mm: close vmap stack print for armv7 [1/1]

PD#SWPL-2681

Problem:
If cpu support idle/hotplug, there are many vmap stack prints:
[   74.096973@1] cpu 1, vmap stack:[e8e90000-e8e91de0]
[   74.097084@1] cpu 1, irq  stack:[e8e92000-e8e93de0]
[   74.105901@3] cpu 3, vmap stack:[e8ee0000-e8ee1de0]
[   74.105984@3] cpu 3, irq  stack:[e8ee2000-e8ee3de0]

Solution:
Close these debug print

Verify:
P212

Change-Id: I000df1f0952328af9f359f20341eb0fe88590056
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>

mm: optimize thread stack usage on ARMv7 [1/1]

PD#SWPL-2681

Problem:
Kernel stack usage is large when running many tasks.

Solution:
Map kernel stack to module space and handle page-fault
for stack fault. This can save about 50% memory of stack
usage

Verify:
p212

Change-Id: Ie894bc8f00cb525ddf8ac63c6d99d9c6e937fdc0
Signed-off-by: tao zeng <tao.zeng@amlogic.com>

codec_mm: changes the prot of pages to PAGE_KERNEL. [2/2]

PD#SWPL-4597

Problem:
Probabilistic full-screen display mosaic after seek 8K H265

Solution:
alloc mem area with the cached which from the vmap. this way
can improve the efficiency of I/O.

Change-Id: Icf18b9cd57bdc54f832aa827a535399939b28611
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>

codec_mm: fixed some issues of the mem operation. [1/2]

PD#SWPL-3593

Problem:
the memory data might be discordant.

Solution:
1. opitimize the mem mapping and change the page type to nocache.
2. modified the way of flush mem which from lowmem or highmem.

Verify:
x301

Change-Id: I82351c235915c98a86fd201c2ff3994e4d2085ec
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>

media_module: vdec [1/1]

PD#OTT-1699

Problem:
not support multi-vdec user data read

Solution:
Add getting available user data vdec interface

Verify:
Verified U212

Change-Id: I9ec65367935ac42a83808db23f2fb08f694e1483
Signed-off-by: Rong Zhang <rong.zhang@amlogic.com>

clkmsr: axg: delete hard code which added during bringup [1/1]

PD#SWPL-5356

Problem:
when cat clkmsr node in sysfs, i2c bus does not work

Solution:
delete hard code

Verify:
verify on axg s400

Change-Id: Ib01f251f4b77685db5a57df395f1c1a75620c07b
Signed-off-by: Jian Hu <jian.hu@amlogic.com>

ethernet: remove internal_phy_remove [1/1]

PD#SWPL-5478

Problem:
system will crash rately if not init success

Solution:
remote internal_phy_remove function for chip
later then g12a

Verify:
verify on u200 board

Change-Id: Id6c3bf77c2a448aee9675deff47dc106206146d6
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>

dv: hang when home during DoVi playback [1/1]

PD#SWPL-4406

Problem:
SDR meta size > 0 during DoVi to SDR transition

Solution:
fixed SDR meta size to 0 for SDR

Verify:
u212

Change-Id: I92129163da0df9c81bb508ce56b78268fbd87a2e
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>

codec_mm: Fix cma clear and rebuild map for codec_mm. [1/1]

PD#172483

Problem:
To avoid A73 core speculative data loading from protected
memory, which triggers SError fault, the mapping of the
protected region should be cleared. In codec_mm driver, the
page structure pointer used to clear the mapping is wrong.
Although the memory is allocated from CMA, because we are
using CMA_res mode the address from CMA_res_pool is actually
a physical address, similar as reserved memory case. As a
result, the mapping to protected address is not cleared.

Solution:
1.Add "mem->from_flags ==
  AMPORTS_MEM_FLAGS_FROM_GET_FROM_CMA_RES" case processing.

Verify:
Run YTTV and there is no SError crash after the fix.

Change-Id: Ia912337c1d7d5a55800fc55ad1d61016f9710f4d
Signed-off-by: Kai Song <kai.song@amlogic.com>

di: play 1080i timing always print di err[1/1]

PD#SWPL-5807

Problem:
1080i always print di err,modify di pre idle register
define are wrong

Solution:
1.modify register define according g12a

Verify:
g12a

Change-Id: I13400d8b18e0e85894ba8d10afc0ae119874aab4
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
drivers/amlogic/media/deinterlace/deinterlace.c

canvas: get canvas w/h for frame check [2/2]

PD#SWPL-1738

Problem:
support frame crc32 check and dump yuv.

Solution:
support frame check and yuv dump in media_module, add interface
to get canvas width/height.

Verify:
u212

Change-Id: Ieadc95521c4a21bec5685f8c8926d3bb2f92637b
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>

media_module: add function to statistics drop frame on video layer [1/1]

PD#SWPL-1885

Problem:
    We need a function to statistics drop frame.

Solution:
    Add a function to statistics drop frame.

Verify:
    Verified U212

Change-Id: I30b429c2f3710c5c8d0da6ec083060c9cc3e61ad
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>

vpp: refresh the vd/osd blend ctrl when enable/disable video [1/1]

PD#SWPL-4932

Problem:
The vd/osd blend ctrl is not correct when disable video

Solution:
Refresh the vd/osd blend ctrl for that case

Verify:
Verified on tl1

Change-Id: I6a7bfc58c810279cdfbf55f3d6a51e94890b4899
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>

tee: add an interface for the teeload with swapping. [1/1]

PD#SWPL-2367

Problem:
building err and issue of compatibility.

Solution:
1. fixed building err without merging media_modules
2. add a new api tee_load_video_fw_swap

Verify:
p212,u212

Change-Id: Ifeedf2f3fa04b2427dccf2ac3940bad6860362d6
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>

tee: add swapping of the fw for the tee loading. [3/7]

PD#SWPL-2367

Problem:
can not playback hevc after update video fw.

Solution:
add swapping of the fw for the tee loading.

Verify:
p212,u212

Change-Id: I698e43ba8e71060f85be4b468c4c61d625f46d4a
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>

osd: move wait hw vsync for afbc when phy_addr==0 only before chip g12A  [1/1]

PD#SWPL-5148

Problem:
bootvideo stuck when starting to play

Solution:
wait hw vsync for afbc when phy_addr==0 only before chip g12A

Verify:
tl1

Change-Id: I883c8f6699729854a852fc70c22b5629aa025c60
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>

osd: osd: screen blank when boot [1/1]

PD#172587

Problem:
screen blank when boot

Solution:
modify free_scale_switch

Verify:
verified on tl1 dev board

Change-Id: I3c53e832c83c71bd8e98f71fcd654865a467df3c
Signed-off-by: Jian Cao <jian.cao@amlogic.com>

clk: g12a: clear pcie cntl5 for save power [1/1]

PD#SWPL-4583

Problem:
cntl5 caused power increase

Solution:
clear pcie cntl5 when pcie clk disabled

Verify:
test pass on g12a skt

Change-Id: I495590af2ccb81eb5ae90c86008679def8673a70
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>

printk: fix print_time bug when run dmesg [1/1]

PD#SWPL-4900

Problem:
printk_prefix() passes NULL buf to print_time() to get the length of
the time prefix; when printk times are enable, the current code just
return "snprint(NULL, 0, "[%5lu.000000]", (unsigned long)ts)"
but in the SMP case, we add cpu core id at the end of time prefix, the
format is "[%5lu, %06lu@%d]", this gives a wrong size(shorter).

this will make buf get out of boundary, when run dmesg.

Solution:
replace [%5lu.000000] with [%5lu.000000@0]

Verify:
g12a-u200

Change-Id: Ic74b9f466b5af5aac7e6569a1afc7a46d9594050
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>

mm: The first 1MB mem is wasted for CPU series coming after TXLX [1/1]

PD#SWPL-3744

Problem:
For the previous Amlogic CPU series(before TXLX), the CPU booting vector
locates at physical address starting from 0x00. To avoid influencing cpu
booting procedure, we have to reserve the first 1MB physical memory. But
it has changed since TXLX, the normal text section can safely use 0~1M
physical address. So it's no need to reserve the first 1MB in DTS.

Solution:
Change the starting address of usable memory from 0x100000 to 0x0 for CPU
series coming after TXLX.

Verify:
Locally on W400

Change-Id: I2df7859a38feca48abd58459e8b231ee15ada9e2
Signed-off-by: changqing.gao <changqing.gao@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/txlx_t962x_r311_1g.dts
arch/arm64/boot/dts/amlogic/tl1_t962x2_t309.dts
arch/arm64/boot/dts/amlogic/tl1_t962x2_x301.dts

dts: fix the warnings when compiling the g12a device tree. [1/1]

PD#SWPL-4967

Problem:
warning when compiling the g12a device tree.

Solution:
fix the warning.

Verify:
locall.

Change-Id: I1f93c788d1914441e48305c04330701bfd718b87
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>

deinterlace: modify suspend function [1/1]

PD#SWPL-4196

Problem:
atv suspend/resume, DI deadlock causing hangup

Solution:
add unreg process and clear timer/tasklet

Verify:
tl1

Change-Id: Id50de8649455f0a2f77ad2fcb585bf233d5c362f
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>

hdmitx: rename HDMI_IEEE_OUI to avoid conflicts [1/1]

PD#SWPL-4705

Problem:
In 61207 patch, the define HDMI_IEEE_OUI is conflicted with the kernel
head file include/linux/hdmi.h

Solution:
rename HDMI_IEEE_OUI

Verify:
GXL/P212

Change-Id: I75a12734e85478f22edf0b48636ed86e60302b58
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>

hdmitx: add auto low latency mode(ALLM) [1/1]

PD#SWPL-4705

Problem:
Lack ALLM function

Solution:
Add ALLM function

Verify:
GXL/P212
If Rx supports ALLM, then
echo 1 > /sys/class/amhdmitx/amhdmitx0/allm_mode
otherwise it will set failed, cat allm_mode and will get 0.

Change-Id: I00233e5a5aac133b405590e7df78c7c4805ed0ef
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>

hdmitx: add rx latency info [1/4]

PD#SWPL-2456

Problem:
Lack the latency info of RX

Solution:
Add the latency info of RX

Verify:
T962E/R321

Change-Id: I480398466753dd93ca6e908d39157acadff6879f
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>

camera: config adapter buffer size from dts [1/2]

PD#SWPL-4934

Problem:
kernel panic when adjust adapter memory size

Solution:
config adapter buffer size from dts

Verify:
verify by w411

Change-Id: Ie66cf57e870e140dd63516672c7f90f7d9ddda72
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>

license: add missing license header [1/1]

PD#SWPL-4728

Problem:
Missing license header

Solution:
Add correct license header

Verify:
Compling passed

Change-Id: I291a41172f9ecf2cde7f7705e99ecb20567c9c8f
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>

perf: fix sys_cpu_status0 reg error dts [1/1]

PD#SWPL-4843

Problem:
CtsSimpleperfTestCases 1 Fail on p231

Solution:
gxl,gxm,txl perf sys_cpu_status0 reg config error
modify it

Verify:
p212

Change-Id: Ie6e8747e8e4f02734bd7883ce6dcbc3fd3d28829
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/mesontxl.dtsi
arch/arm64/boot/dts/amlogic/mesontxl.dtsi

vpp: correct the vpp dummy reg for g12a/g12b/tl1 [1/1]

PD#TV-1565

Problem:
After g12a chip, vpp post dummy reg was changed. The
test_screen/rgb_screen sysfs did not work.

Solution:
Use the correct vpp post dummy reg for those chip

Verify:
Verified on X301 and W400

Change-Id: I1cb718a1f7040804b63d0197de0bb6aafe233357
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>

audio: remove unused PDM controls which cause panic [1/1]

PD#SWPL-3907

Problem:
PDM controls are dynamically added or removed.
This will bring in panic.

Solution:
Remove the unused controls.

Verify:
Need stress test.

Change-Id: I69f63a0516e0812e9abb86e42f091ecb496004d4
Signed-off-by: Shuai Li <shuai.li@amlogic.com>

sched: eas: add sched-energy support for gxm [1/1]

PD#SWPL-4651

Problem:
Kernel 32bit Support for S912(kernel 4.9)

Solution:
add arm/arm64 sched-energy dts

Verify:
q201

Change-Id: I13077632b730d5f2b1427b3d9bee9ff24031cfcd
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>

perf: arm: enable pmuserenr [1/1]

PD#SWPL-4673

Problem:
userspace can't access perf monitor cnt with "mrc ... c9,c13,0"

Solution:
actually userspace should check perf monitor cnt access permissions first
before use, so this is a workround.
enable pmuserenr with "mcr ... c9,c14,0" in several places:
1, perf probe
2, cpu idle (state>0) exit
3, cpu online
4, system resume after suspend

Verify:
u212

Change-Id: Ib09682d1d47545dfef8b088283ddbbf390630d3e
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>

vpp: disable sr scale up when vskip > 2 [1/1]

PD#TV-2331

Problem:
SR insert unnecessary scale up to make scale down ratio
too larger.

Solution:
disable SR core0 which is before pps when mif vskip is > 2

Verify:
Locally on X301

Change-Id: I810fbae20f337e6eeb0a8e88d9758f78ad224254
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>

config: replace stack protector config [1/1]

PD#SWPL-4617

Problem:
CONFIG_CC_STACKPROTECTOR_STRONG will increase stack size for some large
functions and may cause stack overflow problems or increase real stack
usage after we have enabled VMAP STACK config. But direct remove it
from defconfig will cause CTS fail.

Solution:
using CONFIG_CC_STACKPROTECTOR_STRONG_AMLOGIC for real stack protect
config

Verify:
p212

Change-Id: I1ccba2ef6ab5ea6f2987af2986e0cf222da1a7c7
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>

emmc: optimize the conditions of fixdiv calc [1/1]

PD#SWPL-4857

Problem:
fixdiv calc Affect the use of other chips

Solution:
Adjust the usage conditions for the fixdiv calc func, witch
pdata->calc_f from dts.

Verify:
verify by g12b

Change-Id: I9598e2a24f76c76f4312c2694029fe4bb0f534d4
Signed-off-by: Nan Li <nan.li@amlogic.com>

clk: g12a/g12b: update pcie clk parameter for jitter [1/1]

PD#SWPL-4745

Problem:
update pcie parameter for jitter

Solution:
clear pcie clk parameter

Verify:
test pass on g12a skt/w400

Change-Id: I354d643c412c37fb6c99fc49ac5bd70ab12be008
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>

vpp: sr: correct the sr core0 enable switch operation [1/1]

PD#SWPL-5113

Problem:
SR core0 enable switch register is latched as default. It
will cause the screen flicker when operating this bit in vsync.
Because the frame size will be out of sync with back-end module.

Solution:
1. For g12a, no latch ctrl. So did not disable sr core2 enable bit.
2. For g12b/tl1, disable the latch function.

Verify:
Verified on U212/w400/x301

Change-Id: I54027b71ef8a6066004b3bd32ed1633b4bfa351c
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>

clk: g12a/g12b: fix syspll overflow when freq larger than 2.1g [1/1]

PD#SWPL-5076

Problem:
syspll overflow

Solution:
div 1000 when round rate

Verify:
test pass on g12a skt/w400

Change-Id: I021a1e8fd1280b27e21e5b4c8983b91fb89e84ba
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>

dts: g12b: modify sched-energy dts for w400 revision-b [1/1]

PD#SWPL-5020

Problem:
modify sched-energy dts for w400 revision-b

Solution:
modify dts

Verify:
local.

Change-Id: I6686abc10bf07ec0e601eb9a72b7657ca3e1d991
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>

dts: add new frequency for A53 core at all g12b RevB dts [1/1]

PD#SWPL-5020

Problem:
need 1.9G for A53 core in g12b RevB.

Solution:
add 1.9G frequency for A53 core in RevB dts.

Verify:
local test.

Change-Id: Ic4085c05b3b9d18f759720e3d268d5e4629faba7
Signed-off-by: pan.yang <pan.yang@amlogic.com>

dts: fix amlogic-dt-id error in g12b dts. [1/1]

PD#SWPL-5020

Problem:
amlogic-dt-id error in g12b dts.

Solution:
specify amlogic-dt-id by dts name.

Verify:
local test.

Change-Id: I11a737ec61221c2dc9fcd4e3761c380ac5b5044b
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>

dts: g12b: copy g12b dts [1/1]

PD#SWPL-5020

Problem:
copy g12b dts.

Solution:
copy.

Verify:
local.

Change-Id: Ibd6423bd0cc99e98bf1d6359068f9f0719ad177f
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/g12b_a311x_w411_buildroot.dts

hdr: used line_n_int to trigger osd rdma [2/2]

PD#SWPL-4582

Problem:
g12b revb osd blend shift issue still exist
when hdr enable/disable

Solution:
used line_n_int to trigger osd hdr rdma,
this workaround can fix shift issue

Verify:
verify by g12b revb

Change-Id: I062c31dbb5729463bae539e2ea25281d715665c9
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>

rdma: used line_n_int to trigger osd, dv and hdr rdma [1/2]

PD#SWPL-4582

Problem:
g12b revb osd blend shift issue still exist
when dv and hdr enable/disable

Solution:
used line_n_int to trigger osd, dv and hdr rdma,
this workaround can fix shift issue

Verify:
verify by g12b revb

Change-Id: Ie9747b2f7aaa3a7997245f82d15831c4c3da41cf
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>

dv: remove g12b ver B from the status of SDR mode [1/1]

PD#SWPL-4582

Problem:
g12 verA has a hardware bug.Therefore,dv cores
must keep working even if under sdr mode

Solution:
g12B verB has fixed this bug, so remove this chip id

Verify:
verify by g12b revb

Change-Id: Ice1aa1364319fa12d5a896fdfd106450f1a04d3d
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>

osd: add g12b revb to check osd shift workaround [1/1]

PD#SWPL-4582

Problem:
g12b revb fix osd blend shift issue

Solution:
add g12b revb to remove shift workaround

Verify:
verify by g12b revb

Change-Id: I6cefba0b5b5cce35d928edafdc359adff0165866
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>

usb: check SoC rev [1/2]

PD#SWPL-4582

Problem:
Need to check Soc rev to distinguish G12B revB.

Solution:
Check Soc rev set version and phy-interface for g12b revB.

Test: make w400 bootimage

Verify:
pass on W400

Change-Id: I338d7f0eed7bb61660625343404f756f0edf0d54
Signed-off-by: he.he <he.he@amlogic.com>

cpuversion: add SoC rev api [1/2]

PD#SWPL-4582

Problem:
Need api to distinguish G12B revB

Solution:
Add rev A/B/C api

Verify:
W400

Change-Id: I5cf82fcfc513f621513914cf83d18fe5c5ec081d
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>

usb: remove usbphy reset 500ms wait [1/1]

PD#SWPL-4949

Problem:
kernel slow startup

Solution:
remove usbphy reset 500ms wait

Verify:
marconi platform insert U disk, power on boot verify OK

Change-Id: Ieb01e59ad428f98c3df303c7b3bee28397970c74
Signed-off-by: yuehu mi <yuehu.mi@amlogic.com>

dv: dolby vision support on t962x [1/1]

PD#SWPL-3318

Problem:
Android P not support dolby vision on t962x

Solution:
Porting code support dolby vision

Verify:
t962x/r311

Change-Id: I85afd05d2cb21a7105ea345f07e7e581bba5e927
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>

osd: osd: screen blank after boot logo [1/1]

PD#172587

Problem:
screen blank after boot logo

Solution:
correct default display information

Verify:
verified on tl1 ref board

Change-Id: I94237b5241eacee6965bfe4ea0426bb8e9f494f1
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
osd: tl1 hold line fix needn't shift workaround [1/1]

PD#172587

Problem:
tl1 hold line fix needn't shift workaround.

Solution:
remove shift workaround int tl1

Verify:
verified by x301

Change-Id: I96d99758ba6f93622c34a8e69c4a3f769fdfad49
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
usb: bringup usb for tl1 [1/1]

PD#172587

Problem:
bringup usb for tl1

Solution:
bringup usb for tl1.
disable usb device sof interrupt for tl1.

Verify:
verify on tl1 skt.

Change-Id: Ifbcd3b406145ac39709ff2df795544086277f00e
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/mesontl1.dtsi

CPUFREQ: Setting different cpufreq tables according to efuse information. [1/1]

PD#SWPL-4035

Problem:
Setting different cpufreq tables according to efuse information.

Solution:
Setting different cpufreq tables according to efuse information.

Verify:
g12a_u200, verify pass

Change-Id: I1bf571f332244f5727ef3cd8743f215f71248146
Signed-off-by: Hong Guo <hong.guo@amlogic.com>

mailbox: mailbox: add chip performance info read from efuse [2/2]

PD#SWPL-4035

Problem:
cpu driver need read efuse data

Solution:
add interface to read data

Verify:
g12a_skt

Change-Id: Ia5d74c3fa057d06426b4277652e508714400a30f
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>

cpufreq: add more syspll freq info [1/1]

PD#SWPL-4035

Problem:
add more syspll freq info.

Solution:
add more syspll freq info.

Verify:
g12a_u200, verify pass

Change-Id: I3e2a587f5ebaa20126e6ad5c37bd9d2730a75125
Signed-off-by: Hong Guo <hong.guo@amlogic.com>

gdc: reset alloc flag when free dma buffer [2/2]

PD#SWPL-4354

Problem:
alloc flag is not correct when free dma buffer

Solution:
reset alloc flag when free dma buffer

Verify:
test pass on g12a-u200

Change-Id: Idfc0be5b394d18799232f6239b3f6c6df9181ce0
Signed-off-by: Jian Cao <jian.cao@amlogic.com>

ge2d: reset alloc flag when free dma buffer [1/2]

PD#SWPL-4354

Problem:
alloc flag is not correct when free dma buffer

Solution:
reset alloc flag when free dma buffer

Verify:
test pass on g12a-u200

Change-Id: I4aea27f38ebda72cfe77183423600c918b836d7c
Signed-off-by: Jian Cao <jian.cao@amlogic.com>

vpp: force vd2 using preblend when playing mvc [1/1]

PD#SWPL-3381

Problem:
vd2 used postblend as default after g12a chip

Solution:
force vd2 using preblend when playing mvc

Verify:
Locally on u212

Change-Id: Ia7fab8ad70ed1e58b7ade241828afab288b94bec
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>

perf_event: aml pmu interrupts routing on g12b [1/1]

PD#SWPL-3088

Problem:
g12b big-little cluster is different from other SoC with pmu
interrupts and registers.
software modifications must adapt to the difference.

Solution:
modify

Verify:
u200 w400

Change-Id: If9217c1025dff5c17d51790f8c216e31b7d6532b
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>

defconfig: arm: code score is low by Antutu benchmark [1/1]

PD#SWPL-3704

Problem:
32bit code score is low by Antutu benchmark.

PD#SWPL-3704

Solution:
enable CONFIG_SCHED_WALT CONFIG_CGROUP_SCHEDTUNE CONFIG_SCHED_TUNE
referenced by arm64

Verify:
w400

Change-Id: I6f461020b0fb0e42be94f1c66f5c38defb2c6ea1
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>

dv: close afbc2 when playing sources with unnecessary el [1/1]

PD#SWPL-915

Problem:
DOLBY only sets the enhancement for the first frame ->
Vd sets cur_dispubf2 according to enhance ->
codec_mm keeps the last frame according to cur_dispbuf2,
so it fails -> AFBC2 access to the released content causes the trigger.

Solution:
close afbc2

Verify:
r321

Change-Id: I03c431a6ea11b8aabf97b1f0b21f717024be2f62
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>

osd: fix osd_reverse casued afbc decode error [1/1]

PD#SWPL-4335

Problem:
osd_reverse casued afbc decode error

Solution:
add afbc prefect reverse when osd_reverse

Verify:
verify by tl1

Change-Id: I11730121e62935683480f42db7c43365bc91bf31
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>

Kconfig: fix errorly select meson8b for ARMv8 AARCH32 [1/1]

PD#SWPL-4320

Problem:
The meson8b and arm64_a32 are both selected in Kconfig,
which is quite misleading

Solution:
Disable meson8b when arm64_a32 is selected

Verify:
Locally passed for Ampere

Change-Id: I93f55239ea90bf8cf6b96e108b6fd4a239de32b4
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>

gdc: add gdc dma_buf input/output support [2/2]

PD#SWPL-4036

Problem:
gdc don't support export dma_buf

Solution:
add gdc dma_buf input/output support

Verify:
test pass on w400

Change-Id: I67a60ede01e5c01630a00fbae2821430a870c2b8
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
MAINTAINERS

ge2d: add ge2d dma_buf support [1/2]

PD#SWPL-4036

Problem:
don't support dma_buf

Solution:
add ge2d dma_buf support

Verify:
test pass on w400

Change-Id: I1277d04fb30753e579d5edc5f46f2406dc27217a
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>

emmc: modify dtb malloc method [1/1]

PD#SWPL-3951

Problem:
buffer malloc for dtb may failed

Solution:
malloc may sleep to wait for enough memory

Verify:
pass on p212

Change-Id: Ib4c266c17140d2a6abf2aea6c02b2ff591f0fe08
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>

gpio_led: g12a: give up using led-trigger cpu0 [1/1]

PD#SWPL-4876

Problem:
32bit will operate led-trigger cpu0 in cpu idle enter/exit causing
system led flashing.

Solution:
give up using led-trigger cpu0.

Verify:
g12a_u211 g12a_u212

Change-Id: I106a4fe0e35923919f5bbc34113fa73a4ca28577
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/g12b_a311x_w411_buildroot.dts

clk: g12a: add bt656 clock [1/1]

PD#SWPL-3359

Problem:
the bt656 clocks were missing

Solution:
1.add bt656 clocks
2.fix several errors for media clocks

Verify:
test passed on u200

Change-Id: Iff69e790c78335930d6b2ea54f7544aca464e1fb
Signed-off-by: Jian Hu <jian.hu@amlogic.com>

bt656: fix bt656 bugs [1/1]

PD#OTT-1022

Problem:
bt656 can not work well.

Solution:
1. add clock control
2. fix bt656 id bug

Verify:
G12A U200

Change-Id: I2aaecee33fd590497d5a11cf3618fc07264f02a5
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>

cec: ceca register access fail [1/1]

PD#SWPL-4133

Problem:
cec a register access fail and cause watchdog reboot

Solution:
reduce wait counter, and check clk register

Verify:
P215

Change-Id: Ic9d97e1eca9428ffd0c4a6bfe008cd9d8303075b
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
drivers/amlogic/cec/hdmi_ao_cec.h

di: aptimise di flow, add some protection [1/1]

PD#SWPL-3976

Problem:
To prevent “stall when access DDR through memory interface”

Solution:
1.aptimise NRWR register access flow
2.add arb on/off and status check
3.add reset protect
4.add nr_en disable before arb status check
5.add nr_write_done sel
6.modify VPU_WRARB_MODE_L2C1 from vlsi feijun's suggest

Verify:
tl1, txlx

Change-Id: Ifb0f4f0502d957ffb2b07805575c27f4166d5717
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
drivers/amlogic/media/deinterlace/deinterlace.c

omx: add print into level control [1/1]

PD#SWPL-85

Problem:
print into level control

Solution:
print into level control

Verify:
U212

Change-Id: Ib0fdc02f26e75c20e48171bca5ebef072947d78c
Signed-off-by: jintao xu <jintao.xu@amlogic.com>

omx: add two layer support [3/6]

PD#SWPL-85

Problem:
Need support two video layers feature

Solution:
1: Add videosync.
2: amlvideo support multi-instance

Verify:
U212

Change-Id: I3570fad361ba5bd388dd46c51a66da056fa7a1fd
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
MAINTAINERS
drivers/amlogic/media/deinterlace/deinterlace_hw.c

vpp: add osd and video zorder control [2/6]

PD#SWPL-85

Problem:
Upper layer need control osd and video layer zorder

Solution:
1.Add video layer zorder interface by sysfs and ioctl
2.Switch the osd and video layer order in vsync

Verify:
Verify on U212

Change-Id: Ic50e81784b865cc57e4ab9a63d74806f7a8721cf
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>

vpp: add two layers support for each chips [1/6]

PD#SWPL-85

Problem:
Need support two video layers feature

Solution:
1.Add vd2 mif config
2.Add vd2 pps calculation and config
3.Add vd2 axis/crop/screen mode interface by sysfs and ioctl
4.Add layer query/alloc/free interface

Verify:
Verify on U212

Change-Id: I71fc9ab2ae0230c3e84c4b790e77d2c790951642
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>

sr: add support for tl1 [1/1]

PD#172587

Problem:
Add sr driver support for tl1

Solution:
add sr driver support for tl1
fix horizontal line when play video on 4K screen

Verify:
TL1 X301

Change-Id: I422f27eb5cf12f69dc57de295425536671e2df38
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>

video: vpp: add vd afbc YUV 422/444 support for tl1 [1/1]

PD#172587

Problem:
Bringup TL1 vidoe driver.
TL1 need support YUV422/444 AFBC.
TL1 need check afbc source from decode or vdin.
TL1 need afbc compress loss mode.

Solution:
Merge from branch bringup/amlogic-4.9/tl1-20181111.

Verify:
verify on tl1

Change-Id: I0af62e7638db4e1c349df874ccffdeddcaa715af
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>

vpp: sr: disable core0 and core1 scaler latch [1/1]

PD#SWPL-3144

Problem:
The latch function cause the super scaler size asynchronous

Solution:
Disable sr core0 and core1 scaler latch

Verify:
T962x2 x301 board test pass

Change-Id: Iecbcc3e0c751093b6515f7b46973eca2157cd349
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>

dts: g12a/b: config hw rng with dts [1/1]

PD#OTT-2062

Problem:
Boot up time with power cable is longer than boot up with usb cable

Solution:
config hw rng with dts

Verify:
android p + u212

Change-Id: I61613e945dbc9be06f2cbb29aae5043c84fca1de
Signed-off-by: Chao Liu <chao.liu@amlogic.com>

osd: fix some fence issue [2/2]

PD#SWPL-3348

Problem:
fix some fence issue

Solution:
1. add blank operation to FBIOPUT_OSD_SYNC_RENDER_ADD
2. move canvas_config to osd_setting_blend

Verify:
verify by franklin

Change-Id: I5d1ebb697ff542e5c36dab0dae9b322ec4e1fa16
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>

hdmitx: sync hdmi_audio uevent to hdmi hpd

Change-Id: I39512030f058ab9c72ee4c779f3b692898440271
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>

ethernet: handle tx timeout

PD# 169839

After do suspend/resume circularly, sometimes ethernet can't recover from
suspend. Add a phy reset when every resume.

Change-Id: Id03223a9c62f4dcab1cdfbc4805cc3b4c0212cf5
Signed-off-by: Shen Liu <shen.liu@amlogic.com>

audio: fix samesource clk after play DDP [1/1]

PD#SWPL-4331

Problem:
Same source clk doesn't recover to 48K
after playback 192k DDP stream.

Solution:
Add ways to recover the clk.

Verify:
Local verified

Change-Id: If410d9ca04446c35bafebe2913b01e19b5fee224
Signed-off-by: Shuai Li <shuai.li@amlogic.com>

audio: audio glitch at tdm startup [1/1]

PD#SWPL-5219

Problem:
audio glitch at tdm startup

Solution:
Pad 0 data to clear the remaining data
in the module.

Verify:
Local tested.

Change-Id: Iab526c6893a32030799567b57e05e7bb11b8fea0
Signed-off-by: Shuai Li <shuai.li@amlogic.com>

tsync: do not operate tsync_mode_switch before first video toggled [1/1]

PD#SWPL-5131

Problem:
Some stream in tunnel mode, first audio pts is large than
AV_DISCONTINUE_THREDHOLD_MAX(60s). In audio_hw it will check pcr and
apts diff, so large difference between pcr and apts will lead sync mode
from amster to vmaster(egg:SYNC-HEVC-59FPS-DDP51)

Solution:
do not operate tsync_mode_switch before first video toggled

Verify:
verify by franklin

Change-Id: Icec2de71ea8f838146444aa3ea880f76ed8e0f13
Signed-off-by: Yingwei Long <yingwei.long@amlogic.com>

video: set vpp super_scaler default to 0 [1/1]

PD#SWPL-5113

Problem:
video flash when resolution change from 4K to 640x480

Solution:
temporary solution for video flash for u212

Verify:
verify by u212

Change-Id: I8b7ec009bf599032c7bff5f80b72b557403355da
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>

video: fixed video peek get first frame toggled err [1/1]

PD#SWPL-4048

Problem:
video peek can not get first frame toggled on 64bit

Solution:
add the cmd to amvideo_compat_ioctl

Verify:
verify on p212

Change-Id: I6933f305382d636f5f98f4bf19fddcf6ce9471c1
Signed-off-by: Jian Wang <jian.wang@amlogic.com>

hdmitx: eliminate the work of sdr effect when choosing hdr [1/1]

PD#SWPL-4079

Problem:
hdr->sdr must have 1.5s delay, when switching from sdr->hdr
the work queue can't be eliminated in time.

Solution:
eliminate the work of sdr effect when choosing hdr

Verify:
u212

Change-Id: I4c1d5467a58253ffa2fa12dfbac7f504d0388a00
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>

dts: g12a: add clk_81 to enable demux pcr [1/1]

PD#SWPL-4469

Problem:
dolby files have no sounds after replay

Solution:
in u212, the clk_81 is null when init, it is related
to demux pcr, so add clk_81 to enable demux pcr

Verify:
verify by franklin

Change-Id: Id862e4e8ac49c19bbd52fa6fa4831de20abad6c8
Signed-off-by: Cheng Tong <cheng.tong@amlogic.com>

isp: config temper buffer size in dts [1/2]

PD#SWPL-4177

Problem:
temper buffer size is a fixed value in code

Solution:
config temper buffer size from dts

Verify:
verify by w400

Change-Id: I17ef428221f149a888e0318bc27d7b7d309c00ce
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>

camera: support the dvp camera [1/1]

PD#SWPL-2133

Problem:
don't support dvp camera

Solution:
add dvp camera driver

Verify:
verify by u200

Change-Id: I8517913e0c3724247b396e8d054d6a4541a1993a
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>

camera: add dvp camera [1/1]

PD#OTT-1204

Problem:
don't support dvp camera

Solution:
add dvp camera gc2145 camera driver

Verify:
test pass on U200

Change-Id: I5927d49a93952587af7bb460a5c405293d692153
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Conflicts:
MAINTAINERS

video: video peek do not post video start event [1/1]

PD#SWPL-4317

Problem:
for video peek, before audio post audio start, video may have rended.

Solution:
do not post video start for video peek, all wait for audio start to
start pcr

Verify:
verify by p212

Change-Id: If5656154e30613164465f84c44d3fd1ee386d654
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>

arm64: dts: gxl: optimize ipa parameter [1/1]

PD#SWPL-3726

Problem:
game cannot run smoothly

Solution:
1:modify cooling devices min status
    cpufreq 1000Mhz-->1200Mhz
    gpufreq 400MHz -->500MHz
2:modify switch trippoint freq trippoint hotplug trippoint
    70000-->80000
    80000-->90000
    85000-->100000

Verify:
p215 pass

Change-Id: I36d8ac8ca578f92c8aeda7d979df1f3f56311ce3
Signed-off-by: Huan Biao <huan.biao@amlogic.com>

arm: dts: gxl: optimize ipa parameter [1/1]

PD#SWPL-3726

Problem:
game cannot run smoothly

Solution:
1:modify cooling devices min status
cpufreq 1000Mhz-->1200Mhz
gpufreq 400MHz -->500MHz
2:modify switch trippoint freq trippoint hotplug trippoint
70000-->80000
80000-->90000
85000-->100000
3:fix gpupp get fail issue

Verify:
p215 pass

Change-Id: Id0a1e1ac9619f0d9a20e2aad172ba0c84c7a2e9d
Signed-off-by: Huan Biao <huan.biao@amlogic.com>

osd: fix a green line displayed when output is yuv420 4k/60hz [1/1]

PD#SWPL-4427

Problem:
a green line displayed when output is yuv420 4k/60hz

Solution:
set dummy data to 0x808000 can fix a green line
displayed when output is yuv420 4k/60hz

Verify:
verify by fanklin

Change-Id: I06125d36c2fb06a61dd072a1789217e7c3705207
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>

sound: add resample node for axg_s420_v03gva.dts [1/1]

PD#SWPL-365

Problem:
System can't use resample function on GVA project.

Solution:
Add resample node in axg_s420_v03gva.dts

Verify:
Passed on s420

Change-Id: Ie48c579e9e9f6e1d61147f5410c95e5bca55b0a7
Signed-off-by: riqun.ou <riqun.ou@amlogic.com>
audio: codecs: fix TL1 reference board volume too small [2/2]

PD#SWPL-2652

Problem:
    X301/T309 AMP volume configured to small

Solution:
    change the default external AMP codec mixer name to a match
    the ini parsing function in audio hal.
    TODO: need dynamically check the different codec mixer name
    in ini file.

Verify:
    verify by x301

Change-Id: Iba835d37ea02bec3095556d54fbf327bd6390904
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
audio: codec: the DAC gain set of acodec not work [1/1]

PD#SWPL-3134

Problem:
the DAC gain set is not work

Solution:
update and aml_codec_tl1_acodec.c, change the method of
getting codec pointer from kcontrol pointer.

Verify:
verify by T962x2_X301 board

Change-Id: I02f02b73fab3b8391ef4866a71ffaf0d48bbbbbf
Signed-off-by: Shuyu Li <shuyu.li@amlogic.com>
audio: add tas5805 [1/1]

PD#SWPL-3081

Problem:
compatiable tas5805 module

Solution:
add tas5805 drivers

Verify:
T962X2

Change-Id: I3608e47fe768af0f924751a8bcc103389d0811de
Signed-off-by: Yonghao Jiao <yonghao.jiao@amlogic.com>
audio: auge: add HDMIRX SPDIF in support [1/2]

PD#SWPL-2956

Problem:
HDMI in DTS/Dolby input has noise when treated to LPCM

Solution:
By default,we are using PAO mode for HDMIRX,but we have not
enabled the PaPb search for 61937 raw data input, after add
that, we can detect the raw data, but it can not by clear when
switch from NONE-LPCM to NONE-LPCM, need add IRQ function to
clear that by sw.we enabled spdif in from HDMIRX, which is  the same
design as txl/txlx.we can get the Pc information now.
also we add a new interface to set spdif in source when hdmirx input.

Verify:
x301

Change-Id: I3c4e8b387308ef862a069c29d15b8b5a9e865564
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
udio: auge: tl1 acodec mapping to data 1 [1/2]

PD#SWPL-3277

Problem:
tl1 internal codec volume can by adjusted

Solution:
configure the acodec data layout mapping
to a fixed volume

Verify:
x301

Change-Id: I14d3762b39a0a5291722ef5489026f10fc960120
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/tl1_t962x2_t309.dts

audio: Fix TDM not wokring on HDMI I2S in [1/1]

PD#SWPL-2887

Problem:
  When TDM is used for HDMI I2S in, the solt set is wrong.

Solution:
  Fix the lane max value from 3 to 4

Verify:
  A113

Change-Id: I33f5ca21bf1e2407d83fa5d0f22e21f7b1f5e749
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
audio: codec: fix to resume ad82584's volume after suspend [1/1]

PD#SWPL-3456

Problem:
1) After suspend, volume is not resume
2) ARC connected, still sound out from spk

Solution:
1) save channel volume when suspend, then resume the volume
2) add mute mixer control for ad82584

Verify:
x301

Change-Id: Ic6e7502e3f9689cc2d1053295f26aaf4d5be2603
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
audio: auge: add vad driver [1/1]

PD#SWPL-2404

Problem:
VAD for wake up

Solution:
Add vad driver to fetch VAD buffer and ALSA buffer, in userspace, they
will be combined for wakeup engine

Verify:
x301

Change-Id: I3b4de5fdfe173ce18e58a187a3adeda601e226b3
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
audio: fix pop snd after bootup [2/2]

PD#SWPL-3178

Problem:
output big pop noise after system boot up.

Solution:
Add zero and then unmute the stream.
NOTICE: user should unmute the AD82584F after boot.

Verify:
local verified.

Change-Id: I21555318f9347c5340a28f7e5cf0e3e2cde849a0
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
audio: fix no audio after resume of ad82584f [1/1]

PD#SWPL-4090

Problem:
No audio after suspend and resume.
Suspend won't save the mute value,
and after resume, it could not be restored.

Solution:
Add a mute val to save when suspend,
and after resume, restore the mute value.

Verify:
Verified by QA.

Change-Id: Ie24bb11f5c565048391846a66b5d12bab1d55666
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
audio: auge: fix sharebuffer channel map [1/1]

PD#SWPL-2645

Problem:
play ddp source, then play pcm source, no sound

Solution:
1. fix same source control and channel map issue
2. i2s 8ch, spdif 2ch, channels are not mapped, make spdif 8 channel mask
3. when same source used, keep mpll use same mpll

Verify:
x301

Change-Id: I2fe4bbcbcbfff0a1c1a6cebf61d1da5aba9b7a9d
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/tl1_t962x2_t309.dts
arch/arm64/boot/dts/amlogic/tl1_t962x2_x301.dts

audio: add stream mute and continuous clk [1/1]

PD#SWPL-2952

Problem:
Pop noise could be heard
when switching between sources.

Solution:
1. Add stream digital mute functions.
2. continuous clock to eliminate
  the clk reset issue.

Verify:
Local verified.

Change-Id: I372f4c03aaf875d75aa903c9c2dfda00619af000
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
dts: tl1: enable resample for tl1 [1/2]

PD#SWPL-3365

Problem:
not resample for audio in, so output in wrong sample rate

Solution:
1. enable resample in dts
2. fix to check whether resample is needed

Verify:
x301

Change-Id: I99238cc21a00ab53df6a1f8ab1703bc9ab48cbaa
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/tl1_t962x2_t309.dts
arch/arm64/boot/dts/amlogic/tl1_t962x2_x301.dts

video: omx get first frame toggoled flag [1/2]

PD#SWPL-4048

Problem:
omx can not detect first frame have toggled

Solution:
omx get first frame toggoled flag

Verify:
verify by p212

Change-Id: I632824390287dd0257dca23a009ff8851054f68d
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>

dv: keep dv enable when connecting to sdr TV [1/1]

PD#SWPL-3226

Problem:
turn off the dv core, the osd flutters

Solution:
keeping core2 open when dv enable under sdr TV

Verify:
u212

Change-Id: Idf57c6e67676fb5eec944e543cb596247c932df4
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>

hdmitx: fixed logo flash error [1/1]

PD#SWPL-4194

Problem:
array need to initial.

Solution:
fixed it.

Verify:
verify by ampere

Change-Id: Ia72eb1afa54f092bbbb7265694ecec314691b14e
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>

hdmi: fix uboot logo flash [1/2]

PD#SWPL-4194

Problem:
Systemcontorl set display mode when attr is difference

Solution:
Fix color space property parser

Verify:
G12A/U200

Change-Id: Iddbcbbf3925b175833f534a287de413315ca1170
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>