will be called but the
variable of "headroom" is still 0, which leads to wrong logic after
entering page_to_skb().

[   16.600944] BUG: unable to handle page fault for address: ffffecbfff7b43c8[   16.602175] #PF: supervisor read access in kernel mode
[   16.603350] #PF: error_code(0x0000) - not-present page
[   16.604200] PGD 0 P4D 0
[   16.604686] Oops: 0000 [#1] SMP PTI
[   16.605306] CPU: 4 PID: 715 Comm: sh Tainted: G    B             5.12.0+ #312
[   16.606429] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/04
[   16.608217] RIP: 0010:unmap_page_range+0x947/0xde0
[   16.609014] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065
[   16.611863] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286
[   16.612720] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359
[   16.613853] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005
[   16.614976] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030
[   16.616124] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f
[   16.617276] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000
[   16.618423] FS:  0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000
[   16.619738] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.620670] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0
[   16.621792] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   16.622920] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   16.624047] Call Trace:
[   16.624525]  ? release_pages+0x24d/0x730
[   16.625209]  unmap_single_vma+0xa9/0x130
[   16.625885]  unmap_vmas+0x76/0xf0
[   16.626480]  exit_mmap+0xa0/0x210
[   16.627129]  mmput+0x67/0x180
[   16.627673]  do_exit+0x3d1/0xf10
[   16.628259]  ? do_user_addr_fault+0x231/0x840
[   16.629000]  do_group_exit+0x53/0xd0
[   16.629631]  __x64_sys_exit_group+0x1d/0x20
[   16.630354]  do_syscall_64+0x3c/0x80
[   16.630988]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   16.631828] RIP: 0033:0x7f1a043d0191
[   16.632464] Code: Unable to access opcode bytes at RIP 0x7f1a043d0167.
[   16.633502] RSP: 002b:00007ffe3d993308 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[   16.634737] RAX: ffffffffffffffda RBX: 00007f1a044c9490 RCX: 00007f1a043d0191
[   16.635857] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
[   16.636986] RBP: 0000000000000000 R08: ffffffffffffff88 R09: 0000000000000001
[   16.638120] R10: 0000000000000008 R11: 0000000000000246 R12: 00007f1a044c9490
[   16.639245] R13: 0000000000000001 R14: 00007f1a044c9968 R15: 0000000000000000
[   16.640408] Modules linked in:
[   16.640958] CR2: ffffecbfff7b43c8
[   16.641557] ---[ end trace bc4891c6ce46354c ]---
[   16.642335] RIP: 0010:unmap_page_range+0x947/0xde0
[   16.643135] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065
[   16.645983] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286
[   16.646845] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359
[   16.647970] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005
[   16.649091] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030
[   16.650250] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f
[   16.651394] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000
[   16.652529] FS:  0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000
[   16.653887] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.654841] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0
[   16.655992] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   16.657150] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   16.658290] Kernel panic - not syncing: Fatal exception
[   16.659613] Kernel Offset: disabled
[   16.660234] ---[ end Kernel panic - not syncing: Fatal exception ]---

Fixes: fb32856b16ad ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sock: fix in-kernel mark setting

This patch fixes the in-kernel mark setting by doing an additional
sk_dst_reset() which was introduced by commit 50254256f382 ("sock: Reset
dst when changing sk_mark via setsockopt"). The code is now shared to
avoid any further suprises when changing the socket mark value.

Fixes: 84d1c617402e ("net: sock: add sock_set_mark")
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: tag_8021q: fix the VLAN IDs used for encoding sub-VLANs

When using sub-VLANs in the range of 1-7, the resulting value from:

rx_vid = dsa_8021q_rx_vid_subvlan(ds, port, subvlan);

is wrong according to the description from tag_8021q.c:

| 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+-----------+-----+-----------------+-----------+-----------------------+
| DIR | SVL | SWITCH_ID | SUBVLAN | PORT |
+-----------+-----+-----------------+-----------+-----------------------+

For example, when ds->index == 0, port == 3 and subvlan == 1,
dsa_8021q_rx_vid_subvlan() returns 1027, same as it returns for
subvlan == 0, but it should have returned 1043.

This is because the low portion of the subvlan bits are not masked
properly when writing into the 12-bit VLAN value. They are masked into
bits 4:3, but they should be masked into bits 5:4.

Fixes: 3eaae1d05f2b ("net: dsa: tag_8021q: support up to 8 VLANs per port using sub-VLANs")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc: fix NULL ptr dereference in llcp_sock_getname() after failed connect

It's possible to trigger NULL pointer dereference by local unprivileged
user, when calling getsockname() after failed bind() (e.g. the bind
fails because LLCP_SAP_MAX used as SAP):

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  CPU: 1 PID: 426 Comm: llcp_sock_getna Not tainted 5.13.0-rc2-next-20210521+ #9
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1 04/01/2014
  Call Trace:
   llcp_sock_getname+0xb1/0xe0
   __sys_getpeername+0x95/0xc0
   ? lockdep_hardirqs_on_prepare+0xd5/0x180
   ? syscall_enter_from_user_mode+0x1c/0x40
   __x64_sys_getpeername+0x11/0x20
   do_syscall_64+0x36/0x70
   entry_SYSCALL_64_after_hwframe+0x44/0xae

This can be reproduced with Syzkaller C repro (bind followed by
getpeername):
https://syzkaller.appspot.com/x/repro.c?x=14def446e00000

Cc: <stable@vger.kernel.org>
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Reported-by: syzbot+80fb126e7f7d8b1a5914@syzkaller.appspotmail.com
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210531072138.5219-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: stmmac: fix kernel panic due to NULL pointer dereference of mdio_bus_data

Fixed link does not need mdio bus and in that case mdio_bus_data will
not be allocated. Before using mdio_bus_data we should check for NULL.

This patch fix the kernel panic due to NULL pointer dereference of
mdio_bus_data when it is not allocated.

Without this patch we do see following kernel crash caused due to kernel
NULL pointer dereference.

Call trace:
stmmac_dvr_probe+0x3c/0x10b0
dwc_eth_dwmac_probe+0x224/0x378
platform_probe+0x68/0xe0
really_probe+0x130/0x3d8
driver_probe_device+0x68/0xd0
device_driver_attach+0x74/0x80
__driver_attach+0x58/0xf8
bus_for_each_dev+0x7c/0xd8
driver_attach+0x24/0x30
bus_add_driver+0x148/0x1f0
driver_register+0x64/0x120
__platform_driver_register+0x28/0x38
dwc_eth_dwmac_driver_init+0x1c/0x28
do_one_initcall+0x78/0x158
kernel_init_freeable+0x1f0/0x244
kernel_init+0x14/0x118
ret_from_fork+0x10/0x30
Code: f9002bfb 9113e2d9 910e6273 aa0003f7 (f9405c78)
---[ end trace 32d9d41562ddc081 ]---

Fixes: e5e5b771f684 ("net: stmmac: make in-band AN mode parsing is supported for non-DT")
Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Link: https://lore.kernel.org/r/20210528071056.35252-1-sriranjani.p@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mptcp-fixes-for-5-13'

Mat Martineau says:

====================
mptcp: Fixes for 5.13

These patches address two issues in MPTCP.

Patch 1 fixes a locking issue affecting MPTCP-level retransmissions.

Patches 2-4 improve handling of out-of-order packet arrival early
in a connection, so it falls back to TCP rather than forcing a
reset. Includes a selftest.
====================

Link: https://lore.kernel.org/r/20210527233140.182728-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: update selftest for fallback due to OoO

The previous commit noted that we can have fallback
scenario due to OoO (or packet drop). Update the self-tests
accordingly

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: do not reset MP_CAPABLE subflow on mapping errors

When some mapping related errors occurs we close the main
MPC subflow with a RST. We should instead fallback gracefully
to TCP, and do the reset only for MPJ subflows.

Fixes: d22f4988ffec ("mptcp: process MP_CAPABLE data option")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/192
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: always parse mptcp options for MPC reqsk

In subflow_syn_recv_sock() we currently skip options parsing
for OoO packet, given that such packets may not carry the relevant
MPC option.

If the peer generates an MPC+data TSO packet and some of the early
segments are lost or get reorder, we server will ignore the peer key,
causing transient, unexpected fallback to TCP.

The solution is always parsing the incoming MPTCP options, and
do the fallback only for in-order packets. This actually cleans
the existing code a bit.

Fixes: d22f4988ffec ("mptcp: process MP_CAPABLE data option")
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: fix sk_forward_memory corruption on retransmission

MPTCP sk_forward_memory handling is a bit special, as such field
is protected by the msk socket spin_lock, instead of the plain
socket lock.

Currently we have a code path updating such field without handling
the relevant lock:

__mptcp_retrans() -> __mptcp_clean_una_wakeup()

Several helpers in __mptcp_clean_una_wakeup() will update
sk_forward_alloc, possibly causing such field corruption, as reported
by Matthieu.

Address the issue providing and using a new variant of blamed function
which explicitly acquires the msk spin lock.

Fixes: 64b9cea7a0af ("mptcp: fix spurious retransmissions")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/172
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes for net:

1) Fix incorrect sockopts unregistration from error path,
   from Florian Westphal.

2) A few patches to provide better error reporting when missing kernel
   netfilter options are missing in .config.

3) Fix dormant table flag updates.

4) Memleak in IPVS  when adding service with IP_VS_SVC_F_HASHED flag.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service
  netfilter: nf_tables: fix table flag updates
  netfilter: nf_tables: extended netlink error reporting for chain type
  netfilter: nf_tables: missing error reporting for not selected expressions
  netfilter: conntrack: unregister ipv4 sockopts on error unwind
====================

Link: https://lore.kernel.org/r/20210527190115.98503-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: act_ct: Fix ct template allocation for zone 0

Fix current behavior of skipping template allocation in case the
ct action is in zone 0.

Skipping the allocation may cause the datapath ct code to ignore the
entire ct action with all its attributes (commit, nat) in case the ct
action in zone 0 was preceded by a ct clear action.

The ct clear action sets the ct_state to untracked and resets the
skb->_nfct pointer. Under these conditions and without an allocated
ct template, the skb->_nfct pointer will remain NULL which will
cause the tc ct action handler to exit without handling commit and nat
actions, if such exist.

For example, the following rule in OVS dp:
recirc_id(0x2),ct_state(+new-est-rel-rpl+trk),ct_label(0/0x1), \
in_port(eth0),actions:ct_clear,ct(commit,nat(src=10.11.0.12)), \
recirc(0x37a)

Will result in act_ct skipping the commit and nat actions in zone 0.

The change removes the skipping of template allocation for zone 0 and
treats it the same as any other zone.

Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/20210526170110.54864-1-lariel@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: act_ct: Offload connections with commit action

Currently established connections are not offloaded if the filter has a
"ct commit" action. This behavior will not offload connections of the
following scenario:

$ tc_filter add dev $DEV ingress protocol ip prio 1 flower \
  ct_state -trk \
  action ct commit action goto chain 1

$ tc_filter add dev $DEV ingress protocol ip chain 1 prio 1 flower \
  action mirred egress redirect dev $DEV2

$ tc_filter add dev $DEV2 ingress protocol ip prio 1 flower \
  action ct commit action goto chain 1

$ tc_filter add dev $DEV2 ingress protocol ip prio 1 chain 1 flower \
  ct_state +trk+est \
  action mirred egress redirect dev $DEV

Offload established connections, regardless of the commit flag.

Fixes: 46475bb20f4b ("net/sched: act_ct: Software offload of established flows")
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Link: https://lore.kernel.org/r/1622029449-27060-1-git-send-email-paulb@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: Correct VIRTUAL port to not have phys_port attributes

Physical port name, port number attributes do not belong to virtual port
flavour. When VF or SF virtual ports are registered they incorrectly
append "np0" string in the netdevice name of the VF/SF.

Before this fix, VF netdevice name were ens2f0np0v0, ens2f0np0v1 for VF
0 and 1 respectively.

After the fix, they are ens2f0v0, ens2f0v1.

With this fix, reading /sys/class/net/ens2f0v0/phys_port_name returns
-EOPNOTSUPP.

Also devlink port show example for 2 VFs on one PF to ensure that any
physical port attributes are not exposed.

$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false
pci/0000:06:00.3/196608: type eth netdev ens2f0v0 flavour virtual splittable false
pci/0000:06:00.4/262144: type eth netdev ens2f0v1 flavour virtual splittable false

This change introduces a netdevice name change on systemd/udev
version 245 and higher which honors phys_port_name sysfs file for
generation of netdevice name.

This also aligns to phys_port_name usage which is limited to switchdev
ports as described in [1].

[1] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/tree/Documentation/networking/switchdev.rst

Fixes: acf1ee44ca5d ("devlink: Introduce devlink port flavour virtual")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20210526200027.14008-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service

syzbot reported memory leak [1] when adding service with
HASHED flag. We should ignore this flag both from sockopt
and netlink provided data, otherwise the service is not
hashed and not visible while releasing resources.

[1]
BUG: memory leak
unreferenced object 0xffff888115227800 (size 512):
  comm "syz-executor263", pid 8658, jiffies 4294951882 (age 12.560s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff83977188>] kmalloc include/linux/slab.h:556 [inline]
    [<ffffffff83977188>] kzalloc include/linux/slab.h:686 [inline]
    [<ffffffff83977188>] ip_vs_add_service+0x598/0x7c0 net/netfilter/ipvs/ip_vs_ctl.c:1343
    [<ffffffff8397d770>] do_ip_vs_set_ctl+0x810/0xa40 net/netfilter/ipvs/ip_vs_ctl.c:2570
    [<ffffffff838449a8>] nf_setsockopt+0x68/0xa0 net/netfilter/nf_sockopt.c:101
    [<ffffffff839ae4e9>] ip_setsockopt+0x259/0x1ff0 net/ipv4/ip_sockglue.c:1435
    [<ffffffff839fa03c>] raw_setsockopt+0x18c/0x1b0 net/ipv4/raw.c:857
    [<ffffffff83691f20>] __sys_setsockopt+0x1b0/0x360 net/socket.c:2117
    [<ffffffff836920f2>] __do_sys_setsockopt net/socket.c:2128 [inline]
    [<ffffffff836920f2>] __se_sys_setsockopt net/socket.c:2125 [inline]
    [<ffffffff836920f2>] __x64_sys_setsockopt+0x22/0x30 net/socket.c:2125
    [<ffffffff84350efa>] do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
    [<ffffffff84400068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

Reported-and-tested-by: syzbot+e562383183e4b1766930@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge tag 'net-5.13-rc4' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc4, including fixes from bpf, netfilter,
  can and wireless trees. Notably including fixes for the recently
  announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
  touching some core parts of the stack, too, but nothing hair-raising.

  Current release - regressions:

   - tipc: make node link identity publish thread safe

   - dsa: felix: re-enable TAS guard band mode

   - stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()

   - stmmac: fix system hang if change mac address after interface
     ifdown

  Current release - new code bugs:

   - mptcp: avoid OOB access in setsockopt()

   - bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers

   - ethtool: stats: fix a copy-paste error - init correct array size

  Previous releases - regressions:

   - sched: fix packet stuck problem for lockless qdisc

   - net: really orphan skbs tied to closing sk

   - mlx4: fix EEPROM dump support

   - bpf: fix alu32 const subreg bound tracking on bitwise operations

   - bpf: fix mask direction swap upon off reg sign change

   - bpf, offload: reorder offload callback 'prepare' in verifier

   - stmmac: Fix MAC WoL not working if PHY does not support WoL

   - packetmmap: fix only tx timestamp on request

   - tipc: skb_linearize the head skb when reassembling msgs

  Previous releases - always broken:

   - mac80211: address recent "FragAttacks" vulnerabilities

   - mac80211: do not accept/forward invalid EAPOL frames

   - mptcp: avoid potential error message floods

   - bpf, ringbuf: deny reserve of buffers larger than ringbuf to
     prevent out of buffer writes

   - bpf: forbid trampoline attach for functions with variable arguments

   - bpf: add deny list of functions to prevent inf recursion of tracing
     programs

   - tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT

   - can: isotp: prevent race between isotp_bind() and
     isotp_setsockopt()

   - netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
     fallback to non-AVX2 version

  Misc:

   - bpf: add kconfig knob for disabling unpriv bpf by default"

* tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits)
  net: phy: Document phydev::dev_flags bits allocation
  mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer
  mptcp: avoid error message on infinite mapping
  mptcp: drop unconditional pr_warn on bad opt
  mptcp: avoid OOB access in setsockopt()
  nfp: update maintainer and mailing list addresses
  net: mvpp2: add buffer header handling in RX
  bnx2x: Fix missing error code in bnx2x_iov_init_one()
  net: zero-initialize tc skb extension on allocation
  net: hns: Fix kernel-doc
  sctp: fix the proc_handler for sysctl encap_port
  sctp: add the missing setting for asoc encap_port
  bpf, selftests: Adjust few selftest result_unpriv outcomes
  bpf: No need to simulate speculative domain for immediates
  bpf: Fix mask direction swap upon off reg sign change
  bpf: Wrap aux data inside bpf_sanitize_info container
  bpf: Fix BPF_LSM kconfig symbol dependency
  selftests/bpf: Add test for l3 use of bpf_redirect_peer
  bpftool: Add sock_release help info for cgroup attach/prog load command
  net: dsa: microchip: enable phy errata workaround on 9567
  ...

net: phy: Document phydev::dev_flags bits allocation

Document the phydev::dev_flags bit allocation to allow bits 15:0 to
define PHY driver specific behavior, bits 23:16 to be reserved for now,
and bits 31:24 to hold generic PHY driver flags.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20210526184617.3105012-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mtd/fixes-for-5.13-rc4' of git://git./linux/kernel/git/mtd/linux

Pull MTD fixes from Miquel Raynal:
"MTD parsers:
   - Fix ofpart subpartitions parsing

  Raw NAND:
   - Fix external use of SW Hamming ECC helper (txx9ndfmc, tmio,
     sharpsl, ndfc, lpc32xx_slc, fsmc, cs553x)"

* tag 'mtd/fixes-for-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: parsers: ofpart: fix parsing subpartitions
  mtd: rawnand: txx9ndfmc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: tmio: Fix external use of SW Hamming ECC helper
  mtd: rawnand: sharpsl: Fix external use of SW Hamming ECC helper
  mtd: rawnand: ndfc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: lpc32xx_slc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: fsmc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: cs553x: Fix external use of SW Hamming ECC helper

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2021-05-26

The following pull-request contains BPF updates for your *net* tree.

We've added 14 non-merge commits during the last 14 day(s) which contain
a total of 17 files changed, 513 insertions(+), 231 deletions(-).

The main changes are:

1) Fix bpf_skb_change_head() helper to reset mac_len, from Jussi Maki.

2) Fix masking direction swap upon off-reg sign change, from Daniel Borkmann.

3) Fix BPF offloads in verifier by reordering driver callback, from Yinjun Zhang.

4) BPF selftest for ringbuf mmap ro/rw restrictions, from Andrii Nakryiko.

5) Follow-up fixes to nested bprintf per-cpu buffers, from Florent Revest.

6) Fix bpftool sock_release attach point help info, from Liu Jian.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mptcp-fixes'

Mat Martineau says:

====================
MPTCP fixes

Here are a few fixes for the -net tree.

Patch 1 fixes an attempt to access a tcp-specific field that does not
exist in mptcp sockets.

Patches 2 and 3 remove warning/error log output that could be flooded.

Patch 4 performs more validation on address advertisement echo packets
to improve RFC 8684 compliance.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer

when Linux receives an echo-ed ADD_ADDR, it checks the IP address against
the list of "announced" addresses. In case of a positive match, the timer
that handles retransmissions is stopped regardless of the 'Address Id' in
the received packet: this behaviour does not comply with RFC8684 3.4.1.

Fix it by validating the 'Address Id' in received echo-ed ADD_ADDRs.
Tested using packetdrill, with the following captured output:

unpatched kernel:

Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0
In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 3013740213], length 0
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0
In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 3013740213], length 0
        ^^^ retransmission is stopped here, but 'Address Id' is 90

patched kernel:

Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 1672384568], length 0
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 1672384568], length 0
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 198.51.100.2,mptcp dss ack 1672384568], length 0
        ^^^ retransmission is stopped here, only when both 'Address Id' and 'IP Address' match

Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: avoid error message on infinite mapping

Another left-over. Avoid flooding dmesg with useless text,
we already have a MIB for that event.

Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: drop unconditional pr_warn on bad opt

This is a left-over of early day. A malicious peer can flood
the kernel logs with useless messages, just drop it.

Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: avoid OOB access in setsockopt()

We can't use tcp_set_congestion_control() on an mptcp socket, as
such function can end-up accessing a tcp-specific field -
prior_ssthresh - causing an OOB access.

To allow propagating the correct ca algo on subflow, cache the ca
name at initialization time.

Additionally avoid overriding the user-selected CA (if any) at
clone time.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/182
Fixes: aa1fbd94e5c7 ("mptcp: sockopt: add TCP_CONGESTION and TCP_INFO")
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: update maintainer and mailing list addresses

Some of Netronome's activities and people have moved over to Corigine,
including NFP driver maintenance and myself.

Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: add buffer header handling in RX

If Link Partner sends frames larger than RX buffer size, MAC mark it
as oversize but still would pass it to the Packet Processor.
In this scenario, Packet Processor scatter frame between multiple buffers,
but only a single buffer would be returned to the Buffer Manager pool and
it would not refill the poll.

Patch add handling of oversize error with buffer header handling, so all
buffers would be returned to the Buffer Manager pool.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Fix missing error code in bnx2x_iov_init_one()

Eliminate the follow smatch warning:

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227
bnx2x_iov_init_one() warn: missing error code 'err'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: zero-initialize tc skb extension on allocation

Function skb_ext_add() doesn't initialize created skb extension with any
value and leaves it up to the user. However, since extension of type
TC_SKB_EXT originally contained only single value tc_skb_ext->chain its
users used to just assign the chain value without setting whole extension
memory to zero first. This assumption changed when TC_SKB_EXT extension was
extended with additional fields but not all users were updated to
initialize the new fields which leads to use of uninitialized memory
afterwards. UBSAN log:

[  778.299821] UBSAN: invalid-load in net/openvswitch/flow.c:899:28
[  778.301495] load of value 107 is not a valid value for type '_Bool'
[  778.303215] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7+ #2
[  778.304933] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  778.307901] Call Trace:
[  778.308680]  <IRQ>
[  778.309358]  dump_stack+0xbb/0x107
[  778.310307]  ubsan_epilogue+0x5/0x40
[  778.311167]  __ubsan_handle_load_invalid_value.cold+0x43/0x48
[  778.312454]  ? memset+0x20/0x40
[  778.313230]  ovs_flow_key_extract.cold+0xf/0x14 [openvswitch]
[  778.314532]  ovs_vport_receive+0x19e/0x2e0 [openvswitch]
[  778.315749]  ? ovs_vport_find_upcall_portid+0x330/0x330 [openvswitch]
[  778.317188]  ? create_prof_cpu_mask+0x20/0x20
[  778.318220]  ? arch_stack_walk+0x82/0xf0
[  778.319153]  ? secondary_startup_64_no_verify+0xb0/0xbb
[  778.320399]  ? stack_trace_save+0x91/0xc0
[  778.321362]  ? stack_trace_consume_entry+0x160/0x160
[  778.322517]  ? lock_release+0x52e/0x760
[  778.323444]  netdev_frame_hook+0x323/0x610 [openvswitch]
[  778.324668]  ? ovs_netdev_get_vport+0xe0/0xe0 [openvswitch]
[  778.325950]  __netif_receive_skb_core+0x771/0x2db0
[  778.327067]  ? lock_downgrade+0x6e0/0x6f0
[  778.328021]  ? lock_acquire+0x565/0x720
[  778.328940]  ? generic_xdp_tx+0x4f0/0x4f0
[  778.329902]  ? inet_gro_receive+0x2a7/0x10a0
[  778.330914]  ? lock_downgrade+0x6f0/0x6f0
[  778.331867]  ? udp4_gro_receive+0x4c4/0x13e0
[  778.332876]  ? lock_release+0x52e/0x760
[  778.333808]  ? dev_gro_receive+0xcc8/0x2380
[  778.334810]  ? lock_downgrade+0x6f0/0x6f0
[  778.335769]  __netif_receive_skb_list_core+0x295/0x820
[  778.336955]  ? process_backlog+0x780/0x780
[  778.337941]  ? mlx5e_rep_tc_netdevice_event_unregister+0x20/0x20 [mlx5_core]
[  778.339613]  ? seqcount_lockdep_reader_access.constprop.0+0xa7/0xc0
[  778.341033]  ? kvm_clock_get_cycles+0x14/0x20
[  778.342072]  netif_receive_skb_list_internal+0x5f5/0xcb0
[  778.343288]  ? __kasan_kmalloc+0x7a/0x90
[  778.344234]  ? mlx5e_handle_rx_cqe_mpwrq+0x9e0/0x9e0 [mlx5_core]
[  778.345676]  ? mlx5e_xmit_xdp_frame_mpwqe+0x14d0/0x14d0 [mlx5_core]
[  778.347140]  ? __netif_receive_skb_list_core+0x820/0x820
[  778.348351]  ? mlx5e_post_rx_mpwqes+0xa6/0x25d0 [mlx5_core]
[  778.349688]  ? napi_gro_flush+0x26c/0x3c0
[  778.350641]  napi_complete_done+0x188/0x6b0
[  778.351627]  mlx5e_napi_poll+0x373/0x1b80 [mlx5_core]
[  778.352853]  __napi_poll+0x9f/0x510
[  778.353704]  ? mlx5_flow_namespace_set_mode+0x260/0x260 [mlx5_core]
[  778.355158]  net_rx_action+0x34c/0xa40
[  778.356060]  ? napi_threaded_poll+0x3d0/0x3d0
[  778.357083]  ? sched_clock_cpu+0x18/0x190
[  778.358041]  ? __common_interrupt+0x8e/0x1a0
[  778.359045]  __do_softirq+0x1ce/0x984
[  778.359938]  __irq_exit_rcu+0x137/0x1d0
[  778.360865]  irq_exit_rcu+0xa/0x20
[  778.361708]  common_interrupt+0x80/0xa0
[  778.362640]  </IRQ>
[  778.363212]  asm_common_interrupt+0x1e/0x40
[  778.364204] RIP: 0010:native_safe_halt+0xe/0x10
[  778.365273] Code: 4f ff ff ff 4c 89 e7 e8 50 3f 40 fe e9 dc fe ff ff 48 89 df e8 43 3f 40 fe eb 90 cc e9 07 00 00 00 0f 00 2d 74 05 62 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 64 05 62 00 f4 c3 cc cc 0f 1f 44 00
[  778.369355] RSP: 0018:ffffffff84407e48 EFLAGS: 00000246
[  778.370570] RAX: ffff88842de46a80 RBX: ffffffff84425840 RCX: ffffffff83418468
[  778.372143] RDX: 000000000026f1da RSI: 0000000000000004 RDI: ffffffff8343af5e
[  778.373722] RBP: fffffbfff0884b08 R08: 0000000000000000 R09: ffff88842de46bcb
[  778.375292] R10: ffffed1085bc8d79 R11: 0000000000000001 R12: 0000000000000000
[  778.376860] R13: ffffffff851124a0 R14: 0000000000000000 R15: dffffc0000000000
[  778.378491]  ? rcu_eqs_enter.constprop.0+0xb8/0xe0
[  778.379606]  ? default_idle_call+0x5e/0xe0
[  778.380578]  default_idle+0xa/0x10
[  778.381406]  default_idle_call+0x96/0xe0
[  778.382350]  do_idle+0x3d4/0x550
[  778.383153]  ? arch_cpu_idle_exit+0x40/0x40
[  778.384143]  cpu_startup_entry+0x19/0x20
[  778.385078]  start_kernel+0x3c7/0x3e5
[  778.385978]  secondary_startup_64_no_verify+0xb0/0xbb

Fix the issue by providing new function tc_skb_ext_alloc() that allocates
tc skb extension and initializes its memory to 0 before returning it to the
caller. Change all existing users to use new API instead of calling
skb_ext_add() directly.

Fixes: 038ebb1a713d ("net/sched: act_ct: fix miss set mru for ovs after defrag in act_ct")
Fixes: d29334c15d33 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns: Fix kernel-doc

Fix function name in hns_ethtool.c kernel-doc comment
to remove these warnings found by clang_w1.

drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:202: warning: expecting
prototype for hns_nic_set_link_settings(). Prototype was for
hns_nic_set_link_ksettings() instead.
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:837: warning: expecting
prototype for get_ethtool_stats(). Prototype was for
hns_get_ethtool_stats() instead.
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:894: warning:
expecting prototype for get_strings(). Prototype was for
hns_get_strings() instead.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 'commit 262b38cdb3e4 ("net: ethernet: hisilicon: hns: use phydev
from struct net_device")'
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix the proc_handler for sysctl encap_port

proc_dointvec() cannot do min and max check for setting a value
when extra1/extra2 is set, so change it to proc_dointvec_minmax()
for sysctl encap_port.

Fixes: e8a3001c2120 ("sctp: add encap_port for netns sock asoc and transport")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: add the missing setting for asoc encap_port

This patch is to add the missing setting back for asoc encap_port.

Fixes: 8dba29603b5c ("sctp: add SCTP_REMOTE_UDP_ENCAPS_PORT sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

proc: Check /proc/$pid/attr/ writes against file opener

Fix another "confused deputy" weakness[1]. Writes to /proc/$pid/attr/
files need to check the opener credentials, since these fds do not
transition state across execve(). Without this, it is possible to
trick another process (which may have different credentials) to write
to its own /proc/$pid/attr/ files, leading to unexpected and possibly
exploitable behaviors.

[1] https://www.kernel.org/doc/html/latest/security/credentials.html?highlight=confused#open-file-credentials

Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bpf, selftests: Adjust few selftest result_unpriv outcomes

Given we don't need to simulate the speculative domain for registers with
immediates anymore since the verifier uses direct imm-based rewrites instead
of having to mask, we can also lift a few cases that were previously rejected.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>

bpf: No need to simulate speculative domain for immediates

In 801c6058d14a ("bpf: Fix leakage of uninitialized bpf stack under
speculation") we replaced masking logic with direct loads of immediates
if the register is a known constant. Given in this case we do not apply
any masking, there is also no reason for the operation to be truncated
under the speculative domain.

Therefore, there is also zero reason for the verifier to branch-off and
simulate this case, it only needs to do it for unknown but bounded scalars.
As a side-effect, this also enables few test cases that were previously
rejected due to simulation under zero truncation.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

bpf: Fix mask direction swap upon off reg sign change

Masking direction as indicated via mask_to_left is considered to be
calculated once and then used to derive pointer limits. Thus, this
needs to be placed into bpf_sanitize_info instead so we can pass it
to sanitize_ptr_alu() call after the pointer move. Piotr noticed a
corner case where the off reg causes masking direction change which
then results in an incorrect final aux->alu_limit.

Fixes: 7fedb63a8307 ("bpf: Tighten speculative pointer arithmetic mask")
Reported-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

bpf: Wrap aux data inside bpf_sanitize_info container

Add a container structure struct bpf_sanitize_info which holds
the current aux info, and update call-sites to sanitize_ptr_alu()
to pass it in. This is needed for passing in additional state
later on.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

bpf: Fix BPF_LSM kconfig symbol dependency

Similarly as 6bdacdb48e94 ("bpf: Fix BPF_JIT kconfig symbol dependency") we
need to detangle the hard BPF_LSM dependency on NET. This was previously
implicit by its dependency on BPF_JIT which itself was dependent on NET (but
without any actual/real hard dependency code-wise). Given the latter was
lifted, so should be the former as BPF_LSMs could well exist on net-less
systems. This therefore also fixes a randconfig build error recently reported
by Randy:

  ld: kernel/bpf/bpf_lsm.o: in function `bpf_lsm_func_proto':
  bpf_lsm.c:(.text+0x1a0): undefined reference to `bpf_sk_storage_get_proto'
  ld: bpf_lsm.c:(.text+0x1b8): undefined reference to `bpf_sk_storage_delete_proto'
  [...]

Fixes: b24abcff918a ("bpf, kconfig: Add consolidated menu entry for bpf with core options")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>

Merge tag 'netfs-lib-fixes-20200525' of git://git./linux/kernel/git/dhowells/linux-fs

Pull netfs fixes from David Howells:
"A couple of fixes to the new netfs lib:

   - Pass the AOP flags through from netfs_write_begin() into
     grab_cache_page_write_begin().

   - Automatically enable in Kconfig netfs lib rather than presenting an
     option for manual enablement"

* tag 'netfs-lib-fixes-20200525' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  netfs: Make CONFIG_NETFS_SUPPORT auto-selected rather than manual
  netfs: Pass flags through to grab_cache_page_write_begin()

afs: Fix fall-through warnings for Clang

In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple fallthrough pseudo-keywords in
places where the code is intended to fall through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-hardening@vger.kernel.org
Link: https://lore.kernel.org/r/51150b54e0b0431a2c401cd54f2c4e7f50e94601.1605896059.git.gustavoars@kernel.org/
Link: https://lore.kernel.org/r/20210420211615.GA51432@embeddedor/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests/bpf: Add test for l3 use of bpf_redirect_peer

Add a test case for using bpf_skb_change_head() in combination with
bpf_redirect_peer() to redirect a packet from a L3 device to veth and back.

The test uses a BPF program that adds L2 headers to the packet coming
from a L3 device and then calls bpf_redirect_peer() to redirect the packet
to a veth device. The test fails as skb->mac_len is not set properly and
thus the ethernet headers are not properly skb_pull'd in cls_bpf_classify(),
causing tcp_v4_rcv() to point the TCP header into middle of the IP header.

Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210525102955.2811090-1-joamaki@gmail.com

bpftool: Add sock_release help info for cgroup attach/prog load command

The help information was not added at the time when the function got added.
Fix this and add the missing information to its cli, documentation and bash
completion.

Fixes: db94cc0b4805 ("bpftool: Add support for BPF_CGROUP_INET_SOCK_RELEASE")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210525014139.323859-1-liujian56@huawei.com

netfs: Make CONFIG_NETFS_SUPPORT auto-selected rather than manual

Make the netfs helper library selected automatically by the things that use
it rather than being manually configured, even though it's required[1].

Fixes: 3a5829fefd3b ("netfs: Make a netfs helper module")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/CAMuHMdXJZ7iNQE964CdBOU=vRKVMFzo=YF_eiwsGgqzuvZ+TuA@mail.gmail.com
Link: https://lore.kernel.org/r/162090298141.3166007.2971118149366779916.stgit@warthog.procyon.org.uk

netfs: Pass flags through to grab_cache_page_write_begin()

In netfs_write_begin(), pass the AOP flags through to
grab_cache_page_write_begin() so that a request to use GFP_NOFS is
honoured.

Fixes: e1b1240c1ff5 ("netfs: Add write_begin helper")
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/162090295383.3165945.13595101698295243662.stgit@warthog.procyon.org.uk

Merge tag 'perf-tools-fixes-for-v5.13-2021-05-24' of git://git./linux/kernel/git/acme/linux

Pull perf tool fixes from Arnaldo Carvalho de Melo:

- Fix 'perf script' decoding of Intel PT traces for abort handling and
   sample instruction bytes.

- Add missing PERF_IP_FLAG_CHARS for VM-Entry and VM-Exit to Intel PT
   'perf script' decoder.

- Fixes for the python based Intel PT trace viewer GUI.

- Sync UAPI copies (unwire quotactl_path, some comment fixes).

- Fix handling of missing kernel software events, such as the recently
   added 'cgroup-switches', and add the trivial glue for it in the
   tooling side, since it was added in this merge window.

- Add missing initialization of zstd_data in 'perf buildid-list',
   detected with valgrind's memcheck.

- Remove needless event enable/disable when all events uses BPF.

- Fix libpfm4 support (63) test error for nested event groups.

* tag 'perf-tools-fixes-for-v5.13-2021-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf stat: Skip evlist__[enable|disable] when all events uses BPF
  perf script: Add missing PERF_IP_FLAG_CHARS for VM-Entry and VM-Exit
  perf scripts python: exported-sql-viewer.py: Fix warning display
  perf scripts python: exported-sql-viewer.py: Fix Array TypeError
  perf scripts python: exported-sql-viewer.py: Fix copy to clipboard from Top Calls by elapsed Time report
  tools headers UAPI: Sync files changed by the quotactl_path unwiring
  tools headers UAPI: Sync linux/perf_event.h with the kernel sources
  tools headers UAPI: Sync linux/fs.h with the kernel sources
  perf parse-events: Check if the software events array slots are populated
  perf tools: Add 'cgroup-switches' software event
  perf intel-pt: Remove redundant setting of ptq->insn_len
  perf intel-pt: Fix sample instruction bytes
  perf intel-pt: Fix transaction abort handling
  perf test: Fix libpfm4 support (63) test error for nested event groups
  tools arch kvm: Sync kvm headers with the kernel sources
  perf buildid-list: Initialize zstd_data

net: dsa: microchip: enable phy errata workaround on 9567

Also enable phy errata workaround on 9567 since has the same errata as
the 9477 according to the manufacture's documentation.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: fix memory leak in smsc75xx_bind

Syzbot reported memory leak in smsc75xx_bind().
The problem was is non-freed memory in case of
errors after memory allocation.

backtrace:
  [<ffffffff84245b62>] kmalloc include/linux/slab.h:556 [inline]
  [<ffffffff84245b62>] kzalloc include/linux/slab.h:686 [inline]
  [<ffffffff84245b62>] smsc75xx_bind+0x7a/0x334 drivers/net/usb/smsc75xx.c:1460
  [<ffffffff82b5b2e6>] usbnet_probe+0x3b6/0xc30 drivers/net/usb/usbnet.c:1728

Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver")
Cc: stable@kernel.vger.org
Reported-and-tested-by: syzbot+b558506ba8165425fee2@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hsr: fix mac_len checks

Commit 2e9f60932a2c ("net: hsr: check skb can contain struct hsr_ethhdr
in fill_frame_info") added the following which resulted in -EINVAL
always being returned:
if (skb->mac_len < sizeof(struct hsr_ethhdr))
return -EINVAL;

mac_len was not being set correctly so this check completely broke
HSR/PRP since it was always 14, not 20.

Set mac_len correctly and modify the mac_len checks to test in the
correct places since sometimes it is legitimately 14.

Fixes: 2e9f60932a2c ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info")
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: appletalk: cops: Fix data race in cops_probe1

In cops_probe1(), there is a write to dev->base_addr after requesting an
interrupt line and registering the interrupt handler cops_interrupt().
The handler might be called in parallel to handle an interrupt.
cops_interrupt() tries to read dev->base_addr leading to a potential
data race. So write to dev->base_addr before calling request_irq().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Saubhik Mukherjee <saubhik.mukherjee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sja1105-fixes'

Vladimir Oltean says:

====================
Fixes for SJA1105 DSA driver

This series contains some minor fixes in the sja1105 driver:
- improved error handling in the probe path
- rejecting an invalid phy-mode specified in the device tree
- register access fix for SJA1105P/Q/R/S for the virtual links through
  the dynamic reconfiguration interface
- handling 2 bridge VLANs where the second is supposed to overwrite the
  first
- making sure that the lack of a pvid results in the actual dropping of
  untagged traffic
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: update existing VLANs from the bridge VLAN list

When running this sequence of operations:

ip link add br0 type bridge vlan_filtering 1
ip link set swp4 master br0
bridge vlan add dev swp4 vid 1

We observe the traffic sent on swp4 is still untagged, even though the
bridge has overwritten the existing VLAN entry:

port    vlan ids
swp4     1 PVID

br0      1 PVID Egress Untagged

This happens because we didn't consider that the 'bridge vlan add'
command just overwrites VLANs like it's nothing. We treat the 'vid 1
pvid untagged' and the 'vid 1' as two separate VLANs, and the first
still has precedence when calling sja1105_build_vlan_table. Obviously
there is a disagreement regarding semantics, and we end up doing
something unexpected from the PoV of the bridge.

Let's actually consider an "existing VLAN" to be one which is on the
same port, and has the same VLAN ID, as one we already have, and update
it if it has different flags than we do.

The first blamed commit is the one introducing the bug, the second one
is the latest on top of which the bugfix still applies.

Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method")
Fixes: 5899ee367ab3 ("net: dsa: tag_8021q: add a context structure")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: use 4095 as the private VLAN for untagged traffic

One thing became visible when writing the blamed commit, and that was
that STP and PTP frames injected by net/dsa/tag_sja1105.c using the
deferred xmit mechanism are always classified to the pvid of the CPU
port, regardless of whatever VLAN there might be in these packets.

So a decision needed to be taken regarding the mechanism through which
we should ensure that delivery of STP and PTP traffic is possible when
we are in a VLAN awareness mode that involves tag_8021q. This is because
tag_8021q is not concerned with managing the pvid of the CPU port, since
as far as tag_8021q is concerned, no traffic should be sent as untagged
from the CPU port. So we end up not actually having a pvid on the CPU
port if we only listen to tag_8021q, and unless we do something about it.

The decision taken at the time was to keep VLAN 1 in the list of
priv->dsa_8021q_vlans, and make it a pvid of the CPU port. This ensures
that STP and PTP frames can always be sent to the outside world.

However there is a problem. If we do the following while we are in
the best_effort_vlan_filtering=true mode:

ip link add br0 type bridge vlan_filtering 1
ip link set swp2 master br0
bridge vlan del dev swp2 vid 1

Then untagged and pvid-tagged frames should be dropped. But we observe
that they aren't, and this is because of the precaution we took that VID
1 is always installed on all ports.

So clearly VLAN 1 is not good for this purpose. What about VLAN 0?
Well, VLAN 0 is managed by the 8021q module, and that module wants to
ensure that 802.1p tagged frames are always received by a port, and are
always transmitted as VLAN-tagged (with VLAN ID 0). Whereas we want our
STP and PTP frames to be untagged if the stack sent them as untagged -
we don't want the driver to just decide out of the blue that it adds
VID 0 to some packets.

So what to do?

Well, there is one other VLAN that is reserved, and that is 4095:
$ ip link add link swp2 name swp2.4095 type vlan id 4095
Error: 8021q: Invalid VLAN id.
$ bridge vlan add dev swp2 vid 4095
Error: bridge: Vlan id is invalid.

After we made this change, VLAN 1 is indeed forwarded and/or dropped
according to the bridge VLAN table, there are no further alterations
done by the sja1105 driver.

Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: error out on unsupported PHY mode

The driver continues probing when a port is configured for an
unsupported PHY interface type, instead it should stop.

Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: add error handling in sja1105_setup()

If any of sja1105_static_config_load(), sja1105_clocking_setup() or
sja1105_devlink_setup() fails, we can't just return in the middle of
sja1105_setup() or memory will leak. Add a cleanup path.

Fixes: 0a7bdbc23d8a ("net: dsa: sja1105: move devlink param code to sja1105_devlink.c")
Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: call dsa_unregister_switch when allocating memory fails

Unlike other drivers which pretty much end their .probe() execution with
dsa_register_switch(), the sja1105 does some extra stuff. When that
fails with -ENOMEM, the driver is quick to return that, forgetting to
call dsa_unregister_switch(). Not critical, but a bug nonetheless.

Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Fixes: a68578c20a96 ("net: dsa: Make deferred_xmit private to sja1105")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: fix VL lookup command packing for P/Q/R/S

At the beginning of the sja1105_dynamic_config.c file there is a diagram
of the dynamic config interface layout:

packed_buf

|
V
+-----------------------------------------+------------------+
| ENTRY BUFFER | COMMAND BUFFER |
+-----------------------------------------+------------------+

<----------------------- packed_size ------------------------>

So in order to pack/unpack the command bits into the buffer,
sja1105_vl_lookup_cmd_packing must first advance the buffer pointer by
the length of the entry. This is similar to what the other *cmd_packing
functions do.

This bug exists because the command packing function for P/Q/R/S was
copied from the E/T generation, and on E/T, the command was actually
embedded within the entry buffer itself.

Fixes: 94f94d4acfb2 ("net: dsa: sja1105: add static tables for virtual links")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hso: fix control-request directions

The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.

Fix the tiocmset and rfkill requests which erroneously used
usb_rcvctrlpipe().

Fixes: 72dc1c096c70 ("HSO: add option hso driver")
Cc: stable@vger.kernel.org # 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8152: check the informaton of the device

Verify some fields of the USB descriptor to make sure the driver
could be used by the device.

Besides, remove the check of endpoint number in rtl8152_probe().
usb_find_common_endpoints() includes it.

BugLink: https://syzkaller.appspot.com/bug?id=912c9c373656996801b4de61f1e3cb326fe940aa
Reported-by: syzbot+95afd23673f5dd295c57@syzkaller.appspotmail.com
Fixes: c2198943e33b ("r8152: search the configuration of vendor mode")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_dsmark: fix a NULL deref in qdisc_reset()

If Qdisc_ops->init() is failed, Qdisc_ops->reset() would be called.
When dsmark_init(Qdisc_ops->init()) is failed, it possibly doesn't
initialize dsmark_qdisc_data->q. But dsmark_reset(Qdisc_ops->reset())
uses dsmark_qdisc_data->q pointer wihtout any null checking.
So, panic would occur.

Test commands:
    sysctl net.core.default_qdisc=dsmark -w
    ip link add dummy0 type dummy
    ip link add vw0 link dummy0 type virt_wifi
    ip link set vw0 up

Splat looks like:
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 3 PID: 684 Comm: ip Not tainted 5.12.0+ #910
RIP: 0010:qdisc_reset+0x2b/0x680
Code: 1f 44 00 00 48 b8 00 00 00 00 00 fc ff df 41 57 41 56 41 55 41 54
55 48 89 fd 48 83 c7 18 53 48 89 fa 48 c1 ea 03 48 83 ec 20 <80> 3c 02
00 0f 85 09 06 00 00 4c 8b 65 18 0f 1f 44 00 00 65 8b 1d
RSP: 0018:ffff88800fda6bf8 EFLAGS: 00010282
RAX: dffffc0000000000 RBX: ffff8880050ed800 RCX: 0000000000000000
RDX: 0000000000000003 RSI: ffffffff99e34100 RDI: 0000000000000018
RBP: 0000000000000000 R08: fffffbfff346b553 R09: fffffbfff346b553
R10: 0000000000000001 R11: fffffbfff346b552 R12: ffffffffc0824940
R13: ffff888109e83800 R14: 00000000ffffffff R15: ffffffffc08249e0
FS:  00007f5042287680(0000) GS:ffff888119800000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055ae1f4dbd90 CR3: 0000000006760002 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? rcu_read_lock_bh_held+0xa0/0xa0
dsmark_reset+0x3d/0xf0 [sch_dsmark]
qdisc_reset+0xa9/0x680
qdisc_destroy+0x84/0x370
qdisc_create_dflt+0x1fe/0x380
attach_one_default_qdisc.constprop.41+0xa4/0x180
dev_activate+0x4d5/0x8c0
? __dev_open+0x268/0x390
__dev_open+0x270/0x390

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-5.13-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup fixes from Tejun Heo:

- "cgroup_disable=" boot param was being applied too late confusing
   some subsystems. Fix it by moving application to __setup() time.

- Comment spelling fixes. Included here to lower the chance of trivial
   future merge conflicts.

* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: fix spelling mistakes
  cgroup: disable controllers at parse time

Merge branch 'for-5.13-fixes' of git://git./linux/kernel/git/tj/wq

Pull workqueue fix from Tejun Heo:
"One commit to fix spurious workqueue stall warnings across VM
suspensions"

* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
wq: handle VM suspension in stall detection

Merge tag 'spi-fix-v5.13-rc3' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
"There's some device specific fixes here but also an unusually large
  number of fixes for the core, including both fixes for breakage
  introduced on ACPI systems while fixing the long standing confusion
  about the polarity of GPIO chip selects specified through DT, and
  fixes for ordering issues on unregistration which have been exposed
  through the wider usage of devm_."

* tag 'spi-fix-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: sc18is602: implement .max_{transfer,message}_size() for the controller
  spi: sc18is602: don't consider the chip select byte in sc18is602_check_transfer
  MAINTAINERS: Add Alain Volmat as STM32 SPI maintainer
  dt-bindings: spi: spi-mux: rename flash node
  spi: Don't have controller clean up spi device before driver unbind
  spi: Assume GPIO CS active high in ACPI case
  spi: sprd: Add missing MODULE_DEVICE_TABLE
  spi: Switch to signed types for *_native_cs SPI controller fields
  spi: take the SPI IO-mutex in the spi_set_cs_timing method
  spi: spi-fsl-dspi: Fix a resource leak in an error handling path
  spi: spi-zynq-qspi: Fix stack violation bug
  spi: spi-zynq-qspi: Fix kernel-doc warning
  spi: altera: Make SPI_ALTERA_CORE invisible
  spi: Fix spi device unregister flow

cgroup: fix spelling mistakes

Fix some spelling mistakes in comments:
hierarhcy ==> hierarchy
automtically ==> automatically
overriden ==> overridden
In absense of .. or ==> In absence of .. and
assocaited ==> associated
taget ==> target
initate ==> initiate
succeded ==> succeeded
curremt ==> current
udpated ==> updated

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

netfilter: nf_tables: fix table flag updates

The dormant flag need to be updated from the preparation phase,
otherwise, two consecutive requests to dorm a table in the same batch
might try to remove the same hooks twice, resulting in the following
warning:

hook not found, pf 3 num 0
WARNING: CPU: 0 PID: 334 at net/netfilter/core.c:480 __nf_unregister_net_hook+0x1eb/0x610 net/netfilter/core.c:480
Modules linked in:
CPU: 0 PID: 334 Comm: kworker/u4:5 Not tainted 5.12.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:__nf_unregister_net_hook+0x1eb/0x610 net/netfilter/core.c:480

This patch is a partial revert of 0ce7cf4127f1 ("netfilter: nftables:
update table flags from the commit phase") to restore the previous
behaviour.

However, there is still another problem: A batch containing a series of
dorm-wakeup-dorm table and vice-versa also trigger the warning above
since hook unregistration happens from the preparation phase, while hook
registration occurs from the commit phase.

To fix this problem, this patch adds two internal flags to annotate the
original dormant flag status which are __NFT_TABLE_F_WAS_DORMANT and
__NFT_TABLE_F_WAS_AWAKEN, to restore it from the abort path.

The __NFT_TABLE_F_UPDATE bitmask allows to handle the dormant flag update
with one single transaction.

Reported-by: syzbot+7ad5cd1615f2d89c6e7e@syzkaller.appspotmail.com
Fixes: 0ce7cf4127f1 ("netfilter: nftables: update table flags from the commit phase")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

NFC: nfcmrvl: fix kernel-doc syntax in file headers

The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for drivers/nfc/nfcmrvl follows this syntax, but the content
inside does not comply with kernel-doc.

This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc.
For e.g., running scripts/kernel-doc -none on drivers/nfc/nfcmrvl/spi.c
causes warning:
warning: expecting prototype for Marvell NFC(). Prototype was for SPI_WAIT_HANDSHAKE() instead

Provide a simple fix by replacing such occurrences with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.

Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mt7530: fix VLAN traffic leaks

PCR_MATRIX field was set to all 1's when VLAN filtering is enabled, but
was not reset when it is disabled, which may cause traffic leaks:

ip link add br0 type bridge vlan_filtering 1
ip link add br1 type bridge vlan_filtering 1
ip link set swp0 master br0
ip link set swp1 master br1
ip link set br0 type bridge vlan_filtering 0
ip link set br1 type bridge vlan_filtering 0
# traffic in br0 and br1 will start leaking to each other

As port_bridge_{add,del} have set up PCR_MATRIX properly, remove the
PCR_MATRIX write from mt7530_port_set_vlan_aware.

Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'fq_pie-fixes'

Davide Caratti says:

====================
two fixes for the fq_pie scheduler

- patch 1/2 restores the possibility to use 65536 flows with fq_pie,
  preserving the fix for an endless loop in the control plane
- patch 2/2 fixes an OOB access that can be observed in the traffic
  path of fq_pie scheduler, when the classification selects a flow
  beyond the allocated space.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: fq_pie: fix OOB access in the traffic path

the following script:

  # tc qdisc add dev eth0 handle 0x1 root fq_pie flows 2
  # tc qdisc add dev eth0 clsact
  # tc filter add dev eth0 egress matchall action skbedit priority 0x10002
  # ping 192.0.2.2 -I eth0 -c2 -w1 -q

produces the following splat:

BUG: KASAN: slab-out-of-bounds in fq_pie_qdisc_enqueue+0x1314/0x19d0 [sch_fq_pie]
Read of size 4 at addr ffff888171306924 by task ping/942

CPU: 3 PID: 942 Comm: ping Not tainted 5.12.0+ #441
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
Call Trace:
  dump_stack+0x92/0xc1
  print_address_description.constprop.7+0x1a/0x150
  kasan_report.cold.13+0x7f/0x111
  fq_pie_qdisc_enqueue+0x1314/0x19d0 [sch_fq_pie]
  __dev_queue_xmit+0x1034/0x2b10
  ip_finish_output2+0xc62/0x2120
  __ip_finish_output+0x553/0xea0
  ip_output+0x1ca/0x4d0
  ip_send_skb+0x37/0xa0
  raw_sendmsg+0x1c4b/0x2d00
  sock_sendmsg+0xdb/0x110
  __sys_sendto+0x1d7/0x2b0
  __x64_sys_sendto+0xdd/0x1b0
  do_syscall_64+0x3c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fe69735c3eb
Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 75 42 2c 00 41 89 ca 8b 00 85 c0 75 14 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 75 c3 0f 1f 40 00 41 57 4d 89 c7 41 56 41 89
RSP: 002b:00007fff06d7fb38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055e961413700 RCX: 00007fe69735c3eb
RDX: 0000000000000040 RSI: 000055e961413700 RDI: 0000000000000003
RBP: 0000000000000040 R08: 000055e961410500 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff06d81260
R13: 00007fff06d7fb40 R14: 00007fff06d7fc30 R15: 000055e96140f0a0

Allocated by task 917:
  kasan_save_stack+0x19/0x40
  __kasan_kmalloc+0x7f/0xa0
  __kmalloc_node+0x139/0x280
  fq_pie_init+0x555/0x8e8 [sch_fq_pie]
  qdisc_create+0x407/0x11b0
  tc_modify_qdisc+0x3c2/0x17e0
  rtnetlink_rcv_msg+0x346/0x8e0
  netlink_rcv_skb+0x120/0x380
  netlink_unicast+0x439/0x630
  netlink_sendmsg+0x719/0xbf0
  sock_sendmsg+0xe2/0x110
  ____sys_sendmsg+0x5ba/0x890
  ___sys_sendmsg+0xe9/0x160
  __sys_sendmsg+0xd3/0x170
  do_syscall_64+0x3c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

The buggy address belongs to the object at ffff888171306800
  which belongs to the cache kmalloc-256 of size 256
The buggy address is located 36 bytes to the right of
  256-byte region [ffff888171306800, ffff888171306900)
The buggy address belongs to the page:
page:00000000bcfb624e refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x171306
head:00000000bcfb624e order:1 compound_mapcount:0
flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
raw: 0017ffffc0010200 dead000000000100 dead000000000122 ffff888100042b40
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff888171306800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ffff888171306880: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
>ffff888171306900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                                ^
  ffff888171306980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff888171306a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

fix fq_pie traffic path to avoid selecting 'q->flows + q->flows_cnt' as a
valid flow: it's an address beyond the allocated memory.

Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
CC: stable@vger.kernel.org
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: fq_pie: re-factor fix for fq_pie endless loop

the patch that fixed an endless loop in_fq_pie_init() was not considering
that 65535 is a valid class id. The correct bugfix for this infinite loop
is to change 'idx' to become an u32, like Colin proposed in the past [1].

Fix this as follows:
- restore 65536 as maximum possible values of 'flows_cnt'
- use u32 'idx' when iterating on 'q->flows'
- fix the TDC selftest

This reverts commit bb2f930d6dd708469a587dc9ed1efe1ef969c0bf.

[1] https://lore.kernel.org/netdev/20210407163808.499027-1-colin.king@canonical.com/

CC: Colin Ian King <colin.king@canonical.com>
CC: stable@vger.kernel.org
Fixes: bb2f930d6dd7 ("net/sched: fix infinite loop in sch_fq_pie")
Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: ensure the device is available before accessing GEMGXL control registers

If runtime power menagement is enabled, the gigabit ethernet PLL would
be disabled after macb_probe(). During this period of time, the system
would hang up if we try to access GEMGXL control registers.

We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of
sleep inside atomic section (7fa2955ff70ce453 ("sh_eth: Fix sleeping
function called from invalid context"). Add netif_running checking to
ensure the device is available before accessing GEMGXL device.

Changed in v2:
- Use netif_running instead of its own flag

Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mtk_eth_soc: Fix packet statistics support for MT7628/88

The MT7628/88 SoC(s) have other (limited) packet counter registers than
currently supported in the mtk_eth_soc driver. This patch adds support
for reading these registers, so that the packet statistics are correctly
updated.

Additionally the defines for the non-MT7628 variant packet counter
registers are added and used in this patch instead of using hard coded
values.

Signed-off-by: Stefan Roese <sr@denx.de>
Fixes: 296c9120752b ("net: ethernet: mediatek: Add MT7628/88 SoC support")
Cc: Felix Fietkau <nbd@nbd.name>
Cc: John Crispin <john@phrozen.org>
Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Reto Schneider <code@reto-schneider.ch>
Cc: Reto Schneider <reto.schneider@husqvarnagroup.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: Add entries for CBS, ETF and taprio qdiscs

Add Vinicius Costa Gomes as maintainer for these qdiscs.

These qdiscs are all TSN (Time Sensitive Networking) related.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Linux 5.13-rc3

Merge tag 'perf-urgent-2021-05-23' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:
"Two perf fixes:

   - Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as
     this can cause malfunction when TOS is not supported

   - Allocate the LBR XSAVE buffers along with the DS buffers upfront
     because allocating them when adding an event can deadlock"

* tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic context
  perf/x86: Avoid touching LBR_TOS MSR for Arch LBR

Merge tag 'locking-urgent-2021-05-23' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
"Two locking fixes:

   - Invoke the lockdep tracepoints in the correct place so the ordering
     is correct again

   - Don't leave the mutex WAITER bit stale when the last waiter is
     dropping out early due to a signal as that forces all subsequent
     lock operations needlessly into the slowpath until it's cleaned up
     again"

* tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal
  locking/lockdep: Correct calling tracepoints

Merge tag 'irq-urgent-2021-05-23' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
"A few fixes for irqchip drivers:

   - Allocate interrupt descriptors correctly on Mainstone PXA when
     SPARSE_IRQ is enabled; otherwise the interrupt association fails

   - Make the APPLE AIC chip driver depend on APPLE

   - Remove redundant error output on devm_ioremap_resource() failure"

* tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: Remove redundant error printing
  irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE
  ARM: PXA: Fix cplds irqdesc allocation when using legacy mode

Merge tag 'x86_urgent_for_v5.13_rc3' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

- Fix how SEV handles MMIO accesses by forwarding potential page faults
   instead of killing the machine and by using the accessors with the
   exact functionality needed when accessing memory.

- Fix a confusion with Clang LTO compiler switches passed to the it

- Handle the case gracefully when VMGEXIT has been executed in
   userspace

* tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev-es: Use __put_user()/__get_user() for data accesses
  x86/sev-es: Forward page-faults which happen during emulation
  x86/sev-es: Don't return NULL from sev_es_get_ghcb()
  x86/build: Fix location of '-plugin-opt=' flags
  x86/sev-es: Invalidate the GHCB after completing VMGEXIT
  x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch

Merge tag 'powerpc-5.13-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Fix breakage of strace (and other ptracers etc.) when using the new
   scv ABI (Power9 or later with glibc >= 2.33).

- Fix early_ioremap() on 64-bit, which broke booting on some machines.

Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and
Christophe Leroy.

* tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls
  powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls
  powerpc: Fix early setup to make early_ioremap() work

Merge tag 'kbuild-fixes-v5.13' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

- Fix short log indentation for tools builds

- Fix dummy-tools to adjust to the latest stackprotector check

* tag 'kbuild-fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: dummy-tools: adjust to stricter stackprotector check
  scripts/jobserver-exec: Fix a typo ("envirnoment")
  tools build: Fix quiet cmd indentation

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"10 patches.

  Subsystems affected by this patch series: mm (pagealloc, gup, kasan,
  and userfaultfd), ipc, selftests, watchdog, bitmap, procfs, and lib"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  userfaultfd: hugetlbfs: fix new flag usage in error path
  lib: kunit: suppress a compilation warning of frame size
  proc: remove Alexey from MAINTAINERS
  linux/bits.h: fix compilation error with GENMASK
  watchdog: reliable handling of timestamps
  kasan: slab: always reset the tag in get_freepointer_safe()
  tools/testing/selftests/exec: fix link error
  ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry
  Revert "mm/gup: check page posion status for coredump."
  mm/shuffle: fix section mismatch warning

userfaultfd: hugetlbfs: fix new flag usage in error path

In commit d6995da31122 ("hugetlb: use page.private for hugetlb specific
page flags") the use of PagePrivate to indicate a reservation count
should be restored at free time was changed to the hugetlb specific flag
HPageRestoreReserve.  Changes to a userfaultfd error path as well as a
VM_BUG_ON() in remove_inode_hugepages() were overlooked.

Users could see incorrect hugetlb reserve counts if they experience an
error with a UFFDIO_COPY operation.  Specifically, this would be the
result of an unlikely copy_huge_page_from_user error.  There is not an
increased chance of hitting the VM_BUG_ON.

Link: https://lkml.kernel.org/r/20210521233952.236434-1-mike.kravetz@oracle.com
Fixes: d6995da31122 ("hugetlb: use page.private for hugetlb specific page flags")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mina Almasry <almasry.mina@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: kunit: suppress a compilation warning of frame size

lib/bitfield_kunit.c: In function `test_bitfields_constants':
lib/bitfield_kunit.c:93:1: warning: the frame size of 7456 bytes is larger than 2048 bytes [-Wframe-larger-than=]
}
^

As the description of BITFIELD_KUNIT in lib/Kconfig.debug, it "Only useful
for kernel devs running the KUnit test harness, and not intended for
inclusion into a production build". Therefore, it is not worth modifying
variable 'test_bitfields_constants' to clear this warning. Just suppress
it.

Link: https://lkml.kernel.org/r/20210518094533.7652-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: remove Alexey from MAINTAINERS

People Cc me and I don't have time.

Link: https://lkml.kernel.org/r/YKarMxHJBIhMHQIh@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/bits.h: fix compilation error with GENMASK

GENMASK() has an input check which uses __builtin_choose_expr() to
enable a compile time sanity check of its inputs if they are known at
compile time.

However, it turns out that __builtin_constant_p() does not always return
a compile time constant [0]. It was thought this problem was fixed with
gcc 4.9 [1], but apparently this is not the case [2].

Switch to use __is_constexpr() instead which always returns a compile time
constant, regardless of its inputs.

Link: https://lore.kernel.org/lkml/42b4342b-aefc-a16a-0d43-9f9c0d63ba7a@rasmusvillemoes.dk
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=19449
Link: https://lore.kernel.org/lkml/1ac7bbc2-45d9-26ed-0b33-bf382b8d858b@I-love.SAKURA.ne.jp
Link: https://lkml.kernel.org/r/20210511203716.117010-1-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

watchdog: reliable handling of timestamps

Commit 9bf3bc949f8a ("watchdog: cleanup handling of false positives")
tried to handle a virtual host stopped by the host a more
straightforward and cleaner way.

But it introduced a risk of false softlockup reports.  The virtual host
might be stopped at any time, for example between
kvm_check_and_clear_guest_paused() and is_softlockup().  As a result,
is_softlockup() might read the updated jiffies and detects a softlockup.

A solution might be to put back kvm_check_and_clear_guest_paused() after
is_softlockup() and detect it.  But it would put back the cycle that
complicates the logic.

In fact, the handling of all the timestamps is not reliable.  The code
does not guarantee when and how many times the timestamps are read.  For
example, "period_ts" might be touched anytime also from NMI and re-read in
is_softlockup().  It works just by chance.

Fix all the problems by making the code even more explicit.

1. Make sure that "now" and "period_ts" timestamps are read only once.
   They might be changed at anytime by NMI or when the virtual guest is
   stopped by the host.  Note that "now" timestamp does this implicitly
   because "jiffies" is marked volatile.

2. "now" time must be read first.  The state of "period_ts" will
   decide whether it will be used or the period will get restarted.

3. kvm_check_and_clear_guest_paused() must be called before reading
   "period_ts".  It touches the variable when the guest was stopped.

As a result, "now" timestamp is used only when the watchdog was not
touched and the guest not stopped in the meantime.  "period_ts" is
restarted in all other situations.

Link: https://lkml.kernel.org/r/YKT55gw+RZfyoFf7@alley
Fixes: 9bf3bc949f8aeefeacea4b ("watchdog: cleanup handling of false positives")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: slab: always reset the tag in get_freepointer_safe()

With CONFIG_DEBUG_PAGEALLOC enabled, the kernel should also untag the
object pointer, as done in get_freepointer().

Failing to do so reportedly leads to SLUB freelist corruptions that
manifest as boot-time crashes.

Link: https://lkml.kernel.org/r/20210514072228.534418-1-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Elliot Berman <eberman@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/testing/selftests/exec: fix link error

Fix the link error by adding '-static':

  gcc -Wall  -Wl,-z,max-page-size=0x1000 -pie load_address.c -o /home/yang/linux/tools/testing/selftests/exec/load_address_4096
  /usr/bin/ld: /tmp/ccopEGun.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `stderr@@GLIBC_2.17' which may bind externally can not be used when making a shared object; recompile with -fPIC
  /usr/bin/ld: /tmp/ccopEGun.o(.text+0x158): unresolvable R_AARCH64_ADR_PREL_PG_HI21 relocation against symbol `stderr@@GLIBC_2.17'
  /usr/bin/ld: final link failed: bad value
  collect2: error: ld returned 1 exit status
  make: *** [Makefile:25: tools/testing/selftests/exec/load_address_4096] Error 1

Link: https://lkml.kernel.org/r/20210514092422.2367367-1-yangyingliang@huawei.com
Fixes: 206e22f01941 ("tools/testing/selftests: add self-test for verifying load alignment")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: Chris Kennelly <ckennelly@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry

do_mq_timedreceive calls wq_sleep with a stack local address.  The
sender (do_mq_timedsend) uses this address to later call pipelined_send.

This leads to a very hard to trigger race where a do_mq_timedreceive
call might return and leave do_mq_timedsend to rely on an invalid
address, causing the following crash:

  RIP: 0010:wake_q_add_safe+0x13/0x60
  Call Trace:
   __x64_sys_mq_timedsend+0x2a9/0x490
   do_syscall_64+0x80/0x680
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f5928e40343

The race occurs as:

1. do_mq_timedreceive calls wq_sleep with the address of `struct
   ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it
   holds a valid `struct ext_wait_queue *` as long as the stack has not
   been overwritten.

2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and
   do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call
   __pipelined_op.

3. Sender calls __pipelined_op::smp_store_release(&this->state,
   STATE_READY).  Here is where the race window begins.  (`this` is
   `ewq_addr`.)

4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it
   will see `state == STATE_READY` and break.

5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed
   to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's
   stack.  (Although the address may not get overwritten until another
   function happens to touch it, which means it can persist around for an
   indefinite time.)

6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a
   `struct ext_wait_queue *`, and uses it to find a task_struct to pass to
   the wake_q_add_safe call.  In the lucky case where nothing has
   overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct.
   In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a
   bogus address as the receiver's task_struct causing the crash.

do_mq_timedsend::__pipelined_op() should not dereference `this` after
setting STATE_READY, as the receiver counterpart is now free to return.
Change __pipelined_op to call wake_q_add_safe on the receiver's
task_struct returned by get_task_struct, instead of dereferencing `this`
which sits on the receiver's stack.

As Manfred pointed out, the race potentially also exists in
ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare.  Fix
those in the same way.

Link: https://lkml.kernel.org/r/20210510102950.12551-1-varad.gautam@suse.com
Fixes: c5b2cbdbdac563 ("ipc/mqueue.c: update/document memory barriers")
Fixes: 8116b54e7e23ef ("ipc/sem.c: document and update memory barriers")
Fixes: 0d97a82ba830d8 ("ipc/msg.c: update and document memory barriers")
Signed-off-by: Varad Gautam <varad.gautam@suse.com>
Reported-by: Matthias von Faber <matthias.vonfaber@aox-tech.de>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "mm/gup: check page posion status for coredump."

While reviewing [1] I came across commit d3378e86d182 ("mm/gup: check
page posion status for coredump.") and noticed that this patch is broken
in two ways. First it doesn't really prevent hwpoison pages from being
dumped because hwpoison pages can be marked asynchornously at any time
after the check. Secondly, and more importantly, the patch introduces a
ref count leak because get_dump_page takes a reference on the page which
is not released.

It also seems that the patch was merged incorrectly because there were
follow up changes not included as well as discussions on how to address
the underlying problem [2]

Therefore revert the original patch.

Link: http://lkml.kernel.org/r/20210429122519.15183-4-david@redhat.com
Link: http://lkml.kernel.org/r/57ac524c-b49a-99ec-c1e4-ef5027bfb61b@redhat.com
Link: https://lkml.kernel.org/r/20210505135407.31590-1-mhocko@kernel.org
Fixes: d3378e86d182 ("mm/gup: check page posion status for coredump.")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Aili Yao <yaoaili@kingsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>