netfilter: nf_flow_table: set default timeout after successful insertion

commit 110e48725db6262f260f10727d0fb2d3d25895e4 upstream.

Set up the default timeout for this new entry otherwise the garbage
collector might quickly remove it right after the flowtable insertion.

Fixes: ac2a66665e23 ("netfilter: add generic flow table infrastructure")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.74

x86/build: Add -Wnoaddress-of-packed-member to REALMODE_CFLAGS, to silence GCC9 build warning

commit 42e0e95474fc6076b5cd68cab8fa0340a1797a72 upstream.

One of the very few warnings I have in the current build comes from
arch/x86/boot/edd.c, where I get the following with a gcc9 build:

   arch/x86/boot/edd.c: In function ‘query_edd’:
   arch/x86/boot/edd.c:148:11: warning: taking address of packed member of ‘struct boot_params’ may result in an unaligned pointer value [-Waddress-of-packed-member]
     148 |  mbrptr = boot_params.edd_mbr_sig_buffer;
         |           ^~~~~~~~~~~

This warning triggers because we throw away all the CFLAGS and then make
a new set for REALMODE_CFLAGS, so the -Wno-address-of-packed-member we
added in the following commit is not present:

  6f303d60534c ("gcc-9: silence 'address-of-packed-member' warning")

The simplest solution for now is to adjust the warning for this version
of CFLAGS as well, but it would definitely make sense to examine whether
REALMODE_CFLAGS could be derived from CFLAGS, so that it picks up changes
in the compiler flags environment automatically.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: Use the same permissions for eeprom as for nvmem

commit e70d8b287301eb6d7c7761c6171c56af62110ea3 upstream.

The compatibility "eeprom" attribute is currently root-only no
matter what the configuration says. The "nvmem" attribute does
respect the setting of the root_only configuration bit, so do the
same for "eeprom".

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: b6c217ab9be6 ("nvmem: Add backwards compatibility support for older EEPROM drivers.")
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190728184255.563332e6@endymion
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: fix a double free bug in rsi_91x_deinit()

commit 8b51dc7291473093c821195c4b6af85fadedbc2f upstream.

`dev` (struct rsi_91x_usbdev *) field of adapter
(struct rsi_91x_usbdev *) is allocated  and initialized in
`rsi_init_usb_interface`. If any error is detected in information
read from the device side,  `rsi_init_usb_interface` will be
freed. However, in the higher level error handling code in
`rsi_probe`, if error is detected, `rsi_91x_deinit` is called
again, in which `dev` will be freed again, resulting double free.

This patch fixes the double free by removing the free operation on
`dev` in `rsi_init_usb_interface`, because `rsi_91x_deinit` is also
used in `rsi_disconnect`, in that code path, the `dev` field is not
 (and thus needs to be) freed.

This bug was found in v4.19, but is also present in the latest version
of kernel. Fixes CVE-2019-15504.

Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: Hui Peng <benquike@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: pmc_atom: Add CB4063 Beckhoff Automation board to critclk_systems DMI table

commit 9452fbf5c6cf5f470e0748fe7a14a683e7765f7a upstream.

The CB4063 board uses pmc_plt_clk* clocks for ethernet controllers. This
adds it to the critclk_systems DMI table so the clocks are marked as
CLK_CRITICAL and not turned off.

Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

modules: fix compile error if don't have strict module rwx

commit 93651f80dcb616b8c9115cdafc8e57a781af22d0 upstream.

If CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not defined,
we need stub for module_enable_nx() and module_enable_x().

If CONFIG_ARCH_HAS_STRICT_MODULE_RWX is defined, but
CONFIG_STRICT_MODULE_RWX is disabled, we need stub for
module_enable_nx.

Move frob_text() outside of the CONFIG_STRICT_MODULE_RWX,
because it is needed anyway.

Fixes: 2eef1399a866 ("modules: fix BUG when load module with rodata=n")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

modules: fix BUG when load module with rodata=n

commit 2eef1399a866c57687962e15142b141a4f8e7862 upstream.

When loading a module with rodata=n, it causes an executing
NX-protected page BUG.

[   32.379191] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[   32.382917] BUG: unable to handle page fault for address: ffffffffc0005000
[   32.385947] #PF: supervisor instruction fetch in kernel mode
[   32.387662] #PF: error_code(0x0011) - permissions violation
[   32.389352] PGD 240c067 P4D 240c067 PUD 240e067 PMD 421a52067 PTE 8000000421a53063
[   32.391396] Oops: 0011 [#1] SMP PTI
[   32.392478] CPU: 7 PID: 2697 Comm: insmod Tainted: G           O      5.2.0-rc5+ #202
[   32.394588] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[   32.398157] RIP: 0010:ko_test_init+0x0/0x1000 [ko_test]
[   32.399662] Code: Bad RIP value.
[   32.400621] RSP: 0018:ffffc900029f3ca8 EFLAGS: 00010246
[   32.402171] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   32.404332] RDX: 00000000000004c7 RSI: 0000000000000cc0 RDI: ffffffffc0005000
[   32.406347] RBP: ffffffffc0005000 R08: ffff88842fbebc40 R09: ffffffff810ede4a
[   32.408392] R10: ffffea00108e3480 R11: 0000000000000000 R12: ffff88842bee21a0
[   32.410472] R13: 0000000000000001 R14: 0000000000000001 R15: ffffc900029f3e78
[   32.412609] FS:  00007fb4f0c0a700(0000) GS:ffff88842fbc0000(0000) knlGS:0000000000000000
[   32.414722] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   32.416290] CR2: ffffffffc0004fd6 CR3: 0000000421a90004 CR4: 0000000000020ee0
[   32.418471] Call Trace:
[   32.419136]  do_one_initcall+0x41/0x1df
[   32.420199]  ? _cond_resched+0x10/0x40
[   32.421433]  ? kmem_cache_alloc_trace+0x36/0x160
[   32.422827]  do_init_module+0x56/0x1f7
[   32.423946]  load_module+0x1e67/0x2580
[   32.424947]  ? __alloc_pages_nodemask+0x150/0x2c0
[   32.426413]  ? map_vm_area+0x2d/0x40
[   32.427530]  ? __vmalloc_node_range+0x1ef/0x260
[   32.428850]  ? __do_sys_init_module+0x135/0x170
[   32.430060]  ? _cond_resched+0x10/0x40
[   32.431249]  __do_sys_init_module+0x135/0x170
[   32.432547]  do_syscall_64+0x43/0x120
[   32.433853]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Because if rodata=n, set_memory_x() can't be called, fix this by
calling set_memory_x in complete_formation();

Fixes: f2c65fb3221a ("x86/modules: Avoid breaking W^X while loading modules")
Suggested-by: Jian Cheng <cj.chengjian@huawei.com>
Reviewed-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: stm32-dfsdm: fix data type

commit c6013bf50e2a2a94ab3d012e191096432aa50c6f upstream.

Fix the data type as DFSDM raw output is complements 2,
24bits left aligned in a 32-bit register.
This change does not affect AUDIO path
- Set data as signed for IIO (as for AUDIO)
- Set 8 bit right shift for IIO.
The 8 LSBs bits of data contains channel info and are masked.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support")
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"

commit 1ffdb51f28e8ec6be0a2b812c1765b5cf5c44a8f upstream.

This reverts commit a0085f2510e8976614ad8f766b209448b385492f.

This commit has caused regressions in notebooks that support suspend
to idle such as the XPS 9360, XPS 9370 and XPS 9380.

These notebooks will wakeup from suspend to idle from an unsolicited
advertising packet from an unpaired BLE device.

In a bug report it was sugggested that this is caused by a generic
lack of LE privacy support.  Revert this commit until that behavior
can be avoided by the kernel.

Fixes: a0085f2510e8 ("Bluetooth: btusb: driver to enable the usb-wakeup feature")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=200039
Link: https://marc.info/?l=linux-bluetooth&m=156441081612627&w=2
Link: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/750073/
CC: Bastien Nocera <hadess@hadess.net>
CC: Christian Kellner <ckellner@redhat.com>
CC: Sukumar Ghorai <sukumar.ghorai@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mediatek: mtk_drm_drv.c: Add of_node_put() before goto

commit 165d42c012be69900f0e2f8545626cb9e7d4a832 upstream.

Each iteration of for_each_child_of_node puts the previous
node, but in the case of a goto from the middle of the loop, there is
no put, thus causing a memory leak. Hence add an of_node_put before the
goto in two places.
Issue found with Coccinelle.

Fixes: 119f5173628a (drm/mediatek: Add DRM Driver for Mediatek SoC MT8173)

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: panel-orientation-quirks: Add extra quirk table entry for GPD MicroPC

commit dae1ccee012ea7514af8e4a88429844157aca7dc upstream.

Newer GPD MicroPC BIOS versions have proper DMI strings, add an extra quirk
table entry for these new strings. This is good news, as this means that we
no longer have to update the BIOS dates list with every BIOS update.

Fixes: 652b8b086538("drm: panel-orientation-quirks: Add quirk for GPD MicroPC")
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190624154014.8557-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: ti_sci: Always request response from firmware

commit 66f030eac257a572fbedab3d9646d87d647351fd upstream.

TI-SCI firmware will only respond to messages when the
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED flag is set. Most messages already do
this, set this for the ones that do not.

This will be enforced in future firmware that better match the TI-SCI
specifications, this patch will not break users of existing firmware.

Fixes: aa276781a64a ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol")
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Tested-by: Alejandro Hernandez <ajhernandez@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: talitos - HMAC SNOOP NO AFEU mode requires SW icv checking.

commit 4bbfb839259a9c96a0be872e16f7471b7136aee5 upstream.

In that mode, hardware ICV verification is not supported.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 7405c8d7ff97 ("crypto: talitos - templates for AEAD using HMAC_SNOOP_NO_AFEU")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: talitos - Do not modify req->cryptlen on decryption.

commit 7ede4c36cf7c6516986ee9d75b197c8bf73ea96f upstream.

For decrypt, req->cryptlen includes the size of the authentication
part while all functions of the driver expect cryptlen to be
the size of the encrypted data.

As it is not expected to change req->cryptlen, this patch
implements local calculation of cryptlen.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 9c4a79653b35 ("crypto: talitos - Freescale integrated security engine (SEC) driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: talitos - fix ECB algs ivsize

commit d84cc9c9524ec5973a337533e6d8ccd3e5f05f2b upstream.

ECB's ivsize must be 0.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 5e75ae1b3cef ("crypto: talitos - add new crypto modes")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: talitos - check data blocksize in ablkcipher.

commit ee483d32ee1a1a7f7d7e918fbc350c790a5af64a upstream.

When data size is not a multiple of the alg's block size,
the SEC generates an error interrupt and dumps the registers.
And for NULL size, the SEC does just nothing and the interrupt
is awaited forever.

This patch ensures the data size is correct before submitting
the request to the SEC engine.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 4de9d0b547b9 ("crypto: talitos - Add ablkcipher algorithms")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: talitos - fix CTR alg blocksize

commit b9a05b6041cb9810a291315569b2af0d63c3680a upstream.

CTR has a blocksize of 1.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 5e75ae1b3cef ("crypto: talitos - add new crypto modes")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: talitos - check AES key size

commit 1ba34e71e9e56ac29a52e0d42b6290f3dc5bfd90 upstream.

Although the HW accepts any size and silently truncates
it to the correct length, the extra tests expects EINVAL
to be returned when the key size is not valid.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 4de9d0b547b9 ("crypto: talitos - Add ablkcipher algorithms")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Fix use-after-free and double free on glue directory

commit ac43432cb1f5c2950408534987e57c2071e24d8f upstream.

There is a race condition between removing glue directory and adding a new
device under the glue dir. It can be reproduced in following test:

CPU1:                                         CPU2:

device_add()
  get_device_parent()
    class_dir_create_and_add()
      kobject_add_internal()
        create_dir()    // create glue_dir

                                              device_add()
                                                get_device_parent()
                                                  kobject_get() // get glue_dir

device_del()
  cleanup_glue_dir()
    kobject_del(glue_dir)

                                                kobject_add()
                                                  kobject_add_internal()
                                                    create_dir() // in glue_dir
                                                      sysfs_create_dir_ns()
                                                        kernfs_create_dir_ns(sd)

      sysfs_remove_dir() // glue_dir->sd=NULL
      sysfs_put()        // free glue_dir->sd

                                                          // sd is freed
                                                          kernfs_new_node(sd)
                                                            kernfs_get(glue_dir)
                                                            kernfs_add_one()
                                                            kernfs_put()

Before CPU1 remove last child device under glue dir, if CPU2 add a new
device under glue dir, the glue_dir kobject reference count will be
increase to 2 via kobject_get() in get_device_parent(). And CPU2 has
been called kernfs_create_dir_ns(), but not call kernfs_new_node().
Meanwhile, CPU1 call sysfs_remove_dir() and sysfs_put(). This result in
glue_dir->sd is freed and it's reference count will be 0. Then CPU2 call
kernfs_get(glue_dir) will trigger a warning in kernfs_get() and increase
it's reference count to 1. Because glue_dir->sd is freed by CPU1, the next
call kernfs_add_one() by CPU2 will fail(This is also use-after-free)
and call kernfs_put() to decrease reference count. Because the reference
count is decremented to 0, it will also call kmem_cache_free() to free
the glue_dir->sd again. This will result in double free.

In order to avoid this happening, we also should make sure that kernfs_node
for glue_dir is released in CPU1 only when refcount for glue_dir kobj is
1 to fix this race.

The following calltrace is captured in kernel 4.14 with the following patch
applied:

commit 726e41097920 ("drivers: core: Remove glue dirs from sysfs earlier")

--------------------------------------------------------------------------
[    3.633703] WARNING: CPU: 4 PID: 513 at .../fs/kernfs/dir.c:494
                Here is WARN_ON(!atomic_read(&kn->count) in kernfs_get().
....
[    3.633986] Call trace:
[    3.633991]  kernfs_create_dir_ns+0xa8/0xb0
[    3.633994]  sysfs_create_dir_ns+0x54/0xe8
[    3.634001]  kobject_add_internal+0x22c/0x3f0
[    3.634005]  kobject_add+0xe4/0x118
[    3.634011]  device_add+0x200/0x870
[    3.634017]  _request_firmware+0x958/0xc38
[    3.634020]  request_firmware_into_buf+0x4c/0x70
....
[    3.634064] kernel BUG at .../mm/slub.c:294!
                Here is BUG_ON(object == fp) in set_freepointer().
....
[    3.634346] Call trace:
[    3.634351]  kmem_cache_free+0x504/0x6b8
[    3.634355]  kernfs_put+0x14c/0x1d8
[    3.634359]  kernfs_create_dir_ns+0x88/0xb0
[    3.634362]  sysfs_create_dir_ns+0x54/0xe8
[    3.634366]  kobject_add_internal+0x22c/0x3f0
[    3.634370]  kobject_add+0xe4/0x118
[    3.634374]  device_add+0x200/0x870
[    3.634378]  _request_firmware+0x958/0xc38
[    3.634381]  request_firmware_into_buf+0x4c/0x70
--------------------------------------------------------------------------

Fixes: 726e41097920 ("drivers: core: Remove glue dirs from sysfs earlier")
Signed-off-by: Muchun Song <smuchun@gmail.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Link: https://lore.kernel.org/r/20190727032122.24639-1-smuchun@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubifs: Correctly use tnc_next() in search_dh_cookie()

commit bacfa94b08027b9f66ede7044972e3b066766b3e upstream.

Commit c877154d307f fixed an uninitialized variable and optimized
the function to not call tnc_next() in the first iteration of the
loop. While this seemed perfectly legit and wise, it turned out to
be illegal.
If the lookup function does not find an exact match it will rewind
the cursor by 1.
The rewinded cursor will not match the name hash we are looking for
and this results in a spurious -ENOENT.
So we need to move to the next entry in case of an non-exact match,
but not if the match was exact.

While we are here, update the documentation to avoid further confusion.

Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: c877154d307f ("ubifs: Fix uninitialized variable in search_dh_cookie()")
Fixes: 781f675e2d7e ("ubifs: Fix unlink code wrt. double hash lookups")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: fix line flag validation in lineevent_create

commit 5ca2f54b597c816df54ff1b28eb99cf7262b955d upstream.

lineevent_create should not allow any of GPIOHANDLE_REQUEST_OUTPUT,
GPIOHANDLE_REQUEST_OPEN_DRAIN or GPIOHANDLE_REQUEST_OPEN_SOURCE to be set.

Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Always allow probing with driver_override

commit 2d2f4273cbe9058d1f5a518e5e880d27d7b3b30f upstream.

Commit 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control
VF driver binding") introduced the sriov_drivers_autoprobe attribute
which allows users to prevent the kernel from automatically probing a
driver for new VFs as they are created.  This allows VFs to be spawned
without automatically binding the new device to a host driver, such as
in cases where the user intends to use the device only with a meta
driver like vfio-pci.  However, the current implementation prevents any
use of drivers_probe with the VF while sriov_drivers_autoprobe=0.  This
blocks the now current general practice of setting driver_override
followed by using drivers_probe to bind a device to a specified driver.

The kernel never automatically sets a driver_override therefore it seems
we can assume a driver_override reflects the intent of the user.  Also,
probing a device using a driver_override match seems outside the scope
of the 'auto' part of sriov_drivers_autoprobe.  Therefore, let's allow
driver_override matches regardless of sriov_drivers_autoprobe, which we
can do by simply testing if a driver_override is set for a device as a
'can probe' condition.

Fixes: 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding")
Link: https://lore.kernel.org/lkml/155742996741.21878.569845487290798703.stgit@gimli.home
Link: https://lore.kernel.org/linux-pci/155672991496.20698.4279330795743262888.stgit@gimli.home/T/#u
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: mtk: Fix wrongly assigned OOB buffer pointer issue

commit 336d4b138be2dad372b67a2388e42805c48aaa38 upstream.

One main goal of the function mtk_nfc_update_ecc_stats is to check
whether sectors are all empty. If they are empty, set these sectors's
data buffer and OOB buffer as 0xff.

But now, the sector OOB buffer pointer is wrongly assigned. We always
do memset from sector 0.

To fix this issue, pass start sector number to make OOB buffer pointer
be properly assigned.

Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device")
Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: rockchip: Don't yell about bad mmc phases when getting

commit 6943b839721ad4a31ad2bacf6e71b21f2dfe3134 upstream.

At boot time, my rk3288-veyron devices yell with 8 lines that look
like this:
  [    0.000000] rockchip_mmc_get_phase: invalid clk rate

This is because the clock framework at clk_register() time tries to
get the phase but we don't have a parent yet.

While the errors appear to be harmless they are still ugly and, in
general, we don't want yells like this in the log unless they are
important.

There's no real reason to be yelling here.  We can still return
-EINVAL to indicate that the phase makes no sense without a parent.
If someone really tries to do tuning and the clock is reported as 0
then we'll see the yells in rockchip_mmc_set_phase().

Fixes: 4bf59902b500 ("clk: rockchip: Prevent calculating mmc phase if clock rate is zero")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/meson: Add support for XBGR8888 & ABGR8888 formats

commit 5ffff4415f9eeae834960226770963e2947e17eb upstream.

Add missing XBGR8888 & ABGR8888 formats variants from the primary plane.

Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429075238.7884-1-narmstrong@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Add barrier_nospec to raw_copy_in_user()

commit 6fbcdd59094ade30db63f32316e9502425d7b256 upstream.

Commit ddf35cf3764b ("powerpc: Use barrier_nospec in copy_from_user()")
Added barrier_nospec before loading from user-controlled pointers. The
intention was to order the load from the potentially user-controlled
pointer vs a previous branch based on an access_ok() check or similar.

In order to achieve the same result, add a barrier_nospec to the
raw_copy_in_user() function before loading from such a user-controlled
pointer.

Fixes: ddf35cf3764b ("powerpc: Use barrier_nospec in copy_from_user()")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/purgatory: Change compiler flags from -mcmodel=kernel to -mcmodel=large to fix kexec relocation errors

commit e16c2983fba0fa6763e43ad10916be35e3d8dc05 upstream.

The last change to this Makefile caused relocation errors when loading
a kdump kernel.  Restore -mcmodel=large (not -mcmodel=kernel),
-ffreestanding, and -fno-zero-initialized-bsss, without reverting to
the former practice of resetting KBUILD_CFLAGS.

Purgatory.ro is a standalone binary that is not linked against the
rest of the kernel.  Its image is copied into an array that is linked
to the kernel, and from there kexec relocates it wherever it desires.

With the previous change to compiler flags, the error "kexec: Overflow
in relocation type 11 value 0x11fffd000" was encountered when trying
to load the crash kernel.  This is from kexec code trying to relocate
the purgatory.ro object.

From the error message, relocation type 11 is R_X86_64_32S.  The
x86_64 ABI says:

  "The R_X86_64_32 and R_X86_64_32S relocations truncate the
   computed value to 32-bits.  The linker must verify that the
   generated value for the R_X86_64_32 (R_X86_64_32S) relocation
   zero-extends (sign-extends) to the original 64-bit value."

This type of relocation doesn't work when kexec chooses to place the
purgatory binary in memory that is not reachable with 32 bit
addresses.

The compiler flag -mcmodel=kernel allows those type of relocations to
be emitted, so revert to using -mcmodel=large as was done before.

Also restore the -ffreestanding and -fno-zero-initialized-bss flags
because they are appropriate for a stand alone piece of object code
which doesn't explicitly zero the bss, and one other report has said
undefined symbols are encountered without -ffreestanding.

These identical compiler flag changes need to happen for every object
that becomes part of the purgatory.ro object, so gather them together
first into PURGATORY_CFLAGS_REMOVE and PURGATORY_CFLAGS, and then
apply them to each of the objects that have C source.  Do not apply
any of these flags to kexec-purgatory.o, which is not part of the
standalone object but part of the kernel proper.

Tested-by: Vaibhav Rustagi <vaibhavrustagi@google.com>
Tested-by: Andreas Smas <andreas@lonelycoder.com>
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: None
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: clang-built-linux@googlegroups.com
Cc: dimitri.sivanich@hpe.com
Cc: mike.travis@hpe.com
Cc: russ.anderson@hpe.com
Fixes: b059f801a937 ("x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS")
Link: https://lkml.kernel.org/r/20190905202346.GA26595@swahl-linux
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andreas Smas <andreas@lonelycoder.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: handle page fault in vmread

commit f7eea636c3d505fe6f1d1066234f1aaf7171b681 upstream.

The implementation of vmread to memory is still incomplete, as it
lacks the ability to do vmread to I/O memory just like vmptrst.

Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: work around leak of uninitialized stack contents

commit 541ab2aeb28251bf7135c7961f3a6080eebcc705 upstream.

Emulation of VMPTRST can incorrectly inject a page fault
when passed an operand that points to an MMIO address.
The page fault will use uninitialized kernel stack memory
as the CR2 and error code.

The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR
exit to userspace; however, it is not an easy fix, so for now just ensure
that the error code and CR2 are zero.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Cc: stable@vger.kernel.org
[add comment]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: Do not leak kernel stack data in the KVM_S390_INTERRUPT ioctl

commit 53936b5bf35e140ae27e4bbf0447a61063f400da upstream.

When the userspace program runs the KVM_S390_INTERRUPT ioctl to inject
an interrupt, we convert them from the legacy struct kvm_s390_interrupt
to the new struct kvm_s390_irq via the s390int_to_s390irq() function.
However, this function does not take care of all types of interrupts
that we can inject into the guest later (see do_inject_vcpu()). Since we
do not clear out the s390irq values before calling s390int_to_s390irq(),
there is a chance that we copy random data from the kernel stack which
could be leaked to the userspace later.

Specifically, the problem exists with the KVM_S390_INT_PFAULT_INIT
interrupt: s390int_to_s390irq() does not handle it, and the function
__inject_pfault_init() later copies irq->u.ext which contains the
random kernel stack data. This data can then be leaked either to
the guest memory in __deliver_pfault_init(), or the userspace might
retrieve it directly with the KVM_S390_GET_IRQ_STATE ioctl.

Fix it by handling that interrupt type in s390int_to_s390irq(), too,
and by making sure that the s390irq struct is properly pre-initialized.
And while we're at it, make sure that s390int_to_s390irq() now
directly returns -EINVAL for unknown interrupt types, so that we
immediately get a proper error code in case we add more interrupt
types to do_inject_vcpu() without updating s390int_to_s390irq()
sometime in the future.

Cc: stable@vger.kernel.org
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/kvm/20190912115438.25761-1-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: kvm_s390_vm_start_migration: check dirty_bitmap before using it as target for memset()

commit 13a17cc0526f08d1df9507f7484176371cd263a0 upstream.

If userspace doesn't set KVM_MEM_LOG_DIRTY_PAGES on memslot before calling
kvm_s390_vm_start_migration(), kernel will oops with:

  Unable to handle kernel pointer dereference in virtual kernel address space
  Failing address: 0000000000000000 TEID: 0000000000000483
  Fault in home space mode while using kernel ASCE.
  AS:0000000002a2000b R2:00000001bff8c00b R3:00000001bff88007 S:00000001bff91000 P:000000000000003d
  Oops: 0004 ilc:2 [#1] SMP
  ...
  Call Trace:
  ([<001fffff804ec552>] kvm_s390_vm_set_attr+0x347a/0x3828 [kvm])
   [<001fffff804ecfc0>] kvm_arch_vm_ioctl+0x6c0/0x1998 [kvm]
   [<001fffff804b67e4>] kvm_vm_ioctl+0x51c/0x11a8 [kvm]
   [<00000000008ba572>] do_vfs_ioctl+0x1d2/0xe58
   [<00000000008bb284>] ksys_ioctl+0x8c/0xb8
   [<00000000008bb2e2>] sys_ioctl+0x32/0x40
   [<000000000175552c>] system_call+0x2b8/0x2d8
  INFO: lockdep is turned off.
  Last Breaking-Event-Address:
   [<0000000000dbaf60>] __memset+0xc/0xa0

due to ms->dirty_bitmap being NULL, which might crash the host.

Make sure that ms->dirty_bitmap is set before using it or
return -EINVAL otherwise.

Cc: <stable@vger.kernel.org>
Fixes: afdad61615cc ("KVM: s390: Fix storage attributes migration with memory slots")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Link: https://lore.kernel.org/kvm/20190911075218.29153-1-imammedo@redhat.com/
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq: Prevent NULL pointer dereference in resend_irqs()

commit eddf3e9c7c7e4d0707c68d1bb22cc6ec8aef7d4a upstream.

The following crash was observed:

  Unable to handle kernel NULL pointer dereference at 0000000000000158
  Internal error: Oops: 96000004 [#1] SMP
  pc : resend_irqs+0x68/0xb0
  lr : resend_irqs+0x64/0xb0
  ...
  Call trace:
   resend_irqs+0x68/0xb0
   tasklet_action_common.isra.6+0x84/0x138
   tasklet_action+0x2c/0x38
   __do_softirq+0x120/0x324
   run_ksoftirqd+0x44/0x60
   smpboot_thread_fn+0x1ac/0x1e8
   kthread+0x134/0x138
   ret_from_fork+0x10/0x18

The reason for this is that the interrupt resend mechanism happens in soft
interrupt context, which is a asynchronous mechanism versus other
operations on interrupts. free_irq() does not take resend handling into
account. Thus, the irq descriptor might be already freed before the resend
tasklet is executed. resend_irqs() does not check the return value of the
interrupt descriptor lookup and derefences the return value
unconditionally.

  1):
  __setup_irq
    irq_startup
      check_irq_resend  // activate softirq to handle resend irq
  2):
  irq_domain_free_irqs
    irq_free_descs
      free_desc
        call_rcu(&desc->rcu, delayed_free_desc)
  3):
  __do_softirq
    tasklet_action
      resend_irqs
        desc = irq_to_desc(irq)
        desc->handle_irq(desc)  // desc is NULL --> Ooops

Fix this by adding a NULL pointer check in resend_irqs() before derefencing
the irq descriptor.

Fixes: a4633adcdbc1 ("[PATCH] genirq: add genirq sw IRQ-retrigger")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1630ae13-5c8e-901e-de09-e740b6a426a7@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbe: Prevent u8 wrapping of ITR value to something less than 10us

commit 377228accbbb8b9738f615d791aa803f41c067e0 upstream.

There were a couple cases where the ITR value generated via the adaptive
ITR scheme could exceed 126. This resulted in the value becoming either 0
or something less than 10. Switching back and forth between a value less
than 10 and a value greater than 10 can cause issues as certain hardware
features such as RSC to not function well when the ITR value has dropped
that low.

CC: stable@vger.kernel.org
Fixes: b4ded8327fea ("ixgbe: Update adaptive ITR algorithm")
Reported-by: Gregg Leventhal <gleventhal@janestreet.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix assertion failure during fsync and use of stale transaction

commit 410f954cb1d1c79ae485dd83a175f21954fd87cd upstream.

Sometimes when fsync'ing a file we need to log that other inodes exist and
when we need to do that we acquire a reference on the inodes and then drop
that reference using iput() after logging them.

That generally is not a problem except if we end up doing the final iput()
(dropping the last reference) on the inode and that inode has a link count
of 0, which can happen in a very short time window if the logging path
gets a reference on the inode while it's being unlinked.

In that case we end up getting the eviction callback, btrfs_evict_inode(),
invoked through the iput() call chain which needs to drop all of the
inode's items from its subvolume btree, and in order to do that, it needs
to join a transaction at the helper function evict_refill_and_join().
However because the task previously started a transaction at the fsync
handler, btrfs_sync_file(), it has current->journal_info already pointing
to a transaction handle and therefore evict_refill_and_join() will get
that transaction handle from btrfs_join_transaction(). From this point on,
two different problems can happen:

1) evict_refill_and_join() will often change the transaction handle's
   block reserve (->block_rsv) and set its ->bytes_reserved field to a
   value greater than 0. If evict_refill_and_join() never commits the
   transaction, the eviction handler ends up decreasing the reference
   count (->use_count) of the transaction handle through the call to
   btrfs_end_transaction(), and after that point we have a transaction
   handle with a NULL ->block_rsv (which is the value prior to the
   transaction join from evict_refill_and_join()) and a ->bytes_reserved
   value greater than 0. If after the eviction/iput completes the inode
   logging path hits an error or it decides that it must fallback to a
   transaction commit, the btrfs fsync handle, btrfs_sync_file(), gets a
   non-zero value from btrfs_log_dentry_safe(), and because of that
   non-zero value it tries to commit the transaction using a handle with
   a NULL ->block_rsv and a non-zero ->bytes_reserved value. This makes
   the transaction commit hit an assertion failure at
   btrfs_trans_release_metadata() because ->bytes_reserved is not zero but
   the ->block_rsv is NULL. The produced stack trace for that is like the
   following:

   [192922.917158] assertion failed: !trans->bytes_reserved, file: fs/btrfs/transaction.c, line: 816
   [192922.917553] ------------[ cut here ]------------
   [192922.917922] kernel BUG at fs/btrfs/ctree.h:3532!
   [192922.918310] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
   [192922.918666] CPU: 2 PID: 883 Comm: fsstress Tainted: G        W         5.1.4-btrfs-next-47 #1
   [192922.919035] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
   [192922.919801] RIP: 0010:assfail.constprop.25+0x18/0x1a [btrfs]
   (...)
   [192922.920925] RSP: 0018:ffffaebdc8a27da8 EFLAGS: 00010286
   [192922.921315] RAX: 0000000000000051 RBX: ffff95c9c16a41c0 RCX: 0000000000000000
   [192922.921692] RDX: 0000000000000000 RSI: ffff95cab6b16838 RDI: ffff95cab6b16838
   [192922.922066] RBP: ffff95c9c16a41c0 R08: 0000000000000000 R09: 0000000000000000
   [192922.922442] R10: ffffaebdc8a27e70 R11: 0000000000000000 R12: ffff95ca731a0980
   [192922.922820] R13: 0000000000000000 R14: ffff95ca84c73338 R15: ffff95ca731a0ea8
   [192922.923200] FS:  00007f337eda4e80(0000) GS:ffff95cab6b00000(0000) knlGS:0000000000000000
   [192922.923579] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   [192922.923948] CR2: 00007f337edad000 CR3: 00000001e00f6002 CR4: 00000000003606e0
   [192922.924329] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
   [192922.924711] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
   [192922.925105] Call Trace:
   [192922.925505]  btrfs_trans_release_metadata+0x10c/0x170 [btrfs]
   [192922.925911]  btrfs_commit_transaction+0x3e/0xaf0 [btrfs]
   [192922.926324]  btrfs_sync_file+0x44c/0x490 [btrfs]
   [192922.926731]  do_fsync+0x38/0x60
   [192922.927138]  __x64_sys_fdatasync+0x13/0x20
   [192922.927543]  do_syscall_64+0x60/0x1c0
   [192922.927939]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
   (...)
   [192922.934077] ---[ end trace f00808b12068168f ]---

2) If evict_refill_and_join() decides to commit the transaction, it will
   be able to do it, since the nested transaction join only increments the
   transaction handle's ->use_count reference counter and it does not
   prevent the transaction from getting committed. This means that after
   eviction completes, the fsync logging path will be using a transaction
   handle that refers to an already committed transaction. What happens
   when using such a stale transaction can be unpredictable, we are at
   least having a use-after-free on the transaction handle itself, since
   the transaction commit will call kmem_cache_free() against the handle
   regardless of its ->use_count value, or we can end up silently losing
   all the updates to the log tree after that iput() in the logging path,
   or using a transaction handle that in the meanwhile was allocated to
   another task for a new transaction, etc, pretty much unpredictable
   what can happen.

In order to fix both of them, instead of using iput() during logging, use
btrfs_add_delayed_iput(), so that the logging path of fsync never drops
the last reference on an inode, that step is offloaded to a safe context
(usually the cleaner kthread).

The assertion failure issue was sporadically triggered by the test case
generic/475 from fstests, which loads the dm error target while fsstress
is running, which lead to fsync failing while logging inodes with -EIO
errors and then trying later to commit the transaction, triggering the
assertion failure.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: fix line flag validation in linehandle_create

commit e95fbc130a162ba9ad956311b95aa0da269eea48 upstream.

linehandle_create should not allow both GPIOHANDLE_REQUEST_INPUT
and GPIOHANDLE_REQUEST_OUTPUT to be set.

Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpiolib: acpi: Add gpiolib_acpi_run_edge_events_on_boot option and blacklist

commit 61f7f7c8f978b1c0d80e43c83b7d110ca0496eb4 upstream.

Another day; another DSDT bug we need to workaround...

Since commit ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events
at least once on boot") we call _AEI edge handlers at boot.

In some rare cases this causes problems. One example of this is the Minix
Neo Z83-4 mini PC, this device has a clear DSDT bug where it has some copy
and pasted code for dealing with Micro USB-B connector host/device role
switching, while the mini PC does not even have a micro-USB connector.
This code, which should not be there, messes with the DDC data pin from
the HDMI connector (switching it to GPIO mode) breaking HDMI support.

To avoid problems like this, this commit adds a new
gpiolib_acpi.run_edge_events_on_boot kernel commandline option, which
allows disabling the running of _AEI edge event handlers at boot.

The default value is -1/auto which uses a DMI based blacklist, the initial
version of this blacklist contains the Neo Z83-4 fixing the HDMI breakage.

Cc: stable@vger.kernel.org
Cc: Daniel Drake <drake@endlessm.com>
Cc: Ian W MORRISON <ianwmorrison@gmail.com>
Reported-by: Ian W MORRISON <ianwmorrison@gmail.com>
Suggested-by: Ian W MORRISON <ianwmorrison@gmail.com>
Fixes: ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20190827202835.213456-1-hdegoede@redhat.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ian W MORRISON <ianwmorrison@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tun: fix use-after-free when register netdev failed

[ Upstream commit 77f22f92dff8e7b45c7786a430626d38071d4670 ]

I got a UAF repport in tun driver when doing fuzzy test:

[  466.269490] ==================================================================
[  466.271792] BUG: KASAN: use-after-free in tun_chr_read_iter+0x2ca/0x2d0
[  466.271806] Read of size 8 at addr ffff888372139250 by task tun-test/2699
[  466.271810]
[  466.271824] CPU: 1 PID: 2699 Comm: tun-test Not tainted 5.3.0-rc1-00001-g5a9433db2614-dirty #427
[  466.271833] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[  466.271838] Call Trace:
[  466.271858]  dump_stack+0xca/0x13e
[  466.271871]  ? tun_chr_read_iter+0x2ca/0x2d0
[  466.271890]  print_address_description+0x79/0x440
[  466.271906]  ? vprintk_func+0x5e/0xf0
[  466.271920]  ? tun_chr_read_iter+0x2ca/0x2d0
[  466.271935]  __kasan_report+0x15c/0x1df
[  466.271958]  ? tun_chr_read_iter+0x2ca/0x2d0
[  466.271976]  kasan_report+0xe/0x20
[  466.271987]  tun_chr_read_iter+0x2ca/0x2d0
[  466.272013]  do_iter_readv_writev+0x4b7/0x740
[  466.272032]  ? default_llseek+0x2d0/0x2d0
[  466.272072]  do_iter_read+0x1c5/0x5e0
[  466.272110]  vfs_readv+0x108/0x180
[  466.299007]  ? compat_rw_copy_check_uvector+0x440/0x440
[  466.299020]  ? fsnotify+0x888/0xd50
[  466.299040]  ? __fsnotify_parent+0xd0/0x350
[  466.299064]  ? fsnotify_first_mark+0x1e0/0x1e0
[  466.304548]  ? vfs_write+0x264/0x510
[  466.304569]  ? ksys_write+0x101/0x210
[  466.304591]  ? do_preadv+0x116/0x1a0
[  466.304609]  do_preadv+0x116/0x1a0
[  466.309829]  do_syscall_64+0xc8/0x600
[  466.309849]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  466.309861] RIP: 0033:0x4560f9
[  466.309875] Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[  466.309889] RSP: 002b:00007ffffa5166e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000127
[  466.322992] RAX: ffffffffffffffda RBX: 0000000000400460 RCX: 00000000004560f9
[  466.322999] RDX: 0000000000000003 RSI: 00000000200008c0 RDI: 0000000000000003
[  466.323007] RBP: 00007ffffa516700 R08: 0000000000000004 R09: 0000000000000000
[  466.323014] R10: 0000000000000000 R11: 0000000000000206 R12: 000000000040cb10
[  466.323021] R13: 0000000000000000 R14: 00000000006d7018 R15: 0000000000000000
[  466.323057]
[  466.323064] Allocated by task 2605:
[  466.335165]  save_stack+0x19/0x80
[  466.336240]  __kasan_kmalloc.constprop.8+0xa0/0xd0
[  466.337755]  kmem_cache_alloc+0xe8/0x320
[  466.339050]  getname_flags+0xca/0x560
[  466.340229]  user_path_at_empty+0x2c/0x50
[  466.341508]  vfs_statx+0xe6/0x190
[  466.342619]  __do_sys_newstat+0x81/0x100
[  466.343908]  do_syscall_64+0xc8/0x600
[  466.345303]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  466.347034]
[  466.347517] Freed by task 2605:
[  466.348471]  save_stack+0x19/0x80
[  466.349476]  __kasan_slab_free+0x12e/0x180
[  466.350726]  kmem_cache_free+0xc8/0x430
[  466.351874]  putname+0xe2/0x120
[  466.352921]  filename_lookup+0x257/0x3e0
[  466.354319]  vfs_statx+0xe6/0x190
[  466.355498]  __do_sys_newstat+0x81/0x100
[  466.356889]  do_syscall_64+0xc8/0x600
[  466.358037]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  466.359567]
[  466.360050] The buggy address belongs to the object at ffff888372139100
[  466.360050]  which belongs to the cache names_cache of size 4096
[  466.363735] The buggy address is located 336 bytes inside of
[  466.363735]  4096-byte region [ffff888372139100, ffff88837213a100)
[  466.367179] The buggy address belongs to the page:
[  466.368604] page:ffffea000dc84e00 refcount:1 mapcount:0 mapping:ffff8883df1b4f00 index:0x0 compound_mapcount: 0
[  466.371582] flags: 0x2fffff80010200(slab|head)
[  466.372910] raw: 002fffff80010200 dead000000000100 dead000000000122 ffff8883df1b4f00
[  466.375209] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[  466.377778] page dumped because: kasan: bad access detected
[  466.379730]
[  466.380288] Memory state around the buggy address:
[  466.381844]  ffff888372139100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.384009]  ffff888372139180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.386131] >ffff888372139200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.388257]                                                  ^
[  466.390234]  ffff888372139280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.392512]  ffff888372139300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.394667] ==================================================================

tun_chr_read_iter() accessed the memory which freed by free_netdev()
called by tun_set_iff():

        CPUA                                           CPUB
  tun_set_iff()
    alloc_netdev_mqs()
    tun_attach()
                                                  tun_chr_read_iter()
                                                    tun_get()
                                                    tun_do_read()
                                                      tun_ring_recv()
    register_netdevice() <-- inject error
    goto err_detach
    tun_detach_all() <-- set RCV_SHUTDOWN
    free_netdev() <-- called from
                     err_free_dev path
      netdev_freemem() <-- free the memory
                        without check refcount
      (In this path, the refcount cannot prevent
       freeing the memory of dev, and the memory
       will be used by dev_put() called by
       tun_chr_read_iter() on CPUB.)
                                                     (Break from tun_ring_recv(),
                                                     because RCV_SHUTDOWN is set)
                                                   tun_put()
                                                     dev_put() <-- use the memory
                                                                   freed by netdev_freemem()

Put the publishing of tfile->tun after register_netdevice(),
so tun_get() won't get the tun pointer that freed by
err_detach path if register_netdevice() failed.

Fixes: eb0fb363f920 ("tuntap: attach queue 0 before registering netdevice")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: add NULL pointer check before calling kfree_rcu

[ Upstream commit 42dec1dbe38239cf91cc1f4df7830c66276ced37 ]

Unlike kfree(p), kfree_rcu(p, rcu) won't do NULL pointer check. When
tipc_nametbl_remove_publ returns NULL, the panic below happens:

   BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
   RIP: 0010:__call_rcu+0x1d/0x290
   Call Trace:
    <IRQ>
    tipc_publ_notify+0xa9/0x170 [tipc]
    tipc_node_write_unlock+0x8d/0x100 [tipc]
    tipc_node_link_down+0xae/0x1d0 [tipc]
    tipc_node_check_dest+0x3ea/0x8f0 [tipc]
    ? tipc_disc_rcv+0x2c7/0x430 [tipc]
    tipc_disc_rcv+0x2c7/0x430 [tipc]
    ? tipc_rcv+0x6bb/0xf20 [tipc]
    tipc_rcv+0x6bb/0xf20 [tipc]
    ? ip_route_input_slow+0x9cf/0xb10
    tipc_udp_recv+0x195/0x1e0 [tipc]
    ? tipc_udp_is_known_peer+0x80/0x80 [tipc]
    udp_queue_rcv_skb+0x180/0x460
    udp_unicast_rcv_skb.isra.56+0x75/0x90
    __udp4_lib_rcv+0x4ce/0xb90
    ip_local_deliver_finish+0x11c/0x210
    ip_local_deliver+0x6b/0xe0
    ? ip_rcv_finish+0xa9/0x410
    ip_rcv+0x273/0x362

Fixes: 97ede29e80ee ("tipc: convert name table read-write lock to RCU")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR

[ Upstream commit af38d07ed391b21f7405fa1f936ca9686787d6d2 ]

Fix tcp_ecn_withdraw_cwr() to clear the correct bit:
TCP_ECN_QUEUE_CWR.

Rationale: basically, TCP_ECN_DEMAND_CWR is a bit that is purely about
the behavior of data receivers, and deciding whether to reflect
incoming IP ECN CE marks as outgoing TCP th->ece marks. The
TCP_ECN_QUEUE_CWR bit is purely about the behavior of data senders,
and deciding whether to send CWR. The tcp_ecn_withdraw_cwr() function
is only called from tcp_undo_cwnd_reduction() by data senders during
an undo, so it should zero the sender-side state,
TCP_ECN_QUEUE_CWR. It does not make sense to stop the reflection of
incoming CE bits on incoming data packets just because outgoing
packets were spuriously retransmitted.

The bug has been reproduced with packetdrill to manifest in a scenario
with RFC3168 ECN, with an incoming data packet with CE bit set and
carrying a TCP timestamp value that causes cwnd undo. Before this fix,
the IP CE bit was ignored and not reflected in the TCP ECE header bit,
and sender sent a TCP CWR ('W') bit on the next outgoing data packet,
even though the cwnd reduction had been undone.  After this fix, the
sender properly reflects the CE bit and does not set the W bit.

Note: the bug actually predates 2005 git history; this Fixes footer is
chosen to be the oldest SHA1 I have tested (from Sep 2007) for which
the patch applies cleanly (since before this commit the code was in a
.h file).

Fixes: bdf1ee5d3bd3 ("[TCP]: Move code from tcp_ecn.h to tcp*.c and tcp.h & remove it")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: use transport pf_retrans in sctp_do_8_2_transport_strike

[ Upstream commit 10eb56c582c557c629271f1ee31e15e7a9b2558b ]

Transport should use its own pf_retrans to do the error_count
check, instead of asoc's. Otherwise, it's meaningless to make
pf_retrans per transport.

Fixes: 5aa93bcf66f4 ("sctp: Implement quick failover draft from tsvwg")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()'

[ Upstream commit b456d72412ca8797234449c25815e82f4e1426c0 ]

The '.exit' functions from 'pernet_operations' structure should be marked
as __net_exit, not __net_init.

Fixes: 8e2d61e0aed2 ("sctp: fix race on protocol/netns initialization")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sch_hhf: ensure quantum and hhf_non_hh_weight are non-zero

[ Upstream commit d4d6ec6dac07f263f06d847d6f732d6855522845 ]

In case of TCA_HHF_NON_HH_WEIGHT or TCA_HHF_QUANTUM is zero,
it would make no progress inside the loop in hhf_dequeue() thus
kernel would get stuck.

Fix this by checking this corner case in hhf_change().

Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Reported-by: syzbot+bc6297c11f19ee807dc2@syzkaller.appspotmail.com
Reported-by: syzbot+041483004a7f45f1f20a@syzkaller.appspotmail.com
Reported-by: syzbot+55be5f513bed37fc4367@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Terry Lam <vtlam@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sched: fix reordering issues

[ Upstream commit b88dd52c62bb5c5d58f0963287f41fd084352c57 ]

Whenever MQ is not used on a multiqueue device, we experience
serious reordering problems. Bisection found the cited
commit.

The issue can be described this way :

- A single qdisc hierarchy is shared by all transmit queues.
  (eg : tc qdisc replace dev eth0 root fq_codel)

- When/if try_bulk_dequeue_skb_slow() dequeues a packet targetting
  a different transmit queue than the one used to build a packet train,
  we stop building the current list and save the 'bad' skb (P1) in a
  special queue. (bad_txq)

- When dequeue_skb() calls qdisc_dequeue_skb_bad_txq() and finds this
  skb (P1), it checks if the associated transmit queues is still in frozen
  state. If the queue is still blocked (by BQL or NIC tx ring full),
  we leave the skb in bad_txq and return NULL.

- dequeue_skb() calls q->dequeue() to get another packet (P2)

  The other packet can target the problematic queue (that we found
  in frozen state for the bad_txq packet), but another cpu just ran
  TX completion and made room in the txq that is now ready to accept
  new packets.

- Packet P2 is sent while P1 is still held in bad_txq, P1 might be sent
  at next round. In practice P2 is the lead of a big packet train
  (P2,P3,P4 ...) filling the BQL budget and delaying P1 by many packets :/

To solve this problem, we have to block the dequeue process as long
as the first packet in bad_txq can not be sent. Reordering issues
disappear and no side effects have been seen.

Fixes: a53851e2c321 ("net: sched: explicit locking in gso_cpu fallback")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phylink: Fix flow control resolution

[ Upstream commit 63b2ed4e10b2e6c913e1d8cdd728e7fba4115a3d ]

Regarding to IEEE 802.3-2015 standard section 2
28B.3 Priority resolution - Table 28-3 - Pause resolution

In case of Local device Pause=1 AsymDir=0, Link partner
Pause=1 AsymDir=1, Local device resolution should be enable PAUSE
transmit, disable PAUSE receive.
And in case of Local device Pause=1 AsymDir=1, Link partner
Pause=1 AsymDir=0, Local device resolution should be enable PAUSE
receive, disable PAUSE transmit.

Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Reported-by: Shaul Ben-Mayor <shaulb@marvell.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list

[ Upstream commit 3dcbdb134f329842a38f0e6797191b885ab00a00 ]

Historically, support for frag_list packets entering skb_segment() was
limited to frag_list members terminating on exact same gso_size
boundaries. This is verified with a BUG_ON since commit 89319d3801d1
("net: Add frag_list support to skb_segment"), quote:

    As such we require all frag_list members terminate on exact MSS
    boundaries.  This is checked using BUG_ON.
    As there should only be one producer in the kernel of such packets,
    namely GRO, this requirement should not be difficult to maintain.

However, since commit 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper"),
the "exact MSS boundaries" assumption no longer holds:
An eBPF program using bpf_skb_change_proto() DOES modify 'gso_size', but
leaves the frag_list members as originally merged by GRO with the
original 'gso_size'. Example of such programs are bpf-based NAT46 or
NAT64.

This lead to a kernel BUG_ON for flows involving:
 - GRO generating a frag_list skb
 - bpf program performing bpf_skb_change_proto() or bpf_skb_adjust_room()
 - skb_segment() of the skb

See example BUG_ON reports in [0].

In commit 13acc94eff12 ("net: permit skb_segment on head_frag frag_list skb"),
skb_segment() was modified to support the "gso_size mangling" case of
a frag_list GRO'ed skb, but *only* for frag_list members having
head_frag==true (having a page-fragment head).

Alas, GRO packets having frag_list members with a linear kmalloced head
(head_frag==false) still hit the BUG_ON.

This commit adds support to skb_segment() for a 'head_skb' packet having
a frag_list whose members are *non* head_frag, with gso_size mangled, by
disabling SG and thus falling-back to copying the data from the given
'head_skb' into the generated segmented skbs - as suggested by Willem de
Bruijn [1].

Since this approach involves the penalty of skb_copy_and_csum_bits()
when building the segments, care was taken in order to enable this
solution only when required:
 - untrusted gso_size, by testing SKB_GSO_DODGY is set
   (SKB_GSO_DODGY is set by any gso_size mangling functions in
    net/core/filter.c)
 - the frag_list is non empty, its item is a non head_frag, *and* the
   headlen of the given 'head_skb' does not match the gso_size.

[0]
https://lore.kernel.org/netdev/20190826170724.25ff616f@pixies/
https://lore.kernel.org/netdev/9265b93f-253d-6b8c-f2b8-4b54eff1835c@fb.com/

[1]
https://lore.kernel.org/netdev/CA+FuTSfVsgNDi7c=GUU8nMg2hWxF2SjCNLXetHeVPdnxAW5K-w@mail.gmail.com/

Fixes: 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper")
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Fix null de-reference of device refcount

[ Upstream commit 10cc514f451a0f239aa34f91bc9dc954a9397840 ]

In event of failure during register_netdevice, free_netdev is
invoked immediately. free_netdev assumes that all the netdevice
refcounts have been dropped prior to it being called and as a
result frees and clears out the refcount pointer.

However, this is not necessarily true as some of the operations
in the NETDEV_UNREGISTER notifier handlers queue RCU callbacks for
invocation after a grace period. The IPv4 callback in_dev_rcu_put
tries to access the refcount after free_netdev is called which
leads to a null de-reference-

44837.761523:   <6> Unable to handle kernel paging request at
                    virtual address 0000004a88287000
44837.761651:   <2> pc : in_dev_finish_destroy+0x4c/0xc8
44837.761654:   <2> lr : in_dev_finish_destroy+0x2c/0xc8
44837.762393:   <2> Call trace:
44837.762398:   <2>  in_dev_finish_destroy+0x4c/0xc8
44837.762404:   <2>  in_dev_rcu_put+0x24/0x30
44837.762412:   <2>  rcu_nocb_kthread+0x43c/0x468
44837.762418:   <2>  kthread+0x118/0x128
44837.762424:   <2>  ret_from_fork+0x10/0x1c

Fix this by waiting for the completion of the call_rcu() in
case of register_netdevice errors.

Fixes: 93ee31f14f6f ("[NET]: Fix free_netdev on register_netdev failure.")
Cc: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbe: Fix secpath usage for IPsec TX offload.

[ Upstream commit f39b683d35dfa93a58f1b400a8ec0ff81296b37c ]

The ixgbe driver currently does IPsec TX offloading
based on an existing secpath. However, the secpath
can also come from the RX side, in this case it is
misinterpreted for TX offload and the packets are
dropped with a "bad sa_idx" error. Fix this by using
the xfrm_offload() function to test for TX offload.

Fixes: 592594704761 ("ixgbe: process the Tx ipsec offload")
Reported-by: Michael Marley <michael@michaelmarley.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

isdn/capi: check message length in capi_write()

[ Upstream commit fe163e534e5eecdfd7b5920b0dfd24c458ee85d6 ]

syzbot reported:

    BUG: KMSAN: uninit-value in capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700
    CPU: 0 PID: 10025 Comm: syz-executor379 Not tainted 4.20.0-rc7+ #2
    Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
    Call Trace:
      __dump_stack lib/dump_stack.c:77 [inline]
      dump_stack+0x173/0x1d0 lib/dump_stack.c:113
      kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
      __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
      capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700
      do_loop_readv_writev fs/read_write.c:703 [inline]
      do_iter_write+0x83e/0xd80 fs/read_write.c:961
      vfs_writev fs/read_write.c:1004 [inline]
      do_writev+0x397/0x840 fs/read_write.c:1039
      __do_sys_writev fs/read_write.c:1112 [inline]
      __se_sys_writev+0x9b/0xb0 fs/read_write.c:1109
      __x64_sys_writev+0x4a/0x70 fs/read_write.c:1109
      do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
      entry_SYSCALL_64_after_hwframe+0x63/0xe7
    [...]

The problem is that capi_write() is reading past the end of the message.
Fix it by checking the message's length in the needed places.

Reported-and-tested-by: syzbot+0849c524d9c634f5ae66@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()'

[ Upstream commit d23dbc479a8e813db4161a695d67da0e36557846 ]

The '.exit' functions from 'pernet_operations' structure should be marked
as __net_exit, not __net_init.

Fixes: d862e5461423 ("net: ipv6: Implement /proc/net/icmp6.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cdc_ether: fix rndis support for Mediatek based smartphones

[ Upstream commit 4d7ffcf3bf1be98d876c570cab8fc31d9fa92725 ]

A Mediatek based smartphone owner reports problems with USB
tethering in Linux.  The verbose USB listing shows a rndis_host
interface pair (e0/01/03 + 10/00/00), but the driver fails to
bind with

[  355.960428] usb 1-4: bad CDC descriptors

The problem is a failsafe test intended to filter out ACM serial
functions using the same 02/02/ff class/subclass/protocol as RNDIS.
The serial functions are recognized by their non-zero bmCapabilities.

No RNDIS function with non-zero bmCapabilities were known at the time
this failsafe was added. But it turns out that some Wireless class
RNDIS functions are using the bmCapabilities field. These functions
are uniquely identified as RNDIS by their class/subclass/protocol, so
the failing test can safely be disabled.  The same applies to the two
types of Misc class RNDIS functions.

Applying the failsafe to Communication class functions only retains
the original functionality, and fixes the problem for the Mediatek based
smartphone.

Tow examples of CDC functional descriptors with non-zero bmCapabilities
from Wireless class RNDIS functions are:

0e8d:000a  Mediatek Crosscall Spider X5 3G Phone

      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x0f
          connection notifications
          sends break
          line coding and serial state
          get/set/clear comm features
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1

and

19d2:1023  ZTE K4201-z

      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1

The Mediatek example is believed to apply to most smartphones with
Mediatek firmware.  The ZTE example is most likely also part of a larger
family of devices/firmwares.

Suggested-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bridge/mdb: remove wrong use of NLM_F_MULTI

[ Upstream commit 94a72b3f024fc7e9ab640897a1e38583a470659d ]

NLM_F_MULTI must be used only when a NLMSG_DONE message is sent at the end.
In fact, NLMSG_DONE is sent only at the end of a dump.

Libraries like libnl will wait forever for NLMSG_DONE.

Fixes: 949f1e39a617 ("bridge: mdb: notify on router port add and del")
CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.73

vhost: make sure log_num < in_num

commit 060423bfdee3f8bc6e2c1bac97de24d5415e2bc4 upstream.

The code assumes log_num < in_num everywhere, and that is true as long as
in_num is incremented by descriptor iov count, and log_num by 1. However
this breaks if there's a zero sized descriptor.

As a result, if a malicious guest creates a vring desc with desc.len = 0,
it may cause the host kernel to crash by overflowing the log array. This
bug can be triggered during the VM migration.

There's no need to log when desc.len = 0, so just don't increment log_num
in this case.

Fixes: 3a4d5c94e959 ("vhost_net: a kernel-level virtio server")
Cc: stable@vger.kernel.org
Reviewed-by: Lidong Chen <lidongchen@tencent.com>
Signed-off-by: ruippan <ruippan@tencent.com>
Signed-off-by: yongduan <yongduan@tencent.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/tm: Fix restoring FP/VMX facility incorrectly on interrupts

[ Upstream commit a8318c13e79badb92bc6640704a64cc022a6eb97 ]

When in userspace and MSR FP=0 the hardware FP state is unrelated to
the current process. This is extended for transactions where if tbegin
is run with FP=0, the hardware checkpoint FP state will also be
unrelated to the current process. Due to this, we need to ensure this
hardware checkpoint is updated with the correct state before we enable
FP for this process.

Unfortunately we get this wrong when returning to a process from a
hardware interrupt. A process that starts a transaction with FP=0 can
take an interrupt. When the kernel returns back to that process, we
change to FP=1 but with hardware checkpoint FP state not updated. If
this transaction is then rolled back, the FP registers now contain the
wrong state.

The process looks like this:
   Userspace:                      Kernel

               Start userspace
                with MSR FP=0 TM=1
                  < -----
   ...
   tbegin
   bne
               Hardware interrupt
                   ---- >
                                    <do_IRQ...>
                                    ....
                                    ret_from_except
                                      restore_math()
        /* sees FP=0 */
                                        restore_fp()
                                          tm_active_with_fp()
    /* sees FP=1 (Incorrect) */
                                          load_fp_state()
                                        FP = 0 -> 1
                  < -----
               Return to userspace
                 with MSR TM=1 FP=1
                 with junk in the FP TM checkpoint
   TM rollback
   reads FP junk

When returning from the hardware exception, tm_active_with_fp() is
incorrectly making restore_fp() call load_fp_state() which is setting
FP=1.

The fix is to remove tm_active_with_fp().

tm_active_with_fp() is attempting to handle the case where FP state
has been changed inside a transaction. In this case the checkpointed
and transactional FP state is different and hence we must restore the
FP state (ie. we can't do lazy FP restore inside a transaction that's
used FP). It's safe to remove tm_active_with_fp() as this case is
handled by restore_tm_state(). restore_tm_state() detects if FP has
been using inside a transaction and will set load_fp and call
restore_math() to ensure the FP state (checkpoint and transaction) is
restored.

This is a data integrity problem for the current process as the FP
registers are corrupted. It's also a security problem as the FP
registers from one process may be leaked to another.

Similarly for VMX.

A simple testcase to replicate this will be posted to
tools/testing/selftests/powerpc/tm/tm-poison.c

This fixes CVE-2019-15031.

Fixes: a7771176b439 ("powerpc: Don't enable FP/Altivec if not checkpointed")
Cc: stable@vger.kernel.org # 4.15+
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190904045529.23002-2-gromero@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/tm: Remove msr_tm_active()

[ Upstream commit 5c784c8414fba11b62e12439f11e109fb5751f38 ]

Currently msr_tm_active() is a wrapper around MSR_TM_ACTIVE() if
CONFIG_PPC_TRANSACTIONAL_MEM is set, or it is just a function that
returns false if CONFIG_PPC_TRANSACTIONAL_MEM is not set.

This function is not necessary, since MSR_TM_ACTIVE() just do the same and
could be used, removing the dualism and simplifying the code.

This patchset remove every instance of msr_tm_active() and replaced it
by MSR_TM_ACTIVE().

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Reset both NVIDIA GPU and HDA in ThinkPad P50 workaround

[ Upstream commit ad54567ad5d8e938ee6cf02e4f3867f18835ae6e ]

quirk_reset_lenovo_thinkpad_50_nvgpu() resets NVIDIA GPUs to work around
an apparent BIOS defect.  It previously used pci_reset_function(), and
the available method was a bus reset, which was fine because there was
only one function on the bus.  After b516ea586d71 ("PCI: Enable NVIDIA
HDA controllers"), there are now two functions (the HDA controller and
the GPU itself) on the bus, so the reset fails.

Use pci_reset_bus() explicitly instead of pci_reset_function() since it's
OK to reset both devices.

[bhelgaas: commit log, add e0547c81bfcf]
Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers")
Fixes: e0547c81bfcf ("PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary")
Link: https://lore.kernel.org/r/20190801220117.14952-1-lyude@redhat.com
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Daniel Drake <drake@endlessm.com>
Cc: Aaron Plattner <aplattner@nvidia.com>
Cc: Peter Wu <peter@lekensteyn.nl>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Maik Freudenberg <hhfeuer@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: unsigned int compared against zero

[ Upstream commit fbbbbd2f28aec991f3fbc248df211550fbdfd58c ]

There are two cases where u32 variables n and err are being checked
for less than zero error values, the checks is always false because
the variables are not signed. Fix this by making the variables ints.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 345c0dbf3a30 ("ext4: protect journal inode's blocks using block_validity")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: fix block validity checks for journal inodes using indirect blocks

[ Upstream commit 170417c8c7bb2cbbdd949bf5c443c0c8f24a203b ]

Commit 345c0dbf3a30 ("ext4: protect journal inode's blocks using
block_validity") failed to add an exception for the journal inode in
ext4_check_blockref(), which is the function used by ext4_get_branch()
for indirect blocks.  This caused attempts to read from the ext3-style
journals to fail with:

[  848.968550] EXT4-fs error (device sdb7): ext4_get_branch:171: inode #8: block 30343695: comm jbd2/sdb7-8: invalid block

Fix this by adding the missing exception check.

Fixes: 345c0dbf3a30 ("ext4: protect journal inode's blocks using block_validity")
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: don't perform block validity checks on the journal inode

[ Upstream commit 0a944e8a6c66ca04c7afbaa17e22bf208a8b37f0 ]

Since the journal inode is already checked when we added it to the
block validity's system zone, if we check it again, we'll just trigger
a failure.

This was causing failures like this:

[   53.897001] EXT4-fs error (device sda): ext4_find_extent:909: inode
#8: comm jbd2/sda-8: pblk 121667583 bad header/extent: invalid extent entries - magic f30a, entries 8, max 340(340), depth 0(0)
[   53.931430] jbd2_journal_bmap: journal block not found at offset 49 on sda-8
[   53.938480] Aborting journal on device sda-8.

... but only if the system was under enough memory pressure that
logical->physical mapping for the journal inode gets pushed out of the
extent cache.  (This is why it wasn't noticed earlier.)

Fixes: 345c0dbf3a30 ("ext4: protect journal inode's blocks using block_validity")
Reported-by: Dan Rue <dan.rue@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors

[ Upstream commit 34ca26a98ad67edd6e4870fe2d4aa047d41a51dd ]

It appears when testing my previous fix for some of the legacy
modesetting issues with MST, I misattributed some kernel splats that
started appearing on my machine after a rebase as being from upstream.
But it appears they actually came from my patch series:

[    2.980512] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
[    2.980516] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] is not registered
[    2.980516] ------------[ cut here ]------------
[    2.980519] Could not determine valid watermarks for inherited state
[    2.980553] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915]
[    2.980556] Modules linked in: i915(O+) i2c_algo_bit drm_kms_helper(O) syscopyarea sysfillrect sysimgblt fb_sys_fops drm(O) intel_rapl x86_pkg_temp_thermal iTCO_wdt wmi_bmof coretemp crc32_pclmul psmouse i2c_i801 mei_me mei i2c_core lpc_ich mfd_core tpm_tis tpm_tis_core wmi tpm thinkpad_acpi pcc_cpufreq video ehci_pci crc32c_intel serio_raw ehci_hcd xhci_pci xhci_hcd
[    2.980577] CPU: 3 PID: 551 Comm: systemd-udevd Tainted: G           O      4.19.0-rc7Lyude-Test+ #1
[    2.980579] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET63WW (1.27 ) 11/10/2016
[    2.980605] RIP: 0010:intel_modeset_init+0x14d7/0x19f0 [i915]
[    2.980607] Code: 89 df e8 ec 27 02 00 e9 24 f2 ff ff be 03 00 00 00 48 89 df e8 da 27 02 00 e9 26 f2 ff ff 48 c7 c7 c8 d1 34 a0 e8 23 cf dc e0 <0f> 0b e9 7c fd ff ff f6 c4 04 0f 85 37 f7 ff ff 48 8b 83 60 08 00
[    2.980611] RSP: 0018:ffffc90000287988 EFLAGS: 00010282
[    2.980614] RAX: 0000000000000000 RBX: ffff88031b488000 RCX: 0000000000000006
[    2.980617] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff880321ad54d0
[    2.980620] RBP: ffffc90000287a10 R08: 000000000000040a R09: 0000000000000065
[    2.980623] R10: ffff88030ebb8f00 R11: ffffffff81416590 R12: ffff88031b488000
[    2.980626] R13: ffff88031b4883a0 R14: ffffc900002879a8 R15: ffff880319099800
[    2.980630] FS:  00007f475620d180(0000) GS:ffff880321ac0000(0000) knlGS:0000000000000000
[    2.980633] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.980636] CR2: 00007f9ef28018a0 CR3: 000000031b72c001 CR4: 00000000003606e0
[    2.980639] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    2.980642] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    2.980645] Call Trace:
[    2.980675]  i915_driver_load+0xb0e/0xdc0 [i915]
[    2.980681]  ? kernfs_add_one+0xe7/0x130
[    2.980709]  i915_pci_probe+0x46/0x60 [i915]
[    2.980715]  pci_device_probe+0xd4/0x150
[    2.980719]  really_probe+0x243/0x3b0
[    2.980722]  driver_probe_device+0xba/0x100
[    2.980726]  __driver_attach+0xe4/0x110
[    2.980729]  ? driver_probe_device+0x100/0x100
[    2.980733]  bus_for_each_dev+0x74/0xb0
[    2.980736]  driver_attach+0x1e/0x20
[    2.980739]  bus_add_driver+0x159/0x230
[    2.980743]  ? 0xffffffffa0393000
[    2.980746]  driver_register+0x70/0xc0
[    2.980749]  ? 0xffffffffa0393000
[    2.980753]  __pci_register_driver+0x57/0x60
[    2.980780]  i915_init+0x55/0x58 [i915]
[    2.980785]  do_one_initcall+0x4a/0x1c4
[    2.980789]  ? do_init_module+0x27/0x210
[    2.980793]  ? kmem_cache_alloc_trace+0x131/0x190
[    2.980797]  do_init_module+0x60/0x210
[    2.980800]  load_module+0x2063/0x22e0
[    2.980804]  ? vfs_read+0x116/0x140
[    2.980807]  ? vfs_read+0x116/0x140
[    2.980811]  __do_sys_finit_module+0xbd/0x120
[    2.980814]  ? __do_sys_finit_module+0xbd/0x120
[    2.980818]  __x64_sys_finit_module+0x1a/0x20
[    2.980821]  do_syscall_64+0x5a/0x110
[    2.980824]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    2.980826] RIP: 0033:0x7f4754e32879
[    2.980828] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f7 45 2c 00 f7 d8 64 89 01 48
[    2.980831] RSP: 002b:00007fff43fd97d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    2.980834] RAX: ffffffffffffffda RBX: 0000559a44ca64f0 RCX: 00007f4754e32879
[    2.980836] RDX: 0000000000000000 RSI: 00007f475599f4cd RDI: 0000000000000018
[    2.980838] RBP: 00007f475599f4cd R08: 0000000000000000 R09: 0000000000000000
[    2.980839] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000000000
[    2.980841] R13: 0000559a44c92fd0 R14: 0000000000020000 R15: 0000000000000000
[    2.980881] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915]
[    2.980884] ---[ end trace 5eb47a76277d4731 ]---

The cause of this appears to be due to the fact that if there's
pre-existing display state that was set by the BIOS when i915 loads, it
will attempt to perform a modeset before the driver is registered with
userspace. Since this happens before the driver's registered with
userspace, it's connectors are also unregistered and thus-states which
would turn on DPMS on a connector end up getting rejected since the
connector isn't registered.

These bugs managed to get past Intel's CI partially due to the fact it
never ran a full test on my patches for some reason, but also because
all of the tests unload the GPU once before running. Since this bug is
only really triggered when the drivers tries to perform a modeset before
it's been fully registered with userspace when coming from whatever
display configuration the firmware left us with, it likely would never
have been picked up by CI in the first place.

After some discussion with vsyrjala, we decided the best course of
action would be to just move the unregistered connector checks out of
update_connector_routing() and into drm_atomic_set_crtc_for_connector().
The reason for this being that legacy modesetting isn't going to be
expecting failures anywhere (at least this is the case with X), so
ideally we want to ensure that any DPMS changes will still work even on
unregistered connectors. Instead, we now only reject new modesets which
would change the current CRTC assigned to an unregistered connector
unless no new CRTC is being assigned to replace the connector's previous
one.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 4d80273976bf ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009204424.21462-1-lyude@redhat.com
(cherry picked from commit b5d29843d8ef86d4cde4742e095b81b7fd41e688)
Fixes: e96550956fbc ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio/s390: fix race on airq_areas[]

[ Upstream commit 4f419eb14272e0698e8c55bb5f3f266cc2a21c81 ]

The access to airq_areas was racy ever since the adapter interrupts got
introduced to virtio-ccw, but since commit 39c7dcb15892 ("virtio/s390:
make airq summary indicators DMA") this became an issue in practice as
well. Namely before that commit the airq_info that got overwritten was
still functional. After that commit however the two infos share a
summary_indicator, which aggravates the situation. Which means
auto-online mechanism occasionally hangs the boot with virtio_blk.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 96b14536d935 ("virtio-ccw: virtio-ccw adapter interrupt support.")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Make sure cdclk is high enough for DP audio on VLV/CHV

[ Upstream commit a8f196a0fa6391a436f63f360a1fb57031fdf26c ]

On VLV/CHV there is some kind of linkage between the cdclk frequency
and the DP link frequency. The spec says:
"For DP audio configuration, cdclk frequency shall be set to
 meet the following requirements:
 DP Link Frequency(MHz) | Cdclk frequency(MHz)
 270                    | 320 or higher
 162                    | 200 or higher"

I suspect that would more accurately be expressed as
"cdclk >= DP link clock", and in any case we can express it like
that in the code because of the limited set of cdclk (200, 266,
320, 400 MHz) and link frequencies (162 and 270 MHz) we support.

Without this we can end up in a situation where the cdclk
is too low and enabling DP audio will kill the pipe. Happens
eg. with 2560x1440 modes where the 266MHz cdclk is sufficient
to pump the pixels (241.5 MHz dotclock) but is too low for
the DP audio due to the link frequency being 270 MHz.

v2: Spell out the cdclk and link frequencies we actually support

Cc: stable@vger.kernel.org
Tested-by: Stefan Gottwald <gottwald@igel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111149
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717114536.22937-1-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit bffb31f73b29a60ef693842d8744950c2819851d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: fix race in btree_flush_write()

[ Upstream commit 50a260e859964002dab162513a10f91ae9d3bcd3 ]

There is a race between mca_reap(), btree_node_free() and journal code
btree_flush_write(), which results very rare and strange deadlock or
panic and are very hard to reproduce.

Let me explain how the race happens. In btree_flush_write() one btree
node with oldest journal pin is selected, then it is flushed to cache
device, the select-and-flush is a two steps operation. Between these two
steps, there are something may happen inside the race window,
- The selected btree node was reaped by mca_reap() and allocated to
  other requesters for other btree node.
- The slected btree node was selected, flushed and released by mca
  shrink callback bch_mca_scan().
When btree_flush_write() tries to flush the selected btree node, firstly
b->write_lock is held by mutex_lock(). If the race happens and the
memory of selected btree node is allocated to other btree node, if that
btree node's write_lock is held already, a deadlock very probably
happens here. A worse case is the memory of the selected btree node is
released, then all references to this btree node (e.g. b->write_lock)
will trigger NULL pointer deference panic.

This race was introduced in commit cafe56359144 ("bcache: A block layer
cache"), and enlarged by commit c4dc2497d50d ("bcache: fix high CPU
occupancy during journal"), which selected 128 btree nodes and flushed
them one-by-one in a quite long time period.

Such race is not easy to reproduce before. On a Lenovo SR650 server with
48 Xeon cores, and configure 1 NVMe SSD as cache device, a MD raid0
device assembled by 3 NVMe SSDs as backing device, this race can be
observed around every 10,000 times btree_flush_write() gets called. Both
deadlock and kernel panic all happened as aftermath of the race.

The idea of the fix is to add a btree flag BTREE_NODE_journal_flush. It
is set when selecting btree nodes, and cleared after btree nodes
flushed. Then when mca_reap() selects a btree node with this bit set,
this btree node will be skipped. Since mca_reap() only reaps btree node
without BTREE_NODE_journal_flush flag, such race is avoided.

Once corner case should be noticed, that is btree_node_free(). It might
be called in some error handling code path. For example the following
code piece from btree_split(),
        2149 err_free2:
        2150         bkey_put(b->c, &n2->key);
        2151         btree_node_free(n2);
        2152         rw_unlock(true, n2);
        2153 err_free1:
        2154         bkey_put(b->c, &n1->key);
        2155         btree_node_free(n1);
        2156         rw_unlock(true, n1);
At line 2151 and 2155, the btree node n2 and n1 are released without
mac_reap(), so BTREE_NODE_journal_flush also needs to be checked here.
If btree_node_free() is called directly in such error handling path,
and the selected btree node has BTREE_NODE_journal_flush bit set, just
delay for 1 us and retry again. In this case this btree node won't
be skipped, just retry until the BTREE_NODE_journal_flush bit cleared,
and free the btree node memory.

Fixes: cafe56359144 ("bcache: A block layer cache")
Signed-off-by: Coly Li <colyli@suse.de>
Reported-and-tested-by: kbuild test robot <lkp@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: add comments for mutex_lock(&b->write_lock)

[ Upstream commit 41508bb7d46b74dba631017e5a702a86caf1db8c ]

When accessing or modifying BTREE_NODE_dirty bit, it is not always
necessary to acquire b->write_lock. In bch_btree_cache_free() and
mca_reap() acquiring b->write_lock is necessary, and this patch adds
comments to explain why mutex_lock(&b->write_lock) is necessary for
checking or clearing BTREE_NODE_dirty bit there.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: only clear BTREE_NODE_dirty bit when it is set

[ Upstream commit e5ec5f4765ada9c75fb3eee93a6e72f0e50599d5 ]

In bch_btree_cache_free() and btree_node_free(), BTREE_NODE_dirty is
always set no matter btree node is dirty or not. The code looks like
this,
if (btree_node_dirty(b))
btree_complete_write(b, btree_current_write(b));
clear_bit(BTREE_NODE_dirty, &b->flags);

Indeed if btree_node_dirty(b) returns false, it means BTREE_NODE_dirty
bit is cleared, then it is unnecessary to clear the bit again.

This patch only clears BTREE_NODE_dirty when btree_node_dirty(b) is
true (the bit is set), to save a few CPU cycles.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4: Fix delegation state recovery

[ Upstream commit 5eb8d18ca0e001c6055da2b7f30d8f6dca23a44f ]

Once we clear the NFS_DELEGATED_STATE flag, we're telling
nfs_delegation_claim_opens() that we're done recovering all open state
for that stateid, so we really need to ensure that we test for all
open modes that are currently cached and recover them before exiting
nfs4_open_delegation_recall().

Fixes: 24311f884189d ("NFSv4: Recovery of recalled read delegations...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: gyroadc: fix uninitialized return code

[ Upstream commit 90c6260c1905a68fb596844087f2223bd4657fee ]

gcc-9 complains about a blatant uninitialized variable use that
all earlier compiler versions missed:

drivers/iio/adc/rcar-gyroadc.c:510:5: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized]

Return -EINVAL instead here and a few lines above it where
we accidentally return 0 on failure.

Cc: stable@vger.kernel.org
Fixes: 059c53b32329 ("iio: adc: Add Renesas GyroADC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/migrate.c: initialize pud_entry in migrate_vma()

[ Upstream commit 7b358c6f12dc82364f6d317f8c8f1d794adbc3f5 ]

When CONFIG_MIGRATE_VMA_HELPER is enabled, migrate_vma() calls
migrate_vma_collect() which initializes a struct mm_walk but didn't
initialize mm_walk.pud_entry.  (Found by code inspection) Use a C
structure initialization to make sure it is set to NULL.

Link: http://lkml.kernel.org/r/20190719233225.12243-1-rcampbell@nvidia.com
Fixes: 8763cb45ab967 ("mm/migrate: new memory migration helper for use with device memory")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: at91: fix clk_offset for sama5d2

[ Upstream commit b1ac6704493fa14b5dc19eb6b69a73932361a131 ]

In SAMA5D2 datasheet, TWIHS_CWGR register rescription mentions clock
offset of 3 cycles (compared to 4 in eg. SAMA5D3).

Cc: stable@vger.kernel.org # 5.2.x
[needs applying to i2c-at91.c instead for earlier kernels]
Fixes: 0ef6f3213dac ("i2c: at91: add support for new alternative command mode")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: at91: disable TXRDY interrupt after sending data

[ Upstream commit d12e3aae160fb26b534c4496b211d6e60a5179ed ]

Driver was not disabling TXRDY interrupt after last TX byte.
This caused interrupt storm until transfer timeouts for slow
or broken device on the bus. The patch fixes the interrupt storm
on my SAMA5D2-based board.

Cc: stable@vger.kernel.org # 5.2.x
[v5.2 introduced file split; the patch should apply to i2c-at91.c before the split]
Fixes: fac368a04048 ("i2c: at91: add new driver")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Tested-by: Raag Jadav <raagjadav@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: don't WARN() on NULL descs if gpiolib is disabled

[ Upstream commit ffe0bbabb0cffceceae07484fde1ec2a63b1537c ]

If gpiolib is disabled, we use the inline stubs from gpio/consumer.h
instead of regular definitions of GPIO API. The stubs for 'optional'
variants of gpiod_get routines return NULL in this case as if the
relevant GPIO wasn't found. This is correct so far.

Calling other (non-gpio_get) stubs from this header triggers a warning
because the GPIO descriptor couldn't have been requested. The warning
however is unconditional (WARN_ON(1)) and is emitted even if the passed
descriptor pointer is NULL.

We don't want to force the users of 'optional' gpio_get to check the
returned pointer before calling e.g. gpiod_set_value() so let's only
WARN on non-NULL descriptors.

Cc: stable@vger.kernel.org
Reported-by: Claus H. Stovgaard <cst@phaseone.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/iova: Remove stale cached32_node

[ Upstream commit 9eed17d37c77171cf5ffb95c4257f87df3cd4c8f ]

Since the cached32_node is allowed to be advanced above dma_32bit_pfn
(to provide a shortcut into the limited range), we need to be careful to
remove the to be freed node if it is the cached32_node.

[   48.477773] BUG: KASAN: use-after-free in __cached_rbnode_delete_update+0x68/0x110
[   48.477812] Read of size 8 at addr ffff88870fc19020 by task kworker/u8:1/37
[   48.477843]
[   48.477879] CPU: 1 PID: 37 Comm: kworker/u8:1 Tainted: G     U            5.2.0+ #735
[   48.477915] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[   48.478047] Workqueue: i915 __i915_gem_free_work [i915]
[   48.478075] Call Trace:
[   48.478111]  dump_stack+0x5b/0x90
[   48.478137]  print_address_description+0x67/0x237
[   48.478178]  ? __cached_rbnode_delete_update+0x68/0x110
[   48.478212]  __kasan_report.cold.3+0x1c/0x38
[   48.478240]  ? __cached_rbnode_delete_update+0x68/0x110
[   48.478280]  ? __cached_rbnode_delete_update+0x68/0x110
[   48.478308]  __cached_rbnode_delete_update+0x68/0x110
[   48.478344]  private_free_iova+0x2b/0x60
[   48.478378]  iova_magazine_free_pfns+0x46/0xa0
[   48.478403]  free_iova_fast+0x277/0x340
[   48.478443]  fq_ring_free+0x15a/0x1a0
[   48.478473]  queue_iova+0x19c/0x1f0
[   48.478597]  cleanup_page_dma.isra.64+0x62/0xb0 [i915]
[   48.478712]  __gen8_ppgtt_cleanup+0x63/0x80 [i915]
[   48.478826]  __gen8_ppgtt_cleanup+0x42/0x80 [i915]
[   48.478940]  __gen8_ppgtt_clear+0x433/0x4b0 [i915]
[   48.479053]  __gen8_ppgtt_clear+0x462/0x4b0 [i915]
[   48.479081]  ? __sg_free_table+0x9e/0xf0
[   48.479116]  ? kfree+0x7f/0x150
[   48.479234]  i915_vma_unbind+0x1e2/0x240 [i915]
[   48.479352]  i915_vma_destroy+0x3a/0x280 [i915]
[   48.479465]  __i915_gem_free_objects+0xf0/0x2d0 [i915]
[   48.479579]  __i915_gem_free_work+0x41/0xa0 [i915]
[   48.479607]  process_one_work+0x495/0x710
[   48.479642]  worker_thread+0x4c7/0x6f0
[   48.479687]  ? process_one_work+0x710/0x710
[   48.479724]  kthread+0x1b2/0x1d0
[   48.479774]  ? kthread_create_worker_on_cpu+0xa0/0xa0
[   48.479820]  ret_from_fork+0x1f/0x30
[   48.479864]
[   48.479907] Allocated by task 631:
[   48.479944]  save_stack+0x19/0x80
[   48.479994]  __kasan_kmalloc.constprop.6+0xc1/0xd0
[   48.480038]  kmem_cache_alloc+0x91/0xf0
[   48.480082]  alloc_iova+0x2b/0x1e0
[   48.480125]  alloc_iova_fast+0x58/0x376
[   48.480166]  intel_alloc_iova+0x90/0xc0
[   48.480214]  intel_map_sg+0xde/0x1f0
[   48.480343]  i915_gem_gtt_prepare_pages+0xb8/0x170 [i915]
[   48.480465]  huge_get_pages+0x232/0x2b0 [i915]
[   48.480590]  ____i915_gem_object_get_pages+0x40/0xb0 [i915]
[   48.480712]  __i915_gem_object_get_pages+0x90/0xa0 [i915]
[   48.480834]  i915_gem_object_prepare_write+0x2d6/0x330 [i915]
[   48.480955]  create_test_object.isra.54+0x1a9/0x3e0 [i915]
[   48.481075]  igt_shared_ctx_exec+0x365/0x3c0 [i915]
[   48.481210]  __i915_subtests.cold.4+0x30/0x92 [i915]
[   48.481341]  __run_selftests.cold.3+0xa9/0x119 [i915]
[   48.481466]  i915_live_selftests+0x3c/0x70 [i915]
[   48.481583]  i915_pci_probe+0xe7/0x220 [i915]
[   48.481620]  pci_device_probe+0xe0/0x180
[   48.481665]  really_probe+0x163/0x4e0
[   48.481710]  device_driver_attach+0x85/0x90
[   48.481750]  __driver_attach+0xa5/0x180
[   48.481796]  bus_for_each_dev+0xda/0x130
[   48.481831]  bus_add_driver+0x205/0x2e0
[   48.481882]  driver_register+0xca/0x140
[   48.481927]  do_one_initcall+0x6c/0x1af
[   48.481970]  do_init_module+0x106/0x350
[   48.482010]  load_module+0x3d2c/0x3ea0
[   48.482058]  __do_sys_finit_module+0x110/0x180
[   48.482102]  do_syscall_64+0x62/0x1f0
[   48.482147]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   48.482190]
[   48.482224] Freed by task 37:
[   48.482273]  save_stack+0x19/0x80
[   48.482318]  __kasan_slab_free+0x12e/0x180
[   48.482363]  kmem_cache_free+0x70/0x140
[   48.482406]  __free_iova+0x1d/0x30
[   48.482445]  fq_ring_free+0x15a/0x1a0
[   48.482490]  queue_iova+0x19c/0x1f0
[   48.482624]  cleanup_page_dma.isra.64+0x62/0xb0 [i915]
[   48.482749]  __gen8_ppgtt_cleanup+0x63/0x80 [i915]
[   48.482873]  __gen8_ppgtt_cleanup+0x42/0x80 [i915]
[   48.482999]  __gen8_ppgtt_clear+0x433/0x4b0 [i915]
[   48.483123]  __gen8_ppgtt_clear+0x462/0x4b0 [i915]
[   48.483250]  i915_vma_unbind+0x1e2/0x240 [i915]
[   48.483378]  i915_vma_destroy+0x3a/0x280 [i915]
[   48.483500]  __i915_gem_free_objects+0xf0/0x2d0 [i915]
[   48.483622]  __i915_gem_free_work+0x41/0xa0 [i915]
[   48.483659]  process_one_work+0x495/0x710
[   48.483704]  worker_thread+0x4c7/0x6f0
[   48.483748]  kthread+0x1b2/0x1d0
[   48.483787]  ret_from_fork+0x1f/0x30
[   48.483831]
[   48.483868] The buggy address belongs to the object at ffff88870fc19000
[   48.483868]  which belongs to the cache iommu_iova of size 40
[   48.483920] The buggy address is located 32 bytes inside of
[   48.483920]  40-byte region [ffff88870fc19000, ffff88870fc19028)
[   48.483964] The buggy address belongs to the page:
[   48.484006] page:ffffea001c3f0600 refcount:1 mapcount:0 mapping:ffff8888181a91c0 index:0x0 compound_mapcount: 0
[   48.484045] flags: 0x8000000000010200(slab|head)
[   48.484096] raw: 8000000000010200 ffffea001c421a08 ffffea001c447e88 ffff8888181a91c0
[   48.484141] raw: 0000000000000000 0000000000120012 00000001ffffffff 0000000000000000
[   48.484188] page dumped because: kasan: bad access detected
[   48.484230]
[   48.484265] Memory state around the buggy address:
[   48.484314]  ffff88870fc18f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   48.484361]  ffff88870fc18f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   48.484406] >ffff88870fc19000: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
[   48.484451]                                ^
[   48.484494]  ffff88870fc19080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   48.484530]  ffff88870fc19100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108602
Fixes: e60aa7b53845 ("iommu/iova: Extend rbtree node caching")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: <stable@vger.kernel.org> # v4.15+
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/mm: Limit rma_size to 1TB when running without HV mode

[ Upstream commit da0ef93310e67ae6902efded60b6724dab27a5d1 ]

The virtual real mode addressing (VRMA) mechanism is used when a
partition is using HPT (Hash Page Table) translation and performs real
mode accesses (MSR[IR|DR] = 0) in non-hypervisor mode. In this mode
effective address bits 0:23 are treated as zero (i.e. the access is
aliased to 0) and the access is performed using an implicit 1TB SLB
entry.

The size of the RMA (Real Memory Area) is communicated to the guest as
the size of the first memory region in the device tree. And because of
the mechanism described above can be expected to not exceed 1TB. In
the event that the host erroneously represents the RMA as being larger
than 1TB, guest accesses in real mode to memory addresses above 1TB
will be aliased down to below 1TB. This means that a memory access
performed in real mode may differ to one performed in virtual mode for
the same memory address, which would likely have unintended
consequences.

To avoid this outcome have the guest explicitly limit the size of the
RMA to the current maximum, which is 1TB. This means that even if the
first memory block is larger than 1TB, only the first 1TB should be
accessed in real mode.

Fixes: c610d65c0ad0 ("powerpc/pseries: lift RTAS limit for hash")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190710052018.14628-1-sjitindarsingh@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips

[ Upstream commit 2756d9143aa517b97961e85412882b8ce31371a6 ]

It turned out that the recent Intel HD-audio controller chips show a
significant stall during the system PM resume intermittently.  It
doesn't happen so often and usually it may read back successfully
after one or more seconds, but in some rare worst cases the driver
went into fallback mode.

After trial-and-error, we found out that the communication stall seems
covered by issuing the sync after each verb write, as already done for
AMD and other chipsets.  So this patch enables the write-sync flag for
the recent Intel chips, Skylake and onward, as a workaround.

Also, since Broxton and co have the very same driver flags as Skylake,
refer to the Skylake driver flags instead of defining the same
contents again for simplification.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201901
Reported-and-tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: Add support for Armadeus ST0700 Adapt

[ Upstream commit c479450f61c7f1f248c9a54aedacd2a6ca521ff8 ]

This patch adds support for the Armadeus ST0700 Adapt. It comes with a
Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so
that it can be connected on the TFT header of Armadeus Dev boards.

Cc: stable@vger.kernel.org # v4.19
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190507152713.27494-1-sebastien.szymanski@armadeus.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm thin metadata: check if in fail_io mode when setting needs_check

[ Upstream commit 54fa16ee532705985e6c946da455856f18f63ee1 ]

Check if in fail_io mode at start of dm_pool_metadata_set_needs_check().
Otherwise dm_pool_metadata_set_needs_check()'s superblock_lock() can
crash in dm_bm_write_lock() while accessing the block manager object
that was previously destroyed as part of a failed
dm_pool_abort_metadata() that ultimately set fail_io to begin with.

Also, update DMERR() message to more accurately describe
superblock_lock() failure.

Cc: stable@vger.kernel.org
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pstore: Fix double-free in pstore_mkfile() failure path

[ Upstream commit 4c6d80e1144bdf48cae6b602ae30d41f3e5c76a9 ]

The pstore_mkfile() function is passed a pointer to a struct
pstore_record. On success it consumes this 'record' pointer and
references it from the created inode.

On failure, however, it may or may not free the record. There are even
two different code paths which return -ENOMEM -- one of which does and
the other doesn't free the record.

Make the behaviour deterministic by never consuming and freeing the
record when returning failure, allowing the caller to do the cleanup
consistently.

Signed-off-by: Norbert Manthey <nmanthey@amazon.de>
Link: https://lore.kernel.org/r/1562331960-26198-1-git-send-email-nmanthey@amazon.de
Fixes: 83f70f0769ddd ("pstore: Do not duplicate record metadata")
Fixes: 1dfff7dd67d1a ("pstore: Pass record contents instead of copying")
Cc: stable@vger.kernel.org
[kees: also move "private" allocation location, rename inode cleanup label]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

resource: fix locking in find_next_iomem_res()

[ Upstream commit 49f17c26c123b60fd1c74629eef077740d16ffc2 ]

Since resources can be removed, locking should ensure that the resource
is not removed while accessing it.  However, find_next_iomem_res() does
not hold the lock while copying the data of the resource.

Keep holding the lock while the data is copied.  While at it, change the
return value to a more informative value.  It is disregarded by the
callers.

[akpm@linux-foundation.org: fix find_next_iomem_res() documentation]
Link: http://lkml.kernel.org/r/20190613045903.4922-2-namit@vmware.com
Fixes: ff3cc952d3f00 ("resource: Add remove_resource interface")
Signed-off-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

resource: Fix find_next_iomem_res() iteration issue

[ Upstream commit 010a93bf97c72f43aac664d0a685942f83d1a103 ]

Previously find_next_iomem_res() used "*res" as both an input parameter for
the range to search and the type of resource to search for, and an output
parameter for the resource we found, which makes the interface confusing.

The current callers use find_next_iomem_res() incorrectly because they
allocate a single struct resource and use it for repeated calls to
find_next_iomem_res().  When find_next_iomem_res() returns a resource, it
overwrites the start, end, flags, and desc members of the struct.  If we
call find_next_iomem_res() again, we must update or restore these fields.
The previous code restored res.start and res.end, but not res.flags or
res.desc.

Since the callers did not restore res.flags, if they searched for flags
IORESOURCE_MEM | IORESOURCE_BUSY and found a resource with flags
IORESOURCE_MEM | IORESOURCE_BUSY | IORESOURCE_SYSRAM, the next search would
incorrectly skip resources unless they were also marked as
IORESOURCE_SYSRAM.

Fix this by restructuring the interface so it takes explicit "start, end,
flags" parameters and uses "*res" only as an output parameter.

Based on a patch by Lianbo Jiang <lijiang@redhat.com>.

 [ bp: While at it:
   - make comments kernel-doc style.
   -

Originally-by: http://lore.kernel.org/lkml/20180921073211.20097-2-lijiang@redhat.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Brijesh Singh <brijesh.singh@amd.com>
CC: Dan Williams <dan.j.williams@intel.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Lianbo Jiang <lijiang@redhat.com>
CC: Takashi Iwai <tiwai@suse.de>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Tom Lendacky <thomas.lendacky@amd.com>
CC: Vivek Goyal <vgoyal@redhat.com>
CC: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
CC: bhe@redhat.com
CC: dan.j.williams@intel.com
CC: dyoung@redhat.com
CC: kexec@lists.infradead.org
CC: mingo@redhat.com
CC: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/153805812916.1157.177580438135143788.stgit@bhelgaas-glaptop.roam.corp.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

resource: Include resource end in walk_*() interfaces

[ Upstream commit a98959fdbda1849a01b2150bb635ed559ec06700 ]

find_next_iomem_res() finds an iomem resource that covers part of a range
described by "start, end".  All callers expect that range to be inclusive,
i.e., both start and end are included, but find_next_iomem_res() doesn't
handle the end address correctly.

If it finds an iomem resource that contains exactly the end address, it
skips it, e.g., if "start, end" is [0x0-0x10000] and there happens to be an
iomem resource [mem 0x10000-0x10000] (the single byte at 0x10000), we skip
it:

  find_next_iomem_res(...)
  {
    start = 0x0;
    end = 0x10000;
    for (p = next_resource(...)) {
      # p->start = 0x10000;
      # p->end = 0x10000;
      # we *should* return this resource, but this condition is false:
      if ((p->end >= start) && (p->start < end))
        break;

Adjust find_next_iomem_res() so it allows a resource that includes the
single byte at the end of the range.  This is a corner case that we
probably don't see in practice.

Fixes: 58c1b5b07907 ("[PATCH] memory hotadd fixes: find_next_system_ram catch range fix")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Brijesh Singh <brijesh.singh@amd.com>
CC: Dan Williams <dan.j.williams@intel.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Lianbo Jiang <lijiang@redhat.com>
CC: Takashi Iwai <tiwai@suse.de>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Tom Lendacky <thomas.lendacky@amd.com>
CC: Vivek Goyal <vgoyal@redhat.com>
CC: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
CC: bhe@redhat.com
CC: dan.j.williams@intel.com
CC: dyoung@redhat.com
CC: kexec@lists.infradead.org
CC: mingo@redhat.com
CC: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/153805812254.1157.16736368485811773752.stgit@bhelgaas-glaptop.roam.corp.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: correctly validate compression type

[ Upstream commit aa53e3bfac7205fb3a8815ac1c937fd6ed01b41e ]

Nikolay reported the following KASAN splat when running btrfs/048:

[ 1843.470920] ==================================================================
[ 1843.471971] BUG: KASAN: slab-out-of-bounds in strncmp+0x66/0xb0
[ 1843.472775] Read of size 1 at addr ffff888111e369e2 by task btrfs/3979

[ 1843.473904] CPU: 3 PID: 3979 Comm: btrfs Not tainted 5.2.0-rc3-default #536
[ 1843.475009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1843.476322] Call Trace:
[ 1843.476674]  dump_stack+0x7c/0xbb
[ 1843.477132]  ? strncmp+0x66/0xb0
[ 1843.477587]  print_address_description+0x114/0x320
[ 1843.478256]  ? strncmp+0x66/0xb0
[ 1843.478740]  ? strncmp+0x66/0xb0
[ 1843.479185]  __kasan_report+0x14e/0x192
[ 1843.479759]  ? strncmp+0x66/0xb0
[ 1843.480209]  kasan_report+0xe/0x20
[ 1843.480679]  strncmp+0x66/0xb0
[ 1843.481105]  prop_compression_validate+0x24/0x70
[ 1843.481798]  btrfs_xattr_handler_set_prop+0x65/0x160
[ 1843.482509]  __vfs_setxattr+0x71/0x90
[ 1843.483012]  __vfs_setxattr_noperm+0x84/0x130
[ 1843.483606]  vfs_setxattr+0xac/0xb0
[ 1843.484085]  setxattr+0x18c/0x230
[ 1843.484546]  ? vfs_setxattr+0xb0/0xb0
[ 1843.485048]  ? __mod_node_page_state+0x1f/0xa0
[ 1843.485672]  ? _raw_spin_unlock+0x24/0x40
[ 1843.486233]  ? __handle_mm_fault+0x988/0x1290
[ 1843.486823]  ? lock_acquire+0xb4/0x1e0
[ 1843.487330]  ? lock_acquire+0xb4/0x1e0
[ 1843.487842]  ? mnt_want_write_file+0x3c/0x80
[ 1843.488442]  ? debug_lockdep_rcu_enabled+0x22/0x40
[ 1843.489089]  ? rcu_sync_lockdep_assert+0xe/0x70
[ 1843.489707]  ? __sb_start_write+0x158/0x200
[ 1843.490278]  ? mnt_want_write_file+0x3c/0x80
[ 1843.490855]  ? __mnt_want_write+0x98/0xe0
[ 1843.491397]  __x64_sys_fsetxattr+0xba/0xe0
[ 1843.492201]  ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 1843.493201]  do_syscall_64+0x6c/0x230
[ 1843.493988]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1843.495041] RIP: 0033:0x7fa7a8a7707a
[ 1843.495819] Code: 48 8b 0d 21 de 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 be 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ee dd 2b 00 f7 d8 64 89 01 48
[ 1843.499203] RSP: 002b:00007ffcb73bca38 EFLAGS: 00000202 ORIG_RAX: 00000000000000be
[ 1843.500210] RAX: ffffffffffffffda RBX: 00007ffcb73bda9d RCX: 00007fa7a8a7707a
[ 1843.501170] RDX: 00007ffcb73bda9d RSI: 00000000006dc050 RDI: 0000000000000003
[ 1843.502152] RBP: 00000000006dc050 R08: 0000000000000000 R09: 0000000000000000
[ 1843.503109] R10: 0000000000000002 R11: 0000000000000202 R12: 00007ffcb73bda91
[ 1843.504055] R13: 0000000000000003 R14: 00007ffcb73bda82 R15: ffffffffffffffff

[ 1843.505268] Allocated by task 3979:
[ 1843.505771]  save_stack+0x19/0x80
[ 1843.506211]  __kasan_kmalloc.constprop.5+0xa0/0xd0
[ 1843.506836]  setxattr+0xeb/0x230
[ 1843.507264]  __x64_sys_fsetxattr+0xba/0xe0
[ 1843.507886]  do_syscall_64+0x6c/0x230
[ 1843.508429]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

[ 1843.509558] Freed by task 0:
[ 1843.510188] (stack is not available)

[ 1843.511309] The buggy address belongs to the object at ffff888111e369e0
                which belongs to the cache kmalloc-8 of size 8
[ 1843.514095] The buggy address is located 2 bytes inside of
                8-byte region [ffff888111e369e0, ffff888111e369e8)
[ 1843.516524] The buggy address belongs to the page:
[ 1843.517561] page:ffff88813f478d80 refcount:1 mapcount:0 mapping:ffff88811940c300 index:0xffff888111e373b8 compound_mapcount: 0
[ 1843.519993] flags: 0x4404000010200(slab|head)
[ 1843.520951] raw: 0004404000010200 ffff88813f48b008 ffff888119403d50 ffff88811940c300
[ 1843.522616] raw: ffff888111e373b8 000000000016000f 00000001ffffffff 0000000000000000
[ 1843.524281] page dumped because: kasan: bad access detected

[ 1843.525936] Memory state around the buggy address:
[ 1843.526975]  ffff888111e36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.528479]  ffff888111e36900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.530138] >ffff888111e36980: fc fc fc fc fc fc fc fc fc fc fc fc 02 fc fc fc
[ 1843.531877]                                                        ^
[ 1843.533287]  ffff888111e36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.534874]  ffff888111e36a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.536468] ==================================================================

This is caused by supplying a too short compression value ('lz') in the
test-case and comparing it to 'lzo' with strncmp() and a length of 3.
strncmp() read past the 'lz' when looking for the 'o' and thus caused an
out-of-bounds read.

Introduce a new check 'btrfs_compress_is_valid_type()' which not only
checks the user-supplied value against known compression types, but also
employs checks for too short values.

Reported-by: Nikolay Borisov <nborisov@suse.com>
Fixes: 272e5326c783 ("btrfs: prop: fix vanished compression property after failed set")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/srp: Accept again source addresses that do not have a port number

[ Upstream commit bcef5b7215681250c4bf8961dfe15e9e4fef97d0 ]

The function srp_parse_in() is used both for parsing source address
specifications and for target address specifications. Target addresses
must have a port number. Having to specify a port number for source
addresses is inconvenient. Make sure that srp_parse_in() supports again
parsing addresses with no port number.

Cc: <stable@vger.kernel.org>
Fixes: c62adb7def71 ("IB/srp: Fix IPv6 address parsing")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/srp: Document srp_parse_in() arguments

[ Upstream commit e37df2d5b569390e3b80ebed9a73fd5b9dcda010 ]

This patch avoids that a warning is reported when building with W=1.

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: gemini: Set DIR-685 SPI CS as active low

[ Upstream commit f90b8fda3a9d72a9422ea80ae95843697f94ea4a ]

The SPI to the display on the DIR-685 is active low, we were
just saved by the SPI library enforcing active low on everything
before, so set it as active low to avoid ambiguity.

Link: https://lore.kernel.org/r/20190715202101.16060-1-linus.walleij@linaro.org
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Book3S HV: Fix CR0 setting in TM emulation

[ Upstream commit 3fefd1cd95df04da67c83c1cb93b663f04b3324f ]

When emulating tsr, treclaim and trechkpt, we incorrectly set CR0. The
code currently sets:
    CR0 <- 00 || MSR[TS]
but according to the ISA it should be:
    CR0 <-  0 || MSR[TS] || 0

This fixes the bit shift to put the bits in the correct location.

This is a data integrity issue as CR0 is corrupted.

Fixes: 4bb3c7a0208f ("KVM: PPC: Book3S HV: Work around transactional memory bugs in POWER9")
Cc: stable@vger.kernel.org # v4.17+
Tested-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Use ccr field in pt_regs struct embedded in vcpu struct

[ Upstream commit fd0944baad806dfb4c777124ec712c55b714ff51 ]

When the 'regs' field was added to struct kvm_vcpu_arch, the code
was changed to use several of the fields inside regs (e.g., gpr, lr,
etc.) but not the ccr field, because the ccr field in struct pt_regs
is 64 bits on 64-bit platforms, but the cr field in kvm_vcpu_arch is
only 32 bits.  This changes the code to use the regs.ccr field
instead of cr, and changes the assembly code on 64-bit platforms to
use 64-bit loads and stores instead of 32-bit ones.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: VMX: check CPUID before allowing read/write of IA32_XSS

[ Upstream commit 4d763b168e9c5c366b05812c7bba7662e5ea3669 ]

Raise #GP when guest read/write IA32_XSS, but the CPUID bits
say that it shouldn't exist.

Fixes: 203000993de5 (kvm: vmx: add MSR logic for XSAVES)
Reported-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Reported-by: Tao Xu <tao3.xu@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: VMX: Fix handling of #MC that occurs during VM-Entry

[ Upstream commit beb8d93b3e423043e079ef3dda19dad7b28467a8 ]

A previous fix to prevent KVM from consuming stale VMCS state after a
failed VM-Entry inadvertantly blocked KVM's handling of machine checks
that occur during VM-Entry.

Per Intel's SDM, a #MC during VM-Entry is handled in one of three ways,
depending on when the #MC is recognoized.  As it pertains to this bug
fix, the third case explicitly states EXIT_REASON_MCE_DURING_VMENTRY
is handled like any other VM-Exit during VM-Entry, i.e. sets bit 31 to
indicate the VM-Entry failed.

If a machine-check event occurs during a VM entry, one of the following occurs:
 - The machine-check event is handled as if it occurred before the VM entry:
        ...
 - The machine-check event is handled after VM entry completes:
        ...
 - A VM-entry failure occurs as described in Section 26.7. The basic
   exit reason is 41, for "VM-entry failure due to machine-check event".

Explicitly handle EXIT_REASON_MCE_DURING_VMENTRY as a one-off case in
vmx_vcpu_run() instead of binning it into vmx_complete_atomic_exit().
Doing so allows vmx_vcpu_run() to handle VMX_EXIT_REASONS_FAILED_VMENTRY
in a sane fashion and also simplifies vmx_complete_atomic_exit() since
VMCS.VM_EXIT_INTR_INFO is guaranteed to be fresh.

Fixes: b060ca3b2e9e7 ("kvm: vmx: Handle VMLAUNCH/VMRESUME failure properly")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: VMX: Always signal #GP on WRMSR to MSR_IA32_CR_PAT with bad value

[ Upstream commit d28f4290b53a157191ed9991ad05dffe9e8c0c89 ]

The behavior of WRMSR is in no way dependent on whether or not KVM
consumes the value.

Fixes: 4566654bb9be9 ("KVM: vmx: Inject #GP on invalid PAT CR")
Cc: stable@vger.kernel.org
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86: optimize check for valid PAT value

[ Upstream commit 674ea351cdeb01d2740edce31db7f2d79ce6095d ]

This check will soon be done on every nested vmentry and vmexit,
"parallelize" it using bitwise operations.

Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: use ceph_evict_inode to cleanup inode's resource

[ Upstream commit 87bc5b895d94a0f40fe170d4cf5771c8e8f85d15 ]

remove_session_caps() relies on __wait_on_freeing_inode(), to wait for
freeing inode to remove its caps. But VFS wakes freeing inode waiters
before calling destroy_inode().

Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/40102
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda - Don't resume forcibly i915 HDMI/DP codec

[ Upstream commit 4914da2fb0c89205790503f20dfdde854f3afdd8 ]

We apply the codec resume forcibly at system resume callback for
updating and syncing the jack detection state that may have changed
during sleeping.  This is, however, superfluous for the codec like
Intel HDMI/DP, where the jack detection is managed via the audio
component notification; i.e. the jack state change shall be reported
sooner or later from the graphics side at mode change.

This patch changes the codec resume callback to avoid the forcible
resume conditionally with a new flag, codec->relaxed_resume, for
reducing the resume time.  The flag is set in the codec probe.

Although this doesn't fix the entire bug mentioned in the bugzilla
entry below, it's still a good optimization and some improvements are
seen.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201901
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Properly handle auto disabling of serverino option

[ Upstream commit 29fbeb7a908a60a5ae8c50fbe171cb8fdcef1980 ]

Fix mount options comparison when serverino option is turned off later
in cifs_autodisable_serverino() and thus avoiding mismatch of new cifs
mounts.

Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilove@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: zfcp: fix request object use-after-free in send path causing wrong traces

[ Upstream commit 106d45f350c7cac876844dc685845cba4ffdb70b ]

When tracing instances where we open and close WKA ports, we also pass the
request-ID of the respective FSF command.

But after successfully sending the FSF command we must not use the
request-object anymore, as this might result in an use-after-free (see
"zfcp: fix request object use-after-free in send path causing seqno
errors" ).

To fix this add a new variable that caches the request-ID before sending
the request. This won't change during the hand-off to the FCP channel,
and so it's safe to trace this cached request-ID later, instead of using
the request object.

Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Fixes: d27a7cb91960 ("zfcp: trace on request for open and close of WKA port")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: wilc1000: fix error path cleanup in wilc_wlan_initialize()

[ Upstream commit 6419f818ababebc1116fb2d0e220bd4fe835d0e3 ]

For the error path in wilc_wlan_initialize(), the resources are not
cleanup in the correct order. Reverted the previous changes and use the
correct order to free during error condition.

Fixes: b46d68825c2d ("staging: wilc1000: remove COMPLEMENT_BOOT")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target/iblock: Fix overrun in WRITE SAME emulation

[ Upstream commit 5676234f20fef02f6ca9bd66c63a8860fce62645 ]

WRITE SAME corrupts data on the block device behind iblock if the command
is emulated. The emulation code issues (M - 1) * N times more bios than
requested, where M is the number of 512 blocks per real block size and N is
the NUMBER OF LOGICAL BLOCKS specified in WRITE SAME command. So, for a
device with 4k blocks, 7 * N more LBAs gets written after the requested
range.

The issue happens because the number of 512 byte sectors to be written is
decreased one by one while the real bios are typically from 1 to 8 512 byte
sectors per bio.

Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6")
Cc: <stable@vger.kernel.org>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target/core: Use the SECTOR_SHIFT constant

[ Upstream commit 80b045b385cfef10939c913fbfeb19ce5491c1f2 ]

Instead of duplicating the SECTOR_SHIFT definition from <linux/blkdev.h>,
use it. This patch does not change any functionality.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: reset pos on failure to unpack for various functions

[ Upstream commit 156e42996bd84eccb6acf319f19ce0cb140d00e3 ]

Each function that manipulates the aa_ext struct should reset it's "pos"
member on failure. This ensures that, on failure, no changes are made to
the state of the aa_ext struct.

There are paths were elements are optional and the error path is
used to indicate the optional element is not present. This means
instead of just aborting on error the unpack stream can become
unsynchronized on optional elements, if using one of the affected
functions.

Cc: stable@vger.kernel.org
Fixes: 736ec752d95e ("AppArmor: policy routines for loading and unpacking policy")
Signed-off-by: Mike Salvatore <mike.salvatore@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Avoid hardlockup with flushlist_lock

[ Upstream commit cf131a81967583ae737df6383a0893b9fee75b4e ]

Heavy contention of the sde flushlist_lock can cause hard lockups at
extreme scale when the flushing logic is under stress.

Mitigate by replacing the item at a time copy to the local list with
an O(1) list_splice_init() and using the high priority work queue to
do the flushes.

Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Cc: <stable@vger.kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>