Qiang Li [Thu, 17 Jan 2019 05:47:23 +0000 (13:47 +0800)]
emmc: change the g12a portc emmc hardware reset pin. [1/1]
PD#SWPL-4276
Problem:
g12a portc emmc hardware reset pin is error.
Solution:
change the g12a portc emmc hardware reset pin.
Verify:
g12a_u200
Change-Id: Ifd3be5ae9f19eae9241b21faeceffc07aa70ce86
Signed-off-by: Qiang Li <qiang.li@amlogic.com>
Qiang Li [Thu, 17 Jan 2019 06:19:32 +0000 (14:19 +0800)]
emmc: change the tl1 portc emmc hardware reset pin. [1/1]
PD#SWPL-4276
Problem:
Tl1 portc emmc hardware reset pin is error.
Solution:
change the tl1 portc emmc hardware reset pin.
Verify:
X301_T962X2
Change-Id: I133d35a62002410866fe535ca2016b63878392fd
Signed-off-by: Qiang Li <qiang.li@amlogic.com>
nengwen.chen [Mon, 25 Feb 2019 02:26:58 +0000 (10:26 +0800)]
atv_demod: Tuner crashes easily when fast finetune [1/1]
PD#SWPL-4421
Problem:
Tuner crashes easily when fast fine tune
Solution:
Delay afc work to prevent tuner crash
Verify:
verified by x301
Change-Id: I011f7c3f71a30f95a9b7aa371d5fabe71f249051
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
nengwen.chen [Mon, 25 Feb 2019 02:10:27 +0000 (10:10 +0800)]
atv_demod: Add audio carrier offset detect [1/1]
PD#TV-2564
Problem:
Torture room teset report SND0810 sound carrier deviation
Solution:
Add audio carrier offset detect
Verify:
verified by x301
Change-Id: I2d715891fb268452f95e05f998864e9b7321ff38
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Yong Qin [Wed, 30 Jan 2019 06:45:25 +0000 (14:45 +0800)]
vlock: add phase lock function [1/1]
PD#SWPL-3644
Problem:
new feature on tl1
Solution:
add function
Verify:
verified on tl1 android p
Change-Id: I964054512f59a98f03d20df11b8c63d6802744d5
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Kaifu Hu [Thu, 20 Dec 2018 05:20:53 +0000 (13:20 +0800)]
dv: dolby vision support on t962x [1/1]
PD#SWPL-3318
Problem:
Android P not support dolby vision on t962x
Solution:
Porting code support dolby vision
Verify:
t962x/r311
Change-Id: I85afd05d2cb21a7105ea345f07e7e581bba5e927
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Shunzhou Jiang [Fri, 1 Feb 2019 01:45:46 +0000 (09:45 +0800)]
clk: g12a/g12b: update pcie clk parameter for jitter [1/1]
PD#SWPL-4745
Problem:
update pcie parameter for jitter
Solution:
clear pcie clk parameter
Verify:
test pass on g12a skt/w400
Change-Id: I354d643c412c37fb6c99fc49ac5bd70ab12be008
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Shunzhou Jiang [Thu, 24 Jan 2019 01:46:06 +0000 (09:46 +0800)]
clk: g12a: clear pcie cntl5 for save power [1/1]
PD#SWPL-4583
Problem:
cntl5 caused power increase
Solution:
clear pcie cntl5 when pcie clk disabled
Verify:
test pass on g12a skt
Change-Id: I495590af2ccb81eb5ae90c86008679def8673a70
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Jianxiong Pan [Mon, 25 Feb 2019 08:41:15 +0000 (16:41 +0800)]
dts: fix amlogic-dt-id error in g12b dts. [1/1]
PD#SWPL-5020
Problem:
amlogic-dt-id error in g12b dts.
Solution:
specify amlogic-dt-id by dts name.
Verify:
local test.
Change-Id: I11a737ec61221c2dc9fcd4e3761c380ac5b5044b
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Jianxiong Pan [Fri, 15 Feb 2019 12:07:42 +0000 (20:07 +0800)]
printk: fix print_time bug when run dmesg [1/1]
PD#SWPL-4900
Problem:
printk_prefix() passes NULL buf to print_time() to get the length of
the time prefix; when printk times are enable, the current code just
return "snprint(NULL, 0, "[%5lu.000000]", (unsigned long)ts)"
but in the SMP case, we add cpu core id at the end of time prefix, the
format is "[%5lu, %06lu@%d]", this gives a wrong size(shorter).
this will make buf get out of boundary, when run dmesg.
Solution:
replace [%5lu.000000] with [%5lu.000000@0]
Verify:
g12a-u200
Change-Id: Ic74b9f466b5af5aac7e6569a1afc7a46d9594050
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
yujie.wu [Fri, 22 Feb 2019 05:47:22 +0000 (13:47 +0800)]
audio: Add binv setting [1/2]
PD#SWPL-4733
Problem:
The Speaker has noise
Solution:
The binv is not correct for TDM out c,
we will use amixer to set it
Verify:
A113
Change-Id: I7c8af8e00e3c8834533347947630a6944b7e2136
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
yujie.wu [Wed, 20 Feb 2019 06:43:10 +0000 (14:43 +0800)]
audio: Fix Linein Not work [2/2]
PD#SWPL-4737
Problem:
HDMI in and Line in use the same device.
But their input I2S inskew is not same.
Solution:
We need use separate skew setting for different
source.
Verify:
A113
Change-Id: I8e306af06d9c9d614c4032f2030dbedb64a7f6df
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
changqing.gao [Thu, 21 Feb 2019 09:19:06 +0000 (17:19 +0800)]
mm: The first 1MB mem is wasted for CPU series coming after TXLX [1/1]
PD#SWPL-3744
Problem:
For the previous Amlogic CPU series(before TXLX), the CPU booting vector
locates at physical address starting from 0x00. To avoid influencing cpu
booting procedure, we have to reserve the first 1MB physical memory. But
it has changed since TXLX, the normal text section can safely use 0~1M
physical address. So it's no need to reserve the first 1MB in DTS.
Solution:
Change the starting address of usable memory from 0x100000 to 0x0 for CPU
series coming after TXLX.
Verify:
Locally on W400
Change-Id: I2df7859a38feca48abd58459e8b231ee15ada9e2
Signed-off-by: changqing.gao <changqing.gao@amlogic.com>
Jianxiong Pan [Tue, 19 Feb 2019 06:57:21 +0000 (14:57 +0800)]
dts: fix the warnings when compiling the g12a device tree. [1/1]
PD#SWPL-4967
Problem:
warning when compiling the g12a device tree.
Solution:
fix the warning.
Verify:
locall.
Change-Id: I1f93c788d1914441e48305c04330701bfd718b87
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Jianxiong Pan [Thu, 21 Feb 2019 05:36:09 +0000 (13:36 +0800)]
config: fix compile error for axg-s400. [1/1]
PD#SWPL-5059
Problem:
compile error.
Solution:
add CONFIG_AMLOGIC_VIDEOSYNC which already exist in 64bit config
Verify:
locall.
Change-Id: I6d35b9388bbe1c28110cfce17f00de2a5b72f08e
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Jihong Sui [Mon, 21 Jan 2019 08:52:35 +0000 (16:52 +0800)]
deinterlace: modify suspend function [1/1]
PD#SWPL-4196
Problem:
atv suspend/resume, DI deadlock causing hangup
Solution:
add unreg process and clear timer/tasklet
Verify:
tl1
Change-Id: Id50de8649455f0a2f77ad2fcb585bf233d5c362f
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jianxiong Pan [Tue, 19 Feb 2019 05:01:57 +0000 (13:01 +0800)]
dts: g12b: copy g12b dts [1/1]
PD#SWPL-5020
Problem:
copy g12b dts.
Solution:
copy.
Verify:
local.
Change-Id: Ibd6423bd0cc99e98bf1d6359068f9f0719ad177f
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
yicheng shen [Thu, 21 Feb 2019 12:01:13 +0000 (07:01 -0500)]
hdmirx: fix it_content info error issue [1/1]
PD#SWPL-4981
Problem:
it_content info is not correct
Solution:
optimize the method for getting it content
Verify:
TL1
Change-Id: Ie9202b6496742af6d880ae22f3f8f6154db8629a
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Zongdong Jiao [Fri, 22 Feb 2019 01:53:13 +0000 (09:53 +0800)]
hdmitx: rename HDMI_IEEE_OUI to avoid conflicts [1/1]
PD#SWPL-4705
Problem:
In 61207 patch, the define HDMI_IEEE_OUI is conflicted with the kernel
head file include/linux/hdmi.h
Solution:
rename HDMI_IEEE_OUI
Verify:
GXL/P212
Change-Id: I75a12734e85478f22edf0b48636ed86e60302b58
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Shaochan Liu [Fri, 18 Jan 2019 11:35:36 +0000 (19:35 +0800)]
lcd: add wait for gpio input value support in lcd power step [2/2]
PD#SWPL-3938
Problem:
add wait for gpio input value support in lcd power step
Solution:
add wait for gpio input value support in lcd power step
Verify:
verify by t962x-r311
Change-Id: Ie1c4ec6f9f5d91332b6b20e1d1bd2adde17e547b
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
Shaochan Liu [Wed, 20 Feb 2019 06:55:29 +0000 (14:55 +0800)]
lcd: unify lcd driver frame_rate change function [1/1]
PD#SWPL-4680
Problem:
unify lcd driver frame_rate change function
Solution:
create a unified api(lcd_clk_change) to management the function
Verify:
verify by t962x2-r311
Change-Id: I1ab378aa2556db0636aabe8c20f3b97845b8184f
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
Evoke Zhang [Tue, 22 Jan 2019 10:29:31 +0000 (18:29 +0800)]
lcd: optimize tcon_pll for tl1 [1/1]
PD#SWPL-3493
Problem:
tl1 can imporve tcon_pll performance
Solution:
1.update tcon_pll cntl2 register
2.extend ss_level to 12 level
Verify:
x301
Change-Id: Id10479196529083d2bf5048695a682793a4945ca
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Evoke Zhang [Mon, 11 Feb 2019 09:34:23 +0000 (17:34 +0800)]
lcd: tcon: change axi_mem cma alloc api to avoid memory clear [1/1]
PD#SWPL-4554
Problem:
tcon axi memory will clear when enter kernel
Solution:
change axi_mem cma alloc api
Verify:
t309
Change-Id: Ied6ef9976e503c597818a73109b222868c0f0387
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Nian Jing [Wed, 13 Feb 2019 06:28:18 +0000 (14:28 +0800)]
avin: fix avin detect incorrect report [1/1]
PD#SWPL-4840
Problem:
avin detect compare level setting too high
Solution:
adjust the compare level to 635mv
Verify:
x301
Change-Id: I5246482338b3181d98a3836dcff09a3f33da113e
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Bichao Zheng [Tue, 15 Jan 2019 08:46:00 +0000 (16:46 +0800)]
arm: dts: update vddcpu pwm regulator voltage-table [1/1]
PD#SWPL-4225
Problem:
TL1 hardware update DCDC of vddcpu
Solution:
update vddcpu voltage-table
[old]
voltage range: 1021mv - 721mv step size: 10mv step: 30
[new]
voltage range: 1049mv - 689mv step size: 10mv step: 36
Verify:
test pass on tl1_X301_v1 tl1_skt_v1
Change-Id: I3adea525940737490197566a8c85b5b00c375ed0
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
Bichao Zheng [Wed, 16 Jan 2019 06:21:43 +0000 (14:21 +0800)]
pwm: meson: add relative_duty interface in pwm sysfs [1/1]
PD#SWPL-4225
Problem:
This interface is added to facilitate debugging the voltage-
table in pwm regulator, which can output different percentages
of waveforms in a fixed pwm cycle.
example:
echo 50 100 > sys/class/pwm/pwmchipx/pwmx/relative_duty
output 50% duty pwm
Solution:
add relative_duty interface in pwm sysfs
Verify:
test pass on tl1_X301_v1 tl1_skt_v1
Change-Id: Icd01e681694b81f3790f7cce8c326db02674a48c
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
Che Song [Fri, 22 Feb 2019 03:06:12 +0000 (11:06 +0800)]
audio: fix tas5808 no sound [1/1]
PD#SWPL-3081
Problem:
1,lack suspend/resume function
2,lack reset pin control
Solution:
1,add suspend/resume function
2, add reset pin control
Verify:
962x2
Signed-off-by: Che Song <che.song@amlogic.com>
Change-Id: I1cb920fdba4ad32048518fdad93e3a5a81039dd9
Jiamin Ma [Tue, 19 Feb 2019 10:19:27 +0000 (18:19 +0800)]
debug: fail to show active cpu stacks [1/1]
PD#SWPL-4718
Problem:
Will have "PC=0, LR=0" issue when try to
show active cpu stacks via sysrq
Solution:
Save the addr of current interrupted task's context to the
interrupt stack first, so that we can easily obtain pt_regs
later
Verify:
Locally on Ampere
Change-Id: I1cc5095e0ec356bed90f76cdf9af1b2617ce7834
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Zhongfu Luo [Wed, 30 Jan 2019 05:58:10 +0000 (13:58 +0800)]
defendkey: TL1: support secure upgrade check [4/4]
PD#SWPL-5002
Problem:
TL1 need to support defendkey secure upgrade check
Solution:
1.modify the way of get random
Verify:
TL1 skt board verify pass
Change-Id: I76b29800de787c5e5b18e023d84c1161c9b1643a
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Zhongfu Luo [Wed, 30 Jan 2019 07:16:47 +0000 (15:16 +0800)]
dts: TL1: defendkey: support secure upgrade check [3/4]
PD#SWPL-5002
Problem:
TL1 need to support defendkey secure upgrade check
Solution:
1.add defendkey support in TL1 dts
Verify:
TL1 skt board verify pass
Change-Id: If77408e86f10a25ab2aee29d81550c8dff1a486e
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Zongdong Jiao [Mon, 18 Feb 2019 09:33:22 +0000 (04:33 -0500)]
hdmitx: add auto low latency mode(ALLM) [1/1]
PD#SWPL-4705
Problem:
Lack ALLM function
Solution:
Add ALLM function
Verify:
GXL/P212
If Rx supports ALLM, then
echo 1 > /sys/class/amhdmitx/amhdmitx0/allm_mode
otherwise it will set failed, cat allm_mode and will get 0.
Change-Id: I00233e5a5aac133b405590e7df78c7c4805ed0ef
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Hanjie Lin [Mon, 18 Feb 2019 12:03:16 +0000 (20:03 +0800)]
perf: arm: enable pmuserenr [1/1]
PD#SWPL-4673
Problem:
userspace can't access perf monitor cnt with "mrc ... c9,c13,0"
Solution:
actually userspace should check perf monitor cnt access permissions first
before use, so this is a workround.
enable pmuserenr with "mcr ... c9,c14,0" in several places:
1, perf probe
2, cpu idle (state>0) exit
3, cpu online
4, system resume after suspend
Verify:
u212
Change-Id: Ib09682d1d47545dfef8b088283ddbbf390630d3e
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Guosong Zhou [Tue, 19 Feb 2019 06:43:42 +0000 (01:43 -0500)]
camera: config adapter buffer size from dts [1/2]
PD#SWPL-4934
Problem:
kernel panic when adjust adapter memory size
Solution:
config adapter buffer size from dts
Verify:
verify by w411
Change-Id: Ie66cf57e870e140dd63516672c7f90f7d9ddda72
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
Jiamin Ma [Mon, 18 Feb 2019 08:44:22 +0000 (16:44 +0800)]
license: add missing license header [1/1]
PD#SWPL-4728
Problem:
Missing license header
Solution:
Add correct license header
Verify:
Compling passed
Change-Id: I291a41172f9ecf2cde7f7705e99ecb20567c9c8f
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Hanjie Lin [Tue, 19 Feb 2019 05:42:16 +0000 (13:42 +0800)]
perf: fix sys_cpu_status0 reg error dts [1/1]
PD#SWPL-4843
Problem:
CtsSimpleperfTestCases 1 Fail on p231
Solution:
gxl,gxm,txl perf sys_cpu_status0 reg config error
modify it
Verify:
p212
Change-Id: Ie6e8747e8e4f02734bd7883ce6dcbc3fd3d28829
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Nan Li [Thu, 14 Feb 2019 02:43:31 +0000 (10:43 +0800)]
sd: add sduart not supported flag [1/1]
PD#SWPL-4858
Problem:
tl1 not support sduart
Solution:
add not supported flag in match_data
Verify:
verify by tl1 skt
Change-Id: I651765433bb62892fad770c85a5eccd4805e7c79
Signed-off-by: Nan Li <nan.li@amlogic.com>
Nan Li [Fri, 1 Feb 2019 01:59:00 +0000 (09:59 +0800)]
emmc: optimize the conditions of fixdiv calc [1/1]
PD#SWPL-4857
Problem:
fixdiv calc Affect the use of other chips
Solution:
Adjust the usage conditions for the fixdiv calc func, witch
pdata->calc_f from dts.
Verify:
verify by g12b
Change-Id: I9598e2a24f76c76f4312c2694029fe4bb0f534d4
Signed-off-by: Nan Li <nan.li@amlogic.com>
Shuai Li [Fri, 15 Feb 2019 02:39:14 +0000 (10:39 +0800)]
audio: remove unused PDM controls which cause panic [1/1]
PD#SWPL-3907
Problem:
PDM controls are dynamically added or removed.
This will bring in panic.
Solution:
Remove the unused controls.
Verify:
Need stress test.
Change-Id: I69f63a0516e0812e9abb86e42f091ecb496004d4
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Bichao Zheng [Fri, 15 Feb 2019 08:34:28 +0000 (16:34 +0800)]
gpio_led: g12a: give up using led-trigger cpu0 [1/1]
PD#SWPL-4876
Problem:
32bit will operate led-trigger cpu0 in cpu idle enter/exit causing
system led flashing.
Solution:
give up using led-trigger cpu0.
Verify:
g12a_u211 g12a_u212
Change-Id: I106a4fe0e35923919f5bbc34113fa73a4ca28577
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
Tao Zeng [Mon, 18 Feb 2019 06:53:09 +0000 (14:53 +0800)]
mm: reclaim for unevictable cma pages [1/1]
PD#SWPL-3902
Problem:
If cma page is unevictable, migrate it will cost long time.
Solution:
1. Recalim unevictable cma file cache pages.
2. Using CMA after first water mark not ok.
Verify:
einstern
Change-Id: I0ecbf5dd535cb034430c4ea623891e7a7ae6e4dd
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
changqing.gao [Fri, 25 Jan 2019 11:00:05 +0000 (19:00 +0800)]
ramdump: support ramdump for g12b/gxl [6/6]
PD#SWPL-4350
Problem:
ramdump is not enabled on g12b/gxl.
Solution:
Add ramdump support on g12b/gxl in bl2.
Verify:
verified on g12b_w400_v1/gxl_p212_v1.
Change-Id: I3520fea366af332ef113809560587eeb4db7b6c5
Signed-off-by: changqing.gao <changqing.gao@amlogic.com>
Brian Zhu [Mon, 18 Feb 2019 13:56:29 +0000 (21:56 +0800)]
vpp: correct the vpp dummy reg for g12a/g12b/tl1 [1/1]
PD#TV-1565
Problem:
After g12a chip, vpp post dummy reg was changed. The
test_screen/rgb_screen sysfs did not work.
Solution:
Use the correct vpp post dummy reg for those chip
Verify:
Verified on X301 and W400
Change-Id: I1cb718a1f7040804b63d0197de0bb6aafe233357
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
yuehu mi [Thu, 17 Jan 2019 12:51:44 +0000 (20:51 +0800)]
usb: remove usbphy reset 500ms wait [1/1]
PD#SWPL-4949
Problem:
kernel slow startup
Solution:
remove usbphy reset 500ms wait
Verify:
marconi platform insert U disk, power on boot verify OK
Change-Id: Ieb01e59ad428f98c3df303c7b3bee28397970c74
Signed-off-by: yuehu mi <yuehu.mi@amlogic.com>
Dianzhong Huo [Wed, 13 Feb 2019 02:36:29 +0000 (10:36 +0800)]
uart: change baud rate minimum value to 2400 [1/1]
PD#SH-327
Problem:
uart default min baud rate was set 9600, but PTZ PELCO-D
and PELCO-P need uart driver support 2400 and 4800 baud rate
Solution:
change baud rate minimum value to 2400
Verify:
Local
Change-Id: Iee20ea30a95b89f89a59fab95cecf7d559cbff51
Signed-off-by: Dianzhong Huo <dianzhong.huo@amlogic.com>
Pengcheng Chen [Sat, 2 Feb 2019 07:42:04 +0000 (15:42 +0800)]
gdc: unmap gdc dma_buf after gdc process stop [2/2]
PD#SWPL-4839
Problem:
have risk of unmap gdc dma_buf
Solution:
unmap gdc dma_buf after gdc process stop
Verify:
verify by w400
Change-Id: If86ac881fd85a5c4b3583567c9748e87149c1d78
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Pengcheng Chen [Sat, 2 Feb 2019 10:00:28 +0000 (18:00 +0800)]
ge2d: unmap ge2d dma_buf after ge2d process finished [1/2]
PD#SWPL-4839
Problem:
have risk of unmap ge2d dma_buf
Solution:
unmap ge2d dma_buf after ge2d process finished
Verify:
verify by w400
Change-Id: Ia84786b297f8e95cc9efc038300917c98d6b73f6
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Xing Wang [Mon, 18 Feb 2019 03:08:23 +0000 (11:08 +0800)]
audio: auge: fix hw resample crash when pcm disabled [1/1]
PD#SWPL-4387
Problem:
system would reboot when carshed by hw resample
Solution:
actrl of toddr is modified to null pointer, so it leads to crash.
fix to pass toddr pointer to function, not fetched by resample module.
Verify:
x301
Change-Id: I91c30260ee825d843e8ed17304031382b42ac119
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Hanjie Lin [Thu, 31 Jan 2019 02:58:01 +0000 (10:58 +0800)]
sched: eas: add sched-energy support for gxm [1/1]
PD#SWPL-4651
Problem:
Kernel 32bit Support for S912(kernel 4.9)
Solution:
add arm/arm64 sched-energy dts
Verify:
q201
Change-Id: I13077632b730d5f2b1427b3d9bee9ff24031cfcd
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Shuyu Li [Wed, 23 Jan 2019 11:11:46 +0000 (19:11 +0800)]
audio: codec: The tl1_acodec_probe takes 340ms time [1/1]
PD#SWPL-4345
Problem:
The tl1_acodec_probe operation takes 340ms time
Solution:
Using workqueue to replace the msleep func
Verify:
verify on T962x2_X309 board
Change-Id: I5316beb8a0e94ae022c948ec112b6fb219050212
Signed-off-by: Shuyu Li <shuyu.li@amlogic.com>
Tao Zeng [Fri, 15 Feb 2019 06:17:36 +0000 (14:17 +0800)]
mm: close vmap stack print for armv7 [1/1]
PD#SWPL-2681
Problem:
If cpu support idle/hotplug, there are many vmap stack prints:
[ 74.096973@1] cpu 1, vmap stack:[
e8e90000-
e8e91de0]
[ 74.097084@1] cpu 1, irq stack:[
e8e92000-
e8e93de0]
[ 74.105901@3] cpu 3, vmap stack:[
e8ee0000-
e8ee1de0]
[ 74.105984@3] cpu 3, irq stack:[
e8ee2000-
e8ee3de0]
Solution:
Close these debug print
Verify:
P212
Change-Id: I000df1f0952328af9f359f20341eb0fe88590056
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
jinrong.liao [Tue, 29 Jan 2019 07:23:14 +0000 (15:23 +0800)]
audio: enable spdif driver [1/1]
PD#SWPL-4223
Problem:
Add audio source switch feature for GVA
Solution:
enable spdif driver in dts
Verify:
verify by S420
Change-Id: Ia71b27ba95124b84415ec4f532fd344a24633911
Signed-off-by: jinrong.liao <jinrong.liao@amlogic.com>
Chao Liu [Tue, 12 Feb 2019 09:38:30 +0000 (17:38 +0800)]
dts: g12a/b: config hw rng with dts [1/1]
PD#OTT-2062
Problem:
Boot up time with power cable is longer than boot up with usb cable
Solution:
config hw rng with dts
Verify:
android p + u212
Change-Id: I61613e945dbc9be06f2cbb29aae5043c84fca1de
Signed-off-by: Chao Liu <chao.liu@amlogic.com>
Kaifu Hu [Mon, 28 Jan 2019 08:01:19 +0000 (16:01 +0800)]
hdmitx: add 3d framepack mode support [1/1]
PD#SWPL-4233
Problem:
3D framepacking mode display black screen
Solution:
Add vinfo 3d flag and hdmitx update
when work 3d mode
Verify:
U212
Change-Id: Ia2b7b25c9ed401dbec2c487ea2a5c6cc1e0d8b8d
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Jian Wang [Fri, 1 Feb 2019 08:08:05 +0000 (16:08 +0800)]
video: fixed video peek get first frame toggled err [1/1]
PD#SWPL-4048
Problem:
video peek can not get first frame toggled on 64bit
Solution:
add the cmd to amvideo_compat_ioctl
Verify:
verify on p212
Change-Id: I6933f305382d636f5f98f4bf19fddcf6ce9471c1
Signed-off-by: Jian Wang <jian.wang@amlogic.com>
Long Yu [Fri, 14 Dec 2018 09:13:36 +0000 (17:13 +0800)]
storage: emmc: Add HS400 busmode support for TL1 [1/1]
PD#SWPL-2311
Problem:
not support HS400 busmode
Solution:
add HS400 busmode support for TL1
Verify:
TL1-T962X2_X301
Change-Id: I95ac19e9c0c5b84c9225602cda6964aaaee4151e
Signed-off-by: Long Yu <long.yu@amlogic.com>
Pengcheng Chen [Fri, 1 Feb 2019 01:58:04 +0000 (09:58 +0800)]
osd: fix buidroot compile error issue [1/1]
PD#SWPL-4502
Problem:
buidlroot compile error
Solution:
fix buidroot compile error issue
Verify:
buildroot make linux-build
Change-Id: I0277c2b3f439946ab680f4c34f30c16e31ea6034
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
jintao xu [Thu, 31 Jan 2019 11:15:24 +0000 (19:15 +0800)]
omx: add print into level control [1/1]
PD#SWPL-85
Problem:
print into level control
Solution:
print into level control
Verify:
U212
Change-Id: Ib0fdc02f26e75c20e48171bca5ebef072947d78c
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
Jiamin Ma [Thu, 31 Jan 2019 08:41:15 +0000 (16:41 +0800)]
debug: fail to show active cpu stacks [1/1]
PD#SWPL-4718
Problem:
The task stack address is not saved to irq_stack_ptr-0x08,
so when switching from irq stack to task stack, we can not
obtain the right task stack address
Solution:
save task stack address to irq_stack_ptr-0x08
Verify:
Locally on Ampere
Change-Id: I8ad9a45cee33681cc00de3a0bb264dbd9f1b859f
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
he.he [Fri, 25 Jan 2019 07:44:08 +0000 (15:44 +0800)]
usb: check SoC rev [1/2]
PD#SWPL-4582
Problem:
Need to check Soc rev to distinguish G12B revB.
Solution:
Check Soc rev set version and phy-interface for g12b revB.
Test: make w400 bootimage
Verify:
pass on W400
Change-Id: I338d7f0eed7bb61660625343404f756f0edf0d54
Signed-off-by: he.he <he.he@amlogic.com>
jintao xu [Wed, 16 Jan 2019 02:14:49 +0000 (10:14 +0800)]
omx: add two layer support [3/6]
PD#SWPL-85
Problem:
Need support two video layers feature
Solution:
1: Add videosync.
2: amlvideo support multi-instance
Verify:
U212
Change-Id: I3570fad361ba5bd388dd46c51a66da056fa7a1fd
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
Pengcheng Chen [Fri, 25 Jan 2019 01:51:11 +0000 (09:51 +0800)]
osd: rdma write miss caused afbc mosaic [1/1]
PD#SWPL-4502
Problem:
afbc mosaic when bandwidth is high, root cause is
rdma write regs missed.
Solution:
1. add vsync line detected, if rdma write nearly
vsync, wait vsync needed
2. add rdma write detected, if rdma write missed
wait vsync needed
3. add tl1/g12b afbc backup
Verify:
Locally on tl1
Change-Id: If4fd303c3808525fa44e1118742a3e26830323f5
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Qianggui Song [Tue, 22 Jan 2019 06:40:06 +0000 (14:40 +0800)]
pinctrl: rename m8b pinmux function gpio to gpio_periphs [1/2]
PD#SWPL-4501
Problem:
All platforms but m8b use "gpio_periphs" as gpio pinctrl function, that
breaks consistency.
Solution:
rename m8b pinctrl function "gpio" to "gpio_periphs" to make it
consistent with code and other platform.
ref:
https://patchwork.kernel.org/patch/
10720219/
Verify:
m200
Change-Id: I940d1e30882cc8b042c02022ed3435a659aa3921
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Yingyuan Zhu [Thu, 17 Jan 2019 11:02:20 +0000 (19:02 +0800)]
jtag: meson: fix jtag pinmux settings issue [2/2]
PD#SWPL-4501
Problem:
Standard pinmux APIs were not used
Solution:
Setting pinmux instead of require for gpio
Verify:
tl1,g12a,g12b,axg,txl,txlx,gxl
Change-Id: I0ad88f414832686d795d252f70e81a34f6cb0f9e
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
Brian Zhu [Thu, 17 Jan 2019 19:25:21 +0000 (03:25 +0800)]
vpp: add osd and video zorder control [2/6]
PD#SWPL-85
Problem:
Upper layer need control osd and video layer zorder
Solution:
1.Add video layer zorder interface by sysfs and ioctl
2.Switch the osd and video layer order in vsync
Verify:
Verify on U212
Change-Id: Ic50e81784b865cc57e4ab9a63d74806f7a8721cf
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Brian Zhu [Tue, 15 Jan 2019 21:12:00 +0000 (05:12 +0800)]
vpp: add two layers support for each chips [1/6]
PD#SWPL-85
Problem:
Need support two video layers feature
Solution:
1.Add vd2 mif config
2.Add vd2 pps calculation and config
3.Add vd2 axis/crop/screen mode interface by sysfs and ioctl
4.Add layer query/alloc/free interface
Verify:
Verify on U212
Change-Id: I71fc9ab2ae0230c3e84c4b790e77d2c790951642
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
MingLiang Dong [Mon, 28 Jan 2019 06:36:14 +0000 (01:36 -0500)]
hdr: modify hdr gamut mtx for TV [1/1]
PD#SWPL-4638
Problem:
hdr video, color is light
Solution:
modify hdr gamut mtx, use bt2020rgb to 709rgb mtx
Verify:
verified on x301
Change-Id: Ia87493a57196b6a3a87c93535fed325b163cb562
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Jian Cao [Fri, 25 Jan 2019 09:16:05 +0000 (17:16 +0800)]
ge2d: merge ge2d from amlogic-3.14-dev [3/3]
PD#SWPL-4355
Problem:
ge2d: Adjust scaler para when input is nv21 and output is rgb
Solution:
merge patch 'Adjust scaler para when input is nv21 and output is rgb'
from amlogic-3.14-dev(PD#15652)
Verify:
verified on u200
Change-Id: I199b07d683a01175ec17d4d34be6febd3083920c
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Jian Cao [Fri, 25 Jan 2019 08:45:37 +0000 (16:45 +0800)]
ge2d: merge ge2d from amlogic-3.14-dev [2/3]
PD#SWPL-4355
Problem:
ge2d: play video display mess when used ionvideo
Solution:
merge patch 'play video display mess when used ionvideo'
from amlogic-3.14-dev(PD#155143)
Verify:
verified on u200
Change-Id: Iaf34fe1d1c7e7637015dadaaf43e201cf28089b7
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Jian Cao [Fri, 25 Jan 2019 08:40:51 +0000 (16:40 +0800)]
ge2d: merge ge2d from amlogic-3.14-dev [1/3]
PD#SWPL-4355
Problem:
ge2d: fix ge2d bitblt error
Solution:
merge patch 'fix ge2d bitblt error' from amlogic-3.14-dev(PD#154877)
Verify:
verified on u200
Change-Id: I4a813810837814931c3cb68f9a0f8a0929b06540
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Brian Zhu [Tue, 29 Jan 2019 16:13:45 +0000 (00:13 +0800)]
vpp: disable sr scale up when vskip > 2 [1/1]
PD#TV-2331
Problem:
SR insert unnecessary scale up to make scale down ratio
too larger.
Solution:
disable SR core0 which is before pps when mif vskip is > 2
Verify:
Locally on X301
Change-Id: I810fbae20f337e6eeb0a8e88d9758f78ad224254
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Cheng Tong [Wed, 23 Jan 2019 06:00:13 +0000 (14:00 +0800)]
dts: g12a: add clk_81 to enable demux pcr [1/1]
PD#SWPL-4469
Problem:
dolby files have no sounds after replay
Solution:
in u212, the clk_81 is null when init, it is related
to demux pcr, so add clk_81 to enable demux pcr
Verify:
verify by franklin
Change-Id: Id862e4e8ac49c19bbd52fa6fa4831de20abad6c8
Signed-off-by: Cheng Tong <cheng.tong@amlogic.com>
Lei Yang [Thu, 17 Jan 2019 11:59:32 +0000 (19:59 +0800)]
hdmirx: Chromecast box force to OESS mode [1/1]
PD#SWPL-4325
Problem:
it took long time to show image when connect with Google Chromecast box
Solution:
1. add specific dev detection by cec osd name & vendor ID
2. chromecast box force OESS
Verify:
verify by marconi
Change-Id: I56d247da1d1b1e28b60bb439f5173cb6fbecfdf9
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
Tao Zeng [Mon, 28 Jan 2019 02:18:11 +0000 (10:18 +0800)]
config: replace stack protector config [1/1]
PD#SWPL-4617
Problem:
CONFIG_CC_STACKPROTECTOR_STRONG will increase stack size for some large
functions and may cause stack overflow problems or increase real stack
usage after we have enabled VMAP STACK config. But direct remove it
from defconfig will cause CTS fail.
Solution:
using CONFIG_CC_STACKPROTECTOR_STRONG_AMLOGIC for real stack protect
config
Verify:
p212
Change-Id: I1ccba2ef6ab5ea6f2987af2986e0cf222da1a7c7
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Qiufang Dai [Wed, 23 Jan 2019 13:39:38 +0000 (21:39 +0800)]
cpuversion: add SoC rev api [1/2]
PD#SWPL-4582
Problem:
Need api to distinguish G12B revB
Solution:
Add rev A/B/C api
Verify:
W400
Change-Id: I5cf82fcfc513f621513914cf83d18fe5c5ec081d
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Tao Zeng [Wed, 23 Jan 2019 11:39:09 +0000 (19:39 +0800)]
watchpoint: add watch point driver for cpu [1/1]
PD#SWPL-4351
Problem:
Our cpu has 4 watch point on each cpu. It can be used for debug
purpose. But currently there is no driver support it.
Solution:
Bring up driver for it.
Verify:
p212
Change-Id: Ifbcb7f9b77e10fcb03b3c1a5e18f06b1a56ec2f0
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Yong Qin [Mon, 14 Jan 2019 08:50:12 +0000 (16:50 +0800)]
cec: ceca register access fail [1/1]
PD#SWPL-4133
Problem:
cec a register access fail and cause watchdog reboot
Solution:
reduce wait counter, and check clk register
Verify:
P215
Change-Id: Ic9d97e1eca9428ffd0c4a6bfe008cd9d8303075b
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Nanxin Qin [Sat, 26 Jan 2019 17:21:20 +0000 (01:21 +0800)]
tee: add an interface for the teeload with swapping. [1/1]
PD#SWPL-2367
Problem:
building err and issue of compatibility.
Solution:
1. fixed building err without merging media_modules
2. add a new api tee_load_video_fw_swap
Verify:
p212,u212
Change-Id: Ifeedf2f3fa04b2427dccf2ac3940bad6860362d6
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
Nanxin Qin [Thu, 20 Dec 2018 08:59:53 +0000 (16:59 +0800)]
tee: add swapping of the fw for the tee loading. [3/7]
PD#SWPL-2367
Problem:
can not playback hevc after update video fw.
Solution:
add swapping of the fw for the tee loading.
Verify:
p212,u212
Change-Id: I698e43ba8e71060f85be4b468c4c61d625f46d4a
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
yujie.wu [Mon, 21 Jan 2019 09:25:19 +0000 (17:25 +0800)]
audio: Add HBR audio info for HDMI input [2/3]
PD#SWPL-3435
Problem:
P321 doesn't support DTS HD decoding
Solution:
In HDMI RX module, we add a new field to
indicate whether the input audio is HBR.
With this info, hal can enable the PAO
mode to decode the HBR audio.
Verify:
P321
Change-Id: I6fd180e6636905f5119fe1d313214d4b56d07d5e
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
Nian Jing [Wed, 23 Jan 2019 11:54:49 +0000 (19:54 +0800)]
avin: fix av detect issue for tl1 [1/1]
PD#SWPL-4397
Problem:
hotplug incorrect report when av playing some video
Solution:
when avplay,disable the avdetect
Verify:
verified by x301
Change-Id: Iaa5d2473611ff9c3f0a0787ff74a27982ee72580
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Brian Zhu [Fri, 25 Jan 2019 05:27:59 +0000 (13:27 +0800)]
vpp: force vd2 using preblend when playing mvc [1/1]
PD#SWPL-3381
Problem:
vd2 used postblend as default after g12a chip
Solution:
force vd2 using preblend when playing mvc
Verify:
Locally on u212
Change-Id: Ia7fab8ad70ed1e58b7ade241828afab288b94bec
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Hong Guo [Tue, 22 Jan 2019 06:25:58 +0000 (14:25 +0800)]
cpufreq: add more syspll freq info [1/1]
PD#SWPL-4035
Problem:
add more syspll freq info.
Solution:
add more syspll freq info.
Verify:
g12a_u200, verify pass
Change-Id: I3e2a587f5ebaa20126e6ad5c37bd9d2730a75125
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
yicheng shen [Fri, 25 Jan 2019 08:32:01 +0000 (03:32 -0500)]
hdmirx: modify emp mem size [1/1]
PD#SWPL-4513
Problem:
The memery size of emp is oversize
Solution:
reduce the memery size to 4M
Verify:
None
Change-Id: If39103a6643968f4a3000c7ba44f44e1b7e290c2
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Jian Cao [Tue, 22 Jan 2019 09:16:17 +0000 (17:16 +0800)]
gdc: reset alloc flag when free dma buffer [2/2]
PD#SWPL-4354
Problem:
alloc flag is not correct when free dma buffer
Solution:
reset alloc flag when free dma buffer
Verify:
test pass on g12a-u200
Change-Id: Idfc0be5b394d18799232f6239b3f6c6df9181ce0
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Jian Cao [Fri, 18 Jan 2019 07:33:52 +0000 (15:33 +0800)]
ge2d: reset alloc flag when free dma buffer [1/2]
PD#SWPL-4354
Problem:
alloc flag is not correct when free dma buffer
Solution:
reset alloc flag when free dma buffer
Verify:
test pass on g12a-u200
Change-Id: I4aea27f38ebda72cfe77183423600c918b836d7c
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Brian Zhu [Sun, 20 Jan 2019 16:19:47 +0000 (00:19 +0800)]
vpp: disable vd2 again if the last vframe is MVC [1/1]
PD#SWPL-4003
Problem:
VD2 keep displaying after keep last frame for mvc streaming
Solution:
check the last frame type and disable vd2 again
Verify:
verify by tl1
Change-Id: Ia2b598331e8f65c02974d41c498408bee40a407e
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Yong Qin [Tue, 1 Jan 2019 02:28:08 +0000 (10:28 +0800)]
vlock: screen flash after PAL NTSC swich [1/1]
PD#SWPL-4246
Problem:
the screen always flash after switch PAL to NTSC in AVin
Solution:
do not change pll M value, M value will case v by one fail
Verify:
verified on tl1 android p
Change-Id: Ib5ea8dfef1c40af5535e69fdc9241a7f77b4a7dd
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Pengcheng Chen [Wed, 23 Jan 2019 09:22:39 +0000 (17:22 +0800)]
osd: fix display frame offset caused osd display abnormal [1/1]
PD#OTT-1663
Problem:
display frame offset caused osd display abnormal
Solution:
remove unnecessary blend dst_data adjust
Verify:
Locally on raven
Change-Id: I38b97f6da750f5edea97416b4d7fc0172dea7466
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Zhiwei Yuan [Fri, 18 Jan 2019 07:09:12 +0000 (15:09 +0800)]
dtv_demod: tl1,dvbc, new method for fast channel searching [1/1]
PD#TV-2154
Problem:
[Hisense-T962X2-P-customer-DTV]:DVBC QAM is set to auto to search channels
Solution:
add new searching method
note:
use "demod_dvbc_speedup_en" to mark the new method
it's disabled as default, can be enabled if needed
we can make it always enabled after all testing are passed
enable: echo fast_search on > /sys/kernel/debug/demod/dvbc_channel_fast
Verify:
verified by t962x2_x301
Change-Id: Icaaab9f27eb058a062d7048c6ca9fa2e3bff008e
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
Dianzhong Huo [Thu, 10 Jan 2019 07:21:09 +0000 (15:21 +0800)]
dts: isp reserved memory optimize on w411 platform [1/1]
PD#SWPL-4577
Problem:
ISP reserve memory needs to be optimized.
Solution:
1.cost down isp reserved memory(just support 1ch 1080P60fps)
2.temper size default set 24M(config in dtsi)
Verify:
verify on w411 platform.
Change-Id: I5df16e7625be09c6feebcf74ea56b24f5a0f451b
Signed-off-by: Dianzhong Huo <dianzhong.huo@amlogic.com>
shuanglong.wang [Thu, 17 Jan 2019 09:58:00 +0000 (17:58 +0800)]
video: video peek do not post video start event [1/1]
PD#SWPL-4317
Problem:
for video peek, before audio post audio start, video may have rended.
Solution:
do not post video start for video peek, all wait for audio start to
start pcr
Verify:
verify by p212
Change-Id: If5656154e30613164465f84c44d3fd1ee386d654
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
nengwen.chen [Wed, 23 Jan 2019 05:12:17 +0000 (13:12 +0800)]
tvafe: get cvbs lock status error [1/1]
PD#TV-1548
Problem:
get cvbs lock status error.
Solution:
fix h_lock and v_lock status.
Verify:
verified by x301
Change-Id: Ia5e618c42280e7964399122b9b039a6f0d7da305
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Dianzhong Huo [Thu, 10 Jan 2019 11:43:14 +0000 (19:43 +0800)]
ipc: add ircut driver for ipc camera [1/1]
PD#SWPL-4078
Problem:
Need porting ircut driver for ipc camera.
Solution:
Add ircut driver.
ircut auto on/off by light in sensor.
Verify:
Verify on W411 platform.
Change-Id: I4f20f0a1e117e8e4e7f94dead6a65f243169827f
Signed-off-by: Dianzhong Huo <dianzhong.huo@amlogic.com>
wenbiao zhang [Fri, 18 Jan 2019 09:03:54 +0000 (17:03 +0800)]
bandwidth: fix wrong bandwidth usage on t950 [1/3]
PD#TV-470
Problem:
t950 ddr bandwidth usage is error
Solution:
t950/805x ddr is 16bit, correct the param to get right usage
Verify:
t950
Change-Id: Ice876f82e5c33e778b3ac9f593e0c163d57d7f3f
Signed-off-by: wenbiao zhang <wenbiao.zhang@amlogic.com>
tao zeng [Fri, 30 Nov 2018 10:01:31 +0000 (18:01 +0800)]
mm: optimize thread stack usage on ARMv7 [1/1]
PD#SWPL-2681
Problem:
Kernel stack usage is large when running many tasks.
Solution:
Map kernel stack to module space and handle page-fault
for stack fault. This can save about 50% memory of stack
usage
Verify:
p212
Change-Id: Ie894bc8f00cb525ddf8ac63c6d99d9c6e937fdc0
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Guosong Zhou [Thu, 17 Jan 2019 09:17:20 +0000 (04:17 -0500)]
isp: config temper buffer size in dts [1/2]
PD#SWPL-4177
Problem:
temper buffer size is a fixed value in code
Solution:
config temper buffer size from dts
Verify:
verify by w400
Change-Id: I17ef428221f149a888e0318bc27d7b7d309c00ce
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
Xuhua Zhang [Mon, 14 Jan 2019 07:09:35 +0000 (15:09 +0800)]
tvin: vdin: add interface to get signalinfo [1/1]
PD#TV-2083
Problem:
TVIN_IOC_G_SIG_INFO not complete enough
Solution:
add interface to get signalinfo
Verify:
Verify on TL1
Change-Id: I32f198f14dfcc1f8a8ee1f19c4065bd7d4d5dccc
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
Pengcheng Chen [Tue, 22 Jan 2019 06:42:34 +0000 (14:42 +0800)]
osd: fix a green line displayed when output is yuv420 4k/60hz [1/1]
PD#SWPL-4427
Problem:
a green line displayed when output is yuv420 4k/60hz
Solution:
set dummy data to 0x808000 can fix a green line
displayed when output is yuv420 4k/60hz
Verify:
verify by fanklin
Change-Id: I06125d36c2fb06a61dd072a1789217e7c3705207
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Dianzhong Huo [Tue, 22 Jan 2019 08:18:49 +0000 (16:18 +0800)]
dts: remove A53 frequency table greater than 1.5Ghz [1/1]
PD#SWPL-4521
Problem:
New W411 reference board A53 power combine with vddee,
becaule vddee voltage set at 800mv,so need remove
A53 dvfs table which voltage greater than 800mv
Solution:
Remove A53 frequency table greater than 1.5Ghz
Verify:
Local
Change-Id: I05a2b51f704b25a0654881d6da3372fcd2f2a051
Signed-off-by: Dianzhong Huo <dianzhong.huo@amlogic.com>
Jiyu Yang [Tue, 8 Jan 2019 09:38:23 +0000 (17:38 +0800)]
gpu: limit gpu freq to 800M for tl1 [1/1]
PD#SWPL-3981
Problem:
the gpu shall not use the gp0 pll as vlsi guy's suggestion.
Solution:
rm 850M from gpu freq table
Verify:
Marconi, franklin
Change-Id: I38ae616de23d51ede36776f0ecd66d0a3df30459
Signed-off-by: Jiyu Yang <jiyu.yang@amlogic.com>