Laurentiu Tudor [Wed, 14 Sep 2022 21:47:01 +0000 (16:47 -0500)]
arm64: dts: ls1043a: use a pseudo-bus to constrain usb and sata dma size
Wrap the usb and sata controllers in an intermediate simple-bus and use
it to constrain the dma address size of these usb controllers to the 40
bits that they generate toward the interconnect. This is required
because the SoC uses 48 bits address sizes and this mismatch would lead
to smmu context faults because the usb generates 40-bit addresses while
the smmu page tables are populated with 48-bit wide addresses.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Wed, 14 Sep 2022 21:47:00 +0000 (16:47 -0500)]
arm64: dts: ls1043a: add gpio based i2c recovery information
Add scl-gpios property for i2c recovery and add SoC specific compatible
string for SoC specific fixup.
Signed-off-by: Zhang Ying <ying.zhang22455@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Wed, 14 Sep 2022 21:46:59 +0000 (16:46 -0500)]
arm64: dts: ls1043a: make dma-coherent global to the SoC
ls1043a is really completely dma coherent in their entirety so add the
dma-coherent property at the soc level in the device tree and drop the
instances where it's specifically added to a few select devices.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Laurentiu Tudor [Wed, 14 Sep 2022 21:46:58 +0000 (16:46 -0500)]
arm64: dts: ls1043a: add missing dma ranges property
ls1043a has a 48-bit address size so make sure that the dma-ranges
reflects this. Otherwise the linux kernel's dma sub-system will set the
default dma masks to full 64-bit, badly breaking dmas.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Hou Zhiqiang [Wed, 14 Sep 2022 21:46:57 +0000 (16:46 -0500)]
arm64: dts: ls1043a: Add big-endian property for PCIe nodes
Add the big-endian property for LS1043A PCIe nodes for accessing PEX_LUT
and PF register block.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Hou Zhiqiang [Wed, 14 Sep 2022 21:46:56 +0000 (16:46 -0500)]
arm64: dts: ls1043a: Add SCFG phandle for PCIe nodes
The LS1043A PCIe controller has some control registers
in SCFG block, so add the SCFG phandle for each PCIe
controller node.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Wed, 14 Sep 2022 21:46:55 +0000 (16:46 -0500)]
arm64: dts: ls1043a: use pcie aer/pme interrupts
After the binding has been updated to include more specific interrupt
definition, update the dts to use the more specific interrupt names.
Signed-off-by: Po Liu <po.liu@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Wed, 14 Sep 2022 21:46:54 +0000 (16:46 -0500)]
arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
Enable USB3 HW LPM feature for ls1043a.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Wed, 14 Sep 2022 21:46:53 +0000 (16:46 -0500)]
arm64: dts: ls1043a: fix the wrong size of dcfg space
The size of the block should be 0x1000 instead of 0x10000.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pankaj Bansal [Wed, 14 Sep 2022 21:15:38 +0000 (16:15 -0500)]
arm64: dts: ls208x: remove NXP Erratum A008585 from LS2088A.
NXP Erratum A008585 affects A57 core cluster used in LS2085 rev1.
However this problem has been fixed in A72 core cluster used in LS2088.
Therefore remove the erratum from LS2088A. Keeping it only in LS2085.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Sandeep Malik <sandeep.malik@nxp.com>
Acked-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Biwen Li [Wed, 14 Sep 2022 21:15:37 +0000 (16:15 -0500)]
arm64: dts: ls208xa-rdb: fix errata E-00013
Specify a channel zero in idle state to avoid enterring tri-stated state
for PCA9547.
Some information about E-00013:
- Description: I2C1 and I2C3 buses are missing pull-up.
- Impact: When the PCA954x device is tri-stated, the I2C bus will float.
This makes the I2C bus and its associated downstream devices
inaccessible.
- Hardware fix: Populate resistors R189 and R190 for I2C1 and resistors
R228 and R229 for I2C3.
- Software fix: Remove the tri-state option from the PCA954x
driver(PCA954x always on enable status, specify a channel zero in dts to
fix the errata E-00013).
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Priyanka Jain [Wed, 14 Sep 2022 21:15:36 +0000 (16:15 -0500)]
arm64: dts: ls2081a-rdb: Add DTS for NXP LS2081ARDB
This patch adds support for NXP LS2081ARDB board which has LS2081A SoC.
LS2081A SoC is 40-pin derivative of LS2088A SoC. From functional
perspective both are same. Hence, LS2088a SoC dtsi file is included
from LS2081ARDB dts.
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
Signed-off-by: Tao Yang <b31903@freescale.com>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Ioana Radulescu [Wed, 14 Sep 2022 21:15:35 +0000 (16:15 -0500)]
arm64: dts: ls2080a-rdb: add phy nodes
Define PHY nodes on the board.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Wed, 14 Sep 2022 21:15:34 +0000 (16:15 -0500)]
arm64: dts: ls208xa-qds: add mdio mux nodes from on-board FPGA
Update the cpld node name to be generic board-contrl and add mmio mdio
mux nodes from the on-board FPGA.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Thu, 8 Sep 2022 15:49:03 +0000 (08:49 -0700)]
arm64: dts: imx8mp-venice-gw74xx: add PCIe support
Add PCIe support on the Gateworks GW74xx board. While at it,
fix the related gpio line names from the previous incorrect values.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Shenwei Wang [Wed, 14 Sep 2022 13:58:48 +0000 (08:58 -0500)]
arm64: dts: freescale: add support for i.MX8DXL EVK board
This is to support the EVK (Evaluation Kit Board) for the i.MX8DXL.
The patch has enabled the serial console, SD/EMMC interface, and
the eqos and fec ethernet network.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Shenwei Wang [Wed, 14 Sep 2022 13:58:47 +0000 (08:58 -0500)]
arm64: dts: freescale: add i.MX8DXL SoC support
i.MX8DXL is a device targeting the automotive and industrial market
segments. The chip is designed to achieve both high performance and
low power consumption. It has a dual (2x) Cortex-A35 processor.
This patch adds the basic support for i.MX8DXL SoC.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Shenwei Wang [Wed, 14 Sep 2022 13:58:46 +0000 (08:58 -0500)]
arm64: dts: imx8: add a node label to ddr-pmu
The ddr-pmu on i.mx8dxl has a different interrupt number.
Add a node label to ddr-pmu so that it could be referred
and changed in i.mx8dxl dts.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Mon, 12 Sep 2022 18:18:19 +0000 (11:18 -0700)]
arm64: dts: imx: Add i.mx8mm Gateworks gw7904 dts support
The GW7904 is based on the i.MX 8M Mini SoC featuring:
- LPDDR4 DRAM
- eMMC FLASH
- microSD connector with UHS support
- LIS2DE12 3-axis accelerometer
- Gateworks System Controller
- IMX8M FEC
- 2x RS232 off-board connectors
- PMIC
- 10x bi-color LED's
- 1x miniPCIe socket with PCIe and USB2.0
- 802.3at Class 4 PoE
- 10-30VDC input via barrel-jack
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Mon, 12 Sep 2022 18:08:36 +0000 (11:08 -0700)]
arm64: dts: imx8mp-venice-gw74xx: add WiFi/BT module support
The GW74xx supports an on-board Laird Connectivity Sterling LWB5+ module
which uses a Cypress CYW4373W chip to provide 1x1 802.11 a/b/g/n/ac +
Bluetooth 5.2.
Add the proper device-tree nodes for it.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Mon, 12 Sep 2022 18:08:35 +0000 (11:08 -0700)]
arm64: dts: imx8mp-venice-gw74xx: add cpu-supply node for cpufreq
Add regulator config for cpu-supply in order to support cpufreq.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Thu, 8 Sep 2022 15:42:27 +0000 (08:42 -0700)]
arm64: dts: imx8mp-venice-gw74xx: add USB DR support
Add support for USB DR on USB1 interface. Host/Device detection is done
using the usb-role-switch connector with a GPIO as USB1_OTG_ID is not
connected internally.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 12 Sep 2022 10:02:34 +0000 (18:02 +0800)]
arm64: dts: imx93: add mediamix blk ctrl node
Add i.MX93 mediamix blk ctrl node
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Tue, 6 Sep 2022 03:28:16 +0000 (11:28 +0800)]
arm64: dts: imx93: add src node
Add i.MX93 SRC node
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Vladimir Oltean [Mon, 5 Sep 2022 21:24:58 +0000 (00:24 +0300)]
arm64: dts: ls1028a-rdb: add more ethernet aliases
Commit "arm64: dts: ls1028a: enable swp5 and eno3 for all boards" which
Shawn declared as applied, but for which I can't find a sha1sum, has
enabled a new Ethernet port on the LS1028A-RDB (&enetc_port3), but
U-Boot, which passes a MAC address to Linux' device tree through the
/aliases node, fails to do this for this newly enabled port.
Fix that by adding more ethernet aliases in the only
backwards-compatible way possible: at the end of the current list.
And since it is possible to very easily convert either swp4 or swp5 to
DSA user ports now (which have a MAC address of their own), using these
U-Boot commands:
=> fdt addr $fdt_addr_r
=> fdt rm /soc/pcie@
1f0000000/ethernet-switch@0,5/ports/port@4 ethernet
it would be good if those DSA user ports (swp4, swp5) gained a valid MAC
address from U-Boot as well. In order for that to work properly,
provision two more ethernet aliases for &mscc_felix_port{4,5} as well.
The resulting ordering is slightly unusual, but to me looks more natural
than eno0, eno2, swp0, swp1, swp2, swp3, eno3, swp4, swp5.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Joy Zou [Mon, 5 Sep 2022 08:39:23 +0000 (16:39 +0800)]
arm64: dts: imx8mq: update sdma node name format
Node names should be generic, so change the sdma node name format 'sdma'
into 'dma-controller'.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 5 Sep 2022 05:59:15 +0000 (13:59 +0800)]
arm64: dts: imx93: add lpspi nodes
Add i.MX93 lpspi nodes
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 5 Sep 2022 05:59:14 +0000 (13:59 +0800)]
arm64: dts: imx93: add lpi2c nodes
Add i.MX93 lpi2c nodes
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 5 Sep 2022 05:59:13 +0000 (13:59 +0800)]
arm64: dts: imx93: add a55 pmu
Add A55 PMU node for perf usage
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 5 Sep 2022 05:59:12 +0000 (13:59 +0800)]
arm64: dts: imx93: add blk ctrl node
Add i.MX93 BLK CTRL MIX node
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 5 Sep 2022 05:59:11 +0000 (13:59 +0800)]
arm64: dts: imx93: add s4 mu node
Add s4 mu node for sentinel communication
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 5 Sep 2022 05:59:10 +0000 (13:59 +0800)]
arm64: dts: imx93: add gpio clk
Add the GPIO clk, otherwise GPIO may not work if clk driver disable the
GPIO clk during kernel boot.
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 5 Sep 2022 05:59:09 +0000 (13:59 +0800)]
arm64: dts: imx93: correct SDHC clk entry
DUMMY clk only works with clk_ignore_unused and bootloader enables those
clks that required for SDHC work properly.
Correct SDHC clk entry with real clk.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alexander Stein [Mon, 5 Sep 2022 07:37:30 +0000 (09:37 +0200)]
arm64: dts: tqma8mpql: add USB DR support
Add support for USB DR on USB1 interface. Host/Device detection is done
using the usb-role-switch connector.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Philippe Schenker [Thu, 1 Sep 2022 10:01:50 +0000 (12:01 +0200)]
arm64: dts: verdin-imx8mm: introduce hdmi-connector
The Lontium LT8912B driver needs a HDMI connector to be connected to
port 1. Introduce this connector to be enabled in a device tree overlay.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marcel Ziswiler [Thu, 1 Sep 2022 10:01:49 +0000 (12:01 +0200)]
arm64: dts: verdin-imx8mm: add lvds panel node
Add an LVDS panel node to be extended by a device tree overlay.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marcel Ziswiler [Thu, 1 Sep 2022 10:01:48 +0000 (12:01 +0200)]
arm64: dts: verdin-imx8mm: rename sn65dsi83 to sn65dsi84
Rename sn65dsi83 to sn65dsi84 as that is the exact chip used on the
Verdin DSI to LVDS Adapter.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Clark Wang [Wed, 31 Aug 2022 14:25:52 +0000 (22:25 +0800)]
arm64: dts: imx8ulp: increase the clock speed of LPSPI
LPSPI transfer max speed is half of the root clock.
Increase the root clock speed to support faster data transmission.
And update the parent clock of all i2c/spi with IMX8ULP_CLK_FROSC_DIV2
which could produce accurate clock for i2c/spi usage.
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Wed, 31 Aug 2022 14:25:51 +0000 (22:25 +0800)]
arm64: dts: imx8ulp: add mailbox node
Add Sentinel Message Unit(MU), Generic MU nodes.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Wed, 31 Aug 2022 14:25:50 +0000 (22:25 +0800)]
arm64: dts: imx8ulp: add pmu node
Add i.MX8ULP pmu node
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Wed, 31 Aug 2022 14:25:48 +0000 (22:25 +0800)]
arm64: dts: imx8ulp: correct the scmi sram node name
Follow sram/sram.yaml to update the sram node name.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Wed, 31 Aug 2022 14:25:47 +0000 (22:25 +0800)]
arm64: dts: imx8ulp: drop undocumented property in cgc
The clocks and clocks-names are not documented in binding doc,
and the clk-imx8ulp driver not use the undocumented property,
so drop them.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Martin Kepplinger [Fri, 2 Sep 2022 08:42:16 +0000 (10:42 +0200)]
arm64: dts: imx8mq-librem5: fix mipi_csi description
Properties are not documented so lead to the following error:
'#address-cells', '#size-cells', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+'
Fix this by removing unneeded properties.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Angus Ainslie [Fri, 2 Sep 2022 08:42:15 +0000 (10:42 +0200)]
arm64: dts: imx8mq-librem5: add usb-role-switch property to dwc3
In order to enable (PD and data) role switching on the Librem 5 phone,
add the usb-role-switch property to imx8mq's dwc3 node.
Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Angus Ainslie [Fri, 2 Sep 2022 08:42:14 +0000 (10:42 +0200)]
arm64: dts: imx8mq-librem5: add USB type-c properties for role switching
Add the connector properties to the USB type-c stanza to enable (PD)
role-switching on the Librem 5 phone.
Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Sebastian Krzyszkowiak [Fri, 2 Sep 2022 08:42:13 +0000 (10:42 +0200)]
arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supply
This allows the userspace to notice that there's not enough
current provided to charge the battery, and also fixes issues
with 0% SOC values being considered invalid.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Guido Günther [Fri, 2 Sep 2022 08:42:12 +0000 (10:42 +0200)]
arm64: dts: imx8mq-librem5: add RGB pwm notification leds
Describe the RGB notification leds on the Librem 5 phone.
Use the common defines so we're sure to adhere to the common patterns,
use predefined led colors and functions so we're being warned in case
of deprecations.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Martin Kepplinger [Fri, 2 Sep 2022 08:42:11 +0000 (10:42 +0200)]
arm64: dts: imx8mq-librem5: describe the voice coil motor for focus control
Describe the focus motor that will be used for the rear camera - even
though the rear camera sensor driver is not yet in the mainline. The
focus motor is a separate device and can be controlled already.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Vladimir Oltean [Wed, 31 Aug 2022 16:01:24 +0000 (19:01 +0300)]
arm64: dts: ls1028a: enable swp5 and eno3 for all boards
In order for the LS1028A based boards to benefit from support for
multiple CPU ports, the second DSA master and its associated CPU port
must be enabled in the device trees. This does not change the default
CPU port from the current port 4.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Vladimir Oltean [Wed, 31 Aug 2022 16:01:23 +0000 (19:01 +0300)]
arm64: dts: ls1028a: mark enetc port 3 as a DSA master too
The LS1028A switch has 2 internal links to the ENETC controller.
With DSA's ability to support multiple CPU ports, we should mark both
ENETC ports as DSA masters.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Vladimir Oltean [Wed, 31 Aug 2022 16:01:22 +0000 (19:01 +0300)]
arm64: dts: ls1028a: move DSA CPU port property to the common SoC dtsi
Since the CPU port 4 of the switch is hardwired inside the SoC to go to
the enetc port 2, this shouldn't be something that the board files need
to set (but whether that CPU port is used or not is another discussion).
So move the DSA "ethernet" property to the common dtsi.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Richard Zhu [Fri, 2 Sep 2022 08:58:02 +0000 (16:58 +0800)]
arm64: dts: imx8mp-evk: Add PCIe support
Add PCIe support on i.MX8MP EVK board.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Richard Zhu [Fri, 2 Sep 2022 08:58:01 +0000 (16:58 +0800)]
arm64: dts: imx8mp: Add iMX8MP PCIe support
Add i.MX8MP PCIe support.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marcel Ziswiler [Fri, 26 Aug 2022 19:22:50 +0000 (21:22 +0200)]
arm64: dts: imx8ulp: no executable source file permission
This fixes the following error:
arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h: error: do not set
execute permissions for source files
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marek Vasut [Tue, 23 Aug 2022 16:56:02 +0000 (18:56 +0200)]
arm64: dts: imx8mp: Add SNVS LPGPR
Add SNVS LPGPR bindings to MX8M Plus, the LPGPR is used to store
e.g. boot counter.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Martyn Welch [Tue, 23 Aug 2022 14:01:22 +0000 (15:01 +0100)]
arm64: dts: imx8mp-msc-sm2s: Add device trees for MSC SM2S-IMX8PLUS SoM and carrier board
Add device trees for one of a number of MSC's (parent company, Avnet)
variants of the SM2S-IMX8PLUS system on module along with the compatible
SM2S-SK-AL-EP1 carrier board. As the name suggests, this family of SoMs use
the NXP i.MX8MP SoC and provide the SMARC module interface.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Jagan Teki [Tue, 23 Aug 2022 12:53:25 +0000 (18:23 +0530)]
arm64: dts: imx8mm: Fix typo in license text for Engicam boards
Fix the Amarula Solutions typo mistake in license text for Engicam
i.MX8M boards add in below commits.
commit <
60ac35268f85b> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M
Mini SoM")
commit <
aec8ad34f7f24> ("arm64: dts: imx8mp: Add Engicam i.Core MX8M
Plus EDIMM2.2 Starter Kit")
commit <
eefe06b295087> ("arm64: dts: imx8mp: Add Engicam i.Core MX8M
Plus SoM")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Tue, 23 Aug 2022 03:02:13 +0000 (11:02 +0800)]
arm64: dts: imx8-ss-dma: add IPG clock for i2c
i.MX8 LPI2C requires both PER and IPG clock, so add the missed IPG clk.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frieder Schrempf [Mon, 22 Aug 2022 08:03:54 +0000 (10:03 +0200)]
arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S
This adds support for the Kontron Electronics SL i.MX8MM OSM-S SoM
and the matching baseboard BL i.MX8MM OSM-S.
The SoM hardware complies to the Open Standard Module (OSM) 1.0
specification, size S (https://sget.org/standards/osm).
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frieder Schrempf [Mon, 22 Aug 2022 08:03:53 +0000 (10:03 +0200)]
arm64: dts: imx8mm-kontron: Add SPI NOR partition layout
This is the layout used by the bootloader. Add it to the kernel
devicetree to make the same layout available in Linux and have
the devicetrees synced.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frieder Schrempf [Mon, 22 Aug 2022 08:03:52 +0000 (10:03 +0200)]
arm64: dts: imx8mm-kontron: Use voltage rail names from schematic for PMIC regulator-names
Improve the naming of the regulators to contain the voltage rail
names from the schematic.
Suggested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frieder Schrempf [Mon, 22 Aug 2022 08:03:51 +0000 (10:03 +0200)]
arm64: dts: imx8mm-kontron: Remove low DDRC operating point
For some reason there is a problem with finding a DDR configuration
that works on all operating points and all LPDDR4 types used on the
SoM. Therefore the bootloader currently doesn't configure the lowest
of the three operating points. Let's also skip this in the kernel
devicetree to make sure it isn't used.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frieder Schrempf [Mon, 22 Aug 2022 08:03:50 +0000 (10:03 +0200)]
arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card IO voltage
It turns out that it is not necessary to declare the VSELECT signal as
GPIO and let the PMIC driver set it to a fixed high level. This switches
the voltage between 3.3V and 1.8V by setting the PMIC register for LDO5
accordingly.
Instead we can do it like other boards already do and simply mux the
VSELECT signal of the USDHC interface to the pin. This makes sure that
the correct voltage is selected by setting the PMIC's SD_VSEL input
to high or low accordingly.
Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frieder Schrempf [Mon, 22 Aug 2022 08:03:49 +0000 (10:03 +0200)]
arm64: dts: imx8mm-kontron: Adjust compatibles, file names and model strings
The official naming includes "SL" (SoM-Line) or "BL" (Board-Line).
By updating we make sure, that we can maintain this more easily in
future and make sure that the proper devicetree can be selected for
the hardware.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 22 Aug 2022 06:45:36 +0000 (14:45 +0800)]
arm64: dts: imx8mp: add VPU blk ctrl node
Add i.MX8MP VPU blk ctrl node
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 22 Aug 2022 06:45:35 +0000 (14:45 +0800)]
arm64: dts: imx8mp: add vpu pgc nodes
Add i.MX8MP PGC nodes for vpu, which are used to supply power for VPU.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Max Krummenacher [Mon, 22 Aug 2022 07:53:42 +0000 (09:53 +0200)]
arm64: dts: imx8mp-verdin: add cpu-supply
Add the cpu-supply property to all CPU nodes to enable the cpufreq
driver.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Fri, 12 Aug 2022 17:23:34 +0000 (10:23 -0700)]
arm64: dts: imx8mm-venice-gw7903: add digital I/O ctl gpios
The GW7903-C revision introduced two additional GPIO's for controlling
the digital I/O direction. Add them.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 4 Aug 2022 17:59:43 +0000 (14:59 -0300)]
arm64: dts: imx8mm/n-venice-gw7902: Remove invalid property
The 'oscillator-frequency' property is not documented and it is
not used anywhere. Remove it.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marek Vasut [Sun, 24 Jul 2022 20:47:41 +0000 (22:47 +0200)]
arm64: dts: imx8mp: Add SoM compatible to i.MX8M Plus DHCOM PDK2
Add SoM compatible string into i.MX8MP DHCOM PDK2 compatible strings.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marek Vasut [Sun, 24 Jul 2022 20:47:01 +0000 (22:47 +0200)]
arm64: dts: imx8mp: Drop Atheros PHY header from i.MX8M Plus DHCOM PDK2
This PHY is not used on PDK2, the header was added due to copy-paste
error, drop it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marek Vasut [Sun, 24 Jul 2022 20:46:36 +0000 (22:46 +0200)]
arm64: dts: imx8mp: Add HW variant details to i.MX8M Plus DHCOM PDK2
Add information about which exact SoM variant is used on which PDK2 variant.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marcel Ziswiler [Fri, 22 Jul 2022 21:54:44 +0000 (23:54 +0200)]
arm64: dts: mnt-reform2: don't use multiple blank lines
Avoid the following checkpatch warning:
arch/arm/boot/dts/imx8mq-mnt-reform2.dts:213: check: Please don't use
multiple blank lines
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marcel Ziswiler [Fri, 22 Jul 2022 21:54:43 +0000 (23:54 +0200)]
arm64: dts: imx8mp-verdin: don't use multiple blank lines
Avoid the following checkpatch warning:
arch/arm/boot/dts/imx8mp-verdin.dtsi:281: check: Please don't use
multiple blank lines
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marcel Ziswiler [Fri, 22 Jul 2022 21:54:42 +0000 (23:54 +0200)]
arm64: dts: imx8mm-venice-gw72xx-0x: blank line at end of file
Avoid the following checkpatch warning:
Found possible blank line(s) at end of file
'arch/arm/boot/dts/imx8mm-venice-gw72xx-0x.dts'
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Wei Fang [Tue, 26 Jul 2022 14:38:53 +0000 (00:38 +1000)]
arm64: dts: imx8ulp-evk: Add the fec support
Enable the fec on i.MX8ULP EVK board.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Wei Fang [Tue, 26 Jul 2022 14:38:52 +0000 (00:38 +1000)]
arm64: dts: imx8ulp: Add the fec support
Add the fec support on i.MX8ULP platforms.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Fri, 8 Jul 2022 08:56:32 +0000 (16:56 +0800)]
arm64: dts: imx8mp: add interconnect for hsio blk ctrl
Add interconnect property for hsio blk ctrl
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Fri, 8 Jul 2022 08:56:31 +0000 (16:56 +0800)]
arm64: dts: imx8mp: add interconnects for media blk ctrl
Add interconnect property for media blk ctrl
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Shenwei Wang [Wed, 14 Sep 2022 13:58:45 +0000 (08:58 -0500)]
dt-bindings: arm: imx: update fsl.yaml for imx8dxl
i.MX8DXL is a device targeting the automotive and industrial market
segments. The chip is designed to achieve both high performance and
low power consumption. It has a dual (2x) Cortex-A35 processor.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Shenwei Wang [Wed, 14 Sep 2022 13:58:44 +0000 (08:58 -0500)]
dt-bindings: firmware: add missing resource IDs for imx8dxl
Add the missing resource IDs for imx8dxl.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Mon, 12 Sep 2022 18:18:18 +0000 (11:18 -0700)]
dt-bindings: arm: Add i.MX8M Mini Gateworks GW7904 board
Add DT compatible string for i.MX8M Mini based Gateworks GW7904 board.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Tue, 6 Sep 2022 03:28:13 +0000 (11:28 +0800)]
dt-bindings: soc: add i.MX93 mediamix blk ctrl
Add DT bindings for i.MX93 MEDIAMIX BLK CTRL.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Tue, 6 Sep 2022 03:28:12 +0000 (11:28 +0800)]
dt-bindings: soc: add i.MX93 SRC
Add bindings for i.MX93 System Reset Controller(SRC). SRC supports
resets and power gating for mixes.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 5 Sep 2022 05:59:08 +0000 (13:59 +0800)]
dt-bindings: mfd: syscon: Add i.MX93 blk ctrl system registers
Document i.MX93 BLK CTRL system registers.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Martyn Welch [Tue, 23 Aug 2022 14:01:21 +0000 (15:01 +0100)]
dt-bindings: arm: fsl: Add MSC SM2S-IMX8PLUS SoM and SM2-MB-EP1 Carrier
Add DT compatible strings for a combination of the 14N0600E variant of
the Avnet (MSC branded) SM2S-IMX8PLUS SoM on it's own and in combination
with the SM2-MB-EP1 carrier board.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frieder Schrempf [Mon, 22 Aug 2022 08:03:48 +0000 (10:03 +0200)]
dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board
Add bindings for the Kontron BL i.MX8MM OSM-S board.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frieder Schrempf [Mon, 22 Aug 2022 08:03:47 +0000 (10:03 +0200)]
dt-bindings: arm: fsl: Rename compatibles for Kontron i.MX8MM SoM/board
This updates the bindings in order to use names for the boards that
follow the latest convention used by Kontron marketing.
By updating we make sure, that we can maintain this more easily in
future and make sure that the proper devicetree can be selected for
the hardware.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 22 Aug 2022 06:45:32 +0000 (14:45 +0800)]
dt-bindings: soc: imx: add i.MX8MP vpu blk ctrl
i.MX8MP VPU blk ctrl module has similar design as i.MX8MM, so reuse
the i.MX8MM VPU blk ctrl yaml file. And add description for the items.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 22 Aug 2022 06:45:31 +0000 (14:45 +0800)]
dt-bindings: soc: imx: add interconnect property for i.MX8MM vpu blk ctrl
i.MX8MM VPU support NoC QoS setting, so add interconnect property
for i.MX8MM VPU blk ctrl
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 22 Aug 2022 06:45:30 +0000 (14:45 +0800)]
dt-bindings: soc: imx: drop minItems for i.MX8MM vpu blk ctrl
minItems and maxItems are set as the same value. In such case minItems is
not necessary. So drop it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 22 Aug 2022 06:45:29 +0000 (14:45 +0800)]
dt-bindings: power: imx8mp-power: add HDMI HDCP/HRV
Add i.MX8MP HDMI HDCP and HRV entries.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frieder Schrempf [Mon, 15 Aug 2022 08:28:10 +0000 (10:28 +0200)]
dt-bindings: arm: fsl: imx6ul-kontron: Update bindings
This updates the bindings in order to simplify the devicetree
structure and to add names for the boards that follow the latest
convention used by Kontron marketing.
It also gets rid of the N6xxx notation in the compatibles and
file names, as they are not really used anymore and often result
in confusion.
This is a breaking change, but the impact shouldn't be too big
and it makes usage and maintenance easier in the future.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marcel Ziswiler [Fri, 22 Jul 2022 21:54:45 +0000 (23:54 +0200)]
dt-bindings: clk: imx8mm: don't use multiple blank lines
Avoid the following checkpatch warning:
include/dt-bindings/clock/imx8mm-clock.h:284: check: Please don't use
multiple blank lines
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Fri, 8 Jul 2022 08:56:28 +0000 (16:56 +0800)]
dt-bindings: soc: imx: add interconnect property for i.MX8MP hsio blk ctrl
Add interconnect property for i.MX8MP hsio blk ctrl
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Fri, 8 Jul 2022 08:56:27 +0000 (16:56 +0800)]
dt-bindings: soc: imx: add interconnect property for i.MX8MP hdmi blk ctrl
Add interconnect property for i.MX8MP hdmi blk ctrl
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Fri, 8 Jul 2022 08:56:26 +0000 (16:56 +0800)]
dt-bindings: soc: imx: add interconnect property for i.MX8MP media blk ctrl
Add interconnect property for i.MX8MP mediamix blk ctrl
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Linus Torvalds [Sun, 14 Aug 2022 22:50:18 +0000 (15:50 -0700)]
Linux 6.0-rc1
Yury Norov [Fri, 12 Aug 2022 05:34:25 +0000 (22:34 -0700)]
radix-tree: replace gfp.h inclusion with gfp_types.h
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.
Fixes powerpc allmodconfig build:
In file included from include/linux/nodemask.h:97,
from include/linux/mmzone.h:17,
from include/linux/gfp.h:7,
from include/linux/radix-tree.h:12,
from include/linux/idr.h:15,
from include/linux/kernfs.h:12,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/pci.h:35,
from arch/powerpc/kernel/prom_init.c:24:
include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
| ^~~~~~~~~~~~~~
| add_latent_entropy
include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com>
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 14 Aug 2022 20:03:53 +0000 (13:03 -0700)]
Merge tag 'pull-fixes' of git://git./linux/kernel/git/viro/vfs
Pull vfs lseek fix from Al Viro:
"Fix proc_reg_llseek() breakage. Always had been possible if somebody
left NULL ->proc_lseek, became a practical issue now"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
take care to handle NULL ->proc_lseek()